Spare & Option Parts

Art.Nr.: 300054158
Art.bezeichnung: F104 Alu. Diff Housing Set

The new Aluminum Diff. Housing Set is made of blue anodized aluminum which helpsprovide a smoother moving action and also looks great as a dress up part. When attached to your F104 machine, it makes maintenance a breeze as it does not come apart when you take off your wheels.


Can be used with F104 & F103 series chassis machines. (For use on the F103, item 54162 must be purchased as the axle needs to be shorter for item 54158 to work at all)

Article number: 300054155
Product: DB-01 3mm Thin Alum.Lock Nut (5)Bl.an.

These Thin Aluminum Lock Nuts offer your machine extra weight savings and also look great.

•3mm Thin Aluminum Lock Nut X 5pcs.
•For general purpose use.

3mm Thin Alu.Lock Nut

Article number: 300054154
Product: F104/F103 Front Upright reinforced (2)

Use in place of kit supplied K-6 plastic part. Install with high-output motor or .04 module spur gear for optimum results.

Article number: 300054152
Product: Tamiya Air Remover

When assembling your dampers, this air remover offers you a faster way of drawing out the bubbles to help save you time. This item can be used for machines such as 1/8 Nitro that use long dampers.

Air remover X 1pc.
Pump x 1pc.
Sticker x 1pc.
Instruction manual x 1pc.

Article number: 300054145
Product: TB03 Urethane Front Bumper

This TB-03 EX Urethane bumper can be used with TRF416, TRF415, TB-03, and TB-Evo 5 chassis cars.

TB-03 EX Urethane Bumpe

Article number: 300054140
Product: DB-01/TRF501X Reinforc.Belt 369x3,7mm(1)

•The clean-type drive belt resists dust and maintains optimum drive efficiency.
•The drive belt core makes it approximately 1.5 times stronger than previous drive belts.
•While still providing flexibility and low drive resistance for improved performance.
•The belt has a very long life and the teeth do not slip as it has been reinforced.
•369 belt size, Width: 3.7mm.
•Can be used with any DB01 chassis and TRF501X WE and TRF511 machines.
•DB01 Reinforced Drive Belt x 1pc.

DB01 Reinforced Drive Belt

Article number: 300054139
Product: Touring Car Body Acc. Parts

This set includes parts to depict front/rear wipers, side mirros, muffler, intercooler and brake discs to dress up and detail your 1/10 RC touring car body.

Touring Car Body Acc.Parts

Article number: 300054121
Product: H.T. Servo Saver Alu. Horn Blue anodized

This is and aluminum servo saver horn which is finished in blue anodized color. When used, enhanced steering handling and response can be immediately felt when replacing the Hi torque Servo Saver Q5 part.

Aluminum horn x 1
May be used with chassis kits: TB-03, TA05, DB01, DF-03, TRF501X, TRF416, TRF415
Can be used with Spare Parts 50473 and 51000

Alu.Horn for HT Servo Save

Article number: 300054114
Product: CR-01 Crawler Motor CR-Tuned 35T

When rock crawling, it is very important to have a motor that provides the appropriate amount of torque required, to give you more control over the vehicle. Tamiya is releasing the CR-Tuned Motor (35T) to meet the needs of all Rock Crawlers.

About the Model

CR-Tuned Motor (35T) x 1
Can be used with every CR-01 chassis vehicle.
Can also be used with big tire trucks, touring cars, and M-chassis vehicles (Great for beginners)

CR-Tuned Motor 35T

Article number: 300054108
Product: CR01 Rein.D Shaft+Diff Lock

This highly durable Reinforced Drive Shaft & Diff Lock set securely locks in place to enable improved performance, allowing efficient power transmission.

Reinforced Drive Shaft Long 1pc.
Reinforced Drive Shaft Short 1pc.
Reinforced Diff Lock Housing A 1pc.
Reinforced Diff Lock Housing B 1pc.

*Can be used with every CR-01 Chassis.

CR01 Rein.D Shaft+Diff Lock

Article number. 300054107
Product: CR-01 Bent Lower Arm Rear

These aluminum lower arms are bent upwards to aid with clearing obstacles and will also adda visual highlight to your chassis

Bent Lower Arm (New design) x 2
Screws
Can be used with all CR-01 chassis vehicles.

CR-01 Bent Lower Arm Rea

Article number: 300054106
Product: CR-01 Bent Lower Arm Front

These aluminum lower arms are bent upwards to aid with clearing obstacles and will also adda visual highlight to your chassis

Bent Lower Arm (New design) x 2
Screws
Can be used with all CR-01 chassis vehicles.

