Off-road rc cars

Off-road RC cars

1:12 Midnight Pumpkin Metallic/Chrome, RC kit

Midnight Pumpkin Metallic/Chrome brings classic 1950's pick-up truck styling into a 1:12 RC assembly kit with a bold black metallic body and silver-plated wheels. The oversized tyre setup gives the model its unmistakable stance on the track, while the plated body sections create a bright contrast against the darker finish. The chassis uses an ABS box-type frame and a 14.7:1 gear ratio, combining a compact layout with gearing tuned for lively running. Front independent swing axle suspension and a rear rolling rigid setup shape how the model handles direction changes and uneven surfaces. A 540 Type motor is included, and an electronic speed controller is supplied to manage acceleration input during driving. Parts H and J, together with the body, are finished using a vacuum plating technique that sets this version apart visually from the original release. A wheelie bar is included for upright stunt runs, adding another driving mode beyond regular laps and straight-line passes. Radio gear, a battery pack, a charger and paints are required separately. On a home track, in a hobby room, or during club running sessions, the combination of retro truck proportions, plated details and wheelie-ready setup gives this model a strong visual presence in motion.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 MB G-Class G500, RC assembly kit, CC-02

€294.99

The 1:10 MB G-Class G500 RC assembly kit pairs the upright presence of the 2018 G-Class with the trail-focused CC-02 platform. Its polycarbonate body captures the square proportions of the full-size vehicle, and the separate front grille, side mirrors and spare wheel cover give the shell more defined exterior detail when the model is finished. At 455 mm long, 196 mm wide and 207 mm high, the model has a substantial stance, while the 267 mm wheelbase supports balanced proportions on the chassis. The 4WD drivetrain places the motor longitudinally behind the front axle and uses a separated gearbox and transfer case with propeller shafts to drive the front and rear differential gears. Tuning options go further with 20 possible gear ratios from 11.09:1 to 29.28:1 when separately sold pinion gears are used. LED attachment parts are included, and the TLU-01 LED Light Unit with LEDs is included for export only. On rocks, dirt tracks and uneven trail sections, the front and rear rigid suspension layout gives the model the kind of axle movement that suits technical off-road driving. The finished G-Class body also brings strong display presence between runs, with its upright roofline, wide arches and rear spare wheel cover standing out clearly on a shelf or workbench. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:12 Lunch Box Re-Release, RC assembly kit

€164.99

The Lunch Box Re-Release brings back a classic Tamiya van with a 1:12 scale body, oversized 115 mm tyres and a lifted monster truck stance that turns every run into a rolling centrepiece. First released in 1987, this RC assembly kit combines the boxy shape of a custom panel van with the tall proportions and visual punch of big-wheel off-road styling. The white ABS body and yellow ABS wheels give the model a strong period look straight from the workbench, while the side panels offer broad surfaces for custom paint and graphics. Drive comes from an included 540 brushed motor, and reverse speed control with low voltage protection is equipped for brushed running. The chassis layout stays true to the original concept with a box type frame, 2WD drive, front swing axle and rear rolling rigid suspension. That combination creates the tall ride height and lively character that made the Lunch Box such a memorable name in RC history. On tarmac, packed dirt or open paved space, the van's high stance and large tyres create an unmistakable presence as it bounces, turns and charges ahead. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Comical Hotshot, RC assembly kit, GF-01CB

€209.99

The 1:10 RC Comical Hotshot (GF-01CB) is an RC model assembly kit built around a compact off-road layout with a stylized Hotshot body, wing and a stance that turns every run into a lively visual scene. The lightweight polycarbonate shell is pre-painted in PS-2 Red, and the included sticker set based on the 2007 re-issue Hotshot adds the finishing graphics without requiring a separate body paint stage. Power runs through the GF-01CB chassis via a gear-driven 4-wheel drive system, while ABS two-part wheels use red and white spoke sections to match the body styling. ST block bubble tires pair a stepped tread with 45/99 mm front and 55/99 mm rear sizing, giving the chassis its distinctive proportions and helping it track across uneven ground. Red-molded CVA Super Mini oil dampers manage suspension movement during bumpy driving, and the rear wheelie bar supports dramatic nose-up acceleration when throttle is applied hard. Dedicated side guards, bumper and muffler parts complete the custom look, and included light pods allow installation of separately sold 5 mm LEDs. This model suits bench building sessions as well as short outdoor RC runs on loose, uneven surfaces where the tall tires and 4WD layout can be appreciated. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:10 Ford Escort MkII Rally, RC model kit

