Diese Website verwendet Cookies. Durch die Nutzung der Website stimmen Sie der Verwendung von Cookies zu.
OK
 

Plastik Modelle

1:72 Republic F-84G Thunderjet

Art.-Nr.: 300060745

Art.Nr.: 300060745
Artikelbezeichnung: 1:72 Republic F-84G Thunderjet

Towards the end of World War II, information about advanced aeronautical technology was captured in Germany by the U.S. Forces. One of them was an analysis of the studies carried out by Dr. Alexander Lippisch on delta winged aircraft. Based upon the information, the Douglas firm developed the F4D Skyray, the only operational interceptor with delta wings in the U.S. Navy. Starting the design in 1947, Douglas was awarded a contract for the construction and testing of two prototypes in December 1948. The first prototype took off on its maiden flight in January 1951. The second prototype flew shortly thereafter, and the airframe set two new world records, absolute speed record of 1,211 km/h and 100km closed course record of 1,171km/h, in October 1953. Having numerous improvements and refinements, the first production F4D-1 made its maiden flight in June 1954 and entered squadren service in April 1956. The distinctive 50 degree sweptback wings with round tips were equipped with leading edge slats and trailing edge elevons. A set of trimmers were installed on the inboard trailing edges of the wings. The outer portions of the wings could be folded upwards by oil pressure for carrier stowage. Although the Skyray never saw any combat, it proved its high capability as an interceptor with numerous world records and scramble actions in Taiwan in response to crises in the late 1950's.

Detailierter Plastikmodellbausatz des Modells
Republic F-84G Thunderjet
im Maßstab 1:72

1:72 Skyray

Art.-Nr.: 300060741

Art.Nr.: 300060741
Artikelbezeichnung: 1:72 Skyray

Towards the end of World War II, many information about advanced aeronautical technology were captured in Germany by the U.S. Forces. One of them was an analysis of the studies carried out by Dr. Alexander Lippisch on delta winged aircraft. Based upon the information, the Douglas firm developed the F4D Skyray, the only operational interceptor with delta wings in the U.S. Navy. Starting the design in 1947, Douglas was awarded a contract for the construction and testing of two prototypes in December 1948. The first prototype took off on its maiden flight in January 1951. The second prototype flew shortly thereafter, and the airframe set two new world records, absolute speed record of 1,211 km/h and 100km closed course record of 1,171km/h, in October 1953. Having numerous improvements and refinements, the first production F4D-1 made its maiden flight in June 1954 and entered squadren service in April 1956. The distinctive 50 degree sweptback wings with round tips were equipped with leading edge slats and trailing edge elevons. A set of trimmers were installed on the inboard trailing edges of the wings. The outer portions of the wings could be folded upwards by oil pressure for carrier stowage. Although the Skyray never saw any combat, it proved its high capability as an interceptor with numerous world records and scramble actions in Taiwan in response to crises in the late 1950's.

Detailierter Plastikmodellbausatz des Modells
Skyray
im Maßstab 1:72

1:32 US VOUGHT F4U-1A Corsair

Art.-Nr.: 300060325

Art.Nr.: 300060325
Artikelbezeichnung: 1:32 US VOUGHT F4U-1A Corsair

This is a highly detailed model recreating the F4U-1A variant of the highly popular Corsair model. Newly-designed parts are included in the kit to accurately capture the modifications which distinguish it from the original F4U-1. The F4U-1A drew on the experience of Navy and US Marine Corps pilots' experience with the original aircraft, making modifications to further improve the performance of this legendary bird.

One of the most noticeable alterations was the discarding of the "birdcage" cockpit and its extensive frame sections that hampered visibility; a semi-bubble canopy with minimal frame was installed instead, which improved the pilot's view and made it easier to land the F4U-1A. Additional upgrades included raising the pilot's seat 18cm to help with visibility, and later extending tail wheel struts by 16.5cm. A wedge shaped spoiler was added to the starboard wing to correct the tendency of the port wing to stall first and roll out of control.

