RC attachment parts
Pimp your ride with the RC attachment parts from Tamiya: from rear spoilers and bumpers to many other details for a customised look!
RC attachment parts
Pimp your ride with the RC attachment parts from Tamiya: from rear spoilers and bumpers to many other details for a customised look!
More
Attachment parts
1:10 Porsche 911 GT3 R (992), RC assembly kit
300051756€8.99
This 1:10 RC assembly kit brings the Porsche 911 GT3 R (992) into a build centered on scale form and track-ready layout. The polycarbonate bodyshell measures about 479 mm long, 188 mm wide and 127 mm high, and it recreates the car's aerodynamic shape with separate polycarbonate rear wing and light cases for added depth across the finished shell. Black molded parts depict the side mirrors and wing stays, adding crisp contrast against the painted body. The TT-02 chassis uses a shaft-driven 4WD layout, and its widely used design gives the build a clear mechanical structure with room to explore setup changes over time. A short 251 mm wheelbase defines the stance, while black 10-spoke wheels and slick tires complete the touring car look. Item 51226 Urethane Bumper L is included to support body protection during running. ESC and a Type 540 Torque-Tuned motor are part of the kit, and stickers plus masking stickers help with livery work and paint lines. On a workbench, the separate body parts and finishing materials turn painting into a focused stage of the build. Once assembled, the chassis layout, wheel package and detailed shell suit practice runs, shelf display, and repeat sessions spent refining setup and finish. Radio gear, a battery pack, a charger and paints are required separately. Warning! Not suitable for children under 14 years.
Attachment parts
1:10 Racing Wing Alpha, RC body accessory
300054729€12.49
This 1:10 Racing Wing Alpha adds a focused touring car finish with a stepped wing element and a pre-printed carbon fiber pattern on the polycarbonate surface. Mounted at the rear of a compatible body shell, it changes both the styling line and the down force effect in a way that suits race-oriented body setups. The set contains 1 Racing Wing A, 1 J Parts set for the wing stays, plus snap pins and O-rings for attachment. Installation requires a body shell with space to make attachment holes, and the fitting guide specifies a flat mounting area of 70 x 12 mm with 4 mm holes. The wing angle can be changed by reversing the direction of part J1, which alters the mounting position and gives a straightforward adjustment point during setup. The wing part arrives with the carbon pattern already printed, so the surface detail is built into the part itself rather than added later. On a touring car shell, the rear wing sits as a visible finishing element above the back deck and supports a more competition-led look. It suits body customisation, replacement builds and race-day setup changes where shell fit, wing angle and rear styling all need to work together. Warning! Not suitable for children under 14 years.
Attachment parts
1:10 Racing Wing Set 3, RC body accessory
300022015€18.39
Racing Wing Set 3 brings a competition-style rear aero update to 1:10 R/C touring car bodies that already have attachment holes for optional wings. The set combines 2 wing designs with 2 end-plate styles, creating multiple visual and setup options while keeping the fit focused on touring car shells in this scale. The wing parts come with a pre-printed carbon pattern, which gives the surface a technical finish before any extra detailing begins. One set of J parts serves as the wing stays, and the included snap pins, O-rings and screws handle attachment duties for the assembled rear wing section. The larger end-plates are not fixed to a single format: a marked cutline allows them to be adjusted between large and medium size. That added trimming option helps tailor the outline more closely to the body shape being used. Mounted on a touring car shell, the wing changes the rear profile with a clear racing look that suits track-focused builds, display bodies and refresh projects alike. It also works well when an existing shell already has wing holes and needs a replacement assembly with more than one styling route in the same pack.
Attachment parts
1:10 Rallye-Cockpit-Set Left-Hand-Drive, cockpit set
300054491€24.79
The 1:10 Rallye-Cockpit-Set Left-Hand-Drive adds a defined interior layer to compatible Tamiya rally car body sets, bringing a visible cockpit and helmet into the cabin area for a more convincing scale look. As an updated version of Item 50463, this set is designed for builders who want to move beyond an empty shell and give a rally body more presence when viewed through the windows. The set contents focus on interior conversion rather than bodywork replacement. A vacuum-formed cockpit section creates the main cabin structure, while the separate helmet piece adds a driver detail that suits left-hand-drive rally layouts. The newly included urethane sponge broadens compatibility by accommodating a wide range of chassis widths, which helps when matching the interior to different 1:10 rally platforms. Newly designed stickers provide instrument and trim graphics that can sharpen the dashboard area once applied. Plastic model paints are required separately for custom finishing. This cockpit set suits rally body projects where the shell remains the visual centrepiece but the cabin still matters at close range. It works well for fresh builds, body refreshes and reworked display cars, especially when clear windows leave the interior easy to see during shelf display or trackside preparation.
Attachment parts
1:10 Touring Car Cockpit Set Left-Hand, RC accessory
300054298€23.79
This 1:10 Touring Car Cockpit Set Left-Hand brings a more lifelike cabin view to 190 mm touring car bodies, turning a clear shell into a model with visible interior depth, driver detail and dashboard presence. The vacuum-formed cockpit insert sits inside the body shell and gives left-hand-drive touring car builds a more realistic look when viewed through the windows. The set is designed as a customizable interior insert rather than a fixed one-shape part. The cockpit can be trimmed to match different body shells, and holes can be opened to suit body mount posts and antenna tube positions. Included parts support extra detailing, with a driver helmet that can be assembled in 2 versions, with visor or without visor, plus dashboard and helmet stickers for instrument and trim graphics. Velcro tape is used to attach the insert inside the shell, while 5 urethane spacers help fill wider gaps between the body and cockpit. Two tapping screws are included for assembly. Plastic cement and paints are required separately. On the bench, the set suits careful fitting, painting and finishing work for touring car shells that need a more complete interior view. Once installed, the cockpit adds visible structure behind the windscreen and side windows, making display runs, shelf presentation and scale photography look more convincing. Warning! Not suitable for children under 14 years.
Attachment parts
1:14 Mirror/Steps 56375, scale model parts
319115577€24.99
This 1:14 Mirror/Steps 56375 parts set adds exterior detail to a scale vehicle build with chrome-finish components arranged on a single sprue. Mirror pieces, step sections and trim elements give the bodywork sharper definition, while the reflective surface helps these fittings stand out against painted cab and chassis sections. The frame shown for this set carries multiple accessory shapes, including narrow side-step style parts, perforated plates, curved guard pieces, bracket forms and a larger box-like panel with molded circular detail. That mix supports restoration work on an older build as well as fresh detailing during a new assembly. Because the parts arrive unassembled on the runner, placement follows the needs of the specific model section being completed or refreshed. The metallic finish also suits display builds where smaller exterior fittings need the same visual presence as the main body panels. On the bench, this set fits naturally into body detailing, replacement work and finishing stages where mirrors or steps define the look of a working vehicle. In a display setting, the added fittings help a 1:14 truck or utility-style model read with more depth from side and front viewing angles. Warning! Not suitable for children under 14 years.
Attachment parts
1:14 Y Parts Fenders 56375, model spare parts
319225246€19.79
This 1:14 Y Parts Fenders 56375 set supplies moulded body components for scale model assembly, centring on curved fender sections and related support pieces that shape the outer wheel-area bodywork. The black parts arrive attached to sprues, which keeps the individual sections organised for identification, trimming and fitting during the build or repair process. Alongside the main fender pieces, the set shows rectangular panels with circular mounting holes, a larger frame-style section and smaller connector-like parts, giving the builder the specific body elements needed for this spare-parts group. The moulded format suits precise cleanup before installation and helps maintain consistent part geometry across matching left and right sections where the design requires it. As a replacement set, it is useful when an existing build needs fresh outer panels after wear, damage or a missing section. The 1:14 scale makes it relevant for large-format truck modelling where body proportions and wheel coverage need to stay true to the original layout. On the workbench, the sprue arrangement makes it easier to sort the different shapes before cutting them free and test-fitting them to the model. In a restoration or continuation build, these fender parts help return the bodywork to a complete, coherent look with the correct shaped sections in place. Warning! Not suitable for children under 14 years.
