RC truck accessories
Small parts for big vehicles: discover high-quality tyres, rims, electronics and a wide range of accessories for your RC trucks: for optimum performance and customisation.
RC truck accessories
Small parts for big vehicles: discover high-quality tyres, rims, electronics and a wide range of accessories for your RC trucks: for optimum performance and customisation.
More
Basic accessories
1:14 Drivercabine for 56314, body shell
309335393€47.99
This 1:14 driver cab body shell is made for model 56314 and gives truck builders a dedicated replacement or build component for the upper exterior section. Formed as a single white cab piece, it presents the main outer surfaces in one unified shape, making it suitable for restoration work, parts replacement or a fresh custom finish. The shell arrives unpainted, which keeps the surface ready for sanding, priming and paint application according to the chosen livery. Moulded contours define the hood, side sections and roof panel, while the cutout areas for the windshield, side windows, door opening and roof opening establish the cab layout before further detailing begins. As a standalone exterior component, it is suited to projects where the original cab needs replacement or where a separate body section is required for a specific build stage. On the bench, the formed openings and panel structure help guide alignment with the matching model during test fitting and finishing. In a workshop setup focused on scale trucks, this cab shell can serve as the basis for repainting, repair work or a second body prepared in a different scheme. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Drivercabine Parts Bag, cab component
319335808€68.99
This 1:14 Drivercabine Parts Bag supplies a replacement cab shell for model truck work where the upper body section needs to be renewed, repaired or prepared for a fresh build stage. The white moulded cab brings the exterior form back into place with shaped front contours, side walls and a roof section that establishes the vehicle's visible structure. The shell is presented unpainted, which leaves the surface open for custom colour application and project-specific finishing. Moulded recesses and panel detailing give the part a defined appearance before further components are added. Multiple holes and fixing points are built into the cab section to support attachment during assembly, while the roof opening with its cross-shaped support shows the part's prepared construction. As a dedicated cab component, it suits workshop use where an existing model needs a fresh body section rather than a complete new kit. On the bench, the part fits naturally into repair, restoration and parts-replacement tasks for 1:14 scale truck modelling. It can also serve as a spare kept ready for ongoing maintenance projects, repaint work or the staged completion of a matching vehicle build.
Basic accessories
1:14 Ford Aeromax driver cab body, model part
300335157€50.99
This 1:14 Ford Aeromax driver cab body brings the distinctive long-hood truck silhouette into a model build with a molded shell that is ready for fitting, finishing and individual detailing. The white body part shows the full cab form clearly, from the front hood line to the roof and side sections, creating a strong visual base for a scale truck project. The shell is shaped with window apertures, roof cutouts and mounting holes already formed into the molding, so the main structure is defined before paint and trim work begin. Side panel lines add surface detail that helps the cab read convincingly once assembled on a matching chassis. The molded construction also leaves room for different finishing approaches, whether the goal is a clean road truck look, a working fleet style or a more custom presentation. As a dedicated body component, it suits restoration of an existing build as well as replacement during a rebuild. On the bench, the shell supports careful test fitting, painting and detail work around the cab openings and body lines. In a completed 1:14 truck model, the Ford Aeromax form gives the vehicle a recognisable road-going character that stands out in display settings and scale transport scenes. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Globe Liner driver cab, model body shell
309335165€54.99
This 1:14 Globe Liner driver cab body shell is a dedicated replacement body part for the 56304 truck platform. The cab section restores the distinctive upper structure of the Globe Liner and gives repair, refurbishment or continuation builds the correct visual base for a matching road truck model. As a separate body component, the shell is suited to projects where the original cab has been damaged, worn or set aside for a new finish. The 1:14 scale keeps the proportions aligned with the corresponding truck format, while the cab-focused design concentrates on the part that defines the model's road-going character. For workshop use, this kind of replacement part helps maintain continuity across long-running builds and supports careful upkeep of an established truck collection. On the bench, the body shell can be prepared for fitting and finishing as part of a restoration or spare-parts plan. It also suits modelers who keep key exterior components ready for future repairs, so an existing 56304 truck can return to a complete Globe Liner appearance with the correct cab section in place. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 King Hauler Drivercabine, body shell
300335129€53.99
The 1:14 King Hauler Drivercabine body shell brings the unmistakable outline of a classic truck cab into a scale build, with a boxy front section, shaped front fenders and a large rear box compartment formed in one exterior piece. The unpainted white shell gives custom projects a clean starting point for color, trim and surface detailing. Openings for the 2 front windshields, side windows, roof section and light or accessory fitment are already defined in the molding, which helps guide finishing and installation work. The surface carries molded door lines, panel breaks and rivet-style details that stand out once paint, lining or weathering is applied. The rear section adds utility box door contours and rounded upper edges, giving the body more visual depth than a plain smooth shell. As a replacement body for 56301, it suits rebuilds where the exterior needs a fresh cab structure rather than a full new truck. On the bench, the shell supports careful masking, painting and detail picking with a clear set of molded reference lines. In a completed 1:14 display or RC truck project, the defined cab shape and rear body contours give the model a purposeful road-going presence. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 M-B Actros Drivercabine, model cab shell
319335685€53.99
This 1:14 Drivercabine M-B Actros is a replacement cab shell for scale truck builds that need the correct outer front structure again. The white molded body captures the main cab form with a large windshield opening, side window apertures and defined exterior lines that give repainting or restoration work a clean starting point. The shell is shown as an unassembled body component rather than a complete truck, so the focus stays on fit, shape and finishing potential. A large roof opening with cross braces is molded into the upper section, adding another distinct structural area for builders working on a faithful rebuild. Small mounting holes and formed attachment points are already present in the shell, which helps when matching the part to an existing compatible assembly. The side wall cutouts and front lower section continue the cab geometry and keep the overall silhouette consistent with the stated Actros designation. On the bench, the cab shell suits repair projects, replacement of worn bodywork or a fresh paint scheme on a scale lorry. In a display build, the crisp molded surfaces provide a clear base for glazing, trim details and exterior colour work that brings the truck cab back into a complete road-going look.
Basic accessories
1:14 M-B Arocs 3363 Drivercabine, model part
319335774€45.99
This 1:14 Drivercabine M-B Arocs 3363 is a dedicated model part for the Tamiya truck platform referenced as 56352. It focuses on the cab section that defines the front profile of the M-B Arocs 3363, making it a useful choice when an existing build needs the correct upper body section restored or replaced. The designation links this part directly to the matching truck version, which helps keep repair and rebuild work aligned with the intended model rather than relying on generic body components. In workshop use, a cab-specific replacement can help return a display truck or running build to a more complete appearance after wear, damage or a body refresh. The 1:14 scale keeps it consistent with the corresponding truck format, and the Drivercabine naming makes its role within the overall vehicle structure clear. It fits naturally into spare-parts storage, planned rebuilds and detail-focused maintenance sessions where the cab area is the section being renewed. For collectors and truck model builders working on the 56352 platform, this part supports accurate continuation of the original Arocs configuration.
Basic accessories
1:14 MAN TGX XLX, driver cab, for 56325
319335565€44.99
This 1:14 driver cab is made for the MAN TGX XLX 56325 truck model and supplies the key upper body section in a single dedicated part. The included contents are 1 cab, giving the build the correct front and roof structure for repair, replacement or restoration work on the specified model. Used on the designated 56325 platform, the cab restores the truck's recognizable MAN TGX XLX silhouette and brings the bodywork back into line after damage, wear or incomplete storage. The scale format keeps the part aligned with a 1:14 truck build, which matters when matching exterior proportions across the chassis and body sections. Because this is a model-specific cab rather than a universal body component, the fit and visual result stay tied to the named reference instead of relying on adaptation. On the workbench, this cab suits rebuilds of a previously run truck, completion of an unfinished project, or replacement during a visual overhaul. It also serves display-focused maintenance where the upper body shape defines the finished look of the assembled MAN TGX XLX model. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Mercedes-Benz Actros 3363 Sticker Set
319495885€26.99
This sticker set is made for the 1:14 Mercedes-Benz Actros 3363 6x4 Gigaspace RC truck and brings the finishing layer that turns painted bodywork into a recognisable scale replica. Long black stripe decals, grey trim sections and a large panel marking give the cab and body sections the printed accents seen on the full-size vehicle, creating a cleaner and more complete final appearance. The sheet also reaches into smaller areas that shape the overall realism of the build. Dashboard graphics, instrument clusters, switch panels, vent details and console markings add printed definition inside the cab, where plain moulded surfaces gain a more technical look. Multiple licence plate decals marked S-MB3363 are included alongside country identifiers and alphanumeric markings, allowing the model to carry road-style details across front and rear positions. Brand and model graphics such as Actros, Mercedes-Benz, Truck of the Year and BLUETEC markings support accurate badging across the exterior. Reflective warning panels, red triangular reflectors, ON and OFF labels, and caution markings for motor heat and rotating parts extend the sheet to functional-looking zones around the truck. Applied during the finishing stage, these printed elements help tie together cab, trim and mechanical areas so the completed model reads with more scale-specific character on the shelf or on the road. Warning! Not suitable for children under 14 years.
Rims
1:14 Metal Plated Rear Wheels, option wheel set
300056518€13.49
These 1:14 Metal Plated Rear Wheels bring the restrained, natural-metal look of full-size logistics trucks to an R/C tractor truck build. The matte metal-plated finish changes the visual tone compared with kit-standard gloss wheels, giving the rear axle area a more understated commercial-truck character when the model is parked, displayed or running. The set is intended as an option wheel set for 1:14 scale R/C tractor trucks and is designed around tires with 22 mm width. That measurement matters at the planning stage, because it keeps the wheel choice tied to a specific tire format rather than a general truck theme. The flat fin design and the detailed wheel face help capture the look of steel or aluminum wheels often seen on working trucks in logistics networks. As a replacement set, these wheels focus on appearance rather than altering the truck's basic mechanical concept. They suit refresh projects, repair work and visual reconfiguration of an existing tractor truck, especially when a build calls for a less reflective finish than the standard plated parts. On a highway tractor, fleet-style hauler or workshop rebuild, the matte surface and commercial wheel styling can shift the whole stance of the model with a single component change. Warning! Not suitable for children under 14 years.
