Tamiya Accessories

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300074155
Product: HG Tweezers Grip Tip

• HG Tweezers (Grip Type Tip) x1
• Tweezers are crafted in stainless steel.
• The use of 4 extrusions on the tip is a relatively unique design, and allows for secure grip of small components such as shafts and wire.

Warning! Not suitable for children under 14 years.

Article number: 300074154 Product: Modeling Template RR 1-6

Tamiya's engraving needle is a fine addition to any modeler's tool kit, allowing scribing of fine, precision lines. Now, you can use them to scribe rounded rectangles with ease thanks to this new set of photo-etched stainless steel template sheets, which follows on from the round templates in Item 74150.

Item Contents/Information

• Photo-Etched Template Fret x1
• The fret includes 3 sheets of rounded rectangle templates ranging from 1mm to 6mm in width, and 1.5mm to 12mm in length. The smallest measures 1mm x 1.5mm, and the largest 6mm x 12mm.
• Templates are manufactured in 0.1mm thickness stainless steel, allowing you to bend it against convex surfaces such as aircraft fuselage pieces (minimum target component radius is 30mm).

Warning! Not suitable for children under 14 years.

Article number: 300074153
Product: Craft Knife II

• The handle has an ergonomic shape designed for ease of use and replacement of blades, etc. It is molded in easy grip black plastic, with the Tamiya Craft Tools logo in white. A clip is designed into the back.
• A stainless steel blade has impressive resistance to rust. Simply remove, turn over and reset if you are lefthanded.
• The end of the handle has a part that is detached by squeezing the tabs on either side and can be used to snap off dulled blade sections.
• Features an auto-lock function to stop the blade slipping and the inherent dangers that brings.

Warning! Not suitable for children under 14 years.

Article number: 300069930 Product: Modeler's Knife White

Here comes another option for that modeling essential, the Tamiya Modeler's Knife - this time, with a white grip!

• This Modeler's Knife is a classic Tamiya item. It is ideal for
   tasks required in static model assembly such as eliminating
   parting lines and excess gate plastic, as well as shaping putty.
• This special edition version features a grip in pristine white.
• Replacement blades (25pcs.) included.

Warning! Not suitable for children under 14 years.

Article number: 300069929 Product: Side Cutter α Orange

Side cutters are a necessity for the static and R/C modeler, and this popular Tamiya tool now receives a special edition release with cheery orange grips.

Item Contents/Information

• This Modeler's Side Cutter is for use with plastic parts.
• The side of the cutter jaw features "FOR PLASTIC"
   laser inscribed.
• The cutter's blades will remain sharp for a long period of time
   as they are made with carbon tool steel.
• Comfortable orange elastomer grips have the famous
   Tamiya twin star logo and product name imprinted on them.

Warning! Not suitable for children under 14 years.

Article number: 300054927
Product: Lunch Box Mini Clear Body

This is an unpainted version of the body parts for the Lunch Box Mini (Item 57409). If you damaged your body with crazy wheelie driving, or just want an alternative paint job to the pre-painted yellow version, this is the product for you!

• Lightweight and durable 0.8mm thickness polycarbonate.
• Includes stickers to decorate the body and paint masking stickers for use in the painting process.
• Body catches are not included.
• Compatible with SW-01 chassis models.

Warning! Not suitable for children under 14 years.

Article number: 300054925 Product: 630 Ball Bearings *8

Ball bearings are an excellent first step when tuning up your chassis from box stock, providing more efficient drive and longer lasting fun thanks to less wear and tear on moving parts. The 630 ball bearings in this set are for use in the reduction gears on the G6-01TR and GF-01TR chassis.

Item Contents/Information

• 630 Ball Bearings x8
• For use in the reduction gears on G6-01TR and GF-01TR chassis
   models. Each reduction gear requires two 630 ball bearings –
   sixteen total (two of this set) to kit out the GF-01, or twenty-four
   (three of this set) to kit out the G6-01.
• Compatible with GF-01TR and G6-01TR chassis cars.

