Modellbau Antrieb
Modellbau Antrieb gesucht? Hier bist Du genau richtig, entdecke Zahnräder, Motorritzel und alles, was Du brauchst, um Dein RC Modell in Bewegung zu setzen.
Modellbau Antrieb
Modellbau Antrieb gesucht? Hier bist Du genau richtig, entdecke Zahnräder, Motorritzel und alles, was Du brauchst, um Dein RC Modell in Bewegung zu setzen.
Mehr
Achsen & Antriebswellen
ACHSEN SET TL01
3000533019,59 €
The TL01 Stainless Steel Suspension Shaft Set is a hop-up hardware set for TL01 chassis models, built around 8 grooved stainless steel shafts and 16 matching 2 mm E-rings. The shaft layout follows the replacement guide shown for the chassis, with 4 shafts at 3 x 48.5 mm and 4 at 3 x 37 mm, giving the suspension mounting points the specified metal parts for service or upgrade work. The grooved shaft ends are designed to accept the included E-rings, which snap into place to retain each shaft after installation through the relevant suspension points. The guide identifies these shafts as replacements for 3 x 46 mm and 3 x 32 mm screw pins, changing the fixing method from threaded pins to retained shafts with clips. That layout is useful when refreshing a used chassis, replacing missing hardware or preparing a TL01 build with the correct hop-up parts. The set focuses on the pivot hardware itself rather than cosmetic changes, making it a functional addition for maintenance benches and parts boxes. During assembly or repair, the two shaft lengths help match the correct front or rear mounting positions shown in the fitting diagram. The compact metal parts format also makes the set easy to store alongside other chassis spares for routine rebuilds and running upkeep.
Achsen & Antriebswellen
Achsschenkel (1) links lang Stadium
3004451696,99 €
This front left upright is a dedicated spare part for the Stadium Blitzer and is intended to restore a specific suspension or steering connection point in the front corner assembly. The molded piece combines a compact arm shape with a central round mounting hole, creating the defined pivot location needed for the surrounding mechanism to sit correctly. A brass-colored ball stud at one end adds the articulated connection point for the linked assembly. The upright also carries a silver metal shaft with a threaded tip, which provides the fastening point for installation into the matching front section. Reinforced ribs in the molded body support the shape of the part around the mounting area, while the white finish makes the component easy to identify during maintenance or parts sorting. Supplied as 1 piece, it is specified as the front left version rather than a universal side-to-side replacement. This kind of spare part suits focused repairs after wear, damage or a missing original component in the Stadium Blitzer. Kept in a workshop drawer or parts box, it supports routine maintenance and helps return the front assembly to its intended mechanical layout with the correct left-side geometry. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
Achsschenkel (1) rechts lang Stadium
3004452076,99 €
The Stadium Blitzer Right Upright is a dedicated front replacement part for the model named in the data, built to restore the specific right-side mounting point in the front assembly. Its compact form combines a moulded white body with a metal shaft and a ball stud, giving the part the hard connection surfaces needed where linked components pivot and attach. The geometry shown for this upright focuses on mechanical fit rather than decoration. A circular mounting hole, a short threaded tip and the ball joint connection provide the key interfaces for installation into the surrounding front-end hardware. The part is supplied as 1 front right upright, which keeps the replacement focused on the exact side named in the specification. That makes it useful when wear, damage or loss affects one defined point in the assembly instead of a wider section. In workshop use, this kind of spare helps return a model to running condition by replacing the named upright with the same designated component type. It also suits parts storage for existing Stadium Blitzer maintenance, where keeping the correct front right spare on hand can shorten downtime between repair and the next run Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
Achsschenkel (1L+1R) MB10/11 58441/452
31980826218,49 €
This front upright set supplies 2 matching metal parts for MB10/11, with left and right versions shaped as a mirrored pair for front-end replacement work. The silver finish and compact machined form give each piece a clean mechanical look, while the curved arm and pivot section point to a defined mounting role within the assembly. Each upright shows a circular attachment hole at one end and a rounded housing at the other, creating the connection points needed for a controlled mechanical fit. A vertical cylindrical shaft extends from each part and ends in a threaded screw tip, adding a fastening detail that supports installation into the intended front assembly position. One housing appears to carry internal threading, indicating that the two sides are not interchangeable and are made for their specific left or right placement. This set suits repair, maintenance or parts replacement on a compatible MB10/11 model where worn or missing front hardware needs a like-for-like component shape. Kept as workshop spares or fitted during a rebuild, the pair provides the dedicated geometry needed for accurate front-end restoration. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
Achsschenkel (2) lang Lunch Box
30055502811,29 €
This spare part set supplies 2 upright assemblies for the Lunch Box model 58063 and gives repair or rebuild work the matching components for a clean replacement. Each assembly pairs a molded white arm with a polished metal shaft, creating a compact mechanical unit that fits the role shown in the original layout. The arm on each piece has a round pivot opening at one end and 2 smaller linkage holes near the curved tip. That hole pattern supports different linkage mounting positions within the compatible control setup, while the threaded shaft end provides a clear fixing point during installation. The paired format matters here, because both matching pieces are supplied together rather than as a single side only. For maintenance work on a used chassis, that makes it easier to replace worn or damaged parts as a balanced set. The set suits workshop use when a Lunch Box 58063 needs fresh running gear hardware in the upright area or when an older build is being returned to working order. It also fits parts storage for ongoing RC maintenance, where model-specific replacements help keep a compatible vehicle ready for the next rebuild or repair session. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
Alu Radmitnehmer 12mm Sechskant (4)
30005305610,59 €
Art.Nr.: 300053056 Art.bezeichnung: Alu Radmitnehmer 12mm Sechskant (4) Es ist ein Teil, das nützlich ist, um die Leistung und Einstellung von RC-Autos zu verbessern. 4x Radmitnehmer Sechskant Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
C-Teile Aufhängung, Getriebegeh. 58618 Monster Beetle 58633 Blackfoot
31900513013,79 €
C Parts R.Suspen./Gearb. is a dedicated RC spare parts sprue for the 58618 Mt.Beetle, centered on rear suspension and gearbox components. The black molded frame groups the matching pieces in one place, giving repair and replacement work a clear starting point when an original section needs to be renewed. The sprue format keeps the individual parts attached until trimming, which helps with handling and identification during workshop preparation. Visible on the frame are larger housing-style sections, round cover-like pieces, bracket forms and smaller connector details, all molded as technical components rather than generic craft material. This format also helps confirm that the replacement shapes match the intended assembly area before fitting begins. For RC model maintenance, that matters most when gearbox and suspension sections need the correct geometry at their mounting points. Used during a rebuild, after wear, or when a damaged section needs to be exchanged, this spare parts frame supports a direct return to the specified model configuration. It fits naturally into a hobby bench setup focused on servicing an existing 58618 Mt.Beetle rather than starting a new full kit. Batteries are not included. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
CC-01 Antriebsachse kurz Pajero 58132
30413504215,99 €
The CC-01 Universal Joint is a dedicated model accessory for Pajero 58132 and serves as a replacement drivetrain part where a precise rotating connection is needed. Its universal-joint design allows torque to pass between connected parts even when the angle changes, which is important on a chassis layout that moves through steering and suspension travel. Used during maintenance or repair, this component helps bring a worn drivetrain area back to a defined mechanical fit. The clear CC-01 designation keeps the application focused on the matching platform, while the Pajero 58132 reference identifies the intended model directly. That makes part selection more straightforward when servicing an existing build rather than replacing larger assemblies unnecessarily. As a single-purpose spare part, it suits bench work that focuses on keeping the drivetrain operating cleanly and consistently. In a workshop setting, the joint can be fitted during routine overhaul after extended running or when a damaged coupling starts to affect smooth rotation. It also works as a practical stock spare for model owners who maintain a CC-01 Pajero 58132 and want the correct replacement ready for the next service interval. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
CC-01 G-Teile Getriebesatz/Diff.-Sperre
30900542217,29 €
CC-01 G-Parts for 58132 provide a focused spare-parts set for drivetrain service, centered on molded mechanical components used in rotational power transfer. The set brings together black injection-molded gear elements and related mounting parts that suit repair work on an existing compatible model. Visible components include multiple spur gears, bevel gears, a larger gear with an integrated vertical pinion, a round plate with screw holes, and additional small parts carried on a sprue frame. That combination points to gearbox or differential-related functions where meshing teeth, axle positions and cover placement all need to match the original layout. The larger geared part with integrated pinion supports a compact transfer step within the mechanism, while the bevel gear forms indicate angled drive movement inside the assembly. The round plate adds a fitted structural piece rather than loose hardware, helping restore the intended arrangement of the surrounding mechanism. On the bench, this set suits planned maintenance, wear-related replacement, or the completion of a drivetrain rebuild when original molded parts are no longer usable. It also works well as workshop stock for model owners who keep compatible mechanical spares ready for future service on 58132-based running gear. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
CC-02 Stahl Anlenkungs-Set einstellbar
30005492923,99 €
Art.Nr.: 300054929 Art.bezeichnung: CC-02 Stahl Anlenkungs-Set einstellbar - Tuningteil für das TAMIYA CC-02 Chassis - 1x 104 mm Stahl Anlenkungsstange - 1x 53 mm Stahl Anlenkungsstange - Kugelköpfe inklusive - Mit diesem Set kann die Lenkung besser eingestellt werden und läuft präziser. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
DB-01 Kugeln Querlenkerwellen (8)Fl.bes.
