Tamiya Accessories

Chassis for 58087

Chassis for 58074

Warning! Not suitable for children under 14 years.

Body for 58063

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

X Parts (1 pc.) for 56019

Warning! Not suitable for children under 14 years.

Y Parts for 56313

Warning! Not suitable for children under 14 years.

X Parts for 56313

Warning! Not suitable for children under 14 years.

W Parts for 56313

Warning! Not suitable for children under 14 years.

Y Parts (1 pc.) for 56016

Warning! Not suitable for children under 14 years.

Y Parts (1 pc.) for 56013

Warning! Not suitable for children under 14 years.

T Parts for 56312

Warning! Not suitable for children under 14 years.

T Parts for 56309

Warning! Not suitable for children under 14 years.

T Parts for 56305

Warning! Not suitable for children under 14 years.

Y Parts (1 pc.) for 58106

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300174559
Product: SW Air Compressor Advance

This is a very lightweight and compact air compressor designed to work with Tamiya’s Spray Work range of airbrushes. It includes an AC adapter with parts to allow use of power in countries across the globe! While compact, this compressor’s 0.08MPa continuous pressure rating ensures plenty of power for great paint jobs on a range of plastic models, from blanket painting of larger areas, to the picking out of more detailed sections like camouflage on military models.

• Compatible with Tamiya airbrushes.
• Compact unit features a dial to allow easy adjustment of air pressure.
• Comes with an airbrush hanger with a sensor switch that turns on the compressor when the airbrush is removed, and off when the airbrush is replaced again.
• Transparent coiled hose is included. Being see-through, it allows quick visual identification of any moisture build up, helping you to shut down the compressor before that water causes any ‘blushing’ (cloudy finishes).
• Low noise and vibration levels cause minimum disruption to the surrounding environment.
• Selected ratings: approx. 0.21MPa (30PSI) max pressure; approx. 0.08MPa (12PSI) continuous pressure, 45db noise level.
• Dimensions: 12.5cm x 10cm x 11.5cm. Weight: approx. 600g.

Article number: 300174545
Product: SW HG Airbrush III Super Fine 0,2/7ccm

The Spray-Work HG Airbrush III (Super Fine ) features a 0.2mm fine nozzle and is equipped with a removable paint cup (7cc) and is also compatible with separately sold plastic paint cups with larger capacities (Item 74511: 17cc / Item 74524: 40cc). The 0.2mm fine nozzle was only previously available with item 74514 Spray-Work HG Super Fine Airbrush which has an integrated (3cc) paint cup.

Article number: 300174056
Product: TAMIYA Cutting Mat DIN-A4 grey

Convenient and versatile cutting mat features printed graph, circle, angle and right angle lines for easy reference. Unmarked reverse side can also be used. High quality material doesn't leave marks when cut and will not dull blades.

Cutting Mat (A4)

Warning! Not suitable for children under 14 years.

Article number: 300174047
Product: HG Angled Tweezers

These precision made stainless steel tweezers are ideal for handling small, delicate plastic model parts. An angled type which can access hard to reach areas and a straight type which directly transmits finger movements to the tip for optimum control are available.

Article number: 300174016
Product: Tamiya Basic Tool

This set contains the basic, indispensable tools for model and craft work: A pair of side cutters for plastic, angled tweezers, small (+) and (-) screwdrivers, a craft knife and a file, all neatly packed in a handy plastic case.

Article number: 300174003
Product: Angled Tweezers

These angled tweezers are useful for handling small parts and adding decals to your models. The edges are rounded to prevent scratching. Made from stainless steel with a black cationic finish for long life.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300156514
Product: 1/14 Body-Set Scania R620 6x4 Highline

Scania R620 Body Parts Set. Owners of Item 56325 MAN TGX 26.540 6x4 XLX will also be able to mount this Scania R620 body onto their truck chassis.

Warning! Not suitable for children under 14 years.