Rims
1:14 OR RaceTruck Whl FR, wheel set, white ABS
300054964€11.29
This 1:14 OR RaceTruck Whl FR wheel set brings a clean white finish and dedicated racing truck styling to compatible RC builds. The set contains 4 wheels in a 2 front plus 2 rear layout, with molded ABS construction and rim faces that show bolt detailing and vent openings for a purposeful competition look. The white surface works in 2 ways: it can stay unpainted for a bright, crisp appearance, or it can be painted to match a custom body scheme and livery. Front and rear wheels share the same 25 mm width and 42 mm diameter, which keeps the rim format consistent across the truck. The deep barrel shape and central hub opening are designed for use on on road racing truck applications, and the set is intended for pairing with On Road Racing Truck Tires, Item 51589. Compatibility is stated for TT-01, TT-01 Type-E and TT-02 chassis models. On a bench build, the set gives a straightforward route to replacing darker or plated rims with a white alternative that changes the visual character of the truck. In a race-inspired display or a finished running model, the crisp color and molded face details stand out clearly against bold body graphics and sponsor-style paintwork.
Tyres
1:14 Race-Truck Wheel-Set, model wheels, 26 mm
300099646€31.99
This 1:14 Race-Truck Wheel-Set brings the focused look of a competition truck build into a dedicated replacement and upgrade set. The pack contains 2 front wheels and 2 rear wheels, creating a complete 4-wheel layout for model truck projects that need matching fitment across both axles. With a 26 mm wheel size, the set adds a clear dimensional reference for builders planning a consistent stance and proportion on a 1:14 race-truck chassis. As a wheel set rather than a full vehicle kit, the emphasis stays on precise fit and coordinated appearance. The front and rear allocation helps maintain the intended layout of a race-truck build, while the 4-piece configuration suits restoration work, parts replacement and custom workshop planning. The 1:14 scale makes the set relevant for truck modelling projects where visual accuracy and component compatibility matter more than generic spare parts. On the bench, the set fits naturally into rebuilds that call for a fresh wheel group after wear, or into custom projects that need a dedicated race-truck look. It also works well for keeping a matching spare set ready for future maintenance on 1:14 truck models. Warning! Not suitable for children under 14 years.
Rims
1:14 RaceTruck Whl FR, wheel set, black
300054741€11.19
The 1:14 RaceTruck Whl FR wheel set brings black racing truck rims to compatible Tamiya semi-truck builds, with 2 front wheels and 2 rear wheels shaped for the dedicated RaceTruck format. The black molding changes the visual character of the truck immediately, giving the wheel area a darker, more competition-focused finish when the model is on the track or on display. Each rim shows circular ventilation-style cutouts around the outer face and a multi-bolt hub pattern at the center, details that echo full-size racing truck wheel design. The deeper barrel profile adds visual depth once tires are mounted, and the front and rear wheel pairing keeps the setup aligned with the intended truck layout. This set is described as a black variant of the stock wheels used on the Team Hahn Racing MAN TGS semi-truck kit, making it a direct styling alternative within the same format. Compatibility is stated for TT-01E and TT-02 chassis machines. On-road racing truck tires Item 51589 are used to complete the running setup. Mounted on a race truck body, the black rims sharpen the contrast around the wheel arches and suit repaint, restoration, or replacement work on an existing chassis. The set also fits neatly into parts planning for a fresh semi-truck build where wheel color and scale-style detailing matter as much as chassis compatibility.
Basic accessories
1:14 Scania Drivercabine, model body for 56318
309335474€47.99
This 1:14 Scania drivercabine body is a dedicated replacement cab for the 56318 truck model, bringing the correct upper structure back to a build that needs a fresh shell. The focused format makes it useful for restoration benches, repaint work and repairs where the original cab has been damaged or worn through regular handling. As a separate body component, the drivercabine can be kept in reserve for maintenance cycles or used as the starting point for a new exterior finish on an existing 1:14 truck platform. The Scania form gives the model its recognizable road-going presence, while the spare-body role keeps the work centered on the visible cab section rather than a full rebuild. For collectors and builders maintaining a fleet, a dedicated replacement shell helps preserve the intended appearance of the 56318 configuration. On the workbench, this cab body fits naturally into repair, repaint and refurbishment tasks where the upper truck section needs to be renewed. It also suits long-term parts storage for larger scale truck models, ready for the moment a running or display build calls for a correct Scania cab replacement. Warning! Not suitable for children under 14 years.
Rims
1:14 Trailer Wheels 30mm BB, RC truck accessory
300056520€10.99
These 1:14 Trailer Wheels 30mm BB are option accessories for R/C tractor trucks and semi-trailers, created to shift the look away from the kit-standard gloss finish and toward a flatter natural-metal wheel style. The matte metal-plated surface gives the wheel area a more restrained, work-truck character that suits steel or aluminum wheel references on full-size tractor trailers. The set contains 2 wheels and is sized at 30 mm BB for use on compatible 1:14 scale truck builds. Rather than changing the vehicle layout, this accessory focuses on visual customization through a direct wheel swap. The deep wheel form and circular hole pattern shown in the parts design add mechanical detail around the hub area, while the flatter chrome effect keeps the finish closer to a plain metal appearance than a bright polished look. As an option part, it supports builders who want a different finish treatment on a truck or trailer already in service. Compatibility is stated for the rearmost axle on a 3-axle Tamiya Tractor Trailer and for the front wheels on Mercedes-Benz Actros #56335. That makes the set useful when matching wheel style across selected axle positions or when refining one section of a larger 1:14 road truck build with a more understated metal-plated look. Warning! Not suitable for children under 14 years.
Rims
1:14 Trailer Wheels, accessory set, 30mm hex
300056519€10.49
This 1:14 trailer wheel accessory set gives R/C tractor trucks and semi-trailers a different visual character through a matte metal-plated finish and a flat chromed look. The 30 mm hex mounting format is tailored to trailer applications, and the plain natural-metal style mirrors the steel or aluminum wheels often seen on full-size tractor truck combinations. The set contains 2 wheel units and matching hardware parts shown for the wheel assembly. Around the center hub, the wheel faces use bolt-detail styling and evenly spaced circular openings that reinforce the commercial vehicle look at 1:14 scale. Used in place of kit-standard gloss finish metal-plated wheels, these parts shift the appearance toward a more understated, work-truck presentation. The fitment note is specific: use is limited to 3-axle trailers equipped with single axle 30 mm wheels. Mounted on a compatible semi-trailer, the wheels suit display builds that aim for a plain fleet-style finish as well as running models that need a coordinated trailer update. The flatter surface treatment changes the visual balance of the undercarriage and helps a tractor-trailer combination read closer to a full-size road setup. Warning! Not suitable for children under 14 years.
Rims
1:14 V-Parts Truck Twin-Wheels, model accessory
300445258€14.49
The 1:14 V-Parts Truck Twin-Wheels add a distinct heavy-truck look to compatible model builds with a chrome-coloured finish, deep-dish rim form and a paired wheel layout in 1 assembled wheel unit. The reflective surface and drilled wheel-face pattern give the running gear a more scale-focused appearance when the truck is viewed from the side or rear. The outer face shows evenly spaced circular openings and a raised centre section, while the inner side uses a bowl-shaped rim profile with a central hub opening for mounting. A connecting centre ring joins the 2 wheel halves into the twin-wheel format, creating the visual width associated with truck rear axles in 1:14 scale. As a dedicated accessory part, this wheel unit suits repair work, replacement of worn components or detail-focused custom projects where matching axle hardware matters. Mounted on a compatible 1:14 truck model, the twin-wheel design helps complete the look of a working road tractor, display build or workshop conversion. It also fits neatly into parts-led projects where a single wheel assembly is needed to restore symmetry or refresh the finish on an existing chassis. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Warning-Sticker Set Tractor/Trailer, decal set
300056534€20.99
The 1:14 Warning-Sticker Set Tractor/Trailer brings full-size freight detail to scale truck builds with a broad sheet of markings for cab and trailer surfaces. European truck-style graphics, service labels and route identifiers give a model the visual language of commercial transport, whether the goal is a clean road hauler, a tanker-style layout or a more heavily marked working rig. Alongside warning panels and speed limit signs, the sheet provides national identification marks plus separate letters and numbers for custom numbering and vehicle-specific combinations. This opens up more than one fixed look: trailer sides, rear panels, fuel areas and service points can be arranged with different label groupings to match the chosen theme. The mix of operational notices and identification graphics helps smaller scale details read clearly once applied, especially on larger 1:14 truck bodies where open panel space benefits from realistic markings. The set is usable with any 1:14 scale tractor truck body, making it a practical choice for new assemblies and for updating an existing cab or trailer with fresh graphics. On the bench, the sheet supports careful finishing work; on a completed display or running model, the added signs, codes and warnings give the truck a more convincing long-haul presence. Warning! Not suitable for children under 14 years.
Electronic
2-Way Connector, Y-Cable for MF-Units
307255032€7.59
This 2-Way Connector is a Y-cable for MF-Units, built to create a clean split from one lead into 2 connection paths within model electronics. The red and black wire pairs make polarity easy to follow at a glance, which helps when arranging power or signal leads in compact RC installations. The cable uses flexible insulated wiring that can be guided around nearby components instead of demanding a straight run. That matters in enclosed hulls, chassis compartments, or other tight model spaces where cable routing affects both fit and access. The simple branch format also suits replacement work, maintenance, or custom wiring changes when an MF-Unit setup needs an additional linked connection. The visible wire marking shows 80°C AWM on the insulation. As a model electronics accessory, this connector fits naturally into workshop tasks such as repairing an existing wiring layout, extending a compatible branch, or preparing a neater internal cable arrangement before final assembly. It is a focused choice for RC builders working with MF-Units and related electrical installations. Warning! Not suitable for children under 14 years.
Basic accessories
3-Axle Frame L/R, model spare part for trucks
304005128€48.99
The 3-Axle Frame L/R is a dedicated spare part set for Scania R620 and MAN TGX model trucks, supplying 2 matching black metal side rails for the chassis structure. Each rail has a long, straight profile with bent side flanges and a series of round mounting holes, giving the frame section the correct base for replacement or repair work. The left and right rails are shaped as a mirrored pair, which suits their role as side members in a truck chassis layout. The hole pattern runs along the length of each piece in several sizes, allowing attachment points for adjoining components where the original frame section needs to be restored. The metal construction adds the rigid, hardware-like character expected from a structural chassis part, while the narrow channel form helps the rails sit as defined frame elements rather than flat strips. The image data shows a clean black finish that matches the technical look of scale truck running gear. This set fits projects centered on Scania R620 or MAN TGX model truck maintenance, rebuilds, or parts replacement. It suits workshop tasks where a worn, missing, or damaged frame section needs the correct left and right rail format to bring the chassis back into working order. Warning! Not suitable for children under 14 years.
