5 22

Trier selon:

Meilleures ventes
  • Meilleures ventes
  • Nouveautés
  • Prix croissant
  • Prix décroissant
Filtrer

Filtrer
Prix
Catégorie
Marque
Marques & licences
Échelle
1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)

Échelle 1:35

1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)

€17.99

Article number: 300035020 Product: 1/35 WWII Sdkfz.251/1 Halbk. Hanomag (5) In 1938, the German Army decided to develop an armoured personnel carrier on the basis of the 3-ton half track (HL-KL-9p). Hanomag Hannoversch Machinenbau (AG) in Hannover was ordered to develop the running gear and Bussing-NAG in Berlin was to develop the superstructure to be armoured. Design work was hastened on the model of existing armoured cars and a prototype was completed at the end of 1938. The Germans tested the prototype in the Kumahsdorf Proving Ground and accepted it for mass production. Thus was born the Armoured Personnel Carrier Hanomag Sdkfz 251/1 which, we may safely say, was a synonym for the German mechanized corps that showed activity in all battlefields throughout the war.

Plus
1:35 WWII Ger.7,5cm An.Tank Gun(PAK) (3)

Échelle 1:35

1:35 WWII Ger.7,5cm An.Tank Gun(PAK) (3)

€7.59

Article number: 300035047 Product: 1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3) This is a 1/35 scale plastic model assembly kit depicting the L/46 75mm Pak40 anti-tank gun used by German forces in WWII. ★The imposing form of the long-barrelled gun is captured in style, down to details such as sight and handle. ★Barrel offers elevation and traverse, while the breech also slides and the carriage can be moved as well. ★Comes with three figures, plus accessories such as amom cases, shells and more.

Plus
1:35 WWII PzKpfw. II Ausf.F/G (5) SK.121

Échelle 1:35

1:35 WWII PzKpfw. II Ausf.F/G (5) SK.121

€14.49

Article number: 300035009 Product: 1/35 WWII PzKpfw. II Ausf.F/G (5) SK.121 In the morning of September 1, 1939, the German forces consisting of the 3rd, 4th, 8th, 10th and the 14th Armies invaded Poland all heading for Warsaw, its capital. This was the beginning of the 2nd World War that had shaken the whole world for six years and the Germans made a good show of their war efforts at the start with this violent surprise offensive by massed air forces and mechanized ground forces in close co-ordination, the so-called "Blitzkrieg". It was none other than the Pzkpfw 11 that had played the key role in this Blitzkrieg which started with the invasion of Poland to be followed by break-through of the Maginot-line 7 months later and ended with the surrender of France. In anticipation of the delay in production of the two main strength tanks of the Pzkpfw III and the Pzkpfw IV then under development, the Ordnance Department decided in 1934 to develop a new tank instead to fill the gap. It gave specifications of the proposed new tank to the following three companies - the Mann, the Krupp and the Henschel. The specifications envisioned a tank weighing less than 10 tons and armed with 2 cm and 7.92 mm machine guns, one each. Among the designs of the rivaling three companies presented, the one by the Mann was selected and the Mann in cooperation with the Daimler-Benz developed a first tank of the a1 type in 1935. When 25 tanks of the same type were produced, the tank was officially named, "Panzer Kampfwagen II". After the first 25, another 25 tanks of the a2 type and 50 of the a3 type were produced in succession by 1936. Tanks of these 3 types thus produced were equipped each with a 6-cylinder, 130HP, May-Bach HL37 engine and credited with a maximum speed of 40km/h. However, it was decried that the horse-power was not enough and the engine was replaced with a May-Bach HL-62 one of 140 HP. The frontal armour, too, was reinforced and a new tank

Plus
1:35 WWII Fig.-Set Ger. MG Troops (7)

Échelle 1:35

1:35 WWII Fig.-Set Ger. MG Troops (7)

€7.19

Article number: 300035038 Product: 1:35 Fig.-Set Ger. MG Troops (7) This is a 1/35 scale plastic model assembly kit depicting WWII German soldiers with MG34 and MG42 machine guns. ★Features parts to make three different teams of gunner and loader, plus a commander with binoculars for seven figures in total.

Plus
1:35 Diorama-Set Sand Bags (36+12)

Échelle 1:35

1:35 Diorama-Set Sand Bags (36+12)

€5.49

Plus
1:35 WWII Ger.SdKfz.171 Panther A (2)

Échelle 1:35

1:35 WWII Ger.SdKfz.171 Panther A (2)

€21.99

Article number: 300035065 Product: 1/35 WWII Dt. SdKfz.171 Panther A (2) In the beginning of 1942, in order to fight against the T-34, the German military ordered a new tank from Dymler-Benz and M.A.N. companies with the following specifications: Weight- 35 tons; speed- 60 km/h; armament 75mm long gun and armour, 60mm thick in front hull, 35mm thick in the rear and 100 mm at the front of the gun turret. Lastly, it was specified that the tank be equipped with a Maiback HL210, water-cooled, V-type 12 cylinder engine. In May of the same year, M.A.N.'s model was chosen without waiting for completion of a prototype tank. However, there were 2 important modifications. First, in order to meet the military's demand, considerably more than the original 35 ton weight was needed. Second, the military ordered a change in the thickness of the frontal armour from 60mm to 80mm. Because of these changes, the engine type had to be chanded from HL210 to HL230. Then, in order to accommodate this engine, a much better gear was needed, but mass production began without this last change, which resulted in frequent gear malfunctions and related trouble. This became the Panther's greatest defect. In the same year, Dymler-Benz and Henschel were ordered to produce the Panther. Therefore, production was greatly increased and a total of 6283 Panther Tanks were produced, second only to P2KW-4 in number. The first mass produced Panther type D was not equipped with a machine gun but after the experience of close battle. A 7.92mm MG 34 was added to the Panther's right front hull armament beginning with its type A. The special feature of the Panther was the left and right driving mechanism. This created an interchangeability of movements, using the torsion bar system. By 1944, the Panther was further improved from Type A to Type G with a change in its side shape. The Panther continued its activities against the Allied Forces thr Ger. Panther Med. Tank

Plus
1:35 Bundeswehr Leopard 1A4 (1)

Échelle 1:35

1:35 Bundeswehr Leopard 1A4 (1)

€23.99

Article number: 300035112 Product: 1:35 BW MBT Leopard 1A4 (1) This is a 1/35 scale plastic model assembly kit recreating the Leopard A4 which began production in 1974. ★From the spaced armor to the 105mm gun, the powerful form of the tank is captured in style. ★Notable details include the MG3 machine gun and searchlight. ★Comes with a commander figure to add even more detail to your finished model.

