RC Models

Article number: 300058519
Product: 1:10 RC Toyota 4x4 Pick Up Bruiser 2012

This electric R/C assembly kit reproduces the 4WD Toyota Hilux Pick-Up (RN36), which enjoyed wide popularity in the US and Japan during the 1980s and is still adored by many fans today. The model features a ladder frame like the actual vehicle, Type 540 motor, 3-speed transmission, and an abundance of metal parts for a high level of realism. Its live axle suspension features metal axle housings, leaf springs, and oil dampers while a metal front under guard helps the model take on tough off-road conditions. A highly detailed injection-molded body and large 123mm diameter tires also gives the model a stylish, high-lift appearance.


About the Toyota Hilux Pick-Up　

The 3rd generation Toyota Hilux Pick-up (30/40 Series) debuted in 1978 and the RN36 model was developed specifically for export markets. It featured a sporty, lightweight body and was powered by a 98hp 1,968cc 4-cylinder gasoline engine. Furthermore, its live axle suspension featured front leaf spring shackles located towards the rear to provide sufficient approach/departure angles for superb off-road performance. Front/rear flared fenders and large tires gave the truck a tall, aggressive stance. The RN36 model was mainly exported to North America but was also later sold in Japan, and there are still many fans of this pick-up to this day.

Necessary accessories:
- 4-channel R/C unit with ESC　
- Battery Pack & Charger
- Batteries for transmitter

Warning! Not suitable for children under 14 years.

Article number: 300058518
Product: 1:10 RC Super Clod Buster 2012

The Super Clod Buster is back! This monster truck features a body that was inspired by classic pick-up trucks from the 1980"s, giving it a realistic appearance. The front grille, air intake and roll bar are recreated with metal-plated parts. The truck also features a twin-motor dual gearbox 4WD drivetrain, 8 coil spring dampers and massive 165mm diameter tires, as well as a 4-wheel drive steering system to help the model navigate tight corners.

Article number: 300058489
Product:1:10 RC Avante 2011

One of the biggest names in Tamiya R/C (and Mini 4WD!), the Avante was unleashed again in 2011 with this model, that features a host of upgrades and high grade components to make it a household name again!

About the Model
• This is a 1/10 scale R/C model assembly kit. Length: 420mm, width: 240mm. Wheelbase: 260mm.
• The classic body comes with a rear wing featuring five attachment angles for multiple setup options, plus a polycarbonate undercowl.
• Based upon a shaft-drive 4WD chassis with longitudinal motor and 2mm carbon fiber double decks, plus front and rear planetary differentials and a center ball differential.
• Aluminum front knuckles and radius arm protectors make for a durable suspension setup, cushioned by oil dampers front and rear, and capped with cam-lock wheels that can be affixed without the need for tools.
• The 25T motor features a commemorative label with gold color detailing.
• Click here to see the full product introduction on the Tamiya homepage.

Article number: 300058486
Product: 1:10 RC Alfa Rom. Giulia Sprint GTA M-06

This R/C model assembly kit recreates the classic Alfa Romeo Giulia Sprint GTA in racing form. The body sits atop Tamiya’s proven gearbox-driven 2WD, rear-drive M-06 chassis, which is at home on asphalt surfaces.
The M0-6 chassis platform utilizes a rear motor and rear wheel drive set-up. The layout also features a longitudinally-mounted battery with the R/C radio gear positioned on either side of the chassis. The 4-wheel double wishbone suspension is paired with rear 60D Super Grip Radial tires for improved rear traction and drivability.

Warning! Not suitable for children under 14 years.

Article number: 300058452
Product: 1:10 RC Buggy Sand Scorcher 2010 2WD

Originally released in 1979, the R/C Sand Scorcher was greatly received from fans around the world with its humorous form and superb mechanism. Keeping true to the basic layout of the original while incorporating many refined parts, this re-released version of the Sand Scorcher will remind you of the original. This model realistically reproduces the unique form of the buggy which was seen at the one-make race at the "Baja 1000" in California, USA. The body is molded in white polystyrene and can be painted with Tamiya plastic model paints. The rear-wheel drive 2WD chassis features realistic and aggressive driving performance that will no doubt excite you.

Chassis layout:
Chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers. Electronics and battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss, and mounted on the 3-piece center-lock wheels are grooved front tires and ribbed rear tires that ensure superb off-road performance.

Warning! Not suitable for children under 14 years.

Article number: 300058414
Product: 1/10 RC Unimog 406 Ser.900 CR-01

MB Unimog 406 Ser.U900 CR01

Warning notices:
Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.
When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.
Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).
Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Warning! Not suitable for children under 14 years.

Article number: 300058405
Product: 1/10 RC Toyota Land Cruiser 40 CR-01

R/C fans have long been modifying their machines into rock crawlers. Tamiya has followed this growing segment with interest and we are now proud to present to you the fruits of our research. This new crawler features a true-to-scale Toyota Land Cruiser 40 body made from lightweight polycarbonate mounted on an all-new CR-01 chassis and is literally ready to rock.

Toyota Land Cruiser 40

Warning notices:
Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.
When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.
Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).
Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Warning! Not suitable for children under 14 years.

Article number: 300058397
Product: 1/10 RC Toyota HiLuxHighLift 4x4 3-Speed

Combining nostalgic feel with modern mechanics, the superbly detailed classic Toyota pick-up truck body is now mounted on the same chassis as the Ford F-350 High-Lift.

Toyota Hilux High-Lift

Warning notices:
Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.
When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.
Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).
Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Warning! Not suitable for children under 14 years.

Article number: 300058372
Product: 1/10 RC Ford F-350 HighLift 4x4 3-Speed

Electric R/C assembly kit of one of the most representative American pick-up trucks, the Ford F-350. The model features realistic ladder frame, 3-speed transmission and shaft drive 4WD system. Highly detailed injection molded body and large diameter wheels enhance the stylish high-ground-clearance look. Original marking stickers add to the truck's overall realism.

Ford F-350 High-Lift

Warning notices:
Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.
When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.
Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).
Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Warning! Not suitable for children under 14 years.

Article number: 300058346
Product: 1/10 RC The Grasshopper i 2005 2WD Re.Re

Let It All Begin With This One Buggy

Based on 1-seater buggies seen tearing-up dirt tracks across the U.S. in the 80's, the Grasshopper first made its appearance in R/C stores in 1984. Boasting easy assembly and easy control, the lightweight Grasshopper proved an instant hit as the perfect entry level R/C kit. Also compatible with a whole range of option parts such as 540 motor and ball bearings, the Grasshopper was an entry level car that could keep up with the owners driving experience. Packed with all the fantastic features of the original kit, this fun 2WD buggy is a blast on both off-road and on-road tracks. Whether it was your first or will be your first, the Grasshopper guarantees to please.

