Model kit accessories
Discover our extensive range of model kit accessories: from adhesives and masking tape to precision tools and sanding materials. You'll find everything you require for your perfect modelling project here: browse through our categories and find the right accessories! Find out more with just one click.
Model-making abrasive material
#1500 Sanding Cloth, model hobby sanding sheet
300087233€4.69
This #1500 sanding cloth brings controlled surface refinement to model hobby work with a fine abrasive grade and a soft sheet format. The 170 x 130 mm sheet sits comfortably in the hand and reaches flat panels, edges and smaller shaped sections where a rigid abrasive can feel less forgiving. The cloth can be used for both dry and wet sanding, making it easy to match different finishing steps and material needs. The #1500 grit is part of a 5-grade range that also includes #600, #1000, #2000 and #3000, with the number indicating the grit level. Its soft construction develops limited fold lines, a useful detail when working across visible surfaces where deeper scratch marks can interrupt the next coat or polishing stage. One sheet is included. On the bench, it suits careful smoothing between shaping, priming and finishing steps on model hobby projects. The flexible sheet format also makes it easier to wrap around contours or guide across narrow areas with steady pressure when a clean, even surface matters. Warning! Not suitable for children under 14 years.
Model-making abrasive material
1500 Sanding Sponge Sheet, model finishing abrasive
300087150€6.19
The 1500 Sanding Sponge Sheet brings fine surface finishing to model work with a flexible abrasive layer bonded to a cushioned backing. That combination helps the sheet sit against curves, edges and narrow parts with steadier contact than a rigid sanding surface, making it useful for refining small components by hand. The 1500 grit is suited to light finishing passes where surface texture needs to be reduced without removing too much material at once. The sponge base can be cut into smaller pieces for targeted work on tubes, rods and other shaped sections, and the sheet format leaves room to prepare custom sizes for different stages of a build. Used dry by hand, it supports controlled smoothing on detail areas, cleanup around joins and preparation before the next finishing step. On the workbench, the sheet fits the kind of close, careful handling used on scale parts, body details and other small sections that need a softer touch. It also works well when a narrow strip or small pad is needed to reach contours that are awkward for a standard flat abrasive sheet. Warning! Not suitable for children under 14 years.
Model-making masking tapes
1mm Masking Tape, model masking tape, 18m roll
300087206€5.791 m = €0.32
This 1 mm masking tape is made for modelling work that calls for narrow, accurate paint separation. The thin tape format follows fine contours and small sections closely, helping create sharp lines on painted and unpainted scale models. Its strong adhesive backing holds well even on uneven surfaces, which is useful around raised details, edges and shaped body sections where wider masking material can be harder to place cleanly. The tape is designed not to absorb paint colour and not to leave unsightly marks, so the masked edge stays defined and the finished surface keeps a cleaner look after removal. With a roll length of 18 m, there is enough material on hand for repeated striping, trim work and detail masking across longer build and finishing projects. The narrow 1 mm width suits fine borders, accent lines and small-area coverage on scale plastic models and radio control models. It fits naturally into paint preparation, body finishing and detail work, whether the task is isolating a slim section before spraying or protecting an adjacent painted area during careful touch-up work.
Model-making abrasive material
2000 Sanding Sponge Sheet, model finishing sheet
300087170€6.19
The 2000 Sanding Sponge Sheet combines a fine aluminum oxide abrasive with a 5 mm flexible sponge base, giving model finishing work a controlled feel on shaped parts and delicate surface areas. On plastic models, the sheet is suited to removing small protrusions while keeping contact more even across contours, where a rigid abrasive can skip or dig in. Its flexible backing bends around curved surfaces and settles into harder-to-reach corners, which helps when refining sculpted folds, rounded panels or tight edges. The 114 x 140 mm format leaves enough area for broad passes, yet the sheet can also be cut with a modeling knife into smaller sections for narrow parts, touch-up work or repeated use at the bench. Wet sanding compatibility adds another handling option when a cleaner sanding process or a finer finish is needed. Beyond plastic models, the same sheet can be used on wood and metal finishing materials, which makes it useful across different stages of a build or restoration project. It fits naturally into surface preparation before primer, smoothing after seam cleanup, and final refinement before paint or detail finishing, especially where curved shapes call for a sanding surface that can flex with the part. Warning! Not suitable for children under 14 years.
Model-making masking tapes
2mm Masking Tape, model supply, 18m adhesive roll
300087207€5.791 m = €0.32
This 2 mm masking tape brings fine control to model painting where narrow lines and tidy colour separation matter. The thin tape format follows edges closely and helps create sharp, crisp borders on painted surfaces, whether the task is outlining trim, isolating small sections or protecting adjacent areas during finishing work. Its adhesive layer is designed for modelling use and holds well even on uneven surfaces, which is useful around contours, panel shapes and small raised details. The tape also resists absorbing paint colour, helping maintain a clean barrier while work is in progress. That combination supports accurate masking on both unpainted parts and already finished sections where neat transitions are needed. The translucent amber roll format also makes it easier to place short lengths with visual control during detailed work. With 18 m on the roll, the tape suits repeated use across multiple sessions at the bench, from body detailing on radio control models to careful paint separation on scale plastic builds. It can be applied for narrow stripes, edge definition and small-area masking wherever a broader tape would cover too much surface.
Model-making abrasive material
3000 Sanding Sponge Sheet, model sanding sheet
300087171€6.19
The 3000 Sanding Sponge Sheet brings controlled finishing to model work with a flexible sponge base and an aluminum oxide abrasive surface. Sized at 114 x 140 mm with a 5 mm sponge thickness, it adapts to shaped parts while keeping a broad working area for steady, even passes across detailed surfaces. Its fine 3000 grit suits light refining work where raised spots, small imperfections and transition areas need a smoother finish before the next stage. The sponge base bends into curved sections and reaches corners that are awkward with a rigid sanding block, which helps when working on body lines, clothing folds or other sculpted details. Because the sheet can be cut with a modeling knife, smaller sections can be prepared for narrow parts or confined areas instead of using the full sheet each time. Wet sanding use adds another practical option for controlled finishing on plastic models, and the abrasive surface is also stated for wood and metal materials. On the bench, the sheet supports careful cleanup after assembly, surface preparation before paint, and final touch-up work on shaped components. Cut sections can be kept beside files, knives and other finishing tools for repeated detail work on corners, edges and curved forms. Warning! Not suitable for children under 14 years.
Model-making tools
40ml Square Bottle Holder, model accessory, 80x80mm
300087202€3.89
This 40 ml Square Bottle Holder adds a simple layer of control to model-building work by surrounding a square bottle with a PE sponge frame sized at 80 x 80 x 12 mm. The snug fit helps limit tipping if the bottle is knocked during cement application, keeping the work area steadier while parts, tools and materials are spread across the bench. The holder is intended for the 40 ml square bottles used for modeling cement and similar aids, so the bottle sits within a cutout rather than balancing on its own base. That extra support matters most during close brush work, when a hand, sleeve or tool can catch the bottle edge. The PE sponge material keeps the format light and easy to place, and the single-holder design makes it easy to position one bottle exactly where the current build needs it. An included tab also allows multiple holders to be linked together for a more ordered arrangement of bench liquids. On a busy workbench, the holder helps separate cement from painted parts, decals and unfinished assemblies by giving the bottle a defined place. It also suits longer building sessions where the same adhesive is picked up and set down repeatedly, keeping the bottle stable and close to the active work area.