Such modifications contributed greatly to the F4U-1A's suitability for use from aircraft carriers; although by this time it had been passed over for that duty by the F6F Hellcat. Unlike its predecessor, the F4U-1A would later be used as fighter-bomber, and was given the capability of carrying a drop tank under the fuselage, plus a bomb rack for use on raids supporting ground troops. This combination of fearsome performance in the air and bombing capability made the F4U-1A a vital component as the Allied forces conducted their 'island hopping' strategy progressing through the Solomon Islands.

1:32 Mits.A6M2b ZERO Fighter 21

Art.-Nr.: 300060317

Art.Nr.: 300060317
Artikelbezeichnung: 1:32 Mits.A6M2b ZERO Fighter 21

About the Mitsubishi A6M2b Zero Fighter Model 21 (Zeke)

The Japanese Zero Fighter plane was widely feared and respected by friend, foe and all who came into contact with it. A triumph of aerodynamic engineering and military science, the Zero Model 21 served in the skies across East Asia during early stages of World War II, contributing immensely to the Japanese war effort. It remains today an enduring symbol of that fierce and globe-spanning conflict.

About the model

•1/32 scale assembly kit of the Model 21 Zero Fighter. Length: 283mm, Width: 375mm.
•Accurately reproduced curved cowling and fuselage are modeled from slide molding to accurately depict rivets and surface texture.
•Realistically replicated Nakajima "Sakae" type 12 engine features propeller reduction unit, exhaust pipe and other detailed parts.
•Both folded and extended wing tips included and can be used interchangeably even after assembly.
•Durable and precision detailed metal parts depict landing gear system and pitot tube.
•Seat belt incorporates photo-etched parts for extra realism.
•Retractable landing gears increase display possibilities, while allowing model to be easily stored in package after assembly.
•Features movable landing gears, rudder and flaps.
•Includes standing and seated pilot figures and seven types of markings for planes which participated in Pearl Harbor attack.
•Includes parts to depict any variation of Mitsubishi and Nakajima-built Zero Model 21.
•Comes with wheel chocks and access steps. Includes posable display stand.

1:32 Grumman F-14A Tomcat Black Knights

Art.-Nr.: 300060313

Art.Nr.: 300060313 Artikelbezeichnung: 1:32 Grumman F-14A Tomcat Black Knights

About the Grumman F-14A Tomcat "Black Knights"

Ever since its first flight in 1970, the U.S. Navy's F-14 Tomcat has been one of the best top Air Defense Fighter. From 1990, in addition to its role as an interceptor, the F-14A, noted for its long range and superior weapons systems was designated as an air-to-ground strike plane. With this new role, the Tomcat was fitted with a new weapons arsenal. Since 1996, the F-14A employs the AN/AAQ-14 targeting pod, referred to as the LANTIRN. This targeting pod gives the F-14A precision bombing capability by procuring targets for nose-mounted infrared laser or other laser guided weapons. The AN/AAQ-14 targeting pod contains a high-resolution, forward-looking infrared sensor (which displays an infrared image of the target to the pilot), a laser designator-rangefinder for precise delivery of laser-guided munitions, target tracking software, and more. The LANTIRN, combined with GBU-16 and GBU-24 guided bombs, enables precision striking with a minute margin of error from several meters down to tens of centimeters. This precision can be realized at long-range. The VF-154 Black Knights is attached to the USS Kittyhawk, homeported at Yokosuka Harbor, Japan. The Black Knights were formed after WWII, and were deployed to both the Korean and Vietnam War. F-14A were employed with the VF-154 from 1984, and used extensively in Operation Desert Shield during the Gulf War in 1990.

About the model

• Fighter-Bomber Grumman F-14A Tomcat plastic assembly kit.
• 1/32 Scale •Overall length: 598mm, Overall width: 612mm.
• The form of the aircraft has been accurately rendered.
• Kit employs metallic parts and screws to make the wing movable.
• A full range of armament including Phoenix missiles,
  GBU-16 and GBU-24 laser guided bombs are provided as well
  as a AN/AAQ-14 LANTIRN targeting pod.
• Includes 3 figures, 2 pilots and a catapult officer, and decals for
  5 aircraft. 

