JavaScript appears to be disabled in your browser.
You must enable JavaScript in your browser to take advantage of all the features in this website.
Article number: 300147304 Product: 1/10 RC Fighting Buggy (2014) This updated version of the Fighting Buggy (originally the Super Champ back in 1982), now receives a further limited edition release with a new number - Item 47304. Please note that the contents are the same as Item 84389; only the number is different. About the model • This is a 1/10 scale R/C model assembly kit. • The classic body of the original is reproduced in durable ABS resin with an aluminum roof panel with wing. • Stickers retain many of the themes of the classic model while also adding some new motifs. • Lightweight and durable 2.5mm thick FRP chassis plate is compatible with Item 55105 Tamiya LF Battery LF1100-6.6V Racing Pack (M-Size) (sold separately). • Original transverse damper rear suspension setup with progressive spring and separate oil reserve tank is again employed. Front suspension is double trailing arm type. Front/rear sus arms are die-cast. • Employs durable die-cast sealed gear case with direct drive setup, which also houses the motor. • Ribbed front and rear spike tires make for a controllable drive. They are fitted securely to 3-piece wheels. • Type 540 motor included. • Comes in nostalgic blister pack style packaging.
Included: Assembly kit with pictured user guide, electric motor type 540, ABS body
Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
Article number: 300058692 Product: 1:10 RC MB Unimog 406 U900 (CC-02) • This is a 1/10 R/C model assembly kit. Length: 384mm, width: 196mm, height: 224mm. Wheelbase: 242mm. • The distinctive form of the Unimog is accurately depicted in durable polycarbonate, with separate parts included for side mirrors and fuel tank, plus a metal-plated front grille and emblem. • Includes block pattern tires, and red ABS wheels with a depiction of bead lock designs. • Propeller shafts (short: 76mm) are also included. • The CC-02 chassis is designed for a wide range of off-road scenes including rocky terrain, and its ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear.
Article number: 300058691 Product: 1:10 RC Ford Escort Custom (TT-02) • This is a 1/10 scale R/C model assembly kit. Length: 425mm, width: 189mm, height: 145mm. Wheelbase: 257mm. • Features a 1.0mm polycarbonate body, and includes clear body for export and pre-painted body for the Japanese market. Separate parts are included for side mirrors and rear wing. • Dish-type wheels (previously used on Item 58257, etc.) are molded in white ABS plastic, and paired with treaded tires. • Stickers and masking stickers for use in the paint job are also included. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis.
Article number: 300058690 Product: 1:10 RC Landfreeder Quadtrack TT-02FT PB • This is a 1/10 scale R/C model assembly kit. Length: 425, width: 247mm. • The Landfreeder body comes molded in polycarbonate, pre-painted Black (PS-5) with Smoke (PS-31) windows. Separate plated parts recreate grille cover, fog lamps and roll bar. • The TT-02FT is a variant of the TT-02, with four tracks on its suspension. • Each of the three-sided trackunis is 39.3mm in width and has a contact area of 60mm length. Tracks require assembly from links, and offer efficient traction. • Two types of elastomer track link (standard and grouser) are included for setup options. • Track units are attached to suspension arms via plates, and each features a sprocket and four rollers. The third roller is sprung to further enhance performance. • Polycarbonate chassis cover and wheel well liners give protection from dust and dirt encountered off-road. • TT-02 four-bevel differentials and identical suspension arms are used.
Article number: 300058689 Product: 1:10 RC Ford GT Mk.II 2020 (TT-02) PB • This is a 1/10 scale R/C model assembly kit. Length: 479mm, width: 188mm, height: 112mm. Wheelbase: 257mm. • The ultra-honed form of the car is recreated in lightweight polycarbonate, with separate parts used to depict flying buttresses, rear wing and side mirrors. • Stickers are included to decorate the body, as are masking stickers for use in the paint job. • Twin five-spoke wheels are in line with the model’s racy look. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis.
Article number: 300058687 Product: 1:10 RC Ford Escort MkII Rally PB MF-01X Rally cars are always an exciting subject, accomplished both on asphalt and flat dirt, and Tamiya is delighted to announce the addition of another to our R/C stable: the Ford Escort Mk.II Rally, depicting a car which was RAC Rally champion from 1975-1979. Fittingly, it is based upon the MF-01X chassis, which has dedicated rally parts and is at home on a range of surfaces. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 414mm, wheelbase: 239mm (L). • The classic Escort Mk.II form is breathtakingly recreated in polycarbonate, and pre-painted in White. Separately molded plastic components are included to recreate bumper, side mirrors and fog lamps. • Polycarbonate front and rear light cases are compatible with separately sold 5mm LEDs. • Stickers are included to recreate blue livery sections, sponsor logos and more. • The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension. • Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be converted to S and M wheelbases with separately sold propeller shafts. • A host of Hop-Up Option parts are available to tune the MF-01X chassis.
Article number: 300058686 Product: 1:10 RC VQS (2020) 4WD Buggy The Vanquish (Item 58076) is a legendary buggy from our R/C back catalog, and now makes a much-anticipated return as a re-issue named the VQS, with tweaks to bring it into the modern day. We have saved owners some work, too, with a pre-cut and pre-painted body that means you’ll be able to get driving that little bit quicker! About the Model • This is a 1/10 scale R/C model assembly kit. • The classic form of the buggy is captured in lightweight and durable polycarbonate, pre-painted and cut, with holes already made. Stickers are based upon those in the original, and just require application to complete the body. • A bathtub chassis provides a really solid base for the model that lets you enjoy thrilling off-road rides without undue worry. • Highly rigid aluminum front uprights and efficient universal shafts are designs inherited from the 2011 re-issue of the Avante (Item 58489). • The smooth drivetrain employs the planetary gear differential units from the original Avante. • The model is compatible with Tamiya LF2200-6.6V battery packs.
Article number: 300058685 Product: 1:10 RC Comical Hotshot (GF-01CB) • This is a 1/10 scale R/C model assembly kit. • Includes a lightweight and durable stylized polycarbonate version of the Hotshot body and wing, developed specially for this model. The body is pre-painted in PS-2 Red to save the hassle of a paint job. Stickers based upon the 2007 re-issue Hotshot (Item 58391) are included for decoration. • Stylish bumper and muffler parts are included, as well as dedicated side guard components. • Separately sold 5mm LEDs can be used to light up the model. Light pods are included. • ST block bubble tires have stepped block patterns (width/diameter: front 45/99mm, rear 55/99mm). • The GF-01CB chassis offers efficient gear-driven 4-wheel drive. • ABS two-part wheels have red and white spoke parts. • CVA Super Mini oil dampers molded in red ensure your ride has superior cushioning. • A rear wheelie bar lets you perform thrilling wheelies by slamming on the throttle.
Article number: 300058684 Product: 1:10 RC Toyota G.R. Yaris (M05) Here is a brand new body appearing on the supremely fun M-05 Chassis! The subject is the TOYOTA GR Yaris, a car which was manufactured as part of the homologation process for the Yaris WRC that marked Toyota’s rally comeback after 20 years away, and with magnificent success, too – it took a Manufacturer’s title in 2018, a Driver’s title in 2019, and is back for more in the 2020 championship. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 371mm, width: 168mm, height: 137mm. • The sporty form of the car is captured by a lightweight, durable polycarbonate body • The sporty form of the car is captured by a lightweight, durable polycarbonate body unpainted • Wheel arches and the separate polycarbonate light cases come pre-cut. • Separate injection molded parts are included to recreate side mirrors. • The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity. • 11-spoke wheels are molded in black and paired with 60D radial tires. • This model uses the 239mm L wheelbase. • Comes with marking stickers to decorate the body. • The popular M-05 chassis has a wide range of Hop-Up Option parts available to tune the chassis.
Article number: 300058682 Product: 1:10 RC 1991 Audi V8 Touring (TT-02) Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Audi V8 touring car with a 456hp 3.6-liter V8 which graced the DTM (Deutsche Tourenwagen Masters) in 1991. That season, it took four victories overall and carried Frank Biela to the drivers’ title. About the Model • This is a 1/10 R/C model assembly kit. • The powerful, imposing body is molded accurately in lightweight and durable polycarbonate. • Stickers are included to recreate the markings for the no.45 car driven by 1991 champion Frank Biela. Masking stickers will aid in the paint job. • Two-piece mesh wheels (Item 50548 design) have silver color rims and gold color spokes. They are paired with racing slick tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • A plethora of Hop-Up Option parts is available to tune the TT-02 chassis to your needs.
