On-road RC cars (2WD/4WD)
On-road RC cars (2WD/4WD)
1:10 RC Mercedes-AMG GT3 (TT-02)
300058639soon available again
Article number: 300058639 Product: 1:10 RC Mercedes-AMG GT3 (TT-02) Tamiya continue to expand our range of kits on the entry level TT-02 with this stunning new release. It depicts the fabulous body of the Mercedes-AMG GT3 car, which was created for the GT3 class of racing from 2016 onwards. The 6.3-liter V8 powered car has quickly become a modern legend with race results like a clean sweep of the top 4 in a 2016 Nürburgring 24-hour race. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 453mm. • The luxurious, powerful form of the Mercedes-AMG GT3 is recreated in polycarbonate. • Separately molded parts are included in the kit to recreate side mirrors and the distinctive rear wing. • PS-63 Bright Gun Metal (Item 86063) is a new Tamiya Color spray for polycarbonate, formulated especially for this model. It recreates the standard works color (requires a coat of PS-55 Flat Clear on outside of body). • The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis. • Comes with the 12-spoke wheels used in Item 58619. • Stickers are included to recreate the markings of the car, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. • Please note that R/C equipment and battery pack are separately required. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Mercedes-Benz C11 1990 Gr.C 2WD
300047484available from May
Article number: 300047484 Product: 1:10 RC Mercedes-Benz C11 1990 Gr.C 2WD Tamiya welcomes back the 1/10 R/C 1990 Mercedes-Benz C 11 which was released as Item 58088 in 1990 and Item 58351 (finished body) in 2004. Although it’s been about 18 years since the last release, this model is still popular among R/C fans. Enjoy running this model with various kinds of chassis setup! WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Mitsubishi Lancer Evo V (TT-02)
300058713soon available again
Article number: 300058713 Product: 1:10 RC Mitsubishi Lancer Evo V (TT-02) Tamiya is proud to announce the release of the Mitsubishi Lancer Evolution V as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The Mitsubishi Lancer Evolution 5th generation model took part in global rally races in 1998 and achieved both Maker’s and Driver’s Championships. This car featured a powerful body with bulging fenders, louvers and air intakes on the hood, and rear wing. This kit depicts it as a road car. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC Porsche 911 GT3 (992) TT-02
300058712soon available again
Article number: 300058712 Product: 1:10 RC Porsche 911 GT3 (992) TT-02 Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC RAYBRIG NSX Concept-GT (TT-02)
300058599soon available again
Article number: 300058599 Product: 1/10 RC RAYBRIG NSX Concept-GT (TT-02) The Raybrig NSX Concept-GT is also released on the reliable shaft-driven 4WD of the TT-02 Chassis. The racing car was developed to race in the 2014 Japanese Super GT Series, and features a 1.6-liter turbocharged direct injection engine with anti-lag, plus a midship layout that optimizes distribution of car's weight, particularly taking into account its unique hybrid system. About the Model • This is a 1/10 scale R/C model assembly kit. Wheelbase: 257mm. • The durable polycarbonate body accurately captures the low nose and complex make up of the front and rear ends. • The TT-02 is a highly versatile and easy-to-maintain chassis. • Separate parts are included to recreate dynamic rear wing and unique door mirrors. • Comes with black 10-spoke wheels. • Includes body markings and masking stickers for use when painting the model. • A wide range of option parts is available to tune and customize TT-02 Chassis cars. • Please note that R/C equipment and battery pack are separately required. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC TA08R Chassis Kit
300047498available from May