30005370916,79 €
Art.Nr.: 300053709 Artikelbezeichnung: DB-01 Kugeln Querlenkerwellen (8)Fl.bes. Die Fluorbeschichtung reduziert die Reibung zwischen Aufhängungskugel und Halterung und ermöglicht eine flüssigere Bewegung der Aufhängung. 8x Kugeln Querlenkerwellen Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
DF-01 Antriebswellen (2) 71mm
30980537013,99 €
This spare part set provides 2 drive shafts for model 58087 and focuses on one clear job: replacing the matching drivetrain components with the correct designated parts. The shafts shown combine a long metal rod with white end connectors and protruding metal pins, giving the assembly the connection points needed for the intended mounting position. As a dedicated replacement set, the value lies in fit and function for the specified model rather than in generic compatibility. The 2-piece format suits repairs where both corresponding shafts are changed together, and it also supports planned maintenance when worn drivetrain parts need renewal. The metal rod section forms the main shaft body, while the molded end pieces create the shaped interfaces required by the assembly. This keeps the repair focused on the exact component group named in the set. On the workbench, these drive shafts suit routine servicing, rebuilds after wear, or the completion of an unfinished model that is missing original running parts. For collectors and builders maintaining model 58087, the set supplies the exact replacement category needed for a clean, model-specific repair. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
DF-02 Metallteile-Beutel A 58328
30940015230,49 €
DF-02 Metal Parts Bag A is a model spare parts set identified in the source data for 58328. The designation points to a defined replacement pack rather than a general accessory, making it a practical choice when an existing build needs the matching hardware group restored or completed. The stated metal construction gives this set a clear material identity, while the DF-02 naming keeps the part reference specific for workshop organisation. As a parts bag, it suits maintenance, repair and replacement tasks on a compatible build already in use. The source data places it in model supplies, which fits its role as a support component for an established model rather than a standalone vehicle or assembly kit. This also helps when sorting spares by platform and bag reference during bench work. On the work surface, a clearly named replacement pack saves time during upkeep because the part group is already narrowed to DF-02 Metal Parts Bag A for 58328. It works well as a stock spare for routine servicing, for completing an older build, or for replacing missing original metal components with the specified bag reference. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
DF-02 Differenzial-Mitneh.(2) Stahl
30005379021,29 €
Art.Nr.: 300053790 Artikelbezeichnung: Abtriebe Kugel-Kardan&Antriebswellen Topfgelenk für Getriebe in Kombination mit Montagegelenkwelle. Erzielen Sie einen reibungslosen Betrieb, indem Sie Antriebsverluste unterdrücken. Zur Verwendung mit DF-02 Montage-Universalwelle (Artikel 53791) oder Montage-Universalwelle (TT-01, TA04) (Artikel 53792). 2x Mitnehmer Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
DF-02 E-Teile Antriebsachsen
3090057569,79 €
The DF-02 E-Parts set provides replacement components for the wheel axle and differential joint area, giving compatible model maintenance a direct route to restoring key drivetrain connections. Black moulded parts are supplied on sprues, with the axle-related and joint-related sections grouped for clear identification before removal and fitting. This spare parts set is designated as E Parts for 58328 and is intended for focused servicing rather than broad replacement across unrelated assemblies. The visible component mix includes cylindrical axle-linked pieces, connector forms and longer structural elements that belong to the same parts tree. Keeping these pieces together on one runner helps confirm part shape and orientation during workshop preparation. The set format also suits repair benches where damaged drivetrain sections need matching replacement geometry from the original parts family. Used during maintenance, rebuilds or parts replacement after wear, the DF-02 E-Parts set supports continued running with the correct component group kept on hand. It fits naturally into a spares collection for model upkeep, especially when the axle and differential connection points need renewed parts to return a chassis to working order. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
DF-02 Kegelrad klein
3054550403,59 €
This bevel pinion gear is a dedicated spare part for model drivetrain service, built to pass rotational force through an angled gear interface inside a transmission assembly. The compact metal component combines a toothed upper edge with a conical body, making it suitable for mechanical layouts where direction changes within the drive line are required. Reinforced rib-like shaping along the gear body adds structural definition to the part itself, while the central mounting opening is formed for installation on a shaft or axle. That layout supports correct positioning within the surrounding mechanism and helps restore clean meshing when an original gear shows wear or damage. Supplied as 1 individual gear, it suits selective replacement work where only the affected transmission element needs to be exchanged. The plain silver-gray finish keeps the mechanical form easy to identify during maintenance and parts sorting. In workshop use, this spare gear fits repair jobs on model assemblies that rely on compact internal power transfer between connected drivetrain parts. It also serves as a practical replacement to keep an existing build in running condition after wear in a heavily used transmission section. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
DF-02 Kugel-Kardanwellen (2)
30005379156,99 €
Art.Nr.: 300053791 Artikelbezeichnung: DF-02 Kugel-Kardanwellen (2) Montierbare und demontierbare Universalwelle. Verschleißärmer und leichtläufiger als die Standard Antriebswellen. Dadurch wird die Lenkpräzision erhöht. Wenn Sie außerdem Verbrauchsteile ersetzen, können Sie sich lange an der hohen Leistung erfreuen. DF-02 Kugel-Kardanwellen, Beinhalt alle Teile für 2 Kardanwellen: 70mm Halbkardanwellen, Radachsen, Kreuzverbinder, Madenschrauben, Innensechskantschlüssel und AW-Fett. Passend zu folgenden Chassis in Verbindung mit: DT-02,DT-03 und DT-03T mit 300053863. DF-02 Chassis mit 300053790 oder 300053663 oder 300053671. TT-02B mit 300054477 oder 300053663 oder 300053671. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
DF-03 Getriebeteile-Beutel (MK)
30940041139,99 €
The DF-03 Gear Parts Bag for 58370 focuses on one of the most important working areas in an RC drivetrain: the differential. This spare parts set brings together the core service components needed when the original assembly shows wear, so the drive system can return to clean, controlled power delivery under load. The set is presented as a dedicated bag for the DF-03 and, based on the included contents, covers the internal differential hardware rather than general chassis maintenance. Visible parts include a large metal gear with shaft, a smaller metal gear, 2 black outdrives, 2 black differential housings or cams, 4 large shim washers, additional small shims and washers, 2 metal pins, 2 groups of ball bearings, 6 white bushings or spacers, 4 coil springs, and a tube marked Ball Diff Grease. That combination supports rebuild work, replacement of worn running parts, and fine adjustment of the differential stack. On the bench, the mix of gears, bearings, shims and grease gives a clear route for servicing a used transmission assembly or refreshing a stored chassis before the next run. As a model-specific spare parts bag for 58370, it also helps keep maintenance organised when a DF-03 build needs the correct drivetrain components close at hand. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
DF-03Ra Kugel-Kardanwellen (2)
30005379235,49 €
Art.Nr.: 300053792 Artikelbezeichnung: DF-03Ra Kugel-Kardanwellen (2) Montierbare und demontierbare Universalwelle. Hohe Präzision reduziert das Gefühl des Abwürgens beim Drehen des Lenkrads und ermöglicht eine sanfte Kurvenfahrt. Wenn Sie außerdem Verbrauchsteile ersetzen, können Sie sich lange an der hohen Leistung erfreuen. 1x Kugel-Kardanwellen- Set (13tlg.) Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
Diff.-Gelenk l+r,vo(58370)
30980805920,99 €
F Diff. Joint L & R for 58370 supplies 2 dedicated spare parts for the front differential area, with one left and one right version matched to the named model reference. The black molded pieces show a technical, component-led form with flanged heads and split forked ends that suit connection points in a mechanical assembly. As model spare parts, these joints are intended for targeted maintenance rather than general upgrading. The paired L and R layout matters where the front drivetrain uses side-specific geometry, allowing the correct part to sit in the correct position instead of forcing a universal substitute. The visible shape of each piece supports that role: the cylindrical body forms the main connection section, while the forked end is made to interface with adjoining moving parts in the assembly. This keeps the focus on fit, alignment and restoring the original mechanical layout of 58370. On the workbench, the set suits planned servicing, replacement of worn front differential components, or completion of an existing build that needs the specified joints. The 2-part format keeps both sides of the front assembly covered in one pack, making it easier to match left and right positions during installation. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
Differenzial-Mitnehmer (2) TNS/XBG
3098042378,99 €
The Gear Box Joint set for 43520 supplies 2 matching replacement parts for a drivetrain connection point where accurate fit matters. The machined metal finish and compact cylindrical form suit technical model maintenance, helping restore a clean mechanical link in the gearbox area when an original joint is worn, damaged or missing. Each joint is shaped as a dedicated spare for use with model number 43520 rather than as a generic workshop component. The 2-piece format provides a matched pair for repair planning and parts storage, which is useful when both sides of a mechanism need the same connection standard. The metal construction supports a precise seating surface at the contact point, which matters in assemblies where connected parts need to meet cleanly. As a small drivetrain component, this set fits naturally into regular service work on running models and mechanical rebuilds. On the workbench, the pair can be kept ready for scheduled maintenance or used to replace a failed connection during a repair session. For model builders who maintain existing vehicles over time, dedicated spare parts like these help keep compatible assemblies operating with the intended hardware. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
DT-02/03 Achsschenkel vorne Links/Rechts
30055505910,19 €
The DT-02/03 Upright L/R is a dedicated RC spare part set for restoring the front end of compatible chassis builds. Supplied as left and right uprights, the set replaces the side-specific mounting pieces that support wheel assembly and connected steering or suspension movement during running. Its value lies in precise fitment for the DT-02 and DT-03 platform family, where a damaged upright can affect alignment and interrupt smooth operation. Replacing the affected parts with the correct upright pair helps bring the chassis back to its intended layout without changing unrelated assemblies. The compact parts format also suits the usual maintenance cycle of hobby-grade RC vehicles, where individual wear points are renewed as needed rather than swapping complete sections. For bench work, the set is easy to sort, store and match to the relevant repair task because the application is clearly defined in the designation. This spare part set fits naturally into routine buggy upkeep after repeated use, contact with track barriers or general wear in the front corner area. It also serves as a practical stock part in a workshop drawer, ready for scheduled maintenance or a direct replacement when a DT-02 or DT-03 chassis needs the correct upright on each side. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
DT-03/02 Getriebe-Beutel Zahnräder
3093354327,19 €
This gear bag for 58340 brings the drivetrain back into service with 4 replacement parts shaped for geared power transfer. The set contains white injection-moulded components shown as 2 large gears, 1 smaller double pinion gear and 1 circular cover plate with 3 mounting holes, giving the gearbox area the core parts needed for a targeted repair. The larger gear with a raised cylindrical hub works alongside the second large toothed gear, while the smaller double pinion links motion between stages of the transmission. That layout points to reduction and transfer inside the gearbox rather than cosmetic trim, so the set is suited to maintenance where worn teeth, missing internals or damaged drive parts interrupt movement. The separate cover plate closes the assembly at the matching mounting points and helps return the parts to their intended position inside the housing. Used during a rebuild, service interval or parts replacement, this set supports focused work on the transmission section of 58340 without replacing unrelated assemblies. It also fits neatly into a spares collection for model maintenance, where keeping the correct gears on hand can shorten downtime between bench work and the next run. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
DT-04 Radachse lang vorne/mitlaufend (2)
3000220956,49 €
DT-04 Freewheel Axles Long is a dedicated RC spare part for compatible Tamiya model assemblies. The long axle format supports accurate replacement where the running gear requires this specific version, and the metal construction matches the technical character expected from a drivetrain hardware component. The visible design combines a threaded section, a smooth cylindrical shaft and a locking element, indicating a part made to seat mechanically in a defined mounting point rather than a general-purpose fastener. That combination matters during maintenance because the thread handles fastening while the shaft section aligns the part in use. The long specification distinguishes it from shorter axle variants and helps maintain the intended geometry of the matching DT-04 setup. As a single-purpose replacement component, it belongs in repair stock for existing builds that need the correct axle pattern rather than an improvised substitute. In workshop use, this kind of spare part supports routine servicing after wear, loss or damage to original hardware. It also fits planned rebuilds where a compatible chassis is being refreshed with the correct replacement parts, keeping the assembly focused on proper fit and function. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
F104/F103 Lenkhebel-Wellen/Federn-Set
3000531194,49 €
The F104/F103 Special King Pin is a dedicated spare part for compatible F104 and F103 chassis, intended for maintenance, repair and ongoing setup work. As a king pin, it belongs to the front suspension area where precise alignment between steering and suspension components matters during rebuilds and replacement work. This part is supplied for the F104/F103 platform rather than as a generic hardware piece, which helps keep servicing focused on the correct chassis family. It suits replacing a worn or damaged king pin during routine maintenance, or keeping a matching spare ready in workshop storage for future repairs. The compact format also fits neatly into parts boxes and bench organisers used for model upkeep, making it easier to separate chassis-specific hardware from general screws and fittings. On the workbench, the part supports clean, direct replacement when a front-end rebuild is needed after running sessions or inspection. It also fits tuning and restoration tasks where the original suspension layout of an F104 or F103 chassis needs the correct replacement component rather than an improvised substitute. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
F104/W/F103 Vorderachse Carbon verst.