Article number: 300058654 Product: 1:10 RC Lancia 037 Rally (TA02-S) Tamiya is delighted to announce the release of this model, which sees the classic Lancia 037 Rally body (previously used in Items 58040 and 58278) paired with the evergreen TA02 chassis' short wheelbase variant. The 037 Rally was Lancia's 1983 Group B WRC offering and took a 1-2 at the Monte-Carlo Rally as it romped to that year's manufacturers' championship. Its dashing body design was the work of the renowned artists at Pininfarina, and the highly distinctive shell retains popularity even today. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 422mm, width: 186mm, height: 132mm. • The injection molded body offers a highly realistic recreation of the 037 form, and comes with metal-plated light cases for headlights, taillights and fog lamps. Side mirrors and windshield wipers are separate parts. • The interior features a piece including depictions of driver & co-driver, plus dashboard. • The TA02S chassis is a shaft-driven 4WD unit with bathtub frame, a rear ball diff and front gear diff. • Four-wheel independent double-wishbone suspension is paired with CVA oil dampers. • The front bumper and sticker sheet are newly-produced for this model. • Compatible with standard Type 540 motors.
Article number: 300056364 Product: 1:14 RC Scania R470 Silver Edition This is a special edition of the R/C Scania R470 truck (original: Item 56318), the stylish 4x2 model that depicts a vehicle belonging to Scania’s International Truck of the Year 2005 award-winning R Series. It is a great option for those without the time or confidence to apply a paint job to their kit, as cab parts come pre-painted in TS-17 Gloss aluminum, and given a urethane coating for a beautiful, lasting finish. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 452mm, width: 187mm, height: 293mm. • The classic form of the R470 is recreated accurately, complete with cab that tilts forward separately from fenders, just like on the full-sized truck. Cab, F, H, K, and M parts are molded in gray and pre-painted in Gloss aluminum (TS-17), with a urethane top coat for a stunning finish. • Interior features such as seat and dashboard are depicted. • 2-axle chassis utilizes ladder frame with aluminum side channels and resin cross members. Realistic drivetrain has a front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Highly realistic suspension employs metal leaf springs. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with a range of tractor truck option parts (TROP). Use with Multi-Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.
Article number: 300047471 Product: 1:10 RC The Grasshopper II Black Edition • This is a 1/10 scale R/C 2WD buggy model assembly kit. Length: 400mm, width: 223mm, height: 136mm. • The durable black injection molded polystyrene body just requires application of stickers for easy setup, and has a driver figure (not painted) for attachment. • The durable ABS chassis uses front swing arm and rear rolling rigid suspension setups. • Fully enclosed gearbox contains a differential gear to aid smooth cornering. • Longitudinal battery is easily removable from the back of chassis. • Wheels are molded in durable ABS plastic. • Uses CVA oil dampers and Item 45069 TBLE-04S for export, and friction dampers for kits sold in Japan. • Compatible with a range of Hop-Up Option parts.
Article number: 300047470 Product: 1:10 RC Top Force Evolut. (2021) 4WD PB • This is a 1/10 scale R/C model assembly kit. Length: 400mm, width: 250mm, height: 190mm. Wheelbase: 270mm. • The stylish body is molded in polycarbonate, pre-painted and cut, with body mount holes already made. • Features double deck frame and damper stays crafted in lightweight and rigid carbon fiber material. • The shaft-driven 4WD chassis includes aluminum front and rear ball differentials for high quality setup, as well as aluminum high capacity dampers for superior shock absorption. • Choose between rigid and one-way counter gear options. • Item 53791 universal shafts are employed front and rear, high-precision components for minimal speed loss, and smooth cornering.
Article number: 300047461 Product: 1:10 RC Opel Calibra V6 (TA02) 4WD • This is a 1/10 scale R/C model assembly kit. Length: 448mm, width: 185mm, height: 131mm. Wheelbase: 260mm. • The bulky 1990s form of the Calibra V6 is captured in style by a polycarbonate body, with separate parts recreating the side mirrors, wiper arms and rear wing. • The model utilizes the shaft-driven 4WD TA02 chassis, which is based around a durable bathtub frame. • Openable gearboxes house a front 3-bevel gear differential and rear ball differential. • The TA02 features 4-wheel double wishbone suspension and CVA dampers for smooth, responsive handling. • White mesh type wheels are paired with slick tires. • Included in the kit are two big sticker sheets to recreate the various sponsors and other markings, plus masking stickers for use in the paint job.
Article number: 300047460 Product: 1:10 RC Fighter Buggy RX Memorial DT-01 1996 was the year that the Fighter Buggy RX first appeared, and it played a big part in the German "Fighter Cup" series, which also started in the same year and marks its 25th anniversary in 2021. To celebrate, we are releasing this special Memorial edition of the kit, based upon the trusty DT-01 chassis. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 390mm, width: 236mm, height: 138mm. • Features a stylish molded plastic buggy body and integrated wing, with parts included to create a driver figure. • The DT-01 chassis gives proven off-road performance, underpinned by rear rolling rigid axle suspension with a sealed gear case and differential for smooth power and turns. The front of the model employs a swing axle setup for ample stroke. • Durable ABS plastic wheels are paired with ribbed front and spike rear tires. • CVA oil dampers ensure your ride has superior cushioning.
Article number: 300047458 Product: 1:10 RC Thunder Dragon (2021) 4WD PB • This is a 1/10 scale R/C model assembly kit. Length: 390mm, width: 240mm, height: 130mm. Wheelbase: 260mm. • The chassis is based around an ABS plastic bathtub frame for excellent durability and ease of maintenance. • 4-wheel double wishbone suspension uses CVA oil dampers and a front stabilizer for a superior ride. • Features shaft-driven 4WD with front and rear die-cast 3-bevel differentials for smooth, superior handling feel. • Semi-pneumatic spike tires give great grip, and are paired with large-diameter ABS wheels. • The streamlined Thunder Dragon body is molded in polycarbonate, with non-canopy sections pre-painted in silver. It is pre-cut for convenience.
Article number: 300047457 Product: 1:10 RC Fire Dragon (2020) This is an updated re-release version of the 4WD buggy Fire Dragon, the original of which was first released in 1989. Both fans of yesteryear and modern day R/C aficionados will love the cultured drive and the classically styled body. About the Model • Length: 390mm, width: 240mm, height: 139mm. • The chassis consists of a tough bathtub frame plus front and rear gearboxes with suspension attached. • 4-wheel double wishbone suspension uses CVA oil dampers for a superior ride, and a front stabilizer for a firm setup. • A new aluminum motor mount gives improved rigidity. • Front and rear sealed differentials are die-cast 3-bevel types for superior handling feel. • Use adjusters in the 3-piece steering tie-rod setup to alter toe. • Body is molded in polycarbonate and pre-painted red. Just apply stickers to complete it.
Article number: 30047456 Product: 1:10 RC TB-05R Chassis Kit Enter a new top model in the TB-05 chassis range: the TB-05R takes the shaft-driven TB-05 PRO chassis and loads it with a swathe of Hop-Up Options and even some dedicated parts that make this a seriously fast car! - Carbon Fiber Reinforced Chassis (Hard)* - 39mm Lightweight Rear Swing Shafts (53506) - 06 Module Hard Coated Aluminum Pinion Gear (24T) (54771) - Aluminum Cup Joints for TB-04 Gear Differential Unit (Long & Short) (54543) - TB-05 Aluminum Servo Mount (54800) - TB-05 Aluminum Steering Bridge (54802) - TB-03 Carbon Reinforced A Parts (Gear Case) (54098) - Aluminum Adjustable Separate Suspension Mounts (A) (54884) - TRF419 Suspension Upgrade Set (54886) - Stabilizer Rod Stopper (53827) - TB-05 Carbon Front Damper Stay (for TRF Super Short Big Bore Dampers) (54846) - TB-05 Carbon Rear Damper Stay (for TRF Super Short Big Bore Dampers) (54847) - TRF Super Short Big Bore Dampers+ (4pcs.) (42353) - Aluminum One-Piece Motor Plate* - Clamp Type Aluminum Wheel Hub (4mm) (53570) - TB-05 Aluminum Steering Arms (54801) - 3x50mm Aluminum Turnbuckle Shaft (54845) - Aluminum Adjustable Suspension Mount (A) (54881) - Soft Stabilizer Set (TA07, TB-05) (54979) - 46mm Titanium Coated Suspension Shafts 2pcs. (53851) *denotes dedicated parts for this chassis.
Article number: 300047454 Product: 1:10 RC Plasma Edge II Irid. TT-02B P/G The stylish Plasma Edge is back, this time as a limited edition kit with a bold iridescent paint job that will seriously turn heads. The model is based upon the TT-02B chassis, the buggy version of our beginner-friendly, highly tunable shaft-driven 4WD TT-02. About the Model: • This is a 1/10 scale R/C model assembly kit. Length: 370mm, width: 250mm, height: 160mm. • The stylish polycarbonate body and wing are pre-painted in PS-46 Iridescent purple/green, and pre-cut. • Understated black wheels and dampers ensure the eye is drawn to the body. • Stickers have a dedicated color scheme dedicated for this model. • The TT-02B chassis is the buggy evolution of Tamiya's popular 4WD entry level unit, the TT-02 chassis. • Bathtub-type frame has longitudinal battery and R/C mechanism placed flat for low center of gravity. • 4-wheel double wishbone suspension features long arms and CVA shock units, and is combined with high grip square spike tires to give excellent traction. • Front and rear gearboxes have differentials to ensure smooth cornering. • A wide range of Hop-Up Option parts are available to tune the TT-02B chassis.
