Novelties
Bundle - 22 %
On-road RC cars (2WD/4WD)
Tamiya Nissan Skyline Bundle
BDL-300058651€293.97
Product bundle consisting of: 1:10 RC Skyline GT-R (R32) (TT-02D) / 1:10 Wheel Set Drift (4) black/red / Corner marker 10x red 10x white / LED Light Set Drift Article number: 300058651 Product: 1:10 RC Skyline GT-R (R32) (TT-02D) Tamiya’s line of drift spec TT-02D chassis cars welcomes this model of the iconic GT-R (R32), the thirdgeneration Skyline which went on sale in 1989 in Japan and came loaded with technological advances like HICAS 4-wheel steering and ATTESA E-TS all-wheel drive. Its RB26DETT 280 PS engine was designed for the race scene. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 452mm. • LEDs are included in export versions of the kit only. • The Skyline GT-R (R32) form is recreated by a durable and lightweight polycarbonate body (originally used in Item 58428). • Separately molded parts are included in the kit to recreate side mirrors and rear wing. • Features marking stickers to decorate the car. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. As such, it is compatible with TT-02 option parts. • Comes with 24mm width drift-spec tires on mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. Article number: 500900157 Product: 1:10 Wheel Set Drift (4) black/red The drift wheels are suitable for on-road vehicles in a scale of 1:10 with 12 mm standard hex wheel hub. The tyres are made of hard plastic. The pre-glued & ready to run wheels are designed for long drifts on smooth tracks. The black rims in Y-design as well as the attractive red rubber strip set an optical accent. Article number: 500906153 Product: LED Light Set Drift Features: • flash light front l./r. 3 mm • flash light rear l./r. 3 mm • head light l./r. 5 mm (4x) • rear light/break light l./r. 5 mm • ground light blue l./r. and front/rear (4x) • demo mode Scope of delivery: LED-controller, 10x LED and 4x LED-tubes Warning! Not suitable for children under 14 years.
Bundle - 26 %
Off-road RC cars
Tamiya RC MB Unimog Bundle
BDL-300058692€322.99
Product bundle consisting of: 1:10 RC MB Unimog 406 U900 (CC-02) / CC-02 Chassis Ball bearing Set (22) Article number: 300058692 Product: 1:10 RC MB Unimog 406 U900 (CC-02) • This is a 1/10 R/C model assembly kit. Length: 384mm, width: 196mm, height: 224mm. Wheelbase: 242mm. • The distinctive form of the Unimog is accurately depicted in durable polycarbonate, with separate parts included for side mirrors and fuel tank, plus a metal-plated front grille and emblem. • Includes block pattern tires, and red ABS wheels with a depiction of bead lock designs. • Propeller shafts (short: 76mm) are also included. • The CC-02 chassis is designed for a wide range of off-road scenes including rocky terrain, and its ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Warning! Not suitable for children under 14 years.
Bundle - 27 %
RC buggys (2WD/4WD)
Tamiya The Frog Bundle
BDL-300058354€217.97
Product bundle consisting of: 1:10 RC The Frog 2005 2WD Buggy Re.Re / PS-1 White Polycarbonate 100ml / PS-11 Pink Polycarbonate 100ml / PS-5 Black Polycarbonate 100ml Warning! Not suitable for children under 14 years.
Merchandise & catalogues
TAMYIA RC Catalogue 2024/25 Ger/EN
500992024€6.99
Article number: 500992024 Product: TAMIYA RC Catalogue 2024 GER/EN On 204 pages, the beginner, the collector from classic models to racers will find everything that makes the RC modeling heart beat faster. High-quality RC models from TAMIYA, the Japanese market leader for remote-controlled electric vehicles, have built up a good reputation over the years and are rightly advertised with the slogan "First in Quality Around the World". TAMIYA has been producing plastic models since the late 50s and celebrated 45 years of production of RC vehicles in 2021. 204 pages including 4 cover pages, color print Spare/tuning parts, paints, tools languages: German / English
On-road RC cars (2WD/4WD)
1:10 RC Opel Kadett GT/E Rally MB-01
300058729€155.00
Article number: 300058729 Product: 1:10 RC Opel Kadett GT/E Rally MB-01 Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and midship rear motor / rear wheel drive (MR). The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, Manual, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC Volvo FH16 XL 750 4x2
300056375€485.00
Article number: 300056375 Product: 1:14 RC Volvo FH16 XL 750 4x2 Tamiya welcomes the Volvo FH16 Globetrotter XL 750 4x2 Tractor in our popular 1/14 Tractor Truck series! The FH16 series is the flagship of Swedish manufacturer Volvo Trucks and it was the result of a model change in 2012. The top-class Globetrotter XL offers comfortable interior space and superior aerodynamics, and allows long-distance travel coupled with a high-output 750hp engine. Volvo FH16 XL 750 4x2 Model kit ABS Injection body with aero-pack Aluminum Ladderframe, 1 drive axle, 3-Speed shifting gearbox, metal-plated wheels, Manual, Electricmotr Type 540. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC TRF421 Chassis Kit
300042384€755.00
Article number: 300042384 Product: 1:10 RC TRF421 Chassis Kit The TRF series welcomes the brand new TRF421 chassis kit. This R/C model assembly kit creates a 2 beltdriven 4WD, carbon fiber double-deck chassis. New features - such as updated drivetrain, lower deck featuring new shape, updated (one-piece or two-piece) upper deck, front and rear A-shaped upper suspension arms, adjustable front and rear caster angles, and shorter dampers - will surely provide superior performance. TRF421 Racing Chassis kit, 4WD, Carbon and Aluminium parts, A-Shape Arms, 2 Upper decks,incl. Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Fiat 131 Abarth OF paint. MF-01X
300047494€205.00
Article number: 300047494 Product: 1:10 RC Fiat 131 Abarth OF paint. MF-01X Tamiya welcomes the Fiat 131 Abarth Rally Olio Fiat as another 1/10 R/C rally car based on the MF-01X chassis. The Fiat 131 Abarth Rally developed from the Fiat 131 Mirafiori made its debut in 1976, and became champion in global rally races in 1977 and 1978. The kit depicts the Olio Fiat’s livery. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Motul Autech Z 2023 TT-02
300058735€160.00
Article number: 300058735 Product: 1:10 RC Motul Autech Z 2023 TT-02 Tamiya welcomes another release on our popular TT-02 chassis; this time, the Motul Autech Z! The Motul Autech Z is raced by the NISMO team in the 2023 Super GT series. Although it inherits elements of the NISSAN Z road car design, it is very different, with a carbon fiber body and a front 550hp-plus 2-liter 4-cylinder single turbo engine. It got off to a great start, winning the opening race of 2023 in Okayama. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC buggys (2WD/4WD)
1:10 RC Hotshot II (2024) 4WD
300058737€230.00
Article number: 300058737 Product: 1:10 RC Hotshot II (2024) 4WD Tamiya welcomes a re-released and updated version of the 4WD buggy Hotshot II, the original of which was first released in 1987, following Tamiya’s first 4WD buggy Item 58047 Hotshot released in 1985 and Item 58054 Supershot released in 1986. The Hotshot II was a lightweight design thanks to its use of plastic parts. Why not get this nostalgic buggy kit in addition to Item 58695 1/10 R/C Wild One Off-Roader Blockhead Motors? Including ESC. 4WD assembly kit, Vintage Model, ESC included, Type 540 Motor, pre-painted Polycarbonat-body, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Toyo. Celica GT-Four TT-02 ST185
300058730€150.00
Article number: 300058730 Product: 1:10 RC Toyo. Celica GT-Four TT-02 ST185 Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Toyota Celica GT-Four RC (ST185). The Toyota Celica GT-Four RC was developed as a homologation car to take part in global rally races, and in 1992, 5,000 units were sold around the world. With its curved, powerful body, this car employed a 2-liter turbo engine with metal turbines and water-based intercooler system, which was capable of 235ps. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior controllability and traction. In 1993 global rally races, the Celica GT-Four (ST185) brought both Manufacturer’s and Driver’s Championships to Toyota for the first time. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Toyota Supra (JZA80) BT-01 2WD
300058733€155.00
Article number: 300058733 Product: 1:10 RC Toyota Supra (JZA80) BT-01 2WD The Supra was the fourth generation of Toyota (JZA80) which was announced as a Toyota’s flagship sportscar in 1993. Its top grade RZ model employed a 3-liter inline-6 twin turbo engine capable of 280hp, 6-speed transmission, 4-wheel double wishbone suspension and ventilated disc brakes for front and rear. The muscular form and high-spec performance mesmerized fans all over the world and achieved success in motorsports races. The 2WD BT-01 chassis gives a choice of two types of wheelbase (257mm or 251mm), and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. (Six setups are available in total.) 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Ford Focus RS Custom TT-02 paint
300047495€155.00
Article number: 300047495 Product: 1:10 RC Ford Focus RS Custom TT-02 Lack. Tamiya welcomes this 1/10 R/C model assembly kit – which depicts the high-performance rally-oriented RS version of the 1998 debut Ford Focus compact car with various customizations – based upon our popular TT_02 chassis. In 2003, the Ford Motor Co. Team chief engineer Christian Loriaux made various changes such as seat position, roll cage and suspension to the Ford Focus, and improved aerodynamics with the updated bumper shape, hood intake position and large rear wing and more. The 2-liter inline-4 turbo engine was capable of 300PS and 550Nm. This rally car secured the second place of the Manufacturer ranking four times during 7-year races, and showed off its strength. This time, the kit recreates a custom street version without sponsor logos. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 US Grum. FM-1 Wildcat/Martlet Mk.V
300061126€37.99
Article number: 300061126 Product: 1:48 US Grum. FM-1 Wildcat/Martlet Mk.V Here comes more aircraft news! Tamiya welcomes the 1/48 Grumman FM-1 Wildcat/Martlet Mk.V™ in our legendary 1/48 Aircraft Series. Based upon our popular Item 61034 1/48 Grumman F4F-4 Wildcat, this kit authentically recreates the FM-1 featuring four machine guns with both the U.S. Navy and Royal Navy markings and one sitting pilot figure. The deployment of the Grumman F4F-3 Wildcat – one of the main U.S. Navy carrier-based fighter – started from 1940, and in 1942, the F4F-4 was introduced and this aircraft employed a foldable wing for efficient use on deck while 12.7mm machine guns were increased from four to six. With its bulletproofing, rigid fuselage and its pilots' tactics, the F4F-F was more than equal to the Zero fighter. Although the F4F-F gave its position to aircraft equipped with 2,000hp-class engine such as the F6F Hellcat and F4U Corsair after WWII onward, , this aircraft - which was suitable for use on small flight decks – constructed its presence as the aircraft to be deployed on escort carrier and to enhance air force. While the Grumman focused on the F6F production, Eastern Air Lines took over the production of the F4F-4 variant which was called as the FM and its first production variant FM-1 was mostly the same as the F4F-4 except for decreased (from six to four) machine guns. The Wildcat was introduced to the Royal Navy and was known as the Martlet (fictitious bird often seen in the English coats of arms). This aircraft continued to see action as anti-submarine patrol and convoy escort until the end of war. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 US F-35B Lightning II
300061125€110.00
Article number: 300061125 Product: 1:48 US F-35B Lightning II Here comes another F-35 Lightning II variant, F-35B in our legendary 1/48 Aircraft Series. Developed under the Joint Strike Fighter (JSF) program, the F-35 integrates multiple functions into its design and there are three types: the F-35A conventional takeoff and landing (CTOL) aircraft, the F-35B short takeoff, vertical landing (STOVL), and the F-35C carrier takeoff and landing (CV). The F-35B was developed as a successor of the AV-8B Harrier II, and the U.K. - which along with the United States Marine Corps. employed many Harrier II -joined this program at early stage. The F-35B is recognized as the aircraft which accomplished both supersonic flight and STOVL by the 3-bearing engine duct nozzle and lift fan, and following the F-35A, the F-35B deployment started in 2015. The first F-35B to see action was an aircraft belonging to the U.S. Marine Corps VMFA-211 "Wake Island Avengers" in Afghanistan, in September 2018. Not only the U.S. and the U.K. but also Italy employs the F-35B, and the Japan Air Self-Defense Force also plans to launch a new fighter squadron with F-35B from 2024 onward. As the F-35B can be operated from both aircraft carriers and airfields featuring short runway, many countries are considering its deployment, and the F-35B looks set to become a significant presence in the skies across the world. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Alfa Rom. Giulia Spr. Club MB-01
300058732€165.00
Article number: 300058732 Product: 1:10 RC Alfa Rom. Giulia Spr. Club MB-01 Here is another R/C kit with the MB-01 chassis – this time, middle wheelbase and midship rear motor / rear wheel drive (MR). This R/C kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught many an eye at the racetrack.
On-road RC cars (2WD/4WD)
1:10 RC Porsche 911 GT3 (992) Blue TT-02
300047496€170.00
Article number: 300047496 Product: 1:10 RC Porsche 911 GT3 (992) Blue TT-02 Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
Off-road RC cars
1:10 RC Squash Van 4WD GF-02
300058725€200.00
Article number: 300058725 Product: 1:10 RC Squash Van 4WD GF-02 Tamiya is delighted to announce a new off-road car featuring big tires; the name is the Squash Van, and it is paired with a new gear-driven 4WD GF-02 chassis. While the GF-01 chassis features a comical design, the GF-02 chassis employs a more realistic wheelbase and a frame with ladder / pipe motifs. This R/C assembly kit is inspired by 1950s American panel vans, and offers an excellent drive even on grass or uneven surfaces. The gear-driven 4WD GF-02 chassis features its motor in a low, central position in the lightweight, durable monocoque frame, and transmits power to front and rear via gears. The long wheelbase and wide tread setup ensures stable off-road performance. The slim frame features ladder/pipe motifs and features integrated sealed gearboxes which help keep stones out. Front and rear gear differentials allow smooth cornering, while separately sold pinion gears offer a choice from three types of gear ratios, and a motor guard enhances reliability off-road. The 4-wheel double wishbone suspension employs four friction dampers, and the steering servo is positioned on the left with identical-length tie-rods. 4WD assembly kit, GF-02 Chassis, ESC included, Type 540 Motor, Clear polycarbonate Body,user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC MB CLK AMG 2002 TT-02 Silver p.
300047493€145.00
Article number: 300047493 Product: 1:10 RC MB CLK AMG 2002 TT-02 Silver p. Tamiya is proud to announce the release of the 2002 Mercedes-Benz CLK AMG Racing Version as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The streamlined 2-door coupe Mercedes-Benz CLK had a version with a 4-liter V8 engine capable of 470hp, that was a base for a racecar. It had enlarged front and rear fenders to mount thick tires, and its side sill spoilers and rear wing ensured improved aerodynamics. In the 2002 German Touring Car Masters, the racecar secured the Teams’ Championship. This kit recreates homologation version which inherits the racecar's powerful form with enlarged over fenders and rear wing, without sponsor logos. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.