Warning notices:
Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.
When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.
Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).
Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Warning! Not suitable for children under 14 years.

Article number: 300058336
Product: 1:10 RC The Hornet 2004 2WD Buggy LWA

About the model:
- Length: 400mm, width: 230mm, height: 150mm. Weight: 874g
- Solid bathtub frame with side bumpers
- High performance Type 540 motor
- Independent swing axle front suspension with friction dampers
-Rolling rigid axle rear suspension with oil filled dampers
- Sealed rear gearbox to protect diff gear during off-road running
-Original 3-piece assembly wheels compatible with optional ball bearings (sold separately)
- Straight ribbed racing front tires
- Spiked buggy rear tires
- Durable, shock absorbent polycarbonate body shell
- Reinforced resin bumper
- TEU-101BK Electronic Speed Controller

Article number: 300058242
Product: 1:10 RC Wild Willy 2000 (WR-02)

The Wild Willy 2 is a reproduction of the popular original Wild Willy from the mid 80s. The new Wild Willy has an all new chassis and larger tires allowing it to tread over rough terrain. Of course, the Wild Willys trade mark is the animated wheelie capability thanks to an all new wheelie bar.

WR-02 Chassis:
The WR-02 chassis features a heavy duty monocoque which has side frames to increase rigidity. R/C unit, motor, and battery pack are positioned along the centerline of the chassis and the motor's power is delivered to the rear wheels via a fully-enclosed gearbox equipped with a differential. A wheelie bar is fitted to enable exciting, wheels in the air driving action. 4-wheel double wishbone suspension and 2-piece steering tie-rod offer smooth steering response. Tires/wheels and the gearbox/motor come pre-assembled for ease of assembly.


Requires: 2-channel radio, 7.2 volt battery & charger, and Tamiya TS paint

Wild Willy 2

Article number: 300057987
Product: 1st Try TT-02B w/Neo Scorcher

Tamiya is delighted to present another great option for R/C beginners – the First Try kit version of the TT-02B offroad chassis. Users can still enjoy the informative and rewarding process of building a Tamiya chassis, but with some of the trickier sections pre-assembled. The TT-02B is a highly adaptable and beginner-friendly chassis itself, with 4-wheel double wishbone suspension and shaft-driven 4WD giving great performance on- and off-road.

Pre-Assembled Components
Lower deck & gearboxes (the latter are taped shut and require screw attachment)
Motor & mount
Rear upper arms
Front bumper & lower arms
Dampers
Front upper arms
Motor cover
Motor cover
Wheels & Tires

About the Model
• This is a 1/10 scale semi-assembled R/C kit. Length: 380mm, width: 250mm, height: 145mm.
• The pre-assembled core sections above require attachment to the chassis. Then, assemble other areas to complete the chassis!
• The TT-02B gives efficient shaft-driven 4WD and great performance on a range of surfaces.
• Long suspension arms and CVA oil dampers give a smooth ride, with square spike tires providing great grip.
• The stylish Neo Scorcher buggy body is included, with stickers for decoration. It requires painting.
• R/C equipment is sold separately.
• Please note that the instruction manual for this product is in Japanese and English only.

Warning! Not suitable for children under 14 years.

Article number: 300057412
Product: 1:24 RC SU MudMad SW-01

Tamiya welcomes a new model kit on the super-compact SW-01 chassis, called the "MudMad!" The body is inspired by off-road vehicles and was dreamt up by designer Takayaki Ya m a z a k i w h o m o d e l e r s w i l l remember from the Dual Ridge and other Tamiya vehicles.

About the Model
• This is a 1/24 scale R/C model assembly kit. Length: 190mm.
• The brand new off road car-inspired body is molded in lightweight and durable polycarbonate. It is magnet-secured for swift attachment and detachment, and comes pre-painted in PS-3 Light blue.
• The SW-01 chassis is a compact unit which promises bundles of fun!
• The body leans in the direction in which the model steers, achieving remarkably tight turning circles and helping to suppress roll.
• Strut style suspension gives a perky drive.
• A central Type 370 motor transmits power to the front and rear in a gear-driven 4WD setup.
• Can be used with standard size servos and R/C equipment despite its compact nature.
• Compatible with Tamiya LF Battery LF1100-6.6V Racing Pack (M-Size) as a power source. A battery case is available in our Spare Parts line-up for drivers who want to power their model with R6/AA/UM3 batteries.
• A central Type 370 motor transmits power to the front and rear in a gear-driven 4WD setup.
• Can be used with standard size servos and R/C equipment despite its compact nature.
• Compatible with Tamiya LF Battery LF1100-6.6V Racing Pack (M-Size) as a power source. A battery case is available in our Spare Parts line-up for drivers who want to power their model with R6/AA/UM3 batteries.

Article number: 300057409
Product: 1:24 RC Star Unit Lunch Box Mini SW-01

Article number: 300056545
Product: 1:14 ACU-01 TR/C Actuator Set Tipper Tr.

This actuator set is designed to complement the Mercedes-Benz Arocs 3348 Dump Truck. When using a 4-channel transmitter, the dump feature of the trucks bed can be fully controlled.

Set Contents
• The ACU-01 Unit is a compact actuator unit for Tamiya R/C tipper/dump truck beds.
• The included geared motor (gear ratio = 64:1, size = Type 280) raises and lowers the truck bed via command from the ACU-01 unit, from a transmitter or the manual included switch.
• Limit switches ensure that the truck bed does not move beyond the defined range.
• Recommended for use with Tamiya 4ch Attack 2.4Ghz radio. Item 7255252
• Note: This product cannot be used together with Motorized Support Legs (Item 56505), as it uses the same R/C channel.
• This model can be used with standard ESCs, or the MFC-01 (Item 56511) and MFC-03 (Item 56523) multi- function control units.
• Compatible with 1/14 scale R/C tipper/dump truck models.

Article number: 300056523 Product: 1/14 Multi-function Unit MFC-03

The popular Multi-Function Control (MFC) unit for R/C tractor trucks, which adds a whole extra layer of realism to driving, receives an update. This unit allows transmitter trim levers to be combined with stick control use, meaning you can enjoy lights, sounds and vibrations coordinated with actions while driving your R/C tractor truck model. This version of the MFC features engine sounds which were recorded from a real European truck's L6 diesel engine for amazing realism.