Article number: 300047453 Product: 1:10 RC VW Bus Type 2 T1 Flower Power Add some peace and love to your R/C life with this new color variation of our Type 2 (T1) model that turns it into a veritable Hippy wagon! The model is based upon the proven 2WD M-05 chassis. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 426mm, width: 195mm, height: 177mm. • The form of the 23-window Type 2 T1 bus is masterfully recreated in polycarbonate and pre-painted in PS-3 Light blue, with separate molded plastic parts included to create bumper, light cases and side mirrors. • A brand new sticker sheet with hippy-inspired designs is included to decorate the body. • The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity. • This model uses the 239mm L wheelbase. • Comes with marking stickers to decorate the body. • The M-05 has a wide range of Hop-Up Option parts available to tune it.
Article number: 300046703 Product: 1:10 RC X-SA Hornet Another true Tamiya classic joins the new X-SA series in the form of the Hornet, a childhood dream for many early R/C fans and still a highly popular model in the modern day. About the Model • This is a 1/10 scale finished R/C model. Length: 400mm, width: 230mm, height: 150mm. Wheelbase: 251mm. • Finished polycarbonate body and wing are pre-painted in black, and have the iconic Hornet livery stickers applied. • The chassis comes ready-assembled. • Independent swing axle front suspension utilizes friction dampers, while rolling rigid axle rear suspension is fitted with oil filled dampers. • Sealed rear gearbox protects diff gear during off-road running. • Requires separately sold R/C equipment, battery pack and charger.
Art.Nr.: 300046702 Product: 1:10 RC X-SA Racing Fighter (DT-03) Another new subject joins the new X-SA series, and it’s a modern classic: the Racing Fighter (original kit was Item 58628). The model is based upon the stylish, slimline DT-03 chassis. About the Model • This is a 1/10 scale finished R/C model. Length: 400mm, width: 244mm, height: 134mm. • Polycarbonate body and wing are pre-cut and pre-painted, with marking stickers applied. • Ribbed front and square spike rear tires ensure an accomplished off-road drive. • The DT-03 uses a tough monocoque frame. Big wheelbase (287mm) and tread (front: 221mm, rear: 208mm) measurements give it great performance on- and off-road! • Front arms have 25-degree skid angle for great off-road driving. • Features a sealed rear gearbox with internal gear differential unit, plus a dust cover for R/C equipment. • A wide range of option parts is available to tune and customize your DT-03 chassis car. • Requires separately sold R/C equipment, servo, battery pack and charger.
Article number: 300046701 Product: 1:12 RC X-SA Lunch Box The first classic Tamiya model to join the brand new X-SA series is the Lunch Box, favored basher of many an R/C fan and offering an all-around fun 2WD drive on those iconic bulging tires! About the Model • This is a 1/12 scale finished R/C model. Length: 385mm, width: 290mm, height: 225mm. Wheelbase: 207mm. • The classic Lunch Box body is molded in styrene plastic in the original yellow, with the now legendary markings already applied. • Yellow wheels are paired with 115mm tires for some serious off-road capacity. • The durable and easy-to-assemble 2WD chassis features a box type frame with front swing arm independent and rear rolling rigid suspension setups. • A pre-assembled, sealed gearbox protects the diff gear from sand and other intruding debris. • Features a rear wheelie bar for wild wheels-in-the-air driving. • Requires separately sold R/C equipment, battery pack and charger.
Article number: 300042364 Product: 1:10 RC TA07 MSX Chassis Kit The TA07 has been a revelation since its first release, providing smooth and versatile drive in a single belt-driven setup. Now it gets an ultra-racy release in the form of the top-spec TA07 MSX chassis, based upon the TA07 MS (Item 42326). About the Model • This is a 1/10 scale R/C chassis assembly kit. • Features a choice of two new motor positions, which are slightly further rearward than Position 2 and 3 from the original TA07 PRO respectively. Motor and spur gear positions are reversed, improving traction under acceleration and when cornering. • Dedicated chassis parts are used - 2mm thickness dual bridge type vertical frame, and a choice of carbon fiber or aluminum lower decks. Different combinations of upper deck part (4 total are included) are used for the different motor positions. • TRF Super Short Big Bore Dampers are standard, but stays are also included for use with longer dampers. • Features the revolutionary TRF420 suspension setup, with plenty of potential for fine-tuning your car including pinpoint alterations thanks to suspension mount bushings.. • Utilizes dedicated lower bulkhead, motor mount, and servo mount components. • Features a longer 771mm drive belt. • Comes in a stylish and handy carry case.
Article number: 300158610 Product: 1/10 RC AQROSHOT (DT-03T) In early 2014 Tamiya introduced the new DT-03 off-road chassis. For 2015 Tamiya introduces the DT-03T, which is a TRUCK variant. The platform is intended as an easy-to-get-started model to encourage young drivers to enter the world of R/C. Its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction. The truck variant allows users to tackle bumpy street or parking lot terrain with its taller stance and wide and low profile road hugging equipped tires.
Article number: 300058370 Product: 1/10 RC Dark Impact 4WD Buggy DF-03 This 1/10 scale 4WD buggy is specially designed to excel in off-road buggy racing. It features a mid-rear mounted motor and longitundinally mounted battery for optimum balance for jumping. Battery is inserted through the bottom of the chassis, eliminating need to remove body, which makes routine maintenance easy and quick. High performance shaft drive 4WD combines with suspension system featuring extra long suspension arms for improved stability and off-road handling. About the Model - High performance 1/10 4WD buggy chassis designed for off- road racing - 4-wheel independent double wishbone suspension features CVA oil dampers and extra long suspension arms for improved stability and handling - Includes sealed diff gearbox indispensable for off-road running - Features full ball bearings - Electronic Speed Controller (Not Included) - Includes 540 type motor - Newly designed off-road tires and wheels featured larger diameter and width, and new tread pattern designed for excellent running and control on hard dirt tracks - Tires: High Density Spike Tires K (4WD/Front, 62/25), High Density Spike Tires K (Rear, 62/35) - Wheels: Large Dish Wheels (4WD/Front, 62/25), Large Dish Wheels (Rear 62/35) - 2.94 internal gear ratio.
Warning! Not suitable for children under 14 years.
Article number: 300058347 Product: 1/12 RC Lunch Box Re-Release Another one of Tamiya's classic creations, the R/C Lunch Box (1st released, 1987) was loved for its camp appearance as much as for its R/C performance. The boxy minivan body raised up over monster truck wheels ensure that this R/C van will get attention anywhere you choose to drive it. Use the sides of the van as a canvas to paint your own original designs for the ultimate conversation piece!
Lunch Box(2005)Alternativ:300058546 1:12 RC Lunch Box Black Edition300047402 1:10 RC Lunch Box Red Edition
Article number: 300156357 Product:1:14 RC MB Arocs 3348 Tipper Truck Tip-Top! The Arocs series is a line of heavy-duty models introduced in 2013 by the world's leading truck manufacturer, Daimler AG (Germany). This R/C model assembly kit recreates the dual rear axle-driven Arocs 3348 6x4 tipper truck, which runs on a 12.8-liter turbocharged inline-6 engine capable of 480hp. The highly detailed body breathtakingly captures the slimline form of the truck cab, including the distinctive bucket tooth design grille. Depictions of headlight guards, front bumper and skid plate underneath are parts of a truly realistic finish. The assembly type 3-speed transmission allows gear changes via separately available 4-channel transmitter. The ladder frame chassis features aluminum side channels with resin cross members. A realistic 1-piece resin bed is reinforced with a metal frame. Power from the front-mounted motor is delivered to rear axles via propeller shaft; a built-in differential gear on each axle enables smooth cornering. Highly-realistic suspension utilizes metal leaf springs and friction dampers. The model enjoys easy driving thanks to the float-mounted die-cast front and reinforced resin rear axles.
Article number: 300156319 Product: 1/14 RC 3-Axle-ReeferSemi Trailer Kit Owners of Tamiya's 1/14 R/C trucks have been calling for a 3-axled trailer to better recreate the load outs of trucks in their respective countries. We are now proud to present this brand new 3-axle Reefer (Refrigerated) Semi-Trailer to further distinguish our unique lineup of R/C truck products.
Article number: 300156318 Product: 1/14 RC EU Truck Scania R470 Highline Kit It has been a long time in coming, but Tamiya has heard the demand from fans around the world and is now proud to present award-winning truck maker Scania's state-of-the-art R470 Highline as the newest addition to our unique 1/14 scale R/C tractor truck series. About the Scania R470 Highline Swedish manufacturer Scania has a long history of producing exceptional trucks designed for long-haul transport. The company's R-series made its debut in 2004 and quickly built a highly favorable reputation that led to it being given the prestigious International Truck of the Year award in 2005.
