RC Axes & RC drive shafts
Everything for the drive: discover high-quality axles, drive shafts and other important components for your RC models so that your vehicle is always reliable and powerful on the road.
RC Axes & RC drive shafts
Everything for the drive: discover high-quality axles, drive shafts and other important components for your RC models so that your vehicle is always reliable and powerful on the road.
More
Axes & drive shafts
12 mm Wheel Hub Hexagon Set, RC chassis accessory
300053056€10.59
This 12 mm wheel hub hexagon set brings a clean aluminium upgrade to the wheel mounting area on a wide range of RC chassis. The pin-type design pairs each hex hub with a matching pin, creating the interface that transfers drive from the axle to the wheel while keeping the fit consistent during assembly, maintenance and parts replacement. The scope of delivery includes 4 wheel hub hexagons and 4 pins. The aluminium construction gives these small drivetrain parts a crisp machined look, and the 12 mm hex format matches the standard wheel mounting size used across many compatible on-road and off-road platforms. Fitment listed in the data covers CR-01, DF-03, DF-02, DT-03, DT-03T, DT-02, F103GT, M-06, M-06 PRO, M-05, M-05 PRO, M-05 ver.II PRO, MF-01X, TT-02B, TT-02FT, TT-02RR, TT-02D, TT-02 TYPE-SR, TT-02 TYPE-S, TT-02, TT-01D TYPE-E and TT-01 TYPE-E chassis. For workshop stock, rebuilds or replacing worn wheel mounting parts, this set covers one full chassis with 4 matching hubs and pins. It suits bench work where exact chassis compatibility matters and keeps the wheel mounting hardware aligned with the specified 12 mm standard used by the listed platforms. Warning! Not suitable for children under 14 years.
Axes & drive shafts
37mm SwingShafts, RC spare part for XV-02
300051700€16.19
These 37 mm SwingShafts are a focused RC spare part for keeping compatible chassis setups running cleanly and consistently. Designed for the XV-02 chassis, they replace worn swing shafts in the assembly universal area, where accurate fit and free movement matter to drivetrain response and stable operation during repeated running sessions. Each shaft is marked A • 37 and the set supplies 2 matching parts for the same specified length. The black rod form with metal inserts at both ends reflects the compact mechanical role these parts play inside the chassis assembly. On TT-02 based cars, the shafts can also be used alongside Item 54623 and 51444 for defined compatibility. Combined with Item 54874, they also allow a wider camber angle adjustment range on the TT-02 chassis, opening more setup latitude for fine tuning suspension geometry. This kind of replacement suits regular workshop maintenance, rebuilds after heavy use, or planned setup changes between chassis configurations. In a tuning session, fresh shafts can restore precise movement in the relevant assembly area, while in a parts box they serve as a chassis-specific option for XV-02 and selected TT-02 builds.
Axes & drive shafts
39mm Drive Shaft Set, RC spare part for TT-01E
300050883€12.99
This RC spare part set provides 2 drive shafts in a 39 mm format for selected Tamiya chassis. Designed for TA-01, TA-04, TA-05 and TT-01E platforms, the shafts sit in the drivetrain where rotating assemblies need a compact link that can keep transmitting power while suspension parts move through their travel. Each shaft uses a straight center section with rounded ends and cross pins, a dogbone-style layout commonly used to connect outdrives and wheel-side drive components. That shape allows the shaft to articulate inside the drivetrain rather than acting as a fixed rod, which matters when a chassis is cornering, accelerating or running over uneven surfaces. The 39 mm dimension is the key fit point here, so matching the stated length is essential when replacing worn or missing drivetrain parts. Supplied as a 2-piece set, the pack suits paired servicing work without forcing a mixed left and right setup. In workshop use, these shafts fit naturally into rebuilds, maintenance sessions and parts-box planning for compatible touring car chassis. They also make sense as a trackside spare when a running session calls for a quick drivetrain refresh on TA-01, TA-04, TA-05 or TT-01E based models. Warning! Not suitable for children under 14 years.
Axes & drive shafts
3x23mm Turn-Buckle Shaft, RC spare part, 4 pcs
309805780€4.69
This set of 4 turn-buckle shafts in 3x23 mm format adds a precise replacement option for RC model maintenance and setup work. The metal shafts are threaded on both ends and use a compact central section that supports handling during installation, removal and adjustment inside a linkage assembly. Used in steering or similar connection points where exact length matters, turn-buckle shafts allow the assembly to be tuned by changing the effective linkage position rather than replacing the whole mechanism. The 3x23 mm specification is the key fit detail for matching an existing compatible build, and the pack of 4 provides a practical quantity for servicing paired linkage points or keeping matching spares on hand. The dark metallic finish and cleanly cut threads reflect the functional, workshop-focused character of the part. These shafts fit naturally into bench work such as replacing worn connectors, refreshing a running chassis or preparing a model for its next setup session. In a parts box, pit case or hobby drawer, a matched set of 4 helps keep compatible RC assemblies ready when a linkage needs a fast, like-for-like swap. Warning! Not suitable for children under 14 years.
Axes & drive shafts
44mm TRF L.F. Drive Shafts, RC spare part
300042362€22.49
These 44 mm TRF L.F. drive shafts are built for double cardan joint drivetrains that use swing shaft caps from Item 54921. The steel construction and fluorine surface coating focus on two key demands in RC driveline tuning: controlled movement at the joint and reduced friction where the shaft is working under load. Supplied as 2 matching shafts, the set supports a balanced left and right installation in compatible chassis layouts. A key update is the 10.8 mm needle pin section, which is 1 mm longer than on previous shafts. That extra length is specified to get more from swing shaft cap option parts, making these shafts a targeted upgrade for builders refining a double cardan setup rather than changing unrelated areas of the car. The LF44 marking shown on the shafts helps identify the part during maintenance or when several driveline options are kept in a pit box. In workshop use, these shafts suit rebuilds after wear, planned driveline updates, or a fresh parts selection for a compatible competition chassis. They are best matched with the stated cap system, where the longer pin section and low-friction coating can be used as intended in the assembled transmission layout.
Axes & drive shafts
45mm Drive Shafts, TRF421 spare part set
300042387€18.99
These 45 mm drive shafts for TRF421 are a focused drivetrain spare for model car maintenance, supplied as 2 matching parts for Low Friction Double Cardan Joint Shafts. The dark metal shafts are marked LF45 and use a straight shaft form with joint ends shaped for the matching assembly. At the shaft end, each part uses a 10.8 mm needle pin. This detail is specified to work together with Item 54921 Reinforced Swing Shaft Caps, with 2 pieces each for front and rear fitment. The compatibility note is narrow by design: these shafts are only for cars that use Item 54921, which keeps the replacement choice tied to the correct drivetrain layout instead of a broad universal fit claim. As a spare part set, the pair supports maintenance after wear in the transmission area and restores the intended shaft length of 45 mm on both sides. The 2-piece format suits workshop stock, scheduled rebuilds and targeted repairs on a TRF421 setup. In a bench session, the matched pair helps keep the drivetrain specification consistent when replacing both corresponding shafts in the same assembly. Warning! Not suitable for children under 14 years.
Axes & drive shafts
46 mm TRF Swing Shafts, RC accessory, aluminium
300051760€18.99
These TRF 46 mm aluminium half cardan shafts add a focused drivetrain upgrade for compatible RC chassis, combining low weight with a ball bearing mounted layout that helps the axle rotate with less friction. In running, that reduced drag supports steadier power delivery through direction changes, where speed loss at the shaft can affect how cleanly a car carries momentum. The set contains 2 lightweight 46 mm swing axles and is intended as a chassis-specific accessory rather than a universal fit part. The half cardan design suits drivetrain maintenance, replacement work and targeted tuning where the shaft assembly is a key wear point. For TRF421X use, the specification names compatibility with ball bearing set 51762 and differential joints 51764 when the shafts are installed on the TRF421 chassis 42384. That combination gives a clear reference for planning a matching drivetrain setup instead of mixing unspecified parts. On the bench, the defined 46 mm length helps identify the correct shaft format before installation. During track use, the ball bearing mounted construction supports smoother axle movement in repeated corner entries and exits, where friction control matters most in a responsive RC drivetrain. Warning! Not suitable for children under 14 years.