Model-making tools
A3 Cutting Mat, hobby work surface, 450 x 320 mm
300074076€27.49
This A3 cutting mat creates a clean, measured work zone for model building and paper craft, with a 450 x 320 mm surface that sits slightly larger than A3 paper. The green 2 mm mat gives knives and similar tools a dedicated base while helping keep the desk underneath clear during trimming, marking and layout work. Its 3-layer structure combines a harder inner layer with softer outer layers. That construction is designed so cut ends remain less conspicuous, and it also helps the blade stay sharp for longer during repeated use. The front side is printed with a dense set of practical guides, including grids, angled lines, R curves and circular lines. These markings support alignment, spacing and repeatable shapes when preparing sheet material, planning cuts or checking symmetry on small parts. The reverse side uses a plain solid color, which changes the mat from a measured cutting surface into a simpler backing for other bench tasks. On a hobby desk, that makes it easy to move between precise knife work, template placement and general craft handling without changing the work area. The format suits model supplies, paper sheets and other flat materials that benefit from a stable, clearly defined surface.
Model-making tools
A4 Cutting Mat, hobby craft mat, 320 x 225 mm
300074118€16.79
This A4 cutting mat brings a measured, stable work surface to model making and paper craft, with a 320 x 225 x 2 mm format that sits neatly on the bench while still extending slightly beyond standard A4 paper. The green surface carries printed reference markings that keep trimming, alignment and layout work clear at a glance. The front side combines a 1 cm grid, 10-degree angle guides, a 1 mm step ruler, curved markings and circular references, giving one surface for straight cuts, angled lines and repeated shape work. A 3-ply structure places a hard inner layer between softer outer layers, a construction designed to leave cut traces less conspicuous and help preserve blade sharpness over longer use. The reverse side is plain, so the mat can be turned over when a clean surface suits the task better. The printed markings are intended as guides, and precise measurement work should still be checked with dedicated measuring tools. On the bench, the mat supports jobs such as trimming sheet material, cutting paper patterns, preparing masking shapes and setting out small model parts before assembly. It should be stored flat and kept away from high temperatures to help prevent warping over time.
Other accessories
Anaerobic Gel Thread Lock, model adhesive, red 1g
300054032€8.29
Anaerobic Gel Thread Lock is a model adhesive designed to help keep threaded metal parts from working loose during R/C use. The red gel format supports controlled placement on screw threads, so the compound stays where it is needed on small fasteners in vehicles, chassis sections and engine-related assemblies. The 1 g container is sized for precise hobby maintenance rather than broad surface bonding. Its anaerobic formula is intended for threaded connections, where it works within the joint instead of acting like a general-purpose glue across exposed surfaces. That makes it useful for screws and other metal fittings that face repeated vibration, regular handling and ongoing setup changes. The compact jar format also keeps the compound close at hand on a workbench for quick application during servicing. In practical use, a small amount can be placed on the thread before fastening a metal part into position on an R/C chassis or engine assembly. It suits routine maintenance sessions, rebuilds after running, and fresh installations where a more secure threaded hold is needed on metal hardware.
Model-making tools
Angled Round Tip Tweezers, Craft Tool, Steel
300074108€18.49
These angled round tip tweezers bring clear sightlines and controlled handling to close-detail work. The bent tip profile helps approach small parts from the side instead of directly above, which can make placement easier when working in confined areas or around raised details. The steel body gives the tool a precise, clean feel, while the broad flat grip section supports stable finger placement during slow, exact movements. The round tip form is suited to delicate handling where a sharp point would be too aggressive, making it useful for lifting, turning or settling fine materials into place. In model making, the angled shape can help when positioning markings, adjusting miniature components or guiding small pieces into narrow openings. The slim profile also suits electronics handling and other bench tasks that call for careful control over tiny parts. On a hobby desk, these tweezers fit naturally alongside assembly, finishing and detail correction work. They support steady placement during miniature builds, careful repositioning during surface detailing, and neat handling whenever fingertips are too large for the job. Warning! Not suitable for children under 14 years.
Model-making tools
Angled Tweezers, model tool, stainless steel
300174003€12.99
These angled tweezers bring precise control to close-up model work, with bent fine tips that make it easier to reach small parts and place decals where a straight tool can get in the way. The angled form keeps the working point visible during careful positioning, which helps when aligning tiny pieces on detailed builds. The tweezers are made from stainless steel and finished with a black cationic coating. This combination gives the tool a clean, technical look while supporting long-term workshop use. Rounded edges are designed to prevent scratching, an important detail when working near painted surfaces, clear parts or freshly applied markings. The slim body suits delicate handling tasks such as lifting, turning and adjusting small components during assembly or finishing. On the bench, the tool fits naturally into decal application, part placement and other fine correction work that calls for a steady grip and a narrow contact point. It also works well as a dedicated craft tool kept alongside knives, files and cutters for repeated detail sessions on scale models. Warning! Not suitable for children under 14 years.
Other accessories
Anti-Slip Sticker, model supply, 75 x 150 mm
300087227€4.19
This anti-slip sticker sheet adds controlled grip exactly where small parts, tools and work surfaces tend to shift. The 75 x 150 mm size gives enough area for display bases, rulers, mats or custom cut sections, while the synthetic rubber face creates traction and the acrylic adhesive underside holds the sheet securely after placement. At about 0.4 mm thick excluding the backing film, the material stays slim enough for close contact on precision tools and flat working areas. The polyester cloth base supports the sheet structure while keeping it flexible enough to adapt to different applications. On metal rulers and cutting mats, the added grip helps keep the contact area steadier during cutting work. Applied to tweezer tips, the surface helps hold small parts more securely. Two sheets can also be combined to create a double-sided anti-slip layer for custom workshop setups. The sheet also suits bench and display use where movement needs to be reduced without adding bulky pads. It can be placed under finishing abrasives so the abrasive stays put while a part is moved back and forth across the surface, supporting cleaner, more controlled filing and sanding work. Warning! Not suitable for children under 14 years.
Model-making tools
Basic Drill Set, model tool, 1.0 to 3.0 mm
300074049€17.99
The Basic Drill Set brings 5 drill sizes into one compact model tool set, covering 1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm and 3.0 mm for precise hole work across a wide range of hobby tasks. This spread gives a practical progression from fine starter holes to larger openings when parts need a broader pass. Each diameter serves a distinct role during model preparation and finishing. Smaller bits can be used where narrow openings or careful pilot points are needed, while the larger sizes support follow-up drilling when fittings, posts or mounting points call for more space. Keeping these 5 sizes together makes it easier to select the required diameter for the next step instead of working around a single fixed size. The set format also keeps the focus on measured, deliberate drilling rather than improvised tool choices. On the bench, the range suits routine workshop jobs such as preparing parts, adjusting openings and refining fit before final joining. It also works well for hobby sessions that move between delicate detail work and broader drilling tasks, with each bit size ready for the specific opening required.
Model-making tools
Basic File Set (3), modeling tool set, 16 cm
300074046€10.79
The Basic File Set (3) brings 3 distinct file shapes into one compact modeling tool set for controlled shaping, smoothing and edge work. Flat, round and half-round profiles make it easier to match the filing surface to the part being worked, whether the task involves straight edges, drilled openings or curved contours. Each file measures about 16 cm in length, giving a hand-friendly format for bench work where smaller parts and tighter areas need steady control. The set is specially developed for modeling use, with double-cut surfaces that support material removal on plastic and soft metals. That combination suits cleanup after cutting, refining contact points, easing tight fits and smoothing visible areas before the next build step. On a workbench, the flat file can true edges and level small surfaces, while the round file reaches into holes and narrow recesses. The half-round profile helps follow curved sections where a flat face alone cannot sit cleanly. Black handles support a firm grip through repeated strokes, keeping the focus on accurate hand finishing across hobby, craft and model-building tasks. Warning! Not suitable for children under 14 years.