 

Achtung! Nicht für Kinder unter 14 Jahren geeignet.

1:32 Bo.F-15E Strike Eagle Bunker Buster

Art.-Nr.: 300060312

Art.Nr.: 300060312 Artikelbezeichnung: 1:32 Bo.F-15E Strike Eagle Bunker Buster

About the Boeing F-15E Strike Eagle w/"Bunker Buster"

The McDonnell Douglas F-15 Eagle is regarded as one of the most capable twin-engine air-superiority fighters in the world today. Ever since its maiden flight in July 1972, this record breaking Mach 2.5 fighter has been a yardstick for jet fighter design. In the early 1980's, the Air Force requested McDonnell Douglas to modify their F-15 fighter into a dual-role aircraft to be known as the F-15E "Strike Eagle" for use as an air-to-air fighter, and for air to ground attack missions. This new version was designed to penetrate deep into enemy territory unescorted, and strike military targets with pinpoint accuracy. The strike eagle employs two highly reliable Pratt & Whitney F100-PW-229 engines and was designed specifically as a two-person crew of pilot and weapons system officer. The LANTRIN (Low Altitude Navigation and Targeting Infra-Red for Night) system enables the Strike Eagle to operate at night and in bad weather. The Strike Eagle can also be employed with up to an 11-ton payload and can carry the GBU-28 Bunker Buster, a guided bomb developed to destroy strengthened underground bunkers. The Strike Eagle was first deployed in December 1989. During the Gulf War in 1991, 2 squadrons of 48 F-15E Strike Eagles demonstrated their power as multi-purpose fighter/attack planes.

About the model

The popular F-15E Strike Eagle (item 60302) was released in 1993. However, since this items release, the F-15E has come to be equipped with a variety of newly developed weapons systems. Following the changes in times and aviation fighting technology Tamiya has modernized its kit to feature accurate replicas of all the latest weapons systems employed by the F-15E Strike Eagle. Includes parts for replication of the GBU-28 "Bunker Buster", as well as AGM-130 and JDAM guided bombs, and ARAAM air-to-air missiles. 1/32 scale, total length 600, total width 404mm. Faithfully recreates intrepid form of Strike Eagle. Main parts such as fuselage and wings are to be fastened with screws.Radar unit/nose side-access panel, and Vulcan Cannon hatch can all be opened and closed after assembly. Canopy and air brakes can be assembled in either the up or down positions. Cockpit, radar, and Vulcan Cannon are all recreated down to the finest details. Each landing gear is brilliantly crafted in die-cast, and tires are fashioned with synthetic rubber.Each landing gear is brilliantly crafted in die-cast, and tires are fashioned with synthetic rubber.
 

 

Achtung! Nicht für Kinder unter 14 Jahren geeignet.

1:32 F-4E PHANTOM II EARLY PROD.

Art.-Nr.: 300060310

Art.Nr.: 300060310 Artikelbezeichnung: 1:32 F-4E PHANTOM II EARLY PROD.

About the McDonnell Douglas F-4E Phantom II Early Production

The F-4E came into production as an improved version of the F-4C/D and was to be the most advanced model of the Phantom series. After elongating the fighter's nose and installing a more compact radar, the solid-state Westinghouse AN/APQ-120, the installation of a nose-mounted gun became possible and a 20mm M61A1 6 barrel Vulcan gun pod was employed. The Vulcan 20mm cannon, with its ammunition drum of approximately 640 rounds, was capable of firing 4000-6000 rounds a minute and proved reliable in air-to-ground and close quarters aerial combat. F-4E made its first flight in June 1967 and entered the rising conflict of the Vietnam War in November 1968 when the first F-4E's reached Korat in Thailand and joined up with the 469th Tactical Fighter Squadron. By the time of the cease-fire of 1973 the F-4E was credited with a total of 21 MiG kills, 5 brought down by gunfire alone.

