Basic RC truck accessories
Find essential accessories for your RC truck adventures and equip your model perfectly! From practical axle frames to stickers: everything you need to keep your RC truck in top shape and ready for any challenge.
Basic RC truck accessories
Find essential accessories for your RC truck adventures and equip your model perfectly! From practical axle frames to stickers: everything you need to keep your RC truck in top shape and ready for any challenge.
More
Basic accessories
1:14 Drivercabine for 56314, body shell
309335393€47.99
This 1:14 driver cab body shell is made for model 56314 and gives truck builders a dedicated replacement or build component for the upper exterior section. Formed as a single white cab piece, it presents the main outer surfaces in one unified shape, making it suitable for restoration work, parts replacement or a fresh custom finish. The shell arrives unpainted, which keeps the surface ready for sanding, priming and paint application according to the chosen livery. Moulded contours define the hood, side sections and roof panel, while the cutout areas for the windshield, side windows, door opening and roof opening establish the cab layout before further detailing begins. As a standalone exterior component, it is suited to projects where the original cab needs replacement or where a separate body section is required for a specific build stage. On the bench, the formed openings and panel structure help guide alignment with the matching model during test fitting and finishing. In a workshop setup focused on scale trucks, this cab shell can serve as the basis for repainting, repair work or a second body prepared in a different scheme. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Drivercabine Parts Bag, cab component
319335808€68.99
This 1:14 Drivercabine Parts Bag supplies a replacement cab shell for model truck work where the upper body section needs to be renewed, repaired or prepared for a fresh build stage. The white moulded cab brings the exterior form back into place with shaped front contours, side walls and a roof section that establishes the vehicle's visible structure. The shell is presented unpainted, which leaves the surface open for custom colour application and project-specific finishing. Moulded recesses and panel detailing give the part a defined appearance before further components are added. Multiple holes and fixing points are built into the cab section to support attachment during assembly, while the roof opening with its cross-shaped support shows the part's prepared construction. As a dedicated cab component, it suits workshop use where an existing model needs a fresh body section rather than a complete new kit. On the bench, the part fits naturally into repair, restoration and parts-replacement tasks for 1:14 scale truck modelling. It can also serve as a spare kept ready for ongoing maintenance projects, repaint work or the staged completion of a matching vehicle build.
Basic accessories
1:14 Ford Aeromax driver cab body, model part
300335157€50.99
This 1:14 Ford Aeromax driver cab body brings the distinctive long-hood truck silhouette into a model build with a molded shell that is ready for fitting, finishing and individual detailing. The white body part shows the full cab form clearly, from the front hood line to the roof and side sections, creating a strong visual base for a scale truck project. The shell is shaped with window apertures, roof cutouts and mounting holes already formed into the molding, so the main structure is defined before paint and trim work begin. Side panel lines add surface detail that helps the cab read convincingly once assembled on a matching chassis. The molded construction also leaves room for different finishing approaches, whether the goal is a clean road truck look, a working fleet style or a more custom presentation. As a dedicated body component, it suits restoration of an existing build as well as replacement during a rebuild. On the bench, the shell supports careful test fitting, painting and detail work around the cab openings and body lines. In a completed 1:14 truck model, the Ford Aeromax form gives the vehicle a recognisable road-going character that stands out in display settings and scale transport scenes. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Globe Liner driver cab, model body shell
309335165€54.99
This 1:14 Globe Liner driver cab body shell is a dedicated replacement body part for the 56304 truck platform. The cab section restores the distinctive upper structure of the Globe Liner and gives repair, refurbishment or continuation builds the correct visual base for a matching road truck model. As a separate body component, the shell is suited to projects where the original cab has been damaged, worn or set aside for a new finish. The 1:14 scale keeps the proportions aligned with the corresponding truck format, while the cab-focused design concentrates on the part that defines the model's road-going character. For workshop use, this kind of replacement part helps maintain continuity across long-running builds and supports careful upkeep of an established truck collection. On the bench, the body shell can be prepared for fitting and finishing as part of a restoration or spare-parts plan. It also suits modelers who keep key exterior components ready for future repairs, so an existing 56304 truck can return to a complete Globe Liner appearance with the correct cab section in place. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 King Hauler Drivercabine, body shell
300335129€53.99
The 1:14 King Hauler Drivercabine body shell brings the unmistakable outline of a classic truck cab into a scale build, with a boxy front section, shaped front fenders and a large rear box compartment formed in one exterior piece. The unpainted white shell gives custom projects a clean starting point for color, trim and surface detailing. Openings for the 2 front windshields, side windows, roof section and light or accessory fitment are already defined in the molding, which helps guide finishing and installation work. The surface carries molded door lines, panel breaks and rivet-style details that stand out once paint, lining or weathering is applied. The rear section adds utility box door contours and rounded upper edges, giving the body more visual depth than a plain smooth shell. As a replacement body for 56301, it suits rebuilds where the exterior needs a fresh cab structure rather than a full new truck. On the bench, the shell supports careful masking, painting and detail picking with a clear set of molded reference lines. In a completed 1:14 display or RC truck project, the defined cab shape and rear body contours give the model a purposeful road-going presence. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 M-B Actros Drivercabine, model cab shell
319335685€53.99
This 1:14 Drivercabine M-B Actros is a replacement cab shell for scale truck builds that need the correct outer front structure again. The white molded body captures the main cab form with a large windshield opening, side window apertures and defined exterior lines that give repainting or restoration work a clean starting point. The shell is shown as an unassembled body component rather than a complete truck, so the focus stays on fit, shape and finishing potential. A large roof opening with cross braces is molded into the upper section, adding another distinct structural area for builders working on a faithful rebuild. Small mounting holes and formed attachment points are already present in the shell, which helps when matching the part to an existing compatible assembly. The side wall cutouts and front lower section continue the cab geometry and keep the overall silhouette consistent with the stated Actros designation. On the bench, the cab shell suits repair projects, replacement of worn bodywork or a fresh paint scheme on a scale lorry. In a display build, the crisp molded surfaces provide a clear base for glazing, trim details and exterior colour work that brings the truck cab back into a complete road-going look.
Basic accessories
1:14 M-B Arocs 3363 Drivercabine, model part
319335774€45.99
This 1:14 Drivercabine M-B Arocs 3363 is a dedicated model part for the Tamiya truck platform referenced as 56352. It focuses on the cab section that defines the front profile of the M-B Arocs 3363, making it a useful choice when an existing build needs the correct upper body section restored or replaced. The designation links this part directly to the matching truck version, which helps keep repair and rebuild work aligned with the intended model rather than relying on generic body components. In workshop use, a cab-specific replacement can help return a display truck or running build to a more complete appearance after wear, damage or a body refresh. The 1:14 scale keeps it consistent with the corresponding truck format, and the Drivercabine naming makes its role within the overall vehicle structure clear. It fits naturally into spare-parts storage, planned rebuilds and detail-focused maintenance sessions where the cab area is the section being renewed. For collectors and truck model builders working on the 56352 platform, this part supports accurate continuation of the original Arocs configuration.