Article number: 300154612
Product: TAMIYA TBLM-02S 15,5 T Motor

This is a Next Generation Tamiya Brushless motor. The motor design incorporates sensor technology, which allows the motor to communicate efficiently with the electronic speed controller (ESC) in your model, allowing efficient performance. Key benefits

Troubleshooting help
•Provides smooth operation at both low and high speeds.
•Brushless design makes for long motor life and reduced maintenance cycles.
•Ideally suited to use with Item 45066 Tamiya Brushless ESC 03 (Sensored). Also compatible with Item 45047 (TBLE-01S) and Item 45057* (TBLE-02S).
•When using Item 54611 (10.5T) with Item 45057 (TBLE-02S), it is highly recommended to install Item 45063 TFU-01 ESC Cooling Fan Unit to ESC, as ESC's overheat protection function may be activated due to excessive load.
•Motor timing is adjustable.

Warning! Not suitable for children under 14 years.

Article number: 300154611
Product: TAMIYA TBLM-02S 10,5 T Motor

This is a Next Generation Tamiya Brushless motor. The motor design incorporates sensor technology, which allows the motor to communicate efficiently with the electronic speed controller (ESC) in your model, allowing efficient performance.

Troubleshooting help

Key benefits
•Provides smooth operation at both low and high speeds.
•Brushless design makes for long motor life and reduced maintenance cycles.
•Ideally suited to use with Item 45066 Tamiya Brushless ESC 03 (Sensored). Also compatible with Item 45047 (TBLE-01S) and Item 45057* (TBLE-02S).
•When using Item 54611 (10.5T) with Item 45057 (TBLE-02S), it is highly recommended to install Item 45063 TFU-01 ESC Cooling Fan Unit to ESC, as ESC's overheat protection function may be activated due to excessive load.
•Motor timing is adjustable. 54612 Tamiya Brushless Motor 02 (Sensored) 15.5T

Warning! Not suitable for children under 14 years.

Article number: 300145061
Product: Servo TSU-04 Analog (Drip proof)

This water resistant servo has resistance to small amounts of water, protecting it from damage if the model moves through some standing water or suddenly encounters wet conditions. The servo features a black heat-sink for increased durability.


Water resistant Analog Servo x1
Servo Horn x1
Includes 2.6x8mm tapping screw.

Operating angle: 45 degrees
Output Torque: 4.0Kg cm (using 6V battery)
Operating speed: 0.17sec/60 degrees (using 6V battery)
Power supply: 4.8-6.0V

Servo Dimensions: 40.0x20.0x37.0mm
Weight: 41g

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Q Parts for 56318

Warning! Not suitable for children under 14 years.

M Parts for 58370

Warning! Not suitable for children under 14 years.

Q Parts (1 pc.) for 56019

Warning! Not suitable for children under 14 years.

R Parts (1 pc.) for 56313

Warning! Not suitable for children under 14 years.

L Parts for 56313

Warning! Not suitable for children under 14 years.

S Parts for 56312

Warning! Not suitable for children under 14 years.

R Parts for 56312

Warning! Not suitable for children under 14 years.

K Parts for 56312

Warning! Not suitable for children under 14 years.

N Parts for 56312

Warning! Not suitable for children under 14 years.

Q Parts for 56309

Warning! Not suitable for children under 14 years.

P Parts for 56309

Warning! Not suitable for children under 14 years.

K Parts for 56309

Warning! Not suitable for children under 14 years.

Q Parts for 56305

Warning! Not suitable for children under 14 years.

P Parts for 56305

Warning! Not suitable for children under 14 years.

K Parts for 56305

Warning! Not suitable for children under 14 years.

P Parts for 56304

S Parts for 56302

Warning! Not suitable for children under 14 years.

R Parts (1) for 56301

Warning! Not suitable for children under 14 years.

Q Parts for 56301

Warning! Not suitable for children under 14 years.

P Parts for 56301

Warning! Not suitable for children under 14 years.

N Parts for 56301

Warning! Not suitable for children under 14 years.

S Parts (1) for 56301

Warning! Not suitable for children under 14 years.

L Parts for 56301

Warning! Not suitable for children under 14 years.

K Parts for 56301

Warning! Not suitable for children under 14 years.

P Parts for 58071

Warning! Not suitable for children under 14 years.

K Parts for 58064

Warning! Not suitable for children under 14 years.

