RC model kits

Off-road RC cars

1:10 RC Super Clod Buster Black Edition

available from July

Article number: 300047432 Product: 1:10 RC Super Clod Buster Black Edition • This is a 1/10 scale R/C model assembly kit. Length: 480mm, width: 380mm, height: 340mm. • The stylish monster truck body is injection molded in black plastic, with great detail and realism. Metalplated parts are included to depict front grille, supercharger air intakes and roll bars. • Plastic bumper and damper components are red, giving a colorful accent. • The model is based around a bathtub chassis frame, endowed with rigid link suspension and two springs on each wheel that realize ground clearance of 55mm and a superb off-road drive. • Four-wheel steering ensures that the model has excellent handling. • Two Type 540 motors and the dedicated twin motor TEU106BK ESC give ample power via front and rear differential gears. • Stickers are a brand new design for this model. 4WD Monstertruck, assembly Kit, 2 motors, 4-Wheel steering, ABS Body (black), incl. ESC, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TA08R Chassis Kit

available from May

Article number: 300047498 Product: 1:10 RC TA08R Chassis Kit Enter a new top model in the TA08 chassis range: the TA08R takes the 2-belt driven 4WD TA08 PRO chassis (Item 58693) and loads it with a wealth of Hop-Up Options and even more some dedicated parts for great performance and drivability. Included Hop-Op Option parts: 51565: TRF419 Gear Differential Unit Aluminum Diff Joint (2pcs.) 22004: TA08 Aluminum Servo Mount 22005: TA08 Carbon Damper Stays (Front & Rear) 22016: TA08 Low Friction King Pin Balls (4pcs.) 42319: Lightweight Cross Joints for Double Cardan Joint Shafts (4pcs.) 42320: Lightweight Joint Casings for Double Cardan Joint Shafts (2pcs.) 42346: TRF420 Wheel Axles (2pcs.) 42351: TRF420 Center Pulley 42357: Cross Joints for Low Friction Assembly Universal Shafts 42359: VG O-Rings for Oil Dampers (30°) 42361: 43mm Drive Shafts for Low Friction Double Cardan Joint Shafts (2pcs.) 42363: Axle Shafts for TRF420 Double Cardan Joint Shafts (2pcs.) 42374: VG O-Rings for Gear Differentials (40°) 53823: Clamp Type Aluminum Wheel Hub (5mm Thick) 53968: 5x5mm Hard Hex Head Ball Head Connector (5pcs.) 53969: 5x8mm Hard Hex Head Ball Head Connector (5pcs.) 54121: Aluminum Horn for High Torque Servo Saver 54642: 4mm Flange Lock Nut (Black, 8pcs.) 51647: TRF420 Aluminum Front Direct Cups (2pcs.) 54704: TA07 Aluminum Steering Arm Set 54881: Aluminum Adjustable Suspension Mount (A) 54883: Aluminum Adjustable Separate Suspension Mounts (XB) 54884: Aluminum Adjustable Separate Suspension Mounts (A) 54949: TA07 Adjustable Ackerman Set 4WD assembly kit, TA-08 Chassis with Option parts, 2-belt driven, Carbon Parts, including assembly guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC The Grasshopper II (2017)

soon available again

Article number: 300058643 Product: 1:10 RC The Grasshopper II (2017) The Grasshopper II is one of Tamiya's iconic radio control car kits from the late 1980's. It was an enhanced follow up release to the original Grasshopper kit. This re-release (2017) kit features a number of updates while keeping largely faithful to the original model. Its streamlined construction process makes this kit perfect for less experienced users and R/C veterans alike, while separately sold option parts can be used to enhance the model. About the Chassis A rugged ABS resin chassis is more than up to the stresses of off-road driving, and features lightweight durable plastic suspension arms, gearboxes and so on - the result is a lightweight and durable unit. Front swing axle and rear rolling rigid suspension combine for a responsive drive, while a fully enclosed gearbox is integrated with the rear axle and has a built-in differential gear to aid smooth cornering. One-piece wheels are paired with front grooved and rear spike tires for solid performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Toyota Land Cruiser 40 CC-02

soon available again

Article number: 300058715 Product: 1:10 RC Toyota Land Cruiser 40 CC-02 Tamiya is delighted to announce the release of the Toyota Land Cruiser 40 as our new R/C model on the cross country CC-02 chassis. The Toyota Land Cruiser is one of the most famous 4WD vehicles in the world. The long-selling Land Cruiser 40 series was sold from 1960 to 1984, and employed front / rear rigid axles with leaf springs, and durable ladder frame. This R/C model assembly kit recreates the 1972 Land Cruiser FJ40V which is one of the most popular cars in that series. Included: 4WD assembly Kit, CC-02 Chassis, User Guide, ESC included, Polycarbonat Body, Type 540 Motor, oil filled Damper, ladder frame chassis WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Toyota Supra (JZA80) BT-01 2WD