Model-making tools
Bending Plier for Photo Etched Craft Tool
300074067€34.49
The Bending Plier for Photo Etched is made for the precise shaping work that gives scale builds a cleaner, more refined finish. Its long, narrow metal jaws reach small tabs and edges on photo-etched parts, making controlled bends easier when working with thin stainless metal components that demand a steadier touch than standard molded parts. A spring loop between the handles keeps the jaws open after each movement, so the plier is ready for the next adjustment without constant resetting. This helps when a part needs to be held, aligned and bent in short, careful steps. The curved black handles support a stable grip during close bench work, especially when handling tiny detail pieces where finger placement and pressure matter. In a photo-etched workflow, the plier covers the shaping stage after parts have been cut free and cleaned, giving fine metal additions their intended form before placement on the model. On the workbench, it suits tasks such as folding tabs, refining edges and positioning narrow stainless metal details before attachment. The compact, precision-led format also fits careful touch-up work on hard-to-reach areas where broader tools can get in the way. Warning! Not suitable for children under 14 years.
Model-making adhesive
Body Set R/C PC Reinf Mesh Tape, hobby tape
300054792€10.791 m = €5.40
This reinforcing mesh tape gives polycarbonate body shells a practical way to add support exactly where repeated impacts and flex can wear down vulnerable sections. Supplied as a 2 m roll with a 35 mm width, it suits targeted reinforcement on spoilers, fenders and similar areas inside an R/C body, where extra backing helps stressed sections stay usable for longer during regular running and repair work. The mesh format is the key to how it works. Instead of covering a large section with a rigid patch, the open structure can be positioned on the inside of the shell over the area that needs support. Clear silicone adhesive is required separately to fix the tape in place. That method makes it easier to reinforce curved contours and narrow sections without adding a bulky layer, which is especially useful around edges, bends and other high-strain points on lightweight polycarbonate shells. On the workbench, the roll format keeps material ready for quick trimming when a body picks up cracks, weak spots or stress around exposed sections. It also suits planned reinforcement before the next session, whether the focus is on spoiler edges, wheel arch areas or other parts of the shell that see frequent contact.
Model-making tools
Conical File 1.5-8 mm, hobby tool, #200 finish
300074164€24.49
This conical file is built for precise modification work on molded parts with holes, using a tapered filing surface to reach areas that flat tools cannot address cleanly. With an overall length of 150 mm, a 55 mm file section and a working diameter range from 1.5 mm to 8 mm, it supports controlled shaping of narrow openings, rounded cutouts and gradually widening holes on model parts. The #200 grade finish is tuned for fine adjustments rather than aggressive removal, making it useful when a part needs a cleaner edge, a more accurate opening or a smoother transition inside a curved recess. The conical form allows contact at different points along the taper, so the same tool can work near the tip for smaller openings or farther down the file for broader shaping. An embossed grip supports a secure hold while changing the filing angle across detailed surfaces. A transparent cover protects the filing section when the tool is stored in a drawer, toolbox or hobby case. On the workbench, this file suits careful fitting and cleanup on molded components that need subtle correction before final assembly or finishing. It is especially useful during test fitting, edge refinement and detail preparation where a gradual taper gives more control than a straight file.
Other accessories
Cotton Swab round extra small, hobby applicators
300087103€5.69
These round extra small cotton swabs are made for scale model work where control matters more than bulk coverage. Tightly spun cotton tips keep a cleaner shape during painting, decal application and panel lining, so small corrections and fine placement feel more deliberate at the workbench. Each swab uses an extra small head with an 8.5 mm tip length and a 2.2 mm diameter, which helps reach confined sections and narrow surface details without flooding the surrounding area. The industrial strength build is designed for hobby use rather than general household tasks, so the cotton resists fraying more effectively when wet or dipped in solvents. That makes them useful for subtle weathering, careful cleanup around markings and controlled application of finishing media on compact parts. The round tip shape also suits gentle blending and small circular motions where a pointed edge is not required. A pack of 50 supports repeated use across long build sessions, whether the task is settling decals onto body panels, refining panel lines or adding weathering to small areas such as Waterline series models. They also work well with Weathering Master Set colours when rust stains and other surface effects need a measured, local application. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab round small, hobby applicator, 50 pcs
300087104€5.69
This pack of 50 small round cotton swabs is made for scale model work where clean application and control matter. The tightly spun cotton tips keep their form more reliably than common supermarket swabs, which helps when placing decals, refining panel lines or working paint into small sections. With a 3 mm tip width and a 12 mm tip length, the swab reaches confined areas while keeping contact focused. The industrial strength design is intended for hobby use, including work with wet media and solvents. Because the cotton frays less easily, the swab leaves less loose fibre behind during detail work and reduces wasted material. The round tip shape suits dabbing, blending and controlled transfer on model surfaces, especially where a brush may carry too much material at once. It also supports weathering effects in small zones, such as rust staining and subtle surface variation. On ship subjects, aircraft details or other compact assemblies, the slim double-ended format helps move from one section to the next without changing tools immediately. The swabs can also be used with Weathering Master Set colours when building up fine effects on corners, seams and other narrow points of the model. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab round, hobby applicator, 50 pieces
300087141€6.59
These round craft cotton swabs are made for scale model work where control at the tip matters. Each swab uses tightly spun cotton that keeps its shape more reliably during painting, decal application and surface detailing than loosely wound household alternatives. The pack contains 50 swabs, giving a practical bench supply for repeated finishing sessions. The round tip measures 12.5 mm in length and 3.5 mm in width, a format suited to broader contact on small model sections while still staying manageable around edges and recessed detail. When the tip is wet or dipped in solvents, the industrial strength construction helps it resist fraying, so the cotton stays more consistent during cleanup, blending and correction work. This makes the swabs useful not only for placing decals and working panel lines, but also for refining weathering effects and applying color from weathering sets to focused areas. On the workbench, the swabs fit naturally into the finishing stages of a build: smoothing decal edges, adjusting panel line application, lifting excess material or adding subtle rust and dirt effects. The round head shape also suits repeated passes over compact surfaces where a pointed tip would cover less area with each stroke. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab Tria.extra small, hobby applicators
300087105€6.69
These extra small Tria. cotton swabs are made for model finishing where a standard household swab can feel too soft or lose its form too quickly. The tightly spun triangular cotton tips create a more defined contact area for careful work on decals, panel lining and other small surface details, especially where edges and corners need a narrower touch. Each pack contains 50 swabs, and the double-ended format puts a working tip on both sides for repeated use across painting and weathering steps. The tip section measures 8 mm, with a slim 2.3 mm profile that suits compact parts and fine surface sections. Compared with loosely spun supermarket swabs, these industrial strength swabs are designed to fray less easily when wet or dipped in solvents, which helps keep the cotton shape more consistent during detailed bench work. They fit naturally into scale model routines, from pressing decals into recessed lines to applying weathering colors in small zones. On compact subjects such as Waterline series models, the triangular tip shape helps target tight areas where broader applicators can leave excess color or disturb nearby detail. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab Tria.medium 50-Piece Cleaning Set
300087107€5.69
The Cotton Swab Tria.medium pack brings a precise, workshop-ready format to detailed cleaning and careful surface work. With 50 swabs in the pack and a double-ended layout, each piece offers two usable cotton tips on a slim white stem, making it easy to keep work moving during maintenance, touch-up preparation or dust removal around small parts. Each cotton head measures 10.5 mm in length and 4.5 mm in width, giving this Tria.medium format a balanced size for controlled contact on narrow sections, edges and recessed areas. The cotton surface supports gentle handling on finished components where a firmer tool would be less suitable. The medium tip size also suits jobs that need more coverage than a very fine point while still staying focused on small zones rather than broad wiping. On a hobby bench, these swabs fit naturally into routine care for models, tools and display pieces. They can be kept close at hand for cleaning sessions, detail work between build stages or careful upkeep of visible surfaces where neat, measured application matters. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab Tria.small, hobby tool, 50 pieces
300087106€5.69
The Cotton Swab Tria.small is a compact hobby tool for precise cleanup and controlled application work. Each swab uses a narrow cotton tip measuring 10.5 mm in length and 3 mm in width, a format that helps reach confined sections where a broader tip would cover too much area. The slim white stick carries cotton on both ends, giving 2 working tips per swab and 100 usable ends across the 50-piece pack. This layout supports short, exact motions when handling small amounts of material, lifting residue from edges or working around recessed details. The tria.small designation points to a compact tip profile, making the swabs especially suited to fine-scale maintenance and finishing tasks where contact needs to stay localized. On a workbench, the narrow tip can be used for careful touch-up preparation, gentle surface cleaning or controlled work around corners and small openings. In model building and finishing routines, the 50-count pack provides a practical supply for repeated detail sessions without taking much space in the tool area. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab Triangular 50pc Hobby Applicators
300087142€6.59
These triangular cotton swabs are made for model work where a standard household swab quickly loses its edge. The tightly spun cotton tips keep their form during painting, decal application and panel lining, giving steadier contact on small surfaces and more control around raised details. The pointed profile helps guide pigment, lining fluid or decal pressure into corners and along narrow sections that are awkward with a rounded tip. Industrial strength construction means the cotton is less likely to fray when wet or when dipped in solvents, so the working edge stays cleaner through repeated passes. The pack contains 50 swabs, ready for regular bench use across touch-ups, weathering and cleanup steps. Tip dimensions shown in the product data are 10.5 mm in length, with widths of 3.4 mm and 2.3 mm for the two illustrated pointed profiles. On a painted bodyshell, the swabs can press decals down over panel lines and contours with a lighter, more exact touch. During weathering, they help place rust stains, blend effects in confined spots and carry Weathering Master Set colours onto selected areas without flooding the surrounding surface. Warning! Not suitable for children under 14 years.