Plus
1:35 Dt. Pz.Kpfw. IV Ausf.G Frühe.Prod.

Échelle 1:35

1:35 Dt. Pz.Kpfw. IV Ausf.G Frühe.Prod.

€56.99

Plus
1:35 Diorama-Set Brick Wall (22)

Échelle 1:35

1:35 Diorama-Set Brick Wall (22)

€5.49

Plus
1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4)

Échelle 1:35

1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4)

€33.99

Article number: 300035195 Product: 1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4) During WWII, German armored divisions effectively used Hanomag half-track armored carriers in transport and support roles. Among the many variations was the Sd.Kfz. 251/1 Ausf.D which first appeared in 1943 and is now faithfully depicted as a plastic assembly model kit. The features of the distinctively styled Ausf.D which includes the open top cabin, seats, and wireless radio have been realistically reproduced in great detail. The rear gate can also be depicted in either open or closed position. Included with the Ausf.D are 4 figures in dynamic poses such as the driver looking back from the driver's seat as well as the commander showing the direction of the enemy. In addition, weapons such as a Panzerfaust and MG42 machine gun are included with the kit for added realism.

Plus
1:35 Ger.Flak 8,8 w/Motorcycle (9)

Échelle 1:35

1:35 Ger.Flak 8,8 w/Motorcycle (9)

€32.99

Article number: 300035017 Product: 1/35 WWII Ger.Flak 8,8 w/Motorcycle (9) This famous weapon is well known for its role in World War II. It did, in fact, have its origins during the first World War, when guns of this calibre were used in an anti aircraft role.

Plus
1:35 WWII SdKfz.181 Tiger I Mid.Prod.(1)

Échelle 1:35

1:35 WWII SdKfz.181 Tiger I Mid.Prod.(1)

€45.99

Article number: 300035194 Product: 1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1) The German Tiger I Tank featured a powerful 88mm gun as well as an excellent armor and was the greatest opponent to Allied forces during WWII. This is a 1/35 scale plastic model of the mid-production variant of which 1,354 units were produced from July 1942 to August 1944. The distinct silhouette and features of the mid-production model including the mechanically-complicated suspension, detailed loader's hatch, and equipment such as a scoop have all been realistically reproduced. The model features link type assembly tracks to enhance scale realism.

Plus
1/35 Ger.Pioneer & Goliath Set

Échelle 1:35

1/35 Ger.Pioneer & Goliath Set

€19.29

Article number: 300035357 Product: 1/35 Ger.Pioneer & Goliath Set This 1/35 scale model recreates the Goliath. It was a diminutive tracked vehicle about 1.5m long that could carry up to 60kg of light explosives and was remotely controlled via 3 cables that spooled out of its rear. Some 7,564 were produced in all, split between 12V battery and gas engine-powered variants. They were largely deployed by assault pioneer (Sturmpionier) units, and were hoped to give the advantage of surprise. They were used on all fronts including German counters to the allied invasions in Normandy.

Plus
1/35 Panther Ausf.D

Échelle 1:35

1/35 Panther Ausf.D

€59.99

Article number: 300035345 Procuct: 1/35 Ger. Panther Ausf.D The latest addition to the 1/35 Military Miniature Series depicts the German Panther, a WWII AFV developed by Germany to combat the mighty Russian T-34. Given the importance of stopping the T-34 as the Russians turned the tide in WWII, the Panther was a priority and this was emphasized by armored warfare guru Heinz Guderian's role in the design process. The Panther packed a powerful L/70 7.5cm gun (rumored to have taken out a T-34 at 3km) and combined it with excellent mobility and a 55km/h top speed. Just as importantly, it made great use of T-34-inspired sloped armor, up to 80mm in places. As things turned out, development of the Panther was rushed as the German situation worsened, and this led to severe reliability problems in engagements such as the Battle of Kursk in July 1943. Despite that, it proved offensively and defensively highly capable. The Ausf.D was the initial variant of the Panther; 842 were manufactured between January and September 1943. About the Model • This is a 1/35 scale plastic model assembly kit. • This completely newly-tooled kit captures the form of the Panther Ausf.D with sloped armor, and long 7.5cm gun. Tamiya designers studied a real Panther in the Netherlands to ensure stunning accuracy. • Ausf.D-specific features such as smoke dischargers and rear panel layout are authentically depicted. • Advanced slide molding techniques ensure that turret details are accurately rendered. • Belt type tracks give an effective finish and make for a smooth assembly process. • Commander torso figure plus full body crew figure included. 3 marking options include Battle of Kursk unit. • Three detail-up parts sets are available to further enhance the realism of your model.

Plus
1:35 Ger. Horch 4x4 Type1A Veh. (1)

Échelle 1:35

1:35 Ger. Horch 4x4 Type1A Veh. (1)

€17.99

Plus
1:35 WWII Brit.Tank Churchill Mk.VII (6)

Échelle 1:35

1:35 WWII Brit.Tank Churchill Mk.VII (6)

€39.99

Article number: 300035210 Product: 1:35 Brit. Tank Churchill Mk.VII (6) This is a 1/35 scale plastic assembly kit model of the British Infantry Tank Mk.IV Churchill Mk.VIII. Introduced at the end of 1943, the tank demonstrated its worth during the Normandy invasion while supporting Allied infantry units. The traditional form of the tank, including the unique suspension system with multiple small road wheels, has been faithfully reproduced. In addition, the kit comes with figures which depict a commander, gunner, driver, and a farmer. Abundant accessories such as a cart and milk cans are also included to create a simple diorama.