Basic accessories
1:14 MAN TGX XLX, driver cab, for 56325
319335565€44.99
This 1:14 driver cab is made for the MAN TGX XLX 56325 truck model and supplies the key upper body section in a single dedicated part. The included contents are 1 cab, giving the build the correct front and roof structure for repair, replacement or restoration work on the specified model. Used on the designated 56325 platform, the cab restores the truck's recognizable MAN TGX XLX silhouette and brings the bodywork back into line after damage, wear or incomplete storage. The scale format keeps the part aligned with a 1:14 truck build, which matters when matching exterior proportions across the chassis and body sections. Because this is a model-specific cab rather than a universal body component, the fit and visual result stay tied to the named reference instead of relying on adaptation. On the workbench, this cab suits rebuilds of a previously run truck, completion of an unfinished project, or replacement during a visual overhaul. It also serves display-focused maintenance where the upper body shape defines the finished look of the assembled MAN TGX XLX model. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Mercedes-Benz Actros 3363 Sticker Set
319495885€26.99
This sticker set is made for the 1:14 Mercedes-Benz Actros 3363 6x4 Gigaspace RC truck and brings the finishing layer that turns painted bodywork into a recognisable scale replica. Long black stripe decals, grey trim sections and a large panel marking give the cab and body sections the printed accents seen on the full-size vehicle, creating a cleaner and more complete final appearance. The sheet also reaches into smaller areas that shape the overall realism of the build. Dashboard graphics, instrument clusters, switch panels, vent details and console markings add printed definition inside the cab, where plain moulded surfaces gain a more technical look. Multiple licence plate decals marked S-MB3363 are included alongside country identifiers and alphanumeric markings, allowing the model to carry road-style details across front and rear positions. Brand and model graphics such as Actros, Mercedes-Benz, Truck of the Year and BLUETEC markings support accurate badging across the exterior. Reflective warning panels, red triangular reflectors, ON and OFF labels, and caution markings for motor heat and rotating parts extend the sheet to functional-looking zones around the truck. Applied during the finishing stage, these printed elements help tie together cab, trim and mechanical areas so the completed model reads with more scale-specific character on the shelf or on the road. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Scania Drivercabine, model body for 56318
309335474€47.99
This 1:14 Scania drivercabine body is a dedicated replacement cab for the 56318 truck model, bringing the correct upper structure back to a build that needs a fresh shell. The focused format makes it useful for restoration benches, repaint work and repairs where the original cab has been damaged or worn through regular handling. As a separate body component, the drivercabine can be kept in reserve for maintenance cycles or used as the starting point for a new exterior finish on an existing 1:14 truck platform. The Scania form gives the model its recognizable road-going presence, while the spare-body role keeps the work centered on the visible cab section rather than a full rebuild. For collectors and builders maintaining a fleet, a dedicated replacement shell helps preserve the intended appearance of the 56318 configuration. On the workbench, this cab body fits naturally into repair, repaint and refurbishment tasks where the upper truck section needs to be renewed. It also suits long-term parts storage for larger scale truck models, ready for the moment a running or display build calls for a correct Scania cab replacement. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Warning-Sticker Set Tractor/Trailer, decal set
300056534€20.99
The 1:14 Warning-Sticker Set Tractor/Trailer brings full-size freight detail to scale truck builds with a broad sheet of markings for cab and trailer surfaces. European truck-style graphics, service labels and route identifiers give a model the visual language of commercial transport, whether the goal is a clean road hauler, a tanker-style layout or a more heavily marked working rig. Alongside warning panels and speed limit signs, the sheet provides national identification marks plus separate letters and numbers for custom numbering and vehicle-specific combinations. This opens up more than one fixed look: trailer sides, rear panels, fuel areas and service points can be arranged with different label groupings to match the chosen theme. The mix of operational notices and identification graphics helps smaller scale details read clearly once applied, especially on larger 1:14 truck bodies where open panel space benefits from realistic markings. The set is usable with any 1:14 scale tractor truck body, making it a practical choice for new assemblies and for updating an existing cab or trailer with fresh graphics. On the bench, the sheet supports careful finishing work; on a completed display or running model, the added signs, codes and warnings give the truck a more convincing long-haul presence. Warning! Not suitable for children under 14 years.
Basic accessories
3-Axle Frame L/R, model spare part for trucks
304005128€48.99
The 3-Axle Frame L/R is a dedicated spare part set for Scania R620 and MAN TGX model trucks, supplying 2 matching black metal side rails for the chassis structure. Each rail has a long, straight profile with bent side flanges and a series of round mounting holes, giving the frame section the correct base for replacement or repair work. The left and right rails are shaped as a mirrored pair, which suits their role as side members in a truck chassis layout. The hole pattern runs along the length of each piece in several sizes, allowing attachment points for adjoining components where the original frame section needs to be restored. The metal construction adds the rigid, hardware-like character expected from a structural chassis part, while the narrow channel form helps the rails sit as defined frame elements rather than flat strips. The image data shows a clean black finish that matches the technical look of scale truck running gear. This set fits projects centered on Scania R620 or MAN TGX model truck maintenance, rebuilds, or parts replacement. It suits workshop tasks where a worn, missing, or damaged frame section needs the correct left and right rail format to bring the chassis back into working order. Warning! Not suitable for children under 14 years.
Basic accessories
A-Parts A1-A33 Tools, model parts for 56014
300005837€9.79
This spare parts frame is made for the M4 Sherman 56014 kit and provides the A-Parts A1 to A33 set in 1 molded runner with 40 pieces. The layout follows the named A-section structure from the original kit, which helps keep a rebuild, repair or parts replacement consistent with the intended assembly sequence. The connected sprue format keeps the individual components organized until removal, which supports careful trimming, checking and placement at the workbench. Visible elements on the frame include exterior fittings and tool-shaped components that suit military vehicle detailing, along with larger structural sections and smaller attachment points. Because the set is specified as A-Parts for 56014, it serves as a direct match when original pieces are missing, damaged or needed again during a restoration project. On the bench, the frame suits methodical sorting before assembly and gives model builders a clear reference for locating each numbered section. It also fits repair work on an already started M4 Sherman build, where a single replacement runner can restore continuity without replacing the full kit. Warning! Not suitable for children under 14 years.
Basic accessories
AA-Parts Bag 56360, model parts set, 1:24
319004976€12.49
AA-Parts Bag 56360 provides a focused source of 1:24 replacement components for model work that needs matching molded sections rather than improvised substitutes. The silver gray sprue presents the parts in a clear rectangular layout, making it easy to identify each section before cutting and fitting them into place. Visible on the runner are 2 large curved body shell panels, several long narrow side or trim pieces, 2 seat-like parts, 4 round disc elements and a range of smaller rectangular detail sections. This mix supports repair and restoration jobs across exterior and interior areas while keeping the molded finish consistent from part to part. Because the components remain attached to the frame before use, sorting and checking the needed sections can happen before any piece is removed. The molded 1:24 marking on the sprue gives a direct scale reference for matching work. On the bench, this set fits projects where an original section is missing, damaged or incomplete and a like-for-like molded replacement is needed. It also suits careful stock replenishment for ongoing model maintenance, where having the right shell, trim or detail section ready can keep a build moving without compromise.
Basic accessories
Aeromax Grille P-Parts, model accessory, chrome
300115234€28.49
This Aeromax grille P-Parts set is a model accessory made for 56309 and focuses on the bright front-end details that shape the finished truck's character. The chrome-plated frame holds multiple molded pieces, including large curved grille elements and smaller matching trim components, so the reflective finish stays visually consistent across the fitted sections. The parts arrive attached to a single sprue, which helps keep the individual components organised during the build or during replacement work on an existing model. Patterned panels, narrow bars and smaller mounting-style pieces add further surface definition where the Aeromax design calls for crisp metallic accents. The molded contours and plated finish bring out edges, openings and decorative shapes that can otherwise look flatter in uncoated form. This set suits repair work on 56309, completion of an unfinished build, or the replacement of worn grille sections after handling and display. On the bench, the grouped layout makes it easier to identify each section before cutting and fitting. Once installed, the chrome details give the front area of the Aeromax model a sharper, more finished presence that matches the style of a highway truck build. Warning! Not suitable for children under 14 years.
