Accessories

Article number: 300089929 Product: Weather Master Applicator/Pinsel Set (3)

To create the perfect finish to your models, it is required that all your tools be in top working condition. This set contains three replacements applicator brushes for Weathering Master Sets to allow you to replace your worn-out applicators and give your model that precise finish.

Article number: 300087194 Product: Lacquer Thinner Retarder 250ml

This new product not only thins lacquer paints for airbrushing, it also includes retardant to slow the drying of the thinned paint, particularly useful in covering up any overspray and getting a glossy finish.

• Can be used to thin Tamiya Color Lacquer Paints and Spray Paints, in a ratio of between 1:1 and 2:1 (thinner:paint). • Retarder slows drying, particularly useful in cases such as that shown overleaf, when undesired overspray can ruin a glossy paint job if it dries before you can get to it. • Helps to avoid blushing (when moisture gets trapped with paint and you end up with a foggy white finish) in humid conditions. • Contents: 250ml.

Warning! Not suitable for children under 14 years.

Article number: 300087192 Product: Polishing Compound Sponges

Finish your model with precision using these sponges. They may be used with your favorite polishing compound. They allow for clean, precise application of the compound, giving your model a gorgeous finish to its paint job.

Contents •Small, Medium & Large Sponges x1 each •Sponges feature integrated grip sections, making them a breeze to handle. •Compared to cloth, the sponges allow much more precise application of polishing compound, helping you avoid problems such as rubbing away paint from corners or edges, and accidental mixing of colors on or around borders. •3 different sizes included. •After use, the sponges can be washed and re-used.

Article number: 300087191 Product: Fine Lapping Film #2000 *3

Tamiya lapping film is a great resource for model builders of all types. It allows you to provide a smooth and even finish to your paint job. Each film piece is uniformly covered with fine abrasive particles and can be used to rub away rough surfaces or joints.

Item Contents •#2000 Fine Lapping Film x3 (White) •Dimensions: 93mm x 228mm •May be used for wet sanding

Warning! Not suitable for children under 14 years.

Article number: 300087189 Product: Panel Accent Color Light Gray

TAMIYA Panel Accent Colors contour paints (washings) - These paints are ideal for realistically imitating weathering effects or highlighting the contours (of vehicles, aircraft wings and much else) on static models. These enamel-based paints are pre-mixed and thinned to the ideal viscosity ready for use. This allows even beginners to successfully enter the world of weathering-, washing- and chipping techniques.

• Sealing cap with built-in applicator (very fine) • Panel Accent Colors are pre-mixed ready for use • Black - Universal for all contours and surface lacquerings • Brown - Replicates rust (on military vehicles and tactile models, for example) and can also be used to highlight contours on vehicles with bright finishes, such as white or yellow • Gray - Ideal to replicate contours on brightly lacquered surfaces/models, such as white body shells or the light-gray fuselage of Japanese aircraft.

Contains: Bottle with 40ml, applicator in sealing cap.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300087184 Product: Masking Tape for Curves 12mm

Masking is a job which modelers of all kinds in every scale must carry out, and it requires precision in order to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. At 12mm it becomes the widest in the Tamiya range, and is great for covering larger areas in one large sweep. This tape is also available in 3 other widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively.

•Length of each roll: 20m •A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300087179 Product: Masking Tape for Curves 5mm

Masking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision in order to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively.

Length of roll: 20m A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas. Use of narrower tape is recommended for sharper curves.

Article number: 300087178 Product: Masking Tape for Curves 3mm

Masking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision in order to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively.

Length of roll: 20m A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas. Use of narrower tape is recommended for sharper curves.

Article number: 300087177 Product: Masking Tape for Curves 2mm

Masking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision in order to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively.

Length of roll: 20m A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas. Use of narrower tape is recommended for sharper curves.

