RC chassis
Here you will find a large selection of spare parts and accessories for your RC chassis. Find exactly what you need to optimise your model or bring it back to life.
RC chassis
Here you will find a large selection of spare parts and accessories for your RC chassis. Find exactly what you need to optimise your model or bring it back to life.
More
Body kits
1:10 Audi 90 quattro Racing, body set, WB 251mm
300051751€47.99
This 1:10 body set brings the Audi 90 quattro Racing onto compatible touring car chassis with a clear polycarbonate shell shaped for a crisp racing silhouette and a 251 mm short wheelbase layout. The unpainted finish leaves the exterior open to a full custom paint job, from period-style race colours to a display-focused livery built around the included graphics. Separate red parts add key exterior features such as the side mirrors, rear wing and air ducts, giving the shell more depth than a single-piece body alone. Metal attachment parts are included for fitting these components to the shell. The marking sticker sheet carries the race graphics, while the masking stickers help define window areas during painting, so the finishing process can move from clear shell to detailed bodywork with cleaner edges and sharper contrast. Compatibility covers TT-01, TT-01 Type-E, TT-02 chassis excluding TT-02B and TT-02T, and BT-01 cars in the short 251 mm wheelbase format. On a matching chassis, the shell suits track sessions, shelf display or a fresh rebody for an existing touring car build where the boxy Audi racing shape and separate aero details create a distinct 1980s competition presence.
Body kits
1:10 Audi quattro Rallye A2, RC body set
300051615€47.99
The Audi quattro Rallye A2 body set brings a classic rally silhouette to 1:10 chassis builds with a lightweight 1.0 mm polycarbonate shell shaped for road or rally use. Its 257 mm wheelbase matches the proportions shown in the body design, and the clear shell leaves full freedom for trimming, painting and final livery work. Separate detail parts expand the finish beyond the main shell. Front and rear light cases use metal-plated ABS parts, while the side mirrors, wing and wing caps are molded in white ABS for dedicated paint treatment. The light cases are compatible with separately sold LEDs, while the fog lamps are not. Marking stickers and masking stickers are included, supporting accurate window masking and the placement of the Audi rally graphics shown for the body. TT-01, TT-02 and XV-01 chassis cars are listed as compatible. On the bench, the set supports a full custom body build with trimming, drilled mounting points and paint applied from the inside of the polycarbonate shell. Once mounted, the shape suits road sessions and rally-style setups, especially on chassis adjusted for higher ground clearance. LEDs, if added separately to the compatible light cases, can extend the finished look for display or running sessions.
Body kits
1:10 Audi V8 Touring, RC body set, polycarbonate
300051653€47.99
This 1:10 RC body set brings the 1991 Audi V8 Touring onto compatible touring car chassis with a clear polycarbonate shell that captures the car's broad stance, four-door profile and race-bred presence. Once trimmed, painted and finished, the separate body parts and included graphics turn a chassis into a period touring car replica with a strong DTM look. The shell is supplied as a body parts assembly kit, so the finishing process stays in the builder's hands from cut lines to final livery placement. Polycarbonate keeps the form light while allowing the molded details of the bumpers, roofline, wheel arches and rear wing to come through clearly after paint is applied from the inside. The sticker sheet recreates the 1991 Frank Biela No.45 car, and masking stickers help keep window sections crisp during painting. Compatibility is specified for TT-02 chassis, excluding TT-02B and TT-02T, as well as TB-04, TB-05, TA06 and TA07 cars. Fitment depends on a 257 mm wheelbase and a narrow tread setup, so this shell suits chassis builds already configured to those dimensions. On the bench, that makes it a strong option for restoring a worn body, building a second race livery, or giving an existing touring car chassis a distinctly early-1990s competition look.
Stickers
1:10 BBX Sticker Set, RC decal sheet
311421861€11.79
The 1:10 BBX Sticker Set is a dedicated RC decal sheet for the BBX buggy with BB-01 chassis styling, built to give the body shell its full retro off-road racing identity. Large multicolor stripes, bold BBX graphics and black-on-white 45 number plates shape the main visual theme, turning a plain shell into a race-marked finish with period-inspired character. Across the sheet, sponsor markings such as BRITE LITE, PRECIPICE Racing, RUFFSHOD Racing, JOKER CUSTOMS, TVA products, RPM and FORWARD PROGRESSIVE AUTOMOTIVE add the smaller touches that complete the livery. Placement-specific shapes follow the contours of side pods, nose and upper body sections, while duplicate and mirrored pieces support matching decoration on left and right sides. Additional labels including BB-01 CHASSIS, GR FUEL INJECTION, ON OFF and EP extend the detailing into smaller technical areas of the build. Applied during the finishing stage, the decals help define the buggy's stance on a shelf, at a club meet or on the track. The mix of large graphics and fine sponsor text supports both a bold first impression and closer inspection, making the shell look fully dressed rather than only painted. Warning! Not suitable for children under 14 years.
Body kits
1:10 Castrol Honda Civic VTi, RC body set
300051421€46.49
The Castrol Honda Civic VTi RC body set brings touring car shape and period racing graphics into a re-release shell made for 1:10 on-road builds. The clear polycarbonate body gives full control over trimming, internal paintwork and final livery placement, so the finished car can carry the low, compact stance of the original hatchback racer on the chassis underneath. This set includes the body shell, side mirrors, a sticker sheet and window masks. The shell is designed around a 257 mm wheelbase and is described as a fit for the FF-03 chassis, while the stated compatibility list also names FF-04 EVO, FF-03 PRO, TT-02RR, TT-02D, TT-02 TYPE-SR, TT-02 TYPE-S, TT-02, TT-01D TYPE-E and TT-01 TYPE-E chassis. Mounting preparation involves trimming the shell and making body mount and antenna holes where needed. The separate mirror parts secure from inside the body, adding a more complete touring car silhouette once painted and installed. On the bench, the clear shell supports a step-by-step finishing process with masking, paint separation and decal placement all working together. In a completed 1:10 chassis build, the Castrol Honda Civic VTi shape gives club-style on-road cars a recognisable 1990s saloon racing look whether the focus is running sessions or shelf display. Warning! Not suitable for children under 14 years.
Body kits
1:10 Celica GT-Four ST165, body set, WB257mm
300051708€38.99
This 1:10 body set brings the Toyota Celica GT-Four ST165 into touring car form with a clear polycarbonate shell shaped around the coupe's low nose, defined fenders and rear spoiler. The 1.0 mm thickness keeps the shell light while giving the painted body a crisp base for motorsport graphics and window framing. The set contains the clear bodyshell, marking stickers, masking stickers and metal attachment parts. The masking sheet helps cover selected areas during painting, while the marking sheet adds the race-inspired Celica graphics shown by the body design. Molded details for the grille, windows, wheel arches and side sections give the shell more visual depth once trimmed, painted and mounted. The body is intended for 1:10 touring car use and matches chassis with a 257 mm wheelbase. Compatibility is specified for TT-01 Type-E and TT-02 chassis cars, excluding TT-02B, TT-02T and TT-02FT. A narrow rear tread setup is required, so this shell suits builds configured around that fitment. On the bench, the clear finish leaves full control over color layout and livery placement; on the chassis, the ST165 profile gives the model a classic rally-era presence.
Stickers
1:10 Ford Escort Custom, sticker set, masking decals
319490028€21.49
This 1:10 sticker set for the Ford Escort Custom 58691 brings the final visual layer to a painted RC bodyshell, combining printed exterior graphics with dedicated masking pieces for the window areas. The main decal sheet carries Ford logos, Motorsport script, ESCORT markings, grille texture, lamp graphics, vents, trim outlines and plate details, giving the shell the specific identity shown for this version. The masking sheet is cut for the front windshield, rear window, and left and right front and rear side windows. These pieces are applied on the inside of the clear bodyshell before painting, so the transparent sections stay unpainted while the body colour is sprayed around them. The sheet also includes a center-strip layout for larger masks, which helps place each section with better alignment during body preparation. Alongside the graphics and masks, the set also provides a smaller sheet with chassis-area labels such as ON and OFF markings plus battery and caution labels. On the bench, the set supports two key finishing stages: masking before paint and detailing after paint. It suits replacement work for a worn shell as well as a fresh build that needs the correct printed markings for the 1998 Ford Escort Custom 58691 body.
