Model TS spray paint
Model TS spray paints for vibrant, durable paintwork: ideal for precise, even colour results and a long-lasting surface coating!
TS spray colours
TS-13 Clear Gloss 100 ml, paint spray, clear coat
300085013€10.491 l = €104.90
TS-13 Clear Gloss is a 100 ml clear coat spray for model finishing, designed to add a transparent gloss layer over painted surfaces while leaving the underlying colour visible. The aerosol format supports fast, even coverage across larger sections such as bodyshells, body panels and other exterior parts where a uniform sheen matters. The formula is identified in the supplied data as a special acrylic resin spray, and the can is marked for plastics, making it suitable for plastic model work. Applied in light coats, the clear layer helps bring separate painted sections into a more consistent overall finish and can visually unify decals and colour areas under one glossy surface. The spray can format also suits broad curves and recessed shapes that are slower to cover with a brush. REACH declaration data states that this version does not contain substances of very high concern above 0.1% according to the ECHA Candidate List. For model builders working on car bodies, fairings or other display surfaces, TS-13 Clear Gloss adds the final reflective layer that completes the painted look. The can should be shaken vigorously before use and sprayed in a well-ventilated area, with attention to the hazard guidance shown for flammability and irritation. Warning! Not suitable for children under 14 years.
TS spray colours
TS-80 Flat Clear, paint spray, 100 ml lacquer
300085080€11.491 l = €114.90
TS-80 Flat Clear is a 100 ml spray lacquer for model finishing, designed to cover larger surfaces quickly and leave a flat final look over glossy paint finishes. The aerosol format suits broad body panels and shell sections where an even coat matters, and the synthetic lacquer cures in a short period of time to keep paint work progressing between stages. This spray is part of the TS paint range and is intended for model use where a smooth clear coat is needed across full surfaces rather than small brush-painted areas. One can is enough to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a useful guide when planning a full shell finish or multiple smaller projects. The formula is not affected by acrylic or enamel paints, so once the main painted assembly is complete, further detail work can be added with those paint types. For clear coating, the underlying paint should be fully cured before TS-80 is applied; the guidance given is up to 1 week to avoid cracking caused by different cure rates. Clear coating over decals should also be tested first, as some decals can be harmed by the coat. On the bench, TS-80 suits full-body finishing, panel-by-panel top coating and final surface adjustment when a glossy base needs a flatter appearance. In model car work, it gives a straightforward way to unify the finish across larger exterior areas before smaller painted details are picked out separately. Warning! Not suitable for children under 14 years.
TS spray colours
TS-26 White Gloss, spray paint, 100 ml aerosol
300085026€10.491 l = €104.90
TS-26 White Gloss brings a bright solid tone and a reflective finish to model painting, with a 100 ml aerosol format that suits broad, even coverage on plastic parts. The spray can layout supports fast colour application across body sections and shaped components where a brush can leave visible stroke patterns. The can is identified as a special acrylic resin spray within the TS paint range, giving model makers a dedicated finishing option for hobby work. Visible use guidance on the can recommends shaking vigorously and applying light coats from 25 to 30 cm, a method that helps the paint build up in controlled layers rather than flooding fine contours. The gloss white shade works well where a clean, high-contrast surface is needed for racing liveries, civil vehicle finishes or custom colour schemes. The 100 ml fill also gives enough material for repeated passes across larger shells, wings or body panels in one painting session. On the bench, the aerosol format fits projects that move from primed parts to final colour with minimal interruption. It can be used when separate model sections need a uniform white coat before decals, trim painting or display finishing, keeping the overall look crisp and consistent across matched parts. Warning! Not suitable for children under 14 years.
TS spray colours
TS-14 Black Gloss, spray paint, 100 ml
300085014€10.491 l = €104.90
TS-14 Black Gloss is a 100 ml spray paint for model finishing, combining a deep black tone with a gloss surface that suits body shells, exterior panels and other visible parts. The aerosol format covers wider areas quickly, making it useful when a model needs an even sprayed coat rather than brush marks. This TS paint is described as a special acrylic resin spray and is presented for plastic model use. Light coats can be built up across curved sections, edges and recessed areas, which helps keep the finish visually consistent on shaped parts. The can label identifies it as TS-14 and marks the net volume as 100 ml. The safety data for this aerosol classifies it as an extremely flammable aerosol under pressure, with storage and handling precautions that belong to workshop use. The same documentation also identifies the mixture as containing binders, pigments and solvents in a pressurised can. On the bench, this kind of spray paint fits body preparation, colour coating and final exterior finishing on scale builds where a gloss black surface is part of the look. It can be used when separate parts need the same colour match across the model, or when larger plastic sections call for a sprayed finish with steady visual coverage. Warning! Not suitable for children under 14 years.
TS spray colours
TS-29 Semi Gloss Black, spray paint, 100 ml
300085029€10.491 l = €104.90
TS-29 Semi Gloss Black brings a controlled black finish to model work with a 100 ml aerosol can and a semi gloss surface effect that sits between flat and full gloss. The special acrylic resin formula is made for plastics, making it a practical choice for colouring body parts, panels and other compatible model sections where an even sprayed coat matters. The aerosol format changes how the paint reaches the surface: instead of loading a brush, the colour is sprayed across wider areas in a continuous mist, which helps keep the finish more uniform on broad panels and curved shapes. Semi Gloss Black suits builds that need a darker tone with a slight sheen rather than a fully reflective look. The can is part of the TS paint range, a line used for model finishing where colour accuracy and surface appearance shape the final look of the build. The 100 ml net volume also gives useful capacity for larger shells or several smaller parts within one project. On the bench, TS-29 fits body painting, panel work and colour matching across separate components in the same build. It also works well when a project calls for black trim, darker accent sections or a consistent repaint of replacement parts on compatible plastic models. Warning! Not suitable for children under 14 years.
TS spray colours
TS-17 Aluminum Silver Gloss, spray paint, 100 ml
300085017€10.491 l = €104.90
TS-17 Aluminum Silver Gloss is a 100 ml spray paint for model finishing, built to cover larger surfaces quickly with a bright metallic silver tone and a gloss sheen. The aerosol format helps lay colour across body shells, fairings and shaped parts in smooth passes, creating an even look on broad panels and tighter contours alike. This TS colour belongs to the special acrylic resin spray range and is intended for plastic model work. The aluminum silver shade suits full-body colour coats as well as accent areas where a reflective metal effect is needed. On car bodies, aircraft sections or mechanical details, the gloss finish gives edges and panel shapes stronger definition under light. The spray format also helps reach vents, recesses and curved mouldings that are slower to cover with a brush. For hobby benches that handle multiple subassemblies, the 100 ml can offers enough paint for repeated finishing sessions across several parts. Used for scale models, custom bodies or detail refresh work, TS-17 fits projects that call for a clean metallic surface rather than a flat coat. Light, even passes support controlled coverage on spoilers, cowls, fuselage sections and armour panels. This makes the shade a practical choice when a build needs a crisp silver finish with the speed and reach of aerosol application. Warning! Not suitable for children under 14 years.
TS spray colours
TS-8 Italian Red Gloss, spray paint, 100 ml
300085008€10.491 l = €104.90
TS-8 Italian Red Gloss brings a vivid gloss red finish to plastic model surfaces in a 100 ml spray format that covers broad exterior areas quickly and evenly. The special acrylic resin paint is designed for model work, making it a practical choice for body shells, fairings, panels and other visible outer parts where a smooth colour coat shapes the final look. The aerosol format changes how the paint is applied: light passes from the can lay colour across curves, edges and larger sections without the brush marks that can interrupt a uniform surface. The label identifies this as paint for plastics, so it fits projects built around plastic model components rather than general household use. As part of the TS spray range, the shade name TS-8 Italian Red Gloss gives a clear match point when planning a specific colour scheme or replacing a previous can in an ongoing build. On the bench, the 100 ml volume suits full-body colour work as well as refresh coats on selected sections. The gloss finish works especially well on racing, road or custom subjects where a strong red surface and clean reflections help the painted parts read clearly once decals and final details are added. Warning! Not suitable for children under 14 years.