About the MFC-03

• Features 33 different types of sound, including engine ignition and shutdown, horn, gear changes, brakes, air sound effects and so on. A 60mm-diameter full-range speaker in a resin case provides excellent quality.
• Up to 21 actions can be controlled using a 4-channel transmitter.
• Light operation and volume adjustment are also possible using the transmitter.
• Includes white, red and yellow high brightness LEDs to duplicate truck HID lights with precision.
• An ESC has been built in to the unit, enabling realistic running at very low speeds.
• The MFC unit can be run in three modes: R/C mode with Multi-Function (lights and sounds) off; Multi mode, with R/C and multi-function on; Demo mode, which allows display of lights and sounds only.
• Can be used for support leg operation when employing Item 56505 Motorized Support Legs.
• Cannot be used together with Item 53909 TLU-01 or Item 53937 TLU-02.
• Requires separately sold 4ch transmitter with slide trims, 4ch receiver and 2 servos (3 if using Item 56505) .

Article number: 300056511
Product: 1/14 Multi-function Control Unit MFC-01

About the Tractor Truck Multi-Function Control Unit

Tamiya presents incredible sound and action options for any 1/14 scale R/C Tractor Truck with the all R/C Tractor Truck Multi-Function Control Unit. This system, when mounted on the truck is located inside the cabin with speaker to the front and the MFC-01 unit to the rear. The control unit is mounted inside the left tool box for easy access.
An ESC has been built in to the unit, enabling realistic running at very low speeds.

A 4-channel R/C system activates all functions

By using your transmitter sticks and the trims you can control the truck movements (forward/backward running and turns), horn, motorized support legs (Item #56505) (sold separately), headlights, position lamps, roof lamps and speed indicators. You can also activate the back lamp, tail lamps and blinkers/hazard lamps as well as engine revving.

TR Multi-Function Control Unit

Article number: 300056364
Product: 1:14 RC Scania R470 Silver Edition

This is a special edition of the R/C Scania R470 truck (original: Item 56318), the stylish 4x2 model that depicts a vehicle belonging to Scania’s International Truck of the Year 2005 award-winning R Series. It is a great option for those without the time or confidence to apply a paint job to their kit, as cab parts come pre-painted in TS-17 Gloss aluminum, and given a urethane coating for a beautiful, lasting finish.

About the Model
• This is a 1/14 scale R/C model assembly kit. Length: 452mm, width: 187mm, height: 293mm.
• The classic form of the R470 is recreated accurately, complete with cab that tilts forward separately from fenders, just like on the full-sized truck. Cab, F, H, K, and M parts are molded in gray and pre-painted in Gloss aluminum (TS-17), with a urethane top coat for a stunning finish.
• Interior features such as seat and dashboard are depicted.
• 2-axle chassis utilizes ladder frame with aluminum side channels and resin cross members. Realistic drivetrain has a front mounted motor powering twin rear axles.
• 3-speed transmission can be controlled via 4ch R/C transmitter.
• Highly realistic suspension employs metal leaf springs.
• Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer.
• Compatible with a range of tractor truck option parts (TROP). Use with Multi-Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.

Article number: 300056362
Product: 1:14 RC Volvo FH16 Tow Truck 8x4

Our series of ultra-realistic 1/14 scale R/C trucks is a byword for fun, and offers a wide variety of different models and truck types. Now, it is to expand with another brand new type – the tow truck, which makes its living towing heavy duty vehicles such as tractor trucks. It promises a completely different element of enjoyment to predecessors in the series. The FH16 is marketed by Volvo, a renowned actor in the global commercial vehicle market. The FH Series includes a 750hp 16.1-liter turbocharged inline-6 engine FH16 Globetrotter 750 8x4 tow truck.
About the Model
• This is a 1/14 scale R/C model assembly kit. Length: 750mm, width: 195mm, height: 300mm. • Features a detailed molded plastic depiction of the cab, with photo-etched front grille and interior features.
• This model’s front axles feature the first twin steering system seen in the Tamiya 1/14 Truck series.
• The rear boom and underlift mechanism features plenty of metal components for excellent durability. Employ the new separately sold Actuator Set (Item 56553) to control them via R/C transmitter.
• Ladder frame has aluminum side channels and resin cross members. Power from the front motor is delivered to the two rear axles via propeller shaft. A built-in differential gear on each axle enables smooth cornering.
• Highly-realistic suspension utilizes metal leaf springs and friction dampers. The model enjoys easy driving thanks to the float-mounted die-cast front and reinforced resin rear axles.
• Three-speed transmission allows shifting via transmitter (only one gear is usable when towing).
• Headlights and taillights can be lit up with separately sold LEDs, and the model is compatible with Item 56523 Tractor Truck Multi-Function Control Unit "Euro-Style" (MFC-03).
• Compatible TROP truck option parts: 56523, 56531, 56538, 56548, 56549, 56550, 56551, 56553.

Warning notices:
Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.
When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.
Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).
Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Article number: 300056361
Product: 1:14 RC MB Arocs 3348 Tipper Red/Silver

This is a special edition of the R/C Mercedes Benz Arocs tipper truck (Item 56357), the stylish 3-axle truck with movable bed and distinctive bucket tooth grille. It is a great option for those without the time or confidence to apply a paint job to their kit, as parts come pre-painted in TS-8 Italian red (cab, H, K, and M parts) and TS-17 Gloss aluminum (rear bed and CC parts), and given a urethane coating for a beautiful, lasting finish.

About the Model
• This is a 1/14 scale R/C model assembly kit. Length: 576mm, Width: 190mm, height: 267mm.
• The Arocs 3348 form is recreated by an injection molded body, with separate side mirrors and visor, etc.
• Cab, H, K, and M parts are molded in red PS and pre-painted in Italian red (TS-8), while bed and CC parts are molded in gray ABS and pre-painted in Gloss aluminum (TS-17). All have a urethane top coat.
• The 3-axle chassis has a tough ladder frame with aluminum side channels and resin cross members.
• Truck bed section is comprised of metal subframe and resin panel sections for superb durability.
• Compatible with Electric Actuator Set (Item 56545) for realistic truck bed motion.
• TR mighty-tuned motor (35T) provides twin rear axles with ample power to carry loads in the bed.
• Rear tires, rear fenders and taillights have dedicated tipper truck model designs.
• 3-speed transmission can be controlled via a separately sold 4ch R/C transmitter.
• Metal leaf spring dampers with built-in coil springs provide durable suspension.
• Compatible with MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.

Article number: 300056360 Product: FH16 Timber Truck

The stable of Tamiya 1/14 scale R/C trucks welcomes a new type in this assembly kit model of a timber truck with long rear bed featuring distinctive frame and stakes for carrying logs. The model depicts the Volvo FH16 Globetrotter, a 750hp 16.1-liter turbocharged engine powered truck from the Swedish company’s flagship FH Series that underwent a full model change in 2012.

