Accessories

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300074150 Product: Modeling Template Round 1-12.5

Tamiya's engraving blades are a fine addition to any modeler's tool kit, allowing scribing of fine, precision lines. Now, you can use them to scribe curves and circles with ease thanks to this new set of photo-etched stainless steel template sheets!

Item Contents/Information

• Photo-Etched Template Fret x1
• The fret includes 3 sheets of circular templates
  ranging from 1mm to 12.5mm diameters, in 0.25mm intervals.
• Templates are manufactured in 0.1mm thickness stainless
  steel, allowing you to bend it against convex surfaces such
  as aircraft fuselage pieces (minimum target component
  radius is 30mm)

Warning! Not suitable for children under 14 years.

Article number: 300074149 Product: Cutting Mat α (A4/Blue)

This is a new size of cutting mat in the same easy-use, odorless material as Item 74142 (A5 size) and Item 74144 (A3 half-size). A4 is a happy medium of compactness and workspace, and this mat has an array of useful markings to help with your model making activities!

• Dimensions: 220mm x 300mm x 2mm thickness. The surface area slightly exceeds A4 in length and width.
• Made from semi-transparent blue-green resin with virtually zero odor.
• 3-ply mat features an internal hard layer sandwiched by softer outer layers, increasing knife blade longevity while leaving minimal cut marks.
• Markings printed on the front side include: useful grids, increment angles, and curved and circular markings.
• Features a scale ruler for easy switching between 1/1, 1/24, 1/32, 1/35 and 1/48, plus handy markings to aid in the cutting out of thin masking tape strips.
• Reverse side is left plain.

Warning! Not suitable for children under 14 years.

Article number: 300074148 Product: Fine Engraving Needle 20°

As its name suggests, this fine engraving needle has a pointed tip rather than the hooked one seen in our engraving blades. This allows easier scribing of curved details.

• Fine Engraving Needle x1
• Total length: 25mm. Shank diameter: 2mm. Needle point angle is 20°.
• Crafted from cemented carbide, with a precision finish.
• Recommended for use with dedicated holder: Item 74139 Engraving Blade Holder. Also compatible with Fine Pin Vise D (Item 74050) and D-R (Item 74112).
• Simply hold and pull lightly across the surface to score it. Repeat as necessary to achieve a clearly-defined result.
• Comes in a case that can hold up to ten needles, and separately sold engraving blades.

Warning! Not suitable for children under 14 years.

Article number: 300074147 Product: Fine Engraving Blade 0.4mm

Engraving to emphasize details such as panel lines, or even add custom detail is a popular advanced modeling method. Tamiya makes this advanced modeling technique easy with its line-up of engraving blades. These fine engraving blades are made from tungsten carbide, and offer a smooth, consistent finish. They are available in a choice of 5 thicknesses to meet your modeling needs.

• 0.4mm Fine Engraving Blade x1
• Total length: 25mm. Shank diameter: 2mm.
• Recommended for use with dedicated holder Item 74139 Engraving Blade Holder. Also compatible with Fine Pin Vise D (Item 74050) and D-R (Item 74112).
• Simply hold at a 45- to 60-degree angle and pull lightly across the surface to score it. Repeat as necessary to achieve a clearly-defined result.
• Comes in a case that can hold up to ten blades.
• A color-coded marking on the shank allows easy identification of blade thickness.

Warning! Not suitable for children under 14 years.

Article number: 300074145 Product: Fine Engraving Blade 0.15mm

Engraving to emphasize details such as panel lines, or even add custom detail is a popular advanced modeling method. Tamiya makes this advanced modeling technique easy with its line-up of engraving blades. These fine engraving blades are made from tungsten carbide, and offer a smooth, consistent finish. They are available in a choice of 5 thicknesses to meet your modeling needs.