3000541539,19 €
This carbon-reinforced front support arm is specified for F104, F104W and F103 chassis applications and serves the front support area where an exact replacement part keeps a model's structure consistent. The dedicated fit makes it a practical choice when an existing arm shows wear, damage or loss during maintenance. Used in the front section of compatible chassis, the part supports orderly repairs and helps keep a build aligned with the original F104/W/F103 layout. The carbon-reinforced construction is the key material detail stated for this component, giving the part its defined specification within the range. Its naming also makes workshop identification more direct when several chassis families and spare parts are stored together. As a model supply rather than a complete kit, it is aimed at repair, upkeep and parts replacement on existing compatible cars. On the bench, this type of spare part fits naturally into rebuild sessions, front-end servicing and pre-run checks on F104, F104W or F103 models. It also works well as a stocked replacement for hobby rooms, pit boxes and parts drawers where the correct chassis-specific component saves time during ongoing maintenance. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
FF-03 Hauptzahnrad 68 Z M0,6 (1)
3000514234,59 €
Art.Nr.: 300051423 Art.bezeichnung: FF-03 Hauptzahnrad 68Z M06 This is the 06 Spur Gear (68T) for FF-03 chassis. 06 Spur Gear (68T) x 1pc. Hauptzahnrad 68Z, Modul 0,6. Passend zu TT-02 Speedgetriebe 300054500. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
GF-01/TR Kugellager-Satz (24+2)
30005492439,99 €
Art.Nr.: 300054924 Art.bezeichnung: GF-01/TR Kugellager-Satz (24+2) Highly efficient, smooth power awaits with the installation of this set of ball bearings that includes just the right number to fully kit out the GF-01 chassis. Set Contents/Information • 1150 Ball Bearings x24 • 850 Ball Bearings x2 • Install in place of kit standard plastic and metal bearings. • Compatible with GF-01 chassis models.
Zahnräder & Motorritzel
Hauptzahnrad 91Z 48dp DB-01/TRF501X
3000513146,99 €
The DB-01/TRF501X Spur Gear 91T 48DP is a dedicated RC spare part for compatible drivetrain setups, combining a 91-tooth count with a 48 pitch tooth profile for precise transmission matching during maintenance or repair. Built for use with the DB01 and TF503 chassis named in the data, it gives the drivetrain a clearly specified replacement component rather than a generic gear. The 91T layout determines the driven gear size within the transmission, while the 48DP format identifies the fine tooth pitch used for correct meshing with the matching pinion. That makes this gear relevant when restoring the original gearing arrangement on a compatible chassis after wear, damage or routine workshop service. As a model supply in the Models & Accessories range, it suits bench work focused on drivetrain upkeep rather than cosmetic changes. The listed designation DB-01/TRF501X also helps place the gear within specific RC platform families. In practical use, this spare part belongs in the workshop alongside other transmission service components for compatible off-road chassis builds. During maintenance sessions, it supports a straightforward parts swap that keeps the drivetrain specification aligned with the stated 91T 48DP format for continued running on the correct platform. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
Kegelrad-Set (BB18/19/20) 58618 Mt.Beet.
3194405105,19 €
This bevelgear set brings the key transmission parts needed for focused drivetrain maintenance on compatible model assemblies. The set contains 5 metal gears: 2 larger bevel gears with central bore openings and 3 smaller pinion-style bevel gears with short shafts. Their angled teeth are made to mesh at intersecting shaft positions, a layout commonly used to redirect rotary motion through a compact gearbox section. The combination of larger hub gears and smaller pinions supports replacement work where worn or damaged gear teeth can affect smooth running. Because bevel gears transfer motion across a change in shaft direction, they are suited to mechanical areas where drive needs to turn through an angle rather than continue in a straight line. The silver-gray metal construction gives each gear a clearly defined tooth profile and a technical finish that matches the functional role of these parts. Compatibility is stated for BB18, BB19 and BB20, with reference to 58618 Mt.Bee. On the workbench, this set suits planned servicing, targeted repair, or keeping essential transmission parts ready for a compatible model. The clearly differentiated gear sizes also help when matching the correct meshing pair during maintenance and reassembly. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
M-03 Kardangelenkwelle (2)
30005359751,99 €
Art.Nr.: 300053597 Art.bezeichnung: M-03 Kardangelenkwelle (2) Eine Gelenkwelle für das M03-Chassis, die montiert und demontiert werden kann. sodass sie für eine lange Zeit verwendet werden können. Ein Teilesatz für zwei Montage-Gelenkwellen. 2x Kardangelenkwelle (15tlg.) Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
M-07C Hauptzahnrad xxZ/Gegenzahnrad
3000516014,59 €
Art.Nr.: 300051601 Artikelbezeichnung: M-07C Hauptzahnrad xxZ/Gegenzahnrad These are the replacement gears to the M-07 Concept gearbox. •M-07 Concept Spur Gear (37T/21T) x1 •M-07 Concept Counter Gear (29T/23T) x1 •Contains enough gears to replace 1 complete gearbox. •Compatible with M-07 Concept chassis cars. 1x Hauptzahnrad, 1x Gegenzahnrad Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
Motorritzel 19Z M0,6 Stahl
3035050495,69 €
This 19T pinion gear is a compact drivetrain part for model applications that use module M0.6 gearing. Its 19 straight teeth mesh with the matching gear stage to pass motor rotation into the transmission, making it a functional choice when a specific tooth count is needed in the drive layout. The dark metal gear body is shaped for shaft mounting, with a central round bore and a side set-screw hole visible on the part. The top surface is marked with 19, which helps distinguish this version from other tooth counts during maintenance or parts sorting. As a small mechanical component, the pinion sits at the point where motor output meets the rest of the drivetrain, so the tooth count directly relates to the gearing combination used in the model. It fits naturally into workshop tasks such as replacing a worn pinion, restoring a compatible drivetrain, or keeping a matching spare ready for service intervals. On the bench, the compact form and visible marking make it straightforward to identify alongside other transmission parts and gearing options. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
Spannachse 3x23mm (4)
3098057804,69 €
This set of 4 turn-buckle shafts in 3x23 mm format adds a precise replacement option for RC model maintenance and setup work. The metal shafts are threaded on both ends and use a compact central section that supports handling during installation, removal and adjustment inside a linkage assembly. Used in steering or similar connection points where exact length matters, turn-buckle shafts allow the assembly to be tuned by changing the effective linkage position rather than replacing the whole mechanism. The 3x23 mm specification is the key fit detail for matching an existing compatible build, and the pack of 4 provides a practical quantity for servicing paired linkage points or keeping matching spares on hand. The dark metallic finish and cleanly cut threads reflect the functional, workshop-focused character of the part. These shafts fit naturally into bench work such as replacing worn connectors, refreshing a running chassis or preparing a model for its next setup session. In a parts box, pit case or hobby drawer, a matched set of 4 helps keep compatible RC assemblies ready when a linkage needs a fast, like-for-like swap. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
TA01/DF-01 Achsschenkel (2) vorne schw.
