RC Screws & ball head screws
Are you looking for suitable screws, ball heads or other assembly material for your RC models? Here you will find everything you need to complete your vehicles or to maintain and improve them optimally!
RC Screws & ball head screws
Are you looking for suitable screws, ball heads or other assembly material for your RC models? Here you will find everything you need to complete your vehicles or to maintain and improve them optimally!
More
Screws & ball head screws
2mm/M2 Lock Nut Mini 4WD hardware set
300094690€4.99
This hardware set brings 10 compact M2 lock nuts into Mini 4WD maintenance, repair and fresh assembly work. The 2 mm format suits small threaded connections, while the lock-nut construction with a nylon insert ring is designed to hold more firmly once tightened, a useful detail on fast-moving model assemblies where vibration can work against standard fasteners. The close-fitting hex shape supports careful tool use on small parts, and the metal finish gives each nut a clearly defined edge during installation. Keeping matching M2 hardware together also helps maintain a consistent fit across repeated rebuilds, part swaps and setup changes. Because the pack contains 10 pieces, it covers multiple fastening points and leaves spares ready for later workshop use. The set is focused, simple and specific: small fastening hardware for Mini 4WD systems where the right thread size matters. On the bench, these lock nuts suit routine replacement after wear, rebuilding a chassis with fresh hardware, or keeping spare fixings ready in a parts box between race-day adjustments. They also fit neatly into a regular stock of model workshop essentials, alongside the screws, shafts and brackets used in ongoing Mini 4WD upkeep. Warning! Not suitable for children under 14 years.
Screws & ball head screws
2x8mm Differential Tapping Screws, model spare set
300050573€3.29
This spare screw set focuses on one specific workshop need: 10 matching 2x8 mm differential self-tapping screws for compatible model maintenance and repair. The uniform size keeps replacement work consistent when original fasteners are worn, missing or set aside during a rebuild, and the metal construction suits repeated use in model assembly tasks where a precise screw type matters. The domed heads use a crosshead drive, allowing the tool to seat cleanly during installation and removal. A fully threaded shaft is suited to fastening duties where the thread needs to bite along the full length of the screw rather than only near the tip. Because all 10 screws share the same format, the set supports organized parts storage and avoids mixing unmatched hardware into a differential assembly. The pack contents are stated plainly: 10 differential self-tapping screws. On the bench, this set fits naturally into routine servicing, replacement of lost fasteners, or preparation of spare hardware before a rebuild begins. It also works as a practical stock addition for model toolboxes and parts drawers, where a clearly defined 2x8 mm screw can save time during maintenance on compatible assemblies. Warning! Not suitable for children under 14 years.
Screws & ball head screws
2x8mm Hex C-sunk Head Tapping Screw, model screws
319804477€5.99
This pack contains 10 hex C-sunk head tapping screws in a 2x8 mm size for model building, maintenance and parts replacement. The countersunk head sits into a matching recess so the fastening point stays level with the surrounding surface, which is useful where body panels, brackets or other fitted parts need a neat finish. The tapping design forms its thread directly in the receiving material during installation, making these screws suitable for compatible model assemblies that use self-tapping hardware. The 2 mm diameter and 8 mm length place them in the small-format hardware range used for detailed fastening jobs, and the hex head gives a defined drive point for controlled fitting. As workshop stock, a 10-piece pack helps keep replacement fasteners on hand when a build is interrupted by missing or worn screws. These screws fit naturally into bench tasks such as replacing lost hardware, refreshing older assemblies or securing parts during a rebuild. In regular model maintenance, having the same head style and size ready can keep repairs consistent across compatible sections of a project. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3mm Washer MA14, model accessory, 15-piece set
300050586€3.09
This MA14 washer set brings a straightforward supply of 15 matching 3 mm washers to the workbench, supporting model maintenance, replacement tasks and assembly jobs that call for correctly sized small hardware. The compact format suits builders who need a ready reserve for routine parts handling rather than a mixed assortment. Each washer is identified in the data as 3 mm Washer and grouped under Models Supplies, placing it clearly in the spare-parts and workshop-accessory side of model building. The 15-piece count gives a practical quantity for keeping common hardware on hand during repairs or when an existing build needs fresh fastening components. The MA14 reference helps distinguish this set from other small parts in a broader workshop stock, especially where several washer sizes may be stored together. On the bench, a dedicated washer pack like this supports cleaner preparation before assembly starts and quicker replacement when a small part is missing during maintenance. It also fits neatly into organised spares storage, where size-specific hardware can be sorted by reference and reached quickly for the next build session.
Screws & ball head screws
3x10 Tapping Screw BK, model screw set, 10 pcs
309804392€6.19
This screw set supplies 10 black 3x10 tapping screws for model assembly, replacement work and workshop stock. The compact format suits builders who need the exact fastener type stated on a parts list or want matching hardware ready for routine maintenance on compatible models. The 3x10 specification gives a direct reference for size, which helps when sorting spare hardware for repairs or preparing parts before a build begins. The black finish supports a uniform appearance on visible fixing points where darker hardware is preferred. As tapping screws, these fasteners are intended for fastening duties in suitable model applications where this screw type is required. The pack count of 10 pieces provides a practical quantity for replacing missing screws, refreshing used fixings or keeping a small reserve in the workshop. On the bench, this set fits naturally into regular maintenance tasks such as securing parts after disassembly or replacing worn hardware during a rebuild. It also works well as a dedicated spare pack kept alongside model tools and sorted fasteners, ready when the correct 3x10 tapping screw is needed. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x10mm Steel CS HexHead Screws, model hardware
300051629€2.89
These 3x10mm Steel CS HexHead Screws are replacement model hardware for fastening points that require a countersunk head and a hex socket drive. The steel construction and fully threaded shafts support firm seating in compatible assemblies, while the black finish matches the clean, technical look often used in model components. Each screw uses a flat tapered head that sits flush when installed in the correct countersunk opening, which helps maintain proper part alignment on compatible builds and repairs. The 3x10mm size is the key fit detail for matching existing hardware, and the pack of 10 gives a ready supply for workshop drawers, routine servicing or targeted replacement of missing fasteners. The hex socket head is designed for secure tightening with the appropriate tool, making it suitable for controlled maintenance work where a precise fit matters. Used as spare hardware, these screws suit regular upkeep on compatible model vehicles and assemblies that call for this exact specification. They can be kept on hand for repair sessions, rebuilds or scheduled parts replacement, especially when worn fasteners need to be changed before they affect how connected parts stay in place.
Screws & ball head screws
3x10mm Steel Hex Head Screws, model hardware
300051628€2.89
These 3x10 mm steel hex head screws bring precise fastening to model maintenance, repair and assembly work. The steel construction and threaded shaft support a firm hold in compatible mounting points, while the hex socket head is shaped for secure tool engagement during tightening and removal. With 10 matching screws in the pack, this hardware set suits routine workshop stock as well as targeted replacement jobs on frequently serviced models. The 3 mm diameter and 10 mm length provide a clearly defined format for builds and repairs that call for this exact screw size. The rounded button-style head sits neatly against mounted parts, and the fully threaded shaft is suited to fastening tasks where even thread contact matters across the full length. On the bench, these screws fit naturally into rebuilds, part swaps and general upkeep between running sessions. Keeping the correct fastener size close at hand helps avoid delays when worn or missing hardware needs to be replaced, and a matching 10-piece set makes it easier to maintain consistency across repeated service work.
