Toyota model car

Model car kits 1:24

1:24 Toyota Supra, plastic model kit

€28.49

This 1:24 Toyota Supra plastic model kit recreates the 1993 sports coupe as a static display build with the strong proportions that defined the full-size car. The wide body, oversized rear wing and distinctive coupe profile give the finished model a planted look that stands out on a shelf, while the steerable front wheels add a mechanical touch during final positioning. Construction focuses on the areas that give the car its character. The kit reproduces the engine bay and interior, so the build moves through chassis work, cockpit detail and front-engine installation rather than only closing up a body shell. Wheel assembly follows the original staggered layout with narrow front tyres and wide rear tyres, and the instructions also show left- and right-side specific parts for the front upright setup. Builders can finish the body in 1 of 6 documented colour schemes for the 1993 Supra, including Metallic Silver, Super Red, Super White, Black, Deep Blue and Dark Brownish Gray Mica, with black or two-tone interior treatments. Assembly time is stated as 600 minutes. Cement and paints are required separately. Once completed, the model suits display in a cabinet, on a desk or alongside other 1:24 road car builds, where the detailed bodywork, cockpit and engine area reward viewing from several angles.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota Celica LB Turbo Gr.5, model kit

€30.99

This 1:24 scale plastic model assembly kit recreates the Toyota Celica LB Turbo Gr.5 with the stretched proportions and aerodynamic add-ons that made the racing car so distinctive. Wide fenders and a large rear wing shape the silhouette, while the finished dimensions of 192 mm x 87 mm x 52 mm give the model a strong shelf presence. The build focuses on visible race-car structure as much as outer form. Inside, the cockpit is rendered with a roll cage, and the underside carries separate chassis detail that stays interesting even after assembly. Suspension features are also reproduced, giving the model more to study than the body alone. Mesh wheels and solid synthetic rubber slick tires complete the competition look with the right contrast between spoke pattern and tire surface. Cartograf decals provide crisp markings, and the set also contains 1 driver figure plus 2 car numbers for a more defined finishing scheme. On the worktable, the kit suits careful painting, decal placement and detail picking across body, cabin and underside. Once completed, the Celica works equally well as a display model that rewards close viewing from the front, side and low rear angle. Paints and glue are required separately, and a manual is included.  Warning! Not suitable for children under 14 years.

Model car kits 1:20

1:20 Toyota Celica LB Turbo Gr.5, plastic model kit

€46.99

This 1:20 plastic model assembly kit captures the Toyota Celica LB Turbo Gr.5 in the dramatic proportions of a late-1970s silhouette racer. At 240 mm long, 105 mm wide and 61 mm high, the finished car brings the low nose, boxed arches and large rear wing into a display size that shows the shape clearly from every angle. The build goes beyond the outer bodywork with an authentic cockpit, roll cage and inline-4 engine layout. Removing the front cowl reveals the engine detail after assembly, so the finished model can be shown with mechanical features on view as well as with the body closed. The kit also includes a full body driver figure for the cockpit, adding a human scale reference inside the racing interior. Solid synthetic rubber slick tires complete the competition look with the broad, smooth tread style associated with circuit cars of the period. For finishing, the kit provides high quality Cartograf decals and 2 marking options to depict car no.68 or no.56. That choice lets the build lean toward 2 distinct race identities while keeping the same body and mechanical layout. Assembly time is stated as 600 minutes. Paint and cement are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Supra (JZA80), RC assembly kit, 2WD

€154.99

The 1:10 Toyota Supra (JZA80) RC assembly kit combines the long, low shape of Toyota's 1993 flagship sports car with the configurable BT-01 platform for hands-on on-road running. At 457 x 185 x 135 mm, the finished model carries the Supra profile with a wide stance, a defined nose and the visual presence of a full-size coupe scaled for the bench and track. The BT-01 center frame is designed so the battery pack, motor and RC equipment setup can stay in place while the final gears and steering linkage are repositioned to change the drivetrain layout. That structure allows front-wheel drive, front-motor rear-wheel drive and midship rear-motor rear-wheel drive choices, with 6 setups available in total. Unitized sections for the motor mount, final gears and suspension keep the chassis layout organized during the build and during later maintenance. A Type 540 Torque-Tuned motor and ESC are included, and many Hop-Up Option parts for TT-chassis cars can be used for further setup tuning. The 4-wheel double wishbone suspension mirrors left to right and works with friction dampers for a clear, mechanical on-road setup. The 1.0 mm polycarbonate body gives the shell its light form over the chassis, making the Supra lines stand out during painted display and radio-controlled driving sessions alike. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Supra, RC assembly kit, TT-02D