TS spray colours
TS-38 Gun Metal Semi Gloss, spray paint, 100 ml
300085038€10.491 l = €104.90
TS-38 Gun Metal Semi Gloss is a 100 ml spray paint for model building, supplied in an aerosol can for direct application to plastic parts. The Gun Metal tone combines a metallic grey look with a semi gloss finish, making it useful for body sections, trim pieces and mechanical areas that benefit from a darker sprayed color with a subtle sheen. The TS paint format is suited to covering broader surfaces quickly, especially where curved shells, panel shapes or recessed details are harder to finish evenly with a brush. The aerosol spray lays down color across larger sections in one continuous pass, which helps keep the finish visually consistent on scale model components. For builds that call for more shine, the color coat can be followed with TS-13 glossy clear coat. This adds a glossier top layer while keeping the underlying TS-38 shade in place. On a car bodyshell, aircraft section or other plastic model assembly, the Gun Metal shade works well for contrast areas, technical details and darker accent zones. The 100 ml can size fits neatly into hobby bench use, whether the goal is a full exterior coat or selected sprayed sections that need a metallic grey finish. Warning! Not suitable for children under 14 years.
TS spray colours
TS-4 German-Grey Flat, spray paint, 100 ml
300085004€10.491 l = €104.90
TS-4 German-Grey Flat is a 100 ml spray paint from the TS range, made for plastic model finishing with a muted grey tone and an even aerosol application. The flat surface works especially well where a low-sheen look suits the subject, from military equipment to mechanical details and scale body sections. The paint is identified in the range as TS-4 and belongs to the Spezial-Acryl-Harz-Spray line. Its aerosol can format is designed for broad, consistent coverage on exterior surfaces, making it useful for body panels, housings and shaped parts that benefit from a uniform coat. The 100 ml fill gives enough material for repeated light passes across larger areas while keeping the colour tone consistent from section to section. The German-Grey shade lends itself to subdued finishes, technical components and painted assemblies where a glossy effect would not match the intended look. On the workbench, the spray format helps move quickly from prepared parts to full-colour coverage on plastic assemblies and accessories. It fits painting sessions focused on shells, structural sections or detail groups that need the same flat grey across multiple pieces. Warning! Not suitable for children under 14 years.
TS spray colours
TS-50 Mica Blue Spray Paint, model paint, 100 ml
300085050€10.491 l = €104.90
TS-50 Mica Blue Spray Paint brings a metallic blue tone to model work in a 100 ml aerosol can, combining quick coverage with a semi gloss finish that suits broad body panels and shaped parts. The spray format helps distribute colour in a fine mist, making it easier to cover contours, edges and recessed sections with a more uniform coat than hand brushing. The paint is specified for plastics, which makes it relevant for many model shells and accessory parts used in hobby building. The mica effect gives the blue shade extra visual depth as light moves across the painted surface, so curved fenders, rooflines and body sides show more variation than a flat solid colour. The can label identifies it as a spray paint for adult modelers only, and the aerosol format is paired with handling guidance such as vigorous shaking and application in light coats. The 100 ml fill size also gives enough material for repeated passes across larger sections where a single heavy coat would be less controlled. For finishing work, TS-13 glossy clear coat can be used over TS-50 when a higher-shine result is wanted. That makes the paint useful for model car bodies, exterior panels and other plastic parts where colour consistency and surface character matter in the final presentation. In a workshop setup, the can suits staged painting sessions with drying time between coats and a final clear layer when a brighter gloss is the goal. Warning! Not suitable for children under 14 years.
TS spray colours
TS-30 Metallic Silver Gloss, spray paint, 100 ml
300085030€10.491 l = €104.90
TS-30 Metallic Silver Gloss is a spray paint for model finishing that combines a metallic silver tone with a gloss surface in a 100 ml aerosol format. The special acrylic resin spray is intended for model work, where broad panels, curved sections and shaped parts benefit from an even coat laid down by a fine spray rather than a brush. The can is marked for plastics, making it suitable for compatible plastic model parts that need a uniform metallic appearance. Aerosol application helps cover contours, edges and recessed areas with the same colour character, which is especially useful when a build includes multiple connected surfaces. The metallic silver shade works well wherever a bright machined look, body colour accent or reflective trim effect is wanted on scale subjects. The gloss finish also gives decals and further detailing a clean painted base once the coat has cured. On the workbench, TS-30 suits body panels, fairings, exterior parts and other prepared components that call for a sprayed finish instead of hand brushing. The 100 ml can size fits both single-colour touchups and broader coverage across larger model sections. Use only with the handling care required for an aerosol paint. Warning! Not suitable for children under 14 years.
TS spray colours
TS-61 NATO Green Flat, spray paint, 100 ml
300085061€10.491 l = €104.90
TS-61 NATO Green Flat is a 100 ml spray paint for model finishing, supplied in a ready-to-use aerosol can for broad, even coverage on plastic parts. The flat NATO Green tone gives military subjects and other subdued paint schemes a matte surface that reduces visible brush streaks and helps large areas read as one consistent color. This TS paint belongs to the special acrylic resin spray range for model use. The aerosol format is especially useful on body shells, hull sections, armor panels and other shaped components where a brush can leave overlaps at edges and corners. A sprayed coat can settle more evenly across recessed lines, raised details and curved surfaces, which helps preserve the look of molded structure after painting. The 100 ml volume also gives enough material for repeated finishing sessions or for covering multiple assemblies, depending on the size of the parts being painted. On the workbench, the can suits builders who want a fast route to a uniform base color before adding markings, weathering or detail accents. It also fits restoration or touch-up work on existing model projects where a flat military green shade needs to match the rest of the finish. Warning! Not suitable for children under 14 years.
TS spray colours
TS-95 Pure Metallic Red, paint spray, gloss 100 ml
300085095€11.491 l = €114.90
TS-95 Pure Metallic Red is a gloss spray paint for model finishing, supplied in a 100 ml aerosol can and formulated as a synthetic lacquer. The fast-curing formula suits larger model surfaces where an even metallic coat matters, such as car bodies, fairings and broad exterior panels that benefit from a smooth sprayed finish. The colour is identified as Pure Metallic Red, giving bodywork a bright metallic tone that catches light across curves, edges and recessed lines. Because the TS spray formula is not affected by acrylic or enamel paints, the main colour coat can be followed with hand-painted detail work in other paint types once the larger surfaces are covered. That makes it useful for separating the main body colour from smaller trim areas, vents, frames or accent sections without changing the base finish. The aerosol format also helps distribute paint evenly across wide sections that are harder to cover with a brush. On a workbench, one can is enough to fully cover 2 to 3 car model bodies in 1/24 scale, which gives a clear reference point for planning multi-body projects or repeat colour use on matching builds. The spray format suits full-body coating first, followed by detail painting once the main shell has cured, keeping the finishing process focused and orderly. Warning! Not suitable for children under 14 years.
TS spray colours
TS-21 Gold Gloss, spray paint, 100 ml aerosol
300085021€10.491 l = €104.90
TS-21 Gold Gloss is a 100 ml spray paint aerosol for model finishing, supplied in a ready-to-use can that applies colour by fine spray across plastic parts. The gloss gold tone suits builds that need a bright metallic surface, whether the aim is a full body colour, accent sections or selected trim areas that stand out under a clear, reflective finish. The paint is identified as a special acrylic resin spray within the TS range, giving model makers a clearly coded colour reference for repeat use on matching parts or later touch-ups. The aerosol format helps cover broad shells, panels and exterior sections more quickly than brush application, especially where an even coat matters across curved surfaces. The can is marked for plastics, which keeps material choice clear when planning a finishing sequence for model kits and separate body components. Visible hazard labelling and handling information on the can underline that this is a workshop material intended for careful hobby use. On the bench, TS-21 fits naturally into painting sessions for scale bodies, accessories and detail sections that call for a metallic gold effect. It works well when a build moves from surface preparation to colour coating, with the 100 ml can size offering enough paint for repeated passes on larger model parts or several smaller sections. Warning! Not suitable for children under 14 years.
TS spray colours
TS-45 Pearl White Gloss, spray paint, 100 ml
300085045€10.491 l = €104.90
TS-45 Pearl White Gloss is a 100 ml TS paint spray made for finishing plastic model surfaces with a bright gloss coat and a pearl effect that catches light across curves, edges and larger exterior sections. The aerosol format suits broad coverage on body shells and other outer parts where an even colour layer matters to the final look. This paint belongs to the TS spray range and is identified as a special acrylic resin spray in the supplied safety data. The can is intended for model painting rather than general household use, and the label states for adult modelers only. Pearl white works especially well on shaped panels where the finish can show subtle changes in tone as light moves across the surface. For the stated colour result, Tamiya recommends using TS-26 Glossy White as the primer beneath TS-45, giving the top coat a lighter base to build on. On the bench, TS-45 suits car bodies, cowlings and other plastic parts that benefit from a smooth sprayed finish instead of hand-painted coverage. Light coats on prepared surfaces help build the final appearance step by step, whether the goal is a clean road-car body, a race livery base or a bright custom colour scheme. Warning! Not suitable for children under 14 years.
