Spare parts for old RC cars
Discover a wide range of spare parts for your Tamiya vintage models. Screws, wheel adapters and much more. Because even the oldest model deserves an upgrade every now and then!
Spare parts for old RC cars
Discover a wide range of spare parts for your Tamiya vintage models. Screws, wheel adapters and much more. Because even the oldest model deserves an upgrade every now and then!
More
Spare parts for old cars
Aluminum 4mm Lock Nut Set, model accessory, pink
319804624€7.19
This set of 4 aluminum lock nuts brings a precise fastening detail to model builds and maintenance work, while the pink anodized finish adds a bright visual accent at the wheel area. With a 4 mm size, the nuts suit compatible threaded axles where compact hardware needs to stay easy to handle during setup and part changes. The lock nut design is made for fastening tasks where vibration and repeated removal matter, making the set useful for routine servicing as well as colour-coordinated upgrades. Aluminum gives each nut a light metal construction that fits neatly into performance-focused builds without adding bulky hardware. The pink finish is more than a colour note on the parts tray: it helps distinguish this set quickly from standard silver or black fittings during bench work. Supplied as 4 matching pieces, the set covers one complete wheel mounting point on many model layouts. On the workbench, these nuts fit naturally into rebuilds, wheel swaps and detail updates where small hardware shapes the final look as much as the mechanical fit. They also suit spare-parts storage for regular running sessions, keeping a matching set ready when worn or misplaced fasteners need replacement.
Spare parts for old cars
Ball Bearing Set Hornet Grasshopper Chassis
300054997€17.19
This ball bearing set brings together 10 replacement bearings for a focused chassis service job across several classic Tamiya platforms. The pack contains 9 x 1150 ball bearings and 1 x 850 ball bearing, matching the sizes stated for the supported models and giving a clear route to replacing worn rotating parts with the correct mix. The set is intended for Hornet, Grasshopper, Grasshopper II, Super Storm Dragon, CW-01 chassis models such as Lunch Box, plus Mad Bull, Mad Fighter and Rising Fighter. Ball bearings sit at rotating points where shafts and axles need controlled movement, so the correct size matters as much as the quantity. The metal construction and ring design suit maintenance work on running gear and transmission areas where smooth rotation is needed. As a dedicated bearing pack rather than a mixed hardware assortment, it keeps the service task focused on the exact bearing types named in the data. It suits routine rebuilds, repairs after extended running, or planned upgrades on compatible chassis already on the bench. Kept in a workshop drawer or parts case, the 10-piece mix gives a ready reference for several well-known buggy and CW-01 based models when replacement bearings are due.
Spare parts for old cars
Body Mount D Parts, model spare set, purple
319000357€7.49
This purple D Parts body mount set provides molded replacement components for a compatible model build and keeps the specified colour match consistent when a repair or refresh calls for the same parts group. The sprue format presents each piece on a single runner, with mirrored elements and small mechanical forms arranged for clear identification before removal. Visible shapes on the frame include 2 large ring-like bracket pieces, 2 small mirrored arm components, 2 cylindrical cup-like parts, 2 larger housing sections, several small connector-style pieces and 2 ball-ended rod parts. That mix points to a coordinated mechanical section rather than a single loose spare, which helps maintain matching geometry across linked mounting points. The injection-molded finish gives these small parts defined edges and uniform surfaces, useful when a build depends on clean seating and consistent alignment. As an unassembled spare-parts frame, the set suits planned maintenance, replacement of lost pieces or a colour-matched rebuild of the same section. On the bench, the runner format helps keep small components together until the fitting stage. In a repair session, the grouped layout makes it easier to compare paired left and right shapes, separate only the needed pieces and continue the build with the correct purple parts set for the intended assembly.