Axes & drive shafts
A-Parts Axlehousing CC-01, spare parts set
300005519€22.79
A-Parts Axlehousing CC-01 is a spare parts set for the CC-01 platform and is listed as parts for 58132. The black injection-molded runner carries several unused structural components in one frame, including axle housing style sections and mounting pieces that support a clean replacement job when original parts need to be swapped. The molded layout keeps each piece attached until removal, which helps with identification before assembly and reduces mix-ups between similar shapes. The visible parts include long housing sections, bracketed elements and a larger case-like component, all formed with mounting holes and connection points that suit chassis or drivetrain installation. Because the pieces come as a matched set on one sprue, builders can replace damaged sections with components produced together rather than mixing unrelated leftovers from a parts box. This kind of spare set fits naturally into bench maintenance, rebuild work and parts sorting between running sessions. When a CC-01 chassis needs fresh housing components after wear or breakage, the set provides the specific molded forms needed to return the assembly to working order.
Axes & drive shafts
BB-01 D-Parts Suspension Arms, chassis spare set
300051713€12.79
The BB-01 D-Parts suspension arm set supplies the core chassis pieces that guide wheel movement at both the front and rear of a BB-01 build. With 2 front arms and 2 rear arms in the pack, the set supports a matched replacement across both ends, keeping the suspension layout consistent when worn or damaged parts need changing. Each arm is molded in glass fiber-reinforced nylon, a material choice suited to detailed chassis parts with hinge-pin mounts and outer pivot points. The shared right and left component shape reduces sorting during maintenance, since the same form is used on both sides. The included D-Parts for the BB-01 chassis focus on the mechanical areas that control suspension travel and the connection points around the wheel assemblies. This set fits workshop use, routine upkeep, or a rebuild after hard off-road sessions with a BB-01 machine. It also works as a practical spare to keep alongside other chassis parts, ready for quick replacement when the front or rear arm assemblies need attention.
Axes & drive shafts
BB-01 Dogbone Shafts, RC spare part, steel
300022068€18.99
These BB-01 Dogbone Shafts are a dedicated steel spare part for the BB-01 chassis and supply a matched pair for drivetrain service. The 2 shafts use the classic dogbone layout, with a pinned ball end on one side and a cup-style joint end on the other, so rotational force can pass between connected drivetrain parts while suspension movement changes the working angle. Crafted in carbon tool steel, the shafts focus on the part of the drivetrain that sees repeated motion under load. The black metal finish and the identical left and right pieces shown in the set make them suited to a like-for-like replacement when an existing pair needs renewal. As a chassis-specific component, the fitment stays tied to the BB-01 platform rather than a broad universal range, which helps keep maintenance accurate and parts selection straightforward. On a bench build, repair session or routine drivetrain refresh, this 2-piece set covers the shaft pair in one pack. It suits keeping a running chassis in service, replacing worn transmission links, or preparing spares for future maintenance on BB-01 based RC vehicles.
Axes & drive shafts
BB-01 Front Upright Set, RC spare parts, 2 pcs
300051712€7.19
The BB-01 C-Parts front upright set supplies 2 replacement components for the front end of a BB-01 chassis, giving RC model maintenance a direct way to renew a key mounting area. Each upright is molded in glass fiber-reinforced nylon, a material choice that suits parts handling steering pivot loads, wheel support points and repeated workshop fitting. The set uses the same component shape for right and left, which simplifies parts identification when a front corner is being rebuilt. The large circular opening in each upright forms the bearing seat area, while the molded mounting points connect with the surrounding chassis hardware. As C-Parts for the BB-01 platform, these pieces belong to the chassis structure itself rather than to bodywork or trim, making them relevant for repair, upkeep and keeping an existing build in running condition. On a bench setup, the pair can replace worn, damaged or missing originals during a front-end refresh on a BB-01 model. The 2-piece format also suits keeping matching spares on hand for routine service, especially when steering and wheel support components need to be exchanged as a pair.
Axes & drive shafts
BB-01 T Parts, rear suspension mount set
319225237€14.29
The BB-01 T Parts rear suspension mount set is a focused replacement and maintenance set for the specified suspension area, giving builders the exact molded shapes needed for work on the rear mounting section. The sprue format keeps the components together in one organized frame until removal, which helps with part identification before fitting begins. The visible layout includes multiple molded pieces in black and dark gray, with each shape formed for a technical role within the assembly rather than as a generic mixed parts pack. Numbered positions on the runner support orientation during workshop handling, and the molded frame format helps keep smaller connectors and bracket-style pieces grouped before installation. This makes the set useful when a damaged mount section needs renewal or when a build calls for the named BB-01 rear suspension area to be rebuilt with matching parts. On the bench, the set suits careful repair sessions, planned maintenance, or keeping key replacement parts ready alongside an existing BB-01 build. It also works well as workshop stock for model owners who prefer to keep the specified suspension mount section serviceable with the correct dedicated parts.
Axes & drive shafts
Bevel Pinion Gear, spare part for model drivetrain
305455040€3.59
This bevel pinion gear is a dedicated spare part for model drivetrain service, built to pass rotational force through an angled gear interface inside a transmission assembly. The compact metal component combines a toothed upper edge with a conical body, making it suitable for mechanical layouts where direction changes within the drive line are required. Reinforced rib-like shaping along the gear body adds structural definition to the part itself, while the central mounting opening is formed for installation on a shaft or axle. That layout supports correct positioning within the surrounding mechanism and helps restore clean meshing when an original gear shows wear or damage. Supplied as 1 individual gear, it suits selective replacement work where only the affected transmission element needs to be exchanged. The plain silver-gray finish keeps the mechanical form easy to identify during maintenance and parts sorting. In workshop use, this spare gear fits repair jobs on model assemblies that rely on compact internal power transfer between connected drivetrain parts. It also serves as a practical replacement to keep an existing build in running condition after wear in a heavily used transmission section. Warning! Not suitable for children under 14 years.
Axes & drive shafts
BT-01 C Parts, wheel axle spare parts set
300051732€6.99
The BT-01 C Parts set supplies original replacement components for the BT-01 chassis, centering on wheel axle and centre shaft parts used in the drivetrain. Differential cup joints, axle shafts, dogbone shafts and propeller shaft joints are grouped on one sprue, giving a direct source for matching parts when a running chassis needs repair or a rebuild calls for fresh hardware. These components handle connection and rotation transfer inside the BT-01 layout. Dogbone shafts link moving drivetrain sections, while cup joints and shaft ends sit at key handoff points between connected assemblies. Using original parts helps maintain the intended fit of the chassis design and keeps replacement work aligned with the existing BT-01 structure. The set is described as C Parts wheel axles and centre shaft, which makes its role within the chassis system clear for maintenance planning. This spare parts set fits workshop use, routine upkeep and targeted replacement after wear or damage in regular RC running. It also supports keeping a BT-01 chassis ready for the next rebuild session by covering several related drivetrain components in one pack. Compatible with the BT-01 chassis. Warning! Not suitable for children under 14 years.
