On-road RC cars (2WD/4WD)

On-road RC cars (2WD/4WD)

1:10 Motul Autech GT-R, RC assembly kit, TT-02

The 1:10 RC Motul Autech GT-R assembly kit brings the shape of the 2014-spec NISMO GT-R to the workbench in a form built for running as well as display between sessions. Its polycarbonate bodyshell captures the low, sleek lines of the Super GT GT500 machine, linking a championship-winning race car to a chassis made for regular RC use. At the centre of the kit is the TT-02 touring car chassis, the successor to the TT-01 and an entry-level platform developed to make assembly more approachable for new RC builders. The shaft-driven layout gives the car a clear mechanical base, while the included TBLE-02S electronic speed controller works with brushed and brushless setups. A 540 electric motor is supplied for the standard drive package, so the core drivetrain is already matched to the chassis concept. Tamiya also positions the TT-02 as a platform with room to grow, with compatible Hop-Up Options available for later tuning and setup changes. Once assembled, the model suits open runs on parking lots and laps on prepared circuits, where the touring car format and race body styling feel most at home. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Audi quattro A2, RC assembly kit, TT-02

€154.99

The 1:10 Audi quattro A2 RC assembly kit pairs a classic rally silhouette with the TT-02 platform, creating a build that looks purposeful on the bench and tracks cleanly on paved surfaces. At 458 mm long and 187 mm wide, the finished car carries the wide-arched proportions, rear wing and period body lines of the quattro A2 in a clear polycarbonate bodyshell. Separate ABS parts add definition to the front and rear light cases, fog lamps, side mirrors and wing details, while silver 5-spoke wheels match the competition look. The main headlight buckets can be fitted with separately sold LEDs, adding another layer of scale realism to evening display or running sessions. Under the shell, 4-bevel differential gears and double wishbone suspension help the chassis deliver smooth cornering response. The TT-02 layout is known for its adaptable design, and the 257 mm wheelbase suits the body proportions closely. This kit suits builders who want the hands-on process of trimming, painting and finishing a rally car body before taking it onto smooth ground for RC driving. Radio gear, a battery pack, a charger and paints are required separately. Optional TT-02 tuning parts are also available for those who want to refine the setup further after the first runs.

On-road RC cars (2WD/4WD)

1:10 BMW M3 GT2 2009, RC assembly kit, TT-01E

€174.99

The 1:10 BMW M3 GT2 2009 RC assembly kit brings the race-bred shape of the 2009 GT2 machine into a detailed build with running performance to match. Its polycarbonate body captures the low, wide touring car silhouette, while the included LED light set adds a striking visual effect when the finished model heads onto smooth indoor or outdoor surfaces. At the center of the build is the TT-01E platform, a shaft-driven 4WD chassis with a low-profile bathtub frame. The 452 mm length, 188 mm width, 132 mm height and 257 mm wheelbase give the model the proportions of a full touring car, while the chassis layout keeps key mass low in the frame. Double wishbone suspension supports the running setup, and updated markings with masking stickers help complete the 2009 BMW M3 GT2 look with crisp body detailing. An electronic speed controller and Type 540 Torque-Tuned motor are included. Radio gear, a battery pack, a charger and paints are required separately. This assembly kit suits hobby sessions that combine chassis building, body finishing and on-road RC driving in one focused project. Once completed, the model fits track-style laps, car-park runs and shelf display between driving sessions.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 BMW M3 Sport EVO 1992, RC assembly kit

€169.99

The BMW M3 Sport EVO 1992 arrives here as a 1:10 RC assembly kit on the TT-02 chassis, pairing a classic touring car silhouette with a shaft-driven 4WD layout built for controlled on-road running. The lightweight 1.0 mm polycarbonate bodyshell comes unpainted, giving the orange Jagermeister race look and the updated markings their place during the finishing stage. The TT-02 platform uses an enclosed drivetrain layout, and the standard 257 mm wheelbase sets the proportions for this touring car format. Silver mesh style wheels are paired with slick tyres, matching the circuit-focused character of the body shape and rear wing. Side mirrors and the rear wing are supplied as ABS add-on parts, adding extra definition to the shell once fitted. The kit also comes with stickers and masking stickers for the paint job, while optional tuning parts are available for builders who want to refine the setup over time. With overall dimensions of 448 mm length, 185 mm width and 135 mm height, the model has the low, wide presence associated with early 1990s DTM machinery. Radio gear, a battery pack, a charger and paints are required separately. On a smooth indoor track, a car park circuit or a home workbench, the combination of scale bodywork, matched electronics and classic racing livery gives each stage of the build and each run a clear motorsport focus.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mercedes-AMG GT3, RC assembly kit, TT-02

€159.99

The 1:10 Mercedes-AMG GT3 RC assembly kit pairs the dramatic shape of the GT3 race car with the TT-02 chassis, creating a build that stands out with a long hood, low roofline and prominent rear wing. Its transparent polycarbonate body captures the full-size car's competition form in a lightweight shell that takes paint and markings for a finished race-ready look. At 453 mm long with a 257 mm wheelbase, the model has the proportions of a modern GT racer, and separately molded side mirrors and rear wing parts sharpen that outline further. The body is designed for PS-63 Bright Gun Metal, with PS-55 Flat Clear applied on the outside to achieve the matte finish described in the kit data. Stickers and masking stickers are supplied for the car's markings and paint layout, supporting a cleaner, more defined result across windows, lights and body graphics. The TT-02 platform is built as an entry-level chassis with scope for tuning, and the available option parts line gives room to refine the setup over time. This kit suits workbench sessions focused on body finishing, decal placement and chassis assembly, then moves naturally into on-road running once the build is complete. Radio gear and a battery pack are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mercedes-Benz 190 E EVO II, RC assembly kit

€174.99

The Mercedes-Benz 190 E 2.5-16 EVO II 1991 arrives here as a 1:10 RC assembly kit on the TT-02 chassis, pairing a classic DTM silhouette with a shaft-driven 4WD layout built for controlled on-road running. At 445 mm long, 184 mm wide and 137 mm high, the model carries the compact proportions and extended aero surfaces of the race car into a size that reads clearly on the track. The bodyshell uses 1.0 mm polycarbonate to form the over fenders, front spoiler, rear spoiler and large rear wing, while separate black ABS parts reproduce the side mirrors, front grille and emblems as distinct components. A 257 mm wheelbase gives the chassis a widely used touring car format, and the TT-02 layout is known for its straightforward shaft drive arrangement and stable footprint. Silver dish wheels and racing slick tires suit smooth surfaces, and the included stickers plus masking stickers support an accurate paint finish with the 1991 race livery. This setup suits bench assembly, body finishing and regular circuit sessions in equal measure, with the visual character of the DTM machine carrying through once the shell is painted and mounted. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mini Cooper Racing, RC assembly kit, MB-01

€164.99

The 1:10 Mini Cooper Racing RC assembly kit combines a compact MB-01 chassis with the unmistakable shape of the classic Mini Cooper Racing. At 315 mm long, 167 mm wide and 140 mm high, the model brings short-wheelbase proportions and retro touring style together in a format that stands out on the bench and on the track. The clear polycarbonate bodyshell captures the car's compact 2-door form in lightweight material ready for finishing, while updated markings sharpen the period racing character. Beneath the shell, the MB-01 platform uses a 2WD layout and a 210 mm short wheelbase. The center frame keeps the battery pack, motor and R/C equipment layout in place while final gears and steering linkage directions can be changed to switch between front- and rear-wheel drive. For rear-wheel drive cars, low or high motor position can also be selected. Unitized motor mount, final gear and suspension sections keep the build organized and make maintenance more straightforward after running sessions. 8-spoke wheels paired with 60D radial tires complete the road-going stance, and the symmetrical 4-wheel double wishbone suspension with friction dampers supports composed cornering on smooth surfaces. An electronic speed controller and 540 motor are included. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mini Cooper Rally '94, RC assembly kit, M-05