• 0.15mm Fine Engraving Blade x1
• Total length: 25mm. Shank diameter: 2mm.
• Recommended for use with dedicated holder: Item 74139 Engraving Blade Holder. Also compatible with Fine Pin Vise D (Item 74050) and D-R (Item 74112). • Simply hold at a 45- to 60-degree angle and pull lightly across the surface to score it. Repeat as necessary to achieve a clearly-defined result.
• Comes in a case that can hold up to ten blades.
• A color-coded marking on the shank allows easy identification of blade thickness

Warning! Not suitable for children under 14 years.

Article number: 300074144 Product: Side Cutter α Purple

This is a cutting mat used for working on small projects where the use of a cutting blade is needed. It will protect table surfaces from unwanted cuts and nicks.

• Dimensions: 145mm x 450mm x 2mm thickness.
• Made from semi-transparent blue-green resin with virtually zero odor.
• 3-ply mat features an internal hard layer sandwiched by softer outer layers, increasing knife blade longevity while leaving minimal cut marks.
• Markings printed on the front side include: useful grids, increment angles, and curved and circular markings. It also features a scale ruler for easy switching between 1/1, 1/24, 1/35 and 1/48, plus handy markings to aid in the cutting out of thin masking tape strips.

Warning! Not suitable for children under 14 years.

Article number: 300074143 Product: Modeling Flat Chisel Blade 2mm

• Material: High-Speed Steel
• Length: 25mm, blade width: 2mm, diameter: 2mm.
• A handy case is included for storage of the blade when not in use.
• Thicker protrusions should be filed down first, and this blade used for their final removal.
• Compatible with Item 74139 (recommended) and Item 74112

Warning! Not suitable for children under 14 years.

Article number: 300074142 Product: Cutting Mat α (A5/Blue)

This is a new size of cutting mat in the same easy-use, odorless material as Item 74142 (A5 size) and Item 74144 (A3 half-size). A4 is a happy medium of compactness and workspace, and this mat has an array of useful markings to help with your model making activities!

• Dimensions: 220mm x 300mm x 2mm thickness. The surface area slightly exceeds A4 in length and width.
• Made from semi-transparent blue-green resin with virtually zero odor.
• 3-ply mat features an internal hard layer sandwiched by softer outer layers, increasing knife blade longevity while leaving minimal cut marks.
• Markings printed on the front side include: useful grids, increment angles, and curved and circular markings.
• Features a scale ruler for easy switching between 1/1, 1/24, 1/32, 1/35 and 1/48, plus handy markings to aid in the cutting out of thin masking tape strips.
• Reverse side is left plain.

Warning! Not suitable for children under 14 years.

Article number: 300074140 Product: Fine Pivot Bit1.1mm Shank1.5mm

Fine pivot drill bits allow the drilling of very precise holes. Pivot drill bits have bits which are thinner than their shank, for greater resistance against shattering and decreased deviation. These bits complement existing 0.2-0.5mm (Items 74113-74116), 0.6-0.7mm (Items 74127-74128) and 0.8-1.0mm (Items 74132-74134) bits.
 

•Durable material is shatter-resistant and is marked with bit size for easy recognition.
•High-quality bit finish gives excellent hole quality.
•Can be used on a range of materials including plastic, metal, brass and wood.
•Each size comes with a plastic storage case.
•Compatible with 74050 Pin Vise D and 74112 Pin Vise D-R.

Warning! Not suitable for children under 14 years.

Article number: 300074139 Product: Engraving Blade Holder

This is a lightweight, ergonomically designed holder for Tamiya’s line-up of Fine Engraving Blades. (Items 74135-38)
 

Warning! Not suitable for children under 14 years.

Article number: 300074138 Product: Fine Engraving Blade 0.5mm

Engraving to emphasize details such as panel lines, or even add custom detail is a popular advanced modeling method. Tamiya makes this advanced modeling technique easy with its line-up of engraving blades. These fine engraving blades are made from tungsten carbide, and offer a smooth, consistent finish. They are available in a choice of 4 thicknesses to meet your modeling needs.
 

Warning! Not suitable for children under 14 years.