Axes & drive shafts
BT-01 T Parts, RC spare parts, suspension arms
300051736€6.79
The BT-01 T Parts set is an original spare parts sprue for the BT-01 chassis, bringing together key structural pieces used around the suspension and body mounting areas. Molded in black and supplied as a single T runner, the set gives a direct source for replacing worn, damaged or missing chassis parts while keeping the fit aligned with the BT-01 platform. Alongside suspension arms, the sprue carries body mounts, bumpers and damper shafts, plus further related pieces formed as part of the same runner. The image layout shows mirrored left and right components, support posts, mounting sections and smaller braces, which helps identify each part before installation. This kind of grouped spare set is useful when several connected areas need attention at once, rather than replacing only one isolated piece. As an original spare part from Tamiya, it is intended to match the chassis design named in the data rather than serve as a universal RC car part. On the bench, the set suits routine maintenance after repeated running sessions, impact damage or a rebuild of a BT-01 chassis. It also helps keep a parts box stocked with core replacement pieces that are often needed around suspension and body support points. Warning! Not suitable for children under 14 years.
Axes & drive shafts
C Parts R.Suspen./Gearb., RC spare parts sprue
319005130€13.79
C Parts R.Suspen./Gearb. is a dedicated RC spare parts sprue for the 58618 Mt.Beetle, centered on rear suspension and gearbox components. The black molded frame groups the matching pieces in one place, giving repair and replacement work a clear starting point when an original section needs to be renewed. The sprue format keeps the individual parts attached until trimming, which helps with handling and identification during workshop preparation. Visible on the frame are larger housing-style sections, round cover-like pieces, bracket forms and smaller connector details, all molded as technical components rather than generic craft material. This format also helps confirm that the replacement shapes match the intended assembly area before fitting begins. For RC model maintenance, that matters most when gearbox and suspension sections need the correct geometry at their mounting points. Used during a rebuild, after wear, or when a damaged section needs to be exchanged, this spare parts frame supports a direct return to the specified model configuration. It fits naturally into a hobby bench setup focused on servicing an existing 58618 Mt.Beetle rather than starting a new full kit. Batteries are not included. Warning! Not suitable for children under 14 years.
Axes & drive shafts
CC-01 B-Parts, steering servo saver spare set
300005520€15.79
CC-01 B-Parts brings the steering and servo saver section together in one spare parts sprue, giving compatible builds a direct route back to clean mechanical function. The black injection-molded runner presents the parts in an organized layout, with larger mirrored pieces, smaller linkage forms and circular clips arranged for clear identification at the bench. This set is intended as replacement hardware for the CC-01 rather than as a complete vehicle kit, so the focus stays on the steering assembly where accurate fit matters most. Visible molded part numbers such as 8, 9, 10, 11 and 13 help distinguish the individual shapes during preparation. The runner format keeps each component attached until needed, which supports tidier handling while checking the required section against an existing build. Glossy black molded surfaces and crisp edges reflect the technical character expected from RC maintenance parts. On a repair bench, the sprue suits worn steering sections, missing servo saver pieces or a planned refresh of an older chassis. It also fits neatly into a spares collection for hobby work, where keeping the correct CC-01 steering parts close at hand can shorten downtime between rebuild sessions.
Axes & drive shafts
CC-01 Universal Joint, model accessory for Pajero
304135042€15.99
The CC-01 Universal Joint is a dedicated model accessory for Pajero 58132 and serves as a replacement drivetrain part where a precise rotating connection is needed. Its universal-joint design allows torque to pass between connected parts even when the angle changes, which is important on a chassis layout that moves through steering and suspension travel. Used during maintenance or repair, this component helps bring a worn drivetrain area back to a defined mechanical fit. The clear CC-01 designation keeps the application focused on the matching platform, while the Pajero 58132 reference identifies the intended model directly. That makes part selection more straightforward when servicing an existing build rather than replacing larger assemblies unnecessarily. As a single-purpose spare part, it suits bench work that focuses on keeping the drivetrain operating cleanly and consistently. In a workshop setting, the joint can be fitted during routine overhaul after extended running or when a damaged coupling starts to affect smooth rotation. It also works as a practical stock spare for model owners who maintain a CC-01 Pajero 58132 and want the correct replacement ready for the next service interval. Warning! Not suitable for children under 14 years.
Axes & drive shafts
CC-02 SS Adjust Tie-Rod Set, chassis accessory
300054929€23.99
The CC-02 SS Adjust Tie-Rod Set adds a more tunable steering linkage to compatible CC-02 chassis cars by replacing the standard rigid molded link with stainless steel turnbuckle shafts. That change brings toe angle adjustment into the setup, allowing the chassis to be dialed in with greater precision for different running conditions and handling preferences. The set includes 1 x 104 mm stainless steel tie-rod, 1 x 53 mm stainless steel tie-rod, adjusters, and small attachment parts. The turnbuckle shafts feature hex adjustment sections, so length can be changed with a wrench as shown in the set documentation. This mechanism makes it possible to alter the linkage length directly through the shaft rather than removing and replacing a fixed rod. Stainless steel construction gives the main rods a durable metal format suited to repeated setup changes on the chassis. Installed in place of the standard kit linkage, the set supports fine setup work when steering response needs a more exact toe setting than the stock molded part allows. It suits bench tuning, rebuilds, and upgrade work on CC-02 based builds where adjustable linkage geometry is part of the chassis setup. Warning! Not suitable for children under 14 years.
Axes & drive shafts
Cup Joint Universal Shaft for TT-01 DF-02
300053790€21.29
This Cup Joint Universal Shaft is a drivetrain spare part for TT-01 and DF-02 chassis setups, built to work at the gearbox in combination with an assembly cardan shaft. The pot joint design is intended to suppress drive losses, supporting smoother running when the drivetrain is under power. The set contains a left and a right part, giving the specified pair needed for the matching drivetrain layout. Its application is clearly defined for use with the DF-02 Assembly Universal Shaft 53791 or the Assembly Universal Shaft for TT-01 and TA04 53792. That makes it a focused choice for maintenance, replacement, or a driveline setup built around those universal shaft systems. The compact metal parts are shaped for precise fit within the transmission area, where clean engagement matters for consistent rotation. On the bench, this kind of component belongs in rebuilds, wear-part replacement, or a planned drivetrain update on compatible chassis. In running use, the gearbox connection and universal shaft pairing support a more fluid transfer of drive through the system, especially where a correctly matched left and right set is required. Warning! Not suitable for children under 14 years.
Axes & drive shafts
D-Parts F/R Upright, model spare part, 1 pc.
300005296€14.49
D-Parts F/R Upright is a model spare part for selected Tamiya vehicle builds and is supplied as 1 piece. The molded black component is shaped for front and rear upright use, making it a practical choice when an original part from a compatible chassis setup needs replacement during maintenance or repair. The part is specified for compatibility with 58321, 58232 and 58256. Its form combines mirrored upright sections with circular housings, angled support arms, fastening holes and molded connection points in a single unit. That layout matters during repair work because the geometry of an upright part affects how surrounding running gear components line up and mount. Replacing a worn or damaged section with the correct designated part helps restore the intended fit within the assembly area. This spare part suits workshop stock for ongoing model upkeep, rebuilds after heavy running, or the completion of an older chassis that needs the original designated component. Kept alongside other maintenance parts, it supports faster repairs when a compatible model returns to the bench for service or parts replacement.