€154.99

The 1:10 Mini Cooper Rally '94 RC assembly kit combines compact front-wheel-drive handling with the distinctive shape of the classic rally car. Built on the M-05 chassis, it pairs a semi-monocoque frame with a low center of gravity, creating a focused layout that suits road running and careful setup work alike. The chassis uses a short 210 mm wheelbase and measures 322 mm long, 160 mm wide and 140 mm high. Its gearbox, motor, battery, receiver, servo and speed controller sit close to the centre of the frame, a layout chosen to keep weight distribution even across the car. The narrow structure gives the model a tidy footprint, while shaft drive forms the basis of the 2WD transmission. An electronic speed controller is included, along with a Type 540 Torque-Tuned motor. The unpainted polycarbonate bodyshell leaves the exterior ready for a custom finish, and the platform is compatible with many Tamiya bodies. On the bench, the compact dimensions and clearly defined chassis layout support a build that stays close to the mechanical essentials. Once completed, the short-wheelbase M-05 format suits smooth tarmac runs, display between sessions, and detailed body finishing that brings the Rally '94 character into view. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Nissan R91CP 1992, RC assembly kit

€179.99

The 1:10 Nissan R91CP 1992 RC assembly kit brings the long, low stance of a Group C racer into a detailed build with a polycarbonate bodyshell, separate black body accessories and a cockpit set with styrene driver figure. At 480 mm long, 204 mm wide and 109 mm high with a 280 mm wheelbase, the finished model carries the stretched proportions that define this endurance machine. The body is supplied unpainted, with included decals and pre-drilled body post holes that streamline shell preparation while leaving the final finish open to the chosen livery. Separate side mirrors, spoiler mounts, air intake and windshield wipers add layered exterior detail, and the light cases are moulded into the shell with no provision for LEDs. Underneath, the proven Group C Vintage platform pairs front and rear space frames with FRP plates in an ABS bathtub layout. The rear section uses a rigid axle, while the front end keeps its own independent movement for a layout that reflects classic RC circuit design. On a smooth track or a large indoor running area, the high-grip sponge tires and 5-spoke gunmetal wheels suit fast, flowing laps and stable corner entry. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 GT3 R (992), RC assembly kit

€169.99

The Porsche 911 GT3 R (992) arrives here as a 1:10 RC assembly kit with the low, wide stance and track-focused shape of the full-size race car translated into a detailed polycarbonate bodyshell. At about 479 mm long, 188 mm wide and 127 mm high, the model carries strong visual presence on the bench and on the circuit, with a separate polycarbonate rear wing and separate light cases sharpening the finished outline. Under the body, the shaft-driven 4WD TT-02 chassis uses a short 251 mm wheelbase and a layout known for straightforward adaptability. Black molded parts depict the side mirrors and wing stays, adding crisp contrast against the painted shell. Black 10-spoke wheels and slick tires complete the GT race look with a setup suited to smooth surfaces. The kit also includes stickers and masking stickers for the paint job, plus a urethane bumper to help keep the body in good condition during use. The result suits measured assembly sessions as much as running time, with each stage adding visible race-car detail before the chassis takes to the floor. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 TT-02 Type-SRX, RC chassis kit, 4WD

€339.99

The 1:10 TT-02 Type-SRX RC chassis kit brings a focused shaft-driven 4WD platform to on-road building, with race-oriented hardware chosen to make setup changes meaningful on the track. Full ball bearings, a 27T aluminum pinion gear and the included high speed gear set establish a 6.55:1 ratio that suits quick response and efficient power transfer through the driveline. This version draws on parts from the TT-02 Type-S series and adds a package of hop-up components selected for this chassis. Rear drive shafts use a 39 mm length specific to the Type-SRX and feature a hard coat for added lubricity at the contact surfaces. The TT-02 hi-torque servo saver with aluminum horn is fitted to protect the steering mechanism and servo when the front end takes load. Clamp type 5 mm aluminum wheel hubs, TRF damper oil seals, cross joints for low friction assembly universal shafts and short ball connector nuts for TRF dampers add further tuning-focused detail to the build. On a smooth circuit, the double wishbone suspension and direct driveline layout give a clear picture of how spring, damping and alignment changes affect corner entry and exit. A dedicated carrying case keeps the chassis together between bench work and running sessions. A body, radio gear, a battery pack, a charger, a motor, tires and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 1991 Audi V8 Touring, RC model kit, TT-02

€154.99

The 1:10 1991 Audi V8 Touring brings a landmark DTM racing car into RC form with the TT-02 platform underneath and a clear polycarbonate bodyshell above. Its wide sedan proportions, rear wing, side mirrors and No.45 Frank Biela markings give the finished build the stance of the 1991 championship car whether it is lining up on asphalt or resting between runs. The assembly kit pairs a shaft-driven 4WD layout with a Type 540 Torque-Tuned motor and an electronic speed controller, creating a direct, planted driving character on on-road surfaces. Two-piece mesh wheels carry racing slick tyres, matching the touring car look while supporting smooth rolling grip on paved ground. The TT-02 layout uses identical left and right suspension arms and uprights, which simplifies parts identification during the build. A 257 mm wheelbase is specified for the bodyshell, and ABS side mirrors add another scale detail to the finished car. Radio gear, a battery pack, a charger and paints are required separately. On a workbench, the clear body invites careful trimming, painting and decal placement to recreate the 1991 race livery with crisp panel lines and sponsor graphics. Once assembled, the chassis suits car park sessions, club practice laps and shelf display alike, with the historic Audi shape giving the model a strong presence even when standing still.

On-road RC cars (2WD/4WD)

1:10 2002 Mercedes-Benz CLK AMG, RC assembly kit

€154.99

This 1:10 RC assembly kit recreates the 2002 Mercedes-Benz CLK AMG with the long, low stance of the racing-based coupe and dimensions of 444 x 185 x 125 mm. The 257 mm wheelbase gives the shell the proportions used by the TT-02 platform, so the finished car carries the wide-fender silhouette and rear aero profile with a convincing on-road presence. The body is formed in 1.0 mm polycarbonate and comes with separate parts for the side mirrors and rear wing, adding extra definition beyond the main shell. Stickers and masking stickers are supplied for the paint job, supporting window masking and exterior markings during finishing. The kit includes the TT-02 chassis, a Type 540 Torque-Tuned motor and an ESC, combining shaft-driven 4WD with a layout widely used for electric touring builds. Radio gear, a battery pack, a charger and paints are required separately. On a smooth indoor hall floor or a clean stretch of asphalt, the slick-tire setup and 4WD layout suit controlled laps and steady corner entry. Between running sessions, the body finishing process, mirror fitment and wing installation give the model a detailed workshop character that continues after the chassis is built.

On-road RC cars (2WD/4WD)

1:10 Alfa Romeo Giulia Sprint GTA RC assembly kit

€174.99

This 1:10 RC assembly kit brings the Alfa Romeo Giulia Sprint GTA Club Racer into a compact on-road format with a prepainted polycarbonate bodyshell, classic racing proportions and a 385 x 167 x 132 mm overall size. The 225 mm middle wheelbase and MR layout named in the data place the focus on a nimble, planted chassis setup for detailed scale driving. At the center is the MB-01 chassis, a compact 2WD platform designed around configurable drivetrain choices. Final gears and steering linkage can be reattached to change between front- and rear-wheel drive without removing the battery pack, motor or RC equipment from the center frame. For rear-wheel drive cars, the motor position can be set low or high, adding another tuning option within the same chassis architecture. The kit also uses symmetrical 4-wheel double wishbone suspension with friction dampers, plus unitized motor mount, final gear and suspension sections that simplify access during setup and maintenance. An electronic speed controller and 540 motor are included. On the bench, the prepainted body and included stickers support a club-racer inspired finish with less body preparation before assembly. On the road, the 60 mm front and rear tires suit the compact touring-car stance, and the data specifies 60D tires for tire changes. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi R8 LMS 2008, RC assembly kit, TT-02

€169.99

The Audi R8 LMS 2008 arrives here as a 1:10 R/C assembly kit that combines GT3 race car presence with the proven TT-02 platform. Its 1.0 mm polycarbonate body recreates the shape of the 2008 LMS with a low roofline, pronounced side sections and a large rear wing, giving the finished car a sharp circuit look whether it is lining up on the floor or resting on a shelf between runs. The TT-02 chassis uses a shaft-driven 4WD layout, and the kit also includes an ESC and a Type 540 Torque-Tuned motor for a complete core drive package. With overall dimensions of 434 mm x 194 mm x 120 mm and a 257 mm wheelbase, the chassis sits in classic touring car territory and gives the body its long, planted proportions. Black 16-spoke wheels and racing slick tires complete the competition style, while stickers and masking stickers support the paint process and help bring the race livery to life with cleaner window lines and graphic placement. This assembly kit suits bench sessions focused on body finishing, decal work and chassis building, then moves naturally into on-road driving once the separately required equipment is added. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 BMW M4 GT3 EVO, RC kit, TT-02 chassis

