Model colours/paints/airbrush
Tamiya adds vibrant colour to model making with its premium paints, varnishes, and airbrush products. Click here for a clear and concise overview of the essential information and to explore more about our model making paints!
AS spray colours
AS-33 Camouflage Gray, paint spray, 100 ml
300086533€12.99
AS-33 Camouflage Gray is a 100 ml paint spray made for model finishing where an even, consistent coat matters across larger surfaces. The spray application helps lay down colour smoothly on broad panels and shaped parts, giving camouflage gray coverage that reads cleanly across the whole build. The 100 ml can size provides a practical amount for workshop use when several parts need the same tone. Spray paint is especially useful on shells, body sections and other exterior components where brush marks would interrupt the final look. Camouflage Gray fits military-inspired colour layouts and other subdued paint schemes that call for a restrained gray tone rather than a bright accent. The aerosol format also supports steady passes over curved contours, corners and recessed areas, which helps keep the finish visually consistent from one section to the next. On the bench, AS-33 Camouflage Gray suits fresh builds, repaint work and replacement parts that need to match an existing scheme. It can be used when a model calls for a single gray base coat or when several painted sections need the same colour family to tie the finished appearance together. Warning! Not suitable for children under 14 years.
Brushes & accessories
Blunt Brush S, modeling brush for detail painting
300087029€2.69
Blunt Brush S is a modeling brush shaped for precise paint application on small parts, fine edges and narrow details. The slim bristle tip and light wooden handle create a direct, steady feel at the bench, whether working on trim lines, cockpit details, figure accents or careful touch-ups on miniature surfaces. The brush is presented as a single fine-detail tool rather than a broad coverage brush, which makes it suited to controlled paint pickup and measured strokes. The handle marking identifies it as TAMIYA MODELING BRUSH 000, a format commonly chosen for very small painted areas where larger brushes can flood recesses or soften sharp borders. Its blunt brush designation adds another point of distinction within a hobby setup built around different brush shapes for base coating, lining and finishing. On a model-making table, this brush fits the moments that call for patience and accuracy: picking out raised details, refining painted borders and adding small color notes after the main coat has dried. It also works well as a dedicated brush kept aside for delicate corrections, helping maintain cleaner separation between tiny painted sections. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Chipping Liquid 40ml, finishing material bottle
300087225€6.49
Chipping Liquid 40 ml is a finishing material for plastic models that creates realistic weathering by letting the top paint layer lift away in controlled areas. Applied between a lacquer base color and an acrylic overpaint layer, the water-based formula helps recreate chipped edges, worn panels and damaged paint surfaces that suit military subjects and other heavily used vehicle finishes. The process is specific and hands-on. A thin coat of the liquid is applied by airbrush or brush over the dried base color, then covered with the hull color. Water is added only where paint wear is wanted; this softens the layer so the top color can be peeled away with a toothpick or similar tool. Used carefully, that sequence makes it possible to place scratches and chips where traffic, contact or exposed edges would naturally wear through. Used tools can be washed with water after the session. The 40 ml square bottle fits neatly on the workbench for detail-focused finishing sessions and small batch paint work. This material is oriented toward advanced modelers and works best when the paint sequence is followed closely, as the top color does not peel after it has fully dried. Brushes are not included. Warning! Not suitable for children under 14 years.
Brushes & accessories
Flat Brush No. 0, modeling brush, 4 mm
300087015€2.19
Flat Brush No. 0 brings a narrow 4 mm painting edge to model and hobby work where clean borders and controlled coverage matter. The flat horse-hair bristles pick up paint across a straight edge, making it easier to guide color onto trim lines, compact panels and other small sections that benefit from an even pass. The short square-cut bristle shape creates a defined contact line, while the metal ferrule holds that profile firmly between handle and brush head. A wooden handle is designed to reduce strain on the hand, which helps keep movements steadier through longer painting sessions and repeated touch-up work. This combination of flat tip, No. 0 size and 4 mm width gives the brush a focused role in a painting setup alongside broader brushes and finer pointed tools. On a workbench, the brush suits edging, filling small rectangular areas and laying down smooth coats on model parts that need more coverage than a fine point can provide. It also fits careful finishing passes where a straight bristle edge helps keep paint placement tidy around molded details and panel boundaries. Warning! Not suitable for children under 14 years.
Brushes & accessories
Flat Brush No. 01, modeling brush, slim tip
300087028€1.99
Flat Brush No. 01 is a slim modeling brush built for careful paint application on small surfaces and sharply defined edges. The narrow flat bristle shape gives each stroke a clear contact line, which helps when covering compact sections that need more direction than a round tip can provide. The brush combines a light wooden handle, a silver metal ferrule and a small brown bristle head in a straightforward format suited to hobby bench work. Its flat profile lends itself to edging, short pull strokes and controlled coverage across narrow panels or trim areas. The slim head also makes it easier to place paint into tight sections while keeping the stroke width consistent. For model makers working on fine brushwork, that shape supports neat transitions between painted areas and more deliberate handling around corners and borders. On a workbench, Flat Brush No. 01 fits detail painting sessions where small parts, edge lines or compact surfaces need a measured amount of paint. It also works well as a dedicated brush for touch-ups and careful finishing passes on model projects where a broader head would be less exact. Warning! Not suitable for children under 14 years.
Brushes & accessories
Flat Brush No. 5, modeling brush, flat bristles
300087013€3.19
Flat Brush No. 5 is a modeling brush built for broader painted areas that still need a clean, controlled edge. The flat bristle shape lays paint down in straight passes, which helps when covering body panels, aircraft wings or other larger model surfaces with a more even finish. The brush combines a light wooden handle with a silver-coloured metal ferrule and short, light-coloured bristles. That construction gives a familiar balance for hobby bench work and keeps the working end compact enough for guided strokes along edges, corners and raised details. The No. 5 size sits between very fine detailing tools and wider coverage brushes, making it a practical choice when a project moves from small accents to larger painted sections. It can also be used for controlled application of weathering materials or similar finishing media where a flat edge helps place material in a measured band. On the workbench, this brush fits naturally into model painting sessions that alternate between coverage and control. It suits plastic model kits, scale vehicles, aircraft, figures and scenery pieces where broad areas, trim lines and surface finishing often appear in the same build. For hobby painting routines that rely on clean edges and repeatable strokes, the flat profile gives a clear, predictable contact area on each pass. Warning! Not suitable for children under 14 years.
Brushes & accessories
HG II Flat Brush Medium, modeling brush, flat tip
300087215€10.79
The HG II Flat Brush Medium brings a broad, even painting edge to model work, with very fine PBT resin bristles shaped into a flat tip for smooth, soft brushstrokes. On body panels, interior parts and other flat sections, the medium width helps spread paint in a controlled band while keeping the stroke neat along edges. The brush combines white synthetic bristles, a metal ferrule and a long black handle with a squared end cap. Laser-engraved handle text identifies the HG II series and the medium size, with the size marking shown in Japanese. The handle material is solvent-resistant, a practical detail for sessions that involve hobby paints and common modeling solvents. At the end of the grip, a stopper helps keep the brush from rolling across the work surface and reduces the chance of the bristle tip being knocked out of shape. If that stopper is not needed, it can be cut off with side cutters. This flat brush suits coverage work that needs a cleaner edge than a round tip can provide, such as painting trim, raised details, larger flat areas or straight sections on scale models. It also fits bench setups where the brush is set down repeatedly between coats, washes or touch-up passes.
Brushes & accessories
HG II Rounded Flat Brush Small, modeling brush
300087224€9.99
The HG II Rounded Flat Brush Small brings a compact rounded flat profile together with very fine PBT resin bristles for precise paint application on model parts and other detailed hobby surfaces. Its small tip helps place colour cleanly along edges, into tight sections and across narrow panels where controlled coverage matters. The bristles have a slightly stiff feel, which supports steady stroke control while keeping the brush responsive in close work. A metal ferrule secures the bristle head to the handle, and the black solvent-resistant grip is shaped for comfortable handling during repeated painting passes. Laser-engraved markings on the handle identify the brush as TAMIYA MODELING BRUSH HG II and show the size in Japanese. At the end of the grip, a small tab helps stop the brush from rolling across the bench and lowers the chance of the bristle tip touching the work surface. This brush suits detail painting on scale models, miniatures and other small-format hobby projects where crisp edges and measured paint pickup are more useful than a wide stroke. The end tab can be removed with side cutters when a smooth handle end is preferred for storage or handling.
