DEALS

Off-road RC cars

Tamiya VW Golf Bundle

Product bundle consisting of: 1:10 RC Golf MK2 GTI 16 Rally MF-01X / 1:10 wheel set classic design (4) bl.chr Article number: 300058714 Product: 1:10 RC Golf MK2 GTI 16 Rally MF-01X Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag.     Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya Toyota Chassis Bundle

Product bundle consisting of: 1:10 RC TT-02R Chassis Kit / GR SUPRA Body Article number: 300047326 Product: 1:10 RC TT-02R Chassis Kit This chassis kit gets a further limited edition re-issue - the latest production was in 2022. This refined, race spec TT-02 chassis has a wide range of option parts and components to allow you to compete at the front of the race! Article number: 300051622 Product: GR SUPRA Body Tamiya is delighted to announce that the body parts for the cutting-edge TOYOTA GR Supra are to be sold as an individual item. Set Contents/Information • The powerful, alluring body is molded accurately in lightweight    and durable polycarbonate, with separate light cases front and rear. • Features separate molded parts for side mirrors. • Marking stickers, plus masking stickers for use when painting    are included. • Compatible with 257mm wheelbase touring car chassis.     Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya Toyota Celica Bundle

Product bundle consisting of: 1:10 RC Toyota Celica GT-Four TT-02 pain / RC-Reflex Pro 3 Electric Set Article number: 300047491 Product: 1:10 RC Toyota Celica GT-Four TT-02 pain Tamiya welcomes this limited edition version of Item 58718 Toyota Celica GT-Four (ST165) (TT-02) with pre-painted, pre-cut body, pre-cut wheel arches, and pre-made body mount holes, which is great for not only beginners but also veterans. Article number: 500500091 Product: RC-Reflex Pro 3 Electric Set Optimum extension set for ARR and Assembly Kit. Especially for Cars & Boats. Recommended Accessories: Receiver ReflexWheel 3 N° 500501533 Receiver ReflexWheel 3 waterresistant N° 500501534 Receiver ReflexWheel 3 BEC N° 500501535 Receiver ReflexWheel 3 BEC/waterresistant N° 500501536 Servo CS-6, 60 Ncm N° 500502036 Servo CS-9, 98 Ncm N° 500502024 Technical data: Transmitter / receiver • Operating Voltage of transmitter 4,8 up to 6 V • two continuously controllable fully proportional channels • servo reverse for both channels (reversal of the running direction) • trimming function for accelerator and steering • Dual Rate for both channels (path limitation of the servos) • powering of receiver (without BEC) 11 V possible • Integrated Fail-Safe • plug system for Futaba and Graupner-J/R • charging socket (plus terminal inside) • battery status indicator by LED Charger • Input voltage: 100-240 V, 50-60 Hz (AC) • Charging current output 1: max. 2 A / 9 V • Charging current output 2: max. 0.5 A / 6 V • Battery types: NiMH Steering Servo • JR Plug • 6 kg throw force • Metal gear Driving battery • NiMH 7.2 V / 3000 mAh TAMIYA plug Transmitter battery NiMH Mignon 1.2 V / 2100 mAh   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Nissan Skyline GT-R V-spec II

Model-making adhesive

Tamiya Model-making accessories Bundle

Product bundle consisting of: Tamiya Cement w/Brush 40ml | Mark Fit 40ml | Tamiya Modelers Side Cutter Gray/Plastic | Tamiya Tweezers straight   Article number: 300087102 Product: Mark Fit 40ml Mark Fit is a special solvent designed to soften your model decals which will allow you to apply them onto difficult to apply areas such as bumpy and curved surfaces, providing an improved finish to your scale model. The 40ml bottle contains a convenient brush for easy application. How to Use Apply Mark Fit solvent to area where decal is to be positioned. Place decal onto the area. Slide decal into correct position by a wet finger. Use a soft cloth or cotton swab to remove excess water and any air bubbles. Apply Mark Fit over the decal again, and then use a soft cloth or cotton swab to conform it to the model's surface. Do not touch until decal dries completely. Article number: 300074093 Product: Tamiya Modelers Side Cutter Gray/Plastic This Modeler's Side Cutter is designed for use with plastic parts and is ideal for scale models and Mini 4WD products assembly. The cutter's blades are made with hardened carbon steel and will remain sharp for a long period of time. Article number: 300074004 Product: Tamiya Tweezers straight These quality straight tweezers come in handy when adding small parts to your model and for other jobs requiring precision work. Made from stainless steel with a black cationic finish for long life.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Audi V8 Bundle

Product bundle consisting of: 1:10 RC Audi V8 1992 Touringcar (TT-02) / Tuning set TT-02 / RC-Reflex Pro 3 Electric Set brown box   Article number: 300058699 Product: 1:10 RC Audi V8 1992 Touringcar (TT-02) Tamiya is delighted to welcome the 1992 Audi V8 Touring as a model on our popular TT-02 chassis. The 1992 Audi V8 Touring employed an improved 3.6-liter V8 engine, Audi’s famed quattro four-wheel drive, and an imposing body. It overcame significant ballast handicaps and showed off overwhelming strength, particularly in a podium sweep at the 1st race of the 2nd meet at the Nürburgring.   Article number: 500908234 Product: Tuning set TT-02 Tuning set for TAMIYA Chassis. Please note! ATTENTION: Use the Motor pinion (25T) only in Connection with the gear (68T). Mount the Motor into its Support on the position "H" for 23 t. Included: Pinion Gear (25T), TT-02 Speed gear set (68T), Oil shock absorber set (4 pieces), Ball bearing set (16 pieces)   Warning! Not suitable for children under 14 years.

Educational-Kits

4-Track Crawler

On-road RC cars (2WD/4WD)

1:10 RC TA08 PRO Chassis Kit

Article number: 300058693 Product: 1:10 RC TA08 PRO Chassis Kit • This is a 1/10 scale R/C touring car chassis kit. • Features Stepped-V shaped chassis which balances weight and rigidity. The battery pack and servo are positioned on a slight angle (about 10 degrees) to reduce surface contact and facilitate optimum weight distribution. • Positioning spur gear in front of motor produces stable drivability. • 2 belt-driven 4WD uses TRF420 gear differentials and steel TA07 differential joint cups. • A-arm suspension arm gives your model a low center of gravity, enhanced with laid down dampers. Camber and caster angles are adjustable by turnbuckle shafts and lower arm spacers respectively. • Comes with Super Short Big Bore size dampers. Universal shafts and full bearings give efficient drive. • Rotating body mounts by 180 degrees switches between standard and 2mm advanced body positions. • Please note that the R/C equipment, motor, battery pack, tires and body are sold separately Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Diorama texture paints

Diorama Sheet A4 Stone Paving B/medium

Article number 300087166 Product: Diorama Sheet A4 Stone Paving B/medium Part of the joy of scale modelling is the creation of a diorama, realistic scenes which display your finished model in context and take it to the next level. This sheet features realistic patterns with a raised texture printed onto a craft paper background, and they allow simple yet highly effective recreation of surfaces and textures which would be seen in many typical diorama such as stone street paving and brick walls. •Craft paper-based material can be cut easily to the desired size and attached to a diorama base or surface using double-sided tape, Tamiya Craft Bond, wood glue, etc. •It can be painted with enamel and acrylic paints. •A4 size (297mmx210mm)     Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Wild Willy 2000 (WR-02)

Article number: 300058242 Product: 1:10 RC Wild Willy 2000 (WR-02) The Wild Willy 2 is a reproduction of the popular original Wild Willy from the mid 80s. The new Wild Willy has an all new chassis and larger tires allowing it to tread over rough terrain. Of course, the Wild Willys trade mark is the animated wheelie capability thanks to an all new wheelie bar. WR-02 Chassis: The WR-02 chassis features a heavy duty monocoque which has side frames to increase rigidity. R/C unit, motor, and battery pack are positioned along the centerline of the chassis and the motor's power is delivered to the rear wheels via a fully-enclosed gearbox equipped with a differential. A wheelie bar is fitted to enable exciting, wheels in the air driving action. 4-wheel double wishbone suspension and 2-piece steering tie-rod offer smooth steering response. Tires/wheels and the gearbox/motor come pre-assembled for ease of assembly. Requires: 2-channel radio, 7.2 volt battery & charger, and Tamiya TS paint Scope of delivery: Kit including electronic speed controller as well as detailed and illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Opel Calibra Bundle

soon available again

Product bundles consisting of: 1:10 RC Opel Calibra V6 Cliff (TT-01E) | RC-Reflex Start Electric Set | PS-5 Black Polycarbonate 100ml Article number: 300058701 Product: 1:10 RC Opel Calibra V6 Cliff (TT-01E) The Calibra V6 took part in the 1995 German Touring Car Championship (DTM). Run by the Joest Team and driven by JJ.Lehto, the Calibra had a 2.5L V6 engine with 420hp. The Opel Calibra V6 "Cliff" is based on the proven TAMIYA TT-01E chassis with four-wheel drive. A large selection of tuning parts allows the model to be upgraded to a racing machine and is in no way inferior to the original. Required accessories: Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger, paint for polycarbonate body (TAMIYA PS-) 4WD kit model, TT-01E chassis, elect. Speed controller, 540 torque tuned motor, polycarbonate body with add-on parts, gimbal drive, spring struts, independent suspension, tub frame chassis, slick tyres with good grip, instructions. Article number: 500500099 Product: RC-Reflex Start Electric Set The RC-Reflex Start electric set includes all accessories for operating TAMIYA RC kits in 1:10 scale. The compact 3-channel transmitter combines handiness and precision. The set also includes a powerful NiMH battery, a USB charger, a 3-channel receiver, a CS-3 steering servo and 4 x AAA transmitter batteries. 3-channel 2.4 GHz transmitter, 3-channel mini receiver, USB charger, 7.2 V / 2500 mAh drive battery, CS-3 steering servo, 4 x AAA transmitter batteries and instructions. Article number: 300086005 Product: PS-5 Black Polycarbonate 100ml TAMIYA PS = Polycarbonate "Lexan" spray paints are specially developed to paint unpainted kit bodies. Numerous colour shades are available to choose from and allow models to be customised. Each can contains 100ml of high opacity paint which is oil and fuel resistant, this allows use on nitro models. Before use, the body should be degreased and cleaned. Best painting results are achieved when thin layers of paint are sprayed from a distance of approx. 30 cm. The paint should be allowed to dry slightly between spraying so that no "tears" occur. Always follow the painting instructions of models and on the can. Contents: 100 ml spray can with spray head   Warning! Not suitable for children under 14 years.