€184.99

The 1:10 BMW M4 GT3 EVO RC kit brings the updated GT3 racer onto the TT-02 chassis, combining a detailed polycarbonate bodyshell with a shaft-driven 4WD layout built for consistent on-road running. Enlarged front air intakes, smaller exterior mirrors, redesigned headlights and rear lights, and the revised rear wing give the shell the current EVO appearance in a form that stands out on the bench and in motion. Under the body, the TT-02 platform uses a smooth underside, adjustable wheelbase, ground clearance, track width and gear ratio, creating a chassis that can be set up for different driving styles. Double wishbone suspension with suspension struts works at the front and rear, and the enclosed drivetrain helps keep the running gear tidy during regular use. A 540 torque-tuned motor and electronic speed controller are included, while the battery compartment is shaped to accept common battery types. Separate polycarbonate light cases and black ABS parts for the mirrors and rear wing struts add further definition to the body. With a length of 443 mm, width of 188 mm, height of 132 mm and a 257 mm wheelbase, the model has touring car proportions that read clearly on the track. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Citroen 2CV Charleston, RC assembly kit

€144.99

This 1:10 RC assembly kit captures the Citroen 2CV Charleston in the distinctive 1982 model year form, pairing its rounded bodywork with the compact M-05 front-wheel-drive chassis. The lightweight polycarbonate shell gives the classic silhouette a clean, crisp presence on the track, while separate molded parts recreate details such as the front bumper support, headlights and side mirrors. The M-05 chassis uses a monocoque structure and a 239 mm wheelbase, with the motor, battery pack, receiver, servo and ESC arranged for balanced weight distribution and a low center of gravity. A 3-piece steering linkage works with 4-wheel independent double wishbone suspension to support stable cornering, and tread-patterned radial tires with inserts sit on 11-spoke wheels in gun metal color. The included ESC is compatible with brushed and sensor-based brushless motors, and the set also comes with a 540-type motor for the drive system. Hop-Up Option parts are available for the M-05 platform for further chassis tuning. On a smooth indoor surface or a paved outdoor run, the compact front-wheel-drive layout gives the model a direct, lively character that suits repeated laps and careful line placement through tighter sections. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Citroen DS, RC assembly kit, MB-01 chassis

€154.99

This 1:10 RC assembly kit recreates the Citroen DS with the long, flowing lines that made the original 1955 car instantly recognizable. The lightweight polycarbonate body captures the early-period version with 2 rounded headlights, while the long-wheelbase MB-01 L layout gives the model a 239 mm wheelbase within overall dimensions of 419 x 198 x 137 mm for a planted on-road stance. The compact MB-01 chassis is built as a 2WD platform and uses a center frame that keeps the battery pack, motor and R/C equipment in place while drivetrain configuration changes are made. By changing the attachment directions of the final gears and steering linkage, the chassis can be set up for front-wheel drive or rear-wheel drive. For rear-wheel drive cars, a low or high motor position can be selected. The chassis also uses 4-wheel double wishbone suspension with friction dampers, and the motor mount, final gears and suspension are arranged in unitized sections for straightforward maintenance work. A 540 motor and electronic speed controller are included. On smooth on-road surfaces, the 60 mm front and rear tires suit the DS body shape and wheelbase with a composed, scale look. Radio gear, a battery pack and a charger are required separately, and the export body is supplied clear rather than pre-painted, leaving the finish open to a custom build.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 NISMO R34 GT-R Z-Tune, RC assembly kit

€234.99

The 1:10 NISMO R34 GT-R Z-Tune RC assembly kit brings the sharp lines of the rare 2-door coupe to the TT-02D drift chassis, combining detailed scale presence with a setup shaped for controlled sideways driving. The polycarbonate body recreates the widened fenders, vents and rear wing of the Z-Tune, giving the finished car a low, aggressive look on the track. At the center of the build is the TT-02D platform with a 257 mm wheelbase, shaft-driven 4WD layout and a protected drivetrain. A 540 SPORT TUNED motor and included electronic speed controller complete the drive package for responsive throttle input during drift sessions. The chassis specification also features 24 mm drift-spec tires, CVA oil dampers, full ball bearings and an aluminum motor heat sink. Window masking film is supplied for the body, supporting accurate paint separation on the glazing areas while the shell is finished. Numerous TT-02 option parts are available separately for further tuning. The kit, illustrated assembly instructions, electronic speed controller, 540 electric motor and polycarbonate body are included. Radio gear, a battery pack, a charger and paints are required separately. Once assembled, the model suits smooth indoor practice lines, marked parking-lot style layouts and display between runs, with the Z-Tune body shape giving every slide a distinctly motorsport-inspired silhouette.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Opel Kadett GT/E Rally, RC assembly kit

€179.99

The 1:10 Opel Kadett GT/E Rally RC assembly kit combines classic rally bodywork with the adaptable MB-01 chassis, creating a build that balances scale character and chassis tuning. The painted bodyshell, number 16 markings and 4 auxiliary front spotlights give the coupe a clear period competition presence while the compact platform keeps the mechanical layout visible and accessible during assembly. The MB-01 platform allows 3 wheelbase choices of 210 mm, 225 mm and 239 mm by changing the joint section between the lower deck and sub deck. Steering linkage length changes with the selected wheelbase, with the manual showing 84 mm settings for MR S and MR M plus an 87 mm setting for MR L. The chassis also allows a change between FF and MR layouts by reversing the differential unit direction, and that conversion calls for corresponding rebound screw settings of 1.0 mm at the front and 2.5 mm at the rear. In MR form, a high motor position can also be selected, and the electronics positions change accordingly. This assembly kit suits builders who enjoy adjusting layout as well as body style, whether the focus is shelf display between runs or testing different chassis configurations on a low-grip surface. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 GT3 R (992), RC assembly kit

€194.99

The Porsche 911 GT3 R (992) arrives here as a 1:10 R/C model assembly kit built on the TT-02 platform, combining a recognisable GT racing silhouette with a chassis layout made for accessible setup and consistent on-road driving. At about 479 mm long, 188 mm wide and 127 mm high, the finished car has the low, stretched stance that suits circuit-style running and shelf presence alike. Its polycarbonate bodyshell is pre-painted in Black and Gun Metal, with Smoke windows, a black rear wing and black light cases already finished for a clean race-ready look. Separate black parts depict the side mirrors and wing stays, adding extra definition to the body shape without turning the build into a paint-heavy project. The set also includes Item 51226 Urethane Bumper L for the TT-01 and TGS, fitted to help protect the body during regular running. Stickers and masking stickers are supplied for added detail in the finishing stage. Under the shell, the shaft-driven 4WD layout works with the short 251 mm wheelbase to keep the car composed through bends and direction changes. Black 10-spoke wheels and slick tires suit paved surfaces and complete the GT race character. The included instructions support the assembly process, while radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Supra (JZA80), RC assembly kit, 2WD

€154.99

The 1:10 Toyota Supra (JZA80) RC assembly kit combines the long, low shape of Toyota's 1993 flagship sports car with the configurable BT-01 platform for hands-on on-road running. At 457 x 185 x 135 mm, the finished model carries the Supra profile with a wide stance, a defined nose and the visual presence of a full-size coupe scaled for the bench and track. The BT-01 center frame is designed so the battery pack, motor and RC equipment setup can stay in place while the final gears and steering linkage are repositioned to change the drivetrain layout. That structure allows front-wheel drive, front-motor rear-wheel drive and midship rear-motor rear-wheel drive choices, with 6 setups available in total. Unitized sections for the motor mount, final gears and suspension keep the chassis layout organized during the build and during later maintenance. A Type 540 Torque-Tuned motor and ESC are included, and many Hop-Up Option parts for TT-chassis cars can be used for further setup tuning. The 4-wheel double wishbone suspension mirrors left to right and works with friction dampers for a clear, mechanical on-road setup. The 1.0 mm polycarbonate body gives the shell its light form over the chassis, making the Supra lines stand out during painted display and radio-controlled driving sessions alike. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Supra, RC assembly kit, TT-02D

