5 22

Sort by:

Top sellers
  • Top sellers
  • New
  • Price ascending
  • Price descending
Filter

Filter
Price
Category
Brand
Brands & licenses
Scale
1:35 WWII Ger.SdKfz.171 Panther A (2)

1:35 scale

1:35 WWII Ger.SdKfz.171 Panther A (2)

300035065

€21.99

Article number: 300035065 Product: 1/35 WWII Dt. SdKfz.171 Panther A (2) In the beginning of 1942, in order to fight against the T-34, the German military ordered a new tank from Dymler-Benz and M.A.N. companies with the following specifications: Weight- 35 tons; speed- 60 km/h; armament 75mm long gun and armour, 60mm thick in front hull, 35mm thick in the rear and 100 mm at the front of the gun turret. Lastly, it was specified that the tank be equipped with a Maiback HL210, water-cooled, V-type 12 cylinder engine. In May of the same year, M.A.N.'s model was chosen without waiting for completion of a prototype tank. However, there were 2 important modifications. First, in order to meet the military's demand, considerably more than the original 35 ton weight was needed. Second, the military ordered a change in the thickness of the frontal armour from 60mm to 80mm. Because of these changes, the engine type had to be chanded from HL210 to HL230. Then, in order to accommodate this engine, a much better gear was needed, but mass production began without this last change, which resulted in frequent gear malfunctions and related trouble. This became the Panther's greatest defect. In the same year, Dymler-Benz and Henschel were ordered to produce the Panther. Therefore, production was greatly increased and a total of 6283 Panther Tanks were produced, second only to P2KW-4 in number. The first mass produced Panther type D was not equipped with a machine gun but after the experience of close battle. A 7.92mm MG 34 was added to the Panther's right front hull armament beginning with its type A. The special feature of the Panther was the left and right driving mechanism. This created an interchangeability of movements, using the torsion bar system. By 1944, the Panther was further improved from Type A to Type G with a change in its side shape. The Panther continued its activities against the Allied Forces throughout the latter half of the war. One of the famed battles it waged during this latter period probably is the one against the new Soviet JS II heavy tank on the eastern front. The Panther at that time, was the main strength tank of the Gross Deutschland, the strongest German Mechanized Division, under the command of General Hasso Von Manteuffel. The Panther reportedly destroyed 350 JS II tanks and 20 other armoured vehicles in the battle. It was a complete one-sided victory for the Panther and one for the book of military history. The Panther, therefore, was an extremely balanced tactical tank and should be called a masterpiece destined to bear the last glory of German war technology. It's glorious name will forever remain in the records of the 2nd World War. Since 1943, during World War II, thee appeared an unusually fast tank on the European Front that silhoueted among its German Mechanized Division. This was the "Panther" medium tank, with its formidable power of attack and fast maneuverability, that soon became an object of terror to men of the Allied Forces. If put to a question, "Which was the best German tank during the war?" The majority of the people, without hesitation will answer the name "Panther". It is known that the PZKW-IV and the Tiger-II tanks were also produced by German technology and were both outstanding tanks. But the PZKW-IV was meant to be replaced by the Panther, and the Panther, showing improved attacking and defensive powers and accurate maneuver ability on the field, soon became the German's main strength tank. The Tiger I with its 88mm gun would seem at first to be superior to the Panther's 75mm gun in attacking power. But when viewed from the point of armour piercing power of the shell, the Panther, with its 70 caliber KWK 42 anti tank gun and sloping side armour provided much stronger in actual fighting than the Tiger I's 56 caliber KWK 36 anti tank gun with vertival side armour. Ger. Panther Med. Tank

More
1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)

1:35 scale

1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)

300035020

€17.99

Article number: 300035020 Product: 1/35 WWII Sdkfz.251/1 Halbk. Hanomag (5) In 1938, the German Army decided to develop an armoured personnel carrier on the basis of the 3-ton half track (HL-KL-9p). Hanomag Hannoversch Machinenbau (AG) in Hannover was ordered to develop the running gear and Bussing-NAG in Berlin was to develop the superstructure to be armoured. Design work was hastened on the model of existing armoured cars and a prototype was completed at the end of 1938. The Germans tested the prototype in the Kumahsdorf Proving Ground and accepted it for mass production. Thus was born the Armoured Personnel Carrier Hanomag Sdkfz 251/1 which, we may safely say, was a synonym for the German mechanized corps that showed activity in all battlefields throughout the war.

More
1:35 Dt. Pz.Kpfw. IV Ausf.G Frühe.Prod.

1:35 scale

1:35 Dt. Pz.Kpfw. IV Ausf.G Frühe.Prod.

300035378

€56.99

More
1:35 Ger. PzKpfw.VI Tiger I E Early (1)

1:35 scale

1:35 Ger. PzKpfw.VI Tiger I E Early (1)

300035216

€46.99

Article number: 300035216 Product: 1:35 Ger. PzKpfw.VI Tiger I E Early (1) The Tiger I needs little introduction, this legendary 88mm gun-toting AFV being the subject of countless war tales. Early production versions of the Tiger I were rushed from the factories by the end of 1942, bound for the harsh realities of the Eastern Front and the conflict with Soviet Russia, as well as the sweltering climes of North Africa. This model recreates such an early production variant, from the weighty overall design down to parts such as the turret with circular cupola, smoke dischargers, and large pistol port. Hull details such as air cleaners are of course not missed out. The kit also includes six marking options and an authentic figure.