Article number: 300087169 Product: Diorama Sheet A4 Brick A (gray)

Part of the joy of scale modelling is the creation of a diorama, realistic scenes which display your finished model in context and take it to the next level. This sheet features realistic patterns with a raised texture printed onto a craft paper background, and they allow simple yet highly effective recreation of surfaces and textures which would be seen in many typical diorama such as stone street paving and brick walls. Craft paper-based material can be cut easily to the desired size and attached to a diorama base or surface using double-sided tape, Tamiya Craft Bond, wood glue, etc. It can be painted with enamel and acrylic paints.

A4 size (297mmx210mm)

Article number: 300087168 Product: Diorama Sheet A4 Brick (red)

Part of the joy of scale modelling is the creation of a diorama, realistic scenes which display your finished model in context and take it to the next level. This sheet features realistic patterns with a raised texture printed onto a craft paper background, and they allow simple yet highly effective recreation of surfaces and textures which would be seen in many typical diorama such as stone street paving and brick walls.

• Craft paper-based material can be cut easily to the desired size and attached to a diorama base or surface using double-sided tape, Tamiya Craft Bond, wood glue, etc. • It can be painted with enamel and acrylic paints. • A4 size (297mmx210mm)

Article number: 300087167 Product: Diorama Bogen A4 Gehwegplatte

Part of the joy of scale modelling is the creation of a diorama, realistic scenes which display your finished model in context and take it to the next level. This sheet features realistic patterns with a raised texture printed onto a craft paper background, and they allow simple yet highly effective recreation of surfaces and textures which would be seen in many typical diorama such as stone street paving and brick walls.

• Craft paper-based material can be cut easily to the desired size and attached to a diorama base or surface using double-sided tape, Tamiya Craft Bond, wood glue, etc. • It can be painted with enamel and acrylic paints. • A4 size (297mmx210mm)

Article number 300087166 Product: Diorama Sheet A4 Stone Paving B/medium

Part of the joy of scale modelling is the creation of a diorama, realistic scenes which display your finished model in context and take it to the next level. This sheet features realistic patterns with a raised texture printed onto a craft paper background, and they allow simple yet highly effective recreation of surfaces and textures which would be seen in many typical diorama such as stone street paving and brick walls.

•Craft paper-based material can be cut easily to the desired size and attached to a diorama base or surface using double-sided tape, Tamiya Craft Bond, wood glue, etc. •It can be painted with enamel and acrylic paints. •A4 size (297mmx210mm)

Article number: 300087165 Product: Diorama Sheet A4 Stone Paving A/small

Part of the joy of scale modelling is the creation of a diorama, realistic scenes which display your finished model in context and take it to the next level. This sheet features realistic patterns with a raised texture printed onto a craft paper background, and they allow simple yet highly effective recreation of surfaces and textures which would be seen in many typical diorama such as stone street paving and brick walls. Craft paper-based material can be cut easily to the desired size and attached to a diorama base or surface using double-sided tape, Tamiya Craft Bond, wood glue, etc. It can be painted with enamel and acrylic paints.

A4 size (297mmx210mm)

Article number: 300087164 Product: TAMIYA Masking Tape w/Plastic She. 550mm

Tamiya introduces its highly popular masking tape in a new and handy way to mask off larger areas in the painting process, for example R/C car bodies. The masking tape comes pre-attached to plastic sheeting, and when folded out it has a width of 550mm.

•Tamiya masking tape attaches securely to the surface to be covered, protecting it from unwanted paint and giving sharply defined edges. It peels off easily once the object has been painted. •Length: 10m.

Article number: 300087163 Product: Tamiya Sanding Sponge Sheet 320

Tamiya is pleased to announce the extension of its range of sanding materials. Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited to removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge’s flexibility allows even finishing of curved surfaces and hard-to-reach corners. This item can be easily cut into the desired shape/size using a modeling knife. Also suitable for wet sanding use. Choose from 3 different levels of abrasion.

About the Items • Contents: Tamiya Sanding Sponge Sheet x1 • Dimensions: 114 x 140mm • Abrasive material: Aluminum oxide • Sponge thickness: 5mm

Article number: 300087162 Product: Tamiya Sanding Sponge Sheet 240

Tamiya is pleased to announce the extension of its range of sanding materials. Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited to removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge’s flexibility allows even finishing of curved surfaces and hard-to-reach corners. This item can be easily cut into the desired shape/size using a modeling knife. Also suitable for wet sanding use. Choose from 3 different levels of abrasion.

