JavaScript appears to be disabled in your browser.
You must enable JavaScript in your browser to take advantage of all the features in this website.
Warning! Not suitable for children under 14 years.
Article number: 300089984 Product: Engraving Blade Holder Red This is a color variation of the Engraving Blade Holder (original: Item 74139), with the handle in a vivid red. It can be used with the wide range of Tamiya Fine Engraving Blades and Needle. Item Contents/Information • Engraving Blade Holder (Red) x1 • Length: 126mm, diameter: 6mm. • Made from lightweight, durable aluminum, with a knurled grip section for error-free crafting. The chuck is made of nickel-plated brass. • The holder’s slimline form allows it to be held like a pen. It is marked with the twin star logo and the words TAMIYA CRAFT TOOLS. • Blade insertion and removal is simple – just lightly pinch the chuck and rotate the handle. • Comes with a protective cap that also stops the holder from rolling away. • Compatible with Fine Engraving Blades (Items 74135-38, 74145), Needle (Item 74148) and Design Knife Blades (Item 74074).
Article number: 300087202 Product: 40ml Square Bottle Holder Cement or other modeling aids accidentally spilling across your workbench could spell danger for your model and other materials – reduce the risk of accidents with this simple sponge holder, which is designed to fit snugly around the 40ml square bottles used for Tamiya Cement and other products, limiting the chance of their falling over if knocked. Item Contents/Information • Bottle Holder x1 • Use the included tab to link multiple holders together. • Material: PE sponge • Dimensions: 80mm x 80mm x 12mm
Article number: 300084175 Product: M 4 x 11,5mm Step Screw/King Pin (5) Compatible with the following R/C machines: Item 57787 Fiat 500 Item 57797 Team Repsol Mitsubishi Ralliart Racing LANCER Item 58301 Baja King Item 58396 DualHunter Item 58399 Plasma Edge
Article number: 300074563 Product: SW Advance & SX 0.3D ★This high quality air compressor is compatible with the range of Tamiya airbrushes. ★Dial allows easy adjustment of air pressure, for a range of jobs from large areas to fine detail such as camouflage schemes. ★Airbrush hanger works with sensor switch, turning on the compressor when the airbrush is removed, and off when the airbrush is replaced again. ★Comes with the SX 0.3D airbrush. Specifications ★Dimensions: 12.5 x 7.0 x 11.5cm (depth: 10cm including hanger) ★Maximum output pressure: approx. 0.20MPa (30PSI) ★Continuous pressure: 0.08MPa (12PSI) ★Air output: 10 liters/min. ★Power consumption: 24W ★Noise level: 45db ★Weight: 0.6kg (not including cables and other accessories) ★AC adapter and coiled hose included.
Article number: 300074156 Product: Modeling Template Square 1-10 Tamiya's engraving needle is a fine addition to any modeler's tool kit, allowing scribing of fine, precision lines. Now, you can use it to scribe squares with ease thanks to this new set of photo-etched stainless steel template sheets, which follows on from the round and rounded rectangle templates in Item 74150 and 74154 respectively. Item Contents/Information • Photo-Etched Template Fret x1 • The fret includes 4 sheets, each with square templates in 0.5mm length increments between 1mm and 10mm. Every sheet has a different corner style for its squares: right angle, R10%, R15% and R20%. The radius of rounded corners is calculated by multiplying square side length by R (10mm square x R10% = 1mm radius corners). • Templates are manufactured in 0.1mm thickness stainless steel, allowing you to bend it against convex surfaces such as aircraft fuselage pieces (minimum target component radius is 30mm)
Article number: 300069935 Product: Hex Screwdriver Bit Ball 2.5mm Add another facet to your toolbox with this ball end screwdriver hex bit, which can be used to adjust hex head screws from off-center angles, thereby saving the time and hassle of removing other parts to get at the screw. • 2.5mm Ball End Hex Wrench Bit x1 • Machine-crafted in chromium molybdemum vanadium steel for a precision design that minimizes the potential for screw head damage. The bit is magnetic. • For use on 2.5mm hex head screws. • Can be used at angles up to 20 degrees from the perpendicular. • Bit size: 2.5mm hex, 100mm length. • Compatible with the Ratcheting Screwdriver PRO in Item 74152, and electric screwdrivers that can take 6.35mm shank bits.