Screws & ball head screws
3x12mm Counter Screw, model screw set, 10 pieces
300050581€3.29
This screw set provides 10 matching countersunk screws in a 3 x 12 mm format for model assembly, maintenance and hardware replacement. The flat countersunk head supports a flush finish on compatible parts, which helps keep surfaces even where protruding fasteners would interfere with fit or movement. The set is supplied as metal fastening hardware and suits tasks that call for the same stated size across several fixing points. A 12 mm length gives reach through compatible layered parts, while the 3 mm diameter defines the thread size for matching holes and receiving material. Because all 10 screws share the same format, the pack works well for replacing lost fasteners in groups rather than mixing different sizes during a repair. The pointed threaded shafts are shaped for fastening use, and the Phillips drive allows controlled tightening with a matching screwdriver. On the workbench, the set supports routine upkeep of model builds, spare-parts sorting and planned rebuilds where identical hardware is needed across several positions. It also fits neatly into parts storage for future service jobs, keeping a clearly specified screw size ready when a compatible assembly calls for 3 x 12 mm countersunk fixings. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x12mm Steel CS HexHead Screws, model accessory
300051631€2.79
These 3x12mm Steel CS HexHead Screws are a focused workshop accessory for maintaining compatible model and RC assemblies. The steel construction provides the specified material for replacement use, while the countersunk screw form is made to sit into matching recessed mounting points for a flush finish. Each screw uses a hex head, giving a defined tool interface for secure tightening during fitting and servicing. The pack contains 10 screws, which makes it useful for routine maintenance, repair work, or keeping matching fasteners ready in the parts box. The 3x12mm size is the key reference for checking compatibility with the intended assembly point, especially where the original build calls for the same thread and length. As replacement hardware, these screws are suited to restoring firm connections after wear, loss, or repeated disassembly during setup changes and repairs. On the workbench, they fit naturally into regular service tasks such as refreshing mounting points on a chassis, reattaching compatible sections, or replacing individual fasteners before the next run. For model builders who keep spare hardware sorted by size, this 10-piece set adds a clear, easy-to-store option for ongoing maintenance. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x12mm Steel Hex Head Screws, model hardware
300051630€2.89
These 3x12mm steel hex head screws are small but essential model hardware for keeping compatible assemblies firmly fastened. The steel construction and hex head shape support a secure connection at fastening points where a precise fit matters, whether replacing worn screws or completing routine maintenance on a model car. Each screw measures 3x12mm and uses a fully threaded shaft, making the set useful wherever that exact size is required. The pack contains 10 matching screws, giving enough hardware for several mounting points or for keeping spares on hand in a workshop drawer or parts case. The silver metallic finish matches the straightforward function of workshop hardware and makes each screw easy to identify among other small components. On a repair bench, during a rebuild, or while refreshing frequently used running gear, replacement fasteners help keep compatible model sections properly attached. This set suits regular upkeep of model vehicles and other assemblies that use the same screw format, with the hex head allowing controlled tightening during fitting and replacement work.
Screws & ball head screws
3x14 mm Step Screw, spare part for TT-01 TA-01
300050582€3.39
This spare part set supplies 5 step screws in a 3x14 mm format for TT-01 and TA-01 model applications. The defined dimensions support a direct hardware match where this specific fastener size is required, whether a missing screw needs replacing or an existing build needs the correct fitting part restored. Each screw has a stepped profile that combines a rounded head, a smooth shaft section and a ribbed lower section. That shape suits fastening points designed for this hardware style and helps maintain the intended connection between compatible model parts. With 5 matching screws in one pack, the set covers small repair jobs and routine workshop replenishment without mixing different sizes. On the bench, these screws suit rebuilds, maintenance sessions and parts sorting for ongoing chassis care. The compact 3x14 mm specification also makes the set practical as reserve hardware for TT-01 or TA-01 projects where the correct screw type needs to stay close at hand. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x15mm Tapping Screw, model accessory, 10-pack
300050583€3.39
This 10-pack of 3x15 mm tapping screws is a focused workshop spare for model maintenance, repairs and ongoing assembly needs. The exact 3x15 mm size gives a clear match point when worn, missing or damaged fasteners need to be replaced with the same format, and the TA-01 and TA-02 designation identifies the intended application directly in the part name. The set consists of 10 silver metal screws with a threaded shaft, rounded pan head and cross-head drive as shown in the product image. That head shape supports secure seating against the mounted part, while the cross-head recess allows controlled tightening with a suitable screwdriver. Keeping identical screws together in one pack helps maintain a consistent fit across the relevant fixing points instead of mixing different lengths or thread types during service work. On the bench, this kind of hardware is useful for routine chassis upkeep, replacing lost fasteners after disassembly, or keeping matching spares ready between rebuilds. For TA-01 and TA-02 based model work, the pack offers a straightforward way to restore the specified fixing point with the correct screw format.
Screws & ball head screws
3x5mm Flathead-Screw, model screw set, Phillips
300051211€2.89
This screw set supplies 5 matching 3 x 5 mm flathead fasteners for model building, maintenance and hardware replacement. The compact size and crosshead design make the screws easy to identify at the bench, while the flat head sits neatly against compatible parts for a clean, flush connection. Each screw has a Phillips-style drive and a short machine thread, as shown by the defined head shape and threaded shaft. That combination suits small fastening points where controlled tightening matters and where oversized hardware would interfere with surrounding parts. The set is useful when an original screw is lost during assembly, when worn hardware needs replacing, or when a matching group of fasteners is needed for a repair. The black finish keeps the hardware visually understated on many technical builds. On a workbench, these screws fit naturally into routine model care: securing a bracket, refitting a cover, or restoring a connection after disassembly. Kept alongside other spare hardware, the 5-piece pack provides a practical reserve for compatible model sections that call for the same 3 x 5 mm format. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x6mm Steel CS HexHead Screws, model hardware
300051625€2.89
These 3x6mm Steel CS HexHead Screws provide compact fastening hardware for model maintenance, repairs and fresh assembly work. The steel build pairs a countersunk head with a hex socket drive, so each screw can sit flush in a matching recess while allowing firm, controlled tool engagement during installation. In the pack are 10 matching screws, shown with a dark metal finish and short threaded shafts suited to precise mounting points. The 3x6mm size makes this hardware relevant wherever that exact thread and length are specified in a compatible model or accessory assembly. A countersunk head is used where the screw needs to settle into the surface rather than stand proud, which helps preserve clean part alignment around plates, brackets or other fitted sections. The hex socket format also reduces the chance of slipping compared with a simple slotted head when careful tightening is needed on small-scale assemblies. These screws fit naturally into routine workshop tasks such as replacing worn fasteners, securing parts after servicing, or keeping spare hardware on hand for future adjustments. On RC cars and other model builds, timely replacement of damaged mounting hardware helps maintain consistent fit at the fastening point and supports reliable running after repeated use. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x6mm Steel Hex Head Screws, model accessory
300051624€2.89
These 3x6 mm steel hex head screws are replacement fastening hardware for model maintenance, repair and parts changes. The steel construction and internal hex drive support secure tightening with a matching tool, while the compact size suits smaller mounting points where consistent hardware dimensions matter. Supplied as a set of 10, they provide a practical stock of matching screws for workshop drawers, pit boxes or spare-parts cases. The rounded head shape and fully threaded shaft are suited to refitting components that rely on small, uniform fasteners. When an original screw is worn, lost or damaged, replacing it with the same 3x6 mm format helps preserve the intended fit at the fixing point. The dark metal finish keeps the set visually consistent, and the identical sizing across all 10 pieces simplifies sorting and selection during repair work. On a workbench, these screws suit routine servicing, rebuilds and hardware replacement on model assemblies that call for this exact size. They are also useful to keep on hand as spare fastening hardware, ready for quick swaps when a repair should not be delayed by a missing screw. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x8mm Steel CS HexHead Screws, model hardware
300051627€2.89
These 3x8mm Steel CS HexHead Screws are model hardware for maintenance, repair and replacement work on compatible assemblies. The steel construction and countersunk head shape suit mounting points where the screw needs to sit flush with the surface, while the hex socket is designed for controlled installation with an Allen key style tool. The set contains 10 matching screws, making it useful for replacing lost fasteners or refreshing worn hardware in one go. Each screw combines a threaded shaft with a countersunk profile, a format often used where clean seating and secure fastening matter to the fit of surrounding parts. In regular workshop use, spare hardware like this helps keep a build mechanically consistent instead of mixing different screw types or sizes. The 3x8mm specification gives a clear reference when matching existing fittings on a compatible model. Kept in a parts box, the set is ready for routine servicing, rebuilds or targeted repairs after wear. It also suits bench work where a damaged fastener needs to be exchanged quickly so the assembly can return to proper running condition.