3004455728,69 €
TA-01/DF-01 Upright (2) is a black RC spare part set for compatible TA-01 and DF-01 chassis builds, supplying 2 mirrored uprights on a single molded sprue for direct replacement work. The paired form supports left and right side installation, making it easier to restore the original mounting layout when an existing part is worn, cracked or missing. Each upright is injection-molded and shaped with cylindrical mounting sections, angled arms and reinforcing ribs that support the part where screws or pins pass through the fixing points. The molded geometry is designed for chassis assemblies that rely on precise alignment between connected components, so replacement with the correct upright helps maintain clean mechanical fit. The central sprue keeps both matching pieces together until installation and helps identify the set as one complete replacement pair. This spare part suits workshop use during routine maintenance, rebuilds after running wear, or parts-box preparation for TA-01 and DF-01 platforms. Kept on hand with other service components, the 2-piece set supports faster repairs when suspension or wheel-mount areas need attention. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
TA01/DF-01 G-Teile Zahnräder
30900532214,99 €
The TA-01/DF-01 G-Parts gear set focuses on the mechanical core of compatible RC model assemblies, with injection-moulded components shaped for drivetrain and gearbox-related service work. Visible in the set are a large spur gear with an integrated central bevel gear, 2 medium cylindrical gears with fine outer teeth, smaller gear-form parts on a sprue, and 2 round disc-shaped pieces with raised pegs and centre holes. These parts support repair and replacement tasks where worn, missing or damaged transmission elements affect the running condition of a TA-01 or DF-01 based build. The different tooth forms, mounting holes and moulded connection points indicate use in geared drive sections rather than body or decorative areas. As unassembled service parts, the set gives builders the correct component shapes needed for maintenance without requiring improvised substitutions. On the workbench, the clearly separated moulded pieces help with checking fit before installation and with comparing old and new parts during a rebuild. This makes the set useful for planned servicing as well as for bringing an older chassis back into operating condition after drivetrain wear or gear damage. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
TA02/FF-01/CC-01 Achssch. (2) vo. Blau
3004452468,69 €
The TA-02/FF-01 Front Upright blue set supplies 2 replacement uprights for compatible front-end assemblies. Each part is formed as a mirrored counterpart, so the left and right sides can be positioned correctly when restoring the steering or suspension layout on a TA-02 or FF-01 chassis. The shape combines a large cylindrical hub section with a smaller upper mounting point and a flat arm with a fastening hole. Reinforcing ribs add structure to the moulded form, and the visible metal insert at the upper mount provides a ready fixing point within the assembly. The blue colour helps separate this pair from other small chassis parts during sorting, servicing and rebuild work. As a dedicated spare part, this set is intended for precise replacement rather than general-purpose adaptation. The 2-piece format suits routine maintenance, repair of worn front components or keeping matching replacements on hand for workshop use. In a build area or pit box, the mirrored pair can be checked against the existing front assembly before fitting, helping keep the chassis layout consistent on both sides. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
TA08 D-Teile Querlenker (2)
30005166913,49 €
TA08 D Parts suspension arms are replacement chassis components for TA08 cars, supplied as 2 parts for maintenance when existing arms are worn. The set focuses on a key suspension area, making it useful for restoring the chassis with matching parts intended for the named platform. The molded parts shown in the set use a mirrored left and right layout, with multiple pivot points and mounting positions formed into each arm. This geometry matters in an RC chassis because the suspension arms connect the wheel assembly to the main structure and guide movement through compression and rebound. Metal-lined pivot holes are visible in the image, adding defined contact points where the parts mount into the suspension system. The black finish keeps the look consistent with typical chassis hardware and makes the parts easy to integrate into an existing TA08 build. These parts suit routine workshop maintenance, rebuilds after heavy running, or a fresh chassis refresh before the next session. In a repair setup, the 2-piece format supports replacing worn arm sections as a matched pair so the suspension layout stays even across the car.
Zahnräder & Motorritzel
TA08 M0.6 Hauptzahnrad 71Z
3000516673,69 €
The TA08 06 Module Spur Gear 71T is a drivetrain spare part for TA08 chassis cars, built to replace a worn gear with the same 06 module format and 71T tooth count. In the transmission, the spur gear works directly with the pinion gear to pass motor power into the driveline, so a fresh gear can restore clean meshing where wear has built up over time. The part shown has a black moulded finish, a large centre hole and multiple circular cut-outs around the hub. Those openings are part of the gear design and sit around the central mounting area while the fine outer teeth carry the load of the gear mesh. Used as routine maintenance, this replacement helps keep the chassis in running condition when the original gear shows visible wear on the teeth. The pack contains 1 TA08 06 Module Spur Gear 71T. It suits workshop upkeep between running sessions, whether the transmission is being refreshed after repeated use or a worn gear is being swapped before the next outing. For TA08 owners who keep spares on hand, this gear covers a core wear point in the drivetrain with the exact compatibility stated for TA08 chassis cars.
Zahnräder & Motorritzel
TA08 Zahnriemen Hinten 101Z
3000516719,19 €
The TA08 Rear Belt 101T is a dedicated spare part for TA08 chassis cars, built to replace the rear transmission belt when wear starts to affect the drive system. Its toothed inner surface is designed to engage with matching pulleys, creating the mechanical link that carries rotational force through the rear section of the chassis. Used as part of routine maintenance, this replacement belt helps preserve the intended drivetrain function of a TA08 setup. The circular flexible belt format allows it to sit correctly around the pulley path, while the 101T specification identifies the exact rear belt version supplied here. The pack contains 1 rear belt, making it a direct service part rather than a multi-piece upgrade set. Because this is a chassis-specific component, compatibility is stated for TA08 chassis cars. In workshop use, a fresh rear belt is fitted when an existing belt has become worn through repeated running. That makes this part a practical choice for keeping a TA08 car ready for further track sessions, tuning work, and regular upkeep of the transmission system.
Zahnräder & Motorritzel
TA08 Zahnriemen Vorne 132Z
30005167012,19 €
The TA08 Front Belt 132T is a dedicated replacement part for compatible TA08 chassis cars, built to restore the front drivetrain with the specified tooth count and matching belt format. Its black toothed loop is shaped to run around the front transmission pulleys, where it transfers motion through the drivetrain and helps return a worn setup to its intended mechanical operation. As a service part, this belt is focused on fit and function rather than cosmetic change. The 132-tooth layout is the defining specification for this component, making it relevant when an existing belt shows wear through repeated running or maintenance inspection. The thin, flexible construction allows the belt to sit correctly within the chassis transmission path, while the toothed inner profile is made to mesh with the matching pulley system used in the TA08 platform. This replacement suits regular workshop upkeep, planned drivetrain refreshes and repair after belt wear has affected running consistency. Kept as a spare for a TA08 chassis car, it supports faster maintenance decisions when the front drive system needs the correct belt specification rather than a universal substitute.
Zahnräder & Motorritzel
TA08/TRF Kegelrad Set f. Öl-Diff.
3000515675,89 €
The TRF420/419 Gear Diff Bevel Set is a drivetrain spare-parts set for selected Tamiya chassis, built around redesigned bevel gears for the newer TRF419 gear differential unit. As replacement internal parts, these gears support accurate restoration of the differential mechanism when the original bevel gears show wear through repeated running and maintenance cycles. The set is described for the TRF419 gear differential unit and also appears in the designation for TRF421X, TRF420 and TA08, making it relevant for several closely related platforms. The redesigned gear shape is specified for the newer differential unit with large oil capacity, a detail that matters when matching internal parts to the correct generation of assembly. The pack contains 2 Gear Differential Unit Bevel Sets in the GV parts category, providing a clear service quantity for workshop stock or scheduled rebuilds. This kind of spare part fits naturally into bench maintenance between race meetings, setup revisions or routine transmission overhauls. Kept alongside other drivetrain consumables, the bevel sets help return a compatible gear differential to its intended internal configuration with the correct replacement parts on hand. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
TB-05 Hauptzahnrad 63 Z M0,6 (1)
3000516093,89 €
Art.Nr.: 300051609 Art.bezeichnung: TB-05 Hauptzahnrad 63 Z M0,6 (1) This is a spare spur gear for the TB-05 chassis. It is the OEM replacement gear found in the original kit. • 63T Spur Gear x1 • Tooth pitch is optimized for use with the most common gear ratios. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
TC01 C-/D-Teile Aufhängung (2)
30005166312,79 €
Art.Nr.: 51663 Art.bezeichnung: TC-01 C-/D-Teile Aufhängung (2) These are the C/D spare parts for the TC-01 chassis. They feature suspension arm, knuckle and rocker arm components among other useful spares. • C/D Parts x2 • Compatible with TC-01 chassis cars.
Achsen & Antriebswellen
TD4 Kugelkardanwellen 73mm (2) Stahl
30002202833,99 €
The TD4 Universal Shaft Set brings a focused drivetrain upgrade or replacement to RC model maintenance, centered on 2 assembled universal shafts and the matching wheel-end hardware. Black-coated metal construction and the articulated joint layout support power transfer where rotating parts need to keep working through steering input and suspension travel. Each shaft is marked 73 and uses a looped eye at one end with a ball end at the other, a mechanical arrangement suited to angled driveline connections rather than a fixed straight link. Alongside the shafts, the set provides 2 axle or outdrive-style components with threaded sections and cross-holes, plus retaining rings, straight pins and 2 short cylindrical couplers. That combination gives the assembly the small locking and joining parts required for a complete drivetrain fitment around the shaft connection points. On the bench, this set suits repair work after wear in the driveline or a planned parts refresh during a chassis rebuild. The compact hardware selection also helps keep RC maintenance organised, with the matching metal pieces grouped for one shaft-related installation rather than drawn from mixed spare parts.
Achsen & Antriebswellen
TRF Doppelkardanwelle 42mm (2)
30004223920,99 €
Art.Nr.: 300042239 Artikelbezeichnung: TRF Doppelkardanwelle 42mm (2) The 44mm Double Cardan Joint Shaft (Item 42216) features two joint sections to minimize rotational vibrations for better feel while installed at the front of any Tamiya touring car. These drive shafts are 2mm shorter so that the overall length becomes equivalent to that of a standard 42mm universal drive shaft, allowing greater suspension setting flexibility.