CR-01 Bent Lower Arm Front

Article number: 300054090
Product: Alu.Servo Stay (R) TB-03

Aluminum construction provides stronger servo support. Reduced contact area with chassis also means better roll characteristics.

Alu.Servo Stay (R) TB-03

Article number: 300054085
Product: Barrel Spring Set Short

Short springs enable adjustment of ground clearance. Set includes two hard (blue), medium (yellow), and soft (red) springs.

Barrel Spring Set Short

Article number: 300054084
Product: Barrel Spring Set CR-01

Barrel springs offer efficient progressive damping effect. Set includes hard(blue), medium(yellow), and soft(red) springs (2 each).

Barrel Spring Set CR-01

Article number: 300054078
Product: Swing Shaft 44mm

Can be used for uprights with 1050 full ball bearing specifications. When the shafts are assembled, they enable a clean, smooth cornering as well as help in reducing speed loss. It is also possible to exchange these parts with those found in factory finished models, improving the cars performance.

Item Contents
•44mm Swing Shafts 2 pcs.

Can be used with the following chassis:
•TB-03, TA05, IFS-R: 53724, 51092 46mm Swing Shafts
•TRF416, TB Evo, 5MS: 54077, 54078 44mm Swing Shafts
•53500 Cross Joints for Assembly Universal Shaft Set

Swing Shaft 44mm

Article number: 300054077
Product: TRF416 44 mm Lighthweight Rear Swing Shaft

Can be used for uprights with 1050 full ball bearing specifications. When the shafts are assembled, they enable a clean, smooth cornering as well as help in reducing speed loss. It is also possible to exchange these parts with those found in factory finished models, improving the cars performance.

Item Contents
•44mm lightweight blue Wheel Axles 2 pcs.

Can be used with the following chassis:
•TB-03, TA05, IFS-R: 53724, 51092 46mm Swing Shafts
•TRF416, TB Evo, 5MS: 54077, 54078 44mm Swing Shafts
•53500 Cross Joints for Assembly Universal Shaft Set

Rear Swing Shaft 44mm LW

Article number: 300054075
Product: TB-03 F.C.Ball Head KingPin

The surface of the Ball Head King Pin has been coated with fluorine which provides an excellent smooth action with the ball connector, adjuster, flange pipe, and resin parts. Can be used with TB-03, TA05 IFS-R, TRF416, TB Evo 5MS chassis.

Item Contents
•5x9mm Ball connector (Metal plated)
•4.5x3.5mm Flange pipe (Metal plated)
•TB Evolution IV Flange pipe (Fluorine coated)
•TRF414X 3x0.7mm Spacer
•3x10mm Hex screw (Nickel plated) Strengthened

TB-03 F.C.Ball Head KingPin

Article number: 300054073
Product: TB-03 Sus.Mount 1E

Newly designed toe angles, and it is possible to assemble them upside down. Can be used with TB-03, TRF416, and TB Evo 5MS, and other chassis. Depending on the size, it maybe necessary to shave the interfering parts of the chassis.

TB-03 Sus.Mount 1E

Article number: 300054072
Product: TB-03 Sus.Mount 1C

Newly designed toe angles, and it is possible to assemble them upside down. Can be used with TB-03, TRF416, and TB Evo 5MS, and other chassis. Depending on the size, it maybe necessary to shave the interfering parts of the chassis.

TB-03 Sus.Mount 1D

Article number: 300054071
Product: TB-03 Sus.Mount 1C

Art.Nr.: 300054071
Artikelbezeichnung: TB-03 Sus.Mount 1C

★Make precision adjustments to toe angle and solidify sus arms with this rigid aluminum component. ★Attachment can be reversed if used with 3mm spacers.

Compatible Chassis
TA07 MS, TA07 PRO, TA06*1, TA06 PRO*1, TA06 MS*1, TA05 Ver.II*1, TB-03*1, TB-03 VDS, TB-04*1, TB-04 PRO*1, TB-05 PRO, FF-04 EVO, FF-03*1, FF-03 PRO*1, TRF419, TRF419X, TB Evo.7, TB Evo.6 and TB Evo.6 MS Chassis
*1 Use with Item 50994, 53709 or 54747.

TB-03 Sus.Mount 1C

Article number: 300054069
Product: TB-03 Sus.Mount 1A

★Make precision adjustments to toe angle and solidify sus arms with this rigid aluminum component. ★Attachment can be reversed if used with 3mm spacers.