About the Items • Contents: Tamiya Sanding Sponge Sheet x1 • Dimensions: 114 x 140mm • Abrasive material: Aluminum oxide • Sponge thickness: 5mm

Article number: 300087161 Product: Tamiya Sanding Sponge Sheet 180

Tamiya is pleased to announce the extension of its range of sanding materials. Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited to removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge’s flexibility allows even finishing of curved surfaces and hard-to-reach corners. This item can be easily cut into the desired shape/size using a modeling knife. Also suitable for wet sanding use. Choose from 3 different levels of abrasion.

About the Items • Contents: Tamiya Sanding Sponge Sheet x1 • Dimensions: 114 x 140mm • Abrasive material: Aluminum oxide • Sponge thickness: 5mm

Article number: 300087160 Product: Fine Surface Primer L Oxide Red

This Oxide Red primer is perfect for applying an undercoat to AFV models such as tanks. It can be used to provide a realistic undercoat to be displayed when using weathering techniques such as chipping, as well as providing your top coat colors with a richer tone.

Content: 180ml

Warning! Not suitable for children under 14 years.

Article number: 300087151 Product: Gloss Coating Varnish 10ml

This water-based coating varnish is intended for use on surfaces which have been painted with a gloss finish, enhancing the luster and also helping to prevent unsightly fingerprints being imprinted on the surface. Helps to mask small abrasions and scratches on the surface. It is particularly effective when used with darker colors, bringing out a rich depth. Can be applied simply using a cloth. The 10ml contents will be enough to apply a superb finish to a good number of models (roughly fifteen 1/24 scale models).

Article number: 300087146 Product: TAMIYA Fine Surface Primer L (Pink)180ml

Liquid Primer is highly useful for filling seam lines and smoothing over scratches in small or difficult to reach areas since it can be applied with a modeling brush. This is a pink-colored version of the liquid primer which is ideal as undercoat for spraying red color paints.

• Spray can contains 180ml.

Warning! Not suitable for children under 14 years.

Article number: 300087140 Product: Panel Accent Color D Brown

TAMIYA Panel Accent Colors contour paints (washings) - These paints are ideal for realistically imitating weathering effects or highlighting the contours (of vehicles, aircraft wings and much else) on static models. These enamel-based paints are pre-mixed and thinned to the ideal viscosity ready for use. This allows even beginners to successfully enter the world of weathering-, washing- and chipping techniques.

• Sealing cap with built-in applicator (very fine)
• Panel Accent Colors are pre-mixed ready for use
• Black - Universal for all contours and surface lacquerings
• Brown - Replicates rust (on military vehicles and tactile models, for example) and can also be used to highlight contours on vehicles with bright finishes, such as white or yellow
• Gray - Ideal to replicate contours on brightly lacquered surfaces/models, such as white body shells or the light-gray fuselage of Japanese aircraft.

Contains: Bottle with 40ml, applicator in sealing cap.
 

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300087135 Product: Mark Fit (Strong) 40ml

Mark Fit is a special solvent designed to soften your model decals which will allow you to apply them onto difficult to apply areas such as bumpy and curved surfaces. This "strong" version has a more powerful formula for softening decals compared to the standard version. The Strong version help decals adhere and conform to difficult curved surfaces or matte-painted surfaces. In addition, it could also help speed up the decal application process. The Bottle cap comes with brush applicator and contains 40ml of solvent.

Note: May cause damage to painted surface in some cases, particularly surfaces painted with acrylic paints.

How to Use

Apply Mark Fit solvent to area where decal is to be positioned. Place decal onto the area. Slide decal into correct position by a wet finger. Use a soft cloth or cotton swab to remove excess water and any air bubbles. Apply Mark Fit over the decal again, and then use a soft cloth or cotton swab to conform it to the model's surface. Do not touch until decal dries completely.