Plus
1:35 WWII Diorama-Set Barricade

Échelle 1:35

1:35 WWII Diorama-Set Barricade

€5.49

Article number: 300035027 Product: 1:35 Diorama-Set Tank Barricade This is a 1/35 scale plastic model asembly kit recreating barricades that will add a whole extra level of detail to your diorama scenes. ★Creates six each of wooden and metal barricade depictions.

Plus
1:35 WWII Diorama-Set Ger.Weapo.Inf.(24)

Échelle 1:35

1:35 WWII Diorama-Set Ger.Weapo.Inf.(24)

€5.29

Article number: 300035111 Product: 1:35 Diorama-Set Ger. Weapons Inf.(24) This is a 1/35 scale plastic model assembly kit depicting a whole host of armament typically carried by WWII German infantry. ★Firearms in the set include Luger P08 and Walther P38 pistols, Kar98K and G41 rifles, MP40 submachine guns, MP44 selective fire rifles, Pz.B.39 anti-tank rifles, MG34 and MG42 machine guns, magnetic mines, and even the Panzerfaust. ★Accessories such as tripods, ammo cases and more are also in the set.

Plus
1:35 WWII Fig-Set Ger.Front-Line Sold(5)

Échelle 1:35

1:35 WWII Fig-Set Ger.Front-Line Sold(5)

€11.99

Article number: 300035196 Product: 1:35 Fig-Set Ger. Front-Line Soldiers(5) During WWII, German soldiers belonging to armored divisions wore camouflage smocks and M44 field uniforms. This is a plastic assembly kit of five figures which features a noncommissioned officer and a soldier in charging poses armed with a panzerfaust and a MP44 assault rifle, a soldier shooting an MG42 machine gun from his waist, a soldier throwing a hand grenade, and another noncommissioned officer firing his MP44 from his knees. Weapons and accessory parts such as water bottles and gas mask cases all have a sharp detailed finish. Why not display this set with a German armored vehicle model such as a Sd.Kfz. 251/1?

Plus
1:35 WWII Fig.-Set Ger. Assault Tro. (8)

Échelle 1:35

1:35 WWII Fig.-Set Ger. Assault Tro. (8)

€7.19

Plus
1:35 WWII Fig.-Set US Infant. W-Eur.(8)

Échelle 1:35

1:35 WWII Fig.-Set US Infant. W-Eur.(8)

€7.19

Article number: 300035048 Product: 1:35 Fig.-Set US Infant. W-Europe (8) This is a 1/35 scale plastic model assembly kit depicting U.S. infantry in action in Western Europe during WWII. ★Contains parts for eight figures in total. ★Figures are depicted in 1941 and 1943 issue uniform. ★Comes with a plethora of parts for firearms such as M1 rifle and M1 carbine, as well as plenty of accessories like holsters and packs.

Plus
1:35 WWII US Willys Jeep MB 4x4 (1)

Échelle 1:35

1:35 WWII US Willys Jeep MB 4x4 (1)

€21.49

Article number: 300035219 Product: 1:35 US Willys Jeep MB 4x4 (1) Without a doubt the Jeep Willys MB occupies a significant position in the whole automotive history. The origin of the Jeep vehicle dates back to early 1941, when U.S. Forces ordered the Willys, Ford, and Bantam companies to develop prototypes of a small sized multi-purpose 4-wheel drive vehicle. During the early stage of WW2, Germany had achieved outstanding successes by using motorized troops with their "Blitzkrieg" tactics. It became a pressing need for allied nations to possess tough and reliable vehicles with excellent cross-country ability. In November 1941, the Army, with alterations on the front grille and hood to the Ford design, chose the Willy"s vehicle as the basis for the mass production model. This marked the birth of the Willys MB (Model B) that provided unmatched ability to transport Allied troops during the conflict. The early Willys MB had a welded, slat type front grille. Due to the necessity of increasing production, the Army ordered Ford to join the mass production using the Willys MB"s blueprints. It was designated the GPW, and a simple, pressed steelfront grille was introduced. During WW2, the Willys MB and Ford GPW ran over every battlefield. As a means of transit for soldiers, it played an important role in bringing the Allied victory. It was also used for liason, command, communication and sometimes even as an ambulance for a light firearms carrier. Production reached approximately 640,000 units by August 1945.

Plus
1:35/1:16 WWII Figuren-Rangabzeichen

Échelle 1:35

1:35/1:16 WWII Figuren-Rangabzeichen

€10.49

Article number: 300112625 Product: 1:35/1:16 WWII Figure Insignia Decal-Set Use these easy-to-use German Military Insignia decals to add even more exquisite detail to your WWII German military figures. These are designed with the modeller in mind to save time and stress allowing for a more realistic finish. WW2 Ger.Insignia 1/16 1/35

Plus
1:48 Ger. Nashorn Tank destroyer (1)

Échelle 1:48

1:48 Ger. Nashorn Tank destroyer (1)

€30.99

Plus
New
1:48 Rus. Figure-Set Infantry/Tank Crew

Échelle 1:48

1:48 Rus. Figure-Set Infantry/Tank Crew

€16.29

1/48 Rus. Infantry & Tank Crew

Plus
1/35 German Field Team/Eqpt.

Échelle 1:35

1/35 German Field Team/Eqpt.