Axes & drive shafts
DB-01 Fluorine Coated Suspension Balls, RC parts
300053709€16.79
DB-01 Fluorine Coated Suspens. Balls(8) is a suspension hardware set for RC chassis tuning and maintenance. The fluorine coating reduces friction between each suspension ball and its mount, which supports more fluid suspension movement when the chassis changes direction, settles into corners or reacts to surface input. The scope of delivery contains 8 balls for wishbone shafts, making this set suitable for replacing worn contact points with matching hardware across the suspension assembly. Compatibility reaches across several Tamiya chassis families: TA06, TA06 PRO, TA06 MS, TB-03 VDS and TA05 ver.II use these balls with 54064-54074 and 54171-54175. FF-03, FF-03 PRO, TB-03, TB-04 and TB-04 PRO use them with 54064 to 54074. M-07 CONCEPT and M-08 CONCEPT use them with 54760, while TC-01 uses them with 54760 and 54787. This suspension set suits regular workshop servicing, chassis refreshes and targeted setup work where smooth ball-to-mount movement matters. It also fits neatly into a spares box for track days or bench maintenance, with 8 matching pieces ready for the specified chassis applications. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DF-02 B-Parts Upright/Steering Arm Spare Set
300051076€14.29
DF-02 B-Parts Upright/Steering Arm is a chassis spare set for the DF-02 and TT-02B platform, built to restore key steering and wheel support points with matching replacement components. The black molded parts are arranged as 4 sprues with 20 pieces, making this set a practical choice when worn or damaged suspension and steering sections need to be renewed. The upright and steering arm shapes handle pivot and linkage mounting duties within the front end layout, while the mirrored forms support correct left and right installation. Multiple mounting holes are formed into the parts for chassis attachment and linkage connection. The set also includes 4 wheel nuts and 8 washers, adding the fastening hardware needed for the relevant assemblies. As a dedicated spare set, it suits routine maintenance, repair work after running sessions, or keeping workshop stock ready for future rebuilds. On the bench, the parts help bring a DF-02 or TT-02B chassis back into running condition with matching replacement geometry instead of mixed substitutes. For hobby maintenance, rebuild projects, or replacing damaged steering components after track use, this set keeps the fit focused on the specified chassis types. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DF-02 Drive Shaft Set, RC spare part, 64 mm
300051081€13.29
This DF-02 Drive Shaft set provides a direct spare part solution for the DF-02 chassis and includes 2 drive shafts with a stated length of 64 mm. The matching pair format suits maintenance work where both sides of the drivetrain need the same part specification, keeping the assembly consistent across the axle setup. Each shaft follows a straight cylindrical form with ball-shaped ends and cross pins for connection at the mounting points. That layout is designed for mechanical transfer within the drivetrain while matching the geometry required by the DF-02 platform. The black finish and compact rod profile make the parts easy to identify during a rebuild or parts check. As replacement components rather than a general accessory, these shafts are intended for the named chassis application instead of broad multi-model use. The set fits routine workshop tasks such as replacing worn transmission links during servicing, refreshing a stored chassis before running, or keeping matching spare parts ready for a future repair. In a bench setup focused on DF-02 maintenance, the 2 included shafts cover a complete paired change with the specified 64 mm dimension. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DF-02 E-Parts, spare parts set, wheel axle
309005756€9.79
The DF-02 E-Parts set provides replacement components for the wheel axle and differential joint area, giving compatible model maintenance a direct route to restoring key drivetrain connections. Black moulded parts are supplied on sprues, with the axle-related and joint-related sections grouped for clear identification before removal and fitting. This spare parts set is designated as E Parts for 58328 and is intended for focused servicing rather than broad replacement across unrelated assemblies. The visible component mix includes cylindrical axle-linked pieces, connector forms and longer structural elements that belong to the same parts tree. Keeping these pieces together on one runner helps confirm part shape and orientation during workshop preparation. The set format also suits repair benches where damaged drivetrain sections need matching replacement geometry from the original parts family. Used during maintenance, rebuilds or parts replacement after wear, the DF-02 E-Parts set supports continued running with the correct component group kept on hand. It fits naturally into a spares collection for model upkeep, especially when the axle and differential connection points need renewed parts to return a chassis to working order. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DF-02 Universal Shaft Assembly, RC drivetrain set
300053791€56.99
The DF-02 Universal Shaft Assembly is an RC drivetrain upgrade set built to cut friction where the axle moves through the steering angle. In place of a standard dog bone drive shaft, the universal joint layout keeps power delivery more direct while the front end changes direction, which helps the chassis carry drive more cleanly through bends and technical sections. The set contains 1 ball cardan shaft set with 13 pieces and is built around 2 universal shafts. Visible components include wheel axle parts, cross joints, pins, grubscrews, AW grease and a hex wrench for assembly. The shafts are marked 70, and the document notes grease application at multiple moving contact points in the joint and cup areas. The assembly is designed to be taken apart again, which allows consumable parts to be replaced when wear appears instead of discarding the full shaft unit. Fitment is specified for DF-02, DT-02, DT-03, DT-03T and TT-02B chassis with the matching cup joints listed in the data. On a buggy set up for repeated steering input, jumps and direction changes, this drivetrain layout supports a more consistent feel at the driven axle and gives maintenance-focused builders a clear upgrade path within compatible Tamiya chassis. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DF-03 C-Parts Front Upright Steering Arm Set
300051250€9.59
The DF-03 C-Parts Front Upright Steering Arm Set is a dedicated spare parts pack for the DF-03 chassis and focuses on the front steering area where precise component fit is essential. Supplied as 1 C parts tree with 6 parts, the set groups the matching pieces in one place for straightforward identification during maintenance, repair or a planned rebuild. The included components are shaped for the front upright and steering arm section, with mirrored larger pieces and smaller connecting elements that suit the geometry of this chassis area. That layout helps when replacing worn or damaged parts while keeping the original mounting positions and linkage arrangement consistent. The black and dark gray moulded finish also makes the individual forms and mounting holes easy to distinguish on the bench during parts sorting and assembly checks. This set suits workshop stock for an existing DF-03 vehicle, whether the goal is to replace a single damaged section or refresh the front end during a broader service. In a hobby room or trackside pit setup, having the correct C-Parts sprue ready can shorten downtime and keep a DF-03 chassis prepared for the next running session. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DF-03 D-Parts Rear Upright Hub Carrier Set
300051251€9.59
The DF-03 D-Parts Rear Upright Hub Carrier set is a chassis-specific replacement set for the DF-03 platform, supplying the molded parts used in the rear upright and hub carrier area. With 1 D parts tree and 6 parts in the box, it gives the build a direct source for the designated components when maintenance, rebuild work or part replacement is due. The set is focused on one defined chassis section rather than a mixed hardware assortment, which keeps part selection clear during workshop use. The molded layout on the runner helps identify each piece before removal and fitting, especially when comparing worn parts against fresh replacements. Because the set is tied to the DF-03 chassis, it suits repairs that need the matching geometry and mounting form for that platform. The rear upright and hub carrier area plays a key role in how the corresponding rear assembly is put together, so using the intended parts helps restore the specified structure of that section. On the bench, this set fits naturally into routine servicing, rebuilds after heavy running, or a planned stock of spare chassis parts. It also works well as a replacement pack to keep alongside a DF-03 model, so the required rear section components are on hand when a damaged part needs to be exchanged. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DF-03Ra Assembly Universal Shaft RC Parts Set
300053792€35.49
The DF-03Ra Assembly Universal Shaft brings a serviceable drivetrain upgrade to compatible RC chassis, combining a ball cardan shaft layout with high-precision machining that reduces the stalling feel during steering and supports smoother cornering. In the workshop or at the track, the metal shaft parts, pins and couplers form a focused tuning set for driveline maintenance and response. The scope of delivery contains 1 ball cardan shaft set with 13 pieces. Visible set contents include 2 long shafts marked 39, joint hardware, pins, set screws, an L-shaped hex key and AW anti-wear grease for the moving contact points. The PTO shaft can be assembled and disassembled, which allows worn consumable parts to be exchanged instead of replacing the whole assembly. That serviceable layout helps keep the driveline working with the same intended action over repeated running sessions. Compatibility is specified for TT-02 chassis, TT-02D chassis, TT-02FT chassis, TT-01 TYPE-E chassis and TT-01D TYPE-E chassis when combined with the listed companion parts. This makes the set suited to targeted repair work, drivetrain upkeep and handling-focused tuning where steering load and cornering smoothness matter most. Warning! Not suitable for children under 14 years.