Achsen & Antriebswellen
TRF Halbkardan 46mm Leicht (2) BB
30005176018,99 €
These TRF 46 mm aluminium half cardan shafts add a focused drivetrain upgrade for compatible RC chassis, combining low weight with a ball bearing mounted layout that helps the axle rotate with less friction. In running, that reduced drag supports steadier power delivery through direction changes, where speed loss at the shaft can affect how cleanly a car carries momentum. The set contains 2 lightweight 46 mm swing axles and is intended as a chassis-specific accessory rather than a universal fit part. The half cardan design suits drivetrain maintenance, replacement work and targeted tuning where the shaft assembly is a key wear point. For TRF421X use, the specification names compatibility with ball bearing set 51762 and differential joints 51764 when the shafts are installed on the TRF421 chassis 42384. That combination gives a clear reference for planning a matching drivetrain setup instead of mixing unspecified parts. On the bench, the defined 46 mm length helps identify the correct shaft format before installation. During track use, the ball bearing mounted construction supports smoother axle movement in repeated corner entries and exits, where friction control matters most in a responsive RC drivetrain. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
TRF Kugellager 1050 Breite 3mm (2)
3000422204,89 €
Art.Nr.: 300042220 Art.bezeichnung: TRF Kugellager 1050 Breite 3mm (2) Ersatzteile für Doppelgelenkwellen. Der Schlüssel zur Aufrechterhaltung einer hohen Leistung für lange Zeit besteht darin, die Lager, die sich schwer drehen lassen, so schnell wie möglich auszutauschen. 2x Kugellager
Achsen & Antriebswellen
TRF L.F. AW 44mm D-Kardan (2)
30004236222,49 €
Art.Nr.: 300042362 Art.bezeichnung: TRF L.F. AW 44mm D-Kardan (2) Improved durability and efficiency await with these 44mm drive shafts, which are designed for use with the swing shaft caps in Item 54921. They also have a fluorine coating applied. Item Contents/Information • 44mm Drive Shafts x2 • Shafts are crafted in durable steel with a fluorine surface coating for minimal friction. • Needle pin sections are now 10.8mm (1mm longer than on previous shafts), to get the most out of swing shaft cap option parts. • Compatible with double cardan joint shafts employing caps from Item 54921.
Zahnräder & Motorritzel
TRF420 Alu Mitnehmer f.Spool-Diff.(2)vo.
30005164719,29 €
Art.Nr.: 300051647 Art.bezeichnung: TRF420 Alu Mitnehmer f.Spool-Diff.(2)vo. These front direct cups, which were designed for the new TRF420 chassis, are now to join the Tamiya Spare Parts line-up. Use them to replace worn parts in a timely manner, to maintain peak drive efficiency. Item Contents/Information • TRF420 Aluminum Front Direct Cups x2 • Swing Shaft Cap Parts x1 • Lightweight and with a hard coating, these direct cups offer superb durability. • Compatible with TRF420 chassis cars or those using Item 51642 TRF420 Front Direct Pulley (37T).
Achsen & Antriebswellen
TRF420 C-Teile Achsschenkel vo (1)
3000516386,39 €
Art.Nr.: 300051638 Art.bezeichnung: TRF420 C-Teile Achsschenkel vo (1) These are the spare steering uprights for the TRF420 race car chassis. They feature the new 2-part front upright designs which utilize separate arm and bearing housing components. You can also use these new uprights on existing Tamiya touring car racing platforms. • TRF420 C Parts x1 • Components are molded in carbon fiber-reinforced plastic for superior rigidity. • Compatible with TRF420, TRF419, TA07 and TB-05 PRO chassis cars.
Achsen & Antriebswellen
TRF420 D-Teile Querlenker (2)
3000516399,99 €
Art.Nr.: 300051639 Art.bezeichnung: TRF420 D-Teile Querlenker (2) These are spare suspension arm parts for the TRF420 racing chassis kit. • TRF420 D Parts x2 • Components are molded in carbon fiber-reinforced plastic for superior rigidity. • The tweaked design uses aluminum inserts for damper attachment. Using different inserts (sold separately) allows adjustment of lever ratio, with three different setups possible. • Rear arms are 3mm offset to the rear, allowing the shorter TRF420 lower deck (while keeping the same wheelbase) and giving increased rear traction. • For use with 3mm diameter shafts (sold in Item 51637). • Compatible with TRF420, TRF419*, TA07* and TB-05 PRO* chassis cars. • Note: *Rear arms have different offset to kit standard parts, and require adjustment of wheelbase using spacers, etc.
Achsen & Antriebswellen
TRF420 E-Teile Achsschenkel hi. (1)
3000516407,59 €
Art.Nr.: 300051640 Art.bezeichnung: TRF420 E-Teile Achsschenkel hi. (1) These are spare rear upright parts for the TRF420 racing car chassis. • TRF420 E Parts x1 • Components are molded in carbon fiber-reinforced plastic for superior rigidity. • Bearing positions are precisely aligned for maximum efficiency. • For use with 3mm diameter shafts (sold in Item 51637). • Compatible with cars using Item 51639 TRF420 D Parts (Suspension Arms).
Zahnräder & Motorritzel
TRF420/419/418 Hauptzahnrad 116Z M0.4
3000515574,49 €
The TRF421/420/419 Spur Gear 116T M0.4 is a dedicated spare part for compatible Tamiya racing chassis, built around a 116-tooth layout and module 0.4 specification. That combination makes it a direct drivetrain replacement when the original gear shows wear, helping restore the intended transmission setup for continued running and regular workshop service. Its role sits at the center of the drivetrain, where tooth count and module need to match the chassis design exactly. The pack contains 1 spur gear, so maintenance can stay focused on the specific part that needs replacement rather than a larger mixed set. The source data also names compatibility with the TRF418 chassis in the long text, while the short designation states TRF421/420/419; this copy therefore follows the current product designation without extending fitment beyond the provided naming. As a model accessory in the Models Supplies category, it suits bench stock for rebuilds, wear replacement and planned servicing. During routine maintenance, a fresh spur gear can be fitted when drivetrain wear becomes visible or when a rebuild calls for the stated 116T M0.4 specification. Kept in a parts case or workshop drawer, it gives compatible chassis a like-for-like replacement ready for the next service interval. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
TRF420/419/TA-07 Dichtung Kegeldf. (4)
3000516485,59 €
The TRF420/419/TA-07 Gasket set brings the shared gear differential seal used in the TRF420, TRF419 and TA07 into the Tamiya spare parts range as a dedicated 4-piece replacement pack. Each gasket is a flat ring with a profiled center cutout and 4 mounting holes, shaped to sit within the differential assembly where accurate positioning matters during service work. Replacing worn gaskets at the right time helps keep the differential unit properly sealed and ready for continued use. The 4 included pieces provide matching replacements for maintenance sessions, rebuilds or parts-box stock, especially on chassis that use the common gear differential design named in the compatibility list. The brown fibre-style gasket material shown in the set is suited to its role as a sealing layer between mechanical parts, while the identical cut pattern across all 4 pieces supports consistent fitment. In workshop use, these gaskets suit routine diff overhauls on compatible touring chassis, whether the goal is refreshing a frequently run car or preparing spare seals before the next rebuild. Kept alongside other service parts, the set gives TRF420, TRF419 and TA07 owners the exact gasket type specified for these gear differential units.
Achsen & Antriebswellen
TRF420/TA-07 37Z Riemenrad Starrachse
30005164213,29 €
Art.Nr.: 300051642 Art.bezeichnung: TRF420/TA-07 37Z Riemenrad Starrachse This is a spare front direct pully component to the TRF420. Use this item to replace damaged or worn parts in your drivetrain. • TRF420 Front Direct Pulley x1 • 0.2mm & 0.3mm Shims x2 each • Front direct pulley and direct holder are an integrated plastic part for a weight savings of 2g compared to separate parts used on previous generation of TRF chassis. • Direct cups are now screw-attached (was 2x9.8mm pins on previous chassis), allowing their replacement without the need to remove the direct pulley component. • Compatible with TRF420 and TA07 chassis cars.
Achsen & Antriebswellen
TRF421 A-Teile (1) Querlenker oben
3000517397,99 €
TRF421 A Parts Upper Arms are model spare parts made for the TRF421 platform, supplying the designated upper arm components for suspension maintenance and chassis rebuild work. The set focuses on one exact assembly group, which makes it easier to replace worn or damaged pieces while keeping the build aligned with the original parts layout. As A Parts, these components belong to a defined section of the TRF421 parts structure rather than a general hardware mix. That clear designation helps when sorting workshop stock, planning a rebuild, or selecting the correct replacement set after track use. Upper arms play a central role in the suspension layout by linking key mounting points and supporting the geometry that guides wheel movement through the chassis travel. Using the correct replacement group helps preserve the intended fit within that section of the model. This set suits bench maintenance, race preparation and post-run servicing when the chassis is stripped for inspection. It also fits well into a spares collection kept ready for fast turnaround between practice sessions, rebuilds and ongoing setup work on the TRF421. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
TRF421 C-Teile (1) Achsschenkel (2)
3000517416,49 €
TRF421 C Parts Uprights provide a direct replacement set for the TRF421 chassis, focusing on the suspension area where accurate part geometry matters during maintenance. The black moulded parts are shaped as dedicated uprights, with the mounting structure needed to restore the original layout when existing components are worn, damaged or missing. Their compact technical form suits bench work that calls for the correct chassis-specific fit rather than a universal workaround. The moulded construction supports clean alignment with the surrounding hardware, and the C parts designation helps identify the set quickly within a larger spares collection. For regular RC maintenance, keeping model-specific replacement parts on hand can shorten downtime after contact on track or wear from repeated running sessions. These uprights fit naturally into workshop routines such as scheduled servicing, partial rebuilds and pre-race checks on the TRF421 platform. They also make a practical addition to a pit box or home parts organiser, where clearly identified replacement sets help keep repairs focused on the exact section of the chassis that needs attention. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
TRF421 D-Teile (1) Querlenker unten
3000517428,99 €
TRF421 D Parts suspension arms are replacement components for a compatible RC model chassis, supplying the left and right arm shapes needed where suspension geometry and mounting accuracy matter. The pair is shown in black molded material with a mirrored layout, so each side follows the intended orientation within the assembly. Each arm uses a lightweight truss pattern with large triangular openings, molded reinforcement ribs and smooth curved edges. That structure concentrates material around the load-bearing sections and the connection areas rather than filling the whole shape solid. Several circular mounting holes are formed directly into each piece, and the visible bushing-style inserts mark the points where compatible hardware is fitted. Hexagonal recess details and molded reference marks add further visual cues when sorting parts during maintenance. These components suit rebuilds, wear replacement or a fresh chassis assembly where the original arm set needs to be renewed. In a workshop setup, the mirrored pair can be matched side by side before installation, helping keep the suspension layout organized and the mounting sequence clear on a compatible TRF421 platform. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
TRF421 Kegelrad-Differenzial Set (1)
30005174539,99 €