€27.99

Article number: 300037023 Product: 1:35 German Field Team/Eqpt.(2) The latest release in the Tamiya-Italeri Series is based upon the Italeri 1/35 Field Work Shop kit. This set has newly-molded parts, plus Tamiya figures, accessories and instruction manual, all packaged in a new Tamiya box! It can be constructed into a diorama by itself, or used in conjunction with products from Tamiya’s huge range of German vehicle model assembly kits to create a highly realistic scene.

Plus
1/35 M10 IIC Achilles

Échelle 1:35

1/35 M10 IIC Achilles

€49.99

Article number: 300035366 Product: 1/35 M10 IIC Achilles Here is the British Achilles tank destroyer, which appears in Tamiya 1/35 scale for the first time! The Achilles was a modification of the M10s which Britain received from the U.S., with the original 3-inch main gun replaced by the fearsome British 17 pounder. The vast majority of M10s were the M10 IIC variant, which was based upon the late-production M10 with distinctive enlarged turret-rear counterweight. Around 1,000 were produced between Spring 1944 and the end of WWII, the Allied forces making good use of it after the Normandy landings, benefiting from the power of the gun which allowed it to tear through Tiger I front armor. About the Model - This is a 1/35 scale plastic model assembly kit. - In-depth study of the real thing has enabled this highly accurate scale depiction of the Achilles. - Features newly-molded parts depicting the upper hull with its sloped armor, late production M10 turret counterweight, and long 17pdr gun. - Interior features excellent detail, including depictions of shell racks and multi-part 17pdr gun breech. - Comes with 3 full body figures – gunner and loader seated in the fighting compartment, and commander seated on the turret edge –   plus a driver torso figure. All are brand new! - Lower hull, suspension, wheel and track parts are carried over from the acclaimed Tamiya 1/35 model of the M10 that served as the Achilles’ base. - New sprocket wheel parts depict late M10 components. - 2 planned marking options depict 93rd Anti-Tank Regiment (Italy, 1944) and 75th Anti-Tank Regiment (NW Europe) vehicles.

Plus
1:35 British MBT Chieftain MK.5 (3)

Échelle 1:35

1:35 British MBT Chieftain MK.5 (3)

€25.99

Plus
1:35 Bundeswehr Leopard 2A6 (3)

Échelle 1:35

1:35 Bundeswehr Leopard 2A6 (3)

€63.99

Article number: 300035271 Product: 1/35 Bundeswehr Leopard 2A6 (3) The latest upgrade to the Leopard 2 is a newly designed 55 caliber 120mm smooth bore main gun. Measuring 1.3m longer than the 44 caliber main gun of its predecessor, the Leopard 2 A5, the new gun of the 2 A6 provides higher projectile velocity for increased range and penetration. The 2 A6 retains improvements made to previous Leopard 2 tanks including wedge shaped spaced armor effective against chemical weapons and improved electric gun control and stabilization system. The use of the 2 A6 continues to spread throughout Europe with the Netherlands, Spain and Greece adopting the 2 A6 as their main battle tank. About the Model 1/35 scale plastic assembly kit. Overall length: 314mm Accurately reproduced long 55 caliber 120mm smoothbore main gun adds to sense of power. 2 newly designed half body figures (commander and loader) included in kit. Goggles for figures, headlights and taillights reproduced using transparent parts. Kit features extra road signs for reproduction of realistic diorama. Includes decals to reproduce up to 4 different types of markings, including NATO versions used in Kosovo.

Plus
1:35 Diorama-Set Allied Vehicle Access.

Échelle 1:35

1:35 Diorama-Set Allied Vehicle Access.

€11.99

Article number: 300035229 Product: 1:35 Diorama-Set Allied Vehicle Access. You will be able to provide your 1/35 scale model with an even greater air of realism once it is fully loaded with accessories from this set. A rich assortment of allied army use equipment such as drum cans, jerry cans, buckets, a variety of canvas goods including bags, and vehicle weight plates are realistically reproduced.

Plus
1:35 Diorama-Set Field Kitchen (4)

Échelle 1:35

1:35 Diorama-Set Field Kitchen (4)

€19.49

Article number: 300035247 Product: 1:35 Diorama-Set Field Kitchen (4) This is a plastic model assembly kit of a field kitchen widely used by the German army during WWII. The typical German field kitchen consisted of a large-sized cooking pot and a coffee heater and was connected to a limber which carried cooking materials, various kinds of containers, and emergency rations; the whole package has been realistically reproduced. The limber and trailer can be attached after assembly. Two each of soldier and cook figures are included with the set. A rich assortment of accessories such as milk cartons, bread, cheese, apples etc provide the model with a realistic finish. Four figures included.

Plus
1:35 Soviet Mainbattletank T-62A (1)

Échelle 1:35

1:35 Soviet Mainbattletank T-62A (1)

€21.99

Article number: 300035108 Product: 1:35 Soviet Mainbattletank T-62A (1) This is a 1/25 scale plastic model assembly kit depicting the T-62A tank. ★From the powerful 115mm smoothbore gune to the sleek turret and compact hull, the form of the tank is captured in style. ★Features realistic depictions of cast surfaces. ★Detailed renderings of searchlight and 12.7mm machine gun are another highlight. ★Comes with metal mesh to recreate engine room grille, and one Soviet tanker figure.

Plus
1:35 WWII Brit. Univer. Carrier Mk.II(5)

Échelle 1:35

1:35 WWII Brit. Univer. Carrier Mk.II(5)

€21.49

Article number: 300035175 Product: 1:35 Brit. Univer. Carrier Mk.II (5) During WWII, the British army used small sized fully tracked weapon carriers famously known as "Bren Gun Carriers." This 1/35 scale plastic assembly kit model reproduces one of those carriers, the Universal Carrier Mk.II which was the largest produced in the carrier series. The open-top compartment has been realistically reproduced with realistic seats and radio equipment. Kit comes with firearms such as a Bren machine gun, two Enfield rifles, and PIAT anti-tank weapon, as well as a variety of accessories including ammunition cases. Furthermore, 3 figures from European front and 2 figures from North African front are also included in kit.