Axes & drive shafts
Drive Shaft, RC spare part, steel, 45 mm
309805551€12.99
This RC spare part supplies 2 steel drive shafts at 45 mm length for model vehicle drivetrains that use ball differential drives. The shaft format matches Manta Ray and Fire Dragon applications named in the data, giving a direct way to replace worn drivetrain links while keeping the intended mechanical layout in place. Each shaft uses a long steel rod with formed ends that sit into the drivetrain connection points, where rotation is passed through the linked assemblies. The 45 mm measurement matters in this role because shaft length determines how the connected parts line up during running. With 2 identical pieces in the pack, both sides can be fitted with the same specification instead of mixing different lengths or constructions. The part is listed for bowling and ball differential drives, so the stated drivetrain type stays clear when selecting the replacement. This kind of spare part suits repair work, routine maintenance and the refresh of an older chassis that needs the original shaft format restored. It can also be paired with the matching ball cardan shafts named in the data when a compatible drivetrain setup is being completed with related components.
Axes & drive shafts
Drive Shaft, spare part set for 58087 model
309805370€13.99
This spare part set provides 2 drive shafts for model 58087 and focuses on one clear job: replacing the matching drivetrain components with the correct designated parts. The shafts shown combine a long metal rod with white end connectors and protruding metal pins, giving the assembly the connection points needed for the intended mounting position. As a dedicated replacement set, the value lies in fit and function for the specified model rather than in generic compatibility. The 2-piece format suits repairs where both corresponding shafts are changed together, and it also supports planned maintenance when worn drivetrain parts need renewal. The metal rod section forms the main shaft body, while the molded end pieces create the shaped interfaces required by the assembly. This keeps the repair focused on the exact component group named in the set. On the workbench, these drive shafts suit routine servicing, rebuilds after wear, or the completion of an unfinished model that is missing original running parts. For collectors and builders maintaining model 58087, the set supplies the exact replacement category needed for a clean, model-specific repair. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DT-02/03 Upright L/R, RC spare part set
300555059€10.19
The DT-02/03 Upright L/R is a dedicated RC spare part set for restoring the front end of compatible chassis builds. Supplied as left and right uprights, the set replaces the side-specific mounting pieces that support wheel assembly and connected steering or suspension movement during running. Its value lies in precise fitment for the DT-02 and DT-03 platform family, where a damaged upright can affect alignment and interrupt smooth operation. Replacing the affected parts with the correct upright pair helps bring the chassis back to its intended layout without changing unrelated assemblies. The compact parts format also suits the usual maintenance cycle of hobby-grade RC vehicles, where individual wear points are renewed as needed rather than swapping complete sections. For bench work, the set is easy to sort, store and match to the relevant repair task because the application is clearly defined in the designation. This spare part set fits naturally into routine buggy upkeep after repeated use, contact with track barriers or general wear in the front corner area. It also serves as a practical stock part in a workshop drawer, ready for scheduled maintenance or a direct replacement when a DT-02 or DT-03 chassis needs the correct upright on each side. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DT-04 B Parts Uprights, chassis spare parts
300051755€8.99
The DT-04 B Parts Uprights set brings together molded replacement components for the new DT-04 chassis, making it easier to restore worn mounting points or replace damaged running gear with matching parts. Black resin pieces for the front and rear sections keep the fit aligned with the original chassis layout, whether the workbench task is a targeted repair or a broader rebuild. Beyond the uprights, the set covers several key connection areas of the chassis. C-hubs support the front end structure, while damper stays provide the shock mounting sections used in the suspension setup. The steering linkage transfers servo movement through the steering assembly, and the servo horn forms the connection point between servo output and linkage movement. Hex hubs complete the wheel mounting area, so the set reaches across several mechanical zones instead of covering only one isolated part. This parts group suits maintenance sessions after heavy running, rebuilds of a used chassis, or keeping workshop stock ready for future repairs. It also helps when a fresh DT-04 build needs replacement pieces on hand for the steering, suspension and hub areas most likely to see regular service. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DT-04 Freewheel Axles Long, RC spare part
300022095€6.49
DT-04 Freewheel Axles Long is a dedicated RC spare part for compatible Tamiya model assemblies. The long axle format supports accurate replacement where the running gear requires this specific version, and the metal construction matches the technical character expected from a drivetrain hardware component. The visible design combines a threaded section, a smooth cylindrical shaft and a locking element, indicating a part made to seat mechanically in a defined mounting point rather than a general-purpose fastener. That combination matters during maintenance because the thread handles fastening while the shaft section aligns the part in use. The long specification distinguishes it from shorter axle variants and helps maintain the intended geometry of the matching DT-04 setup. As a single-purpose replacement component, it belongs in repair stock for existing builds that need the correct axle pattern rather than an improvised substitute. In workshop use, this kind of spare part supports routine servicing after wear, loss or damage to original hardware. It also fits planned rebuilds where a compatible chassis is being refreshed with the correct replacement parts, keeping the assembly focused on proper fit and function. Warning! Not suitable for children under 14 years.
Axes & drive shafts
F103 Turnbuckle Tie Rod Set, RC spare parts
300053150€14.99
The F103 Turnbuckle Tie Rod Set brings adjustable linkage hardware to the F103GT chassis in a compact 20-piece spare parts pack. At the center are 2 turnbuckle shafts in 3 x 42 mm size, built to create a tunable connection within the steering or rod linkage layout. A reverse screw on 1 side of each shaft allows the rod length to be changed by turning the shaft itself, which helps when alignment needs fine correction during maintenance or reassembly. Alongside the shafts, the set provides 6 adjusters and 4 cushion balls in 5 mm size, plus the related small hardware for mounting and connection. This combination supports the pivoting and threaded joints used in RC chassis linkages, where clean fit and measured adjustment matter more than fixed-length parts. The included parts are suited to replacing worn linkage components or restoring a chassis with matching hardware dimensions already specified in the set. On the bench, the set fits naturally into steering service, linkage renewal or a parts refresh for an F103GT build. The compact format also makes it useful to keep with workshop spares, so the required rods, adjusters and joint hardware are ready when a setup change or replacement is needed. Warning! Not suitable for children under 14 years.
Axes & drive shafts
F104/F103 Special King Pin, model spare part
300053119€4.49
The F104/F103 Special King Pin is a dedicated spare part for compatible F104 and F103 chassis, intended for maintenance, repair and ongoing setup work. As a king pin, it belongs to the front suspension area where precise alignment between steering and suspension components matters during rebuilds and replacement work. This part is supplied for the F104/F103 platform rather than as a generic hardware piece, which helps keep servicing focused on the correct chassis family. It suits replacing a worn or damaged king pin during routine maintenance, or keeping a matching spare ready in workshop storage for future repairs. The compact format also fits neatly into parts boxes and bench organisers used for model upkeep, making it easier to separate chassis-specific hardware from general screws and fittings. On the workbench, the part supports clean, direct replacement when a front-end rebuild is needed after running sessions or inspection. It also fits tuning and restoration tasks where the original suspension layout of an F104 or F103 chassis needs the correct replacement component rather than an improvised substitute. Warning! Not suitable for children under 14 years.
Axes & drive shafts
F104/W/F103 Front Support Arm, Carbon Part
300054153€9.19
This carbon-reinforced front support arm is specified for F104, F104W and F103 chassis applications and serves the front support area where an exact replacement part keeps a model's structure consistent. The dedicated fit makes it a practical choice when an existing arm shows wear, damage or loss during maintenance. Used in the front section of compatible chassis, the part supports orderly repairs and helps keep a build aligned with the original F104/W/F103 layout. The carbon-reinforced construction is the key material detail stated for this component, giving the part its defined specification within the range. Its naming also makes workshop identification more direct when several chassis families and spare parts are stored together. As a model supply rather than a complete kit, it is aimed at repair, upkeep and parts replacement on existing compatible cars. On the bench, this type of spare part fits naturally into rebuild sessions, front-end servicing and pre-run checks on F104, F104W or F103 models. It also works well as a stocked replacement for hobby rooms, pit boxes and parts drawers where the correct chassis-specific component saves time during ongoing maintenance. Warning! Not suitable for children under 14 years.