soon available again

Article number: 300058733 Product: 1:10 RC Toyota Supra (JZA80) BT-01 2WD The Supra was the fourth generation of Toyota (JZA80) which was announced as a Toyota’s flagship sportscar in 1993. Its top grade RZ model employed a 3-liter inline-6 twin turbo engine capable of 280hp, 6-speed transmission, 4-wheel double wishbone suspension and ventilated disc brakes for front and rear. The muscular form and high-spec performance mesmerized fans all over the world and achieved success in motorsports races. The 2WD BT-01 chassis gives a choice of two types of wheelbase (257mm or 251mm), and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars.　(Six setups are available in total.) 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TRF421 Chassis Kit

available from May

Article number: 300042384 Product: 1:10 RC TRF421 Chassis Kit The TRF series welcomes the brand new TRF421 chassis kit. This R/C model assembly kit creates a 2 beltdriven 4WD, carbon fiber double-deck chassis. New features - such as updated drivetrain, lower deck featuring new shape, updated (one-piece or two-piece) upper deck, front and rear A-shaped upper suspension arms, adjustable front and rear caster angles, and shorter dampers - will surely provide superior performance. TRF421 Racing Chassis kit, 4WD, Carbon and Aluminium parts, A-Shape Arms, 2 Upper decks,incl. Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TT-02 Type-SRX Chassis Kit

soon available again

Article number: 300058710 Product: 1:10 RC TT-02 Type-SRX Chassis Kit Tamiya is proud to welcome a new addition – TT-02 Type-SRX Chassis Kit - to the TT-02 Type-S Series which is popular among both beginners and race users. The TT-02 Type-SRX chassis kit is an upgraded version of the TT-02 Type-S Series with enhanced durability and performance for racing. This chassis kit uses Items 22049 and 22047 with updated parts. Also, parts included in this chassis kit are chosen (more cost-effective than buying each part) for users who want to learn setup before levelling up to middle class chassis. Included Hop-up Option Parts: Item 22054: 37mm Drive Shafts for Double Cardan Joint Shafts (2pcs.) Item 22049: XV-02/TT-02 Oil Gear Differential Unit Item 22047: XV-02/TT-02 Front Direct Coupling Set (39T) Item 54981: 06 Module Hard Coated Aluminum Pinion Gear (27T) Item 54886: TRF419 Suspension Upgrade Set Item 54799: TT-02 Hi-Torque Servo Saver Set (w/Aluminum Horn) Item 54501: TT-02 Aluminum Propeller Shaft Item 54500: TT-02 High Speed Gear Set (68T) Item 53823: Clamp Type Aluminum Wheel Hub (5mm Thick) Item 53576: TRF Damper Oil Seal (4pcs.) Item 42357: Cross Joints for Low Friction Assembly Universal Shafts Item 42323: Short Ball Connector Nuts for TRF Dampers (8pcs.) Item 42143: 4mm Aluminum Serrated Wheel Nut (4pcs./Blue) Included: 4WD assembly Kit, TT-02 Chassis, fully ball bearings, 540er Torque-Tuned Motor, Option parts, Shaft driven, User Guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC TT-02D Drift Spec Chassis

soon available again

Article number: 300058584 Product: 1:10 RC TT-02D Drift Spec Chassis The TT-02 chassis is Tamiya's latest entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. The TT-02D is the Drift Spec variant that includes special parts to make it a fun to drive drifting machine. Includes Super Driftech tires (24mm width) which feature a special resin compound suited to drift driving. Includes full ball bearings and CVA (oil-filled) Super Mini shocks. Tamiya Sport-Tuned Motor and Aluminum heat sink is included. Brake disc-shaped wheel hubs (silver color) and battery holder (blue) are metal-plated parts. The TT-02 chassis offers 2 different wheelbases and tread settings without the addition of Option Parts. It also supports 10 different gear ratios. The skid-shaped underside of the bathtub type frame minimizes contact with the road surface. Body is not included in this kit. Purchase a separately-sold body of your choosing and fit it to the chassis. Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Unimog 406 Ser.900 CR-01

soon available again

Article number: 300058414 Product: 1/10 RC Unimog 406 Ser.900 CR-01 Scope of delivery: Kit model with detailed illustrated assembly instructions, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC VW Beetle Rally (MF-01X)