Brushes & accessories
HG II Rounded Flat Brush XS, modeling brush, PBT
300087223€9.99
The HG II Rounded Flat Brush XS is built for controlled detail painting, pairing a very fine rounded flat tip with PBT resin bristles that carry paint neatly into small areas. The slightly stiff bristle feel supports crisp placement on narrow edges, tiny parts and close finishing work, where a broader brush can leave too much paint behind. Its handle is made from solvent-resistant material suited to regular bench use with modeling paints and related liquids. A metal ferrule secures the bristle head, and the grip carries laser-engraved HG II series text plus the size marking in Japanese, so the brush can be identified quickly among other tools. At the end of the handle, a small tab helps keep the brush from rolling across the table and lowers the chance of the tip touching the work surface; the tab can be removed with side cutters when a smooth end is preferred. On model kits, miniatures and painted accessories, the XS shape suits careful touch-ups, fine borders and compact color areas that need a steady hand and a clean edge. It also fits finishing sessions where several brush sizes are laid out together and quick size recognition keeps the painting flow focused.
Brushes & accessories
High Finish Flat Brush Nr. 0, hobby paintbrush
300087046€5.79
The High Finish Flat Brush Nr. 0 is a slim hobby paintbrush built for careful, small-scale brushwork. Its narrow flat bristle shape supports crisp paint placement on edges, trim sections and compact surface areas, while the long black handle gives a balanced hold during slow, deliberate strokes. A silver metal ferrule secures the short orange bristles and keeps the working end compact, which helps when paint needs to stay within tight boundaries on model parts or craft details. The flat profile is useful for drawing straight passes across narrow sections, laying down thin coats and refining painted areas after broader coverage has been applied. In a painting setup with jars, palettes and small components on the table, the Nr. 0 size fits the moments that call for accuracy rather than wide coverage. This brush works well alongside detail painting, touch-up steps and finishing passes where a clean edge matters. On scale builds, diorama elements or craft pieces with small painted sections, the narrow head supports measured application and a tidy result. Warning! Not suitable for children under 14 years.
Brushes & accessories
High Finish Flat Brush Nr. 02, hobby paintbrush
300087045€5.79
The High Finish Flat Brush Nr. 02 is a precision hobby paintbrush made for careful work on scale models, miniatures and other small painted parts. Its narrow flat tip supports clean paint placement on edges, trim sections and compact surfaces where a larger brush can leave too much paint at once. The brush combines a long black handle, a silver metal ferrule and a small orange bristle head in a layout built for controlled hand movement. The flat profile helps guide short, even strokes across raised details and straight borders, while the slim head reaches confined areas that need a tidy finish. This makes the brush useful for touch-up work, thin coats and small decorative accents where brush width matters as much as paint quantity. The compact head also helps separate neighbouring painted sections when different colours meet on the same part. On the workbench, the brush suits careful finishing passes on body details, cockpit parts, figures, accessories and miniature scenery. It also fits paint correction tasks after masking removal or detail picking on corners and panel edges, where measured brush contact helps keep surrounding areas clean. Warning! Not suitable for children under 14 years.
Brushes & accessories
High Finish Flat Brush Nr. 2, hobby paintbrush
300087047€6.79
The High Finish Flat Brush Nr. 2 is a slim hobby paintbrush built for controlled, detail-focused painting. Its flat angled bristle tip creates a clear working edge, making it easier to place paint neatly along borders, corners and small surface sections while keeping strokes deliberate and even. The long black handle and silver metal ferrule give the brush a narrow profile that stays easy to guide in close work. That shape supports careful paint application on model parts, craft details and other small areas where a broader brush would cover too much at once. The angled tip also helps when shifting between edging and filling, so one brush can handle crisp lines as well as short, measured passes across compact surfaces. On the workbench, the Nr. 2 size fits painting sessions that call for accuracy rather than broad coverage. It suits touch-ups, trim work and controlled colour placement on smaller sections, where a steady edge and a slim handle help keep the brush tip in view throughout each stroke. Warning! Not suitable for children under 14 years.
Brushes & accessories
High Finish Pointed Brush, fine hobby brush
300087049€5.79
The High Finish Pointed Brush, fine is built for detail painting where a very small tip and careful control matter most. Its pointed bristle shape places paint into narrow areas, fine lines and small accents with a more exact touch than a broader brush, making it well suited to miniature finishing, touch-up work and close visual detailing. The long black handle gives the brush a slim, balanced form that sits comfortably in the hand during short, deliberate strokes. A silver metal ferrule connects handle and bristles, helping the fine tip keep its defined shape while working around edges, recesses and other compact painted sections. The clean, minimal layout of the brush also makes it easy to position close to the surface when accuracy matters more than coverage. On a workbench, this brush fits the stages of a paint job that call for restraint rather than speed: picking out trim, refining borders, adding small highlights or correcting tiny areas after a broader coat has dried. It also suits careful craft and hobby tasks where a narrow pointed brush is the right tool for measured paint application. Warning! Not suitable for children under 14 years.
Brushes & accessories
High Finish Pointed Brush, hobby brush, ultra fine
300087048€6.19
The High Finish Pointed Brush in ultra fine format is built for detail painting where a clean tip and controlled movement matter most. Its narrow pointed bristle shape supports careful paint placement on small features, whether the task is tracing a fine line, refining a painted edge or adding colour to compact recessed areas. The brush combines a long black handle with a silver metal ferrule and a very slim working tip. That layout keeps the grip clear of the painted surface during close work and helps guide short, deliberate strokes in confined spaces. On scale models, the ultra fine point is suited to cockpit details, trim lines, small fittings and other areas where a broader brush would spread paint too widely. It also fits touch-up work after masking, careful accent painting and other finishing steps that depend on a sharply defined point. Beyond model painting, the brush also suits arts and crafts tasks that call for a narrow tip and measured paint flow. It works well at a desk or hobby bench where detail, correction and neat edge work take priority over fast coverage, giving precise control for small-scale painting sessions. Warning! Not suitable for children under 14 years.
Brushes & accessories
High Finish Pointed Brush, small hobby brush
300087050€5.79
The High Finish Pointed Brush, small is a fine hobby brush built for detail painting where a narrow tip and careful control matter most. Its pointed bristles support accurate paint placement on small parts, panel lines and tight edges, while the slim black handle and silver ferrule give the brush a clean, balanced working form for close hand movements. This small version suits tasks that call for measured paint pickup rather than broad coverage. The long handle helps guide short, deliberate strokes, and the pointed profile makes it easier to reach recessed areas or trace narrow borders with less spill into surrounding sections. The brush shape also supports touch-up work on painted assemblies, figure details and other miniature surfaces where a broader head would cover too much at once. On the workbench, this brush fits neatly into focused finishing steps such as edging, accent painting and refining small visual elements after base colours are in place. It also works well for careful line work on hobby and model projects that need a crisp, controlled tip instead of a wide brush face. Warning! Not suitable for children under 14 years.
Lacquer colours
LP-84 Camouflage Gray, lacquer paint, 10 ml
300082184€3.59
LP-84 Camouflage Gray brings a defined lacquer colour to scale modelling work, with a 10 ml content size that fits neatly into regular bench routines for brush application, detail correction or controlled paint mixing. The HGV designation identifies the shade as a military-style grey suited to projects that call for a restrained, technical finish rather than a bright accent tone. Within a paint rack, LP-84 adds a dedicated grey reference that can be kept separate from broader neutral shades when a build calls for camouflage-led colour planning. The jar size supports measured use on smaller assemblies, selected panels and finishing passes where colour control matters more than bulk volume. As a lacquer paint, it belongs in modelling workflows built around surface preparation, layered colour application and precise tonal matching. The clearly named shade also helps when returning to an unfinished build and matching the same colour again. On the workbench, LP-84 Camouflage Gray fits naturally into armour, transport and utility vehicle painting sessions, as well as detail jobs on accessories and exterior parts. The 10 ml quantity is easy to set alongside other paints during focused finishing work, whether the goal is a single correction, a matched repaint or a planned camouflage scheme. Warning! Not suitable for children under 14 years.