Basic accessories
Air Intake M-B Arocs, model parts set, black
319225180€19.99
This air intake parts set for the M-B Arocs supports repair, replacement and detail work on an existing model build. The black injection-moulded runner carries multiple shaped components in one matched frame, giving rebuild projects a consistent finish across visible exterior sections. The sprue layout shows vented grille-style panels, curved housing pieces, bracket and mount elements, circular collar parts and 2 larger tubular intake sections with ribbed shaping. That mix helps cover both prominent body details and the smaller connection points that support a tidy installation. Keeping the parts attached to the runner until use also helps with identification during workshop preparation and staged assembly. The moulded black finish suits applications where matching colour and surface appearance matter during restoration work. On the bench, the set fits naturally into maintenance tasks such as replacing damaged intake details, refreshing a used truck body or completing a project that is missing original components. It also serves as a practical reserve for long-term model upkeep, where having the correct shaped parts ready can keep a build visually complete and mechanically tidy. Warning! Not suitable for children under 14 years.
Basic accessories
Battery Mount Scania 56371, model spare part
319115568€29.99
This battery mount is an SS Parts replacement for Scania 56371 and serves one clear task within the model: holding the battery in its intended position. As a dedicated spare part, it supports accurate maintenance work when the original mount is missing, worn or damaged. The part is identified in the source data as Battery Mount Scania 56371, which makes it a direct match for servicing that specific model reference rather than a general-purpose accessory. Using the correct replacement part helps keep repair work focused on the affected area and avoids changing larger assemblies when only one mounting component needs attention. That makes it useful for routine upkeep, restoration projects and workshop stock where exact model-specific parts matter. In practical use, this spare part fits naturally into repair sessions, rebuilds after wear, or planned maintenance on Scania 56371. It also suits collectors and builders who keep selected replacement components on hand for future servicing of the same model.
Basic accessories
BB Parts Clear Side skirt S770, model parts set
319007361€8.19
BB Parts Clear Side skirt S770 is a model parts set built around clear molded body-detail components for a matching S770 assembly. The translucent sprue format keeps the parts connected and visible at a glance, so the layout can be checked before any section is removed for fitting. The frame carries numbered groups from 1 to 5, including 4 smaller rectangular inserts on the left and 4 longer curved side elements on the right. This arrangement helps separate the different shapes by function during the build and supports more accurate placement when the body details are added. The molded runner structure keeps each section organized until use, which is especially useful when several similar pieces need to be handled in sequence. The clear material also suits builds where body trim, side detailing or transparent styling parts need a defined finish rather than an opaque look. On the bench, the set works as a focused source for replacement parts, repair work or a fresh body-detail stage within an ongoing model project. The compact sprue layout also makes it practical to inspect, trim and prepare each section in order before the final body assembly continues. Warning! Not suitable for children under 14 years.
Basic accessories
Bevel Gear Shaft, spare part for model 56313
309804180€6.69
This spare part set provides 2 bevel gear shafts for model 56313 and focuses on a precise mechanical role inside a driven assembly. Each piece combines a silver conical gear head with multiple teeth, a circular flange and a short dark shaft with a square drive end, forming a compact component for angled gear engagement. The bevel gear shape indicates use where rotational force changes direction through meshing gear faces rather than a straight spur gear path. The flange supports defined positioning of the part within the surrounding mechanism, while the square shaft end points to a positive drive connection with the matching receiving component. The metal construction shown in the part image suits a technical replacement task where tooth form and shaft geometry matter for correct operation. As a 2-piece set, the pack supplies a matched pair for maintenance or repair on the specified 56313 model. This kind of replacement part fits workshop sessions centered on restoring a drivetrain, gearbox or axle section after wear or damage. It also suits planned servicing when a model is being inspected, rebuilt or returned to running condition with the correct dedicated hardware for the named application. Warning! Not suitable for children under 14 years.
Basic accessories
C Parts Chassis Parts, RC spare parts set
319008208€11.79
C Parts Chassis Parts brings together a focused selection of molded chassis components for Tamiya model vehicle maintenance and rebuild work. The set is supplied as black injection-molded parts on a sprue, a format that keeps small sections connected and easy to sort before they are clipped free for installation. The visible component mix covers several mechanical shapes used around a chassis assembly, including bracket forms, rounded housings, linkage-style pieces and mounting sections. That variety matters when a repair calls for matching geometry rather than a generic substitute, especially where moving assemblies and fixed mounting points meet. The black molded finish gives the set a consistent look alongside existing chassis sections. Because the parts remain grouped on the runner, each piece can be checked against the build step or repair task before removal, which helps keep workshop handling tidy. This spare parts set suits bench repairs, partial rebuilds and the replacement of worn or damaged chassis sections after regular RC use. It also works as a practical stock piece for hobby setups that keep key maintenance parts ready between running sessions and workshop servicing. Warning! Not suitable for children under 14 years.
Basic accessories
C-Parts Crossmember 56323, model spare part
309005933€13.49
C-Parts Crossmember 56323 is a model spare part shaped for structural use within a vehicle assembly. The black molded piece shows a defined crossmember form with multiple circular mounting holes, recessed screw seats and raised posts that help place matching hardware and adjoining sections in the intended positions. The part is presented in front and rear view, making the geometry easy to identify against an existing build before installation. Triangular side bracing and the central bridge layout indicate a load-bearing role within the assembly, where stable connection points matter for chassis-related fit. The visible numbering and molded marking on the sprue section support part recognition when comparing replacement components during workshop sorting or rebuild planning. As a dedicated spare part, it suits repair work, restoration of an older model, or replacement of a worn or missing frame section. Used during maintenance or reassembly, the crossmember helps return a model vehicle to its intended structure by restoring key screw locations and connection geometry. It also serves as a practical reference piece when checking orientation, hole spacing and mounting position against the surrounding assembly. Warning! Not suitable for children under 14 years.
Basic accessories
C-Parts Steering Mounting Set, model spare parts
300005564€27.49
This C-Parts steering and mounting set brings together molded replacement pieces for 2 axle truck assemblies in one clearly organized sprue. The black and metallic silver components are arranged on the runner for straightforward visual reference, making it easier to identify the needed section before removal and installation. The set is described as C-Parts for steering and mounting points, with multiple numbered references visible on the sprue from 4 to 19. Larger frame-like sections sit alongside smaller brackets, linkage-style parts, bushings, spacers, clamps and ring washers, giving the set a technical layout that supports instruction matching and targeted replacement work. The molded runner also carries the C identifier and TAMIYA marking, which helps confirm the correct parts group during workshop sorting. As a spare-parts supply in the Models & Accessories range, it fits practical bench use where worn, missing or damaged molded sections need to be replaced with matching components. On the workbench, the organized sprue format helps keep small pieces together until the required section is selected for the repair. For ongoing truck maintenance, this set supports clean parts identification, orderly storage and accurate preparation before assembly steps begin.
