VW model car
From cult classics such as the VW Beetle to modern icons: our VW model cars bring the unique driving experience straight to your home. Discover the love of detail and find your favourite model!
Model car kits 1:24
1:24 Volkswagen Beetle 1300 1966, model kit
300024136€27.99
This 1:24 Volkswagen Beetle 1300 1966 model kit brings one of the most recognisable compact cars into a static scale build with the unmistakable rounded roofline, curved fenders and period detailing of the classic Beetle. The finished model captures the character of the 1966 version, a form widely regarded as one of the clearest expressions of the original design. The assembly kit is built around reproduced exterior and interior sections, so the shape of the cabin, body and trim develops step by step during construction. Openable front hood and rear engine lid add another layer of detail to the completed car, allowing the model to be viewed as more than a sealed silhouette on a shelf. The source vehicle was known for its platform chassis, air-cooled flat-four engine and four-wheel independent suspension, details that help define the Beetle's place in automotive history. Cement, paints and tools are required separately. On a desk, in a display cabinet or alongside other classic road car builds, the compact 1:24 format gives the Beetle a strong presence without demanding much space. The 600 minute assembly time suits a longer, steady build rhythm, with painting, fitting and finishing shaping the final look of this 1966 Volkswagen icon. Warning! Not suitable for children under 14 years.
Off-road RC cars
1:10 Porsche 911 GT3 992, RC assembly kit, TT-02
300058714€184.99
This 1:10 R/C model assembly kit brings the Porsche 911 GT3 992 into a hobby format with a sharply formed polycarbonate body, separate rear wing and separate light cases. At 467 mm long, 188 mm wide and 131 mm high, the finished car has the low, stretched proportions that make the full-size GT3 instantly recognizable on the bench and in motion. The TT-02 chassis gives the model a 251 mm S-size wheelbase and a shaft-driven 4WD layout, pairing straightforward construction with a platform known for adaptable setup options. Separate black molded parts depict the side mirrors and wing stays, adding extra definition where painted body shells often flatten smaller details. Dark gun metal dish wheels sit under the body with a purposeful fit, and the included Urethane Bumper L supports the front end during running. The kit also comes with stickers and masking stickers, helping the paint scheme and exterior markings land with cleaner edges. During assembly, the separate wing, light cases and mirror parts create a more layered finish than a one-piece shell alone. Once built, the 4WD layout, radial tire setup and 251 mm wheelbase suit repeated laps on paved sections, car park courses and mixed club surfaces. Radio gear, a battery pack, a charger and paints are required separately.
On-road RC cars (2WD/4WD)
1:10 Volkswagen Golf II GTI 16V, RC assembly kit
300058748€164.99
This 1:10 R/C model assembly kit captures the Volkswagen Golf II GTI 16V in a compact hatchback form with a lightweight polycarbonate bodyshell and a long 239 mm wheelbase. At 383 mm long, 170 mm wide and 138 mm high, the model combines classic road-car proportions with a chassis layout built for hands-on assembly and tuning. Under the shell sits the MB-01 chassis in a front-motor, front-wheel-drive configuration. Its center frame allows changes between front- and rear-wheel drive by altering the attachment directions of the final gears and steering linkage, and rear-wheel-drive setups can also use a low or high motor position. The chassis also offers 3 wheelbase choices, giving broad scope for layout changes within the same platform. A 4-wheel double wishbone suspension with symmetrical structure and friction dampers manages movement at each corner, while unitized sections for the motor mount, final gears and suspension support straightforward maintenance. Separate black molded parts depict the side mirrors and bumpers, and transparent parts form the headlights and taillights for a more complete exterior finish. Porous dish wheels are paired with radial tires to match the road-car character of the subject. The bodyshell is not pre-painted. Radio gear, a battery pack, a charger and paints are required separately. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 VW Beetle Rally, RC assembly kit, 4WD
300058650€174.99
The 1:10 VW Beetle Rally pairs a classic rally silhouette with the MF-01X chassis, creating an RC assembly kit that looks distinctive on the bench and carries that character onto road and flat dirt. At 397 mm long and 163 mm wide, the model uses a 239 mm L wheelbase that gives the Beetle body its correct stance while leaving room for the shaft-driven drivetrain layout underneath. The clear polycarbonate shell recreates the Beetle's rounded form, and separate metal-plated parts are used for the bumpers and side mirrors. Front light pods and rally-style stickers shape the competition-inspired finish without changing the unmistakable Beetle profile. Under the shell, power from the Type 540 Torque Tuned electric motor is transmitted through gear differentials, with drive routed to the rear wheels and forward by propeller shaft to the front axle. The chassis can also be assembled into S and M wheelbases with separately sold propeller shafts. An electronic speed controller is included. Radio gear, a battery pack, a charger and paints are required separately. On smooth tarmac, the 4-wheel double wishbone layout helps the chassis stay composed through direction changes, while on flat dirt the rally block tires and independent suspension work with the shock absorbers to keep the model moving with control. The result is a build that combines detailed body finishing, mechanical layout and mixed-surface running in one focused RC project.