Electronic
3mm MFC LED-Set, model lighting accessory
300056521€18.79
This 3 mm MFC LED-Set adds light amber illumination to compatible model truck builds, giving lamp positions a yellowish-white tone modeled on halogen lighting. The clear LED format keeps the visual focus on the installed light effect, making it suited to scale applications where the lamp housing itself should remain unobtrusive. Developed for the Tractor Truck Option Parts Series, the set is part of the latest additions to the Tamiya LED light range. The wired layout shown in the set supports integration with a multi-function lighting setup rather than a standalone loose diode fitment. The included connection format is intended for use with the Pick-Up Truck Multi-Function Control Unit MFC-02 53957 as well as the Tractor Truck Multi-Function Control Units MFC-01 and MFC-03 56511 and 56523. This makes the set a focused choice for builders matching lighting tone and control compatibility within the MFC system. In use, the 3 mm size suits model lamp positions that call for a compact light source, whether updating a truck front end, refining a scale lighting layout, or replacing an existing compatible LED. The amber output works especially well where a warmer road-going lamp appearance is preferred over the cooler bluish-white look associated with HID-style lighting. Warning! Not suitable for children under 14 years.
Basic accessories
A-Parts A1-A33 Tools, model parts for 56014
300005837€9.79
This spare parts frame is made for the M4 Sherman 56014 kit and provides the A-Parts A1 to A33 set in 1 molded runner with 40 pieces. The layout follows the named A-section structure from the original kit, which helps keep a rebuild, repair or parts replacement consistent with the intended assembly sequence. The connected sprue format keeps the individual components organized until removal, which supports careful trimming, checking and placement at the workbench. Visible elements on the frame include exterior fittings and tool-shaped components that suit military vehicle detailing, along with larger structural sections and smaller attachment points. Because the set is specified as A-Parts for 56014, it serves as a direct match when original pieces are missing, damaged or needed again during a restoration project. On the bench, the frame suits methodical sorting before assembly and gives model builders a clear reference for locating each numbered section. It also fits repair work on an already started M4 Sherman build, where a single replacement runner can restore continuity without replacing the full kit. Warning! Not suitable for children under 14 years.
Basic accessories
AA-Parts Bag 56360, model parts set, 1:24
319004976€12.49
AA-Parts Bag 56360 provides a focused source of 1:24 replacement components for model work that needs matching molded sections rather than improvised substitutes. The silver gray sprue presents the parts in a clear rectangular layout, making it easy to identify each section before cutting and fitting them into place. Visible on the runner are 2 large curved body shell panels, several long narrow side or trim pieces, 2 seat-like parts, 4 round disc elements and a range of smaller rectangular detail sections. This mix supports repair and restoration jobs across exterior and interior areas while keeping the molded finish consistent from part to part. Because the components remain attached to the frame before use, sorting and checking the needed sections can happen before any piece is removed. The molded 1:24 marking on the sprue gives a direct scale reference for matching work. On the bench, this set fits projects where an original section is missing, damaged or incomplete and a like-for-like molded replacement is needed. It also suits careful stock replenishment for ongoing model maintenance, where having the right shell, trim or detail section ready can keep a build moving without compromise.
Rims
AB Parts Widewheel Front, model wheel parts set
319335674€18.49
AB Parts Widewheel Front is a model wheel parts set for the MB Actros 56335, supplied as 2 chrome-plated components on a sprue with a separate ring detail. The deep-dish rim form, oval ventilation openings and molded lug pattern give the assembled truck a distinctly heavy-duty wheel face with a bright plated finish. The parts are shown unassembled, which keeps cleanup and fitting aligned with the build process of the base model. The additional circular insert with evenly spaced holes introduces another visible layer around the hub area, adding definition that stands out under display lighting. Because this set is specified for the front widewheel position on the MB Actros 56335, it supports an accurate visual match where the truck's steering axle needs the correct rim style rather than a generic commercial wheel. The plated surface also suits restoration of an older build where original front wheel parts are no longer in clean condition. On the bench, these parts fit naturally into a rebuild, parts replacement or detail-focused refresh of the truck model. Once installed, the reflective finish and crisp rim contours give the front end a more complete road-going look in parked display scenes, workshop dioramas or cab-focused shelf presentation. Warning! Not suitable for children under 14 years.
Basic accessories
Aeromax Grille P-Parts, model accessory, chrome
300115234€28.49
This Aeromax grille P-Parts set is a model accessory made for 56309 and focuses on the bright front-end details that shape the finished truck's character. The chrome-plated frame holds multiple molded pieces, including large curved grille elements and smaller matching trim components, so the reflective finish stays visually consistent across the fitted sections. The parts arrive attached to a single sprue, which helps keep the individual components organised during the build or during replacement work on an existing model. Patterned panels, narrow bars and smaller mounting-style pieces add further surface definition where the Aeromax design calls for crisp metallic accents. The molded contours and plated finish bring out edges, openings and decorative shapes that can otherwise look flatter in uncoated form. This set suits repair work on 56309, completion of an unfinished build, or the replacement of worn grille sections after handling and display. On the bench, the grouped layout makes it easier to identify each section before cutting and fitting. Once installed, the chrome details give the front area of the Aeromax model a sharper, more finished presence that matches the style of a highway truck build. Warning! Not suitable for children under 14 years.
Basic accessories
Air Intake M-B Arocs, model parts set, black
319225180€19.99
This air intake parts set for the M-B Arocs supports repair, replacement and detail work on an existing model build. The black injection-moulded runner carries multiple shaped components in one matched frame, giving rebuild projects a consistent finish across visible exterior sections. The sprue layout shows vented grille-style panels, curved housing pieces, bracket and mount elements, circular collar parts and 2 larger tubular intake sections with ribbed shaping. That mix helps cover both prominent body details and the smaller connection points that support a tidy installation. Keeping the parts attached to the runner until use also helps with identification during workshop preparation and staged assembly. The moulded black finish suits applications where matching colour and surface appearance matter during restoration work. On the bench, the set fits naturally into maintenance tasks such as replacing damaged intake details, refreshing a used truck body or completing a project that is missing original components. It also serves as a practical reserve for long-term model upkeep, where having the correct shaped parts ready can keep a build visually complete and mechanically tidy. Warning! Not suitable for children under 14 years.
Electronic
Back Lamp J18, model accessory, LED cable set
307175099€10.99
The MFC LED Back Lamp J18 is a model accessory built around a pre-assembled rear light lead, combining an LED back lamp connection with bundled wiring for a neat electronics fit. Twisted grey and white wires run into a compact transparent connector, creating a clear, organised layout that suits detailed model installations where space is limited and cable routing matters. The lead is gathered at the centre with black tape, which helps keep the wire run together while the lamp connection is positioned in the model. This kind of ready-made harness is useful when an existing lighting setup needs a matching replacement rather than loose wire and connector work from scratch. The transparent plug end gives a direct visual reference during connection, and the slim wire format suits enclosed body sections, chassis areas or scale vehicle interiors that carry lighting functions. On a workbench, the J18 can serve as a replacement part during maintenance or as a dedicated rear light lead in a compatible build. In an installed model, it supports the visual finish of a vehicle with functioning back lamp electronics while keeping the wiring run compact and orderly. Warning! Not suitable for children under 14 years.
Basic accessories
Battery Mount Scania 56371, model spare part
319115568€29.99
This battery mount is an SS Parts replacement for Scania 56371 and serves one clear task within the model: holding the battery in its intended position. As a dedicated spare part, it supports accurate maintenance work when the original mount is missing, worn or damaged. The part is identified in the source data as Battery Mount Scania 56371, which makes it a direct match for servicing that specific model reference rather than a general-purpose accessory. Using the correct replacement part helps keep repair work focused on the affected area and avoids changing larger assemblies when only one mounting component needs attention. That makes it useful for routine upkeep, restoration projects and workshop stock where exact model-specific parts matter. In practical use, this spare part fits naturally into repair sessions, rebuilds after wear, or planned maintenance on Scania 56371. It also suits collectors and builders who keep selected replacement components on hand for future servicing of the same model.
Basic accessories
BB Parts Clear Side skirt S770, model parts set
319007361€8.19
BB Parts Clear Side skirt S770 is a model parts set built around clear molded body-detail components for a matching S770 assembly. The translucent sprue format keeps the parts connected and visible at a glance, so the layout can be checked before any section is removed for fitting. The frame carries numbered groups from 1 to 5, including 4 smaller rectangular inserts on the left and 4 longer curved side elements on the right. This arrangement helps separate the different shapes by function during the build and supports more accurate placement when the body details are added. The molded runner structure keeps each section organized until use, which is especially useful when several similar pieces need to be handled in sequence. The clear material also suits builds where body trim, side detailing or transparent styling parts need a defined finish rather than an opaque look. On the bench, the set works as a focused source for replacement parts, repair work or a fresh body-detail stage within an ongoing model project. The compact sprue layout also makes it practical to inspect, trim and prepare each section in order before the final body assembly continues. Warning! Not suitable for children under 14 years.
Basic accessories
Bevel Gear Shaft, spare part for model 56313
309804180€6.69
This spare part set provides 2 bevel gear shafts for model 56313 and focuses on a precise mechanical role inside a driven assembly. Each piece combines a silver conical gear head with multiple teeth, a circular flange and a short dark shaft with a square drive end, forming a compact component for angled gear engagement. The bevel gear shape indicates use where rotational force changes direction through meshing gear faces rather than a straight spur gear path. The flange supports defined positioning of the part within the surrounding mechanism, while the square shaft end points to a positive drive connection with the matching receiving component. The metal construction shown in the part image suits a technical replacement task where tooth form and shaft geometry matter for correct operation. As a 2-piece set, the pack supplies a matched pair for maintenance or repair on the specified 56313 model. This kind of replacement part fits workshop sessions centered on restoring a drivetrain, gearbox or axle section after wear or damage. It also suits planned servicing when a model is being inspected, rebuilt or returned to running condition with the correct dedicated hardware for the named application. Warning! Not suitable for children under 14 years.
Basic accessories
C Parts Chassis Parts, RC spare parts set
319008208€11.79
C Parts Chassis Parts brings together a focused selection of molded chassis components for Tamiya model vehicle maintenance and rebuild work. The set is supplied as black injection-molded parts on a sprue, a format that keeps small sections connected and easy to sort before they are clipped free for installation. The visible component mix covers several mechanical shapes used around a chassis assembly, including bracket forms, rounded housings, linkage-style pieces and mounting sections. That variety matters when a repair calls for matching geometry rather than a generic substitute, especially where moving assemblies and fixed mounting points meet. The black molded finish gives the set a consistent look alongside existing chassis sections. Because the parts remain grouped on the runner, each piece can be checked against the build step or repair task before removal, which helps keep workshop handling tidy. This spare parts set suits bench repairs, partial rebuilds and the replacement of worn or damaged chassis sections after regular RC use. It also works as a practical stock piece for hobby setups that keep key maintenance parts ready between running sessions and workshop servicing. Warning! Not suitable for children under 14 years.