€194.99

The 1:10 Toyota Supra on the TT-02D platform brings a well-known sports car shape into a drift-focused RC assembly kit with a 257 mm wheelbase and a detailed polycarbonate bodyshell. The body traces the aggressive lines of the original release from kit 58392, and carbon pattern decals for the engine hood and rear wing add a tuned street-racing look once the shell is finished. This version uses the TT-02D drift spec, a specially tuned form of the TT-02 chassis built around shaft-driven 4WD. Separately molded side mirrors and rear wing parts add extra scale definition, while an aluminum motor heat sink supports the included 540 SPORT TUNED motor during running. An electronic speed controller is included in the kit, so the core drive package is already matched to the chassis layout. The 24 mm Drifttech tires sit on metal-plated mesh wheels, giving the model the right contact patch and visual style for drift sessions. On a smooth indoor surface or a prepared hobby track, the combination of drift tires, oil dampers and the TT-02D layout supports long slides, quick direction changes and steady transitions. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Castrol Toyota Tom's Supra GT, model car kit

€26.99

This 1:24 scale model car kit recreates the Castrol Toyota Tom's Supra GT from the 1995 Japanese GT Car Championship with the low, wide silhouette and competition livery that made the race machine stand out on the grid. The static display format keeps attention on the car's aerodynamic bodywork, from the enlarged fenders to the prominent rear wing and the additional intake and outlet shaping worked into the shell. The kit is designed as an assembly build and includes the parts needed for the model itself. A detailed cockpit, accurately reproduced chassis undersurface and suspension components give the finished car substance beyond the outer body, so the model reads convincingly from above, through the windows and from lower viewing angles. Solid synthetic rubber slick tires reinforce the race-spec appearance, while the 1:24 scale suits shelf display alongside other sports car subjects in the same size class. Assembly time is stated as 600 minutes. Cement and paint are required separately. On a worktable, the body, chassis and interior sections invite a measured build with trimming, painting and decal placement. Once completed, the Castrol Toyota Tom's Supra GT brings 1990s Japanese GT racing character to a desk, display cabinet or collection focused on touring cars and competition machines.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota G.R. TS050 HYBRID, plastic model kit

€58.99

The 1:24 Toyota G.R. TS050 HYBRID brings the 2018 endurance racer to the workbench as a plastic model kit with the low, sculpted form of the original car. At 194 mm long, 79 mm wide and 44 mm high, the finished model gives the TS050 HYBRID a compact display footprint while preserving the long front overhangs, enclosed cockpit and tightly packaged rear bodywork that define this prototype. The body reflects the 2018 specification with reworked aerodynamic parts inside and out, plus the longer front fenders and diffuser changes used on that version of the car. The interior is not left empty: the cockpit area shows the driver seat and the lithium-ion battery, so the hybrid race car layout remains visible beyond the outer shell. A metal-plated part recreates the silver roof section, and separate metal transfers are supplied for the side mirrors and headlight sections to give those small surfaces a cleaner finish than paint alone. Assembly is required, with a stated build time of 600 minutes. On the bench, the combination of body shaping, plated trim and race markings supports a focused paint and finishing session with clear visual progress at each stage. Cement and paints are required separately, and the included decals for the number 7 and 8 cars allow the completed model to be finished in either of the two 2018 race configurations.