Warning! Not suitable for children under 14 years.

Article number: 300054924 Product: GF-01 Full Ball Bearing Set

Highly efficient, smooth power awaits with the installation of this set of ball bearings that includes just the right number to fully kit out the GF-01 chassis.

Set Contents/Information

• 1150 Ball Bearings x24
• 850 Ball Bearings x2
• Install in place of kit standard plastic and metal bearings.
• Compatible with GF-01 chassis models.

Warning! Not suitable for children under 14 years.

Article number: 300054923 Product: TB-05 Adjustable Ackerman Set

Fine-tuning your Ackerman steering angles can make all the difference to your chassis handling, and that is exactly what you can do with this new adjustable set for the TB-05 PRO chassis. The mainly aluminum components allow three different Ackerman settings to experiment with.

Set Contents/Information

• The aluminum steering arms and bridge in this set can
   be used to replace kit-standard plastic steering linkage parts.
• 3 Ackerman settings are available: kit-standard / intermediate /
   aggressive. These are achieved by interchanging the three
   included bearing holder components, which have holes of
   different offsets.
• The aggressive setup is roughly equivalent to that of the
   TA07 PRO chassis, with superior initial steering response.
• Aluminum parts have the iconic Tamiya blue anodized finish.
• Compatible with TB-05 PRO chassis cars.

Warning! Not suitable for children under 14 years.

Article number: 300054918 Product: T3-01 C Parts Red

Give your T3-01 chassis model a bit of a makeover with these racy red versions of the C parts!

Item Contents/Information

• C Parts (Red) x1
• The C Parts sprue contains frame components,
   R/C and auxiliary decks, battery holder parts and more.
• Compatible with T3-01 chassis models.

Warning! Not suitable for children under 14 years.

Article number: 300054917 Product: T3-01 C Parts White

Give your T3-01 chassis model a bit of a makeover with these pristine white versions of the C parts!

Item Contents/Information

• C Parts (White) x1
• The C Parts sprue contains frame components,
   R/C and auxiliary decks, battery holder parts and more.
• Compatible with T3-01 chassis models.

Warning! Not suitable for children under 14 years.

Article number: 300054916 Product: T3-01 A Parts Red

Give your T3-01 chassis model a bit of a makeover with these racy red versions of the A parts!

Item Contents/Information

• A Parts (Red) x1
• The A Parts sprue contains parts for the model’s gearbox,
   transponder stay, rear fender and more.
• Compatible with T3-01 chassis models.

Warning! Not suitable for children under 14 years.

Article number: 300054915 Product: T3-01 A Parts White

Give your T3-01 chassis model a bit of a makeover with these pristine white versions of the A parts!

Item Contents/Information

• A Parts (White) x1
• The A Parts sprue contains parts for the model’s gearbox,
   transponder stay, rear fender and more.
• Compatible with T3-01 chassis models.

Warning! Not suitable for children under 14 years.

Article number: 300054911 Product: Dual Rider LW Body

This is a lightweight version of the Dual Rider body from assembly kit Item 57407. Made from 0.8mm polycarbonate as opposed to the standard 1.0mm, it will give your model enhanced stability and nimble handling.

Set Contents/Information

• The Dual Rider form is recreated in 0.8mm thickness
   polycarbonate.
• Marking stickers, plus masking stickers for use when
   painting are included.
• Compatible with T3-01 chassis models.

Warning! Not suitable for children under 14 years.

Article number: 300054910
Product: CC-02 Full Ball Bearing Set

Ball bearings are a great first step in tuning your chassis, giving smoother, more efficient power and longer running times in addition to reducing wear and tear on your machine. This handy set includes the right number to fully complete your CC-02 chassis.

• 850 Ball Bearings x2
• 1150 Ball Bearings x16
• 1260 Ball Bearings x2
• 1510 Ball Bearings x2
• Compatible with CC-02 chassis models

Warning! Not suitable for children under 14 years.