More
1:35 WWII PzKpfw. II Ausf.F/G (5) SK.121

1:35 scale

1:35 WWII PzKpfw. II Ausf.F/G (5) SK.121

300035009

€14.49

Article number: 300035009 Product: 1/35 WWII PzKpfw. II Ausf.F/G (5) SK.121 In the morning of September 1, 1939, the German forces consisting of the 3rd, 4th, 8th, 10th and the 14th Armies invaded Poland all heading for Warsaw, its capital. This was the beginning of the 2nd World War that had shaken the whole world for six years and the Germans made a good show of their war efforts at the start with this violent surprise offensive by massed air forces and mechanized ground forces in close co-ordination, the so-called "Blitzkrieg". It was none other than the Pzkpfw 11 that had played the key role in this Blitzkrieg which started with the invasion of Poland to be followed by break-through of the Maginot-line 7 months later and ended with the surrender of France. In anticipation of the delay in production of the two main strength tanks of the Pzkpfw III and the Pzkpfw IV then under development, the Ordnance Department decided in 1934 to develop a new tank instead to fill the gap. It gave specifications of the proposed new tank to the following three companies - the Mann, the Krupp and the Henschel. The specifications envisioned a tank weighing less than 10 tons and armed with 2 cm and 7.92 mm machine guns, one each. Among the designs of the rivaling three companies presented, the one by the Mann was selected and the Mann in cooperation with the Daimler-Benz developed a first tank of the a1 type in 1935. When 25 tanks of the same type were produced, the tank was officially named, "Panzer Kampfwagen II". After the first 25, another 25 tanks of the a2 type and 50 of the a3 type were produced in succession by 1936. Tanks of these 3 types thus produced were equipped each with a 6-cylinder, 130HP, May-Bach HL37 engine and credited with a maximum speed of 40km/h. However, it was decried that the horse-power was not enough and the engine was replaced with a May-Bach HL-62 one of 140 HP. The frontal armour, too, was reinforced and a new tank of the b type was produced. In 1937, the Pzkpfw II was further improved and a series of new ones of the c type were produced. The c-type tanks used 5 large sized road wheels suspended only at one end by leaf spring. This suspension system newly introduced became a common feature to all the pzkpfw II produced ever since. Also, the front portion of hull was reshaped into a more roundish form. From 1937 to the beginning of 1940, Pzkpfw II of mass production types, A, B, and C, were manufactured in great numbers. To increase their productivity's, the frontal armour plate was replaced with an angular single-piece one. Pzkpfw II with specifications described above played the key role in the Blitzkrieg. At the start of this Blitzkrieg, the German tanks numbered 2580 in all, of which nearly half amounting to 955 in number were the Pzkpfw II. In 1940, mass production of the F type was started. The new Pzkpfw II was reinforced in its frontal armour (thickened to 35mm) and side (to 20mm). However, the improvement added its weight and its overall weight reached up to 9.5 tons. The main gun was replaced with a 20mm KwK 30 machine gun. The gun used to be an anti-air MG but remodeled into a main gun for a tank. Frontal armour to cover upper hull, also, was changed into a plain single-piece plate. Further, a false look-out window beside the genuine one for the driver and another for the same were newly added. These were the distinct features of the F-type tanks. After the F-type ones, those of the final mass-production type G were produced. Their main guns were much more powerful KWK 38 MGs, and each tank of this type was fixed a sundries-box at the rear of gun turret. These two were main features that clearly distinguished the G type from the preceding ones. A series of the Pzkpfw II succeeding those of the g type were produced until those of the L type appeared. However, respective numbers of the Pzkpfw II of types produced were all small. It is true that judged by the curre

More
1:35 Diorama-Set Allied Vehicle Access.

1:35 scale

1:35 Diorama-Set Allied Vehicle Access.

300035229

€11.99

Article number: 300035229 Product: 1:35 Diorama-Set Allied Vehicle Access. You will be able to provide your 1/35 scale model with an even greater air of realism once it is fully loaded with accessories from this set. A rich assortment of allied army use equipment such as drum cans, jerry cans, buckets, a variety of canvas goods including bags, and vehicle weight plates are realistically reproduced.

More
1:35 Fig.-Set Ger. MG Troops (7)

1:35 scale

1:35 Fig.-Set Ger. MG Troops (7)

300035038

€7.19

Article number: 300035038 Product: 1:35 Fig.-Set Ger. MG Troops (7) This is a 1/35 scale plastic model assembly kit depicting WWII German soldiers with MG34 and MG42 machine guns. ★Features parts to make three different teams of gunner and loader, plus a commander with binoculars for seven figures in total.

More
1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3)

1:35 scale

1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3)

300035047

€7.59

Article number: 300035047 Product: 1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3) This is a 1/35 scale plastic model assembly kit depicting the L/46 75mm Pak40 anti-tank gun used by German forces in WWII. ★The imposing form of the long-barrelled gun is captured in style, down to details such as sight and handle. ★Barrel offers elevation and traverse, while the breech also slides and the carriage can be moved as well. ★Comes with three figures, plus accessories such as amom cases, shells and more.

More
1:35 Ger. PzKpfw. IV Ausf. D (3)

1:35 scale

1:35 Ger. PzKpfw. IV Ausf. D (3)

300035096

€21.99

Article number: 300035096 Product: 1:35 Ger. PzKpfw. IV Ausf. D (3) This is a 1/35 scale plastic model assembly kit depicting the Ausf.D variant of the German WWII tank Pz.Kpfw.IV. ★From the short-barrelled 75mm gun to the powerful design, the form of the tank is recreated in style. ★Comes with parts to recreate either early or late production Ausf.D variants. ★Includes three figures depicted in uniform seen during the invasions of Poland and France in the opening years of WWII.

More
1:35 Ger. SdKfz.173 Jagdpanther Late.(1)

1:35 scale

1:35 Ger. SdKfz.173 Jagdpanther Late.(1)

300035203

€39.99

Article number: 300035203 Product: 1:35 Ger. SdKfz.173 Jagdpanther Late.(1) The German tank destroyer Jagdpanther used the proven Panther medium tank chassis fitted with a fixed fighting compartment and a powerful 88mm gun. A late production variant of the Jagdpanther now comes as a 1/35 scale plastic assembly kit model. You can choose to assemble a Jagdpanther produced from May to December 1944 or from December 1944 onwards. The fighting compartment interior features superb details including the main gun loading part, bulkhead, and commander's seat. Movable escape hatch as well as open/closed selectable hatches provides the model with a greater presence. Kit includes parts to depict die-cast type exhausts as well as exhausts with flame dampers. A commander figure is also included.

More
1/35 German Tank Crew Set

1:35 scale

1/35 German Tank Crew Set

300035354

€19.99

Article number: 300035354 Product: 1/35 German Tank Crew Set This is a German tank crew figure set. The last German figure set was designed way back in 1996. This comprehensive set features 8 figures in highly realistic pose, that are adaptable to use with a multitude of WWII German armor kits.