Compatible Chassis
TA07 MS, TA07 PRO, TA06*1, TA06 PRO*1, TA06 MS*1, TA05 Ver.II*1, TB-03*1, TB-03 VDS, TB-04*1, TB-04 PRO*1, TB-05 PRO, FF-04 EVO, FF-03*1, FF-03 PRO*1, TRF419, TRF419X, TB Evo.7, TB Evo.6 and TB Evo.6 MS Chassis
*1 Use with Item 50994, 53709 or 54747.

TB-03 Sus.Mount 1A

Article number: 300054062
Product: DB-01/TRF501X Pinion Gear 13/14/15T 48DP

With the previous 48 Pitch Pinion gears it was possible to change your gear ratio to match the course layout and get the best out of your car, but it was only available in 16T, 17T, 18T, 19T, 20T, and 21T gears. But now this new Option Part includes the 13T, 14T, and 15T gears. It is possible to use this item with TRF501X and DB-01 chassis.
Item Contents

•Pinion Gear (13T, 14T, 15T) x 1
•3x3mm Grub screw x 3
•1.5mm Hex wrench x 1

Pinion 48 Pitch 13T 14T 15T

Article number: 300054060
Product: Carbon Damper Stay R TT-01E

This is a 3mm rear carbon damper stay for the TT-01E chassis. Also included is a damper stay mount x 1(54059), body mount mold x 1 (sp.984), 3x12mm metal screws, 5 ball connector nuts, and instruction manual.

TT-01E Carbon Damper Stay R

Article number: 300054058
Product: TT-01E Alum. Racing Steering

Features precision-made aluminum steering arm and ball bearings at axle attachment points for sharp response.

TT-01E Alu. Racing Steering

Article number: 300054055
Product: Module Spur Gear 96T TB03

Low noise, high efficiency spur gear allows more gear ratio setting possibilities.

Module Spur Gear 96T TB03

Article number: 300054048
Product: CR01 Reinforced Wheel Axle

Durable wheel axles replace set- supplied axles. They are less vulnerable to wear and increase reliability.

CR-01 Rein. Wheel Axle*2

Article number: 300054031
Product: Carbon Rein.F Parts TA05-IFS

These new hub carriers are made from carbon fiber-reinforced resin material for increased durability. Tougher hub carriers also mean sharper steering response, giving the car better handling characteristics.
*Compatible Chassis: TA05-IFS, TRF416

TA05-IFS Carbon Rein. F Parts

Article numbe: 300054025
Product: Ball Bearing Set TT-01E (20)

★Ball bearings are a great first step in tuning your car, minimizing power loss in the drivetrain and increasing durability. ★This set also includes components for use with steering posts, which give sharp response. ★Contains twelve 1150 and four each of 1280 and 850 ball bearings.

Compatible Chassis
TT-01 Type-E, TT-01 Type-ES & TT-01D Type-E Chassis

Warning! Not suitable for children under 14 years.

Article number: 300054023
Product: DB-01/TRF416 37T Front One-Way Pully

This new Option Part will give racers who use Tamiya's new belt-driven 4WD chassis another choice to customize their car's drivetrains. The pulley is now conveniently packaged on its own for fans who do not require the complete DB01 Front One-Way Set (ITEM 54017).
*Compatible Chassis: TRF501X, DB01, TRF416

Glow Starter w. Charge

Article number: 300054021
Product: 1:10 Chrome Mesh Wheel w/ Super Drift Tires

Super Driftech Tires come conveniently pre-mounted on stylish chrome-plated wheels. These tires are made from low-friction resin material, enabling effortless drifting and reducing tire wear.24mm width makes them compatible with any Tamiya touring car chassis as well.

POWER PACK 9,6V-750 MAH O.Z
)

Article number: 300054010
Product: RC LED Light (3mm diameter) - Blue

Tamiya has now expanded the line of LED lights for scale appearance to most polycarbonate RC car bodies. These new LEDs feature various colors and diameters, each item includes 2 LED bulbs and they will enable customers to create their own unique lighting designs. All of these LEDs are designed for use with, and can be effortlessly installed into, the TLU-01 Light Control Unit.

*These LEDs are designed for use with TLU-01 only and cannot be used with other items (1/14 R/C Tractor Trucks, etc.)

Passend für TLU-01

Article number: 300054009
Product: Tamiya LED Light red (3mm)

Tamiya has now expanded the line of LED lights for scale appearance to most polycarbonate RC car bodies. These new LEDs feature various colors and diameters, each item includes 2 LED bulbs and they will enable customers to create their own unique lighting designs. All of these LEDs are designed for use with, and can be effortlessly installed into, the TLU-01 Light Control Unit.

