Sort by:

Top sellers
  • Top sellers
  • New
  • Price ascending
  • Price descending
Filter

Filter
Price
Category
Brand
Brands & licenses
Scale
1:35 BW Flak-Panzer Gepard (1)

Military model vehicles 1:35

1:35 BW Flak-Panzer Gepard (1)

300035099

€26.49

Article number: 300035099 Product: 1:35 BW Flak-Panzer Gepard (1) This is a 1/35 scale plastic model assembly kit depicting the Gepard, a post-WWII anti-aircraft tank operated by West Germany. ★From the 4km-range 35mm cannons to the radar equipment front and rear, the form of the tank is captured in style. ★Features moving barrel and radar depictions, plus opening turret rear hatches. ★Metal net is included in the kit to recreate engine deck grille details. ★Comes with a commander figure in beret.   Warning! Not suitable for children under 14 years.

1:35 Ger. Halftr. w/4-Bar.AA Gun (5)

Military model vehicles 1:35

1:35 Ger. Halftr. w/4-Bar.AA Gun (5)

300035050

€32.99

Article number: 300035050 Product: 1:35 Ger. Halftr. w/4-Bar.AA Gun (5) Recognising the excellent tractive force and cross-country ability of half tracks, the German Army Ordnance Bureau decided in 1932 to develop six military half tracks, from a 1-ton to a large 18-ton tractor. Different car makers were ordered to develop one of these. Krauss-Maffeir in Munich took charge of an 8-ton half tracks. Because this firm had given attention and study to half tracks since 1928, they completed a prototype, named KMm7 as early as 1933. It soon developed into the KMm8 and KMm9, and in 1936 the KMm10 was put into production. It was not until the KMm10 was born that the 8-ton half track was officially designated "Medium 8-ton Tractor (Sd.Kfz-7). The last production model, KMm11 was completed in 1938 and put into production immediately. The production of the 8-ton half track totalled about 1,200 in number by the end of World War II. One of these models was the 8-ton half track with 20mm four-barrelled AA machine gun (Sd.kfz 7/1)   Warning! Not suitable for children under 14 years.

1:35 Ger. PzKpfw. IV Ausf. D (3)

Military model vehicles 1:35

1:35 Ger. PzKpfw. IV Ausf. D (3)

300035096

€21.99

Article number: 300035096 Product: 1:35 Ger. PzKpfw. IV Ausf. D (3) This is a 1/35 scale plastic model assembly kit depicting the Ausf.D variant of the German WWII tank Pz.Kpfw.IV. ★From the short-barrelled 75mm gun to the powerful design, the form of the tank is recreated in style. ★Comes with parts to recreate either early or late production Ausf.D variants. ★Includes three figures depicted in uniform seen during the invasions of Poland and France in the opening years of WWII.   Warning! Not suitable for children under 14 years.

1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1)

Military model vehicles 1:35

1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1)

300035194

€45.99

Article number: 300035194 Product: 1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1) The German Tiger I Tank featured a powerful 88mm gun as well as an excellent armor and was the greatest opponent to Allied forces during WWII. This is a 1/35 scale plastic model of the mid-production variant of which 1,354 units were produced from July 1942 to August 1944. The distinct silhouette and features of the mid-production model including the mechanically-complicated suspension, detailed loader's hatch, and equipment such as a scoop have all been realistically reproduced. The model features link type assembly tracks to enhance scale realism.   Warning! Not suitable for children under 14 years.

1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)

Military model vehicles 1:35

1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)

300035020

€22.99

Article number: 300035020 Product: 1/35 WWII Sdkfz.251/1 Halbk. Hanomag (5) In 1938, the German Army decided to develop an armoured personnel carrier on the basis of the 3-ton half track (HL-KL-9p). Hanomag Hannoversch Machinenbau (AG) in Hannover was ordered to develop the running gear and Bussing-NAG in Berlin was to develop the superstructure to be armoured. Design work was hastened on the model of existing armoured cars and a prototype was completed at the end of 1938. The Germans tested the prototype in the Kumahsdorf Proving Ground and accepted it for mass production. Thus was born the Armoured Personnel Carrier Hanomag Sdkfz 251/1 which, we may safely say, was a synonym for the German mechanized corps that showed activity in all battlefields throughout the war.

1:35 Ger. Horch 4x4 Type1A Veh. (1)

Military model vehicles 1:35

1:35 Ger. Horch 4x4 Type1A Veh. (1)

300035052

€17.99

Scope of delivery: kit, instructions. decor   Warning! Not suitable for children under 14 years.

1:35 Ger.Flak 8,8 w/Motorcycle (9)

Military model vehicles 1:35

1:35 Ger.Flak 8,8 w/Motorcycle (9)

300035017

€32.99

Article number: 300035017 Product: 1/35 WWII Ger.Flak 8,8 w/Motorcycle (9) This famous weapon is well known for its role in World War II. It did, in fact, have its origins during the first World War, when guns of this calibre were used in an anti aircraft role.   Warning! Not suitable for children under 14 years.

1:35 WWII PzKpfw. II Ausf.F/G (5) SK.121

Military model vehicles 1:35

1:35 WWII PzKpfw. II Ausf.F/G (5) SK.121

300035009

€14.49

Article number: 300035009 Product: 1/35 WWII PzKpfw. II Ausf.F/G (5) SK.121 In the morning of September 1, 1939, the German forces consisting of the 3rd, 4th, 8th, 10th and the 14th Armies invaded Poland all heading for Warsaw, its capital. This was the beginning of the 2nd World War that had shaken the whole world for six years and the Germans made a good show of their war efforts at the start with this violent surprise offensive by massed air forces and mechanized ground forces in close co-ordination, the so-called "Blitzkrieg". It was none other than the Pzkpfw 11 that had played the key role in this Blitzkrieg which started with the invasion of Poland to be followed by break-through of the Maginot-line 7 months later and ended with the surrender of France. In anticipation of the delay in production of the two main strength tanks of the Pzkpfw III and the Pzkpfw IV then under development, the Ordnance Department decided in 1934 to develop a new tank instead to fill the gap. It gave specifications of the proposed new tank to the following three companies - the Mann, the Krupp and the Henschel. The specifications envisioned a tank weighing less than 10 tons and armed with 2 cm and 7.92 mm machine guns, one each. Among the designs of the rivaling three companies presented, the one by the Mann was selected and the Mann in cooperation with the Daimler-Benz developed a first tank of the a1 type in 1935. When 25 tanks of the same type were produced, the tank was officially named, "Panzer Kampfwagen II". After the first 25, another 25 tanks of the a2 type and 50 of the a3 type were produced in succession by 1936. Tanks of these 3 types thus produced were equipped each with a 6-cylinder, 130HP, May-Bach HL37 engine and credited with a maximum speed of 40km/h. However, it was decried that the horse-power was not enough and the engine was replaced with a May-Bach HL-62 one of 140 HP. The frontal armour, too, was reinforced and a new tank of the b type was produced. In 1937, the Pzkpfw II was further improved and a series of new ones of the c type were produced. The c-type tanks used 5 large sized road wheels suspended only at one end by leaf spring. This suspension system newly introduced became a common feature to all the pzkpfw II produced ever since. Also, the front portion of hull was reshaped into a more roundish form. From 1937 to the beginning of 1940, Pzkpfw II of mass production types, A, B, and C, were manufactured in great numbers. To increase their productivity's, the frontal armour plate was replaced with an angular single-piece one. Pzkpfw II with specifications described above played the key role in the Blitzkrieg. At the start of this Blitzkrieg, the German tanks numbered 2580 in all, of which nearly half amounting to 955 in number were the Pzkpfw II. In 1940, mass production of the F type was started. The new Pzkpfw II was reinforced in its frontal armour (thickened to 35mm) and side (to 20mm). However, the improvement added its weight and its overall weight reached up to 9.5 tons. The main gun was replaced with a 20mm KwK 30 machine gun. The gun used to be an anti-air MG but remodeled into a main gun for a tank. Frontal armour to cover upper hull, also, was changed into a plain single-piece plate. Further, a false look-out window beside the genuine one for the driver and another for the same were newly added. These were the distinct features of the F-type tanks. After the F-type ones, those of the final mass-production type G were produced. Their main guns were much more powerful KWK 38 MGs, and each tank of this type was fixed a sundries-box at the rear of gun turret. These two were main features that clearly distinguished the G type from the preceding ones. A series of the Pzkpfw II succeeding those of the g type were produced until those of the L type appeared. However, respective numbers of the Pzkpfw II of types produced were all small. It is true that judged by the current standard, these Pzkpfw II look quite inferior both in fire and defensive powers. But when compared with those of other countries active at the time, the Pzkpfw II should be ranked as by far the most superior one. Indeed, its nimble mobility matching well with the German application was the driving force of the spectacular victory won by the Germans at the initial period of the World War II.   Warning! Not suitable for children under 14 years.