Body kits
1:10 Lancia Delta HF Integrale, RC body set
300051401€59.99
This 1:10 RC body set brings the Lancia Delta HF Integrale into a clear polycarbonate shell shaped for a sharp, competition-style silhouette. The transparent body gives full control over the finish, so the shell can be trimmed, painted from the inside and detailed to match the car's distinctive rally look. The set comes with a sticker sheet, masking seals and separately reproduced detail parts, giving the shell more than a single-piece appearance once completed. Metal plated H parts recreate the front grille, while J parts provide the spoiler and mirror components in separate pieces. The body is designed for a 257 mm wheelbase and can be used with TT-02, TT-02D, TT-02RR, TT-01 TYPE-E, TT-01D TYPE-E and XV-02PRO chassis. On XV-02PRO, the antenna hole position is changed to suit the chassis layout. For TT-01 series use, short wheelbase versions are excluded, and chassis with rear wide tread need conversion to narrow tread. In the workshop, the shell supports a classic RC finishing routine of cutting, drilling, masking and paint application before the graphics are added. Once mounted, the separate grille and spoiler details help the body stand out on rally-style builds, whether the focus is shelf presentation, club running or a period-inspired chassis project. Warning! Not suitable for children under 14 years.
Body kits
1:10 Lotus Europa Special, RC body kit
300051672€41.99
This 1:10 RC body parts assembly kit brings the Lotus Europa Special onto compatible M-chassis cars with a sharply profiled coupe shape and a lightweight polycarbonate shell. The low roofline, long rear section and compact proportions give the finished build a distinct road-car silhouette that stands out on the bench and on the track. The bodyshell arrives clear for trimming, painting and detailing, so the exterior finish can be built step by step around the chosen color scheme. Separate ABS resin parts add dimension to key areas of the car, with side mirrors, light cases and a rear wing supplied as individual components rather than molded into the shell surface. Marking stickers provide the model-specific exterior graphics, while masking stickers support cleaner paint separation around window areas and other defined sections. The shell is intended for M-06 and M-08 chassis cars in the 225 mm medium wheelbase format, which makes the fit target clear when planning a body change or a fresh build. On a workbench, the clear shell, separate detail parts and sticker sheets create a focused finishing project with visible progress at each stage. Once mounted on a compatible chassis, the Lotus Europa Special shape gives club running, shelf display and body customization sessions a classic sports-car look with crisp scale character.
Body kits
1:10 Mazda MX-5, body set, polycarbonate shell
300051583€36.99
This 1:10 body set brings the 2015 Mazda MX-5 into RC form with a clear polycarbonate shell shaped around the compact roadster's low bonnet, short rear deck and crisp lamp outlines. The 1 mm material gives the shell the flexibility expected for RC use while leaving the surface ready for custom paint and decal work. The set is supplied as a body kit with masking seals for the windows, a sticker sheet and separate side mirror parts. Markings cover Japan, U.S. and rest-of-the-world versions, so the finished car can follow different regional MX-5 and Roadster identities shown in the set. The shell is designed for a 225 mm wheelbase and measures 378 mm long by 169 mm wide, which places it squarely in the compact M-chassis format. Trimming and body-post hole preparation are part of the build, and the clear shell format leaves full control over colour choice, window tint and exterior detailing. Mounted on a compatible chassis, the finished body gives club running, shelf display or a fresh rebody project the look of a modern lightweight sports car. It also suits builders refreshing an existing M-platform car with a new shell that combines licensed Mazda styling, detailed mirrors and region-specific finishing options. Warning! Not suitable for children under 14 years.
Stickers
1:10 Mercedes-Benz 190E EVOII Sticker Set
319495893€25.49
This sticker set brings the Mercedes-Benz 190E 2.5-16 EVOII race look onto a 1:10 bodyshell with the Diebels-Alt Team Zakspeed livery, number 18 markings and a full spread of sponsor graphics. Large body decals in mint green, yellow, black, white, red and gray shape the car's period touring-car appearance, while smaller emblem and trim elements help complete the surface detail across the shell. The sheet also carries realistic finishing touches beyond the main livery. Headlight graphics, tail light decals, grille details and thin trim lines define front, rear and side sections that would be difficult to reproduce with paint alone. Driver names, Mercedes-Benz stars and switch labels add smaller reference points that sharpen the scale impression when the body is viewed up close. Alongside the decal sheet, the set includes pre-cut masking seals for the window areas. These masks are marked A to H and are placed on the inside before painting so the transparent sections stay cleanly separated from the body colour. On the bench, the combination of body graphics and window masks supports a more controlled finishing process for a detailed RC car shell. Once applied, the livery reads clearly from a distance, while the finer markings reward closer inspection on a shelf, in a pit-style display or during running sessions with a completed 1:10 Mercedes-Benz build.
Body kits
1:10 Motul Autech Z 2023, RC body set, WB257
300051731€46.99
The Motul Autech Z 2023 body set brings Super GT character to 1:10 touring car chassis with a clear polycarbonate shell shaped around the car's low nose, flared arches and pronounced aero surfaces. Its 257 mm wheelbase format suits standard touring car proportions and leaves the finish open to a full custom paint scheme. Beyond the main shell, the set uses separate parts to build up the final look with more depth. Front and rear light cases are molded in polycarbonate, while the side mirrors and large rear wing come in black ABS for stronger visual contrast once mounted. Canards sharpen the front end further, and the included masking stickers help keep window sections transparent during painting. Marking stickers provide the race livery details, and metal attachment parts are supplied for fitting the assembled shell to a compatible chassis. LEDs are not attachable to the light cases. Compatibility covers TT-01, TT-01 Type-E, TT-02 excluding TT-02B and TT-02T, TC-01, TA06, TA07, TA08 and TB-05 chassis cars. Short wheelbase chassis cannot be used, and wide tread rear chassis require conversion to narrow tread before mounting. On the bench, the clear shell, separate aero parts and livery sheet support a detailed finish; on a completed chassis, the body gives touring car builds a focused modern GT presence. Warning! Not suitable for children under 14 years.
Stickers
1:10 Neo Fighter Buggy, decal set, DT-03
319495811€14.29
This decal set is made for the 1:10 Neo Fighter Buggy on the DT-03 platform and brings the body shell to life with a full racing livery. Large NEO Fighter Buggy graphics, Frog Racing Team markings, race number 2 panels and sponsor logos create the look of a buggy prepared for the dirt track, with bold black, blue, red, white and green elements spread across the shell. The sheet contains pre-cut decals in multiple sizes, from broad body graphics to smaller technical markings. Numbered placement references printed around many stickers help identify each graphic during application. Alongside the main livery, the set also carries detail labels such as ON and OFF switch markings and CAUTION decals for hot and rotating parts. These smaller graphics add the kind of workshop and operating detail that gives an RC model a more complete scale appearance. Applied to a fresh bodyshell or used to refresh an existing build, the set supports a clean visual finish for shelf display, club running or a body restoration project. The mix of team branding, warning labels and striping suits builders who want the Neo Fighter Buggy to carry the same visual energy at rest as it does on the track. Warning! Not suitable for children under 14 years.
Body kits
1:10 NiSMO R34 GT-R Z-Tuned, RC body set
300051246€56.99
This 1:10 NiSMO R34 GT-R Z-Tuned Street RC body set brings the sharp proportions of the tuned R34 to a clear polycarbonate shell made for custom finishing. The unpainted body arrives ready for trimming, drilling and paintwork, so the final look can follow a clean street style or a more track-focused interpretation built around the same Z-Tuned form. Separate molded parts add exterior definition around areas such as the mirrors and rear wing, while the included sticker and masking material helps organize the finishing stages with more control. The instruction data specifies front and rear body mount holes at 6 to 6.5 mm, a 6 mm antenna hole, plus additional 4 mm and 4.5 mm openings in marked positions. Paint callouts in the guide identify black detail sections and silver body areas, and the shell also provides marked locations for optional LED light installation with 3 mm and 5 mm light units. On the bench, the clear shell supports a methodical build sequence: wash, mask, trim, drill and paint from the inside before applying the exterior markings. Once mounted, the long compatibility list makes this body a strong choice for refreshing an existing touring chassis or building a new R34-based setup around platforms such as TA07, TB-05 PRO or TRF419, with TRF420 and TA08 PRO usable when total width stays at 186 mm or less. Warning! Not suitable for children under 14 years.