Attachment parts
Adjustable Wing Stay Set, RC body accessory
300054773€45.79
This aluminum wing stay set adds a wider range of rear wing adjustment to touring car body setups, with angle positions in 8° increments from 8° to 32°. The layout supports clear, repeatable changes when the rear wing needs a lower or steeper mounting angle for a different body configuration. The stay design also moves the wing farther back than the previous aluminum wing mount, with 10 mm or 20 mm rearward positioning depending on the attachment holes used. The set contains 2 wing stay mounts and 2 adjustable parts, and the document image shows matching hardware such as screws, washers, spacers and O-rings for installation. It is intended for touring car bodies with enough room to create attachment holes, so the shell itself determines the final fit. Wing parts are sold separately. Compatible wing sets named in the data include 54729 RC Racing Wing Carbon Pattern, 54688 RC Racing Wing Set 2 Carbon Pattern, 54494 RC Racing Wing Set 2, 54458 RC Racing Wing B, 54457 RC Racing Wing A, 53604 RC Racing Wing Set and 53470 RC Lightweight Wing Carbon. On a prepared touring car shell, the adjustable stays support fine rear aero positioning for track-focused body tuning.
Attachment parts
Alfa Romeo Giulia H Parts, model car trim sprue
309005512€14.49
This H parts sprue for an Alfa Romeo Giulia model concentrates on the brightwork and small fittings that define the car's character. The chrome-plated runner presents front-end trim pieces in a clean layout, including the grille section, round headlight components, side mirrors and a steering wheel, so the build gains the crisp visual accents associated with a classic Italian saloon. Each component remains attached to the molded frame until the chosen stage of assembly, which keeps the smaller parts grouped and easier to sort during the build. The reflective plated finish gives exterior details a distinct contrast against painted body panels, while the steering wheel adds a matching focal point inside the cabin. Because the sprue gathers several visible trim elements on one runner, it supports a more coherent look across the front fascia and interior touchpoints. On the workbench, this parts set suits careful trimming, test fitting and finishing alongside the main body sections of the model. Once installed, the grille, lamps and mirrors help the Alfa Romeo Giulia shape read clearly from front and side angles, while the steering wheel completes the dashboard area with a period-style detail. Warning! Not suitable for children under 14 years.
Attachment parts
BBX Driver Figure Z Parts, model accessory set
319225151€6.29
BBX Driver Figure Z Parts add molded detail components to a figure-focused model build, with white unassembled pieces arranged on a sprue for clean removal, preparation and fitting. The set brings a distinct ornamental look through a rectangular panel with a sculpted bird motif, creating a strong visual accent when worked into a compatible BBX layout. Alongside the main panel, the sprue carries 2 rounded cap-like parts with central holes, 1 small rectangular piece with a hole, 1 circular ring piece and 1 curved half-ring piece. One rounded component features an embossed face-like detail, introducing another shaped surface that can change the finished look of the assembly. The visible connection points indicate a peg-and-hole joining method, so placement and orientation can be checked before final fixing. The molded format also keeps the individual sections grouped together until the build reaches the fitting stage. On the workbench, these parts suit builders refining a driver figure area or adding themed trim to a BBX project. The separate components support careful cutting, dry fitting and positioning, making the set a focused choice for detail work within a larger model assembly. Warning! Not suitable for children under 14 years.
Attachment parts
Blackfoot 3 G-Parts Glasses Smoke Spare Set
319005372€8.89
The Blackfoot 3 G-Parts Glasses Smoke spare set supplies the tinted glazing needed to refresh the body appearance of an existing Blackfoot 3 build. Transparent brown injection-molded pieces on a single sprue provide the shaped window sections shown for this replacement set, giving the body its smoked screen look again once fitted. The formed parts include a large curved windshield section and an additional wide curved panel, along with molded attachment points that stay connected to the frame until removal. That layout helps keep the clear pieces together during storage and preparation, instead of leaving loose glazing parts to pick through one by one. The transparent material keeps the window areas visually open, while the smoke tint changes the overall body character compared with fully clear glazing. As a model spare, this set is aimed at repair, restoration or parts replacement rather than a complete vehicle build. It suits workshop use when an original screen has been scratched, lost or damaged, and it also fits rebuild projects where an older body needs fresh glazing to complete the shell again. For shelf display, the tinted panels restore the darker window finish that helps the Blackfoot 3 body look complete and consistent. Warning! Not suitable for children under 14 years.
Attachment parts
Body and Driver Figure Parts Set for 58618 Model
319115431€8.99
This parts set brings the body shell and driver figure elements for the 58618 Mt.Bee. build together on one red moulded sprue, giving the model its distinctive outer form and a seated cockpit character. The unassembled frame groups the major pieces clearly, so each section can be identified before cutting, fitting and final placement on the vehicle. The visible moulded components include a rounded shell with wheel openings, a separate rectangular panel, additional flat cover sections, a torso with arms in a driving pose, a driver head, a helmet shell, a steering wheel, 2 pedal-shaped parts and several small connectors. That mix supports both the visual identity of the model and the interior driving position rather than covering only one area of the build. The driver parts are supplied as separate pieces, which allows the figure and helmet to be assembled in sequence before installation. The steering wheel and smaller fittings add the control details that complete the cockpit scene. On the bench, the sprue layout helps keep the body and figure parts together during preparation for the 58618 Mt.Bee. model. Once assembled, the shell panels and driver components work together to give the vehicle a finished appearance with a clear seated driving setup. Warning! Not suitable for children under 14 years.
Attachment parts
Body/Rear Wing Mount, model spare parts set
319005328€7.39
This spare parts set provides molded E parts for body and rear wing mounting, centered on the P956/C11 designation shown in the product data. The black runner holds multiple matching components together, including side frame panels, bracket forms, rod-like elements, ring-shaped parts and a narrow oval plate with 3 holes, all arranged as one coordinated replacement set. The two larger side pieces show triangular cutout bracing and 3 circular openings each, giving this set a clearly defined structural layout for mounting work. A central circular ring-like part connects to angled supports, while smaller connector elements and a block-style bracket add further attachment points within the same sprue. Because the parts remain molded on the runner, each shape is easy to identify before separation and assembly. The molded markings TAMIYA and JAPAN are visible on the sprue in the image. This set suits repair, restoration or parts replacement on a compatible model where the original body or rear wing mount needs renewal. It also helps keep an existing build consistent when matching left and right structural pieces are required in the same section. Batteries are not included. Warning! Not suitable for children under 14 years.
Attachment parts
Bruiser 4x4 Driver Figure, model accessory
300054416€10.19
The Bruiser 4x4 Driver Figure is a model accessory created to bring a more convincing cockpit scene to the 2012 release of the Toyota Bruiser RN36. Built as a seated driver, the figure is shaped for placement inside the cabin, where the driving position gives the vehicle interior a more complete scale appearance. The set contains 10 parts for assembling 1 figure and focuses on the details that define a driver at the wheel. Separate arms, a torso with legs in a seated pose, and a steering wheel are included as individual components, allowing the build to follow the layout of a driving scene rather than a standing display figure. The parts also include 2 head options and a separate helmet shell, which adds flexibility to the final look while staying within the off-road vehicle theme shown by the Bruiser name. As an accessory rather than a full vehicle kit, this set concentrates on one specific area of the model: the cabin and its visible occupant. Placed behind the wheel, the assembled figure changes how the interior reads through the windows and open cabin area. It suits builders refining a Bruiser restoration, a shelf display, or a finished truck prepared for closer scale detailing. Warning! Not suitable for children under 14 years.
