Tools

Article number: 300010327
Product: HG Airb. Nozzle 0.3mm 74510/532/537/540

This component, which was previously only available as an 8-digit spare part, is now to be released in our AO series of parts. Change parts when they show wear and tear to maintain high levels of performance.

Item Contents/Information
• HG Airbrush Nozzle (0.3mm) x1
• 0.3mm nozzle is capable of marking very fine lines.
• Compatible with Items 74510, 74532, 74537 and 74540.

Article number: 300010326
Product: HG Trigger Air..Needle f. SW 74510/74540

This component, which was previously only available as an 8-digit spare part, is now to be released in our AO series of parts. Change parts when they show wear and tear to maintain high levels of performance.

Item Contents/Information
• HG Trigger-Type Airbrush Needle x1
• Protective tubing is also included.
• Compatible with Item 74510 Spray-Work HG Trigger-Type Airbrush and Item 74540 Spray-Work HG Trigger-Type Airbrush (w/Integrated Cup).

Article number: 300010325
Product: HG Airbrush Needlef. SW 74532/74537

This component, which was previously only available as an 8-digit spare part, is now to be released in our AO series of parts. Change parts when they show wear and tear to maintain high levels of performance.

Item Contents/Information
• HG Airbrush Needle x1
• Protective tubing is also included.
• Compatible with Item 74532 Tamiya Spray Work HG Airbrush III and Item 74537 Spray-Work HG Airbrush (w/Integrated Cup).

Article number: 300174559
Product: SW Air Compressor Advance

This is a very lightweight and compact air compressor designed to work with Tamiya’s Spray Work range of airbrushes. It includes an AC adapter with parts to allow use of power in countries across the globe! While compact, this compressor’s 0.08MPa continuous pressure rating ensures plenty of power for great paint jobs on a range of plastic models, from blanket painting of larger areas, to the picking out of more detailed sections like camouflage on military models.

• Compatible with Tamiya airbrushes.
• Compact unit features a dial to allow easy adjustment of air pressure.
• Comes with an airbrush hanger with a sensor switch that turns on the compressor when the airbrush is removed, and off when the airbrush is replaced again.
• Transparent coiled hose is included. Being see-through, it allows quick visual identification of any moisture build up, helping you to shut down the compressor before that water causes any ‘blushing’ (cloudy finishes).
• Low noise and vibration levels cause minimum disruption to the surrounding environment.
• Selected ratings: approx. 0.21MPa (30PSI) max pressure; approx. 0.08MPa (12PSI) continuous pressure, 45db noise level.
• Dimensions: 12.5cm x 10cm x 11.5cm. Weight: approx. 600g.

Article number: 300174545
Product: SW HG Airbrush III Super Fine 0,2/7ccm

The Spray-Work HG Airbrush III (Super Fine ) features a 0.2mm fine nozzle and is equipped with a removable paint cup (7cc) and is also compatible with separately sold plastic paint cups with larger capacities (Item 74511: 17cc / Item 74524: 40cc). The 0.2mm fine nozzle was only previously available with item 74514 Spray-Work HG Super Fine Airbrush which has an integrated (3cc) paint cup.

Article number: 300174056
Product: TAMIYA Cutting Mat DIN-A4 grey

Convenient and versatile cutting mat features printed graph, circle, angle and right angle lines for easy reference. Unmarked reverse side can also be used. High quality material doesn't leave marks when cut and will not dull blades.

Cutting Mat (A4)

Warning! Not suitable for children under 14 years.

Article number: 300174047
Product: HG Angled Tweezers

These precision made stainless steel tweezers are ideal for handling small, delicate plastic model parts. An angled type which can access hard to reach areas and a straight type which directly transmits finger movements to the tip for optimum control are available.

Article number: 300174016
Product: Tamiya Basic Tool

This set contains the basic, indispensable tools for model and craft work: A pair of side cutters for plastic, angled tweezers, small (+) and (-) screwdrivers, a craft knife and a file, all neatly packed in a handy plastic case.

Article number: 300174003
Product: Angled Tweezers

These angled tweezers are useful for handling small parts and adding decals to your models. The edges are rounded to prevent scratching. Made from stainless steel with a black cationic finish for long life.

Warning! Not suitable for children under 14 years.