Model car kits 1:24

1:24 Toyota GT-One TS-020 LeMans '99 model kit

€38.99

This 1:24 plastic assembly model kit recreates the Toyota GT-One TS-020 from LeMans '99 with the long, low body shape that defined Toyota's endurance racer. At 202 mm long and 84 mm wide, the finished model gives the car's stretched cockpit, deep front overhang and broad rear deck enough room to read clearly on a shelf or in a display case. The body focuses on the GT-One's aerodynamic development, with the nose and diffuser reproduced as distinct forms rather than simplified surfaces. A removable rear cowl reveals the detailed V8 twin turbo engine after completion, adding a second viewing angle that suits static display. The kit is based on the 1999 race car and includes markings for car no. 1 and 3, allowing the finished build to follow two entries from that Le Mans field. Masking seals are also included to support cleaner paint separation on the complex body curves and canopy area. Assembly time is stated as 600 minutes. On the workbench, the model suits a measured build with painting, decaling and final display all playing a clear role in the result. Once completed, the low-slung silhouette, exposed engine view and endurance-racing livery give the car a strong presence whether shown from the nose, the rear deck or with the cowl removed.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Toyota Bundle

Product bundle consisting of: 1:10 RC Toyota GR 86 (TT-02) / PS-5 Black Polycarbonate 100ml / PS-60 Bright Mica Red Pc.100ml / PS-31 Clear Smoke Polycarbonate 100ml   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 T/GR Yaris Rally1 Hybrid, RC assembly kit

€159.99

This 1:10 RC assembly kit brings the T/GR Yaris Rally1 Hybrid onto the TT-02 platform with a polycarbonate bodyshell that captures the compact, aggressive rally silhouette in 416 mm length, 190 mm width and 146 mm height. Separate polycarbonate front light cases add layered detail to the nose, while the 257 mm wheelbase gives the chassis the proportions required for this body style. Black molded parts reproduce the side mirrors, side ducts, caps and the 2-piece large rear wing, adding the distinct aero elements seen on the full-size rally machine. Under the shell, the shaft-driven 4WD TT-02 chassis uses a straightforward longitudinal layout that keeps the drivetrain centered and supports stable running characteristics. Dark gun metal multi-spoke wheels and racing radial tires complete the stance, while the included urethane bumper supports body fitment at the front. The box also provides stickers and masking stickers for the paint job, helping the livery and window areas come out with cleaner separation. On the bench, the kit offers a focused build with body finishing, chassis assembly and detail fitting all tied to one clearly defined rally subject. Once assembled, the combination of the Torque-Tuned motor and ESC supports brisk running sessions on paved ground, while radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:10 Toyota 4x4 Pick Up Bruiser 2012 RC kit

€819.99

This 1:10 RC assembly kit recreates the Toyota Hilux Pick-Up RN36 with the tall, high-lift stance that made the 1980s truck so distinctive. At 525 mm long, 278 mm wide and 275 mm high, the model carries real visual presence, while the ladder frame layout brings the structure of the full-size vehicle into the build itself. The chassis uses a longitudinally mounted Type 540 motor, a shaft-driven 4WD system and front and rear 6-pinion differential gears. Gear ratios of 54.63:1 in 1st, 40.49:1 in 2nd and 27.92:1 in 3rd define how the 3-speed transmission changes the driving feel across terrain. Front tread measures 200 mm, rear tread 218 mm, and the complete model weighs 3.2 kg. Metal parts are used throughout for a strong mechanical look, and the live axle setup reflects the full-size truck with metal axle housings, leaf springs and oil dampers. The detailed body, flared fenders and large tyres suit shelf display just as naturally as outdoor running on loose ground. Radio gear, a battery pack, a charger, transmitter batteries and an electronic speed controller are required separately.

On-road RC cars (2WD/4WD)

1:10 Toyota Celica GT-Four RC, RC assembly kit

€154.99

This 1:10 RC assembly kit brings the Toyota Celica GT-Four RC (ST185) onto the TT-02 platform with a bodyshell that carries the coupe's curved profile, rear wing, side mirrors and distinctive rally-era character. At 450 mm long, 187 mm wide and 136 mm high, with a 257 mm wheelbase, the finished car has the proportions to fill the chassis cleanly and present the Celica shape with convincing scale presence. The bodyshell uses 1.0 mm polycarbonate, keeping weight low while allowing the painted finish and sticker set to define the model's exterior details. Masking stickers are supplied for the window areas, helping the paint job stay crisp around the glazing lines. Under the shell, the shaft-driven 4WD TT-02 chassis uses a straightforward drivetrain layout that suits regular on-road running and setup work alike. An included Type 540 Torque-Tuned motor and ESC complete the core drive package for electric RC use. 5-spoke wheels and tread pattern racing radial tires reinforce the road-going look and match the Celica's classic performance style. On a smooth car park, club track or driveway, the combination of 4WD traction and the TT-02 layout supports controlled cornering and clean acceleration. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Celica GT-Four RC, RC assembly kit