Attachment parts
Buggy Driver Figure Set, model accessory parts
300054626€5.19
The Buggy Driver Figure Set adds a helmeted cockpit figure and matching headlight details to buggy models, bringing a stronger sense of scale to off-road builds. The seated driver shape gives the cockpit area a clear focal point, while the extra front-end parts help the body shell read more like a complete machine on the bench or on display. The set includes figure parts with helmet, headlight parts, screws and washers for assembly. Instructions show 3 x 10 mm, 3 x 12 mm and 3 x 8 mm tapping screws used across the mounting steps, plus 2 washers. The driver can be fixed to the chassis or to the body, depending on the model, which gives added flexibility when working with different buggy layouts. If body mounting is used and no opening is present, a 3 mm hole may need to be made. Double-sided tape is sold separately for chassis mounting. Paint can be applied to the figure and headlights to match the chosen buggy style, from race-inspired color schemes to weathered off-road finishes. Once fitted, the seated driver and front lights sharpen the character of a buggy shell, whether the model is being prepared for a shelf, a photo setup or a detailed restoration project.
Attachment parts
C-Parts bumper chrome, model spare parts for 58347
309005229€15.49
This C-Parts bumper chrome set is a model spare parts sprue for 58347, supplied as chrome-plated components for exterior replacement or restoration work. The metallic finish gives bumper and trim areas the bright plated look shown on the original design, while the sprue format keeps each piece arranged and easy to identify before removal. The set shows a mix of shaped detail parts, including long pipe sections, grille-style forms, narrow rod-like pieces, conical elements, a ring connector and several small cylindrical connectors. Molded part numbers are visible beside multiple pieces, supporting careful matching during assembly and helping separate similar shapes when a rebuild calls for exact placement. The chrome-plated surface highlights contours and edges clearly, which is useful when preparing visible body details that need a uniform finish. At the workbench, this sprue suits repair jobs, incomplete builds or refresh projects where original brightwork needs to be replaced with matching parts. It also supports stock-correct restoration of model 58347 when exterior details such as bumper sections or plated accents are no longer complete. Warning! Not suitable for children under 14 years.
Attachment parts
CC-01 E-Parts Front Bumper, model spare parts
300005523€20.99
The CC-01 E-Parts Front Bumper set provides the molded front-end sections needed when a compatible model needs fresh exterior hardware. Attached to a single runner frame, the parts can be removed, cleaned up and prepared for installation as part of a careful repair or replacement job. Visible components include a tubular bumper assembly, a silver-gray grille piece, brackets, posts, connector sections and small round caps or spacers. The injection-molded layout keeps these matching pieces together in one set, which helps when restoring the front area with the correct shapes and attachment points. Multiple screw holes and molded openings are built into the larger mounting sections, supporting accurate positioning during assembly. The unused sprue format also makes it easy to identify each section before cutting and fitting begins. This spare-parts set suits bench work focused on maintenance, rebuilds or replacing damaged front trim on a CC-01 vehicle. It can be used when refreshing a shelf model after wear or when returning a regularly driven chassis to a tidier front-end appearance with the proper molded components.
Attachment parts
D-Parts Bumper Chrome, model parts for 56301/56304
300005470€33.99
D-Parts Bumper Chrome is a chrome-plated parts set for 56301 and 56304, intended for model builds that need matching exterior sections with a bright metallic finish. The molded pieces come attached to a sprue, so each section remains clearly arranged before removal and fitting during assembly. The set contains several differently shaped components visible in the parts frame, including curved cylindrical pieces, elongated side sections, narrow covers and bracket-style elements. A diamond-plate textured panel adds another distinct detail for areas where a tread-pattern surface suits the vehicle layout. The reflective chrome plating gives these parts a uniform appearance across the visible exterior sections. Because the parts are supplied for 56301 and 56304, the fit and visual style stay aligned with those specific model references rather than a generic vehicle body. On the workbench, the sprue layout helps with checking each molded section before cutting, trimming and placement. During a restoration, replacement or fresh build, the plated finish supports a clean match across bumper and trim areas that stand out once the model is assembled.
Attachment parts
DF-03 Body with Wing, RC bodyshell set
300555108€30.49
The DF-03 Body with Wing is a replacement bodyshell set for chassis 58370, bringing back the sharp off-road buggy profile with one matched shell and rear wing. Formed as exterior parts rather than a complete vehicle, this set suits rebuilds after race wear, workshop damage or a fresh visual reset before the next run. The bodyshell covers the central chassis layout and defines the buggy's low, aerodynamic lines, while the separate wing completes the rear section with the same competition-focused shape used on the original model. As an unpainted set, it leaves room for custom liveries, replica graphics or a clean single-colour finish that fits an existing fleet. The shell format also makes it useful as a spare kept ready between running sessions, so a damaged exterior can be swapped without interrupting the setup of the chassis underneath. On the bench, the set supports restoration work on a DF-03 build that has seen repeated dirt-track use. It also fits display refreshes, repaint projects and second-shell preparation for different looks across club running, shelf presentation or event weekends. Warning! Not suitable for children under 14 years.
Attachment parts
Driver Figure A-Parts, model accessory for Sand Rover
310005141€13.79
This A-Parts driver figure set is a dedicated model accessory for the Sand Rover 58500, created for builders who need the specific cockpit figure section rather than a complete vehicle kit. The designation points directly to the matching application, which helps keep restoration, replacement and parts planning tied to the correct model. Used during repair work or a fresh build based on original spares, the figure section restores a key visual element in the driver area. The A-Parts format identifies this as one defined sprue group, which is useful when sorting components on the bench or checking compatibility against an existing Sand Rover 58500. Because the data names the driver figure specifically, the set suits projects where the cockpit appearance needs the correct matching part instead of a generic substitute. On a workshop table, in a spare-parts drawer or beside an in-progress Sand Rover chassis, this accessory fits naturally into careful model maintenance. It supports clean replacement work when an original figure section is missing, damaged or set aside for repainting. Warning! Not suitable for children under 14 years.
Attachment parts
DT-02 Holiday Buggy A-Parts Roof, spare part
319005086€13.99
The DT-02 Holiday Buggy A-parts roof is a dedicated spare part for kit 58470 and serves as the matching roof section for this specific model. Its model-linked designation helps keep repairs aligned with the original parts layout, which matters when a body shell needs a clean replacement rather than an improvised fit. Within the DT-02 Holiday Buggy parts structure, the A-parts reference identifies where this section belongs in the overall body assembly. That makes it useful for maintenance benches, rebuild projects and planned body restoration after wear from transport, storage or regular running. The focused fit also helps avoid mixing unrelated components across similar buggy ranges when a precise replacement is needed. This spare part suits repair work that aims to return the model to its intended appearance and parts configuration. It also fits hobby setups that keep key replacement sections on hand for ongoing upkeep of kit 58470 between running sessions, rebuilds and body refresh work.
Attachment parts
DT-04 F Parts Frame, chassis parts set
300051757€16.99
The DT-04 F Parts Frame provides a focused replacement set for the new DT-04 chassis, bringing together moulded structural sections used around the outer frame and body mounting areas. The frame format keeps each section connected on the sprue until needed, which helps when checking shapes and selecting the right piece for a repair or rebuild. Among the included parts are the roll cage, bumper, body mounts and wing mounts, along with further matching sections from the F-parts group. This makes the set useful when worn, damaged or missing chassis pieces need to be restored with parts intended for the same DT-04 platform. The grey moulded layout shown in the set gives a clear overview of each section before removal. Because the parts come as one coordinated frame, workshop organisation stays straightforward while individual pieces are trimmed and fitted where required. The set suits bench repairs, partial chassis refreshes and planned spare stocking for DT-04 running gear projects. It also supports rebuild work after heavy use, where mounting points and exposed frame sections often need direct replacement rather than improvised fixes. Warning! Not suitable for children under 14 years.