TS spray colours
TS-79 Semi Gloss Clear, paint spray, 100 ml
300085079€11.491 l = €114.90
TS-79 Semi Gloss Clear is a 100 ml paint spray for model finishing, designed to give larger surfaces a semi gloss clear coat with the speed and coverage of a synthetic lacquer aerosol. The fast-curing formula helps move a build from colour work to final surface treatment without a long wait between stages. This spray is especially useful on broad model areas where a brush can leave visible overlap, such as car bodies, fairings and other shell sections. The semi gloss finish sits between flat and full gloss, making it suitable for builds that need a softer final sheen rather than a high-shine coat. A 100 ml can provides enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a concrete guide for planning workshop stock and multi-build sessions. The formula also supports layered finishing, because enamel and acrylic paints can be added after the overall coating stage for smaller details and accents. On the bench, TS-79 works well as the clear stage after the main colour has been completed and dried. It suits modelers who want consistent coverage across larger panels, then return with finer brush-painted details to complete trim, markings or small visual contrasts. Warning! Not suitable for children under 14 years.
TS spray colours
TS-33 Flat Hull-Red, spray paint, 100 ml
300085033€10.491 l = €104.90
TS-33 Flat Hull-Red is a 100 ml spray paint for plastic model parts, built around a special acrylic resin formula and delivered through an aerosol can for broad, even coverage. The flat color finish suits subjects that call for a muted surface rather than shine, whether the goal is a ship hull tone, structural detailing or a weathered painted section on a scale build. The aerosol format helps lay color across larger panels and shaped parts with a steady spray pattern, which is useful on curved shells, molded recesses and edges that are slower to cover by hand. The can is labeled for plastics, making it a focused choice for model kit finishing rather than a general household coating. The TS-33 designation also helps match the shade within an established hobby paint range when a build calls for a specific color reference. As an aerosol paint, the can is classified as extremely flammable and pressurized, and it should be used only with careful handling and good ventilation. On the bench, this spray suits primed assemblies, separate body sections and detail groups that need an even flat red-brown tone across multiple parts. It also works well when a build calls for quick, consistent color application before further detailing, masking or weathering steps are added. Warning! Not suitable for children under 14 years.
TS spray colours
TS-40 Metallic Black, spray paint, 100 ml
300085040€10.491 l = €104.90
TS-40 Metallic Black brings a dark metallic tone to plastic model surfaces with a semi gloss finish that gives panels and shaped parts a clean, light-catching look. The aerosol format lays colour across broad areas quickly, making it well suited to body shells, exterior panels and other model sections where an even coat matters. This spray paint comes in a 100 ml can and is part of the TS paint range for plastic models. The Metallic Black shade combines a black base with a metallic effect, which helps edges, curves and moulded lines stand out under changing light. On larger surfaces, the spray pattern supports more consistent coverage than hand brushing, especially where recessed contours or rounded forms make brush marks harder to avoid. The semi gloss surface sits between flat and high gloss, giving the finish visible depth without a mirror-like shine. When a brighter final sheen is required, TS-13 glossy clear coat can be applied over the colour layer. In model building sessions, this shade suits vehicle bodies, fairings and accessory parts that call for a darker metallic appearance. It also works well when a build needs contrast between painted exterior sections and smaller detail areas, while the can format keeps application straightforward across repeated coats. Warning! Not suitable for children under 14 years.
TS spray colours
TS-42 Light Gun Metal, spray paint, semi gloss
300085042€10.491 l = €104.90
TS-42 Light Gun Metal is a special acrylic resin spray paint for model finishing, supplied in a 100 ml aerosol can. The semi gloss Light Gun Metal shade gives plastic model surfaces a metallic look with a controlled sheen that avoids the fully flat or mirror-gloss appearance often used for different effects. The aerosol format helps lay down colour across wider panels and shaped exterior sections in a continuous coat, which is useful on body shells, fairings, covers and other visible parts where an even surface matters. As part of the TS paint range, this shade is suited to model painting tasks that call for a darker metallic tone. The can is labelled for plastics, aligning it with common model-building materials used in hobby kits. When a brighter top finish is wanted, the BasicText specifies TS-13 glossy clear coat as the matching overcoat for a glossy surface finish. On the bench, TS-42 fits projects where metallic bodywork, trim sections or equipment housings need a darker gun metal appearance. It also works well in finishing stages where a spray-applied coat is preferred over brush application for smoother coverage across larger visible areas. Warning! Not suitable for children under 14 years.
TS spray colours
TS-6 Flat Black, spray paint, 100 ml aerosol
300085006€10.491 l = €104.90
TS-6 Flat Black is a 100 ml spray paint for model finishing, supplied in an aerosol can and identified as a special acrylic resin spray. The flat black colour gives plastic model parts a non-gloss surface that suits body sections, panels and detail areas where a muted finish is the goal. The can is labelled for plastics, making it a clear fit for hobby work on compatible model surfaces. As an aerosol, it covers broad areas faster than hand painting and reaches curved shapes with an even mist when applied in controlled passes. The visible handling guidance points to a simple working method: shake the can vigorously, spray in light coats and allow drying between passes. Clearing the nozzle after use helps keep the spray pattern ready for the next session. The 100 ml fill offers enough paint for repeated workshop use across multiple stages of a build or refinishing job. On the bench, TS-6 Flat Black suits body preparation, colour blocking and final surface work on plastic model assemblies. It also fits touch-up tasks where a flat black section needs to match surrounding painted parts with the same low-sheen look. Warning! Not suitable for children under 14 years.
TS spray colours
TS-63 NATO Black Flat, spray paint, 100 ml
300085063€10.491 l = €104.90
TS-63 NATO Black Flat is a 100 ml spray paint for model finishing, supplied in an aerosol can and identified as part of the TS paint range. The flat black tone suits subdued colour layouts, dark trim sections and military-style paint schemes where a non-gloss surface is needed across larger areas. The formula is described in the product data as a special acrylic resin spray with pigments and solvents in a pressurised can. That aerosol delivery helps lay colour across wide panels, body sections and separate parts with a more uniform coat than hand brushing on the same surfaces. The can is intended for plastics, making it suitable for plastic model components where an even overall colour is the goal. The 100 ml fill offers enough paint for repeated passes on multipart builds, touch-up work on matching sections, or a full colour stage within a larger finishing plan. On the bench, TS-63 can be used for exterior body pieces, armour panels, accessories and other model parts that call for a flat black accent or base tone. It fits builders planning camouflage layouts, dark underlayers or restrained contrast details, and the spray format keeps the painting step focused on coverage, tone consistency and a clean matte look. Warning! Not suitable for children under 14 years.
TS spray colours
TS-48 Gunship Grey Flat, spray paint, 100 ml
300085048€10.491 l = €104.90
TS-48 Gunship Grey Flat is a 100 ml spray paint for model finishing, supplied in an aerosol can for broad, even coverage across larger sections and shaped parts. The Gunship Grey tone and flat finish suit subjects that call for a muted surface, from aircraft panels to military equipment details and mechanical bodywork. This special acrylic resin spray is intended for plastics and gives builders a practical way to cover surfaces that are slower to finish with a brush. The aerosol mist helps reach curves, edges and recessed shaping with a more consistent coat across the same section. The can is labelled TS-48 within the TS paint range, making the shade easy to match when a build calls for a specific colour reference. Hazard pictograms on the can identify it as a flammable aerosol and indicate careful handling during use and storage. On the bench, the 100 ml volume suits repeated work across multiple assemblies, touch-ups on larger model sections, or a full colour stage on a single build. It fits naturally into painting sessions focused on armour, aircraft, sci-fi subjects or utility vehicles where a flat grey finish supports realistic surface character. Warning! Not suitable for children under 14 years.