Screws & ball head screws
3x8mm Steel Hex Head Screws, model accessory
300051626€2.89
These 3x8 mm steel hex head screws are a compact spare parts accessory for model maintenance, repair and ongoing workshop use. The steel construction provides the stated material specification, while the hex socket head is shaped for controlled tightening with the matching driver. In the pack, 10 matching screws are supplied for direct replacement where the same size and head type are required. The 3x8 mm measurement gives a clear reference for fit when replacing worn or missing hardware on compatible assemblies. Their machine screw form suits fastening points that rely on threaded metal hardware rather than clips or push pins. The internal hex drive helps apply torque through the center of the head, which is useful when working in small spaces common to model chassis and related components. As a spare parts set, the focus stays on restoring the original fastening function with the correct format rather than adapting a different screw type. In regular bench maintenance, a set of matching screws helps keep repairs consistent across repeated fastening points. For RC car servicing and rebuild work, timely replacement of worn hardware can help maintain proper assembly and keep compatible vehicles running as intended.
Screws & ball head screws
4 mm Adjuster M2, model accessory, 6-piece set
300050633€3.19
This 4 mm Adjuster M2 pack provides 6 matching ball pans for model maintenance, repair work and fresh assemblies that call for the same connection part throughout a linkage setup. The compact shape and M2 specification make the set a practical choice when worn or missing joint pieces need to be replaced with matching components. Each ball pan is supplied as a separate small part, so the pack can support several connection points in one project or stay on hand as workshop spares for later servicing. The 4 mm dimension gives a direct reference when matching existing hardware, while the uniform off-white moulded finish helps keep the parts easy to identify among other small model components. Scope of delivery: 6 ball pans. This set suits bench repairs, routine parts replacement and planned builds where identical linkage fittings are required across the assembly. It also works well as a stock spare for model toolboxes and hobby drawers, ready for the moment a control connection or adjuster point needs the same M2 and 4 mm format again. Warning! Not suitable for children under 14 years.
Screws & ball head screws
4 mm Flange Lock Nut, model hardware, 4 pcs.
309805557€3.99
This set of 4 mm flange lock nuts brings secure fastening to model maintenance and mechanical assembly work. Each metal nut pairs a hex outer shape with a built-in flange and a nylon insert, creating a self-locking connection that helps threaded joints stay in place when vibration and repeated movement are part of the job. The flange base supports a broader contact area than a standard nut alone, which can be useful where mounted parts need even clamping across the surface. The nylon ring inside the thread adds friction as the nut is tightened onto a matching bolt, so the connection resists backing off during running, transport or repeated handling. With 4 pieces in the pack, the set suits small repairs, hardware replacement and keeping spare fasteners ready at the workbench. The silver metal finish also makes the parts easy to identify among mixed model hardware. Used on model vehicles, mechanical linkages or general hobby assemblies, these lock nuts fit naturally into routine service tasks where dependable retention matters. They are a practical choice for replacing missing hardware, refreshing older builds or stocking essential workshop spares for future adjustments. Warning! Not suitable for children under 14 years.
Screws & ball head screws
4 mm Serrated Wheel Nuts, model accessory, steel
300042282€4.19
These 4 mm serrated wheel nuts are made for compatible 1:10 models and bring a clean, functional solution to wheel mounting and replacement work. The steel construction gives each nut the solid threaded form needed for repeated fitting, while the serrated base increases contact at the mounting point when tightened. In the workshop or at the track, that combination supports a firm connection between wheel and axle hardware. The set contains 8 wheel nuts, making it useful for complete wheel swaps as well as keeping matching spares ready for service intervals. The compact format suits routine maintenance jobs where lost or worn fasteners need to be replaced with the correct size. The metallic finish and flanged nut shape match the hardware style commonly used on model vehicle wheel hubs, and the threaded interior is designed for direct fastening rather than decorative use. As a dedicated accessory part, this set focuses on one specific task: securing wheel assemblies with the correct 4 mm steel nut. On a repair bench, the 8-piece count supports organized replacement across multiple corners of a chassis. During rebuilds or setup changes on compatible 1:10 models, the serrated contact face helps the nut seat with a more positive mechanical hold as the wheel is fitted and tightened. Warning! Not suitable for children under 14 years.
Screws & ball head screws
4mm Flange Lock Nut Bla (8), RC accessory set
300054642€3.89
This RC hardware set brings a clean wheel finish and a more secure fastening point to compatible model cars. Each 4 mm flange lock nut uses a nylon insert that grips the thread as the nut is tightened, helping the connection stay in place when the chassis is exposed to repeated vibration, direction changes and regular wheel removal. The set contains 8 blue flange lock nuts, shown as individual metal fasteners with a flanged base and visible locking ring. That flange gives the nut a broader contact surface than a plain hex nut, which helps distribute clamping force at the mounting point. The blue colour variation also changes the look of the wheel area, making it useful for refresh work on existing builds or for replacing standard hardware supplied in many RC kits. The parts are intended as accessory or spare hardware rather than a complete vehicle component group. Compatibility covers a range of touring car and off-road cars, making the set useful for workshop drawers, rebuild projects and routine running maintenance. When wheel hardware has been removed repeatedly or no longer matches the rest of the chassis, this 8-piece set provides a straightforward replacement option with a locking function built into each nut.
Screws & ball head screws
4mm Flange Lock Nut Blue, RC accessory, 5-pack
300053159€13.79
These 4 mm flanged lock nuts bring a functional hardware upgrade to compatible RC vehicle setups, combining blue anodized aluminum with a compact fastening format that trims weight and sharpens the look of exposed wheel hardware. The metallic finish stands out clearly against darker rims, suspension parts and chassis details, giving maintenance work and final setup a more technical appearance. Each nut uses a hexagonal body with a threaded center hole and a wide integrated flange. That flange increases the contact area at the mounting point, which helps distribute pressure more evenly across the wheel surface than a narrow nut alone. The lock-nut format is suited to repeated fitting and removal during tuning, cleaning and routine parts changes. With 5 matching pieces in the pack, one extra nut remains available after a standard 4-wheel installation, which is useful to keep with trackside spares or workshop hardware. The small size and clear 4 mm specification make this set easy to match with compatible wheel axles and hubs in RC maintenance or customisation work. Whether replacing worn hardware, refining the finish of a competition-inspired build or keeping a spare ready between running sessions, these aluminum nuts add a precise mechanical detail where it is seen most.
Screws & ball head screws
4mm Shift Ball Connector M3, model spare part
319804831€4.29
This 4 mm Shift Ball Connector with M3 thread is a dedicated spare part for Truck and HiLift model applications. The stated size and thread specification provide a direct reference for replacing the same connector type in an existing assembly, where the correct fit of small linkage hardware matters to the overall mechanism. Its role is focused and practical: restoring a worn, missing, or damaged connection point with the specified 4 mm ball format and M3 threading. Because the product data identifies Truck and HiLift compatibility, the connector is suited to those model ranges rather than to general, undefined use. That makes it a useful workshop part for routine maintenance, repair work, and keeping compatible builds equipped with the correct hardware standard. The compact format also stores easily alongside other model service parts, so the required connector type is ready when a rebuild or replacement is due. In a repair session, this spare part can be selected by its exact connector size and thread rather than by guesswork. For ongoing model upkeep, it supports a tidy stock of application-specific hardware for Truck and HiLift assemblies. Warning! Not suitable for children under 14 years.