N Parts for 43529

Warning! Not suitable for children under 14 years.

Article number: 300095556
Product: 2mm Alu. Lock Nut Ora*5

Lock nuts can be used to fix your rollers and mass dampers securely in place, with the resin inserts ensuring a tight fit to the relevant parts. Your machine will run hard and reliably without parts coming loose, and look vibrant with an orange accent!

• 2mm Aluminum Lock Nuts (Orange) x5
• Orange anodized finish.

Warning! Not suitable for children under 14 years.

Article number: 300089984
Product: Engraving Blade Holder Red

This is a color variation of the Engraving Blade Holder (original: Item 74139), with the handle in a vivid red. It can be used with the wide range of Tamiya Fine Engraving Blades and Needle.

Item Contents/Information
• Engraving Blade Holder (Red) x1
• Length: 126mm, diameter: 6mm.
• Made from lightweight, durable aluminum, with a knurled grip section for error-free crafting. The chuck is made of nickel-plated brass.
• The holder’s slimline form allows it to be held like a pen. It is marked with the twin star logo and the words TAMIYA CRAFT TOOLS.
• Blade insertion and removal is simple – just lightly pinch the chuck and rotate the handle.
• Comes with a protective cap that also stops the holder from rolling away.
• Compatible with Fine Engraving Blades (Items 74135-38, 74145), Needle (Item 74148) and Design Knife Blades (Item 74074).

Article number: 300089929
Product: Weather Master Applicator/Pinsel Set (3)

To create the perfect finish to your models, it is required that all your tools be in top working condition. This set contains three replacements applicator brushes for Weathering Master Sets to allow you to replace your worn-out applicators and give your model that precise finish.

Warning! Not suitable for children under 14 years.

Article number: 300087205
Product: Mark Fit (Super Strong)

This Super-Strong Mark Fit is ready to enable perfect application of your decals by softening them so they fit easily to uneven, rounded and matte finished surfaces. It joins standard (Item 87102) and Strong (Item 87135) Mark Fit products on the market, and is for use on thick decals or extremely difficult target surfaces.

Set Contents/Information
• The bottle comes with a brush applicator on the underside of the cap.
• Bottle contents: 40ml.
• This is a more powerful formula than other Mark Fit products and may damage some kinds of decal or affect painted surfaces. Recommended for advanced users.

Article number: 300087204
Product: Bottled Metal Primer

Tamiya's Metal Primer was only available in a spray can (Item 87061) thus far, but which is now joined by a bottled version of the same product handy for brush and airbrush painting components.

Item Contents/Information
• Clear primer is for treating metallic parts before painting. It does not damage plastic, and applied as an undercoat it will prevent paint from peeling off of metal parts.
• Comes in a 40ml glass bottle.

Article number: 300087203
Product: Masking Tape w/Sheet 150mm

Item Contents/Information
• Masking Tape w/Plastic Sheeting 150mm Roll x1
• Polyethylene sheeting is resistant to paint, minimizing the risk of any seeping through.
• The width of tape and sheeting combined is 150mm.
Length: 10 meters.
• Sheeting is a double layer, and can be cut apart if a wider piece is required.
• See below for some examples of use.

Article number: 300087202
Product: 40ml Square Bottle Holder

Cement or other modeling aids accidentally spilling across your workbench could spell danger for your model and other materials – reduce the risk of accidents with this simple sponge holder, which is designed to fit snugly around the 40ml square bottles used for Tamiya Cement and other products, limiting the chance of their falling over if knocked.

Item Contents/Information
• Bottle Holder x1
• Use the included tab to link multiple holders together.
• Material: PE sponge
• Dimensions: 80mm x 80mm x 12mm

Warning! Not suitable for children under 14 years.

Article number: 300087200 Product: Fine Lapping Film #8000 *3

Tamiya lapping film is a great resource for model builders of all types. It allows you to provide a smooth and even finish to your paint job. Each film piece is uniformly covered with fine abrasive particles and can be used to rub away rough surfaces or joints.