€194.99

The 1:10 Toyota Supra on the TT-02D platform brings a well-known sports car shape into a drift-focused RC assembly kit with a 257 mm wheelbase and a detailed polycarbonate bodyshell. The body traces the aggressive lines of the original release from kit 58392, and carbon pattern decals for the engine hood and rear wing add a tuned street-racing look once the shell is finished. This version uses the TT-02D drift spec, a specially tuned form of the TT-02 chassis built around shaft-driven 4WD. Separately molded side mirrors and rear wing parts add extra scale definition, while an aluminum motor heat sink supports the included 540 SPORT TUNED motor during running. An electronic speed controller is included in the kit, so the core drive package is already matched to the chassis layout. The 24 mm Drifttech tires sit on metal-plated mesh wheels, giving the model the right contact patch and visual style for drift sessions. On a smooth indoor surface or a prepared hobby track, the combination of drift tires, oil dampers and the TT-02D layout supports long slides, quick direction changes and steady transitions. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya 1:10 RC Toyota Celica GT-Four Bundle

Product bundle consisting of: 1:10 RC Toyota Celica GT-Four TT-02 / 7,2V/1800mAh NiMH Race Battery TAM   Article number: 500608221 Product: 7,2V/1800mAh NiMH Race Battery TAM 500608221 - 7.2V/1800mAh NiMH race battery TAM from Carson: This racing pack delivers reliable power especially for RC vehicles and other model building applications and is fast-charging and high-current discharge capable. Technical data: 7.2 V, 1800 mAh, max. charging current 1.8 A; connection: Tamiya plug system. Fits many RC models.  

On-road RC cars (2WD/4WD)

Tamiya RC Opel Kadett Bundle

Product bundle consisting of: 1:10 RC Opel Kadett GT/E Rally MB-01 / Ball bearing Set BT-01/MB-01 (18) Article number: 300058729 Product: 1:10 RC Opel Kadett GT/E Rally MB-01 Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and midship rear motor / rear wheel drive (MR). The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Toyota Bundle

Product bundle consisting of: 1:10 RC Toyota GR 86 (TT-02) / PS-5 Black Polycarbonate 100ml / PS-60 Bright Mica Red Pc.100ml / PS-31 Clear Smoke Polycarbonate 100ml   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 1978 Ford Zakspeed Capri Turbo, RC assembly kit

€174.99

The 1:10 1978 Ford Zakspeed Capri Turbo RC assembly kit brings one of the standout DRM racing cars of the late 1970s onto the TT-02 chassis, pairing a low, wide touring car stance with shaft-driven 4WD. At 488 mm long, 205 mm wide and 124 mm high, the model carries the dramatic proportions of the original car into a build that suits detailed bench work and fast on-road sessions alike. The bodyshell is formed in 1.0 mm polycarbonate and arrives unpainted, leaving the paint finish and final race look open to the builder. ABS add-on parts supply the side mirrors and rear wing, and the kit also comes with stickers plus masking stickers for the paint job. A Type 540 Torque-Tuned motor and an electronic speed controller are included, so the drive package is already matched to the TT-02 platform. The standard 251 mm wheelbase sets the chassis geometry, while the enclosed drivetrain keeps the central layout tidy during assembly and maintenance. On the road, the front 26 mm slick tyres and wider 30 mm rear slick tyres give the model the visual balance of the 1978 racer, and the independent suspension at both ends supports smooth response through bends. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 2003 Focus RS Custom, RC assembly kit, TT-02

€149.99

This 1:10 RC assembly kit recreates the 2003 Focus RS Custom as a compact on-road machine with rally-derived shape and street-focused detailing. At 427 mm long, 185 mm wide and 145 mm high, the body sits over a 257 mm wheelbase and gives the finished car a low, purposeful stance on the TT-02 platform. The bodyshell uses 1.0 mm polycarbonate, a material chosen for light weight and crisp shaping across the bumper contours, flared arches and roofline. Separate parts are used for the side mirrors and rear wing, which adds more definition than a one-piece shell alone. The custom street version is depicted without sponsor logos, keeping the finish clean and focused on the car's form. A Type 540 Torque-Tuned motor and ESC are included, so the drive package is already specified for the chassis layout. Radio gear, a battery pack, a charger and paints are required separately. On-road running suits the model's proportions and wheel setup, while the included stickers and masking stickers support the painting and marking stages before the shell is mounted in place. The combination of scale bodywork, shaft-driven transmission and detailed finishing steps makes this kit as engaging on the bench as it is during controlled runs on smooth surfaces.

On-road RC cars (2WD/4WD)

1:10 Alfa Romeo Giulia Sprint GTA, RC assembly kit

€164.99

This 1:10 R/C assembly kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer on the MB-01 chassis, pairing classic touring car lines with a compact 2WD platform. The lightweight polycarbonate bodyshell captures the shape of the 1965 coupe in a format sized at 385 mm long, 167 mm wide and 132 mm high, creating a focused build that carries period racing character onto the track. A 225 mm middle wheelbase defines this version of the MB-01, with the motor mounted in a midship rear position for rear-wheel drive. The chassis design allows 3 wheelbase choices, and the drivetrain layout can be changed between front- and rear-wheel drive by altering the attachment directions of the final gears and steering linkage while the battery pack, motor and R/C equipment remain on the center frame. Rear-wheel drive setups can also use a low or high motor position. The kit runs on 60 mm front and rear tires and uses 60D tires when replacements are needed. Stickers are included to create a club racer design inspired by amateur-driven competition cars. The 4-wheel double wishbone suspension and friction dampers suit smooth circuit running, while the unitized motor mount, final gears and suspension sections keep the mechanical layout easy to follow during assembly and maintenance. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 au TOM'S GR Supra, RC assembly kit, TT-02

€164.99

The au TOM'S GR Supra arrives here as a 1:10 R/C model assembly kit with the TT-02 chassis and the low, wide proportions of a modern GT500 racer. At 466 mm long, 188 mm wide and 125 mm high, with a 257 mm wheelbase, the model carries the stretched stance and planted silhouette that make the full-size car so distinctive on the circuit. The clear polycarbonate body is paired with separate polycarbonate front light cases, while black ABS resin parts add the side mirrors and rear wing as individual exterior details. Canards are also included, and the body set comes with stickers plus masking stickers for the paint job, supporting the layered race livery shown by the shell. Tamiya also includes Item 51007, the Urethane Bumper M for TT-01 and TGS applications, to help protect the body during use. Front light cases are separate parts, and LEDs are not attachable. Radio gear, a battery pack, a charger and paints are required separately. On the bench, the dimensions and 257 mm wheelbase help when planning body fit and stance on the chassis. Once finished, the GT500 bodywork, rear wing and slick-tire setup give the model a strong touring-car presence for display, tuning sessions and R/C running alike.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi 90 quattro Racing, RC assembly kit

€169.99

The 1:10 Audi 90 quattro Racing RC assembly kit brings late-1980s touring race style to the TT-02 platform, with a 446 mm long polycarbonate bodyshell, a 192 mm width and a 127 mm height that give the car its broad, low competition look. Separate red ABS parts shape the mirrors, rear wing and air ducts, so the finished shell carries more depth than a one-piece body alone. A 251 mm wheelbase places the body on the short TT-02 layout, while the shaft-driven 4WD design keeps the drivetrain direct and neatly packaged through the chassis. The kit also includes a Type 540 Torque-Tuned motor and ESC, giving the running gear a matched starting point for paved-surface driving. Newly designed white dish wheels use a +4 mm offset, and the included urethane bumper helps protect the bodyshell during running and body mounting. Radio gear, a battery pack, a charger and paints are required separately. On a smooth car park, club track or other paved layout, the slick-tire setup and 4WD chassis suit clean, fast laps and precise line changes. During the build, the separate aero details, wheel design and racing proportions give the shell a focused finish that stands out on the stand as clearly as it does in motion.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi 90 quattro Racing, RC assembly kit