Body kits
1:10 Peugeot 306 Maxi, body set, WB 257 mm
300051753€44.99
This 1:10 body set brings the Peugeot 306 Maxi to BT-01 long wheelbase builds with a clear polycarbonate shell shaped around the car's compact rally form. The transparent bodyshell arrives ready for painting, so the molded grille, lamp outlines, door lines and wheel arch contours can be finished in a scheme that suits the build. Separate parts recreate the side mirrors and rear wing, adding exterior pieces that stand proud of the main shell instead of being left as flat surface detail. Marking stickers supply the Peugeot 306 Maxi graphics, while masking stickers help cover window areas during the paint job for cleaner edges and a more defined final result. Metal attachment parts are included for mounting these detail components. The set is intended for 1:10 touring car use and matches BT-01 chassis cars in the long wheelbase 257 mm format. On the bench, the clear shell, masks and livery sheet support a step-by-step finishing process from paint preparation to final decals. Once mounted on a compatible chassis, the compact hatchback profile, rear wing and rally markings give the car a motorsport look that stands out during running sessions or as part of a finished collection. Warning! Not suitable for children under 14 years.
Body kits
1:10 Porsche 911 Carrera RSR, RC body set
300051543€51.49
This 1:10 Porsche 911 Carrera RSR body set brings the wide-arched silhouette and rear wing of the classic race car to short wheelbase touring chassis. The clear polycarbonate shell is molded in 1 mm thickness, giving builders a lightweight base for a custom painted finish and race-inspired detailing. The set is supplied as body parts rather than a complete car, with the shell prepared for trimming, drilling and paintwork to match the chosen chassis layout. A separate black ABS side mirror adds a distinct exterior detail instead of leaving that feature molded into the clear shell. The included markings reproduce the well-known Carrera RSR Team appearance with Martini stripes, number graphics and sponsor-style details across the body. Window masking seals are also included, supporting sharper paint lines around the glazing areas during finishing. The body features a 251 mm wheelbase and is intended for short wheelbase applications. Compatibility covers TT-01, TT-01 Type-E and TT-02 chassis in short wheelbase form, making the shell a focused choice for builders updating an existing touring car platform or planning a period racing look. On the bench, the clear shell, separate detail part and full decal set leave room for an individual paint approach while staying true to the classic endurance-racing character of the Porsche 911 Carrera RSR.
Body kits
1:10 Porsche 911 GT3 (992), RC body set
300051705€39.99
This 1:10 RC body set brings the shape of the Porsche 911 GT3 (992) to compatible touring car chassis with a lightweight polycarbonate shell that is ready for cutting, painting and detailing. The separate rear wing and front light cases give the finished body more depth, whether it is being prepared for track use or built as a display-focused shell between running sessions. The set contains a clear polycarbonate body part set, marking stickers and masking stickers for painting. Black molded parts recreate the side mirrors and wing stays as separate exterior details, while metal attachment parts are supplied for mounting. The shell is compatible with TT-02, TT-01 and TT-01 Type-E chassis, excluding TT-02B and TT-02T. Fitment is limited to short 251 mm wheelbase chassis, and wide rear tread layouts need to be changed to a narrow rear tread setup. Chassis and cockpit parts are not included. On the bench, the clear shell leaves room for custom paint schemes, window masking and careful decal placement. Once mounted, the low, wide 911 silhouette, rear wing profile and detailed light areas give touring car builds a focused road-going race look.
Attachment parts
1:10 Porsche 911 GT3 R (992), RC assembly kit
300051756€8.99
This 1:10 RC assembly kit brings the Porsche 911 GT3 R (992) into a build centered on scale form and track-ready layout. The polycarbonate bodyshell measures about 479 mm long, 188 mm wide and 127 mm high, and it recreates the car's aerodynamic shape with separate polycarbonate rear wing and light cases for added depth across the finished shell. Black molded parts depict the side mirrors and wing stays, adding crisp contrast against the painted body. The TT-02 chassis uses a shaft-driven 4WD layout, and its widely used design gives the build a clear mechanical structure with room to explore setup changes over time. A short 251 mm wheelbase defines the stance, while black 10-spoke wheels and slick tires complete the touring car look. Item 51226 Urethane Bumper L is included to support body protection during running. ESC and a Type 540 Torque-Tuned motor are part of the kit, and stickers plus masking stickers help with livery work and paint lines. On a workbench, the separate body parts and finishing materials turn painting into a focused stage of the build. Once assembled, the chassis layout, wheel package and detailed shell suit practice runs, shelf display, and repeat sessions spent refining setup and finish. Radio gear, a battery pack, a charger and paints are required separately. Warning! Not suitable for children under 14 years.
Stickers
1:10 Racing Fighter, masking sticker sheet
319495877€12.49
This masking sticker sheet is made for the 1:10 Racing Fighter and supports a cleaner paint finish on the polycarbonate body shell. Pre-shaped film pieces help define window sections and colour boundaries before spraying, so the shell can be prepared with less guesswork at the bench. The sheet is linked to Racing Fighter kit 58628 and serves as a replacement or spare when the original masking material has been used. Its role is specific: the film is applied to selected body areas, paint is sprayed over the shell, and the covered sections remain clear until the masks are removed. That sequence matters on polycarbonate bodies, where neat separation lines and correctly placed clear zones shape the final look. As a dedicated finishing accessory, the sheet supports restoration work on a used shell as well as first-time body preparation on a fresh build. On a hobby table, the masking pieces help organise the painting stage before decals and final assembly begin. For rebuilds, touch-ups or a second body project, this sheet keeps the Racing Fighter appearance aligned with the intended body layout while focusing on accurate paint preparation for the shell itself. Warning! Not suitable for children under 14 years.
Attachment parts
1:10 Racing Wing Alpha, RC body accessory
300054729€12.49
This 1:10 Racing Wing Alpha adds a focused touring car finish with a stepped wing element and a pre-printed carbon fiber pattern on the polycarbonate surface. Mounted at the rear of a compatible body shell, it changes both the styling line and the down force effect in a way that suits race-oriented body setups. The set contains 1 Racing Wing A, 1 J Parts set for the wing stays, plus snap pins and O-rings for attachment. Installation requires a body shell with space to make attachment holes, and the fitting guide specifies a flat mounting area of 70 x 12 mm with 4 mm holes. The wing angle can be changed by reversing the direction of part J1, which alters the mounting position and gives a straightforward adjustment point during setup. The wing part arrives with the carbon pattern already printed, so the surface detail is built into the part itself rather than added later. On a touring car shell, the rear wing sits as a visible finishing element above the back deck and supports a more competition-led look. It suits body customisation, replacement builds and race-day setup changes where shell fit, wing angle and rear styling all need to work together. Warning! Not suitable for children under 14 years.
Attachment parts
1:10 Racing Wing Set 3, RC body accessory
300022015€18.39
Racing Wing Set 3 brings a competition-style rear aero update to 1:10 R/C touring car bodies that already have attachment holes for optional wings. The set combines 2 wing designs with 2 end-plate styles, creating multiple visual and setup options while keeping the fit focused on touring car shells in this scale. The wing parts come with a pre-printed carbon pattern, which gives the surface a technical finish before any extra detailing begins. One set of J parts serves as the wing stays, and the included snap pins, O-rings and screws handle attachment duties for the assembled rear wing section. The larger end-plates are not fixed to a single format: a marked cutline allows them to be adjusted between large and medium size. That added trimming option helps tailor the outline more closely to the body shape being used. Mounted on a touring car shell, the wing changes the rear profile with a clear racing look that suits track-focused builds, display bodies and refresh projects alike. It also works well when an existing shell already has wing holes and needs a replacement assembly with more than one styling route in the same pack.
Body kits
1:10 Raikiri GT, RC body set, polycarbonate
300051585€48.99
The Raikiri GT body set brings a sharp, track-style silhouette to 1:10 touring car builds with a clear polycarbonate shell shaped by Znug Design, Inc. The low nose, flared arches and large rear wing create a focused racing look that stands out once the shell is cut, painted and mounted on the chassis. This body set is supplied as an unpainted shell, giving full control over colour layout and finish. Vinyl stickers are provided for the window trim, headlights, tail lights and livery markings, while window masking seals help keep painted edges clean around the glazing areas. The separate rear wing uses wing stay mounts that allow different aero setups, adding another tuning detail to the finished car. At 190 mm width and with a 257 mm wheelbase designation in the name, the shell is aimed at touring car proportions rather than off-road formats. Compatibility covers a wide span of Tamiya chassis, including TT-01, TT-02, TB-04, TA-05 and TA06 cars. Additional fitment is possible on further platforms when the overall width is 188 mm or less, with antenna and rear body mount hole positions changed according to the chassis layout. On the bench, the clear shell supports a detailed paint and decal process; on the track, the finished Raikiri GT shape gives an RC car a distinctive modern racing presence. Warning! Not suitable for children under 14 years.