More
1:35 Brit. LRDG Command Car w/ 7 Figures

1:35 scale

1:35 Brit. LRDG Command Car w/ 7 Figures

300032407

€42.99

Article number: 300032407 Product: 1/35 Brit. LRDG Command Car w/ 7 Figures The LRDG (Long Range Desert Group) was a British unit which served in North Africa during WWII, performing reconnaissance and raiding duties. Their command cars were trucks which had been modified with weaponry, and proved to be a thorn in the side of German units in the area. Now, this comprehensive set, which s a collaboration between Tamiya and Master Box Ltd., lets you create your own diorama with 7 figures in realistic poses, a vehicle and accessories all thrown in!

More
1:35 Brit. Univers. Carr. Mk.II (3)

1:35 scale

1:35 Brit. Univers. Carr. Mk.II (3)

300035249

€23.99

Article number: 300035249 Product: 1:35 Brit. Univers. Carr. Mk.II (3) During WWII, the British army used various small tracked personnel carriers such as the Universal Carrier Mk.II, which first appeared in 1942. Tamiya's plastic assembly model kit accurately reproduces this vehicle's compact design, suspension, and equipment. Included in the set are three figures to depict a driver, gunner, and radio operator as well as an additional two figures in North African front uniforms. Four kinds of decals are also included to allow you to depict the Universal Carrier Mk.II in a wide variety of battlefield settings including North Africa, Italy, and France.

More
1:35 Diorama-Set Field Kitchen (4)

1:35 scale

1:35 Diorama-Set Field Kitchen (4)

300035247

€19.49

Article number: 300035247 Product: 1:35 Diorama-Set Field Kitchen (4) This is a plastic model assembly kit of a field kitchen widely used by the German army during WWII. The typical German field kitchen consisted of a large-sized cooking pot and a coffee heater and was connected to a limber which carried cooking materials, various kinds of containers, and emergency rations; the whole package has been realistically reproduced. The limber and trailer can be attached after assembly. Two each of soldier and cook figures are included with the set. A rich assortment of accessories such as milk cartons, bread, cheese, apples etc provide the model with a realistic finish. Four figures included.

More
1:35 Diorama-Set Ger. Weapons Inf.(24)

1:35 scale

1:35 Diorama-Set Ger. Weapons Inf.(24)

300035111

€5.29

Article number: 300035111 Product: 1:35 Diorama-Set Ger. Weapons Inf.(24) This is a 1/35 scale plastic model assembly kit depicting a whole host of armament typically carried by WWII German infantry. ★Firearms in the set include Luger P08 and Walther P38 pistols, Kar98K and G41 rifles, MP40 submachine guns, MP44 selective fire rifles, Pz.B.39 anti-tank rifles, MG34 and MG42 machine guns, magnetic mines, and even the Panzerfaust. ★Accessories such as tripods, ammo cases and more are also in the set.

More
1:35 Diorama-Set Tank Barricade

1:35 scale

1:35 Diorama-Set Tank Barricade

300035027

€5.49

Article number: 300035027 Product: 1:35 Diorama-Set Tank Barricade This is a 1/35 scale plastic model asembly kit recreating barricades that will add a whole extra level of detail to your diorama scenes. ★Creates six each of wooden and metal barricade depictions.

More
1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4)

1:35 scale

1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4)

300035195

€33.99

Article number: 300035195 Product: 1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4) During WWII, German armored divisions effectively used Hanomag half-track armored carriers in transport and support roles. Among the many variations was the Sd.Kfz. 251/1 Ausf.D which first appeared in 1943 and is now faithfully depicted as a plastic assembly model kit. The features of the distinctively styled Ausf.D which includes the open top cabin, seats, and wireless radio have been realistically reproduced in great detail. The rear gate can also be depicted in either open or closed position. Included with the Ausf.D are 4 figures in dynamic poses such as the driver looking back from the driver's seat as well as the commander showing the direction of the enemy. In addition, weapons such as a Panzerfaust and MG42 machine gun are included with the kit for added realism.

More
1:35 US Tank M41 Walker Bulldog (3)

1:35 scale

1:35 US Tank M41 Walker Bulldog (3)

300035055

€17.29

Article number: 300035055 Product: 1:35 US Panzer M41 Walker Bulldog (3) This is a 1/35 scale plastic model assembly kit depicting the M41 Walker Bulldog. ★The compact form of the 72mm gun-toting M41 is captured in style. ★From accurate surface textures to depictions of weld lines, there is plenty of detail. ★Comes with decals to depict either a U.S. or a Japan Ground Self Defense Force vehicle. ★Includes a commander figure and two soldiers to add further life to your model.

More
1:35 WWII Ger.Jerry Can Set (12) Early

1:35 scale

1:35 WWII Ger.Jerry Can Set (12) Early

300035315

€6.99

Article number: 300035315 Product: 1:35 WWII Ger.Jerry Can Set (12) Early Originally conceived for use by German forces during WWII, the Jerry Can's design proved to be so good that it was reverse-engineered for use by the Allies. The 20-liter container was tough and compact, allowing them to be easily stowed aboard vehicles. It had a simple but effective lid mechanism with three handles. The early type featured a simple cross-shaped indentation for strength while later types had more complex indentation designs. Set contains 12 early type Jerry Cans, 2 types of storage boxes, a notek light, and a jack with its base.

More
1:35 Brit. Tank Churchill Mk.VII (6)

1:35 scale

1:35 Brit. Tank Churchill Mk.VII (6)

300035210

€39.99

Article number: 300035210 Product: 1:35 Brit. Tank Churchill Mk.VII (6) This is a 1/35 scale plastic assembly kit model of the British Infantry Tank Mk.IV Churchill Mk.VIII. Introduced at the end of 1943, the tank demonstrated its worth during the Normandy invasion while supporting Allied infantry units. The traditional form of the tank, including the unique suspension system with multiple small road wheels, has been faithfully reproduced. In addition, the kit comes with figures which depict a commander, gunner, driver, and a farmer. Abundant accessories such as a cart and milk cans are also included to create a simple diorama.