Article number: 300089984
Product: Engraving Blade Holder Red

This is a color variation of the Engraving Blade Holder (original: Item 74139), with the handle in a vivid red. It can be used with the wide range of Tamiya Fine Engraving Blades and Needle.

Item Contents/Information
• Engraving Blade Holder (Red) x1
• Length: 126mm, diameter: 6mm.
• Made from lightweight, durable aluminum, with a knurled grip section for error-free crafting. The chuck is made of nickel-plated brass.
• The holder’s slimline form allows it to be held like a pen. It is marked with the twin star logo and the words TAMIYA CRAFT TOOLS.
• Blade insertion and removal is simple – just lightly pinch the chuck and rotate the handle.
• Comes with a protective cap that also stops the holder from rolling away.
• Compatible with Fine Engraving Blades (Items 74135-38, 74145), Needle (Item 74148) and Design Knife Blades (Item 74074).

Article number: 300087202
Product: 40ml Square Bottle Holder

Cement or other modeling aids accidentally spilling across your workbench could spell danger for your model and other materials – reduce the risk of accidents with this simple sponge holder, which is designed to fit snugly around the 40ml square bottles used for Tamiya Cement and other products, limiting the chance of their falling over if knocked.

Item Contents/Information
• Bottle Holder x1
• Use the included tab to link multiple holders together.
• Material: PE sponge
• Dimensions: 80mm x 80mm x 12mm

Warning! Not suitable for children under 14 years.

Article number: 300087112
Product: Tamiya Craft Spatula Width 20mm

This Craft Spatula features a new shape which allows for easy mixing and application of paints. This spatula is made from POM (a polyacetal resin) which makes it highly resistant to water and chemical damage and can also be used with the application of Epoxy Cement and putty.

Warning! Not suitable for children under 14 years.

Article number: 300074565
Product: Airbrush Regulator & Meter

This regulator, which was included in Item 74553 Spray-Work Power Air Compressor, is now to go on sale as an individual item.

Item Contents/Information
• This pressure regulator features a display meter and allows adjustment of your compressor’s output for fine paint jobs such as camouflage schemes, that require lower pressure.
• Features parts to attach the regulator to the Airbrush Stand III (Item 74564).

Article number: 300074564
Product: Spray-Work Airbrush Stand III

This stand fills an opening in the Tamiya Airbrush System line-up for a dual airbrush stand, which is sure to be of use when you are using multiple tools for a more complex paint job.

Item Contents/Information
• Airbrush Stand III x1
• Lightweight metal tubing has plastic cradle sections to securely hold airbrushes.
• Comes with a durable screw-type clamp that allows it to be secured on your compressor, workbench, etc.
• Compatible with Tamiya HG and Airbrush Lite series airbrushes.
• The clamp has holes to allow attachment of regulators such as Item 74565.

Article number: 300074563
Product: SW Advance & SX 0.3D

★This high quality air compressor is compatible with the range of Tamiya airbrushes.
★Dial allows easy adjustment of air pressure, for a range of jobs from large areas to fine detail such as camouflage schemes. ★Airbrush hanger works with sensor switch, turning on the compressor when the airbrush is removed, and off when the airbrush is replaced again.
★Comes with the SX 0.3D airbrush.

Specifications
★Dimensions: 12.5 x 7.0 x 11.5cm (depth: 10cm including hanger) ★Maximum output pressure: approx. 0.20MPa (30PSI) ★Continuous pressure: 0.08MPa (12PSI)
★Air output: 10 liters/min.
★Power consumption: 24W
★Noise level: 45db ★Weight: 0.6kg (not including cables and other accessories)
★AC adapter and coiled hose included.

Warning! Not suitable for children under 14 years.

Article number: 300074562
Product: Quick Hose Joint Plugs *2

These are replacement plug sections for the Quick Hose Joint, which allows you to (dis)connect airbrush and hose with a single touch – simply by sliding its center section!

Item Contents/Information

• Quick Hose Joint Plugs x2
• Compatible with Item 74561

Warning! Not suitable for children under 14 years.

Article number: 300074561
Product: Quick Hose Joint

Repeatedly hooking up your airbrushes to the hose and air supply can be something of a pain when you need more than one airbrush for a job. Say goodbye to those worries, with the Quick Hose Joint, which allows you to connect airbrush and hose with a single touch – simply slot in to connect and slide the center section to detach!