Attachment parts
EVOII Mirror Rear Wing Parts, model accessory
319004524€8.79
This accessory set supplies the H-/J-Parts for the EVOII, covering mirror and rear wing components in white for body finishing, replacement or restoration work. The defined part grouping keeps key exterior details together, helping the model retain the intended outline once fitted. The white moulding gives a neutral base that can be used as supplied where the colour match fits the build, or prepared further for a more specific finish. Because the set is limited to mirror and rear wing elements, it addresses a precise area of the body rather than spreading across unrelated sections. That makes it useful when a project needs the rear aero detail renewed, a damaged mirror replaced, or an incomplete shell brought closer to its intended appearance. On a workshop table, these parts support careful rebuilds and body refresh tasks where small exterior elements make a visible difference. They also suit long-stored models that need the correct finishing pieces added back before display or running sessions. Warning! Not suitable for children under 14 years.
Attachment parts
F-Parts Roof w/spoiler, model parts for 56318
309005842€22.49
F-Parts Roof w/spoiler provides the roof and upper body section for 56318 as white molded components on sprues. The set centers on 2 exterior pieces: a larger rectangular roof panel with rounded corners and a matching curved section with spoiler-style shaping, giving restoration or replacement work the exact area needed for the body shell. The main roof piece carries recessed panel lines, several mounting holes and a central rectangular cutout that defines the opening in the upper surface. Those molded details matter during a rebuild because they guide alignment with the surrounding shell and preserve the intended body layout instead of forcing a generic substitute into place. The second piece adds the raised contour of the upper rear section, so the roofline keeps its original profile when an older shell is repaired or refreshed. The white finish also leaves the parts ready for the usual preparation steps before final assembly and paint. Used in a repair project, the set helps return a worn or damaged cab section to its intended shape. It also suits a clean rebuild where the roof area, cutout and spoiler contour need to match 56318 rather than being adapted from another shell. Warning! Not suitable for children under 14 years.
Attachment parts
F104 2017 Wing Set Black, RC spare wing set
300051604€22.79
The F104 2017 Wing Set Black is an RC spare wing set shaped for the original 2017 Formula One body design from Tamiya. Molded front and rear aero parts follow 2017 Formula One regulations and dimensions, giving an F104-based race car the correct visual profile after damage, wear or a rebuild. The package contains H Parts for the rear wing and J Parts for the front wing, both supplied as molded components that can be prepared to match an existing body finish. Alongside the main wing sections, the set also includes mounting hardware such as screws, nuts and clips shown in the contents image, so the replacement work can focus on the wing area rather than sourcing separate fasteners. Compatibility extends across F104 PRO, Pro II, TRF101, 102 and Pro Version II chassis cars, and the set also matches body parts set 51602. This spare set suits workshop use after track contact, curb strikes or general wear on exposed aero sections. It also supports restoration of an older Formula chassis where the original front or rear wing shape needs to be brought back to the 2017 specification look for display, maintenance or the next running session.
Attachment parts
Ford Escort Customs H Parts, model spare parts
319005564€9.99
H Parts Ford Escort Customs 58691 is a model spare parts set created for the Ford Escort Customs 58691 reference. The designation points to a dedicated replacement group rather than a general-purpose accessory, which makes it useful when a specific section of the original model needs to be restored with matching components. In workshop use, a model-specific spare parts set helps keep repair work aligned with the original build instead of relying on approximate substitutes. That matters when the shape, mounting points or visual detailing of a replacement part need to correspond to the base model. The H Parts designation also helps identify the correct section within a larger build or maintenance plan, which can simplify reordering and parts organisation when several assemblies are handled at once. This set fits naturally into repair benches, long-term model upkeep and careful restoration of an existing Ford Escort Customs 58691 build. It also works as a practical reserve for hobby storage, where keeping the correct replacement group on hand can shorten interruptions during maintenance.
Attachment parts
Golf II GTI J Parts, clear lightcase set
319115555€8.29
This J Parts lightcase set supplies clear molded components for the Golf II GTI and brings back the sharp lamp detailing that gives a scale car body its finished look. The transparent parts arrive on a sprue, making each section easy to identify before removal and fitting during a careful model build or restoration task. The set focuses on the light areas of the body and is suited to replacing worn, missing or damaged clear sections on a compatible Golf II GTI model. The molded runner shown in the set keeps the individual pieces organized until they are trimmed free, which supports precise preparation at the bench. Clear material is especially useful on lamp sections because it preserves the intended lens appearance instead of covering those areas with opaque parts. The compact parts layout also makes this set a practical addition to a spares box for ongoing maintenance of an existing build. On a restoration project, the fresh clear sections help return definition to the body shell once the main paint and trim work are complete. For a new compatible build, the set supports accurate finishing of the lighting details and gives the model a cleaner, more complete appearance when viewed up close.
Attachment parts
GR Supra H Parts, model accessory sprue
319007358€9.49
This H parts sprue for the GR Supra centers on exterior detail pieces that change the finished look of a model car with crisp, race-inspired body hardware. The black molded runner carries a large rear wing assembly, mirror parts and smaller mounting components, giving builders the exact shapes needed for restoration work, replacement or a fresh body finish. The rear wing is formed as a multi-part assembly with a wide main plane, separate endplates and support elements, so the completed section can add the distinct raised spoiler profile associated with tuned road cars and circuit styling. Keeping every piece attached to the sprue before trimming helps with part control during painting and test fitting, especially when several small components need to stay matched to one body project. The black material also provides a practical starting point for trim areas that remain dark after assembly. On the bench, this set supports body refreshes after wear, missing parts or custom repaint sessions where original exterior details need to be replaced. It also suits careful finishing work, where mirrors, supports and aero parts are prepared in sequence, then fitted to bring a GR Supra shell back to a complete and cohesive appearance.
Attachment parts
H Parts Bag, model spare parts for M-B CLK-GTR
319006833€14.99
This H Parts Bag is a model spare parts pack for the M-B CLK-GTR and is identified in the source data with reference 47437. It supports repair, replacement, or restoration work where the original H parts group is needed to keep a compatible build aligned with its intended specification. The designation H PARTS BAG(H)(FOR CARRY) : 58214 provides the clearest guide to the exact spare set. Rather than mixing general-purpose replacements into a detailed model, this pack gives builders the named parts grouping assigned to that application. That makes it useful when an existing build needs a like-for-like replacement during maintenance, rebuild work, or parts sorting at the bench. The pack format also helps keep the grouped components together while planning a repair. In practical use, this spare set fits best into workshop stock for ongoing model care, especially when a compatible M-B CLK-GTR build is already in service or being refreshed. It can also support rebuild projects where the original designated H parts need to be matched by name before installation. Warning! Not suitable for children under 14 years.
Attachment parts
H-Parts Chrome S.Clod Buster, model spare parts
300004894€17.29
H-Parts Chrome S.Clod Buster 58321/58423 supplies chrome-plated replacement parts for compatible S.Clod Buster model builds. The bright plated finish gives visible sections a metallic look that stands out on completed bodywork and helps restore the intended appearance on older builds. The parts come as a molded sprue, so each section stays organized before removal and fitting. This format helps during rebuilds, maintenance and careful parts selection, especially when only specific exterior sections need replacing. The set is intended as model spare parts rather than a full vehicle kit, making it a practical choice for ongoing workshop use, restoration projects or keeping a build consistent with its original detailing. The product image shows multiple shaped components, including trim-style sections, bracket forms and round lamp-style housings, all presented in chrome effect. On the bench, these parts fit naturally into repair sessions, detail upgrades or the refresh of a shelf model that has lost finish quality over time. They also suit hobby stock for builders who maintain compatible S.Clod Buster vehicles and want matching replacement pieces ready when exterior parts need attention.