Basic accessories
Cabin Interior L Parts, model accessory for Actros
319115369€20.49
This cabin interior L parts set is a model accessory for the M-B Actros 56335 and focuses on the details that define the inside of the cab. The white molded sprue carries a dashboard, 2 front seats, a steering wheel, long trim elements and smaller control parts that support a more complete interior during assembly. The runner layout keeps each component attached and easy to identify before cutting and fitting. A rear interior panel and narrow side pieces with round mounting holes add further structure to the cabin area, while the smaller lever-like parts extend the control detail beyond the main dashboard and seating. Because the set concentrates on the cab rather than the body shell, it suits builds where internal features remain visible through the windows or open access points. On the workbench, the parts support a focused detailing stage that can change how the finished truck cab reads at close range. Painted and installed to match the chosen build, the interior pieces help create a more convincing driving environment for display, photography or a restoration of the original M-B Actros 56335 configuration. Warning! Not suitable for children under 14 years.
Basic accessories
Cabin Sidepanel S770, model spare part set
319115548€16.79
This spare part set centers on the cabin bodywork for the S770 and provides shaped replacement sections for model repair, restoration or continued assembly. Large side walls with window openings and curved contours define the cabin form, while separate narrow strips and mirrored sections support a clean fit across the body shell. The white molded pieces are supplied on sprues, so each section stays clearly separated until trimming begins. Visible numbering on the frame, including positions such as 2, 3, 4 and 6, helps identify the correct parts before fitting. Wheel-arch cutouts and long side elements point to use on a truck-style or van-style cabin structure, where panel shape matters for matching the original body lines. The unpainted finish also leaves room for sanding, priming and colour matching when replacing worn or damaged exterior sections. On the bench, this set suits careful rebuilds where a cabin side has been marked, broken or lost. It also supports ongoing projects that need fresh body panels before final paint and detail work, keeping the exterior layout consistent across the assembled model. Warning! Not suitable for children under 14 years.
Basic accessories
CC Parts Clear Taillights S770, model accessory
319007362€7.39
CC Parts Clear Taillights S770 focuses on one of the small details that gives a scale build a more finished rear view. The set provides molded taillight components for the S770, making it useful for replacement work, restoration projects or a fresh body finish where the rear light area needs clean, defined parts. The parts arrive on a red sprue frame, which keeps each section organized before removal and helps identify the molded shapes during assembly. The visible material marking indicates PSPS, giving a concrete reference for the composition of the frame and parts. This kind of accessory suits builders who refine body details step by step rather than leaving rear sections plain or incomplete. It can support a tidier result on a rebuild, a repair, or a body shell that is being finished with renewed exterior trim. On the bench, the set fits naturally into careful model preparation, whether replacing missing light pieces or completing a body with sharper rear detailing. In a display setting, the taillight area gains clearer visual definition that helps the finished model read more convincingly from the back. Warning! Not suitable for children under 14 years.
Basic accessories
CC-Parts Bag CC, model parts set, chrome finish
319004946€14.49
CC-Parts Bag CC brings a single chrome-colored sprue into model work where matching plated details matter. The rectangular frame holds multiple small mirrored components together in one set, giving builders a clear starting point for replacing missing sections or completing a specified assembly stage with the correct finish. The molded parts are presented as CC-Parts Bag CC x1 and correspond to reference 56360 in the supplied data. The chrome-colored surface creates a reflective metallic appearance that suits trim and accent areas where a plain molded finish would look different from the surrounding section. Because the pieces remain attached to the sprue before removal, each component can be checked in place and separated only when the build reaches that step. This format also helps keep small parts grouped during bench work and parts sorting. The set fits naturally into repair tasks, restoration of an earlier build, or a fresh assembly that calls for this exact frame. On the work surface, the mirrored finish stands out clearly against tools and cutting mats, helping visual checks before fitting and placement. This is a focused replacement and supply component for model building rather than a complete kit.
Basic accessories
Chassis LR Set, model spare part, shrink packed
314305672€63.99
The Chassis LR Set is a model spare part shaped as a long, slim black metal rail with a straight profile and a series of pre-drilled holes. That layout supports accurate positioning inside a compatible chassis assembly, where a replacement strip needs defined fixing points and a rigid linear form. Its narrow rectangular shape suits structural use rather than decoration, making it relevant for repair, maintenance, or restoring an existing build to working order. The dark metallic finish and perforated construction indicate a part designed to be fastened into place with matching hardware from the compatible model system. Because the holes are distributed along the length of the rail, the strip can align with established mounting positions in the chassis area instead of relying on improvised drilling or reshaping. Shrink-packed supply keeps the part contained in storage among workshop spares until it is needed for a rebuild or replacement job. This kind of chassis component fits naturally into bench work where worn, bent, or missing structural parts need to be exchanged with a matching replacement. It also suits planned maintenance on a model that is being stripped down, checked, and reassembled with fresh chassis hardware.
Basic accessories
Chrome Parts Set, model accessory sprue, black
310115874€19.49
This chrome-plated parts sprue adds bright exterior detailing to a scale truck build, with a reflective finish that gives the front section and side accents a more defined, realistic look once the pieces are fitted in place. The runner layout keeps the plated components grouped together, making it easier to identify each section before removal and assembly. The visible set centers on a large front grille with a diagonal bar and emblem area, supported by 2 large headlight assemblies, smaller lamp units and further trim pieces. Mirror or marker-style parts and side grille or trim panels broaden the plated treatment across more than one area of the body, so the finish does not stop at the nose. Because the parts are supplied unassembled on a single rectangular sprue, the layout also helps with part checking during a careful hobby build. The black base specification in the source data distinguishes this version from other finish variants. On the bench, the plated runner suits builders replacing worn trim, completing a detailed truck body or refining the visual contrast of a custom project. Once installed, the bright accents work especially well on display builds where grille depth, lamp framing and small exterior highlights are meant to stand out at close range. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Glass Panes S Parts for Model Assembly
319115552€13.79
S Parts Clear glass panes 770S adds a dedicated transparent pane set to compatible model assembly work, with molded glazing sections supplied together on a sprue for organized handling at the bench. The set is shown as 6 numbered parts, which helps separate each insert by position before removal and fitting into the body structure. The visible pane shapes include 2 matching curved sections, 1 rounded rectangular insert, 2 angled rectangular panels with cutouts, and 1 taller rectangular panel. This mix supports model areas that need different window outlines rather than a single repeated shape. The transparent molding keeps the focus on visible glazing detail once the compatible build is assembled. Numbering on the sprue also helps track each section during trimming, test fitting, and placement, especially when several openings sit close together on the same body shell. On the workbench, this kind of parts set suits repair of a used build as well as completion of a fresh assembly where the correct clear sections are needed for the body. The sprue format keeps the panes grouped until use, so each section stays easier to sort, compare, and fit during the build process. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Headlight Parts Set for Model Vehicle Bodies
319007360€10.29
This clear parts set adds transparent light and glazing details to a model vehicle body, bringing sharper definition to the finished shell through molded lenses, window-style panels and small exterior inserts. The AA sprue holds multiple numbered components in clear material, while the matching sheet shows numbered sections and placement guidance that help keep each stage of body finishing easy to follow. Small lens-shaped pieces can be fitted where headlight or indicator details are needed, and the larger curved panels suit window or glazing areas that benefit from a separate transparent part instead of painted imitation. The runner includes markings such as AA, 1, 2, 3, 4, 7, 8, 9, 11 and 12, making it easier to match parts to the guide during assembly. The printed sheet also shows orientation examples for a larger rectangular panel section, supporting accurate placement when left and right positions or front and back alignment matter. Together, the clear sprue and guide sheet support a more precise exterior finish on compatible model bodies. This set suits body detailing sessions where light covers, windows and trim elements are added after painting. It also works well when replacing worn clear pieces or refining a shell with more distinct transparent accents and cleaner separation between painted and glazed areas. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Light Bar S770, model spare part insert