More
1:35 British Light Utility Car 10HP

1:35 scale

1:35 British Light Utility Car 10HP

300035308

€35.49

Article number: 300035308 Product: 1:35 WWII British Light Utility Car 10HP British forces used passenger car chassis, during WWII, as the basis for pick-up style military vehicles. Officially identified as a "Light Utility Car" soldiers called them affectionately by the nickname "Tilly". The vehicle was equipped with a 30hp engine and rear wheel-drive. However, the car did not have sufficient off-road abilities and was soon replaced by 4WD vehicles. As a result, the "Tilly" was used in airbases for liaisons and in other paved areas. The vehicle served in the Dunkirk evacuation, North African and Italian fronts, and Europe from the Normandy invasion on.

More
1:35 Bundeswehr MBT Leopard 1 (1)

1:35 scale

1:35 Bundeswehr MBT Leopard 1 (1)

300035064

€23.49

More
1:35 Diorama-Set Sand Bags (36+12)

1:35 scale

1:35 Diorama-Set Sand Bags (36+12)

300035025

€5.49

More
1:35 Diorama-Set US/Dt.Jerry Can Set

1:35 scale

1:35 Diorama-Set US/Dt.Jerry Can Set

300035026

€5.49

Article number: 300035026 Product: Gear bag 58618 Mt.Beetle This is a 1/35 scale plastic model assembly kit recreating various jerry cans, barrels and other containers. ★Use them to add extra life to your diorama creations, placing them upon AFVs or in the hands of figures. ★Includes nine each of U.S. and German type jerry cans, plus three each of new and dented barrels.

More
1:35 Fig-Set Ger. Field Commander (5)

1:35 scale

1:35 Fig-Set Ger. Field Commander (5)

300035298

€20.49

Article number: 300035298 Product: 1:35 Fig-Set Ger. Field Commander (5) WWII German Commanders This 1/35 scale plastic assembly kit contains five WWII German field commander figures. ★The set includes an high-rank officer pointing out the target holding a map, a commander with a briefcase and a map case, a commander with a MP40 gun, a low-rank officer checking his Luger P08 gun, and a radio operator. ★The MP40 and Luger P08 guns as well as holsters, briefcase, and the radio have a rich finish. About the Uniforms and Equipment The German commanders wore uniforms which had same design as those of soldiers during WWII. However, commanders were allowed to wear tailor-made uniforms made from nicer materials. Likewise, they also wore better quality coats as well as leggings and boots. They usually carried guns such as the Luger P08 and Walther P38, but often used MP40 machine guns to fight against enemies on the frontlines.

More
1:35 Figure-Set US Army Infant. (4)

1:35 scale

1:35 Figure-Set US Army Infant. (4)

300035013

€5.49

Article number: 300035013 Product: 1:35 Figure-Set US Army Infant. (4) This is a 1/35 scale plastic model assembly kit depicting U.S. infantry in Western Europe after the Normandy Landings in June 1944. ★Their subjects are captured in realistic pose: lobbing a grenade, cocking firearms and holding a flamethrower. ★Three of the figures are depicted in standard cloth legwear, and one in leather.

More
1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4)

1:35 scale

1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4)

300035035

€7.19

Article number: 300035035 Product: 1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4) This is a 1/35 scale plastic model assembly kit depicting the 37mm Pak35/36 anti-tank gun deployed by German WWII forces. ★The gun is comprised of numerous parts for an authentic look. It offers elevation and traverse movement. ★Choose between standard and late-war barrels. ★Comes with various accessories and four figures as a mini-diorama in its own right.   Warning! Not suitable for children under 14 years.

More
1:35 Ger. Krupp Protze w/ 37mm PAK (4)

1:35 scale

1:35 Ger. Krupp Protze w/ 37mm PAK (4)

300035259

€39.99

Article number: 300035259 Product: 1:35 Ger. Krupp Protze w/ 37mm PAK (4) About Krupp Protze 1ton (6X4) Towing Truck w/3.7cm Pak Popularly known as the "Boxer" because of its air-cooled flat-four square 4-cylinder engine, the L2 H43 was developed by the Krupp company and mass produced from 1933. This truck was capable of both personnel and light-artillery transport and featured unique 6x4 independent suspension with 4-wheel drive and was capable of speeds up to 70km/h. In 1936, this truck had its horse-power improved from 55hp to 60hp with the development of the L2H431 version. This latter version underwent various improvements, particularly those allowing it to tow a 3.7mm PAK 35/36 anti-tank gun. After this improvement, the L2H431 came to be known as the Protze, and could hold 1 driver and 5 artillery crew. From the start of WWII the Protze was employed as standard equipment in anti-tank artillery divisions and was actively deployed to battlefronts in France and Poland. About the Model ★1/35 scale ★Overall length: 250mm ★Every characteristic of this truck such as the low-profile bonnet, the chassis, the ammunition boxes and the crew seats on the rear part, as well as the spare wheel for the anti-tank gun has been realistically reproduced. ★A 3.7cm Pak anti-tank gun and various accessories are part of the set. ★4 all-new figures and decals for 4 different markings are included.

More
1:35 Ger. Sturmtiger 38cm RW61 (1)

1:35 scale

1:35 Ger. Sturmtiger 38cm RW61 (1)

300035177

€52.49

Article number: 300035177 Product: 1:35 Ger. Sturmtiger 38cm RW61 (1) In the final stages of WWII, the Sturmtiger made its appearance on the battlefield. Based on the Tiger I hull, it came armed with a giant 38cm rocket launcher. The distinctive form of the Sturmtiger with its thick and short gun is now faithfully reproduced as a plastic assembly model kit. The main hatch on the superstructure can be depicted in either open or closed position, the rocket launcher and escape hatch are moveable even after assembly, the loading crane can also rotate, and the heaviness of the tracks is also realistically depicted. Also included in the set is one figure and four rockets.

More
1:35 Ger.Flak 8,8 w/Motorcycle (9)

1:35 scale

1:35 Ger.Flak 8,8 w/Motorcycle (9)

300035017

€32.99

Article number: 300035017 Product: 1/35 WWII Ger.Flak 8,8 w/Motorcycle (9) This famous weapon is well known for its role in World War II. It did, in fact, have its origins during the first World War, when guns of this calibre were used in an anti aircraft role.