*These LEDs are designed for use with TLU-01 only and cannot be used with other items (MFC Units for 1/14 R/C Tractor Trucks, etc.)

Tamiya LED LIGHT?3 Red

Article number: 300054008
Product: Tamiya LED Light white (3mm)

Tamiya has now expanded the line of LED lights for scale appearance to most polycarbonate RC car bodies. These new LEDs feature various colors and diameters, each item includes 2 LED bulbs and they will enable customers to create their own unique lighting designs. All of these LEDs are designed for use with, and can be effortlessly installed into, the TLU-01 Light Control Unit.

*These LEDs are designed for use with TLU-01 only and cannot be used with other items (MFC units for 1/14 R/C Tractor Trucks, etc.)

Tamiya LED LIGHT?3 White

Article number: 300054000
Product: Damper Set Alum. M-Chassis 4X

Up to now, M-Chassis owners have had to make do with touring car aluminum dampers when up grading their cars. Tamiya has now developed this new set of 4 dampers specifically for the M-Chassis, featuring damper cylinders and damper rods that are 2mm shorter. As a result, the chassis' ride height is lowered and damper stroke can be more accurately customized. A hard black coating reduces friction and serves as a nice contrast to the blue damper caps and included white damper springs.
*Compatible Chassis: M-03, M-04, M-05 and M-06

M Chassis Alu.Damper-Set
4 pcs.

Article number: 300053989
Product: DB-01/TRF416 18 T Center Pully (2)

Install these new Option Parts to enhance the TRF501X drivetrain. The 37T Ball Diff. Pulley is made from slide molding and features integrated pulley flange to eliminate the risk of flange detachment. Flange design also includes a dirt discharge port to ensure smooth operation in off-road conditions. The 18T Center Pulley increases torque and can handle the output from the latest powerful motors. These pulleys are also designed to reduce belt jumping for consistent operation.

*Compatible Chassis: TRF501X

Center Pulley (18T)

Article number: 300053983
Product: Lightly-Tuned Motor 28T

This new electric motor is perfect for installing into M-03 & M-04 chassis to participate in official Tamiya races. It provides more torque than the normal RS-540 type motor, and can sustain its high performance for long durations. This motor is also compatible with touring car chassis and is a great upgrade for beginner drivers to let them gradually adjust to higher performance motors. May be used with ITEM 53581 Racing Motor Brush and ITEM 53486 Commutator Cleaning Brush Set.
*Compatible Chassis: M-03, M-04, all touring car chassis

Lightly-Tuned Motor 28T

Article number: 300053980
Product: DB-01 Dust Cover Ball Head&Adjuster(20)

This general use Option Part protects the connection joints between ball connectors and plastic adjusters in the suspension system to ensure long-lasting, smooth suspension operation. Compatible Chassis: Any

Dust Cover for Adjuste

Article number: 30003969
Product: DB-01 5x8mm Ball Head Connector (5)Steel

These general use connectors are made from tough high-strength steel to handle the rigors of off-road racing but can also be installed in on-road chassis. Compatible Chassis: Any

5x8mm H.H.H.B.Connector*5

Article number: 300053968
Product: DB-01 5x5mm Steel Hex Head Ball Con.(5)

These general use connectors are made from tough high-strength steel to handle the rigors of off-road racing but can also be installed in on-road chassis. Compatible Chassis: Any

5x5mm H.H.H.B.Connector*5

Article number: 300053965
Product: DB-01/TRF501X Pinion Gear 18/19T 48DP

★These pinion gears are for use with 48 pitch spur gears. ★Choose the right one to get your model perfectly setup for the track! ★Gear ratios (with 96T spur gear) = 12.00:1 (18T), 11.37:1 (19T).

Compatible Chassis
DB01, DB02, TRF502X & TRF503 Chassis

Warning! Not suitable for children under 14 years.

Article number: 300053958
Product: Ford F-350 Full Bearing Set

The powerful performance of the R/C High-Lift Chassis can be made more efficient by adding this Ball Bearing Set. Kit-supplied metal bearings (bushings) can all be replaced with precision ball bearings which minimize friction loss during power transmission.