Plus
1:35 WWII Fig-Set Ger.Infant. Winter (5)

Échelle 1:35

1:35 WWII Fig-Set Ger.Infant. Winter (5)

€14.99

Article number: 300035256 Product: 1:35 WWII Fig-Set Ger.Infant. Winter (5) In a crouched position, these soldiers are very cautious of their surroundings while pushing forward following a tank. Such a tense frontline scene can now be displayed with this plastic assembly model set which includes five German soldier figures wearing winter uniforms, cotton-made smocks, and realistically reproduced winter overcoats seen during the middle stages of WWII. The noncommissioned officers are depicted carrying weapons such as an MP40 submachine gun and rifles and standing in lower poses than their field commander who has a Walther P38 and a grenade in each hand. Set includes five figures.

Plus
1:35 WWII Ger. PzKpfw. IV Ausf. D (3)

Échelle 1:35

1:35 WWII Ger. PzKpfw. IV Ausf. D (3)

€21.99

Article number: 300035096 Product: 1:35 Ger. PzKpfw. IV Ausf. D (3) This is a 1/35 scale plastic model assembly kit depicting the Ausf.D variant of the German WWII tank Pz.Kpfw.IV. ★From the short-barrelled 75mm gun to the powerful design, the form of the tank is recreated in style. ★Comes with parts to recreate either early or late production Ausf.D variants. ★Includes three figures depicted in uniform seen during the invasions of Poland and France in the opening years of WWII.

Plus
1:35 WWII Ger.Halftr. w/4-Bar.AA Gun (5)

Échelle 1:35

1:35 WWII Ger.Halftr. w/4-Bar.AA Gun (5)

€32.99

Article number: 300035050 Product: 1:35 Ger. Halftr. w/4-Bar.AA Gun (5) Recognising the excellent tractive force and cross-country ability of half tracks, the German Army Ordnance Bureau decided in 1932 to develop six military half tracks, from a 1-ton to a large 18-ton tractor. Different car makers were ordered to develop one of these. Krauss-Maffeir in Munich took charge of an 8-ton half tracks. Because this firm had given attention and study to half tracks since 1928, they completed a prototype, named KMm7 as early as 1933. It soon developed into the KMm8 and KMm9, and in 1936 the KMm10 was put into production. It was not until the KMm10 was born that the 8-ton half track was officially designated "Medium 8-ton Tractor (Sd.Kfz-7). The last production model, KMm11 was completed in 1938 and put into production immediately. The production of the 8-ton half track totalled about 1,200 in number by the end of World War II. One of these models was the 8-ton half track with 20mm four-barrelled AA machine gun (Sd.kfz 7/1)

Plus
1:35 WWII SdKfz.182 Pz VI Kingtiger (1)

Échelle 1:35

1:35 WWII SdKfz.182 Pz VI Kingtiger (1)

€48.99

Article number: 300035164 Product: 1:35 Ger. SdKfz.182 Pz VI Kingtiger (1) With 150mm of frontal armor and 80mm on its sides, the King Tiger was far from a welcome sight for hostile troops; this was rather exacerbated by the awe-inspiring L/71 88mm main gun. This plastic model captures the production turreted King Tiger in all its glory, with masterful depiction of the hull and its weld lines. The opening turret escape hatch allows admiration of the interior and gun breech, even after completion of the kit. Nylon mesh is included in the kit to recreate engine cover nets. Includes belt-type tracks and a realistic commander figure.

Plus
1:48 Brit. Cromwell Mk.IV

Échelle 1:48

1:48 Brit. Cromwell Mk.IV

€28.99

Plus
1:48 Fig.-Set Ger. Wehrm. Infantry (10)

Échelle 1:48

1:48 Fig.-Set Ger. Wehrm. Infantry (10)

€16.79

Plus
1:48 Rus. Mit. Pz. T-34/85

Échelle 1:48

1:48 Rus. Mit. Pz. T-34/85

€26.99

Article number: 300032599 Product: 1:48 Rus. Mit. Pz. T-34/85 Item Contents/Information • This is a 1/48 scale plastic model assembly kit. Length: 169mm, width: 63mm. • A brand new kit, it does not carry over any parts from the T34/76 model already in this series (Item 32515). • The form of the powerful medium tank is captured in style, with an ergonomic parts breakdown much like the real T34/85. The rough cast turret texture is expertly recreated, and the lower hull is a plastic part. • Features depictions of later production road wheels, and the later single-piece turret hatch design. • Assembly type tracks use single-piece straight sections. • Comes with a commander figure and two marking options for vehicles in the invasion of Germany, 1945.

Plus
1:48 WWII Figure-Set Ger.Infantary (15)

Échelle 1:48

1:48 WWII Figure-Set Ger.Infantary (15)

€16.99

Article number: 300032512 Product: 1:48 WWII Figure-Set Ger.Infantary (15) Tamiya introduces a set of 15 high quality plastic assembly 1/48 scale figures. Models depict 10 early WWII style German infantry in charging and firing poses as well as 5 tank crewmen that make perfect accessories for AFV models. Set includes separate plastic weapons and equipment for added realism. About the Model 1 set includes: Noncommissioned Officer x 3 Rifleman x 2 Machine gunner x 3 Loader x 2 Tank crewman x 5 Separate sprue for weapons and equipment. WWII German Infantry Set

Plus
1/35 Brummbaer Late Production

Échelle 1:35

1/35 Brummbaer Late Production

€56.99

Article number: 300035353 Product: 1/35 Brummbaer Late Production The Brummbär is a 15cm howitzer-toting assault tank (Sturmpanzer). It was built on the reliable and versatile Pz.Kpfw. IV chassis. It was ordered by Hitler himself, and produced in various incarnations from April 1943 to March 1945. The most numerous was the late production variant depicted by this model. It used the Pz.Kpfw. IV Ausf.J chassis and had a simplified boxy fighting compartment with an extrusion on the top-left to house a machine gun. In a losing battle, its dedicated Assault Tank Battalions fought in Hungary and the former Czechoslovakia.