Article number: 300074137 Product: Fine Engraving Blade 0.3mm

Engraving to emphasize details such as panel lines, or even add custom detail is a popular advanced modeling method. Tamiya makes this advanced modeling technique easy with its line-up of engraving blades. These fine engraving blades are made from tungsten carbide, and offer a smooth, consistent finish. They are available in a choice of 4 thicknesses to meet your modeling needs.
 

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300074135 Product: Fine Engraving Blade 0.1mm

Engraving to emphasize details such as panel lines, or even add custom detail is a popular advanced modeling method. Tamiya makes this advanced modeling technique easy with its line-up of engraving blades. These fine engraving blades are made from tungsten carbide, and offer a smooth, consistent finish. They are available in a choice of 4 thicknesses to meet your modeling needs.

Warning! Not suitable for children under 14 years.

Article number: 300074134 Product: Fine Pivot Bit1.0mm Shank1.5mm

This fine pivot drill bit allows the drilling of precise holes. Pivot drill bits have bits which are thinner than their shank, and they provide greater resistance against shattering while offering decreased deviation.
 

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300074124
Product: Plastic & Soft Metal Scissors

These versatile scissors are a must-have addition to every modeler's tool kit - not only can the high-quality blades cut through plastic such as the polycarbonate used on many Tamiya R/C model bodies, they can also handle softer metals and other materials/thicknesses above and beyond the capabilities of standard scissors.

Length: 170mm; blade length: 40mm.
Blade material: anti-rust treated stainless steel.
Features a stylish navy blue grip. Suitable material thicknesses that may be cut: Note: materials and thicknesses are intended as a guideline only.
Tamiya Pla-plate: up to 1.2mm
Tamiya Clear Pla-plate: up to 0.5mm
Polycarbonate: up to 1.0mm
Other plastics: up to 1.0mm
Aluminum: up to 0.5mm
Copper/Brass/Nickel: up to 0.3mm
Leather: up to 2.0mm
Paper: up to 2.0mm
Cardboard/Rubber sheeting: up to 5.0mm

Warning! Not suitable for children under 14 years.

Article number: 300074123
Product: SP Side Cutter (Slim Jaw)

This tool is designed to remove scale model plastic parts from the parts sprue. The sharp jaw blades offer an excellent cutting edge, and they have a slightly slimmer jaw than previous Tamiya plastic cutter products, enabling easier removal of smaller parts which have less clearance.

•Length: 115mm.
•Easy-to-use tool features slim jaw with an excellent balance of durability and cutting edge.
•PVC grip covers ensure that the side cutters stay firmly in your hand during use.
•The tool is marked with the twin star logo and TAMIYA CRAFT TOOLS FOR PLASTIC

Warning! Not suitable for children under 14 years.

Article number: 300074118
Product: Tamiya Cutting Mat DIN-A4, Green

Every modeler needs a suitable surface upon which to create their masterpieces, and now Tamiya offers a great solution. This green version of the popular Tamiya Cutting Mat Beige (Item 74056; please note new name) offers excellent visibility of a wide range of colors of plastic part, and at just larger than A4 is a handy size.

About the Item
• 3-ply material with a harder core sandwiched by softer outer layers. Surface is easy on your knife blade but does not sustain cut marks easily.
• Features one unmarked side and one side with a range of markings including 1cm grid, 1mm interval ruler, curves and circles.
• Mat is made of dark green material.

Warning! Not suitable for children under 14 years.

Article number: 300074117
Product: Craft Tools Bending Tweezers PE Parts

Unlike standard tweezers, these have been designed specifically for the job of picking up and bending the very fine parts found in photo etched parts sets. With a number of photo etched parts sets now available in the Tamiya line-up, and some kits even including them right out of the box, these tweezers will be a fine addition to any modeler’s toolbox.

Designed for precision bending of brass or nickel silver photo-etched parts.
The tips of the tweezers have been made as thin as possible to suit this tool to the task.
Can be used to bend parts along fold lines of up to 10mm in length.
Made from stainless steel. Length: 100mm

Warning! Not suitable for children under 14 years.