€154.99

The 1:10 Toyota Celica GT-Four RC assembly kit brings the shape of the ST185 to the TT-02 platform with a pre-painted 1.0 mm polycarbonate bodyshell, white finish, smoke-tinted windows and a full-size stance set by the 257 mm wheelbase. At 450 mm long, 187 mm wide and 136 mm high, the model carries the proportions of the homologation road car into an on-road R/C format with clear visual presence. The TT-02 chassis uses a shaft-driven 4WD layout and front and rear double wishbone suspension with coil spring dampers, giving the running gear a straightforward, widely used base for tuning and maintenance. Pre-cut wheel arches and pre-made body mount holes reduce body preparation work, while stickers and masking stickers support the final exterior finish. The bodyshell still requires cutting out, attachment work and detail painting on selected parts. Cockpit parts and driver are not included. On-road sessions highlight the long, curved body lines, rear spoiler and 5-spoke wheel design as the car tracks through sweepers and tighter sections. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Toyota Celica GT-Four ST205, body set

€40.99

This 1:10 body set brings the shape of the Toyota Celica GT-Four ST205 to compatible touring car chassis with a clear polycarbonate shell that is ready for trimming, painting and detailing. The 1.0 mm body captures the coupe profile with defined lamp recesses, grille lines, hood scoop contours and a prominent rear wing, giving the finished car the sharp road-going stance of the original model. The set is supplied as a clear body part package for builders who want to create a custom finish rather than start with a prepainted shell. Marking stickers add model names, light graphics and trim details, while masking stickers help keep window sections and paint lines clean during the spray process. Metal parts for attachment are also included, supporting the mounting work needed before the shell goes onto the chassis. The body is made for 257 mm wheelbase cars and is compatible with TT-01 Type-E and TT-02 platforms, excluding TT-02B, TT-02T and TT-02FT. On the bench, the clear shell allows each stage of the finish to be planned around the molded panel lines and cut points. Once mounted, the low coupe shape, rear spoiler and Celica-specific detailing give touring car runs a distinct late-1990s performance look with a body style that stands out on tarmac layouts and display shelves alike.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota GR 86, RC assembly kit, TT-02

€154.99

The 1:10 Toyota GR 86 brings modern coupe styling to a radio control build centered on the TT-02 chassis, a shaft-driven 4WD platform made for on-road running. Its 257 mm wheelbase gives the body its correct stance over the chassis, and the low, wide shape reads clearly whether the car is lining up for a first shakedown run or sitting on the bench between build stages. The body is formed in polycarbonate and arrives as an assembly kit, so the shell is trimmed, painted and finished with markings during the build. Separate sidemirrors, light cases, masking stickers and body fittings add definition to the final look, while the body mounts are adjusted so the shell clears the tyres and track surface correctly. Front and rear suspension geometry is handled by double wishbones with coil spring damping, a layout that supports predictable handling on paved surfaces. The package also includes an electronic forward and reverse speed controller. Radio gear, a battery pack, a charger and paints are required separately. On the workbench, the GR 86 body gives the build a clear sequence of cutting, masking and finishing steps that show off the model's detailed lines. Once assembled, the TT-02 platform suits car park sessions, smooth tarmac circuits and other paved spaces where a 4WD touring chassis can stretch out cleanly.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Toyota Land Cruiser 40, RC assembly kit, CC-02

€264.99

This 1:10 RC assembly kit recreates the Toyota Land Cruiser 40 with the upright proportions and expedition character that made the original 4WD so distinctive. At 390 mm long, 198 mm wide and 237 mm high, the model has a substantial trail-ready presence, and the polycarbonate body keeps the shell light while preserving the crisp, boxy silhouette of the 1972 FJ40V. Under the body sits the CC-02 cross country chassis, developed for off-road driving and built around a ladder frame layout inspired by full-size vehicles. The 252 mm M-size wheelbase sets the proportions, and short 76 mm propeller shafts are included as part of the drivetrain package. Separately molded roof rack and light pod parts extend the scale look above the body line, while the detailed shell is joined by grille, mirror and indicator components that sharpen the finished appearance. A Type 540 motor and included ESC complete the core running hardware. The clear body is supplied unpainted, leaving room for a custom finish on domestic or export style builds. Radio gear, a battery pack, a charger and paints are required separately. Once assembled, the combination of block tread tires, scale bodywork and cross-country chassis layout suits rocky paths, compacted dirt and shelf display between running sessions.