Model-making tools
Craft Knife II hobby cutter with auto-lock blade
300074153€6.39
Craft Knife II combines a slim retractable format with an ergonomic black handle and a stainless steel segmented blade for precise hobby cutting. The auto-lock slider fixes the blade at the selected extension, helping maintain a steady feel when trimming masking film, scoring sheet material or cutting clean lines through paper and card at the workbench. The blade is made from high-carbon stainless steel with a thickness of 0.38 mm, a detail that supports a fine cutting edge while adding resistance to rust. When the cutting edge dulls, the rear clip detaches by squeezing the tabs on both sides and serves as a blade snapper for removing worn sections. The blade can also be removed, reversed and reinstalled for left-handed use, so the same knife adapts to different hand positions without changing the handle layout. Commercially available small cutter knife replacement blades are compatible. On a model bench, in a craft corner or beside a cutting mat for decal and masking work, the compact body keeps the tool easy to place, pick up and reset between cuts. The retractable blade format also suits short, repeated trimming passes where controlled extension matters as much as edge sharpness. Warning! Not suitable for children under 14 years.
Model-making tools
Craft Saw Blade, replacement hobby saw blade
312997001€6.99
This craft saw blade brings fine-toothed cutting control to detailed hobby and model work. The slim metal form, long rectangular profile and narrow toothed edge suit careful trimming, separating and shaping where a broader workshop saw would feel too coarse. A rounded front tip helps the blade move into tighter working areas while keeping the cutting edge clearly visible during each pass. The blade is shown as a standalone replacement part with a circular mounting hole for fitting to a compatible handle. Its dark metal surface and brushed finish keep the form easy to read on the bench, especially when following marked lines or working close to small components. The continuous row of fine teeth along one side is geared toward measured hand movement rather than fast rough cutting, which makes it useful for controlled material removal in model building, craft assembly and detail work. On the workbench, this blade suits jobs such as trimming sheet material, refining openings and separating delicate sections before sanding or final fitting. It also works well as a spare blade kept alongside other hobby tools, ready for precise hand cutting when a knife or larger saw is not the right match.
Model-making tools
Craft Tools Bending Tweezers for PE Parts
300074117€23.99
Craft Tools Bending Tweezers for PE Parts are made for the precise handling and shaping that photo-etched details demand. The stainless steel tool is designed for brass and nickel silver parts, with a slim 100 mm format that sits neatly in the hand while working over small model assemblies and etched fittings. Unlike general-purpose tweezers, this tool is built around the bending task itself. The tips are made as thin as possible so they can be positioned directly along a fold line before the metal is bent by hand. That close contact helps keep narrow tabs and fine edges aligned while forming crisp angles on delicate components. The tweezers can be used on fold lines up to 10 mm in length, which suits many of the small brackets, panels and detail sections found in photo-etched parts sets. For model builders working with finer metal additions, that focused geometry gives more control than a standard pickup tool. On the bench, the compact length supports careful work in tight spaces around unfinished assemblies, detail sprues and small subassemblies. The stainless steel construction also suits repeated use as part of a regular modelling tool set, whether shaping a single etched flap or preparing several metal details for a larger build. Warning! Not suitable for children under 14 years.
Model-making tools
Curved Scissors for Polycarbonate Hobby Trimming
300074005€19.49
These curved scissors are made for the precise trimming work that polycarbonate R/C car bodies demand. The stainless steel blades combine a slim profile with a curved cutting edge, giving clear access to shaped sections where flat tools can be awkward to position. Around wheel openings, roof edges and molded corners, the blade shape helps follow the line of the body with a steadier cutting path. The compact format suits close hand work on hobby benches, where small adjustments often matter as much as the main cut. The curved blade tip reaches into formed contours with less repositioning, which helps when refining openings after the main body shape is removed. Stainless steel construction gives the cutting edges a solid, workshop-ready feel for repeated use on polycarbonate shells and other detailed trimming tasks linked to model body preparation. Used during body finishing, these scissors support careful shaping before painting, mounting and final assembly. They fit naturally into R/C car build sessions where clean edges and controlled cuts help the bodyshell sit neatly and keep the finished outline crisp. Warning! Not suitable for children under 14 years.
Model-making tools
Curved Scissors, PC Body Tool, 12 mm Blade
300074151€31.49
These curved scissors are made for detailed trimming work on polycarbonate model bodies, where a clean line matters as much as the paint and decals that follow. The 12 mm blade size keeps the cutting area compact, making it easier to guide the edge through tight curves, narrow openings and shaped sections that appear around wheel arches, windows and cockpit cutouts. The curved blade profile changes how the tool meets the material. Instead of forcing a straight path through rounded shell sections, the cutting edge follows the contour more naturally, which helps reduce awkward hand repositioning during fine trimming. On thin polycarbonate sheets, that added control is useful when separating molded sections, refining body edges or cleaning up small areas after the first rough cut. The format suits bench work where precision matters more than reach. In a model building setup, these scissors slot in alongside knives, reamers and sanding tools as a dedicated option for curved cuts. They are especially useful during body preparation, when shell openings and perimeter lines need steady, repeatable shaping before mounting and finishing continue. Their focused 12 mm blade size keeps the tool aimed at detail work rather than broad sheet cutting.
Model-making tools
Cutting Mat α A4, hobby mat, 300 x 220 mm
300074149€15.99
The Cutting Mat α A4 brings a compact 300 x 220 mm work area to model benches where clean cuts, measured layouts and repeatable alignment matter. Its 2 mm thickness and translucent blue finish create a clear visual base for trimming sheet material, marking lines and setting small parts in place during close-up hobby work. The surface is printed with more than a standard grid. In addition to straight measurement guides, it carries R curves and dedicated lines for cutting masking tape, which helps when preparing paint masks or repeating narrow tape widths. The mat is made from low-odor olefin resin, a practical choice for indoor bench use where tools, parts and markings stay close at hand. A 3-layer structure places a hard inner core between softer outer layers, guiding the knife edge through repeated passes while helping reduce wear on blades. The printed markings serve as layout guides for cutting and positioning tasks across model and craft work. On a worktable beside a ruler, knife and small components, the A4 format fits neatly into limited space while still leaving room for measured cuts and angle checks. It suits routine bench tasks such as trimming masking material, sizing styrene pieces, marking curves and keeping small-scale hobby work organized in one defined area.