319007363€9.29
Clear Light Bar S770 is an EE Parts replacement frame with transparent molded sections for model maintenance, restoration, or parts replacement. The attached clear pieces sit on a single sprue, giving a tidy overview of each shape before trimming and fitting begins at the workbench. The frame image shows several small rounded transparent parts and larger elongated inserts, while the molded marking E2 and the material marking >PS appear directly on the sprue. A separate technical diagram identifies the EE part layout with grouped positions marked 1 and 2, adding a concrete reference for matching the correct section during repair or rebuild work. This kind of spare part suits projects where worn, missing, or damaged clear sections need to be replaced with parts that follow the original molded form. Used during a careful rebuild, the transparent inserts can restore defined light details and clean surface openings on a compatible model. The single-frame format also helps keep all sections together until the required piece is selected for trimming, test fitting, and final installation. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Parts Light Bar Model Accessory Sprue
319000848€12.99
This clear parts sprue is made for Light Bar 56348 model work and provides a set of transparent molded components for replacement, repair or completion tasks. The frame layout keeps each piece attached at defined gate points, so the parts stay organized until trimming and fitting begins at the workbench. The sprue carries several distinct clear shapes, including circular lens-style pieces, narrow rectangular inserts and rounded rectangular panels. That mix supports detail work on a matching model assembly where light covers or other transparent sections need to be restored with parts that match the original molded form. The transparent finish helps preserve the crisp appearance expected in scale builds, especially where visible lighting or panel details sit on the exterior. As a dedicated accessory part set, it suits careful maintenance of an existing build as well as completion of an unfinished project. On the bench, the frame can be clipped section by section to keep handling controlled while each insert is prepared for placement. It fits naturally into repair sessions, spare-parts storage and planned restoration work where a specific clear component is needed instead of replacing a larger assembly. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Parts M-B Actros 56335, model accessory
319000498€11.99
This clear parts set is made for the M-B Actros 56335 and provides the transparent molded sections used where glazing and light details define the finished model's look. The sprue includes a large curved windshield-style section, broad side window pieces and several smaller clear inserts that suit lamp or marker positions, giving a rebuild or replacement job the exact type of parts this area requires. The transparent runner format keeps each piece formed to its intended shape, which matters when cab contours, window openings and lens recesses need a clean visual match. Larger panes handle the main glazed areas, while the smaller round and rectangular sections cover the finer details that complete the front and side appearance. The molded markings on the frame identify it as the AA parts set and show the clear material type used for these components. This accessory fits naturally into repair work, restoration of an older build or completion of a model that needs fresh clear sections after wear or loss. On the bench, the grouped layout helps with sorting before cutting, test fitting and final installation on the M-B Actros 56335. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Parts Sprue for MB Arocs Model Kit
319000957€10.99
This clear AA parts sprue is made for the MB Arocs / 56352 and provides the transparent molded sections that give a scale truck build its finished glazing and light detail. Larger clear pieces on the runner form the main screen or window areas, while smaller round and rectangular sections add the crisp transparent accents that solid body panels cannot reproduce. The parts remain attached to a single molded frame for identification before removal, with visible numbering on the sprue to support part matching during assembly. The material marking >PSPS indicates polystyrene, a common choice for sharply molded clear components with defined edges and consistent fit in model construction. The layout groups multiple shapes on one runner, including curved sections, narrow inserts and plate-like transparent pieces that serve different exterior detail positions on the model. This set works as a practical replacement when original clear sections are missing, scratched or incomplete, and it also supports restoration of an unfinished MB Arocs build. On the bench, the transparent parts help restore the visual contrast between painted bodywork and clear glazing, while the smaller lens pieces sharpen the look of lamps and signal details once fitted in place. Warning! Not suitable for children under 14 years.
Basic accessories
D-Parts Batterybox, model truck spare parts
300005565€23.99
D-Parts Batterybox is a spare-parts set for 2-axle and 3-axle truck models, supplying the batterybox-related components needed when a build calls for replacement or completion of this specific section. The molded parts are arranged on sprues, making each shape easy to identify before cutting and fitting them into place. The set includes multiple glossy molded pieces with distinct structural forms, including bracket-style elements, cover-like sections and a longer central support piece with cylindrical mounting posts, elongated slots and raised platforms. Visible molded numbering such as 2, 3, 4, 6 and 8 helps separate the individual components during workshop preparation. This layout supports careful repair work on existing truck models and also helps keep parts grouped when rebuilding a batterybox assembly from scratch. On the bench, the sprued format makes it easier to compare shapes, check orientation and prepare each section in sequence before installation. For truck model projects with missing or damaged batterybox components, this set restores the correct hardware area with parts made for the stated 2-axle and 3-axle applications.
Basic accessories
DD Parts Bag 56366, model spare parts set
319006949€11.79
DD Parts Bag 56366 is a model spare parts set centered on clear molded components for repair, replacement and careful restoration work. The transparent sprue carries multiple small parts in one organized frame, making it easier to identify matching shapes before trimming and fitting them into the intended assembly. The set includes several circular dome-like pieces in different sizes as well as rectangular plate-like sections with raised central details and small holes. This mix supports targeted replacement where a build needs the correct transparent insert or a shaped panel section rather than a generic substitute. Because the parts remain connected to the molding frame, each piece stays separated and visible until use, which helps during planning, comparison and step-by-step removal with a side cutter or hobby knife. The clear finish also suits applications where light covers, windows or similar visible details need to retain their original look. On the workbench, this set fits naturally into repair sessions, part sorting and ongoing maintenance of an existing model. It also supports rebuild projects where a damaged assembly needs specific molded pieces to restore the intended appearance and fit without replacing larger sections unnecessarily.
Basic accessories
Decal Bag for 56020, model accessory, Leopard 2 A6
309400123€11.69
This decal bag is a model accessory for the 56020 Leopard 2 A6 Main Battle Tank and focuses on the markings that give the finished vehicle its specific identity. The waterslide sheet carries Bundeswehr-style registration plates, tactical numbers, insignia and unit graphics that turn large body panels, turret sides and smaller exterior sections into a more convincing scale replica. Alongside the exterior markings, the set also includes warning decals for the track area and printed reference labels for internal connector points. The warning graphics reproduce the caution markings placed near the rotating tracks and drive sprocket on the full-size vehicle. The connector sheet labels positions such as J5, J12, J13, J14, J16, J17, J18, J19, J20, J22 and J24, with functions including output gun, convoy marker, GFS harness, speaker, machine gun, turret motor, throttle motor, recoil motor, steering motor and flash unit. This gives the accessory value beyond surface finishing by supporting organized identification inside the model. During a fresh build, restoration or replacement job, the sheets help return worn markings and reference labels to the tank with clean, model-specific detail. They also suit careful refurbishment work when a Leopard 2 A6 body, turret or internal layout needs the original printed information restored after use or repair. Warning! Not suitable for children under 14 years.