Lacquer colours
LP-85 Medium Air Gray, lacquer paint, 10 ml
300082185€3.59
LP-85 Medium Air Gray is a lacquer paint in a 10 ml bottle, made for model finishing where a controlled gray tone matters on small surfaces, trim sections and technical details. The Medium Air Gray shade lends itself to aircraft-inspired schemes, military subjects and other scale builds that call for a restrained, neutral finish rather than a bright accent color. This paint is identified in the LP range as LP-85 and is supplied as a brush paint. The compact bottle size keeps a dedicated shade close at hand for repeat touch-ups, panel work and color matching across separate assemblies. For hobby benches with several ongoing builds, a single 10 ml bottle is easy to store alongside other finishing supplies while still covering the focused areas where exact shade placement counts most. The paint is classified as flammable and carries hazard labeling for careful handling. On the bench, LP-85 suits detail passes on body sections, interior parts, equipment pieces and other model components where a medium gray finish helps define contrast between neighboring colors. It also works well when a build calls for a consistent gray across multiple sessions, keeping the same tone available for corrections, additions and later refinements. Warning! Not suitable for children under 14 years.
Brushes & accessories
Modeling Brush Basic Set, brush set
300087066€6.69
The Modeling Brush Basic Set brings 3 essential brush shapes together for model painting, giving a clear starting point for base coats, smaller sections and fine detail work at the bench. With Flat Brush No. 3, Flat Brush No. 1 and a small pointed brush in one set, the selection covers broad strokes, controlled edge work and precise paint placement on compact parts. The wider flat brush suits larger painted areas where even coverage matters, while the smaller flat brush helps guide colour along tighter sections and defined edges. The pointed brush is shaped for narrow lines, corners and delicate accents that call for a finer tip. Natural wood handles and metal ferrules give the brushes a classic workshop build, and the different brush profiles make it easier to switch between coverage and detail without interrupting the painting process. On scale models, miniature parts and other hobby painting tasks, the set supports steady progress from the first colour layer to the final touch-up. It works well as an entry set for brush painting sessions that need both surface coverage and careful detail control in a compact 3-brush selection. Warning! Not suitable for children under 14 years.
Brushes & accessories
Modeling Brush HF Standard Set, brush set
300087067€15.79
The Modeling Brush HF Standard Set brings together 3 dedicated brushes for model painting, making it easier to move from larger painted areas to crisp finishing work with one coordinated set. The combination of High Finish Flat Brush No.0, High Finish Flat Brush No.2 and High Finish Pointed Brush Ultra Fine supports clean coverage, controlled edges and very fine line work across detailed builds. The 2 flat brushes suit different stroke widths, so base colours, smaller panels and touch-up sections can be handled with a brush that matches the area being painted. The ultra fine pointed brush is shaped for narrow lines, tiny accents and careful work around small molded details. Each brush uses special synthetic hair specified for model painting, a material choice aimed at controlled paint pickup and steady transfer on miniature surfaces. Black handles, silver ferrules and clearly differentiated tip sizes also make the set easy to sort and reach for during longer bench sessions. On a worktable, the set fits naturally into painting stages such as base coating, edge definition and final detail passes on scale subjects. It also works well as a compact core brush selection for builders who want one set ready for regular finishing tasks instead of choosing separate brushes one by one. Warning! Not suitable for children under 14 years.
Airbrush accessories
PC Brush Paint Black, model paint, 23ml bottle
300087228€4.99
PC Brush Paint Black is a water-based model paint supplied in a round 23ml bottle for controlled brush application on selected areas of a build. The formula can be used without thinning, which keeps preparation short and makes it easier to place black coverage exactly where a part, edge or marked section needs it. After drying, the paint becomes water-resistant, giving the finished coat a stable surface for later handling during the build process. The data also states that the dried paint does not dissolve in water or thinner, so cleanup belongs before the coat sets; tools should be washed with water immediately after painting. For layered finishing work, the paint can be painted over with Polycarbonate Spray paints, with the spray applied in several thin coats rather than one heavy pass. This paint suits detail work on model components, small corrections and brush-applied black sections shown in finishing guides or part diagrams. It also fits builds that combine hand-painted accents with later spray stages, where precise placement and a compact 23ml bottle help keep the workbench setup focused and easy to manage. Warning! Not suitable for children under 14 years.
Brushes & accessories
Pointed Brush Medium, modeling brush with wood handle
300087016€2.89
The Pointed Brush medium is built for careful paint application where small details and clean edges matter. Horse-hair bristles form a fine pointed tip that helps place paint with accuracy on narrow sections, trim areas and delicate surfaces, while the wooden handle supports a steady hold during close work. Its slim profile suits hobby benches where controlled strokes count more than broad coverage. The pointed shape helps guide paint into small recesses, along panel lines or onto tiny raised details without flooding surrounding areas. The natural wood handle adds a familiar, balanced feel in the hand, and the strain-reducing design supports longer sessions spent refining miniature parts, model accessories or other detailed painted sections. On a model-making table, this brush fits the moments that call for patience and precision, from touching in small accents to sharpening edges after a base coat has dried. It also works well as a dedicated detail brush kept alongside broader brushes, ready for the final passes that define crisp, finished-looking results. Warning! Not suitable for children under 14 years.
Brushes & accessories
Pointed Brush Small, modeling brush for detail work
300087017€2.89
The Pointed Brush Small is made for detail painting where a broad stroke would overwhelm the surface. Its fine pointed tip helps place paint on narrow edges, recessed lines and small moulded sections, giving model work a cleaner, more controlled finish at the stage where accuracy matters most. The slim white handle keeps the brush easy to guide during short, careful movements. That shape suits tasks such as picking out cockpit controls, tracing trim, refining panel accents and touching in tiny areas after the main colour coat has dried. The pointed profile also helps when paint needs to reach corners or raised details without flooding the surrounding surface. For miniature and scale work, that control can make colour separation and final finishing more precise. On the bench, this brush fits the moments that call for patience rather than coverage: adding fine lines, correcting small sections and working through the last visual details that give a build its finished character. It also suits careful hobby painting on compact parts where a steady tip and measured paint application are more useful than a larger brush head. Warning! Not suitable for children under 14 years.
PS spray paints
PS-XX Dark Blue Polycarbonate Spray Paint 100 ml
300069944€12.49
PS-XX Dark Blue is a 100 ml spray paint for polycarbonate bodies, made for model shell finishing where the coating needs to match the body material. The dark blue shade gives RC bodyshell projects a strong, even color base that reads clearly on curved fenders, roof sections and side panels. As part of the PS paint range, this spray is intended for use on polycarbonate shells rather than general household surfaces. That material focus matters during body preparation, because RC shells flex and carry molded contours, window lines and wheel arch shapes that need a coating suited to the substrate. The 100 ml content gives useful capacity for complete coverage on many shell layouts and also supports follow-up work such as reinforcing color depth in selected areas. In multi-step paint schemes, Dark Blue can serve as the main body color or as one section within a masked design. On the bench, the can fits naturally into body finishing work for touring cars, buggies or other RC shell projects that use polycarbonate. It suits fresh builds, replacement bodyshells and repaint work where a defined dark blue tone is needed for a clean, model-focused finish.
Brushes and accessories
Sanding Cloth #600, model hobby abrasive sheet
300087231€4.69
This #600 sanding cloth brings a controlled abrasive surface to model hobby work, combining a soft backing with a grit suited to material removal, surface correction and early-stage finishing. The 170 x 130 mm format sits flat on benches, wraps around sanding blocks and follows curved sections more easily than a rigid sheet when bodywork, filler or primer needs even attention. The cloth can be used for both dry and wet sanding, which supports different workshop routines across paint preparation and surface cleanup. Water use helps carry sanding residue away from the contact area, while dry use suits quick checks and local corrections between steps. The abrasive range is part of a 5-grit series that also includes #1000, #1500, #2000 and #3000, with the number after # indicating the roughness grade. This sheet is supplied as 1 piece. On model bodies, parts and other hobby surfaces, the soft cloth structure stays easier to place over edges, corners and gentle curves. Limited fold lines help avoid pronounced scratch marks when the sheet is bent during use, making it a useful choice for repeated sanding passes in detailed finishing work. Warning! Not suitable for children under 14 years.