1/35 Ger. Panther Ausf.D

Military model vehicles 1:35

1/35 Ger. Panther Ausf.D

300035345

€59.99

Article number: 300035345 Procuct: 1/35 Ger. Panther Ausf.D The latest addition to the 1/35 Military Miniature Series depicts the German Panther, a WWII AFV developed by Germany to combat the mighty Russian T-34. Given the importance of stopping the T-34 as the Russians turned the tide in WWII, the Panther was a priority and this was emphasized by armored warfare guru Heinz Guderian's role in the design process. The Panther packed a powerful L/70 7.5cm gun (rumored to have taken out a T-34 at 3km) and combined it with excellent mobility and a 55km/h top speed. Just as importantly, it made great use of T-34-inspired sloped armor, up to 80mm in places. As things turned out, development of the Panther was rushed as the German situation worsened, and this led to severe reliability problems in engagements such as the Battle of Kursk in July 1943. Despite that, it proved offensively and defensively highly capable. The Ausf.D was the initial variant of the Panther; 842 were manufactured between January and September 1943. About the Model • This is a 1/35 scale plastic model assembly kit. • This completely newly-tooled kit captures the form of the Panther Ausf.D with sloped armor, and long 7.5cm gun. Tamiya designers studied a real Panther in the Netherlands to ensure stunning accuracy. • Ausf.D-specific features such as smoke dischargers and rear panel layout are authentically depicted. • Advanced slide molding techniques ensure that turret details are accurately rendered. • Belt type tracks give an effective finish and make for a smooth assembly process. • Commander torso figure plus full body crew figure included. 3 marking options include Battle of Kursk unit. • Three detail-up parts sets are available to further enhance the realism of your model.   Warning! Not suitable for children under 14 years.

1/35 Sherman Easy8 EuroTheater

Military model vehicles 1:35

1/35 Sherman Easy8 EuroTheater

300035346

€52.99

Article number: 300035346 Product: 1/35 Sherman Easy8 EuroTheater This is an all-new kit designed by Tamiya's top designers which recreates the "Easy Eight" variant of the legendary Sherman medium tank. The M4A3E8 was known fondly as the "Easy Eight" by its crews, thanks to the relatively smooth drive afforded by its Horizontal Volute Spring Suspension (HVSS). Another distinguishing feature was its 76mm gun. Some of the 2,500 examples produced were in time to appear in the Battle of the Bulge (Dec. 1944-Jan. 1945), and others even served in the Korean War years after the Allied WWII triumph. Movie buffs will no doubt also recall that the "Easy Eight" was the star of the 2014 hit film "Fury." THE TAMIYA-DESIGNED M4A3E8 KEY FEATURES Slide molded turret and upper hull parts give an unbeatable combination of hassle-free assembly and highly realistic detail levels. Cast metal turret and welded hull surface textures are rendered accurately. The rear showcases sharp, detailed molding on engine grilles and exhausts, as well as the numerous accessories depicted by the kit. Clear parts are used to recreate light lens and cupola vision block parts, further upping the realism of this kit. The single-pin T66 tracks are recreated with minimum fuss and great accuracy, by the included belt-type tracks. Drive sprockets feature fine holes. A commander figure in realistic pose is provided for the cupola. The periscope seen on the hatch underside is depicted using separate parts. Technical data: Scale: 1/35 Length: 214 mm Width: 86 mm   Warning! Not suitable for children under 14 years.

1:35 Bundeswehr Leopard 2A6 (3)

Military model vehicles 1:35

1:35 Bundeswehr Leopard 2A6 (3)

300035271

€63.99

Article number: 300035271 Product: 1/35 Bundeswehr Leopard 2A6 (3) The latest upgrade to the Leopard 2 is a newly designed 55 caliber 120mm smooth bore main gun. Measuring 1.3m longer than the 44 caliber main gun of its predecessor, the Leopard 2 A5, the new gun of the 2 A6 provides higher projectile velocity for increased range and penetration. The 2 A6 retains improvements made to previous Leopard 2 tanks including wedge shaped spaced armor effective against chemical weapons and improved electric gun control and stabilization system. The use of the 2 A6 continues to spread throughout Europe with the Netherlands, Spain and Greece adopting the 2 A6 as their main battle tank. About the Model 1/35 scale plastic assembly kit. Overall length: 314mm Accurately reproduced long 55 caliber 120mm smoothbore main gun adds to sense of power. 2 newly designed half body figures (commander and loader) included in kit. Goggles for figures, headlights and taillights reproduced using transparent parts. Kit features extra road signs for reproduction of realistic diorama. Includes decals to reproduce up to 4 different types of markings, including NATO versions used in Kosovo.   Warning! Not suitable for children under 14 years.

1:35 BW MBT Leopard 1A4 (1)

Military model vehicles 1:35

1:35 BW MBT Leopard 1A4 (1)

300035112

€23.99

Article number: 300035112 Product: 1:35 BW MBT Leopard 1A4 (1) This is a 1/35 scale plastic model assembly kit recreating the Leopard A4 which began production in 1974. ★ From the spaced armor to the 105mm gun, the powerful form of the tank is captured in style. ★ Notable details include the MG3 machine gun and searchlight. ★ Comes with a commander figure to add even more detail to your finished model. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4)

Military model vehicles 1:35

1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4)

300035035

€7.19

Article number: 300035035 Product: 1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4) This is a 1/35 scale plastic model assembly kit depicting the 37mm Pak35/36 anti-tank gun deployed by German WWII forces. ★The gun is comprised of numerous parts for an authentic look. It offers elevation and traverse movement. ★Choose between standard and late-war barrels. ★Comes with various accessories and four figures as a mini-diorama in its own right.   Warning! Not suitable for children under 14 years.