soon available again

Article number: 300058650 Product: 1:10 RC VW Beetle Rally (MF-01X) This is the latest release on the MF-01X chassis, and it features a rally version of a true classic car. The Volkswagen Beetle - thanks to its superlative reliability and uncomplicated upkeep - was a fixture on the global rally circuit from the 1950s through to the 1980s, and this model is inspired by such rallying Beetles. What better chassis to pair it with than the shaft-driven 4WD MF-01X, which is at home on a range of surfaces from road to flat dirt? About the Model • This is a 1/10 scale R/C model assembly kit. Length: 397mm, width: 163mm. • The model uses the 239mm L wheelbase. • The playful form of the Beetle is captured artfully in polycarbonate. Bumpers and side mirrors are recreated using separate metal-plated parts. • Front light pods and brand new rally-style stickers are included to give the model a rally car air. Rally block tires offer excellent grip. • The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension. • Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be assembled into S and M wheelbases using separately sold propeller shafts. • A host of Hop-Up Option parts are available to tune the MF-01X chassis.

On-road RC cars (2WD/4WD)

1:10 RC XM -01 Pro Chassis Kit

available from July

Article number: 300058738 Product: 1:10 RC XM -01 Pro Chassis Kit This shaft-driven 4WD chassis kit (M-chassis size) is another addition to the R/C rally line-up, and has features such as three types of wheelbase, new suspension components and a polycarbonate chassis cover. Add this chassis kit to your M-rally collection! Compatible Hop-Up Option Parts for XM-01 Chassis (NOT included!) 22046: XV-02/TT-02 Ball Differential Set (39T) 22047: XV-02/TT-02 Front Direct Coupling Set (39T) 22048: XV-02 Slipper Clutch Set 22049: XV-02/TT-02 Oil Gear Differential Unit 22050: 06 Module Spur Gear (70T) for XV-02 Gear Differential (Use with Item 22049 XV-02/TT-02 Oil Gear Differential Unit.) 22053: XV-02 Aluminum Spur Gear Holder 22055: XV-02 Aluminum Adjustable Suspension Mount (XH) 22056: XV-02 Aluminum Damper Stay Mount 22064: TT-02 Type-SRX Front Direct Cup Joints (Use with Item 22046 XV-02/TT-02 Ball Differential Set (39T) or Item 22047 XV-02/TT-02 Front Direct Coupling Set (39T).) 22072: XV-02 Aluminum Steering Arms (L/R) 54802: TB-05 Aluminum Steering Bridge 54884: Aluminum Adjustable Separate Suspension Mounts (A) 4WD assembly kit, XM-01 Chassis, 3-different WB, Chassis-Cover, many Hop-Up parts included, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC 40ft.Container Semi-Trail.Maersk

available in stores

Article number: 300056326 Product: 1/14 RC 40ft.Container Semi-Trailer Maersk Cargo containers are used for shipping products and raw materials all around the world and ISO. This is a replica of a 40ft. regular height container which can be connected to any Tamiya's 1/14 scale Tractor Trucks.     Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC Grand Hauler Customized

available in stores

Article number: 300056344 Product: 1/14 R/C Grand Hauler Meet the latest addition to the 1/14 scale Tractor Trucks series! This model is based upon that Tamiya classic, the King Hauler (Item 56301). The King Hauler body is given an overhaul with numerous newly-designed parts inspired by the modern day trend of tractor truck customization. A number of metal and metal-plated resin parts further add to the mood of the model. Its longer frame gives the model proportions reminiscent of show trucks. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 692mm, width: 190mm, height: 300mm. • The realistic, lengthened body features newly-designed parts depicting front and rear bumpers, front grille, air cleaners and muffler covers. Muffler covers are made from metal tubing. • Features a tough ladder frame construction with aluminum side channels and resin cross members. Realistic drivetrain setup sees the front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Metal leaf spring dampers with built-in coil springs provide durable suspension. • Newly-designed 1/14 scale driver figure included. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with the tractor truck option parts (TROP) Items 56511, 56512, 56513, 56515, 56524, 56526 and 56530. Pair with Multi-Function Control Unit MFC-01 (Item 56511) and MFC-03 (Item 56523) for super-realistic LED lights and sounds.   Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC Knight Hauler Kit

available in stores

Article number: 300156314 Product: 1/14 RC EU Truck Volvo FH12 Globetrotter 420 Kit The FH series was released in the fall of 1993 and became Volvo's primary truck. The following year, it was awarded the prestigious "Truck of the Year" title. It's huge 12-liter inter cooled turbo diesel engine is known as the "Euro 2", and is the result of state-of-the-art engineering technology. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC MAN TGX 18.540 (red prepainted)

soon available again

Article number: 300056332 Product: 1/14 RC MAN TGX 18.540 (red prepainted) This special edition of the 1/14 R/C MAN TGX 18.540 4x2 XLX assembly kit comes with body components which are pre-painted in TS-39 Mica Red. A clear urethane topcoat is applied to ensure the finish resists scuffs and remains durable. Required accessories: • 4-channel system is recommended for potential future options and 3-speed operation. • 7.2V battery and charger • ESC (unless you are using MFC Unit #56511)