About the Model

•Assembly kit of the early production version of the F-4E Phantom II main fighter of the U.S. Airforce. •Scale: 1/32, fuselage length: 600mm, wingspan: 368mm. The intrepid form of the F-4E Phantom with its characteristically elongated nose, has been accurately reproduced. •Fuselage has been molded as one piece with intricate areas faithfully recreated. Main pieces can be fastened to fuselage with screws. •Plane's nose can be reproduced with clear parts to allow viewing of the details of the 20mm M61A1 6 barrel Vulcan gun pod and AN/APQ-120 radar after model assembly. •Exquisite detail of cockpit and instrument panels portrayed in superb detail. Canopy can be assembled in the open or closed position. •Landing gear reproduced with dye-cast parts and tires are recreated with real rubber. •Parts for recreation of full armament, such as air-to-air missiles, are included in kit. Kit also features pilot and co-pilot figures as well as decals for replication of  two different planes.

 

Achtung! Nicht für Kinder unter 14 Jahren geeignet.

1:32 F-4J PHANTOM II MARINES

Art.-Nr.: 300060308

Art.Nr..: 300060308
Artikelbezeichnung: 1:32 F-4J PHANTOM II MARINES

About the McDonnell Douglas F-4J Phantom II Marines

When test pilot Robert C. Little prepared to take off in the YF4H-1 prototype on May 27, 1958, few onlookers could have guessed at the success story yet to unfold. Over thirty years from that faithful day, the successors of that prototype, the Phantom series of aircraft, would be protecting the skies over the free world and see adoption by eleven nations including the U.S. Navy, Air Force and Marines. The Phantom II was developed by McDonnell Douglas and first pitted against Vought's F8U-3 Crusader III to see which aircraft would be the Navy's next main carrier-borne fighter. In 1959, the selection was made in favor of the robust Phantom II. The early production model, the F4H-1F, underwent various tests and training exercises, eventually leading to the F4H-1 model, which was deployed to several Navy and Marine divisions. In 1962, in efforts to unify the names of Navy and Air Force aircraft, the F4H-1F and F4H-1 became designated the F-4A and F-4B respectively.

Just after its adoption by the Navy, the Phantom II showed the world what it was made of, breaking record after record, including top-speed, altitude, and time-to-climb. To top off these results, the U.S. Navy ran Project LANA, a transcontinental speed race. The roman L stood for the number 50, for "50th Anniversary of Naval Aviation". The contest was to demonstrate the Phantom's shocking speed and reach. Based on this impressive track record, and on comparative tests against Air Force fighters at the time, it was decided that the next main fighter of the Air Force would also be the Navy's Phantom II. The F-4B version was specially tailored to the needs of the Air Force, and became designated the F-4C. Further improvements to that aircraft resulted in the F-4D model.

The Navy continued to make improvements to the Phantom II. Mounting the F-

1:32 Mc Donnell DOUGLAS F-15 EAGL

Art.-Nr.: 300060304

Art.Nr.: 300060304
Artikelbezeichnung: 1:32 Mc Donnell DOUGLAS F-15 EAGL

About the McDonnell Douglas F-15C Eagle

At one time during the missile boom years, the U.S. Air Force believed future air battles could be decided by air-to-air missiles rather than guns in the traditional dog-fighting manner. The need for air superiority weapons was relearned during the Vietnam Conflict and led to an Air Force requirement for an all-weather, single-seat, twin-engined fighter. This aircraft was to optimize counter-air operations.

The U.S. Air Force requested several manufacturers to study and develop prototypes during the late 1960's under the FX program (Fighter Experimental). McDonnell Douglas was awarded a contract to develop the F-15 Eagle jet fighter in December 1969. The Eagle's advanced aerodynamic design greatly reduced drag at both the low and high lift configurations, and achieved superior maneuverability during varying flight conditions.

Making its maiden flight in July 1972, it was deployed in November 1974 as the F-15A Eagle, and had been in active service since then. It is powered by two Pratt & Whitney F100 afterburning turbofan engines developed exclusively for the for the F-15, and is capable of speeds in the Mach 2.5 range. The F-15 can carry a heavy load of devastating weapons, including the internally mounted 20mm M61A-1 Vulcan cannon, with 940 rounds of ammo, the AIM-7 Sparrow radar guided missile and AIM9 Sidewinder short range air-to-air missile. In 1979 an upgraded version of the Eagle was introduced as the F-15C. One notable change was the increase in fuel capacity, but even more fuel was made possible by the conformal fuel tanks, which snuggle between the wings and up against the jet inlet ramps. This increase in fuel capacity enables the Eagle to expand long range operations, such as escorting AWACS and strike aircraft to their targets. The Landing gear has been reinforced to accept the extra fuel

 

Achtung! Nicht für Kinder unter 14 Jahren geeignet.