Item Contents/Information

• Quick Hose Joint x1
• Plugs x2
• Joint size: Type-S (PF-1/8)
• Compatible with all Tamiya Spray-Work series airbrushes. Spray-Work Basic Airbrush requires separately sold Connector Joint (Item 74536).
• Not compatible with Tamiya Badger airbrushes, air cans or Basic Compressor.

Warning! Not suitable for children under 14 years.

Artiicle number: 300074560 Product: Air Control Valve II

This TAMIYA air control valve offers improved functionality over the original Air Control Valve (Item 74552). Use it to make pinpoint adjustments to air pressure, for smooth paint jobs whether they include fine camouflage schemes or hard-to-reach nooks and crevasses.

• Air Control Valve II x1
• Simply connect between your airbrush and the air hose.
• Offers easy and fluid dial adjustment, from zero to max power.
• Smooth, quiet operation thanks to internal regulation of air (by contrast, Item 74552 simply allowed some air to escape).
• Utilizes PF1/8 (S) size joints.
• Not compatible with Spray Work Basic Air Compressor products.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300074546
Product: Airbrush Manifold 3 Ports

This handy manifold allows the simultaneous attachment of 3 airbrushes to only one air source, eliminating the need for constant detachment and reattachment when using different airbrushes.

• Features Type S (PF1/8) size ports and hose connector, the size most commonly used on airbrushes for scale model painting use.
• Compatible with not only Tamiya but also other brand airbrushes and hoses.
• Includes outlet caps for when not in use. Caps can be attached to the side of the manifold when an airbrush is connected to the port.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300074537
Product: HG Airbrush w/Integrated Cup

This is a double-action precision airbrush capable of spraying lines that are 1mm thick or less. Its newly designed trigger has been made with comfort in mind for those long airbrushing sessions. The airbrush features an integrated paint cup which holds 7cc of paint. The nozzle is .3mm in diameter and it can be easily cleaned after use using Tamiya"s high quality thinners and airbrush cleaning solvents.

Double action

.3mm nozzle

7cc paint cup

Gravity feed

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300074528
Product: TAMIYA Alligator Clip(4)f.Painting Stand

Handy clips for holding newly cemented or painted parts. These can be used together with the Tamiya Painting Stand (ITEM 74522), Work Stand (ITEM 74064), or the new Bottled Paint Stand (74077).

Alligator Clip for P. Stand*4

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300074522
Product: TAMIYA Painting Stand Set

The Spray-Work Painting Stand Set makes airbrushing and spray painting so easy!

A multipurpose painting stand set with 2 easy to use stands. Both stands can be adjusted and used for a wide range of sized and shaped pieces. The 16cm diameter turntable has different sized holes to affix various parts to the stand. Parts can be painted easily while still on the sprue or can be affixed to something like a pencil or chopstick inserted into the larger holes. Comes with 4 spring clips. Fixing a model body to the stand from the inside, the body stand is perfect for spray painting1/24 scale cars. The width of clips can also be adjusted to obtain the most stable hold.

Can be used with Model Painting Booths

Both body and turntable stands can be used with separately sold painting booths available at model hobby shops and art stores. By using these items, you can make your painting sessions easier by leaving your hands free.

Painting Stand Set

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300074157
Product: HG Tweezer Grip Scissors

These handy scissors are activated by pushing the grips together, for a safe cutting process: the same mechanism as used on the Mini 4WD Curved Scissors in Item 74151. Short, durable blades make them ideal for modeling uses such as on Mini 4WD vacuum molded bodies, decals, stickers, masking tape and more. You’ll wonder how you ever did without them!

Item Contents/Information
• HG Tweezer Grip Scissors x1
• Stainless steel blades provide a long lasting, quality cut.
• Activated by pushing the grips together, for an easy action and minimum interference from hands in the cutting process.
• A safety cap is also included to allow safe storage.
• Total length: 115mm; blade length: 12mm (approx.).

Article number: 300074156
Product: Modeling Template Square 1-10

Tamiya's engraving needle is a fine addition to any modeler's tool kit, allowing scribing of fine, precision lines. Now, you can use it to scribe squares with ease thanks to this new set of photo-etched stainless steel template sheets, which follows on from the round and rounded rectangle templates in Item 74150 and 74154 respectively.