Plus
1/35 Crusader Mk.III

Échelle 1:35

1/35 Crusader Mk.III

€50.99

Article number: 300037025 Product: 1:35 Brit. Crusader Mk.III Med. Tank This is a Tamiya-Italeri Series model kit based upon the Italeri British Cruiser Tank Mk.VI Cusader Mk.III. Like other products in the series, it updates the original Italeri kit it has new and updated parts from the Italian maker, plus Tamiya figures, decals and instruction manual, all packaged in a new Tamiya box! The Crusader was an important tank for British forces in North Africa, and the Mk.III variant was up gunned with a 6-pounder gun and more reliable engine that made it a force to be reckoned with. This effectiveness made it the most produced tank in the Crusader family.

Plus
1/35 Easy Eight Korean War

Échelle 1:35

1/35 Easy Eight Korean War

€53.99

Article number: 300035359 Product: 1:35 US M4A3E8 Easy Eight Korean War This model assembly kit depicts the Korean War variant of the M4A3E8 "Easy Eight" Sherman. This kit variant includes new parts! The Sherman – reliable and available in huge numbers - was a gamechanger for the Allies in WWII, and the Easy Eight a prevalent variant most notable for its horizontal volute spring suspension (HVSS) and smooth ride. The Easy Eight's career did not end with WWII, however, as a number were refurbished and thrown back into action by a largely demobilized U.S. Army in the Korean War from 1950. They faced off against T34/85s operated by the Korean People's Army with great success, and were later often used in a supporting fire role.

Plus
1/35 JGSDF Light Armored Veh.

Échelle 1:35

1/35 JGSDF Light Armored Veh.

€46.99

Article number: 300035368 Product: 1/35 JGSDF Light Armored Veh. The latest kit to join the extensive 1/35 Military Miniature Series is this new kit of the Light Armored Vehicle, which recreates a domestic spec version of the vehicle such as that depicted in 1/48 by Item 32590 (previouslyreleased Item 35275 was an Iraq PKO spec vehicle). The Light Armored Vehicle is an integral part of Japan Ground Self-Defense Force (JGSDF) infantry units, key to the emphasis placed on mobility by recent policy changes. Around 1,900 in total have been provided to the JGSDF and the JASDF air arm. About the Model • This is a 1/35 scale plastic model assembly kit. Overall length: 128mm. • The unique form of the actual vehicle has been accurately replicated. • Features detailed synthetic rubber depictions of combat tires, transparent parts for headlights and tail lights, and a die-cast one-piece chassis for authentic weighty feel. • Assembly options include rooftop hatch in open or closed position, quadruple smoke dischargers (usually seen on command cars), and MINIMI machine gun. • A busy interior has recreations of seat, dashboard and accessories such as fire extinguisher. • Kit comes with seated driver figure depicted in the latest JGSDF body armor. • 3 marking options for vehicles with domestic JGSDF units are included.

Plus
1/35 KV-1A 1941 Early

Échelle 1:35

1/35 KV-1A 1941 Early

€59.99

Article number: 300035372 Product: 1/35 KV-1A 1941 Early The highly extensive 1/35 Military Miniature Series welcomes another Soviet subject. This is an important design in the history of armor, and was developed concurrently with the T-34 medium tank. Armed with a powerful 76.2mm ZIS-5 gun and continually updated to improve its survivability, it served through to the end of WWII. About the Model • This is a 1/35 scale plastic model assembly kit. • An early 1941 model is depicted, the distinctive bulky form captured in style. • This is a completely new design, with no parts brought over from previous kits. • Early 1941 features such as welded turret and early production road wheels are accurately rendered. • Authentically reproduces surface textures such as the rough Soviet steel plate and cast areas, with weld lines also depicted. • Driver and gearbox hatches, plus fender-top stowage cases can be assembled open or closed. • Turret ring is accurately captured without using a complex parts breakdown. • Assembly type tracks feature one-piece straight sections and recreate upper run "sag" in style. • Comes with two marking options and a single commander torso figure.

Plus
1/35 M109A6 Paladin Iraq War

Échelle 1:35

1/35 M109A6 Paladin Iraq War

€59.99

Article number: 300037026 Product: 1/35 M109A6 Paladin Iraq War This model kit recreates the U.S. Self-Propelled Howitzer M109A6 Paladinin in 1/35 scale. The kit itself is from the Tamiya-Italeri series. It further updates the original release from 2012 with more molding improvements, brand new parts, and even photo-etched parts included! Of course, it also includes Tamiya figures, accessories, full instruction manual, and decals, all packaged in a new Tamiya box! About the Paladin Deployed from 1992 onwards, the M109A6 continued a series of self-propelled howitzers that started in 1950. The L/39 155mm gun has a range of 30km, used effectively in supporting fire roles in the Iraq War of 2003.

Plus
1/35 M42 Duster w/3 Figures

Échelle 1:35

1/35 M42 Duster w/3 Figures

€33.99

Article number: 300035161 Product: 1:35 US M42 Duster w:3 Figures The M42 Duster was an anti-aircraft vehicle used in conjunction with tank units, equipped with a pair of 40mm cannons on an open-top turret, and powered by a 500hp engine that let it achieve speeds of up to 70km/h. It was accepted into service with the U.S. Army in 1953 and proved an effective anti- aircraft weapons system. • 1/35 scale plastic model assembly kit. Length: 180mm, width: 93mm. • Gun detail, loader’s seat, rifles and more in the interior. • Three marking options included, offering a choice of U.S., Japan Ground Self Defense Force and former West German Army M42s. • Belt type tracks that can be painted and attached using Tamiya cement. • NEW for this RE-ISSUE: Three figures were originally included in the motorized version of this kit (Item 30027, from 1970). They depict crew in the turret, in the act of locating a target. Updated package and 4-language instruction manual.