TS spray colours
TS-76 Mica Silver, spray paint, 100 ml gloss
300085076€11.491 l = €114.90
TS-76 Mica Silver is a spray paint for model finishing that combines a metallic silver tone with a gloss surface and the fast-curing behaviour of synthetic lacquer. The aerosol format helps cover broad body panels evenly, making it especially useful when a build calls for a uniform coat across larger exterior surfaces. Each can contains 100 ml of paint, and the stated coverage is enough to fully coat 2 to 3 car model bodies in 1/24 scale. That quantity gives clear planning for repeat colour work across more than one shell or for keeping the same finish available for a second body. The paint system also supports layered detailing after the main colour is down. Acrylic and enamel paints can be applied for smaller accents and picked-out sections because they do not affect the TS spray coat. On a car model body, the metallic tone settles best when broad areas such as the roof, bonnet and side sections need a consistent finish. For builders aiming at a higher-shine result, the data recommends TS-13 glossy clear coat as the next step for an even glossier surface. Warning! Not suitable for children under 14 years.
TS spray colours
TS-86 Brilliant Red, paint spray, 100 ml
300085086€11.491 l = €114.90
TS-86 Brilliant Red is a 100 ml paint spray for model finishing, built around a synthetic lacquer formula that cures in a short time and helps cover larger surfaces with an even colour coat. The bright red shade suits full body shells, broad panels and other parts where a smooth, continuous finish gives the model a clean overall look. The aerosol format is especially useful when a brush would slow down coverage across wide sections. One can contains enough paint to fully cover 2 or 3 car model bodies in 1:24 scale, giving a clear guide for planning a complete paint job. After the main coat has been applied, enamel and acrylic paints can be used for smaller details and picked-out sections because the spray layer is not affected by those paint types. That makes it easier to separate the main body colour from trim lines, lights, frames or other fine accents added later. On the bench, TS-86 Brilliant Red supports a straightforward workflow: broad areas first, then detail painting once the main surface has cured. It fits model projects that need a strong solid red finish across exterior shells, whether the goal is a clean road-car look or a vivid racing style.
TS spray colours
TS-2 Dark Green Flat, spray paint, 100 ml
300085002€10.491 l = €104.90
TS-2 Dark Green Flat is a 100 ml spray paint for plastic model surfaces, combining a deep muted green tone with the quick, even application of an aerosol can. On larger shells, body panels or grouped parts, the flat finish reduces shine and gives painted sections a more scale-like appearance under workshop light. This colour belongs to the TS range of special acrylic resin sprays used in model finishing. The spray format helps cover broad areas more uniformly than hand brushing, which is especially useful on curved panels, body shells and repeated parts that need the same tone across the whole build. The dark green shade suits military subjects, utility vehicles and classic colour layouts where a matte surface supports the visual character of the model. The 100 ml fill offers a practical amount for planned paint sessions on plastic components. On the bench, the can suits builders preparing exterior parts before decals and final detailing, or refreshing a single body section in the same colour family. In hobby use focused on plastic kits and RC bodyshells, TS-2 Dark Green Flat adds a controlled sprayed coat that keeps the finish understated while letting panel lines and shapes remain clear. Warning! Not suitable for children under 14 years.
TS spray colours
TS-34 Camel Yellow Gloss, spray paint, 100 ml
300085034€10.491 l = €104.90
TS-34 Camel Yellow Gloss is a 100 ml aerosol spray paint for plastic models, built for fast, even colour application on larger surfaces and shaped parts. The gloss yellow shade gives body panels, fairings and exterior sections a bright, solid finish that reads cleanly on display models and working RC builds alike. This TS paint is described as a special acrylic resin spray, combining pigments, binders and solvents in a pressurised can for direct spray use. The can is intended for plastic model work, where broad coverage matters more than brush marks or uneven edges. Applied in light coats from about 25 to 30 cm, the spray pattern helps colour reach curves, corners and recessed sections with a more consistent layer build. The 100 ml fill suits full-body coverage as well as smaller repaint jobs and matching detail sections across a build. On the bench, TS-34 Camel Yellow Gloss fits projects that need a strong yellow body colour, a contrasting accent area or a fresh repaint on worn exterior parts. It works well when several plastic components need the same tone across the whole model, keeping the finish visually coherent from the first pass to the final dried coat. Warning! Not suitable for children under 14 years.
TS spray colours
TS-41 Coral Blue Gloss, spray paint, 100 ml
300085041€10.491 l = €104.90
TS-41 Coral Blue Gloss is a 100 ml spray paint from the TS range, made for model finishing with a bright gloss colour that reads between coral blue and light turquoise on the cap and can marking. The aerosol format lays colour across larger surfaces quickly, which suits body panels, shells and other shaped parts where an even visual flow matters. The paint is identified in the range as TS-41 and belongs to the acrylic resin spray line shown in the safety data sheet as Spezial-Acryl-Harz-Spray TS-Farben. As a ready-to-spray can, it removes the need to decant or mix colour before use and helps keep coverage consistent across repeated passes on matching parts. The gloss finish gives edges, curves and raised details a cleaner light catch than a flat coat, which can make panel lines and colour blocking read more clearly on completed models. The 100 ml fill also gives enough material for multi-part painting sessions or for carrying the same shade across several sections of one build. On a workbench, TS-41 suits full-colour body coverage, contrasting trim sections or standout accent areas that need a vivid gloss tone. The spray-can format also fits builders who want one coded shade ready for touch-ups, repeat projects or coordinated finishing across separate model components. Warning! Not suitable for children under 14 years.
TS spray colours
TS-71 Smoke Transparent Gloss Spray Paint 100ml
300085071€10.491 l = €104.90
TS-71 Smoke Transparent Gloss is a spray paint for model finishing that combines a transparent smoke tone with a gloss surface, making it suited to tinted effects on clear parts and darker visual accents across larger assemblies. The synthetic lacquer formula cures in a short time, so broad surfaces can move on to the next stage without a long wait at the bench. The 100 ml aerosol format is designed for model work where an even coat matters across body shells and other wide sections. One can is stated to cover 2 or 3 car model bodies in 1:24 scale, which gives a practical guide when planning a full paint session. The paint is not affected by acrylic or enamel paints, so different paint types can be used in sequence on the same build. That makes it easier to add smaller colour areas, trim details or highlighted sections after the main smoke coat has been applied and dried. In use, TS-71 suits model car bodies, clear sections and other parts that benefit from a darker transparent finish with gloss depth. It fits neatly into finishing work where the main surface is sprayed first and finer accents are added later with a brush, helping keep large areas smooth while leaving room for precise detail painting. Warning! Not suitable for children under 14 years.
TS spray colours
TS-83 Metallic Silver Gloss, paint spray, 100 ml
300085083€24.991 l = €249.90
TS-83 Metallic Silver Gloss is a 100 ml paint spray for model finishing, formulated as a synthetic lacquer that cures in a short time and helps cover larger surfaces with a smooth metallic coat. On car bodies, broad fenders, roofs and doors can be coated in one consistent colour pass, giving the shell a clean gloss look that suits silver road cars, race liveries and custom builds. The spray format is especially useful when a brush would leave visible strokes across wide panels. One can is stated to fully cover 2 to 3 car model bodies in 1/24 scale, which gives a clear guide for planning full repaints or multiple shells in the same colour. After the main coat has dried, further detailing can be added with acrylic or enamel paints because the TS lacquer layer is not affected by them. That makes it easier to separate the main body colour from window trim, vents, grilles or other fine painted accents. When used for metallic silver or metallic gold finishes, a glossy black primer underneath is recommended to support the final visual depth of the colour. On the bench, the can suits full-body coating before smaller painted details are picked out by hand. It also fits repeat use across several 1/24 car projects where a consistent metallic silver gloss finish is needed. Warning! Not suitable for children under 14 years.
TS spray colours
TS-16 Yellow Gloss, spray paint, 100 ml
300085016€10.491 l = €104.90
TS-16 Yellow Gloss is a 100 ml spray paint for model finishing, supplied in an aerosol can and specified as a special acrylic resin spray. The gloss yellow colour is suited to broad exterior sections where an even coat and consistent surface appearance matter across the whole painted area. The formula is identified for plastics on the can, making it a practical choice for many model bodies and formed parts that benefit from spray application rather than brush painting. Aerosol delivery helps cover larger panels in a continuous pass, which is useful when matching colour across curved shells, body sides or other wide surfaces. The safety data identifies the contents as a pressurised aerosol mixture with binders, pigments and solvents in a propellant pack. The can carries flammable and irritant hazard warnings, and the documentation states storage below 50°C as well as use in well-ventilated areas. On the workbench, TS-16 Yellow Gloss fits painting sessions that focus on clean, full-surface colour application for scale models and hobby parts. It also works well when a bright gloss yellow tone is needed for body sections, accent panels or coordinated finishing across several compatible components. Warning! Not suitable for children under 14 years.
