Airbrush & model spray gun accessories
Find everything you need for the airbrush technique: from high-quality hoses to effective cleaners for the best results every time!
Airbrush accessories
PC Brush Paint Black, model paint, 23ml bottle
300087228€4.99
PC Brush Paint Black is a water-based model paint supplied in a round 23ml bottle for controlled brush application on selected areas of a build. The formula can be used without thinning, which keeps preparation short and makes it easier to place black coverage exactly where a part, edge or marked section needs it. After drying, the paint becomes water-resistant, giving the finished coat a stable surface for later handling during the build process. The data also states that the dried paint does not dissolve in water or thinner, so cleanup belongs before the coat sets; tools should be washed with water immediately after painting. For layered finishing work, the paint can be painted over with Polycarbonate Spray paints, with the spray applied in several thin coats rather than one heavy pass. This paint suits detail work on model components, small corrections and brush-applied black sections shown in finishing guides or part diagrams. It also fits builds that combine hand-painted accents with later spray stages, where precise placement and a compact 23ml bottle help keep the workbench setup focused and easy to manage. Warning! Not suitable for children under 14 years.
Airbrush accessories
Airbrush Cleaner Acryl 250ml, model paint care
300087089€12.991 l = €51.96
Airbrush Cleaner Acryl 250ml supports consistent maintenance for painting equipment used in model finishing. The cleaning formula is intended for airbrush care and works where dried residue and tarnishes can collect inside the intricate airbrush system, helping keep the mechanism clear for later use. The 250 ml format gives a practical reserve for repeated bench work, whether the session involves frequent colour changes, end-of-day cleanup or restoring tools after weathering work. In addition to airbrush components, the cleaner can be used on weathering sticks and paintbrushes, so one bottle covers several parts of a painting setup. The rectangular bottle shape sits neatly on a shelf or workbench, and the ribbed screw cap supports a secure grip when opening and closing between tasks. Used as part of regular care, this cleaner fits naturally into model painting routines where spray equipment, brushes and finishing tools all need dependable cleanup. It suits bench setups focused on acrylic work and helps keep maintenance close at hand between priming, colour coats and detail finishing. Warning! Not suitable for children under 14 years.
Airbrush accessories
1.5m Air Hose for Revo II, model accessory
300074547€10.99
This 1.5 m air hose for Revo II is a dedicated model accessory built for clean, flexible line routing between compatible threaded connections. The transparent tube keeps the full run visible, while the silver-colored screw couplings at both ends create a direct mechanical connection that matches the technical character of the part. The hose uses clear flexible tubing with black fittings where the line meets each connector, making the transition points easy to identify during installation or replacement. The knurled metal ends support hand tightening and loosening, which helps when the hose is removed for servicing or fitted as a fresh line on Revo II equipment. Its coiled form stores compactly between uses, and the visible tube interior makes it easier to check the line condition during maintenance. In practical use, the hose suits workshop tasks such as replacing a worn line, restoring an existing setup, or keeping a matching spare ready for later service. On a bench or in a hobby room, the 1.5 m length gives enough reach for tidy routing without turning the connection into a rigid fixed run.
Airbrush accessories
Air Control Valve II, airbrush accessory, PF1/8
300074560€21.49
Air Control Valve II adds direct air adjustment to an airbrush setup by fitting inline between the airbrush and the hose. The metal body combines threaded ends with a knurled center section, so pressure changes can be made at the tool while paint is going down across camouflage edges, narrow corners and recessed surfaces. The valve uses a central screw to regulate airflow, with open and close rotation controlling the amount of air passing through the line. Adjustment runs from zero to maximum output, giving a wider working range for different paint application needs. Internal regulation changes the airflow inside the valve itself, which keeps operation smooth and quiet during use. PF1/8 Type-S joints are used on both ends, so the connection standard is clearly defined for matching equipment. The airbrush and hose are not included. On the bench, this format helps when a spray pattern needs quick correction between broader coverage and tighter detail without interrupting the painting sequence. It also suits work on hard-to-reach nooks and crevasses where small pressure changes can help keep control close to the surface. Not compatible with Spray Work Basic Air Compressor products. Warning! Not suitable for children under 14 years.
Airbrush accessories
Spray-Work Air Can 420D, airbrush propellant
300074516€11.491 l = €27.36
Spray-Work Air Can 420D is a pressurized air source for airbrush use, built to support controlled spraying in model painting and hobby finishing. The upright canister pairs with compatible airbrush equipment to deliver the airflow needed for even application, whether the task is broad base coating or careful work along smaller edges and shaped surfaces. The 420 ml format gives this can a larger reserve than smaller workshop refills, which helps keep painting sessions moving with fewer changeovers. The fill consists of dimethyl ether at 99 - 100%, identified in the safety data as a liquefied gas. Hazard marking is stated as H220 for extremely flammable gas and H280 for gas under pressure. The can is marked for airbrush use, and the label illustration shows the intended handling position during spraying. Storage guidance in the supplied safety information states protection from sunlight and temperatures above 50°C, with storage in a well-ventilated place. On the bench, this air can suits detail painting on scale models, parts and hobby surfaces where an airbrush is used for measured coverage and cleaner transitions. It also works well as a practical refill choice for builders who prefer a self-contained propellant can instead of a compressor setup.
Airbrush accessories
Spray-Work Airbrush Stand II, airbrush stand
300074539€21.99
The Spray-Work Airbrush Stand II brings order to hobby painting sessions by giving the airbrush a dedicated resting place on the workbench. Its upright tabletop format keeps the spray tool close at hand during colour changes, short pauses and cleaning steps, while the tray-style base helps separate the airbrush from wet paint residue and loose bench clutter. The stand is designed for model finishing work where steady handling and a clear layout matter. A mounted holder keeps the airbrush positioned above the base instead of lying flat on the table, which helps maintain access to the trigger, paint cup and nozzle area between passes. The tray section also creates space for small jars and painting accessories used during spraying. In a compact workshop corner, that layout supports a tidier sequence for mixing, setting down the airbrush and returning to the next coat. Placed beside a cutting mat, spray booth or paint station, the stand supports a more structured routine for priming, colour application and cleanup. It suits builders who rotate between several paint jars in one session and need a stable place to park the airbrush while adjusting paint, checking coverage or preparing the next step. Warning! Not suitable for children under 14 years.