Diorama texture paints
TextureClaySoil Brown, diorama clay, 150g
300087221€14.49
TextureClaySoil Brown brings shaped ground relief to diorama bases with a pre-colored brown clay that is made for soil effects rather than a flat painted surface. The 150 g pack suits scenes across a wide 1/6 to 1/48 scale range, where uneven earth, ruts and worked terrain help a vehicle or figure sit more naturally in the setting. The water-based formula limits odor and helps limit dirt on hands during longer shaping sessions. Numerous colored particles in the clay support a more natural soil look, and the surface can be worked directly after kneading the bag contents. A thin layer of bond is applied to a rigid display base first, then the clay is spread over it and textured with stiff brushes to form irregular ground. Tracks and tires can be pressed into the surface to depict traces, and Brown can be mixed with Dark Earth to shift the tone across the base. The clay is not adhesive like putty, so cement or wood glue is required separately. Solvent cement and instant cement are not suitable. Drying takes about 2 to 7 days. On military scenes, vehicle displays or figure settings, the clay helps turn a plain base into terrain with visible depth and contact marks. It also suits compact groundwork studies where brush texture, wheel impressions and mixed earth tones define the final scene. Warning! Not suitable for children under 14 years.
Diorama texture paints
TextureClaySoil DarkEarth, diorama clay, 150 g
300087222€14.49
TextureClaySoil DarkEarth is a 150 g diorama clay for building realistic ground texture on scenic bases and model displays. The dark earth colour and the numerous coloured resin particles work together to give the surface a soil-like appearance, while the clay body can be shaped into bumps, shallow depressions and broken terrain that look less flat than a plain painted base. This modelling material is aimed at groundwork rather than fine structural parts. Spread across a base, it helps establish the landform under vehicles, figures or military scenes before further detailing is added. The mixed particle content creates visible variation through the surface, which helps earth sections avoid a uniform finish. Because the compound is already coloured in a dark earth tone, the base starts with a terrain-appropriate look even before weathering powders, grass or other scenic materials are applied. On a tank display, the clay can define churned soil around the running gear area and shape the rise and fall of the ground beneath the hull. On a small vignette or larger diorama, it supports rough paths, embankments and irregular field surfaces that give the scene a more convincing setting. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Sponge Brush Fine, model tool
300087084€6.19
The Weathering Sponge Brush Fine brings a precise applicator shape to close, detailed finishing on scale models. Its fine white sponge tip reaches small edges, narrow sections and tight surface areas where broad tools can leave too much material, making it suited to subtle weathering passes and controlled blending. A silver metal ferrule secures the sponge tip to a tapered black handle, and the longer handle gives a balanced hold for short dabbing motions and careful directional strokes. The brush is specially designed for use with Weathering Master material, so pigment can be picked up, placed and softened in small amounts rather than spread in a heavy patch. This makes it useful for building worn highlights, dusty corners, shaded panel lines and light grime effects step by step. On military subjects, road cars, motorcycles or rail models, the fine tip helps place weathering exactly where surface detail needs extra depth. It also suits touch-up work after the main paint stage, when small marks, edge wear and blended transitions can change the overall finish of a model without covering the underlying detail. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Sponge Brush Medium, hobby tool
300087083€6.19
The Weathering Sponge Brush Medium is a hobby finishing tool made for detailed weathering work on scale models and similar surfaces. Its oval sponge tip applies Weathering Master material with a soft, controlled touch, so shading, dust effects and worn edges can be built up in small steps instead of landing as a hard brush mark. A resilient sponge head changes how weathering material meets the surface. Dabbing creates broken, natural-looking texture, while light sweeping or tapping helps blend pigment into corners, raised detail and recessed lines. The tapered black handle and silver ferrule keep the brush balanced in the hand, and the printed Medium designation makes it easy to distinguish from other sizes on the workbench. This version sits between pinpoint application and wider coverage, which helps when a finish needs both control and visible spread. On vehicle bodies, aircraft panels, armour sections or diorama parts, the brush supports rust tones, road grime, soot effects and subtle fading with a measured application pattern. It suits finishing sessions where repeated passes matter, whether adding a faint dusty edge around vents or building heavier deposits around seams and textured surfaces. Warning! Not suitable for children under 14 years.
XY acrylic colours
XF-1 Flat Black, acrylic paint, 23 ml jar
300081301€5.491 l = €238.70
XF-1 Flat Black is an acrylic paint for scale model finishing, supplied in a 23 ml jar and suited to the deep matte areas that give a build visual weight. The flat black tone fits naturally on chassis sections, cockpit parts, mechanical details and shadowed recesses where a reflective surface would break the scale effect. The acrylic formula supports careful brushwork on small parts and controlled coverage across larger painted sections. On military subjects it can define tools, tracks and interior sections; on cars it suits undersides, trim areas and engine bay details; on aircraft it works well for cockpit elements and selected panel accents. The 23 ml jar size keeps a frequently used workshop colour close at hand for repeat touch-ups, layered weathering steps or fresh contrast on newly added parts. At the bench, Flat Black often becomes one of the first colours opened and one of the last used for final corrections. It suits focused detailing sessions as well as broader finishing work, giving model builders a reliable matte black shade for projects that call for depth, separation and crisp visual definition.
XY acrylic colours
XF-2 Flat White, acrylic paint, 23 ml jar
300081302€5.491 l = €238.70
XF-2 Flat White is an acrylic paint for model work, supplied in a 23 ml jar and formulated for brush application. The matte white color gives scale builds a clean, non-gloss finish that suits everything from small cockpit details to larger painted sections, with the jar size keeping enough paint on hand for repeat use across a project. The paint is identified as XF-2 Flat White in the Tamiya acrylic range, making it easy to match with build notes, color plans and established hobby paint references. The safety data names it as a liquid paint with a flash point of 33°C and a density of 1.2 g/mL at 23°C. The listed appearance is white with an alcohol odor. For handling, use in well-ventilated areas and keep away from heat, sparks and open flames. Protective gloves and eye protection are stated in the safety information. On the bench, this color fits careful brushwork on model bodies, interior sections, figures, scenery details and repair spots where an even matte white is needed. The 23 ml format also suits keeping a standard white ready between sessions for touch-ups, layered coverage and consistent finishing across multiple builds.
PS spray colours
PS-5 Black, polycarbonate spray paint, 100 ml
300086005€10.991 l = €109.90
PS-5 Black brings a dedicated spray format to polycarbonate model finishing, combining a deep black colour with the quick, even coverage of an aerosol can. The 100 ml content gives a usable amount for coating bodyshell sections, laying down backing coats or refining darker design areas on compatible model parts. This paint is identified for polycarbonate, which matters when the surface calls for a formula intended for that material rather than a general craft coating. The spray can format helps cover curved panels, roof sections and side areas with a continuous pass instead of brush marks. Black also plays several concrete roles in model finishing, from solid single-colour bodies to contrast sections, window borders and visual depth behind brighter outer colours. The compact can size stores easily with other workshop supplies while keeping the colour reference simple through the PS-5 designation. On the bench, PS-5 Black fits paint preparation for RC bodyshell projects, replacement shells and detail-led custom schemes. It also suits repeat finishing sessions where the same black tone is needed across separate polycarbonate parts or later repaint work. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-20A Acrylic Thinner 250ml, paint thinner
300081040€12.791 l = €51.16
X-20A Acrylic Thinner 250 ml is a dedicated thinner for Tamiya acrylic and polycarbonate colors, giving model painting work a controlled way to adjust paint behavior before it reaches the brush or airbrush. The bottle format keeps the liquid ready at the bench for measured mixing during body finishing, detail painting or touch-up work. The formula is identified in the safety data as a solvent in water, with propan-1-ol listed among the components. The bottle carries a ribbed screw cap for secure closure between sessions, and the 250 ml fill volume suits repeated use across multiple painting stages. Label information also states Conforms to ASTM D4236. For handling, the container is marked as flammable and specifies use in well-ventilated areas, with eye protection required. The liquid is colorless and has a solvent odor. On a model bench, X-20A can be kept alongside paint jars for mixing smaller amounts for fine lines or larger batches for broader coverage, depending on the painting task at hand. The 250 ml size also makes it a useful refill option when paint preparation and cleanup are part of regular building and finishing routines. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-11 Chrome Silver Gloss, acrylic paint, 10 ml
300081511€3.591 l = €359.00
X-11 Chrome Silver Gloss brings a bright metallic finish to plastic model building, with a brush paint format that suits controlled work on small parts and defined sections. The 10 ml jar size keeps the paint easy to handle during detail painting, whether the focus is trim, cockpit elements or mechanical accents that need a reflective silver tone. This acrylic paint is identified as X-11 and described as Chrome Silver Gloss, giving model builders a specific shade for metallic highlights rather than a general silver. The paint is supplied as a liquid brush colour, which makes it suitable for placing colour into recesses, along edges and across moulded detail where precision matters. The safety data identifies the mixture as flammable and states that it should be used in well-ventilated areas. The same documentation describes a density of 1 g/ml at 23°C and a flash point of 31-33°C. On the bench, this colour suits small finishing steps that change the look of a build, such as picking out grilles, trim strips or interior parts with a brighter metallic contrast. It also works for touch-up tasks when a model needs a consistent chrome silver gloss across separate painted sections.