Ford F-350 Full Bearing Set

Article number: 300053940
Product: DF-03 Hard Turnbuckle Shaft Set

Hard turnbuckle set for the DF-03 chassis. The set features four 3x50mm turnbuckle shafts for the camber links and two 3x46mm turnbuckle shafts for the steering.
* Compatible chassis: DF-03

DF-03 Hard Turnbuckle Shaft

Article number: 300053930
Product: Super Stock Motor "BZ" Off-Road

★This versatile motor features torque ideally suited to off-road cars. ★It utilizes brush damper, terminal heat sink, and chip condenser components. ★A sponge cover is included to protect the motor. ★The gun metal color can has slits to help heat dissipate. ★Features a blue anodized end bell. ★Input voltage: 7.2V ★RPM (without load): 26,500 ★Maximum torque: 49mN-m (7.2V) ★Use ball bearings when installing this motor. ★XV-01 series chassis will require motor extension cables.

Warning! Not suitable for children under 14 years.

Article number: 300053929
Product: Electric Motor Dirt-Tuned 27T

Lightly tuned motor designed for use in off-road racing and for Tamiya official grand prix races. Worn-out brushes can be replaced to maintain optimum performance.

About the Motor

Features chip type noise reduction condenser and heat-sink type end bell for effective heat dissipation
Compatible with: Tamiya electric off-road cars

Dirt-Tuned Motor (27T)

Article number: 300053928
Product: Short Reversible Sus. Arm

*Compatible chassis: TB Evo.5 TB Evo.4, TB Evo.4MS, TRF415MSX, TRF415MS and other chassis capable of using Reversible Suspension Arm. (Depending on type of suspension block, swing shaft may have to be changed from 46mm to 42mm length.

Short Reversible Sus. Arm

Article number: 300053927
Product: DF-03 Damper Spring Set. Set (3x4)s/m/h

Optional damper springs for use with Dark Impact (DF-03)
*Compatible chassis: DF-03

DF-03 Setting Spring Set

Article number: 300053926
Product: DF-03 Alum. Oil Damper Set (4)

Optional part for Dark Impact (DF-03). Replace standard dampers with these oil dampers for improved handling.
*Compatible chassis: DF-03

DF-03 Aluminum Damper Set

Article number: 300053925
Product: DF-03Ra Slipper Set

Optional part for Dark Impact (DF-03), slipper clutch is indispensable item for racing buggies. Specially designed slipper clutch protects your R/C cars drive shaft, clutch and engine from the rigors of off-road running and jumping. Includes new 82T spur gear which can be combined with Items 53922 and 53923 R/C 05 Pinion Gears for increased gear ratio setting choices.
*Compatible chassis: DF-03

DF-03 Slipper Clutch Set

Article number: 300053924
Product: DF-03Ra Heat Sink Bar (3)

Option part for Dark Impact (DF-03 chassis). Stylish blue anodized aluminum gearbox plate features 3 heat sink bars to increase heat dissipation effect. Heat sink effect may be adjusted by removing one or more heat sink bars.
*Compatible chassis: DF-03

DF-03 Heat Sink Bar Set

Article number: 300053922
Product: DF-03 Pinion Gear 23/25 T Steel M0.5

★These steel 05 module pinion gears offer long-lasting, efficient drive.
★Grub screws and hex wrench are also included.

Compatible Chassis
DF-03 Chassis

05 Pinion Gear (23T,25T)

Article number: 300053918
Product: TRF Damper L.Friction V Part (2)

Designed for the TA05 chassis as well as any of Tamiya's current touring cars that use TRF Low Friction dampers. These parts incorporate molybdenum compound for increased durability and smooth, low friction movement.
*Compatible items: ITEM 53571 TRF Damper (Fluorine Coated), ITEM 53901 TRF Special Damper (F103GT)

TRF Damper L.Friction V Part*2

Article number: 300053917
Product: 2.6mm Titan Coated Sus. Shaft

Steel suspension shafts feature titanium coating to prevent friction damage, ensuring continued smooth suspension movement. Stylish gold coloring.
*Compatible chassis: TRF415MSX, TB Evolution IV, and other chassis equipped with reversible suspension

?2.6mm Titan Coated Sus. Shaft

Article number: 300053913
Product: Frog 2005 Alu. Wheel-Adapter

Use this hexagonal wheel adapter to allow ITEM 58354 1/10 R/C The Frog and other rereleased buggies to use separately available off-road tires and wheels.

About the Model

•1 set sufficient for 1 R/C car.
•Includes: aluminum wheel adapter x 2, 4mm flange lock nut x 2, 2x10 stainless shaft x 2


*Compatible chassis: 58354 The Frog (2005), 58346 Hornet (2004), 58346 Grasshopper (2005), 57746 XB Grasshopper, 57741 XB Hornet

Frog 2005 Alu. Wheel-Adapte

Article number: 300053912
Product: Tamiya LED Light orange 3mm für TLU-01

Tamiya has now expanded the line of LED lights for scale appearance to most polycarbonate RC car bodies. These new LEDs feature various colors and diameters, each item includes 2 LED bulbs and they will enable customers to create their own unique lighting designs. All of these LEDs are designed for use with, and can be effortlessly installed into, the TLU-01 Light Control Unit.