RC trucks

1:14 RC MAN TGX 26.540 LightMet. Blue PP

soon available again

Article number: 300056370 Product: 1/14 MAN TGX 26.540 6x4 Light Blue Edition This is a color variation of the R/C Man TGX 26.540 6x4 XLX (original: Item 56325) which depicts a vehicle produced by MAN Company and awarded "The 2008 Truck of the Year." This model is great for those without the time or confidence to apply a paint job to their kit, as cab parts molded in blue are pre-painted in TS-54 Light Metallic Blue and given a urethane coating for a beautiful, lasting finish.

RC trucks

1:14 RC MB Arocs 3348 Tipper Red/Silver

soon available again

Article number: 300056361 Product: 1:14 RC MB Arocs 3348 Tipper Red/Silver This is a special edition of the R/C Mercedes Benz Arocs tipper truck (Item 56357), the stylish 3-axle truck with movable bed and distinctive bucket tooth grille. It is a great option for those without the time or confidence to apply a paint job to their kit, as parts come pre-painted in TS-8 Italian red (cab, H, K, and M parts) and TS-17 Gloss aluminum (rear bed and CC parts), and given a urethane coating for a beautiful, lasting finish. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 576mm, Width: 190mm, height: 267mm. • The Arocs 3348 form is recreated by an injection molded body, with separate side mirrors and visor, etc. • Cab, H, K, and M parts are molded in red PS and pre-painted in Italian red (TS-8), while bed and CC parts are molded in gray ABS and pre-painted in Gloss aluminum (TS-17). All have a urethane top coat. • The 3-axle chassis has a tough ladder frame with aluminum side channels and resin cross members. • Truck bed section is comprised of metal subframe and resin panel sections for superb durability. • Compatible with Electric Actuator Set (Item 56545) for realistic truck bed motion. • TR mighty-tuned motor (35T) provides twin rear axles with ample power to carry loads in the bed. • Rear tires, rear fenders and taillights have dedicated tipper truck model designs. • 3-speed transmission can be controlled via a separately sold 4ch R/C transmitter. • Metal leaf spring dampers with built-in coil springs provide durable suspension. • Compatible with MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.

RC trucks

1:14 RC MB Arocs 3363 6x4 ClassicSpace

soon available again

Article number: 300056352 Product: 1:14 RC MB Arocs 3363 6x4 ClassicSpace This 1/14 scale tractor truck recreates the Mercedes-Benz Arocs 3363 3-axle truck, which is the first narrow bodied European tractor model in the Tamiya Tractor Truck Series. The full-size subject is the German company's heavy duty tractor head that debuted in 2013. Powered by a 630hp 15.6-liter inline-6, the actual Arocs is capable of hauling massive loads of up to 250 tons. The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold Tamiya 4-channel transmitter. Scope of delivery: Kit model with detailed illustrated assembly instructions, 540 electric motor, ABS body, 3-speed manual transmission Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC Scania R620 6x4 High.blue paint.

soon available again

Article number: 300056327 Product: 1/14 RC Scania R620 6x4 Highome blue painted This is a special edition kit of the 1/14 R/C Scania R620 6x4 Highline. The kit includes body components that are pre-painted in Tamiya Synthetic Lacquer TS-51 Racing Blue paint. The body is also clear coated with a urethane clear topcoat.     Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC Truck Ford Aeromax Kit

soon available again

Article number: 300056309 Product: 1/14 RC Truck Ford Aeromax Kit The massive American rig has joined Tamiya's 1/14 scale tractor truck stable. Tamiya's model of the Ford Aeromax tractor truck boasts both large scale realism and authentic functions. Servo-shifted 3-speed transmission is mounted at the front of the aluminum ladder frame.     Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC Truck XxX/X

soon available again

Article number: 300056371 Product: 1:14 RC SCANIA 770S 8x4/4 Tamiya is proud to welcome the Scania 770 S 8x4/4 to the 1/14 R/C Tractor Truck Series. The Scania 770 S heavy trailer head is the newest heaviest-class trailer head added to the NEXT GENERATION SCANIA series in 2020. This S series features a V8 turbo engine capable of 770hp. The 8x4/4 means double-axle 4-wheel drive at the rear and double-axle 4-wheel steering at the front. Included: Assembly Kit of Scania 770S, 1/14th scale, Auxiliary machinery tower, aerodynamic Package, Aluminium Frame, double front Axle steering, lift axle WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