Article number: 300156314 Product: 1/14 RC EU Truck Volvo FH12 Globetrotter 420 Kit The FH series was released in the fall of 1993 and became Volvo's primary truck. The following year, it was awarded the prestigious "Truck of the Year" title. It's huge 12-liter inter cooled turbo diesel engine is known as the "Euro 2", and is the result of state-of-the-art engineering technology.
Article number: 300156312 Product: 1/14 RC EU Truck Volvo FH12 Globetrotter 420 Kit Tamiya is delighted to announce that this classic is once again to be produced, returning another big name to the 1/14 Scale Tractor Truck Series. The R/C model was first released back in 2000 and recreates the Volvo FH12, a huge-selling vehicle with 12-liter turbocharged "Euro 2" engine that won the Truck of the Year in 1994. About the Model • This is a 1/14 scale R/C model assembly kit. • Length: 440mm, width: 188mm, height: 295mm, wheelbase: 272mm • The stylish form of the FH12 is accurately captured. • The chassis utilizes a tough ladder frame with aluminum side channels. A realistic drivetrain setup sees the front mounted motor powering the rear axle. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Highly realistic suspension employs metal leaf springs and friction dampers. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer.
Article number: 300156310 Product: 1/14 RC Pole-Trailer Kit w/Tubes The Pole-Trailer is able to carry pipes of various lenghts due to its collapsible pole. The trailer also features an aluminum chassis and 4 highly detailed wheels. 5 plastic pipes of 55mm in diameter and 75cm in length are included.
Article number: 300156306 Product: 1:14 RC Flatbed-Semi Trailer Kit This highly realistic 1/14 scale flatbead semi-trailer model is for use in combination with Tamiya's 1/14 R/C tractor truck. A scale appearance is achieved by using authentic components such as aluminum chassis/frame, wood-floored platform and actual chains.
Article number: 300156305 Product: 1/14 RC Ger. Truck Merc.Benz 1838 LS Kit The 1838LS tractor truck combines a massive aerodynamic silhouette with a powerful 380 horsepower, 12,763cc V8 cylinder turbo diesel engine. Tamiya's R/C model of the 1838LS truck realistically captures the looks of the full size truck.
Article number: 300056304 Product: 1:14 RC Globe Liner Cab Over Kit Tamiya has captured the attractive appearance of tractor trucks in a 1/14 scale electric powered "Globe Liner". The rear double axle drive uses rigid propeller shafts for smooth performance.
Globe Liner
Article number: 300156302 Product: 1/14 RC US Semi-Trailer Kit This Box Trailer can be hitched-up to a 1/14 scale R/C tractor truck. This trailer uses hard-anodized aluminum panels for the utmost durability and realism. Rear gate doors are open-able, just as seen on full-sized trailers.
Semi-Trailer for T.Truck
Article number: 300156301 Product: 1/14 RC US Truck King Hauler Kit The Mighty King Hauler resembles the classic conventional American tractor truck. Powered by it's 540 motor driven with a 3-speed transmission, which has no problem turning the dual rear axles. Each axle is supported with leaf spring and shocks. The metal C-Channel ladder frame, keeps the power to the pavement. Whether by itself or coupled to an optional trailer, the King Hauler is sure to turn heads.
RC Truck King Hauler
TS-58 Pearl Light Blue
Article number: 300058683 Product: 1:14 RC M-B Race Truck Actros MP4 TT-01E The Tamiya line of racing truck models welcomes a newcomer in the form of the Actros raced in the 2019 ETRC, and which carried the team to 4th place on the year, with veteran Hungarian driver Norbert Kiss 6th overall in the drivers’ standings. The model is based upon the proven shaftdriven 4WD of the TT-01 Type-E chassis. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 441mm, width: 188mm. Wheelbase: 257mm. • Please note that in Japan, this model will have a pre-painted body with pre-cut wheel arches. • The racing Actros form is captured by a brand new three-part polycarbonate body with components for body, cab and coupler. • Separately molded plastic parts depict side mirrors, front and rear light cases, plus the grille emblem. • Includes stickers recreating the sponsors and livery. • Silver color molded wheels and 70mm diameter radial tires are specifically designed for racing truck models. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling
Article number: 300058681 Product: 1:10 RC Formula E Gen2 ChLivery TC01 • This is a 1/10 scale R/C racing chassis kit. Length: 370mm, width: 187mm, wheelbase: 257mm. • Adjustable suspension mounts and plastic bushings allow fine tuning of roll center, toe and skid angle settings. • High performance Super Short Big Bore Dampers give super-responsive handling and great corner speed. They are equipped with the latest reinforced V parts, 5.8mm ball connectors and damper caps for truly optimized performance. • Dedicated carbon fiber front-center stiffener elevates pitch rigidity without sacrificing roll flex, for improved front grip and cornering.. • Includes a dedicated new servo mount component. • Integrated stabilizer end and 5mm adjuster parts are used on the new soft front and rear stabilizers. • Aluminum steering bridge and pivot mounts allow fine tuning of steering Ackerman. • Comes in a handy and stylish carry case package. • Please note that body, motor, wheels, tires and R/C equipment are sold separately. Dedicated Components: Carbon front center stiffener Aluminum stiffener mount TA07RR servo mount Soft stabilizers (front & rear)
Article number: 300058680 Product: 1:10 RC Gazoo TS050 2019 HYBRID (F103GT) TAMIYA is delighted to announce that the 2019 livery version of the highly successful TS050 HYBRID race car is to join its 2018 counterpart (Item 58665) in the Tamiya stable of R/C cars! About the Model • 1/10 scale R/C model assembly kit. Length: 418mm, width: 188mm, height: 115mm. Wheelbase: 257mm. • Stickers are included to recreate the No.7 and No.8 car liveries for not only the 2019 livery cars but also their 2018 livery counterparts. They also cover parts of the red and black livery sections. • The TS050 HYBRID's distinctive form is artfully depicted by a multi-piece polycarbonate body with separate body, shark fin, canard, light case and wing components. Molded plastic parts are used for side mirrors. • The F103GT chassis employs a double-deck FRP frame (lower: 2.5mm, upper: 1.5mm). • Utilizes front kingpin coil sprung suspension and a rear rigid type setup with FRP T-bar and friction damper. • 10-spoke gun metal color wheels are paired with super slick tires.
Article number: 300058679 Product: 1:10 RC Suzuki Swift sport (M-05/239mm) Here comes a new subject on the evergreen M-05 chassis, depicting the Suzuki Swift sport. The Swift underwent a full model change in 2017, and impressively managed to improve overall design rigidity while getting lighter. It was given wider tread, a direct injection 1.4-liter inline-4 engine and 6-speed automatic transmission. About the model: • This is a 1/10 scale R/C model assembly kit. Length: 381mm, width: 167mm. • The sporty form of the car is captured by a lightweight, durable polycarbonate body pre-painted in yellow. Wheel arches and the separate polycarbonate light cases come pre-cut. • Separate injection molded parts are included to recreate side mirrors. • The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity. • This model uses the 239mm L wheelbase. • Comes with marking stickers to decorate the body. • The popular M-05 chassis has a wide range of Hop-Up Option parts available to tune the chassis.
Article number: 300058678 Product: 1:10 RC Comical Avante (GF-01CB) About the Model • This is a 1/10 scale R/C model assembly kit. Length: 414mm, wheelbase: 239mm (L). • The classic Escort Mk.II form is breathtakingly recreated in polycarbonate, and pre-painted in White. Separately molded plastic components are included to recreate bumper, side mirrors and fog lamps. • Polycarbonate front and rear light cases are compatible with separately sold 5mm LEDs. • Stickers are included to recreate blue livery sections, sponsor logos and more. • The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension. • Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be converted to S and M wheelbases with separately sold propeller shafts. • A host of Hop-Up Option parts are available to tune the MF-01X chassis.
Article number: 300058677 Product: 1:10 RC VW Karmann Ghia (M-06) The ever-increasing stable of Tamiya R/C cars welcomes a brand new model of a classic car, with the addition of the Volkswagen Karmann Ghia to the line-up, on the RWD M-06 chassis. The Karmann Ghia was a stylish coupé based upon the same platform as the legendary Beetle. Its body was designed by Italian firm Ghia and manufactured by the German company Karmann. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 182mm, height: 125mm. • The classic form of the car is accurately captured in lightweight and durable polycarbonate. Separate plated parts depict side mirror, bumpers and light cases. • Includes marking stickers, and masking stickers for use during the paint job. • The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C units positioned on either side for optimum balance and a low center of gravity. • This model utilizes the 239mm wheelbase M-06L chassis. • Metal-plated wheels make for a great look, and are paired with front radial and rear super grip radials for superior stability and sharp handling. • A host of Hop-Up Option parts are available to customize the chassis to your driving needs.