Article number: 300069934 Product: Box Wrench Bit 7mm This is a box wrench bit for use with 7mm hex bolts and nuts. It is compatible with the recently-announced Ratcheting Screwdriver PRO in Item 74152. Item Information/Contents • Box Wrench Bit (7mm) x1 • Bit size: 7x75mm • Chromium-vanadium steel is crafted via cold forging for exacting results. • Compatible with Item 74152, and electric screwdrivers that can use 6.35mm hex shank bits.
Article number: 300069927 Product: SW Advance & SX 0.5D ★This high quality air compressor is compatible with the range of Tamiya airbrushes. ★Dial allows easy adjustment of air pressure, for a range of jobs from large areas to fine detail such as camouflage schemes. ★Airbrush hanger works with sensor switch, turning on the compressor when the airbrush is removed, and off when the airbrush is replaced again. ★Export version includes plugs for the adapter allowing use in a range of countries. ★Comes with the SX 0.5D airbrush. Compressor Specifications ★Dimensions: 12.5 x 7.0 x 11.5cm (depth: 10cm including hanger) ★Maximum output pressure: approx. 0.20MPa (30PSI) ★Continuous pressure: 0.08MPa (12PSI) ★Air output: 10 liters/min. ★Power consumption: 24W ★Noise level: 45db ★Weight: 0.6kg (not including cables and other accessories) ★AC adapter and coiled hose included.
Article number: 300064425 Product: 2019 Tamiya Catalog 4 lang. - languages: German / English / French / Spanish From plastic models and radio-controlled cars to instructive kits, TAMIYA is once again demonstrating its diversity in model building in this catalogue. A must over 88 pages for every ambitious model builder!
Article number: 300056557 Product: Hub Nuts for Dual Whl Bla *2 Give your super-realistic Tamiya 1/14 R/C dual rear wheel truck a further layer of detail with these hub nuts, which have been designed to look just those on the full size vehicles! Item Contents/Information • Inner Nut x2 • Outer Cover x2 • These parts can be used in place of kit-standard 4mm flanged nuts. • These parts can be used in place of kit-standard 4mm flanged nuts. • Small parts for attachment are also included. • Compatible with 1/14 scale R/C truck dual rear wheels.
Article number: 300056556 Product: Hub Nuts for Single Whl Bla *2 Give your super-realistic Tamiya 1/14 R/C truck a further layer of detail with these hub nuts, which have been designed to look just those on the full size vehicles! Item Contents/Information • Hub Nut A x2 • Hub Nut B x2 These parts can be used in place of kit-standard 4mm flanged nuts. • Small parts for attachment are also included. • Compatible with 1/14 scale R/C truck front wheels and single rear wheels.
Article number: 300054951 Product: SW-01 Reinforced C Parts (Joints) These reinforced C parts for the SW-01 chassis are more durable than kit-standard components and offer exemplary fit. Item Contents/Information • SW-01 Reinforced C Parts x1 • Dog-bone Shafts x2 • 3mm Grub Screws x2 • This sprue includes suspension arm, joint components and more. • Compatible with SW-01 chassis models.
Article number: 300054950 Product: SW-01 Rein. B Parts (Bumper) These reinforced B parts for the SW-01 chassis are more durable than kit-standard components and offer exemplary fit. Item Contents/Information • SW-01 Reinforced B Parts x1 • This sprue includes bumper components and more. • Compatible with SW-01 chassis models.
Article number: 300054946 Product: MudMad Clear Body This is an unpainted version of the body parts for the MudMad (Item 57412). If you damaged your body with crazy wheelie driving, or just fancy an alternative paint job to the pre-painted kit version, this is the product for you! Set Contents/Information • The MudMad form is molded in lightweight and durable 0.8mm thickness polycarbonate. • Includes stickers to decorate the body, and masking stickers for use in the painting process. • Compatible with SW-01 chassis models.
Article number: 300054943 Product: TRF420 SusArm Bushing A-C *2 The brand new suspension arm designs in the TRF420 chassis use aluminum bushing inserts to allow quick, minute adjustment of damper attachment position and leverage ratio (i.e. the angle of the damper). Now, Tamiya is releasing the A-C bushings as Hop-Up Options so you can fine-tune your suspension just how you want it. Attachment only requires removal of ball connector and grub screw, saving you valuable time. Item Contents/Information • TRF420 Suspension Arm Bushings A-C x2 • Change the insertion direction of the bushing for two different settings (A or C) • Precision aluminum components have the stylish Tamiya Blue anodized finish.