Attachment parts
J-Parts Chrome Clod Buster Bumpers, model parts
309115021€14.49
J-Parts Chrome Clod Buster Bumpers are replacement model parts for the 58065 version and focus on one of the most visible exterior areas of the truck. The chrome finish restores the plated look associated with this designation, giving rebuilds and repairs a cleaner, more complete appearance once fitted. These parts are suited to maintenance work where original bumper pieces are worn, missing or ready for a visual refresh. Because the set is tied to the 58065 reference, it gives builders a concrete fitment point when matching parts to an existing chassis. The emphasis here is not on a generic trim piece but on a model-specific bumper set intended to preserve the established Clod Buster look. That makes it useful for careful refurbishment, partial repairs or a more faithful visual reset during a longer rebuild. On the bench, these bumpers fit naturally into restoration projects where exterior details matter as much as running condition. They also suit shelf-display rebuilds, replacement after damage, or keeping a 58065-based truck visually consistent with its original chrome-accented finish. Warning! Not suitable for children under 14 years.
Attachment parts
L-Parts L1-4 Window, model spare part set
319115269€10.99
L-Parts L1-4 Window is a model spare part set identified for reference 58452. The designation points to a defined window section, making it a practical choice when a matching replacement is needed during repair, restoration or careful parts sorting for an existing build. The L1-4 grouping helps distinguish this set from other body-related components and keeps the replacement focused on the correct section rather than a general mixed assortment. That clear designation is useful on the workbench when a build is being maintained over time, when damaged sections are being exchanged, or when original parts need to be refreshed with the correct matching piece set. The reference to 58452 ties the set to a specific model entry, which supports accurate part selection and reduces guesswork during maintenance. This spare part set fits naturally into workshop routines such as replacing worn body glazing sections, preparing parts before final body assembly, or organizing a restoration project around model-specific components. For collectors and builders maintaining an existing model, a clearly identified replacement set helps keep the work precise and orderly. Warning! Not suitable for children under 14 years.
Attachment parts
Lunch Box E Parts Spare Set for Model Kit
309005231€8.89
This E Parts spare set for the Lunch Box based on 58063 supplies the shaped transparent components used on the model, making it a practical choice when original fitted sections are missing, marked or due for replacement. The smoky-tinted finish and injection-moulded polystyrene construction give each piece the defined curves and clear contours needed for accurate placement on the body. The set is shown with 2 main moulded sections and smaller round clear details still attached to the sprue, so each part can be identified before removal and fitting. Visible locator points and formed mounting areas support precise positioning during assembly or restoration work, while the dedicated E Parts designation helps match the set to the correct build reference for 58063. The transparent pieces are shaped for model-specific use rather than generic trimming, which matters when replacing body glazing or other clear fitted elements. On a restoration project, the set can return a worn Lunch Box shell to a more complete appearance; on a repair, it provides the exact replacement category needed instead of adapting universal sheet material. It also serves as a useful stock part for long-term maintenance of an existing 58063 build. Warning! Not suitable for children under 14 years.
Attachment parts
M-Parts Bumper Chrome Parts Set for Model Car
309115169€23.29
M-Parts Bumper Chrome Parts for 58372 add bright exterior detailing to a compatible model vehicle build. The set is centered on chrome-colored trim pieces and bumper elements, giving the body shell a more defined front section and a sharper finished appearance once fitted. The included molded parts appear to cover several visible exterior zones, including front-end trim and side detailing elements. That makes the set useful when an older build needs replacement dress parts or when a fresh body finish calls for matching brightwork across multiple sections. Because these are styling and body-detail components rather than drivetrain parts, the visual change is immediate and easy to spot on the completed model. The separate pieces also support more precise placement during assembly and finishing work. On the bench, the set fits naturally into restoration, repair or customization projects for the 58372 platform. It can be used to replace missing trim, refresh worn-looking bright parts, or complete a body with the crisp contrast that chrome-colored accents bring to grilles, bumpers and side sections. Warning! Not suitable for children under 14 years.
Attachment parts
Mercedes-AMG GT3 EVO Spoiler Lightcase Set
311835807€15.39
This accessory set supplies polycarbonate spoiler and lightcase parts for the Mercedes-AMG GT3 EVO bodyshell, giving RC builders the shaped components needed to complete or refresh key exterior details. The parts follow the visual character of the GT3 race car, with the rear wing section and lamp housings defining areas that stand out strongly once the shell is finished. Used during a replacement, repair or body refresh, the set focuses on 2 exterior zones that often matter most to the final look: the rear aero element and the front and rear light surrounds. Polycarbonate keeps the parts aligned with common RC body material choices and supports a consistent fit and finish on the shell. This makes the set useful when an existing bodyshell has damaged trim parts or when a fresh body requires the correct shaped add-ons for the Mercedes-AMG GT3 EVO design. On the workbench, the parts suit careful body preparation, painting and final detailing of a race-inspired touring car shell. Once fitted, the spoiler and lightcase sections help the bodyshell present the sharper silhouette and lamp definition associated with the full-size Mercedes-AMG GT3 EVO. Warning! Not suitable for children under 14 years.
Attachment parts
Midnight Pumpkin E Parts, model spare parts
309005796€14.79
The E Parts set for Midnight Pumpkin 58365 is a dedicated spare parts pack for restoring or maintaining this specific model with matching replacement components. Chrome-finished molded pieces recreate the metallic exterior look shown on the original build, making the set useful when worn, damaged or missing parts need to be exchanged with the correct shapes. The sprue includes larger trim sections together with smaller mounting components, all formed as model spare parts rather than as a complete vehicle kit. The molded layout keeps the pieces attached until removal, which helps with identification during repair work and supports a controlled fitting process at the workbench. This set is intended for Midnight Pumpkin 58365, so the mounting geometry and part selection follow that model designation rather than serving as a universal assortment. On a shelf display model or an RC build that has seen regular running, replacement parts like these help return the original appearance without changing the character of the vehicle. For refurbishment projects, rebuilds or keeping a long-owned model in running order, the set adds the exact E sprue components needed for the next repair stage. Warning! Not suitable for children under 14 years.
Attachment parts
N-Parts mirror H58372, model spare part set
309115170€8.79
N-Parts mirror H58372 provides a dedicated spare part set for model building work where the correct exterior components matter. The set arrives as white injection-molded parts on a sprue, a format that keeps the pieces together before trimming, test fitting and final installation on the intended compatible build. The visible part group includes a large curved panel as well as 2 smaller rounded components, each linked to its own curved support piece. Mounting pegs and screw holes are molded into the larger section, giving the builder defined connection points instead of relying on improvised placement. That structure helps when replacing lost parts, correcting damage, or preparing a restoration with matching shapes from the original part family. The unpainted white finish also leaves the surface ready for the usual model preparation steps according to the needs of the build. On the workbench, this kind of spare sprue supports careful repair sessions, parts replacement, or completion of an older kit that needs the correct mirror-related components again. It also suits organized stock keeping for model workshops where specific replacement trees are kept ready for future maintenance. Warning! Not suitable for children under 14 years.