About the Model

• This is a 1/14 scale R/C tractor truck model assembly kit. Length: 733mm, width: 194mm, height: 306mm.
• The highly accurate body captures the FH16 Globetrotter form, with stainless steel photo-etched front grille, and cab interior details.
• Depictions of stakes (these are fixed to the model for safety purposes) and cab rear headboard use a durable combination of resin and metal.
• Assembly type 3-speed transmission allows gear changes via separately available 4-channel transmitter.
• Ladder frame features aluminum side channels with resin cross members.
• Power from the front-mounted motor is delivered to rear axles via propeller shaft. A built-in differential gear on each axle enables smooth cornering.
• Highly-realistic suspension utilizes metal leaf springs and friction dampers. The model enjoys easy driving thanks to the float-mounted die-cast front and reinforced resin rear axles.
• TR Mighty Tuned motor (35T) provides plenty of power, even when driving with loads.
• Printable templates for the creation of paper craft logs (for display only, not recommended for use when the model is driven) will be provided to agents, and available for download from www.tamiya.com.
• LED cables in Multi-Function Control (MFC) units are not compatible with this model. Customers will need to purchase separately available longer-cabled LEDs (Items 56549-56551) if using MFCs.
• Compatible option parts (TROP) include Items 56523, 56531, 56532, 56538 and 56548.

Warning! Not suitable for children under 14 years.

Article number: 300056359
Product: 1:14 RC Arocs 3363 (Light Gun Metal)

This is a special edition of the R/C Mercedes Benz Arocs (Item 56352), the super-stylish 3-axle truck with distinctive bucket tooth grille. It is a great option for those without the time or confidence to apply a paint job to their kit, as the cab, H, K, and M parts of the kit are pre-painted in Light Gun Metal (Tamiya Color TS-42), and given a urethane coating for a beautiful finish, and protection from damage.

About the Model

• This is a 1/14 scale R/C model assembly kit. Length: 529mm, width: 190mm, height: 267mm. The narrow body of the ClassicSpace variant Arocs 3363 is recreated accurately, complete with the distinctive "buckettooth" grille and headlight guards. Cab, H, K, and M parts are molded in gray, pre-painted in Light Gun Metal (TS-42), with a urethane top coat for a stunning finish. Photo- etched parts recreate cab rear platform.
• Interior features such as seat and dashboard are depicted.
• 3-axle chassis utilizes ladder frame with aluminum side channels and resin cross members. Realistic drivetrain has a front mounted motor powering twin rear axles.
• 3-speed transmission can be controlled via 4ch R/C transmitter.
• Highly realistic suspension employs metal leaf spring dampers and friction dampers.
• Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer.
• Compatible with tractor truck option parts (TROP) such as Items 56531, 56532, 56536 and 56538. Use with Multi-Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.

Article number: 300056356
Product: 1:14 RC Grand Hauler (Matte Black)

This is a special edition of Item 56344 Grand Hauler, the iconic North American big rig announced in 2015. It is a great option for those without the time or confidence to apply a paint job to their kit, as the body, H, P, and Q14/Q15 parts of the kit are
pre-painted Metallic black (Tamiya Color TS-40), and – in a first for the 1/14 R/C Tractor Truck series - given a matte coating which provides a cool look and protection from damage.

About the Model
• This is a 1/14 scale R/C model assembly kit. Length: 692mm, Width: 192mm, height: 330mm.
• The boxy, customized Grand Hauler form is a real eye-catcher. Body, H, P, and Q14/Q15 parts are molded in black, pre-painted in Metallic black (TS-40), and given a matte urethane top coat for a stunning finish.
• The matte paint job adds further emphasis to the numerous metal-plated parts, which include bumpers, radiator grille, roof-top horn and light bezel parts, side and kerb mirrors, air cleaners, mufflers and more!
• The tried and tested Tamiya 3-axle chassis utilizes a tough ladder frame with aluminum side channels and resin cross members. A realistic drivetrain setup sees the front mounted motor powering twin rear axles.
• 3-speed transmission can be controlled via a separately sold 4ch R/C transmitter.
• Metal leaf spring dampers with built-in coil springs provide durable suspension.
• Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer.
• Compatible with separately-sold Multi-Function Control Unit MFC-01 (Item 56511) (or MFC-03, Item 56523) for realistic LED lights and sounds.

Article number: 300056354
Product: 1:14 RC MB Actros 3363 (Pearl Blue)

This is a special edition of the Mercedes-Benz Actros 3363. It features pre-painted Body parts in Pearl Blue (Tamiya Color TS-89) for a cool look, with a durable coating applied to protect the paintwork from damage.

About the Mercedes-Benz Actros 3363 6x4 GigaSpace

This is a highly accurate 1/14 scale radio control model that recreates the Mercedes Benz Actros 3363 3-axle truck. The Actros series debuted in 2011 and was named 2012 Truck of the Year. Powered by a 15.6-liter inline-6 turbocharged diesel putting out a max of 630hp, the actual 3363 can haul up to 250 tons!
The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold 4-channel transmitter.

The Actros' realism can be further heightened with separately-available trailers that can be attached to its coupler and make the model over a meter in length!

Article number: 300056352
Product: 1:14 RC MB Arocs 3363 6x4 ClassicSpace

This 1/14 scale tractor truck recreates the Mercedes-Benz Arocs 3363 3-axle truck, which is the first narrow bodied European tractor model in the Tamiya Tractor Truck Series. The full-size subject is the German company's heavy duty tractor head that debuted in 2013. Powered by a 630hp 15.6-liter inline-6, the actual Arocs is capable of hauling massive loads of up to 250 tons.

The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold Tamiya 4-channel transmitter.

Article number: 300056348
Product: 1:14 RC MB Actros 3363 GigaSpace 6x4

This is a highly accurate 1/14 scale radio control model that recreates the Mercedes Benz Actros 3363 3-axle truck. The Actros series debuted in 2011 and was named 2012 Truck of the Year. Powered by a 15.6-liter inline-6 turbocharged diesel putting out a max of 630hp, the actual 3363 can haul up to 250 tons!
The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold 4-channel transmitter.

The Actros' realism can be further heightened with separately-available trailers that can be attached to its coupler and make the model over a meter in length!

Article number: 300056344 Product: 1/14 R/C Grand Hauler

Meet the latest addition to the 1/14 scale Tractor Trucks series! This model is based upon that Tamiya classic, the King Hauler (Item 56301). The King Hauler body is given an overhaul with numerous newly-designed parts inspired by the modern day trend of tractor truck customization. A number of metal and metal-plated resin parts further add to the mood of the model. Its longer frame gives the model proportions reminiscent of show trucks.