Primers
Fine Surface Primer L, primer spray, white 180 ml
300087044€14.791 l = €82.17
Fine Surface Primer L is a white primer spray in a 180 ml aerosol can, made for preparing model surfaces before painting. The white tone creates a bright undercoat that supports clean colour development on later layers, while the spray format helps reach broad panels and shaped parts with the same coating step. The can is specified for plastic, metal and wood, which makes it suitable for mixed-material model work without changing to a different primer type. The formulation is described as a primer or pre-paint coating, so its role is surface preparation rather than the final colour finish. On body panels, housings or scratch-built sections, the white base can help lighter paint shades keep their intended tone instead of being dulled by a darker substrate. The aerosol format also suits parts with edges, recesses and angled surfaces that are awkward to cover evenly with a brush. According to the supplied safety data, the contents are binders, pigments and solvents in a pressurised can. This spray fits naturally into model painting sessions where separate parts are primed before the colour coat, and it also suits touch-up work on metal or wood components that need the same white base. Use is intended outdoors or in well-ventilated areas, as stated in the safety documentation. Warning! Not suitable for children under 14 years.
XY acrylic colours
XF-56 Flat Metallic Grey, acrylic paint, 10 ml
300081756€3.591 l = €359.00
XF-56 Flat Metallic Grey is an acrylic paint for scale modelling work, supplied in a 10 ml jar that keeps the quantity focused on detail painting, touch-ups and smaller painted sections. The flat metallic tone combines a subdued grey base with a restrained metal effect, giving mechanical parts, body details and equipment surfaces a more technical look than a plain solid grey. Within a paint lineup, a shade like Flat Metallic Grey is useful where a bright silver would appear too reflective and a non-metallic grey would look too flat. The acrylic format supports controlled application on narrow edges, recessed areas and picked-out components. On military subjects, vehicle details and machinery sections, the colour can help separate metal parts visually from surrounding panels. The 10 ml size also suits bench storage, colour rotation and project-specific paint selection without committing to a larger volume. On the workbench, XF-56 can be used for careful brushwork on vents, housings, brackets or trim where a muted metallic note adds depth. It also fits finishing sessions that focus on selective accents, repairs or colour correction across an existing model scheme.
XY acrylic colours
X-11 Chrome Silver Gloss, acrylic paint, 23 ml
300081011€5.491 l = €238.70
X-11 Chrome Silver Gloss brings a bright metallic silver tone to model surfaces with a gloss finish that catches light across trim, panels and small accent parts. The 23 ml jar suits repeated brush-paint work on plastic model building projects where a reflective chrome effect is needed on selected details. This acrylic brush paint is identified as a liquid mixture of pigments, binders and solvents. The safety data names it for plastic model building and lists a density of 1 g/mL at 23°C, with a boiling range of 80 to 120°C and a flash point of 31 to 33°C. The colour is silver and the odour is alcohol. These material characteristics matter during careful bench work, where thin edges, raised moulded parts and small surface sections call for controlled paint pickup and steady coverage rather than broad spray application. Used on model trim, mechanical accents or highlighted body sections, the gloss metallic finish helps separate fine visual details from surrounding colours. For handling, the safety data states that the paint is flammable and should be used in well-ventilated areas, with vapour and aerosol inhalation avoided and eye protection worn.
XY acrylic colours
X-18 Semi Gloss Black, acrylic paint, 10 ml
300081518€3.591 l = €359.00
X-18 Semi Gloss Black is an acrylic brush paint for plastic model building, supplied in a 10 ml jar for controlled application on smaller parts and focused paint sessions. The semi gloss finish gives black surfaces a measured sheen that reads cleaner than flat black and less reflective than full gloss, which helps shaped details stay visible under light. This paint is identified as X-18 and described as black with a semi gloss character, making it useful for trim, cockpit sections, mechanical parts and other areas where a solid dark tone needs a subtle surface highlight. The liquid formula is supplied as a brush paint rather than a spray, which supports careful work around edges, recesses and molded detail. On mixed-color builds, the black tone also works as a visual separator between neighboring parts and markings. The compact 10 ml size keeps the jar easy to store alongside other modeling colors and practical for projects that need targeted coverage rather than large-area coating. At the workbench, the jar format suits short painting steps between assembly stages, weathering passes or final detail corrections. It fits builders who paint figures, vehicle interiors, accessories or exposed components and need a dependable black with a restrained sheen for repeated finishing tasks.
XY acrylic colours
X-27 Clear Red Gloss, acrylic paint, 10 ml
300081527€3.591 l = €359.00
X-27 Clear Red Gloss brings transparent red colour to plastic model building, adding a glossy tinted finish that leaves moulded detail and surface structure visible beneath the coat. The acrylic paint format suits careful brush application on small sections where a solid opaque layer would hide the part's shape. The 10 ml content works well for repeated detail sessions on lenses, light units and other clear accents across multiple builds. As a clear gloss shade, it is suited to parts that need colour while still showing the form underneath, rather than covering them with a flat block of pigment. The paint is supplied in liquid form and is identified as X-27 within the X-Acrylic range. The safety data names it as a glossy special acrylic resin paint for plastic model building. On the bench, this shade fits focused finishing work such as colouring rear light sections, transparent inserts or small decorative areas that need a red gloss effect. It can also be kept alongside other modelling paints for touch-up work when a build calls for a transparent colour layer instead of an opaque coat.
PS spray colours
PS-1 White, polycarbonate spray paint, 100 ml
300086001€10.991 l = €109.90
PS-1 White brings a dedicated spray paint option to polycarbonate model work, with a 100 ml aerosol format that suits clear RC bodyshells and other compatible parts. The white tone gives shells a crisp, high-contrast finish that stands out on track layouts, display shelves and custom builds alike. The formula is specified for polycarbonate, which matters when painting flexible model bodies that need the right type of coating. The aerosol can lays paint over broad roof sections, curved fenders and narrow contour lines with a continuous spray pattern that is difficult to match with a brush. White also works across several finishing approaches: as a full body colour, as a bright backing coat behind other colours, or as a clean base under decals and racing graphics. In model projects with layered paint plans, that flexibility in colour use helps keep the finish clear and readable. This spray paint fits naturally into RC body preparation, repaint work and fresh custom schemes. It can be used when refreshing a well-run bodyshell, finishing a newly cut shell or setting up a motorsport-inspired livery with strong contrast and clear panel definition. Paints are required separately. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-10 Gun Metall Gloss, acrylic paint, 10 ml
300081510€3.591 l = €359.00
X-10 Gun Metall Gloss brings a dark metallic tone to scale model finishing, with a 10 ml jar size that suits detail painting, touch-ups and smaller painted sections. The acrylic brush paint format gives controlled application on parts where a metallic surface needs definition rather than a broad overall coat. The Gun Metall shade works well on mechanical-looking areas, trim pieces and surface details that benefit from a darker reflective finish. As a liquid paint mixture with pigments and binders, it is intended for model building use and supports careful colour placement on selected sections of a build. The compact jar size stores easily alongside other workshop colours and keeps a focused amount ready for repeated detail sessions. The gloss finish adds a cleaner light-catching effect than a flat coat, which helps metallic accents stand apart from surrounding colours. On a workbench, the 10 ml format fits neatly into paint racks, tray setups or small hobby spaces where quick access matters during painting stages. It suits builders refining panel sections, equipment details or small exterior parts, especially when a darker metallic note completes the final look of the model.
