RC spare parts & RC tuning
RC spare parts & RC tuning
RC spare parts & tuning parts
04 Spur Gear 93T/104T (F103GT)
300053900€9.79
Article number: 300053900 Product: 04 Spur Gear 93T/104T (F103GT) 0.4 Module spur gear features finer teeth than standard kit-included 0.6 module gear, allowing minute ratio adjustment to improve acceleration and efficiency. Gear contains molybdenum for reduced friction resistance. *Compatible chassis: Mesh with #53101 to #53101 (0.4 pinion gear) to use with F103 and C Car chassis 04 Spur Gear 93T/104T (F103GT)
RC spare parts & tuning parts
1150 Ball Bearing (4) sealed
300053008€36.29
Article number: 300053008 Product: Kugellager 1150 (4) geschlossen Installing ball bearings is the first step to increasing performance. It reduces drive loss, provides smooth movement, extends running time and improves bearing durability. In addition, the rubber seal is also attractive as it has high dust resistance as the sides are covered with rubber material. Scope of delivery: 4x Ball Bearings Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
1:10 Radial Tires M2 (2) 26mm Medium
300053227€16.29
Article number: 300053227 Product: REIFEN (2) RADIAL A radial pattern is added with the same compound as the OP224M2 slick tire. It is mainly useful for quicksand roads or rough roads such as parking lots. Scope of delivery: 2x Tires radial Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
2-Piece Mesh Wheels (2) Black
300054794€10.99
Article number: 300054794 Product: 2-Piece Mesh Wheels (2) Black This is a two-piece mesh wheel set. The wheel rim itself is chrome plated while the mesh centerpiece is molded in black. The set is a color variation of the classic wheels from Item 50548, which include a gold color center piece. Item Contents •Hubcap Sections (Black) x2 •Rim Sections (Plated) x2 •Assembly required. 2 types of offset can be achieved, depending upon the assembly method used. •Compatible with 1/10 scale R/C touring car models using narrow 26mm tires.
RC spare parts & tuning parts
39/40T RingGear XV-02/TT-02 DC
300051704€9.99
Article number: 300051704 Product: 39/40T RingGear XV-02/TT-02 DC Use this Ring Gear Set (39T, 40T) as spare parts for Item 22047 (XV-02/TT-02 Front Direct Coupling Set (39T)). Item Contents/Information - Direct Coupling Ring Gear (39T) x1 - Direct Coupling Ring Gear (40T) x1 - Bevel Pinion Gear (for 39T gear) x1 - Bevel Pinion Gear (for 40T gear) x1 - Compatible with XV-02 and TT-02 chassis cars.
RC spare parts & tuning parts
39T Ring Gear XV-02/TT-02 BD
300051702€5.79
Article number: 300051702 Product: 39T Ring Gear XV-02/TT-02 BD Use this Ring Gear Set (39T) as spare parts for Item 22046 (XV-02/TT-02 Ball Differential Set (39T)) . Item Contents/Information - Ball Differential Ring Gear (39T) x1 - Bevel Pinion Gear (for 39T gear) x1 - Compatible with XV-02 and TT-02 chassis cars.
RC spare parts & tuning parts
3mm Shim-Set (3x10) 0.1/0.2/0.3mm
300053585€11.29
Article number: 300053585 Product: 3mm Shim-Set (3x10) 0.1/0.2/0.3mm These are 3mm shims that can be used in many Tamiya RC cars. They are particularly useful for removing unwanted suspension slack when used on 3mm suspension shafts. The set contains 0.1, 0.2 and 0.3 mm thick washers. Adjust the play of the part attachment part with a 3mm shaft such as B. Suspension shaft. Scope of delivery: 1x Spacer Set (30 pieces) Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
3x10mm Steel CS HexHead Screws (10)
300051629€2.79
Article number: 300051629 Product: 3x10mm Steel CS HexHead Screws (10) ★These are durable steel countersunk screws with hex heads for secure tightening. ★Replace parts in a timely fashion to ensure that your car runs at peak performance.