Screws & ball head screws
4x10mm Step Screw, spare screw set for M-Chassis
300050585€4.39
This spare screw set provides 5 matching 4x10 mm step screws for compatible model chassis work, with a compact format that suits replacement, maintenance and rebuild tasks. The stepped design combines a threaded section, a cylindrical shoulder and a domed head, so one fastener can secure a part while also maintaining the spacing that a plain screw may not provide. The data names TA02, TA03 and M-Chassis compatibility, giving a direct reference for parts matching during service work. In a workshop tray or spares box, the 4x10 mm size is easy to identify when a build calls for the same specification. The 5-piece quantity supports targeted replacement rather than forcing a full hardware change across a chassis. The metal construction fits the role of a small mechanical fastening part where repeated fitting and removal are part of normal model upkeep. This screw pack suits bench repairs, scheduled maintenance and the final stages of a rebuild when the correct shoulder screw is needed to complete a mounting point. It also works as a useful reserve for keeping compatible TA02, TA03 or M-Chassis models ready for the next running session.
Screws & ball head screws
5.8x5mm Hex Ball Connector, model spare part
319803488€7.49
The TRF421/X 5.8x5mm Hex Ball Connector is a dedicated model spare part for precise repair and maintenance work. Its specified 5.8 x 5 mm size gives a clear reference when an existing connector needs to be matched, helping keep a compatible assembly consistent at the fastening point where the part is used. With 2 connectors in the pack, this replacement set covers a paired hardware change without shifting into a mixed assortment of unrelated small parts. The hex ball connector format points to a compact mechanical role inside a model assembly, where correct dimensions matter for fit and connection. Because the data identifies this as a supplies and accessories part rather than a complete model, the focus stays on exact replacement and upkeep rather than on a full build. Batteries are not included. This kind of spare part fits naturally into routine bench maintenance, whether a worn connector is being exchanged during servicing or a damaged piece is being replaced to return a compatible model assembly to working order. The compact format also makes it practical to keep a matching pair on hand for planned repairs. Warning! Not suitable for children under 14 years.
Screws & ball head screws
5mm Adjuster Short, RC spare part set, 8 pieces
300054489€2.89
This spare part set brings 8 short 5 mm adjusters into the suspension area of an R/C car, where low-friction material helps linked joints move with a smoother action. Each piece is shaped for use at connection points that need a pivoting link, making it a practical choice for maintenance, worn-part replacement or a fresh chassis build that calls for matching hardware. The short format suits tighter installation points than a longer adjuster and keeps the linkage layout compact around the joint. In use, the circular eyelet opening forms the attachment point for the connected rod or pin, while the low-friction composition focuses on reducing drag at the moving interface. That can help suspension parts articulate more freely as the chassis loads and unloads through direction changes, uneven surfaces and repeated laps. The set contains 8 identical adjusters, which supports consistent fit across several matching positions on a compatible R/C car. On a workbench, these adjusters fit naturally into routine rebuilds, suspension refreshes and setup corrections where several joints need the same part at once. During running sessions, smoother linkage movement can support cleaner suspension response as the car transitions through braking, turn-in and acceleration.
Screws & ball head screws
5mm Adjuster, model accessory, 19mm length
300050596€3.49
This model accessory set supplies 6 ball pans sized at 5 mm diameter and 19 mm length for compatible maintenance and replacement work. The specified dimensions make the set easy to match against an existing assembly, especially when a worn or missing fitting needs the same connection size and overall length. The pack is intended for use with 50592, which gives a direct compatibility reference instead of leaving the fit to estimation. Ball pans sit at the connection point of linked parts, so the stated 5 mm diameter matters when selecting the correct hardware for a rebuild or service task. The quantity of 6 supports repeated replacement work across the same assembly and leaves matching spares available for later upkeep. On the workbench, this set fits neatly into routine model maintenance, whether a compatible build is being refreshed after use or a stored chassis is being brought back into running condition. The compact hardware format also makes it practical to keep alongside other small fittings for planned repairs and parts organisation. Warning! Not suitable for children under 14 years.
Screws & ball head screws
5mm Ball Connector Nut, model accessory, 4pcs
309804206€5.49
The 5mm Ball Connector Nut set supplies 4 matching threaded fittings for model assembly, repair and maintenance work. Each piece combines an internal screw thread with a hexagonal base, giving small mechanical connections a defined contact point for tightening and adjustment during a build. The compact black metal parts are shaped for clean integration into technical assemblies where consistent hardware matters. Their uniform form keeps all 4 fittings visually and mechanically aligned across the same application, which helps when replacing worn connector nuts or preparing matching hardware for a fresh setup. The 5 mm sizing gives a clear reference for compatibility within the intended assembly, while the threaded interior supports a direct fit onto the corresponding shaft or screw. On the workbench, these fittings suit routine servicing, parts replacement and detail-focused model projects that call for precise small hardware rather than mixed spare nuts. The 4-piece pack also leaves matching components ready for follow-up maintenance when the same connection point appears more than once in an assembly. Warning! Not suitable for children under 14 years.
Screws & ball head screws
5mm Ball Head M3, model accessory, 10-piece set
300050592€6.79
This 10-piece set of 5 mm Ball Head M3 parts adds a precise connection component to model maintenance, repair and assembly work. Each ball head uses an M3 threaded shaft and a 5 mm ball, a combination that suits compatible linkage and mounting points where a compact pivoting connection is needed. The metal construction and hex shoulder shown on each part support secure tightening during installation. The pack includes 10 matching ball heads, which helps keep spare hardware on hand for repeated service jobs or fresh builds that call for the same fitting throughout. The spherical head shape is suited to moving connection points that need controlled articulation rather than a fixed joint. The short threaded section keeps the mounting format specific and easy to match against existing compatible parts. The gold-coloured finish shown in the set also makes each piece easy to identify in a parts tray or workshop drawer. On a repair bench, these fittings suit the replacement of worn connection points on compatible models. During a new build, the matching 10-piece quantity supports consistent hardware selection across multiple mounting positions and leaves reserve parts available for later maintenance. Warning! Not suitable for children under 14 years.
Screws & ball head screws
5mm/M3 Ball Socket Set, model accessory, 8 pieces
300050875€5.99
This 5 mm/M3 ball socket set brings a straightforward replacement option for compatible model linkages, with 8 matching parts ready for maintenance, repair work or a fresh build. The rod-end style shape and circular socket opening suit connection points that rely on a compact joint with controlled movement. Each piece is formed as a small connector end with a faceted outer body, a cylindrical shaft and a socket head that pairs with the stated 5 mm/M3 specification. That combination helps when an existing setup needs the same dimension rather than a close substitute. The pack format keeps several identical parts on hand at once, which is useful when multiple joints on one chassis use the same fitting or when spare hardware belongs in a regular bench stock. The black finish keeps the set visually consistent with many technical assemblies without drawing attention away from the surrounding components. In workshop use, the set fits naturally into routine servicing after wear at steering or suspension connection points. It also suits rebuilds where matching linkage ends across several rods help keep the assembly consistent and easy to sort during installation. Warning! Not suitable for children under 14 years.
Screws & ball head screws
5x9mm Ball Connector, model accessory, 5 pcs.