Article number: 300058676 Product: 1:24 RC Volvo A60G Hauler 6x6 (G6-01) Our fun and enjoyable G6-01 chassis also has bodies with great personality, and now welcomes an engrossing subject in the form of a working vehicle: Volvo’s A60 hauler. The actual vehicle is a revolutionary design, offering exceptional flexibility and mobility as well as the sheer strength required to haul loads in quarries and other similarly gruelling workplaces. About the Model • This is a 1/24 scale R/C model assembly kit. Length: 486mm, width: 270mm, height: 213mm. • Aided by data for the actual vehicle, the form is recreated in style by separate polycarbonate cab and molded ABS plastic bed components. The cab component is pre-painted in yellow. • The bed can be moved manually between flat and raised positions. • Yellow deep rim wheels are paired with 115mm lug pattern spike tires. • Stickers are included to recreate details such as front grille, air inlets, headlights, logos and more. • The G6-01 chassis is a fun, innovative 6WD platform with a gear-driven powertrain, triple differentials, double-wishbone suspension and a tough monocoque frame. • Fittingly for a model of a working vehicle, chassis parts are molded in yellow. • The G6-01 can be converted to 4-wheel steering with reassembly of the suspension and a separately sold transmitter with 4WS function and R/C equipment. • A range of Hop-Up Option parts is available.
Article number: 300058675 Product: 1:10 RC MB G-Class G500 (CC-02) Get ready for a newcomer to the Tamiya off-road chassis line-up – the CC-02 is here! Even better, its first model comes with a brand new body that depicts the Mercedes-Benz G 500, a 2018 addition to the German auto giant's legendary G Class that was powered by a 4-liter V8 twin turbo engine. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 455mm, width: 196mm, height: 207mm. Wheelbase: 267mm. • TLU-01 LED Light Unit and LEDs are included for export only! LED attachment parts are also included. • The boxy form of the G 500 is recreated accurately in polycarbonate, with separately molded parts included for the front grille, side mirrors and spare tire cover. • Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis’ ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle, with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. • Twenty gear ratios between 11.09:1 and 29.28:1 are possible using separately sold pinion gears, for some serious fine-tuning! • 4-link rigid suspension is employed front and rear, with CVA oil dampers. See over the page for a more detailed introduction to the CC-02!
Article number: 300058670 Product: 1:10 RC Citroen 2CV Rally (M-05Ra) Tamiya is delighted to announce this new rally version kit of that legendary motoring icon, the Citroën 2CV. The kit features a highly realistic recreation of the body, modified for rally races, and based upon a dedicated rally chassis in the form of the M-05Ra. About the Model - This is a 1/10 scale R/C model assembly kit. Wheelbase: 239mm. - The acclaimed polycarbonate body is paired with separate bumper and side mirror parts, plus new depictions of a recovery ladder and attachment bracket. - The stylish wheels are paired with rally block tires. - Based on the front-wheel drive M-05 chassis, the rally-tuned M-05Ra features specially designed hub carriers and front/rear uprights to increase ground clearance by 5mm. Front skid guard and side guards are also included. - The chassis is based around a lightweight, narrow and durable semi-monocoque frame, and is at home both on gravel and asphalt. - A host of Hop-Up Option parts is available to soup up your chassis even further.
Article number: 300058669 Product: 1:10 RC M-08 Chassis Kit The long-running and popular M-Chassis series welcomes a new member with the M-08 Concept chassis, which employs a midship motor, rear-wheel drive layout for superior rear traction, plus a main frame split into front and rear sections. About the Model • This is a 1/10 scale R/C model assembly kit. • The chassis is split into front (suspension and servo) and rear (motor and battery) sections. It can be assembled into three different wheelbases: S (210mm), M (225mm) or L (239mm). • Rear-midship motor powers rear wheels via a differential in the MR setup. • Oil-filled differential gear is the TA06 design, which was also employed on the M-07 Concept chassis. • Features proven M-07 Concept designs: suspension arms, uprights, suspension mounts and aluminum parts. • Includes CVA oil dampers, universal drive shafts, full ball bearings and hi-torque servo saver. • Comes with new front suspension mounts (0 degrees) and hub carriers (2 degrees) for a total caster angle of 2 degrees, and smooth cornering. • Compatible with M-06 Chassis bodies. • Compatible with M-07 Concept Hop-Up Option parts such as Aluminum Rear Suspension Mount (Skid Angle Adjustment) (54787), Aluminum Rear Uprights (54781) and Low-Friction King Pin Pipes (54813).
Article number: 300058668 Product: 1:10 RC VW Type 2 (T1) (M-06) This new R/C model assembly kit depicts the 1st-generation (T1) variant of the Volkswagen Type 2 van, which was introduced in 1950 and also known as the Volkswagen Bus to many of its legions of fans. Production of the actual van continued through until 1967. The iconic body is paired with the rear-wheel drive M-06 chassis for realistic drive just like the real RR Type 2 T1. About the Model • This is a 1/10 scale R/C model assembly kit. • The form of the 23-window Type 2 T1 bus is masterfully recreated in polycarbonate, with separate molded plastic parts included to create bumper, light cases and side mirrors. • The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C units positioned on either side for optimum balance and a low center of gravity. • This model utilizes the 239mm wheelbase M-06L chassis. • Stylish metal-plated dish type wheels make for a great look. • A host of Hop-Up Option parts are available to customize the chassis to your driving needs.
Article number: 300058667 Product: 1:10 RC Audi Quattro A2 (TT-02) Here comes the latest new entry into the line-up of models on the adaptable and easy-driving TT-02 chassis. It recreates the Audi Quattro A2, which graced the 1983 WRC scene from midway through the season, contributing to driver Hannu Mikkola’s eventual Drivers’ Championship. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 458mm, width: 187mm. • The classic quattro A2 body is molded accurately in lightweight and durable polycarbonate. • Features separate metal-plated ABS parts for front and rear light cases, plus fog lamps. Side mirrors, wing and wing caps are molded in white ABS. • Please note that light cases are compatible with separately sold LEDs; fog lamps are not. • 5-spoke wheels are molded in silver, and paired with racing radial tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.
Article number: 30058664 Product: 1:10 RC Ford Mustang GT4 (TT-02) Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 was designed to compete in GT4 category racing across the world. Powered by a 5.2-liter V8, and sporting a 6-speed sequential paddle shift transmission, Multimatic suspension and aerodynamically refined body, the Mustang GT4 cuts a thrilling figure. Now, it makes a triumphant entrance into the Tamiya range of R/C models. The TT-02 chassis is adaptable and fun to drive – a great choice to get started with R/C touring cars! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 459mm. • The muscular form is captured in polycarbonate, and was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate. • Wheel arches are pre-cut out for a simpler body assembly experience. • The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis. • Separately molded plastic components depict rear wing and side mirrors. • Racy 10-spoke wheels are molded in gun metal and paired with slick tires. • Stickers are included to create an original livery, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.
Article number: 300058663 Product: 1:10 RC Toyota Hilux Extra Cab (CC-01) A brand new release on the trusty CC-01 chassis: this model recreates the latest version of a famous name in the Tamiya catalog, the Toyota Hilux. It depicts the 8th generation of the vehicle, released back in 2015, specifically a special full size version of the Extra Cab which Toyota’s British arm had made in the colors of Tamiya’s legendary Bruiser (Items 58048 and 58519) as a tribute to our model. It also appeared in some high profile PR activity. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 465mm, width: 200mm. • The rugged Hilux Extra Cab form is depicted in lightweight and durable polycarbonate, with separate metalplated side mirror and light case parts. • Includes 2 each of white (headlight) and red (taillight) 5mm-diameter LEDs and the LED Light Unit. Please note that the model light cases can be fitted with up to 6 LEDs front and rear. • Metal-plated wheels are paired with realistic tires featuring authentic block tread pattern. • Highly reliable CC-01 chassis features a full-time 4WD system and front double wishbone, rear 4-link rigid suspension equipped with 4 CVA oil dampers. • This model uses the longer 267mm wheelbase. • An expansive range of option parts is available to customize the CC-01 chassis.
Article number: 300058661 Product: 1:14 RC Buggyra Fat Fox (TT-01E) Here comes a new addition to the stable of racing trucks in the world of Tamiya R/C! This model recreates the Buggyra Racing Fat Fox piloted in the 2018 season of the European truck racing circuit by 2017 champion Adam Lacko. You’ll be able to have exciting truck races with your friends, just like the real ones thrilling fans on major circuits around Europe this summer! About the Model • This is a 1/14 scale R/C model assembly kit. Length: 420mm, width: 187mm, height: 188mm. • The Buggyra Fat Fox form is captured by a 3-piece polycarbonate body (2 cab components and body) put together using double-sided tape. • Separate polycarbonate rear fender and coupler parts, molded plastic side mirrors and 2-piece rear bumper. • Included stickers recreating the sponsors and livery of the #1 truck for the 2018 season, driven by Adam Lacko. • Black molded wheels and 70mm diameter radial tires are specifically designed for racing truck models. • Features molded parts compatible with 5mm taillight LEDs in separately-sold Tamiya LED Light Unit. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis.