RC spare parts & tuning parts
3x6mm Steel Hex Head Screws
300051624€2.79
Article number: 300051624 Product: 3x6mm Steel Hex Head Screws ★These are durable steel screws with hex heads for secure tightening. ★Replace parts in a timely fashion to ensure that your car runs at peak performance. Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
3x8mm Steel CS HexHead Screws (10)
300051627€2.79
Article number: 300051627 Product: 3x8mm Steel CS HexHead Screws (10) ★These are durable steel countersunk screws with hex heads for secure tightening. ★Replace parts in a timely fashion to ensure that your car runs at peak performance.
RC spare parts & tuning parts
3x8mm Steel Hex Head Screws (10)
300051626€2.79
Article number: 300051626 Product: 3x8mm Steel Hex Head Screws (10) ★These are durable steel screws with hex heads for secure tightening. ★Replace parts in a timely fashion to ensure that your car runs at peak performance.
RC spare parts & tuning parts
4mm Alum. Flanged Lock Nut Blue Anod.(5)
300053159€13.79
Article number: 300053159 Product: 4mm Alum. Flanged Lock Nut Blue Anod.(5) These aluminum wheel nuts not only reduce weight but also enhance overall appearance. Set includes 5 blue wheel nuts. 4mm Flange Lock Nut Blue
RC spare parts & tuning parts
4mm Flange Lock Nut Bla (8)
300054642€3.69
Article number: 300054642 Product: 4mm Flange Lock Nut Bla (8) This set is a color variation of the flange lock nuts found in Tamiya RC kits. They provide a durable and stylish wheel attachment option. Nylon 4mm Flange Lock Nut x8 Compatible with a range of touring car and off-road cars.
RC spare parts & tuning parts
5mm Body O-Rings (10)
300054384€3.09
Article number: 300054384 Product: 5mm Body O-Rings (10) These 5mm O-Rings are attached to various body mount rods to enable fine height adjustment of the body shell position. They also offer a cushion so the body does not chatter under bumpy driving conditions. Scope of delivery: Body O-Ring (10 pcs.) Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
630 Ball Bearings (8)
300054925€14.99
Article number: 300054925 Product: 630 Ball Bearings (8) Ball bearings are an excellent first step when tuning up your chassis from box stock, providing more efficient drive and longer lasting fun thanks to less wear and tear on moving parts. The 630 ball bearings in this set are for use in the reduction gears on the G6-01TR and GF-01TR chassis. Item Contents/Information • 630 Ball Bearings x8 • For use in the reduction gears on G6-01TR and GF-01TR chassis models. Each reduction gear requires two 630 ball bearings – sixteen total (two of this set) to kit out the GF-01, or twenty-four (three of this set) to kit out the G6-01. • Compatible with GF-01TR and G6-01TR chassis cars.
RC spare parts & tuning parts
Alu. Motor Guard GF-01/WR-02
300054817€37.99
Article number: 300054817 Product: Alu. Motor Guard GF-01/WR-02 This handy motor guard is compatible with Tamiya’s GF-01. G6-01 and WR-02 chassis. Employ it to protect your model’s motor from dust and debris and help it dissipate heat too. • Aluminum Motor Guard x1 • Two included 3x28mm cap screws make for extremely secure attachment to the motor. • A hex wrench is included to aid in attachment. • Compatible with GF-01, G6-01 and WR-02 chassis cars.
RC spare parts & tuning parts
Alu.Servo Stay (R) TB-03
300054090€21.29
Article number: 300054090 Product: Alu.Servo Stay (R) TB-03 Aluminum construction provides stronger servo support. Reduced contact area with chassis also means better roll characteristics. Scope of delivery: 1x Alu Servo Stay (R) (7 parts) Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
Alum. Adjustable SepSusMt (A) (1/1)
300054884€24.99
Article number: 300054884 Product: Alum. Adjustable SepSusMt (A) (1/1) These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (A-a), (A-b) x1 each • Bushings Sprue x1 • This mount allows settings between XA and C (toe angles depend upon separate suspension mounts and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.