Plus
1/35 Marder

Échelle 1:35

1/35 Marder

€37.99

Article number: 300035370 Product: 1:35 Ger. Marder I Tank Destroyer This is the latest subject in the long-running Tamiya 1/35 Military Miniature Series. The Marder I was one of the early German efforts to update a military that – despite crushing early successes against Poland and the Allied early in WWII – was in sore need of mechanization. Based upon the French Lorraine supply tractor, it was one of a number of commandeered vehicles pressed into German service. Around 170 were produced from May 1942, and their 7.5cm Pak40 anti-tank gun was a threat to Allied AFVs in France post-Normandy landings, and also on the Eastern Front and even North Africa. About the Model • This is a 1/35 scale plastic model assembly kit. • Tamiya designers worked up close with a specimen in the Musée de Blindés, Saumur. The result is a highly accurate depiction of the compact chassis and bulging upper hull, complete with rivet and weld line details. • Interior features gun breech detail, sights, racks, radio equipment and more. • Assembly type tracks have single piece straight sections. • Bogies have an ergonomic parts breakdown. • Two figures are pictured looking to the skies, hinting at the breakdown of air control from their Luftwaffe after the Normandy landings. • Comes with three marking options, two from Normandy and one from the Eastern Front.

Plus
1/35 Marder III M Normandy

Échelle 1:35

1/35 Marder III M Normandy

€48.99

Article number: 300035364 Product: 1:35 Ger. Marder III M Normandy About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 149.5mm, width: 61mm. ★The distinctive, compact form of the AFV is captured with aplomb. ★Detailed interior really catches the eye. ★Assembly type tracks feature single piece straight sections. ★12 depictions of shells are included, and can be stowed in the rack. ★Features a photo-etched part to capture the muffler cover. ★Includes four full body figures and one torso, plus two marking options.

Plus
1/35 Pz.Kpfw.IV Ausf.F

Échelle 1:35

1/35 Pz.Kpfw.IV Ausf.F

€53.99

Article number: 300035374 Product: 1:35 Ger. Battle Tank IV F L24/75mm Germany’s Pz.Kpfw.IV was a stalwart of the WWII effort, serving from start to finish of the conflict. Manufacture began in 1936 with the Ausf.A, and went through a number of specifications before what was perhaps the definitive short barrelled variant started production in 1941: the Ausf. F. It had reinforced armor and updated hull designs, as well as an L/24 75mm gun. Around 460 rolled off of the production lines, serving on the Eastern front as Nazi Germany grappled with the Soviet Union, and in North Africa. About the Model • This is a 1/35 scale plastic model assembly kit. • In-depth research at the German Tank Museum in Munster contributed to this highly accurate kit, which features brand new parts across the board (only the lower hull and wheels are existing designs).

Plus
1/35 Wespe Italian Front

Échelle 1:35

1/35 Wespe Italian Front

€42.99

Article number: 300035358 Product: 1:35 Panzerhaubitz Wespe Italien. Front This model faithfully recreates the German Self-Propelled Howitzer Wespe. It is a classic model from within the Tamiya catalogue, but this version includes updated parts and new marking options for vehicles that fought on the Italian front. Originally designed as a stopgap, with a production run of 676, this Pz.Kpfw.II chassis-based howitzer exceeded German expectations. Intended mainly for infantry support, the Pz.Kpfw.II’s moving turret was replaced with a boxy stationary superstructure equipped with the Type 18/2 10.5cm L/28 howitzer. While the crew of 5 were not blessed with overwhelming protection, their vehicle was a mobile threat to Allied forces nonetheless.

Plus
1/48 Panther Ausf.D

Échelle 1:48

1/48 Panther Ausf.D

€32.99

Article number: 300032597 Product: 1/48 Panther Ausf.D This 1/48 scale military miniature model kit recreates the Panther Ausf.D, the very first variant of the highly-rated German tank. Developed partly in answer to the Soviet T-34, the Panther offered a complete performance package, with an imposing L/70 7.5cm gun, sloped armor for superior survivability, and excellent maneuverability. Around 840 Ausf.D Panthers were produced between January and September 1943. • 1/48 scale plastic model assembly kit. Length: 186mm, width: 73mm. • The refined design of the Panther Ausf.D is accurately captured, taking in the sloped armor and 7.5cm gun. • Cast mantlet texture and weld lines are depicted with high detail. • Die-cast hull. • Assembly type tracks feature one-piece straight sections. • Parts are included to recreate Schürzen side armor, and accessories like tool racks, gun cleaning rod case, smoke dischargers and more. • Commander torso figure included, plus two marking options for vehicles in the Battle of Kursk.

Plus
1/48 T-55

Échelle 1:48

1/48 T-55

€27.49

Article number: 300032598 Product: 1:48 Rus. T-55 Battle Tank Here is the latest addition to the ever-growing 1/48 Military Miniature Series, creating the mass-produced masterpiece T-55 medium tank that not only provided a base for later T-62, T-72 and T-80 designs still in use today, it spurred Western rivals on and contributed to the great East-West arms race of the Cold War. Its 100mm gun compared favorably with the West’s 90mm counterpart, and with HEAT rounds could defeat up to 390mm of armor. The T-55 was produced in the USSR, and under license in Czechoslovakia and Poland, and supplied to Soviet countries and clients worldwide – it even faced off against U.S.-designed M48s and M60A1s in the Middle East. About the Model • This is a 1/48 scale plastic model assembly kit. Length: 190mm, width: 69mm. • The low, refined T-55 form with hemispherical turret and 100mm gun is captured artfully in compact 1/48 scale. • Features authentic recreations of weld lines and cast turret surfaces. • The 100mm main gun and anti-aircraft machine gun give a realistic finish. • Assembly type tracks have single piece straight sections. • Comes with a commander torso figure surveying the scene in front, and decals to create a single marking option.