RC trucks

1:14 RC VOLVO FH12 Globetrotter 420 Kit

soon available again

Article number: 300156312 Product: 1/14 RC EU Truck Volvo FH12 Globetrotter 420 Kit Tamiya is delighted to announce that this classic is once again to be produced, returning another big name to the 1/14 Scale Tractor Truck Series. The R/C model was first released back in 2000 and recreates the Volvo FH12, a huge-selling vehicle with 12-liter turbocharged "Euro 2" engine that won the Truck of the Year in 1994. About the Model • This is a 1/14 scale R/C model assembly kit. • Length: 440mm, width: 188mm, height: 295mm, wheelbase: 272mm • The stylish form of the FH12 is accurately captured. • The chassis utilizes a tough ladder frame with aluminum side channels. A realistic drivetrain setup sees the front mounted motor powering the rear axle. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Highly realistic suspension employs metal leaf springs and friction dampers. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC Volvo FH16 Tow Truck 8x4

available in stores

Article number: 300056362 Product: 1:14 RC Volvo FH16 Tow Truck 8x4 Our series of ultra-realistic 1/14 scale R/C trucks is a byword for fun, and offers a wide variety of different models and truck types. Now, it is to expand with another brand new type – the tow truck, which makes its living towing heavy duty vehicles such as tractor trucks. It promises a completely different element of enjoyment to predecessors in the series. The FH16 is marketed by Volvo, a renowned actor in the global commercial vehicle market. The FH Series includes a 750hp 16.1-liter turbocharged inline-6 engine FH16 Globetrotter 750 8x4 tow truck. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 750mm, width: 195mm, height: 300mm. • Features a detailed molded plastic depiction of the cab, with photo-etched front grille and interior features. • This model’s front axles feature the first twin steering system seen in the Tamiya 1/14 Truck series. • The rear boom and underlift mechanism features plenty of metal components for excellent durability. Employ the new separately sold Actuator Set (Item 56553) to control them via R/C transmitter. • Ladder frame has aluminum side channels and resin cross members. Power from the front motor is delivered to the two rear axles via propeller shaft. A built-in differential gear on each axle enables smooth cornering. • Highly-realistic suspension utilizes metal leaf springs and friction dampers. The model enjoys easy driving thanks to the float-mounted die-cast front and reinforced resin rear axles. • Three-speed transmission allows shifting via transmitter (only one gear is usable when towing). • Headlights and taillights can be lit up with separately sold LEDs, and the model is compatible with Item 56523 Tractor Truck Multi-Function Control Unit "Euro-Style" (MFC-03). • Compatible TROP truck option parts: 56523, 56531, 56538, 56548, 56549, 56550, 56551, 56553. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC XB FH16 Timber Truck Finished

available in stores

Article number: 300023805 Product: 1:14 RC XB FH16 Timber Truck Finished About the Model • This is a 1/14 scale ready-to-run R/C model. Length: 733mm, width: 194mm, height: 306mm. • The refined form of the truck is depicted in great detail by the plastic molded body. It is painted in TS-54 Light metallic blue. • Depictions of stakes and cab rear headboard use a durable combination of resin and metal. • The Tamiya 3-axle chassis utilizes a ladder frame with aluminum side channels and resin cross members. A realistic drivetrain setup sees the front mounted motor powering twin rear axles. • 3-speed transmission enables authentic gear changes while driving. • Highly realistic suspension employs metal leaf spring dampers and friction dampers. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • 4-channel R/C system and MFC-03 Multi-Function Control Unit are pre-installed, for super-realistic control linked to lights, sounds and vibration. • A range of separately sold Tractor Truck Option Parts (TROP) products are available to refine performance!

RC trucks

1:14 RC XB MB Actros 3363 Green Full Op.

available in stores

Article number: 300023801 Product: 1/14 RC XB MB Actros 3363 Green Full Option The 1/14 R/C Mercedes Actros 3363, star at Spielwarenmesse 2016 in Nuremberg, is now being made available as a factory finished model with an eye-catching paint job!

RC trucks

1:14 RC XB MB Arocs 3363 Full Op Fin

available in stores

RC tanks

1:16 RC Brit. Centurion Mk.III w/Option

available in stores

Article number: 300056045 Product: 1:16 RC Brit. Centurion Mk.III w/Option Tamiya is delighted to announce that our 1/16 R/C tank series welcomes a new addition – this time, the Centurion Mk. III. The Centurion was developed as a heavy cruiser tank to counter the powerful German Army’s tanks in the 1942 during the WWII. The Mk. III was perhaps the most polished Centurion variant, equipped with the L/66.7 20 pounder long barrel gun. It was deployed in the Korean War in 1950, and showed off overwhelming strength which saved the Allied forces from crisis many times. The production reached about 2,800 between 1948 and 1956. After the Korean War, the Mk. III were deployed in European countries but also other areas such as India, Israel, and Egypt with their formidable force.