Attachment parts
1:10 Rallye-Cockpit-Set Left-Hand-Drive, cockpit set
300054491€24.79
The 1:10 Rallye-Cockpit-Set Left-Hand-Drive adds a defined interior layer to compatible Tamiya rally car body sets, bringing a visible cockpit and helmet into the cabin area for a more convincing scale look. As an updated version of Item 50463, this set is designed for builders who want to move beyond an empty shell and give a rally body more presence when viewed through the windows. The set contents focus on interior conversion rather than bodywork replacement. A vacuum-formed cockpit section creates the main cabin structure, while the separate helmet piece adds a driver detail that suits left-hand-drive rally layouts. The newly included urethane sponge broadens compatibility by accommodating a wide range of chassis widths, which helps when matching the interior to different 1:10 rally platforms. Newly designed stickers provide instrument and trim graphics that can sharpen the dashboard area once applied. Plastic model paints are required separately for custom finishing. This cockpit set suits rally body projects where the shell remains the visual centrepiece but the cabin still matters at close range. It works well for fresh builds, body refreshes and reworked display cars, especially when clear windows leave the interior easy to see during shelf display or trackside preparation.
Body kits
1:10 Snap Pin Set (10+5), body clip kit
300050197€3.49
The Snap Pin Set (10+5) brings a straightforward fix to one of the most frequently handled parts on a model vehicle: the retaining clip. With 10 large and 5 small spring cotter pins in black metal, this body clip kit keeps key fastening points ready for repeated body removal, refitting and routine maintenance on 1:10 models. Each clip is formed from bent spring wire with a rounded loop and a double-prong end that slides through the mounting hole and holds its position mechanically. The 2 sizes suit different pin diameters within the same workshop drawer, which helps when replacing a missing clip or refreshing worn hardware on a regularly used chassis. The compact format also makes the set easy to keep with field equipment, pit storage or a home workbench where small spare parts need to stay close at hand. For bodyshell changes, cleaning sessions or quick checks between runs, the mixed clip count gives immediate access to the fastening parts that are most likely to go missing first. The set also works well as a reserve for repair boxes and maintenance cases where reusable metal retainers are needed for repeated fitting and removal. Warning! Not suitable for children under 14 years.
Stickers
1:10 Sticker-Set TRF black/white, decal sheet
300042164€6.59
The 1:10 Sticker-Set TRF black/white adds crisp racing graphics to model builds with a single decal sheet filled with black and white markings. Large TRF logos, repeated Tamiya twin-star emblems and workshop-style text create a competition-focused finish that stands out on painted body shells and other compatible model surfaces. Alongside the main TRF graphics, the sheet carries TAMIYA RACING FACTORY, WORLD CHAMPION TEAM, TAMIYA, TAMIYA, INC. SHIZUOKA JAPAN, VG, volac and TRANSPEED markings. The mix of larger name graphics and smaller sponsor-style details supports more than one placement approach, whether the layout calls for bold side branding, compact bonnet markings or additional accents around rear sections and wings. Black outlines with white fill keep the look sharp against many paint colours and help the graphics read clearly from a distance. On a finished 1:10 racing body, the sheet supports anything from a restrained factory look to a busier team-style livery. It also suits refresh work on an older shell where worn markings need replacing, or a new custom build that needs motorsport character without changing the underlying body shape.
Body kits
1:10 Subaru BRZ R&D Sport 2014 Fuji, body set
300051575€48.99
This 1:10 body set captures the Subaru BRZ R&D Sport 2014 Fuji in a clear polycarbonate shell shaped for a sharp Super GT stance. The low nose, flared arches and large rear wing give touring chassis builds a focused race-car presence, while the included markings recreate the Fuji 2014 livery with the layered sponsor and number graphics seen on the full-size machine. The shell is designed around a 257 mm wheelbase, making it suitable for a broad range of touring platforms. Beyond TT-01, TT-02, TA-05, TB-04 and TA06 chassis cars, installation is also possible on TA07 PRO, TA07 MS, TA06 PRO, TA06 MS, TB-04 PRO, TB-05 PRO and TA05 ver.II chassis when overall width is 188 mm or less. TA08 PRO and TC-01 chassis can also take the body at 188 mm or less, with the antenna hole position adjusted to suit the chassis. On TA07 MSX, TB-Evo.6, TB-Evo.6 MS, TB-Evo.7, TRF419, TRF419X, TRF419XR, TRF420 and TRF420X chassis, the antenna hole and rear body mounting hole positions are adjusted according to the chassis. Window masking stickers support paint preparation on the clear shell, and the separate light, wing and fender parts add extra depth once fitted. On the bench, the set suits detailed finishing with cut, drill and paint steps before mounting to a compatible touring car chassis for track sessions or shelf display. Warning! Not suitable for children under 14 years.
Attachment parts
1:10 Touring Car Cockpit Set Left-Hand, RC accessory
300054298€23.79
This 1:10 Touring Car Cockpit Set Left-Hand brings a more lifelike cabin view to 190 mm touring car bodies, turning a clear shell into a model with visible interior depth, driver detail and dashboard presence. The vacuum-formed cockpit insert sits inside the body shell and gives left-hand-drive touring car builds a more realistic look when viewed through the windows. The set is designed as a customizable interior insert rather than a fixed one-shape part. The cockpit can be trimmed to match different body shells, and holes can be opened to suit body mount posts and antenna tube positions. Included parts support extra detailing, with a driver helmet that can be assembled in 2 versions, with visor or without visor, plus dashboard and helmet stickers for instrument and trim graphics. Velcro tape is used to attach the insert inside the shell, while 5 urethane spacers help fill wider gaps between the body and cockpit. Two tapping screws are included for assembly. Plastic cement and paints are required separately. On the bench, the set suits careful fitting, painting and finishing work for touring car shells that need a more complete interior view. Once installed, the cockpit adds visible structure behind the windscreen and side windows, making display runs, shelf presentation and scale photography look more convincing. Warning! Not suitable for children under 14 years.
Body kits
1:10 Toyota Celica GT-Four RC bodyshell set
300051728€40.99
This 1:10 bodyshell set brings the Toyota Celica GT-Four onto compatible touring chassis with a clear polycarbonate shell shaped around the coupe's rally-bred lines. Hood scoop contours, grille openings, headlight areas, window frames and pronounced wheel arches give the shell a recognisable ST185 look before paint and decals are applied. The set is supplied as a body part set for 257 mm wheelbase cars and is designed for TT-01 Type-E and TT-02 chassis platforms, with TT-02B, TT-02T and TT-02FT excluded. Marking stickers and masking stickers are included to guide the paint job and help separate window areas from the painted body sections. Metal attachment parts are also provided for mounting. The clear shell format leaves colour choice, backing coats and final livery open to the builder, while the separate detail parts add definition to the finished exterior. On the bench, the masking sheet helps organise the painting sequence before the markings go on for lights, trim and model-specific graphics. Once mounted to a compatible chassis, the finished shell suits rally-inspired road runs, club sessions or a shelf display that shows off the Celica GT-Four silhouette from every angle. Warning! Not suitable for children under 14 years.
Body kits
1:10 Toyota Celica GT-Four ST205, body set
300051750€40.99
This 1:10 body set brings the shape of the Toyota Celica GT-Four ST205 to compatible touring car chassis with a clear polycarbonate shell that is ready for trimming, painting and detailing. The 1.0 mm body captures the coupe profile with defined lamp recesses, grille lines, hood scoop contours and a prominent rear wing, giving the finished car the sharp road-going stance of the original model. The set is supplied as a clear body part package for builders who want to create a custom finish rather than start with a prepainted shell. Marking stickers add model names, light graphics and trim details, while masking stickers help keep window sections and paint lines clean during the spray process. Metal parts for attachment are also included, supporting the mounting work needed before the shell goes onto the chassis. The body is made for 257 mm wheelbase cars and is compatible with TT-01 Type-E and TT-02 platforms, excluding TT-02B, TT-02T and TT-02FT. On the bench, the clear shell allows each stage of the finish to be planned around the molded panel lines and cut points. Once mounted, the low coupe shape, rear spoiler and Celica-specific detailing give touring car runs a distinct late-1990s performance look with a body style that stands out on tarmac layouts and display shelves alike. Warning! Not suitable for children under 14 years.