Stickers
1:10 VW Golf II GTI 16V Sticker Bag, decal set
319490164€14.29
This 1:10 sticker bag is made for the VW Golf II GTI 16V Street body and brings the shell closer to its full road-car look with model-specific graphics and masking pieces. The decal sheet carries body-side stripes, grille elements, headlight graphics, rear light details, wipers and Volkswagen Golf markings, while the separate masking sheet prepares the clear body for paint work on the window areas. The masking stickers are cut for front, rear, left front, right front, left rear and right rear window sections, so the paint stage can follow the body lines more closely. Larger masks use a center strip in the lining to help keep placement aligned while the backing is removed. Smaller round and side pieces support detail work around secondary areas of the shell. A separate label section adds ON, OFF and caution markings that suit switch locations and finishing touches on the completed model. On the bench, this set supports the paint and detailing stage rather than the mechanical build, giving the shell the trim contrast and printed markings that define the Golf II GTI 16V shape. It suits replacement work on a used body as well as a fresh finish on a new shell where crisp window borders and accurate exterior graphics matter.
On-road RC cars (2WD/4WD)
1:10 VW Golf II GTI 16V, RC assembly kit, MB-01
300047516€185.99
This 1:10 R/C assembly kit captures the Volkswagen Golf II GTI 16V in rally form on the MB-01 chassis, pairing a compact hatchback shape with a front motor, front-wheel drive layout. The lightweight polycarbonate bodyshell arrives pre-painted in PS-34 Red with PS-31 Smoke, so the body lines, window tint effect and overall stance come together quickly once mounted on the chassis. The model measures 383 mm in length, 170 mm in width and 138 mm in height, with a long 239 mm wheelbase that suits the MB-01 configuration used here. Separate black molded parts recreate the side mirrors and bumpers, while transparent components depict the headlights and taillights with added depth. A 540 torque-tuned electric motor and an electronic speed controller are included. The MB-01 platform also uses unitized sections for the motor mount, final gears and suspension, a layout that keeps the structure organized during assembly and later maintenance. On the bench, the combination of 4-wheel double wishbone suspension, friction dampers, porous dish wheels and radial tires gives the chassis a clear mechanical character. Once built, the compact proportions and FF drivetrain make it well suited to tight driving lines and flowing runs on smooth ground. Radio gear, a battery pack and a charger are required separately. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 VW Karmann Ghia, RC assembly kit, M-06
300058677€174.99
The 1:10 VW Karmann Ghia RC assembly kit brings a classic coupe silhouette to the M-06 platform, combining vintage road-car character with a rear-wheel-drive chassis layout. Its lightweight polycarbonate body reproduces the flowing roofline and compact proportions of the original, while separate plated parts for the side mirror, bumpers and light cases sharpen the finished look. This version uses the 239 mm wheelbase M-06L chassis. The rear-mounted motor works with a longitudinal battery pack, and the R/C units sit on either side to keep the layout low and evenly balanced. That arrangement gives the chassis a low center of gravity and a composed feel through direction changes. Marking stickers and masking stickers are included for the paint job, allowing the exterior trim and lighting details to be finished with clean separation. Metal-plated wheels complete the period look and work with the tyre setup to support stable cornering. With overall dimensions of 410 x 182 x 125 mm, the model has enough size to show off the Karmann Ghia shape both on the bench and in motion. It suits builders who enjoy body finishing as much as chassis setup, and it leaves room for later tuning with Hop-Up Option parts available for the M-06 platform.
Stickers
Volkswagen Golf II GTI 16V Rallye Sticker Bag
319490076€25.89
This sticker bag is made for the Volkswagen Golf II GTI 16V Rallye bodyshell and brings the full rally identity back onto the car through model-specific graphics, trim markings and window masks. The sheet layout supports body finishing work that goes beyond a single logo, covering the large blue exterior graphics as well as the smaller visual details that give the shell its recognisable competition character. Alongside the main Volkswagen Motorsport livery, the set carries VW badges, number plate markings, black pinstripes, lamp graphics, grille details, hood vents, rear hatch markings and small switch labels. A separate yellow masking sheet is included for painting clear window sections, with marked positions for left front, right front, left rear and right rear areas. This combination supports both visual accuracy and a cleaner paint process on a clear RC body. The graphics are arranged for 1:10 R/C Volkswagen Golf II GTI 16V Rally body use, matching the model-specific shape and trim layout shown on the sheets. The set suits fresh body projects as well as refurbishment work when an older shell needs replacement markings after use or repainting. Applied over a painted bodyshell, the decals restore the sharp contrast of the blue works-style graphics, while the masks help keep glazing areas defined during the paint stage.