Off-road RC cars

1:10 Toyota Land Cruiser 40, RC assembly kit, CC-02

€274.99

The 1:10 Toyota Land Cruiser 40 assembly kit brings classic 4WD character to the CC-02 platform with a yellow pre-painted body and the upright proportions of the 1972 FJ40V. At 390 mm long, 198 mm wide and 237 mm high, the model has the tall, square stance that makes the Land Cruiser 40 instantly recognizable on a trail course or shelf. The polycarbonate bodyshell keeps weight down, while separate molded parts add definition to the grille, mirrors, turn signals and roof rack with light pods. A 252 mm M-size wheelbase sets the proportions on the chassis, and the included 76 mm short propeller shafts match the layout. Oil-filled dampers support the chassis over uneven ground, and the ladder frame construction follows the full-size vehicle theme with a structure suited to cross-country driving. Silver 12-spoke wheels and block pattern tires complete the period look, and the sticker set combines window and window frame sections to reduce extra paint work during finishing. Cockpit parts and a driver figure add another layer of scale detail once the body is completed. The finished model suits slow trail sessions, obstacle lines and display between runs, with the roof rack, raised ride height and classic Land Cruiser shape giving it a strong presence in each setting. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Supra (JZA80), RC assembly kit, BT-01

The 1:10 Toyota Supra (JZA80) RC assembly kit combines the long, low shape of Toyota's 1993 flagship sports car with the adaptable BT-01 platform for a build that stays engaging well beyond the first setup. At 457 mm long, 185 mm wide and 135 mm high, the finished car carries a strong on-road stance, while the 257 mm wheelbase gives the Supra body its stretched, planted proportions on the chassis. The BT-01 center frame is designed so battery pack, motor and R/C equipment can stay in place while drivetrain layout changes are made around them. By changing the attachment directions of the final gears and steering linkage, the chassis can be reconfigured between front-wheel drive and rear-wheel drive layouts. For rear-wheel drive, both front motor and midship rear motor positions are available, giving 6 total setup patterns across the platform. A Type 540 Torque-Tuned motor and ESC are included, and many Hop-Up Option parts for TT-chassis cars can be used for further tuning. That combination suits builders who enjoy comparing chassis behavior on the same body shell instead of moving to a completely different car. On-road sessions, setup testing and workshop adjustments all gain extra depth from a platform that can be rebuilt around different drive and motor positions while keeping the Toyota Supra (JZA80) identity at the center of the project.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Toyota Tundra HighLift, RC assembly kit

The 1:10 Toyota Tundra HighLift brings the shape of the second-generation double cab pickup into an RC assembly kit with a tall stance, large-diameter tyres and a chassis layout that follows the full-size truck closely. At 500 mm long, 216 mm wide and 238 mm high, the model has a broad road presence, and the combination of an injection-moulded bodyshell and exposed underframe gives it a convincing scale look whether it is parked on a shelf or moving over rough ground. Much of the character comes from the construction itself. Metal parts are used for the ladder frame, leaf springs and friction dampers, so the running gear has the same visual weight as the body above it. An RS540 motor and ESC handle the drive, while the 3.1 kg chassis gives the truck a planted feel. The set also contains custom parts including a roll bar, grille guard and roof carrier with 2 snowboards, allowing different finished looks without changing the core truck design. The 3-speed gearbox and shaft-driven 4WD suit slow trail sections, uneven surfaces and more open stretches where the taller ratio can be used. On a workbench, the detailed mechanical layout keeps the build engaging; on the ground, the long frame, rigid axles and pickup proportions create the unmistakable presence of a lifted truck. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota Celica GT-Four, plastic model kit

