This website uses cookies. By using the services of this website you consent to the usage of cookies.
OK
 

RC On-Road 2/4 WD

M-07R Chassis Kit

SKU: 300084436

Article number: 300084436 Product: M-07R Chassis Kit

This R/C FWD chassis kit takes the revolutionary M-07 Concept and pairs it with a range of option parts, selected by the Tamiya Racing Factory (TRF) team for a racing setup. This is a great value-for money option for those who want to get straight into racing, or achieve a race-spec car without having to select Hop-Up Option and Spare parts themselves.

Featured Components

- M-07 Concept High-Traction Lower Deck (54812)
- TRF Special Damper (Hard Black Coating) (42102)
- M-07 Concept Reinforced C Parts (Uprights) 2pcs. (54810)
- M-07 Concept Reinforced D Parts (Suspension Arms) 2pcs. (54811)
- 33mm Double Cardan Joint Shaft (2pcs.) (42312)
- Clamp Type Aluminum Wheel Hub (5mm Thick) (53823)
- Rear Stabilizer
- Aluminum Cup Joint for TA06 Gear Differential Unit (2pcs.) (54532)
- Hard Fluorine Coated 0.6 Aluminum Pinion Gear (20T) (53509)
- φ2.6mm Titanium Coated Suspension Shaft Set for Reversible Suspension (53917)
- 46mm Titanium Coated Suspension Shafts 2pcs. (53851)
- 3x106mm Aluminum Turnbuckle Shaft (54756)

About the Model

- This is a 1/10 scale R/C chassis assembly kit. Length: 332mm.
- Includes dedicated carbon fiber battery holders developed for this product.
- The chassis has superb rigidity thanks to reinforced upright and suspension components, as well as a hightraction lower deck.
- A highly efficient drivetrain employs 33mm double cardan joint shafts and aluminum joint cups, plus a durable fluorine coated aluminum 20T pinion gear.
- Highly agile suspension utilizes TRF Special Dampers, rear stabilizer and titanium coated suspension shafts.
- Also included are aluminum hex hubs and 3x106mm turnbuckle shaft.

 

Warning! Not suitable for children under 14 years.

P34 1977 Monaco Special Edn PB

SKU: 300047392

Article number: 300047392 Product: P34 1977 Monaco Special Edn PB

Tamiya is delighted to announce the re-issue of this classic body, this time with a souped up chassis and slightly updated markings! The model was last released as Item 84263 back in 2012. It depicts the unique 6-wheeled Tyrrell P34 which was raced at the 1977 Monaco GP, and had different rear wing and engine covers to the car which raced at the Japan GP. The model runs on the same specially hopped-up F103 6-wheel chassis which was previously used on Item 47359.

Hop-Up Option Parts included

- Friction Damper Grease (53176)
- TRF Special Damper (53901)
- Low-Friction Pads (54138)
- Carbon Reinforced F Uprights (54154)
- Torque-Tuned Motor (54358)
- Hi-Torque Servo Saver
- Sponge Tires

About the Model

- This is a 1/10 scale R/C assembly kit. Length: 430mm, width: 204mm - Features an accurate multi-piece polycarbonate body. Body, driver torso, mirror sections, rear wing, oil cooler and other aero parts come pre-painted for a simpler assembly process.
- Body cockpit and rear sections are pre-cut. - A specially-modified version of the F103 is used, which provides 6-wheeled driving fun! The half double deck frame utilize 1.5mm thick upper and 2.5mm thick lower FRP plates.
- Kingpin coil spring 4-wheel independent front suspension uses one-piece lower arm and separate left/right upper arms. The front 4 wheels are steerable, just as on the real racing car.
- The rear suspension features an FRP T-bar with TRF damper and low friction pads.
- Efficient direct-drive setup has the spur gear powered directly by the pinion.
- A built-in ball differential gives limited slip effect.
- Stickers are included to recreate the sponsor logos and other markings on the car, including Goodyear logos which were not depicted in Item 84263.
- Torque-tuned motor included for high-level performance.

 

Warning! Not suitable for children under 14 years.