Article number: 300054909 Product: M-08 Concept Carb DS TRF Dpr

Make your M-08 Concept chassis car compatible with high-performance TRF dampers using the rigid and lightweight 3mm thickness carbon fiber damper stays in this set.

Set Contents/Information

• Carbon Damper Stay (Front) x1
• Carbon Damper Stay (Rear) x1
• Damper stays have more holes (Front: 4 each side,
   Rear: 6 each side) than kit standard parts, for greater
   freedom of setup.
• Small parts for attachment are also included.
• Compatible with M-08 Concept chassis cars and
   TRF dampers 53571, and 42102.

Warning! Not suitable for children under 14 years.

Article number: 300054905 Product: TB-05 Alu. R Damper Stay Mt

Give your TB-05 PRO chassis a firm rear with this aluminum damper stay mount, that promises to provide more secure damper stay attachment.

Item Contents/Information

• TB-05 Aluminum Rear Damper Stay Mount x1
• Provides more secure damper stay attachment and
   ensures your fine setup adjustments are realized in
   the rear damper performance.
• Lightweight, durable aluminum component has the iconic
   Tamiya blue anodized finish.
• Use in place of kit standard T2 part.
• Compatible with TB-05 PRO chassis cars.

Warning! Not suitable for children under 14 years.

Article number: 300054904 Product: TB-05 1pc. Motor Plate

This brand new TB-05 PRO chassis component is an integrated alternative to the separated kit standard motor plate and motor spacer parts, offering secure motor attachment and enhanced overall chassis rigidity.

Item Contents/Information

• TB-05 One-Piece Motor Plate x1
• Aluminum component has the iconic Tamiya blue
   anodized finish.
• Use in place of kit standard motor plate and motor
   spacer parts.
• Compatible with TB-05 PRO chassis cars.

Warning! Not suitable for children under 14 years.

Article number: 300054903 Product: TB-05 Alu. Spur Gear Holder

A lighter, reliable drivetrain awaits with the release of this aluminum spur gear holder for the TB-05 PRO chassis!

Item Contents/Information

• TB-05 Aluminum Spur Gear Holder x1
• This lightweight (2.6g) aluminum component can be
   used in place of the kit-standard steel part (7.1g) for a
   weight savings of approximately 4.5 grams.
• A hard anodized coating is applied for exemplary durability.
• Compatible with TB-05 PRO chassis cars.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300054758 Product: M-07C Titanium ScrewSet

Durable titanium screws are roughly 50% lighter than kit standard steel ones, and lighten chassis by around 17g while maintaining its rigidity.

Set Contents

- 3x8mm Countersunk Hex Screws x22
- 3x10mm Countersunk Hex Screws x2
- 3x6mm Hex Screws x4
- 3x8mm Hex Screws x38
- 3x10mm Hex Screws x5
- 3x15mm Hex Screws x4
- 3x20mm Hex Screws x4

Compatible Chassis M-07 Concept

Warning! Not suitable for children under 14 years.

Article number: 300051646
Product: TRF420 Rear Belt (62T)

• TRF420 Rear Belt (62T) x1
• This belt is made from reinforced, stretch-resistant material.
• It is recommended to change belts periodically to maintain optimum performance.
• Compatible with TRF420 chassis cars.

Warning! Not suitable for children under 14 years.

Article number: 300051645
Product: TRF420 K Parts (Bearing Hldrs)

• TRF420 K Parts x1
• Bearing holders (employed on gear diff and front direct pulley) redesigned for the TRF420 chassis, in order to provide even more precise location and a super-smooth drivetrain.
• Compatible with TRF420 chassis cars.

Warning! Not suitable for children under 14 years.

Article number: 300051644
Product: TRF420 B Parts (Bumper)

One too many crashes? Not a problem! Tamiya has this spare bumper designed as a replacement part for the TRF420 kit.

• TRF420 B Parts x1
• The bumper design has been altered so as not to impact upon the chassis’ roll characteristics.
• New body mounts are 2mm offset; change their attachment position for different body mount location to fine-tune your car's center of balance.
• Compatible with TRF420 chassis cars.