€199.99

The 1:10 Ford Escort MkII Rally RC model kit pairs a classic rally shape with the MF-01X chassis, creating a machine that looks at home kicking up dust on flat dirt or tracking cleanly across asphalt. Its clear polycarbonate body recreates the Escort MkII form with a lightweight shell, while molded ABS parts for the bumpers, side mirrors and fog lights bring extra definition to the exterior. Under the shell, the MF-01X layout uses a rear-mounted 540 Torque Tuned motor, a propeller shaft and gear differentials to drive all 4 wheels. The chassis frame combines a 3-segment structure with a 2-piece frame and gearbox housing, giving the running gear a compact, purpose-built layout. At 414 mm in length with a 239 mm L wheelbase, the model carries the long-wheelbase rally setup specified for this body. The chassis can also be converted to other wheelbase formats with separately sold parts, and it remains compatible with previous M-chassis bodies. An electronic speed controller is included. The decal sheet finishes the shell with sponsor logos and period rally graphics, while the front and rear light cases are compatible with separately sold 5 mm LEDs for an illuminated display or night-stage look. Radio gear, a battery pack, a charger and paints are required separately. On a shelf, the Escort body and rally markings deliver strong historic motorsport character; on the ground, the 4WD layout and suspension setup support running across mixed surfaces.

Off-road RC cars

1:10 Ford F-150 Ranger XLT, RC model kit

€374.99

This 1:10 RC model kit brings back the Ford F-150 Ranger XLT as a reissue of the 1981 release, capturing the angular lines and pickup stance of the seventh-generation F-series in a 430 x 215 x 185 mm format. The ABS body is shaped with triangular side windows on the cab, and the stealth front body mount removes visible mounting holes at the nose for a cleaner scale appearance. Freshly moulded exterior parts add detail across the shell, including side mirrors, windscreen wipers, headlights, a front grille section and bumper protection. An updated decal sheet supports the period finish, and the body also carries a driver figure for a fuller cockpit presentation. Ford emblems are reproduced at the front and rear, reinforcing the character of the full-size truck. The complete model weighs 1880 g, giving the chassis and body combination a planted feel in motion. Under the shell, a 540 electric motor and electronic speed controller form the drive package, with electronics and the 7.2 V battery area covered by a transparent housing. Radio gear, a battery pack, a charger and paints are required separately. On a shelf, the pickup reads as a detailed vintage reissue; on the ground, the long body, rear sand tyres and 2WD layout suit loose-surface running with a classic off-road stance.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 XV-02 PRO, RC chassis kit, shaft-driven 4WD

€374.99

The 1:10 XV-02 PRO RC chassis kit brings shaft-driven 4WD and a front mid-ship motor into a layout built for rally running and detailed setup work. Equal-length front and rear long propeller shafts support a balanced drivetrain arrangement, while the center-left longitudinal battery pack position helps distribute weight for controlled handling on mixed surfaces. Tuning depth sits at the core of this chassis. The kit comes with 2 39T differential gears and 1 40T differential gear, allowing front and rear drive balance to be altered by changing the gear combination at each end. Newly designed gears, a bathtub frame chassis, a chassis cover and 6-degree caster blocks define the updated structure, while suspension arms and front uprights are based on the XV-01 chassis kit. An aluminum servo mount is included, and new metal parts are used for the motor mount, propeller shafts, input and center shafts, plus the urethane bumpers. Long aluminum dampers work at both front and rear, and rally dish white wheels are matched with rally block tires for the intended running style. The polycarbonate chassis cover with wheel well liners helps limit dirt and dust entering the chassis during use on gravel and similar terrain. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:12 Lunch Box Black Edition, RC kit, 2WD