Article number: 300058660 Product: 1:18 RC Dynahead 6x6 (G6-01TR) Tamiya is delighted to announce the latest 6-wheeled beast in our line-up, the Dynahead 6x6, which takes inspiration from the big trucks used in the gruelling offroad world of truck trials. It appears on a new chassis variant named the G6-01TR, based upon the G6-01, with hub reduction axles providing extra height for taking on rougher terrain. With a stylish body penned by self-proclaimed "hyper designer" Takayuki Yamazaki from Japan, (Dual Ridge, etc.) it is sure to be a fun addition to your R/C garage! About the Model • This is a 1/18 scale 6WD R/C model assembly kit. Length: 453mm, width: 244mm, height: 232mm. • Wheelbase: 173+126mm. • The cab-over truck body is a brand new design by Takayuki Yamazaki. • Hub reduction axles raise ground clearance by 15mm; in conjunction with the traction provided by a 37.35:1 gear ratio (with kit-included 18T pinion), the Dynahead 6x6 has awesome off-road and crawling capability! • 5-spoke wheels are paired with V-tread block tires (Item 53854) for superlative bite. • With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable.
Article number: 300058659 Product: 1:10 RC Toyota Gazoo Rac. WRT/Yaris WRC Tamiya welcomes a brand new rally car to the R/C model line-up with this kit recreating the Toyota Gazoo Racing WRT Yaris that is competing in the 2018 WRC. A multi-part body captures with elegance the form of this aerodynamically honed car, which boasts a 380PS, 1.6-liter 4-cylinder turbo engine and 4-wheel drive with active center differential. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 416mm, width: 188mm, height: 146mm. • The streamlined 2018 Yaris WRC form is captured in polycarbonate, with individual polycarbonate parts recreating 2 types of front canard, front light cases and rear bumper blocks. • Separately molded plastic components depict rear wing (2 parts) and side mirrors. • Dish wheels are molded in gun metal and paired with racing radial tires (Item 50419). • Stickers are included to recreate the numerous markings, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. • Please note that rear light cases are not included, and LEDs (both front and rear) cannot be installed.
Article number: 300058657 Product: 1:10 RC Land Rover Defender 90 (CC-01) Another big name joins the world of Tamiya R/C: the Land Rover Defender is an enduring vehicle that traces its lineage back to the original Land Rover cars first released in the immediate post-WWII era. This model recreates an early version of the Defender 90 (so named on account of its wheelbase length), the shorter wheelbase variant of the car. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 457mm, width: 200mm, height: 214mm, wheelbase: 242mm. • The classic Defender 90 form is accurately captured by the polycarbonate body, with slide molding used for great detail such as rear panel surfaces. • Includes separately molded parts for grille, side mirrors, light cases and tire cover. • Compatible with 5mm-diameter LEDs (White) x2 for headlights and 5mm-diameter LEDs x6 for the rear. • Matte plated wheels are paired with realistic tires featuring authentic tread pattern. • Highly reliable CC-01 chassis features a full-time 4WD system and front double wishbone, rear 4-link rigid suspension equipped with 4 CVA oil dampers. • An expansive range of option parts is available to customize the CC-01 chassis.
Art.No .: 300058656 Item description: 1:10 RC MB 190E debis Zakspeed TT-01E The Mercedes-Benz 190E in the version "debis" drove in the 90s in the German DTM racing series. The 1/10 scale TAMIYA model on the TT-01E chassis has a powerful torque-tuned electric motor and four-wheel drive. This combination ensures fast and uncomplicated driving pleasure. The robust and detailed polycarbonate body including decal sheet and the electronic speed controller are perfect for RC hobbyists.
Article number: 300058655 Product: 1:10 RC Citroen 2CV Charleston (M-05) This radio control model faithfully recreates the world-renowned Citroën 2CV Charleston. The polycarbonate body sits on top of Tamiya’s fun to drive M-05 front wheel drive chassis. Over 3.5 million cars were produced from 1948 to 1990. Its reliable air-cooled 2-cylinder engine got the little front wheel drive car from A to B with little fuss, and the car could accommodate 4 adults adequately. With its soft suspension designed for off-road driving, it is said that the 2CV could traverse a ploughed field without breaking any of the eggs it carried. M-05 at a glance: The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Gun metal color 11-spoke wheels are matched with tread-patterned radial tires and feature tire inserts.
Article number: 300058652 Product: 1:10 RC F104 PRO II w/Body Power up your R/C formula racing life with this kit, which pairs the lightweight and streamlined direct drive F104 chassis with a new lower deck, and upgrade parts, giving a sharp and responsive drive. An all-new original body is also included! About the Model • This is a 1/10 R/C model assembly kit. Length: 440mm, width: 180mm, height: 88mm, wheelbase: 270mm. • The lightweight F104 chassis is fitted with various upgraded parts to turn it into the F104 PRO II. • FRP double deck chassis has a new lower deck design, and an inline (longitudinal) battery position. • The 1.5mm thick FRP T-bar design with U-shaped cutaway is inherited from the F104WGP. It makes up the rear suspension in concert with friction plates and a TRF damper. • Features front independent coil spring suspension. Alter camber by changing upper mount attachment direction. • Utilizes an aluminum ball differential. Rear wheels can be changed without its being dismantled. • A realistic original polycarbonate body is included. Its design is inspired by 2017 trends, with a sharp, slanting nose and bulging side pontoons. Additional parts are included to create alternative lower side pontoon sections as separate parts for chassis with larger R/C equipment. • Separate parts depict the complex front wing and its low rear counterpart, rear diffuser, mirrors, helmet, etc. • Comes with realistic semi-pneumatic synthetic rubber tires, and marking stickers to decorate the body. • A wide range of Hop-Up Option parts are available to further tune the chassis to your needs.
Article number: 300058651 Product: 1:10 RC Skyline GT-R (R32) (TT-02D) Tamiya’s line of drift spec TT-02D chassis cars welcomes this model of the iconic GT-R (R32), the thirdgeneration Skyline which went on sale in 1989 in Japan and came loaded with technological advances like HICAS 4-wheel steering and ATTESA E-TS all-wheel drive. Its RB26DETT 280 PS engine was designed for the race scene. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 452mm. • LEDs are included in export versions of the kit only. • The Skyline GT-R (R32) form is recreated by a durable and lightweight polycarbonate body (originally used in Item 58428). • Separately molded parts are included in the kit to recreate side mirrors and rear wing. • Features marking stickers to decorate the car. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. As such, it is compatible with TT-02 option parts. • Comes with 24mm width drift-spec tires on mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink.
Article number: 300058650 Product: 1:10 RC VW Beetle Rally (MF-01X) This is the latest release on the MF-01X chassis, and it features a rally version of a true classic car. The Volkswagen Beetle - thanks to its superlative reliability and uncomplicated upkeep - was a fixture on the global rally circuit from the 1950s through to the 1980s, and this model is inspired by such rallying Beetles. What better chassis to pair it with than the shaft-driven 4WD MF-01X, which is at home on a range of surfaces from road to flat dirt? About the Model • This is a 1/10 scale R/C model assembly kit. Length: 397mm, width: 163mm. • The model uses the 239mm L wheelbase. • The playful form of the Beetle is captured artfully in polycarbonate. Bumpers and side mirrors are recreated using separate metal-plated parts. • Front light pods and brand new rally-style stickers are included to give the model a rally car air. Rally block tires offer excellent grip. • The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension. • Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be assembled into S and M wheelbases using separately sold propeller shafts. • A host of Hop-Up Option parts are available to tune the MF-01X chassis.
Article number: 300058649 Product: 1:10 RC NSU TT Jager (M-05) West German manufacturer NSU's Prinz was a highly popular compact car, produced between 1958 and 1973. This model recreates the Jägermeister-sponsored edition of the NSU TT, a race-oriented variant of the Prinz, of which almost 2,500 examples were built in the late 1960s and early 1970s. It was powered by a variety of inline-4 engines depending upon the spec. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 393mm. • The form of the NSU TT Jägermeister is recreated faithfully in polycarbonate. • The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity. • This model uses the 239mm L wheelbase. • Gold color multi-spoke wheels are those seen on Item 47308, paired with M-Chassis slick tires. • Comes with marking stickers, plus masking stickers for use when painting the body. • The popular M-05 has a wide range of Hop-Up Option parts available to tune the chassis.
Article number: 300058647 Product: 1:10 RC M-07 Concept Chassis Kit This high-performance front-wheel drive R/C chassis assembly kit is constructed around a rigid monocoque with lower deck and upper frame sections. It offers responsive drive characteristics and fuss-free maintenance of parts such as the easy-access differential, which can be removed from the underside with minimal disassembly. C.V.A. (Constant Volume Adjustable) oil shock-damped 4-wheel double wishbone suspension features dedicated long arms and steering linkage components for a range of setup options. A silky-smooth drivetrain utilizes full ball bearings, oil-filled gear differential unit and universal drive shafts. It can be assembled with a 225mm (M) or 239mm (L) wheelbase, making it compatible with appropriately-sized existing Tamiya M-chassis body parts sets.