XY acrylic colours
X-26 Clear Orange Gloss, acrylic paint, 10 ml
300081526€3.591 l = €359.00
X-26 Clear Orange Gloss brings a transparent orange tone to plastic model building, combining colour tinting with a gloss surface that works well on small visual accents and clear effect areas. In a 10 ml jar, the paint quantity stays practical for bench use, whether the task is refining light lenses, adding warm transparent shading or adjusting selected body details. This X-Acrylic paint is identified in the safety data as a glossy brush paint for plastic model building and is supplied as a liquid mixture of binders, pigments and solvents. The clear orange character allows underlying moulded detail to remain visible instead of covering it with an opaque coat. A density of 1.0 g/ml is stated in the data, and the solvent content is listed at 50 - 60%, pointing to a fluid paint structure suited to thin, even application. The alcohol-like odour and flammable classification also make clear that careful handling and good ventilation belong to workshop use. On the modelling table, the 10 ml format fits short painting sessions, correction work and colour matching across separate parts without committing to a large container. It suits builders working on vehicle lights, transparent inserts and other small sections where a glossy tinted finish helps the painted area stand out with clean, focused colour.
XY acrylic colours
XF-16 Flat Aluminium, acrylic paint, 10 ml
300081716€3.591 l = €359.00
XF-16 Flat Aluminium is an acrylic paint for scale modelling work, supplied in a 10 ml jar for controlled use on smaller sections and precise finishing tasks. The flat metallic tone suits areas that call for an aluminium appearance with a subdued surface, such as structural details, trim sections or mechanical elements that should avoid a glossy look. The acrylic formula makes this colour a practical choice when a build calls for careful brushwork, edge definition or touch-up passes after main painting is complete. A 10 ml jar also helps keep the shade manageable on the bench, with enough paint for repeated detail sessions while staying easy to store alongside other modelling colours. The Flat Aluminium tone can be used to separate metal parts visually from surrounding body colours, interior sections or darker assemblies, giving small components clearer contrast on the finished model. On military subjects, road cars, motorcycles or workshop accessories, this shade fits naturally into painting sessions where bolts, housings, panels or exposed metal sections need a restrained metallic character. It also works well for revisiting earlier builds, correcting small marks or adding final accents once the main colour scheme is already in place.
XY acrylic colours
X-1 Black Gloss, acrylic paint, 10 ml jar
300081501€3.591 l = €359.00
X-1 Black Gloss brings a dense black tone and a reflective finish to plastic model building, with a 10 ml jar size that suits careful brush work on smaller sections and defined details. The X-Acrylic resin formula is intended for scale modelling tasks where trim, interior parts or selected exterior areas need a clean gloss surface rather than a flat look. The black gloss shade can be used to pick out contrast on cockpit elements, frame sections and other painted components where a darker finish helps visual separation. In the safety data provided for this paint range, the mixture is described as liquid, with pigments, binders and solvents, and a density of 1.0 g/ml at 23 °C. The same document identifies a flash point of 31 to 33 °C and lists the paint as flammable, so handling belongs in well-ventilated conditions and away from heat sources. For storage and workshop planning, the jar format keeps a small measured quantity ready for repeat sessions on ongoing model projects. On the bench, this colour fits jobs such as edging, retouching and finishing selected parts after main assembly or base coating. It also works where a gloss black layer is needed before further detailing on plastic model components. Paint is supplied in 1 jar with 10 ml content.
Lacquer colours
Lacquer Thinner 250ml, model paint thinner
300087077€12.591 l = €50.36
Lacquer Thinner 250ml supports model painting with one bottle for paint preparation, spray mixing and tool cleanup. The 250 ml format suits regular bench use, whether lacquer paints need a smoother brushing consistency or an airbrush mix needs a more controlled flow across small parts and larger body sections. The label states a 2:1 mixing ratio for airbrush application, giving a concrete reference for preparing lacquer paints and liquid surface primer for spray work. The thinner is also intended for Tamiya putty, which helps when surface filling and finishing need a matching solvent on the workbench. Brushes and painting tools can be cleaned of oil and paint residue with the same bottle, so colour changes and end-of-session cleanup stay within the same workflow. For heavier soiling, the printed instructions note a longer soak before rinsing with clear water. On a model bench, that means one thinner can move between mixing cup, airbrush routine and brush care without switching materials mid-session. The screw-cap bottle stores compactly beside paints, primer and putty, ready for detail painting, surface preparation and cleanup after the final coat.
TS spray colours
TS-13 Clear Gloss 100 ml, paint spray, clear coat
300085013€10.491 l = €104.90
TS-13 Clear Gloss is a 100 ml clear coat spray for model finishing, designed to add a transparent gloss layer over painted surfaces while leaving the underlying colour visible. The aerosol format supports fast, even coverage across larger sections such as bodyshells, body panels and other exterior parts where a uniform sheen matters. The formula is identified in the supplied data as a special acrylic resin spray, and the can is marked for plastics, making it suitable for plastic model work. Applied in light coats, the clear layer helps bring separate painted sections into a more consistent overall finish and can visually unify decals and colour areas under one glossy surface. The spray can format also suits broad curves and recessed shapes that are slower to cover with a brush. REACH declaration data states that this version does not contain substances of very high concern above 0.1% according to the ECHA Candidate List. For model builders working on car bodies, fairings or other display surfaces, TS-13 Clear Gloss adds the final reflective layer that completes the painted look. The can should be shaken vigorously before use and sprayed in a well-ventilated area, with attention to the hazard guidance shown for flammability and irritation. Warning! Not suitable for children under 14 years.
TS spray colours
TS-80 Flat Clear, paint spray, 100 ml lacquer
300085080€11.491 l = €114.90
TS-80 Flat Clear is a 100 ml spray lacquer for model finishing, designed to cover larger surfaces quickly and leave a flat final look over glossy paint finishes. The aerosol format suits broad body panels and shell sections where an even coat matters, and the synthetic lacquer cures in a short period of time to keep paint work progressing between stages. This spray is part of the TS paint range and is intended for model use where a smooth clear coat is needed across full surfaces rather than small brush-painted areas. One can is enough to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a useful guide when planning a full shell finish or multiple smaller projects. The formula is not affected by acrylic or enamel paints, so once the main painted assembly is complete, further detail work can be added with those paint types. For clear coating, the underlying paint should be fully cured before TS-80 is applied; the guidance given is up to 1 week to avoid cracking caused by different cure rates. Clear coating over decals should also be tested first, as some decals can be harmed by the coat. On the bench, TS-80 suits full-body finishing, panel-by-panel top coating and final surface adjustment when a glossy base needs a flatter appearance. In model car work, it gives a straightforward way to unify the finish across larger exterior areas before smaller painted details are picked out separately. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-7 Red Gloss Acrylic Paint, 10 ml hobby color
300081507€3.591 l = €359.00
X-7 Red Gloss Acrylic Paint brings a vivid red tone and a reflective gloss finish to plastic model building, giving body panels, trim pieces and small accents a clean, defined colour presence. The 10 ml jar suits bench setups where controlled amounts, repeat access and careful brush work matter during painting sessions. This X-Acrylic paint is identified as X-7 Red Gloss and is intended for plastic model building. The formula is a liquid mixture of binder, pigments and solvents, with a density of 1.0 g/ml at 23 °C. In use, the gloss surface helps light catch edges, raised details and shaped contours, so colour placement reads clearly on finished assemblies. The small jar format also fits neatly into organised paint racks, tool drawers or compact hobby cases where individual colours need to stay easy to sort and quick to reach. On the workbench, the 10 ml size suits detail passes on mirrors, spoilers, cockpit parts or highlighted body sections without opening a larger container than the task requires. Between main colour coats, correction work and final finishing touches, the red gloss shade gives model builders a focused paint option for precise, repeatable colour work on plastic parts.
XY acrylic colours
XF-63 Flat German Grey, acrylic paint, 23 ml
300081363€5.491 l = €238.70
XF-63 Flat German Grey is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the XF-63 colour code. The flat grey tone gives scale surfaces a muted, non-gloss look that suits military subjects, equipment details and technical builds where a matt finish is part of the visual character. The jar format keeps the paint easy to store between sessions and simple to bring back into use for follow-up work on the same build. On smaller components, the controlled quantity supports careful coverage on edges, panels and detail areas where colour placement needs to stay precise. The clearly stated shade name also helps when a build calls for the same tone across separate stages, whether the work focuses on base coating, detail accents or later corrections. On the bench, XF-63 Flat German Grey fits naturally into painting sequences that move between larger body sections and finer parts. It also suits projects that need a restrained grey for machinery, accessories or weathered finishes, keeping the overall look even across repeated applications.