Article number: 300074113 Product: Fine Pivot Bit 0.2mm Shank 1mm

This fine pivot drill bit allows the drilling of precise holes. Pivot drill bits have bits which are thinner than their shank, and they provide greater resistance against shattering while offering decreased deviation.

• Durable material is shatter-resistant.
• High-quality bit finish delivers excellent results.
• Compatible with 74050 Pin Vise D, 74051 Pin Vise S and 74112 Pin Vise D-R.

Warning! Not suitable for children under 14 years.

Article number: 300074112 Product: Fine Pin Vise D-R (0.1-3.2mm)

The pin vise is an important tool in the armory of any modeler, allowing the making of precision holes for the purpose of modifying scale models.

- Compatible with drill bits of sizes from 0.1-3.2mm. 
- Rotating grip end features built-in ball bearings for smooth movement. 
- Made from nickel-plated brass, with elastomer grip. 
- Features metallic sticker with the Tamiya twin star logo and wording "PIN VISE". 
- The rubber grip is engraved with the wording "TAMIYA".
 

Warning! Not suitable for children under 14 years.

Article number: 300074111 Product: Handy Craft Saw II

This handy tool is perfect for modifying plastic models or Mini 4WD machines, as well as woodcraft. Its blades are slightly thicker than Item 74018 Mini Razor Saw and therefore less prone to distortion or warping. The item includes 2 blades of different width, and features fine teeth which enable it to cut through a variety of materials while leaving a smooth finish. The 2 blades can be inserted into the included plastic grip, which features the Tamiya logo and "TAMIYA CRAFT TOOLS" in printed lettering.

About the Item
• Includes wide carbon steel blade x1 and slim carbon steel blade x1
• Both blades are of .35 mm thickness.
• Wide blade length: 46 mm
• Slim blade length: 43 mm
 

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300074105
Product: Fine Craft Saw blade III 0,15mm thick

In some situations, the cut made by a normal modeling saw may be too wide, leading to unwanted changes to the length of the part. This set of saws solves this problem as they are made from 0.15mm thick etched metal. The grips of the saws can be folded over and attached to a Modeler's Knife (Item 74040) for precise cutting control. The set includes four types of saw blades which can be used for a variety of situations.

Warning! Not suitable for children under 14 years.

Article number: 300074104 Product: Basic File Set (Smooth Double-Cut)

This handy file set contains 3 double-cut files with black rubber grips which provide a smooth finish desired on plastic scale models, Mini 4WD models and even metal surfaces. The files can be stored in the accompanying vinyl case to keep them safe from damage.

- 3 types of file: round, semi-circular, and flat. 
- Length: 140mm
- Handle diameter: 2.5mm
- 38 cuts/cm 

Warning! Not suitable for children under 14 years.

Article number: 300074103
Product: Tamiya HG RevAction straight Tweezers

Compared to standard tweezers, the operation mechanism for these tweezers is reversed: squeeze the handle to open and release to close. As such, these tweezers can be easily wielded while they are holding objects, thereby greatly reducing hand fatigue. The straight tip makes for simple operation. Tweezers are made from stainless steel and feature vulcanized fiber grips.

Warning! Not suitable for children under 14 years.

Article number: 300074102
Product: Tamiya HG RevAction Angled Tweezers

Compared to standard tweezers, the operation mechanism for these tweezers is reversed: squeeze the handle to open and release to close. As such, these tweezers can be easily wielded while they are holding objects, thereby greatly reducing hand fatigue. The angled tip also enables access to tight spaces. Tweezers are made from stainless steel and feature vulcanized fiber grips.

Warning! Not suitable for children under 14 years.

Article number: 300074101 Product: Tamiya Modeler´s Blade Pro chisel (10)

- Chisel blade x 10pcs.
- 0.55mm thick.
- Suitable for chiseling, engraving, and removing protrusions from flat surfaces.

Warning! Not suitable for children under 14 years.

Article number: 300075100 Product: Tamiya Modeler´s Blade Pro curved (3)

- Curved blade x 3pcs.
- 0,45 mm thick.
- Suiteable for cutting soft fabric such as film, Cloth, and Japanese paper.