Model-making tools
Cutting Mat α A5, hobby cutting mat, blue
300074142€10.29
The Cutting Mat α A5 brings a compact 220 x 150 x 2 mm work surface to model making, craft cutting and bench preparation, with a translucent blue finish that stays easy to read under strong task lighting. Its A5 footprint suits smaller desks, side tables and portable tool setups where clean measuring and controlled knife work need to happen in a limited space. Across the printed face, the mat combines edge rulers with millimeter markings, a measurement grid, angle guides, circular references and a large protractor-style semicircle. Radius curves marked from R100 to R500 add a practical reference when shaping or checking rounded sections. The reverse side is plain, giving a second working face when a clear surface is preferred for layout tasks. The olefin resin material is described as low odor, which helps during longer indoor sessions focused on trimming parts, preparing paint masks or sizing sheet stock. On the bench, the printed tape-cutting lines support repeatable masking strips when a ruler and hobby knife are used together. The mat suits detail tasks such as measuring small components, setting cut angles and preparing curved templates before assembly or finishing work begins.
Model-making tools
Decal Scissors, model tool for precise trimming
300074031€24.49
These Decal Scissors bring fine control to 2 common model workshop jobs: trimming paper decals and cutting soft R/C racing rubber tires. The carbon steel construction and pointed blade shape support close, accurate cuts where larger scissors can feel clumsy, whether working around small printed markings or removing thin flash from molded tire edges. For decal work, the narrow tip helps separate intricate shapes from the sheet with less excess paper left around the design. For tire prep, the blades can trim molding flash from soft racing rubber and also support precise modifications when a track setup calls for a specific cut pattern. The compact format suits bench work where small movements matter, and the sharp cutting edge is intended for detail-focused handling rather than broad general-purpose cutting. To preserve the cutting edge, the scissors are intended for paper decals and should not be used on vinyl stickers. On a model bench, they fit naturally beside paint, tweezers and sanding tools during the finishing stage. At the track, they help clean tire edges or prepare a fresh set of rubber before setup changes, giving builders and racers a focused tool for neat, exact trimming work. Warning! Not suitable for children under 14 years.
Model-making tools
Decal Tweezers, hobby tool with angled tips
300074052€22.49
These decal tweezers are shaped for careful handling of both small and larger transfers, giving model work a more controlled touch where printed markings need exact placement. The angled tip makes it easier to approach surfaces at a clear working angle, whether positioning a narrow stripe along an edge or settling a larger graphic onto a curved section. The stainless steel body brings a slim, precise format suited to close bench work, while the tip geometry divides the task by size. Smaller decals can be picked up delicately at the pointed ends, where fine contact helps with detailed alignment on compact areas. Larger decals are supported lower down the tip, allowing a broader hold that helps keep the transfer flat while it is moved into place. This split handling approach is the key mechanism of the tool: the same tweezers use the point for fine markings and the lower tip area for wider pieces. On a model-building bench, that means one tool can move from tiny insignia to broader printed graphics without changing grip or reaching for a second pair. Used alongside water-slide markings during finishing work, the angled form helps maintain a clear view of the placement area while guiding the decal onto the target surface. Warning! Not suitable for children under 14 years.
Model-making tools
Design Knife Blade (30), replacement blades
300074074€5.69
Design Knife Blade (30) supplies a fresh cutting edge for detailed hobby work, with 30 replacement blades stored together in a plastic container for orderly handling between sessions. The blade shape suits fine trimming, scoring and close detail work where controlled cuts matter on small parts and precise outlines. As a replacement accessory for the Design Knife, this set focuses on keeping cutting performance consistent as edges wear through regular use. Swapping a worn blade promptly helps maintain a cleaner cut and steadier handling during modelmaking, craft preparation and careful finishing work. The compact storage case keeps the blades contained in one place on the bench and helps separate unused blades from loose tools and materials. On a build table, the set supports repeated detail tasks such as trimming film, refining edges or cutting small shapes with a sharper working edge available when needed. It also fits neatly into a regular hobby supply setup, where spare blades are kept ready for ongoing assembly, finishing and workshop use.
Model-making tools
Design Knife, hobby craft knife with 30 blades
300074020€12.99
The Design Knife brings fine control to trimming, scoring and detail cutting, with a sharp triangular blade mounted in a metal chuck and a black and gold handle shaped for steady hand work. Ridged and knurled grip areas support careful guidance when working along narrow edges, small openings or precise cut lines on model-making materials. The blade format suits close, deliberate cuts where a larger craft knife would feel less exact, and the metal chuck keeps the mounted blade aligned during detailed work. A set of 30 replacement blades extends the knife's working life across repeated bench sessions and keeps fresh cutting edges close at hand. Protective cap parts are also included for covered storage between uses. The visible Made in JAPAN marking identifies the origin stated on the tool itself. On a model bench, the knife supports clean trimming of parts, careful scoring before separation, and small corrective cuts during finishing work. It also fits general hobby and craft tasks that call for a narrow blade tip, controlled pressure and a compact handle that stays precise in the hand.
Model-making tools
Diamond File for Photo Etched, hobby file
300074066€11.29
The Diamond File for Photo Etched is a precision hobby tool made to refine thin metal details with more control than a standard file. Its diamond abrasive surface is suited to light carving on hard materials such as stainless metal, helping clean up edges on photo-etched parts while keeping the work focused and accurate. The slim profile and pointed working end also make the tool useful for narrow grooves, corners and other small sections that need careful finishing. A key advantage of this file is the way it moves across delicate etched metal. The surface files equally well in any direction, so shaping strokes can follow the angle of the part instead of forcing a single filing path. It is also designed not to snag on thin photo-etched sections, which matters when working with fine tabs, cut lines and small decorative details. The half-circle shape adds another practical benefit by reaching into curved or recessed areas that are awkward with flatter tools. On the bench, this file fits naturally into the finishing stage after parts are cut free and before bending or final placement. It helps remove flash, smooth contact points and tidy hard-to-reach areas on detailed model assemblies where a clean metal edge changes the final look. Warning! Not suitable for children under 14 years.
Other accessories
Display Case C, model display case, 1:20 and 1:24
300073008€21.99
Display Case C gives finished scale models a clean, defined setting with clear walls and a mirrored base insert that brings underside detail into view. Sized for 1:20 racing cars and 1:24 sports cars, it turns a completed build into a focused display piece rather than leaving it exposed on an open shelf. The case has inner dimensions of 247 x 133 x 92 mm, giving compact vehicle models a measured fit that suits low, wide body shapes often seen in racing and sports car subjects. Outer dimensions of 260 x 144 x 105 mm keep the overall footprint manageable for cabinets, desks or hobby rooms. The mirror sheet applied to the base adds a second viewing angle, so chassis parts, floor shaping and lower body contours remain visible without lifting the model. Placed in a collection cabinet, on a workbench or in a study, the case helps present a finished model with a more deliberate layout. It also suits display after painting, decaling and final assembly, when surface finish and stance deserve a clear, unobstructed view.
Other accessories
Display Case P, display case for 1:20 and 1:700
300073020€25.99
Display Case P gives finished scale builds a defined presentation with a clear acrylic cover and a black molded base. Sized for selected 1:20 car models and 1:700 Water Line Series subjects, it turns a completed build into a clean display piece while keeping the shape and finish fully visible. The acrylic upper section offers high transparency, so body lines, paintwork, deck structures and small markings remain easy to see through the cover. Inner dimensions of 287 x 132 x 93 mm provide the enclosed display space, while the outer dimensions of 299 x 145 x 106 mm help when planning shelf or cabinet placement. The product data also lists dimensions of 260 x 144 x 105 mm, but this measurement conflicts with the stated inner and outer sizes and is therefore not used here. On a desk, in a hobby room or inside a display cabinet, the case gives a finished model a clear boundary and a tidier presentation. It suits builders who want to keep a completed car or Water Line subject together in one covered space while leaving the details visible from the outside.