Plus
1:35 Brit. BT. Matilda Mk.III/IV(3)

Échelle 1:35

1:35 Brit. BT. Matilda Mk.III/IV(3)

€52.99

Article number: 300035300 Product: 1:35 Brit. BT. Matilda Mk.III/IV(3) At the beginning of 1930, the British army made the decision to produce tanks for different roles, with production of the A12 "Matilda" beginning in 1936. At that time, the Matilda had the thickest armor at 60mm, came armed with a 2-pounder cannon, and had thick side skirts which protected the "Japanese type" bogies. Powered by two diesel engines, the Matilda had a top speed of 24km/hr which was deemed appropriate as it matched the walking speed of infantry. At the North African front, thanks to its impenetrable armor, the Matilda completely defeated the opposing Italian forces. Because of the strength of their armor, the Germans began to use 88mm guns which were the only weapons that could penetrate the Matilda. The Matilda was used throughout WWII and was also used by Soviet, Australian, and Allied forces under the Lend-Lease Act. •This is a 1/35 assembly kit model of the British Infantry Tank Matilda which saw action atthe North African Front during WWII. •Length: 174mm, Width: 72mm. •The Matilda's mechanical form has been accurately reproduced. •The number of parts required for the assembly of the gun turret, hull, and the complicated suspension has been minimized for ease of assembly. •Tall and short cupolas and two types of antennas are included in the kit. •Assembly and belt type tracks are included. •Full-size commander figure, as well as a loader and driver torso figures are included.(Total 3) •3 kinds of decals for the North African front are included. •The Matilda would look fantastic alongside other 1/35 vehicles from the North African front such as German Armored Car Sd.Kfz.223 (Item 35268), German Kubelwagen Type82 (Item 35238), German Armored Car Sd.Kfz.222 (Item 35286), Italian Medium TankCarro Armato M13/40 (Item 35296).

Plus
1:35 Bundeswehr Flak-Panzer Gepard (1)

Échelle 1:35

1:35 Bundeswehr Flak-Panzer Gepard (1)

€26.49

Article number: 300035099 Product: 1:35 BW Flak-Panzer Gepard (1) This is a 1/35 scale plastic model assembly kit depicting the Gepard, a post-WWII anti-aircraft tank operated by West Germany. ★From the 4km-range 35mm cannons to the radar equipment front and rear, the form of the tank is captured in style. ★Features moving barrel and radar depictions, plus opening turret rear hatches. ★Metal net is included in the kit to recreate engine deck grille details. ★Comes with a commander figure in beret.

Plus
1:35 French Med. Tank SOMUA S35

Échelle 1:35

1:35 French Med. Tank SOMUA S35

€55.99

Article number: 300035344 Product: 1:35 French Med. Tank SOMUA S35 The SOMUA S35 was a French Cavalry tank of the Second World War. It was manufactured from 1936 until 1940 to equip armored divisions of the Cavalry. For its day it was a relatively agile medium-weight tank, superior in armor and armament to both its French and foreign competitors, such as the contemporary versions of the German Panzerkampfwagen III. It was constructed from well-sloped, mainly cast, armor sections, that however made it expensive to produce and time-consuming to maintain. While not given a chance to show its full effectiveness during the Battle of France in 1940, the SOMUA showed up strongly in a number of battles with German forces and indeed was used by German forces after the French defeat and even by the Allies after the liberation of France in 1944. It was among the first French tanks developed for use as a cavalry tank, as opposed to the previous infantry roles the tank was largely restricted to under French military doctrine. A cast metal body with armor up to 56mm thick gave excellent protection from German guns, and offensively it could rely on a powerful 47mm gun that repeatedly tore through German tanks. All in all, some 430 SOMUA S35s were produced. Detailed Plastic Kit of Model Franz. SOMUA S35 Mittl. Panzer in Scale 1:35

Plus
1:35 Ger. SdKfz.222 Light Arm. Vehic.(1)

Échelle 1:35

1:35 Ger. SdKfz.222 Light Arm. Vehic.(1)

€32.99

Article number: 300035270 Product: 1/35 WWII SdKfz.222 Light Arm. Vehicle(1) German Armored Car Sd.Kfz.222 Throughout WWII, Germany carried out an extensive program of armored vehicle development, deploying a vast range of armored vehicles to the front line. Amongst these vehicles, the compact 4WD Sd.Kfz.222 remains one of the most famous and popular. Featuring welded plate armor particular to German vehicles at that time, the Sd.Kfz.222 was fitted with a rotating open top turret protected by grenade deflecting mesh screens. The 222 was equipped with an anti-tank and anti-aircraft 20mm main gun and a 7.92mm machine gun. Featuring a 4WD chassis with fully independent suspension and optional 4-wheel steering, it had a top speed of 90km/h. An exceptional off-road vehicle, the Sd.Kfz.222 was seen on all fronts throughout the middle phases of WWII. Sd.Kfz.222 w/Photo Etched Part

Plus
1:35 Panther G Early Zimmerit Sheet

Échelle 1:35

1:35 Panther G Early Zimmerit Sheet

€13.49

Article number: 300012646 Product: 1:35 Zimmerit Sheet Panther G Early Simulating Zimmerit on military models using putty enhances the model's presence but at the same time it requires advanced skills and is time consuming. Made for the novice to intermediate modeler in mind, these stickers enable reproduction of Zimmerit on Item 35170 German Panther Ausf.G Early Production without the use of putty or more advanced modeling techniques.

Plus
1:35 Sov. Med.MBT T-55 A (1)

Échelle 1:35

1:35 Sov. Med.MBT T-55 A (1)

€47.99

Russian Medium Tank T-55A

Plus
60 de 286 Article