Attachment parts
P-Parts Blitzer Beetle 58122, model parts set
309115051€12.99
P-Parts Blitzer Beetle 58122 is a model parts set focused on the driver and cockpit area, bringing together the moulded sections that define the vehicle's interior character and front detail. The black sprue presents the components in one organised frame, ready for trimming, preparation and installation during a repair or rebuild. The visible moulding includes a seated driver torso with arms extended toward the steering position, 2 alternate helmeted head pieces, a separate helmet shell or back piece, 2 oval mirror parts, a steering wheel, rectangular panel sections and a larger body-related panel. This combination supports work on the cabin scene as well as selected exterior details that sit close to the windshield area. Because the parts are still fixed to the frame, each section stays easy to sort before cutting and test fitting. The moulded number markers on the sprue also help distinguish individual sections during the build process. This set suits bench work that focuses on replacing missing pieces, refreshing a previously used model or completing a period-correct Blitzer Beetle body layout. On a display build, the driver figure and cockpit parts give the finished vehicle a more complete look when viewed through the front section. Warning! Not suitable for children under 14 years.
Attachment parts
P-Parts P1-16 Figure Exhaust Model Parts Set
319115270€11.29
P-Parts P1-16 Figure Exhaust is a dedicated replacement parts set for 58452, intended for model repair, restoration or completion work where the original figure or exhaust section is missing. The sprue layout keeps the components grouped and clearly molded, which supports accurate identification during bench work and helps maintain the intended configuration of the build. The set is supplied as unassembled white styrene parts, a practical material for trimming, test fitting and surface preparation before paint. Visible molded numbering on the frame marks individual positions, which helps track each piece through the assembly sequence and reduces guesswork when matching parts to the target section. The combination of figure elements and exhaust-related pieces makes this set useful for replacing damaged sections or refreshing an older build with cleaner detail where wear has affected smaller components. On the workbench, the parts suit careful hobby tasks such as cleanup, dry fitting and finishing alongside an existing 58452 model. For collectors and builders maintaining a specific vehicle, a dedicated replacement set like this keeps repair work focused on the correct section and supports a neater final result than mixed spare parts. Warning! Not suitable for children under 14 years.
Attachment parts
Porsche 956 H Parts Mirror Wing Model Components
319007689€12.39
This H parts set for the Porsche 956 focuses on body details that shape the finished look of the model, with mirror and wing components supplied on a molded runner for clear identification and controlled preparation before assembly. The sprue format keeps the pieces grouped in one frame, so the layout can be checked at a glance before cutting, test fitting and final placement. The frame shown carries multiple molded parts in black and gray, with small index numbers beside the components and TAMIYA lettering molded into the runner. The visible shapes include curved cap-like pieces, bracket-style forms, hexagonal parts and lever-like elements with rounded ends, all presented unassembled on the sprue. This format helps separate delicate detail parts from loose storage and supports careful handling while trimming and fitting each piece to the build. Used during a replacement, restoration or ongoing assembly project, the set suits workbench sessions where missing or damaged exterior details need to be matched back to the Porsche 956 body. The organized runner layout also helps when checking part identity before paint or installation, especially on builds where small finishing components define the final silhouette. Warning! Not suitable for children under 14 years.
Attachment parts
Q Parts Blitzer Beetle model kit body parts
309115052€14.49
Q Parts Blitzer Beetle 58122 brings together key body and trim components for repair, restoration, or completion work on a matching model vehicle build. The set combines a large orange-red body shell section with smaller molded sprues and a separate chrome sprue, creating the visual foundation for the Beetle's rounded front end and bright exterior detailing. The chrome runner carries several reflective parts, including 2 large round lamp housings, 2 smaller circular pieces, a round emblem-style detail and angular mirror-style components with mounting stems. Alongside these, the orange-red runners add thinner bar-like and upright elements that suit mounted exterior details and body finishing. This mix of larger shell parts and smaller trim pieces supports careful replacement of worn sections or completion of an incomplete build while keeping the look of the Blitzer Beetle 58122 consistent across major visible areas. Laid out at the workbench, the parts set gives model builders a clear group of matching components for body restoration or visual refresh work. It also suits projects where original exterior pieces are missing, damaged, or need a cleaner finish before the model returns to shelf display or trackside use. Warning! Not suitable for children under 14 years.
Attachment parts
Q Parts Mirror Chrome Parts Set for Mt.Beetle
319115432€9.49
Q Parts Mirror for the 58618 Mt.Beetle is a model parts set focused on exterior detailing, with chrome-plated molded pieces supplied on a single sprue. The bright plated finish suits visible trim areas where a metallic look matters, and the grouped layout keeps the matching components together while the build or repair is underway. Alongside the chrome sections, the frame also carries dark-tinted transparent inserts, adding a second material and finish to the set. The molded layout shows several distinct part shapes, including round dome-like pieces, circular ring details and tapered components attached to rod-like sections. Numbered markers such as 2, 4, 5 and 6 are molded into the frame to distinguish the individual sections and support part identification during selection. This makes the set useful for replacing missing pieces, refreshing worn exterior details or completing a model with the correct visual elements for this version. On the workbench, the combined chrome and tinted parts help restore the small finishing touches that define the look of the Mt.Beetle. For maintenance, rebuilds or model-specific spares, the set keeps the required exterior detail pieces in one dedicated frame. Warning! Not suitable for children under 14 years.
Attachment parts
Racing Wing Set 2, RC car accessory, carbon pattern
300054688€19.99
The Racing Wing Set 2 adds a carbon pattern rear aero detail to RC car bodies and brings a more focused competition look to the tail section. Two wing designs are supplied, so the rear profile can be matched to the chosen body shape or running setup instead of relying on a single fixed form. Installation is intended for bodies with a flat mounting area measuring 70 mm x 12 mm. The fitting process uses 4 mm mounting holes, and Wing B can be trimmed where required by the marked cut line shown in the fitting guide. The support structure uses parts J1 and J2, with O-rings and snap pins holding the assembly in place under the body shell. Reversing the direction of J1 changes the wing angle, giving a direct way to alter the mounted position through the bracket layout itself. This accessory suits RC car builds that need a more defined rear deck finish or a different wing shape for body tuning. On a painted shell with race markings, the carbon pattern surface adds contrast at the back of the car, while the adjustable mount layout leaves room to test different wing positions during setup.
Attachment parts
Racing Wing Set, RC body accessory, polycarbonate
300053604€18.99
The Racing Wing Set adds adjustable rear aero detail to compatible touring and sports car body shells with 2 straight wing designs in 0.7 mm polycarbonate. One version uses a larger vertical element for high downforce, while the other uses a smaller vertical element for regular downforce, creating a clear choice between 2 rear wing characteristics on the same body. The set also uses ABS wing mounts that can be positioned in 2 ways to change the angle of the horizontal plane. Increasing that angle raises the downforce generated at the rear, which gives a concrete tuning option for circuits that demand more planted handling through faster sections. Scope of delivery: 1x Racing Wing Set with 19 pieces. The included J-Parts wing stay, snap pins and O-rings provide the mounting hardware for installation. Compatibility covers a wide range of chassis including TA05, TA07 PRO, TA08 PRO, TA06, FF-03, TB-05 PRO, TC-01, TRF420, TT-02, TT-02D, TT-02 TYPE-S, TT-02 TYPE-SR, TT-01 TYPE-E and TT-02RR. The wing shapes suit body shells with space available for wing attachment holes, whether the goal is a sharper competition look or a rear setup with more downforce on demanding tracks. Warning! Not suitable for children under 14 years.
Attachment parts
Rally Cockpit 58278, model accessory insert
301825096€9.29
This cockpit insert brings the Rally Cockpit 58278 interior back into view with a single moulded piece that combines 2 seated figures, control areas and cabin structure in one clearly defined layout. The white finish leaves the relief easy to read during test fitting, painting and detail work, while the paired seating arrangement gives the interior a recognisable competition-style character. Raised forms across the part create distinct zones for the seats, side sections and central controls, so the cabin does not rely on a flat floor or empty shell once installed. A large circular steering detail, block-like control elements and support bars are already worked into the moulding, which helps keep the interior consistent across restoration or replacement work. The one-piece format also simplifies alignment inside a compatible model because the main cabin details stay fixed in their intended positions relative to each other. Used in a rebuild, this insert helps return visual substance to a worn or incomplete interior. In a detail-focused project, the moulded surfaces provide a practical base for careful paint application, panel picking and figure finishing, especially when the cabin remains visible through windows or an open body section. Warning! Not suitable for children under 14 years.