TS spray colours
TS-27 Flat White, spray paint, 100 ml aerosol
300085027€10.491 l = €104.90
TS-27 Flat White is a 100 ml spray paint designed for model finishing, combining a flat white tone with aerosol application for broad, even coverage on plastic surfaces. The special acrylic resin formula is made for hobby use, where smooth colour laydown across shaped parts, larger panels and curved sections helps keep the finish consistent. The can delivers paint as a fine spray rather than a brush-applied coat, which makes it useful for covering shells, body parts and other model components with fewer visible stroke marks. The Flat White shade works well where a matte white surface is needed for clean colour separation, solid coverage or a neutral base before further detailing. As an aerosol paint, it is classified as extremely flammable and as a pressurised container. Use only outdoors or in well-ventilated areas, avoid inhaling spray mist, and protect the can from heat and direct sunlight above 50°C. On the workbench, TS-27 suits builders finishing scale models, refreshing painted sections or preparing parts for additional masking and colour work. The 100 ml fill gives a practical amount for repeated hobby use across multiple painting sessions. Warning! Not suitable for children under 14 years.
TS spray colours
TS-3 Dark Yellow Flat, spray paint, 100 ml
300085003€10.491 l = €104.90
TS-3 Dark Yellow Flat is a 100 ml spray paint for model work that gives plastic surfaces a muted yellow-olive coat with a flat finish. The aerosol format suits broad body sections, curved panels and shaped parts where an even colour layer matters across the whole surface. This special acrylic resin spray is intended for plastics and is applied in light passes, with the can used at a recommended distance of 25 to 30 cm. The flat colour helps avoid a glossy look when a build calls for a subdued military, utility or worn appearance. The can is labelled for adult modelers only, and the paint sits in a pressurised aerosol format. The safety data identifies it as an extremely flammable aerosol, and the container must not be exposed to temperatures above 50°C. Use is stated for well ventilated areas. On the bench, TS-3 suits full body coverage, single-colour base coats and repaint work on plastic model parts. It also fits builds where a matte surface is needed before further finishing steps, letting colour placement stay consistent across larger sections and smaller formed details alike. Warning! Not suitable for children under 14 years.
TS spray colours
TS-46 Light Sand Flat Spray Paint, 100 ml Can
300085046€10.491 l = €104.90
TS-46 Light Sand Flat is a 100 ml acrylic resin spray paint for model finishing, combining a muted sand tone with the speed and reach of an aerosol can. The flat finish gives painted parts a dry, low-sheen surface that suits military subjects, desert vehicles and weathered details on larger sections where brush marks would interrupt the look. This TS paint is supplied as a ready-to-spray aerosol, so coverage is applied directly from the can rather than mixed for airbrush use. The safety data identifies it as an extremely flammable aerosol in a pressurised container, with hazard labelling for skin and eye irritation and for respiratory effects, so use belongs outdoors or in a well-ventilated area. The visible can format also keeps the colour code TS-46 easy to identify on the workbench when several shades are in rotation during a paint session. On armour builds, field equipment, scenery parts or body details, Light Sand Flat works where a subdued earth tone is needed across wider surfaces and repeated shapes. The 100 ml fill supports multiple passes on model components, touch-up stages between coats, or keeping one dedicated shade on hand for ongoing finishing work. Warning! Not suitable for children under 14 years.
TS spray colours
TS-53 Deep Metallic Blue, spray paint, 100 ml
300085053€10.491 l = €104.90
TS-53 Deep Metallic Blue brings a rich metallic blue tone to model painting in a 100 ml aerosol can, making it well suited to broad, even colour application on hobby surfaces. The semi gloss finish gives the colour a subtle sheen straight from the can, with metallic particles adding visible depth across curved panels and larger sections. This spray belongs to the TS paint range and is described as a special acrylic resin spray for model use. The aerosol format supports fast coverage on parts where brush marks would interrupt the finish, and it suits projects that need a consistent tone across multiple sections. For a glossier final appearance, TS-13 glossy clear coat can be used over the dried colour layer. The paint is supplied in a pressurised can, and the label identifies it as a flammable aerosol for adult modelers only. It fits naturally into body finishing, colour changes, and restoration work on hobby builds where a deep metallic blue is the target shade. Used in light coats across prepared surfaces, the spray can help create an even visual result on shells, panels, and other larger components that benefit from smooth colour coverage. Warning! Not suitable for children under 14 years.
TS spray colours
TS-62 NATO Brown Flat, spray paint, 100 ml
300085062€10.491 l = €104.90
TS-62 NATO Brown Flat is a 100 ml spray paint for model finishing, giving plastic surfaces a muted brown coat with the speed and reach of an aerosol can. The flat colour suits military subjects, field accessories and weathered details where a low-sheen surface helps preserve the scale look across broader areas. This TS series paint is described as a special acrylic resin spray, combining pigments, binder and propellant in a pressurised can for direct application. The aerosol format helps cover larger sections more evenly than hand brushing, which is useful on body shells, armour panels and terrain parts with repeated edges or recessed shapes. The colour reference TS-62 keeps the shade easy to match within a planned paint scheme or touch-up workflow. The can contains 100 ml net volume, giving enough material for multiple passes depending on the size and shape of the painted parts. Used on model kits and hobby components, the spray suits bench sessions where broad, consistent colour coverage matters as much as the final tone. For handling, the safety data states that the aerosol is extremely flammable, the container is pressurised and should not be exposed to temperatures above 50°C, so application belongs in well-ventilated work areas with careful storage between sessions. Warning! Not suitable for children under 14 years.
TS spray colours
TS-11 Maroon Gloss, spray paint, 100 ml
300085011€10.491 l = €104.90
TS-11 Maroon Gloss brings a deep maroon tone and a gloss surface to plastic model parts in a 100 ml spray can, making it well suited to larger exterior sections where an even finish matters. The aerosol format lays colour across broad areas in a continuous pass, creating a clean visual result on body shells, panels and other shaped surfaces. This special acrylic resin spray is specified for plastics and is intended for hobby finishing work rather than brush detail painting. The label guidance calls for light coats applied from 25 to 30 cm, a method that helps colour build gradually across contours and edges. Shaking the can vigorously before use supports an even mix in the spray. After painting, clearing the nozzle with a brief upside-down spray helps keep the can ready for the next session. The gloss maroon shade suits projects that call for a rich, polished body colour. On the bench, the can fits painting stages where separate parts are prepared, coated and left to dry between passes. Use in well ventilated areas is required, and the aerosol should be kept away from heat and open flames during handling and storage. Warning! Not suitable for children under 14 years.
TS spray colours
TS-19 Metallic Blue Spray Paint, Model Finish
300085019€10.491 l = €104.90
TS-19 Metallic Blue brings a metallic blue semi gloss finish to plastic model surfaces in a 100 ml aerosol format, giving shells, body panels and exterior parts a clean, even colour layer with the visual depth that metallic paint adds under light. The TS paint range is formulated as a special acrylic resin spray, making it suited to hobby finishing where smooth colour application matters across shaped surfaces. The aerosol can supports light, repeated passes over larger sections, which helps maintain a more uniform coat on curved panels, fairings and body contours. The metallic pigment gives the blue tone a brighter, reflective character than a flat colour, while the semi gloss finish keeps the surface short of a full high-shine look. For a glossier result, the product data recommends TS-13 glossy clear coat over the colour layer. The can is labelled for plastic model use and carries 100 ml net volume. This paint suits model car bodies, motorcycle fairings and other plastic kit parts that benefit from even spray coverage and a metallic finish. In a hobby workspace, it fits the stage where assembled or prepared parts move into colour finishing, whether covering a full bodyshell or refreshing selected exterior sections with a consistent blue tone. Warning! Not suitable for children under 14 years.