Basic accessories
C-Parts Crossmember 56323, model spare part
309005933€13.49
C-Parts Crossmember 56323 is a model spare part shaped for structural use within a vehicle assembly. The black molded piece shows a defined crossmember form with multiple circular mounting holes, recessed screw seats and raised posts that help place matching hardware and adjoining sections in the intended positions. The part is presented in front and rear view, making the geometry easy to identify against an existing build before installation. Triangular side bracing and the central bridge layout indicate a load-bearing role within the assembly, where stable connection points matter for chassis-related fit. The visible numbering and molded marking on the sprue section support part recognition when comparing replacement components during workshop sorting or rebuild planning. As a dedicated spare part, it suits repair work, restoration of an older model, or replacement of a worn or missing frame section. Used during maintenance or reassembly, the crossmember helps return a model vehicle to its intended structure by restoring key screw locations and connection geometry. It also serves as a practical reference piece when checking orientation, hole spacing and mounting position against the surrounding assembly. Warning! Not suitable for children under 14 years.
Basic accessories
C-Parts Steering Mounting Set, model spare parts
300005564€27.49
This C-Parts steering and mounting set brings together molded replacement pieces for 2 axle truck assemblies in one clearly organized sprue. The black and metallic silver components are arranged on the runner for straightforward visual reference, making it easier to identify the needed section before removal and installation. The set is described as C-Parts for steering and mounting points, with multiple numbered references visible on the sprue from 4 to 19. Larger frame-like sections sit alongside smaller brackets, linkage-style parts, bushings, spacers, clamps and ring washers, giving the set a technical layout that supports instruction matching and targeted replacement work. The molded runner also carries the C identifier and TAMIYA marking, which helps confirm the correct parts group during workshop sorting. As a spare-parts supply in the Models & Accessories range, it fits practical bench use where worn, missing or damaged molded sections need to be replaced with matching components. On the workbench, the organized sprue format helps keep small pieces together until the required section is selected for the repair. For ongoing truck maintenance, this set supports clean parts identification, orderly storage and accurate preparation before assembly steps begin.
Basic accessories
Cabin Interior L Parts, model accessory for Actros
319115369€20.49
This cabin interior L parts set is a model accessory for the M-B Actros 56335 and focuses on the details that define the inside of the cab. The white molded sprue carries a dashboard, 2 front seats, a steering wheel, long trim elements and smaller control parts that support a more complete interior during assembly. The runner layout keeps each component attached and easy to identify before cutting and fitting. A rear interior panel and narrow side pieces with round mounting holes add further structure to the cabin area, while the smaller lever-like parts extend the control detail beyond the main dashboard and seating. Because the set concentrates on the cab rather than the body shell, it suits builds where internal features remain visible through the windows or open access points. On the workbench, the parts support a focused detailing stage that can change how the finished truck cab reads at close range. Painted and installed to match the chosen build, the interior pieces help create a more convincing driving environment for display, photography or a restoration of the original M-B Actros 56335 configuration. Warning! Not suitable for children under 14 years.
Basic accessories
Cabin Sidepanel S770, model spare part set
319115548€16.79
This spare part set centers on the cabin bodywork for the S770 and provides shaped replacement sections for model repair, restoration or continued assembly. Large side walls with window openings and curved contours define the cabin form, while separate narrow strips and mirrored sections support a clean fit across the body shell. The white molded pieces are supplied on sprues, so each section stays clearly separated until trimming begins. Visible numbering on the frame, including positions such as 2, 3, 4 and 6, helps identify the correct parts before fitting. Wheel-arch cutouts and long side elements point to use on a truck-style or van-style cabin structure, where panel shape matters for matching the original body lines. The unpainted finish also leaves room for sanding, priming and colour matching when replacing worn or damaged exterior sections. On the bench, this set suits careful rebuilds where a cabin side has been marked, broken or lost. It also supports ongoing projects that need fresh body panels before final paint and detail work, keeping the exterior layout consistent across the assembled model. Warning! Not suitable for children under 14 years.
Electronic
Cable Bag for 56313, model accessory, MFC-01/03
309400042€134.99
The Cable Bag for 56313 is a model accessory created for MFC-01/03 LED and cable organization, giving wiring inside the model a more controlled layout. Used with the 56511 application named in the data, it provides a dedicated place to gather leads that would otherwise sit loose around the electronics area. This accessory is centered on cable handling rather than decoration. Grouping LED leads and related wiring in one bag can help keep the installation area clearer when multiple connections run through the chassis or body section. That makes it easier to distinguish routed cables from neighboring components during fitting or later checks. The bag format also suits models that use the MFC-01/03 system, where lighting cables and control leads benefit from being kept together instead of spreading across the interior. During workshop setup, refitting, or electronics maintenance, the cable bag supports a neater internal arrangement and a more orderly view of the installed wiring. It fits naturally into model builds that use lighting functions and cable-based control layouts, especially where several leads need to stay grouped in a defined position. Warning! Not suitable for children under 14 years.
Basic accessories
CC Parts Clear Taillights S770, model accessory
319007362€7.39
CC Parts Clear Taillights S770 focuses on one of the small details that gives a scale build a more finished rear view. The set provides molded taillight components for the S770, making it useful for replacement work, restoration projects or a fresh body finish where the rear light area needs clean, defined parts. The parts arrive on a red sprue frame, which keeps each section organized before removal and helps identify the molded shapes during assembly. The visible material marking indicates PSPS, giving a concrete reference for the composition of the frame and parts. This kind of accessory suits builders who refine body details step by step rather than leaving rear sections plain or incomplete. It can support a tidier result on a rebuild, a repair, or a body shell that is being finished with renewed exterior trim. On the bench, the set fits naturally into careful model preparation, whether replacing missing light pieces or completing a body with sharper rear detailing. In a display setting, the taillight area gains clearer visual definition that helps the finished model read more convincingly from the back. Warning! Not suitable for children under 14 years.
Basic accessories
CC-Parts Bag CC, model parts set, chrome finish
319004946€14.49
CC-Parts Bag CC brings a single chrome-colored sprue into model work where matching plated details matter. The rectangular frame holds multiple small mirrored components together in one set, giving builders a clear starting point for replacing missing sections or completing a specified assembly stage with the correct finish. The molded parts are presented as CC-Parts Bag CC x1 and correspond to reference 56360 in the supplied data. The chrome-colored surface creates a reflective metallic appearance that suits trim and accent areas where a plain molded finish would look different from the surrounding section. Because the pieces remain attached to the sprue before removal, each component can be checked in place and separated only when the build reaches that step. This format also helps keep small parts grouped during bench work and parts sorting. The set fits naturally into repair tasks, restoration of an earlier build, or a fresh assembly that calls for this exact frame. On the work surface, the mirrored finish stands out clearly against tools and cutting mats, helping visual checks before fitting and placement. This is a focused replacement and supply component for model building rather than a complete kit.
Basic accessories
Chassis LR Set, model spare part, shrink packed
314305672€63.99
The Chassis LR Set is a model spare part shaped as a long, slim black metal rail with a straight profile and a series of pre-drilled holes. That layout supports accurate positioning inside a compatible chassis assembly, where a replacement strip needs defined fixing points and a rigid linear form. Its narrow rectangular shape suits structural use rather than decoration, making it relevant for repair, maintenance, or restoring an existing build to working order. The dark metallic finish and perforated construction indicate a part designed to be fastened into place with matching hardware from the compatible model system. Because the holes are distributed along the length of the rail, the strip can align with established mounting positions in the chassis area instead of relying on improvised drilling or reshaping. Shrink-packed supply keeps the part contained in storage among workshop spares until it is needed for a rebuild or replacement job. This kind of chassis component fits naturally into bench work where worn, bent, or missing structural parts need to be exchanged with a matching replacement. It also suits planned maintenance on a model that is being stripped down, checked, and reassembled with fresh chassis hardware.