More
1:35 US MBT M1A1 Abrams (2)

1:35 scale

1:35 US MBT M1A1 Abrams (2)

300035156

€42.99

Article number: 300035156 Product: 1:35 US MBT M1A1 Abrams (2) This is a 1/35 scale plastic assembly kit model of the U.S. M1A1 Abrams Main Battle Tank, the world’s most powerful tank which featured 120mm smoothbore gun, superb fire-control system that uses a laser rangefinder, and an impressive gas turbine engine. The massive, dynamic form of the tank has been realistically reproduced. Details such as engine grille and welded sections on armor plates have a rich finish. The model features 12.7mm and 7.62mm guns as well as smoke dischargers. Nylon mesh to depict the rear rack is included to enhance realism. In addition, a commander and a loader figures are also included in kit.

More
1:35 US MBT M1A1 Abrams w/Mine Plow(2)

1:35 scale

1:35 US MBT M1A1 Abrams w/Mine Plow(2)

300035158

€49.99

Article number: 300035158 Product: 1:35 US MBT M1A1 Abrams w/Mine Plow(2) Minefields were a constant hazard for invading U.S. forces during the Persian Gulf War of 1991; chief among their countermeasures was the trusty M1A1 tank fitted with a mine plow. This plastic model assembly kit expertly recreates such an M1A1 Abrams with mine guard and plow blade equipment depicted using separate parts. Metal chains and enamel wire are included, to be employed in the recreation of the roller at the front of the vehicle. Modelers can choose to assemble the model with hatches open or closed, and will be delighted by the range of accessories, including spare wheels, ammo cases and more! The kit comes with a full body commander figure and loader torso figure to further enhance its realism.

More
1:35 Zimmerit Dekor-Satz Tiger I

1:35 scale

1:35 Zimmerit Dekor-Satz Tiger I

300012647

€11.29

Article number: 300012647 Product: 1/35 WWII Zimmerit Dekor-Satz Tiger I Simulating Zimmerit on military models using putty enhances the model's presence but at the same time it requires advanced skills and is time consuming. This sticker sheet enables easy reproduction of Zimmerit on Item 35194 1/35 scale German Tiger I Mid Production and Item 35146 German Tiger I Late Production. By simply applying the stickers on the model and painting, a realistic Zimmerit effect can be achieved.

More
1/35 US M10 Mid Production

1:35 scale

1/35 US M10 Mid Production

300035350

€52.99

Article number: 300035350 Product: 1/35 US M10 Mid Production This is a model of the famed M10 Tank Destroyer, a subject also covered in the 1/48 scale Military Miniature series. This largely newly-tooled model (only machine gun and clear parts are taken over from existing models) gives it the glorious detail of the larger 1/35 scale. The astonishing success of German armor tactics in 1940 prompted U.S. forces to adopt a doctrine requiring dedicated new tank destroyers to counter them. After going down a few different design routes at the start of the process, they eventually hit upon the highly successful M10 design with well-sloped (if rather thin, to keep the vehicle light and maneuverable) armor plate, and the highly capable 3-inch (76.2mm) gun. Over 4,900 were produced, and took part in Operation Torch (the invasion of N. Africa), as well as fighting in Italy and the advance upon Germany that would bring the exhausting conflict to a close. About the model 1/35 scale plastic model assembly kit. Length: 196mm, width: 88mm. Intensive study and measurement of the M10 in the tank museum at Saumur led to this highly detailed depiction of its form complete with sloped armor, right down to auxiliary armor bosses. The open top on the distinctive turret allows viewing of the 3-inch gun breech and realistic interior. Compare and contrast depictions of surface textures such as the cast mantlet and differential cover versus the welded armor plate of the turret sides and upper hull. Belt-type parts recreate T51 tracks. Driver's hatch can be attached in open or closed position, and features periscope depiction. Comes with 3 figures (commander, loader, gunner) in realistic pose, plus 2 marking options for recreating M10s belonging to the 601st and 634th U.S. Tank Destroyer Battalions

More
1:35 Archer tank destroyer

1:35 scale

1:35 Archer tank destroyer

300035356

€64.99

Article number: 300035356 Product: 1:35 Archer tank destroyer This model assembly kit recreates the British Army’s Archer. As WWII progressed, British troops found that their 2-pounder and 6-pounder guns were being rendered obsolete by German armor, and planners decided to develop a vehicle using the powerful 17-pounder (76.2mm) gun. The vehicle chosen to mount the gun on was the Valentine; the turret was removed and replaced with a fighting compartment – this would be known as the Archer. Interestingly, as there was little time to re-organize the cramped layout, the 17-pounder had to be mounted pointing rearwards to fit it in. As a result, the Archer moved and fired in opposite directions. However, it offered strong performance and served with British and Commonwealth units from October 1944 till the end of WWII. The British continued using it until the early 1950s.

More
1:35 Brit. 25pdr Field gun w/Veh.(1)

1:35 scale

1:35 Brit. 25pdr Field gun w/Veh.(1)

300035044

€27.49

More
1:35 Brit. Crusader Mk.III Med. Tank

1:35 scale

1:35 Brit. Crusader Mk.III Med. Tank

300037025

€50.99

Article number: 300037025 Product: 1:35 Brit. Crusader Mk.III Med. Tank This is a Tamiya-Italeri Series model kit based upon the Italeri British Cruiser Tank Mk.VI Cusader Mk.III. Like other products in the series, it updates the original Italeri kit it has new and updated parts from the Italian maker, plus Tamiya figures, decals and instruction manual, all packaged in a new Tamiya box! The Crusader was an important tank for British forces in North Africa, and the Mk.III variant was up gunned with a 6-pounder gun and more reliable engine that made it a force to be reckoned with. This effectiveness made it the most produced tank in the Crusader family.

More
1:35 Brit. Univer. Carrier Mk.II (5)

1:35 scale

1:35 Brit. Univer. Carrier Mk.II (5)

300035175

€21.49

Article number: 300035175 Product: 1:35 Brit. Univer. Carrier Mk.II (5) During WWII, the British army used small sized fully tracked weapon carriers famously known as "Bren Gun Carriers." This 1/35 scale plastic assembly kit model reproduces one of those carriers, the Universal Carrier Mk.II which was the largest produced in the carrier series. The open-top compartment has been realistically reproduced with realistic seats and radio equipment. Kit comes with firearms such as a Bren machine gun, two Enfield rifles, and PIAT anti-tank weapon, as well as a variety of accessories including ammunition cases. Furthermore, 3 figures from European front and 2 figures from North African front are also included in kit.