1:35 Ger. Kingtiger Ardennen Fro. (3)

Military model vehicles 1:35

1:35 Ger. Kingtiger Ardennen Fro. (3)

300035252

€59.99

Article number: 300035252 Product: 1:35 Ger. Kingtiger Ardennen Fro. (3) Development of the massive King Tiger began in February 1943 to counter the increasing threat of Russian Tanks. A more powerful cannon was added, upgrading from the L56, 88mm of the Tiger I to the Type 43 L71, 88mm high velocity gun. The chassis front armor was 150mm thick with 80mm thick side armor. The Henschel and Porsche companies came up with rival turret prototypes. After the trial production of 50 tanks with the Porsche turret, the Henschel design, with its extremely thick armor that measured 185mm on the front and 88mm on the side panels, was adopted for mass production. The Henschel turret itself was revised mid-way through production, from a stepped gun mantle to a smooth one. Due to the havoc wreaked by the King Tiger I during the final German offensive on the Ardennes front in December of 1944, the Allied forces that moved in on Berlin would fear the King Tiger up until the very last day of the war. As for the DKW NZ350 military motorcycle, production began in 1940. However, this German military motorcycle experienced mid-production changes when resources became limited towards the end of the war. DKW NZ350s at that time were seen with smaller headlights and thinned-out fenders. About the Model ★Tamiya presents a 1/35 scale model of the German King Tiger as it appeared during the final German offensive in the Ardennes Forest of Belgium. ★Total length: 294mm, total width: 108mm. ★>Henschel design turret recreated in superb detail. ★Kit includes parts for two different types of gun mantles- stepped and smooth. ★Turret's rear escape hatch can be opened and closed after assembly. All other hatches can be assembled in the open or closed positions. ★Kit includes DKW NZ350 German Military Motorcycle recreated as it appeared during the latter stages of World War II with smaller headlight and thinned-out fender. ★Three figures included: Tank commander and orderly wearing leather jackets, and tank crewman.   Warning! Not suitable for children under 14 years.

1:35 Hummel (Late Production) (3)

Military model vehicles 1:35

1:35 Hummel (Late Production) (3)

300035367

€60.99

Article number: 300035367 Product: 1/35 Hummel (Late Production) Catch the Buzz! The Hummel was developed by German designers in short time, intended to provide a quick boost for troops that had begun to struggle in the aftermath of their invasion of the Soviet Union in 1941. Its chassis was a hybrid using parts from the Pz.Kpfw.III and IV, and the gun was the powerful sFH18/1 15cm piece that fired 43.5kg howitzer rounds distances up to and over 13 kilometers. Hummels joined the fray from 1943 in the showdown Battle of Kursk, and served through the second half of WWII. About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 190mm, width: 84mm. ★The model authentically captures the Hummel form with thin fighting compartment armor and late production integrated driving compartment. ★Features coordinated sight and 15cm howitzer elevation. ★Assembly type late production tracks feature one-piece straight sections for realistic depiction of upper run "sag." ★Includes 3 figures depicted in the act of loading shells. ★Comes with 2 marking options, for Eastern and Western Front vehicles.

1:35 US 2.5to Cargo Truck (1)

Military model vehicles 1:35

1:35 US 2.5to Cargo Truck (1)

300035218

€43.99

Article number: 300035218 Product: 1:35 US 2.5to Cargo Truck (1) During WWII, over 800,000 2 1/2-ton 6x6 cargo trucks were produced and became a symbol of the American victory along with the Sherman tank and the Jeep. Among them was a troop carrier of which approximately 57,000 units were made. This is a plastic assembly model kit of one such truck. The highly durable and tough form has been precisely reproduced. Features such as the robust suspension and the split type differential have a rich detailed finish. The model depicts the doors which had canvas parts and its cargo area with the covers removed to allow you to recreate a commonly seen scene of WWII. Five kinds of markings and a seated driver figure are included.   Warning! Not suitable for children under 14 years.

1:35 US M113A2 Personal Carr. Desert (2)

Military model vehicles 1:35

1:35 US M113A2 Personal Carr. Desert (2)

300035265

€41.99

Article number: 300035265 Product: 1:35 US M113A2 Personal Carr. Desert (2) About the U.S. M113A2 Armored Personnel Carrier Desert Version Of the various M113 type personnel carriers developed, the M113A2 began production in June 1979. Based on combat experience in Vietnam, this version was made with improved transmission, operating equipment and cooling system as well as reinforced suspension. Detachable fuel tanks were moved to the rear and external sides of the vehicle, smoke dischargers were mounted on the front, and the trim vane was enlarged. M113A2 units were deployed to the Gulf War in 1991, and in the 2003 Iraq War. M113A2s active in Iraq were also equipped with Combat Identification Panels (CIP), the latest friend and foe recognition device to prevent friendly attack. About the Model ★Overall length 153mm ★Large trim vane, smoke shell launcher, and external fuel tanks have been accurately replicated. ★CIP attached on both sides. ★Gun shield can be attached to M2 machine gun. ★Plenty of extra attachments including personnel equipment and ammo cases. ★Commander and driver figures included Decals for 3 different vehicles deployed to Iraq and one vehicle deployed to Bosnia-Herzegovina.   Warning! Not suitable for children under 14 years.

1:35 WWII Ger.SdKfz.171 Panther A (2)

Military model vehicles 1:35

1:35 WWII Ger.SdKfz.171 Panther A (2)

300035065

€21.99

Article number: 300035065 Product: 1/35 WWII Dt. SdKfz.171 Panther A (2) In the beginning of 1942, in order to fight against the T-34, the German military ordered a new tank from Dymler-Benz and M.A.N. companies with the following specifications: Weight- 35 tons; speed- 60 km/h; armament 75mm long gun and armour, 60mm thick in front hull, 35mm thick in the rear and 100 mm at the front of the gun turret. Lastly, it was specified that the tank be equipped with a Maiback HL210, water-cooled, V-type 12 cylinder engine. In May of the same year, M.A.N.'s model was chosen without waiting for completion of a prototype tank. However, there were 2 important modifications. First, in order to meet the military's demand, considerably more than the original 35 ton weight was needed. Second, the military ordered a change in the thickness of the frontal armour from 60mm to 80mm. Because of these changes, the engine type had to be chanded from HL210 to HL230. Then, in order to accommodate this engine, a much better gear was needed, but mass production began without this last change, which resulted in frequent gear malfunctions and related trouble. This became the Panther's greatest defect. In the same year, Dymler-Benz and Henschel were ordered to produce the Panther. Therefore, production was greatly increased and a total of 6283 Panther Tanks were produced, second only to P2KW-4 in number. The first mass produced Panther type D was not equipped with a machine gun but after the experience of close battle. A 7.92mm MG 34 was added to the Panther's right front hull armament beginning with its type A. The special feature of the Panther was the left and right driving mechanism. This created an interchangeability of movements, using the torsion bar system. By 1944, the Panther was further improved from Type A to Type G with a change in its side shape. The Panther continued its activities against the Allied Forces throughout the latter half of the war. One of the famed battles it waged during this latter period probably is the one against the new Soviet JS II heavy tank on the eastern front. The Panther at that time, was the main strength tank of the Gross Deutschland, the strongest German Mechanized Division, under the command of General Hasso Von Manteuffel. The Panther reportedly destroyed 350 JS II tanks and 20 other armoured vehicles in the battle. It was a complete one-sided victory for the Panther and one for the book of military history. The Panther, therefore, was an extremely balanced tactical tank and should be called a masterpiece destined to bear the last glory of German war technology. It's glorious name will forever remain in the records of the 2nd World War. Since 1943, during World War II, thee appeared an unusually fast tank on the European Front that silhoueted among its German Mechanized Division. This was the "Panther" medium tank, with its formidable power of attack and fast maneuverability, that soon became an object of terror to men of the Allied Forces. If put to a question, "Which was the best German tank during the war?" The majority of the people, without hesitation will answer the name "Panther". It is known that the PZKW-IV and the Tiger-II tanks were also produced by German technology and were both outstanding tanks. But the PZKW-IV was meant to be replaced by the Panther, and the Panther, showing improved attacking and defensive powers and accurate maneuver ability on the field, soon became the German's main strength tank. The Tiger I with its 88mm gun would seem at first to be superior to the Panther's 75mm gun in attacking power. But when viewed from the point of armour piercing power of the shell, the Panther, with its 70 caliber KWK 42 anti tank gun and sloping side armour provided much stronger in actual fighting than the Tiger I's 56 caliber KWK 36 anti tank gun with vertival side armour. The Tiger II tank, which should be called the 'improved Panther' was much stronger in attacking and defensive power than the Panther. However, considering the number of Panthers produced and used during this time, the Panther tank was still number 1. The main strength German tanks at the start of the war were all unique in the sense that their designs were completely based on German plans and ideas. But the Panther was influenced by the Soviet masterpiece tank T-34 which was seen for the first time on the east European Front. Ger. Panther Med. Tank   Warning! Not suitable for children under 14 years.