Basic accessories
Chrome Parts Set, model accessory sprue, black
310115874€19.49
This chrome-plated parts sprue adds bright exterior detailing to a scale truck build, with a reflective finish that gives the front section and side accents a more defined, realistic look once the pieces are fitted in place. The runner layout keeps the plated components grouped together, making it easier to identify each section before removal and assembly. The visible set centers on a large front grille with a diagonal bar and emblem area, supported by 2 large headlight assemblies, smaller lamp units and further trim pieces. Mirror or marker-style parts and side grille or trim panels broaden the plated treatment across more than one area of the body, so the finish does not stop at the nose. Because the parts are supplied unassembled on a single rectangular sprue, the layout also helps with part checking during a careful hobby build. The black base specification in the source data distinguishes this version from other finish variants. On the bench, the plated runner suits builders replacing worn trim, completing a detailed truck body or refining the visual contrast of a custom project. Once installed, the bright accents work especially well on display builds where grille depth, lamp framing and small exterior highlights are meant to stand out at close range. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Glass Panes S Parts for Model Assembly
319115552€13.79
S Parts Clear glass panes 770S adds a dedicated transparent pane set to compatible model assembly work, with molded glazing sections supplied together on a sprue for organized handling at the bench. The set is shown as 6 numbered parts, which helps separate each insert by position before removal and fitting into the body structure. The visible pane shapes include 2 matching curved sections, 1 rounded rectangular insert, 2 angled rectangular panels with cutouts, and 1 taller rectangular panel. This mix supports model areas that need different window outlines rather than a single repeated shape. The transparent molding keeps the focus on visible glazing detail once the compatible build is assembled. Numbering on the sprue also helps track each section during trimming, test fitting, and placement, especially when several openings sit close together on the same body shell. On the workbench, this kind of parts set suits repair of a used build as well as completion of a fresh assembly where the correct clear sections are needed for the body. The sprue format keeps the panes grouped until use, so each section stays easier to sort, compare, and fit during the build process. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Headlight Parts Set for Model Vehicle Bodies
319007360€10.29
This clear parts set adds transparent light and glazing details to a model vehicle body, bringing sharper definition to the finished shell through molded lenses, window-style panels and small exterior inserts. The AA sprue holds multiple numbered components in clear material, while the matching sheet shows numbered sections and placement guidance that help keep each stage of body finishing easy to follow. Small lens-shaped pieces can be fitted where headlight or indicator details are needed, and the larger curved panels suit window or glazing areas that benefit from a separate transparent part instead of painted imitation. The runner includes markings such as AA, 1, 2, 3, 4, 7, 8, 9, 11 and 12, making it easier to match parts to the guide during assembly. The printed sheet also shows orientation examples for a larger rectangular panel section, supporting accurate placement when left and right positions or front and back alignment matter. Together, the clear sprue and guide sheet support a more precise exterior finish on compatible model bodies. This set suits body detailing sessions where light covers, windows and trim elements are added after painting. It also works well when replacing worn clear pieces or refining a shell with more distinct transparent accents and cleaner separation between painted and glazed areas. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Light Bar S770, model spare part insert
319007363€9.29
Clear Light Bar S770 is an EE Parts replacement frame with transparent molded sections for model maintenance, restoration, or parts replacement. The attached clear pieces sit on a single sprue, giving a tidy overview of each shape before trimming and fitting begins at the workbench. The frame image shows several small rounded transparent parts and larger elongated inserts, while the molded marking E2 and the material marking >PS appear directly on the sprue. A separate technical diagram identifies the EE part layout with grouped positions marked 1 and 2, adding a concrete reference for matching the correct section during repair or rebuild work. This kind of spare part suits projects where worn, missing, or damaged clear sections need to be replaced with parts that follow the original molded form. Used during a careful rebuild, the transparent inserts can restore defined light details and clean surface openings on a compatible model. The single-frame format also helps keep all sections together until the required piece is selected for trimming, test fitting, and final installation. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Parts Light Bar Model Accessory Sprue
319000848€12.99
This clear parts sprue is made for Light Bar 56348 model work and provides a set of transparent molded components for replacement, repair or completion tasks. The frame layout keeps each piece attached at defined gate points, so the parts stay organized until trimming and fitting begins at the workbench. The sprue carries several distinct clear shapes, including circular lens-style pieces, narrow rectangular inserts and rounded rectangular panels. That mix supports detail work on a matching model assembly where light covers or other transparent sections need to be restored with parts that match the original molded form. The transparent finish helps preserve the crisp appearance expected in scale builds, especially where visible lighting or panel details sit on the exterior. As a dedicated accessory part set, it suits careful maintenance of an existing build as well as completion of an unfinished project. On the bench, the frame can be clipped section by section to keep handling controlled while each insert is prepared for placement. It fits naturally into repair sessions, spare-parts storage and planned restoration work where a specific clear component is needed instead of replacing a larger assembly. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Parts M-B Actros 56335, model accessory
319000498€11.99
This clear parts set is made for the M-B Actros 56335 and provides the transparent molded sections used where glazing and light details define the finished model's look. The sprue includes a large curved windshield-style section, broad side window pieces and several smaller clear inserts that suit lamp or marker positions, giving a rebuild or replacement job the exact type of parts this area requires. The transparent runner format keeps each piece formed to its intended shape, which matters when cab contours, window openings and lens recesses need a clean visual match. Larger panes handle the main glazed areas, while the smaller round and rectangular sections cover the finer details that complete the front and side appearance. The molded markings on the frame identify it as the AA parts set and show the clear material type used for these components. This accessory fits naturally into repair work, restoration of an older build or completion of a model that needs fresh clear sections after wear or loss. On the bench, the grouped layout helps with sorting before cutting, test fitting and final installation on the M-B Actros 56335. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Parts Sprue for MB Arocs Model Kit
319000957€10.99
This clear AA parts sprue is made for the MB Arocs / 56352 and provides the transparent molded sections that give a scale truck build its finished glazing and light detail. Larger clear pieces on the runner form the main screen or window areas, while smaller round and rectangular sections add the crisp transparent accents that solid body panels cannot reproduce. The parts remain attached to a single molded frame for identification before removal, with visible numbering on the sprue to support part matching during assembly. The material marking >PSPS indicates polystyrene, a common choice for sharply molded clear components with defined edges and consistent fit in model construction. The layout groups multiple shapes on one runner, including curved sections, narrow inserts and plate-like transparent pieces that serve different exterior detail positions on the model. This set works as a practical replacement when original clear sections are missing, scratched or incomplete, and it also supports restoration of an unfinished MB Arocs build. On the bench, the transparent parts help restore the visual contrast between painted bodywork and clear glazing, while the smaller lens pieces sharpen the look of lamps and signal details once fitted in place. Warning! Not suitable for children under 14 years.
Basic accessories
D-Parts Batterybox, model truck spare parts
300005565€23.99
D-Parts Batterybox is a spare-parts set for 2-axle and 3-axle truck models, supplying the batterybox-related components needed when a build calls for replacement or completion of this specific section. The molded parts are arranged on sprues, making each shape easy to identify before cutting and fitting them into place. The set includes multiple glossy molded pieces with distinct structural forms, including bracket-style elements, cover-like sections and a longer central support piece with cylindrical mounting posts, elongated slots and raised platforms. Visible molded numbering such as 2, 3, 4, 6 and 8 helps separate the individual components during workshop preparation. This layout supports careful repair work on existing truck models and also helps keep parts grouped when rebuilding a batterybox assembly from scratch. On the bench, the sprued format makes it easier to compare shapes, check orientation and prepare each section in sequence before installation. For truck model projects with missing or damaged batterybox components, this set restores the correct hardware area with parts made for the stated 2-axle and 3-axle applications.
Basic accessories
DD Parts Bag 56366, model spare parts set
319006949€11.79
DD Parts Bag 56366 is a model spare parts set centered on clear molded components for repair, replacement and careful restoration work. The transparent sprue carries multiple small parts in one organized frame, making it easier to identify matching shapes before trimming and fitting them into the intended assembly. The set includes several circular dome-like pieces in different sizes as well as rectangular plate-like sections with raised central details and small holes. This mix supports targeted replacement where a build needs the correct transparent insert or a shaped panel section rather than a generic substitute. Because the parts remain connected to the molding frame, each piece stays separated and visible until use, which helps during planning, comparison and step-by-step removal with a side cutter or hobby knife. The clear finish also suits applications where light covers, windows or similar visible details need to retain their original look. On the workbench, this set fits naturally into repair sessions, part sorting and ongoing maintenance of an existing model. It also supports rebuild projects where a damaged assembly needs specific molded pieces to restore the intended appearance and fit without replacing larger sections unnecessarily.
Basic accessories
Decal Bag for 56020, model accessory, Leopard 2 A6
309400123€11.69
This decal bag is a model accessory for the 56020 Leopard 2 A6 Main Battle Tank and focuses on the markings that give the finished vehicle its specific identity. The waterslide sheet carries Bundeswehr-style registration plates, tactical numbers, insignia and unit graphics that turn large body panels, turret sides and smaller exterior sections into a more convincing scale replica. Alongside the exterior markings, the set also includes warning decals for the track area and printed reference labels for internal connector points. The warning graphics reproduce the caution markings placed near the rotating tracks and drive sprocket on the full-size vehicle. The connector sheet labels positions such as J5, J12, J13, J14, J16, J17, J18, J19, J20, J22 and J24, with functions including output gun, convoy marker, GFS harness, speaker, machine gun, turret motor, throttle motor, recoil motor, steering motor and flash unit. This gives the accessory value beyond surface finishing by supporting organized identification inside the model. During a fresh build, restoration or replacement job, the sheets help return worn markings and reference labels to the tank with clean, model-specific detail. They also suit careful refurbishment work when a Leopard 2 A6 body, turret or internal layout needs the original printed information restored after use or repair. Warning! Not suitable for children under 14 years.
Basic accessories
Diff. Gear Bag, RC spare parts for 56314
309400028€56.99
This differential gear bag is a dedicated RC spare parts set for model 56314 and centers on the mechanical parts that keep drivetrain power moving through the axle assembly. The assortment shown includes metal bevel gears, differential housings or covers, cross shafts, outdrives and long splined shafts, giving a focused replacement set for service work on the differential section. The bevel gear layout supports the transfer of torque between connected drivetrain parts, while the cross shafts and smaller pinion gears form the internal differential action inside the housing. Cup-style outdrives with cross-pin holes connect the assembly to the next driven parts in the system, and the threaded shaft ends support secure installation where the original hardware layout requires it. The machined metal finish visible across the set points to precise tooth profiles and clean mating surfaces, both important when replacing worn internal transmission parts. On the workbench, this set suits rebuilds after heavy running, routine maintenance, or the replacement of damaged gears inside the axle or gearbox area. It also helps keep a compatible model ready for continued use when a full differential refresh is needed rather than changing single parts one by one. Warning! Not suitable for children under 14 years.
Basic accessories
Diff. Shaft A & B, model spare part for 56301
309805458€13.49
Diff. Shaft A & B is a dedicated spare part for model 56301 and is intended for targeted replacement within the matching assembly. The set contains 2 metal shaft components with distinct end profiles, making it suited to a specific mechanical position rather than general-purpose use. The shafts are shown with threaded ends and machined sections that support accurate seating with the corresponding hardware in the designated model. One component features a rounded end section, while the other uses a narrower pin-style end, indicating 2 different roles within the same mechanism. This defined geometry matters when restoring a worn, bent or missing original part, because the replacement needs to match the existing layout and connection points already built into model 56301. As a model spare part, this set fits maintenance work, repair jobs and parts replacement during a rebuild of the specified vehicle. The compact metal components are easy to store with workshop spares and useful to keep on hand when a drivetrain or linked mechanical section needs the correct shaft pair for continued operation. Warning! Not suitable for children under 14 years.
Basic accessories
Drive Sprocket (2), model spare part for 56019
309805943€35.99
This Drive Sprocket set supplies 2 matching replacement parts for 56019 and focuses on one of the key mechanical contact points in a tracked model assembly. The silver-coloured pieces use a circular toothed rim and a spoke-style inner structure, creating the distinctive technical form expected from drive components that engage with a track system. The hub-shaped centre section adds further definition to the part geometry, with a hollow interior that reflects its role as a fitted mechanical component rather than a decorative add-on. The pair format is useful where both sides of a running system need matching parts or where one spare is kept ready for later maintenance. The studio presentation shows the parts from upright and angled views, making the toothed profile, drum-like centre and open inner detailing clearly visible. As a model spare part, the set is intended for accurate replacement on 56019 rather than general cross-range use. In workshop use, the sprockets suit repair jobs where worn or missing drive parts need to be exchanged with matching components. They also fit restoration work on an existing tracked model, where keeping the original mechanical layout matters as much as the finished appearance. Warning! Not suitable for children under 14 years.