Warning! Not suitable for children under 14 years.

Article number: 300074099
Product: Tamiya Modeler´s Blade Pro straight (5)



Straight Blade x5 Pcs.
0.5mm thick
Suitable for very precise and detailed work.

Warning! Not suitable for children under 14 years.

Article number: 300074098
Product: Tamiya Modeler's Knife Pro reinf. Handle

This professional knife is ideal for precision tasks. Set includes Straight blade (3pcs.), Curved blade (2pcs.), and Chisel blade (2pcs.). The body features an elastomer grip and a metal chuck to secure the blade. Protective cap for the knife and a plastic spare blade case are also included.

Warning! Not suitable for children under 14 years.

Article number: 300074097
Product: Tamiya Fin.CraftSaw PE-Blade 0,1mm (2x3)

These scribing saws are ideal for remaking details that are lost when cleaning up seam lines or deepening existing panel lines. Compared with Item 74094, the teeth of these saws are smaller and have a finer pitch. Both straight and rounded saw blades are included. The grips can be folded over for the saws to be used as they are, and they may also be attached to a Modeler's Knife (Item 74040). Made from 0.1mm thick stainless steel.

Warning! Not suitable for children under 14 years.

Article number: 300074094
Product: Tamiya PhotoEtched 0,1mm Saw Blade (5)

This set of thin craft saws is made from photo-etched metal to enable extremely fine cuts. The blades feature grips which can be folded 011er to increase support and this feature also allows them to be fitted onto the Modeler's Knife's handle for greater ease of use.

Warning! Not suitable for children under 14 years.

Article number: 300074093
Product: Tamiya Modelers Side Cutter Gray/Plastic

This Modeler's Side Cutter is designed for use with plastic parts and is ideal for scale models and Mini 4WD products assembly. The cutter's blades are made with hardened carbon steel and will remain sharp for a long period of time.

Warning! Not suitable for children under 14 years.

Article number: 300074092
Product: Mag Visor w/Lenses 1,7/2/2,5x

The Magnifying Visor enables you to view an enlarged, wide viewing area for detailed modeling or even reading a book. The head-mounted magnifying visor can easily be worn like a pair of glasses and frees up your hands to work on plastic models and crafts.

Warning! Not suitable for children under 14 years.

Article number: 300074091
Product: Plastic Scriber II

This tool is perfect for tasks such as scoring and cutting plastic sheets, creating mold lines on model parts, and modifying Mini 4WD machines. The blade can be retracted after use and two spare blades are also stored inside the handle.

Warning! Not suitable for children under 14 years.

Article number: 300074086
Product: Tamiya Modeling Drill Chuck

This modeling drill chuck handle comes in very handy in times where a normal pin vise does not have what it takes to do the job and where an electric drill is too powerful.

About the Item

Comes with a easy gripping blue handle.
The chuck is compatible with 1.5-6.5mm drill bits.

Warning! Not suitable for children under 14 years.

R/C Tool Set (8pcs)

Warning! Not suitable for children under 14 years.

Article number: 300074084
Product: Mini Bending Pliers for PE

These bending pliers are perfect for small photo-etched parts which have no identifiable bending lines. The flat tip of these pliers will give any modeler peace of mind as even if the PE parts are held firmly, they will not be scratched. When bending PE parts at right angles, sometimes the bent section will spring back, but these pliers make the bending of such angles easy without the need for special techniques. The pliers come with very comfortable grips. It is possible to bend straight lines up to 15mm at a time with this tool and it can also be used with other materials such as plastic.

Mini Bending Pliers for PE

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300074080
Product: Tamiya Craft Tweezers

- These are craft tweezers that are most suitable for papercraft work.
- The foremost part has an original TAMIYA design.
- The design helps improve effectiveness in gluing and the bending of the paper, as well as the drying process.
- It can also be used with the application of stickers and decals.
- Length: 140 mm, has a SUS410 stainless hairline finish.