Model-making tools
E-Ring Tool 2 mm, model tool for tiny clips
300074032€11.29
The E-Ring Tool 2 mm is a dedicated hand tool for one of the fiddliest jobs in RC model building: fitting and removing tiny 2 mm E-rings. Its specially designed tip uses a unique shape to catch the clip securely, making small fastening work easier to control during construction and maintenance. Instead of relying on general-purpose pliers or improvised tools, this format focuses directly on the narrow opening and small contact area of 2 mm E-rings. The forked working end helps guide the clip onto its groove or lift it away again when a model needs servicing. That targeted shape is especially useful around compact assemblies where retaining clips sit close to moving parts and limited space makes precise handling more important. The slim tool body keeps the action close to the fingertips for careful placement. On the workbench, it suits repeated jobs such as drivetrain upkeep, suspension service or replacing worn parts that use small retaining clips. During a fresh build, it helps keep clip installation neat and controlled; during maintenance, it supports quicker removal when parts need to come apart for cleaning or replacement. Warning! Not suitable for children under 14 years.
Model-making tools
Engraving Blade Holder, craft tool, aluminum
300074139€18.99
The Engraving Blade Holder combines a slim pen-style form with a 126 mm length and 6 mm diameter, giving precise hand control for fine engraving, scribing and trimming work on model parts. Its lightweight aluminum body keeps handling nimble during careful passes along panel lines, edges and marked cutting paths. A knurled grip section supports steady finger placement, while the chuck in nickel-plated brass secures the blade in the holder. Blade insertion and removal follow a direct sequence: lightly pinch the chuck, rotate the handle to loosen it, place the blade, then tighten the handle again. This mechanism keeps blade changes straightforward when switching between different detailing tasks. The holder is compatible with Fine Engraving Blades 74135, 74136, 74137 and 74138, and also accepts the Design Knife Blade 74074. On the bench, the slim profile suits close, deliberate movements when refining grooves, extending panel lines or cutting precise shapes from sheet material. A protective cap is included to cover the tip in storage, and it can also be fitted to the end of the handle during use to help prevent the holder from rolling across the work surface. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Craft Knife, hobby knife, stainless steel
300074053€13.49
The Fine Craft Knife brings slim stainless steel construction and a segmented precision blade to detailed hobby cutting. Its pen-like shape and stepped slider make it easy to set a short extension for close trimming or a longer reach for straight cuts on paper, masking film and similar light materials at the workbench. The black sliding lock section secures the blade position once set, which helps keep handling consistent during careful edge work. Snap-off blade segments provide a practical way to renew the cutting edge when one section becomes worn, so fine lines and clean corners stay easier to manage over repeated sessions. The narrow metal body keeps the tool compact in storage and easy to place alongside rulers, cutting mats and other bench essentials. Visible blade markings indicate stainless steel construction, and the overall format is suited to model finishing, decal preparation and small craft adjustments where accuracy matters more than force. On a model bench, the knife supports tasks such as trimming masking shapes, cleaning excess material from edges and scoring thin sheet stock before separation. It also fits general craft use for neat, controlled cuts in projects that call for a light touch and a clearly guided blade path. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Craft Saw blade III, hobby saw set, 0.15 mm
300074105€11.29
Fine Craft Saw blade III is a hobby saw set for narrow, controlled cuts where a normal modeling saw would remove too much material. The etched metal blades are just 0.15 mm thick, so the cut stays fine and helps avoid unwanted changes to the length of small parts during model work. The sheet provides 4 blade formats for different cutting situations, with each profile shaped to suit a particular kind of access or cutting line. Fold-over grips let the blades mount onto a Modeler's Knife Item 74040 for a pen-like hold and close control during careful trimming. The metal sheet marking shows the blade variants as III-A, III-B, III-C and III-D, which helps keep the different shapes clearly organised before use. The visible SUS304 marking identifies the stainless steel material used for the etched blade sheet. This tool set suits detailed bench work such as adjusting fitted parts, opening narrow cuts, or separating small sections where accuracy matters more than cutting speed. In model building sessions with tight tolerances and delicate components, the slim blade profile supports cleaner planning before sanding, fitting, or final assembly.
Model-making tools
Fine Craft Saw Blades, scribing tool set 0.1 mm
300074097€11.79
This set of Fine Craft Saw blades is made for precise scribing and detail recovery in model work. The 0.1 mm stainless steel construction supports narrow cuts when seam cleanup has softened surrounding detail, and it also helps deepen existing panel lines with a controlled, fine kerf. On the etched sheet, 6 blades are arranged in 2 rows of 3, ready for careful removal and use at the bench. The blade selection combines straight profiles with rounded profiles, which gives more flexibility across flat sections, curved bodywork and tighter access points. Compared with Item 74094, these blades use smaller teeth and a finer pitch, which suits more delicate surface work where heavier cutting action would be too coarse. The material is stainless steel, and the thin profile keeps the cutting edge focused on light engraving and detail correction rather than broad removal. Fold the grips over and the saws can be used on their own for close hand control during panel restoration, trim work or fine surface adjustment. When a longer handle is preferred, the blades may also be fitted to Modeler's Knife Item 74040. At the workbench, that combination supports steady passes along engraved lines, corners and shaped sections on scale models.
Model-making tools
Fine Drill Bit 0.3 mm, model tool accessory
300074081€6.49
The Fine Drill Bit 0.3 mm brings exact sizing to delicate model-making tasks where a very small opening matters. With its 0.3 mm diameter, it supports careful drilling for fine detailing, subtle modifications and other close-control bench work on miniature parts. This single drill bit is suited to jobs that call for a narrower diameter than standard hobby bits can offer. It can be used to prepare tiny holes for detail placement, light pinning work or other precision steps during a build, while keeping material removal to a minimum. The compact accessory format makes it easy to keep alongside knives, files and other workshop essentials used in scale modelling. On the workbench, the 0.3 mm size is especially useful when a project needs measured, hand-led accuracy rather than a broader cut. It fits naturally into careful model assembly, detailing and finishing routines, whether the task involves refining a small component or preparing a precise point for the next build step. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Drill Set, hobby drill bit set, 0.3-0.8 mm
300074044€18.49
This Fine Drill Set brings 5 micro sizes together in one compact format, giving model and hobby work a precise way to open small holes from 0.3 mm up to 0.8 mm. The range covers 0.3, 0.4, 0.5, 0.6 and 0.8 mm, which helps when a build calls for closely stepped diameters rather than one broad jump between sizes. The slim metal bits are suited to detail-focused tasks where larger workshop drills would be too coarse. Small diameter changes matter when preparing openings for pins, wire, rods or other fine components, and this set keeps those increments close at hand. The spiral cutting sections are made for careful drilling on miniature parts, while the fold-open case stores each bit in its own place instead of letting the sizes mix loose on the bench. That layout also makes it easier to return each bit after use and pick the next diameter quickly. On a modelling desk, the set fits naturally beside cutters, files and sanding tools for bodywork, cockpit details, scratchbuilding or electronics-related hobby tasks. The compact case travels neatly to club meets or workshop sessions, and the grouped size selection supports steady, methodical progress when a project needs more than one hole diameter. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.15mm, modeling tool
300074145€33.49
The Fine Engraving Blade 0.15mm is a precision modeling tool for adding or sharpening engraved detail on plastic parts. Its tungsten carbide construction is designed for smooth, consistent scoring, making fine panel lines and custom surface work easier to control during advanced finishing tasks. The 0.15 mm blade thickness suits narrow engraved lines, while the 25 mm total length and 2 mm shank match dedicated tool setups for stable handling. Recommended compatibility includes the Engraving Blade Holder 74139, plus Fine Pin Vise D 74050 and D-R 74112. The working method is straightforward: hold the blade at a 45° to 60° angle, then pull lightly across the plastic surface and repeat as needed to deepen the line with a clearly defined result. A color mark on the shank helps identify the thickness quickly when several blade sizes are kept together. For bench work focused on panel lines, hatches, access covers or custom scribed detail, this blade supports careful, repeatable passes instead of heavy pressure. The included storage case holds up to 10 blades, keeping matching sizes close at hand during longer modeling sessions. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.1mm, hobby tool blade
300074135€33.99