309805611€7.89
These 5x9 mm ball connectors add a compact mechanical link point to RC and model assemblies where a threaded joint and a smooth pivot surface need to work together. Each piece combines a 5 mm ball, an M3 threaded shaft and a 9 mm length, creating a clear fit for linkage tasks that depend on accurate spacing and dependable attachment. The polished metal finish and defined ball shape suit moving connections such as steering rods, suspension joints or other articulated model hardware, while the hexagonal shoulder provides a practical grip area during fitting. With 5 matching connectors in the pack, the set supports fresh builds, maintenance work and the replacement of worn fastening points. The small format also makes these parts useful for keeping workshop drawers or field boxes stocked with commonly needed RC hardware. In a chassis rebuild, the connectors can be fitted where rods or jointed parts need a threaded anchor and a pivoting contact point. On the bench, the uniform dimensions help keep left and right linkage positions consistent when several matching connection points are required in the same assembly. Warning! Not suitable for children under 14 years.
Screws & ball head screws
DB-01 3mm Thin Alum. Lock Nut, RC accessory
300054155€9.79
The DB-01 3mm Thin Alum. Lock Nut set adds a compact aluminum fastening option to compatible RC chassis, with 5 blue anodized lock nuts included in the pack. The 3 mm format suits platforms that use this hardware size, and the thin profile helps when surrounding parts leave little room for a taller nut. This set is intended for a broad list of chassis named in the data, including DB01, DB02, DN-01, F104PRO II, F104Ver.II PRO, F104W, F104, M-08 CONCEPT, TA07 MS, TA06 MS, TA06, TA06 PRO, TB-Evo.7, TC-01, TRF503, TRF502X, TRF420X, TRF420, TRF419XR, TRF419X, TRF419, TRF211XM, TRF201XMW, TRF201, TRF103, TRF102, TRF101, XV-02PRO, XV-01 Chassis, XV-01 PRO and XV-01T. Aluminum construction reduces weight compared with standard metal hardware, while the lock-nut form is made for fastening duties on running chassis. For workshop maintenance, rebuilds or detail-focused upgrades, the 5-piece set provides matching hardware for multiple mounting points on one chassis. The blue anodized finish also gives exposed fastening points a more technical appearance on race-oriented and off-road builds. Warning! Not suitable for children under 14 years.
Screws & ball head screws
DB-01 5x5mm Al.Ball Connector, model accessory
300054209€18.79
The DB-01 5x5mm Al.Ball Connector set adds a precise moving joint to compatible model assemblies, combining lightweight aluminum construction with a fluorine coating for smooth, lasting action at the linkage point. Each connector uses a spherical head, narrow neck and threaded shaft layout that suits pivoting connections where clean movement and repeatable fit matter. A fixed 4 mm distance from the seat bottom to the cushion ball gives this hardware a defined geometry for suspension setup changes, opening a wider adjustment range than a standard unspecified fit. The hexagon head supports firm tool engagement during installation, which helps when tightening small hardware into a chassis or suspension mount. The set contains 5 matching connectors, making it suitable for replacing worn parts or keeping identical hardware across several connection points. The metallic finish and compact 5x5 mm format suit detailed maintenance work where small differences in fit can affect movement. On a workbench, these connectors suit rebuilds, tuning sessions and routine parts replacement on a DB-01 based setup. They also fit neatly into a spares box for trackside servicing when linkage hardware needs a quick swap to restore smooth articulation. Warning! Not suitable for children under 14 years.
Screws & ball head screws
DB-01 5x5mm Ball Connector, RC chassis part
300053906€18.29
The DB-01 5 x 5 mm aluminium ball connector adds a compact adjustment point to compatible R/C chassis and supports more precise upper arm positioning where setup changes matter. Its blue anodised finish and hex head format give the small hardware piece a clean technical look while keeping installation focused on a defined mounting point. This version reduces the length from the bearing surface to the ball joint from 5 mm to 4 mm, increasing the available adjustment range on competition-capable chassis. The connector is manufactured from high strength aluminium and uses a threaded shaft with a rounded ball head for linkage attachment. A hexagonal hole accepts a 2 mm wrench for controlled tightening, and the instruction sheet notes that spacers can be used if needed to adjust position further. Compatibility covers a broad list of platforms including DB02, F104Ver.II PRO, FF-04 EVO, M-07 CONCEPT, M-08 CONCEPT, TA07 PRO, TA08 PRO, TB-04, TB-05 PRO, TC-01, TRF419, TRF420, TT-02 TYPE-S and XV-02PRO. In workshop use, this hardware suits rebuilds, replacement of worn mounting points and setup revisions across touring, formula and rally chassis in the supported range. The pack contains 5 ball heads, allowing several connection points to be updated in one session. Warning! Not suitable for children under 14 years.
Screws & ball head screws
DB-01 5x5mm Steel Hex Head Ball Connector Set
300053968€14.99
The DB-01 5x5 mm Steel Hex Head Ball Connector set adds a precise metal connection point to RC chassis assemblies where compact hardware and clean fit matter. With 5 matching parts in the pack, it suits repair work, routine maintenance and fresh builds that need consistent ball-end mounting points in a small format. Each connector uses a threaded screw shaft below a flange and rounded ball top, a layout commonly used where a linkage, rod end or ball cup needs to pivot around a fixed point. The 5x5 mm dimensions support installation in tight spaces, while the hex head format helps with controlled fitting during assembly or replacement. High-strength steel gives these connectors the material basis for demanding off-road use, and the same parts can also be installed in on-road chassis. In workshop use, this set supports quick replacement of worn connection hardware on compatible RC models and keeps matching spare parts ready for setup changes. The pack contains 5 ball heads. With compatibility stated as any chassis, the set can serve as a useful stock hardware option across different model car platforms and parts boxes. Warning! Not suitable for children under 14 years.
Screws & ball head screws
DB-01 5x8 mm Ball Connector, RC chassis part
300053907€18.29
The DB-01 5x8 mm Al.Ball Connector set brings a compact aluminium tuning part into suspension setup work on compatible RC chassis. Each connector uses a blue anodized finish and a 5x8 mm format, creating a clean fit for linkage points where precise geometry changes matter during maintenance and track preparation. A key detail lies in the revised distance from the seat bottom to the cushion ball, reduced from 5 mm to 4 mm. That change broadens the available suspension adjustment range and opens finer setup steps than a standard layout allows. The hexagonal hole type supports secure tightening, so each connector can be installed with firm tool engagement rather than relying on a plain slot or rounded head. The set contains 5 ball heads, giving enough hardware for targeted replacement work or coordinated changes across multiple mounting points. Compatibility is stated for the TA05, TRF415MSX and TB Evolution IV chassis, making the set a focused choice for workshop stock, rebuilds and setup revisions on those platforms. During routine servicing, the compact dimensions and defined fit help keep suspension links moving through their intended range while supporting repeatable adjustment work. Warning! Not suitable for children under 14 years.
Screws & ball head screws
DB-01 Ball Head Connector, RC spare part, 5x8 mm
300053969€14.99
The DB-01 5x8 mm Ball Head Connector set adds a compact steel mounting point wherever an RC chassis needs a snap-on linkage connection. Each of the 5 connectors combines a spherical ball head, a short neck and a threaded shaft, creating a clean interface for articulated parts that need controlled movement during running and setup work. The 5x8 mm dimensions make this hardware easy to match to existing assemblies when worn connectors need replacement or a fresh build calls for uniform fittings across several mounting positions. High-strength steel gives these parts the material basis for demanding off-road racing use, where repeated movement and chassis loads act directly on small connection points. The same connector format can also be installed on on-road chassis, so one pack covers more than a single vehicle type. Scope of delivery: 5 ball heads. In workshop use, the set suits routine maintenance, rebuilds after heavy track sessions, or stocking spare hardware for race-day repairs. The compact size also makes it practical for builders who want matching connector geometry across steering links, suspension links or other articulated mounting points that use this format. Warning! Not suitable for children under 14 years.