Axes & drive shafts
Front Upright Set, model spare parts, MB10/11
319808262€18.49
This front upright set supplies 2 matching metal parts for MB10/11, with left and right versions shaped as a mirrored pair for front-end replacement work. The silver finish and compact machined form give each piece a clean mechanical look, while the curved arm and pivot section point to a defined mounting role within the assembly. Each upright shows a circular attachment hole at one end and a rounded housing at the other, creating the connection points needed for a controlled mechanical fit. A vertical cylindrical shaft extends from each part and ends in a threaded screw tip, adding a fastening detail that supports installation into the intended front assembly position. One housing appears to carry internal threading, indicating that the two sides are not interchangeable and are made for their specific left or right placement. This set suits repair, maintenance or parts replacement on a compatible MB10/11 model where worn or missing front hardware needs a like-for-like component shape. Kept as workshop spares or fitted during a rebuild, the pair provides the dedicated geometry needed for accurate front-end restoration. Warning! Not suitable for children under 14 years.
Axes & drive shafts
Front Upright Set, RC spare part for Tamiya chassis
300051352€6.19
This front upright set supplies 2 steering knuckles for the front axle of compatible RC chassis, giving the steering assembly the exact mirrored left and right parts needed for repair or routine maintenance. The shape with circular axle openings and multiple mounting points supports correct integration into the front suspension area, where precise alignment matters for wheel guidance and steering movement. The set is listed for a wide range of chassis platforms: FF-04 EVO, FF-03, FF-03 PRO, TA07 MS, TA07 PRO, TA06 MS, TA06, TA06 PRO, TA05 Ver. II, TB-Evo.6 MS, TB-Evo.6, TB-05 PRO, TB-04, TB-04 PRO, TB-03, TB-03 VDS and TT-02 TYPE-S. That broad compatibility makes this pair useful for keeping several touring car and front-wheel-drive builds in running condition with one clearly matched spare. The scope of delivery contains 2 front steering knuckles from C-Parts TB-03. In workshop use, this pair suits worn, damaged or missing front uprights on supported chassis and helps return the front end to its intended mounting layout. It also serves as a practical stock spare for regular service between driving sessions, especially on platforms that share steering and suspension hardware. Warning! Not suitable for children under 14 years.
Axes & drive shafts
Gear Box Joint, replacement part for 43520
309804237€8.99
The Gear Box Joint set for 43520 supplies 2 matching replacement parts for a drivetrain connection point where accurate fit matters. The machined metal finish and compact cylindrical form suit technical model maintenance, helping restore a clean mechanical link in the gearbox area when an original joint is worn, damaged or missing. Each joint is shaped as a dedicated spare for use with model number 43520 rather than as a generic workshop component. The 2-piece format provides a matched pair for repair planning and parts storage, which is useful when both sides of a mechanism need the same connection standard. The metal construction supports a precise seating surface at the contact point, which matters in assemblies where connected parts need to meet cleanly. As a small drivetrain component, this set fits naturally into regular service work on running models and mechanical rebuilds. On the workbench, the pair can be kept ready for scheduled maintenance or used to replace a failed connection during a repair session. For model builders who maintain existing vehicles over time, dedicated spare parts like these help keep compatible assemblies operating with the intended hardware. Warning! Not suitable for children under 14 years.
Axes & drive shafts
GF-01 Full Ball Bearing Set, chassis accessory
300054924€39.99
The GF-01 Full Ball Bearing Set is a chassis accessory made to give GF-01 models a complete bearing upgrade with the exact quantities needed in one pack. The set contains 24 x 1150 ball bearings and 2 x 850 ball bearings, replacing the standard bearing arrangement at the rotating points across the chassis. By swapping in ball bearings for the kit standard plastic and metal bearings, the running gear can turn with less drag and a more consistent mechanical feel. The different bearing sizes cover the positions required by the GF-01 layout, so the set is built around the chassis rather than a generic assortment of parts. The compact metal components suit maintenance work, rebuilds and planned performance upgrades where efficient rotation matters. On the bench, the set supports a straightforward refresh of a used GF-01 runner or a more refined specification for a fresh chassis build. Once fitted, the smoother movement through the rotating assemblies helps the model make cleaner use of its available power during regular driving sessions.
Axes & drive shafts
Left Upright Front, RC spare part with ball stud
300445169€6.99
This front left upright is a dedicated spare part for the Stadium Blitzer and is intended to restore a specific suspension or steering connection point in the front corner assembly. The molded piece combines a compact arm shape with a central round mounting hole, creating the defined pivot location needed for the surrounding mechanism to sit correctly. A brass-colored ball stud at one end adds the articulated connection point for the linked assembly. The upright also carries a silver metal shaft with a threaded tip, which provides the fastening point for installation into the matching front section. Reinforced ribs in the molded body support the shape of the part around the mounting area, while the white finish makes the component easy to identify during maintenance or parts sorting. Supplied as 1 piece, it is specified as the front left version rather than a universal side-to-side replacement. This kind of spare part suits focused repairs after wear, damage or a missing original component in the Stadium Blitzer. Kept in a workshop drawer or parts box, it supports routine maintenance and helps return the front assembly to its intended mechanical layout with the correct left-side geometry. Warning! Not suitable for children under 14 years.
Axes & drive shafts
M-03 Assembly Universal Shaft, RC spare part set
300053597€51.99
The M-03 Assembly Universal Shaft set brings a serviceable drivetrain upgrade to compatible Tamiya chassis with 2 cardan shafts supplied as 15-piece assemblies. Each shaft is built to be assembled and disassembled, giving direct access to the joint parts during installation, cleaning or routine running maintenance. This set is specified for the M-03 chassis and also fits M-05, M-05 PRO, M-05 ver.II PRO, M-06, M-06 PRO and MF-01X chassis. The interchangeable references 53499, 53500, 53681 and 54410 make it easier to match an existing parts list when refreshing a drivetrain or replacing earlier shaft sets. For MF-01X chassis, the data notes combined use with 54000. The included layout shown for the set covers the shaft components, small hardware and assembly tool needed for the 2 shaft builds. In workshop use, the take-apart construction supports regular inspection of the moving joint sections after repeated running sessions. During a rebuild of an M-chassis touring car, the set gives a clear route to replacing worn drivetrain parts while keeping compatibility across several related platforms. Warning! Not suitable for children under 14 years.
Axes & drive shafts
M-05 C-Parts, suspension spare parts set
300051391€17.49
The M-05 C-Parts suspension spare parts set supplies the designated C section for several compact Tamiya chassis, making it a practical choice when suspension-related components need replacement during maintenance or repair. With 46 pieces on 1 parts tree, the set groups matching molded sections together for rebuild work on compatible RC car platforms. Compatibility covers M-06, M-06 PRO, M-05 ver.Ⅱ PRO, M-05, M-05 PRO and MF-01X chassis. That broad fit makes this set useful for workshops, spare parts storage and ongoing running repairs across more than one chassis type. The molded parts format also helps identify and separate the required sections before installation, which keeps rebuild work organized when replacing worn or damaged areas. Scope of delivery: 1x C parts, 46 pieces. This spare parts set suits routine servicing after track use, collision damage or part loss during disassembly. It also fits planned refresh work on an existing chassis, where keeping the correct designated section on hand can shorten downtime between maintenance sessions. Warning! Not suitable for children under 14 years.