Warning! Not suitable for children under 14 years.

Article number: 300051643
Product: TRF420 Diff Pulley&Case (37T)

This is a spare pulley plastic part for the TRF420 racing chassis machine. Use it to replace worn out pulleys in your drivetrain to keep your car running efficiently and smooth.

• TRF420 37T Differential Pulley x1
• TRF420 Differential Case x1
• 0.2mm & 0.3mm Shims x2 each
• The new design not only provides a weight savings of 1.5g, but also provides less oil leakage compared to previous designs.
• Compatible with TRF420 and TA07 chassis cars.

Warning! Not suitable for children under 14 years.

Article number: 300051642
Product: TRF420 F Direct Pulley (37T)

This is a spare front direct pully component to the TRF420. Use this item to replace damaged or worn parts in your drivetrain.

• TRF420 Front Direct Pulley x1
• 0.2mm & 0.3mm Shims x2 each
• Front direct pulley and direct holder are an integrated plastic part for a weight savings of 2g compared to separate parts used on previous generation of TRF chassis.
• Direct cups are now screw-attached (was 2x9.8mm pins on previous chassis), allowing their replacement without the need to remove the direct pulley component.
• Compatible with TRF420 and TA07 chassis cars.

Warning! Not suitable for children under 14 years.

Article number: 300051641
Product: TRF420 F Parts 4deg HC

These are spare hub carrier parts for the TRF420 racing car chassis. They are an improved and more durable design compared to the previous design found in the TRF417/418/419 era of cars.

• TRF420 F Parts x1
• Components are molded in carbon fiber-reinforced plastic for superior rigidity.
• The design was revised specifically for the TRF420 chassis, with greater resistance to shocks and crashes.
• Upper and lower flanged tubes are now identical.
• For use with 3mm diameter shafts (sold in Item 51637).
• Compatible with cars using Item 51639 TRF420 D Parts (Suspension Arms).

Warning! Not suitable for children under 14 years.

Article number: 300051640
Product: TRF420 E Parts Rear Uprights

These are spare rear upright parts for the TRF420 racing car chassis.

• TRF420 E Parts x1
• Components are molded in carbon fiber-reinforced plastic for superior rigidity.
• Bearing positions are precisely aligned for maximum efficiency.
• For use with 3mm diameter shafts (sold in Item 51637).
• Compatible with cars using Item 51639 TRF420 D Parts (Suspension Arms).

Warning! Not suitable for children under 14 years.

Article number: 300051639
Product: TRF420 D Parts Sus Arms

These are spare suspension arm parts for the TRF420 racing chassis kit.

• TRF420 D Parts x2
• Components are molded in carbon fiber-reinforced plastic for superior rigidity.
• The tweaked design uses aluminum inserts for damper attachment. Using different inserts (sold separately) allows adjustment of lever ratio, with three different setups possible.
• Rear arms are 3mm offset to the rear, allowing the shorter TRF420 lower deck (while keeping the same wheelbase) and giving increased rear traction.
• For use with 3mm diameter shafts (sold in Item 51637).
• Compatible with TRF420, TRF419*, TA07* and TB-05 PRO* chassis cars.
• Note: *Rear arms have different offset to kit standard parts, and require adjustment of wheelbase using spacers, etc.

Warning! Not suitable for children under 14 years.

Article number: 300051638
Product: TRF420 C Parts Front Uprights

These are the spare steering uprights for the TRF420 race car chassis. They feature the new 2-part front upright designs which utilize separate arm and bearing housing components. You can also use these new uprights on existing Tamiya touring car racing platforms.

• TRF420 C Parts x1
• Components are molded in carbon fiber-reinforced plastic for superior rigidity.
• Compatible with TRF420, TRF419, TA07 and TB-05 PRO chassis cars.

Warning! Not suitable for children under 14 years.