Basic accessories
Diff. Gear Bag, RC spare parts for 56314
309400028€56.99
This differential gear bag is a dedicated RC spare parts set for model 56314 and centers on the mechanical parts that keep drivetrain power moving through the axle assembly. The assortment shown includes metal bevel gears, differential housings or covers, cross shafts, outdrives and long splined shafts, giving a focused replacement set for service work on the differential section. The bevel gear layout supports the transfer of torque between connected drivetrain parts, while the cross shafts and smaller pinion gears form the internal differential action inside the housing. Cup-style outdrives with cross-pin holes connect the assembly to the next driven parts in the system, and the threaded shaft ends support secure installation where the original hardware layout requires it. The machined metal finish visible across the set points to precise tooth profiles and clean mating surfaces, both important when replacing worn internal transmission parts. On the workbench, this set suits rebuilds after heavy running, routine maintenance, or the replacement of damaged gears inside the axle or gearbox area. It also helps keep a compatible model ready for continued use when a full differential refresh is needed rather than changing single parts one by one. Warning! Not suitable for children under 14 years.
Basic accessories
Diff. Shaft A & B, model spare part for 56301
309805458€13.49
Diff. Shaft A & B is a dedicated spare part for model 56301 and is intended for targeted replacement within the matching assembly. The set contains 2 metal shaft components with distinct end profiles, making it suited to a specific mechanical position rather than general-purpose use. The shafts are shown with threaded ends and machined sections that support accurate seating with the corresponding hardware in the designated model. One component features a rounded end section, while the other uses a narrower pin-style end, indicating 2 different roles within the same mechanism. This defined geometry matters when restoring a worn, bent or missing original part, because the replacement needs to match the existing layout and connection points already built into model 56301. As a model spare part, this set fits maintenance work, repair jobs and parts replacement during a rebuild of the specified vehicle. The compact metal components are easy to store with workshop spares and useful to keep on hand when a drivetrain or linked mechanical section needs the correct shaft pair for continued operation. Warning! Not suitable for children under 14 years.
Basic accessories
Drive Sprocket (2), model spare part for 56019
309805943€35.99
This Drive Sprocket set supplies 2 matching replacement parts for 56019 and focuses on one of the key mechanical contact points in a tracked model assembly. The silver-coloured pieces use a circular toothed rim and a spoke-style inner structure, creating the distinctive technical form expected from drive components that engage with a track system. The hub-shaped centre section adds further definition to the part geometry, with a hollow interior that reflects its role as a fitted mechanical component rather than a decorative add-on. The pair format is useful where both sides of a running system need matching parts or where one spare is kept ready for later maintenance. The studio presentation shows the parts from upright and angled views, making the toothed profile, drum-like centre and open inner detailing clearly visible. As a model spare part, the set is intended for accurate replacement on 56019 rather than general cross-range use. In workshop use, the sprockets suit repair jobs where worn or missing drive parts need to be exchanged with matching components. They also fit restoration work on an existing tracked model, where keeping the original mechanical layout matters as much as the finished appearance. Warning! Not suitable for children under 14 years.
Basic accessories
E-Parts Coupler Plate Servo Saver Truck Parts
300005471€23.99
This E parts set supplies coupler plate and servo saver components for compatible truck model assemblies, giving worn or missing mechanical pieces a direct replacement path. The black molded parts arrive on a single sprue, where each shape remains easy to identify before removal and fitting. Visible numbering on the runner helps separate the individual components during workshop preparation, especially when several small mechanical pieces are handled at once. The sprue format keeps the parts organized until assembly begins, which supports cleaner sorting on the bench and reduces mix-ups between similar shapes. The set is aimed at maintenance and repair rather than decoration, with the focus placed on functional hardware used in steering and coupling-related areas. The molded layout also makes it easier to inspect each piece for shape and fit before installation. On a repair bench, this set supports the replacement of damaged truck parts after regular running or long storage. It also suits planned rebuilds where original steering-related pieces need to be refreshed so the model can return to service with the intended mechanical layout.
Basic accessories
F Parts Highroof M-B Actros 56335 model parts
319000500€36.99
This F Parts set is identified for the Highroof M-B Actros 56335 and serves as a dedicated model supplies component for that truck project. The naming points to the high-roof cab section, which helps keep a rebuild aligned with the intended form of the original design rather than relying on generic substitute pieces. Within a workshop setup, a clearly designated parts set like this supports more accurate maintenance planning for an existing build. The F Parts label distinguishes this group from other component sections in a larger model structure, while the 56335 reference ties it to a specific Actros variant named in the data. That makes the set useful for replacing worn or missing cab-area elements, preparing a stored kit for completion, or keeping a matching spare on hand for future repair work. On the bench, this kind of dedicated replacement part helps keep truck model projects moving when one section needs attention. It fits naturally into restoration, rebuild, and long-term upkeep tasks centered on the Highroof M-B Actros 56335. Warning! Not suitable for children under 14 years.
Basic accessories
F-Parts Axle 56319, model spare parts set
309005896€33.99
F-Parts Axle 56319 provides a focused spare parts set for model vehicle maintenance, with black injection-molded components supplied on sprues for clean identification before installation. The layout supports precise replacement work when a build needs matching structural sections instead of a complete new assembly. Visible in the set are several distinct molded forms, including 2 long rail-style pieces, 2 curved arm-like sections, smaller linkage or mount-style parts, a bracket pair, 1 upright cylindrical piece and 1 larger rectangular housing. Number markings such as 5 and 6 appear on the sprue, adding a practical reference point while sorting and preparing the parts. The molded format keeps edges and connection points intact until each section is removed, which helps maintain order during bench work. The set is suited to repairs where the original geometry of a specific section matters for alignment and placement. On a workshop table, the sprue format makes it easier to compare shapes before cutting, test the intended position of each section and replace worn or missing components with matching forms. For ongoing upkeep of an existing model, this set supports selective repair work without replacing unrelated assemblies. Warning! Not suitable for children under 14 years.
Basic accessories
F-Parts Bag(Fx2), model spare parts set
319008213€10.49
F-Parts Bag(Fx2) is a dedicated spare parts set for compatible Tamiya model or RC applications, supplied as 2 identical black sprue frames with F marking. The layout keeps each molded component attached to the runner until removal, which helps separate small pieces and makes bench work easier to track. Across the 2 frames, the set provides a repeated group of numbered parts visible on the sprues, including curved arm-like pieces, a long narrow bar with circular holes at both ends, 3 small cylindrical bushings or spacers, 2 rectangular mounting blocks and a larger central bracket or holder piece on each frame. The molded numbering beside the parts supports identification during assembly or replacement, especially when a manual or existing build refers to individual part numbers. The duplicated frame format also helps when both sides of a mechanism use matching components or when worn pieces need like-for-like replacement. This set fits naturally into repair, restoration and ongoing maintenance work on a compatible Tamiya build. It also serves as a practical source of original-style replacement pieces when an existing assembly needs the F frame rather than a mixed assortment of generic hardware.
Basic accessories
F-Parts Suspension Brace, Truck model spare parts
300005472€22.49
F-Parts Suspension Brace is a replacement parts set for truck model maintenance, supplied as 1 molded sprue with multiple structural components on a single runner. The black injection-molded frame groups the parts in one place, making it easier to identify and separate the required pieces during a repair or rebuild session. The set covers suspension and brace functions, with shapes intended for mounting, linking and supporting sections within a compatible chassis assembly. Larger bracket-style pieces, curved arm forms and smaller fittings provide the kind of hard parts typically needed when an existing build needs fresh structural hardware rather than cosmetic changes. Because the parts stay attached to the runner before use, sorting and preparation remain clear at the workbench. This format also helps confirm that the full molded set is present before installation begins. F-Parts suits rebuild work, accident repair and routine replacement of worn chassis sections in truck model projects. On a bench beside the main assembly, the sprue gives a focused source for the specific suspension and brace elements needed to return a compatible model to running or display condition.