Axes & drive shafts
M-05 F-Teile, spare parts set, wheel hub
300051393€9.39
The M-05 F-Teile set is a dedicated spare parts pack for compatible Tamiya chassis, supplying 12 replacement components for maintenance on running gear assemblies. The set is intended for M-06, M-06 PRO, M-05 ver.II PRO, M-05 and M-05 PRO chassis, making it a practical match when original parts need replacement after regular use. The included F parts are shown as black moulded resin components with multiple mounting holes, pivot points and axle or bearing openings shaped for their specific positions in the assembly. Left and right mirrored forms support correct placement during rebuilds, while the mix of upright, hub and small insert style pieces helps address wear in connected front-end areas. This kind of chassis-specific parts pack is useful when keeping an existing RC car in running condition rather than replacing a full assembly. On the bench, the set suits routine servicing, repair after contact damage, or preparation of a second chassis for use with the same platform family. It also helps maintain parts support across several related M chassis versions, which is useful for hobby setups that rotate between M-05 and M-06 based builds. Warning! Not suitable for children under 14 years.
Axes & drive shafts
M-05Ra F-Parts, RC chassis parts set
300051425€9.99
The M-05Ra F-Parts set is a dedicated RC chassis parts set for the M-05 RA chassis, centered on the upright front and rear area. With 21 pieces in 1 F-parts frame, it provides the specific molded shapes needed when a suspension or steering section has to be rebuilt with matching left and right components. The set contains black molded parts with multiple mounting holes, cylindrical pivot sections and forked connection points. These details matter during assembly because they define how links, axles and adjacent hardware sit in the chassis. The layout shown for the parts also includes small spacers, washers and connector plates, which support alignment and spacing in the assembled upright section. Rather than replacing unrelated sections, this set addresses one clearly defined area of the M-05 RA platform. That focused fitment suits maintenance after heavy running, accident damage or a full chassis refresh. It also helps when keeping a build consistent with the original M-05 RA configuration, using parts intended for that exact platform. The scope of delivery contains 1x F parts set with 21 pieces. Warning! Not suitable for children under 14 years.
Axes & drive shafts
MB-01 C-Parts Transmission Spare Parts Set
300051721€7.19
The MB-01 C-Parts Transmission set supplies replacement drivetrain parts for the MB-01 chassis, centering on the transmission area where matched fit matters most. Black molded components and metal shaft sections form a compact service set for restoring the original mechanical layout with the specified C-parts. Included are differential cup joints, axle shafts, dogbone shafts and propeller shafts, grouped for transmission-related maintenance on the MB-01 platform. The forked cup pieces and connecting shafts handle the mechanical link between rotating drivetrain sections, while the smaller spacers and retaining hardware shown in the set support correct assembly of the replacement parts. This makes the set useful when worn or damaged transmission components need to be exchanged with the designated matching parts rather than improvised substitutes. On the workbench, the set supports targeted repair of an MB-01 drivetrain without changing to a different chassis standard. It suits routine maintenance, rebuilds after heavy running, or keeping spare transmission components ready for the next service interval on an MB-01 model.
Axes & drive shafts
MB-01 M-Parts, chassis spare parts sprue
300051724€5.39
The MB-01 M-Parts sprue brings together several of the chassis pieces that matter most when an MB-01 build needs replacement hardware rather than a full new kit. This set is centered on the MB-01 platform and groups key black molded parts on one sprue, making it a practical match for repair work, routine maintenance, or keeping workshop stock ready for the next rebuild. Alongside suspension arms, the sprue also carries body mounts, a bumper and damper shafts, covering parts that sit across the running gear and upper mounting structure. That mix is useful when wear or impact affects more than one area at once, because the set addresses several connected mounting points in a single purchase. The molded layout also helps identify each piece before removal from the sprue, which keeps preparation straightforward at the bench. As a chassis parts set rather than a complete vehicle, it focuses on restoring original MB-01 component positions and connections. On the workbench, this sprue suits planned servicing as well as targeted replacement after track contact or repeated running sessions. It can be kept as a ready spare for an existing MB-01 chassis or used when a rebuild calls for fresh molded components in the suspension and body support areas.
Axes & drive shafts
Shaft 2 x 9.8 mm, model spare part, 10 pcs
309805776€3.99
This spare shaft set brings exact replacement dimensions to model maintenance with 10 steel shafts measuring 2 x 9.8 mm. The compact format suits small mechanical assemblies where a worn, bent or missing shaft can affect how connected parts sit and move. The 2 mm diameter and 9.8 mm length give a clear reference for matching an existing part before installation. As a workshop consumable, the set supports repeated servicing across compatible hobby models instead of relying on a single replacement piece. The short shaft format is suited to detail areas where space is limited and clean alignment matters. Keeping identical spares on hand can simplify routine upkeep when several connection points use the same measurement. In a home workshop, club pit area or model bench, this shaft pack fits neatly into regular maintenance supplies for ongoing repair work. It also serves as a practical stock addition when checking assemblies, replacing lost hardware or preparing compatible builds for the next running session. Warning! Not suitable for children under 14 years.
Axes & drive shafts
Stadium Blitzer Right Upright, spare part
300445207€6.99
The Stadium Blitzer Right Upright is a dedicated front replacement part for the model named in the data, built to restore the specific right-side mounting point in the front assembly. Its compact form combines a moulded white body with a metal shaft and a ball stud, giving the part the hard connection surfaces needed where linked components pivot and attach. The geometry shown for this upright focuses on mechanical fit rather than decoration. A circular mounting hole, a short threaded tip and the ball joint connection provide the key interfaces for installation into the surrounding front-end hardware. The part is supplied as 1 front right upright, which keeps the replacement focused on the exact side named in the specification. That makes it useful when wear, damage or loss affects one defined point in the assembly instead of a wider section. In workshop use, this kind of spare helps return a model to running condition by replacing the named upright with the same designated component type. It also suits parts storage for existing Stadium Blitzer maintenance, where keeping the correct front right spare on hand can shorten downtime between repair and the next run Warning! Not suitable for children under 14 years.
Axes & drive shafts
TA-01/02/FF-01 C-Parts, rear upright spare set
310005377€12.79
The TA-01/02/FF-01 C-Parts rear upright set is a chassis-specific spare for compatible Tamiya models, supplying the moulded parts needed in the rear upright area on a single black sprue. For repair, maintenance or a careful rebuild, the matched layout keeps related pieces together and ready for selection at the bench. The injection-moulded frame holds several components in their original positions until removal, which helps preserve part identification during preparation and fitting. Mirrored shapes for left and right assembly can be checked before cutting from the runner, reducing mix-ups when replacing worn or damaged suspension-side parts. The sprue format also supports clean storage between repair sessions, since unused pieces remain attached and easier to track than loose small parts. Visible moulded markings on the runner further reflect its role as a functional service part for model maintenance. This spare set fits situations where a compatible chassis needs renewed rear upright components after use, damage or a missing part in a long-running build. It also suits keeping a dedicated replacement sprue on hand for workshop stock, so servicing can stay focused on the exact chassis section rather than replacing unrelated assemblies.