Spare parts for old cars
Frog 2005 Wheel Adapter Set for Reissue Buggies
300053913€18.29
This wheel adapter set is made for reissue buggy conversions where wheel choice matters. The hexagonal aluminium adapters allow The Frog 2005 and other specified chassis to use off-road tyres and wheels sold separately, changing the wheel mounting format for a wider range of buggy setups. The set contains 2 aluminium wheel adapters, 2 4 mm flange lock nuts and 2 stainless steel 2 x 10 mm shafts. Those parts form a compact hardware package for the wheel mounting area, with the shafts passing through the adapter and the lock nuts securing the assembly in place. The machined aluminium construction gives the adapters a clean, technical finish, while the stainless steel shafts add the matching metal hardware needed for the conversion. Compatibility is stated for chassis 58354 The Frog 2005, 58346 Hornet 2004, 58346 Grasshopper 2005, 57746 XB Grasshopper and 57741 XB Hornet. Used on a reissue buggy build, the set supports a switch to separately sold off-road wheel and tyre combinations that suit the chosen look or running surface. It also fits restoration work on older chassis where the original wheel format is being updated with compatible buggy wheels. Warning! Not suitable for children under 14 years.
Spare parts for old cars
Front Bumper Grasshopper Hornet RC Spare Part
310445007€4.99
This front bumper for Grasshopper and Hornet is a dedicated RC spare part that replaces a damaged or missing front-end section with the correct shape for the model's original layout. The black moulded piece has a symmetrical frame with a central upper loop, tapered side arms and reinforced struts, creating a defined structural form at the nose of the vehicle. Three mounting holes are integrated into the lower section, with one in the centre and one on each side, so the part can be positioned at the front mounting area as intended for these models. The open braced geometry keeps the component focused on its structural role while preserving the recognisable outline shown on the original design. Rounded end sections on the outer arms complete the profile and give the part its characteristic front bumper shape. This replacement suits repair work after heavy running, workshop overhauls or the completion of an older chassis that is missing front hardware. It also fits restoration projects where the aim is to return a Grasshopper or Hornet to a more complete and correct front-end appearance with the proper dedicated bumper component.
Spare parts for old cars
Front Upright Pink (2), RC spare part pair
319804623€7.69
Front Upright Pink (2) is a replacement RC spare part set with 2 mirrored front upright components, each carrying a silver metal axle spindle with a threaded tip. The shape shown in the part design supports wheel mounting at the outer front corner while linking the assembly to the steering and suspension points on the vehicle. Each piece combines a larger pivot hole at the top with 2 smaller mounting holes at the lower end, giving the front corner the attachment points needed for movement and alignment. The left and right layout is clearly mirrored, so the pair matches both sides rather than repeating the same side twice. The bright pink finish also makes the parts easy to separate from other chassis components during repair or rebuild work. Metal spindles are already attached, so the wheel mounting shaft and upright arrive as one assembly. This pair suits maintenance tasks where worn, bent or missing front corner hardware needs to be replaced with matching left and right parts. On the workbench, the mirrored forms, visible mounting holes and threaded axle ends make it easy to identify how each upright fits into the front steering assembly of a compatible RC model.
Spare parts for old cars
Front Upright Set F-103/Grasshopper II
300050395€11.39
The Front Upright Set F-103/Grasshopper II is a chassis parts set for RC model maintenance, centered on the front steering area where precise fit matters most. With 21 pieces in the scope of delivery, the set provides the core hardware needed to replace worn front upright parts and restore the intended steering layout on supported Formula platforms. Compatibility covers F104PRO II, F104Ver.II PRO, F104W, F104 and TRF103, which makes this set useful across several established chassis generations. For TRF102 chassis and TRF101 chassis, the data specifies adjustment with 53585 shim, so the installation can be matched to those layouts as required. The included parts are intended for front-end assembly work rather than general chassis use, which keeps the application clear when servicing a car after running sessions or preparing a fresh build. On the bench, this set suits routine replacement of front upright components, careful steering rebuilds and targeted setup work around the axle carriers and related mounting points. It also fits the needs of hobbyists who keep multiple compatible Formula chassis in service and want the correct front suspension and steering parts ready for maintenance. Warning! Not suitable for children under 14 years.
Spare parts for old cars
Grasshopper Hornet chassis, RC spare part, black
310335050€12.69
This black chassis part for Grasshopper and Hornet models restores the central structure that carries the main assemblies of the vehicle. The moulded tub-style form combines side walls, mounting posts, screw holes and slots in one component, creating the defined base needed when a worn or damaged frame has to be replaced. Raised supports and cross braces are built into the moulding, so matching parts can be positioned against the chassis geometry already formed into the piece. The front and rear sections show reinforced mounting areas with several connection points for attaching the surrounding assemblies. That layout matters during repair work because the chassis is the reference part that determines how the rest of the model sits and aligns. The black finish matches the part designation, while the one-piece construction keeps the replacement focused on the core frame rather than a collection of separate brackets. Used in a restoration, rebuild or maintenance project, this spare chassis gives Grasshopper and Hornet models the correct base for reassembly. It suits workshop tasks where the original frame has cracked, worn at the mounting points or needs to be exchanged during a longer-running RC model refresh.