€164.99

The 1:12 Lunch Box Black Edition brings custom van styling and RC wheelie action together in a compact kit with a 385 mm length, 290 mm width and 207 mm wheelbase. Its raised stance, oversized proportions and black-finished body create a bold silhouette that stands out on tarmac, packed dirt and short grass. This reissue traces back to the original 1987 Lunch Box and keeps the playful monster-van character that made the design memorable. The Black Edition uses a black-coloured ABS body with matching black rims, while chrome-plated parts on the radiator grille and bumper sharpen the contrast at the front end. A wheelie bar sits at the rear to support repeated lift under acceleration, and the lighting preparation leaves room for a more detailed build. The kit format also suits builders who enjoy fitting and finishing the shell before the first run. On open ground, the short wheelbase and tall tyre format give the model a lively attitude in tight turns and quick throttle inputs. Car park sessions, club meetups and casual weekend running all suit the Lunch Box Black Edition well. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:12 Lunch Box EVO, RC model kit, CW-01E

€214.99

The 1:12 Lunch Box EVO brings the tall van shape and wheelie-ready character of a Tamiya classic to the updated CW-01E chassis. With a length of 390 mm, width of 295 mm and height of 220 mm, the model keeps its unmistakable proportions while the revised layout gives it a more settled feel on the move. A tub frame chassis forms the base of the kit, and the EVO revision adds detail that changes how the model behaves on the ground. The front strut brace increases chassis rigidity and also serves as a transponder mount. The body used here matches the version from item 58347, while the longer wheelbase and wider track compared with that earlier release sharpen traction and drivability. A new decal sheet supports the finishing stage with fresh markings for the ABS shell. Running sessions on tarmac, packed dirt or open paved areas make the most of the 2WD layout and the model's lively stance. Radio gear, a battery pack and a charger are required separately. The combination of classic Lunch Box styling, updated geometry and detailed kit construction gives the EVO version a strong presence both on the bench and in motion.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Blitzer Beetle, RC buggy, 2WD assembly kit

€209.99

The 1:10 Blitzer Beetle brings classic Beetle styling into an RC buggy format with a 2WD layout and a body shell shaped around the familiar rounded roofline, front fenders and compact rear. Bright orange body sections, a black rear and roof area, and large flame graphics give the model a bold custom-race look that stands out clearly once the buggy is on the move over dirt or gravel. Visible front suspension springs, a front bumper, side mirrors and window detailing add extra scale character beyond the main shell shape. The oversized knobby tyres suit the off-road buggy format, giving the model the visual stance associated with rough-surface running and vintage sand-race inspired machines. As an assembly kit, this version leaves the build as part of the hobby, with the chassis and body coming together before the first outing. Batteries are not included. The finished buggy suits track sessions, packed-dirt running areas and display between drives, where the Beetle silhouette and vivid livery remain a strong part of its appeal. It also fits hobby collections that focus on classic body styles, 1:10 RC machines or Tamiya buggy designs with a distinct retro character.

Off-road RC cars

1:10 Land Rover Defender 90, RC assembly kit, CC-02

€294.99

The 1:10 Land Rover Defender 90 on the CC-02 chassis brings classic 1990 off-road styling into an RC assembly kit with clear scale character and cross-country hardware. At 429 mm long, 200 mm wide and 215 mm high, the 3-door body sits with the upright stance and short-wheelbase proportions that define this vehicle. Its 242 mm wheelbase matches the short CC-01S size, giving this version the compact layout associated with the Defender 90. Separately molded parts for the grille, side mirrors, light cases and outer roll gages add sharper definition to the exterior, while the polycarbonate body keeps weight down. The drivetrain sends power through short propeller shafts to front and rear differential gears, a layout that suits loose ground and uneven terrain. LED compatibility is built in as well, with space for 2 x 5 mm headlights and 6 x 5 mm rear LEDs. A wide range of Hop-Up Option Parts is available for the CC-02 chassis. This assembly kit suits bench building, body finishing and outdoor RC running as separate parts of the hobby. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:10 Porsche 911 GT3 992, RC assembly kit, TT-02

€184.99

This 1:10 R/C model assembly kit brings the Porsche 911 GT3 992 into a hobby format with a sharply formed polycarbonate body, separate rear wing and separate light cases. At 467 mm long, 188 mm wide and 131 mm high, the finished car has the low, stretched proportions that make the full-size GT3 instantly recognizable on the bench and in motion. The TT-02 chassis gives the model a 251 mm S-size wheelbase and a shaft-driven 4WD layout, pairing straightforward construction with a platform known for adaptable setup options. Separate black molded parts depict the side mirrors and wing stays, adding extra definition where painted body shells often flatten smaller details. Dark gun metal dish wheels sit under the body with a purposeful fit, and the included Urethane Bumper L supports the front end during running. The kit also comes with stickers and masking stickers, helping the paint scheme and exterior markings land with cleaner edges. During assembly, the separate wing, light cases and mirror parts create a more layered finish than a one-piece shell alone. Once built, the 4WD layout, radial tire setup and 251 mm wheelbase suit repeated laps on paved sections, car park courses and mixed club surfaces. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:10 Toyota 4x4 Pick Up Bruiser 2012 RC kit

€819.99

This 1:10 RC assembly kit recreates the Toyota Hilux Pick-Up RN36 with the tall, high-lift stance that made the 1980s truck so distinctive. At 525 mm long, 278 mm wide and 275 mm high, the model carries real visual presence, while the ladder frame layout brings the structure of the full-size vehicle into the build itself. The chassis uses a longitudinally mounted Type 540 motor, a shaft-driven 4WD system and front and rear 6-pinion differential gears. Gear ratios of 54.63:1 in 1st, 40.49:1 in 2nd and 27.92:1 in 3rd define how the 3-speed transmission changes the driving feel across terrain. Front tread measures 200 mm, rear tread 218 mm, and the complete model weighs 3.2 kg. Metal parts are used throughout for a strong mechanical look, and the live axle setup reflects the full-size truck with metal axle housings, leaf springs and oil dampers. The detailed body, flared fenders and large tyres suit shelf display just as naturally as outdoor running on loose ground. Radio gear, a battery pack, a charger, transmitter batteries and an electronic speed controller are required separately.

Off-road RC cars

1:10 Toyota Land Cruiser 40, RC assembly kit, CC-02

€264.99

This 1:10 RC assembly kit recreates the Toyota Land Cruiser 40 with the upright proportions and expedition character that made the original 4WD so distinctive. At 390 mm long, 198 mm wide and 237 mm high, the model has a substantial trail-ready presence, and the polycarbonate body keeps the shell light while preserving the crisp, boxy silhouette of the 1972 FJ40V. Under the body sits the CC-02 cross country chassis, developed for off-road driving and built around a ladder frame layout inspired by full-size vehicles. The 252 mm M-size wheelbase sets the proportions, and short 76 mm propeller shafts are included as part of the drivetrain package. Separately molded roof rack and light pod parts extend the scale look above the body line, while the detailed shell is joined by grille, mirror and indicator components that sharpen the finished appearance. A Type 540 motor and included ESC complete the core running hardware. The clear body is supplied unpainted, leaving room for a custom finish on domestic or export style builds. Radio gear, a battery pack, a charger and paints are required separately. Once assembled, the combination of block tread tires, scale bodywork and cross-country chassis layout suits rocky paths, compacted dirt and shelf display between running sessions.

Off-road RC cars

1:10 Toyota Land Cruiser 40, RC assembly kit, CC-02

€274.99

The 1:10 Toyota Land Cruiser 40 assembly kit brings classic 4WD character to the CC-02 platform with a yellow pre-painted body and the upright proportions of the 1972 FJ40V. At 390 mm long, 198 mm wide and 237 mm high, the model has the tall, square stance that makes the Land Cruiser 40 instantly recognizable on a trail course or shelf. The polycarbonate bodyshell keeps weight down, while separate molded parts add definition to the grille, mirrors, turn signals and roof rack with light pods. A 252 mm M-size wheelbase sets the proportions on the chassis, and the included 76 mm short propeller shafts match the layout. Oil-filled dampers support the chassis over uneven ground, and the ladder frame construction follows the full-size vehicle theme with a structure suited to cross-country driving. Silver 12-spoke wheels and block pattern tires complete the period look, and the sticker set combines window and window frame sections to reduce extra paint work during finishing. Cockpit parts and a driver figure add another layer of scale detail once the body is completed. The finished model suits slow trail sessions, obstacle lines and display between runs, with the roof rack, raised ride height and classic Land Cruiser shape giving it a strong presence in each setting. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Toyota Tundra HighLift, RC assembly kit

€559.99

The 1:10 Toyota Tundra HighLift brings the shape of the second-generation double cab pickup into an RC assembly kit with a tall stance, large-diameter tyres and a chassis layout that follows the full-size truck closely. At 500 mm long, 216 mm wide and 238 mm high, the model has a broad road presence, and the combination of an injection-moulded bodyshell and exposed underframe gives it a convincing scale look whether it is parked on a shelf or moving over rough ground. Much of the character comes from the construction itself. Metal parts are used for the ladder frame, leaf springs and friction dampers, so the running gear has the same visual weight as the body above it. An RS540 motor and ESC handle the drive, while the 3.1 kg chassis gives the truck a planted feel. The set also contains custom parts including a roll bar, grille guard and roof carrier with 2 snowboards, allowing different finished looks without changing the core truck design. The 3-speed gearbox and shaft-driven 4WD suit slow trail sections, uneven surfaces and more open stretches where the taller ratio can be used. On a workbench, the detailed mechanical layout keeps the build engaging; on the ground, the long frame, rigid axles and pickup proportions create the unmistakable presence of a lifted truck. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Wild Willy 2000, RC assembly kit, WR-02

€199.99

The 1:10 Wild Willy 2000 RC assembly kit brings the animated stance of the mid-1980s original into a WR-02 chassis layout built for rough-terrain driving. Its larger tires, rear-wheel-drive setup and fitted wheelie bar create the signature wheels-up action, while the olive-drab body, roll cage, roof lights and seated driver figure give the model a strong off-road character on the bench and in motion. At 345 mm long, 270 mm wide and 270 mm high, the chassis carries a 170 mm wheelbase and a weight of 1,360 g without R/C units or battery pack. A Type 540 motor sits on the centerline with the battery position aligned through the middle of the monocoque frame, and power travels to the rear wheels through a fully enclosed gearbox. The drivetrain uses 3-bevel differentials and a 1:18.3 gear ratio. Front and rear tire width and diameter measure 113/70 mm, with tread figures of 265 mm at the front and 270 mm at the rear. Tires and wheels plus the gearbox and motor come pre-assembled. An electronic speed controller is included. Radio gear, a battery pack, a charger and paints are required separately. The WR-02 layout suits loose ground, packed dirt and uneven garden paths where the larger tire footprint and 4-wheel double wishbone suspension can work through bumps and ruts. On a smooth stretch, the wheelie bar lets acceleration turn into the upright Wild Willy pose that made the original such a standout.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Sand Scorcher 2010, RC buggy, 2WD kit

soon available again

The 1:10 Sand Scorcher 2010 brings the rounded Baja buggy silhouette from the original 1979 release into an R/C assembly kit with rear-wheel drive 2WD mechanics and a detailed body shell. On sand and loose dirt, the layout combines the long-travel off-road stance with the direct feel of a classic buggy chassis, creating a model that looks distinctive even before the first run. The body is molded in white polystyrene and reproduces the one-make race buggy style seen at the Baja 1000 in California, while the kit also includes a polycarbonate body in the listed scope of delivery. A transparent mechanism case covers the R/C components and battery area, keeping the internal layout visible while shielding the running gear from dirt thrown up by the tyres. The chassis uses 4-wheel independent suspension with a front double trailing arm setup and rear swing axle arrangement, giving each corner room to work over broken ground. Reinforced front uprights add support at the steering end, and the 3-piece center-lock wheels carry grooved front tyres with ribbed rear tyres for terrain-specific grip. During outdoor running, the Sand Scorcher shows its character in broad slides, quick direction changes and the lifted stance of a desert racer. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Squash Van, RC assembly kit, 4WD GF-02