About the Model

• This is a 1/14 scale R/C model assembly kit. Length: 692mm, width: 190mm, height: 300mm.
• The realistic, lengthened body features newly-designed parts depicting front and rear bumpers, front grille, air cleaners and muffler covers. Muffler covers are made from metal tubing.
• Features a tough ladder frame construction with aluminum side channels and resin cross members. Realistic drivetrain setup sees the front mounted motor powering twin rear axles.
• 3-speed transmission can be controlled via 4ch R/C transmitter.
• Metal leaf spring dampers with built-in coil springs provide durable suspension.
• Newly-designed 1/14 scale driver figure included.
• Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer.
• Compatible with the tractor truck option parts (TROP) Items 56511, 56512, 56513, 56515, 56524, 56526 and 56530. Pair with Multi-Function Control Unit MFC-01 (Item 56511) and MFC-03 (Item 56523) for super-realistic LED lights and sounds.

Warning! Not suitable for children under 14 years.

Article number: 300056336 Product: 1/14 RC King Hauler Black Edition

This is a special edition of Item 56301 King Hauler, which was the first in the Tamiya series of 1/14 scale Tractor Trucks. The King Hauler was first introduced in 1993 and has been a favorite among R/C enthusiasts for many years. The body parts of this edition kit come pre-painted in Metallic Black straight from the factory floor.

Tamiya's Tractor Truck Series come with authentic suspension with leaf springs. Power is provided by a 540-size front mounted motor, and 3-speed gear changes are possible via a 4-channel transmitter. Tamiya's Tractor Trucks may be connected to separately-sold semi-trailers.
 

Warning! Not suitable for children under 14 years.

Article number: 300056335 Product: 1/14 RC Mercedes Benz Actros 1851 GigaSpace

The 2012 Truck of the Year award-winning Actros series is the flagship of the worlds leading truck manufacturer, Daimler. Its latest installment, the rear-wheel drive Actros 1851 GigaSpace runs on a 12.8-liter 6-cylinder turbo-charged engine generating 510hp and is used for long-distance haulage, heavy duty distribution haulage, construction haulage and so on.

The Tamiya 1/14 scale R/C kit faithfully captures all the detail of the full size rig using ABS plastic for the body parts and a 3-speed, shift on the fly working transmission.
 

Warning! Not suitable for children under 14 years.

Article number: 300056333 Product: 1/14 US Fuel Tank Trailer 2Axle "Gallant Eagle"

The Tamiya 1/14 scale Fuel Tank Trailer has been revamped! This fuel tank trailer features a newly-designed original and imagined livery that was inspired by fuel tank trailers seen in the United States. The chassis and tank parts are based on Item 56303.

Warning! Not suitable for children under 14 years.

Article number: 300056330
Product: 1:14 RC 40ft NYK Container Semi-Trailer

Nippon Yusen Kaisya (NYK) is one of the largest shipping companies in the world. This is the Tamiya replica in 1/14 scale and it is the second container model released in the Tractor Trailer R/C category.

The container features an aluminum frame with durable ABS front, top, and side panels. The well-known NYK logos are reproduced on the included vinyl sticker sheet, and the container can be detached from the semi-trailer after assembly. The 3-axle semi-trailer chassis comes with a realistically reproduced leaf-spring suspension. This semi-trailer can be connected to any Tamiya 1/14 R/C Tractor Truck and a variety of Option Parts can also be installed for enhanced realism.

Article number: 300056327 Product: 1/14 RC Scania R620 6x4 Highome blue painted

This is a special edition kit of the 1/14 R/C Scania R620 6x4 Highline. The kit includes body components that are pre-painted in Tamiya Synthetic Lacquer TS-51 Racing Blue paint. The body is also clear coated with a urethane clear topcoat.
 

Warning! Not suitable for children under 14 years.

Article number: 300056326 Product: 1/14 RC 40ft.Container Semi-Trailer Maersk

Cargo containers are used for shipping products and raw materials all around the world and ISO. This is a replica of a 40ft. regular height container which can be connected to any Tamiya's 1/14 scale Tractor Trucks.
 

Warning! Not suitable for children under 14 years.

Article number: 300056325
Product: 1:14 RC LKW MAN TGX 26.540 XLX 6x4 3Axle

The latest addition to Tamiya"s 1/14 scale R/C Tractor Truck series is the MAN TGX 26.540 6x4 XLX. This impressive truck, which made its debut at the 2007 European Transport Road Show in Amsterdam, was the winner of the 2008 Truck of the Year award. It features two rear axles which assist in the carrying of heavy loads over long distances. It is powered by an in-line 6 cylinder 12.4 liter turbocharged diesel engine which meets the stringent Euro 5 emissions standards to make it more environmentally friendly.

Warning! Not suitable for children under 14 years.

Article number: 300056323 Product: 1/14 RC EUTruck ScaniaR620 6x4 Highline Kit

Trucks are essential components of Article number: 300056323 Product: 1/14 RC EUTruck ScaniaR620 6x4 Highline Kitmany logistics networks around the world. One such truck which can be seen on the roads carrying large loads is the biggest and most powerful Scania truck, the R620. Tamiya is proud to add this wonderful piece of machinery the R620 6x4 to the 1/14 scale R/C Tractor Truck lineup. This massive tractor truck features 3-axle and is approximately 458mm long. Beautifully reproduced cabin tilts forward separately from the fenders, just like the actual truck. The accurately modeled fenders themselves are removable for realistically depicting a low carrying load. Realistic chassis and suspension further add to the imposing form of this unique model.

Warning notices:
Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.
When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.
Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).
Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Warning! Not suitable for children under 14 years.

Article number: 300056309 Product: 1/14 RC Truck Ford Aeromax Kit

The massive American rig has joined Tamiya's 1/14 scale tractor truck stable. Tamiya's model of the Ford Aeromax tractor truck boasts both large scale realism and authentic functions. Servo-shifted 3-speed transmission is mounted at the front of the aluminum ladder frame.
 

Warning! Not suitable for children under 14 years.

Article number: 300056043 Product: R/C M551 Sheridan w/Option Kit

Tamiya is delighted to announce another new addition to our ever-expanding series of super-realistic 1/16 scale R/C armor, in the shape of the rather unique M551 Sheridan. The M551 was designed as airdrop capable armor with wading capabilities, a key concept as the U.S. took on the role of global policeman post-WWII. With an aluminum hull and rolled steel turret, it weighed just 15 tons, but had impressive firepower in the shape of the M81 152mm gun/launcher, which could fire standard rounds and MGM-51 Shillelagh missiles. The M551 was in service with active units from 1968 to 1996, and saw action in the jungles of Vietnam.