Marder II

Military model vehicles 1:35

Marder II

300035060

€27.49

MARDER II S.P. GUN

1/35 Brummbaer Late Production

Military model vehicles 1:35

1/35 Brummbaer Late Production

300035353

€56.99

Article number: 300035353 Product: 1/35 Brummbaer Late Production The Brummbär is a 15cm howitzer-toting assault tank (Sturmpanzer). It was built on the reliable and versatile Pz.Kpfw. IV chassis. It was ordered by Hitler himself, and produced in various incarnations from April 1943 to March 1945. The most numerous was the late production variant depicted by this model. It used the Pz.Kpfw. IV Ausf.J chassis and had a simplified boxy fighting compartment with an extrusion on the top-left to house a machine gun. In a losing battle, its dedicated Assault Tank Battalions fought in Hungary and the former Czechoslovakia.   Warning! Not suitable for children under 14 years.

1/48 Heavy Tractor SS-100

Military model vehicles 1:48

1/48 Heavy Tractor SS-100

300032593

€25.99

Article number: 300032593 Product: 1/48 Heavy Tractor SS-100 This scale model recreates the SS-100, which was a veritable workhorse for German forces during WWII. Powered by a 100hp 8,553cc diesel, it was based upon a civilian vehicle design and could pull loads of up to 20 tons. The SS-100 was put to work towing all sorts of subjects including artillery pieces, aircraft, and even V2 rockets, as well as recovering broken down vehicles.   Warning! Not suitable for children under 14 years.

1:35 British MBT Chieftain MK.5 (3)

Military model vehicles 1:35

1:35 British MBT Chieftain MK.5 (3)

300035068

€25.99

  Warning! Not suitable for children under 14 years.

1:35 Ger. Battle Tank IV F L24/75mm

Military model vehicles 1:35

1:35 Ger. Battle Tank IV F L24/75mm

300035374

€53.99

Article number: 300035374 Product: 1:35 Ger. Battle Tank IV F L24/75mm Germany’s Pz.Kpfw.IV was a stalwart of the WWII effort, serving from start to finish of the conflict. Manufacture began in 1936 with the Ausf.A, and went through a number of specifications before what was perhaps the definitive short barrelled variant started production in 1941: the Ausf. F. It had reinforced armor and updated hull designs, as well as an L/24 75mm gun. Around 460 rolled off of the production lines, serving on the Eastern front as Nazi Germany grappled with the Soviet Union, and in North Africa. About the Model • This is a 1/35 scale plastic model assembly kit. • In-depth research at the German Tank Museum in Munster contributed to this highly accurate kit, which features brand new parts across the board (only the lower hull and wheels are existing designs).

1:35 Ger. Krupp Protze w/ 37mm PAK (4)

Military model vehicles 1:35

1:35 Ger. Krupp Protze w/ 37mm PAK (4)

300035259

€39.99

Article number: 300035259 Product: 1:35 Ger. Krupp Protze w/ 37mm PAK (4) About Krupp Protze 1ton (6X4) Towing Truck w/3.7cm Pak Popularly known as the "Boxer" because of its air-cooled flat-four square 4-cylinder engine, the L2 H43 was developed by the Krupp company and mass produced from 1933. This truck was capable of both personnel and light-artillery transport and featured unique 6x4 independent suspension with 4-wheel drive and was capable of speeds up to 70km/h. In 1936, this truck had its horse-power improved from 55hp to 60hp with the development of the L2H431 version. This latter version underwent various improvements, particularly those allowing it to tow a 3.7mm PAK 35/36 anti-tank gun. After this improvement, the L2H431 came to be known as the Protze, and could hold 1 driver and 5 artillery crew. From the start of WWII the Protze was employed as standard equipment in anti-tank artillery divisions and was actively deployed to battlefronts in France and Poland. About the Model ★1/35 scale ★Overall length: 250mm ★Every characteristic of this truck such as the low-profile bonnet, the chassis, the ammunition boxes and the crew seats on the rear part, as well as the spare wheel for the anti-tank gun has been realistically reproduced. ★A 3.7cm Pak anti-tank gun and various accessories are part of the set. ★4 all-new figures and decals for 4 different markings are included.   Warning! Not suitable for children under 14 years.

1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1)

Military model vehicles 1:35

1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1)

300035213

€17.99

Article number: 300035213 Product: 1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1) The highly reliable, compact Kübelwagen Type 82, which served as transportation for high ranking German officers throughout WWII, now comes realized as a plastic assembly model kit. ★The model realistically captures the functional form of this mass produced car. ★The plain constitution of the press-lined body as well as the suspension arms, under guards, suspension area, and interior details such as the instrument panel and pedals all feature a realistic finish. ★You may choose to assemble all four doors in either open or closed positions. ★A figure depicting a driver in a relaxed pose is included.   Warning! Not suitable for children under 14 years.