The TRF421 Gear Diff Set brings the core parts of a gear differential into one RC maintenance and assembly pack, with a 37T differential case, bevel gears, cross pieces and metal outdrive cups arranged for a focused driveline rebuild. The included oil, gasket plate and sealing parts support the internal mechanism where the gears rotate inside the closed housing. Inside the set are 2 black housing halves, 2 large silver bevel gears, 4 smaller bevel gears, 2 white cross-shaped internal parts, 2 metal shafts or pins, 2 small straight pins, 2 ring bearings, blue O-rings, washers, shims, spacer discs, clips and screws. These parts work together through a clear mechanical sequence: the bevel gears sit inside the case on the cross pieces, the outdrive cups connect at each side, and the housing closes around the assembly with the gasket and screws. The bearings support the rotating sections, while shims and spacers help position the moving parts within the differential body. This set suits workshop use, scheduled maintenance and replacement of worn differential internals on a TRF421 build. On the bench, the laid-out parts make it easy to sort the assembly stages, check each sealing and spacing component, and rebuild the differential with the required hardware close at hand. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
TRF421 Riemenrad 37Z vor. Durchtr.Starr
30005174411,19 €
Hierbei handelt es sich um ein Ersatzriemenrad vorne für das TRF-421 Chassis. Es ermöglicht mit seinen 37 Zähnen bestmöglichen Vortrieb und verfügt über einen starren Durchtrieb. Ersatzriemenrad TRF-421, Starrer Durchtrieb vorne, 37 Zähne, Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
TRF421 Zahnriemen 116Z
30005174610,19 €
The TRF421 Drive Belt 116T is a dedicated replacement part for the drivetrain of the matching TRF421 chassis. Its closed-loop form and evenly spaced inner teeth are made to run around the corresponding pulley path, creating the mechanical link that carries rotation through the transmission during RC use. The 116T specification identifies the belt size for the intended setup and helps maintain the original drive ratio and belt path of the chassis. The black belt material is flexible enough to route through the drivetrain layout while the toothed inner surface is shaped for positive engagement with matching gears or pulleys. This makes the part relevant during routine maintenance, a full rebuild, or the replacement of a worn belt after repeated running sessions. As a single drivetrain component, it is best chosen by the exact designation rather than by appearance alone. In workshop use, the belt fits naturally into service tasks where the transmission is being refreshed or restored to its stated specification. On a race chassis, a correctly matched drive belt helps keep the power system operating through the intended pulley sequence, so the rest of the drivetrain can work as designed. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
TRF421/X Diff.-Geh. 37Zähne
3190076647,79 €
TRF421/X Diff. Case Parts Bag (37T) is a model supplies spare part created for differential-related service work. The designation identifies the component group directly, making it easier to match a replacement to the correct area of a compatible build when worn or missing parts need to be exchanged. The 37T marking provides a concrete specification within the part name, which helps separate this bag from other drivetrain or case components in a workshop stock. As a dedicated replacement rather than a general accessory, it suits planned maintenance, rebuilds and the careful upkeep of running gear assemblies. The bag format also keeps the included parts grouped together instead of loose in a parts box, which supports clearer storage and faster identification during repair sessions. On the bench, this spare part fits naturally into routine model servicing, whether a differential is being refreshed after use or a stored chassis is being brought back into running condition. It also works as a practical reserve component for builders who keep key drivetrain spares ready between race-day checks and workshop maintenance. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
TRF421/X Mutter Hauptzahnrad Blau
3134515277,29 €
The TRF421/X Spur Gear Nut Blue is a dedicated model accessory for the drivetrain area, supplying a specific replacement part for compatible RC builds and maintenance work. Its blue finish gives this small fastening component a clear visual identity on the bench, where quick part recognition matters during rebuilds and servicing. Used at the spur gear mounting point, the nut supports accurate replacement when an original part is worn, misplaced or being swapped during routine upkeep. The compact format makes it easy to sort into organiser trays, hardware boxes or spare-parts drawers alongside other workshop essentials. Because the data identifies this part by its exact TRF421/X designation, it also helps keep parts selection focused on the intended application instead of relying on generic hardware. On a home workbench, in a club pit area or during pre-run checks, a dedicated spare like this keeps drivetrain maintenance moving with less interruption. It fits naturally into regular service routines where small fastening parts are checked, replaced and kept ready for the next rebuild. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
TRF421/X Welle 1,6x9mm Kardanwelle (5)
3198033366,19 €
The TRF421/X Shaft 1.6x9mm is a dedicated model spare part for double cardan assemblies, built around a clearly stated 1.6 x 9 mm shaft size and supplied in a pack of 5. That combination gives maintenance benches and race boxes a direct replacement option when a matching driveline pin is needed, without relying on broad, unspecific hardware choices. Its role is straightforward: this shaft belongs in a double cardan setup, where the correct diameter and length matter for fit within the joint assembly. The 5-piece pack supports repeated servicing across more than one maintenance session and helps keep identical replacements on hand for rebuilds. Because the data identifies this part specifically as a shaft rather than a general accessory, the search value sits in the exact designation and measurement, which makes it easier to match against an existing TRF421/X parts list or a worn component removed during service. On the workbench, this kind of spare suits routine drivetrain upkeep, parts-box organisation and targeted replacement before the next running session. In a workshop stock drawer or trackside tool case, the compact 5-pack keeps the required size ready when a double cardan assembly calls for the same 1.6 x 9 mm specification. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
TRF421X Diff.-Abtrieb Starr BB (2)
30005176320,29 €
The TRF421X Front Direct Cup set is a dedicated RC spare part pack for focused maintenance on the TRF421X platform. With 2 matching front direct cups in one set, it provides the exact replacement format for this specific drivetrain area when worn parts need to be exchanged. As a model supply rather than a full kit, this set is built around precise replacement work. The direct cup design serves the front section named in the part title, which helps keep servicing accurate and avoids replacing unrelated assemblies. The pack format of 2 matching pieces suits symmetrical front-end maintenance and gives a clear fit for rebuild planning, workshop stock or routine parts rotation. Where a drivetrain component has taken wear through repeated running, a dedicated replacement like this keeps the repair centered on the affected section. On the bench, the set fits naturally into regular RC maintenance schedules, from checking drivetrain wear during a rebuild to preparing spares before track use. It also suits hobby storage systems where model-specific replacement parts are kept ready for fast servicing between running sessions. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
TRF421X Gear Diff Set, model accessory set
30005176739,99 €
The TRF421X Gear Diff Set is a model accessory set centered on drivetrain service for compatible hobby builds. Its designation points directly to the differential area, making it a clear choice when a workshop setup calls for a dedicated gear diff replacement or a matching spare kept ready beside the chassis. Within the Models & Accessories range and listed under Models Supplies, this set belongs to the maintenance side of model building rather than the finished vehicle itself. That makes it useful for planned rebuilds, parts sorting, and repair work where the differential assembly needs the correct set under a single name. The wording Gear Diff Set also gives a concrete search anchor for hobbyists looking specifically for differential-related spares instead of general accessories. Batteries are not included. On the bench, the set fits naturally into routine drivetrain work such as refreshing a used build, preparing parts before a rebuild, or keeping a compatible spare ready between track sessions. For collectors and active builders alike, the clear TRF421X designation helps separate this set from broader workshop stock and keeps parts selection focused on the intended assembly area. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
TRF421X Kegeldiff.-Abtrieb BB (2)
30005176417,29 €
TRF421X GearDiff Joints BB is a dedicated model accessory for drivetrain-related maintenance and replacement work. The exact designation points to a specific component set within the TRF421X parts range, making it a focused choice when a compatible build needs the matching GearDiff Joints BB part. This accessory is supplied as a separate component rather than a general-purpose workshop consumable, which matters when service work depends on the correct fit within an existing assembly. The naming indicates use around the gear differential area, so it belongs in repair planning, rebuild preparation, or routine parts replacement where drivetrain wear has to be addressed with the proper matching piece. Because the provided data identifies the part by its exact designation, the clearest buying cue is precise part matching rather than broad category claims. On the bench, this kind of replacement part supports scheduled maintenance, targeted repairs after wear, or preparation of spare components for future service intervals. The compact format also makes it practical to keep alongside other model spares, so a compatible drivetrain can be returned to running condition with the correct designated part when needed. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
TT-01/DF-02 Kugeldifferenzial Set
30005366364,49 €
Art.Nr.: 300053663 Art.bezeichnung: TT-01/DF-02 Kugeldifferenzial Set ★Ball differentials provide a limited slip diff effect, whereby drive is maintained even if one of the driven wheels loses contact with the surface. ★This is an assembly type ball differential, with parts such as gearbox joints included. Compatible Chassis TT-02, TT-02 Type-S*1, TT-02D, TT-01 Type-E, TT-01 Type-ES, TT-01D Type-E, DF-02 & TT-02B*2 Chassis *1: Use with Item 53806 TT-01 Ball Differential Cup Joint for Universal Shaft. *2: When using at the front, insert MB16 (6mm O-ring) into cup joint; when using at the rear, insert MB16 into N1.
Achsen & Antriebswellen
TT-01/TGS Achsschenkel (2) hinten Toe-in
30005367319,99 €
Art.Nr.: 300053673 Art.bezeichnung: TT-01/TGS Achsschenkel (2) hinten Toe-in Diese geformten Kunststoffteile verleihen Ihrem Chassis 2 Grad hintere Vorspur. 2x Achsschenkel Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
TT-02 Diff.-Abtriebe Kardanwellen (2)
30005447712,79 €
Art.Nr.: 300054477 Artikelbezeichnung: TT-02 Diff.-Abtriebe Kardanwellen (2) These are steel gearbox joint shafts which replace the kit standard plastic parts for increased performance and durability. They must be used in conjunction with item 53792 RC Universal Shaft Assembly set. Compatible with the TT-02 chassis when item 53792 RC Universal Shaft Assembly is used. Gearbox joints x2
Zahnräder & Motorritzel
TT-02 G-Teile Getriebe
3000515317,19 €
TT-02 G Parts (Gear) brings the core internal pieces of a differential and gearbox service set into one focused spare-parts pack for compatible RC chassis. The layout shown includes differential housing cups, cross-shaped spider gear shafts, multiple bevel gears, a large spur gear and a small bushing or sleeve, giving a clear base for drivetrain maintenance where worn transmission parts need replacement. Inside the differential, the bevel gears and cross shafts form the mechanism that lets drive pass through the axle while allowing the left and right sides to rotate at different speeds in a turn. The housing cups hold these internal gears in position, while the larger toothed gears connect the differential assembly to the rest of the transmission. This makes the set useful for restoring gear mesh, replacing damaged internal parts or rebuilding a gearbox after heavy running. The black molded finish also makes the individual shapes easy to identify on the bench during sorting and fitting. In workshop use, the set suits routine servicing, targeted repairs and full differential rebuilds on a compatible TT-02 platform. It also works as a practical stock spare for RC owners who keep drivetrain wear parts ready between maintenance sessions.