Axes & drive shafts
TA-01/02/TB-01/02/TG Wheel Axle Set, RC spare part
300050808€12.79
This RC spare part set supplies 2 metal wheel axles for compatible TA-01/02, TB-01/02 and TG chassis, giving a direct replacement option where a 39 mm axle is specified. The machined shape combines a threaded end, a cross-hole and a slotted coupling section, so the part matches the connection points used in these model vehicle platforms. The 39 mm format is the key reference for installation planning and parts matching. The pair layout supports side-to-side replacement with matching hardware rather than mixing old and new axle parts. The metal construction shown in the data suits a mechanical role where rotation, fastening and drivetrain connection meet in one compact component. Because the set is defined for TA-01/02, TB-01/02 and TG chassis, the copy stays focused on those stated applications only. In workshop use, this axle set suits routine maintenance, repair after wear, or restoring a compatible chassis to running condition with the specified part format. The 2-piece scope of delivery keeps the contents clear for parts drawers, bench stock and planned service work on supported RC models. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TA-01/DF-01 Upright (2), RC spare part, black
300445572€8.69
TA-01/DF-01 Upright (2) is a black RC spare part set for compatible TA-01 and DF-01 chassis builds, supplying 2 mirrored uprights on a single molded sprue for direct replacement work. The paired form supports left and right side installation, making it easier to restore the original mounting layout when an existing part is worn, cracked or missing. Each upright is injection-molded and shaped with cylindrical mounting sections, angled arms and reinforcing ribs that support the part where screws or pins pass through the fixing points. The molded geometry is designed for chassis assemblies that rely on precise alignment between connected components, so replacement with the correct upright helps maintain clean mechanical fit. The central sprue keeps both matching pieces together until installation and helps identify the set as one complete replacement pair. This spare part suits workshop use during routine maintenance, rebuilds after running wear, or parts-box preparation for TA-01 and DF-01 platforms. Kept on hand with other service components, the 2-piece set supports faster repairs when suspension or wheel-mount areas need attention. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TA-02/CC-01/FF-01 Front Upright Pair, RC Spare Part
300050705€7.29
This spare part set is made for TA-02, CC-01 and FF-01 chassis and supplies 2 black front uprights for the steering end of the front axle. The mirrored left and right layout supports a matched fit during repair work and helps restore the intended geometry at the front wheel mounting points. Each upright is moulded with a circular hub opening, fastening holes and a reinforced arm section that connects into the surrounding steering hardware. The ribbed structure adds material where the shape changes direction, while the drilled connection points support accurate screw-based installation with the corresponding chassis parts. As a dedicated replacement part, the set focuses on the front upright area rather than a universal fit across unrelated platforms. The pair suits routine maintenance, rebuilds after wear, or the completion of an older TA-02, CC-01 or FF-01 chassis project. In workshop use, the 2-piece set makes it possible to replace both front sides together and keep the steering assembly consistent across the axle. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TA-02/FF-01 Front Upright, spare part, blue
300445246€8.69
The TA-02/FF-01 Front Upright blue set supplies 2 replacement uprights for compatible front-end assemblies. Each part is formed as a mirrored counterpart, so the left and right sides can be positioned correctly when restoring the steering or suspension layout on a TA-02 or FF-01 chassis. The shape combines a large cylindrical hub section with a smaller upper mounting point and a flat arm with a fastening hole. Reinforcing ribs add structure to the moulded form, and the visible metal insert at the upper mount provides a ready fixing point within the assembly. The blue colour helps separate this pair from other small chassis parts during sorting, servicing and rebuild work. As a dedicated spare part, this set is intended for precise replacement rather than general-purpose adaptation. The 2-piece format suits routine maintenance, repair of worn front components or keeping matching replacements on hand for workshop use. In a build area or pit box, the mirrored pair can be checked against the existing front assembly before fitting, helping keep the chassis layout consistent on both sides. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TA-04/TA-05 King Pin Set, RC spare part, 4-piece
300050882€3.69
The TA-04/TA-05 King Pin Set supplies 4 shaft screws for steering knuckle use, giving RC model maintenance a precise replacement set for a small but essential chassis connection. The metal screw format combines a cylindrical head, a smooth shoulder section and a threaded end, matching the kind of hardware used where controlled movement and secure fastening need to work together. This set is listed for TA-04 and TA-05 and is also specified for DF-03, M-06, M-06 PRO, M-05 ver.II PRO, M-05, M-05 PRO and MF-01X chassis. That broad compatibility helps when servicing several platforms from the same workshop stock. With 4 matching pieces in the pack, each screw shares the same form for consistent replacement across the intended mounting points. As a dedicated spare part rather than a generic fastener, the set is aimed at repair, upkeep and parts renewal on named chassis families. In workshop use, the screws can be kept with chassis-specific spares for routine rebuilds, steering knuckle service or the replacement of lost hardware after track sessions. The compact 4-piece format also suits tackle boxes and bench drawers where clearly assigned replacement parts save time during maintenance. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TA-05IFS D-Parts, RC chassis suspension arms
300051297€10.99
TA-05IFS D-Parts is an RC chassis spare parts set with 4 molded suspension arms arranged as 2 front and 2 rear pieces. The wishbone-style shape, mounting holes and central attachment points support correct installation on compatible touring car platforms and restore the intended suspension layout after wear or impact damage. The scope of delivery contains 1x D parts tree with 4 parts. These black molded components are intended for replacement and maintenance work rather than universal use, so the value lies in exact fit across the listed chassis families. Compatibility covers FF-03, FF-03 PRO, TA06 MS, TA06, TA06 PRO, TA05 ver.II, TB-Evo.7, TB-Evo.6 MS, TB-Evo.6, TB-05 PRO, TB-04, TB-04 PRO, TB-03, TB-03 VDS, TRF419XR, TRF419X, TRF419, TT-02 TYPE-SR and TT-02 TYPE-S. That broad fit list makes the set useful in a spares box for racers and builders maintaining more than one platform. During workshop servicing, replacement arms like these help return free suspension travel and proper linkage alignment on the compatible chassis. They also suit planned rebuilds where fresh running gear parts are fitted before the next track session. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TA02 D-Parts Suspension Arms, RC spare parts
310555091€18.79
TA02 D-Parts Suspension Arms bring core running gear pieces together in one replacement set for RC chassis maintenance. The black molded sprues show mirrored suspension components, linkage-style parts and smaller inserts, giving a clear starting point when worn or broken originals need to be swapped out. The sprue layout keeps related shapes organised before removal, which helps when matching left and right side parts during a repair. Large A-arm style pieces sit alongside long narrow bars with multiple mounting points, plus smaller lever-like forms and circular bush-style elements. This mix supports detailed work on suspension-related areas rather than general cosmetic changes. The molded numbering on the runners also helps identify individual sections during parts preparation and fitment. On the bench, this set suits routine chassis upkeep, restoration of older TA02-based builds and replacement after hard running sessions. It also works as a practical spare to keep in a workshop drawer, ready for rebuilds that call for original-style suspension hardware and linked structural pieces.
Axes & drive shafts
TA08 A Parts Steering Arm Pully RC Spare Set
310015144€14.49
TA08 A Parts Steering Arm Pully 58693 is a replacement parts sprue for RC model maintenance, centred on steering arm and pulley components that restore key chassis functions on the intended TA08 build. The black moulded frame presents the parts in a clearly organised layout, with each piece held in place until needed at the workbench. The runner carries a mix of larger structural shapes and smaller fitting pieces, including arm forms, ring elements and compact mounting details that belong together within the same assembly area. Moulded reference marks with the letter A and numbers 1 through 14 are visible on the sprue, giving a direct visual guide when matching each section to the required build step or service task. This format helps separate similar-looking pieces before cutting and supports a tidier repair process when a worn section needs replacement rather than a full rebuild. On a maintenance bench, the grouped layout makes it easier to prepare the required sections before installation and keep unused pieces together until later service work. For ongoing chassis care, a dedicated replacement frame like this helps return the matching model to proper mechanical condition with the correct part shapes kept in one set.
Axes & drive shafts
TA08 D Parts Suspension Arms for TA08 Chassis
300051669€13.49
TA08 D Parts suspension arms are replacement chassis components for TA08 cars, supplied as 2 parts for maintenance when existing arms are worn. The set focuses on a key suspension area, making it useful for restoring the chassis with matching parts intended for the named platform. The molded parts shown in the set use a mirrored left and right layout, with multiple pivot points and mounting positions formed into each arm. This geometry matters in an RC chassis because the suspension arms connect the wheel assembly to the main structure and guide movement through compression and rebound. Metal-lined pivot holes are visible in the image, adding defined contact points where the parts mount into the suspension system. The black finish keeps the look consistent with typical chassis hardware and makes the parts easy to integrate into an existing TA08 build. These parts suit routine workshop maintenance, rebuilds after heavy running, or a fresh chassis refresh before the next session. In a repair setup, the 2-piece format supports replacing worn arm sections as a matched pair so the suspension layout stays even across the car.