1:35 Ger. SdKfz.171 Panther G Late V.(2)

Military model vehicles 1:35

1:35 Ger. SdKfz.171 Panther G Late V.(2)

300035176

€46.99

Article number: 300035176 Product: 1:35 Ger. SdKfz.171 Panther G Late V.(2) A constant threat on account of its refined design, the Panther was a feared opponent for enemies of the German Army. In fact, a number of Panther variants were produced and perhaps the most refined was the late version of the Type G, which is recreated by this plastic model assembly kit. The model breathtakingly recreates the form of the tank, from the well-armored mantlet to the exhaust flame dampers for night combat, and right down to details such as the heater air intake. Of course, typical late production variant additions such as turret-top parts are all there, as are 2 figures in realistic pose, plus 3 marking options recreating Ardennes Front unit Panthers. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

1:35 Ger. SdKfz.173 Jagdpanther Late.(1)

Military model vehicles 1:35

1:35 Ger. SdKfz.173 Jagdpanther Late.(1)

300035203

€39.99

Article number: 300035203 Product: 1:35 Ger. SdKfz.173 Jagdpanther Late.(1) The German tank destroyer Jagdpanther used the proven Panther medium tank chassis fitted with a fixed fighting compartment and a powerful 88mm gun. A late production variant of the Jagdpanther now comes as a 1/35 scale plastic assembly kit model. You can choose to assemble a Jagdpanther produced from May to December 1944 or from December 1944 onwards. The fighting compartment interior features superb details including the main gun loading part, bulkhead, and commander's seat. Movable escape hatch as well as open/closed selectable hatches provides the model with a greater presence. Kit includes parts to depict die-cast type exhausts as well as exhausts with flame dampers. A commander figure is also included.   Warning! Not suitable for children under 14 years.

1:35 Ger. Sturmgeschütz III B (1) StuG.

Military model vehicles 1:35

1:35 Ger. Sturmgeschütz III B (1) StuG.

300035281

€52.99

Article number: 300035281 Product: 1/35 WWII Ger.Sturmgeschütz III B (1) Germanys versatile Stug III was originally designed as an assault weapon, however also came to be used as a weapon of defense as the war progressed, providing both assault gun and anti-tank support. Based on the durable Panzer III chassis, the Stug III featured a monoblock structure with an L24 75mm short barreled gun mounted directly to the hull, eliminating the revolving turret and reducing overall height. The Ausf. B was the first truly mass produced Stug III with 250 produced from June 1940. Featuring wide tracks and powered by a 230hp Maybach HL 120 TRM engine the Ausf. B boasted a top speed of 40km/h. The Ausf. B saw action during the Balkans campaign in April 1941 and Operation Barbarossa in June, 1941. The simple construction leading to low costs and easy mass production made the Stug III one of Germanys most produced armored vehicles with over 10,000 produced during WWII.

1:35 Ger.Tank Destroyer Jagdtiger Ea(2)

Military model vehicles 1:35

1:35 Ger.Tank Destroyer Jagdtiger Ea(2)

300035295

€82.99

Article number: 300035295 Product: 1:35 Ger.Tank Destroyer Jagdtiger Ea(2) During the later stages of WWII, the heavy tank destroyer Jadgtiger (which weighed in excess of 70 tons and had an impressive 12.8cm gun and thick armor) was the heaviest tank seen on both the eastern and western fronts. Tamiya is releasing this 1/35 scale Jagdtiger after its first release 33 years ago in commemoration of the 40th year anniversary of the 1/35 Military Miniature series. Lining this Jagdtiger up with other 1/35 scale tanks like the German King Tiger Production Turret (35164), German King Tiger Porsche Turret (35169), German Tank Destroyer Jagdpanther Late Version (35203), German King Tiger (Ardennes Front) (35252), and German Tank Destroyer Hetzer Mid Production (35285) would make for an imposing display. •Completely new design. •Interior details such as the gun breach area and the floor boards are reproduced. •Commander and driver torso figures included. •5 kinds of markings for the 653rd Heavy Tank Battalion included. •Along with its extended hull, the spare track link racks and jack are also realistically reproduced. •The separately molded disc parts of the road wheels add extra depth to the model. •Two kinds of tracks are included; easy to assemble belt type and connectible assembly type. •A choice of stowed or extended traveling clamps. •Photo-etched parts for the engine intake protective net included.   Warning! Not suitable for children under 14 years.

1:35 Isreali MBT Merkava (1)

Military model vehicles 1:35

1:35 Isreali MBT Merkava (1)

300035127

€28.49

Article number: 300035127 Product: 1:35 Isreali MBT Merkava (1) Thanks to its manhandling of the Syrian-operated Soviet T-72 during the 1982 Lebanon War, the Merkava became a well-known and feared presence. This precision plastic model assembly kit recreates the Merkava, breathtakingly capturing its form including angled spaced armor across the hull and wedge-shaped cast turret with 105mm rifled gun. Details such as the thermal cover, side skirts, machine gun and more are depicted with aplomb. A commander figure is also included. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

1:35 Jap. Med.Tank Type 97 Chi-Ha (2)

Military model vehicles 1:35

1:35 Jap. Med.Tank Type 97 Chi-Ha (2)

300035075

€18.99

Article number: 300035075 Product: 1:35 Jap. Med.Tank Type 97 Chi-Ha (2) This is a 1/35 scale plastic model assembly kit depicting the Type 97 tank fielded by Imperial Japanese Forces in the Pacific War. ★ From the riveted armor to the short 57mm barreled gun, the form of the tank is captured in style. ★ Features a removable engine room grille, with depiction of oil cooler underneath. ★ Comes with one full body and one torso figure, plus no fewer than six marking options. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

1:35 M1A1 Abrams Ukraine

Military model vehicles 1:35

1:35 M1A1 Abrams Ukraine

300025216

€35.99

Assembly model kit 1/35th scale, Special Version of the Tamiya kit 35156, new painting guide

1:35 US Med.MBT M48A3 Patton (2)

Military model vehicles 1:35

1:35 US Med.MBT M48A3 Patton (2)

300035120

€27.99

Article number: 300035120 Product: 1:35 US Med.MBT M48A3 Patton (2) This is a 1/35 scale plastic model kit of the American M48A3 Patton tank, which served with distinction during the Vietnam War. ★The tough appearance of the tank, including its cast metal surface texture and canvas section of the gun mantlet is accurately reproduced. ★Details such as the searchlight and machine gun cupola are also brimming with realism. ★The kit includes accessory parts such as an engine exhaust snorkel, jerry cans, and spare track links as well as 2 tank crew figures.

1:35 US Tank M41 Walker Bulldog (3)

Military model vehicles 1:35

1:35 US Tank M41 Walker Bulldog (3)

300035055

€19.49

Article number: 300035055 Product: 1:35 US Panzer M41 Walker Bulldog (3) This is a 1/35 scale plastic model assembly kit depicting the M41 Walker Bulldog. ★The compact form of the 72mm gun-toting M41 is captured in style. ★From accurate surface textures to depictions of weld lines, there is plenty of detail. ★Comes with decals to depict either a U.S. or a Japan Ground Self Defense Force vehicle. ★Includes a commander figure and two soldiers to add further life to your model.   Warning! Not suitable for children under 14 years.

1:48 Ger. PzKpfw. 38(t) Ausf.E/F

Military model vehicles 1:48

1:48 Ger. PzKpfw. 38(t) Ausf.E/F

300032583

€22.49

Article number: 300032583 Product: 1:48 WWII PzKpfw. 38(t) Ausf. E/F This is a model of the German light tank 38(t) in 1/48 scale. The 38(t) was designed and entered production for the Czechoslovak Army as the LT vz. 38, however before any could be delivered Germany occupied then divided the country. They rated the tank highly, ordering continued production of the initial lot of 150, renaming it the 38(t) with (t) denoting its Czech origin. It went on to serve as the front-line tank for the Wehrmacht in early WWII, from the initial operations in Poland up to and including Operation Barbarossa, the invasion of the Soviet Union in June 1941. It wielded a 37mm gun with 90 rounds on board, a coaxial 7.92mm MG37(t) machine gun, and another MG37 on the front left of the vehicle. 42km/h was squeezed out of the 6-cylinder engine. Ausf.E/F 38(t) variants featured doubled front armor thickness at 50mm, with 30mm on the hull and turret sides. 525 were produced in the period from November 1940 to October 1941.   Warning! Not suitable for children under 14 years.