Package includes 2 LED. Lights with 16" leads.

*These LEDs are designed for use with TLU-01 only and cannot be used with other items (1/14 R/C Tractor Trucks, etc.)

Tamiya LED Light 3mm Orange

Article number: 300053911
Product: Tamiya LED Light red

Tamiya has now expanded the line of LED lights for scale appearance to most polycarbonate RC car bodies. These new LEDs feature various colors and diameters, each item includes 2 LED bulbs and they will enable customers to create their own unique lighting designs. All of these LEDs are designed for use with, and can be effortlessly installed into, the TLU-01 Light Control Unit.

Package includes 2 LED. Lights with 16" leads.

*These LEDs are designed for use with TLU-01 only and cannot be used with other items (1/14 R/C Tractor Trucks, etc.)

Tamiya LED Light?5 Red

Article number: 300053910
Product: Tamiya LED Light white 5mm for TLU-01

Tamiya has now expanded the line of LED lights for scale appearance to most polycarbonate RC car bodies. These new LEDs feature various colors and diameters, each item includes 2 LED bulbs and they will enable customers to create their own unique lighting designs. All of these LEDs are designed for use with, and can be effortlessly installed into, the TLU-01 Light Control Unit.

includes 2 LED. Lights with 16" leads

*These LEDs are designed for use with TLU-01 only and cannot be used with other items (1/14 R/C Tractor Trucks, etc.)

Tamiya LED Light 5mm White

Article number: 300053908
Product: Frog(2005) Assy Univ. Shafts

Use this assembly universal shaft to improve transmission efficiency and ease of maintenance of ITEM 58354 1/10 R/C The Frog (2005).

About the Model

1 set sufficient for 1 R/C car.
Includes: wheel axle x 2, 37mm swing shaft x 2, cross joint x 2, 2x9.8 shaft x 2, 3x2.5 grub screw x 3, wrench (1.5mm) x 1, anti-wear grease

*Compatible chassis: 58354 The Frog (2005)

Frog(2005) Assy Univ. Shafts

Article number: 300053907
Product: DB-01 5x8mm Al.Ball Connector(5)Bl.anod.

Use to adjust position of upper arm on competition-ready R/C chassis. Length from bearing surface to ball connector has been reduced from 5mm to 4mm, to increase setting range. Made from high durability aluminum.
*Compatible chassis: TA05, TRF415MSX, TB Evolution IV

5x8mm Alu. Hex Ball Connecto

Article number: 300053906
Product: DB-01 5x5mm Al.Ball Connector(5)Bl.anod.

Use to adjust position of upper arm on competition-ready R/C chassis. Length from bearing surface to ball connector has been reduced from 5mm to 4mm, to increase setting range. Made from high durability aluminum.
*Compatible chassis: TA05, TRF415MSX, TB Evolution IV

5x5mm Alu. Hex Ball Connecto

Article number: 300053901
Product: TRF Special Damper F103GT

Add these oil dampers to your F103GT Chassis for even better performance. Low friction fluorine coating of cylinder, together with titanium coated piston, secures smooth damper movement. Adjustable type spring retainer allows for fine tuning of spring pressure.
*Compatible chassis: F103 and C Car chassis

TRF Special Damper F103GT

Article number: 300053900
Product: 04 Spur Gear 93T/104T (F103GT)

0.4 Module spur gear features finer teeth than standard kit-included 0.6 module gear, allowing minute ratio adjustment to improve acceleration and efficiency. Gear contains molybdenum for reduced friction resistance.
*Compatible chassis: Mesh with #53101 to #53101 (0.4 pinion gear) to use with F103 and C Car chassis

04 Spur Gear 93T/104T (F103GT)

Article number: 300053897
Product: Aramid Drive Belt blue TA05

This is a blue color varation of the popular aramid drive belt for the TA05 chassis. Includes one belt.

TA05 Aramid Drive Belt Blue
* Ersatz für 51210 *

3x10mm Alu. Turnbuckle Shaft*4

Article number: 300053887
Product: Marking Sticker (Dragon)

Tamiya introduces 2 new marking sticker sets for decorating R/C car bodies. *Compatible chassis: All 1/10 and 1/8 scale on and off-road R/C cars

Marking Sticker (Dragon)

Article number: 300053881
Product: DF-03 Buggy-Wheels DF-Dish white/rear (2)62/35

Newly designed off-road wheels for tires featuring larger diameter and width, and new micro pin tread pattern designed for optimum running and control on hard dirt tracks.
*Compatible chassis: most Tamiya off-road buggy chassis.