Basic accessories
E-Parts Coupler Plate Servo Saver Truck Parts
300005471€23.99
This E parts set supplies coupler plate and servo saver components for compatible truck model assemblies, giving worn or missing mechanical pieces a direct replacement path. The black molded parts arrive on a single sprue, where each shape remains easy to identify before removal and fitting. Visible numbering on the runner helps separate the individual components during workshop preparation, especially when several small mechanical pieces are handled at once. The sprue format keeps the parts organized until assembly begins, which supports cleaner sorting on the bench and reduces mix-ups between similar shapes. The set is aimed at maintenance and repair rather than decoration, with the focus placed on functional hardware used in steering and coupling-related areas. The molded layout also makes it easier to inspect each piece for shape and fit before installation. On a repair bench, this set supports the replacement of damaged truck parts after regular running or long storage. It also suits planned rebuilds where original steering-related pieces need to be refreshed so the model can return to service with the intended mechanical layout.
Electronic
Electric TR Torque-Tuned Motor 33T RC Motor
300056526€58.99
The Electric TR Torque-Tuned Motor 33T is a brushed upgrade motor developed for 1/14 scale R/C tractor truck models, where strong pulling power and controlled running matter more than outright speed. Its low-turn, high-torque setup helps the drivetrain hold pace in top gear with less speed drop, giving tractor truck runs a heavier, more realistic character when the model is moving under load. The motor is equipped with ball bearings, which support smoother rotation and reduce wear at the shaft supports during repeated use. At 7.2 V, it reaches 12,500 rpm without load and delivers a maximum torque of 39.2 mN-m, with an operating range of 6.6-7.2 V. The tuned response also supports more precise control at lower velocities, which is especially useful when lining up a trailer, easing away from a standstill, or managing steady throttle inputs over longer sessions. Lower power consumption helps extend driving time between charges compared with a more power-hungry setup. Installed in a 1/14 scale tractor truck, this motor suits runs that focus on towing, top-gear cruising and measured acceleration rather than high-speed bursts. It also fits maintenance-minded hobby use, as the brush design can be serviced and the bearing-equipped layout is built for regular running and periodic upkeep. Warning! Not suitable for children under 14 years.
Basic accessories
F Parts Highroof M-B Actros 56335 model parts
319000500€36.99
This F Parts set is identified for the Highroof M-B Actros 56335 and serves as a dedicated model supplies component for that truck project. The naming points to the high-roof cab section, which helps keep a rebuild aligned with the intended form of the original design rather than relying on generic substitute pieces. Within a workshop setup, a clearly designated parts set like this supports more accurate maintenance planning for an existing build. The F Parts label distinguishes this group from other component sections in a larger model structure, while the 56335 reference ties it to a specific Actros variant named in the data. That makes the set useful for replacing worn or missing cab-area elements, preparing a stored kit for completion, or keeping a matching spare on hand for future repair work. On the bench, this kind of dedicated replacement part helps keep truck model projects moving when one section needs attention. It fits naturally into restoration, rebuild, and long-term upkeep tasks centered on the Highroof M-B Actros 56335. Warning! Not suitable for children under 14 years.
Basic accessories
F-Parts Axle 56319, model spare parts set
309005896€33.99
F-Parts Axle 56319 provides a focused spare parts set for model vehicle maintenance, with black injection-molded components supplied on sprues for clean identification before installation. The layout supports precise replacement work when a build needs matching structural sections instead of a complete new assembly. Visible in the set are several distinct molded forms, including 2 long rail-style pieces, 2 curved arm-like sections, smaller linkage or mount-style parts, a bracket pair, 1 upright cylindrical piece and 1 larger rectangular housing. Number markings such as 5 and 6 appear on the sprue, adding a practical reference point while sorting and preparing the parts. The molded format keeps edges and connection points intact until each section is removed, which helps maintain order during bench work. The set is suited to repairs where the original geometry of a specific section matters for alignment and placement. On a workshop table, the sprue format makes it easier to compare shapes before cutting, test the intended position of each section and replace worn or missing components with matching forms. For ongoing upkeep of an existing model, this set supports selective repair work without replacing unrelated assemblies. Warning! Not suitable for children under 14 years.
Basic accessories
F-Parts Bag(Fx2), model spare parts set
319008213€10.49
F-Parts Bag(Fx2) is a dedicated spare parts set for compatible Tamiya model or RC applications, supplied as 2 identical black sprue frames with F marking. The layout keeps each molded component attached to the runner until removal, which helps separate small pieces and makes bench work easier to track. Across the 2 frames, the set provides a repeated group of numbered parts visible on the sprues, including curved arm-like pieces, a long narrow bar with circular holes at both ends, 3 small cylindrical bushings or spacers, 2 rectangular mounting blocks and a larger central bracket or holder piece on each frame. The molded numbering beside the parts supports identification during assembly or replacement, especially when a manual or existing build refers to individual part numbers. The duplicated frame format also helps when both sides of a mechanism use matching components or when worn pieces need like-for-like replacement. This set fits naturally into repair, restoration and ongoing maintenance work on a compatible Tamiya build. It also serves as a practical source of original-style replacement pieces when an existing assembly needs the F frame rather than a mixed assortment of generic hardware.
Basic accessories
F-Parts Suspension Brace, Truck model spare parts
300005472€22.49
F-Parts Suspension Brace is a replacement parts set for truck model maintenance, supplied as 1 molded sprue with multiple structural components on a single runner. The black injection-molded frame groups the parts in one place, making it easier to identify and separate the required pieces during a repair or rebuild session. The set covers suspension and brace functions, with shapes intended for mounting, linking and supporting sections within a compatible chassis assembly. Larger bracket-style pieces, curved arm forms and smaller fittings provide the kind of hard parts typically needed when an existing build needs fresh structural hardware rather than cosmetic changes. Because the parts stay attached to the runner before use, sorting and preparation remain clear at the workbench. This format also helps confirm that the full molded set is present before installation begins. F-Parts suits rebuild work, accident repair and routine replacement of worn chassis sections in truck model projects. On a bench beside the main assembly, the sprue gives a focused source for the specific suspension and brace elements needed to return a compatible model to running or display condition.
Basic accessories
FF Parts Side Panel Heavy Rack Model Parts Set
319007444€31.59
FF Parts Side Panel Heavy Rack is a model parts set for builders who need specific body and rack components for a compatible project. The sprue-mounted layout keeps the white moulded sections together before removal, making it easier to inspect the shapes, plan the build sequence and prepare each section for trimming, test fitting and finishing at the bench. The visible parts include 2 large curved rectangular side panels, 2 cylindrical ribbed sections and smaller connecting pieces formed as one unassembled set. That combination suits repair work on an existing model, replacement of worn or missing sections, or conversion work that calls for this exact panel and rack arrangement. The white surface is well suited to primer and paint, while the separate moulded sections allow clean preparation before final installation. Because the parts are supplied on sprues, builders can remove only the needed sections and keep the remaining pieces together until the next stage of assembly. On the workbench, this set supports careful dry fitting, surface preparation and colour finishing before the parts are added to the main build. It also works well as a spare parts source for restoring a compatible model with matching shaped panels and drum-like components.
Electronic
Flash Unit 56010/56020, model accessory cable
307255018€75.99
The Flash Unit for 56010 and 56020 is a model accessory cable designed for matching Tamiya applications that use this specific electrical part. Its layout combines a long black lead, a white multi-pin connector, a rectangular end section and additional red, white and black wires near the connection point, creating a compact harness for the intended internal link. The visible connector format helps distinguish this unit from generic wiring, while the bundled lead keeps the assembly together for handling and installation. Orange-insulated contact points mark the active connection area, and the attached warning tag indicates the high-voltage character of the component. That makes this part especially relevant when restoring the original electrical function of a compatible model or replacing a worn or missing harness with the correct designated unit. In workshop use, the Flash Unit suits repair, maintenance or parts replacement on 56010 and 56020 model builds that require this exact cable format. It fits naturally into a spares box for ongoing upkeep, and its defined connector-and-lead arrangement supports accurate matching when an existing electrical line needs to be exchanged. Warning! Not suitable for children under 14 years.
Basic accessories
Ford Aeromax Sticker Bag, decal set for RC truck
309495289€11.99
The Ford Aeromax Sticker Bag is a decal set for finishing the 1/14 RC Tractor Truck Ford Aeromax with model-specific graphics across the cab exterior and interior. Large blue Ford oval logos, Aeromax name decals, grey trim pieces and orange marker-style panels give the bodywork the markings shown for this truck, while the flat printed sheet keeps each graphic ready for precise application during the final detailing stage. Beyond the outer panels, the sheet also carries dashboard strips, instrument cluster graphics, vent details and console decals that bring more definition to the cab interior. Small permit-style labels, white regulatory lettering and route-style markings add the kind of transport details that make a scale truck scene look more convincing at close range. California and Nevada license plate decals are both included on the sheet, giving 2 regional plate options for the finished model. Numbered positions on the sheet help align each marking with the intended area of the body or interior. This decal sheet suits replacement work on an existing Ford Aeromax build as well as a fresh finishing pass on a newly painted cab. Applied to body panels, dashboard sections and trim areas, the graphics help the truck read clearly as a Ford Aeromax from shelf display distance and in close-up hobby photography. Warning! Not suitable for children under 14 years.
Basic accessories
Frame L&R for 56301, model spare part
309805455€53.99
Frame L&R for 56301 provides 2 matching frame rails for the specified model, with a black metal construction and a long U-shaped channel form that supports the structural layout of the assembly. The evenly spaced round holes and elongated slots create clear fastening points, so the rails can be positioned where alignment and secure mounting are required. The left and right configuration matters because mirrored frame sections handle the geometry of a larger build differently than a single straight bracket. Here, the hole pattern runs across the rail length, while the raised tabs at one end add further mounting points for connected sections. That combination makes these parts suited to repair work, replacement of damaged sections, or restoration of an existing 56301 build where the original frame geometry needs to be maintained. The metal format also gives the rails the rigid profile expected from structural chassis components. In workshop use, these rails fit naturally into rebuilds that focus on bringing a model back to its intended structure after wear or damage. They also suit planned maintenance where a bent or missing frame section would affect how adjoining parts line up during reassembly. Warning! Not suitable for children under 14 years.
Basic accessories
Fuel Tank Sun Visor, model parts set for S770
319225229€24.29
This molded parts set supplies a fuel tank, a sun visor and additional exterior components for the S770, all formed in black material on a single sprue. The frame keeps each section organized before removal, so the build starts with a clear overview of the shapes, mounting points and numbered references needed for placement on the model. Alongside the main tank and visor pieces, the sprue carries smaller caps, brackets, connectors and rod-like elements that support a more complete restoration or replacement job. The numbered layout helps match each section to the intended position during assembly, especially when several similar small fittings appear on one frame. Because the parts arrive unassembled, trimming, cleanup and surface finishing can be handled to suit the condition and style of the existing build. The black molded finish also suits projects where matching darker trim sections matters. On the bench, this set fits naturally into repair work, parts replacement or a paused build waiting on missing exterior pieces. It also works well as a reference frame for checking shapes and part locations before separating components for final installation on an S770 model. Warning! Not suitable for children under 14 years.