Screws & ball head screws
DB-01 Dust Cover Ball Head Adjuster Set 20pc
300053980€5.39
The DB-01 Dust Cover Ball Head&Adjuster(20) is a general use option part made to protect the connection joints between ball connectors and adjusters in the suspension system. By covering these exposed joint areas, it helps maintain smooth suspension operation during repeated use and supports more consistent movement where the linkage needs to articulate freely. This set contains 20 dust covers and is intended for chassis maintenance, replacement work and fresh builds that use ball connector and adjuster linkages. The part focuses on the joint itself rather than the whole suspension assembly, adding protection exactly where dirt and wear can affect the connection. Its general use design makes it suitable across a broad range of compatible model chassis rather than limiting fit to a single platform. In workshop use, the covers can be fitted during routine servicing when suspension links are checked, cleaned or renewed. They also make sense as spare stock for rebuilds, tuning sessions or keeping several chassis ready for running with protected linkage points. Compatible with any chassis. Warning! Not suitable for children under 14 years.
Screws & ball head screws
DT-03 3x46mm Screw Pin, model spare part
319805976€3.19
The DT-03 3x46mm Screw Pin set supplies 4 matching replacement fasteners for compatible DT-03 model assemblies. Each pin measures 3 x 46 mm, giving a clearly defined format for maintenance work where the original hardware needs to be renewed with the same dimensions. The screw pin layout combines a long shaft with a threaded fastening function, supporting clean installation at the intended mounting point. The set format keeps all 4 pieces consistent, which helps when replacing multiple matching parts in one service session. The metal build adds the firm, precise shape needed for hardware that sits within moving chassis areas and must hold its position once installed. For workshop organisation, the pack also makes sense as a ready reserve for future wear-related replacement. On a bench setup, these pins fit naturally into routine repair jobs, partial rebuilds or the refresh of a frequently used DT-03 chassis. They also suit planned maintenance before the next running session, when matching hardware dimensions can save time and keep a build mechanically consistent.
Screws & ball head screws
DT-03 5mm Ball Connector, Servo Saver Part
319804154€4.39
The DT-03 5 mm Ball Connector M2 for the servo saver is a small RC spare part built around a clear mechanical job: creating the pivot point where a linkage can snap or seat onto a rounded ball head and move through the steering action. Its compact shape combines a smooth 5 mm ball, a narrow collar and an M2 threaded post for screw-in installation in the matching assembly. This format suits DT-03 setups that use a servo saver connection with this size and thread specification. The spherical head gives the linkage a consistent contact point, while the threaded shaft anchors the part in place inside the steering hardware. As a replacement component, it helps restore the original connection geometry when an existing ball connector is worn, damaged or missing. The black finish and metal build match the technical look of RC running gear and fit neatly into confined spaces around steering parts. On the bench, this connector belongs in routine maintenance, rebuilds and parts replacement for compatible DT-03 assemblies. It is especially useful when refreshing steering response after wear at a frequently moving joint, or when completing a repair with the correct 5 mm and M2 specification rather than a near match.
Screws & ball head screws
Kugelpfanne kurz 5mm M3, model accessory, 8-pack
300050797€3.39
Kugelpfanne kurz 5mm M3 L14mm is a model accessory set for compact linkage connections in compatible RC and scale builds. The set contains 8 identical ball sockets, each sized at 5 mm with an M3 thread and a length of 14 mm, giving a consistent format for repairs, maintenance work or fresh assembly tasks. The short layout suits installations where surrounding components leave little room for longer connectors. Used on compatible rods or linkages, the M3 thread supports a defined attachment point, while the ball socket form is designed for joints that need controlled articulation around a mounted ball end. Matching dimensions across all 8 pieces help keep geometry even when several connection points are updated at the same time. The black finish keeps the parts visually discreet within many chassis and linkage layouts. In workshop use, the set fits neatly into routine service jobs such as replacing worn rod ends or preparing spare hardware before a rebuild. During assembly of compatible steering or suspension linkages, the 5 mm socket size and 14 mm overall length provide clear reference dimensions when selecting the right connector for the available space. Warning! Not suitable for children under 14 years.
Screws & ball head screws
M 4 x 11,5mm Step Screw/King Pin, RC spare part
300084175€2.19
This spare-parts set supplies 5 M 4 x 11,5 mm step screws/king pins for selected R/C machines, with a stepped metal form that combines a smooth shoulder section and a threaded end. That layout suits fastening points where parts need both guided location and secure fixing, making the set useful for routine maintenance, worn-part replacement or keeping matching hardware on hand for workshop stock. Each screw uses a slotted dome head, giving a clear contact point for fitting and removal with the appropriate tool. The 11,5 mm length and M4 format identify the hardware precisely, which helps when replacing like for like instead of mixing different screw types in one assembly. As a king pin or step screw, this part is intended for positions where the shoulder section matters as much as the thread, rather than acting as a standard fully threaded fastener. The set is listed as compatible with selected R/C machines including Fiat 500, Team Repsol Mitsubishi Ralliart Racing LANCER, Baja King, DualHunter and Plasma Edge. It fits naturally into repair sessions, rebuilds after heavy running, or parts sorting in a model workshop where exact hardware size matters. Warning! Not suitable for children under 14 years.
Screws & ball head screws
OF 5mm Adjusters L, RC accessory, open face
300054869€5.59
OF 5mm Adjusters L is an RC accessory set for linkage tuning and replacement work on compatible models. The pack contains 8 open face reinforced adjusters, each with a 15 mm length, for use in place of standard 5 mm adjusters when a longer rod-end style connection is needed on a mechanical linkage. The instruction diagram shows the adjusters fitted to a threaded rod with grease applied to the threads before assembly. Installation also has a defined orientation: the side marked with a circle symbol is pressed onto the ball connector. That detail matters on steering and suspension style linkages, where the joint needs to seat correctly on the ball stud for clean movement. Different lengths are available separately, which helps keep the setup matched to the geometry required by the model. This set suits maintenance, replacement and setup changes on RC assemblies that use 5 mm adjusters. During fitting, some models may require filing down, depending on the surrounding layout and available clearance at the linkage point.
Screws & ball head screws
OF 5mm Adjusters M, RC accessory, open face
300054868€5.59
The OF 5mm Adjusters M open face set adds a focused tuning and maintenance part for RC linkages, with 8 reinforced adjusters sized for use in place of standard 5 mm adjusters. The 11.5 mm medium length gives a concrete reference when matching an existing setup or planning a replacement during chassis work. The fitting method is clearly defined by the part design. Grease is applied to the threads before the linkage ends are screwed on, and the side marked with a circle is the side that presses onto the ball connector during installation. That orientation detail matters when assembling steering or suspension linkages, because the adjuster is designed to seat in a specific direction rather than as a symmetrical push-on part. The open face construction also supports direct use in rod-end style ball-joint connections where a standard 5 mm adjuster is being swapped out. On the bench, this 8-piece pack suits repair jobs, replacement of worn linkage ends, or small setup changes across compatible RC models. Some models may require filing down during fitting, so the part can be adapted where surrounding components leave limited clearance.
Screws & ball head screws
Router Ctrsk Bit for 2mm Screw, tool accessory
300074130€7.19
The Router Ctrsk Bit for 2mm Screw is a workshop accessory for cutting neat countersunk holes in small machine parts. Its diamond particle coated conical head removes material cleanly in carbon fiber, FRP and similar surfaces, so 2 mm countersunk screws can sit flush instead of leaving the head raised above the part. Beyond countersinking, the flat sides of the head can be used to shape edges during detail work. The #200 particle size gives the abrasive surface a defined cutting character for controlled material removal on compact components. This makes the bit useful when refining Mini 4WD parts that need a cleaner screw seat or a tidier edge profile. Made for use with routers such as the Tamiya Electric Handy Router Item 74042, it supports focused modification work where accuracy matters on every pass. On a tuning bench, the bit helps prepare carbon fiber and FRP parts for a lower-profile screw fit that keeps surfaces cleaner around mounting points. It also suits small finishing jobs where edge shaping and countersinking are handled with the same accessory in a compact tool setup. Warning! Not suitable for children under 14 years.