Item Contents/Information
• Photo-Etched Template Fret x1
• The fret includes 4 sheets, each with square templates in 0.5mm length increments between 1mm and 10mm. Every sheet has a different corner style for its squares: right angle, R10%, R15% and R20%. The radius of rounded corners is calculated by multiplying square side length by R (10mm square x R10% = 1mm radius corners).
• Templates are manufactured in 0.1mm thickness stainless steel, allowing you to bend it against convex surfaces such as aircraft fuselage pieces (minimum target component radius is 30mm)

Article number: 300074155
Product: HG Tweezers Grip Tip

• HG Tweezers (Grip Type Tip) x1
• Tweezers are crafted in stainless steel.
• The use of 4 extrusions on the tip is a relatively unique design, and allows for secure grip of small components such as shafts and wire.

Warning! Not suitable for children under 14 years.

Article number: 300074154 Product: Modeling Template RR 1-6

Tamiya's engraving needle is a fine addition to any modeler's tool kit, allowing scribing of fine, precision lines. Now, you can use them to scribe rounded rectangles with ease thanks to this new set of photo-etched stainless steel template sheets, which follows on from the round templates in Item 74150.

Item Contents/Information

• Photo-Etched Template Fret x1
• The fret includes 3 sheets of rounded rectangle templates ranging from 1mm to 6mm in width, and 1.5mm to 12mm in length. The smallest measures 1mm x 1.5mm, and the largest 6mm x 12mm.
• Templates are manufactured in 0.1mm thickness stainless steel, allowing you to bend it against convex surfaces such as aircraft fuselage pieces (minimum target component radius is 30mm).

Warning! Not suitable for children under 14 years.

Article number: 300074153
Product: Craft Knife II

• The handle has an ergonomic shape designed for ease of use and replacement of blades, etc. It is molded in easy grip black plastic, with the Tamiya Craft Tools logo in white. A clip is designed into the back.
• A stainless steel blade has impressive resistance to rust. Simply remove, turn over and reset if you are lefthanded.
• The end of the handle has a part that is detached by squeezing the tabs on either side and can be used to snap off dulled blade sections.
• Features an auto-lock function to stop the blade slipping and the inherent dangers that brings.

Warning! Not suitable for children under 14 years.

Article number: 300074152
Product: Rt Screwdriver PRO &(+) Bit L

★This screwdriver’s ratcheting handle with precision 72T gear gives swift, smooth motion and no need to re-grip as you work on the screw.
★Change quickly between tightening, loosening and lock modes using the tab on the handle, and use the fingertip actuated Quick Rotation grip for speedy work on looser screws.
★The included precision bit is crafted in durable chrome molybdenum vanadium steel, and can be used on (+) screws between 3mm and 5mm.
★Magnetic bit helps prevent screws from being dropped.

Article number: 300074150 Product: Modeling Template Round 1-12.5

Tamiya's engraving blades are a fine addition to any modeler's tool kit, allowing scribing of fine, precision lines. Now, you can use them to scribe curves and circles with ease thanks to this new set of photo-etched stainless steel template sheets!

Item Contents/Information

• Photo-Etched Template Fret x1
• The fret includes 3 sheets of circular templates
  ranging from 1mm to 12.5mm diameters, in 0.25mm intervals.
• Templates are manufactured in 0.1mm thickness stainless
  steel, allowing you to bend it against convex surfaces such
  as aircraft fuselage pieces (minimum target component
  radius is 30mm)

Warning! Not suitable for children under 14 years.

Article number: 300074149 Product: Cutting Mat α (A4/Blue)

This is a new size of cutting mat in the same easy-use, odorless material as Item 74142 (A5 size) and Item 74144 (A3 half-size). A4 is a happy medium of compactness and workspace, and this mat has an array of useful markings to help with your model making activities!

• Dimensions: 220mm x 300mm x 2mm thickness. The surface area slightly exceeds A4 in length and width.
• Made from semi-transparent blue-green resin with virtually zero odor.
• 3-ply mat features an internal hard layer sandwiched by softer outer layers, increasing knife blade longevity while leaving minimal cut marks.
• Markings printed on the front side include: useful grids, increment angles, and curved and circular markings.
• Features a scale ruler for easy switching between 1/1, 1/24, 1/32, 1/35 and 1/48, plus handy markings to aid in the cutting out of thin masking tape strips.
• Reverse side is left plain.