RC spare parts & tuning parts
Alum. Adjustable SepSusMt E (1/1)
300054885€24.99
Article number: 300054885 Product: Alum. Adjustable SepSusMt E (1/1) These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (E-a), (E-b) x1 each • Bushings Sprue x1 • This mount allows settings between C and G (toe angles depend upon separate suspension mounts and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.
RC spare parts & tuning parts
Alum. Adjustable Servo Horn
300054893€42.99
Article number: 300054893 Product: Alum. Adjustable Servo Horn ★Set distance between servo horn center and ball connector at 1m increments between 15 and 22mm. ★Steering range is also adjustable. ★Incorporates servo saver function, providing protection in case of crashes and other shocks. Compatible Chassis CC-01, GF-01, G6-01, M-05, M-05 PRO, M-05Ra, M-05 Ver.II PRO, M-06, M-06 PRO, M-07 Concept, M-08 Concept, TA07 PRO, TA07 MS, TB-05 PRO, TT-02 & TT-02B Chassis
RC spare parts & tuning parts
Alum. Adjustable SusMt (1) E
300054882€17.79
Article number: 300054882 Product: Alum. Adjustable SusMt (1) E These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (E) x1 • Bushings Sprue x1 • This mount allows settings between C and G (toe angles depend upon separate suspension mounts and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.
RC spare parts & tuning parts
Alum. Adjustable SusMt (XB) (1)
300054880€17.79
Article number: 300054880 Product: Alum. Adjustable SusMt (XB) (1) These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension shafts, giving a total of 25 potential shaft offset positions. Contents/Information • Aluminum Adjustable Suspension Mount (XB) x1 • Bushings Sprue x1 • This mount allows settings between XD and X (toe angles depend upon separate suspension mounts and bushings used). • Mount has the iconic Tamiya blue anodized finish. • Compatible with TRF419, TA07 and TB-05 chassis cars.
RC spare parts & tuning parts
Alum. Ball Connector blue 5mm
300053642€13.49
Article number: 300053642 Product: Alum. Ball Connector blue 5mm Lightweight and durable aluminum ball connectors provide smooth motion and a cool look with their blue anodized finish. Replace worn parts in a timely manner for optimum performance! Scope of delivery: 10x Ball Head Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
Alum. Ball Nut (10) blue 5mm
300053640€14.29
Article number: 300053640 Product: Alum. Ball Nut (10) blue 5mm Replace ball connector nuts before as they become worn, to ensure your model is running at peak performance. Parts are given a stylish red anodized finish. Cannot be used on DT-02 chassis XB models.
RC spare parts & tuning parts
Alum. Damper Retainer -1mm (4) Blue anod
300053876€27.99
Article number: 300053876 Product: Alum. Damper Retainer -1mm (4) Blue anod Machined aluminum holder with high rigidity and excellent precision. It is possible to lower the vehicle height by lowering the position of the spring set by 1mm compared to the aluminum mount of the OP595TRF shock. It also makes the initial adjustment of the damper spring more reliable. Scope of delivery: 4x Spring Plates Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
Alum. Direct Servo Horn (TAMIYA/FUTABA)
300042248€15.99
Article number: 300042248 Product: Alu Servohebel (TAMIYA/FUTABA) The direct servo horn without the servo saver function produces a sharper steering response. In addition, the mounting point of the pillow ball has been raised by 1.5 mm to eliminate linkage interference and secure the steering angle. Furthermore, in addition to screwing, a clamp type is adopted for the serration part, and it can be fixed more securely by tightening with a 2 x 5 mm cap screw. Scope of delivery: 1x servo arm Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
Alum. HT Servo Saver Cap
300054863€5.49
Article number: 300054863 Product: Alum. HT Servo Saver Cap Ensure that your servo is well protected with this durable and lightweight aluminum cap for use with hi-torque servo savers. Item Contents/Information • Aluminum Hi-Torque Servo Saver Cap x1 • This cap is for use in place of Q4 parts in hi-torque servo savers, providing good durability. • The part has the iconic Tamiya blue anodized finish, with the TAMIYA name laser-engraved.