Body kits
1:10 Toyota GR 86, RC body kit, polycarbonate
300051666€43.99
This 1:10 RC body parts assembly kit brings the Toyota GR 86 shape to compatible touring car chassis with a clear polycarbonate shell, separate light cases and a distinct low, wide silhouette that stands out once painted and trimmed. The form follows the GR 86 closely, giving on-road builds a recognisable coupe profile for display shelves, pit tables and running sessions alike. The shell is supplied unpainted, which leaves full control over colour layout, window treatment and final livery. Separate black ABS resin parts depict the side mirrors, adding a small but visible contrast once fitted to the finished body. A separate rear wing piece is also shown among the included parts, extending the body set beyond the main shell itself. Marking stickers handle the visual details, while masking stickers support clean paint separation on window areas and trim lines. The light cases are moulded into the polycarbonate body set, helping headlight and rear light areas read clearly after finishing. Compatibility covers TT-01, TT-01 TYPE-E, TT-02, TC-01, TA06, TA07, TA08 and TB-05 chassis cars, while TT-02B and TT-02T are excluded. For wide tread rear chassis, the rear setup should be changed to standard tread before fitting. That makes this body set a focused choice for builders planning a GR 86 conversion on an existing 257 mm wheelbase touring car platform.
Body kits
1:10 Toyota GR TS050 Hybrid, RC body set
300051612€51.99
The 1:10 Toyota GR TS050 Hybrid RC body set brings modern endurance-racing shape to an F103GT chassis with a clear multi-piece polycarbonate shell and separate aero details. Its low cockpit, long tail and layered body sections give the finished car the unmistakable profile of the TS050 Hybrid as it takes shape on the bench and on the track. The set goes beyond a single shell by using individual components for the shark fin, canards, light cases, rear wing and side mirrors, so the body gains depth through added parts rather than printed surface detail alone. Trimming and mounting call for careful preparation, with marked hole positions in 2 mm, 4 mm, 4.5 mm, 6 mm and 6.5 mm sizes shown in the instructions for body posts, accessories and antenna routing where used. Sticker sheets cover the sponsor graphics and race markings, and the included masking stickers help define window and paint areas before color is applied from the inside of the polycarbonate shell. Transparent double-sided tape pieces and a metal parts bag are included for fitting selected details. On an F103GT chassis, the finished shell suits low-slung on-road running and display between sessions, with the broad fenders, central fin and rear wing giving the car a focused prototype-racer presence. Paints and tools are required separately.
Body kits
1:10 Toyota GR Yaris Hybrid Body Set, RC body
300051707€49.99
This 1:10 Toyota GR Yaris Hybrid Body Set brings modern rally styling to compatible touring car chassis with a 1.0 mm clear polycarbonate shell shaped around the GR Yaris Rally1 Hybrid. The body lines, canards and separate front light cases give the shell a layered competition look that stands out once painted and decaled. Black molded accessory parts depict the side mirrors, side ducts, caps and the 2-piece large rear wing, adding distinct scale detail beyond the main shell. Marking stickers and masking stickers are included to support the paint process and help place the livery with clean separation between color areas. Metal attachment parts are also included for fitting the body components. The set is compatible with TT-02, TT-01, TT-01 Type-E, XV-01 and XV-02 PRO chassis. It is not compatible with TT-02B, TT-02T, wide rear tread setups or short wheelbase chassis. On a finished 1:10 touring car, the shell suits rally-inspired builds that focus on authentic bodywork and race-livery detail. Chassis and cockpit parts are not included, so the set works as a dedicated body upgrade or replacement for an existing compatible platform.
Body kits
1:10 Toyota GR Yaris, RC body set, 239mm
300051656€37.99
This 1:10 RC body set brings the compact, racy form of the Toyota GR Yaris to compatible touring chassis with a clear polycarbonate shell shaped for a 239mm wheelbase layout. The body surface carries molded grille, lamp, door, roof and spoiler lines that give the finished car a defined road-going character once trimmed, painted and decaled. The shell is supplied as a body parts assembly kit, with separate components for the side mirrors and light cases to add extra depth around the outer edges of the car. Polycarbonate keeps the body light while allowing the detailed form to stay faithful to the full-size design. The included sticker sheet covers visual elements such as lights, window frames, grille and trim, while masking stickers help prepare paint boundaries during the finishing work. Manual guidance also shows cut lines, hole positions and mounting points for chassis installation, including body post openings and antenna routing where required by the chassis setup. Mounted on a compatible M-05, M-05 PRO, M-05 Ver.II PRO or M-07 Concept chassis car with a 239mm wheelbase, the shell suits hobby bench sessions focused on painting, detailing and final fitment. It also gives existing 1:10 runners a fresh bodyshell option for road-style driving with GR Yaris styling at the center of the build.
Body kits
1:10 Toyota Land Cruiser 300 body set, CC-02
300051691€68.99
This 1:10 body set brings the Toyota Land Cruiser 300 onto the CC-02 platform with a clear 1.2 mm polycarbonate shell that captures the tall stance, broad grille area and clean SUV proportions of the full-size vehicle. The transparent body arrives unpainted, uncut and without pre-made body mount holes, so the shell can be trimmed and finished to match the chosen setup on an L-size 267 mm wheelbase chassis. The set goes beyond the main shell with separate detail parts that shape the finished exterior. Metal-plated H parts depict the door mirrors, light cases and front grille sections, while pearl white K parts add the door handles and the shark fin antenna on the roof. Marking stickers and masking stickers are included for the paint job, and metal attachment parts are also supplied for fitting the components. The dedicated body parts set is intended for compatibility with the CC-02 chassis in L-size wheelbase form. On the bench, the clear shell gives direct access to custom paintwork, window masking and trim placement before the body is mounted over the running chassis. Once assembled, the combination of plated trim parts, pearl white accents and model-specific stickers gives the Land Cruiser 300 shape a finished scale presence suited to trail-style RC builds and display between runs.
Stickers
1:10 VW Golf II GTI 16V Sticker Bag, decal set
319490164€14.29
This 1:10 sticker bag is made for the VW Golf II GTI 16V Street body and brings the shell closer to its full road-car look with model-specific graphics and masking pieces. The decal sheet carries body-side stripes, grille elements, headlight graphics, rear light details, wipers and Volkswagen Golf markings, while the separate masking sheet prepares the clear body for paint work on the window areas. The masking stickers are cut for front, rear, left front, right front, left rear and right rear window sections, so the paint stage can follow the body lines more closely. Larger masks use a center strip in the lining to help keep placement aligned while the backing is removed. Smaller round and side pieces support detail work around secondary areas of the shell. A separate label section adds ON, OFF and caution markings that suit switch locations and finishing touches on the completed model. On the bench, this set supports the paint and detailing stage rather than the mechanical build, giving the shell the trim contrast and printed markings that define the Golf II GTI 16V shape. It suits replacement work on a used body as well as a fresh finish on a new shell where crisp window borders and accurate exterior graphics matter.
Body kits
1:10 VW Karmann Ghia, RC body set, 239mm
300051635€39.99
This 1:10 R/C body parts assembly kit brings the classic VW Karmann Ghia shape to custom chassis builds with a lightweight polycarbonate shell and finely molded exterior lines. Rounded fenders, window outlines, hood contours and door details give the coupe its distinctive profile before paint and final detailing are applied. The set is built around body preparation and finishing rather than a complete running car. Separate plated parts depict the side mirror, bumpers and light cases, so key trim areas stand out against the painted shell. Marking stickers add badges, light graphics and exterior accents, while masking stickers help define painted sections with cleaner edges. The body requires a 239 mm wheelbase for fitment. Manual preparation steps shown in the supplied documentation include trimming the shell, making body mount holes and preparing the surface before painting. On a compatible chassis, the shell suits retro road car conversions, period-inspired display builds and detailed repaint projects. The clear body format leaves room for individual color schemes and finishing choices, whether the goal is a clean street look, chrome-accented classic styling or a carefully decaled scale replica.
Attachment parts
1:14 Mirror/Steps 56375, scale model parts
319115577€24.99
This 1:14 Mirror/Steps 56375 parts set adds exterior detail to a scale vehicle build with chrome-finish components arranged on a single sprue. Mirror pieces, step sections and trim elements give the bodywork sharper definition, while the reflective surface helps these fittings stand out against painted cab and chassis sections. The frame shown for this set carries multiple accessory shapes, including narrow side-step style parts, perforated plates, curved guard pieces, bracket forms and a larger box-like panel with molded circular detail. That mix supports restoration work on an older build as well as fresh detailing during a new assembly. Because the parts arrive unassembled on the runner, placement follows the needs of the specific model section being completed or refreshed. The metallic finish also suits display builds where smaller exterior fittings need the same visual presence as the main body panels. On the bench, this set fits naturally into body detailing, replacement work and finishing stages where mirrors or steps define the look of a working vehicle. In a display setting, the added fittings help a 1:14 truck or utility-style model read with more depth from side and front viewing angles. Warning! Not suitable for children under 14 years.