Large Dish Wheels Rear 62/35

Article number: 300053880
Product: DF-03 Buggy-Wheels DF-Dish wh.fr(2)62/25

Newly designed off-road wheels for tires featuring larger diameter and width, and new micro pin tread pattern designed for optimum running and control on hard dirt tracks.
*Compatible chassis: most Tamiya off-road buggy chassis.

Large Dish Wheels Front 62/25

Article number: 300053876
Product: Alum. Damper Retainer -1mm (4) Blue anod

Use these aluminum damper retainers to lower center of gravity by 1mm.
*Compatible chassis: miscellaneous

Alu. Damper Retainer 1mm Down

Article number: 300053864
Product: TT01 Alum.Steering Link

★This lightweight, precision aluminum component offers superior rigidity. ★Built in ball bearings contribute to crisp handling and stable speed.

Compatible Chassis
TT-01 Type-E, TT-01 Type-ES & TT-01D Type-E Chassis

Warning! Not suitable for children under 14 years.

Article number: 300053863
Product: DT-02 Ball Diff. Set

Ball diff set provides limited slip effect, improving mobility and traction while enabling stable high speed cornering. Diff effect also protects gears from damage. Gear width has been reduced from 20mm to 15mm, reducing friction loss.


*Compatible chassis: DT-02 (ITEM 58340 Super Fighter G must use with ITEM 53791 Assembly Universal Shaft)

Kit includes
•17mm thrust washer x 2
•3mm steel ball x 10
•1150 thrust bearing x 1
•Gearbox joint (long) x 1
•Gearbox joint (short) x 1
•Diff gear x 1
•Stepped bolt x 1
•Pressure plate A x 1
•Pressure plate B x 1
•Pressure plate cap x 1

DT-02 Ball Diff. Set

Article number: 300053857
Product: GP Spur Gear 105T 04 TA05

0.4 Module spur gear features finer teeth than standard kit-included 0.6 module gear, allowing minute setting changes to improve acceleration and efficiency. Gear made from special low friction plastic material and features high transmission efficiency.

*Compatible Chassis: TA05, TRF415MS

04 GP Spur Gear 105T (TA05)

Article number: 300053851
Product: TRF501X/DB-01 Titan Suspen.Shaft 46mm(2)

Titanium coated shafts extend the wear life cycle of suspension parts.

Compatible Chassis: TRF415MS, TB Evolution IV

46mm Titanium Sus. Shafts

Article number: 300053850
Product: TRF Damper Titanium Piston Rod

Titanium coated damper shafts extend the wear life cycle of suspension parts.

TRF Damper Titanium Piston Rod

Article number: 300053847
Product: Assembly Universal Shaft 46mm

Packaging the popular assembly universal shaft with the perfect combination of parts for use with the TA05 chassis.
Compatible Chassis: TA05, TRF415 (excluding MS).
Must use F201 50mm long swing shaft to use with reversible suspension.


Set includes:
- 46mm Assembly universal swing shaft (steel) x 2
- Cross spider x 2
- Wheel axle x 2
- 2x9.8mm Needle roller pin x 2
- Hexagonal wrench (small) x 2

Article number: 300053832
Product: DT-02 Spring Set (2x4)

Set of 8 front and rear springs to be used with CVA damper to allow suspension adjustments to suit road conditions. Soft type are red, hard type are blue for easy recognition.

Set includes:
•Front springs (2 each, soft and hard)
•Rear springs (2 each, soft and hard)

•Compatible Chassis: DT-02 with CVA damper

DT02 Spring Set

Article number: 300053831
Product: DT-02 Alum. Motor Heat Sink

Special motor heat sink has more and longer fins than ordinary heat sinks increasing effectiveness. Motor cling-hole features slit to allow air entry. Both heat sink and motor plate feature blue anodized aluminum for snazzy finish.

Set includes:
•heat sink x1
•motor plate x 1
•Compatible chassis: DT-02

DT02 Alu. Motor Heat Sink

Article number: 300053828
Product: DT-02 Turnbuckle Suspen. Arm &Tie-Rod Set

★These turnbuckle shafts are for use in place of DT-02 upper arms and steering tie-rods. ★Use them to fine-tune camber and toe setup without detaching adjusters. ★Contains two each of 3x42mm and 3x38mm shafts, plus one each of 3x65mm and 3x85mm shafts. ★Dedicated wrench, adjusters and ball connectors are also included.