Achsen & Antriebswellen
TT-02 Kugellagersatz (16)
30005447635,49 €
Artikel Nr.: 300054476 Art.bezeichnung: TT-02 Kugellagersatz (16) Ausgestattet mit Kugellagern ist der erste Schritt in Sachen Tuning. Es reduziert Antriebsverluste, verlängert die Laufzeit und erhöht die Lebensdauer der Lager. Kugellagersatz (16tlg.)
Achsen & Antriebswellen
TT-02 Querlenker-Set oben/einstellbar
30005487426,29 €
Art.Nr.: 300054874 Art.bezeichnung: TT-02 Querlenker-Set oben/einstellbar ★These upper arms allow setting of camber angle between 0 and 2 degrees via adjustment of turnbuckle shaft. ★Use Item 42236 when adjusting. Compatible Chassis TT-02, TT-02RR & TT-02D Chassis *Use with Item 53792 Assembly Universal Shaft (TT-01, TA04). Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
TT-02/D A-Teile Achsschenkel vorne (2)
31900061416,79 €
The TT-02/D A-Parts Front Uprights set is a focused spare-parts pack for maintenance on compatible TT-02/D chassis builds. Supplied as 2 front uprights, it addresses a specific front-end component group and helps restore the intended mounting position in the suspension assembly. The parts are moulded pieces designed for direct use as A-Parts within the TT-02/D layout. That makes this set useful when wear, impact damage or repeated running has affected the original uprights and a full chassis parts replacement is unnecessary. Replacing only the front uprights keeps repair work concentrated on the affected area and supports a more efficient rebuild process. The pack format also provides a matched pair, which is practical when both sides of the front suspension need attention at the same time. In workshop use, this kind of spare set fits routine servicing, damage repair and planned refresh work between running sessions. The clearly defined component scope also makes it easier to keep a compatible chassis in running condition with the exact parts group needed for the front end. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
TT-02B C-Teile Querlenker/Kar.-Halter
31900056315,29 €
TT02B C Parts provide a focused spare parts set for RC model servicing, centered on suspension arms and body mount components for the TT02B platform. The molded pieces arrive attached to sprues, which keeps the shapes together for identification before trimming and fitting at the workbench. The set is built around replacement and maintenance use rather than a complete vehicle build. In addition to the suspension arms and body mount elements named in the designation, the visible molded frame also carries related structural pieces that support chassis repair tasks and parts matching during upkeep. The black finish makes the contours, mounting holes and connection points easy to read while comparing old and new pieces side by side. This helps when checking orientation before installation and when separating the required parts for a specific repair. TT02B C Parts suit routine workshop jobs such as replacing worn running gear pieces, refreshing damaged mounting sections after use, or keeping spare components ready between driving sessions. On a hobby bench, the grouped sprues support a tidy workflow while the dedicated fit for the TT02B keeps the repair process focused on the correct chassis family. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
TT02B N-Teile Antriebswellen m.Radachsen
31911515310,49 €
Art.-Nr.: 319115153 Artikelbezeichnung: DT-03/TT-02B N-Teile Antriebsw./Radachs. Passend zu dem DT-03 Chassis Neo Fighter Buggy, DT-02 Chassis Super Fighter Buggy und TT-02B Chassis Neo Scorcher. N-Teile Gießast Antriebswelle/Rad- achse passend für DT-03 Neo Fighter, DT-02 Super Fighter G, TT02B Neo Scorcher. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
Welle 2 x 9,8 mm (10)
3098057763,99 €
This spare shaft set brings exact replacement dimensions to model maintenance with 10 steel shafts measuring 2 x 9.8 mm. The compact format suits small mechanical assemblies where a worn, bent or missing shaft can affect how connected parts sit and move. The 2 mm diameter and 9.8 mm length give a clear reference for matching an existing part before installation. As a workshop consumable, the set supports repeated servicing across compatible hobby models instead of relying on a single replacement piece. The short shaft format is suited to detail areas where space is limited and clean alignment matters. Keeping identical spares on hand can simplify routine upkeep when several connection points use the same measurement. In a home workshop, club pit area or model bench, this shaft pack fits neatly into regular maintenance supplies for ongoing repair work. It also serves as a practical stock addition when checking assemblies, replacing lost hardware or preparing compatible builds for the next running session. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
XV-02 E-Teile Achsschenkel hinten (2)
3000516997,29 €
Art.Nr.: 300051699 Art.bezeichnung: XV-02 E-Teile Achsschenkel hinten (2) - E-Teile aus TAMIYA XV-02 Chassis Bausatz - Achsschenkel hinten XV-02 E-Teile Achsschenkel hinten (2) Achsschenkel hinten E-Teile aus TAMIYA XV-02 Chassis Bausatz
Zahnräder & Motorritzel
XV-02 Hauptzahnrad 70Z/M06 (1) Bauk.
3000516943,69 €
Art.Nr.: 300051694 Art.bezeichnung: XV-02 Hauptzahnrad 70Z/M06 (1) Bauk. - Passend für das TAMIYA XV-02 Chassis - Ersatzzahnrad 70 Zähne Modul 0.6 XV-02 Hauptzahnrad 70Z/M06 (1) Bauk. passend für das Tamiya XV-02 Chassis, Ersatzzahnrad 70 Zähne Modul 0.6
Achsen & Antriebswellen
XV-02/TRF Verbinder (2) Doppel-Kardan
30004221913,99 €
The TRF Joint Case for D-Cardan is a dedicated spare parts set for model drivetrain maintenance, supplied as 2 matching joint cases. The cylindrical metal pieces are shaped for the specific geometry of a D-Cardan assembly, with drilled side holes and ring grooves near both ends visible on each part. Their compact machined form supports accurate placement at the intended connection point, where the case shape matters for fit and movement within the surrounding mechanical setup. As replacement components rather than general workshop hardware, they are suited to restoring the original layout of a worn or damaged assembly. The 2-piece format also provides the matching pair needed when both sides of the mechanism use the same part. In workshop use, these spare parts fit naturally into routine servicing, rebuilds, or targeted repairs on an existing model. They are especially useful when a drivetrain is being refreshed after wear, or when a D-Cardan system needs the correct case geometry to return a mechanical assembly to proper operating condition. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
XV-02/TT02 37mm Halbwelle (2)
30005170016,19 €
Art.Nr.: 300051700 Art.bezeichnung: XV-02/TT02 37mm Halbwelle (2) - 37mm Halbwellen aus dem TAMIYA XV-02 Chassis Bausatz - Kann bei Verwendung von 54623 und 51444 im TT-02 Chassis eingesetzt werden XV-02/TT02 37mm Halbwelle (2) 37mm Halbwellen aus dem TAMIYA - XV-02 Chassis Bausatz Kann bei Verwendung von 54623 und 51444 im TT-02 Chassis eingesetzt
Achsen & Antriebswellen
Abtrieb Kugeldiff. rechts Gr.C (MB14)
313455252bald wieder verfügbar
This Ball Diff. Joint right MB14 is a dedicated model spare part for compatible assemblies that use the specified Group C version. The named right-side format gives a clear replacement reference when an existing joint is worn, missing or needs to be exchanged during maintenance. The MB14 code identifies the joint type directly, which helps keep parts matching tied to the stated designation instead of relying on visual comparison alone. As a single replacement component, it suits repair tasks where only the affected connection point needs attention rather than a broader rebuild. The Group C note further narrows the intended application within the stated model context. That makes this spare part useful for keeping an existing build in running condition with the exact named joint format. In a workshop setting, small drivetrain replacements like this are often kept on hand for routine upkeep between running sessions or service intervals. The clearly stated right-hand version also helps separate it from mirrored or side-specific hardware when preparing parts for maintenance.
Achsen & Antriebswellen
DF-03 Sturz/Spurstangen einstellbar geh.
300053940bald wieder verfügbar
Art.Nr.: 300053940 Artikelbezeichnung: DF-03 Sturz/Spurstangen einstellbar geh. Harter Spannschlosssatz für das DF-03 Chassis. Das Set enthält vier 3 x 50 mm Spannschlosswellen für die Camber Links und zwei 3 x 46 mm Spannschlosswellen für die Lenkung. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
Differenzial-Mitnehmer (2) Kegeldiff.
309805368bald wieder verfügbar
This spare parts set supplies 2 gear box joints for 58067 and focuses on one specific maintenance task: restoring the connection point within the gearbox assembly with matching replacement components. The silver-colored metal finish and compact machined form give the set the technical character expected of a model drivetrain part. Each piece is shaped for mechanical engagement, with a knurled grip section that supports controlled handling during fitting and a slotted cup-like end designed to connect with the adjoining assembly. One joint is formed with a longer shaft, while the second is shorter, indicating 2 distinct matching parts within the set rather than duplicate loose hardware. That distinction matters during servicing, where the correct shape helps return the gearbox linkage to its intended layout. The set is supplied as a dedicated bag of replacement parts rather than a general-purpose fitting. On the workbench, these joints suit repair after wear, loss or disassembly, and they also support planned parts stocking for an existing 58067 model. For rebuilds, maintenance sessions or drivetrain refreshes, the set provides the named components needed for the specified reference without relying on improvised substitutes.