Article number: 300047498 Product: 1:10 RC TA08R Chassis Kit Enter a new top model in the TA08 chassis range: the TA08R takes the 2-belt driven 4WD TA08 PRO chassis (Item 58693) and loads it with a wealth of Hop-Up Options and even more some dedicated parts for great performance and drivability. Included Hop-Op Option parts: 51565: TRF419 Gear Differential Unit Aluminum Diff Joint (2pcs.) 22004: TA08 Aluminum Servo Mount 22005: TA08 Carbon Damper Stays (Front & Rear) 22016: TA08 Low Friction King Pin Balls (4pcs.) 42319: Lightweight Cross Joints for Double Cardan Joint Shafts (4pcs.) 42320: Lightweight Joint Casings for Double Cardan Joint Shafts (2pcs.) 42346: TRF420 Wheel Axles (2pcs.) 42351: TRF420 Center Pulley 42357: Cross Joints for Low Friction Assembly Universal Shafts 42359: VG O-Rings for Oil Dampers (30°) 42361: 43mm Drive Shafts for Low Friction Double Cardan Joint Shafts (2pcs.) 42363: Axle Shafts for TRF420 Double Cardan Joint Shafts (2pcs.) 42374: VG O-Rings for Gear Differentials (40°) 53823: Clamp Type Aluminum Wheel Hub (5mm Thick) 53968: 5x5mm Hard Hex Head Ball Head Connector (5pcs.) 53969: 5x8mm Hard Hex Head Ball Head Connector (5pcs.) 54121: Aluminum Horn for High Torque Servo Saver 54642: 4mm Flange Lock Nut (Black, 8pcs.) 51647: TRF420 Aluminum Front Direct Cups (2pcs.) 54704: TA07 Aluminum Steering Arm Set 54881: Aluminum Adjustable Suspension Mount (A) 54883: Aluminum Adjustable Separate Suspension Mounts (XB) 54884: Aluminum Adjustable Separate Suspension Mounts (A) 54949: TA07 Adjustable Ackerman Set 4WD assembly kit, TA-08 Chassis with Option parts, 2-belt driven, Carbon Parts, including assembly guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Toyota Supra (JZA80) BT-01 2WD
300058733soon available again
Article number: 300058733 Product: 1:10 RC Toyota Supra (JZA80) BT-01 2WD The Supra was the fourth generation of Toyota (JZA80) which was announced as a Toyota’s flagship sportscar in 1993. Its top grade RZ model employed a 3-liter inline-6 twin turbo engine capable of 280hp, 6-speed transmission, 4-wheel double wishbone suspension and ventilated disc brakes for front and rear. The muscular form and high-spec performance mesmerized fans all over the world and achieved success in motorsports races. The 2WD BT-01 chassis gives a choice of two types of wheelbase (257mm or 251mm), and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. (Six setups are available in total.) 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC TRF421 Chassis Kit
300042384available from May
Article number: 300042384 Product: 1:10 RC TRF421 Chassis Kit The TRF series welcomes the brand new TRF421 chassis kit. This R/C model assembly kit creates a 2 beltdriven 4WD, carbon fiber double-deck chassis. New features - such as updated drivetrain, lower deck featuring new shape, updated (one-piece or two-piece) upper deck, front and rear A-shaped upper suspension arms, adjustable front and rear caster angles, and shorter dampers - will surely provide superior performance. TRF421 Racing Chassis kit, 4WD, Carbon and Aluminium parts, A-Shape Arms, 2 Upper decks,incl. Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC TT-02 Type-SRX Chassis Kit
300058720soon available again
Article number: 300058710 Product: 1:10 RC TT-02 Type-SRX Chassis Kit Tamiya is proud to welcome a new addition – TT-02 Type-SRX Chassis Kit - to the TT-02 Type-S Series which is popular among both beginners and race users. The TT-02 Type-SRX chassis kit is an upgraded version of the TT-02 Type-S Series with enhanced durability and performance for racing. This chassis kit uses Items 22049 and 22047 with updated parts. Also, parts included in this chassis kit are chosen (more cost-effective than buying each part) for users who want to learn setup before levelling up to middle class chassis. Included Hop-up Option Parts: Item 22054: 37mm Drive Shafts for Double Cardan Joint Shafts (2pcs.) Item 22049: XV-02/TT-02 Oil Gear Differential Unit Item 22047: XV-02/TT-02 Front Direct Coupling Set (39T) Item 54981: 06 Module Hard Coated Aluminum Pinion Gear (27T) Item 54886: TRF419 Suspension Upgrade Set Item 54799: TT-02 Hi-Torque Servo Saver Set (w/Aluminum Horn) Item 54501: TT-02 Aluminum Propeller Shaft Item 54500: TT-02 High Speed Gear Set (68T) Item 53823: Clamp Type Aluminum Wheel Hub (5mm Thick) Item 53576: TRF Damper Oil Seal (4pcs.) Item 42357: Cross Joints for Low Friction Assembly Universal Shafts Item 42323: Short Ball Connector Nuts for TRF Dampers (8pcs.) Item 42143: 4mm Aluminum Serrated Wheel Nut (4pcs./Blue) Included: 4WD assembly Kit, TT-02 Chassis, fully ball bearings, 540er Torque-Tuned Motor, Option parts, Shaft driven, User Guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC TT-02D Drift Spec Chassis