Screws & ball head screws
Screw Bag D BD1-7, model hardware set
319465797€10.89
Screw Bag D BD1-7 is a model hardware set built around the small fastening parts that keep an assembly moving. The pack brings together metal screws, hex nuts, flat washers, split lock washers and threaded spacers, giving compatible model builds the exact kind of joining and spacing parts that are often needed during maintenance or part replacement. The combination of different fastener types supports more than one task within a build. Screws and nuts handle fixed connections, washers sit between parts to spread contact, and split lock washers help hold tightened joints in place. Threaded spacers add distance where mounted sections need clearance between components rather than direct contact. This makes the set useful not only when hardware has been lost, but also when an older build is being refreshed with matching replacement fittings. On the bench, the assortment suits repair sessions, rebuild work and careful parts sorting before assembly starts. The compact hardware format also makes it practical to keep alongside compatible model kits as a dedicated source for replacement fixings when a single missing fastener would otherwise stop progress.
Screws & ball head screws
Servo Step Screws, aluminum accessory set of 4
300054862€10.89
These aluminum servo step screws are made to improve the way a servo sits in its mounting points, combining a precise fit with a clean hardware layout. The set contains 4 screws, each shaped to suit holes between 4.5 mm and 5 mm, so the screw seats more securely in the opening instead of relying on extra spacing parts. The metallic finish and machined form give the hardware a crisp technical look that matches detailed model builds and electronics work. A stepped profile is the key feature here. By filling the mounting hole more accurately, the screw helps reduce play at the fixing point and supports a tighter connection around the servo case. The integrated shoulder also means separate washers are not required, which keeps the installation simpler and leaves fewer loose parts to track during routine servicing. Hex socket heads add another practical detail, allowing a tool to seat firmly in the screw head for controlled tightening in compact spaces. These screws suit upgrade work, replacement hardware needs, or a fresh servo installation where a closer fit is wanted at the mounting holes. Depending on the servo design, only 2 screws may be needed, leaving the remaining hardware available as spares for later maintenance or another compatible setup.
Screws & ball head screws
Step Screw 3x14mm BB1, model spare screws
319808289€2.19
Step Screw 3x14mm BB1 is a model spare screw set for builds and repairs that call for this exact hardware format. The pack contains 10 screws, giving a ready supply for maintenance tasks where matching dimensions matter and mixed fasteners can interrupt progress. The 3x14 mm specification provides the key reference for selecting the right screw for a compatible assembly, while the BB1 designation adds a second identification point for parts matching. This combination helps when replacing missing hardware, sorting workshop stock or keeping a current project aligned with its intended screw type. As a dedicated spare part, the set supports precise fastening work in model assemblies that rely on consistent screw sizing. On the bench, the 10-piece pack suits routine servicing, partial rebuilds and keeping reserve hardware available between sessions. It also fits neatly into parts storage for quick access when a compatible model needs the same screw again. Warning! Not suitable for children under 14 years.
Screws & ball head screws
TRF M4 Serrated Wheel Nuts, RC accessory, blue
300042143€8.49
These TRF M4 serrated wheel nuts add a focused hardware upgrade to an R/C setup, combining blue anodized aluminum with a serrated contact face that is designed to improve wheel grip at the mounting point. The result is a firmer wheel attachment that suits faster running and repeated laps where hardware security matters. The 4 mm M4 specification gives a clear reference for compatible wheel hardware, and the set of 4 pieces covers a full vehicle. The serration works through direct contact at the wheel mount rather than through added bulk, so the change stays compact while addressing a critical fastening point. The aluminum construction keeps the hardware light, and the blue anodized finish makes the nuts easy to identify during bench work, wheel changes and routine checks between runs. On a home workbench, in a pit area or before a club session, this set fits naturally into regular maintenance stock. It suits replacing worn wheel hardware, refreshing a build with matching fasteners, or preparing an R/C chassis for more demanding track use where consistent wheel retention is a priority.
Screws & ball head screws
TRF421/X 3x2.6mm Hex Step Screw, model spare set
319803498€9.79
The TRF421/X 3x2.6mm Hex Step Screw set is a dedicated spare set for model maintenance, built around an exact fastening format rather than a generic replacement. With 4 matching screws in 3x2.6 mm, it supports repair work where the specified size needs to be retained for the original assembly layout. The hex step screw form matters in use because it combines the fastening function with a defined shoulder profile, making it suitable for connection points that depend on this exact geometry. Keeping the stated 3x2.6 mm size avoids guesswork during servicing and helps maintain consistency across repeated repairs. The 4-piece count also makes the set practical for replacing worn or missing hardware while keeping identical spares on hand for later workshop jobs. On the bench, this set fits the kind of maintenance routine where small hardware needs to match the original specification closely. It suits model builders who sort parts by size and type, and it gives existing assemblies a straightforward way to be refitted with the correct screw format after disassembly or wear. Warning! Not suitable for children under 14 years.
Screws & ball head screws
TRF421/x 5x6x4mm Hex Ball Nut, model spare part
319803492€6.79
The TRF421/x 5x6x4mm Hex Ball Nut is a dedicated model spare part for maintenance, repair and parts replacement in compatible assemblies. Its specified 5 x 6 x 4 mm format gives builders a concrete reference when matching existing hardware, helping avoid guesswork during service work. This set contains 2 hex ball nuts, making it suitable for replacing a matched pair where even hardware matters across the same mechanism. The hex form supports tool engagement during installation, while the ball nut design suits applications that call for this exact component style rather than a general-purpose nut. Kept in a workshop drawer, spares case or rebuild tray, the set adds a clearly identified fastening part that can be selected by size and type. During routine upkeep, rebuilds or targeted repairs, a correctly specified spare like this helps restore a compatible model assembly with the same stated dimensions. The compact format also makes it practical to keep on hand alongside other service hardware for race-day checks, bench work or scheduled replacement of small mechanical parts. Warning! Not suitable for children under 14 years.
Screws & ball head screws
TRF421/X 5x7x5mm Hex Ball Nut, model spare part
319803487€6.49
The TRF421/X 5x7x5mm Hex Ball Nut set supplies 5 matching spare parts for detailed model maintenance where exact hardware size matters. Each nut measures 5 x 7 x 5 mm, giving a clear specification for replacing worn fastening points in compatible assemblies and keeping mechanical connections consistent during service work. The hex form allows tool-based fitting and removal, which is useful when access is tight and adjustments need to stay controlled around small moving parts. As a dedicated spare part set, these nuts suit routine workshop tasks such as replacing lost hardware, refreshing used link points, or keeping matching replacements on hand for future repairs. The pack count of 5 supports repeated maintenance without mixing unmatched pieces from different sources. On the bench, this set fits neatly into organised model servicing, whether a current build needs a direct replacement or an existing chassis is being checked over after running sessions. The compact dimensions make it easier to match the required hardware before installation and help keep compatible mechanisms assembled with the intended fit. Warning! Not suitable for children under 14 years.