Warning! Not suitable for children under 14 years.

Article number: 300074148 Product: Fine Engraving Needle 20°

As its name suggests, this fine engraving needle has a pointed tip rather than the hooked one seen in our engraving blades. This allows easier scribing of curved details.

• Fine Engraving Needle x1
• Total length: 25mm. Shank diameter: 2mm. Needle point angle is 20°.
• Crafted from cemented carbide, with a precision finish.
• Recommended for use with dedicated holder: Item 74139 Engraving Blade Holder. Also compatible with Fine Pin Vise D (Item 74050) and D-R (Item 74112).
• Simply hold and pull lightly across the surface to score it. Repeat as necessary to achieve a clearly-defined result.
• Comes in a case that can hold up to ten needles, and separately sold engraving blades.

Warning! Not suitable for children under 14 years.

Article number: 300074147 Product: Fine Engraving Blade 0.4mm

Engraving to emphasize details such as panel lines, or even add custom detail is a popular advanced modeling method. Tamiya makes this advanced modeling technique easy with its line-up of engraving blades. These fine engraving blades are made from tungsten carbide, and offer a smooth, consistent finish. They are available in a choice of 5 thicknesses to meet your modeling needs.

• 0.4mm Fine Engraving Blade x1
• Total length: 25mm. Shank diameter: 2mm.
• Recommended for use with dedicated holder Item 74139 Engraving Blade Holder. Also compatible with Fine Pin Vise D (Item 74050) and D-R (Item 74112).
• Simply hold at a 45- to 60-degree angle and pull lightly across the surface to score it. Repeat as necessary to achieve a clearly-defined result.
• Comes in a case that can hold up to ten blades.
• A color-coded marking on the shank allows easy identification of blade thickness.

Warning! Not suitable for children under 14 years.

Article number: 300074145 Product: Fine Engraving Blade 0.15mm

Engraving to emphasize details such as panel lines, or even add custom detail is a popular advanced modeling method. Tamiya makes this advanced modeling technique easy with its line-up of engraving blades. These fine engraving blades are made from tungsten carbide, and offer a smooth, consistent finish. They are available in a choice of 5 thicknesses to meet your modeling needs.

• 0.15mm Fine Engraving Blade x1
• Total length: 25mm. Shank diameter: 2mm.
• Recommended for use with dedicated holder: Item 74139 Engraving Blade Holder. Also compatible with Fine Pin Vise D (Item 74050) and D-R (Item 74112). • Simply hold at a 45- to 60-degree angle and pull lightly across the surface to score it. Repeat as necessary to achieve a clearly-defined result.
• Comes in a case that can hold up to ten blades.
• A color-coded marking on the shank allows easy identification of blade thickness

Warning! Not suitable for children under 14 years.

Article number: 300074144 Product: Side Cutter α Purple

This is a cutting mat used for working on small projects where the use of a cutting blade is needed. It will protect table surfaces from unwanted cuts and nicks.

• Dimensions: 145mm x 450mm x 2mm thickness.
• Made from semi-transparent blue-green resin with virtually zero odor.
• 3-ply mat features an internal hard layer sandwiched by softer outer layers, increasing knife blade longevity while leaving minimal cut marks.
• Markings printed on the front side include: useful grids, increment angles, and curved and circular markings. It also features a scale ruler for easy switching between 1/1, 1/24, 1/35 and 1/48, plus handy markings to aid in the cutting out of thin masking tape strips.

Warning! Not suitable for children under 14 years.

Article number: 300074143 Product: Modeling Flat Chisel Blade 2mm

• Material: High-Speed Steel
• Length: 25mm, blade width: 2mm, diameter: 2mm.
• A handy case is included for storage of the blade when not in use.
• Thicker protrusions should be filed down first, and this blade used for their final removal.
• Compatible with Item 74139 (recommended) and Item 74112

Warning! Not suitable for children under 14 years.

Article number: 300074142 Product: Cutting Mat α (A5/Blue)

This is a new size of cutting mat in the same easy-use, odorless material as Item 74142 (A5 size) and Item 74144 (A3 half-size). A4 is a happy medium of compactness and workspace, and this mat has an array of useful markings to help with your model making activities!