RC spare parts & tuning parts
Alum. Servo Stays (Short)
300053596€15.49
Article number: 300053596 Product: Alum. Servo Stays (Short) It is a servo brace that can mount a small servo at a lower position. Manufactured from machined aluminum with high rigidity and excellent accuracy. A spacer is also set and a large servo can be attached. These struts allow smaller servos to be mounted in a lower position. They are made of light and rigid aluminium. Spacers for fine adjustment are included. Scope of delivery: 1x Servo Mount Short (14 pcs.) Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
Alum. Turnbuckle Shaft 3x23mm (2) blue
300054248€8.79
Article number: 300054248 Product: Alum. Turnbuckle Shaft 3x23mm (2) blue Turnbuckle shafts allow adjustment of length without removing adjusters. These components are crafted in lightweight and durable aluminum. Parts feature a stylish blue anodized finish. Scope of delivery: 2x Threaded Rods
RC spare parts & tuning parts
Alum. Turnbuckle Shaft 3x32mm (2) blue
300054249€8.79
Article number: 300054249 Product: Alum. Turnbuckle Shaft 3x32mm (2) blue Turnbuckle shafts allow adjustment of length without removing adjusters. These components are crafted in lightweight and durable aluminum. Parts feature a stylish blue anodized finish. Scope of delivery: 2x Threaded Rods Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
Alum. Turnbuckle Shaft 3x42mm (2) blue
300054250€9.39
Article number: 300054250 Product: Alum. Turnbuckle Shaft 3x42mm (2) blue Turnbuckle shafs allow for length adjustment without removing the adjusters. These components are made of lightweight and durable aluminum. Parts have an elegant blue anodized finish. Scope of delivery: 2x Threaded Rods Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
Alum. Turnbuckle Wrench blue
300053602€14.99
Article number: 300053602 Product: Alum. Turnbuckle Wrench blue The professional line when it comes to model building tools. Clamping axle wrench for 3.0 mm for all vehicles with 3mm adjustable tie rods or camber rods. Features just the right thickness of material for easy adjusting. With handy blue aluminum handle and Tamiya logo.
RC spare parts & tuning parts
Aluminum Reinforced Tape 50mm (2)
300053351€10.291 m = €5.15
Article number: 300053351 Product: Aluminum Reinforced Tape Tamiya's adhesive aluminum tape is ideal for gas operated vehicles that have an exhaust pipe in close proximity to the polycarbonate body. The aluminum heat resistant tape acts as a shield and prevents damage to a polycarbonate body when high heat is nearby. Scope of delivery: 1x aluminum tape reinforced Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
Aluminum Spacer Set 5,5/3mm blue/silver
300053539€14.69
Article number: 300053539 Product: Aluminum Spacer Set 5,5/3mm blue/silver ★This set includes 3mm inner/5.5mm outer diameter spacers of various thicknesses: 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm and 3mm. ★Use them for a whole variety of purposes!
RC spare parts & tuning parts
Anti-Wear Grease (3g)
300053439€12.991 kg = €4,330.00
Article number: 300053439 Product: Anti-Verschleiß Fett (3g) This anti-wear grease is particularly suitable for lubricating rotating parts. Due to the high viscosity, a very good adhesion to the rotating parts is achieved. Temperature stable, the grease retains its viscosity over a wide temperature range. The fine and narrow nozzle guarantees a precise application of the grease. Area of application: differential gears, shafts, drive axles Included: 1x tube (3g) Warning! Not suitable for children under 14 years.