Article number: 300058646 Product: 1:18 RC Konghead 6x6 (G6-01) Take a look at Tamiya's first ever big-wheeled 6WD model - the Konghead 6x6! This model utilizes a new geardriven 6WD chassis which used the GF-01 as a starting point. The excellent drive it provides will make for supremely fun off-road driving. About the Model • This is an R/C model assembly kit. Length: 420mm, width: 270mm, height: 280mm. • The 6WD chassis employs 3 differential gears to transmit power from the front-center-mounted motor to all of the model's wheels. These differentials are encased in the durable monocoque. • 6-wheel independent double-wishbone suspension is paired with friction dampers. • The brand new polycarbonate body was inspired by the classic Bullhead, and indeed its metal-plated injection molded air cleaner and muffler depictions are the same as those used on the Bullhead. • The kit manual build creates a front wheel-steering model. It also includes instructions to re-assemble it into a 4WS model with steerable rear wheels. Separately-sold 4WS function transmitter and R/C equipment are required. • The model is compatible with many GF-01 chassis Hop Up Option and spare parts. • The Bullhead-inspired body features a brand new sticker sheet with brash, colorful logos created just for this model. A host of metal-plated parts includes air cleaners and exhaust (both from the Bullhead), plus chrome-plated deep rim wheels. • Its powerful gear-driven setup allows the Konghead to take on slopes of up to 40 degrees - the perfect outdoor drive!
Article number: 300058645 Product: 1:10 RC Subaru WRX STI 24hr Nrbg TT-02 This model will recreate the Subaru WRX STI car which took an impressive victory in the SP3T class of the Nürburgring 24 Hours race at the legendary German circuit in May 2016. The car is powered by the same engine as in its production model - the EJ20 2-liter horizontally-opposed turbo engine. About the Model • This is a 1/10 scale R/C model assembly kit. • The aerodynamically-optimized form of the race version of the WRX STI is accurately rendered in lightweight and durable polycarbonate. • Separately molded parts are included in the kit to recreate side mirrors and rear wing. • The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis. • Gun metal color mesh type wheels are paired with slick tires. • Stickers are included to recreate the markings of the car, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. • Please note that R/C equipment and battery pack are separately required.
Article number: 300058643 Product: 1:10 RC The Grasshopper II (2017) The Grasshopper II is one of Tamiya's iconic radio control car kits from the late 1980's. It was an enhanced follow up release to the original Grasshopper kit. This re-release (2017) kit features a number of updates while keeping largely faithful to the original model. Its streamlined construction process makes this kit perfect for less experienced users and R/C veterans alike, while separately sold option parts can be used to enhance the model. About the Chassis A rugged ABS resin chassis is more than up to the stresses of off-road driving, and features lightweight durable plastic suspension arms, gearboxes and so on - the result is a lightweight and durable unit. Front swing axle and rear rolling rigid suspension combine for a responsive drive, while a fully enclosed gearbox is integrated with the rear axle and has a built-in differential gear to aid smooth cornering. One-piece wheels are paired with front grooved and rear spike tires for solid performance.
Article number: 300058642 Product: 1:14 RC Reinert Racing MAN TGS TT-01E Following on from the success of the groundbreaking Team Hahn Racing MAN TGS model (Item 58632) last year, Tamiya announces the release of a new racing truck product on the TT-01 Type-E chassis. It recreates the #77 truck run by Team Reinert Racing in the 2016 running of the FIA European Truck Racing Championship. About the Model • This is a 1/14 scale R/C model assembly kit. • The form of the MAN TGS racing variant is captured accurately by a 4-piece durable and lightweight polycarbonate body. It includes depictions of details such as engine, turbocharger and frame. • Separately molded parts recreate side mirror, coupler and rear bumper. • Included marking stickers recreate the sponsor livery of the #77 Team Reinert Racing truck for the 2016 season. • Wheels and 70mm diameter radial tires are specifically designed for racing truck models. • Features molded parts to make the model compatible with LEDs in separately-sold Tamiya LED Light Unit. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis.
Article number: 300058639 Product: 1:10 RC Mercedes-AMG GT3 (TT-02) Tamiya continue to expand our range of kits on the entry level TT-02 with this stunning new release. It depicts the fabulous body of the Mercedes-AMG GT3 car, which was created for the GT3 class of racing from 2016 onwards. The 6.3-liter V8 powered car has quickly become a modern legend with race results like a clean sweep of the top 4 in a 2016 Nürburgring 24-hour race. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 453mm. • The luxurious, powerful form of the Mercedes-AMG GT3 is recreated in polycarbonate. • Separately molded parts are included in the kit to recreate side mirrors and the distinctive rear wing. • PS-63 Bright Gun Metal (Item 86063) is a new Tamiya Color spray for polycarbonate, formulated especially for this model. It recreates the standard works color (requires a coat of PS-55 Flat Clear on outside of body). • The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis. • Comes with the 12-spoke wheels used in Item 58619. • Stickers are included to recreate the markings of the car, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. • Please note that R/C equipment and battery pack are separately required.
Article number: 300058638 Product: 1:10 RC MB190 E Evo.2 Zakspeed DA TT-01E This is a R/C car replica of the 1992 Diebels-Alt sponsored Team Zakspeed Mercedes-Benz 190 E 2.5-16 Evo.II as it competed in the 1992 DTM racing series in Germany. Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-01 Type E entry-level on-road chassis. The TT-01E chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. In addition to the TT-01E being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color 6-spoke wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!
Article number: 300058636 Product: 1:10 RC TA07 PRO Chassis Kit The TA series of mid-range touring car chassis has been running since 1991, and is a great option for racers, plus those ready to take the step up from entry level chassis such as the TT model series. Now it receives an update with this brand new model - the TA07 PRO chassis, which is the first new-number variant since the TA06 in 2011. It utilizes a new composite layout, fused with proven part designs from the top-class TRF419 chassis suspension. As a result, the chassis features highly optimized flex characteristics, plus tried and trusted drivetrain parts in a fresh 1 belt-driven setup. Featured Parts: TRF419 design Uprights TRF419 design Suspension Arms TRF419 design Gear Differential Units TRF Dampers Universal Drive Shafts About the Model • This is a 1/10 scale R/C chassis assembly kit. Uses a composite lower deck/upper frame setup, as opposed to the TA06's monocoque. Lower deck and side frame parts are integrated, while upper frame center brace and F/R stiffener parts are separate. • Single belt-driven 4WD provides efficient acceleration. Drivetrain utilizes 8 ball bearings. • The motor can be switched between one of three positions, each with its own performance characteristics. • Utilizes race-proven TRF419 suspension, steering parts (same Ackerman geometry) and gear diff units. • For those who can't wait to soup up or tweak the chassis even further, Hop-Up options are going on sale soon. • Includes universal drive shafts, adjustable battery holder and TRF dampers. Battery is inserted from chassis side.
Article number: 300058633 Product: 1:10 RC Blackfoot (2016) Tamiya announces this modern successor to the Blackfoot line of cars. It features the classic body from the Blackfoot III (Item 58498) mounted on the chassis used in the Monster Beetle (2015) model (Item 58618), an all-action 2WD chassis fitted out with big tires for rough-and-tumble off-road fun. This model promises to be great fun for both beginners and Tamiya veterans alike! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 440mm, width: 290mm, height: 270mm. • The ABS resin Blackfoot III body is given newly designed markings that carry on the theme of the original series of models. A resin driver figure is also included. • The rugged ABS space frame chassis utilizes double-wishbone front and trailing arm rear suspension setups in tandem with CVA oil dampers. • Rear universal drive shafts come with rubber boots to protect from dust. • A resin undercover protects the sealed gearbox at the rear of the model. • 123mm semi-pneumatic lug pattern tires are paired with yellow 1-piece wheels.
Safety note: Not for children under 14 years. The packaging has to be kept since it contains important informations. Illustration may vary from actual product in the box. CARSON reserves the rights to change, update or replace any component at any time.
Article number: 300058632 Product: 1:14 RC Team Hahn MAN TGS (TT-01E) Weighing in at a colossal 5,400kg, the trucks in the European Truck Racing Championship are truly the heavyweights of motorsport. But size isn’t the only thing that’s extreme about these incredible machines. The Team Hahn Racing MAN TGS truck is powered by a huge 1,100hp turbocharged diesel engine. To get that phenomenal power from the engine to the tarmac is no easy task, which is why the truck takes advantage of a Mechanical 16-speed ZF gearbox to get it up to speed. In 2015, driver Joachim Hahn piloted the truck to a creditable 3rd position in the Championship. The Tamiya radio control replica faithfully captures the giant race truck. The polycarbonate body sits atop the TT-01 E chassis, which is designed for easy assembly and maintenance.
Article number: 300058631 Product: 1:10 RC Impreza Monte-Carlo 99 (TT-02) The TT-02 chassis line-up is Tamiya's entry level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7). The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance.
Article number: 300058630 Product: 1:10 RC Plasma Edge II TT-02B 4WD This is an updated version of the classic Plasma Edge buggy body. It features new stickers and a tweaked body design. It is mounted on the easy-to-build and maintenance TT-02B chassis. The TT-02B uses the TT-02 as its base, adding longer suspension arms, CVA shock units, and buggy bumpers to give it great off-road performance. Of course, it retains the TT-02's excellent drivability and ease of assembly and maintenance, while motor cooling ducts and receiver case add to the model's durability.