Attachment parts
Rubber Bushing, body-fitting spare part, 2-piece
319805385€1.79
This 2-piece rubber bushing set is made for body-fitting parts and gives a direct replacement for a small but important mounting detail. The black rubber shape uses a central opening and a compact ring profile to sit at the fixing point, where a cushioned interface is needed between connected parts. Its simple form makes the function clear: the bushing is placed at the mounting area to support the fit of the body-fitting section while separating hard contact surfaces. That can be useful when an original insert is worn, missing or compressed through repeated use. The tapered inner opening and rounded outer edge shown in the part design suit applications where the fixing point needs a neat seated insert rather than a loose spacer. In regular model maintenance, small replacement parts like this help keep existing assemblies in working order without changing larger sections around them. The 2 matching bushings can be kept in a parts box for repair work or fitted during a refresh of mounting hardware on compatible body-fitting points.
Attachment parts
Scania 56379 Animal Guard, model parts sprue
319115596€35.29
The Scania 56379 Animal Guard parts sprue adds the distinctive protective-bar styling of the full-size truck to a scale model build through black injection-molded components shaped for this specific detail area. Rounded rectangular loops, narrow crosspieces and longer bar sections create the visual structure seen at the front of the vehicle, where these elements frame the bodywork and sharpen the finished look. The sprue format keeps every component connected to the runner until the build reaches this stage, so the individual sections stay grouped and easier to sort before cutting. Molded identification marks such as KK and B2 are present on the frame and help distinguish this parts tree from other sections in a larger build. The mix of curved surrounds, straight lengths and bracket-like pieces points to a detail set that is focused on trim and guard geometry rather than mechanical assemblies. This set suits replacement work on an existing build, completion of an unfinished kit or careful restoration of worn exterior details. On the workbench, the black finish gives a clear view of each contour while trimming, test fitting and aligning the guard structure with the surrounding body sections. Warning! Not suitable for children under 14 years.
Attachment parts
Scania 56379 F Parts, model kit spare parts
319007737€33.49
This spare-parts sprue for Scania 56379 focuses on F Parts, including the sun visor and side skirt sections named in the data. The white injection-moulded frame keeps the individual pieces organised until separation, making it easier to identify each section before trimming and placement on the build. The layout shown on the runner combines curved outer pieces, long narrow structural elements and box-shaped components with moulded openings, all formed as matching parts for this specific designation. That matters during repair work as much as during an interrupted build, because a dedicated parts tree avoids substituting shapes that do not belong to the same version. The moulded format also supports common model-making steps such as dry fitting, surface preparation and paint planning once the parts are removed from the sprue. On the bench, this set suits replacement work on a partly finished truck model or completion of a build that is missing its original F runner. It also gives collectors and builders a direct route to the named Scania 56379 exterior sections without opening a full new kit. Warning! Not suitable for children under 14 years.
Attachment parts
Scania 56379 H Parts, model spare parts set
319007739€19.89
Scania 56379 H Parts are model spare parts for repair, restoration and replacement work on the matching build. The set is supplied as a white molded sprue with multiple unassembled components attached to one frame, including bumper sections, wheel arch pieces and smaller support elements that can be prepared as needed for the relevant assembly stage. The parts frame shown in the data groups larger curved sections with longer side pieces and additional smaller elements, which helps keep related exterior components together before removal from the sprue. This format supports controlled preparation when replacing worn or missing sections on an existing model. The molded layout also makes it easier to compare shapes, mounting points and part positions while planning a repair step or completing an unfinished build. As spare parts rather than a full kit, these components focus on specific body-area replacement work. On the workbench, the set suits careful restoration of a Scania model with attention on the bumper and wheel arch area. It also fits projects where an existing build needs matching replacement pieces kept together on one molded frame until the required parts are selected and prepared. Warning! Not suitable for children under 14 years.
Attachment parts
Scania 56379, mesh animal guard, model parts
319115597€14.49
These mesh animal guard parts for Scania 56379 bring a purposeful commercial-truck look to a model build through multiple lattice-pattern panels on a single black sprue. The diamond mesh texture and the mix of rectangular and curved shapes give the builder several matching elements to place around the front and side areas of the bodywork. The set is presented as unassembled model parts, with each section attached to the runner frame for clean identification before clipping and fitting. Several panel sizes are visible, including broader guard sections and smaller matching pieces that extend the same visual theme across more than one mounting point. The black moulding provides a neutral base for finishing work and helps the mesh pattern stand out clearly during test fitting, painting and final placement. As an accessory set, the focus stays on exterior detail and scale appearance rather than mechanical changes. In a truck model project, these parts suit builders who want to sharpen the look of a Scania 56379 with protective grille styling and extra body detail. The mesh structure reads clearly at close range, making it useful for display builds where surface texture and added trim help define the finished vehicle. Warning! Not suitable for children under 14 years.
Attachment parts
Scania 56379, model parts set, Lightbox
310110009€27.49
This Lightbox parts set for Scania 56379 concentrates on one clearly defined component group and keeps the build focused on the exact section that needs replacement or completion. The grey injection-moulded frame presents the pieces unassembled on a single sprue, so each part stays organised and easy to identify before trimming and fitting. The visible layout includes 2 long rectangular panel pieces, 2 small circular connector-like parts carried on short bars, and 2 small rectangular plates with an oval slot and round holes. That combination makes this set useful when an existing Scania 56379 build needs the matching Lightbox section rather than a full new kit. As a model supplies entry, it suits repair work, restoration of an older build, or a planned parts swap using the exact designation named in the data. The moulded format also allows careful preparation of edges and attachment points before the pieces are installed. On the workbench, the grouped sprue layout helps keep the individual sections together during sorting and test fitting. In an ongoing truck model project, the set supports precise replacement of the relevant assembly area while leaving the rest of the build unchanged. Warning! Not suitable for children under 14 years.
Attachment parts
Scania Air Horn Parts, model accessory sprue
319007740€25.49
HH Parts Truck Air Horn Scania 56379 adds a distinct exterior detail set to a scale truck build with chrome-colored molded parts arranged on a single sprue. The frame layout keeps the individual components clearly separated, so the horn shapes and smaller fittings can be identified before removal and placement on the model. The sprue shows multiple part forms, including 2 cone-shaped horn pieces, small block elements, elongated rod-like parts and a cross-shaped connector piece. Number markings on the runner help distinguish positions on the frame during preparation. The chrome finish gives these parts a bright metallic look suited to visible trim areas on a truck model, where small add-on details change the overall appearance of the cab and roofline. As a dedicated accessory set rather than a full vehicle kit, it focuses on finishing detail and visual accuracy for a Scania-themed build. On the workbench, the compact sprue format keeps the parts together until the fitting stage and supports an orderly painting and assembly sequence where required by the build. Once installed, the air horn components create a more defined upper-body truck silhouette and add a clear custom-detail accent to display-focused model projects. Warning! Not suitable for children under 14 years.