1:48 Ger. Tiger I Late Prod.(Tentative)

Military model vehicles 1:48

1:48 Ger. Tiger I Late Prod.(Tentative)

300032575

€33.99

Article number: 300032575 Product: 1/48 Germ. Tiger I Late Prod.(Tentative) The German Tiger I Tank featured a powerful 88mm gun as well as excellent armor and was the greatest opponent to Allied forces during WWII. The late production version incorporated large steel road wheels with built-in rubber rings and an overhauled turret with periscope in front of the loader's hatch, the commander's viewport replaced by seven individual periscopes, and ventilators moved to the center for improved efficiency. Tamiya now brings this iconic kit, previously only available in 1/35 scale, to the 1/48 Military Miniature Collection series line-up.   Warning! Not suitable for children under 14 years.

1/35 Ger.Pioneer & Goliath Set

Military model vehicles 1:35

1/35 Ger.Pioneer & Goliath Set

300035357

€19.29

Article number: 300035357 Product: 1/35 Ger.Pioneer & Goliath Set This 1/35 scale model recreates the Goliath. It was a diminutive tracked vehicle about 1.5m long that could carry up to 60kg of light explosives and was remotely controlled via 3 cables that spooled out of its rear. Some 7,564 were produced in all, split between 12V battery and gas engine-powered variants. They were largely deployed by assault pioneer (Sturmpionier) units, and were hoped to give the advantage of surprise. They were used on all fronts including German counters to the allied invasions in Normandy.

1/35 M3 Stuart Late Production

Military model vehicles 1:35

1/35 M3 Stuart Late Production

300035360

€40.99

Article number: 300035360 Product: 1:35 US M3 Stuart Späte Produktion This 1/35 scale model faithfully depicts the M3 Stuart tank. It is a complete new kit with updated details compared to the Stuart model that has been offered for decades. The M3 Stuart was manufactured from March 1943 onwards and deployed not only by U.S. forces; it also saw action in Soviet colors. The late production variant of the tank had a rounded turret design with the cupola removed. It used a 37mm main gun, with numerous 7.62mm machine guns: one coaxial to the main gun, one on the front, on the turret and in the side sponson’s on certain variants.

1/35 US M10 Mid Production

Military model vehicles 1:35

1/35 US M10 Mid Production

300035350

€52.99

Article number: 300035350 Product: 1/35 US M10 Mid Production This is a model of the famed M10 Tank Destroyer, a subject also covered in the 1/48 scale Military Miniature series. This largely newly-tooled model (only machine gun and clear parts are taken over from existing models) gives it the glorious detail of the larger 1/35 scale. The astonishing success of German armor tactics in 1940 prompted U.S. forces to adopt a doctrine requiring dedicated new tank destroyers to counter them. After going down a few different design routes at the start of the process, they eventually hit upon the highly successful M10 design with well-sloped (if rather thin, to keep the vehicle light and maneuverable) armor plate, and the highly capable 3-inch (76.2mm) gun. Over 4,900 were produced, and took part in Operation Torch (the invasion of N. Africa), as well as fighting in Italy and the advance upon Germany that would bring the exhausting conflict to a close. About the model 1/35 scale plastic model assembly kit. Length: 196mm, width: 88mm. Intensive study and measurement of the M10 in the tank museum at Saumur led to this highly detailed depiction of its form complete with sloped armor, right down to auxiliary armor bosses. The open top on the distinctive turret allows viewing of the 3-inch gun breech and realistic interior. Compare and contrast depictions of surface textures such as the cast mantlet and differential cover versus the welded armor plate of the turret sides and upper hull. Belt-type parts recreate T51 tracks. Driver's hatch can be attached in open or closed position, and features periscope depiction. Comes with 3 figures (commander, loader, gunner) in realistic pose, plus 2 marking options for recreating M10s belonging to the 601st and 634th U.S. Tank Destroyer Battalions   Warning! Not suitable for children under 14 years.

1:35 Brit. Tank Comet A34

Military model vehicles 1:35

1:35 Brit. Tank Comet A34

300035380

€52.99

Article number: 300035380 Product: 1:35 Brit. Tank Comet A34 Tamiya is proud to welcome the Comet to the 1/35 Military Miniature Series for the first time! At the end of WWII, the British Army developed the Comet – which became a base of later British Army tanks such as the Centurion - as a counter for the powerful German Tiger and Panther tanks. With the hull design based upon the structure of the existing armored cruiser tank Cromwell, the Comet employed a larger turret with a powerful 17-pounder gun. The Comet first saw action in the Operation Varsity in March 1945, and around 900 including ones produced after WWII were built.   Warning! Not suitable for children under 14 years.

New
1:35 Bundeswehr MBT Leopard 1 (1)

Military model vehicles 1:35

1:35 Bundeswehr MBT Leopard 1 (1)

300035064

€23.49

  Warning! Not suitable for children under 14 years.

1:35 Etchedparts Leopard 2A6 35271/25207

Military model vehicles 1:35

1:35 Etchedparts Leopard 2A6 35271/25207

300035272

€9.99

Leopard 2 A5/A6 PE Parts Set

1:35 Ger. 20mm Flakvierling 38

Military model vehicles 1:35

1:35 Ger. 20mm Flakvierling 38

300035091

€7.79

Article number: 300035091 Product: 1:35 Ger. 20mm Flakvierling 38 Shooting an impressive 600 rounds per minute and greatly feared by Allied pilots was the German 20mm Flakvierling 38 MITSd.Ah.52 which is now recreated as a plastic assembly model kit. Although its purpose was to provide aerial defense against Allied aircraft attack from a grounded position, it was also seen used with trucks and other land vehicles as well on warships. Features of the model including the skyward aimed gun barrels, ammunition cartridges, operating handles, pedals etc. have all been realistically reproduced. The gun barrels along with its gun sight offer elevation and traverse. Also included with the set is a trailer to allow you the choice of assembling the Flakvierling 38 in transport or being fired. Ger. 2cm Flakvierling 38   Warning! Not suitable for children under 14 years.

1:35 Ger. 38to Tank Destr. Hetzer (1)

Military model vehicles 1:35

1:35 Ger. 38to Tank Destr. Hetzer (1)

300035285

€56.99

Article number: 300035285 Product: 1:35 Ger. 38to Tank Destr. Hetzer (1) Already available as a 1/48 scale MM series kit, Tamiya now responds to the requests of military modellers and announces the release of the German Tank Destroyer Hetzer Mid Production in the 1/35 scale. About the Hetzer In 1943, the German high command ordered development of a new purpose-built tank destroyer to replace all of the interim vehicles like the Marder, and the Hetzer was quickly created to meet this requirement. Based on the Panzerkampfwagen 38(t), the Hetzer housed a crew of 4 in its low, compact hull. It was armed with a powerful Pak 39 L/48 75mm gun in a fixed mounting and featured sloped armor for enhanced protection. 2,584 were produced by May of 1945, and modifications were continually added during production, leading to differences between early, mid, and late production models. About the model •High-quality 1/35 scale assembly kit model of the mid production Jagdpanzer 38(t) Hetzer. •Brand new moldings with new details such as the remote control MG34 machine gun mount on the top of the hull and periscopic binoculars. •Includes both belt type and assembly type caterpillar tracks for more modeling options. •Accessory parts such as a jack and other tools add lifelike detail to the hull. •1 tank crew figure in realistic standing pose included. •4 types of markings also included.   Warning! Not suitable for children under 14 years.