Spare parts for old cars
Hornet Clamp Aluminum Wheel Hubs 2-Piece Set
300022043€28.29
This 2-piece set of clamp-type aluminum wheel hubs is designed as a focused upgrade for classic Tamiya off-road models, replacing the kit-standard B5 parts with a more rigid wheel connection. Each hub clamps onto the wheel axle instead of relying on a simpler fit, which helps keep wheel attachment precise and supports smoother rotation while the model is running. The set includes 2 aluminum wheel hubs and screws for attachment, keeping the mounting hardware aligned with the upgrade itself. A blue anodized finish gives the hubs a clear visual contrast at the wheel area, adding a technical accent that stands out during assembly and once the model is on display. The clamp construction is the key mechanical difference here: tightening the hub onto the axle creates a firmer interface between axle and wheel, which is especially useful where accurate wheel seating matters. Compatibility is stated for the Hornet, Frog, Lunch Box, Monster Beetle, Grasshopper, Subaru Brat and Fast Attack Vehicle. That makes the set a practical choice for restoring, refining or visually updating several well-known chassis in one parts family. On a bench build or a running model, the hubs bring together precise attachment, aluminum construction and a distinctive blue finish in one compact upgrade. Warning! Not suitable for children under 14 years.
Spare parts for old cars
M2 Screw 2x8mm, model spare screws, 10-pack
319805556€2.89
This 10-pack of M2 screws in 2 x 8 mm format is built for precise fastening work on compatible model assemblies, with the stated application aimed at 3-pc front wheels. The compact size and machine-thread form suit small-scale hardware jobs where matching dimensions matter for a clean fit and dependable hold. Each screw uses a rounded pan head with a cross-slot drive, a combination that supports careful tool engagement during replacement or maintenance work. The silver-coloured metal finish keeps the pack easy to sort alongside other workshop hardware, while the uniform thread and head shape help maintain consistency across repeated fittings. As a dedicated spare-parts pack, it suits restocking after a lost fastener, preparing a rebuild bench, or keeping identical screws ready for later service. In practical use, the pack fits neatly into routine model upkeep, whether a front wheel is being reassembled, a worn screw is being exchanged, or matching hardware is needed to complete a repair without mixing sizes. The 10-piece count also leaves reserve screws available for future maintenance on the same compatible wheel setup.
Spare parts for old cars
4mm Adjuster (3) Pink, model accessory
310440549soon available again
This set of 3 pink 4 mm adjusters adds a clearly specified accessory part for model maintenance and replacement tasks where the exact diameter matters. The bright pink finish gives the small parts quick visual distinction in a parts tray, tool case or work area, helping separate them from similar hardware during ongoing setup work. The pack combines a defined 4 mm size with a 3-piece quantity, which supports matched use across repeated connection points or keeps spare parts ready for later service. For hobby benches that handle frequent tuning, rebuilds or part changes, a clearly marked adjuster size helps keep component selection consistent. The compact format also suits organised storage alongside other model hardware, where colour coding can speed up identification before fitting. Whether used during routine maintenance, a replacement job or a fresh parts sort, these adjusters fit naturally into detail-focused model work. The set works well as a small stock addition for builders who keep commonly used fittings on hand for future repairs and setup changes.
Spare parts for old cars
Battery Cover Side Bar Parts Set in Purple
310007507soon available again
This purple C Parts set focuses on two clearly defined component groups: a battery cover and side bar sections. Supplied as moulded parts on a single sprue, it gives model builders a direct way to replace damaged pieces or complete a matching rebuild with the correct colour group already formed into the parts. The layout shown here includes long bar-shaped sections, smaller support pieces and a larger ribbed panel, all kept attached to the frame until separation. That format helps with part control on the workbench, especially when only one section of a model needs attention rather than a full rebuild. The designation C Parts identifies this as a specific spare set rather than a general accessory mix, which is useful when a repair calls for the right shape in the right area. The purple finish also matters in restoration work, where matching visible sections can be as important as replacing the broken piece itself. On the bench, this set suits careful maintenance, rebuild projects and the sorting of stored spare components by colour and part group. It also fits planned refresh work where a battery cover or side bar section needs to be replaced while keeping the rest of the model unchanged.