Article number: 300087133 Product: Panel Accent Color Gray

TAMIYA Panel Accent Colors contour paints (washings) - These paints are ideal for realistically imitating weathering effects or highlighting the contours (of vehicles, aircraft wings and much else) on static models. These enamel-based paints are pre-mixed and thinned to the ideal viscosity ready for use. This allows even beginners to successfully enter the world of weathering-, washing- and chipping techniques.

• Sealing cap with built-in applicator (very fine) • Panel Accent Colors are pre-mixed ready for use • Black - Universal for all contours and surface lacquerings • Brown - Replicates rust (on military vehicles and tactile models, for example) and can also be used to highlight contours on vehicles with bright finishes, such as white or yellow • Gray - Ideal to replicate contours on brightly lacquered surfaces/models, such as white body shells or the light-gray fuselage of Japanese aircraft.

Contains: Bottle with 40ml, applicator in sealing cap.

Warning! Not suitable for children under 14 years.

Article number: 300087132 Product: Panel Accent Color Brown

TAMIYA Panel Accent Colors contour paints (washings) - These paints are ideal for realistically imitating weathering effects or highlighting the contours (of vehicles, aircraft wings and much else) on static models. These enamel-based paints are pre-mixed and thinned to the ideal viscosity ready for use. This allows even beginners to successfully enter the world of weathering-, washing- and chipping techniques.

• Sealing cap with built-in applicator (very fine)
• Panel Accent Colors are pre-mixed ready for use
• Black - Universal for all contours and surface lacquerings
• Brown - Replicates rust (on military vehicles and tactile models, for example) and can also be used to highlight contours on vehicles with bright finishes, such as white or yellow
• Gray - Ideal to replicate contours on brightly lacquered surfaces/models, such as white body shells or the light-gray fuselage of Japanese aircraft.

Contains: Bottle with 40ml, applicator in sealing cap.
 

Warning! Not suitable for children under 14 years.

Article number: 300087131 Product: Panel Accent Color Black

TAMIYA Panel Accent Colors contour paints (washings) - These paints are ideal for realistically imitating weathering effects or highlighting the contours (of vehicles, aircraft wings and much else) on static models. These enamel-based paints are pre-mixed and thinned to the ideal viscosity ready for use. This allows even beginners to successfully enter the world of weathering-, washing- and chipping techniques.

• Sealing cap with built-in applicator (very fine)
• Panel Accent Colors are pre-mixed ready for use
• Black - Universal for all contours and surface lacquerings
• Brown - Replicates rust (on military vehicles and tactile models, for example) and can also be used to highlight contours on vehicles with bright finishes, such as white or yellow
• Gray - Ideal to replicate contours on brightly lacquered surfaces/models, such as white body shells or the light-gray fuselage of Japanese aircraft.

Contains: Bottle with 40ml, applicator in sealing cap.
 

Warning! Not suitable for children under 14 years.

Article number: 300087130 Product: Tamiya Masking Sticker (5) 240x180mm

This masking sticker product is ideal for various tasks such as masking off areas on R/C models, static models, and craft creations for painting.

Article number: 300087129 Product: Tamiya Masking Sticker (5)240x180mm Grid

This masking sticker product is ideal for various tasks such as masking off areas on R/C models, static models, and craft creations for painting.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300087125 Product: Tamiya 15 Well Palette (5)

Palettes are handy for mixing paints. Metal palettes are useful, but they require cleaning with thinner after each use. This PET plastic palette can be disposed of after each use, thus allowing the modeller to save both time and money. About the Item Each palette plate has 15 wells, including 9 round (Dia.: 25mm The palette plate is 3mm thick and each section can be easily cut away with scissors. The palette can be cleaned with any Tamiya paint thinner except Item 87089 Tamiya Airbrush Cleaner (250ml).