Stickers
1:14 Volvo FH16 750 Sticker Set, model decals
319490132€30.99
This 1:14 decal set is tailored to the Volvo FH16 Globetrotter XL 750 4x2 Tractor and brings the model's cab, dashboard and exterior panels to life with truck-specific markings. Large FH16 750 graphics, GLOBETROTTER lettering and VOLVO wordmarks create the signature look of the full-size vehicle, while smaller technical labels add the finishing touches that make a scale build read more convincingly at close range. The sheet also covers areas that often define the realism of a finished truck model: instrument cluster graphics, infotainment-style controls, switch markings and console details for the cabin interior. Rear hazard panels in red and yellow, triangular reflectors, grille-style patterns and European-style number plates extend that detailing across visible exterior sections. A full alphabet and number set opens up additional custom lettering and registration options without changing the truck theme. Used during the finishing stage, the decals help turn painted bodywork and cabin parts into a more complete display or running model. They suit careful restoration work, replacement of worn markings or a fresh visual update on the Volvo FH16 Globetrotter XL 750 4x2 Tractor, especially where crisp branding and dashboard detail make the biggest difference. Warning! Not suitable for children under 14 years.
Attachment parts
1:14 Y Parts Fenders 56375, model spare parts
319225246€19.79
This 1:14 Y Parts Fenders 56375 set supplies moulded body components for scale model assembly, centring on curved fender sections and related support pieces that shape the outer wheel-area bodywork. The black parts arrive attached to sprues, which keeps the individual sections organised for identification, trimming and fitting during the build or repair process. Alongside the main fender pieces, the set shows rectangular panels with circular mounting holes, a larger frame-style section and smaller connector-like parts, giving the builder the specific body elements needed for this spare-parts group. The moulded format suits precise cleanup before installation and helps maintain consistent part geometry across matching left and right sections where the design requires it. As a replacement set, it is useful when an existing build needs fresh outer panels after wear, damage or a missing section. The 1:14 scale makes it relevant for large-format truck modelling where body proportions and wheel coverage need to stay true to the original layout. On the workbench, the sprue arrangement makes it easier to sort the different shapes before cutting them free and test-fitting them to the model. In a restoration or continuation build, these fender parts help return the bodywork to a complete, coherent look with the correct shaped sections in place. Warning! Not suitable for children under 14 years.
Body kits
6mm Snap Pin, model accessory, pack of 15
300051537€3.69
This 6 mm snap pin set adds a small but essential fastening part to the workshop bench, with 15 matching clips supplied for model maintenance, replacement work and general spares. The bent wire shape is designed to slide over a pin or axle and hold the connection in place, giving mechanical assemblies a simple retaining method that can also be removed again when access is needed. Each clip uses a rounded loop at one end, a straight leg and a spring-shaped upper section that creates the holding action once fitted. That shape makes the set useful wherever a model requires this style of retainer rather than a threaded fastener or permanent fixing. The included quantity supports repeated service jobs across more than one build, and the matching 6 mm size keeps the pack consistent when a specific fit is required. Included: 15x cotter pins. On the workbench, these spare clips help keep running gear, linkages or similar pinned connections secured after cleaning, part swaps or routine wear replacement. They also make practical stock for builders who prefer to keep commonly used fastening hardware ready alongside other workshop essentials. Warning! Not suitable for children under 14 years.
Body kits
7mm Body Snap Pin Set, model accessory, 10 pieces
300050956€4.79
This set supplies 10 large body snap pins in a 7 mm size for model and RC maintenance where removable fastening is part of regular use. The bent metal wire shape combines a rounded loop at the top with 2 angled legs, creating a simple retaining clip that can be inserted through a mounting hole and removed again by hand when access is needed. Used as body retainers, these pins help hold attached sections in place while keeping the connection easy to release for battery access, chassis checks or bodyshell changes, where the compatible model uses this format. The black metal finish keeps the set visually uniform across all 10 pieces. Because the pack contains matching clips rather than mixed hardware, it supports consistent replacement when original retainers are lost, worn or set aside during maintenance. The compact format also makes the set practical for tool cases, pit boxes or spare-parts drawers. On the bench, the 7 mm pins suit routine rebuilds and shell swaps that call for quick removal and refitting instead of permanent fixing. During running sessions or display preparation, keeping identical spare retainers close at hand helps avoid interruptions when a fastening clip is missing. Warning! Not suitable for children under 14 years.
Attachment parts
Adjustable Wing Stay Set, RC body accessory
300054773€45.79
This aluminum wing stay set adds a wider range of rear wing adjustment to touring car body setups, with angle positions in 8° increments from 8° to 32°. The layout supports clear, repeatable changes when the rear wing needs a lower or steeper mounting angle for a different body configuration. The stay design also moves the wing farther back than the previous aluminum wing mount, with 10 mm or 20 mm rearward positioning depending on the attachment holes used. The set contains 2 wing stay mounts and 2 adjustable parts, and the document image shows matching hardware such as screws, washers, spacers and O-rings for installation. It is intended for touring car bodies with enough room to create attachment holes, so the shell itself determines the final fit. Wing parts are sold separately. Compatible wing sets named in the data include 54729 RC Racing Wing Carbon Pattern, 54688 RC Racing Wing Set 2 Carbon Pattern, 54494 RC Racing Wing Set 2, 54458 RC Racing Wing B, 54457 RC Racing Wing A, 53604 RC Racing Wing Set and 53470 RC Lightweight Wing Carbon. On a prepared touring car shell, the adjustable stays support fine rear aero positioning for track-focused body tuning.
Attachment parts
Alfa Romeo Giulia H Parts, model car trim sprue
309005512€14.49
This H parts sprue for an Alfa Romeo Giulia model concentrates on the brightwork and small fittings that define the car's character. The chrome-plated runner presents front-end trim pieces in a clean layout, including the grille section, round headlight components, side mirrors and a steering wheel, so the build gains the crisp visual accents associated with a classic Italian saloon. Each component remains attached to the molded frame until the chosen stage of assembly, which keeps the smaller parts grouped and easier to sort during the build. The reflective plated finish gives exterior details a distinct contrast against painted body panels, while the steering wheel adds a matching focal point inside the cabin. Because the sprue gathers several visible trim elements on one runner, it supports a more coherent look across the front fascia and interior touchpoints. On the workbench, this parts set suits careful trimming, test fitting and finishing alongside the main body sections of the model. Once installed, the grille, lamps and mirrors help the Alfa Romeo Giulia shape read clearly from front and side angles, while the steering wheel completes the dashboard area with a period-style detail. Warning! Not suitable for children under 14 years.
Body kits
Alfa Romeo Giulia Sprint GTA body set, MB-01
300051729€35.99
This clear polycarbonate body set brings the Alfa Romeo Giulia Sprint GTA Club Racer shape to MB-01 chassis cars with the lean proportions and classic coupe lines of the original racer. The lightweight shell is formed in transparent polycarbonate, ready for painting and finishing to suit a detailed M-Chassis build with a 225 mm wheelbase. The set contains more than the main shell alone. Sticker and masking sticker sheets are supplied to support the paint job and to add the club racer inspired graphics after painting, while metal attachment parts are provided for fitting. The included design elements are based on the look of club racers run by amateur drivers, giving the finished car period-style number circles, striping and trim details. Compatibility is specified for MB-01 chassis cars, so the shell is intended for that platform rather than a universal fit. On the bench, the clear shell allows the body lines, window areas and trim sections to be prepared before color is applied. Once mounted on a compatible chassis, the finished Giulia Sprint GTA body gives an RC car a distinct vintage competition character suited to display between runs and to driving sessions where classic motorsport styling is part of the appeal. Warning! Not suitable for children under 14 years.
Body kits
Alfa Romeo Giulia Sprint RC bodyshell 225 mm
311825421€32.99
This RC bodyshell brings the Alfa Romeo Giulia Sprint into a 225 mm wheelbase format with a clear polycarbonate shell shaped for hobby finishing and mounting. The transparent form shows the full sedan profile before paint, with molded panel lines across the bonnet, roof, doors and rear section that help separate trim details and body contours during the finishing process. The shell is supplied unpainted, leaving room for custom liveries, period road-car colours or race-inspired schemes matched to a chosen chassis build. Wheel arch openings and the lower flange indicate where trimming is required, while the molded surface details provide visual reference for window frames, side trim and front-end features. The body shape carries the upright proportions and compact stance associated with the Giulia Sprint, giving the finished RC car a distinct classic touring look rather than a generic shell. Mounted on a compatible 225 mm setup, the bodyshell suits hobby sessions centered on painting, detailing and refining a vintage on-road appearance. It also works well for display between runs, where the crisp lines, clear glazing areas and recognizable Alfa Romeo front-end character remain visible even before final finishing. Warning! Not suitable for children under 14 years.