Warning! Not suitable for children under 14 years.

Article number: 300074078
Product: Tamiya Model Cleaning Brush Anti-Static

Dust Be Gone!

This new Model Cleaning Brush has been specially designed to help keep your display models looking sharp. Its fibers not only remove dust and debris, but also static electricity to prevent dust build-up. The long fibers of the main brush makes cleaning around delicate parts easy, while the mini brush lets you get to those hard to reach areas. This brush is not just perfect for maintaining the look of plastic models, it's also great for cleaning other household items.

Warning! Not suitable for children under 14 years.

Article number: 300074077
Product: Paint Jar Stand

Rotating two-tier paint jar stand lets you organize your paints clearly for easy access. It can store up to 7 jars of acrylic "mini" or 9 jars of enamel paints per tray. Each tray has a small groove along its edge, allowing you to also use this as a drying stand simply by using alligator clips (4 included) to hold newly painted parts.
*PAINT NOT INCLUDED

Paint Jar Stand

Warning! Not suitable for children under 14 years.

Article number: 300074076
Product: Cutting Mat (A3)

Handy mat for cutting plastic bands, decals, and masking tape. The large A3 size allows you to cover more of your work area. Made of both hard and soft materials in a three layer construction, incisions made into this long-lasting mat will be hardly noticeable.

Cutting Mat (A3)

Warning! Not suitable for children under 14 years.

Modeler's knife blade*25

Warning! Not suitable for children under 14 years.

Design Knife Blade*30

Warning! Not suitable for children under 14 years.

Article number: 300074069
Product: Tamiya Plastic Model.File Flat 6mm width

6mm wide file features wave pattern teeth, and special design to prevent teeth from clogging with shavings, ensuring continued high quality finish. Conventional flat shape will provide professional finish for any form of areas

Warning! Not suitable for children under 14 years.

Article number: 300074068
Product: TAMIYA Modeling Scissors for PE-Parts

Adding photo-etched parts is one of the best ways to give your model a professional-level finish, ensuring that it stands out from the pack. However, we all know that working with stainless metal parts can be trickier than with standard plastic parts. Tamiya is offering the following 3 craft tools to make using photo-etched parts easier than ever before. Purchase all 3 tools to vastly simplify your modeling work; it's as easy as 1-2-3!

1 - Cutting Out Parts - Use Modeling Scissors
2 - Removing Flash - Use Diamond File
3 - Bending/Shaping - Use Bending Pliers

About the Scissors

- Small size (1cm) blades last longer than modeling knife, perfect for cutting out small parts.
- Easy-to-use shape suited to precision photo-etched part work (canot cut thicker surfaces)
- Includes special cap to preserve blades.

Modeling Scissors

Warning! Not suitable for children under 14 years.

Article number: 300074067
Product: Bending Plier for Photo Etched

Adding photo-etched parts is one of the best ways to give your model a professional-level finish, ensuring that it stands out from the pack. However, we all know that working with stainless metal parts can be trickier than with standard plastic parts. Tamiya is offering the following 3 craft tools to make using photo-etched parts easier than ever before. Purchase all 3 tools to vastly simplify your modeling work; it's as easy as 1-2-3!

1 - Cutting Out Parts - Use Modeling Scissors
2 - Removing Flash - Use Diamond File
3 - Bending/Shaping - Use Bending Pliers

About the file

- Diamond file is perfect for light carving of hard materials like stainless metal.
- File won't snag on thin photo-etched parts and carves equally well in any direction.
- File features half-circle shape for easy filing in hard-to-reach places.

Bending Plier for Photo Etched

Warning! Not suitable for children under 14 years.

Article number: 300074066
Product: Diamond File for Photo Etched

Adding photo-etched parts is one of the best ways to give your model a professional-level finish, ensuring that it stands out from the pack. However, we all know that working with stainless metal parts can be trickier than with standard plastic parts. Tamiya is offering the following 3 craft tools to make using photo-etched parts easier than ever before. Purchase all 3 tools to vastly simplify your modeling work; it's as easy as 1-2-3!