Compatible Chassis
DT-02 Chassis

Warning! Not suitable for children under 14 years.

Article number: 300053827
Product: Stabilizer Rod Stopper (4)

When using sway bars in a touring car sedan it is critical to fix the sway bar onto the chassis as secure as possible without binding the bar. These stoppers are used to prevent the sway bar from moving left to right under load. A sway bar should move freely up and down, but should not move from side to side. These stoppers prevent that from happening and allow the bars to perform their function correctly.

Stabilizer Rod Stoppe

Subaru Legacy B4 2.0 Body

Article number: 300053823
Product: Clamp Alu Wheel Hub 5mm

★Cap screw-affixed aluminum wheel hubs make for very secure attachment. ★Design ensures 2x10mm stainless shafts remain safe when detaching. ★Includes four 5mm thickness hubs, cap screws, and other small parts.

Compatible Chassis
TT-02*1, TT-02 Type-S*1, TT-02D*1, TT-01D Type-E, TT-01 Type-E*1, TT-01 Type-ES*1, TA07 PRO, TA06*1, TA06 PRO*1, TA06 MS*1, TA05 Ver.II*1, TB-04*1, TB-04 PRO*1, FF-04 EVO, FF-03*1, FF-03 PRO*1, TRF419, TRF419X, TB Evo.7, TB Evo.6, TB Evo.6 MS, M-07 Concept, XV-01T and XV-01 PRO Chassis
*1 Use with Item 53646 or 53647.

Warning! Not suitable for children under 14 years.

Article number: 300053792
Product: DF-03Ra Assembly Universal Shaft (2)

Compared to a standard axle/dog bone drive shaft, a universal shaft reduces power loss caused by friction during steering.

•Compatible chassis: TT-01, TT-02 and TA04
•Must use item 54477 when using this part with the TT-02 chassis

Univ. Shaft (TT-01, TA04)

Article number: 300053791
Product: DF-02 Universal Shaft Assembly (2)

Compared to a standard axle/dog bone drive shaft, a universal shaft reduces power loss caused by friction during steering.

Compatible chassis: DF-02

DF02 Univ. Shaft

Article number: 300053790
Product: Cup Joint Universal Shaft

Use with DF-02 Assembly Universal Shaft (item 53791) or Assembly Universal Shaft (TT-01, TA04) (item 53792).
•Compatible chassis: TT-01, DF-02

Cup Joint for Univ. Shaft

Article number: 300053767
Product: 3x10mm Socket Screw / Blue*5

★These aluminum screws are not only lightweight and durable, they feature hex heads for superior tightness. ★Components feature a stylish blue anodized finish.

Warning! Not suitable for children under 14 years.

Article number: 300053726
Product: 6mm Shim Set *10 x 3types

These shims can be used to adjust the clearence of 6mm shafts. Contains 10 pieces each of 0.1mm, 0.2mm and 0.3mm thickness.

?6mm Shim Set *10 x 3types

Article number: 300053709
Product: DB-01 Fluorine Coated Suspens. Balls(8)

Fluorine coating reduces friction between suspension ball and mount, realizing more fluid suspension movement. These suspension balls will fit the following chassis cars: TRF 415, EVO III & 4,5, TA-05, TRF 501X, DB-01.

Fluorine Coated Sus. Ball *8

Article number: 300053703
Product: DF-02 Speed Spur Gear 67 Teeth M0.6

★Use this spur gear with kit-standard 19T pinion gear for a 9.17:1 gear ratio, or with separately sold 22T pinion gear for 7.92:1.

Compatible Chassis
DF-02 Chassis

Warning! Not suitable for children under 14 years.

Article number: 300053697
Product: Super Stock Motor RZ

The Super Stock Motor RZ is the second release in the 23T stock motors. Perfect for sprint racing and high-speed tracks, the RZ features higher revolutions than the Type RR Stock Motor. Features lay-down brushes, red anodized end bell with brush dampers, terminal heat sink, detachable chip capacitor and can be disassembled for easy maintenance.

Super Stock Motor RZ

A high performance motor for electric radio control car use.
A high revolution motor designed for sprint race or high speed track.
Can be disassembled for maintenance. Features lay-down brushes
Red anodized end bell with brush dampers.
Features terminal heat sink and detachable chip capacitor.
23 turn motor
Usable voltage: 7.2V
R.P.M. at best efficiency: 27,500rpm (7.2V)
Torque at best efficiency: 500g-cm (7.2V)
JRM certified motor.