Body kits
Alpine A110 Jaegermeister Body Set, RC body shell
300051690€41.99
The Alpine A110 Jaegermeister Body Set brings the classic 1973 coupe silhouette to M-chassis builds in a clear 1.0 mm polycarbonate shell. Its formed body lines recreate the compact 2-door shape with a light structure suited to RC use, while the Jaegermeister racing livery gives the finished car a period competition look. This set is designed for M-08 Concept, M-05 and M-06 chassis cars with a 210 mm wheelbase. The shell is supplied clear for trimming, drilling and painting, with masking stickers for windows and light areas and a marking sheet for the final graphics. Two race number schemes are provided, No.102 and No.34, allowing different period-style finishes from the same body set. Separate detail parts support the exterior look, including fitted components for lights, mirrors and trim areas, and metal parts are supplied for attachment. Paints and tools are not included. On the bench, the clear shell supports a step-by-step finishing process: trim the edges, prepare the mounting holes for the chosen chassis, paint from the inside, then apply the markings and fit the detail parts. Once mounted on a compatible 210 mm chassis, the low, rounded coupe form and bold motorsport graphics give club running sessions or display storage a distinctly vintage rally character. Warning! Not suitable for children under 14 years.
Body kits
Audi R8 LMS 2008, RC body set, 257 mm wheelbase
300051754€47.99
This RC body set brings the Audi R8 LMS 2008 into a clear polycarbonate shell shaped for 257 mm wheelbase touring car chassis. The transparent bodyshell arrives unpainted, so the surface is ready for custom colour work, race livery placement and a finish matched to a chosen build. Molded lines define the hood, grille, headlights, side vents, roof contours and rear section, giving the shell the low, wide stance of the GT racer. The set also contains a separate black rear wing and wing mounts, so the tail section can be built with the raised aerodynamic profile shown on the full-size car. A printed decal sheet covers visual details such as lights, grille elements, Audi rings and Audi Sport markings, which helps turn the clear shell into a recognisable circuit-style body. Yellow window masks are included for the glazing areas and support neat paint separation during the finishing process. On the bench, the shell suits builders who want to cut, paint and detail a touring car body around a specific race-car shape. Once finished and mounted to a compatible 257 mm chassis, the body gives club racing, practice sessions or display storage a distinctly modern GT look with crisp surface definition and motorsport graphics. Warning! Not suitable for children under 14 years.
Body kits
BBX Body Set, RC body panels for BB-01
319335891€22.79
The BBX Body Set brings the distinctive shape of the BB-01 platform back to the bench with 4 vacuum-formed shell parts in a transparent smoke-gray finish. The set combines 1 large main body section, 1 smaller cover piece and 2 matching side panels, creating the layered exterior lines that define the BBX silhouette once trimmed and mounted. Each panel is supplied as molded bodywork rather than pre-cut finished parts, which leaves room for careful trimming, paint planning and a layout matched to the chosen build. The vacuum-formed material keeps the shapes crisp across the raised contours and recessed sections visible on each panel. Molded fastener details add extra surface definition, giving masking lines, panel accents and other finishing steps a clear structure to follow. As a dedicated body set, these parts suit a fresh shell project just as well as a rebuild after hard running or a cosmetic update between paint schemes. On the workbench, the 4-piece format helps separate the body into distinct sections for cutting and finishing. Once prepared, the panels restore the BBX look with the same technical, futuristic character shown by the original body layout, making this set a focused choice for spare bodywork, refinishing plans or a second shell kept ready for later use. Warning! Not suitable for children under 14 years.
Stickers
BBX Car Number Stickers, decal sheet for RC model
311421862€5.99
This BBX car number sticker sheet is made for adding race-style numbering to the BBX based on the BB-01 chassis and linked in the data to model 58719. As a dedicated decal accessory, it supports body finishing with markings that fit the look and identity of that specific RC buggy rather than a generic mixed graphic set. The sheet focuses on car numbers, making it useful when original decals are worn, when a bodyshell is being refinished, or when a fresh visual layout needs model-matched numbering. Its self-adhesive sticker format keeps application straightforward on compatible body surfaces and allows precise placement of the number graphics where the shell design calls for them. Because this is a model supply rather than a complete vehicle, the emphasis stays on visual detailing and replacement graphics for an existing build. On the bench, the sheet can be kept alongside paints, masking tape and spare decals for routine restoration work on a BBX shell. It also suits a rebuild where the body is being refreshed after running sessions and the number markings need to be reapplied in a clean, consistent way. Warning! Not suitable for children under 14 years.
Attachment parts
BBX Driver Figure Z Parts, model accessory set
319225151€6.29
BBX Driver Figure Z Parts add molded detail components to a figure-focused model build, with white unassembled pieces arranged on a sprue for clean removal, preparation and fitting. The set brings a distinct ornamental look through a rectangular panel with a sculpted bird motif, creating a strong visual accent when worked into a compatible BBX layout. Alongside the main panel, the sprue carries 2 rounded cap-like parts with central holes, 1 small rectangular piece with a hole, 1 circular ring piece and 1 curved half-ring piece. One rounded component features an embossed face-like detail, introducing another shaped surface that can change the finished look of the assembly. The visible connection points indicate a peg-and-hole joining method, so placement and orientation can be checked before final fixing. The molded format also keeps the individual sections grouped together until the build reaches the fitting stage. On the workbench, these parts suit builders refining a driver figure area or adding themed trim to a BBX project. The separate components support careful cutting, dry fitting and positioning, making the set a focused choice for detail work within a larger model assembly. Warning! Not suitable for children under 14 years.
Body kits
Beetle 1967 Body Set, RC body shell for 58173
301825147€40.99
The Beetle 1967 Body Set brings classic rounded bodywork into an RC build with a clear polycarbonate shell shaped for 58173. Its transparent finish leaves the full surface ready for custom paint, while the familiar roof arc, curved fenders and compact rear section give the car its unmistakable 1967 silhouette once mounted on a chassis. Moulded panel lines define the doors, hood, side windows and rear engine cover, giving painters and detail-focused builders clear visual guides for masking and finishing. Marked body post positions are already visible on the shell, helping align mounting points before installation. A flat trimming flange runs around the lower edge so the outline can be cut cleanly to suit the final setup. As a replacement body set, this shell also suits rebuilds where an earlier body has taken track wear or where a new colour scheme is planned. On the bench, the clear shell supports careful cutting, test fitting and paint planning before the first run. Once finished and mounted, the Beetle form stands out through its rounded profile and vintage proportions, whether the aim is a period-inspired racer, a clean road-car look or a refreshed chassis presentation. Warning! Not suitable for children under 14 years.
Attachment parts
Blackfoot 3 G-Parts Glasses Smoke Spare Set
319005372€8.89
The Blackfoot 3 G-Parts Glasses Smoke spare set supplies the tinted glazing needed to refresh the body appearance of an existing Blackfoot 3 build. Transparent brown injection-molded pieces on a single sprue provide the shaped window sections shown for this replacement set, giving the body its smoked screen look again once fitted. The formed parts include a large curved windshield section and an additional wide curved panel, along with molded attachment points that stay connected to the frame until removal. That layout helps keep the clear pieces together during storage and preparation, instead of leaving loose glazing parts to pick through one by one. The transparent material keeps the window areas visually open, while the smoke tint changes the overall body character compared with fully clear glazing. As a model spare, this set is aimed at repair, restoration or parts replacement rather than a complete vehicle build. It suits workshop use when an original screen has been scratched, lost or damaged, and it also fits rebuild projects where an older body needs fresh glazing to complete the shell again. For shelf display, the tinted panels restore the darker window finish that helps the Blackfoot 3 body look complete and consistent. Warning! Not suitable for children under 14 years.