The Fine Engraving Blade 0.1mm is a precision hobby tool blade for adding sharply defined surface detail to plastic models. Made from tungsten carbide, it is designed for advanced engraving work such as refining panel lines or cutting new fine grooves, with a slim 0.1 mm profile that supports exact, narrow scoring. The blade measures 25 mm in total length and uses a 2 mm shank diameter for use with dedicated holders and compatible pin vises. For operation, the blade is held at a 45 to 60 degree angle and pulled lightly across the surface, then passed again as needed to deepen the line gradually. This pull action helps create a cleaner result than forcing a deep cut in one pass. A color-coded marking on the shank identifies the blade thickness quickly when several sizes are kept on the bench. Each blade comes in a storage case that holds up to 10 blades, keeping replacements together between sessions. It suits careful detailing on body panels, access hatches and other recessed lines where a narrow, controlled cut gives the surface a more defined scale look. Recommended holders are available separately. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.25mm, hobby tool blade
300074162€32.99
The Fine Engraving Blade 0.25mm is a precision hobby tool blade for scoring narrow lines and sharply defined surface detail on model parts. Held at a 45 to 60 degree angle and pulled lightly across the surface, it cuts a controlled scribed line that can be deepened gradually with repeated passes. Its 25 mm total length and 2 mm shank diameter suit compact hand-tool setups where close control matters. A color-coded marking on the shank identifies the blade thickness quickly, which helps when several engraving sizes are kept on the bench for different line widths. The blade is recommended for use with the dedicated Engraving Blade Holder and is also compatible with Fine Pin Vise D and Fine Pin Vise D-R. One blade is supplied. The included case stores up to 10 blades, making it easier to keep replacements together and ready for the next detailing session. On aircraft, cars, armor or sci-fi subjects, the narrow 0.25 mm profile supports clean recessed lines, refined hatch outlines and sharper separation between adjacent surface sections.
Model-making tools
Fine Engraving Blade 0.2mm, craft tool blade
300074136€32.99
The Fine Engraving Blade 0.2mm is a precision craft tool blade for adding narrow engraved lines to plastic model surfaces. Made from tungsten carbide, it combines a very fine 0.2 mm blade thickness with a 25 mm overall length and a 2 mm shank, creating a compact format suited to controlled hand work on small details. This blade is used by inserting it into a compatible engraving blade holder or pin vise, then drawing it lightly across the surface in several passes to cut a clean groove. The documented use method focuses on a pull stroke rather than pushing down with force, which helps avoid raised edges, distortion, or blade bite in the material. A colour mark on the shank identifies the thickness, so this 0.2 mm version can be separated quickly from 0.1 mm, 0.3 mm, and 0.5 mm blades in the same range. An engraving blade holder is sold separately. On model parts, templates, and panel line work, the narrow profile supports crisp scribing where broader blades would remove too much material. The included case stores up to 10 blades, keeping spare and in-use blades together between work sessions. Protective goggles are recommended during use, as plastic shavings can form while engraving. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.3mm, hobby tool blade
300074137€32.99
The Fine Engraving Blade 0.3mm is a precision hobby tool blade for adding sharper panel lines and custom surface detail to scale models. Made from tungsten carbide, it is designed for smooth, consistent scoring when held at a 45 to 60 degree angle and drawn lightly across the surface in repeated passes. Its 25 mm total length and 2 mm shank diameter suit the dedicated Engraving Blade Holder and also fit Fine Pin Vise D and Fine Pin Vise D-R. The 0.3 mm thickness gives a defined line width for visible detail work without moving into broader cuts. A color-coded marking on the shank helps identify the blade thickness quickly when several sizes are kept together. Each blade comes in a storage case that holds up to 10 blades, keeping replacements and used blades organized between sessions. This blade suits advanced model finishing tasks such as deepening panel lines before paint, refining molded detail, or adding new engraved features to body shells and other model surfaces. Light repeated pulls across the material allow gradual control over depth and line definition, which is especially useful when working on visible exterior sections where clean edges matter. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.4mm, hobby tool
300074147€32.49
The Fine Engraving Blade 0.4mm is a precision hobby tool for adding sharper surface detail to plastic models. Its tungsten carbide construction is designed for engraving panel lines and custom scribed features with a smooth, consistent finish, giving shells, fuselages and body panels cleaner definition under paint and weathering. This blade measures 25 mm in total length and uses a 2 mm shank, a format intended for controlled detail work with compatible holders. Recommended use is with the dedicated Engraving Blade Holder 74139, and it is also compatible with Fine Pin Vise D 74050 and D-R 74112. For use, the blade is held at a 45 to 60 degree angle and pulled lightly across the surface to score it, with repeated light passes used to build a clearly defined line. A color-coded marking on the shank identifies the blade thickness quickly when several sizes are kept on the bench. The supplied case stores up to 10 blades, which helps keep matching sizes together between projects and supports a tidier setup for ongoing model detailing. This 0.4 mm version suits builders who want to emphasize existing lines or cut new recessed detail with a clearly controlled width. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.5mm, hobby tool blade
300074138€33.49
The Fine Engraving Blade 0.5mm is a precision hobby tool blade for adding sharper definition to model surfaces. Made from tungsten carbide, it is designed for engraving panel lines and cutting custom detail with a smooth, consistent finish that suits advanced model work. The 0.5 mm blade thickness gives a broader engraved line than finer variants in the same range, while the 25 mm total length and 2 mm shank diameter keep the format compact for controlled handling. It is recommended for use with the dedicated Engraving Blade Holder 74139 and is also compatible with Fine Pin Vise D 74050 and D-R 74112. The shank carries a color-coded marking so the thickness can be identified quickly when several blade sizes are kept together. Each blade comes in a storage case that can hold up to 10 blades. For use, the blade is held at a 45 to 60 degree angle and pulled lightly across the surface to score it. Repeated light passes help build a clearly defined line on plastic model parts, whether refining existing panel detail or adding new engraved features to a custom build. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Needle 20°, modeling tool
300074148€23.49
The Fine Engraving Needle 20° is a precision modeling tool for clean, controlled scribing on curved and straight surface details. Its pointed needle tip differs from the hooked profile used on engraving blades, so it can trace arcs, corners and fine panel lines with a lighter, more exact feel on model parts. Crafted from cemented carbide and finished to a precise standard, the needle combines a 25 mm total length with a 2 mm shank for stable mounting in compatible holders. The working method is simple and exact: insert the needle carefully, hold it at the shown angle, then pull it lightly across the surface in repeated passes to score a clearly defined line. This approach helps avoid rough edges that can come from forcing a single deep cut. The needle is recommended for the Engraving Blade Holder 74139 and is also compatible with Fine Pin Vise D 74050 and D-R 74112. On the workbench, it suits tasks such as emphasizing existing panel lines, adding new engraved detail and refining curved shapes on plastic model surfaces. A protective case is included for storage and can hold up to 10 needles as well as separately sold engraving blades, keeping small precision tools together between detailing sessions. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Fine Lapping Film #3000, polishing film, 3 sheets
300087144€9.99
Fine Lapping Film #3000 is a finishing supply for surface work on model parts, using polyester film coated evenly with fine abrasive particles to reduce blemishes and leave a smooth, consistent finish. The #3000 grade is suited to careful polishing stages where control matters, especially on clear parts, painted sections, and small areas that benefit from a flat, flexible sheet rather than a bulkier abrasive block. The uniformly coated surface helps maintain an even contact pattern during polishing, which is useful when refining plastic and metal components without concentrating abrasion in one spot. As a thin film format, each sheet is easy to position on narrow edges, curved sections, and detailed areas where precision matters. The material can also be used for wet sanding, adding another working method for controlled surface refinement during paint preparation or final finishing. With 3 sheets in the pack, the film fits neatly into repeated bench use, whether the task is cleaning up minor surface marks, improving clarity on transparent parts, or speeding up polishing on painted components. It suits hobby workflows that move step by step through preparation, correction, and final surface refinement. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Fine Lapping Film #8000, sanding film, 3 sheets
300087200€10.49
Fine Lapping Film #8000 brings an extra-fine abrasive step to paint finishing, helping model builders smooth rough surfaces, seams and joints before the final polish. The 3 pink sheets measure 93 x 228 mm each and offer a thin, flexible format that can be cut or handled to suit broad panels as well as smaller sections on scale builds. Each sheet is uniformly covered with fine abrasive particles, which supports an even contact pattern during sanding and helps avoid patchy results on painted areas. The #8000 grade is positioned as a pre-treatment for compound polishing, making it a useful stage when working toward a glossy surface finish. Wet sanding compatibility adds another practical option, especially when a controlled, refined surface correction is needed on delicate paintwork. On the workbench, the film suits finishing passes on body panels, cleanup around joints, and surface preparation before compound use. It fits naturally into model painting routines where a smoother base and a more consistent sheen matter across the final finish.