Spare parts for old cars
Chassis Grasshopper II, RC chassis spare part
310335092soon available again
The Chassis Grasshopper II is a dedicated RC chassis spare part for repair, restoration and rebuild work on the matching model. Its molded tub layout forms the lower frame section, with raised side walls, internal compartments and a central platform that create the base structure for the vehicle's mechanical and electronic installation. Multiple mounting posts, precision-placed screw holes and molded cutouts define where compatible assemblies connect to the frame. Front and rear upright support sections extend the chassis layout for attaching further modules, while the recessed interior areas help organize the placement of installed components within the lower body. The black molded construction follows the familiar form of a model chassis base rather than a decorative shell, making it relevant wherever the original frame needs replacement after wear or damage. This part suits workshop use during maintenance, parts replacement and long-term model upkeep. It can serve as the starting point for bringing a Grasshopper II back into running condition, or as a fresh base for rebuilding an existing vehicle with correctly positioned mounting features already formed into the chassis.
Spare parts for old cars
Front Suspension Arm A Parts in Purple
310007505soon available again
This front suspension arm A parts set in purple is a chassis component for model maintenance, repair and rebuild work. The part group is intended for the front suspension area, where correct fit and free movement matter for clean assembly and dependable operation. The purple colour makes the component easy to distinguish during parts sorting and workshop preparation. As a replacement set, it can be used when original suspension arms are worn, damaged or no longer moving as intended. Keeping the correct A parts on hand helps streamline service work and supports a tidy rebuild process when the front end is being refreshed. The defined part designation also helps match the component to the correct assembly step instead of relying on guesswork during maintenance. This component suits bench work, spare-parts storage and planned chassis servicing between running sessions. It also fits repair jobs where the front suspension section needs a like-for-like replacement part to bring the model back into working order.
Spare parts for old cars
Gearbox B Parts, model spare parts, purple
319000355soon available again
These purple gearbox B parts provide a direct source of molded replacement components for model maintenance and repair. The sprue layout keeps each piece together until removal, while the matching color helps maintain a consistent look on a build that uses purple gearbox sections. The set includes 2 large housing halves with tall cylindrical towers, multiple mounting holes and ribbed structural bracing. Smaller round parts sit in the center of the frame, including a gear- or pulley-like disc and 2 matching circular pieces with curved slot patterns. That combination gives a clear mechanical focus: enclosed casing sections supported by smaller shaped parts that fit the same gearbox area. The molded form is suited to replacing worn, missing or damaged sections without mixing unrelated shapes. On the bench, these parts support careful restoration work, rebuilds after wear, or the completion of an unfinished model that needs the correct gearbox section. The attached sprue format also helps with part handling and identification before trimming, test fitting and installation into the intended assembly.
Spare parts for old cars
Hornet Purple chassis, RC spare part frame
319335644soon available again
The Hornet Purple chassis is a replacement frame component for an RC model build, shaped as the main lower structure that carries compatible assemblies in one defined base. Its one-piece injection-molded form combines raised side walls, mounting holes, screw posts and rectangular cutouts, creating the fixed geometry needed when worn or damaged original parts need to be exchanged. Reinforcing ribs are molded directly into the frame to support the structure across the base, while the front fork-like mounting arms provide a dedicated connection point for matching chassis sections. The layout shown on the frame indicates space for internal hardware such as steering parts, axle mounts, motor installation points and an onboard battery area, but this spare part is supplied as the chassis component itself rather than as a complete vehicle assembly. The purple color matches the Hornet Purple designation and helps separate this frame from other workshop parts during maintenance. Used on the bench for repair, restoration or a fresh rebuild, the chassis gives compatible components a defined starting structure for reassembly. It suits replacement work where the original lower frame has cracked, worn at the mounting points or needs a color-matched swap within a Hornet Purple project.