Attachment parts
Body and Driver Figure Parts Set for 58618 Model
319115431€8.99
This parts set brings the body shell and driver figure elements for the 58618 Mt.Bee. build together on one red moulded sprue, giving the model its distinctive outer form and a seated cockpit character. The unassembled frame groups the major pieces clearly, so each section can be identified before cutting, fitting and final placement on the vehicle. The visible moulded components include a rounded shell with wheel openings, a separate rectangular panel, additional flat cover sections, a torso with arms in a driving pose, a driver head, a helmet shell, a steering wheel, 2 pedal-shaped parts and several small connectors. That mix supports both the visual identity of the model and the interior driving position rather than covering only one area of the build. The driver parts are supplied as separate pieces, which allows the figure and helmet to be assembled in sequence before installation. The steering wheel and smaller fittings add the control details that complete the cockpit scene. On the bench, the sprue layout helps keep the body and figure parts together during preparation for the 58618 Mt.Bee. model. Once assembled, the shell panels and driver components work together to give the vehicle a finished appearance with a clear seated driving setup. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Body Mount Set, RC spare parts for DT-03 chassis
300050855€9.99
This E-parts body mount set is made for selected RC chassis and supplies the core parts needed when body fixing points need replacement. It fits DT-03, DT-03T, G6-01, G6-01TR, TL-01, FF-02 and WR-02 applications named in the data, combining molded mounts with matching hardware for a direct service task at the shell mounting area. The black components are shaped for chassis attachment and body support, while the included mounting material covers the fastening work tied to this set. Multiple hole positions on the molded parts allow the mounting point to be set according to the chassis layout and shell position, which matters when replacing worn posts or correcting body fit after use. As E-parts, these components suit maintenance benches, rebuilds and parts boxes where chassis-specific replacements need to stay close at hand. The set works well during routine RC upkeep, after a cracked mount, or when a stored chassis is being returned to running condition with the correct fixing parts. In workshop use, the combination of mounts and screws keeps the repair centered on one compatible set instead of mixing unmatched hardware from different spares. Warning! Not suitable for children under 14 years.
Body kits
Body Set Citroen 2CV Charleston, RC body set
300051605€40.99
The Body Set Citroen 2CV Charleston brings the unmistakable silhouette of the classic compact car to compatible M-chassis builds in lightweight polycarbonate. Rounded fenders, the curved roofline and the rear spare wheel cover shape give the shell a period-correct look that changes the whole stance of a chassis once mounted and finished. Separately molded plated parts are supplied for the headlights and side mirrors, so key exterior details are handled as distinct components rather than molded into the shell alone. The set also comes with stickers for the markings and a dedicated masking sticker sheet for paint work, which helps define window areas and trim lines during finishing. Instruction artwork shows body preparation with cut lines and mounting holes in 2 mm, 4 mm and 6 mm sizes, plus guidance for antenna routing where needed. The shell is made for L wheelbase 239 mm applications and is compatible with M-05, M-06 and M-07 Concept chassis cars. On the bench, the clear body gives builders room to choose the final paint scheme while keeping the Charleston character through its molded proportions and trim layout. Once mounted on a compatible chassis, the compact vintage form creates a very different road presence from modern hatchback or racing shells, making club running sessions and display storage feel more individual.
Body kits
Body Set Ford Escort MK.II Rally, RC body shell
300051658€41.99
This RC body set brings the Ford Escort MK.II Rally into a clear polycarbonate shell shaped for a 239 mm L wheelbase MF-01X chassis. The lightweight body captures the car's square-cut rally profile, while separate polycarbonate light cases and additional molded exterior parts give the shell more depth once painted and assembled. White injection molded parts are supplied to recreate the side mirrors, bumper and fog lamps, so the finished shell carries distinct exterior pieces rather than a single-piece look. The set also provides masking stickers for the paint job and marking stickers for the final livery, supporting the usual inside-painting process used for polycarbonate RC bodies. The manual notes cut and mounting work such as 6.5 mm and 4 mm holes, plus body attachment on the MF-01X long-wheelbase layout. An LED light unit can be fitted if installed separately. On the bench, the clear shell leaves room for individual color choices, window tint treatment and careful decal placement across the Escort's classic rally lines. Once mounted on a compatible chassis, the separate lamps, mirrors and bumper help the body read clearly from multiple angles during running sessions or display between drives.
Body kits
Body Set MB Race Truck Actros MP4, RC body set
300051654€63.99
The Body Set MB Race Truck Actros MP4 brings racing truck styling to an RC build with a polycarbonate shell shaped for the body, cab and coupler. Its form follows the look of a competition tractor unit, so the finished model carries the tall cab profile, pronounced front section and track-focused character associated with truck racing. Separate molded parts add exterior definition beyond the main shell. Side mirrors, front and rear light cases, and the grille emblem are supplied as individual components, so these areas stand out with more depth than a one-piece body alone can provide. The set also contains stickers for sponsor markings and livery, which help recreate the layered graphics used on race trucks. As a spare body set, it suits replacement work, a fresh shell for a running chassis, or a second body prepared with a different paint scheme. Compatibility with the TT-01 Type-E and TT-02 chassis makes the set relevant for hobbyists already building on these platforms. The clear body format supports custom painting before final mounting, whether the aim is a race-inspired finish for track sessions or a detailed display shell with motorsport presence.
Body kits
Body Set NSX, RC body set, 190mm touring car
300051586€48.49
This RC body set brings the Acura NSX shape to 190mm on-road touring car chassis with a clear polycarbonate shell that is ready for trimming, painting and final detailing. The low, wide coupe form gives touring car builds a modern supercar look, while the transparent finish leaves full control over color choice and race-inspired styling. The shell is designed for 257mm wheelbase chassis and can be fitted to a wide range of Tamiya platforms when the overall width is 188mm or less. Depending on the chassis, the antenna hole and rear body mounting hole positions may need to be changed to match the layout. The set also provides separate mirror parts, masking stickers and interior headlight depictions, so the finishing process can move beyond a plain shell into a more complete scale exterior. Marking stickers allow either Honda or Acura decoration, and the layout also supports a left- or right-hand drive appearance. On the bench, the clear shell supports a full custom paint sequence from inside the body, with masking used for windows and light areas before the final graphics go on. Mounted on a compatible touring car chassis, the 190mm width and NSX lines create a focused road-car stance suited to club running, body replacement or a fresh visual direction for an existing machine. Warning! Not suitable for children under 14 years.
Body kits
Body Set Sand Scorcher 2010, RC body set, ABS
300051406€60.99
Body Set Sand Scorcher 2010 brings the unmistakable Baja Bug shape to an RC build with an ABS shell, widened fenders and an open roof section that gives the body its lean desert-racer profile. The set is presented as an assembly body package, with separate molded parts laid out for painting, detailing and final fitting. Alongside the main shell, the contents shown include a clear tinted window section, chrome-plated exterior parts, a driver torso figure and a large marking sheet. The decal selection covers Baja Bug graphics, sponsor-style logos, caution labels, switch markings and number options including 506 and 537, allowing different race-inspired finishes. Manual references also show separate light parts, rear lamp details, a license plate section, exhaust pieces and mounting hardware such as screws, washers, nuts, body mount plates and a snap pin. Paint and cement are not included, and the instructions indicate color detailing for areas such as lamps, trim and exterior accents. On the bench, the body set suits builders who want to paint a classic off-road Beetle-style shell and add period-style markings with precise placement. Once fitted to a compatible chassis, the finished body gives an RC buggy a strong vintage racing character with visible cockpit, lighting and trim details.
Body kits
Body-Set Mitsubishi Lancer EVO X RC bodyshell
300051376€56.99
The Body-Set Mitsubishi Lancer EVO X brings the unmistakable shape of the Evolution X to 1:10 touring car builds with a clear polycarbonate shell that captures the sedan's low nose, pronounced grille area and strong rear wing profile. Once painted and mounted, the shell gives compatible chassis a road-car presence that reads clearly on the track and on the bench. This body set is designed for a standard 257 mm wheelbase and suits chassis with a total width of 186 mm or less. Compatibility listed in the data includes DF-03Ra, TT-01 standard wheelbase machines, TA07 series platforms, TA06 series platforms, TB-03, TB-04, TB-05, TA08 PRO, TC-01, XV-02PRO and multiple TRF419 and TRF420 variants. The shell supports lighting installation with up to 8 positions for 5 mm LEDs and 6 positions for 3 mm LEDs, allowing detailed front and rear lamp layouts. White H mirror parts, silver metal plated J light cases, screws, nuts, stickers and masking seals are included for finishing work. During a fresh body build, the masking seals help define window lines before paint, while the separate light cases and mirrors add depth once the shell is trimmed and assembled. On a completed chassis, the EVO X form suits club running, display between sessions and custom touring car projects built around realistic saloon styling. Warning! Not suitable for children under 14 years.