Article number: 300054942 Product: TRF420 SusArm Bushing B *2 The brand new suspension arm designs in the TRF420 chassis use aluminum bushing inserts to allow quick, minute adjustment of damper attachment position and leverage ratio (i.e. the angle of the damper). Now, Tamiya is releasing the B bushings as a Hop-Up Option. Attachment only requires removal of ball connector and grub screw, saving you valuable time. Contents/Information • TRF420 Suspension Arm Bushings B x2 • Precision aluminum components have the stylish Tamiya Blue anodized finish.
Article number: 300054941 Product: CB Alu Transponder Stay ★This stay is for attachment of a transponder when racing. ★It also acts as a counterweight to the motor, ensuring exemplary left/right balance and less tendency to overturn. ★Crafted in lightweight, rigid aluminum, this component features a stylish blue anodized finish.
Article number: 300054940 Product: Brass Adjustable SepSusMt (E) ★Brass components are weightier than aluminum counterparts, giving different ride characteristics. ★Change plastic bushings to fine-tune toe, roll center and skid angle. Compatible Chassis TA07 MS, TA07 PRO, TB Evo.6, TB Evo.6 MS, TB-05 PRO, TRF419, TRF419X, TRF419XR & TRF420 Chassis
Article number: 300054939 Product: Brass Adjustable SepSusMt (A) ★Brass components are weightier than aluminum counterparts, giving different ride characteristics. ★Change plastic bushings to fine-tune toe, roll center and skid angle. Compatible Chassis TA07 MS, TA07 PRO, TB Evo.6, TB Evo.6 MS, TB-05 PRO, TRF419, TRF419X, TRF419XR & TRF420 Chassis
Article number: 300054938 Product: Brass Adjustable SepSusMt (XB) ★Brass components are weightier than aluminum counterparts, giving different ride characteristics. ★Change plastic bushings to fine-tune toe, roll center and skid angle. Compatible Chassis TA07 MS, TA07 PRO, TB Evo.6, TB Evo.6 MS, TB-05 PRO, TRF419, TRF419X, TRF419XR & TRF420 Chassis
Article number: 300054937 Product: Brass Adjustable SusMt (E) ★Brass components are weightier than aluminum counterparts, giving different ride characteristics. ★Change plastic bushings to fine-tune toe, roll center and skid angle. Compatible Chassis TA07 MS, TA07 PRO, TB Evo.6, TB Evo.6 MS, TB-05 PRO, TRF419, TRF419X, TRF419XR & TRF420 Chassis
Article number: 300054936 Product: Brass Adjustable SusMt (A) ★Brass components are weightier than aluminum counterparts, giving different ride characteristics. ★Change plastic bushings to fine-tune toe, roll center and skid angle. Compatible Chassis TA07 MS, TA07 PRO, TB Evo.6, TB Evo.6 MS, TB-05 PRO, TRF419, TRF419X, TRF419XR & TRF420 Chassis
Article number: 300054935 Product: Brass Adjustable SusMt (XB) ★Brass components are weightier than aluminum counterparts, giving different ride characteristics. ★Change plastic bushings to fine-tune toe, roll center and skid angle. Compatible Chassis TA07 MS, TA07 PRO, TB Evo.6, TB Evo.6 MS, TB-05 PRO, TRF419, TRF419X, TRF419XR & TRF420 Chassis
Article number: 300054934 Product: TRF420 Steel F Direct Cups *2 ★Crafted in durable steel, these front direct cups will stand up better to impacts, and also provide more weight toward the front of your car. ★Each cup weighs 8 grams, double the kit-standard aluminum part. ★Swing shaft caps are also included. Compatible Chassis TA07 MS*1, TA07 PRO*1, TRF419*1, TRF419X*1, TRF419XR*1 & TRF420 Chassis
Article number: 300054931 Product: T3-01 Front Fork Spacer Set ★When installed in the front fork, these spacers smooth its motion. ★Parts are also included for use on the front stem to act as steering dampers, further enhance this set's efficacy and even let you tweak the steering feel. ★Recommended for use with the springs in Item 54839. ★Includes four each of 1mm and 0.5mm spacers, plus sponge tape, grease and more.