• Dimensions: 220mm x 300mm x 2mm thickness. The surface area slightly exceeds A4 in length and width.
• Made from semi-transparent blue-green resin with virtually zero odor.
• 3-ply mat features an internal hard layer sandwiched by softer outer layers, increasing knife blade longevity while leaving minimal cut marks.
• Markings printed on the front side include: useful grids, increment angles, and curved and circular markings.
• Features a scale ruler for easy switching between 1/1, 1/24, 1/32, 1/35 and 1/48, plus handy markings to aid in the cutting out of thin masking tape strips.
• Reverse side is left plain.

Warning! Not suitable for children under 14 years.

Article number: 300074140 Product: Fine Pivot Bit1.1mm Shank1.5mm

Fine pivot drill bits allow the drilling of very precise holes. Pivot drill bits have bits which are thinner than their shank, for greater resistance against shattering and decreased deviation. These bits complement existing 0.2-0.5mm (Items 74113-74116), 0.6-0.7mm (Items 74127-74128) and 0.8-1.0mm (Items 74132-74134) bits.
 

•Durable material is shatter-resistant and is marked with bit size for easy recognition.
•High-quality bit finish gives excellent hole quality.
•Can be used on a range of materials including plastic, metal, brass and wood.
•Each size comes with a plastic storage case.
•Compatible with 74050 Pin Vise D and 74112 Pin Vise D-R.

Warning! Not suitable for children under 14 years.

Article number: 300074139 Product: Engraving Blade Holder

This is a lightweight, ergonomically designed holder for Tamiya’s line-up of Fine Engraving Blades. (Items 74135-38)
 

Warning! Not suitable for children under 14 years.

Article number: 300074138 Product: Fine Engraving Blade 0.5mm

Engraving to emphasize details such as panel lines, or even add custom detail is a popular advanced modeling method. Tamiya makes this advanced modeling technique easy with its line-up of engraving blades. These fine engraving blades are made from tungsten carbide, and offer a smooth, consistent finish. They are available in a choice of 4 thicknesses to meet your modeling needs.
 

Warning! Not suitable for children under 14 years.

Article number: 300074137 Product: Fine Engraving Blade 0.3mm

Engraving to emphasize details such as panel lines, or even add custom detail is a popular advanced modeling method. Tamiya makes this advanced modeling technique easy with its line-up of engraving blades. These fine engraving blades are made from tungsten carbide, and offer a smooth, consistent finish. They are available in a choice of 4 thicknesses to meet your modeling needs.
 

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300074135 Product: Fine Engraving Blade 0.1mm

Engraving to emphasize details such as panel lines, or even add custom detail is a popular advanced modeling method. Tamiya makes this advanced modeling technique easy with its line-up of engraving blades. These fine engraving blades are made from tungsten carbide, and offer a smooth, consistent finish. They are available in a choice of 4 thicknesses to meet your modeling needs.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300074124
Product: Plastic & Soft Metal Scissors

These versatile scissors are a must-have addition to every modeler's tool kit - not only can the high-quality blades cut through plastic such as the polycarbonate used on many Tamiya R/C model bodies, they can also handle softer metals and other materials/thicknesses above and beyond the capabilities of standard scissors.

Length: 170mm; blade length: 40mm.
Blade material: anti-rust treated stainless steel.
Features a stylish navy blue grip. Suitable material thicknesses that may be cut: Note: materials and thicknesses are intended as a guideline only.
Tamiya Pla-plate: up to 1.2mm
Tamiya Clear Pla-plate: up to 0.5mm
Polycarbonate: up to 1.0mm
Other plastics: up to 1.0mm
Aluminum: up to 0.5mm
Copper/Brass/Nickel: up to 0.3mm
Leather: up to 2.0mm
Paper: up to 2.0mm
Cardboard/Rubber sheeting: up to 5.0mm

Warning! Not suitable for children under 14 years.

Article number: 300074123
Product: SP Side Cutter (Slim Jaw)

This tool is designed to remove scale model plastic parts from the parts sprue. The sharp jaw blades offer an excellent cutting edge, and they have a slightly slimmer jaw than previous Tamiya plastic cutter products, enabling easier removal of smaller parts which have less clearance.

•Length: 115mm.
•Easy-to-use tool features slim jaw with an excellent balance of durability and cutting edge.
•PVC grip covers ensure that the side cutters stay firmly in your hand during use.
•The tool is marked with the twin star logo and TAMIYA CRAFT TOOLS FOR PLASTIC

Warning! Not suitable for children under 14 years.