1 - Cutting Out Parts ------------> Use Modeling Scissors
2 - Removing Flash -------------> Use Diamond File
3 - Bending/Shaping ------------> Use Bending Pliers

About the File

Diamond file is perfect for light carving of hard materials like stainless metal.
File won't snag on thin photo-etched parts and carves equally well in any direction.
File features half-circle shape for easy filing in hard-to-reach places.

Diamond File for Photo Etched

Warning! Not suitable for children under 14 years.

Article number: 300074065
Product: Tamiya Non-Scratch Long Nose Pliers

The solid pliers of TAMIYA with scratch protect on the shoes is a help for assembling snubbers, steering tie rods and other weak components. The handle bars are occupied with soft and slip-proof casing.

Scope of delivery:
1 plier

Warning! Not suitable for children under 14 years.

Work Stand w/Magnifying Lens

Warning! Not suitable for children under 14 years.

Article number: 300074056
Product: TAMIYA Cutting Mat DIN-A4 grey

Convenient and versatile cutting mat features printed graph, circle, angle and right angle lines for easy reference. Unmarked reverse side can also be used. High quality material doesn't leave marks when cut and will not dull blades.

Cutting Mat (A4)

Warning! Not suitable for children under 14 years.

Fine Craft Knife

Warning! Not suitable for children under 14 years.

Article number: 300074052
Product: TAMIYA Decal Tweezers

Ideal for not only small decals but also capable of delicately holding larger decals without damaging them. Larger decals can be easily held by the lower part of the tip, while smaller ones can be grasped delicately with the tweezer tips.

Decal Tweezers

Warning! Not suitable for children under 14 years.

Article number: 300074051
Product: Tamiya Fine Pin Vise (0,1-1,0mm)

Model assembly often calls for the drilling of holes of various sizes and these Fine Pin Vises are the ideal tools for the job. The Fine Pin Vise D is compatible with 0.1mm-3.2mm diameter drill bits while the Pin Vise S is designed for use with drill bits under 1 mm diameter.

Warning! Not suitable for children under 14 years.

Article number: 300074050
Product: Fine Pin Vise D (0.1?3.2mm)

Model assembly often calls for the drilling of holes of various sizes and these Fine Pin Vises are the ideal tools for the job. The Fine Pin Vise D is compatible with 0.1mm-3.2mm diameter drill bits while the Rne Pin Vise S is designed for use with drill bits under 1 mm diameter.

Fine Pin Vise D (0.1?3.2mm)

Warning! Not suitable for children under 14 years.

Basic Drill Set

Warning! Not suitable for children under 14 years.

Article number: 300074048
Product: Tamiya HG Straight Tweezers

These precision made stainless steel tweezers are ideal for handling small, delicate plastic model parts. An angled type which can access hard to reach areas and a straight type which directly transmits finger movements to the tip for optimum control are available.

Warning! Not suitable for children under 14 years.

Article number: 300074047
Product: HG Angled Tweezers

These precision made stainless steel tweezers are ideal for handling small, delicate plastic model parts. An angled type which can access hard to reach areas and a straight type which directly transmits finger movements to the tip for optimum control are available.

HG Angled Tweezers

Warning! Not suitable for children under 14 years.

Article number: 300074046
Product: TAMIYA Basic File Set (3)

This set contains three types of files; flat, round and half-round, specially developed for modeling use. Files are suitable for working plastic and soft metals. Each file features a compact size of approximately 16cm in length.

Basic File Medium Double-Cut

Warning! Not suitable for children under 14 years.

Fine Drill Set

Warning! Not suitable for children under 14 years.

Modeler's Knife

Warning! Not suitable for children under 14 years.

Article number: 300074035
Product: TAMIYA Sharp Pointed Side Cutter for Plastic

This precision side cutter has thin, pointed blades, and is ideal for removing delicate plastic parts from sprue. The blades are made from quality chrome-vanadic alloy, and are hand-finished for optimum sharpness.