• #8000 Fine Lapping Film x3 (Pink)
• Extremely fine finish is great as a pre-treatment when using Tamiya Compound products (Items 87068, 87069 and 87070) for glossy surface finishes.
• Dimensions: 93mm x 228mm • May be used for wet sanding.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300087194
Product: Lacquer Thinner Retarder 250ml

This new product not only thins lacquer paints for airbrushing, it also includes retardant to slow the drying of the thinned paint, particularly useful in covering up any overspray and getting a glossy finish.


• Can be used to thin Tamiya Color Lacquer Paints and Spray Paints, in a ratio of between 1:1 and 2:1 (thinner:paint).
• Retarder slows drying, particularly useful in cases such as that shown overleaf, when undesired overspray can ruin a glossy paint job if it dries before you can get to it.
• Helps to avoid blushing (when moisture gets trapped with paint and you end up with a foggy white finish) in humid conditions.
• Contents: 250ml.

Warning! Not suitable for children under 14 years.

Article number: 300087192 Product: Polishing Compound Sponges

Finish your model with precision using these sponges. They may be used with your favorite polishing compound. They allow for clean, precise application of the compound, giving your model a gorgeous finish to its paint job.

Contents

•Small, Medium & Large Sponges x1 each
•Sponges feature integrated grip sections, making them a breeze to handle.
•Compared to cloth, the sponges allow much more precise application of polishing compound, helping you avoid problems such as rubbing away paint from corners or edges, and accidental mixing of colors on or around borders.
•3 different sizes included. •After use, the sponges can be washed and re-used.

Warning! Not suitable for children under 14 years.

Article number: 300087191 Product: Fine Lapping Film #2000 *3

Tamiya lapping film is a great resource for model builders of all types. It allows you to provide a smooth and even finish to your paint job. Each film piece is uniformly covered with fine abrasive particles and can be used to rub away rough surfaces or joints.

Item Contents
•#2000 Fine Lapping Film x3 (White)
•Dimensions: 93mm x 228mm
•May be used for wet sanding

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 87187 Product: Tamiya CA Cement Easy Sanding

TAMIYA quality adhesives for all model-making requirements, from craft and plastic glues to instant adhesives.

Warning! Not suitable for children under 14 years.

Article number: 300087186
Product: Schleifpapier (3) P6000 Körnung

Tamiya lapping film is a great resource for model builders of all types. It allows you to provide a smooth and even finish to your paint job. Each film piece is uniformly covered with fine abrasive particles and can be used to rub away rough surfaces or joints.


• #6000 Fine Lapping Film x3 (light blue)
• Dimensions: 93mm x 228mm
• Particle size: 2 microns

.

Warning! Not suitable for children under 14 years.

Article number: 300087185
Product: Fine Lapping Film #4000 *3

Tamiya lapping film is a great resource for model builders of all types. It allows you to provide a smooth and even finish to your paint job. Each film piece is uniformly covered with fine abrasive particles and can be used to rub away rough surfaces or joints.


• #4000 Fine Lapping Film x3 (light green)
• Dimensions: 93mm x 228mm
• Particle size: 3 microns

.

Warning! Not suitable for children under 14 years.

Article number: 300087184 Product: Masking Tape for Curves 12mm

Masking is a job which modelers of all kinds in every scale must carry out, and it requires precision in order to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. At 12mm it becomes the widest in the Tamiya range, and is great for covering larger areas in one large sweep. This tape is also available in 3 other widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively.
 

•Length of each roll: 20m
•A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300087179
Product: Masking Tape for Curves 5mm

Masking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision in order to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively.

Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves.

Warning! Not suitable for children under 14 years.

Article number: 300087178
Product: Masking Tape for Curves 3mm

Masking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision in order to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively.

Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves.

Warning! Not suitable for children under 14 years.

Article number: 300087177
Product: Masking Tape for Curves 2mm

Masking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision in order to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively.

Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300087171
Product: TAMIYA Sanding Sponge Sheet 3000

Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited for removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces and hard-to-reach corners. This item can be easily cut into the desired shape/size using a modeling knife. Note: Suitable for wet sanding use.