Zahnräder & Motorritzel
Getriebe Beutel Stadium Blitzer 58106
309335111bald wieder verfügbar
This gear bag for the 58106 Stadium Blitzer brings the key transmission elements together in one replacement set, with a large spur gear, a compound gear and a round mounting plate shaped for drivetrain service. The geared parts transfer rotation through meshing teeth, while the central shaft openings support correct placement on the relevant axle points during repair or rebuild work. The large gear uses a broad toothed outer ring for the main driven stage, while the compound gear combines 2 gear diameters in one part to pass motion onward at a different ratio inside the transmission. The round plate adds 3 upright locating pins and 3 smaller peripheral holes, giving the assembly defined reference points for positioning and fastening. The white moulded finish makes the separate shapes easy to distinguish on the bench when comparing worn parts against the replacements. As a model spare part, this set suits maintenance tasks that focus on restoring clean gear engagement and consistent rotational flow. On a workshop table, the 3 parts can be checked against the existing gearbox assembly before installation. During servicing of a 58106 Stadium Blitzer, the set supports targeted replacement of worn internal transmission components rather than changing unrelated parts. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
Getriebe-Beutel Monster Beetle 58618 und Blackfoot 58633
319335026bald wieder verfügbar
Gear Bag 58618 Mt.Beetle is a dedicated RC spare parts set for drivetrain maintenance on the specified Tamiya model. The set contains 2 moulded gears: a large spur gear with a central mounting hole and 3 triangular spoke cutouts, plus a compound gear that combines a large outer gear with a smaller integrated pinion. This layout supports a like-for-like replacement where the original geared transmission needs fresh parts. The visible tooth form and centre bores make the parts easy to identify during servicing, while the compound construction keeps the paired gear stages in one piece. That matters when a repair calls for the original gearing arrangement rather than a mixed substitute. The cream-coloured finish also helps distinguish these gears from other workshop parts during sorting and installation. As replacement components rather than a general accessory, they are aimed at keeping an existing RC vehicle in running order with the correct matching shapes. On the bench, the set fits naturally into routine maintenance, rebuilds after wear, or a parts box kept for model support. It also suits a targeted repair when inspection shows damaged teeth or a worn transmission gear in the Mt.Beetle assembly. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
Hauptzahnrad 96Z/M04 TB-03/04/05
300054055bald wieder verfügbar
Art.Nr.: 300054055 Art.bezeichnung: TB-03 Hauptzahnrad 96Z Das geräuscharme Stirnradgetriebe mit hohem Wirkungsgrad ermöglicht mehr Einstellmöglichkeiten für das Übersetzungsverhältnis. Hoher Wirkungsgrad, geringe Antriebsverluste, geringe Geräuschentwicklung. 1x Hauptzahnrad Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
K-Teile Lenkhebel vorne 58618 Monster Beetle 58633 Blackfoot
319115434bald wieder verfügbar
K Parts Fr. Steering Arm is a model spare part named for the 58618 Mt.Beetle designation and focused on the front steering area. It provides a direct replacement route when the original steering arm needs to be exchanged, helping return the linkage to its intended mechanical role within the model. The ShortDescription identifies this piece specifically as K Parts Fr. Steering Arm 58618 Mt.Beetle, which gives the part a clear maintenance context instead of leaving it as a generic workshop component. Its role sits in the front steering assembly, where steering input is carried through connected hardware during operation. Keeping the correct spare part on hand can simplify planned maintenance and the replacement of worn steering components. This listing states a spare part rather than a complete vehicle or full kit, so the focus stays on targeted repair of the steering section named in the data. In a model workshop, this kind of replacement piece fits routine service after running sessions or inspection of the front end. It also suits parts storage for builders who keep model-specific spares ready for maintenance tied to the 58618 Mt.Beetle designation. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
M-08C C-Halter 2Grad (2) Vorspur
300051620bald wieder verfügbar
Art.Nr.: 300051620 Art.bezeichnung: M-08C C-Halter 2Grad (2) Vorspur Crashes and bumps can sometimes leave you needing new upright components, and Tamiya has drivers of the new M-08 Concept RWD chassis covered with the release of these spare parts. Item Contents/Information • M-08 Concept C Parts sprues x2 • Sprue contains front* and rear uprights*, hub carriers, and adapters. • Hub carrier parts give a caster angle of 2 degrees. • Compatible with M-07 and M-08 Concept chassis cars. *denotes shared design with M-07 Concept.
Achsen & Antriebswellen
TRF Verbinder-Set D-Kardan (2)
300042221bald wieder verfügbar
Art.Nr.: 300042221 Art.bezeichnung: TRF Verbinder-Set D-Kardan (2) Ersatzteile für Doppelgelenkwellen. Der schnellstmögliche Austausch des Kreuzsterns, der ein Verschleißteil ist, ist der Schlüssel zur Aufrechterhaltung der hohen Leistung für eine lange Zeit. 4x Verbinder
Achsen & Antriebswellen
TT-01R/DF03/TNS/TL01 Radachsen (2)
300050823bald wieder verfügbar
Art.Nr.: 300050823 Art.bezeichnung: TT-01R/DF03/TNS/TL01 Radachsen (2) Metall-Radachsen Länge: 35mm, Passend zu TT01R, DF03, TNS, TL01. Lieferumfang: 2 Stück Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Achsen & Antriebswellen
XV-02/TRF Radachse (2) für Doppel-Kardan
300042218bald wieder verfügbar
The XV-02/TRF Axle Shaft for D-Cardan is a dedicated model accessory for RC vehicle maintenance, supplied as a 2-piece set for the specified drivetrain layout. Each shaft is shaped for the XV-02/TRF platform and the D-Cardan system, giving builders a direct route to replacing worn running gear parts with the correct component type. The close-coupled shaft design points to a mechanical role where accurate fit and clean movement matter inside the drivetrain. The parts shown feature a metal body, a threaded end section, a side hole in the shaft body and a pivoting joint-style end, all of which indicate a component made for mounted, moving connections rather than general hardware use. That makes this set relevant for repair work, scheduled maintenance or keeping a chassis configuration consistent after heavy running sessions. On the bench, a matched pair helps keep left and right side service work aligned when the D-Cardan assembly needs attention. In an RC workshop setup, this kind of specific spare part supports faster parts selection, cleaner rebuild planning and a more exact return to the intended XV-02/TRF specification. Achtung! Nicht für Kinder unter 14 Jahren geeignet.
Zahnräder & Motorritzel
XV-02/TT02 Getriebe-Set 39Z Kegeldiff.
300051695bald wieder verfügbar
Art.Nr.: 300051695 Art.bezeichnung: XV-02/TT02 Getriebe-Set 39Z Kegeldiff. - Passend für das TAMIYA XV-02 und TT-02 Chassis - Ersatz-Kegelzahnrad mit 39 Zähne XV-02/TT02 Getriebe-Set 39Z Kegeldiff. Ersatz-Kegelzahnrad mit 39 Zähne passend für das TAMIYA XV-02 - und TT-02 Chassis
Zahnräder & Motorritzel
XV-02/TT02 Kegelrad-Set 39/40Z Spool.
300051704bald wieder verfügbar
Art.Nr.: 300051704 Art.bezeichnung: XV-02/TT02 Kegelrad-Set 39/40Z Spool. - Kegelzahnrad Set 39 und 40 Zähne für Starrachse - Optionales Zahnrad zum 22047 Starrachsen-Set - Kompatibel zu XV-02 und TT-02 mit 22047 XV-02/TT02 Kegelrad-Set 39/40Z Spool. Kegelzahnrad Set 39 und 40, Zähne für Starrachse, Option. Zahnrad zum 22047 Starrachsen-Set, Kompatibel zu TT-02 mit 22047
Achsen & Antriebswellen
6170DRUCKLAGER EINSTÜCK
300053136im Handel erhältlich
The One-Piece Thrust Bearing 1150 is a compact model part for assemblies that need a bearing in 5 x 11 x 4 mm format. Its one-piece construction provides a clear, specific solution for model maintenance, replacement work and planned parts matching when the mechanism calls for this exact size. The 1150 designation helps identify the bearing during workshop sorting and repair preparation, especially when several small components are handled side by side. As a thrust bearing, it is intended for applications where axial forces need controlled support within a model mechanism. The compact dimensions suit tightly packaged layouts in detailed hobby builds, where each millimetre matters for fit and movement. Supplied as 1 bearing, it works well as a direct replacement, a service spare or a reserved part for future maintenance. On the bench, this bearing fits naturally into routine repair sessions, rebuilds and careful parts organisation. It also supports planned stocking of frequently used model components, keeping a correctly sized bearing ready for the next compatible assembly task.
Achsen & Antriebswellen
B-Teile Querlenker vorne Gr.C
310005370im Handel erhältlich
B Parts Front Suspension Arms are a dedicated spare parts set for model maintenance, centered on the front suspension area where accurate replacement matters for continued chassis use. The named B parts designation gives a clear reference for matching the correct component group to an existing assembly and supports a like-for-like exchange when the original arms need replacement. Within a running model, front suspension arms sit in a key position between the chassis structure and the wheel assembly, so replacing this specific part group helps return the front end to its intended layout. The set is suited to repair work after wear, damage or teardown, and it also fits planned rebuilds where the front section is being refreshed with the correct designated parts. Because the data identifies these as front suspension arms rather than a general hardware pack, the focus stays on one concrete mechanical area instead of unrelated maintenance pieces. This kind of spare parts set fits naturally into a bench setup for ongoing model care, whether a chassis is being checked after use or prepared for the next running session. It also works as a practical stock part for builders who keep designated replacement components on hand for future service.
Achsen & Antriebswellen
Wheel Stopper Left Gr.C MB18 Model Spare Part
313455253im Handel erhältlich
Wheel stopper left Gr.C MB18 is a dedicated model spare part for replacing a specific left-side component in a compatible assembly. The exact Gr.C MB18 designation gives a clear reference point when an existing stopper is worn, missing or needs to be matched during maintenance. Used as a targeted replacement rather than a general hardware substitute, this part helps preserve the intended layout of the original build. The left-side specification matters when a model uses mirrored components, because the correct side keeps the assembly aligned with the original parts arrangement. Its compact format also makes it practical for organised storage in parts drawers, workshop trays or labelled repair boxes, where small replacement components need to stay easy to identify. During servicing, rebuilds or parts sorting, a clearly named spare like Wheel stopper left Gr.C MB18 helps keep repair work focused on the exact section that needs attention. It suits model benches where existing assemblies are maintained over time and individual components are replaced as needed.