RC tanks

1:16 RC Panzer Leopard 2A6 Full Option

available in stores

Article number: 300056020 Product: 1:16 RC Panzer Leopard 2A6 Full Option Widely recognized as the best modern day Main Battle Tank (MBT), Tamiya introduces the latest German Leopard 2 tank, the Leopard 2 A6, to the 1/16 scale R/C tank series. Tamiya's biggest R/C tank ever, it's just like driving the real thing! About the Leopard 2 A6 Used by more than 10 European nations, Germany's Leopard 2 tanks are a perfect balance of firepower, protection, mobility and availability. With the Leopard 2A5 regarded as the most powerful tank in the world with superior protection and fire power, the latest Leopard 2, the 2A6, features an even more powerful weapon system. The Leopard 2A5 featured replaceable wedge shaped armor on the turret, improved PERI-R 17 panoramic Commander's sight with thermal vision, spall liner on the turret interior for protection against splinters, all-electric gun control and stabilization system for easy maintenance and reduced noise, GPS navigation system, electro-pneumatic driver's hatch and a CCD camera mounted on the rear of tank for high-speed reversing. The Leopard 2A6 featured improved firepower including a 55 caliber 120mm smoothbore main gun utilizing kinetic energy LKE II ammunition for higher muzzle speed and lethality. The 2A6 has been employed by the German 403 tank battalion since March 2001, and is scheduled to replace all German 2A5 tanks by 2006. The use of the 2A6 continues to spread throughout Europe with the Netherlands, Spain and Greece adopting the 2A6 for their main battle tank. With continued improvements the 2A6 continues to set new standards as the world's best MBT. Scope of delivery: Kit Leopard 2A6 incl. T-07 control unit (for driving control, sound and light effects) and operating/assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC tanks

1:16 RC Panzer Tiger 1 Full Option

available from May

Article number: 30006010 Product: 1/16 RC Panzer Tiger 1 Full Option Tamiya has put incredible power and versatility of the German Tiger I in your fingertips with this 1/16 scale, fully functional R/C tank. Just some of the many functions this tank is capable of have been recorded in the video clips below. First check out the firing of the main cannon, complete with true to life flash and cannon recoil. The shot is so powerful that it actually causes the tank itself to recoil, just like the full size Tiger I. Then, click on the next image to see the cannon rotate, tracking down the enemy and preparing to fire. Next is the firing of the authentically recreated 7.92mm MG34 machine gun! Finally, take a gander at how the Tiger I moves on its durable resin and metal tracks. *1/16 scale Radio Controlled Assembly Model Kit (overall length: 530mm, overall width: 232mm) *A four-channel RC unit is necessary to operate this kit. Two 7.2V Tamiya Racing Packs (or equivalent) and charger are also required. Powerful Engine Sound Just about every sound the real Tiger I made can be made on Tamiya's 1/16 scale Tiger I. When the tank is switched on, either a manual crank start sound, or an automatic engine start sound is heard. After your engine is turned over, its time to move the tank around. As you accelerate, the engine thundering increases just like the real Tiger I. Stop the tank, and the sound of authentic idling begins. Once you have located your target, rotate the massive turret and listen to the grinding of gears of the real German war machine. The more you control this R/C tank, the more you will feel like the commander of the full size Tiger I ! The front-mounted gearbox contains two Type 380 motors that can operate together or individually to produce forward/reverse running and pivot turning. Metal torsion bars and suspension arms combine with the wide tracks to smoothly absorb bumps and dips in the terrain and provide high maneuverability. In addition, realistic engine sounds accompany the tank as it starts up, drives, and stops to idle. Hull-mounted main gun can be elevated, depressed, and swung to the left and right.