300058584soon available again
Article number: 300058584 Product: 1:10 RC TT-02D Drift Spec Chassis The TT-02 chassis is Tamiya's latest entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. The TT-02D is the Drift Spec variant that includes special parts to make it a fun to drive drifting machine. Includes Super Driftech tires (24mm width) which feature a special resin compound suited to drift driving. Includes full ball bearings and CVA (oil-filled) Super Mini shocks. Tamiya Sport-Tuned Motor and Aluminum heat sink is included. Brake disc-shaped wheel hubs (silver color) and battery holder (blue) are metal-plated parts. The TT-02 chassis offers 2 different wheelbases and tread settings without the addition of Option Parts. It also supports 10 different gear ratios. The skid-shaped underside of the bathtub type frame minimizes contact with the road surface. Body is not included in this kit. Purchase a separately-sold body of your choosing and fit it to the chassis. Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC VW Beetle Rally (MF-01X)
300058650soon available again
Article number: 300058650 Product: 1:10 RC VW Beetle Rally (MF-01X) This is the latest release on the MF-01X chassis, and it features a rally version of a true classic car. The Volkswagen Beetle - thanks to its superlative reliability and uncomplicated upkeep - was a fixture on the global rally circuit from the 1950s through to the 1980s, and this model is inspired by such rallying Beetles. What better chassis to pair it with than the shaft-driven 4WD MF-01X, which is at home on a range of surfaces from road to flat dirt? About the Model • This is a 1/10 scale R/C model assembly kit. Length: 397mm, width: 163mm. • The model uses the 239mm L wheelbase. • The playful form of the Beetle is captured artfully in polycarbonate. Bumpers and side mirrors are recreated using separate metal-plated parts. • Front light pods and brand new rally-style stickers are included to give the model a rally car air. Rally block tires offer excellent grip. • The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension. • Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be assembled into S and M wheelbases using separately sold propeller shafts. • A host of Hop-Up Option parts are available to tune the MF-01X chassis.
On-road RC cars (2WD/4WD)
1:10 RC XM -01 Pro Chassis Kit
300058738available from July
Article number: 300058738 Product: 1:10 RC XM -01 Pro Chassis Kit This shaft-driven 4WD chassis kit (M-chassis size) is another addition to the R/C rally line-up, and has features such as three types of wheelbase, new suspension components and a polycarbonate chassis cover. Add this chassis kit to your M-rally collection! Compatible Hop-Up Option Parts for XM-01 Chassis (NOT included!) 22046: XV-02/TT-02 Ball Differential Set (39T) 22047: XV-02/TT-02 Front Direct Coupling Set (39T) 22048: XV-02 Slipper Clutch Set 22049: XV-02/TT-02 Oil Gear Differential Unit 22050: 06 Module Spur Gear (70T) for XV-02 Gear Differential (Use with Item 22049 XV-02/TT-02 Oil Gear Differential Unit.) 22053: XV-02 Aluminum Spur Gear Holder 22055: XV-02 Aluminum Adjustable Suspension Mount (XH) 22056: XV-02 Aluminum Damper Stay Mount 22064: TT-02 Type-SRX Front Direct Cup Joints (Use with Item 22046 XV-02/TT-02 Ball Differential Set (39T) or Item 22047 XV-02/TT-02 Front Direct Coupling Set (39T).) 22072: XV-02 Aluminum Steering Arms (L/R) 54802: TB-05 Aluminum Steering Bridge 54884: Aluminum Adjustable Separate Suspension Mounts (A) 4WD assembly kit, XM-01 Chassis, 3-different WB, Chassis-Cover, many Hop-Up parts included, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
Audi A4 quattro Touring TT01E
300047414available from May
Article number: 300047414 Product: Audi A4 quattro Touring TT01E • This is a 1/10 scale R/C model assembly kit. Length: 454mm, width: 186mm. • The Audi A4 form is captured accurately in polycarbonate. • Separate molded parts recreate side mirrors and sporty rear wing. • Stickers are included to recreate markings for both no.5 and no.45 cars (they raced in different touring car series), with masking stickers to help during the paint job. • 18-spoke wheels are molded in Silver, and paired with slick tires. • The TT-01 Type-E chassis features shaft-driven 4WD for easy handling, and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
Tamiya RC Opel Calibra Bundle
BDL-300058701soon available again
Product bundles consisting of: 1:10 RC Opel Calibra V6 Cliff (TT-01E) | RC-Reflex Start Electric Set | PS-5 Black Polycarbonate 100ml Article number: 300058701 Product: 1:10 RC Opel Calibra V6 Cliff (TT-01E) The Calibra V6 took part in the 1995 German Touring Car Championship (DTM). Run by the Joest Team and driven by JJ.Lehto, the Calibra had a 2.5L V6 engine with 420hp. The Opel Calibra V6 "Cliff" is based on the proven TAMIYA TT-01E chassis with four-wheel drive. A large selection of tuning parts allows the model to be upgraded to a racing machine and is in no way inferior to the original. Required accessories: Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger, paint for polycarbonate body (TAMIYA PS-) 4WD kit model, TT-01E chassis, elect. Speed controller, 540 torque tuned motor, polycarbonate body with add-on parts, gimbal drive, spring struts, independent suspension, tub frame chassis, slick tyres with good grip, instructions. Article number: 500500099 Product: RC-Reflex Start Electric Set The RC-Reflex Start electric set includes all accessories for operating TAMIYA RC kits in 1:10 scale. The compact 3-channel transmitter combines handiness and precision. The set also includes a powerful NiMH battery, a USB charger, a 3-channel receiver, a CS-3 steering servo and 4 x AAA transmitter batteries. 3-channel 2.4 GHz transmitter, 3-channel mini receiver, USB charger, 7.2 V / 2500 mAh drive battery, CS-3 steering servo, 4 x AAA transmitter batteries and instructions. Article number: 300086005 Product: PS-5 Black Polycarbonate 100ml TAMIYA PS = Polycarbonate "Lexan" spray paints are specially developed to paint unpainted kit bodies. Numerous colour shades are available to choose from and allow models to be customised. Each can contains 100ml of high opacity paint which is oil and fuel resistant, this allows use on nitro models. Before use, the body should be degreased and cleaned. Best painting results are achieved when thin layers of paint are sprayed from a distance of approx. 30 cm. The paint should be allowed to dry slightly between spraying so that no "tears" occur. Always follow the painting instructions of models and on the can. Contents: 100 ml spray can with spray head Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
Porsche 911 GT3 CUP08 (TT-01E)
300047429Factory sold out
Article number: 300047429 Product: Porsche 911 GT3 CUP08 (TT-01E) Tamiya is delighted to announce this product, which sees the stylish Porsche 911 GT3 Cup VIP 2008 body released in an assembly kit for the first time! (It was previously released as an XB model – Item 84059.) The body depicts a car from the one-make Porsche Supercup series in 2008. The model is based upon the proven shaft-driven 4WD chassis TT-01 Type-E. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 465mm, width: 195mm, height: 134mm. • The elegant 911 form is captured accurately in polycarbonate. Front and rear light cases are compatible with separately sold LEDs for a lit-up model. • Separate molded parts recreate side mirrors and sporty rear wing. • Stickers are included to recreate a range of markings and logos. • Stylish wheels are molded in Silver, and paired with slick tires. • This model runs on the short wheelbase (251mm) version of the TT-01 Type-E chassis, which features shaftdriven 4WD for easy handling, and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis.