RC buggy kit

RC buggys (2WD/4WD)

Tamiya 1:10 RC Holiday Buggy Bundle

Product bundle consisting of: 1:10 RC 2 WD Holiday Buggy 2010 DT-02 / RC-Reflex Pro 3 Electric Set   Article number: 300058470 Product: 1:10 RC 2 WD Holiday Buggy 2010 DT-02 Article number: 300058470 Product: 1:10 RC 2 WD Holiday Buggy 2010 DT-02 The Holiday Buggy was one of Tamiya’s classic R/C car kits from the 1970’s. It is available as a re-release assembly kit. The classic body comes mounted on the DT-02 chassis which has its battery pack loaded in the center of the bathtub frame providing excellent handling performance even on rough surfaces. The DT-02 machine is a simple 2WD chassis which features a straightforward, rugged design to ensure easy assembly and superb reliability while its 4-wheel double wishbone suspension offers agile handling. Combining exciting performance with user-friendliness, the DT-02 chassis is the perfect way for R/C novices to start enjoying the wonderful hobby of Radio Control. Note: When installing a regular sized 540 motor, the following parts are required: 17T Pinion Gear (part# 3515005) 3mm Grub Screw (part# 50576) Motor Plate (part# 4305125)     Article number: 500500091 Product: RC-Reflex Pro 3 Electric Set 500500091 RC-Reflex Pro 3 Electric Set is the ideal add-on set for ARR and kit models of cars and boats. The interference-free 2.4 GHz radio system with two fully proportional channels, servo reverse, trim, dual rate and fail-safe offers precise control. Includes: Mini receiver, CS-6 steering servo (6 kg, metal gears), 7.2 V/3000 mAh NiMH drive battery with Tamiya plug, 2-in-1 charger (max. 2 A), transmitter batteries and instructions.  

RC buggys (2WD/4WD)

1:10 Hotshot II (2024), RC assembly kit, 4WD

€229.99

The 1:10 Hotshot II (2024) is an RC assembly kit that brings back a classic 4WD buggy with a compact 390 mm length, 235 mm width and 160 mm height. Its shaft-driven layout sends power to all 4 wheels for confident running on loose ground, while the black body with orange line graphics and a large rear wing gives the model the sharp stance of a period off-road racer. The lightweight body and wing are formed in 0.7 mm polycarbonate, and the shell comes pre-cut and pre-painted in black, leaving the final livery to the updated sticker set. Underneath, the ABS monocoque frame and suspension arms use reinforced resin sections. The front and rear suspension work through a 4-wheel independent double wishbone layout, with CVA oil dampers II and a front stabilizer managing chassis movement as the buggy changes direction or crosses uneven terrain. Semi-pneumatic hybrid tires combine oval block and pin spike tread, and they are mounted on large-diameter one-piece nylon wheels. A Type 540 motor and ESC are included. Radio gear, a battery pack, a charger and paints are required separately. On a dirt track, packed gravel or a backyard course, the Hotshot II (2024) suits builders who want both assembly detail and active driving. The re-released 1987 design also gives the finished buggy strong shelf presence between running sessions.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Neo Scorcher, RC assembly kit, TT-02B

€149.99

Neo Scorcher brings late-1980s buggy style back onto the TT-02B platform with a polycarbonate body, a large rear wing and shaft-driven 4WD. At 380 mm long, 250 mm wide and 145 mm high, the 1:10 layout gives the buggy a broad off-road stance that looks purposeful on the bench and reads clearly once the body and markings are in place. The TT-02B chassis uses a 266 mm wheelbase, a 217 mm front tread and a 208 mm rear tread, shaping the buggy's balance through turns and over uneven ground. Front and rear 4-bevel resin differentials support smooth power delivery, while the 3-piece steering tie-rod manages front-end response with a simple, direct layout. A Type 540 motor and the kit-included pinion gear produce a 10.71:1 gear ratio. Sealed front and rear gearboxes help keep dust away from the drivetrain, and the top section can be removed by loosening 4 screws for access during maintenance. On a dirt track, hard-packed path or loose gravel section, the long-arm suspension and off-road tyre setup give the buggy the mechanical travel needed for repeated runs. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Plasma Edge II, RC buggy kit, TT-02B 4WD

€149.99

The 1:10 Plasma Edge II pairs a low, race-inspired buggy body with the TT-02B 4WD chassis for fast off-road driving and a focused assembly project. Fluorescent yellow star-dish wheels, square spike tires and the updated body graphics give the model a bright competition look that stands out on dirt, gravel and hard-packed ground. The TT-02B layout develops the TT-02 platform into buggy form with longer suspension arms, buggy bumpers and a chassis tub that carries the battery lengthwise. The R/C mechanism sits flat in the frame, a layout that helps keep mass low and centered through direction changes. White CVA shock units support the double wishbone suspension at all 4 corners, while motor cooling ducts and a receiver case add useful chassis detail around the running gear. The set also comes with stickers for the body and masking stickers for painting preparation, supporting a clean finish on the polycarbonate shell. In the workshop, the detailed illustrated assembly instructions guide the build from chassis to body fitment. On the ground, the combination of 4WD traction, differential-equipped front and rear gearboxes, and square spike tires suits loose surfaces where the buggy can accelerate, turn and settle back into line with confidence. Electronic speed controller, 540 electric motor, polycarbonate body and kit parts are included. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Holiday Buggy 2010, RC assembly kit, 2WD

€144.99

The 1:10 Holiday Buggy 2010 RC assembly kit brings back a classic Tamiya buggy from the 1970s with the familiar body shape mounted on the DT-02 chassis. That combination pairs retro styling with a current hobby platform, creating a buggy that looks at home on dirt, gravel and uneven ground while keeping the mechanical layout easy to follow during the build. The DT-02 uses a bathtub frame with the battery pack loaded in the center, a chassis arrangement that helps distribute weight evenly through direction changes and rough sections. At the rear, the motor drives a 2WD transmission that keeps the drivetrain layout straightforward and accessible. Double wishbone suspension at all 4 wheels manages wheel travel through bumps, while the buggy format gives the model the ground-ready stance associated with classic off-road RC cars. The re-release format also preserves the identity of the original Holiday Buggy while placing it on a chassis designed for dependable running. On a compact track, a gravel path or a rough open patch, the chassis layout supports smooth steering corrections and stable corner entry as the surface changes. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Hornet EVO, RC assembly kit, 2WD buggy

€209.99

Hornet EVO brings the classic Hornet buggy shape back in a 1:10 RC assembly kit that ties anniversary styling to hobby-grade mechanical detail. The 0.7 mm polycarbonate body keeps the familiar silhouette from Item 58336, while the updated sticker design refreshes the black, yellow and orange racing look across the nose, sides and rear wing. Under the shell, the 2WD chassis uses the bathtub frame layout from Item 58336 and combines it with a Type 540 motor and an included ESC for electric rear-wheel drive. The suspension differs from Item 58336 with 4-wheel independent double wishbone suspension, CVA oil dampers, a revised rear gearbox and full ball bearings. Front ribbed tires and rear high-grip spike tires split steering and traction duties, giving each axle a distinct role on dirt and other loose surfaces. The clear body shell also leaves room for a custom painted finish that follows the supplied markings. On a compact off-road course, the exposed suspension, rear motor layout and large rear tires create the classic stance of a racing buggy as it accelerates out of turns and tracks across uneven ground. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Quirkhopper, RC assembly kit, GF-02 4WD

€219.99

The 1:10 Quirkhopper brings an unusual buggy silhouette to the GF-02 platform, combining a slim polycarbonate body with gear-driven 4WD for confident running away from smooth tarmac. Its insect-like shape stands out immediately, and the low motor position in the centre of the chassis helps keep the layout balanced when the model changes direction on gravel, packed dirt or uneven ground. The GF-02 chassis uses a lightweight monocoque frame with ladder and tube motifs that give the structure a distinctive technical look. Power reaches the front and rear axles through gears, and separately available pinions allow 3 different gear ratios to tune the drive setup. An engine guard adds protection in off-road use, while the electronic speed controller is included in the kit. Front and rear axle differentials help the buggy track through bends with smoother wheel speed compensation across the drivetrain. Double wishbone suspension at all 4 corners works with 4 friction dampers to manage bumps and ruts during outdoor sessions. Radio gear, a battery pack, a charger and paints are required separately. On a garden track, compact dirt course or gravel path, the Quirkhopper combines scale building detail with lively off-road character.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Super Avante, RC assembly kit, 4WD

€349.99

The 1:10 Super Avante RC assembly kit pairs the TD4 chassis with a low, futuristic buggy form built for fast off-road running. Shaft-driven 4WD and a midship transverse motor layout give the chassis a balanced power path, while the blue and yellow body, rear wing and yellow wheels create a sharp racing presence on dirt and gravel. At the front, the inboard suspension works through push rods and rocker arms that actuate laid-down oil dampers, a layout more often seen in competition-focused designs. The rear end uses 4 CVA oil dampers, and both front and rear suspension systems are independent double wishbones. Sealed front and rear gearboxes with built-in ball differentials support consistent drivetrain action when the surface turns loose or uneven. The polycarbonate body shell is joined by separate front and rear fenders and a rear wing, giving the buggy its distinctive Super Avante silhouette. Radio gear, a battery pack, a charger and paints are required separately. On a compact dirt track, the knobby tyres and 4WD layout support repeated launches, braking points and quick line changes. Open gravel sections and uneven ground let the suspension travel, oil dampers and sealed driveline show their strengths in sustained running sessions.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 The Grasshopper i 2005, RC buggy kit, 2WD

€119.99

The Grasshopper i 2005 brings classic 1:10 RC buggy style into a build centered on rear-wheel-drive action, a lightweight 830 g layout and the unmistakable stance of an 80s-inspired off-road racer. Its polycarbonate body, detailed illustrated assembly instructions, electronic speed controller and 380 electric motor come in the kit, creating a clear starting point for hands-on assembly and outdoor running. The chassis measures 389 mm long, 223 mm wide and 135 mm high, giving the buggy a low, planted profile with enough width for stable tracking on loose ground. At the front, independent swing axle suspension handles steering inputs with visible mechanical movement, while the rolling rigid rear axle preserves the original Grasshopper character. A sealed rear gearbox helps protect the differential gear when the buggy is driven on dirt and other rough surfaces. The chassis is also compatible with a 540 type motor sold separately, which opens the door to a later power change without changing the model identity. On compact off-road courses, packed gravel or smooth tarmac, the 2WD layout creates a direct connection between throttle input and rear traction. The illustrated build process suits hobby sessions at the workbench, and the finished buggy carries that same mechanical clarity into running sessions where suspension travel, tyre stance and classic racing lines stay fully visible. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 BBX 2WD Buggy, RC assembly kit, BB-01

€339.99

The 1:10 BBX 2WD Buggy brings classic off-road buggy styling together with a newly designed BB-01 chassis built for detailed assembly and rough-surface running. At 414 mm long, 233 mm wide and 136 mm high, with a 283 mm wheelbase, the layout gives the model a planted stance that suits the exposed cage structure and low, tapered body shape. The 0.7 mm polycarbonate body was designed by Atsushi Arino and divided into 3 sections to recreate the lower profile of a full-size utility vehicle. Suspension geometry follows that theme with front double wishbones, A-shaped arms and long rear trailing arms, while 4-wheel independent suspension uses CVA oil dampers and front and rear aluminum aeration dampers. A TA06 rear differential broadens compatibility with Grade-Up parts, and new metal-plated beadlock type wheels are paired with large-diameter tires for the finished look. The kit also includes a driver figure, oil filled diff, monocoque chassis frame and ball bearings. The removable rear roll cage opens access around the motor area for maintenance between running sessions or setup changes. Radio gear, a battery pack, a charger and paints are required separately.

RC buggys (2WD/4WD)

1:10 Dark Impact, RC buggy kit, 4WD DF-03

€219.99

The 1:10 Dark Impact is an RC buggy kit built around the DF-03 chassis, combining shaft-driven 4WD with a mid-rear motor layout for balanced off-road running. At 425 mm long, 230 mm wide and 150 mm high, the buggy carries a low racing stance with the ground clearance and suspension travel needed for dirt tracks, jumps and uneven sections. A longitudinal battery position supports the chassis balance, and the battery loads through the bottom of the frame so routine access does not require body removal. Full ball bearings reduce drivetrain friction across the running gear, while steel drive shafts with joint cups and a main shaft with steel pinion gear support the transfer of power. The suspension uses extra long arms, rear racing uprights and independent double wishbones to keep the buggy composed when the surface breaks up. An aluminum motor mount plate adds a rigid mounting point, and the internal gear ratio is 2.94. A 540 type motor is included. On a hard dirt track, the larger diameter and width of the off-road tire setup help the buggy settle into ruts and carry speed through linked corners. The rear wing and low body shape give the model a focused racing look on the stand between runs. Radio gear, a battery pack, a charger and an electronic speed controller are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Fighter NXGEN DT-04, RC assembly kit

€159.99

The 1:10 Fighter NXGEN DT-04 is an RC assembly kit built around a newly designed 2WD rear-wheel drive chassis with the look of a full-size racing buggy. Multiple body panels connect to pipe frames, giving the model an open, competition-inspired shape, while the dimensions of 395 mm with the 265 mm wheelbase or 404 mm with the 280 mm wheelbase, 248 mm width and 120 mm height create a broad, planted stance. Its drivetrain layout places the motor at the rear and the battery pack inline in the chassis, a combination that directs weight toward the driven wheels. The sealed gearbox has a built-in gear differential for smoother cornering and added protection from dust and dirt. Side pontoons place the ESC on the left and the receiver on the right for a tidy internal layout. The 3-piece steering tie-rod is used here for the first time in this series, and rear damper attachment positions plus rear upper arms can be changed for setup tuning. Ribbed front tires and square spike rear tires split steering and traction duties clearly, while front hex hubs allow different wheels to be fitted. Battery changes stay practical at the track: turn the hood lever, remove the side pins, lift the roof and slide the driver figure forward to reach the pack from above. Many separately sold DT-02 and DT-03 parts are compatible for further setup changes. ESC and a Type 540 Torque-Tuned Motor are included. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Hotshot II Blockhead Motors, RC assembly kit

€269.99

The 1:10 Hotshot II Blockhead Motors RC assembly kit brings back the 1987 Hotshot II with a custom buggy look shaped around Jun Watanabe's BLOCKHEAD MOTORS sticker design. At 390 mm long, 235 mm wide and 150 mm high, the model combines classic 4WD proportions with a raised driver position and a vivid blue finish that stands out on the shelf and on the track. The pre-cut polycarbonate bodyshell is 0.7 mm thick and arrives pre-painted, while cutlines and hole marks follow the original Hotshot II body layout. A shaft-driven 4WD system gives the chassis its period-correct mechanical character, and sealed gearboxes with differentials support the drivetrain layout. The suspension pairs double wishbones with a front stabilizer, 1 front transverse damper and 2 rear CVA II oil dampers for a distinctly technical off-road setup. Matte-finish metal-plated uprights and wheels reinforce the custom presentation, and the set also contains number plates, light pods, side plates, window nets and a dummy antenna for added scale realism. A Type 540 motor and an electronic speed controller are included. On a workbench, the kit offers a focused build with visible chassis detail, custom graphics and classic buggy hardware. Once assembled, the Hotshot II Blockhead Motors suits display, collection and RC running with a body style that links early Tamiya 4WD racing history to a fresh custom treatment.

RC buggys (2WD/4WD)

1:10 The Grasshopper Black Edition, RC buggy

€114.99

The Grasshopper Black Edition brings the classic Tamiya off-road silhouette into 1:10 scale with a darker visual treatment that gives the buggy a crisp, purposeful presence in motion and at rest. As a radio-controlled ground vehicle, it combines the recognisable single-seat racer shape with hands-on driving input, creating a model that stands out both as a build and as a running machine. The Black Edition designation shifts the look away from the standard finish and places more emphasis on the body form itself, so the buggy reads clearly from nose to rear wing. The 1:10 format gives the model a substantial footprint for steering, throttle control and line choice across smooth outdoor surfaces. Battery-powered operation is part of the driving concept, while batteries are not included. The data identifies this version as part of Tamiya's powered vehicle range, placing it firmly in the RC hobby space rather than static display alone. On a paved path, patio or similar open area, the buggy format lends itself to repeated starts, direction changes and short runs that keep the radio-control experience active. Between driving sessions, the dark finish and familiar Grasshopper profile also give the model a strong shelf presence for collectors who appreciate long-running RC names.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 The Grasshopper II, RC buggy assembly kit

€119.99

The Grasshopper II returns in this 2017 1:10 R/C buggy assembly kit with the lean proportions, exposed suspension and rear-drive layout that made the original late-1980s machine so distinctive. At 400 mm long, 221 mm wide and 139 mm high, the model carries a compact off-road stance that looks right at home carving across packed dirt and loose gravel. An ABS resin bathtub chassis forms the core structure, keeping the running gear organized in a simple, accessible layout. The kit uses a 2WD drivetrain and a fully enclosed rear gearbox, so the differential works inside a protected housing while the rear axle delivers power to the ground. One-piece 8-spoke wheels pair with ribbed front tyres and spike rear tyres, a classic buggy combination that separates directional control from traction. A 380 size motor and electronic speed controller are included, and the platform is also compatible with selected tune-up parts such as standard Type 540 motors and CVA mini oil dampers. The white polystyrene resin body gives painting and decal work a crisp base, and the included driver figure adds cockpit detail once attached to the shell. Radio gear, TS spray paint, a 7.2 V battery and a compatible charger are required separately. On a garden path, hard-packed track or dusty open ground, the suspension movement, rear-drive balance and period buggy styling come together in a model that suits both display between runs and regular outdoor driving sessions.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 The Hornet 2004, RC buggy kit, 2WD

€134.99

The Hornet 2004 brings classic off-road buggy form into a 1:10 RC assembly kit with a long, low stance and rear-wheel drive layout built for loose surfaces. At 400 mm long, 230 mm wide and 150 mm high, the chassis cuts a recognisable silhouette on dirt tracks, with the clear polycarbonate body and rear wing giving the finished model its period racing look. The bathtub frame chassis uses side bumpers to shield the main structure during close running, and the reinforced resin bumper adds another contact point at the nose. Weight comes in at 874 g, keeping the buggy light enough for quick direction changes while the sealed gearbox encloses the differential area against dust and grit. The kit also includes a TEU-101BK electronic speed controller, and the original 3-piece wheels leave room for optional ball bearings if a later upgrade is planned. A driver figure sits in the cockpit to complete the visual finish without turning the build into a static display piece. On compacted dirt, loose gravel or a backyard track, the front ribbed tires guide turn-in while the spiked rear tires dig in under acceleration. Radio gear, a battery pack, a charger and paints are required separately.

RC buggys (2WD/4WD)

1:10 The Hornet by Jun Watanabe, RC buggy

€144.99

The Hornet by Jun Watanabe takes the familiar 1:10 RC buggy format and gives it a striking fashion-led finish. The white bodyshell carries oversized black polka dots, while pink front wheels, purple chassis parts and pink to purple side graphics create a look that reads clearly even at speed across open ground. The studio details show a buggy built around classic off-road cues rather than a closed touring shape. An enclosed cockpit with driver figure, a front bumper bar and a large rear wing define the silhouette, while the black windshield frame and round white front lights sharpen the contrast across the body. Rear paddle tyres indicate a setup aimed at loose terrain such as sand, where the tread can dig in and help the driven axle find traction. Visible coil-over shocks and exposed suspension arms underline the mechanical layout and keep the chassis character on show instead of hiding it under bodywork. This version suits shelf display as strongly as running sessions, because the graphic treatment stays readable from a distance and the color blocking picks out the buggy lines from every angle. Radio gear, a battery pack and a charger are required separately.

RC buggys (2WD/4WD)

1:10 Neo Fighter Buggy, RC buggy, DT-03 chassis

soon available again

The 1:10 Neo Fighter Buggy combines the DT-03 chassis with a slim buggy body and rear wing for fast off-road running on dirt and rough ground. At 400 mm long, 248 mm wide and 132 mm high, the layout gives the model a planted stance, while the 287 mm wheelbase helps it track steadily through bumpy sections and open turns. The impact-resistant monocoque frame keeps the battery and R/C equipment aligned along the centerline, which supports even weight distribution through jumps, landings and direction changes. Front and rear track widths of 221 mm and 208 mm shape the buggy's footprint, and the wheel sizes of 27 x 80 mm at the front and 41 x 86 mm at the rear match the different jobs of steering and drive traction. A sealed rear gearbox helps keep dust and dirt away from the drivetrain during outdoor running. The front bumper adds a practical contact point at the nose when the buggy meets ruts or track edges. The clear polycarbonate shell leaves room for custom finishing, so the buggy can head onto a practice track, a packed dirt lot or a rough garden course with its own look. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Racing Fighter The Real, RC assembly kit

soon available again

The 1:10 Racing Fighter The Real is an RC assembly kit built on the DT-03 chassis, combining a lightweight polycarbonate buggy body with a monocoque tub frame made for off-road running. Boxy body lines, a front bumper and a rear wing give the model a clear racing stance, while the 288 mm wheelbase and wide tread measurements of 221 mm at the front and 208 mm at the rear set up a planted footprint on loose ground. At the center of the build is a rear-mounted 2WD drivetrain with a sealed rear gearbox and internal gear differential. The front arms sit at a 25-degree angle, and the suspension uses double wishbones with independent front and rear action to keep the chassis composed over ruts and bumps. CVA oil dampers manage wheel movement with a more settled response than friction shocks, and the tyre layout is tuned to the buggy format, with grooved front tyres and pin spike rear tyres. The kit also comes with a 540 Torque Tuned motor and a TBLE-02S electronic speed controller that supports brushed and brushless motors. On a dirt track, packed gravel or a rough open patch, the DT-03 layout gives the build a focused off-road character with visible suspension action and rear-drive balance through corners. Radio gear and a battery pack are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 The Frog 2005, RC buggy kit, 2WD reissue

soon available again

The Frog 2005 brings back a landmark 1:10 RC buggy format as a reissued 2WD assembly kit with the distinctive stance, exposed chassis layout and off-road racer look that made the original design stand out. The polycarbonate body and ABS space frame give the model its recognizable mix of light structure and visible mechanical detail, creating a build that looks technical even before the first run. A differential gear manages power transfer at the rear axle for smoother cornering, while the front steering linkage, suspension arms and bumper shape the buggy's direct, purposeful front end. The rear-mounted electric motor sits beside the gearbox in a layout that leaves the drivetrain easy to understand during assembly and maintenance. A driver figure in the cockpit adds period character to the finished model, and the body shell leaves room for paintwork that can follow the reissue graphics or a custom finish. Radio gear, a battery pack, a charger and paints are required separately. On dirt, gravel and other loose surfaces, the combination of 2WD drive, long-travel suspension and axle-specific tire pattern gives the buggy a lively off-road feel with visible weight transfer through turns and over bumps. The reissued format also suits display between runs, with the open frame, white wheels and classic racing silhouette giving The Frog 2005 a strong shelf presence.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Wild One OR Blockhead Motors, RC assembly kit

soon available again

The 1:10 Wild One OR Blockhead Motors RC assembly kit brings classic off-road buggy proportions together with a custom light blue finish and BLOCKHEAD MOTORS graphics. At 425 mm long, 225 mm wide and 140 mm high with a 255 mm wheelbase, the model carries a broad, low stance that suits fast runs across dirt and loose ground. The pre-cut polycarbonate body is 0.7 mm thick and arrives pre-painted, while metal-plated parts on sections A, E and G plus the front and rear wheels sharpen the visual contrast across the build. Window nets, number plates and a dummy antenna add extra scale detail, and the new sticker set designed by Jun Watanabe's brand BLOCKHEAD MOTORS gives this version its own identity. Radio gear, a battery pack, a charger and paints are required separately. Under the shell, the chassis layout focuses on off-road running with an ABS box-type frame, 4-wheel independent trailing arm suspension, coil springs and dogbone-type driveshafts with dust covers. The enclosed gearbox uses differential gears to keep the drive smooth as the buggy changes direction. On a gravel path, packed dirt track or open hard ground, the long wheelbase and suspension travel support a stable, lively run while the detailed body and plated parts keep the model striking when parked between sessions.

RC buggys (2WD/4WD)

1:10 Sand Viper, RC assembly kit, DT-02 buggy

available in stores

The Sand Viper brings 1:10 scale buggy action to the DT-02 platform with a 2WD drivetrain, a newly designed body and wing shape, and the kind of off-road layout that suits loose ground, dusty tracks and compacted dirt. Its transverse Type RS540 motor sits within a chassis format built for clear power delivery and straightforward mechanical balance during running. The DT-02 setup combines 4-wheel independent double wishbone suspension with oil dampers, so each corner can react more cleanly over uneven terrain. Upper suspension arms use double-ended shafts, which enable camber adjustment for tuning the wheel angle to the surface and driving style. Full ball bearings reduce drivetrain friction across the running gear, helping the buggy make better use of motor output. A fully sealed differential gearbox keeps stones and dirt away from the internal gears, supporting smoother operation in off-road conditions. The kit also includes a TEU-101BK electronic speed control. Radio gear, a battery pack, a charger and paints are required separately. On the ground, the combination of wide grooved front tyres and spiked rear tyres gives the buggy a distinct front-to-rear setup for steering guidance and rear bite. Dish wheels, the low buggy profile and the separate rear wing create a focused competition look whether the model is running through a dusty corner or standing still between sessions.

RC buggys (2WD/4WD)

The Bigwig (2017)

available in stores

Article number: 300047330 Product: The Bigwig (2017) Tamiya is delighted to announce the comeback of a classic – The Bigwig (original Item 58057), which was a 4WD buggy released back in 1986 to commemorate 10 years of Tamiya R/C models and was the first Tamiya car with a body penned by an outside designer: Japanese full size race car designer and team owner Takuya Yura. This re-release version is based closely upon the original, with some tweaks to bring it up to date. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 390mm, width: 234mm, height: 163mm. • Aerodynamic body is lightweight and durable polycarbonate. Engine and exhausts are depicted by chassis parts. • Utilizes a sturdy ABS resin bathtub-type chassis. • Shaft-driven 4WD drivetrain for excellent stability off-road, with full ball bearings ensuring minimal power loss. • 4-wheel double wishbone suspension with CVA oil dampers lets the car tackle bumpy surfaces with confidence. • Rack and pinion steering (the only of its kind on a Tamiya model) gives excellent driving feel. Boots cover the steering tie-rods, and anti-wear grease is included in the kit to seal the mechanism from dirt and gravel. • "Aerodish" 1-piece wheels are combined with oval block pattern tires for superior grip. • Stickers have been redesigned while keeping to the overall theme of the original. • Includes a GT-Tuned motor (25T) with sticker unique to this model. • ESCs 22mm and lower in height can be fitted in the kit standard position. • Utilizes the 25T GT-Tuned Motor. • For use with Tamiya 7.2V and 6.6V LF battery packs. • Sticker designs updated but keep the air of the original. • For use with electronic speed controller. • Anti-wear grease included to better protect rack and pinion.   Warning! Not suitable for children under 14 years.