Attachment parts
Scania Clear Lamp Bracket Parts, Model Kit Spares
319007741€10.19
These clear lamp bracket parts for Scania model builds focus on one of the details that gives a truck model its finished look. The set comes as transparent gray injection-molded pieces attached to a sprue, so each section stays organized until trimming and fitting begin at the workbench. The runner carries multiple small structural parts, including long narrow bars, perforated sections and connector elements that support careful replacement or completion of lamp bracket areas on a compatible build. Keeping the parts on the frame before use helps with part handling and visual checking during a repair or ongoing assembly. The transparent gray material is especially suited to light-related details, where clean edges and consistent molding matter once the parts are installed. This makes the set useful both for restoring a previously built truck and for finishing a model that needs the correct bracket components. On a Scania project with missing or damaged details, the set supports a neater rebuild of the lighting area without changing the character of the original model. It also fits naturally into a spare-parts drawer for future maintenance, touch-ups or planned detail work on compatible truck assemblies. Warning! Not suitable for children under 14 years.
Attachment parts
Scania Fender Antenna Parts, model accessory set
319225257€16.19
This Scania parts set focuses on exterior detailing with molded fender and antenna components arranged on a black sprue for clean identification before removal. The layout brings together larger curved sections, a long narrow bar-shaped piece and several smaller fittings that suit scale truck bodywork where wheel coverage, trim and mounted details shape the finished look. The sprue format keeps each piece connected until the build reaches the fitting stage, which helps when comparing mirrored parts and planning placement across the model. Two large curved sections appear alongside bracketed elements, cover-like housings, a rectangular plate and several compact connector-style parts, giving the set a broad mix of shapes for visible exterior areas. Because the parts arrive unassembled, builders can trim, prepare and position each section to match the needs of the project. The black finish also suits body and chassis areas where darker mounted details blend naturally into the overall truck appearance. This accessory set fits naturally into repair work, replacement tasks and detail-focused upgrades on a Scania model project. It can be used when refreshing worn exterior sections, completing a truck build that needs matching fender hardware, or adding antenna detail that sharpens the final presentation on shelf or trackside scenes. Warning! Not suitable for children under 14 years.
Attachment parts
Scania Fuel Tank Q Parts, model accessory set
319115599€29.49
This Q Parts set provides left and right fuel tank components for a Scania model build and adds the side-mounted equipment that gives a truck chassis its finished working look. The black molded sprue groups the main cylindrical tank sections, smaller round connection points and bracket-style pieces in one clearly arranged frame for preparation at the bench. Beyond the tank bodies themselves, the runner also shows matching support parts that help carry the visual structure of a heavy vehicle's side equipment. The cylindrical forms, end caps and mounting elements create a more complete silhouette along the lower sides of the model. Because the parts are supplied unassembled on the sprue, each section can be removed, cleaned and fitted as the build requires. This makes the set useful when replacing missing pieces, restoring a previous build or adding detail to a truck project that needs the Scania tank layout. On the work surface, the grouped arrangement helps keep small fittings together while the larger tank sections remain easy to identify. Once fitted to the model, the assembled parts strengthen the mechanical character of the vehicle with the distinct look of side tanks and attached hardware. Warning! Not suitable for children under 14 years.
Attachment parts
Scania Light Bar Mount, Model Parts Set
319115598€13.59
This model parts set is made for the light bar mount area of the Scania 56379 and brings focused detail to a specific section of a scale truck build. The black sprue frame holds multiple molded components in one organized layout, giving each piece a clear place before removal and assembly at the bench. Visible on the runner are long ribbed sections, curved mounting forms, linked cylindrical connectors, drilled bracket pieces and block-shaped support parts. Molded part numbers such as 10, 8, 4 and 2 are integrated into the frame, helping builders identify the correct components during each assembly step. The arrangement on the sprue supports careful preparation, since the parts remain grouped until they are cut free and cleaned for fitting. As a dedicated accessory set, the focus stays on the structure that supports the light bar rather than on a full vehicle assembly. On the work surface, these components suit builders refining a Scania truck model with more specific exterior hardware. The set also fits finishing sessions where accurate placement, clean alignment and consistent scale detail matter across the mounted light bar area. Warning! Not suitable for children under 14 years.
Attachment parts
Scania Marker Lights, model accessory parts
319007736€21.39
These DD Parts marker lights for Scania model builds add a focused exterior detail that sharpens the look of a compatible truck project. The set is supplied as separate black molded components on a sprue, giving builders clearly defined parts to remove, prepare and fit during the finishing stage of an assembly. The molded layout keeps the small light elements grouped in one frame before use, which helps when planning paint and placement across the bodywork. As a detail-oriented accessory set rather than a full structural conversion, these parts concentrate on visible trim areas that can change the character of a truck model with relatively little space required. The black finish provides a neutral base for further treatment where the build calls for painted or customized lighting details. This kind of parts set fits naturally into restoration work, replacement of missing pieces, or a visual refresh on an existing Scania model. It also suits builders who want to refine a display vehicle with extra exterior accents after the main chassis and body sections are complete. Batteries are not included. Warning! Not suitable for children under 14 years.
Attachment parts
Scania R470 H-Parts, model spare parts sprue
300004519€23.99
Scania R470 H-Parts bring the correct exterior sections back into a truck model build with a dedicated spare parts sprue for set 56318. The set centers on front bumper and side panel components, giving model work a direct route to replace worn, damaged or missing molded sections with matching shapes. The scope of supply contains 1 sprue with the H parts grouped together for organized handling at the workbench. The parts are injection molded in white and remain attached to the runners until removal, which helps keep each section identifiable during trimming and dry fitting. Recessed lines, mounting openings and the molded contours visible on the sprue support accurate placement within the intended assembly. As a spare parts set rather than a full kit, this pack focuses on the specific body areas named in the data. This format suits repair work, restoration of an earlier build, or completion of a model that needs the original bumper and side panel sections for a consistent finish. On the bench, the single sprue layout keeps the relevant pieces together while planning the next assembly steps and checking fit against the existing build. Warning! Not suitable for children under 14 years.
Attachment parts
Scania R620 H-Parts Bumper, model spare parts
300004893€26.99
This H-Parts bumper set for the Scania R620 focuses on replacement body sections that restore the front-end look and structural detailing of the truck model. The white molded components arrive attached to sprue frames, with visible panel lines, mounting holes and shaped openings that define each section before trimming and fitting begin. The set presents several distinct body elements rather than loose offcuts, which helps keep the parts organized during preparation. A large grille-style section, rectangular side panels and a curved main body piece create a clear basis for repair or rebuild work on an existing Scania R620 model. The molded cutouts and attachment points give each section a specific role in the assembly, which supports accurate placement during fitting. The white finish also provides a neutral base for surface preparation and later painting to match the rest of the build. On the workbench, this set suits modelers replacing damaged bumper parts, refreshing an older truck build or preparing a cleaner body shell for a new finish. It also fits projects where original sections are missing and the front bodywork needs matching shapes and mounting geometry to bring the model back into complete form.
Attachment parts
Scania Rear Fender Y Parts, model spare parts
319225258€18.49
These Y Parts Rear Fender Scania 56379 components support detailed repair and replacement work on a Scania model build. The set appears as a single white molded sprue with multiple unassembled pieces attached to runners, keeping the parts grouped and easy to identify before cutting and cleanup. Large curved panels, ribbed curved sections, flat mounting plates with round holes, a frame-like base section and smaller bracket-style pieces provide the substance needed for rear fender area work. The molded layout suits careful hobby bench preparation, where each section can be removed, trimmed and test fitted in sequence. The white finish gives a neutral base for surface preparation and later paint matching. Because the set centers on body and attachment parts rather than decorative extras, it fits practical restoration tasks as well as detail corrections on an existing build. The visible mix of curved covers and support-style elements helps maintain the intended shape around the rear fender section. On the workbench, these parts suit replacing worn sections, correcting damage or refreshing a build that needs cleaner exterior panels. They also support ongoing custom projects where matching fender pieces and mounting elements need to be kept together during assembly and finishing. Warning! Not suitable for children under 14 years.