Article number: 300074118
Product: Tamiya Cutting Mat DIN-A4, Green

Every modeler needs a suitable surface upon which to create their masterpieces, and now Tamiya offers a great solution. This green version of the popular Tamiya Cutting Mat Beige (Item 74056; please note new name) offers excellent visibility of a wide range of colors of plastic part, and at just larger than A4 is a handy size.

About the Item
• 3-ply material with a harder core sandwiched by softer outer layers. Surface is easy on your knife blade but does not sustain cut marks easily.
• Features one unmarked side and one side with a range of markings including 1cm grid, 1mm interval ruler, curves and circles.
• Mat is made of dark green material.

Warning! Not suitable for children under 14 years.

Article number: 300074117
Product: Craft Tools Bending Tweezers PE Parts

Unlike standard tweezers, these have been designed specifically for the job of picking up and bending the very fine parts found in photo etched parts sets. With a number of photo etched parts sets now available in the Tamiya line-up, and some kits even including them right out of the box, these tweezers will be a fine addition to any modeler’s toolbox.

Designed for precision bending of brass or nickel silver photo-etched parts.
The tips of the tweezers have been made as thin as possible to suit this tool to the task.
Can be used to bend parts along fold lines of up to 10mm in length.
Made from stainless steel. Length: 100mm

Warning! Not suitable for children under 14 years.

Article number: 300074113 Product: Fine Pivot Bit 0.2mm Shank 1mm

This fine pivot drill bit allows the drilling of precise holes. Pivot drill bits have bits which are thinner than their shank, and they provide greater resistance against shattering while offering decreased deviation.

• Durable material is shatter-resistant.
• High-quality bit finish delivers excellent results.
• Compatible with 74050 Pin Vise D, 74051 Pin Vise S and 74112 Pin Vise D-R.

Warning! Not suitable for children under 14 years.

Article number: 300074112 Product: Fine Pin Vise D-R (0.1-3.2mm)

The pin vise is an important tool in the armory of any modeler, allowing the making of precision holes for the purpose of modifying scale models.

- Compatible with drill bits of sizes from 0.1-3.2mm. 
- Rotating grip end features built-in ball bearings for smooth movement. 
- Made from nickel-plated brass, with elastomer grip. 
- Features metallic sticker with the Tamiya twin star logo and wording "PIN VISE". 
- The rubber grip is engraved with the wording "TAMIYA".
 

Warning! Not suitable for children under 14 years.

Article number: 300074111 Product: Handy Craft Saw II

This handy tool is perfect for modifying plastic models or Mini 4WD machines, as well as woodcraft. Its blades are slightly thicker than Item 74018 Mini Razor Saw and therefore less prone to distortion or warping. The item includes 2 blades of different width, and features fine teeth which enable it to cut through a variety of materials while leaving a smooth finish. The 2 blades can be inserted into the included plastic grip, which features the Tamiya logo and "TAMIYA CRAFT TOOLS" in printed lettering.

About the Item
• Includes wide carbon steel blade x1 and slim carbon steel blade x1
• Both blades are of .35 mm thickness.
• Wide blade length: 46 mm
• Slim blade length: 43 mm
 

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Warning! Not suitable for children under 14 years.

Article number: 300074105
Product: Fine Craft Saw blade III 0,15mm thick

In some situations, the cut made by a normal modeling saw may be too wide, leading to unwanted changes to the length of the part. This set of saws solves this problem as they are made from 0.15mm thick etched metal. The grips of the saws can be folded over and attached to a Modeler's Knife (Item 74040) for precise cutting control. The set includes four types of saw blades which can be used for a variety of situations.

Warning! Not suitable for children under 14 years.

Article number: 300074104 Product: Basic File Set (Smooth Double-Cut)

This handy file set contains 3 double-cut files with black rubber grips which provide a smooth finish desired on plastic scale models, Mini 4WD models and even metal surfaces. The files can be stored in the accompanying vinyl case to keep them safe from damage.

- 3 types of file: round, semi-circular, and flat. 
- Length: 140mm
- Handle diameter: 2.5mm
- 38 cuts/cm 

Warning! Not suitable for children under 14 years.