TS spray colours
TS-28 Olive Drab 2 Flat, spray paint, 100 ml
300085028€10.491 l = €104.90
TS-28 Olive Drab 2 Flat brings a muted military shade to plastic model work in a 100 ml aerosol can. The flat finish keeps reflections low, so vehicle panels, equipment parts and other surfaces read with a more scale-focused appearance once the paint has cured. This TS series spray is identified in the data as a special acrylic resin spray for plastics. The aerosol format helps lay colour across wider sections where a brush would leave visible stroke patterns, and it can be used on curved shells, flat armour plates or shaped exterior parts that need an even coat. Olive Drab 2 suits military vehicles, field accessories and subdued camouflage schemes where a non-gloss surface is part of the final look. The 100 ml fill gives useful capacity for multiple parts or a larger single build, depending on the size of the surfaces being painted. On the bench, the can supports quick colour application for body sections, exterior panels and detail groups that share the same shade. For hobby painting sessions, it fits naturally into projects that call for a uniform flat green tone across plastic components while keeping the finish visually restrained rather than shiny. Warning! Not suitable for children under 14 years.
TS spray colours
TS-44 Brillant Blue Gloss, spray paint, 100 ml
300085044€10.491 l = €104.90
TS-44 Brillant Blue Gloss brings a vivid blue gloss finish to plastic model surfaces in a 100 ml aerosol can. The ready-to-spray format suits larger sections where an even colour layer matters, such as bodyshells, fairings or broad exterior panels on scale builds. The TS paint range is described as a special acrylic resin spray, with pigments, binders and solvents in a pressurised can. That composition is built for direct spray application rather than brush work, making it useful when a project calls for continuous colour across curved or recessed shapes. The can is labelled for plastics, which makes it relevant for many model kits and RC bodyshell projects that use formed synthetic parts. The gloss finish adds a reflective surface character to the Brillant Blue shade instead of a flat or satin look. On the bench, TS-44 fits painting stages where a single, consistent colour coat defines the outer appearance of the build. The 100 ml fill gives practical volume for one or more model painting sessions, depending on the size and number of parts being coated. As an aerosol paint, it should be handled according to the stated precautions and used only outdoors or in well-ventilated areas. Warning! Not suitable for children under 14 years.
TS spray colours
TS-5 Olive Drab 1, spray paint, 100 ml
300085005€10.491 l = €104.90
TS-5 Olive Drab 1 is a 100 ml spray paint for model finishing, combining a flat surface effect with broad aerosol coverage for clean, even colour on plastic parts. The muted Olive Drab 1 shade suits military subjects and utility equipment, giving panels and shaped sections a restrained, non-gloss appearance that reads convincingly once the coat has settled. This TS paint is identified in the data as a special acrylic resin spray and is presented for plastics, making it a focused choice for model builders working on shells, bodywork, accessories or scenery parts. The aerosol format helps carry colour into recessed lines, curved edges and larger uninterrupted areas where brush marks can interrupt the finish. A 100 ml fill offers enough paint for repeated light coats across multiple sections of a build, which is useful when colour depth needs to be built gradually. The flat character of the finish also supports weathered, service-use or field-applied looks where a reflective surface would not fit the subject. On the bench, TS-5 Olive Drab 1 fits projects that need a uniform base coat before detail painting, decals or further finishing steps. It also works well when separate components such as fuel cans, stowage pieces or exterior panels need the same consistent tone across the whole build. Warning! Not suitable for children under 14 years.
TS spray colours
TS-84 Metallic Gold Gloss, spray paint, 100 ml
300085084€24.991 l = €249.90
TS-84 Metallic Gold Gloss is a spray paint for model finishing that combines a metallic gold tone with a glossy surface in a 100 ml aerosol can. The synthetic lacquer formula cures in a short time, which helps move larger painting stages along when body shells, panels or other broad parts need an even coat. The paint is described for large model surfaces, where a spray pattern can cover wide areas more efficiently than brush application. One can is stated as enough to fully cover 2 or 3 car model bodies in 1/24 scale, giving a concrete reference point for planning a full build or a repaint project. The formula is not affected by acrylic or enamel paints, so detail colours can be added after the main coat has been applied and cured. For work with TS-83 Metallic Silver and TS-84 Metallic Gold, the stated recommendation is a base of TS-14 Glossy Black primer. On the bench, this makes TS-84 a strong choice for full body painting, matching separate detail stages to a metallic main colour without changing paint systems mid-build. It suits car bodies, exterior panels and other larger parts where a uniform metallic gloss matters as much as colour depth. The 100 ml format also keeps the paint quantity clear when planning materials for one shell or several 1/24 scale bodies. Warning! Not suitable for children under 14 years.
TS spray colours
TS-87 Titanium Gold, paint spray, 100 ml
300085087€12.991 l = €129.90
TS-87 Titanium Gold is a 100 ml paint spray for model finishing, built around a synthetic lacquer formula that cures in a short time and helps lay down an even coat across broad surfaces. The metallic Titanium Gold tone gives body shells and larger panels a strong, clean colour presence that suits full exterior coverage rather than detail-only touchups. The spray format is especially useful when a build includes wide curved sections, long side panels or roof areas that benefit from a continuous coat. One can provides enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a practical reference point before starting a project. The lacquer layer also supports multi-stage finishing, because acrylic and enamel paints can be applied afterwards for smaller painted details. That makes it easier to separate the main body colour from trim, vents, frames or other picked-out sections once the larger surfaces are complete. On the bench, TS-87 suits full-body colour work on car models, custom repaint projects and refresh jobs on existing shells. It also fits display-focused builds where a metallic gold finish helps shaped lines and panel transitions stand out under room light or cabinet lighting. Warning! Not suitable for children under 14 years.
TS spray colours
TS-9 British-Green Gloss, spray paint, 100 ml
300085009€10.491 l = €104.90
TS-9 British-Green Gloss is a 100 ml spray paint for model finishing, combining a deep British-Green shade with a gloss surface that gives shells and parts a clean, uniform colour coat. The aerosol format helps lay colour across broader areas in a continuous pass, which is especially useful when a build calls for an even visual finish rather than visible brush marks. The paint is identified in the technical data as a special acrylic resin spray. That composition supports use in hobby painting where consistent surface coverage matters across shaped panels, edges and curved sections. The can is marked TS-9, so the colour stays easy to match within an established paint range when touch-ups or repeat builds are planned. The net content is 100 ml, a practical size for keeping a dedicated shade on hand for bodywork, accessories or other model parts that need the same gloss green tone. This spray suits finishing sessions at the workbench, whether the goal is coating a single body shell or adding a defined colour accent to selected sections of a model. Because it is an aerosol, painting should be carried out in well ventilated conditions with attention to the handling guidance on the can. Warning! Not suitable for children under 14 years.
TS spray colours
TS-1 Red Brown Flat, paint spray, 100 ml
300085001€10.491 l = €104.90
TS-1 Red Brown Flat is a 100 ml paint spray for model work that gives broad surfaces a smooth, even coat with a flat finish. The synthetic lacquer formula cures in a short time, which helps keep painting sessions moving when body shells, panels or other larger sections need full coverage in one colour. The spray format is especially useful on wide model surfaces where brush marks would interrupt the finish. TS spray paints are not affected by acrylic or enamel paints, so the main colour layer can be followed by hand-painted trim, cockpit details or small exterior accents in a separate step. The red brown flat shade brings a muted, non-gloss look that suits military tones, aged bodywork and subdued custom colour schemes. On 1/24 scale car bodies, one can provides enough paint to fully cover 2 or 3 bodies, which also makes it practical for matching replacement shells or repainting several parts in the same tone. At the workbench, the can supports fast base-coating before detail painting begins. It also fits neatly into longer build projects where bodywork, accessories and touch-up stages are handled in sequence with one consistent colour reference. Warning! Not suitable for children under 14 years.
TS spray colours
TS-18 Metallic Red, spray paint, 100 ml
300085018€10.491 l = €104.90
TS-18 Metallic Red is a spray paint for model finishing that brings a vivid metallic tone to plastic surfaces in a semi gloss finish. The aerosol format lays colour across larger sections quickly, making it useful for body panels, exterior shells and separate detail parts where an even coat matters. The can contains 100 ml and is part of the TS paint range described as a special acrylic resin spray. That paint type suits model work where shaped parts, edges and recessed lines need full coverage without heavy brush texture. Metallic Red gives the surface a brighter, light-catching look than a flat colour, while the semi gloss sheen keeps the finish controlled rather than mirror bright. When a higher shine is wanted, TS-13 glossy clear coat 300085013 can be applied over the colour layer for a glossier final surface. This paint fits finishing sessions where plastic components are prepared, coated in light passes and left with a uniform metallic appearance across matching parts. It also works well for refresh projects, custom colour schemes and replacement panels that need to match the same TS-18 shade across the build. Warning! Not suitable for children under 14 years.