€24.99

The 1:24 Toyota Celica GT-Four captures the compact, muscular shape of the rally-bred coupe in a static display model that puts body form, surface detail and careful finishing at the center of the build. The large rear spoiler, hood intake, quad headlight layout and coupe profile give the finished car a strong road-going stance that stands out in a cabinet or on a desk. This kit is part of the 1/24 Sports Car Series No. 133 and is supplied as an assembly kit for a full build that extends well beyond the outer shell. The body is joined by a reproduced engine bay, a separate interior with dashboard, center console and seats, and clear window parts that define the glazing cleanly once fitted. The instructions also show left-hand and right-hand steering configurations, adding another layer of model-specific detail during construction. Paint guidance is extensive, with body colours and smaller trim areas called out across the build, and decals are used to complete exterior markings and finishing touches. With an assembly time of 600 minutes, the project suits measured work sessions where trimming, test fitting, painting and decal placement can each get proper attention. Plastic cement and paints are required separately. Once completed, the Celica GT-Four works equally well as a focused weekend build spread across stages or as a longer bench project built up section by section.

Model car kits 1:24

1:24 Toyota GR 86, plastic model kit

€41.99

The 1:24 Toyota GR 86 plastic model kit brings the shape of Toyota's modern sports coupe into a focused scale build with crisp body contours, a compact 2-door profile and the GR 86's distinctive front grille. In red finish, the completed car presents slim headlights, black mirror caps, dark window areas and a subtle rear spoiler that give the model a clean, road-ready stance on the shelf. Separate chassis detailing adds substance beyond the outer body. The underside shows molded suspension forms, aerodynamic floor sections, a silver exhaust run and a large rear muffler, so the model carries visual interest even when viewed from below. Black multi-spoke wheels and low-profile tyres reinforce the current sports coupe look, while visible touches such as the shark-fin antenna, rear light treatment and dual round exhaust outlets sharpen the scale impression. Assembly is required, and the stated assembly time is 600 minutes. The build suits slow, careful bench sessions where body preparation, paint selection and detail finishing shape the final result step by step. Once completed, the GR 86 works equally well as a display car in a collection of modern road vehicles or as a standalone build that highlights Toyota coupe styling in 1:24 scale.

Model car kits 1:24

1:24 Toyota GR Supra Custom, plastic model kit

€38.99

This 1:24 scale plastic model assembly kit recreates the Toyota GR Supra Custom as a detailed static display model with a finished size of 183 mm long, 85 mm wide and 54 mm high. The low, athletic proportions and the tuned exterior give the coupe a strong shelf presence, whether shown in a single-car display or alongside other modern road car builds. The body styling focuses on the custom specification, with spoilers, side skirts and side door garnishes worked into the shape of the car rather than treated as separate visual extras. New F Parts supply the aerodynamic components together with parts for the trunk spoiler and wheels, which helps the build reflect the intended TRD-inspired look in a consistent way. The shaped interior and chassis add further structure to the model, while the suspension detail supports a convincing stance beneath the body. TRD 19-inch aluminum wheels are reproduced in scale, and the new decals carry realistic TRD logo renderings for the center hubs. Metal transfers and masking stickers are included. Cement and paint are required separately. The build also offers a choice of Japan, U.S. and Europe versions, allowing the finished car to be tailored to a preferred regional specification. On the workbench, that mix of body detailing, wheel design and version choice gives the assembly process a clear visual payoff at each stage. Once completed, the model suits display in a cabinet, on a desk or as part of a 1:24 sports car lineup.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 TOYOTA GR Supra, plastic model assembly kit

€44.99

The 1:24 TOYOTA GR Supra plastic model assembly kit brings the latest generation coupe into Tamiya's long-running Sports Car Series with a compact display size of 183 mm long, 85 mm wide and 54 mm high. Its sculpted bodywork carries the GR Supra's long nose, short deck proportions and double-bubble roof into a format that rewards careful assembly and finishing. Separate molding for the bumper, A pillar and front grille helps define the exterior surfaces with cleaner part separation, while the cabin adds a console, dashboard and seats with individual headrest components. The kit can be assembled as Japan, U.S. or Europe specification, using dedicated left- and right-hand drive part positions rather than a single generic layout. The underside is not treated as a flat base: a detailed exhaust system runs beneath the car, and the front and rear suspension are built from multiple parts for added realism. Top-grade Japan-market RZ 19-inch wheels are recreated with 2-piece construction that combines metal-plated and black components, and the tyres carry realistic tread. Metal transfers sharpen small finishing details, and masking stickers help define the window areas during painting. Cement and paints are required separately. With around 600 minutes of assembly time, the kit suits a measured bench session and finishes as a detailed static model for shelf, cabinet or desk display.