1:35 Ger. Jagdpanzer IV/70 (V) Lang

Military model vehicles 1:35

1:35 Ger. Jagdpanzer IV/70 (V) Lang

300035340

€59.99

Article number: 300035340 Product: 1:35 Ger. Jagdpanzer IV/70 (V) Lang This is a completely new model of the fearsome German tank destroyer Jagdpanzer IV Lang. It is designed from the ground up to be part of the long catalog of models offered in the Tamiya 1/35 scale line up of model kits. The original Jagdpanzer IV tank destroyer was based upon the Panzer IV vehicle and used extensive sloped armor with the 48-caliber 7.5cm gun that had already proven its worth on other vehicles. In January 1944, it was decided to upgrade the Jagdpanzer IV, with the powerful 70-caliber 7.5cm anti-tank gun installed in place of the original 48-caliber weapon. This bigger gun was fitted to the Jadgpanzer IV with the intention of giving it the ability to destroy Allied tanks without even entering their weapons range. It was also the origin of the name Lang, which translates into English as "long". The (V) was applied to vehicles manufactured by the German company Vomag. 930 Jagdpanzer IV /70(V) Lang vehicles were manufactured between August 1944 and March 1945, with German forces taking advantage of the exceptional range of the gun, employing it in both defensive and ambush roles even as their military situation worsened. December 2014 marks 70 years since the Battle of the Bulge, which was effectively the final German offensive of WWII. This model is perfect and right on time to liven up late Second World War dioramas.   Warning! Not suitable for children under 14 years.

1:35 Ger. Marder III M Normandy

Military model vehicles 1:35

1:35 Ger. Marder III M Normandy

300035364

€48.99

Article number: 300035364 Product: 1:35 Ger. Marder III M Normandy About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 149.5mm, width: 61mm. ★The distinctive, compact form of the AFV is captured with aplomb. ★Detailed interior really catches the eye. ★Assembly type tracks feature single piece straight sections. ★12 depictions of shells are included, and can be stowed in the rack. ★Features a photo-etched part to capture the muffler cover. ★Includes four full body figures and one torso, plus two marking options.

1:35 Ger. PzKpfw. III Ausf. L (1)

Military model vehicles 1:35

1:35 Ger. PzKpfw. III Ausf. L (1)

300035215

€43.99

Article number: 300035215 Product: 1:35 Ger. PzKpfw. III Ausf. L (1) From the beginning and through to the middle stages of WWII, the Pz.Kpfw.IIIs along with the Pz.Kpfw.IVs were the core tanks used by German tank divisions. Each variant of the Pz.Kpfw.III including the Ausf.L was highly reliable, came armed with a long barreled 60 caliber 50mm gun and had reinforced armor. This is a 1/35 scale plastic assembly model kit of one such Ausf.L tank. Famous characteristics of the Ausf.L which include the driver's front panel and main gun mantlet have been realistically reproduced. The fighting compartment loading area, turret interior, and commander’s seat have been reproduced. You can also choose to assemble each hatch in either open or closed positions. Accessory parts seen on the hull such as spare tracks and tools feature a precise finish. A tank commander figure is included.   Warning! Not suitable for children under 14 years.

1:35 Ger. PzKpfw.IV Aus.F w/Motorc. DAK

Military model vehicles 1:35

1:35 Ger. PzKpfw.IV Aus.F w/Motorc. DAK

300025208

€50.99

Assembly kit, 1/35th scale, limited Set, paints and cement are separate required

1:35 Ger. Sd.Kfz.2 Kettenkrad (Mid.Pro.)

Military model vehicles 1:35

1:35 Ger. Sd.Kfz.2 Kettenkrad (Mid.Pro.)

300035377

€27.49

1:35 Ger. SdKfz.161/2 Panzer IV J (1)

Military model vehicles 1:35

1:35 Ger. SdKfz.161/2 Panzer IV J (1)

300035181

€47.99

Article number: 300035181 Product: 1:35 Ger. SdKfz.161/2 Panzer IV J (1) For a single base tank design to fight through the entirety of WWII was something of a rarity, but the Panzerkampfwagen IV proved its enduring efficacy by doing just that. This precision plastic model depicts the Ausf.J variant of the rustic tank, which toted a 75mm gun and the distinctive "Schürzen" armor additions. Modelers can assemble the kit with open or closed hatches and brake maintence panel, and are also given the choice between cast metal and tubing idler wheels for the complex suspension. Additionally, the kit features belt type tracks and a realistic commander figure. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

1:35 Ger. SdKfz.163 Sturmgeschütz IV (1)

Military model vehicles 1:35

1:35 Ger. SdKfz.163 Sturmgeschütz IV (1)

300035087

€23.99

Article number: 300035087 Product: 1:35 Ger. SdKfz.163 Sturmgeschütz IV (1) This is a 1/35 scale plastic model assembly kit recreating the 75mm gun-equipped Sturmgeschütz IV deployed by Nazi Germany in WWII. ★The powerful, form of the vehicle is captured in style. ★Features optional hull front cement block for armor reinforcement, plus parts recreating Schürzen side armor plates. ★Comes with a commander figure in action pose.   Warning! Not suitable for children under 14 years.

1:35 Ger. SdKfz.222 Arm.Veh. Nor.Afr.(3)

Military model vehicles 1:35

1:35 Ger. SdKfz.222 Arm.Veh. Nor.Afr.(3)

300035286

€44.99

Article number: 300035286 Product: 1:35 Ger. SdKfz.222 Arm.Veh. Nor.Afr.(3) About the Sd.Kfz.222 Among the many armored cars developed by Germany in WWII, the Sd.Kfz.222 is one of the most widely recognized. This light 4x4 vehicle had a distinctive hull shape thanks to its welded construction, and featured an open turret with mesh covers to protect the 3 crew members against grenades and shrapnel. It was armed with a 20mm cannon and 7.92mm machine gun and its exceptional off-road capability made it an excellent reconnaisance vehicle. About the Model •High-quality 1/35 scale assembly kit model of the Sd.Kfz.222 armored car. •Sharp, angular form of hull and turret accurately reproduced. •Open turret enables depiction of interior details such as the 20mm cannon, which features a metal barrel for enhanced realism. •Photo-etched parts for turret mesh covers included for even more detail. •Parts included for a DKW motorcycle and new parts such as hull-mounted tool box and headlight are also planned. •3 new figures are included in this kit: 1 commander and 1 radio operator located in the turret, and 1 motorcycle rider figure that can be modelled with different facial expressions and poses.