Primers
Fine Surface Primer L, spray primer, light gray
300087064€14.791 l = €82.17
Fine Surface Primer L in light gray prepares model parts for painting with a smooth, fine undercoat that suits detailed work and larger assemblies alike. The aerosol can delivers 180 ml and is identified for use on metal, wood and model plastics, making it a practical choice when one build combines several materials. The light gray shade gives a neutral base before colour coats and helps surface work stand out during preparation. Sanded seams, filled areas and small imperfections are easier to spot on a uniform primer layer than on bare mixed materials. As a primer and pre-paint coat, it supports cleaner colour application on body panels, structural parts and scratch-built sections where an untreated surface can vary from piece to piece. The spray format also helps reach angled edges, recessed details and irregular shapes with a more continuous coat than hand application on the same geometry. On the bench, the can fits the usual sequence of surface prep, priming and painting for scale models and hobby builds. It can be used when separate metal fittings, wooden sections and plastic components need the same visual starting point before the finish coat goes on. Warning! Not suitable for children under 14 years.
XY acrylic colours
XF-64 Flat Red-Brown, acrylic paint, 23 ml
300081364€5.491 l = €238.70
XF-64 Flat Red-Brown brings a muted, earthy shade to model finishing, with a flat surface that keeps painted sections restrained rather than reflective. The 23 ml jar gives a practical amount for repeated use across detail work, larger colour blocks and follow-up corrections during a build. This acrylic paint suits controlled application on model parts where a red-brown tone adds depth, contrast or a weathered look. The shade works well for military subjects, structural details, interior sections and scenic elements that call for a subdued brown with a red cast. On smaller components, the flat finish helps preserve crisp visual separation between adjacent colours instead of adding shine that can blur the effect. The colour code XF-64 also makes it easier to return to the same shade when matching earlier work on later stages of a project. On the bench, the jar format keeps the paint ready for measured use during detail painting, touch-ups and staged finishing sessions. It fits hobby workflows where several subassemblies are painted separately, then brought together with consistent colour across the completed model.
TS spray colours
TS-26 White Gloss, spray paint, 100 ml aerosol
300085026€10.491 l = €104.90
TS-26 White Gloss brings a bright solid tone and a reflective finish to model painting, with a 100 ml aerosol format that suits broad, even coverage on plastic parts. The spray can layout supports fast colour application across body sections and shaped components where a brush can leave visible stroke patterns. The can is identified as a special acrylic resin spray within the TS paint range, giving model makers a dedicated finishing option for hobby work. Visible use guidance on the can recommends shaking vigorously and applying light coats from 25 to 30 cm, a method that helps the paint build up in controlled layers rather than flooding fine contours. The gloss white shade works well where a clean, high-contrast surface is needed for racing liveries, civil vehicle finishes or custom colour schemes. The 100 ml fill also gives enough material for repeated passes across larger shells, wings or body panels in one painting session. On the bench, the aerosol format fits projects that move from primed parts to final colour with minimal interruption. It can be used when separate model sections need a uniform white coat before decals, trim painting or display finishing, keeping the overall look crisp and consistent across matched parts. Warning! Not suitable for children under 14 years.
TS spray colours
TS-14 Black Gloss, spray paint, 100 ml
300085014€10.491 l = €104.90
TS-14 Black Gloss is a 100 ml spray paint for model finishing, combining a deep black tone with a gloss surface that suits body shells, exterior panels and other visible parts. The aerosol format covers wider areas quickly, making it useful when a model needs an even sprayed coat rather than brush marks. This TS paint is described as a special acrylic resin spray and is presented for plastic model use. Light coats can be built up across curved sections, edges and recessed areas, which helps keep the finish visually consistent on shaped parts. The can label identifies it as TS-14 and marks the net volume as 100 ml. The safety data for this aerosol classifies it as an extremely flammable aerosol under pressure, with storage and handling precautions that belong to workshop use. The same documentation also identifies the mixture as containing binders, pigments and solvents in a pressurised can. On the bench, this kind of spray paint fits body preparation, colour coating and final exterior finishing on scale builds where a gloss black surface is part of the look. It can be used when separate parts need the same colour match across the model, or when larger plastic sections call for a sprayed finish with steady visual coverage. Warning! Not suitable for children under 14 years.
TS spray colours
TS-29 Semi Gloss Black, spray paint, 100 ml
300085029€10.491 l = €104.90
TS-29 Semi Gloss Black brings a controlled black finish to model work with a 100 ml aerosol can and a semi gloss surface effect that sits between flat and full gloss. The special acrylic resin formula is made for plastics, making it a practical choice for colouring body parts, panels and other compatible model sections where an even sprayed coat matters. The aerosol format changes how the paint reaches the surface: instead of loading a brush, the colour is sprayed across wider areas in a continuous mist, which helps keep the finish more uniform on broad panels and curved shapes. Semi Gloss Black suits builds that need a darker tone with a slight sheen rather than a fully reflective look. The can is part of the TS paint range, a line used for model finishing where colour accuracy and surface appearance shape the final look of the build. The 100 ml net volume also gives useful capacity for larger shells or several smaller parts within one project. On the bench, TS-29 fits body painting, panel work and colour matching across separate components in the same build. It also works well when a project calls for black trim, darker accent sections or a consistent repaint of replacement parts on compatible plastic models. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-18 Semi Gloss Black, acrylic paint, 23 ml
300081018€5.491 l = €238.70
X-18 Semi Gloss Black brings a controlled black tone and a measured sheen to plastic model building work. The X-Acrylic formula is supplied in a 23 ml jar, giving model makers a compact paint size that suits detail painting, small subassemblies and repeat bench use. The semi gloss finish sits between flat and high gloss, which helps black parts keep visible shape and edge definition instead of disappearing into a fully matte or highly reflective surface. That makes X-18 useful on trim lines, cockpit sections, chassis details and other areas where contrast matters. The colour designation stays consistent within the X-Acrylic range, which supports touch-ups and follow-on work across longer builds. The paint is identified in the safety data as a liquid paint for brush application and has a density of 1 g/mL at 23 °C. On the workbench, a 23 ml jar is easy to keep within reach for recurring black details across cars, aircraft, military subjects and display pieces. For careful finishing sessions, the semi gloss character suits parts that need a darker technical look while still catching light on edges and contours.
XY acrylic colours
X-22 Clear Gloss, acrylic paint, 23 ml jar
300081022€5.491 l = €238.70
X-22 Clear Gloss is an acrylic paint for plastic model building that adds a transparent glossy finish in a 23 ml jar. The clear coat changes the surface look rather than the base colour, making it useful where a build needs more shine on body panels, trim sections or selected details that should catch the light differently from surrounding areas. The X-Acrylic resin paint is supplied as a liquid mixture for brush application, which helps with controlled coverage on smaller zones and careful touch-up work during finishing. The safety data sheet identifies the mixture as containing binders, pigments and solvents, and states a density of 1.0 g/ml at 23 °C. It also lists a boiling range of 80 to 120 °C and solvent content of 50 to 60%. These technical details place X-22 in the dedicated model paint category rather than a general craft coating. On the bench, this clear gloss coat suits builds that need a brighter final surface, a more polished look on selected parts or an even layer over painted sections before the next finishing step. The 23 ml size keeps enough paint on hand for repeated detailing sessions across multiple model projects.
XY acrylic colours
XF-1 Flat Black, acrylic paint, 10 ml jar
300081701€3.591 l = €359.00
XF-1 Flat Black is an acrylic paint for scale modelling work, supplied in a 10 ml jar that keeps a frequently used colour close at hand for repeat sessions at the bench. The flat black tone gives painted areas a non-reflective finish, which suits parts that need a muted, technical look rather than a glossy surface. Within a model build, black often carries visual structure, and this shade can be used where contrast, shadow definition or dark base coverage is needed. The 10 ml size is easy to store alongside other workshop colours and suits focused jobs such as cockpit sections, chassis details, trim areas or small accessories. As an acrylic paint, XF-1 fits modelling routines that rely on measured application and controlled coverage on selected sections rather than broad household painting tasks. On military subjects, automotive replicas, aircraft kits or figures, flat black helps pick out recesses and mechanical forms with a restrained finish. Kept on the bench for regular touch-up work or used as a dedicated detail colour during a full build, XF-1 supports neat, deliberate painting across many scale modelling contexts.