TS spray colours
TS-23 Light Blue Gloss, spray paint, 100 ml
300085023€10.991 l = €109.90
TS-23 Light Blue Gloss brings a clean, glossy light blue finish to plastic model work in a 100 ml aerosol can. The spray format suits broad surfaces and shaped parts alike, so body shells, fairings and exterior panels can take colour with a smooth visual flow instead of visible brush marks. This TS paint is identified in the data as a special acrylic resin spray for model use. The can is intended for plastics, making it a practical choice when a project calls for an even colour layer across curved sections, edges and recessed contours. A gloss finish gives the painted surface a brighter, more reflective look than a flat coat, which helps light catch on body lines and molded details. The 100 ml fill also gives useful coverage for larger model sections or for several matching parts within one build. On the bench, the aerosol can supports light, repeated passes across prepared components, whether the goal is a full exterior colour, a coordinated accent on selected panels or a fresh finish for replacement parts. In model car, bike, aircraft or similar hobby projects, the light blue shade stands out clearly while keeping the surface look crisp and uniform. Radio gear, a battery pack, a charger and paints are required separately. Warning! Not suitable for children under 14 years.
TS spray colours
TS-25 Pink Gloss, spray paint, 100 ml aerosol
300085025€10.491 l = €104.90
TS-25 Pink Gloss brings a bright glossy pink tone to model painting in a 100 ml aerosol format that is easy to apply across larger surfaces. The special acrylic resin spray is intended for plastics, making it a practical choice for scale model bodies and shaped parts where an even colour coat matters. The spray format helps cover curved panels, recessed sections and broad outer surfaces more quickly than hand brushing, especially when a uniform gloss look is the goal. Within the TS paint range, TS-25 serves as a distinct colour option for custom schemes, bold accent areas and full exterior coating plans. The can is labelled as an aerosol model paint and carries a net volume of 100 ml. The material information identifies it as a paint mixture with binders, pigments and solvents in a pressurised can. On the workbench, TS-25 Pink Gloss suits builders finishing plastic car bodies, fairings or detail panels that call for a vivid polished colour impression. It also fits repainting tasks, touch-up stages and coordinated multi-colour model projects where a spray-applied gloss pink shade needs to sit cleanly alongside other planned tones. Warning! Not suitable for children under 14 years.
TS spray colours
TS-36 Fluorescent Red Gloss, spray paint, 100 ml
300085036€11.491 l = €114.90
TS-36 Fluorescent Red Gloss brings a vivid, high-visibility colour tone to model finishing in a 100 ml aerosol can, pairing a bright gloss surface with the fast coverage that spray application gives on larger plastic parts. On a bodyshell, fairing or exterior panel, the colour reads boldly and catches the eye under display lighting or out on a running model. This paint belongs to the TS range of special acrylic resin sprays for hobby use. The aerosol format helps lay colour across curved sections, panel contours and wider areas with a more uniform pass than hand brushing on the same surfaces. Fluorescent red suits standout liveries, accent sections and custom paint schemes where a strong visual contrast matters. The can shown for plastics aligns with common model-finishing tasks such as coating exterior shells and formed parts. As an aerosol, this paint should be handled with care and used in well-ventilated conditions. On the bench, TS-36 fits projects that need a bright gloss statement colour, from competition-inspired bodywork to display models with bold trim and panel sections. The 100 ml volume also supports layered application across several sessions when a finish calls for multiple light coats rather than one heavy pass. Warning! Not suitable for children under 14 years.
TS spray colours
TS-52 Candy Lime Green Spray Paint, 100 ml
300085052€10.491 l = €104.90
TS-52 Candy Lime Green brings a bright coated finish to model work with a 100 ml aerosol format that covers larger surfaces quickly and evenly. The semi gloss colour sits between a flatter painted look and a full shine, giving body sections, panels and shaped parts a clean, vivid presence straight after spraying. This TS paint is identified as a special acrylic resin spray and is intended for model finishing use. The aerosol format helps lay colour across contours, edges and broader sections in one continuous pass, which is especially useful when a brush would leave visible strokes on the surface. The can is marked for plastics, making it suited to many common model parts where an even coat and consistent colour matter. When a higher-shine result is wanted, TS-13 glossy clear coat 300085013 can be applied over the colour layer to change the final surface appearance. The 100 ml fill works well for hobby benches where single-colour coverage is needed for shells, panels or accessory parts in a matching shade. Candy Lime Green stands out on display pieces, custom builds and restoration work where a strong green tone helps define the finished look. Warning! Not suitable for children under 14 years.
TS spray colours
TS-64 Dark Mica Blue Gloss, paint spray, 100 ml
300085064€10.491 l = €104.90
TS-64 Dark Mica Blue Gloss is a 100 ml spray paint for model finishing, formulated as a synthetic lacquer that cures in a short time and helps cover larger surfaces with a consistent coat. The dark mica blue gloss colour gives car bodies a rich metallic look that stands out under light and suits both factory-style finishes and custom paint schemes. The aerosol format is especially useful when a build calls for broad, smooth colour coverage across body panels, roofs and curved sections that are harder to finish evenly with a brush. Tamiya states that one can is enough to fully cover 2 to 3 car model bodies in 1/24 scale, which gives a practical guide for planning paint use before a project starts. After the main coat has been applied, acrylic and enamel paints can be used for smaller details because the TS lacquer layer is not affected by them. That makes it easier to separate the main body colour from trim, lights, frames or other picked-out areas during the finishing stage. On the bench, this paint suits full-body colour work on car models where a smooth gloss surface and even metallic tone matter. It also fits multi-step finishing routines in which the main shell is sprayed first and detail painting follows once the body colour has cured. Warning! Not suitable for children under 14 years.
TS spray colours
TS-66 IJN Grey Flat Kure Arsenal, spray paint
300085066€12.291 l = €122.90
TS-66 IJN Grey Flat Kure Arsenal is a 100 ml spray paint for model finishing, built around a synthetic lacquer formula that cures in a short period of time. The aerosol format helps cover larger surfaces with a consistent colour layer, whether the work focuses on a car body, a hull section or other broad exterior parts that are harder to coat evenly with a brush. The flat grey tone is named for Kure Arsenal and suits subjects that call for a restrained military finish rather than a gloss surface. Because the cured coat is not affected by acrylic or enamel paints, the main colour can be sprayed first and smaller details can be added later with other paint types. That sequence supports cleaner separation between the base coat and picked-out features. A single can holds enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, giving a clear reference point for planning larger paint jobs. On the bench, TS-66 fits projects where broad panels need fast, even coverage before finer weathering or detail painting begins. It also works well when several matching parts need the same flat grey finish across a build, helping keep the overall colour treatment consistent from the first pass to the final detail stage. Warning! Not suitable for children under 14 years.
TS spray colours
TS-68 Wooden Deck-Tan, spray paint, 100 ml
300085068€12.291 l = €122.90
TS-68 Wooden Deck-Tan Li.Brown Fla. is a 100 ml spray paint for model finishing, built around a synthetic lacquer formula that cures in a short time and suits broad surfaces that are awkward to cover with a brush. The aerosol format helps lay down an even coat across larger body panels and deck sections, giving scale builds a consistent base colour with fewer passes. This TS paint is designed so later detail work can follow with enamel and acrylic paints, allowing trim, panel accents or small fittings to be picked out after the main colour has dried. The can carries the TS-68 code on the cap for quick shade recognition during a session, and the cap colour gives a direct visual cue for the Wooden Deck-Tan Li.Brown Fla. tone. A 100 ml fill provides a useful planning benchmark, with enough paint to fully cover 2 or 3 car model bodies in 1/24 scale. The paint is intended for adult modelers only. On car bodies, ship deck sections or other large model parts, the spray format supports steady coverage across wide areas where brush marks would interrupt the finish. It fits naturally into multi-step paint work, where a full base coat comes first and smaller accents follow with other paint types once the main surface is complete. Warning! Not suitable for children under 14 years.