Article number: 300074103
Product: Tamiya HG RevAction straight Tweezers

Compared to standard tweezers, the operation mechanism for these tweezers is reversed: squeeze the handle to open and release to close. As such, these tweezers can be easily wielded while they are holding objects, thereby greatly reducing hand fatigue. The straight tip makes for simple operation. Tweezers are made from stainless steel and feature vulcanized fiber grips.

Warning! Not suitable for children under 14 years.

Article number: 300074102
Product: Tamiya HG RevAction Angled Tweezers

Compared to standard tweezers, the operation mechanism for these tweezers is reversed: squeeze the handle to open and release to close. As such, these tweezers can be easily wielded while they are holding objects, thereby greatly reducing hand fatigue. The angled tip also enables access to tight spaces. Tweezers are made from stainless steel and feature vulcanized fiber grips.

Warning! Not suitable for children under 14 years.

Article number: 300074101 Product: Tamiya Modeler´s Blade Pro chisel (10)

- Chisel blade x 10pcs.
- 0.55mm thick.
- Suitable for chiseling, engraving, and removing protrusions from flat surfaces.

Warning! Not suitable for children under 14 years.

Article number: 300075100 Product: Tamiya Modeler´s Blade Pro curved (3)

- Curved blade x 3pcs.
- 0,45 mm thick.
- Suiteable for cutting soft fabric such as film, Cloth, and Japanese paper.

Warning! Not suitable for children under 14 years.

Article number: 300074099
Product: Tamiya Modeler´s Blade Pro straight (5)



Straight Blade x5 Pcs.
0.5mm thick
Suitable for very precise and detailed work.

Warning! Not suitable for children under 14 years.

Article number: 300074098
Product: Tamiya Modeler's Knife Pro reinf. Handle

This professional knife is ideal for precision tasks. Set includes Straight blade (3pcs.), Curved blade (2pcs.), and Chisel blade (2pcs.). The body features an elastomer grip and a metal chuck to secure the blade. Protective cap for the knife and a plastic spare blade case are also included.

Warning! Not suitable for children under 14 years.

Article number: 300074097
Product: Tamiya Fin.CraftSaw PE-Blade 0,1mm (2x3)

These scribing saws are ideal for remaking details that are lost when cleaning up seam lines or deepening existing panel lines. Compared with Item 74094, the teeth of these saws are smaller and have a finer pitch. Both straight and rounded saw blades are included. The grips can be folded over for the saws to be used as they are, and they may also be attached to a Modeler's Knife (Item 74040). Made from 0.1mm thick stainless steel.

Warning! Not suitable for children under 14 years.

Article number: 300074094
Product: Tamiya PhotoEtched 0,1mm Saw Blade (5)

This set of thin craft saws is made from photo-etched metal to enable extremely fine cuts. The blades feature grips which can be folded 011er to increase support and this feature also allows them to be fitted onto the Modeler's Knife's handle for greater ease of use.

Warning! Not suitable for children under 14 years.

Article number: 300074093
Product: Tamiya Modelers Side Cutter Gray/Plastic

This Modeler's Side Cutter is designed for use with plastic parts and is ideal for scale models and Mini 4WD products assembly. The cutter's blades are made with hardened carbon steel and will remain sharp for a long period of time.

Warning! Not suitable for children under 14 years.

Article number: 300074092
Product: Mag Visor w/Lenses 1,7/2/2,5x

The Magnifying Visor enables you to view an enlarged, wide viewing area for detailed modeling or even reading a book. The head-mounted magnifying visor can easily be worn like a pair of glasses and frees up your hands to work on plastic models and crafts.

Warning! Not suitable for children under 14 years.

Article number: 300074091
Product: Plastic Scriber II

This tool is perfect for tasks such as scoring and cutting plastic sheets, creating mold lines on model parts, and modifying Mini 4WD machines. The blade can be retracted after use and two spare blades are also stored inside the handle.

Warning! Not suitable for children under 14 years.

Article number: 300074086
Product: Tamiya Modeling Drill Chuck

This modeling drill chuck handle comes in very handy in times where a normal pin vise does not have what it takes to do the job and where an electric drill is too powerful.

About the Item

Comes with a easy gripping blue handle.
The chuck is compatible with 1.5-6.5mm drill bits.

Warning! Not suitable for children under 14 years.