Model car kits 1:24

1:24 Toyota GT86, plastic model kit, opening hood

€49.99

The 1:24 Toyota GT86 plastic model kit brings the compact sports coupe into a display scale with a body length of 177 mm and width of 84 mm. Its low roofline, short deck and crisp surfacing are reproduced to reflect the character of the original car, while the opening hood adds a second viewing angle that shifts attention from the exterior to the engine bay. Inside that engine compartment, the boxer engine layout gives the build a clear mechanical centerpiece rather than a closed body shell alone. The underside continues that technical approach with molded suspension and drivetrain detail, so the model carries interest above and below the beltline. In the cabin, the front wheels are linked to the steering wheel, creating a direct relationship between wheel position and cockpit detail when the finished car is posed. Metal transfers are used for manufacturer emblems and mirror surfaces, and metal-plated headlight and taillight fixtures add a distinct finish to the lighting areas. With an assembly time stated as 600 minutes, the kit suits a slower bench session built around painting, detailing and final presentation. On a shelf, desk or display case, the GT86 works equally well with the hood raised to show the engine compartment or closed to emphasize the coupe's clean profile and balanced proportions.

Model car kits 1:24

1:24 Toyota Soarer 2000VR-Turbo, plastic model kit

€21.49

This 1:24 scale plastic model kit recreates the Toyota Soarer 2000VR-Turbo in a compact display size of 192 mm long, 75 mm wide and 56 mm high. The body shape focuses on the coupe's sharp aerodynamic lines, giving the finished car a low, crisp stance that stands out on a shelf, desk or display case. The build goes beyond the outer shell with detailed treatment of the cabin and the chassis underside, so the model rewards close viewing from more than one angle. A sliding sun roof adds a mechanical touch to the finished car, with a choice of steel type or glass type during assembly and an opening and closing function once built. One driver figure is included to complete the cockpit scene. Decals supply the seat patterns and body stripes, helping the interior trim and exterior graphics match the character of the full-size car. On a worktable, the kit offers a focused car-model project with clear visual progress as the body, cabin and running surfaces come together. Once completed, the Soarer suits static display where the roof position, tire texture and stripe details can be appreciated at close range. Cement and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya 1:10 RC Toyota Tundra Bundle

Product bundle consisting of: 1:10 RC Toyota Tundra HighLift 3-Speed / FS Reflex Stick II 2.4 GHz 6CH   Article number: 300058415 Product: 1:10 RC Toyota Tundra HighLift 3-Speed Article number: 300058415 Product: RC Toyota Tundra HighLift 3-Speed The Tundra is a full-size pick-up truck made by Toyota for the North American market. In 2007, the Tundra underwent a model change, and this is a 1/10 R/C assembly kit of the double cab version of this second generation Tundra. The model features a ladder frame chassis just like the actual truck, and is also equipped with a 3-speed transmission and shaft-driven 4WD system. Many metal parts such as the ladder frame, leaf springs, and friction dampers provide a unique assembly experience while the injection-molded body shell and large diameter tires accurately reproduce the high-lift's imposing appearance. Futhermore, parts such as a roll bar, grille guard, and roof carrier with 2 snowboards are included to let you customize your ride. Add separately available LED lights for an even higher level of realism. ● Length: 500mm, Width: 216mm, Height: 238mm, Weight: Approx. 3.1kg. ● Motor: Type RS540 ● Drivetrain: Shaft-driven 4WD ● Diff. Gear: Front/Rear 2-bevel Diff. ● Suspension: Fron/Rear Leaf Rigid ● Dampers: Front/Rear Friction Dampers ● Gear Ratios: 1：64.39 (Low), 1：35.20 (2nd), 1：21.14 (Top) ● Speed Controller: ESC     Article number: 500501006 Product: FS Reflex Stick II 2.4 GHz 6CH Carson Reflex Stick II 2.4 GHz (500501006) is an inexpensive, modern 6-channel remote control for RC vehicles and boats. Two joysticks, a button and a switch control six channels independently. Interference-free 2.4 GHz FHSS, servo reverse, trim function and charging socket; operates on 4×AA (6 V), BEC 4.8-6 V, Graupner J/R; recommended: Receiver 500501537 and AA batteries 500609042.  