About the Model

- This is a 1/16 scale R/C model assembly kit.
  Length: 408mm, width: 177mm, height: 186mm.
- The form of the lightweight M551 and its powerful M81 gun is
  captured with aplomb.
- Die cast components for suspension arms, sprocket wheels,
  idler arms and more; excellent durability.
- Utilizes an aluminum gun barrel for superb accuracy.
- Offers a full range of movement: forward and reverse, a variety
  of turns, turret rotation and gun elevation. Suspension features a
  coil spring for each of the 10 suspension arms, giving the model
  excellent mobility.
- Firing of the main gun is accompanied by an LED flash,
  realistic recoil, and vehicle kickback. Machine gun also produces
  LED flashes when fired.
- Authentic engine and firing sounds were recorded from a full-size
  vehicle and are coordinated with model actions. A large speaker in
  the model ensures rich sounds.
- Turret upper section is secured by magnets, allowing hassle-free
  access to the electronics within.
- A plethora of lights are recreated, including the turret front
  searchlight. They can be operated via transmitter.
- Assembled link type tracks have elastomer recreations of the rubber
  pads for an authentic look. Multi-Function Unit Battery & Charger
  Transmitter Motors

Warning! Not suitable for children under 14 years.

Article number: 300056041 Product: 1:16 RC US MBT M1A2 Abrams Full Option

The latest super-realistic model in the 1/16 scale R/C Big Tank Series recreates that modern day U.S. stalwart, the M1A2 Abrams. The Abrams has been around since the early 1980s, with constant upgrades to ensure that it stays at the cutting edge of military technology. M1A2s were introduced from 1992, developed to be chock full of front-line technology and bring the M1 into the digital age. They featured depleted uranium armor, a modified commander’s cupola and more, and saw action in the conflict in Iraq in 2003.

About the Model
• This is a 1/16 scale R/C model assembly kit. Length: 615mm, width: 231mm, height: 190mm.
• Expertly recreated angular Abrams form includes depictions of anti-slip surface textures.
• The chassis is powered by a gearbox with Type 540 motors and features metal parts such as lower hull, suspension arms, drive sprockets and more, for excellent durability.
• Aluminum gun barrel has traverse and elevation/depression movement, thanks to a servo and Type 130 motor.
• Multi-Function Unit is made up of turret and vehicle control units. It allows control of various movements via separately sold transmitter. These include turret rotation and gun elevation. It also ensures that a range of realistic sound and light effects (headlights, taillights, barrel flash) are paired with model actions.
• Gun barrel control system can train the main gun in a single direction, which it remains pointed in even as the tank moves or climbs, and the turret rotates.
• The included dual speaker offers highly realistic sounds.
• Durable resin pre-assembled tracks feature metal pins and connectors.
• Compatible with the Battle System (Item 53447) for fun and interactive battles with friends!
• Requires a 4-channel transmitter with self-neutral function, battery pack and transmitter batteries.

Warning! Not suitable for children under 14 years.

Article number: 300056020
Product: 1:16 RC Panzer Leopard 2A6 Full Option

Widely recognized as the best modern day Main Battle Tank (MBT), Tamiya introduces the latest German Leopard 2 tank, the Leopard 2 A6, to the 1/16 scale R/C tank series. Tamiya's biggest R/C tank ever, it's just like driving the real thing!

About the Leopard 2 A6

Used by more than 10 European nations, Germany's Leopard 2 tanks are a perfect balance of firepower, protection, mobility and availability. With the Leopard 2A5 regarded as the most powerful tank in the world with superior protection and fire power, the latest Leopard 2, the 2A6, features an even more powerful weapon system. The Leopard 2A5 featured replaceable wedge shaped armor on the turret, improved PERI-R 17 panoramic Commander's sight with thermal vision, spall liner on the turret interior for protection against splinters, all-electric gun control and stabilization system for easy maintenance and reduced noise, GPS navigation system, electro-pneumatic driver's hatch and a CCD camera mounted on the rear of tank for high-speed reversing. The Leopard 2A6 featured improved firepower including a 55 caliber 120mm smoothbore main gun utilizing kinetic energy LKE II ammunition for higher muzzle speed and lethality. The 2A6 has been employed by the German 403 tank battalion since March 2001, and is scheduled to replace all German 2A5 tanks by 2006. The use of the 2A6 continues to spread throughout Europe with the Netherlands, Spain and Greece adopting the 2A6 for their main battle tank. With continued improvements the 2A6 continues to set new standards as the world's best MBT.

R/C Leopard 2 A6 w/Option Kit

Warning! Not suitable for children under 14 years.

Article number: 300056018
Product: 1/16 RC Panzer Königstiger Full Option

Tamiya continues to develop its 1/16 R/C Tank Series. The fourth full-option kit to make its appearance is the German Heavy Tank King Tiger. Not only can the model move forward and backward and turn with a great sense of power, but the turret can be rotated and the 88mm gun raised and lowered. To imitate the firing of the main gun and of front machine gun, light flashes while sound is heard. The sound of the engine has been recorded, with the assistance of the French museum of Saumur, from a real Maybach HL230-P30 engine of the only King Tiger kept in working condition in the world. Not only all stages of engine sound (idling through full throttle) but also all the metallic clanking of the tank tracks have been thoroughly recorded.

During the second half of WWII, Zimmerit coating was applied on German tanks to protect them from the threat of magnetic mines. For this kit, the Zimmerit coating has been replicated with a unique relief printed seal. Thanks to this seal, you can now represent accurately a late war King Tiger with great ease.

About the German King Tiger (Henschel Turret)

The German Heavy Tank King Tiger made its appearance during WWII in 1944. The chassis front armor was 150mm thick with 80mm thick side armor and powered by a 700hp Maybach HL230-P30 engine. The Henschel and Porsche companies came up with rival turret prototypes. The first 50 tanks produced had Porsche turret whereas subsequent tanks were equipped with the Henschel designed production turret that featured many improvements over the first model. The King Tiger was armed with a 71-caliber 88mm gun that had enough power to pierce 150mm thick armor from 2000m away. Between The beginning of production in Summer 1944 and March 1945, 440 units were completed. Due to the havoc wreaked by the King Tiger during the final German offensive on the Ardennes front in December of 1944

R/C KING TIGER w/Option Kit

Warning! Not suitable for children under 14 years.

Article number: 30006010
Product: 1/16 RC Panzer Tiger 1 Full Option

Tamiya has put incredible power and versatility of the German Tiger I in your fingertips with this 1/16 scale, fully functional R/C tank. Just some of the many functions this tank is capable of have been recorded in the video clips below. First check out the firing of the main cannon, complete with true to life flash and cannon recoil. The shot is so powerful that it actually causes the tank itself to recoil, just like the full size Tiger I. Then, click on the next image to see the cannon rotate, tracking down the enemy and preparing to fire. Next is the firing of the authentically recreated 7.92mm MG34 machine gun! Finally, take a gander at how the Tiger I moves on its durable resin and metal tracks.

*1/16 scale Radio Controlled Assembly Model Kit (overall length: 530mm, overall width: 232mm)
*A four-channel RC unit is necessary to operate this kit. Two 7.2V Tamiya Racing Packs (or equivalent) and charger are also required.