Article number: 300051637
Product: TRF420 3x25/22 SusShaft *2each

These are spare suspension shafts that are used in the TRF420, Tamiya’s state-of-the-art 4WD touring car race chassis. They are for use with the new TRF420 design suspension arms.

• 3x25mm Suspension Shafts x2
• 3x22mm Suspension Shafts x2
• Stainless steel material.
• At 3mm in diameter, they are thicker than 2.6mm parts on previous chassis for a sturdier suspension setup.
• Previous shafts had a cutaway flat section to fasten the grub screw on; these have a continuous groove to make it easier to fasten.
• Compatible with cars using Item 51639 TRF420 D Parts (Suspension Arms).

Warning! Not suitable for children under 14 years.

Article number: 300051636
Product: TRF420 3x43mm Sus Shafts *4

These are spare suspension shafts that are used in the TRF420, Tamiya’s state-of-the-art 4WD touring car race chassis.

• 3x43mm Suspension Shafts x4
• Stainless steel material.
• Compatible with TRF420, TB Evo.6*, FF-03 EVO* and TG10-Mk.2FN* chassis cars.
• Note: *These chassis can only use the shafts on the front (2pcs.).

Warning! Not suitable for children under 14 years.

Article number: 300051634
Product: CC-02 J Parts Body Mounts *2

These are spare parts for the CC-02 chassis platform. This specific sprue includes body mounts and suspension arm components.

• CC-02 J Parts x2
• Contains parts to complete both front and rear of the chassis.
• Compatible with CC-02 chassis models.

Warning! Not suitable for children under 14 years.

Article number: 300051622 Product: GR SUPRA Body

Tamiya is delighted to announce that the body parts for the cutting-edge TOYOTA GR Supra are to be sold as an individual item.

Set Contents/Information

• The powerful, alluring body is molded accurately in lightweight
   and durable polycarbonate, with separate light cases front and rear.
• Features separate molded parts for side mirrors.
• Marking stickers, plus masking stickers for use when painting
   are included.
• Compatible with 257mm wheelbase touring car chassis.

Warning! Not suitable for children under 14 years.

Article number: 300047426 Product: Top-Force CarbonChass Conv.Set

This is a welcome re-issue for the classic Item 53100, with a few minor updates to ensure that it is suitable for modern day drivers of the Top-Force (2017).

Set Contents/Information

• Carbon Fiber Upper Deck x1, Carbon Fiber Lower Deck x1
• Carbon Fiber Front Damper Stay x1,
   Carbon Fiber Rear Damper Stay x1
• Turnbuckles and small parts for attachment are also included.
• Carbon fiber double-deck components have the same design as
   kit-standard FRP components, providing a lighter-weight and more
   rigid base for the model.
• The upper deck is adorned with the Tamiya twin star logo and
   name, plus lettering, all printed in white and offsetting the stylish
   carbon fiber pattern nicely.
• Carbon fiber damper stays have an updated design compatible
   with standard and Hop-Up Option dampers.
• Compatible with Item 47350 Top-Force (2017).

Warning! Not suitable for children under 14 years.

Article number: 300042350
Product: TRF420 Aluminum Lower Deck

The TRF420 chassis is a thoroughbred racing chassis, and now you have even more setup options with this aluminum lower deck, which is perfect on high-grip circuits.

• TRF420 Aluminum Lower Deck x1
• Crafted in 2mm thick aluminum, this deck maintains excellent rigidity, with optimal flex provided by the large diagonal slits in the center.
• Black anodized finish.
• Recommended for use with the carbon fiber upper deck in Item 42349.
• Compatible with TRF420 chassis cars.

Warning! Not suitable for children under 14 years.

Article number: 300042349
Product: TRF420 Carbon UpperDeck 1.75mm

The TRF420 chassis is a thoroughbred racing chassis meant for Tamiya’s most demanding radio control racing enthusiasts, and now you have even more setup options with this thinner carbon fiber upper deck, which promises to be great on high-grip circuits.