soon available again

The Squash Van pairs a 1:10 scale off-road van body with the GF-02 chassis for a build that combines retro panel van character and full 4WD running. At 454 mm long, 280 mm wide and 238 mm high, with a 267 mm wheelbase, the finished model has a broad, purposeful stance that looks at home kicking across grass, dirt and uneven ground. Its gear-driven layout places the motor low in the center of the monocoque frame, a configuration that helps keep weight balanced as power moves to both axles. The slim frame uses ladder and pipe motifs, giving the chassis a distinct mechanical look beneath the body. Integrated sealed gearboxes help keep stones out during off-road driving, and a motor guard adds extra protection in rough conditions. The steering servo sits on the left with identical-length tie-rods, a layout chosen for direct steering action. A Type 540 motor and ESC are included in the kit. The clear polycarbonate shell leaves room for a custom finish, while the supplied graphics bring in squash illustrations, the model logo and triple stripes for a bold vintage-inspired theme. This is an assembly kit, so radio gear, a battery pack, a charger and paints are required separately. Once built, the long wheelbase setup and oversized tires give the van a distinctive mix of scale presence and loose-surface driving fun.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Toyota Land Cruiser LC300, RC assembly kit

soon available again

This 1:10 RC assembly kit recreates the Toyota Land Cruiser LC300 with the upright proportions and strong road presence of the full-size SUV. At 472 mm long, 200 mm wide and 192 mm high, the model has a substantial footprint, and the 267 mm wheelbase gives the body and chassis the stretched, planted look associated with the Land Cruiser name. The bodyshell uses 1.2 mm polycarbonate to keep weight down while preserving the shape of the LC300, and the finish is supported by separate detail parts that define key exterior areas. Metal-plated H parts depict the door mirrors, light cases and front grille sections, while pearl white molded K parts render the door handles and the shark fin antenna on the roof. A Type 540 motor and included ESC complete the drive package. The kit also includes the CC-02 chassis, whose ladder frame construction echoes full-size off-road engineering and suits cross-country running with 4WD control. On the trail, the combination of block pattern tires, oil-filled dampers and the CC-02 layout suits dirt paths, rocky sections and uneven ground where suspension movement and traction matter. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:10 Ford Bronco 2021, RC assembly kit, CC-02

available in stores

This 1:10 RC assembly kit recreates the Ford Bronco 2021 with a 447 mm long body, a 204 mm width and a 233 mm height, giving the 2-door First Edition shape a strong cross-country presence on the CC-02 platform. The 1.2 mm polycarbonate bodyshell carries key Bronco cues such as round front lights, raised front fender lines and oblong taillights, so the finished vehicle reads clearly from front, side and rear angles. The CC-02 chassis uses a ladder frame inspired by full-size vehicles, combining the visual character of an off-road understructure with the rigidity needed for uneven terrain. A 252 mm wheelbase marks the first use of the M-size wheelbase with this chassis, matching the proportions of the Bronco body. PC-ABS H parts form the grille, mirrors, spare tire cover and door handles, while metal-plated K parts shape the light cases for added contrast in the exterior detailing. The standard PC-ABS roof rack extends the scale look and gives the upper bodyline extra depth. On rocky tracks, dirt paths or indoor test runs over improvised obstacles, the 12-spoke wheels and semi-pneumatic rubber tires help the model settle into rougher surfaces with a purposeful off-road stance. Parts for installation of headlight and taillight LEDs are included, adding another layer of finishing detail during the build. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:10 Ford F-350 HighLift 4x4, RC assembly kit

available in stores

The 1:10 Ford F-350 HighLift 4x4 brings classic American pickup presence into an RC assembly kit with a tall stance, large-diameter wheels and a highly detailed injection-molded body. Its ladder frame layout, shaft drive 4WD system and 3-speed transmission give the model the kind of mechanical depth that suits both careful building sessions and slow, controlled driving over rough ground. Steel channel rails and resin crossmembers form the chassis, creating a strong structure around the running gear. Adjustable front and rear leaf spring suspension works with friction dampers, and the differential can be locked in place when extra off-road drive is needed. A slipper clutch helps manage power transfer through the propeller shafts, while the quick-access battery compartment allows battery changes without removing the body shell. The kit model comes with detailed illustrated assembly instructions. Radio gear, a battery pack and a charger are required separately. On dirt tracks, gravel paths or indoor workshop shelves, the Ford F-350 HighLift 4x4 stands out through its raised pickup proportions and realistic underbody layout. The combination of scale body detail, mechanical transmission action and off-road-focused chassis design gives each run a deliberate, full-size truck character.  Warning! Not suitable for children under 14 years.