More
1:35 BW Flak-Panzer Gepard (1)

1:35 scale

1:35 BW Flak-Panzer Gepard (1)

300035099

€26.49

Article number: 300035099 Product: 1:35 BW Flak-Panzer Gepard (1) This is a 1/35 scale plastic model assembly kit depicting the Gepard, a post-WWII anti-aircraft tank operated by West Germany. ★From the 4km-range 35mm cannons to the radar equipment front and rear, the form of the tank is captured in style. ★Features moving barrel and radar depictions, plus opening turret rear hatches. ★Metal net is included in the kit to recreate engine deck grille details. ★Comes with a commander figure in beret.

More
1:35 Fig.-Set Floating Car (4)

1:35 scale

1:35 Fig.-Set Floating Car (4)

300035253

€11.29

Article number: 300035253 Product: 1:35 Fig.-Set Floating Car (4) This is a 1/35 scale plastic assembly kit of WWII German tank crew figures which is perfect for displaying with German vehicles such as the Kübelwagen and Schwimmwagen. The set contains 4 figures in realistic pose, including a field commander sitting on the door, a seated driver, a grenadier leader pointing forward, and a tank commander wearing a leather jacket. In addition, the package side features a road sign illustration from the Ardennes front which can be used in the creation of dioramas. Set includes four figures.

More
1:35 Fig.-Set US Infant. W-Europe (8)

1:35 scale

1:35 Fig.-Set US Infant. W-Europe (8)

300035048

€7.19

Article number: 300035048 Product: 1:35 Fig.-Set US Infant. W-Europe (8) This is a 1/35 scale plastic model assembly kit depicting U.S. infantry in action in Western Europe during WWII. ★Contains parts for eight figures in total. ★Figures are depicted in 1941 and 1943 issue uniform. ★Comes with a plethora of parts for firearms such as M1 rifle and M1 carbine, as well as plenty of accessories like holsters and packs.

More
1:35 Ger. 20mm Flakvierling 38

1:35 scale

1:35 Ger. 20mm Flakvierling 38

300035091

€7.79

Article number: 300035091 Product: 1:35 Ger. 20mm Flakvierling 38 Shooting an impressive 600 rounds per minute and greatly feared by Allied pilots was the German 20mm Flakvierling 38 MITSd.Ah.52 which is now recreated as a plastic assembly model kit. Although its purpose was to provide aerial defense against Allied aircraft attack from a grounded position, it was also seen used with trucks and other land vehicles as well on warships. Features of the model including the skyward aimed gun barrels, ammunition cartridges, operating handles, pedals etc. have all been realistically reproduced. The gun barrels along with its gun sight offer elevation and traverse. Also included with the set is a trailer to allow you the choice of assembling the Flakvierling 38 in transport or being fired. Ger. 2cm Flakvierling 38

More
1:35 Ger. Cargo Truck Krupp Protze (3)

1:35 scale

1:35 Ger. Cargo Truck Krupp Protze (3)

300035317

€34.99

Article number: 300035317 Product: 1:35 Ger. Cargo Truck Krupp Protze (3) Supporting the German army's mechanized Blitzkrieg during the early stages of WWII was the 6X4 Krupp Protze light truck. Popularly known as the "boxer" due to its air-cooled flat-4 engine, this vehicle provided valuable support for the rapidly moving army by towing artillery pieces and carrying troops and supplies. It's unique sloped engine cover offered excellent forward visibility and the truck was well-liked for its reliability and ease of maintenance

More
1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1)

1:35 scale

1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1)

300035213

€17.99

Article number: 300035213 Product: 1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1) The highly reliable, compact Kübelwagen Type 82, which served as transportation for high ranking German officers throughout WWII, now comes realized as a plastic assembly model kit. ★The model realistically captures the functional form of this mass produced car. ★The plain constitution of the press-lined body as well as the suspension arms, under guards, suspension area, and interior details such as the instrument panel and pedals all feature a realistic finish. ★You may choose to assemble all four doors in either open or closed positions. ★A figure depicting a driver in a relaxed pose is included.

More
1:35 Ger. PzKpfw. III Ausf. L (1)

1:35 scale

1:35 Ger. PzKpfw. III Ausf. L (1)

300035215

€43.99

Article number: 300035215 Product: 1:35 Ger. PzKpfw. III Ausf. L (1) From the beginning and through to the middle stages of WWII, the Pz.Kpfw.IIIs along with the Pz.Kpfw.IVs were the core tanks used by German tank divisions. Each variant of the Pz.Kpfw.III including the Ausf.L was highly reliable, came armed with a long barreled 60 caliber 50mm gun and had reinforced armor. This is a 1/35 scale plastic assembly model kit of one such Ausf.L tank. Famous characteristics of the Ausf.L which include the driver's front panel and main gun mantlet have been realistically reproduced. The fighting compartment loading area, turret interior, and commander’s seat have been reproduced. You can also choose to assemble each hatch in either open or closed positions. Accessory parts seen on the hull such as spare tracks and tools feature a precise finish. A tank commander figure is included.

More
1:35 Ger. SdKfz.161/1 Panzer IV H Ea.(1)

1:35 scale

1:35 Ger. SdKfz.161/1 Panzer IV H Ea.(1)

300035209

€43.99

Article number: 300035209 Product: 1:35 Ger. SdKfz.161/1 Panzer IV H Ea.(1) During WWII, the most important tank used by German forces throughout the entire conflict, and also the most produced was the Pz.Kpfw.IV. This is a 1/35 scale plastic assembly model kit of the German Pz. Jpfw. IV Ausf.H Early Version which is generally regarded as the definitive model of the Pz.Kpfw.IV tanks. The model accurately depicts the tank with its powerful 48 caliber 75mm gun and Schürzen that surrounded the tank sides and turret. The kit includes two kinds of hull front plates and sprocket wheels to allow you to create a model from different dates of production. Also included is a tank commander figure wearing a winter issue jacket.