TS spray colours
TS-75 Champagne Gold, paint spray, 100 ml
300085075€11.491 l = €114.90
TS-75 Champagne Gold is a 100 ml paint spray for model finishing, combining a metallic gold tone with the fast-curing behaviour of synthetic lacquer. The aerosol format helps lay down colour across broad body sections in an even coat, so larger surfaces can be covered with fewer interruptions during painting. This spray is especially useful on model bodies and other wide exterior parts where brush application would leave a less uniform result. A single can contains enough paint to fully cover 2 to 3 car bodies in 1/24 scale, which gives a practical benchmark when planning a build or a repaint. The lacquer layer also works well in mixed paint workflows because acrylic and enamel paints can be applied afterward for smaller details and picked-out trim. For a glossier surface finish, TS-13 glossy clear coat can be used over the colour coat. On the bench, TS-75 suits full-body colour application, touch-up work on larger panels, and coordinated finishing across several scale car projects. The Champagne Gold shade brings a crisp metallic look to body shells, while the spray format supports steady coverage on roofs, doors, bonnets and other shaped surfaces. Warning! Not suitable for children under 14 years.
TS spray colours
TS-81 British Navy Grey, spray paint, 100 ml
300085081€12.291 l = €122.90
TS-81 British Navy Grey is a 100 ml spray paint developed for model finishing, with a synthetic lacquer formula that cures in a short period of time and helps cover larger surfaces with a smooth, even colour pass. The aerosol format suits broad areas that are harder to finish evenly with a brush, such as body shells, hull panels or other wide exterior sections on scale builds. The colour reference is British Navy Grey, giving a specific muted grey tone for projects that call for a controlled, technical finish rather than a bright accent. Tamiya TS spray paints are described as not being affected by acrylic or enamel paints, which supports a layered workflow once the main colour has been applied across the assembly. That makes it easier to return to vents, trim lines, fittings or other small sections with a finer brush-painted finish. A single can contains 100 ml of paint, and the stated coverage is enough to fully cover 2 or 3 car model bodies in 1/24 scale. On the bench, this makes TS-81 useful for full-body colour coats, larger subassemblies and projects where an even grey base is needed before smaller painted details are added. It also fits repainting sessions where several matching parts need the same tone across one build or across multiple 1/24 scale bodies. Warning! Not suitable for children under 14 years.
TS spray colours
TS-88 Titanium Silver, spray paint, 100 ml
300085088€12.991 l = €129.90
TS-88 Titanium Silver is a 100 ml spray paint for model finishing, built around a synthetic lacquer formula that cures in a short period of time. The aerosol format helps cover larger surfaces with an even coat, making it well suited to car bodyshells and other broad sections where brush painting can leave a less uniform finish. The colour is Titanium Silver, giving model builds a metallic tone that suits bodywork, exterior panels and other visible areas that benefit from a consistent sprayed finish. The paint is described as especially useful for large model surfaces, which makes it a practical choice when a build calls for full-body coverage rather than small touch-up work. One can provides enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, offering a concrete guide for planning paint use across multiple projects or repeat coats where needed. Once the main sprayed coat has cured, further finishing work can continue with enamel and acrylic paints for picked-out details. That compatibility supports layered paintwork on grilles, trim, frames and other smaller sections after the main colour has been laid down, keeping the broad sprayed base and the finer hand-painted accents in the same workflow. Warning! Not suitable for children under 14 years.
TS spray colours
TS-97 Pearl Yellow gloss, paint spray, 100 ml
300085097€11.491 l = €114.90
TS-97 Pearl Yellow gloss is a 100 ml paint spray for model finishing, built around a synthetic lacquer formula that cures in a short time and lays down an even coat across large surfaces. On car bodies, broad bonnets, roofs and side panels can be covered in one continuous colour pass, giving the shell a bright gloss finish with a pearl effect. The spray format is especially suited to full-body painting where brush application would leave a less uniform result across wide panels. A single can is stated to cover 2 or 3 car model bodies in 1/24 scale, which gives a practical guide for planning a complete paint session. After the main colour has dried, smaller trim areas and picked-out details can still be worked in with acrylic or enamel paints. That compatibility supports layered finishing on grilles, window surrounds, mirrors or other accent areas without disturbing the base coat. On the bench, TS-97 suits builders preparing a fresh bodyshell or refinishing a display model that needs a vivid yellow tone with added pearl depth. It also fits multi-stage paintwork where the main body colour is sprayed first and the finer visual details are completed afterward with separate paint types. Warning! Not suitable for children under 14 years.
TS spray colours
TS-24 Purple Gloss, spray paint, 100 ml
300085024€10.491 l = €104.90
TS-24 Purple Gloss brings a bold purple tone and a glossy surface to plastic model projects in a 100 ml spray can. The aerosol format suits larger sections where an even coat matters, such as bodyshell panels, fairings or other shaped exterior parts that benefit from smooth colour coverage. This TS paint is identified as a special acrylic resin spray for model use. The can is intended for plastics, making it a practical choice when a project calls for a uniform finish across curved surfaces, edges and recessed shapes. The gloss effect adds a polished visual character that stands out under light and gives painted parts a cleaner finished appearance. The 100 ml fill offers enough paint for substantial exterior areas while keeping the handling familiar for hobby bench work. As an aerosol paint, it is classified as flammable and the pressurised can must be handled with care. On the workbench, TS-24 Purple Gloss fits projects that need a strong single-colour statement, whether refreshing a bodyshell, finishing a custom build or adding a distinctive accent to visible plastic parts. Used on prepared surfaces in light coats, it supports a neat, consistent result across model components with complex contours. Warning! Not suitable for children under 14 years.
TS spray colours
TS-32 Haze Grey Flat, spray paint, 100 ml
300085032€10.491 l = €104.90
TS-32 Haze Grey Flat brings a muted grey tone and a matte surface to plastic model work in a 100 ml aerosol can. The spray format helps cover larger sections evenly, whether the task is a body shell, exterior panel or accessory part that needs a uniform colour without visible brush texture. This TS paint is identified as a special acrylic resin spray and is made for plastics, making it a practical match for scale model finishing. Light coats can be built up gradually, and the can is intended to be shaken vigorously before use for an even spray pattern. The visible usage guidance recommends a spraying distance of 25 to 30 cm and allowing drying time between coats, which helps maintain a clean surface on detailed parts. The flat Haze Grey shade works well where a non-gloss appearance suits military, industrial or understated road-car styling on model subjects. On the bench, the aerosol can suits builders who want quick colour coverage across multiple parts in one session. It also fits touch-up or finishing work on plastic assemblies where a consistent matte grey helps separate body sections, trim pieces or add-on details from glossier painted areas. Warning! Not suitable for children under 14 years.
TS spray colours
TS-35 Park Green Gloss, spray paint, 100 ml
300085035€10.491 l = €104.90
TS-35 Park Green Gloss is a 100 ml spray paint for plastic model work, combining a solid green shade with a glossy finish that reads clearly on body panels, fairings and exterior parts. The aerosol format helps cover broad surfaces quickly, so larger shells and shaped sections can take on an even colour coat with fewer visible brush marks. This TS colour belongs to Tamiya's special acrylic resin spray range for plastics. The paint is supplied in a pressurised can and is identified as TS-35 Park Green Gloss, making it easy to match within an established hobby colour system when a build calls for a specific green tone. The gloss finish reflects light across curves, edges and raised details, which helps shaped surfaces show their lines after painting. On custom projects, the colour can be used for full-body coverage or for selected exterior sections that need a strong, clean contrast against other painted parts. Used on scale model shells and components, the spray format suits sessions where smooth passes across the surface matter as much as the final shade. The 100 ml fill offers a practical amount for regular bench use, whether the task is refreshing a single body panel, coating a full shell or adding a crisp green accent to a detailed build. Warning! Not suitable for children under 14 years.
TS spray colours
TS-37 Lavender Gloss, spray paint, 100 ml
300085037€10.491 l = €104.90
TS-37 Lavender Gloss brings a vivid purple tone and a reflective finish to plastic model projects in a 100 ml aerosol format. The spray can layout suits broad, even application on curved shells, body panels and formed parts, where a brush can leave visible stroke marks across the surface. This TS colour is identified as a special acrylic resin spray for model use, with the shade code TS-37 clearly matched to Lavender Gloss. The aerosol format is designed for plastic model surfaces, making it suitable for scale car bodies, motorcycle fairings and other shaped components that benefit from a continuous coat. A gloss finish changes how light reads across edges, contours and panel shapes, so moulded lines and body forms stay visually clear after painting. The 100 ml fill also gives enough material for complete colour coverage on many single model bodies or for repeated work across smaller parts. In a hobby workspace, the can suits builders who want a fast, uniform base colour before decals, detail work or final display. It also fits repainting jobs, custom colour schemes and replacement parts that need to match a bright, polished look on plastic model assemblies. Warning! Not suitable for children under 14 years.