TA07 MS Chassis Kit

SKU: 300042326

F104 PRO II w/Body

SKU: 300058652

Article number: 300058652 Product: F104 PRO II w/Body

Power up your R/C formula racing life with this kit, which pairs the lightweight and streamlined direct drive F104 chassis with a new lower deck, and upgrade parts, giving a sharp and responsive drive. An all-new original body is also included!

About the Model
• This is a 1/10 R/C model assembly kit. Length: 440mm, width: 180mm, height: 88mm, wheelbase: 270mm.
• The lightweight F104 chassis is fitted with various upgraded parts to turn it into the F104 PRO II.
• FRP double deck chassis has a new lower deck design, and an inline (longitudinal) battery position.
• The 1.5mm thick FRP T-bar design with U-shaped cutaway is inherited from the F104WGP. It makes up the rear suspension in concert with friction plates and a TRF damper.
• Features front independent coil spring suspension. Alter camber by changing upper mount attachment direction.
• Utilizes an aluminum ball differential. Rear wheels can be changed without its being dismantled.
• A realistic original polycarbonate body is included. Its design is inspired by 2017 trends, with a sharp, slanting nose and bulging side pontoons. Additional parts are included to create alternative lower side pontoon sections as separate parts for chassis with larger R/C equipment.
• Separate parts depict the complex front wing and its low rear counterpart, rear diffuser, mirrors, helmet, etc.
• Comes with realistic semi-pneumatic synthetic rubber tires, and marking stickers to decorate the body.
• A wide range of Hop-Up Option parts are available to further tune the chassis to your needs.
 

 

Warning! Not suitable for children under 14 years.

TA07 PRO Chassis Kit

SKU: 300058636

Article number: 300058636 Product: TA07 PRO Chassis Kit

The TA series of mid-range touring car chassis has been running since 1991, and is a great option for racers, plus those ready to take the step up from entry level chassis such as the TT model series. Now it receives an update with this brand new model - the TA07 PRO chassis, which is the first new-number variant since the TA06 in 2011. It utilizes a new composite layout, fused with proven part designs from the top-class TRF419 chassis suspension. As a result, the chassis features highly optimized flex characteristics, plus tried and trusted drivetrain parts in a fresh 1 belt-driven setup.

Featured Parts:
TRF419 design Uprights
TRF419 design Suspension Arms
TRF419 design Gear Differential Units
TRF Dampers Universal Drive Shafts

About the Model

• This is a 1/10 scale R/C chassis assembly kit. Uses a composite lower deck/upper frame setup, as opposed to the TA06's monocoque. Lower deck and side frame parts are integrated, while upper frame center brace and F/R stiffener parts are separate.
• Slimline lower deck piece features a skid-shaped underside to minimize contact with the track surface.
• Single belt-driven 4WD provides efficient acceleration. Drivetrain utilizes 8 ball bearings.
• The motor can be switched between one of three positions, each with its own performance characteristics.
• Utilizes race-proven TRF419 suspension, steering parts (same Ackerman geometry) and gear diff units.
• For those who can't wait to soup up or tweak the chassis even further, Hop-Up options are going on sale soon.
• Includes universal drive shafts, adjustable battery holder and TRF dampers. Battery is inserted from chassis side.

 

Warning! Not suitable for children under 14 years.

Impreza Monte-Carlo 99 (TT-02)

SKU: 300058631

Article number: 300058631 Product: 1/10 Impreza Monte-Carlo 99 (TT-02)

The TT-02 chassis line-up is Tamiya's entry level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7).

The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance.

Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

 

Warning! Not suitable for children under 14 years.

Mazda MX-5 (M-05)

SKU: 300058624

Article number: 300058624 Product: 1/10 Mazda MX-5 (M-05)

This R/C assembly kit model recreates the 4th generation of the Mazda MX-5 (also known as the Roadster in Japan and the Miata MX-5 in the U.S.), the iconic car with a heritage dating back to 1989 and total sales in excess of 950,000. The dynamic and lightweight car was made to amplify the thrill of driving, with a punchy 1.5-liter (2.0-liter in North American market cars) inline 4-engine and 6-speed transmission, while including modern must-haves such as advanced safety equipment.