Article number: 300058624 Product: 1:10 RC Mazda MX-5 (M-05) Roadster This R/C assembly kit model recreates the 4th generation of the Mazda MX-5 (also known as the Roadster in Japan and the Miata MX-5 in the U.S.), the iconic car with a heritage dating back to 1989 and total sales in excess of 950,000. The dynamic and lightweight car was made to amplify the thrill of driving, with a punchy 1.5-liter (2.0-liter in North American market cars) inline 4-engine and 6-speed transmission, while including modern must-haves such as advanced safety equipment. The Tamiya R/C model faithfully captures the fun and maneuverability of the real life subject as it comes on the proven M-05 M-chassis platform. The M-05 is a simple to build FWD (front wheel drive) machine, which allows for plenty of after-market parts to be outfitted as you grow with your skill. The lightweight, narrow semi-monocoque frame offers an optimized weight distribution and a low center of gravity. A ground-hugging 4-wheel independent double wishbone suspension and a 3-piece steering linkage ensure excellent stability during high-speed cornering. Three wheelbase lengths (210mm, 225mm, 239mm) are possible by simply switching the position of the rear suspension parts, enabling a wide range of body choices available from Tamiya.
Article number: 300058618 Product: 1:10 RC Monster Beetle (2015) Tamiya is delighted to announce the release of this updated version of another of our back-catalog classics, the Monster Beetle (Item 58060, from 1986). This model features a stylized version of the timeless Volkswagen Beetle body, mounted on an all-action 2WD chassis fitted out with big tires for rough-and-tumble off-road fun. This new model promises to be great fun for both beginners and Tamiya veterans alike! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 290mm, height: 240mm. • The injection-molded plastic body accurately captures the form of the early Beetle. Where possible, stickers have been kept over from the original model designs; these are joined by newly-designed markings. • The rugged ABS space frame chassis from Item 58060 has been kept on. It utilizes double-wishbone front, and trailing arm rear suspension setups in tandem with CVA oil dampers. • Rear universal drive shafts transfer power smoothly, and come with rubber boots to protect from dust. • A large dust cover is included to protect the vital R/C equipment. • The model has great off-road performance thanks to 130mm-diameter tires with a combined lug/pin spike tread. They are paired with gold color plated one-piece wheels. • Includes a driver figure.
Included: Assembly kit with pictured user guide, Tamiya ESC (capable of running brushed and brushless motors), electric motor type 540, ABS body
Article number: 300058613 Product: 1/10 R/C Toyota Supra (TT-02D) Drift Spec One of the most recognized Japanese sports cars around the world, the Supra has left its mark both on the race track in the hands of pro drivers and on the streets in the hands of enthusiasts. Now, the Tamiya model (original release: Item 58392) is given a new release on the new Tamiya drift unit, the TT-02D chassis. About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive form is captured faithfully by the polycarbonate body. • Features separately-molded side mirror and rear wing parts. • Includes carbon pattern decals for engine hood and rear wing. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires on metal-plated mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58392.
Article number: 300058609 Product: 1/10 RC Mercedes Benz Unimog 425(CC-01) The Tamiya CC-01 (Cross Country) chassis is a favorite vehicle amongst R/C enthusiasts. It’s easy to assemble and offers realistic cross country running. The list of body styles available has grown with the addition of the Unimog 425. The Unimog, of course, is a multi-purpose truck with unrivalled off-road performance and its name is an acronym which stands for the German description "UNIversal-MOtor-Gerat." The 425 variant was a heavier model that was produced in the 1970s and 1980s. It featured a 120hp engine and 2.81m wheelbase. The Tamiya R/C replica faithfully captures all of the full size Unimog details down to the large snorkel and cap vent and large side view mirrors. The Unimog body is mounted on the capable CC-01 Cross Country chassis, which features independent front suspension and a rear 4-link rigid suspension set up for fun scale trail running enjoyment.
Article number: 300058605 Product: 1/10 RC NISMO R34 GT-R Z-Tune (TT-02D)
The R34 GT-R is given a new release on the new Tamiya standard for drift driving, the TT-02D chassis. The R34 was the 5th generation of the legendary Nissan GT-R series of cars; it debuted at the 2005 Tokyo Auto Salon. The Z-Tune version was an even more impressive beast; developed by Nissan's in-house motorsports/ performance division NISMO, it was built around a 500hp 2.8-liter powerplant that could reach 8,000rpm. It also featured SACHS adjustable suspension and brakes developed in conjunction with Brembo. NISMO also went to work on the body, with racing features such as vents and wider fenders than the original. The body color was the aptly-named Z-Tune Silver, applied specially for this car. With only 20 production cars made, getting your hands on one is a difficult task, but you can pilot it in R/C form with this model!
About the Model
• This is a 1/10 scale R/C model assembly kit. • The aggressive 2-door coupe form is captured faithfully by the polycarbonate body. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58419. • Export version only includes LEDs to recreate lights on the car.
Article number: 300058604 Product: 1/10 RC Nissan Skyline GT-R R33 (TT-02D)
Tamiya is excited to announce this model on the new Tamiya standard for drift driving, the TT-02D chassis. The R33 was the fourth generation of the famous Nissan Skyline GT-R; the RB26DETT 2.6-liter inline-6 engine was a carryover from its R32 predecessor, and this time the twin turbo powerplant was fitted with a 16-bit engine control unit. The vehicle was 13cm longer than the R32, with a wheelbase extended by 10.5cm. The body was also widened and strengthened, and given an adjustable rear spoiler. Other features on this high-powered car included ATTESA E-TS 4-wheel drive system and Brembo brakes.
• This is a 1/10 scale R/C model assembly kit. • The distinctive, powerful body of the R33 is recreated in durable polycarbonate. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features CVA oil dampers, full ball bearings, a Sport-Tuned motor and aluminum motor heat sink. • Stickers and masking stickers are included in the kit. • Mesh-type wheels are paired with super driftech tires.
Article number: 300058599 Product: 1/10 RC RAYBRIG NSX Concept-GT (TT-02)
The Raybrig NSX Concept-GT is also released on the reliable shaft-driven 4WD of the TT-02 Chassis. The racing car was developed to race in the 2014 Japanese Super GT Series, and features a 1.6-liter turbocharged direct injection engine with anti-lag, plus a midship layout that optimizes distribution of car's weight, particularly taking into account its unique hybrid system.
• This is a 1/10 scale R/C model assembly kit. Wheelbase: 257mm. • The durable polycarbonate body accurately captures the low nose and complex make up of the front and rear ends. • The TT-02 is a highly versatile and easy-to-maintain chassis. • Separate parts are included to recreate dynamic rear wing and unique door mirrors. • Comes with black 10-spoke wheels. • Includes body markings and masking stickers for use when painting the model. • A wide range of option parts is available to tune and customize TT-02 Chassis cars. • Please note that R/C equipment and battery pack are separately required.
Article number: 300058587 Product: 1:10 RC Neo Fighter Buggy DT-03 The Neo Fighter Buggy is mounted on the easy to build DT-03 chassis platform. Intended as an easy-to-get-started model to encourage young drivers to enter the world of R/C, its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction. DT-03 Chassis at a glance: The stylish slim-line form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to CVA oil dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering.
Article number: 300058584 Product: 1:10 RC TT-02D Drift Spec Chassis The TT-02 chassis is Tamiya's latest entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. The TT-02D is the Drift Spec variant that includes special parts to make it a fun to drive drifting machine. Includes Super Driftech tires (24mm width) which feature a special resin compound suited to drift driving. Includes full ball bearings and CVA (oil-filled) Super Mini shocks. Tamiya Sport-Tuned Motor and Aluminum heat sink is included. Brake disc-shaped wheel hubs (silver color) and battery holder (blue) are metal-plated parts. The TT-02 chassis offers 2 different wheelbases and tread settings without the addition of Option Parts. It also supports 10 different gear ratios. The skid-shaped underside of the bathtub type frame minimizes contact with the road surface. Body is not included in this kit. Purchase a separately-sold body of your choosing and fit it to the chassis.
Article number: 300058572 Product: 1:10 RC Volkswagen Beetle (M-06)
The Volkswagen Beetle needs little introduction to most people around the world. A record 21 million Beetles were produced over a production period spanning 60-plus years, and the distinctive rounded form of the car is a familiar sight. It was the brainchild of the famed German designer Ferdinand Porsche, and saw military service during the Second World War. The R/C model of this car was released in 19xx on the M-04 chassis and it now comes out on the modern M-06 chassis.
About the Item
• This is a 1/10 scale R/C assembly kit. • The polycarbonate body captures the instantly-recognizable form of the car. Metal-plated parts for front/rear bumper and side mirrors included to enhance realism. • Metal-plated wheels also included. • The M-06 chassis features a Rear-Motor, Rear-Wheel Drive setup and offers nimble handling performance.