€179.99

The Audi 90 quattro Racing arrives here as a 1:10 R/C assembly kit on the TT-02 platform, pairing classic 1989 touring car lines with a chassis layout built for controlled on-road running. At 446 mm long, 192 mm wide and 127 mm high, the finished model carries the broad fenders, deep front treatment and tall rear wing that defined the race machine's silhouette. The bodyshell is formed in polycarbonate and comes pre-painted in White PS-1 with Smoke PS-31 windows, so the main body finish is already in place before final detailing begins. Wheel arches are pre-cut and body mount holes are pre-made, which streamlines shell preparation while leaving the final finishing work to the builder. A 540 torque-tuned motor and electronic speed controller are included as part of the drive package. The 251 mm wheelbase gives the chassis the proportions used by many 1:10 on-road builds, and the included urethane bumper helps protect the bodyshell during close running. Radio gear, a battery pack and a charger are required separately. On a smooth indoor track or open asphalt space, the low touring car stance, slick tyre setup and 4WD drivetrain suit repeated laps, measured steering inputs and clean acceleration out of bends. The finished model also carries the visual character of the original Audi racer, making it equally satisfying between driving sessions on a shelf or workbench.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi R8 LMS 2008, RC model car, TT-02

€185.99

The 1:10 RC Audi R8 LMS 2008 pairs a modern GT racing silhouette with the TT-02 platform, creating a model car that carries both visual presence and a clear mechanical layout. The polycarbonate body captures the low nose, stretched cabin and broad fenders of the full-size racer, giving the finished car a track-bred look whether it is parked on a shelf or moving through a smooth corner. As an RC assembly kit, this version leaves the build itself as part of the appeal. The TT-02 chassis is known for its shaft-driven 4WD design and straightforward structure, which makes the placement of major components easy to follow during construction and later maintenance. The separate body format also opens space for a custom painted finish that can lean toward period race styling or a cleaner single-colour scheme. Radio gear, a battery pack, a charger and paints are required separately. On the floor or on tarmac, the low GT shape and 1:10 format create a convincing racing impression with each pass. The combination of scale detail, chassis engineering and hands-on assembly suits hobby sessions that continue beyond the first build into setup changes, body finishing and repeat driving runs.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi V8 1992 Touring, RC assembly kit, TT-02

€159.99

The 1:10 Audi V8 1992 Touring RC assembly kit brings classic touring-car presence to the TT-02 platform, pairing a 463 mm long body with a 257 mm wheelbase for a planted on-road layout. Its clear polycarbonate bodyshell recreates the imposing lines of the 1992 race car, and separate side mirror parts add another layer of scale detail once fitted. The body measures 188 mm in width and 138 mm in height, giving the finished model the broad, low proportions associated with this era of circuit racing. Included stickers reproduce the 1992 Audi V8 Touring markings, while masking stickers help guide the paint work on the clear shell. The TT-02 chassis uses a shaft-driven 4WD configuration, and its symmetrical layout keeps major components arranged for balanced weight distribution. Coil-spring damped double wishbone suspension at the front and rear works with 4-bevel differential gears to support smooth cornering and composed running on tarmac. On a home workbench, the kit offers a focused build centred on chassis assembly, body finishing and wheel fitment. Once completed, the silver mesh-style wheels, slick tyres and detailed sedan silhouette give the model a strong track-day look during on-road driving. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 BMW 318i STW, RC car kit, TT-01E

€164.99

The 1:10 RC BMW 318i STW brings a touring car silhouette into a build centered on the TT-01E platform, combining scale presence with radio control handling. As a kit, it suits builders who want the body, chassis and running gear to come together as a complete RC car rather than a display-only model. The BMW 318i STW designation gives the shell a clear motorsport identity, while the TT-01E layout anchors the mechanical side of the project in a widely recognized Tamiya chassis format. This pairing makes the model appealing both as a build subject and as a running car with a defined on-road character. The data identifies battery power and radio control operation, so the finished car is built for active driving rather than static shelf placement. Batteries are not included. On the bench, the kit format supports a measured assembly process that leads into body finishing and final setup. Once completed, the 1:10 scale format and RC control create a focused driving session on smooth surfaces, where the touring car shape and chassis-based construction come through in motion as clearly as they do during the build.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Citroen DS, RC assembly kit, MB-01 chassis

€174.99

This 1:10 RC assembly kit recreates the Citroen DS with the long, flowing proportions that made the original car stand out, pairing a pre-painted blue polycarbonate body with smoke-tinted windows and the early-style front end with 2 rounded headlights. At 419 mm long, 198 mm wide and 137 mm high, the model carries the DS shape with a clear road-car presence on the chassis. Under the body, the MB-01 platform uses a compact 2WD design built around a center frame. The layout allows 3 wheelbase options, and the drive system can be changed between front-wheel drive and rear-wheel drive by altering the attachment directions of the final gears and steering linkage. For rear-wheel drive cars, a low or high motor position can be selected. The chassis also uses 60 mm front and rear tires, with 60D tires specified for tire changes. An electronic speed controller and 540 motor are included. The 4-wheel double wishbone suspension uses friction dampers and a symmetrical structure, giving the running gear a tidy, technical layout during assembly and maintenance. Unitized sections for the motor mount, final gears and suspension help keep service work organized. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 DB01SR Chassis, RC assembly kit, 4WD

€329.99

The DB01SR Chassis kit brings a 1:10 belt-driven 4WD buggy layout together with the Baldre polycarbonate body, creating a focused RC build with race-oriented hardware already in the box. The 2 identical drive belts give the drivetrain a symmetrical basis that suits loose surfaces and fast direction changes on off-road tracks. This chassis kit is supplied with multiple Hop-Up Option parts, including front and rear assembly universal shafts, front and rear aluminum hex hubs, front and rear dish wheels, a TRF201 rear wing set and 2 sets of reinforced drive belts. The gear differentials use steel bevel gears, a combination intended for lower maintenance needs and compatibility with high-power motors. Square-shaped battery packs can be installed, which broadens battery fit within the chassis format. Radio gear, a battery pack, a charger and paints are required separately. On a dirt course, the slipper clutch helps the buggy settle its drive as grip changes through corners and rough sections. The carrying case keeps the chassis kit and included parts together between build sessions, transport and track days.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 F104 PRO II w/Body, RC assembly kit

€254.99

The 1:10 F104 PRO II w/Body is an RC assembly kit built around the lightweight F104 direct drive chassis, paired here with upgraded components and a new lower deck for a sharp, responsive formula racing setup. At 440 mm long, 180 mm wide and 88 mm high with a 270 mm wheelbase, the layout captures the long, low stance of a modern single-seater while keeping the mechanical package focused and compact. Its FRP double deck chassis uses an inline longitudinal battery position, helping keep the central layout clean and purposeful. At the rear, an aluminum ball differential lets the rear wheels be changed without dismantling the differential, a practical detail for tuning and maintenance between runs. Semi-pneumatic synthetic rubber tires support the on-road formula format with a realistic look and planted contact patch. The body set adds 2 side pontoon configurations, including alternative lower sections for chassis fitted with larger RC equipment. Separate parts depict the complex front wing, low rear wing, rear diffuser, mirrors and helmet, giving the finished car a layered competition look once painted and marked. Radio gear, a battery pack, a charger and paints are required separately. On the bench, the kit offers detailed assembly and setup work; on smooth tarmac, the direct drive layout and formula proportions create a focused RC driving session with quick reactions and clean racing lines.