Basic accessories
FF Parts Side Panel Heavy Rack Model Parts Set
319007444€31.59
FF Parts Side Panel Heavy Rack is a model parts set for builders who need specific body and rack components for a compatible project. The sprue-mounted layout keeps the white moulded sections together before removal, making it easier to inspect the shapes, plan the build sequence and prepare each section for trimming, test fitting and finishing at the bench. The visible parts include 2 large curved rectangular side panels, 2 cylindrical ribbed sections and smaller connecting pieces formed as one unassembled set. That combination suits repair work on an existing model, replacement of worn or missing sections, or conversion work that calls for this exact panel and rack arrangement. The white surface is well suited to primer and paint, while the separate moulded sections allow clean preparation before final installation. Because the parts are supplied on sprues, builders can remove only the needed sections and keep the remaining pieces together until the next stage of assembly. On the workbench, this set supports careful dry fitting, surface preparation and colour finishing before the parts are added to the main build. It also works well as a spare parts source for restoring a compatible model with matching shaped panels and drum-like components.
Basic accessories
Ford Aeromax Sticker Bag, decal set for RC truck
309495289€11.99
The Ford Aeromax Sticker Bag is a decal set for finishing the 1/14 RC Tractor Truck Ford Aeromax with model-specific graphics across the cab exterior and interior. Large blue Ford oval logos, Aeromax name decals, grey trim pieces and orange marker-style panels give the bodywork the markings shown for this truck, while the flat printed sheet keeps each graphic ready for precise application during the final detailing stage. Beyond the outer panels, the sheet also carries dashboard strips, instrument cluster graphics, vent details and console decals that bring more definition to the cab interior. Small permit-style labels, white regulatory lettering and route-style markings add the kind of transport details that make a scale truck scene look more convincing at close range. California and Nevada license plate decals are both included on the sheet, giving 2 regional plate options for the finished model. Numbered positions on the sheet help align each marking with the intended area of the body or interior. This decal sheet suits replacement work on an existing Ford Aeromax build as well as a fresh finishing pass on a newly painted cab. Applied to body panels, dashboard sections and trim areas, the graphics help the truck read clearly as a Ford Aeromax from shelf display distance and in close-up hobby photography. Warning! Not suitable for children under 14 years.
Basic accessories
Frame L&R for 56301, model spare part
309805455€53.99
Frame L&R for 56301 provides 2 matching frame rails for the specified model, with a black metal construction and a long U-shaped channel form that supports the structural layout of the assembly. The evenly spaced round holes and elongated slots create clear fastening points, so the rails can be positioned where alignment and secure mounting are required. The left and right configuration matters because mirrored frame sections handle the geometry of a larger build differently than a single straight bracket. Here, the hole pattern runs across the rail length, while the raised tabs at one end add further mounting points for connected sections. That combination makes these parts suited to repair work, replacement of damaged sections, or restoration of an existing 56301 build where the original frame geometry needs to be maintained. The metal format also gives the rails the rigid profile expected from structural chassis components. In workshop use, these rails fit naturally into rebuilds that focus on bringing a model back to its intended structure after wear or damage. They also suit planned maintenance where a bent or missing frame section would affect how adjoining parts line up during reassembly. Warning! Not suitable for children under 14 years.
Basic accessories
Fuel Tank Sun Visor, model parts set for S770
319225229€24.29
This molded parts set supplies a fuel tank, a sun visor and additional exterior components for the S770, all formed in black material on a single sprue. The frame keeps each section organized before removal, so the build starts with a clear overview of the shapes, mounting points and numbered references needed for placement on the model. Alongside the main tank and visor pieces, the sprue carries smaller caps, brackets, connectors and rod-like elements that support a more complete restoration or replacement job. The numbered layout helps match each section to the intended position during assembly, especially when several similar small fittings appear on one frame. Because the parts arrive unassembled, trimming, cleanup and surface finishing can be handled to suit the condition and style of the existing build. The black molded finish also suits projects where matching darker trim sections matters. On the bench, this set fits naturally into repair work, parts replacement or a paused build waiting on missing exterior pieces. It also works well as a reference frame for checking shapes and part locations before separating components for final installation on an S770 model. Warning! Not suitable for children under 14 years.
Basic accessories
G Parts Bag 56366, model parts set, black sprues
319006952€39.99
G Parts Bag 56366 supplies a grouped set of black molded components for scale model assembly, with the parts arranged on sprue frames for clear handling at the workbench. The visible selection includes a large box-like shell section, a broad base panel and smaller fitted pieces that suggest a structured mechanical module with layered outer and inner surfaces. The base section shows molded reinforcement detail and round mounting points, giving builders clear reference locations when test-fitting adjoining sections. A square hatch-style panel with a recessed handle adds another defined surface element, while the long narrow frame pieces introduce linear structure that can read as rails, supports or ladder-like sections depending on the build. Smaller rectangular components remain attached to the runners until removal, which helps keep matching parts together during trimming, cleanup and paint preparation. The black material also makes panel edges, recesses and attachment points easy to distinguish while planning the next assembly step. On the bench, this parts set suits careful dry-fitting, surface finishing and staged sub-assembly work. It also supports replacement or restoration tasks where the correct molded section is needed to complete a specific build area with matching form and detail.
Basic accessories
G-Parts Bag G, model parts set for 56360
319004978€29.49
G-Parts Bag G is a moulded parts set for 56360, arranged on a single sprue with several structural sections that support repair, replacement or continued assembly work. The layout centres on a large chassis-style base plate, joined by a second flat panel and a group of smaller technical pieces that can be separated as needed for the matching model. The main sections show multiple cutouts, slots, screw holes and raised mounting points, indicating defined connection areas for further mechanical or body-related assemblies. Alongside the larger plates, the sprue also carries round disc-shaped parts, a rectangular cover-style section, a curved support-like piece and a narrow central structural element. This combination makes the set useful when a build needs specific frame-related parts from the original moulded runner rather than a single loose replacement piece. On the bench, the one-piece sprue format keeps all sections together until trimming begins, which helps with part identification and organised handling during a rebuild. The black moulded finish gives the set the technical look expected of vehicle understructure components, while the varied shapes and mounting features make each section easy to match to its intended position within model 56360. Warning! Not suitable for children under 14 years.
Basic accessories
G-Parts Coupler-Main-Plate Trucks Parts Set
300005473€23.99
This G-Parts set provides the Coupler-Main-Plate truck components as a single molded sprue, giving model builders a direct source for replacement or repair work on an existing Tamiya truck build. The black runner keeps each piece in its original molded position, making the shapes easy to inspect before cutting, trimming and fitting. The frame carries a large rectangular plate together with smaller matching sections, including square mounting pieces, ring-shaped parts and elongated molded elements. That layout helps separate major structural pieces from smaller connection parts while keeping the full group organized on one runner. Because the parts remain attached until removal, each section can be checked against the build step or worn component before installation. The molded arrangement also supports careful bench work, where clean part removal and dry fitting matter as much as the final placement. On the workbench, this set suits rebuilds, parts replacement and restoration of an older truck chassis assembly. It also helps when a damaged section needs to be swapped without replacing a larger assembly, keeping repair work focused on the exact molded components required.