RC tanks

1:16 RC US Panzer Sherman M4 Full Option

available from July

Article number: 300056014 Product: 1/16 RC US Panzer Sherman M4 Full Option Since Tamiya is behind this R/C M4 Sherman, authenticity in scale, body detailing, and working suspension goes without saying. Acoustic authenticity is also high on the score sheet, through the digitally recorded sounds of a real Continental R975-C4 9-cylinder engine, which roars from the bowls of the tank as it runs. And speaking of the running, you will be able to recreate all the speed and nimbleness of the full-sized M4 Sherman with state-of-the-art R/C technology. Finally, with the addition of "Battle System" infrared tank scoring system, you can reenact one of the most classic military clashes of all time-Tiger vs. Sherman. 2-Channel R/C System for Complete Range of Movement 1. Forward/reverse over wide range of speed. 2. Gradual turning, pivot turning, super pivot turning. 3. Rotation of turret, raising/lowering of cannon. 4. Illuminating head and taillights. 5. Cannon firing (w/light and sound effects). 6. Machine gun firing (w/light and sound effects). *For 3-6, tank must be in stopped position. Roar of the Continental R975-C4 9-cylinder Engine All the power of the real Continental radial engine can be experienced on Tamiya's new R/C M4 Sherman tank. Listen to the deep start-up sound followed by throaty idling, and then hear the auto-choke activate as the engine kicks over. As you put the tank through its paces, the sound of the engine changes, just like the real M4 Sherman. Firing of the cannon, machine gun, raising/lowering of the cannon, etc.-all the action is linked with sound for an unbelievably realistic tank experience. Suddenly, you are the division commander all the power of the legendary U.S. tank is at your fingertips! The front-mounted gearbox contains two Type 380 motors that can operate together or individually to produce forward/reverse running and pivot turning. Metal torsion bars and suspension arms combine with the wide tracks to smoothly absorb bumps and dips in the terrain and provide high maneuverability. In addition, realistic engine sounds accompany the tank as it starts up, drives, and stops to idle. Hull-mounted main gun can be elevated, depressed, and swung to the left and right.

Off-road RC cars

1:18 RC Dynahead 6x6 (G6-01TR)

soon available again

Article number: 300058660 Product: 1:18 RC Dynahead 6x6 (G6-01TR) Tamiya is delighted to announce the latest 6-wheeled beast in our line-up, the Dynahead 6x6, which takes inspiration from the big trucks used in the gruelling offroad world of truck trials. It appears on a new chassis variant named the G6-01TR, based upon the G6-01, with hub reduction axles providing extra height for taking on rougher terrain. With a stylish body penned by self-proclaimed "hyper designer" Takayuki Yamazaki from Japan, (Dual Ridge, etc.) it is sure to be a fun addition to your R/C garage! About the Model • This is a 1/18 scale 6WD R/C model assembly kit. Length: 453mm, width: 244mm, height: 232mm. • Wheelbase: 173+126mm. • The cab-over truck body is a brand new design by Takayuki Yamazaki. • Hub reduction axles raise ground clearance by 15mm; in conjunction with the traction provided by a 37.35:1 gear ratio (with kit-included 18T pinion), the Dynahead 6x6 has awesome off-road and crawling capability! • 5-spoke wheels are paired with V-tread block tires (Item 53854) for superlative bite. • With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable.

On-road RC cars (2WD/4WD)

Audi A4 quattro Touring TT01E

available from May

Article number: 300047414 Product: Audi A4 quattro Touring TT01E • This is a 1/10 scale R/C model assembly kit.    Length: 454mm, width: 186mm. • The Audi A4 form is captured accurately in polycarbonate. • Separate molded parts recreate side mirrors and sporty rear wing. • Stickers are included to recreate markings for both no.5 and    no.45 cars (they raced in different touring car series), with    masking stickers to help during the paint job. • 18-spoke wheels are molded in Silver, and paired with slick tires. • The TT-01 Type-E chassis features shaft-driven 4WD for easy    handling, and great customizability. • A wide range of option parts is available to tune the TT-01    Type-E chassis.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

Manta Ray (2018)

available from May

4WD assembly kit, clear polycarbonate Body, ESC included, Type 540 Motor, user guide   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Opel Calibra Bundle

soon available again

Product bundles consisting of: 1:10 RC Opel Calibra V6 Cliff (TT-01E) | RC-Reflex Start Electric Set | PS-5 Black Polycarbonate 100ml Article number: 300058701 Product: 1:10 RC Opel Calibra V6 Cliff (TT-01E) The Calibra V6 took part in the 1995 German Touring Car Championship (DTM). Run by the Joest Team and driven by JJ.Lehto, the Calibra had a 2.5L V6 engine with 420hp. The Opel Calibra V6 "Cliff" is based on the proven TAMIYA TT-01E chassis with four-wheel drive. A large selection of tuning parts allows the model to be upgraded to a racing machine and is in no way inferior to the original. Required accessories: Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger, paint for polycarbonate body (TAMIYA PS-) 4WD kit model, TT-01E chassis, elect. Speed controller, 540 torque tuned motor, polycarbonate body with add-on parts, gimbal drive, spring struts, independent suspension, tub frame chassis, slick tyres with good grip, instructions. Article number: 500500099 Product: RC-Reflex Start Electric Set The RC-Reflex Start electric set includes all accessories for operating TAMIYA RC kits in 1:10 scale. The compact 3-channel transmitter combines handiness and precision. The set also includes a powerful NiMH battery, a USB charger, a 3-channel receiver, a CS-3 steering servo and 4 x AAA transmitter batteries. 3-channel 2.4 GHz transmitter, 3-channel mini receiver, USB charger, 7.2 V / 2500 mAh drive battery, CS-3 steering servo, 4 x AAA transmitter batteries and instructions. Article number: 300086005 Product: PS-5 Black Polycarbonate 100ml TAMIYA PS = Polycarbonate "Lexan" spray paints are specially developed to paint unpainted kit bodies. Numerous colour shades are available to choose from and allow models to be customised. Each can contains 100ml of high opacity paint which is oil and fuel resistant, this allows use on nitro models. Before use, the body should be degreased and cleaned. Best painting results are achieved when thin layers of paint are sprayed from a distance of approx. 30 cm. The paint should be allowed to dry slightly between spraying so that no "tears" occur. Always follow the painting instructions of models and on the can. Contents: 100 ml spray can with spray head   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC 1st Try Plasma Edge II L/G TT02B