Basic accessories
G Parts Bag 56366, model parts set, black sprues
319006952€39.99
G Parts Bag 56366 supplies a grouped set of black molded components for scale model assembly, with the parts arranged on sprue frames for clear handling at the workbench. The visible selection includes a large box-like shell section, a broad base panel and smaller fitted pieces that suggest a structured mechanical module with layered outer and inner surfaces. The base section shows molded reinforcement detail and round mounting points, giving builders clear reference locations when test-fitting adjoining sections. A square hatch-style panel with a recessed handle adds another defined surface element, while the long narrow frame pieces introduce linear structure that can read as rails, supports or ladder-like sections depending on the build. Smaller rectangular components remain attached to the runners until removal, which helps keep matching parts together during trimming, cleanup and paint preparation. The black material also makes panel edges, recesses and attachment points easy to distinguish while planning the next assembly step. On the bench, this parts set suits careful dry-fitting, surface finishing and staged sub-assembly work. It also supports replacement or restoration tasks where the correct molded section is needed to complete a specific build area with matching form and detail.
Basic accessories
G-Parts Bag G, model parts set for 56360
319004978€29.49
G-Parts Bag G is a moulded parts set for 56360, arranged on a single sprue with several structural sections that support repair, replacement or continued assembly work. The layout centres on a large chassis-style base plate, joined by a second flat panel and a group of smaller technical pieces that can be separated as needed for the matching model. The main sections show multiple cutouts, slots, screw holes and raised mounting points, indicating defined connection areas for further mechanical or body-related assemblies. Alongside the larger plates, the sprue also carries round disc-shaped parts, a rectangular cover-style section, a curved support-like piece and a narrow central structural element. This combination makes the set useful when a build needs specific frame-related parts from the original moulded runner rather than a single loose replacement piece. On the bench, the one-piece sprue format keeps all sections together until trimming begins, which helps with part identification and organised handling during a rebuild. The black moulded finish gives the set the technical look expected of vehicle understructure components, while the varied shapes and mounting features make each section easy to match to its intended position within model 56360. Warning! Not suitable for children under 14 years.
Basic accessories
G-Parts Coupler-Main-Plate Trucks Parts Set
300005473€23.99
This G-Parts set provides the Coupler-Main-Plate truck components as a single molded sprue, giving model builders a direct source for replacement or repair work on an existing Tamiya truck build. The black runner keeps each piece in its original molded position, making the shapes easy to inspect before cutting, trimming and fitting. The frame carries a large rectangular plate together with smaller matching sections, including square mounting pieces, ring-shaped parts and elongated molded elements. That layout helps separate major structural pieces from smaller connection parts while keeping the full group organized on one runner. Because the parts remain attached until removal, each section can be checked against the build step or worn component before installation. The molded arrangement also supports careful bench work, where clean part removal and dry fitting matter as much as the final placement. On the workbench, this set suits rebuilds, parts replacement and restoration of an older truck chassis assembly. It also helps when a damaged section needs to be swapped without replacing a larger assembly, keeping repair work focused on the exact molded components required.
Basic accessories
GG Parts Bag 56366, model parts set, chrome finish
319006953€27.49
GG Parts Bag 56366 adds bright exterior detailing to a scale model build with chrome-colored injection-molded parts arranged on a single sprue. The set centers on a wide tubular guard frame and 4 round lamp housings, creating the plated look often used for classic custom trim, utility bars or auxiliary lighting. The connected runner layout keeps each section together until trimming starts, which helps when planning the order of assembly and test fitting. Alongside the main frame and lamps, the sprue also carries cross-shaped supports and smaller paired bracket pieces that can be used as mounting hardware within the intended build. The chrome-look finish gives each contour a crisp edge, so curved bars, round lamp faces and compact attachment points remain visually distinct after installation. Visible sprue markings include GG, 5 and 2. On the bench, these parts suit builders refining a vehicle model with added front or rear bar detail and extra lighting accents. Once fitted, the plated surfaces catch the eye around the body shell and help smaller exterior components read clearly in close-up photos or shelf display scenes.
Basic accessories
GG-Parts Bag, model parts set, translucent orange
319006849€11.49
GG-Parts Bag is a model parts set with translucent orange injection-molded components that add visible detail to a compatible build. The runner carries several small lens-style pieces and 1 larger curved cover piece, giving the set a clear focus on replacement or finishing work where color, shape and molded texture need to match the original assembly. The translucent material suits parts that are meant to remain visually distinct on the finished model, and the attached sprue layout keeps each piece organized until the required section is removed. Molded surface texture on the smaller components supports a defined light-like appearance, while the larger curved section provides a broader shaped panel from the same runner. This makes the set useful when a build needs specific orange detail parts rather than a general assortment of hardware. Batteries are not included. On the workbench, the set fits naturally into repair jobs, restoration projects and careful parts replacement on an existing model. It also supports builders who want to complete a stored kit with matching molded components instead of substituting a different color or shape from another source.
Basic accessories
Globe Liner P-Parts Dashboard Spare Parts Set
300115178€24.99
The Globe Liner P-Parts dashboard set is a dedicated spare parts frame for the Tamiya 56304 truck model, focused on restoring interior sections with matching molded components. The sprue format keeps each piece organized before removal, which helps when planning a repair, replacing damaged cabin sections or completing an unfinished build. Visible parts on the frame include 4 ribbed seats, a steering wheel, a dashboard or console section, a floor panel with molded openings, a rectangular mounting panel and a long box-shaped interior or body component. This combination supports work on the cabin layout rather than exterior decoration alone. The molded pieces arrive unassembled and can be prepared with the usual model-building steps such as trimming, test fitting and paint finishing where required. As a dedicated parts set rather than a full kit, it suits targeted restoration work on an existing Globe Liner build. On the workbench, the frame gives model builders a practical way to replace worn interior details without sourcing each cabin section separately. It also fits rebuild projects where an older 56304 model needs fresh cockpit parts to bring the truck back into a more complete display condition. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler Chassis Frame L/R, spare part set
314305649€60.99
The Grand Hauler Chassis Frame L/R set provides the two side members that define the main structure of the truck chassis. Each rail is a long black metal strip with folded edges, creating the shaped profile needed for a frame section that sits straight and connects cleanly with surrounding parts in the assembly. A series of pre-drilled holes and elongated slots runs along both rails, giving multiple fastening points where the chassis layout requires them. That hole pattern matters during repair work, because the frame section has to match the original mounting positions rather than relying on improvised drilling or reshaping. The left and right format also keeps the replacement specific to the Grand Hauler designation in the data, instead of treating the frame as a generic strip. For model maintenance, this kind of matched structural pair is useful when a rebuild calls for fresh side members with the correct length, profile and opening layout. On the workbench, the rails suit careful restoration of the truck's central understructure before the larger build is reassembled around them. They also fit parts sorting and planned repair sessions where the frame geometry needs to be brought back to the intended layout with dedicated replacement members. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler D-Parts, model parts, chrome bumper
319000760€27.99
Grand Hauler D-Parts focus on the front bumper area and bring chrome-colored styling to a truck model build. The runner holds several shaped components in a reflective metallic-look finish, giving the front end a brighter, more defined appearance once fitted in place. The set centers on exterior detailing rather than mechanical changes, making it a useful choice when a build calls for fresh trim pieces in the bumper section. Curved grille-like forms, bracket-style elements and panel sections on the sprue show the variety of shapes used around the front of the model. Because the parts arrive attached to the runner, each piece stays organized until removal and assembly. The chrome-colored surface emphasizes molded lines and contours, which helps the finished truck present a more finished scale character at the nose. On the bench, these parts suit replacement work, detail restoration or a visual refresh of an existing Grand Hauler build. In a display setting, the reflective finish draws attention to the front fascia and pairs naturally with other bright exterior accents on a truck model. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler H-Parts Rear Fender Set, model parts
319000761€25.99
The Grand Hauler H-Parts Rear Fender set adds a clean replacement route for a truck build that needs fresh rear body panels. The pack provides 2 injection-molded fender components, shown on sprues in an unused state, with smooth curved outer surfaces and molded mounting details that suit careful finishing work. The white parts arrive unpainted, which leaves colour choice open for matching an existing cab and chassis scheme or for a full visual update during a rebuild. Small circular and rectangular molded sections with holes are attached on the frame alongside the main pieces, indicating connection points and supporting detail around the final fit. Because the set is identified specifically for the Grand Hauler, it suits targeted restoration, replacement or parts-based workshop planning rather than broad universal use. On the bench, the sprue format helps keep both main fenders and the smaller attached sections together until trimming begins. During a repair or refresh of a display truck, the paired layout supports a consistent rear view across both sides and gives the bodywork a complete, balanced finish once painted and installed. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler K-Parts, clear parts set
319115421€10.79
The Grand Hauler K-Parts clear parts set adds the transparent finishing elements that give a scale truck build its crisp visual definition. Supplied as a molded clear runner, it provides small formed components for the Grand Hauler and supports accurate replacement work when original clear sections are no longer available or no longer presentable. The runner groups several parts in one frame, which helps keep matching pieces organized before trimming and test fitting. Clear molded components are especially useful on visible exterior areas where light lenses, covers or similar detail sections need transparency rather than an opaque finish. The image shows round textured inserts, small cylindrical forms and rectangular molded sections, giving builders multiple detail shapes from one dedicated sprue. Because the set is tied to the Grand Hauler designation, it suits model-specific maintenance as well as careful restoration work on an existing build. On the bench, this kind of replacement sprue helps refresh a display truck with cleaner transparent details or complete a project that needs missing clear sections. It also fits neatly into a spare-parts setup for long-term upkeep of a Grand Hauler model. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler L-Parts, model parts in clear orange
319115423€10.79
Grand Hauler L-Parts in clear orange add the exact translucent colour and designated section needed for a focused model build or replacement task. The frame shown in the product data carries multiple small formed pieces together with larger rounded dome-like elements, all supplied on a single injection-moulded runner for organised handling before removal. The L marking on the sprue identifies this specific parts group within the Grand Hauler range, which matters when a build calls for one defined section rather than a broad assortment of unrelated components. The clear orange finish changes how light passes through the moulded shapes, giving these parts a distinct visual role wherever the model design uses transparent coloured details. Because the components remain attached by thin connectors, the layout stays easy to inspect before trimming and fitting. Visible moulded identifiers on the frame support part recognition during build preparation. This parts frame suits repair work on an existing Grand Hauler model as well as planned replacement during a fresh assembly. On the bench, the grouped runner format helps keep the required pieces together while the build moves from checking the sprue to cutting, finishing and fitting each part into place. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler muffler covers, model spare part