1:35 Ger. SdKfz.9 Famo 18to Halftrack(8)

Military model vehicles 1:35

1:35 Ger. SdKfz.9 Famo 18to Halftrack(8)

300035239

€89.99

Article number: 300035239 Product: 1:35 Ger. SdKfz.9 Famo 18to Halftrack(8) Art.Nr.: 300035239 Artikelbezeichnung: 1:35 WWII SdKfz.9 Famo 18to Halbkette(8) About the "Famo" In the wake of Blitzkrieg advances made by the Wehrmacht at the outbreak of WWII, the recovery of damaged or broken tanks from the battlefield proved relatively simple. After securing an area, reinforcing divisions could easily send inoperative vehicles back to the homeland for repair via railway. However, in the seesaw battles with the British Army in North Africa and against the Russian Army on the Russian front, the quick replenishment of tank strength became an indispensable element of Wehrmacht battle strategy. The utilization of the 18 ton Heavy Half-Track "Famo" proved fundamental to this strategy. The proposal for the development of the Wehrmacht half-tracks was first made in 1932. Originally, three half-tracks, designated by their towing capability (5 ton, 8 ton and 12 ton) were designed, until 1936, when a light 3 ton vehicle and a heavy 18 ton vehicle, the largest one in the Wehrmacht, were also added. The 18 ton half track was mainly developed for the towing of 21cm and 24cm artillery howitzer and of course for tank recovery. It could also be used for the transport of over 30 troops. About the Model ★1/35 plastic assembly kit of the largest half-track in the German Army. ★Overall Length: 243mm, Overall Width: 75mm. ★Highly detailed model captures the size and tank-towing power of the FAMO. ★Realistic treads and suspension. ★Synthetic rubber front tires and steerable front wheels for maximum realism. ★Rear gate and storage doors can be assembled in the open or closed position. ★Tank towing drawbar included. ★Can be assembled with or without engine side panels, revealing fully detailed engine. ★Engine can be assembled outside of FAMO. ★Eight figures (four variations) included.   Warning! Not suitable for children under 14 years.

1:35 German Heavy Tank Destroyer Elefant

Military model vehicles 1:35

1:35 German Heavy Tank Destroyer Elefant

300035325

€76.99

Article number: 300035325 Product: 1/35 German Heavy Tank Destroyer Elefant This is a 1/35 scale assembly model of the German Heavy Tank Destroyer Elephant. Extensive research was conducted by Tamiya's designers to bring the modeling world the most accurate rendition to date. Historical background In 1941, Porsche created a prototype tank which incorporated radical features including a gasoline-electric hybrid powertrain. In 1943, the tank was transformed into the Ferdinand tank destroyer armed with an 8.8cm PaK 43 L/71 gun housed in a large box-shaped superstructure and 90 units were produced. During the Battle of Kursk, they demonstrated superior anti-armor capability to knock out T-34 and KV-1 tanks at long range, but their slow speed and unreliability resulted in many being immobilized by mechanical troubles. In 1944, 50 surviving Ferdinands were given modifications, including the addition of a machine gun, a commander's cupola, and were re-designated with the name Elefant. The Elefant saw combat on the Italian and Russian fronts, and some fought until the very end of WWII during the Battle of Berlin.

1:35 JGSDF Panzer Type 61

Military model vehicles 1:35

1:35 JGSDF Panzer Type 61

300035163

€24.99

1:35 U.S. M1A2 SEP Abrams TUSK II

Military model vehicles 1:35

1:35 U.S. M1A2 SEP Abrams TUSK II

300035326

€83.99

Article number: 300035326 Product: 1:35 U.S. M1A2 SEP Abrams TUSK II During the 2003 Invasion of Iraq, the U.S. deployed its latest M1A2 Abrams main battle tanks and these continued to be used in Iraq during the subsequent occupation period. Due to the threats posed by RPGs and improvised explosive devices (IEDs) in the urban environments, the tanks were upgraded with more protection in the form of Tank Urban Survival Kits (TUSK I) in 2004. The upgrade included features such as reactive armor on the hull sides, hull underside armor to protect against land mines, an M2 machine gun mounted above the main gun barrel, infrared cameras for the crew, and an external telephone for communication with accompanying infantry. A further development called TUSK II added features such as tile-shaped reactive armor to the turret and hull sides, armored shield for the commander, and a rear-view camera. These kits could be installed in field depots in about 12 hours and different tanks had different features equipped. About the Model • 1/35 scale plastic assembly model kit of the latest M1A2 SEP Abrams. • Includes parts to depict both TUSK I and TUSK II features. • Detailed parts such as the armored shields for the commander and loader and barrel-mounted M2 machine gun are included. • Intricate curves of the reactive armor tiles are accurately reproduced. • Comes with one commander and one loader figure, both depicted with body armor. • Two marking options for TUSK I and one marking option for TUSK II-equipped tanks included.   Warning! Not suitable for children under 14 years.

1:35 US M113 A.P.C Personal Carrier (5)

Military model vehicles 1:35

1:35 US M113 A.P.C Personal Carrier (5)

300035040

€26.49

Article number: 300035040 Product: 1:35 US M113 A.P.C Personal Carrier (5) The M113 is one of the vehicles most widely used in non-communist countries of the world and is showing activity as transport for infantrymen of free nations. Among the important features of the M113 are smallness, lightness, and therefore easiness to use. It is designed as a light armoured personnel carrier for transporting 13 fully armed riflemen including the driver, but also serves as a cargo boat, ambulance, weapon carrier, command car and reconnaissance car.   Warning! Not suitable for children under 14 years.

1:35 US M113 Arm.Cavalry Assault Veh.(3)

Military model vehicles 1:35

1:35 US M113 Arm.Cavalry Assault Veh.(3)

300035135

€25.99

Article number: 300035135 Product: 1:35 US M113 Arm.Cavalry Assault Veh.(3) With a cupola-cum-gun shield on the M60 machine gun, the M113 ACAV (Armored Cavalry Assault Vehicle) was an improvement on its base, the M113APC (Armored Personnel Carrier). This plastic model assembly kit accurately captures the M113 ACAV, of course including the added cupola/gun shield, and also recreating the crew seats, engine and more in the interior. Three figures in realistic pose are included in the kit.   Warning! Not suitable for children under 14 years.

1:35 US M18 Hellcat Tank Destroyer

Military model vehicles 1:35

1:35 US M18 Hellcat Tank Destroyer

300035376

€48.99

1:35 US M40 155mm Howitzer SPG (8)

Military model vehicles 1:35

1:35 US M40 155mm Howitzer SPG (8)

300035351

€92.99

Article number: 300035351 Product: 1:35 US M40 155mm Howitzer SPG (8) This is an assembly model of the U.S. Self-Propelled 155mm M40. It is a never before seen subject in the Tamiya line-up of 1/35 scale models. The kit uses all new tooling with the exception of the suspension parts as they are from the M4A3E8 Sherman "Easy Eight" model kit. The M40 was a significant step in U.S. Army artillery mechanization, pairing the M1 155mm gun with the proven M4 Sherman chassis. Armor was light given its intended use as a long range weapon (they were effective up to 23.5km) away from the front line, while the layout was changed from the M4 to allow a big fighting compartment at the rear to accommodate the big gun. It was fitted with smooth horizontal volute spring suspension (HVSS). Over 400 were produced before the end of WWII; although they never fought in the conflict, one example of their T83 prototype did. The M40 served in the Korean War, and was eventually replaced by the M53.   Warning! Not suitable for children under 14 years.

60 of 173 Items