Powerful Engine Sound

Just about every sound the real Tiger I made can be made on Tamiya's 1/16 scale Tiger I. When the tank is switched on, either a manual crank start sound, or an automatic engine start sound is heard. After your engine is turned over, its time to move the tank around. As you accelerate, the engine thundering increases just like the real Tiger I. Stop the tank, and the sound of authentic idling begins. Once you have located your target, rotate the massive turret and listen to the grinding of gears of the real German war machine. The more you control this R/C tank, the more you will feel like the commander of the full size Tiger I !


The front-mounted gearbox contains two Type 380 motors that can operate together or individually to produce forward/reverse running and pivot turning. Metal torsion bars and suspension arms combine with the wide tracks to smoothly absorb bumps and dips in th

R/C Tiger I Early w/Option Kit

Warning! Not suitable for children under 14 years.

Article number: 300047453
Product: 1:10 RC VW Bus Type 2 T1 Flower Power

Add some peace and love to your R/C life with this new color variation of our Type 2 (T1) model that turns it into a veritable Hippy wagon! The model is based upon the proven 2WD M-05 chassis.

About the Model
• This is a 1/10 scale R/C model assembly kit. Length: 426mm, width: 195mm, height: 177mm.
• The form of the 23-window Type 2 T1 bus is masterfully recreated in polycarbonate and pre-painted in PS-3 Light blue, with separate molded plastic parts included to create bumper, light cases and side mirrors.
• A brand new sticker sheet with hippy-inspired designs is included to decorate the body.
• The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity.
• This model uses the 239mm L wheelbase.
• Comes with marking stickers to decorate the body.
• The M-05 has a wide range of Hop-Up Option parts available to tune it.

Article number: 300047438
Product: 1:10 RC Super Storm Dragon

This assembly kit is a real treat for fans of both classic R/C models and cartoons, as the Super Storm Dragon (previously known as the Super Dragon in Item 50364) is released in a kit with a chassis for the first time! The Super Dragon appeared in the classic 1980s Japanese comic "R/C Boy" and gained a big following in both plastic and print.

Item Contents/Information
• This assembly kit creates the Super Storm Dragon, a nimble R/C buggy at home on- and off-road. Length: 410mm, width: 230mm, height: 130mm.
• The lightweight and rigid Hornet chassis design utilizes engineering plastic bathtub frame, suspension arms, bumper and more.
• The front has a coil-sprung independent swing axle suspension setup, while the rear rolling rigid axle suspension employs oil dampers.
• A rear differential provides smooth cornering and is protected from dust and dirt in its sealed gearbox.
• Features three-piece assembly wheels molded in white.
• Front grooved tires and high-grip rear spike tires facilitate super handling.
• The body is molded in lightweight and durable polycarbonate, pre-cut and pre-painted in white.

Article number: 300047413
Product: 1:10 RC Subaru Brat Blue

Great news for fans of Tamiya classics, with the announcement of this special Blue Version of the timeless Subaru Brat, a model which originally appeared as Item 58038 back in 1983, and then as the revamped Item 58384! The Brat (known by other names outside North America) was made solely for export by Subaru, and proved a big hit in 1970s America in particular.

About the Model
• This is a 1/10 scale R/C model assembly kit. Length: 453mm, width: 220mm, height: 175mm.
• Features two different versions of the body – one is injection molded blue resin, and the other vacuum molded lightweight and durable polycarbonate. Both recreate the classic Brat form in style.
• Chassis parts are molded in gray specially for this model.
• Chassis design is the same as that on the 2007 update (Item 58384) – a 2WD unit developed for use with the included Type 540 motor, which provides smooth power via the 3-bevel differential.
• Features 4-wheel independent suspension with front double wishbone and rear trailing arm setups. The rear uses diaphragm type oil dampers and coil springs.
• 3 different pinion gears (49T, 50T and 52T) are included.
• Block pattern tires are mounted on 8-spoke wheels.
• Comes in the same packaging as Item 58384, with a special "Blue Version" sticker on the box.

Article number: 300047392 Product: P34 1977 Monaco Special Edn PB

Tamiya is delighted to announce the re-issue of this classic body, this time with a souped up chassis and slightly updated markings! The model was last released as Item 84263 back in 2012. It depicts the unique 6-wheeled Tyrrell P34 which was raced at the 1977 Monaco GP, and had different rear wing and engine covers to the car which raced at the Japan GP. The model runs on the same specially hopped-up F103 6-wheel chassis which was previously used on Item 47359.

Hop-Up Option Parts included

- Friction Damper Grease (53176)
- TRF Special Damper (53901)
- Low-Friction Pads (54138)
- Carbon Reinforced F Uprights (54154)
- Torque-Tuned Motor (54358)
- Hi-Torque Servo Saver
- Sponge Tires

About the Model

- This is a 1/10 scale R/C assembly kit. Length: 430mm, width: 204mm - Features an accurate multi-piece polycarbonate body. Body, driver torso, mirror sections, rear wing, oil cooler and other aero parts come pre-painted for a simpler assembly process.
- Body cockpit and rear sections are pre-cut. - A specially-modified version of the F103 is used, which provides 6-wheeled driving fun! The half double deck frame utilize 1.5mm thick upper and 2.5mm thick lower FRP plates.
- Kingpin coil spring 4-wheel independent front suspension uses one-piece lower arm and separate left/right upper arms. The front 4 wheels are steerable, just as on the real racing car.
- The rear suspension features an FRP T-bar with TRF damper and low friction pads.
- Efficient direct-drive setup has the spur gear powered directly by the pinion.
- A built-in ball differential gives limited slip effect.
- Stickers are included to recreate the sponsor logos and other markings on the car, including Goodyear logos which were not depicted in Item 84263.
- Torque-tuned motor included for high-level performance.

Warning! Not suitable for children under 14 years.

Article number: 300047374
Product: Ferrari 312T3 (F104W)

The Ferrari 312T3 returns! Not seen since 1991, this special limited-edition release has been re-imagined on the Tamiya F104W F-1 chassis.

The 312T3 made its debut in the 1978 South African Grand Prix. Underneath its aerodynamically polished body with a 3-liter 12-cylinder 510hp engine. Drivers C. Reutemann and G. Villeneuve took the 312T3 to 4 victories for the season and the runner-up spot in the 1978 Constructors’ Championship.