Model-making tools
Fine Pin Vise D, hand drill, 0.1-3.2 mm chuck
300074050€23.99
Fine Pin Vise D is a manual hand drill for model assembly tasks that call for clean, controlled holes in different diameters. Its chuck accepts drill bits from 0.1 mm to 3.2 mm, giving one compact tool the range to handle very small openings as well as larger pilot holes. The metal body, slim profile and precision tip suit close work on parts where powered drilling would be too aggressive. The long knurled handle gives the fingers a secure hold while the tool is turned by hand, and the hexagonal top cap provides a steady contact point for guided rotation. That layout helps when starting a hole exactly on a marked spot, opening mounting points, or adjusting fit on detailed assemblies. Because the drilling action is manual, the bit can be advanced gradually with close control over pressure and direction. This makes the tool useful for careful work on model parts, conversion tasks and other fine hobby jobs that depend on accuracy rather than speed. On the workbench, Fine Pin Vise D fits naturally alongside drill bits used for plastic kits, scratch-building and detail modification. It supports measured, step-by-step drilling where neat edges and exact placement matter most. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pin Vise D-R, hobby drill, 0.1-3.2 mm
300074112€24.49
The Fine Pin Vise D-R is a hand-held hobby drill made for precision hole work in scale model projects. Its 0.1 mm to 3.2 mm bit capacity covers delicate openings for fine detailing as well as broader drilling tasks used during model modification, giving steady manual control where small parts call for a lighter touch. The body is made from nickel-plated brass, combining a clean metallic finish with the weight and feel needed for accurate handling. An elastomer grip sits at the center to support a secure hold during slow, careful turns. At the rear, the rotating grip end uses built-in ball bearings, so the cap moves smoothly against the hand while the tool turns. This mechanism helps keep pressure consistent and the drilling motion controlled when working on narrow contact points or marked pilot positions. On the bench, the Fine Pin Vise D-R suits jobs such as opening mounting points, refining detail areas, or preparing parts for custom changes on scale models. The metallic sticker marked PIN VISE and the engraved rubber grip add clear workshop identity while the compact manual format stays focused on close, accurate work. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pin Vise, hand drill for 0.1-1.0 mm bits
300074051€14.79
The Fine Pin Vise brings measured hand control to drilling jobs that appear throughout model assembly, especially when small parts need a clean opening without the force of a powered tool. Its 0.1 mm to 1.0 mm bit range suits very fine work, from starting pilot holes to opening marked points in miniature components. The tool uses a compact metal construction with a black body, a textured center section and a silver front chuck. The knurled grip improves purchase during slow rotation by hand, while the chuck is shaped to hold micro drill bits used in detailed hobby tasks. A hexagonal swivel cap at the rear provides a firm resting point, allowing steady forward pressure while the fingers turn the body. This layout supports careful alignment when working on narrow surfaces, small panels or parts that need exact placement. On the bench, the Fine Pin Vise fits the rhythm of precise build work such as preparing openings before fitting detail parts or refining holes after test placement. It also suits craft and miniature projects where a hand-driven tool gives closer feedback than a motorized drill. Batteries are not required.
Model-making tools
Fine Pivot Bit 0.2mm, drill bit, 1mm shank
300074113€7.99
The Fine Pivot Bit 0.2mm Shank 1mm is built for precise hole drilling in small-scale model work, where a very fine cutting diameter and steady handling are essential. Its 0.2 mm bit size targets delicate drilling tasks, while the 1 mm shank gives the tool a secure fit in compatible hand vises. The pivot drill bit design uses a bit section that is thinner than the shank. This construction helps reduce deviation at the drilling point and supports more accurate placement when working on fine parts. The material is described as shatter-resistant, giving the bit added resilience during careful manual drilling. A high-quality bit finish further supports clean results, especially when accuracy matters more than speed. This bit suits detailed workshop tasks such as opening tiny guide holes, refining model components or preparing parts that need exact alignment. It is compatible with the 74050 Pin Vise D, 74051 Pin Vise S and 74112 Pin Vise D-R, fitting neatly into established hand-tool setups for controlled hobby work.
Model making accessories – make your hobby even more fun!
In addition to patience, know-how and model making skills, you’ll also need a set of tools in order to get the most out of your model. When it comes to model making, every little detail needs to be implemented with perfection – something which is only possible with the right model making accessories.
Finding the right model making accessories
The model making accessories you will need will depend on your own expectations and aims, as well as the model you are working on. There are many different options – from glues and sanding materials for assembly to paints, brushes, masking tapes and decorations for creating your own unique and individual designs, we have everything you’ll need for your model-making projects.
Overview of Tamiya model making accessories
If you’re an experienced model maker, you’ll know how important it is to have a set of premium model making accessories. With our extensive range, we have everything that you need to make your creative spirit run wild:
Model-making tools
A set of functional and practical accessories is indispensable for model making enthusiasts. Accessories include tweezers, pincers and scissors, drill bits, files, blades, engraving tools and cleaning utensils. If you’re looking to get kitted out with the right tools, take a look at our model-making tools in our online store, where you can choose from a wide range of premium products.
Model-making glues
Glues play a crucial role in model making – in addition to being easy to handle, they must also provide a strong and reliable bond. Our range of model-making glues contains numerous different glues and adhesives for specific materials (e.g. plastic) to ensure that your model stands the test of time.
Model-making masking tapes
If you want to paint your model, masking tape is a must. These strips of adhesive tape help to ensure a clean coat of paint and allow you to work with precision. Our selection of model-making masking tapes contains a range of strong and wide tapes, including tapes which are suitable for working on curves and round shapes.
Model-making abrasive materials
For many models, sanding is an essential part of the assembly process. Our range of model-making abrasive materials includes an extensive selection of high-quality sanding paper, sanding sponges and other sanding accessories – all at reasonable prices.
Other model making accessories
In the Other accessories category, you will find a diverse range of other practical accessories such as plastic plates, beams and cotton swabs (industrial quality with tightly spun tips).
Model making accessories – create your very own masterpieces!
Whether you’re looking for high-performance glue, sanding materials or practical tools, we have everything you need to create your own masterpieces – all with uncompromising quality and performance. Check out our model making accessories and get inspired.