Article number: 300054930 Product: SW-01 G Parts (Gears) Yellow ★These gears are molded in a vivid yellow shade of low-friction POM plastic. ★They are perfect for use with Item 54920 to show off the workings of the gear-driven SW-01. ★Two G parts sprues are included.
Article number: 300054929 Product: CC-02 SS Adjust Tie-Rod Set This set is for use with our brand new CC-02 chassis kit. When fitted in place of the rigid molded plastic link in the kit as standard, the durable stainless steel turnbuckle shafts allow adjustment of toe angle on the chassis to fine-tune performance. Set Contents/Information • 104mm Stainless Steel Tie-Rod x1 • 53mm Stainless Steel Tie-Rod x1 • Adjusters and small parts for attachment are also included. • Compatible with CC-02 chassis cars.
Article number: 300054887 Product: TRF420 Toe Control RearSus Set ★The parts in this set allow toe to vary as your car's suspension works, providing greater traction in corners for even faster times! ★As the suspension moves when the car corners, the toe also changes. ★Uprights, caster blocks and lower mounts are crafted in rigid aluminum, while upright arms are carbon fiber.
Article number: 300051648 Product: GD Gasket TRF420/419 TA07 *4 This gasket design, which is common to the TRF419, TA07 and new TRF420 gear differential units, is now to join the Tamiya Spare Parts line-up. Use them to replace worn parts in a timely manner, keeping your diffs at peak performance. Item Contents/Information • Gear Differential Gaskets x4 • Compatible with TRF420, TRF419 and TA07 chassis cars.
Article number: 300051647 Product: TRF420 Alu. F Direct Cups *2 These front direct cups, which were designed for the new TRF420 chassis, are now to join the Tamiya Spare Parts line-up. Use them to replace worn parts in a timely manner, to maintain peak drive efficiency. Item Contents/Information • TRF420 Aluminum Front Direct Cups x2 • Swing Shaft Cap Parts x1 • Lightweight and with a hard coating, these direct cups offer superb durability. • Compatible with TRF420 chassis cars or those using Item 51642 TRF420 Front Direct Pulley (37T).
Article number: 300051635 Product: VW Karmann Ghia Body Tamiya is delighted to announce the body parts from our Volkswagen Karmann Ghia kit (Item 58677) are also to go on sale as an individual item. Set Contents/Information • This is a 1/10 scale R/C body parts assembly kit. • The classic form of the car is accurately captured in lightweight and durable polycarbonate. • Separate plated parts depict side mirror, bumpers and light cases. • Includes marking stickers, and masking stickers for use during the paint job. • Requires a 239mm wheelbase.
Article number: 300047448 Product: Racing Wing Set 2 Hard This is a welcome re-issue for the limited edition reinforced version of Item 54494, which includes two different wing designs molded in 1mm polycarbonate (Item 54494 uses 0.7mm). Use them to fine-tune your car’s downforce to perfection! et Contents/Information • Curved Wing x1 • Straight Wing x1 • J Parts (Wing Stay) x1 • Small parts for attachment are also included.
Article number: 300047447 Product: On-Road Springs Hard White Fine-tune your dampers with the four varieties of spring in this set, which is a color variation of the springs in Item 53440 with all the springs in versatile white to give your suspension a fresh look! Set Contents/Information • Soft, Medium, Hard & Extra-Hard Springs x 2 each • Markings are applied to the end of each spring for identification purposes. • For information on compatibility with chassis, see Item 53440 on our homepage or the official Tamiya R/C Parts Matching List.
Article number: 300047444 Product: Mustang GT4 LW Body The body parts from our smash hit Ford Mustang GT4 R/C model (Item 58664) are also to go on sale as a lightweight body parts set. • The muscular form of the car is faithfully captured in lightweight yet durable 0.8mm thickness polycarbonate. • Separately molded plated parts are included to depict rear wing and side mirrors. • Comes with stickers to recreate markings, plus masking stickers for use when painting. • Compatible with 257mm wheelbase 1/10 R/C touring cars.