Factory sold out

Article number: 300057988 Product: 1:10 RC 1st Try Plasma Edge II L/G TT02B Tamiya is delighted to announce a great option for R/C beginners – a new product pairing the First Try kit version of the TT-02B offroad chassis, with a flashy painted Plasma Edge II body (Item 47454). Users can still enjoy the informative and rewarding process of building a Tamiya chassis, but with some of the trickier sections pre-assembled. The TT-02B is a highly adaptable and beginner-friendly chassis itself, with 4-wheel double wishbone suspension and shaft-driven 4WD giving great performance onand off-road.

RC buggys (2WD/4WD)

1:10 RC The Grasshopper'05 Candy Green

Factory sold out

Article number: 300047348 Product: 1:10 RC The Grasshopper 2005 Candy Green Tamiya welcomes a further limited edition re-issue of the Grasshopper Candy Green Edition - the latest production was in 2021. Included: 2WD assembly kit, Vintage Re-Release Length: 389mm, ESC included, pre-painted ABS Body in Candy Green WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

RC trucks

1:14 RC 40ft NYK Container Semi-Trailer

Factory sold out

Article number: 300056330 Product: 1:14 RC 40ft NYK Container Semi-Trailer Nippon Yusen Kaisya (NYK) is one of the largest shipping companies in the world. This is the Tamiya replica in 1/14 scale and it is the second container model released in the Tractor Trailer R/C category. The container features an aluminum frame with durable ABS front, top, and side panels. The well-known NYK logos are reproduced on the included vinyl sticker sheet, and the container can be detached from the semi-trailer after assembly. The 3-axle semi-trailer chassis comes with a realistically reproduced leaf-spring suspension. This semi-trailer can be connected to any Tamiya 1/14 R/C Tractor Truck and a variety of Option Parts can also be installed for enhanced realism. Scope of delivery: Kit container, detailed assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC LKW MAN TGX 26.540 XLX 6x4 3Axle

Factory sold out

Article number: 300056325 Product: 1:14 RC LKW MAN TGX 26.540 XLX 6x4 3Axle The latest addition to Tamiya"s 1/14 scale R/C Tractor Truck series is the MAN TGX 26.540 6x4 XLX. This impressive truck, which made its debut at the 2007 European Transport Road Show in Amsterdam, was the winner of the 2008 Truck of the Year award. It features two rear axles which assist in the carrying of heavy loads over long distances. It is powered by an in-line 6 cylinder 12.4 liter turbocharged diesel engine which meets the stringent Euro 5 emissions standards to make it more environmentally friendly. Scope of delivery: Kit MAN TGX 26.540 with detailed and illustrated building instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Porsche 911 GT3 CUP08 (TT-01E)

Factory sold out

Article number: 300047429 Product: Porsche 911 GT3 CUP08 (TT-01E) Tamiya is delighted to announce this product, which sees the stylish Porsche 911 GT3 Cup VIP 2008 body released in an assembly kit for the first time! (It was previously released as an XB model – Item 84059.) The body depicts a car from the one-make Porsche Supercup series in 2008. The model is based upon the proven shaft-driven 4WD chassis TT-01 Type-E. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 465mm, width: 195mm, height: 134mm. • The elegant 911 form is captured accurately in polycarbonate. Front and rear light cases are compatible with separately sold LEDs for a lit-up model. • Separate molded parts recreate side mirrors and sporty rear wing. • Stickers are included to recreate a range of markings and logos. • Stylish wheels are molded in Silver, and paired with slick tires. • This model runs on the short wheelbase (251mm) version of the TT-01 Type-E chassis, which features shaftdriven 4WD for easy handling, and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis.