Sort by:

Top sellers
  • Top sellers
  • New
  • Price ascending
  • Price descending
Filter

Filter
Price
Category
Brand
Brands & licenses
Scale
R/C PC Body Reinf Mesh Tape

Colles de modélisme

R/C PC Body Reinf Mesh Tape

300054792

€10.791 m = €5.40

Article number: 300054792 Product: Body Set R/C PC Reinf Mesh Tape (2m) This polycarbonate reinforcing mesh tape is the perfect solution for hobbyists that are a little more than rough with their bodies. With this tape you can easily reinforce spoilers, fenders and the like with this handy mesh type tape, simply apply clear silicone adhesive to secure the mesh tape in place. Item Contents •2-meter roll of mesh tape (35mm width) x1 •Apply to the inside of the body, on the area you wish to reinforce •Fix into place with separately sold clear silicone adhesive found at local hardware stores

Tamiya Cement w/Brush 20ml

Colles de modélisme

Tamiya Cement w/Brush 20ml

300087012

€3.791 l = €189.50

Article number: 300087012 Product: Tamiya Cement w/Brush 20ml This is liquid type glue. It will work for strengthening the Dangun Racer's body. In the assembly of the body, apply this glue on parts to be fitted together, then fasten the parts with screws. This secure construction brings you a sturdy body ready to battle.

Tamiya Extra Thin Cement w/Brush 40ml

Colles de modélisme

Tamiya Extra Thin Cement w/Brush 40ml

300087038

€6.791 l = €169.75

Article number: 300087038 Product: Tamiya Extra Thin Cement w/Brush 40ml Tamiya EXTRA THIN model cement is used to glue together plastic model kits that use polystyrene plastic. The extra thin formula allows the modeler to glue together small pieces that require pin point accuracy and finesse.   Warning! Not suitable for children under 14 years.

Decal Adhesive (Softener)

Colles de modélisme

Decal Adhesive (Softener)

300087193

€5.891 l = €589.00

Mark Fit 40ml

Colles de modélisme

Mark Fit 40ml

300087102

€4.991 l = €124.75

Article number: 300087102 Product: Mark Fit 40ml Mark Fit is a special solvent designed to soften your model decals which will allow you to apply them onto difficult to apply areas such as bumpy and curved surfaces, providing an improved finish to your scale model. The 40ml bottle contains a convenient brush for easy application. How to Use Apply Mark Fit solvent to area where decal is to be positioned. Place decal onto the area. Slide decal into correct position by a wet finger. Use a soft cloth or cotton swab to remove excess water and any air bubbles. Apply Mark Fit over the decal again, and then use a soft cloth or cotton swab to conform it to the model's surface. Do not touch until decal dries completely. Mark Fit   Warning! Not suitable for children under 14 years.

Tamiya CA Cement Gel Type 3g

Colles de modélisme

Tamiya CA Cement Gel Type 3g

300087091

€4.991 kg = €1,663.33

Article number: 300087091 Product: Tamiya CA Cement Gel Type 3g TAMIYA quality adhesives for all model-making requirements, from craft and plastic glues to instant adhesives.   Warning! Not suitable for children under 14 years.

Tamiya CA Cement Quick Type 2g

Colles de modélisme

Tamiya CA Cement Quick Type 2g

300087062

€5.781 kg = €2,890.00

Article number: 300087062 Product: Tamiya CA Cement Quick Type 2g TAMIYA quality adhesives for all model-making requirements, from craft and plastic glues to instant adhesives.   Warning! Not suitable for children under 14 years.

TAMIYA ABS-Cement 40ml  Bottle

Colles de modélisme

TAMIYA ABS-Cement 40ml Bottle

300087137

€6.791 l = €169.75

  Warning! Not suitable for children under 14 years.

Tamiya Multipurpose Cement Clr

Colles de modélisme

Tamiya Multipurpose Cement Clr

300087188

€12.791 kg = €639.50

  Warning! Not suitable for children under 14 years.

Mark Fit (Super Strong)

Colles de modélisme

Mark Fit (Super Strong)

300087205

€5.991 l = €149.75

Article number: 300087205 Product: Mark Fit (Super Strong) 40ml This Super-Strong Mark Fit is ready to enable perfect application of your decals by softening them so they fit easily to uneven, rounded and matte finished surfaces. It joins standard (Item 87102) and Strong (Item 87135) Mark Fit products on the market, and is for use on thick decals or extremely difficult target surfaces. Set Contents/Information • The bottle comes with a brush applicator on the underside of the cap. • Bottle contents: 40ml. • This is a more powerful formula than other Mark Fit products and may damage some kinds of decal or affect painted surfaces. Recommended for advanced users.

Tamiya CA Cement Micro Nozzles 2.5 (10)

Colles de modélisme

Tamiya CA Cement Micro Nozzles 2.5 (10)

300087212

€4.09

Paint Remover

Colles de modélisme

Paint Remover

300087183

€20.491 l = €81.96

  Warning! Not suitable for children under 14 years.

Tamiya CA Cement Easy Sanding

Colles de modélisme

Tamiya CA Cement Easy Sanding

300087187

€7.191 kg = €2,396.67

Article number: 87187 Product: Tamiya CA Cement Easy Sanding TAMIYA quality adhesives for all model-making requirements, from craft and plastic glues to instant adhesives.   Warning! Not suitable for children under 14 years.

TAMIYA CA Accelerator 10ml Bottle

Colles de modélisme

TAMIYA CA Accelerator 10ml Bottle

300087138

€12.49

  Warning! Not suitable for children under 14 years.

Tamiya Limonene Cement

Colles de modélisme

Tamiya Limonene Cement

300087113

€6.991 l = €174.75

Article number: 300087113 Product: Tamiya Limonene Cement TAMIYA Quality adhesives for all model-making requirements, from craft and plastic glues to instant adhesives. Content: 40 ml   Warning! Not suitable for children under 14 years.

Tamiya accessoires de modélisme Bundle

Colles de modélisme

Tamiya accessoires de modélisme Bundle

BDL-300087003

soon available again

Product bundle consisting of: Tamiya Cement w/Brush 40ml | Mark Fit 40ml | Tamiya Modelers Side Cutter Gray/Plastic | Tamiya Tweezers straight   Article number: 300087102 Product: Mark Fit 40ml Mark Fit is a special solvent designed to soften your model decals which will allow you to apply them onto difficult to apply areas such as bumpy and curved surfaces, providing an improved finish to your scale model. The 40ml bottle contains a convenient brush for easy application. How to Use Apply Mark Fit solvent to area where decal is to be positioned. Place decal onto the area. Slide decal into correct position by a wet finger. Use a soft cloth or cotton swab to remove excess water and any air bubbles. Apply Mark Fit over the decal again, and then use a soft cloth or cotton swab to conform it to the model's surface. Do not touch until decal dries completely. Article number: 300074093 Product: Tamiya Modelers Side Cutter Gray/Plastic This Modeler's Side Cutter is designed for use with plastic parts and is ideal for scale models and Mini 4WD products assembly. The cutter's blades are made with hardened carbon steel and will remain sharp for a long period of time. Article number: 300074004 Product: Tamiya Tweezers straight These quality straight tweezers come in handy when adding small parts to your model and for other jobs requiring precision work. Made from stainless steel with a black cationic finish for long life.   Warning! Not suitable for children under 14 years.

Extra Thin Cement Quick-Set

Colles de modélisme

Extra Thin Cement Quick-Set

300087182

soon available again

  Warning! Not suitable for children under 14 years.

Decal Adhesive 10ml

Colles de modélisme

Decal Adhesive 10ml

300087176

soon available again

  Warning! Not suitable for children under 14 years.

Limonene Cement Extra Thin

Colles de modélisme

Limonene Cement Extra Thin

300087134

soon available again

Article number: 300087134 Product: Limonene Cement Extra Thin ★Extra thin cement is very useful for plastic model assembly as it can be flowed into areas like small gaps between plastic parts and does not leave marks when dried. ★The bottle's cap comes with a convenient brush. ★1 bottle contains 40ml of cement.   Warning! Not suitable for children under 14 years.

Mark Fit (Strong) 40ml

Colles de modélisme

Mark Fit (Strong) 40ml

300087135

soon available again

Article number: 300087135 Product: Mark Fit (Strong) 40ml Mark Fit is a special solvent designed to soften your model decals which will allow you to apply them onto difficult to apply areas such as bumpy and curved surfaces. This "strong" version has a more powerful formula for softening decals compared to the standard version. The Strong version help decals adhere and conform to difficult curved surfaces or matte-painted surfaces. In addition, it could also help speed up the decal application process. The Bottle cap comes with brush applicator and contains 40ml of solvent. Note: May cause damage to painted surface in some cases, particularly surfaces painted with acrylic paints. How to Use Apply Mark Fit solvent to area where decal is to be positioned. Place decal onto the area. Slide decal into correct position by a wet finger. Use a soft cloth or cotton swab to remove excess water and any air bubbles. Apply Mark Fit over the decal again, and then use a soft cloth or cotton swab to conform it to the model's surface. Do not touch until decal dries completely.   Warning! Not suitable for children under 14 years.

R/C PC Body Reinforcing Cement

Colles de modélisme

R/C PC Body Reinforcing Cement

300087190

soon available again

  Warning! Not suitable for children under 14 years.

Tamiya CA Cement & Primer 3g PP/PE/POM

Colles de modélisme

Tamiya CA Cement & Primer 3g PP/PE/POM

300087211

available from April

Tamiya Cement w/Brush 40ml

Colles de modélisme

Tamiya Cement w/Brush 40ml

300087003

soon available again

  Warning! Not suitable for children under 14 years.

23 of 23 Items