Related Items Tamiya Modeling Brush Basic Set (87066) Tamiya Modeling Brush HF Standard Set (87067) Paint Stirrer (2pcs.) (74017)

Article number: 300087118 Product: Polycarbonate Body Cleaner

When preparing a polycarbonate body for painting, washing it with detergent to remove any oils and grease from its surface and waiting for it to dry takes time. Polycarbonate Body Cleaner will save you time with this pre-painting cleaning solution. Polycarbonate cleaner can also be used to remove completely dried paint and cleaning scuff marks associated with normal roll overs from every day driving without damaging the body surface. It also includes an antistatic agent to prevent the build-up of static electricity in your R/C model. 1 bottle contains 40ml.

Article number: 300087114 Product: Tamiya Paint Retarder Acrylic

Tamiya Paint Retarder will make acrylic paint dry slower, enabling a smoother finish whether you airbrush Tamiya Acrylic paint or brush it onto a model. It can be used up to a 1:10 ratio with Tamiya Acrylic Paints. It helps to lessen the chance of painting a grainy surface on your model. Also, it is ideal for painting glossy finish surfaces. 1 bottle contains 40ml

Warning! Not suitable for children under 14 years.

Article number: 300087113 Product: Tamiya Limonene Cement

TAMIYA Quality adhesives for all model-making requirements, from craft and plastic glues to instant adhesives.

Content: 40 ml

Article number: 300087112 Product: Tamiya Craft Spatula Width 20mm

This Craft Spatula features a new shape which allows for easy mixing and application of paints. This spatula is made from POM (a polyacetal resin) which makes it highly resistant to water and chemical damage and can also be used with the application of Epoxy Cement and putty.

Article number: 300087105 Product: Tamiya Cotton Swab Tria.extra small(50)

When building a scale model, cotton swabs are often used with painting and applying decals. However, cotton swabs bought from supermarkets usually have loosely spun tips and quickly lose shape. These new Craft Cotton Swabs have tightly spun cotton tips and are easy to use, making them much better suited for hobby use. In the Craft Cotton Swab range there are five kinds: two with round and with three triangular shaped tips. These are industrial strength cotton swabs, and compared with those found in supermarkets, they do not fray as easily when wet or dipped in solvents, resulting in less wastage. These swabs are great for applying decals and panel lining onto model surfaces. Creating fine details and weathering on small areas such as in Waterline series models becomes a breeze. You can also use the swabs effectively for applying any of the Weathering Master Set color schemes, such as realistic rust stains, to your model.

Article number: 300087104 Product: Tamiya Cotton Swab round small(50)

When building a scale model, cotton swabs are often used with painting and applying decals. However, cotton swabs bought from supermarkets usually have loosely spun tips and quickly lose shape. These new Craft Cotton Swabs have tightly spun cotton tips and are easy to use, making them much better suited for hobby use.

In the Craft Cotton Swab range there are five kinds: two with round and with three triangular shaped tips. These are industrial strength cotton swabs, and compared with those found in supermarkets, they do not fray as easily when wet or dipped in solvents, resulting in less wastage. These swabs are great for applying decals and panel lining onto model surfaces. Creating fine details and weathering on small areas such as in Waterline series models becomes a breeze. You can also use the swabs effectively for applying any of the Weathering Master Set color schemes, such as realistic rust stains, to your model.

Article number: 300087103 Product: Tamiya Cotton Swab round extra small(50)

When building a scale model, cotton swabs are often used with painting and applying decals. However, cotton swabs bought from supermarkets usually have loosely spun tips and quickly lose shape. These new Craft Cotton Swabs have tightly spun cotton tips and are easy to use, making them much better suited for hobby use.

In the Craft Cotton Swab range there are five kinds: two with round and with three triangular shaped tips. These are industrial strength cotton swabs, and compared with those found in supermarkets, they do not fray as easily when wet or dipped in solvents, resulting in less wastage. These swabs are great for applying decals and panel lining onto model surfaces. Creating fine details and weathering on small areas such as in Waterline series models becomes a breeze. You can also use the swabs effectively for applying any of the Weathering Master Set color schemes, such as realistic rust stains, to your model.

Article number: 300087102 Product: Mark Fit 40ml

Mark Fit is a special solvent designed to soften your model decals which will allow you to apply them onto difficult to apply areas such as bumpy and curved surfaces, providing an improved finish to your scale model. The 40ml bottle contains a convenient brush for easy application.

How to Use Apply Mark Fit solvent to area where decal is to be positioned. Place decal onto the area. Slide decal into correct position by a wet finger. Use a soft cloth or cotton swab to remove excess water and any air bubbles. Apply Mark Fit over the decal again, and then use a soft cloth or cotton swab to conform it to the model's surface. Do not touch until decal dries completely.

Mark Fit

Warning! Not suitable for children under 14 years.

Article number: 300087099 Product: Tamiya Cera-Grease HG 10g

This Cera-grease HG is made using Boron Nitride which gives it superior lubrication ability. Cera-grease can be used with MINI 4WD cars, R/C Cars, Robocraft gears and bearings, and provide excellent lubrication for plastic and metal parts. The 10g aluminum tube comes with its own nozzle for easy application. *Please note: Do not apply to power switches.

Cera-Grease HG

Warning! Not suitable for children under 14 years.

Weathering Master E Set

Warning! Not suitable for children under 14 years.

Liquid Primer (White/40ml)

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300087090 Product: Tamiya Comp.-Applicator-Set (3)pi/bl/wh

Tamiya presents this set of three 260mmX190mm compound application cloths for use in plastic model building. These soft, delicate cloths made with ultra-fine microfibers and are ideal for applying Tamiya Polishing Compound and Tamiya Modeling Wax, giving the model's surface a beautiful mirror-like finish. Even on clear parts, these cloths will not leave any blemishes, so they will greatly improve polishing efficiency. With one blue, one pink, and one white cloth in this set, you can easily designate the cloths for use with specific types of compound.

Article number: 300087089 Product: Tamiya Airbrush Cleaner Acryl 250ml

This powerful cleaner is indispensible for airbrush maintenance. Easily removes any tarnishes in the intricate airbrush system and it can also be used to clean weathering sticks and paintbrushes.

Warning! Not suitable for children under 14 years.

Weathering Master D Set

Warning! Not suitable for children under 14 years.

Weathering Stick (Light Earth)

Warning! Not suitable for children under 14 years.

Weathering Stick (Sand)

Warning! Not suitable for children under 14 years.

Weathering Master C Set

Warning! Not suitable for children under 14 years.

Article number: 300087084 Product: Weathering Sponge Brush Fine

These specially designed sponge brushes allow extremely detailed weathering work using Tamiya's popular Weathering Master material. Resilient sponge brush features long handle and comfortable grip making this tool very easy to use. Brushes available in medium and fine sizes.

Weathering Sponge Brush Fine

Article number: 300087083 Product: Weathering Sponge Brush Medium

These specially designed sponge brushes allow extremely detailed weathering work using Tamiya's popular Weathering Master material. Resilient sponge brush features long handle and comfortable grip making this tool very easy to use. Brushes available in medium and fine sizes.

Weathering Sponge Brush Med

Warning! Not suitable for children under 14 years.

Weathering Stick (Snow)

Warning! Not suitable for children under 14 years.

Weathering Stick (Mud)

Warning! Not suitable for children under 14 years.

Weathering Master B Set

Warning! Not suitable for children under 14 years.

Weathering Master A Set

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Polishing Compound (Finish)

Polishing Compound (Fine)

Polishing Compound (Coarse)

Article number: 300087067 Product: Modeling Brush HF Standard Set

The HF Standard Set is for those who wish to gain a more beautiful and impressive finish on their model, whether they are beginners, intermediate or experts. Comes with High Finish Flat Brush No.0, High Finish Flat Brush No.2 and High Finish Pointed Brush (Ultra Fine). Brushes employ special plastic hair suitable for model painting.

Article number: 300087066 Product: Modeling Brush Basic Set

This Basic Set is aimed at the beginner modeler. A perfect first-time modeling paintbrush set for those just starting out in the modeling world. The set features Tamiya Flat Brush No. 3, Flat Brush No. 1 and Pointed Brush (Small).