More
1:35 Ger. SdKfz.181 PzKpfw.VI Tiger I E

1:35 scale

1:35 Ger. SdKfz.181 PzKpfw.VI Tiger I E

300035146

€52.99

Article number: 300035146 Product: 1:35 Ger. SdKfz.181 PzKpfw.VI Tiger I E During WWII, the German Tiger I was greatly feared by Allied forces for its thick armor and powerful 88mm gun. This is a 1/35 scale plastic assembly kit model of the German Tiger I late production variant which was put in production from January 1944 and appeared on the Normandy front. Features of the late production variant of the Tiger I, including the distinctive silhouette, the powerful 88mm gun, periscope on commander's cupola, and pressed steel wheels, have all been realistically reproduced. In addition, shell loading area in the turret as well as hatch undersides have detailed finish. Kit includes two types of gun barrels and gun mantlets to enable to build the last production variant model. Furthermore, one commander figure also included.

More
1:35 Ger. SdKfz.182 Königstiger Por-T(1)

1:35 scale

1:35 Ger. SdKfz.182 Königstiger Por-T(1)

300035169

€47.99

Article number: 300035169 Product: 1:35 Ger. SdKfz.182 Königstiger Por-T(1) During design of the King Tiger, two 88mm gun-toting turret types were developed: the Porsche-produced variant was recognizable by its curved lines; this model accurately captures the form of a Porsche turreted King Tiger, hitting the nail on the head with differences from the competing Henschel ("Production") turret King Tigers, such as the tapered gun barrel and large grille covers. The model offers a choice of open or closed turret and hull hatches, and succinctly recreates the complex interweaved wheel setup. Belt-type tracks and a commander figure are packaged in the model.

More
1:35 Ger.Tank Destroyer Jagdtiger Ea(2)

1:35 scale

1:35 Ger.Tank Destroyer Jagdtiger Ea(2)

300035295

€82.99

Article number: 300035295 Product: 1:35 Ger.Tank Destroyer Jagdtiger Ea(2) During the later stages of WWII, the heavy tank destroyer Jadgtiger (which weighed in excess of 70 tons and had an impressive 12.8cm gun and thick armor) was the heaviest tank seen on both the eastern and western fronts. Tamiya is releasing this 1/35 scale Jagdtiger after its first release 33 years ago in commemoration of the 40th year anniversary of the 1/35 Military Miniature series. Lining this Jagdtiger up with other 1/35 scale tanks like the German King Tiger Production Turret (35164), German King Tiger Porsche Turret (35169), German Tank Destroyer Jagdpanther Late Version (35203), German King Tiger (Ardennes Front) (35252), and German Tank Destroyer Hetzer Mid Production (35285) would make for an imposing display. •Completely new design. •Interior details such as the gun breach area and the floor boards are reproduced. •Commander and driver torso figures included. •5 kinds of markings for the 653rd Heavy Tank Battalion included. •Along with its extended hull, the spare track link racks and jack are also realistically reproduced. •The separately molded disc parts of the road wheels add extra depth to the model. •Two kinds of tracks are included; easy to assemble belt type and connectible assembly type. •A choice of stowed or extended traveling clamps. •Photo-etched parts for the engine intake protective net included.

More
1:35 JGSDF Type 16 MCV (2)

1:35 scale

1:35 JGSDF Type 16 MCV (2)

300035361

€64.99

Article number: 300035361 Product: 1:35 JGSDF Type 16 MCV (2) • This is a 1/35 scale plastic model assembly kit. Length: 241mm. • The cutting edge form of the Type 16 is breathtakingly captured, courtesy of in-depth research of actual vehicles. • Refined, angular surfaces have an uncomplicated parts breakdown without sacrificing detail. • Realistically rendered underside features steerable front wheel pairs. • Clear parts are used to recreate light lenses and periscope components, plus goggles. • Rubber tires feature authentic sidewall shapes and tread patterns. • Comes with 2 figures (one commander and one gunner) for installation in the model. • 3 marking options are planned for inclusion in the kit.

More
1:35 M561 6x6 Cargo Truck Gama Goat

1:35 scale

1:35 M561 6x6 Cargo Truck Gama Goat

300035330

€36.99

Article number: 300035330 Product: 1:35 M561 Transport-Fahrzeug Gama Goat The M561 Gama Goat was seven years in development until production of the vehicle began in 1968. Its unique name was derived from the creator of its articulated joint, Roger Gamaunt, and its mountain goat-like climbing ability. It was unlike most other military off-road vehicles in that power could go to all 6 wheels of the vehicle, and its aforementioned articulated joint allowed 80° pitch and 60° roll ranges of the carrier module at the rear. Its excellent rough-terrain mobility was tempered somewhat by problems with tricky handling and maintenance, as well as its being rather noisy, but the Gama Goat continued in service until it was effectively replaced by the HMMWV in the late 1980s. About the Model • This is a 1/35 scale plastic model assembly kit. • Length: 170mm, Width: 62mm. • The articulation joint of the M561 is recreated faithfully, and the joint on the model uses a poly-cap to accurately mimic the movement range of the real vehicle. • The model features optional front windshield and front-mounted winch parts. • The complex 6-wheel drive suspension is recreated in a single molded part without sacrificing accuracy. • 1 driver figure is included. • Comes with 3 marking options.

More
1:35 Modern JGSDF Type 10 Tank

1:35 scale

1:35 Modern JGSDF Type 10 Tank

300035329

€63.99

Article number: 300035329 Product: 1:35 Modern JGSDF Type 10 Tank The Type 10 is the Japan Ground Self Defense Force’s next generation main battle tank. Now, it joins its predecessors the Type 61, Type 74 and Type 90 in the Tamiya 1/35 Military Miniatures series. The Type 10 was first shown to the world in 2010 (that’s where the 10 in its name comes from), and was assigned to units starting in 2012. Among the many advances from the previous Type 90 model are a Japanese-made 120mm smoothbore main gun, and the so-called C4I system. This state-of-the-art computerized system allows the Type 10 to be connected to a computer network and share information with other tanks, enabling co-ordinated actions. About the Model • 1/35 scale plastic assembly kit • Features detailed and faithful replication of modular armor, as well as the 120 mm main gun. • Lower hull rubber skirts and belt-style tracks ensure the base of the model is also highly realistic. • Includes 2 figures to add to the realism of modelers’ dioramas. • Comes with 3 sets of markings.