Sharp Pointed Side Cutte

Warning! Not suitable for children under 14 years.

Article number: 300074032
Product: E-Ring Tool 2 mm

This tool for 2mm E-rings is extremely useful during construction and maintenance of RIC models. The unique shape of the specially designed tip makes it easy to attach and remove tiny E-rings.

Warning! Not suitable for children under 14 years.

Article number: 300074031
Product: Decal Scissors

These Tamiya Decal Scissors are made of high quality carbon steel and are perfect for two major applications.

The first application is for cutting out your paper decals from a plastic model kit. The sharp carbon steel and fine point makes it easy for trimming the most intricate of decal designs. Note: The sharpness of the scissors will last long if used for paper decals only. Do not use for vinyl stickers like the ones found in an R/C car kit.
The second application is for trimming R/C racing rubber tires. R/C racing rubber tires are generally soft and flash from the molding process needs to be trimmed away. Using Tamiya's carbon steel decal scissors makes this task easy and quick for both on-road and off-road rubber tires. These scissors may also be used for modifying rubber tires to suite the needs of the racer. Often times a racer may need to build a tire for a unique track condition. To do this the racer generally needs to precisely cut the tire that they are modifying and the Tamiya carbon steel decal scissors makes this task easy.

Decal Scissors

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300074023
Product: Tamiya Screwdriver Assortment

This is a set of 8 screwdrivers of assorted types and sizes. Set consists of three sizes of (+) screwdrivers, two (-) screwdrivers, two nut drivers and a hex wrench, plus a detachable grip. Packaged in a handy plastic carrying case.

"""BUILDER'S 8""""Screwdriver"" """

Warning! Not suitable for children under 14 years.

Design Knife

Warning! Not suitable for children under 14 years.

Article number: 300074017
Product: Paint Stirrer Metal (2)

This stainless steel tool is designed for stirring bottled paints, and for blending different color shades. One end is shaped like a small spoon, while the other is flat, like a spatula. Tool length is 15cm. Includes two stirrers.

Warning! Not suitable for children under 14 years.

Article number: 300074016
Product: Tamiya Basic Tool

This set contains the basic, indispensable tools for model and craft work: A pair of side cutters for plastic, angled tweezers, small (+) and (-) screwdrivers, a craft knife and a file, all neatly packed in a handy plastic case.

Tamiya Basic Tool

Warning! Not suitable for children under 14 years.

Tamiya Craft Knife

Warning! Not suitable for children under 14 years.

Article number: 300074005
Product: TAMIYA curved Scissors for PC

These quality scissors come in handy when trimming polycarbonate R/C car bodies. The curved blades enable easy access to body curves, and are made of high quality stainless steel for durability and long life.

Curved Scissors

Warning! Not suitable for children under 14 years.

Article number: 300074004
Product: TAMIYA Tweezers straight

These quality straight tweezers come in handy when adding small parts to your model and for other jobs requiring precision work. Made from stainless steel with a black cationic finish for long life.

Straight Tweezers

Warning! Not suitable for children under 14 years.

Article number: 300074003
Product: Angled Tweezers

These angled tweezers are useful for handling small parts and adding decals to your models. The edges are rounded to prevent scratching. Made from stainless steel with a black cationic finish for long life.

Angled Tweezers

Warning! Not suitable for children under 14 years.

Article number: 300074001
Product: Side Cutter for Plastic

This is a precision side cutter for removing parts from sprue without damaging them. Developed exclusively for plastic modeling, the impact resistant chrome vanadic alloy material was chosen for long life. High quality vinyl covering assures good grip.

Side Cutter for Plastic

Warning! Not suitable for children under 14 years.

Article number: 300073023 Product: Tamiya Logo Plate

★Let the world know where your modeling loyalties lie with this sheet containing photo-etched versions of the famed Tamiya twin star logo!
★Crafted in 0.3mm thickness stainless steel plate.
★Features standard and negative versions of the logo - four types, with fourteen logos in total. ★Sheet dimensions: 90mm x 90mm.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.