On-road RC cars (2WD/4WD)

1:10 Fiat 131 Abarth Olio Fiat, RC assembly kit

€184.99

This 1:10 RC assembly kit captures the Fiat 131 Abarth Rally Olio Fiat in a compact rally format built around the MF-01X chassis. The polycarbonate body measures 400 mm long, 180 mm wide and 132 mm high, and the 239 mm L-size wheelbase gives the shell the proportions of the original competition car as it sits over the chassis. The body uses separately molded components for the side mirrors and rear wing, which helps preserve the distinct shape of these details instead of flattening them into the shell. Polycarbonate light cases are designed for separately sold 5 mm LEDs, opening the door to a more complete front and rear light setup. The kit also includes stickers for body details and logos, allowing the Olio Fiat livery to be built up across the shell with the correct visual character. A Type 540 Torque-Tuned motor and ESC are included. Radio gear, a battery pack, a charger and paints are required separately. On the ground, the MF-01X layout combines shaft-driven 4WD with 4-wheel double wishbone suspension, a combination suited to paved running and flat dirt stages. The 239 mm wheelbase and higher rally-style stance give the chassis the look and clearance associated with classic rally machines. It suits bench sessions focused on body finishing just as well as outdoor runs where the suspension can work over loose, dusty surfaces.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Ford Escort Custom, RC assembly kit, TT-02

€154.99

The 1:10 Ford Escort Custom brings classic 1998 touring car style to the TT-02 platform in an RC assembly kit with a 425 mm length, 189 mm width, 145 mm height and 257 mm wheelbase. Its low roofline, wide body shape and race-inspired proportions give the finished model a strong track presence whether it is being built on the bench or lined up for a run. The bodyshell is formed in 1.0 mm polycarbonate and comes with separate parts for the side mirrors and rear wing, so the exterior gains extra depth beyond a one-piece shell. White ABS dish wheels pair with treaded tires for the period-correct look shown by the Escort Custom body. Stickers and masking stickers are included for the paint job, supporting cleaner window lines and sharper placement of the livery details. The kit is based on the TT-02 chassis, a shaft-driven 4WD design with a bathtub frame layout that keeps the main components arranged in a straightforward format. Radio gear, a battery pack, a charger and paints are required separately. On a shelf, the Ford Escort Custom body, wing and mirror parts create a focused motorsport silhouette with clear 1:10 scale character. During running sessions, the 4WD TT-02 layout and independent suspension support controlled handling while the detailed shell keeps the model visually tied to the full-size car.

On-road RC cars (2WD/4WD)

1:10 Ford Focus RS Custom, RC assembly kit, TT-02

€154.99

This 1:10 RC assembly kit recreates the Ford Focus RS Custom on the TT-02 platform, pairing a compact 427 mm length with shaft-driven 4WD for a layout built around controlled on-road running. The pre-painted 1.0 mm polycarbonate bodyshell gives the model its white custom finish straight away, while the 185 mm width and 145 mm height keep the proportions close to the full-size car's assertive stance. Separate parts depict the side mirrors and rear wing, adding sharper body definition than a single-piece shell alone. The 257 mm wheelbase works with the TT-02 layout to place the main components in a balanced arrangement across the chassis. Stickers and masking stickers are included for the finishing work, and the body arrives with pre-cut wheel arches and pre-made body mount holes. Smoke-tinted windows add contrast to the white shell, and the custom street version is presented without sponsor logos for a cleaner look. On a workbench, the kit offers a focused build centered on fitting the bodyshell, chassis parts and running hardware into a complete 4WD touring car. Once assembled, the combination of racing radial tires, 16-spoke wheels and the Focus body shape gives the model a crisp on-road presence suited to driving sessions and shelf display alike. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Ford GT Mk.II 2020, RC assembly kit, TT-02

€159.99

This 1:10 RC assembly kit recreates the Ford GT Mk.II 2020 as a low, track-focused machine with a 479 mm length, 188 mm width and 112 mm height. The 257 mm wheelbase gives the model the stretched proportions of the full-size car, while the lightweight polycarbonate shell brings the body lines into a form suited to painting, trimming and final detailing. Separate parts are used for the flying buttresses, rear wing and side mirrors, so the finished car carries more depth than a one-piece shell alone. Twin 5-spoke wheels match the race-bred look, and the included markings add the visual finish shown by the GT Mk.II design. The TT-02 platform is built around a shaft-driven 4WD layout, and its 4-wheel independent double wishbone suspension uses matching arm and upright parts side to side. That shared parts layout keeps maintenance more straightforward when the chassis is opened for adjustment or replacement work. On the bench, the body invites a careful paint process with masking for windows and light areas before the graphics go on. Once assembled, the long wheelbase, low roofline and prominent aero parts give the model a planted circuit stance that stands out in running sessions as clearly as it does at rest. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Ford Mustang GT4, RC assembly kit, TT-02

€154.99

The 1:10 Ford Mustang GT4 RC assembly kit brings GT4 race car presence to the TT-02 platform with a sharply formed polycarbonate body, a 459 mm overall length and styling based on the full-size car's CAD data. Front and rear light cases are also molded in polycarbonate, giving the shell extra depth around the lamps once the body is finished and mounted. The TT-02 chassis places this model in Tamiya's shaft-driven 4WD touring car range, with a layout designed to keep upkeep straightforward while leaving room to explore the broad TT-02 option parts line. Stickers are included to create the original livery, and masking stickers support the paint process on windows and detail areas. The shell also uses separately molded parts for the rear wing and side mirrors, which helps preserve the distinct GT4 silhouette. A 257 mm wheelbase is specified for the body, and the shell is prepared with pre-cut wheel arches to reduce trimming during assembly. On a smooth indoor surface or a paved outdoor run, the low racing body, slick tires and touring car chassis combine into a focused on-road driving setup with a clear motorsport look. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Honda NSX 1998 Racing, RC assembly kit

€159.99

This 1:10 RC assembly kit brings the 1998 Honda NSX Racing onto the TT-02 platform in a form that combines scale presence with focused on-road running. At 435 mm long, 194 mm wide and 121 mm high, with a 257 mm wheelbase, the finished car carries the low, stretched proportions of the race machine across tarmac and smooth indoor surfaces. The bodyshell uses 1.0 mm polycarbonate, a material chosen for low weight and crisp shaping around the NSX lines. Gun metal 6-spoke wheels are paired with racing slick tires, giving the model the visual character of a circuit car and the contact patch suited to paved running. The TT-02 chassis uses a shaft-driven 4WD layout, a format that distributes drive front and rear through a central shaft for stable acceleration and composed handling. A Type 540 Torque-Tuned motor and ESC are included as part of the running package. Stickers and masking stickers support the paint process with defined window lines and race graphics. On a smooth car park, club floor or home workshop bench, the model suits builders who want both body finishing and driving in one project. Radio gear, a battery pack, a charger and paints are required separately, allowing the final setup and colour scheme to be chosen to match the intended running style.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Honda NSX Racing, RC assembly kit, TT-02

€174.99

This 1:10 RC assembly kit brings the 1998 Honda NSX Racing into a compact on-road format with a 435 mm long body, a 257 mm wheelbase and the low, wide proportions that define the full-size race car. The pre-painted polycarbonate bodyshell arrives in PS-1 White with PS-31 Smoke windows, so the main color layout is already in place before the final exterior details are added. The bodyshell uses 1.0 mm polycarbonate and is shaped to capture the lines of the 1998 Honda NSX Racing, from the low nose to the extended rear wing profile. The TT-02 chassis uses a shaft-driven 4WD layout, a format known for its straightforward drivetrain path and composed handling on paved surfaces. An ESC and Type 540 Torque-Tuned motor are included, giving the chassis its electric drive package straight from the kit. Gun metal 6-spoke wheels and racing slick tires match the car's circuit-focused character, while stickers and masking stickers help complete the livery and window detailing. On a smooth floor or paved running area, the long wheelbase and 4WD layout support clean tracking through bends and steady power delivery out of corners. The pre-painted body also suits builders who want to focus more time on assembly, decal placement and final setup than on the first paint stage. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Impreza Monte-Carlo 99, RC kit, TT-02

€164.99

The 1:10 Impreza Monte-Carlo 99 RC kit brings late-1990s rally character to the TT-02 platform, combining a detailed polycarbonate bodyshell with shaft-driven 4WD for controlled on-road running. The body captures the classic competition shape and uses separate side mirror and rear wing parts, so the finished car carries more definition than a one-piece shell alone. This assembly kit includes an electronic speed controller, a 540 electric motor, a polycarbonate body and detailed illustrated assembly instructions. Window masking stickers support a cleaner paint finish around the glazing, while the included sticker sheet recreates the Monte Carlo markings shown on the car. The TT-02 layout is designed as an accessible 4WD chassis, and its broad range of option parts opens the door to later setup changes as driving preferences develop. Gold 16-spoke wheels and rally block tires complete the period rally look with a tread pattern that matches the car's competition style. On a smooth car park, indoor hall or similar running area, the balanced TT-02 layout gives the model a steady, readable feel through direction changes. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Lancia 037 Rally, RC assembly kit, TA02-S

€234.99

The 1:10 Lancia 037 Rally RC assembly kit brings a classic Group B silhouette to the TA02-S platform, pairing the short-wheelbase chassis with a body shape known from the 1983 works rally car. At 422 mm long, 186 mm wide and 132 mm high, the model carries the compact stance, wide arches and rear wing that define the 037 on the stage. The body is injection molded and fitted with newly produced front bumper and sticker sheet parts created for this release. Metal-plated light cases frame the headlights, taillights and fog lamps, while separate side mirrors and windshield wipers add extra surface detail beyond the main shell. Inside, the cockpit insert depicts both driver and co-driver alongside the dashboard, giving the cabin a more complete rally layout when viewed through the glazing. The TA02-S chassis uses a bathtub frame and is compatible with standard Type 540 motors. An electronic forward and reverse speed controller is included. Radio gear, a battery pack, a charger and paints are required separately. On a paved course, the shaft-driven 4WD system and short wheelbase combine into a lively rally-style driving character, while the double-wishbone suspension and oil dampers help the chassis work through repeated corner entries. The detailed shell, competition markings and cockpit scene also give the finished car strong presence between running sessions.