Body kits
VW Golf II GTI 16V Rally Body Set, RC body
300051706€40.99
This clear body set brings the classic shape of the VW Golf II GTI 16V Rally to 1:10 RC builds with a lightweight polycarbonate shell and model-specific exterior parts. The compact hatchback form, flared arches and rally-inspired proportions give compatible chassis a period-correct motorsport character once painted and finished. The set is made for long M-Chassis applications and is compatible with the MF-01X chassis in L specification with a 239 mm wheelbase. Alongside the main shell, the set provides separately molded components for the bumper, side mirrors and light cases, so the body can be finished with more defined front and side detail than a shell alone. The clear shell format is intended for painting, and the included masking stickers help cover window areas during the paint job. Marking stickers add the rally graphics shown for this body style, while metal attachment parts are supplied for fitting. Polycarbonate light cases are also compatible with separately sold 5 mm LEDs, which allows an illuminated setup on suitable builds. On the bench, the unpainted shell offers a clean base for a custom color scheme; once mounted on an MF-01X chassis with the correct 239 mm wheelbase, the finished body suits display runs, club sessions and scale-focused rally builds.
Attachment parts
VW Golf II GTI/Rally, model parts, H bumper
319007434€9.19
This H parts set for the VW Golf II GTI/Rally focuses on exterior detailing with black bumper components that help restore the correct look of the body shell or complete a fresh build with matching trim. The sprue layout keeps each section connected before cutting, making it easier to identify the required pieces at the workbench and prepare them for fitting. Alongside the bumper elements, the frame also carries smaller exterior parts that support a more complete finish. Mirror-style pieces, round lamp-style housings and compact mounting arms add further body details drawn from the same moulded set. The black material suits builds that need dark trim straight from the frame, while the attached layout helps with part handling before cleanup and installation. For repair projects, the set can replace missing or damaged exterior sections without changing the rest of the body configuration. On the bench, these parts fit naturally into body restoration, detail correction or a careful rework of an existing shell. They also suit a stored kit that needs fresh trim parts before painting, final assembly or display in completed form.
Body kits
VW Golf II GTI/Rally, RC body shell, WB239mm
311820077€18.49
The VW Golf II GTI/Rally body shell brings classic hatchback lines into RC form with a transparent polycarbonate shell that is ready for a custom finish. Molded bonnet, roof, door and rear hatch details give the shape a recognisable road-car character before paint, decals or final trimming are added. Its clear, unpainted surface supports a wide range of paint schemes, while the lightweight shell format suits hobby builds where body choice shapes both appearance and fit. The widened fenders and side skirt contours push the silhouette toward a tuned street look rather than a plain stock outline. A 239 mm wheelbase reference helps when matching the shell to a suitable chassis layout and checking body post position before mounting. As a separate body component, this shell is aimed at builders who want to change the look of an existing RC car or start a fresh bodyshell project around a familiar full-size vehicle shape. On the bench, the shell can be trimmed, painted and test-fitted to refine stance and wheel placement. Once mounted, the compact 2-box profile and flared arches give touring or drift chassis a distinct period-inspired look that stands out in running sessions and display storage alike.
On-road RC cars (2WD/4WD)
1:10 VW Type 2 (T1), RC assembly kit, M-06
300058668soon available again
This 1:10 RC assembly kit captures the Volkswagen Type 2 T1 in its 23-window Samba Bus form, pairing the unmistakable van body with the M-06L chassis for a layout that mirrors the rear-engine character of the original. The clear polycarbonate shell gives builders a lightweight body to finish, while separate molded parts add definition to the bumpers, side mirrors and lamp areas. Under the body, the M-06 chassis places the motor at the rear and drives the rear wheels, with the battery pack mounted longitudinally and the RC units arranged on the sides. That layout supports balanced weight distribution and a low center of gravity across the 239 mm wheelbase. A 540 motor and an electronic speed controller are included to complete the drive package, and metal-plated dish wheels reinforce the classic look once the shell is painted and trimmed. Many tuning parts are available as options for further chassis setup changes. On the bench, the body offers plenty of detail to bring out the split-window bus shape, roof glazing and trim lines with careful finishing. On the road, the rear-wheel-drive M-06L platform gives the model a character that suits the full-size Type 2 inspiration. Radio gear, a battery pack, a charger and paints are required separately.
Attachment parts
Golf II GTI J Parts, clear lightcase set
319115555soon available again
This J Parts lightcase set supplies clear molded components for the Golf II GTI and brings back the sharp lamp detailing that gives a scale car body its finished look. The transparent parts arrive on a sprue, making each section easy to identify before removal and fitting during a careful model build or restoration task. The set focuses on the light areas of the body and is suited to replacing worn, missing or damaged clear sections on a compatible Golf II GTI model. The molded runner shown in the set keeps the individual pieces organized until they are trimmed free, which supports precise preparation at the bench. Clear material is especially useful on lamp sections because it preserves the intended lens appearance instead of covering those areas with opaque parts. The compact parts layout also makes this set a practical addition to a spares box for ongoing maintenance of an existing build. On a restoration project, the fresh clear sections help return definition to the body shell once the main paint and trim work are complete. For a new compatible build, the set supports accurate finishing of the lighting details and gives the model a cleaner, more complete appearance when viewed up close.