Screws & ball head screws
TRF421X 3x6mm Hex Flat Screw, model spare part
319803568€11.89
The TRF421X 3x6mm Hex Flat Screw is a dedicated spare part for model maintenance, repair and exact replacement work. Its stated 3x6 mm specification gives a clear reference for matching an existing fastener in a compatible assembly, which helps keep servicing focused and avoids the guesswork of mixed hardware. The hex drive format is designed for use with a matching hex tool, allowing controlled tightening during bench work. A flat head profile sits flush at the intended fixing point, which supports a tidy fit where this screw type is required. The pack contains 5 screws, useful for replacing missing hardware, refreshing worn fixings or keeping a few matching parts ready in a workshop drawer. As a model accessory rather than a general household fastener, it belongs in planned upkeep of compatible hobby builds. This spare part fits naturally into regular maintenance sessions, whether a model is being checked after running, rebuilt section by section or restored with matching hardware kept close at hand. The compact pack size also works well for parts storage alongside other workshop essentials used for ongoing model care.
Screws & ball head screws
TT-02/B 3x18mm Step Screw Set, chassis hardware
300054550€6.29
The TT-02/B 3x18mm Low Fric. Step Screw set is a focused chassis upgrade for the steering arm area on the TT-02 and TT-02B platform. Each 3x18mm screw uses a low-friction finish that helps the steering linkage move with less drag at the pivot, supporting a cleaner and more exact response when the front end changes direction. The set contains 2 step screws and an included hex wrench for installation. These screws replace the standard parts used in TT-02 chassis steering arms, while the hex heads match the format used on other option parts in the range. The stepped construction combines a smooth shaft section with a threaded end, so the screw can locate the moving joint correctly while still fastening securely in place. For TT-02 owners, 2 screws are enough to complete a single chassis in this position. TT-02B owners should note that 4 screws are required for the corresponding setup. On a bench build, maintenance session or steering refresh, small hardware changes like this can make the front assembly feel more exact at the point where the linkage pivots. Compatible with TT-02 and TT-02B chassis, this set suits targeted replacement work as well as option-part tuning.
Screws & ball head screws
3x10mm Tapping Screw, model hardware pack
300050577soon available again
This hardware pack supplies 10 matching 3x10 mm tapping screws for model assembly, maintenance and parts replacement. The slotted pan-head format and threaded metal shaft give each fastener a clear mechanical role when compatible components need to be fixed in place with the correct size and thread style. The set is focused on workshop practicality rather than broad accessory claims. Each screw is shown as the same silver metal fastener, making the pack useful for replacing missing original hardware, refreshing worn fixings or keeping a consistent spare supply close to a build area. The 3x10 mm specification is the key detail here, because screw diameter and length determine fit across mounting points, brackets and compatible model sections. A 10-piece count also supports repeated use across more than one repair session instead of leaving a single replacement on hand. On the bench, this pack fits naturally into parts drawers, organiser boxes and tool trays where small hardware needs to stay sorted by size. It also works as a straightforward replenishment option for ongoing model servicing when matching screws are needed for routine rebuild or reassembly work. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x22mm Screw Pin, model spare part, 4 pcs.
309805755soon available again
This spare-parts set provides 4 matching 3 x 22 mm screw pins for compatible model assemblies, giving a direct way to replace fastening parts that are missing, worn or no longer holding as intended. The defined 22 mm length and 3 mm format help maintain the original connection points in builds that rely on this pin size. Each piece has a long cylindrical shaft, a rounded tip, a wide head and a ringed section below the head. That shape supports guided insertion and a seated hold in the matching mounting point, while the uniform dimensions across all 4 pieces keep the set consistent for repair work. The black finish gives the parts a neutral technical appearance that blends into many model layouts and spare-parts boxes. This 4-piece pack suits routine workshop upkeep, targeted repairs and the replacement of individual fastening points on compatible models. Kept alongside other maintenance parts, the pins are ready when a build needs a like-for-like fixing part in the 3 x 22 mm size. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x6mm HG Alu HH Screw, model screw set, blue
300042327soon available again
The 3x6mm HG Alu HH Screw set brings precise fastening to detailed model work, with a Hi-Grade manufacturing process that helps each screw thread into place straight and true. The aluminum construction keeps the format focused on lightweight hardware, while the anodized blue finish adds a crisp visual accent on exposed mounting points. Each screw has a hex socket drive and a short 6 mm length suited to compact assembly areas where clean seating and accurate alignment matter. The pack contains 5 matching screws, making it useful for replacing worn hardware, refreshing visible fasteners or keeping identical spares ready for workshop use. The blue finish stands out clearly against neutral chassis parts, which can help when sorting hardware during maintenance. These screws are particularly suited to use with aluminum bulkheads and carbon fiber plates often found on TRF chassis machines. They also fit hobby tasks where a small, accurately made fastener is needed for secure mounting and a consistent finished look across the build.
Screws & ball head screws
3x8mm HG Alu HH Screw, model screw set, blue
300042329soon available again
This set of 3x8 mm HG Alu HH Screws brings precise fastening to model building work where alignment matters. Each aluminum screw is made with a different manufacturing process than standard screws, so it threads into the hole straight and true. The anodized blue finish adds a clear visual match across the set and stands out neatly against surrounding chassis hardware. The pack contains 5 matching screws with hex socket heads and a countersunk profile. That head shape allows the screw to sit flush in a compatible recess, which helps keep adjoining parts evenly seated. The Hi-Grade specification is especially suited to aluminum bulkheads and carbon fiber plates often used in TRF chassis machines. In builds that combine these materials, a straighter screw path can help reduce skew during fastening and support a more exact fit between connected parts. These screws suit replacement work, hardware upgrades and fresh assembly on compatible model applications. On a workbench, the matched dimensions and finish make it easier to keep fixing points consistent across the same section of a chassis or plate layout.
Screws & ball head screws
4mm Ball Connector M2, model accessory, 5-piece
300050590soon available again
This 5-piece set of 4 mm Ball Connector M2 hardware adds a compact connection point to model mechanisms that rely on precise moving links. Each connector uses a polished spherical head above a short neck, hex section and threaded post, creating a clear interface for compatible snap-on or pivoting parts in tight installation spaces. The 4 mm head size and M2 thread make these connectors suited to small-scale mechanical layouts where clean movement and accurate mounting matter. The metal construction gives each piece a defined shape for repeated fastening and removal during setup, adjustment or replacement work. The hex base supports tool-assisted tightening, while the threaded post seats into matching mounting points for a secure mechanical hold. With 5 identical connectors in the pack, the set can equip several linkage positions in one assembly or replace worn hardware across existing running gear. On the workbench, these connectors fit naturally into repair, tuning and fresh build tasks where steering links, control rods or other articulated parts need a ball-end mounting point. The consistent dimensions across all 5 pieces help keep left and right connection points matched when a model uses mirrored hardware. Warning! Not suitable for children under 14 years.
Screws & ball head screws
5.8 BCNuts for TRF Dampers, spare parts set
300042344soon available again
These 5.8 BCNuts for TRF Dampers are steel spare parts made for precise damper maintenance, with slick metal plating that supports super smooth motion where the connector nut meets the assembly. In a suspension rebuild or a targeted refresh, that combination of steel construction and plated finish keeps the hardware focused on clean mechanical action. The set contains 8 ball connector nuts and is specified for use as spares for parts in Item 54878 Upgrade Set for TRF Super Short Big Bore Dampers. The 5.8 mm format gives a concrete match point when replacing worn damper hardware. As a dedicated maintenance part rather than a general accessory, the set suits workshop stock, scheduled servicing and selective replacement after repeated running sessions. The plated surface is the key working detail here, because it is stated to deliver smoother motion at the moving connection. On the bench, these nuts fit naturally into damper overhauls, suspension tuning sessions and parts-box replenishment for TRF-based builds. Keeping 8 matching spares on hand helps maintain consistent hardware across multiple service intervals and supports clean, focused rebuild work. Warning! Not suitable for children under 14 years.