• Tamiya Sanding Sponge Sheet x1
• Dimensions: 114 x 140mm
• Abrasive material: Aluminum oxide
• Sponge thickness: 5mm

9 different levels of abrasion available (Each sold separately):
180, 240, 320, 400, 600, 1000, 1500, 2000, 3000

Warning! Not suitable for children under 14 years.

Article number: 300087170
Product: TAMIYA Sanding Sponge Sheet 2000

Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited for removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces and hard-to-reach corners. This item can be easily cut into the desired shape/size using a modeling knife. Note: Suitable for wet sanding use.

• Tamiya Sanding Sponge Sheet x1
• Dimensions: 114 x 140mm
• Abrasive material: Aluminum oxide
• Sponge thickness: 5mm

9 different levels of abrasion available (Each sold separately):
180, 240, 320, 400, 600, 1000, 1500, 2000, 3000

Warning! Not suitable for children under 14 years.

Article number: 300087169
Product: Diorama Sheet A4 Brick A (gray)

Part of the joy of scale modelling is the creation of a diorama, realistic scenes which display your finished model in context and take it to the next level. This sheet features realistic patterns with a raised texture printed onto a craft paper background, and they allow simple yet highly effective recreation of surfaces and textures which would be seen in many typical diorama such as stone street paving and brick walls.
Craft paper-based material can be cut easily to the desired size and attached to a diorama base or surface using double-sided tape, Tamiya Craft Bond, wood glue, etc.
It can be painted with enamel and acrylic paints.


A4 size (297mmx210mm)

Warning! Not suitable for children under 14 years.

Article number: 300087168 Product: Diorama Sheet A4 Brick (red)

Part of the joy of scale modelling is the creation of a diorama, realistic scenes which display your finished model in context and take it to the next level. This sheet features realistic patterns with a raised texture printed onto a craft paper background, and they allow simple yet highly effective recreation of surfaces and textures which would be seen in many typical diorama such as stone street paving and brick walls.

• Craft paper-based material can be cut easily to the desired size and attached to a diorama base or surface using double-sided tape, Tamiya Craft Bond, wood glue, etc.
• It can be painted with enamel and acrylic paints.
• A4 size (297mmx210mm)

Warning! Not suitable for children under 14 years.

Article number: 300087167 Product: Diorama Sheet A4 Stone Paving C/large

Part of the joy of scale modelling is the creation of a diorama, realistic scenes which display your finished model in context and take it to the next level. This sheet features realistic patterns with a raised texture printed onto a craft paper background, and they allow simple yet highly effective recreation of surfaces and textures which would be seen in many typical diorama such as stone street paving and brick walls.

• Craft paper-based material can be cut easily to the desired size and attached to a diorama base or surface using double-sided tape, Tamiya Craft Bond, wood glue, etc.
• It can be painted with enamel and acrylic paints.
• A4 size (297mmx210mm)
 

Warning! Not suitable for children under 14 years.

Article number 300087166 Product: Diorama Sheet A4 Stone Paving B/medium

Part of the joy of scale modelling is the creation of a diorama, realistic scenes which display your finished model in context and take it to the next level. This sheet features realistic patterns with a raised texture printed onto a craft paper background, and they allow simple yet highly effective recreation of surfaces and textures which would be seen in many typical diorama such as stone street paving and brick walls.

•Craft paper-based material can be cut easily to the desired size and attached to a diorama base or surface using double-sided tape, Tamiya Craft Bond, wood glue, etc.
•It can be painted with enamel and acrylic paints.
•A4 size (297mmx210mm)
 

Warning! Not suitable for children under 14 years.

Article number: 300087165
Product: Diorama Sheet A4 Stone Paving A/small

Part of the joy of scale modelling is the creation of a diorama, realistic scenes which display your finished model in context and take it to the next level. This sheet features realistic patterns with a raised texture printed onto a craft paper background, and they allow simple yet highly effective recreation of surfaces and textures which would be seen in many typical diorama such as stone street paving and brick walls.
Craft paper-based material can be cut easily to the desired size and attached to a diorama base or surface using double-sided tape, Tamiya Craft Bond, wood glue, etc.
It can be painted with enamel and acrylic paints.

A4 size (297mmx210mm)

Warning! Not suitable for children under 14 years.