More
1:35 US 10-in-1 Cartons WWII

1:35 scale

1:35 US 10-in-1 Cartons WWII

300012689

€4.29

Article number: 300012689 Product: 1:35 US 10-in-1 Cartons WWII These detailed depictions of WWII 10-in1 ration cartons were initially a part of Item 25196, but are now to get their own release in the Detail-Up Parts Series. The 10-in1 Ration was supplied to U.S. troops from 1943 to 1945. One sleeved carton contained four individual boxes, each a day’s rations for ten soldiers and including canned food, biscuits, cereal and more. Item Contents/Information • Sheet dimensions: 200mm x 195mm. • Contains cut-out illustrations for sleeve, carton and inner box components. • One sheet can be used to make eight sets, and you can choose to depict the carton sealed up or even removed from the sleeve and open to reveal the inner boxes. • The sheet also features a basic explanation of the 10-in-1 ration in English and Japanese. • An excellent choice to add further detail to WWII-era U.S. subjects such as those below.

More
1:35 US M40 155mm Howitzer SPG (8)

1:35 scale

1:35 US M40 155mm Howitzer SPG (8)

300035351

€92.99

Article number: 300035351 Product: 1:35 US M40 155mm Howitzer SPG (8) This is an assembly model of the U.S. Self-Propelled 155mm M40. It is a never before seen subject in the Tamiya line-up of 1/35 scale models. The kit uses all new tooling with the exception of the suspension parts as they are from the M4A3E8 Sherman "Easy Eight" model kit. The M40 was a significant step in U.S. Army artillery mechanization, pairing the M1 155mm gun with the proven M4 Sherman chassis. Armor was light given its intended use as a long range weapon (they were effective up to 23.5km) away from the front line, while the layout was changed from the M4 to allow a big fighting compartment at the rear to accommodate the big gun. It was fitted with smooth horizontal volute spring suspension (HVSS). Over 400 were produced before the end of WWII; although they never fought in the conflict, one example of their T83 prototype did. The M40 served in the Korean War, and was eventually replaced by the M53.

More
1:35 US M42 Duster w:3 Figures

1:35 scale

1:35 US M42 Duster w:3 Figures

300035161

€33.99

Article number: 300035161 Product: 1:35 US M42 Duster w:3 Figures The M42 Duster was an anti-aircraft vehicle used in conjunction with tank units, equipped with a pair of 40mm cannons on an open-top turret, and powered by a 500hp engine that let it achieve speeds of up to 70km/h. It was accepted into service with the U.S. Army in 1953 and proved an effective anti- aircraft weapons system. • 1/35 scale plastic model assembly kit. Length: 180mm, width: 93mm. • Gun detail, loader’s seat, rifles and more in the interior. • Three marking options included, offering a choice of U.S., Japan Ground Self Defense Force and former West German Army M42s. • Belt type tracks that can be painted and attached using Tamiya cement. • NEW for this RE-ISSUE: Three figures were originally included in the motorized version of this kit (Item 30027, from 1970). They depict crew in the turret, in the act of locating a target. Updated package and 4-language instruction manual.

More
1:35 US MBT M1A2 Abrams Iraqi Freedom(2)

1:35 scale

1:35 US MBT M1A2 Abrams Iraqi Freedom(2)

300035269

€56.99

Article number: 300035269 Product: 1/35 US MBT M1A2 Abrams Iraqi Freedom(2) U.S. M1A2 Abrams 120mm Gun Main Battle Tank The M1 Abrams, the worlds' strongest tank, has undergone step-by-step modification since its commission by the US military in 1980. The M1A2 evolved from the M1A1HA, and features Intervehicular Information System (IVIS) and Commander's Independent Thermal Viewer (CITV). Kit features A2 turret comes with CITV and new style vision block. About the M1A2 Abrams The M1 Abrams, officially commissioned by the US military in 1980, was designed totally different from previous post-WWII US military tanks. Although fitted with the same 105mm cannon as the M60, the M1 was powered by a gas turbine engine and was fitted with spaced armor. Planned to be commissioned by the US military over a long period, the M1 was designed with future reforms in mind. In 1984, the M1A1 was developed with a 120mm smooth bore cannon, and a further variant the M1A1HA was later developed featuring depleted uranium armor. This then led to the M1A2, which was fitted with Intervehicular Information System (IVIS), Commander's Independent Thermal Viewer (CITV) turret and new style vision block. The M1A1HA and the M1A2 both played significant roles in Operation Iraqi Freedom, being deployed by land forces as well as the Marine Corps as they moved toward Baghdad. M1A2 Abrams OIF

More
1:35 WWII Fig.-Set Ger. Assault Tro. (8)

1:35 scale

1:35 WWII Fig.-Set Ger. Assault Tro. (8)

300035030

€7.19

More
1:35 WWII Fig.-Set Ger.Tank Grenadie.(8)

1:35 scale

1:35 WWII Fig.-Set Ger.Tank Grenadie.(8)

300035061

€7.19

More
1:35 WWII Fig.-Set MG-Crew Maneuver (5)

1:35 scale

1:35 WWII Fig.-Set MG-Crew Maneuver (5)

300035184

€12.29

Article number: 300035184 Product: 1:35 WWII Fig.-Set MG-Crew Maneuver (5) This is a plastic assembly model kit of a WWII German machine gun crew in M43 field uniforms and boots with leggings as seen on German soldiers from 1943. This five figure set features a noncommissioned officer carrying an MP40 submachine gun in his hand, three soldiers carrying ammunition cases and a tri-pod gun mount respectively, and the machine gunner with a MG42 machine gun on his shoulder. The set includes sharply detailed parts to depict equipment such as MG42 and MG34 machine guns, tripod, and ponchos. Combine it with models of tanks and other vehicles belonging to the German army for a wider scale diorama.

More
1:35 WWII Ger.Milit.Insignia Decal Vol.2

1:35 scale

1:35 WWII Ger.Milit.Insignia Decal Vol.2

300012641

€11.79

Article number: 300012641 Product: 1/35 WWII Ger.Milit.Insignia Decal Vol.2 Add further fine details to your 1/35 scale German WWII Infantry figures with this easy-to-use decal set. These are designed with the modeler in mind to save time and stress allowing for a more realistic finish. 1:35

More
60 of 275 Items