XY acrylic colours
XF-86 Flat Clear, acrylic paint, 10 ml
300081786€3.791 l = €379.00
XF-86 Flat Clear is an acrylic paint for model finishing, supplied in a 10 ml jar and intended for adding a flat clear coat to painted surfaces. The matte effect helps tone down gloss, so colour schemes, panel lines and small moulded details remain the visual focus when a build reaches its final finishing stage. Used as a clear layer rather than a colour coat, XF-86 supports a more uniform surface across separate painted areas and can help bring decals and markings into the overall finish. The 10 ml size suits bench storage alongside other modelling paints and gives a manageable amount for touch-ups, selected sections or full clear coverage on smaller scale subjects. As an acrylic paint, it fits naturally into hobby paint collections built around detail work, surface refinement and staged finishing. On military subjects, road cars, motorcycles or display pieces, a flat clear coat can change how the completed surface reads under room light by softening reflections across body panels and accessories. XF-86 therefore suits the final paint stage on builds where the finish itself is part of the scale impression, whether the goal is a muted service look, a toned-down race livery or a more even appearance across multiple painted parts.
TS spray colours
TS-17 Aluminum Silver Gloss, spray paint, 100 ml
300085017€10.491 l = €104.90
TS-17 Aluminum Silver Gloss is a 100 ml spray paint for model finishing, built to cover larger surfaces quickly with a bright metallic silver tone and a gloss sheen. The aerosol format helps lay colour across body shells, fairings and shaped parts in smooth passes, creating an even look on broad panels and tighter contours alike. This TS colour belongs to the special acrylic resin spray range and is intended for plastic model work. The aluminum silver shade suits full-body colour coats as well as accent areas where a reflective metal effect is needed. On car bodies, aircraft sections or mechanical details, the gloss finish gives edges and panel shapes stronger definition under light. The spray format also helps reach vents, recesses and curved mouldings that are slower to cover with a brush. For hobby benches that handle multiple subassemblies, the 100 ml can offers enough paint for repeated finishing sessions across several parts. Used for scale models, custom bodies or detail refresh work, TS-17 fits projects that call for a clean metallic surface rather than a flat coat. Light, even passes support controlled coverage on spoilers, cowls, fuselage sections and armour panels. This makes the shade a practical choice when a build needs a crisp silver finish with the speed and reach of aerosol application. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-7 Red Gloss, acrylic paint, 23 ml jar
300081007€5.491 l = €238.70
X-7 Red Gloss brings a bright, glossy red finish to plastic model building in a 23 ml jar that fits neatly into bench work focused on colour accuracy, trim painting and clean visual contrast. The liquid acrylic format supports brush application on smaller parts and detail zones where controlled placement matters. This paint belongs to the X-Acrylic range and is identified as X-7 Red Gloss, making it easy to match within planned colour schemes and repeat across multi-stage finishing work. The supplied quantity of 23 ml gives enough material for repeated use on separate sections, touch-ups or more than one build depending on coverage. The safety data names it as a glossy special acrylic resin paint for plastic model building, with binders, pigments and solvents forming the mixture. Its liquid consistency suits careful loading onto a brush for edges, recesses and defined surface areas that need a smooth coloured coat. On the workbench, the red gloss tone can be used for body highlights, painted accessories or contrast sections that need a brighter visual accent than darker base colours. During custom projects, the jar format keeps the paint ready for short detailing sessions as well as longer finishing stages where several small parts are painted in sequence.
XY acrylic colours
XF-16 Flat Aluminium, acrylic paint, 23 ml
300081316€5.491 l = €238.70
XF-16 Flat Aluminium is an acrylic paint for model building work that combines a metallic aluminium tone with a flat finish, giving painted parts a subdued metal look rather than a reflective gloss. The 23 ml jar size keeps the paint compact on the workbench while providing enough material for repeated detail work across multiple sections. The Flat Aluminium shade suits areas where a scaled metal appearance matters, such as panel sections, mechanical details or trim on vehicles, aircraft and other hobby builds. The acrylic formulation supports careful brush application on smaller parts and edges, where controlled placement is often more important than broad coverage. The flat character of XF-16 helps create a worn, technical or service-finish look on components that should read as metal without a polished shine. On a build table, the 23 ml jar fits naturally into regular painting sessions for touch-ups, accent work and consistent colour matching across separate assemblies. It also works well when a project needs the same aluminium tone repeated on multiple details, helping keep the finish visually coherent from one section to the next.
Why choose colours, paints and airbrush systems for Tamiya model kits?
One of the best things about model making is the ability to create your own designs. No matter what colour combination or pattern you have in mind, the colours, paints and airbrush systems for Tamiya model kits allow you to realise your own ideas to their full potential. What’s more, all products are easy to use and made from high-quality materials that provide optimal adhesion.
What should I pay attention to when using model making colours and paints?
To obtain the best possible coating, follow the steps below:
Preparation
Parts for model kits are made using injection moulding or thermoforming machines. For best results, you should “degrease” (i.e. clean) the surfaces before applying any paint. You can do this applying a primer, by sanding the surfaces, or by using special cleaners. The advantage of a primer is that it provides a better adhesive base for subsequent layers of paint. If you notice specs of dust or other particles after applying the primer, you can remove them very carefully with a fine piece of sandpaper (grit size #2000 or finer). Tamiya primers produce ultra-fine droplets, ensuring that engravings remain visible after application. This is the best way to ensure a good result, as Tamiya primers are designed for all Tamiya paint series.
Colour and type of paint
Before applying any paint, think about which colours and finish (matte or glossy) you want for your model. To avoid purchasing the wrong products, you should also decide whether to use airbrush paints, or whether to combine different types of paint. In addition, bear in mind that the type of primer you use has an effect on the paint. For example, if you want to paint your model red, then you should choose the pink primer for best results.
Drying time
Bear in mind that the drying time will vary depending on the type of paint. While the paint is drying, avoid touching freshly painted parts, applying another coating or doing anything else that may affect the new coat of paint. For best results, apply multiple thin coats to ensure a smooth surface.
Accessories
To obtain the best possible result, you’ll also need a set of tools to match your paint and airbrush products. These include fine brushes, airbrush pistols and adhesive templates.
Tamiya paints and airbrush products – overview of product range
Tamiya offers an extensive range of paints, airbrush colours and accessories for decorating your models. The following section provides an overview of the various product categories:
Primers
A premium primer provides the optimal foundation for subsequent coats of paint, as it smooths out any bumps and uneven surfaces and improves the adhesion of the paint. In our shop, you will find an extensive selection of primers for plastic (ABS/PS), metal ceramic and wooden components.
TS spray colours
Tamiya’s TS spray colours are acrylic-based paints that are ideally suited to spraying plastic and RC models (e.g. truck models and functional models) and only require a short drying time.
PS spray colours
PS spray colours are designed for painting polycarbonate chassis (transparent, painted from the inside), and are resistant to both oil and fuel.
AS spray colours
Tamiya’s AS spray paints were specially developed for painting model aircraft and allow you to create subtle shades and precise details.
XF acrylic colours
Tamiya’s acrylic paints are made from water-soluble acrylic resin and can be applied with a brush or airbrush pistol. XF acrylic paints have a matte finish, while X acrylic paints retain a glossy effect after drying.
Diorama texture colours
Our diorama texture colours can be used to create textured surfaces (e.g. for grainy sand, rough concrete, powdery snow or lush grass). The paints can also be mixed with Tamiya XF paints to obtain a different colour.
Lacquer colours
Made from artificial resin, Tamiya’s lacquer paints have a very fast drying time, are highly scratch-resistant, and can be applied with an airbrush pistol.
Polish, cleaners and ageing materials
Our shop also sells a range of polishes, cleaners and ageing materials, including polishes for different finishes, special cleaning utensils, and pens and powdery colours for creating a realistic weathered look.
Brushes and accessories
Under brushes and accessories, you will find an extension selection of premium brushes for applying paints and lacquers, as well as practical accessories such as mixing palettes and pipette sets.
Airbrush systems
If you’re interested in working with airbrush systems, take a look at the Airbrush section of our online store, where you will find a selection of airbrush pistols, attachments, holders and air control valves.
Colours, paints and airbrush systems – paint your models in stunning colours
With Tamiya’s extensive range of colours, paints and airbrush systems, you can customize your model with your very own designs. Be creative and make your colour dreams come true with Tamiya paints and airbrush systems!