The Tamiya R/C model faithfully captures the fun and maneuverability of the real life subject as it comes on the proven M-05 M-chassis platform. The M-05 is a simple to build FWD (front wheel drive) machine, which allows for plenty of after-market parts to be outfitted as you grow with your skill. The lightweight, narrow semi-monocoque frame offers an optimized weight distribution and a low center of gravity. A ground-hugging 4-wheel independent double wishbone suspension and a 3-piece steering linkage ensure excellent stability during high-speed cornering.

Three wheelbase lengths (210mm, 225mm, 239mm) are possible by simply switching the position of the rear suspension parts, enabling a wide range of body choices available from Tamiya.

Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

 

Warning! Not suitable for children under 14 years.

1:10 RC Toyota Supra Drift Spec TT-02D

SKU: 300058613

Article number: 300058613 Product: 1/10 R/C Toyota Supra (TT-02D) Drift Spec

One of the most recognized Japanese sports cars around the world, the Supra has left its mark both on the race track in the hands of pro drivers and on the streets in the hands of enthusiasts. Now, the Tamiya model (original release: Item 58392) is given a new release on the new Tamiya drift unit, the TT-02D chassis.

About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive form is captured faithfully by the polycarbonate body. • Features separately-molded side mirror and rear wing parts. • Includes carbon pattern decals for engine hood and rear wing. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires on metal-plated mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58392.

Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

 

Warning! Not suitable for children under 14 years.

1:10 RC Subaru BRZ R&D Sport 2014 TT-02

SKU: 300058607

Article number: 300058607 Product: 1:10 RC Subaru BRZ R&D Sport 2014 TT-02

The latest model to appear in the expanding TT-02 chassis line-up is this version of the R&D Sport-run Subaru BRZ, a car entered in the GT300 class of the Japanese Super GT series. While the car retains the general atmosphere of the road-going BRZ, it has been significantly modified for the racing series, with a racy wide and low form. Subaru’s motorsports arm STI tuned the 2-liter 4-cylinder boxer, which has an output of 350ps and impressive torque of 45kgf·m. The car enjoyed positive progress in the 2014 season with a number of promising qualifying performances leading to improved results later in the year. This model recreates the car as it appeared in Round 2 of the season in Fuji.

Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-02 entry level touring car chassis. The TT-02 chassis platform is the successor to the TT-01 as it incorporates many new features to make it even easier for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Ho-Up-Options available to increase the cars speed and performance.

Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

 

Warning! Not suitable for children under 14 years.

1:10 RC NISMO R34 GT-R Z-Tune (TT-02D)

SKU: 300058605

Star Unit Dancing Rider T3-01

SKU: 300057405

Article number: 300057405 Product: Star Unit Dancing Rider T3-01

Lord of the Dance This R/C model assembly kit creates the Dancing Rider, a supremely fun 3-wheeled model that offers an exciting lean when cornering. An original body is included with the kit, and was designed under the supervision of famed Japanese artist Atsushi Arino. It is molded in lightweight polycarbonate, and comes with a molded driver figure for an extra touch of fun.

T3-01 Chassis: Designed for Fun The T3-01 is a three-wheeled chassis comprised of two main sections (front and rear) connected by a center link; the front section houses R/C equipment and the power source, while the rear holds the integrated gearbox and motor. Positioned in the back of the front section, the servo applies motion to the rear section, which in turn makes the front lean. Support arms are moved by the servo, and help the model to self-right in the event that it turns onto its side. At the front, a telescopic fork has a built-in coil spring, while the rear features a cam-slide setup with cams on the rotating pitch axis: sliding left and right, they actuate the built-in coil spring to cushion the rear. A planetary differential gear is integrated into the rear axle.

Features: ★Length: 260mm ★Width: 135mm ★Height: 175mm ★Wheelbase: 196mm ★Tread (Rear): 91mm ★Tire Width/Diameter 21/61mm (Front), 25/59mm (Rear) ★Monocoque Chassis ★Rear-Wheel Drive ★Planetary Differential Gear ★Front Suspension: Telescopic Fork ★Rear Suspension: Cam-Slide ★Gear Ratio = 10.7:1 ★Requires an Electronic Speed Controller (sold separately) ★Type 370 Motor included

Separately Required Items ★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Power source

 

Warning! Not suitable for children under 14 years.

to the top