1:16 WWII Wehrmacht Offizier

Art.-Nr.: 300036315

1:16 JGSDF Panzer Typ 10 (Standmodell)

Art.-Nr.: 300036209

Art.Nr.: 300036209
Art.bezeichnung: 1:16 JGSDF Panzer Typ 10 (Standmodell)

10 out of 10 for Accuracy
This epic 1/16 scale plastic display model assembly kit owes its highly accurate recreation of the Type 10's form to the extensive cooperation of the Japan Ground Self Defense Force (JGSDF). From the 120mm smoothbore gun to the svelte angular armor and modern turret, this model gets the details of this state-of-the art tank spot on. It also features realistic non-slip surface textures. An aluminum barrel forms the centerpiece of the accurate depiction of the main gun. With metal parts used to recreate the chassis, drive sprockets and suspension arms, the model has an authentic weighty feel. A commander torso figure is included to further raise the realism. 3 marking options recreate JGSDF units.

Introducing the Type 10 Tank
Officially approved in 2010, the Type 10 reflects the latest military technology and needs of the modern Japan Ground Self Defense Force. The state-of-the art tank features a L/44 120mm smoothbore main gun with stabilizers, and an automatic target tracking system that functions with tremendous accuracy even when the Type 10 is on the move. Compatibility with the C4I (command, control, communications, computers, and intelligence) system ensures units operate in harmony. A 1,200hp diesel engine and continuously variable transmission secure impressive mobility with the hydraulic semi-active suspension. Modular armor sections on the hull and turret provide top level protection, and can be removed to allow swift transportation of the tank. Deployment began in 2012, as the JGSDF looks to phase in the Type 10, in place of the Type 74.

Detaillierter Plastikmodellbausatz des Modells
GSDF Panzer Typ 10 (Standmodell)
im Maßstab 1:16

1:35 Franz. KPz Leclerc Serie 2

Art.-Nr.: 300035362

Art.Nr.: 300035362 Art.bezeichnung: 1:35 Franz. KPz Leclerc Serie 2

• This is a 1/35 scale plastic model assembly kit. Length: 306mm.
• Road wheels now come as molded plastic components. Please note that other parts are features remain the same as on Item 35279, except for slightly updated instructions and package.
• The Leclerc is captured with exceptional detail, including Series 2 specific smoke dischargers, stowage boxes, short and long snorkels, and air conditioning unit.
• French developed 120mm smoothbore gun with thermal sleeve is accurately reproduced.
• Clear parts recreate headlights, taillights and periscope lenses.
• Rear hull includes finely detailed engine grille and surface imperfections reproducing the non-slip finish of the actual tank. Other details include tow cable, external fuel tank, fuel tank pipe stay and fuel tank stays.
• Commander's post features rotating sight and a commander figure.
• Features 4 marking options, three in the 3-color NATO camouflage, and one in desert colors. See next page.
• Compatible with Item 35280, a dedicated photo-etched parts set for the Tamiya 1/35 Leclerc Series 2.

With 4 marking options included (these are unchanged from those in Item 35279):

Option A: 2nd Armored Brigade, 6th - 12th Cuirassier Regiment, 3/6 Squadron, France 2004

Option B: 2nd Armored Brigade, 6th - 12th Cuirassier Regiment, Rapid Reaction Platoon, France 2004

Option C: 2nd Armored Brigade, 6th - 12th Cuirassier Regiment, 1/12 Squadron, France 2004

Option D: Technical Section of the French Armée de Terre (Army), Qatar 1998

 

Achtung! Nicht für Kinder unter 14 Jahren geeignet.

1 2 3 4 5 6 7
nach oben