• TRF420 Carbon Upper Deck (1.75mm) x1
• At 1.75mm thickness, this component is 0.25mm thinner than the kit-standard deck, for more flex against roll stresses.
• Recommended for use with the aluminum lower deck in Item 42350.
• Compatible with TRF420 chassis cars.

Warning! Not suitable for children under 14 years.

Article number: 300042348
Product: TRF420 Carbon Lower Deck

This is a spare bottom chassis deck for the TRF420 race car machine.

• TRF420 Carbon Lower Deck x1
• 2.25mm thickness carbon fiber lower deck was designed for the TRF420, to give an optimum balance of flexibility and rigidity.
• Compatible with TRF420 chassis cars.

Warning! Not suitable for children under 14 years.

Article number: 300042347
Product: TRF420 Carbon Upper Deck

This is a spare upper top deck for the TRF420 chassis.

• TRF420 Carbon Upper Deck x1
• 2mm thickness carbon fiber upper deck was designed for the TRF420, to give an optimum balance of flexibility and rigidity.
• Compatible with TRF420 chassis cars.

Warning! Not suitable for children under 14 years.

Article number: 300042346
Product: TRF420 Wheel Axles *2

These are the lightweight axles found on the TRF420 racing chassis touring car kit. They can be used as spare parts on the TRF420 or as Hop-Up Option parts on any of Tamiya’s TA or TB touring car machines.

• TRF420 Wheel Axles x2
• Each axle weighs approximately 1.5g less than counterparts in Item 51445 TRF417 Wheel Axles (2pcs.), for less pressure and wear on tires.
• Compatible with TRF420, TRF419, TA07 and TB-05 PRO chassis cars.

Warning! Not suitable for children under 14 years.

Article number: 300042340 Product: R/C Car Bag

This nylon bag will be a most useful item to have on hand in a pinch, particularly in situations where your car has gotten a bit dirty and you don’t want to get your carrying case or pit bag in a mess.

Item Contents/Information

• R/C Car Bag x1
• Made from nylon.
• Provides protection for the body when you are on the move,
   and in the event that parts get detached or fall off, they will
   at least be in the bag when you open it up.

Article number: 300042339 Product: R/C Tool Bag

Keep your tools together and easily accessible with this handy soft polyester bag.

Item Contents/Information

• R/C Tool Bag x1
• Made from black polyester, which will cushion your tools and
   doesn’t have the risk of cracking that hard cases do.
• Features the Tamiya and TRF (Tamiya Racing Factory) logos
   printed on the top of the bag.
• The perfect size for carrying TRF tools, long-nose pliers and so on.
• With an internal divider, and touch fastener tape strap to keep your
   tools in place.
• Approximate external dimensions: 310mm x 200mm x 60mm.

Article number: 300042338 Product: TC Carrying Case (Hard)

If you are just taking your touring car model out and don’t want to bring your entire tool kit with you, this carrying case is an ideal option.

Item Contents/Information

• Touring Car Carrying Case (Hard) x1
• Made from black plastic card for resistance to water,
   and even internal oil spills.
• Features a convenient plastic handle.
• Tamiya and TRF (Tamiya Racing Factory) logos are on the case top.

Article number: 500992019
Product: TAMYIA RC Catalogue 2019 GER/EN

244 pages, divided into a news and a general section, with everything that will make your RC model building heart beat faster.
The premium RC models from TAMIYA, the Japanese market leader for remote-controlled electric vehicles, have built up a good reputation for themselves over the years and are justifiably promoted with the slogan "First in quality around the world".
TAMIYA has been producing plastic models since the late 50s, and in 2007 celebrated its 30th production anniversary of RC vehicles.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Paint Stand Ornament (ST-98) - Ersatz für: 300069035 -

Warning! Not suitable for children under 14 years.

Side Hanger for Tamiya Stand * Ersatz für 300069032 *

Warning! Not suitable for children under 14 years.

=============== Attention ! Selling only in units of 6 pcs ===============

Warning! Not suitable for children under 14 years.

* Replacement for 300069033 *

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.