On-road RC cars (2WD/4WD)

1:10 Lancia Delta HF Integrale, RC assembly kit

€169.99

The 1:10 Lancia Delta HF Integrale RC assembly kit pairs classic rally car shape with the TT-02 chassis, a shaft-driven 4WD platform built around a tub frame layout. At 407 mm long, 186 mm wide and 159 mm high, the model carries the compact, upright proportions of the original car while the 257 mm wheelbase sets the stance on the chassis. The unpainted polycarbonate body arrives with separate mirrors and a rear spoiler, ready for finishing work that brings out the car's period rally character. Under the shell, the TT-02 layout combines a central driveshaft with front and rear cone differentials using 4 bevel gears. The front end is toe adjustable, and the motor mount also accepts type 380 motors in addition to the included type 540 motor with air cooling. A battery compartment designed for different battery types broadens setup choice, while the included electronic speed controller completes the core drive package. Rally block tread tyres and white wheels match the car's competition look and suit loose-surface style running. The kit format gives the build real substance, from body preparation to chassis assembly and final setup. Decals and window masking film are included for the finishing stage, supporting accurate placement of markings and clean window lines. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 M-07 Concept Chassis Kit, RC assembly kit

€194.99

The 1:10 M-07 Concept Chassis Kit is a front-wheel-drive RC assembly kit built around a rigid 1-piece monocoque with lower deck and integrated upper frame sections. At 332 mm long and 164 mm wide, the layout keeps the running gear compact and direct, creating a chassis that responds quickly while leaving core service points easy to reach between sessions. The M-07 uses 4-wheel double wishbone suspension with newly designed long arms and dedicated long steering linkage components. That geometry gives a wide setup window and supports measured changes in handling when rear toe is adjusted with spacers. The differential can be removed from the underside with minimal disassembly, which helps when tuning or servicing the drivetrain. Full ball bearings reduce friction through the transmission, and the chassis is also compatible with low-profile servos and standard IFMAR square-shaped Li-Po battery packs. Stabilizers can be fitted separately, and reinforced body mounts provide a more secure shell attachment. On a home workbench, the selectable 225 mm or 239 mm wheelbase opens the chassis to different M-chassis body combinations. At the track, the direct front-wheel-drive layout, oil-damped suspension and accessible setup points support repeatable changes that can be felt clearly from one run to the next.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 M-08R Chassis Kit, RC assembly kit

€319.99

The 1:10 M-08R Chassis Kit is an RC assembly kit built around the rear-wheel drive M-08 Concept platform and equipped with a broad package of competition-minded option parts. Carbon fiber battery holders, a carbon fiber body mount base and a dedicated 20 g chassis weight shape a layout aimed at controlled balance on paved circuits, while the blue anodized finish on key parts gives the chassis a crisp technical look during bench setup and track preparation. At the rear, the TA06 ball differential uses 12 3/32-inch balls to manage power delivery with a stable, planted feel. Reinforced K parts support the gearbox and steering area, and M-07 Concept reinforced D parts use carbon fiber-reinforced resin in the suspension arms. Aluminum turnbuckle shafts in 3 x 18 mm, 3 x 23 mm and 3 x 32 mm sizes allow length adjustment without removing the adjusters, which speeds up tuning work between runs. Hex head screws are used throughout the build, and the kit also contains option parts such as aluminum wheel nuts, wheel hubs, suspension shafts, ball connectors, a servo saver, universal shaft cross joints and an aluminum shaft set. Radio gear, a battery pack, a charger and paints are required separately. On a club track or a car park circuit, the chassis supports measured setup changes for steering feel, suspension movement and rear traction. The exposed layout also suits workbench tuning, where damper settings, turnbuckle length and drivetrain setup can be adjusted before the next session.

On-road RC cars (2WD/4WD)

1:10 MB 190E debis Zakspeed, RC assembly kit

€159.99

The 1:10 MB 190E debis Zakspeed RC assembly kit brings classic DTM character to the TT-01 Type E platform, pairing a detailed touring car body with shaft-driven 4WD for controlled on-road running. The 445 mm length, 184 mm width and 257 mm wheelbase give the chassis the proportions of a full touring racer, with a long, low silhouette that stands out on the track and on the shelf. The transparent polycarbonate body is supplied with attachments and reproduces the race car shape with a separate rear spoiler, mirrors, chrome-plated radiator grille and Mercedes-Benz star. The body shell is finished with markings that build the debis Zakspeed race look shown by the 1990s DTM car. A Torque Tuned motor is included together with an electronic controller, creating a complete drive package around the TT-01 Type E layout. The 6-spoke rims and 26 mm slick tires match the on-road setup, while the suspension geometry works with independent front and rear movement for a settled response through corners. As a kit model, this car suits builders who enjoy preparing, painting and fitting a body shell before the first run. On a smooth circuit or open paved space, the low touring profile, shaft drive and slick tire setup support fast laps, clean direction changes and a strong scale racing presence. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 McLaren Senna, RC assembly kit, TT-02

€159.99

This 1:10 RC assembly kit brings the McLaren Senna into an on-road format with a low polycarbonate body, black ABS side mirrors and a separate rear wing that sharpen the supercar silhouette. At 466 mm long, 194.6 mm wide and 118 mm high, the model has a broad, flat stance, while the 257 mm wheelbase gives the proportions a stretched, purposeful look. The TT-02 chassis uses a shaft-driven 4WD layout, a format known for straightforward construction and broad setup flexibility across different running preferences. A Urethane Bumper L sits at the front to take the edge off minor contact during use and handling. The body shell requires painting, cutting out, attachment of parts and sticker application, so the finished car carries the builder's own finish rather than a pre-decorated shell. Radio gear, a battery pack, a charger and paints are required separately. On smooth ground, the racing radial tires and 10-spoke wheels suit the car's road-going character and visually match the sharp lines of the McLaren body. The kit fits hobby sessions that combine body finishing, chassis assembly and later driving time, with the completed model equally at home in running sessions or parked where the body shape can be appreciated up close.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mercedes-AMG GT3 EVO, RC assembly kit, TT-02

€179.99

The Mercedes-AMG GT3 EVO arrives here as a 1:10 RC assembly kit on the TT-02 chassis, combining modern GT3 bodywork with a shaft-driven 4WD layout built for controlled on-road running. At 454 mm long, 189 mm wide and 120 mm high, the model carries the low, stretched proportions of the race car, while the 251 mm short wheelbase shapes a compact touring car footprint on the bench and on the circuit. The body is formed in lightweight polycarbonate and uses separate polycarbonate front light cases, plus individual rear wing and canard parts to define the front and rear aero surfaces with more depth. Separate black ABS parts depict the side mirrors and rear wing stays, adding contrast and sharper edge definition to the shell. The kit also includes Item 53415 Touring Car Urethane Bumper Sponge. LED lights are not attachable on the front light cases. A Type 540 Torque-Tuned Motor is specified in the kit data, and the included ESC completes the main electronics package supplied in the box. This combination suits measured assembly sessions, painted body finishing and repeated runs on smooth tarmac or indoor on-road surfaces. Radio gear, a battery pack, a charger and paints are required separately, so the build can be completed with the preferred running equipment and body finish.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mercedes-Benz CLK-GTR, RC assembly kit