On-road RC cars (2WD/4WD)

1:10 Toyota Celica GT-Four, RC kit, TT-02 4WD

soon available again

The 1:10 Toyota Celica GT-Four on the TT-02 chassis brings classic rally styling into an RC assembly kit with a strong visual link to the ST165 competition car. White, red and black race graphics, a rear spoiler and multi-spoke wheels give the finished model a focused motorsport look that stands out on smooth tarmac and indoor driving surfaces. The clear polycarbonate bodyshell is trimmed, painted from the inside and finished with window masks and a full marking set, so the build combines chassis assembly with body preparation and livery work. The body set specification gives a 257 mm wheelbase, which aligns the coupe proportions with the chassis layout. Mounting points are prepared with 6.5 mm holes, and the body is secured with 6 mm snap pins once fitted to the posts. Tinted window treatment, grille paint areas and wheel markings add extra finishing steps that sharpen the scale appearance without changing the underlying ST165 form. On-road running suits the rally-inspired shape especially well, whether the model is being built for regular RC sessions or for shelf display between drives. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:10 Toyota Land Cruiser LC300, RC assembly kit

soon available again

This 1:10 RC assembly kit recreates the Toyota Land Cruiser LC300 with the upright proportions and strong road presence of the full-size SUV. At 472 mm long, 200 mm wide and 192 mm high, the model has a substantial footprint, and the 267 mm wheelbase gives the body and chassis the stretched, planted look associated with the Land Cruiser name. The bodyshell uses 1.2 mm polycarbonate to keep weight down while preserving the shape of the LC300, and the finish is supported by separate detail parts that define key exterior areas. Metal-plated H parts depict the door mirrors, light cases and front grille sections, while pearl white molded K parts render the door handles and the shark fin antenna on the roof. A Type 540 motor and included ESC complete the drive package. The kit also includes the CC-02 chassis, whose ladder frame construction echoes full-size off-road engineering and suits cross-country running with 4WD control. On the trail, the combination of block pattern tires, oil-filled dampers and the CC-02 layout suits dirt paths, rocky sections and uneven ground where suspension movement and traction matter. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

Tamiya 1:10 RC Toyota Celica GT-Four Bundle

soon available again

Product bundle consisting of: 1:10 RC Toyota Celica GT-Four TT-02 / 7,2V/1800mAh NiMH Race Battery TAM   Article number: 500608221 Product: 7,2V/1800mAh NiMH Race Battery TAM 500608221 - 7.2V/1800mAh NiMH race battery TAM from Carson: This racing pack delivers reliable power especially for RC vehicles and other model building applications and is fast-charging and high-current discharge capable. Technical data: 7.2 V, 1800 mAh, max. charging current 1.8 A; connection: Tamiya plug system. Fits many RC models.  

On-road RC cars (2WD/4WD)

1:10 RC ENEOS X PRIME GR Supra TT-02

available in stores

Article number: 300047514 Product: 1:10 RC ENEOS X Prime GR Supra TT-02 Here is another 1/10 R/C model assembly kit based on our popular TT-02 chassis. The ENEOS X PRIME GR Supra of ROOKIE Racing with a prominent orange color scheme is one of six GR Supra cars taking part in the Super GT series GT500 class in 2024. The carbon fiber body inspired by the GR Supra street car has aerodynamic devices – which differ for each manufacturer – at the front and rear and on door undersides. Its 2-liter 4-cylinder turbo engine is capable of 550hp and powers the rear wheels. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Toyo. Ce.GT-Four ST205 blk.TT-02

available in stores

Tamiya welcomes this limited edition version of Item 58743 1/10 R/C Toyota Celica GT-FOUR (ST205) (TT-02) with the polycarbonate body pre-painted in Black (PS-5) with Smoke (PS-31) windows, with pre-cut wheel arches and pre-made body mount holes, which is great for not only beginners but also R/C veterans. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat Body.   Warning! Not suitable for children under 14 years.