Basic accessories
GG Parts Bag 56366, model parts set, chrome finish
319006953€27.49
GG Parts Bag 56366 adds bright exterior detailing to a scale model build with chrome-colored injection-molded parts arranged on a single sprue. The set centers on a wide tubular guard frame and 4 round lamp housings, creating the plated look often used for classic custom trim, utility bars or auxiliary lighting. The connected runner layout keeps each section together until trimming starts, which helps when planning the order of assembly and test fitting. Alongside the main frame and lamps, the sprue also carries cross-shaped supports and smaller paired bracket pieces that can be used as mounting hardware within the intended build. The chrome-look finish gives each contour a crisp edge, so curved bars, round lamp faces and compact attachment points remain visually distinct after installation. Visible sprue markings include GG, 5 and 2. On the bench, these parts suit builders refining a vehicle model with added front or rear bar detail and extra lighting accents. Once fitted, the plated surfaces catch the eye around the body shell and help smaller exterior components read clearly in close-up photos or shelf display scenes.
Basic accessories
GG-Parts Bag, model parts set, translucent orange
319006849€11.49
GG-Parts Bag is a model parts set with translucent orange injection-molded components that add visible detail to a compatible build. The runner carries several small lens-style pieces and 1 larger curved cover piece, giving the set a clear focus on replacement or finishing work where color, shape and molded texture need to match the original assembly. The translucent material suits parts that are meant to remain visually distinct on the finished model, and the attached sprue layout keeps each piece organized until the required section is removed. Molded surface texture on the smaller components supports a defined light-like appearance, while the larger curved section provides a broader shaped panel from the same runner. This makes the set useful when a build needs specific orange detail parts rather than a general assortment of hardware. Batteries are not included. On the workbench, the set fits naturally into repair jobs, restoration projects and careful parts replacement on an existing model. It also supports builders who want to complete a stored kit with matching molded components instead of substituting a different color or shape from another source.
Basic accessories
Globe Liner P-Parts Dashboard Spare Parts Set
300115178€24.99
The Globe Liner P-Parts dashboard set is a dedicated spare parts frame for the Tamiya 56304 truck model, focused on restoring interior sections with matching molded components. The sprue format keeps each piece organized before removal, which helps when planning a repair, replacing damaged cabin sections or completing an unfinished build. Visible parts on the frame include 4 ribbed seats, a steering wheel, a dashboard or console section, a floor panel with molded openings, a rectangular mounting panel and a long box-shaped interior or body component. This combination supports work on the cabin layout rather than exterior decoration alone. The molded pieces arrive unassembled and can be prepared with the usual model-building steps such as trimming, test fitting and paint finishing where required. As a dedicated parts set rather than a full kit, it suits targeted restoration work on an existing Globe Liner build. On the workbench, the frame gives model builders a practical way to replace worn interior details without sourcing each cabin section separately. It also fits rebuild projects where an older 56304 model needs fresh cockpit parts to bring the truck back into a more complete display condition. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler Chassis Frame L/R, spare part set
314305649€60.99
The Grand Hauler Chassis Frame L/R set provides the two side members that define the main structure of the truck chassis. Each rail is a long black metal strip with folded edges, creating the shaped profile needed for a frame section that sits straight and connects cleanly with surrounding parts in the assembly. A series of pre-drilled holes and elongated slots runs along both rails, giving multiple fastening points where the chassis layout requires them. That hole pattern matters during repair work, because the frame section has to match the original mounting positions rather than relying on improvised drilling or reshaping. The left and right format also keeps the replacement specific to the Grand Hauler designation in the data, instead of treating the frame as a generic strip. For model maintenance, this kind of matched structural pair is useful when a rebuild calls for fresh side members with the correct length, profile and opening layout. On the workbench, the rails suit careful restoration of the truck's central understructure before the larger build is reassembled around them. They also fit parts sorting and planned repair sessions where the frame geometry needs to be brought back to the intended layout with dedicated replacement members. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler D-Parts, model parts, chrome bumper
319000760€27.99
Grand Hauler D-Parts focus on the front bumper area and bring chrome-colored styling to a truck model build. The runner holds several shaped components in a reflective metallic-look finish, giving the front end a brighter, more defined appearance once fitted in place. The set centers on exterior detailing rather than mechanical changes, making it a useful choice when a build calls for fresh trim pieces in the bumper section. Curved grille-like forms, bracket-style elements and panel sections on the sprue show the variety of shapes used around the front of the model. Because the parts arrive attached to the runner, each piece stays organized until removal and assembly. The chrome-colored surface emphasizes molded lines and contours, which helps the finished truck present a more finished scale character at the nose. On the bench, these parts suit replacement work, detail restoration or a visual refresh of an existing Grand Hauler build. In a display setting, the reflective finish draws attention to the front fascia and pairs naturally with other bright exterior accents on a truck model. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler H-Parts Rear Fender Set, model parts
319000761€25.99
The Grand Hauler H-Parts Rear Fender set adds a clean replacement route for a truck build that needs fresh rear body panels. The pack provides 2 injection-molded fender components, shown on sprues in an unused state, with smooth curved outer surfaces and molded mounting details that suit careful finishing work. The white parts arrive unpainted, which leaves colour choice open for matching an existing cab and chassis scheme or for a full visual update during a rebuild. Small circular and rectangular molded sections with holes are attached on the frame alongside the main pieces, indicating connection points and supporting detail around the final fit. Because the set is identified specifically for the Grand Hauler, it suits targeted restoration, replacement or parts-based workshop planning rather than broad universal use. On the bench, the sprue format helps keep both main fenders and the smaller attached sections together until trimming begins. During a repair or refresh of a display truck, the paired layout supports a consistent rear view across both sides and gives the bodywork a complete, balanced finish once painted and installed. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler K-Parts, clear parts set
319115421€10.79
The Grand Hauler K-Parts clear parts set adds the transparent finishing elements that give a scale truck build its crisp visual definition. Supplied as a molded clear runner, it provides small formed components for the Grand Hauler and supports accurate replacement work when original clear sections are no longer available or no longer presentable. The runner groups several parts in one frame, which helps keep matching pieces organized before trimming and test fitting. Clear molded components are especially useful on visible exterior areas where light lenses, covers or similar detail sections need transparency rather than an opaque finish. The image shows round textured inserts, small cylindrical forms and rectangular molded sections, giving builders multiple detail shapes from one dedicated sprue. Because the set is tied to the Grand Hauler designation, it suits model-specific maintenance as well as careful restoration work on an existing build. On the bench, this kind of replacement sprue helps refresh a display truck with cleaner transparent details or complete a project that needs missing clear sections. It also fits neatly into a spare-parts setup for long-term upkeep of a Grand Hauler model. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler L-Parts, model parts in clear orange
319115423€10.79
Grand Hauler L-Parts in clear orange add the exact translucent colour and designated section needed for a focused model build or replacement task. The frame shown in the product data carries multiple small formed pieces together with larger rounded dome-like elements, all supplied on a single injection-moulded runner for organised handling before removal. The L marking on the sprue identifies this specific parts group within the Grand Hauler range, which matters when a build calls for one defined section rather than a broad assortment of unrelated components. The clear orange finish changes how light passes through the moulded shapes, giving these parts a distinct visual role wherever the model design uses transparent coloured details. Because the components remain attached by thin connectors, the layout stays easy to inspect before trimming and fitting. Visible moulded identifiers on the frame support part recognition during build preparation. This parts frame suits repair work on an existing Grand Hauler model as well as planned replacement during a fresh assembly. On the bench, the grouped runner format helps keep the required pieces together while the build moves from checking the sprue to cutting, finishing and fitting each part into place. Warning! Not suitable for children under 14 years.