• 1/10 scale R/C model assembly kit. Length: 447mm, width: 201mm.
• Polycarbonate & ABS body parts. It features a bumper to go under the front wing, and a helmeted driver figure.
• Wings and wheels are metal plated.
• Bonus body! A separate standard polycarbonate body is also included in the kit.
• The F104W chassis has F103 front suspension arms to replicate the wide form of the 312T3. It utilizes an FRP semi-double deck (upper: 2mm, lower: 3.2mm) and longitudinal battery position.
• Highly efficient direct drive 2WD features the motor pinion directly connected to the spur gear which has a built-in ball differential.
• Gear case allows 5 different ground clearances.
• Kingpin coil spring front and T-bar rear suspension setups provide smooth and precise driving characteristics.
• 2 car markings: (Nos.11 and 12 included).
• Requires: R/C equipment (transmitter, servo, ESC), battery pack with charger and Tamiya PS spray paint to complete.

Warning! Not suitable for children under 14 years.

Article number: 300047348
Product: 1:10 RC The Grasshopper'05 Candy Green

Tamiya is delighted to announce the re-issue of this popular kit under a new Item number. It was last released in 2012 as Item 84331. Please note that the contents of the kit remain the same.

About the Model
• This is a 1/10 assembly kit. Length: 389mm, width: 223mm, height: 135mm
• Durable plastic body is pre-painted in Candy Green. It is screw-fastened to the chassis, creating a solid frame that can absorb any type of rough terrain.
• Rear wheel drive chassis features a durable bathtub frame, independent swing axle front and rigid axle rear suspension, and friction dampers.
• Sealed gearbox is equipped with a differential.
• Paddle style rear tires and grooved front tires combine with 3-piece assembly type wheels for excellent grip on dirt tracks.
• A Type 540 motor can also be installed for a more powerful drive.

Article number: 300047329
Product: 1:24 RC Metal Dump Truck chrome (GF-01)

This is a re-issue of a special kit that took the Heavy Dump Truck (Item 58622) and gave it a new look! The livery design concept is based upon the heavy metal style - with Japanese metal bands enjoying popularity in recent years, it's a hot genre. The body parts are molded in black, with metal-plated chassis parts and new coordinated sticker designs. Click here to see this product on the Tamiya official homepage.
About the Model
• This is a 1/24 scale 4WD R/C model assembly kit.
• Realistic cab and rear bed are injection-molded black plastic.
• Alternate rear bed between flat and raised positions by changing the position of the two stays and snap pins in the body mounts. Please note that it is not advised to put objects in the rear bed, or drive the model with it raised.
• Metal-plated wheels are paired with 115mm-diameter tires.
• The 4WD GF-01 chassis monocoque and F parts (stays, bumper, wheelie bar, etc.) are metal-plated. The sealed gearbox is integrated into the frame, while the built-in differential gears provide smooth cornering.
• 4-wheel double wishbone suspension has friction dampers.
• The 'square' setup chassis uses similar tread (194mm) and wheelbase (174mm) lengths.
• Torque-tuned motor is included in export version only.

Article number: 300047326
Product: 1:10 RC TT-02R Chassis Kit

This chassis kit gets a further limited edition re-issue - it was last produced in Autumn 2016. This refined, racespec TT-02 chassis has a wide range of option parts and components to make it ready to race! Of course, it retains the TT-02's versatility and easy drive.

Featured Components:
Aluminum Rear Uprights (3-Degree Toe-In)
Aluminum Motor Mount
TT-02 Alu. Propeller Joints
TT-02 Aluminum Propeller Shaft
TT-02 Full Ball Bearing Set
3x18mm Alu. Turnbuckle Shafts
Medium-Narrow Racing Slick Tires
5mm Ball Connectors
CVA Oil Dampers & Springs
Metal Drive Shafts, Wheel Axles and Gearbox Joints
4mm Aluminum Flange Lock Nuts (Blue)
5mm Aluminum Short Ball Connector Nuts (Blue)
5mm Aluminum Ball Connectors (Blue)

About the Model
• This is a 1/10 scale R/C chassis assembly kit. Length: 376mm, Width: 182mm.
• Aluminum rear uprights provide 3 degrees of toe-in for greater stability when cornering.
• Motor mount, propeller shaft and joints are also lightweight and tough aluminum.
• Greater efficiency is achieved in the drivetrain with aluminum center shaft and cup.
• Silver high-performance CVA oil dampers are paired with cool black springs.
• Comes with stylish 10-spoke wheels and slick tires.
• Body, battery pack, motor and R/C equipment are not included.

Article number: 300046703
Product: 1:10 RC X-SA Hornet

Another true Tamiya classic joins the new X-SA series in the form of the Hornet, a childhood dream for many early R/C fans and still a highly popular model in the modern day.

About the Model
• This is a 1/10 scale finished R/C model. Length: 400mm, width: 230mm, height: 150mm. Wheelbase: 251mm.
• Finished polycarbonate body and wing are pre-painted in black, and have the iconic Hornet livery stickers applied.
• The chassis comes ready-assembled.
• Independent swing axle front suspension utilizes friction dampers, while rolling rigid axle rear suspension is fitted with oil filled dampers.
• Sealed rear gearbox protects diff gear during off-road running.
• Requires separately sold R/C equipment, battery pack and charger.

Art.Nr.: 300046702
Product: 1:10 RC X-SA Racing Fighter (DT-03)

Another new subject joins the new X-SA series, and it’s a modern classic: the Racing Fighter (original kit was Item 58628). The model is based upon the stylish, slimline DT-03 chassis.

About the Model
• This is a 1/10 scale finished R/C model. Length: 400mm, width: 244mm, height: 134mm.
• Polycarbonate body and wing are pre-cut and pre-painted, with marking stickers applied.
• Ribbed front and square spike rear tires ensure an accomplished off-road drive.
• The DT-03 uses a tough monocoque frame. Big wheelbase (287mm) and tread (front: 221mm, rear: 208mm) measurements give it great performance on- and off-road!
• Front arms have 25-degree skid angle for great off-road driving.
• Features a sealed rear gearbox with internal gear differential unit, plus a dust cover for R/C equipment.
• A wide range of option parts is available to tune and customize your DT-03 chassis car.
• Requires separately sold R/C equipment, servo, battery pack and charger.

Article number: 300046701
Product: 1:12 RC X-SA Lunch Box

The first classic Tamiya model to join the brand new X-SA series is the Lunch Box, favored basher of many an R/C fan and offering an all-around fun 2WD drive on those iconic bulging tires!

About the Model
• This is a 1/12 scale finished R/C model. Length: 385mm, width: 290mm, height: 225mm. Wheelbase: 207mm.
• The classic Lunch Box body is molded in styrene plastic in the original yellow, with the now legendary markings already applied.
• Yellow wheels are paired with 115mm tires for some serious off-road capacity.
• The durable and easy-to-assemble 2WD chassis features a box type frame with front swing arm independent and rear rolling rigid suspension setups.
• A pre-assembled, sealed gearbox protects the diff gear from sand and other intruding debris.
• Features a rear wheelie bar for wild wheels-in-the-air driving.
• Requires separately sold R/C equipment, battery pack and charger.