€274.99

This 1:10 RC assembly kit pairs the 1997 Mercedes-Benz CLK-GTR with the TC-01 chassis, combining low GT racing proportions with a shaft-driven 4WD layout built for active on-road running. The polycarbonate body recreates the streamlined coupe form in a 470 mm length and 194 mm width, giving the finished car a long, planted stance that stands out on a circuit or display shelf. A 257 mm wheelbase sets the proportions, while silver mesh wheels and racing slick tires underline the competition look. The rear wheels use a wide tread, adding visual weight at the back of the car. Under the shell, the composite monocoque frame places the motor centrally and sends drive through front and rear propeller shafts with oil filled gear differentials. The suspension mirrors full-race thinking with A-shaped long arms and inboard front and rear setups, where push rods and rocker arms actuate the oil dampers. A rear transverse battery position also accepts 139 x 47 x 25 mm square-shaped battery packs. Adjustment options make the chassis rewarding to tune for repeated track sessions, with spacers and shims used to alter camber, skid and toe angle settings. Identical left, right, front and rear suspension arms and uprights help keep maintenance more straightforward when setup changes are part of the routine. A 540 motor and assembly guide are included. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mitsubishi Lancer Evo V, RC assembly kit

€154.99

The 1:10 Mitsubishi Lancer Evo V RC assembly kit brings late-1990s rally-bred styling to the TT-02 platform in a road car specification. At 445 mm long, 185 mm wide and 145 mm high, with a 257 mm wheelbase, the model has the proportions to give the Lancer Evolution V shape real presence on the track and on the bench. The bodyshell uses 1.0 mm polycarbonate, a material chosen for low weight and crisp molded form around the bulging fenders, hood louvers, air intakes and rear section. Separate parts are used for the side mirrors and rear wing, adding depth beyond a one-piece shell. The kit also comes with stickers and masking stickers for the paint job, supporting accurate window masking and exterior markings during finishing. Beneath the shell, the shaft-driven 4WD TT-02 chassis provides the mechanical base, pairing straightforward drivetrain layout with the stable feel expected from an on-road touring platform. 12-spoke silver wheels and tread patterned racing radial tires complete the stance with a road-focused look that suits paved running. On a workbench, the body, markings and separate exterior parts support a detailed finishing session; on an indoor hall floor or smooth asphalt, the TT-02 layout and 4WD system give the model a composed, planted character through laps and direction changes.

On-road RC cars (2WD/4WD)

1:10 Monster Beetle, RC assembly kit, 2WD

€234.99

The 1:10 Monster Beetle RC assembly kit brings the shape of the early Volkswagen Beetle onto a raised 2WD off-road chassis, pairing classic custom styling with the tall stance and oversized tires that made the 1986 original stand out. At 410 x 290 x 240 mm, the model has a broad, planted presence that reads clearly on the bench and on rough ground. The body is formed in ABS, while the chassis keeps the ABS space frame layout of the earlier release. Rear universal drive shafts transfer power smoothly, and rubber boots help shield the joints from dust during off-road use. A large dust cover protects the installed R/C equipment, and the set also contains a driver figure that completes the cockpit view. The suspension layout combines double-wishbone front arms with a trailing arm rear setup, giving each axle a distinct mechanical character within the build. This reissue suits hobby sessions that mix careful assembly with outdoor running on dirt, gravel and other uneven surfaces. Radio gear, a battery pack and a charger are required separately. Once built, the combination of Beetle bodywork, tall ride height and deep-tread tires gives each pass the unmistakable Monster Beetle silhouette.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Motul Autech Z 2023, RC assembly kit, TT-02

€159.99

The 1:10 Motul Autech Z 2023 RC assembly kit brings Super GT presence to the TT-02 platform with a low, wide touring car shape and a detailed polycarbonate shell. At 468 mm long, 188 mm wide and 120 mm high, the finished car has the stretched proportions of the full-size racer, and the 257 mm wheelbase gives the chassis a balanced footprint for on-road driving. Separate polycarbonate front and rear light cases add depth to the bodywork, while canards, black ABS side mirrors and the large rear wing sharpen the race-bred silhouette. The shell is paired with stickers and masking stickers for the paint job, allowing the livery lines and sponsor graphics to be finished with clean separation. The TT-02 layout uses shaft drive for 4WD transmission and is built around a straightforward chassis design that keeps the mechanical arrangement easy to follow during assembly. Front and rear suspension hardware, the central battery position and the enclosed drivetrain layout give the model a tidy, competition-style structure. On a smooth car park or club track, the slick tires and 6-spoke wheels suit fast laps, sweeping corners and repeated setup sessions. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Motul Autech Z 2023, RC car kit, TT-02

€184.99

The 1:10 Motul Autech Z 2023 brings current GT race styling to the TT-02 platform with a sharply contoured Nissan Z bodyshell, broad fenders and a tall rear wing that stand out on the track and on the shelf. Its low touring-car stance and enclosed wheel arches give the finished model the compact, aggressive look seen in full-size circuit machines. The body is formed in polycarbonate and supplied for painting, so the red, black and gray livery can be built up with clean color separation and race-focused detail. Sponsor-style markings, the number 23 graphics, window tint areas and exterior mirrors add another layer of scale character once applied. The TT-02 chassis places the shaft-driven 4WD system in a straightforward layout that suits regular on-road running and keeps the mechanical package easy to understand during the build. Deep-dish wheels and slick tyres reinforce the circuit theme and match the body's wide, planted proportions. On a smooth car park, indoor hall or club track, the model combines visual drama with the direct feel of a 4WD touring chassis. Radio gear, a battery pack, a charger and paints are required separately. After assembly and finishing, the Motul Autech Z 2023 works equally well for driving sessions, display between runs, or adding a modern Super GT shape to an RC collection.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Nissan Skyline GT-R R33, RC kit, TT-02D

€194.99

The 1:10 Nissan Skyline GT-R R33 RC assembly kit pairs the unmistakable shape of the fourth-generation Skyline with the TT-02D platform, a drift-focused version of the TT-02 chassis. With its 257 mm wheelbase, detailed polycarbonate body and large rear spoiler, the model brings the long, low stance of the R33 into a format built for controlled slides and precise line changes. The body shell is supplied with masking film for the windows, making paint preparation more straightforward while keeping the glazing areas crisp. An aluminum radiator detail adds another visual accent to the finished shell, and included stickers complete the exterior markings. Under the body, the shaft-driven 4WD layout channels power through a protected drivetrain, a useful setup when repeated drift runs put constant load through the transmission. CVA oil pressure shock absorbers support stable chassis movement, and full ball bearings help the running gear move with less friction. The included electronic speed controller and 540 electric motor complete the core drive system. Radio gear, a battery pack, a charger and paints are required separately. On a smooth indoor surface or a clean stretch of asphalt, the TT-02D layout supports long arcs, quick transitions and repeated practice laps. The finished chassis also leaves room to explore numerous TT-02 option parts available separately for further tuning and setup changes.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Opel Calibra V6 Cliff, RC assembly kit

€149.99

The 1:10 Opel Calibra V6 Cliff RC assembly kit brings 1990s touring car presence to the bench and the circuit with a low, wide body shape and a shaft-driven 4WD layout underneath. At 448 mm long, 185 mm wide and 128 mm high, with a 257 mm wheelbase, the model carries the proportions of the full-size race car into a format built for on-road running. The clear polycarbonate bodyshell is supplied with separate side mirrors and a rear wing, so the finished shell gains extra depth once painted and detailed. Stickers and masking stickers support the paint job and help place the Cliff race livery with crisp separation lines. The TT-01 Type-E platform places the drivetrain in a balanced bathtub frame, a layout widely used for approachable electric touring car builds. Silver ABS dish wheels complete the period race look and sit neatly under the broad fenders of the Calibra V6 body. This assembly kit suits focused build sessions as much as driving time, with each stage moving from body finishing to chassis setup in a clear sequence. On smooth tarmac and similar on-road surfaces, the long wheelbase, 4WD system and touring car proportions combine into a planted, circuit-style driving feel. Radio gear, a battery pack, a charger and paints are required separately.