313585115€32.49
These Grand Hauler muffler covers are a dedicated spare part for restoring or completing the exhaust area on the truck model. The set provides 1 cover with an elongated, slightly curved form that matches the line of the mounted muffler section, helping the finished build keep its intended silhouette and trim detail. The chrome-colored surface brings a bright metallic note to the side of the vehicle and suits builds where polished truck hardware is part of the visual character. The open channel profile supports mounting as a formed cover rather than a flat decorative strip, which matters when replacing a missing original part on a detailed model. As a model supply within the Tamiya range, this part is suited to maintenance work, careful rebuilds and projects that need the correct Grand Hauler-specific exhaust trim rather than a generic substitute. On a workshop table, the cover fits naturally into repair sessions focused on bringing a used truck back to complete condition. It also suits fresh assembly work when a replacement is needed to keep the muffler area aligned with the rest of the model's exterior detailing. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler Propeller Shaft Long Spare Part
313485215€14.49
The Grand Hauler Propeller Shaft Long is a dedicated spare part for model maintenance, built to restore a specific mechanical link within a matching Grand Hauler assembly. Its long, straight shaft format and metal construction suit drivetrain transfer duties where a clean connection between two mounted points is required. Each end is formed as a polished connector with a ball-shaped tip and short cross pin, giving the part a defined coupling layout rather than a plain rod profile. That end geometry matters during service work because it determines how the shaft seats into the surrounding mechanism and how movement is passed through the connected sections. Supplied as 1 piece, it fits focused replacement jobs where only the worn or damaged shaft needs to be changed instead of replacing a larger assembly. On a workbench, this kind of spare part helps bring an existing truck model back into running condition with the correct long shaft format named for the Grand Hauler. The clean silver finish and uniform cylindrical body also make visual inspection straightforward when comparing the old part against the replacement before installation. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler Q-Parts Accessory Set, Chrome Details
319115424€42.99
The Grand Hauler Q-Parts accessory set brings chrome-plated detail to a truck model with fuel tank and roof lamp components arranged on a single sprue. The reflective finish gives exterior sections a bright metallic look that stands out on the cab and side areas once the parts are trimmed, prepared and fitted into place. Alongside the cylindrical tank halves, the runner also carries round covers, small caps, bracket-like pieces and compact trim elements that support a coordinated appearance across multiple visible points of the build. Because the parts are supplied as separate molded components, placement can follow the layout of the model rather than forcing a single preassembled unit. The plated surface suits display-focused finishing, where contrast between painted body panels and bright metal-look accents helps define the truck's shape. The set is intended for model use and centers on exterior detailing rather than mechanical function. On the workbench, these parts fit naturally into a custom truck project, a restoration of an existing Grand Hauler build or a visual refresh of selected sections. Once installed, the roof lamp and tank details help frame the upper cab line and side profile with a more elaborate road-truck character. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler radiator grille, model parts set
319225174€43.99
The Q-Parts Radiator grill Grand Hauler adds bright plated detail to a scale truck build with a large perforated grille and a coordinated selection of exterior trim pieces on one chrome-finished sprue. The reflective finish gives front-end sections, tanks and pipe elements a crisp metallic look that stands out clearly during detailing work at the bench. Beyond the grille itself, the runner layout shows curved pipe sections, cylindrical tank forms, wheel-related trim parts, brackets, steps and smaller body details that support a visually consistent finish across several visible areas of the model. Keeping these pieces on a single sprue helps builders sort, prepare and fit matching plated components during a repair, refresh or custom detailing session. The perforated grille pattern adds depth to the truck face, while the plated surfaces catch light across edges and contours that would read flatter in an uncoated finish. This set fits naturally into restoration work on a Grand Hauler build, where worn exterior accents need replacement, and it also suits custom projects that call for brighter highway-truck styling. On a display shelf or during close-up photography, the chrome-toned parts help define the grille, tanks and pipework with stronger visual separation between body sections and trim. Warning! Not suitable for children under 14 years.
Electronic
Gun Elevation Unit Tiger 56010, model accessory
304205021€34.49
The Gun Elevation Unit Tiger 56010 adds motorized movement to a compatible Tiger model through a compact gearbox assembly built around a silver electric motor, a metal mounting bracket and a stepped gear train. A large black gear works with 2 white gears to transfer the motor's rotation into controlled elevation movement, giving the gun mechanism a clear mechanical function rather than a static display position. The assembly combines the drive section and mounting hardware in one format, with a plate, screws and axle shaft already arranged as part of the unit. Exposed gears make the mechanism easy to understand during installation, while the rectangular motor housing keeps the drive section compact inside the model structure. Yellow and gray twisted wires extend from the motor for connection into the electrical layout of the build. This is a dedicated model accessory rather than a general-purpose motor, so its value lies in adding a specific moving function to the Tiger setup named in the data. In a finished compatible build, the unit supports scenes where the gun angle changes to match terrain, target position or display setup. During a detailed retrofit or repair, the geared assembly also helps restore the intended powered elevation action with the correct type of mechanism for this application. Warning! Not suitable for children under 14 years.
Basic accessories
H Parts Front Bumper, model spare part sprue
319000849€21.99
H Parts Front Bumper is a model spare part set for hobby building and repair work, supplied as a white molded sprue sheet with the parts still attached to the frame. The layout keeps each section visible before removal, which helps with part matching and planning during a careful rebuild or replacement job. The visible contents show a large body-related shell section with window openings, 2 matching mechanical-looking halves, a rectangular plate with 4 holes, 2 curved bumper-style pieces, 2 small round cap-like parts and several narrow connector pieces. This combination points to a body and detail parts group rather than a complete vehicle, making it useful when a matching build needs specific replacement sections instead of a full new kit. The molded markers visible on the frame include D, B, 8, 9 and 10, adding another reference point during identification and fitting. On the workbench, the sprue format supports a measured workflow: compare the frame to the required section, remove only the needed piece, then continue with trimming and installation on the matching model. For restoration projects, incomplete kits or damaged body assemblies, this spare part set keeps the repair focused on the exact area that needs attention. Warning! Not suitable for children under 14 years.
Basic accessories
H-Parts Bag(H), model parts set for vehicle body
319004950€21.99
H-Parts Bag(H) is a model parts set centred on vehicle body construction, with white styrene pieces supplied on a rectangular sprue frame. The layout keeps the larger cab or main shell section, side panels and smaller insert parts grouped together, which helps when identifying each section before cutting and fitting. The moulded shapes show pronounced wheel arch lines and body panel contours, giving the shell its character before paint and final assembly. Because the parts arrive unassembled on the frame, each section can be trimmed, cleaned and prepared in sequence rather than handled as one finished shell. Smaller central inserts add further structure and detail to the body area, supporting a more complete build where damaged or missing original parts need replacement. As a dedicated parts bag, this set is suited to repair work, restoration tasks or the completion of an existing model that requires the correct body-related sections. On the workbench, the sprue format supports an orderly building routine: identify the needed section, remove it from the frame, then sand, test fit and finish it alongside the matching panels. It also suits parts storage between sessions, since the unused sections remain connected until needed.
Basic accessories
H-Parts Fuel Tanks, model parts for 56301/56304
300005474€22.49
H-Parts Fuel Tanks 56301/56304 adds chrome-plated exterior components for compatible truck model builds, bringing bright metallic surfaces and recognisable hardware shapes into the finished look. The set is intended for 56301 and 56304, making it a focused choice when a build needs matching tank sections and related trim rather than a generic assortment of accessories. The sprues shown for this set carry 2 large cylindrical tanks with dark centre sections and chrome end bands, along with curved and straight pipe pieces, pointed cone-style parts, textured plates with a diamond-plate pattern, a curved guard or frame piece, and a box-like panel component. That mix supports the visual structure often seen along the sides of scale trucks, where tanks, piping and plated surfaces break up large body areas with more mechanical detail. The chrome-plated finish gives these parts a reflective appearance that stands out against painted cab and chassis sections. This set suits repair work, restoration of older builds, or detail-focused custom projects based on 56301 and 56304. During assembly and finishing, the separate parts can be prepared, painted where needed, and fitted to rebuild missing exterior sections or refresh the overall presentation of a truck model with matching hardware elements.
Basic accessories
H-PartsFront Bumper/Side Guard, model parts set
319005974€23.49
H-PartsFront Bumper/Side Guard 56325 provides model-specific exterior sections for repair, replacement or ongoing assembly work. The set is supplied as white injection-moulded parts on a sprue and centers on a front bumper and side guard layout, giving a clear starting point for restoring the outer structure of the matching vehicle area. The runner format keeps the individual sections together until preparation begins, which helps when checking shapes, cutouts and mounting points before removal. Visible panel lines, formed openings and screw-hole positions support accurate alignment with the surrounding bodywork. Alongside the larger sections, the set also carries smaller matching pieces that complete the relevant exterior area and help maintain a consistent look across the rebuilt section. This kind of parts set suits workshop use when an existing build needs fresh exterior pieces after wear, damage or a rebuild. It also fits ongoing assembly projects where the correct moulded sections are needed to continue with body preparation, surface finishing and final installation on the intended model. Warning! Not suitable for children under 14 years.
Electronic
HeadLight FogLamp Bulbs, LED light set
307175096€42.99
This LED light set is built for compatible model lighting layouts that use separate headlight and fog lamp positions. Multiple clear lamp housings are prewired to a compact harness, and the white plug connector provides a defined connection point for matching electronics. The bundled lead arrangement in black, white and orange keeps the wiring grouped together, which helps when routing the set through narrow body cavities or around existing chassis components. The layout shown here centres on functional lighting parts rather than body trim or cosmetic add-ons. Clear lamp ends, a tied cable section and the extended orange lead indicate a harness prepared for installation as a single assembly instead of loose individual bulbs. That makes the set useful for replacement work on an existing build or for restoring light functions on a compatible vehicle. The small format also suits projects where space around the front body section is limited and cable control matters during fitting. On the bench, this kind of wired module supports careful, component-led work: connector placement, lead routing and lamp positioning can be matched to the intended light locations. In a finished compatible model, the set serves the specific task named in the designation, bringing headlight and fog lamp points back into operation with dedicated LED parts. Warning! Not suitable for children under 14 years.
Basic accessories
Hitch/Chassis Rear End, model parts set 56371
319225235€25.99
This XX Parts Hitch/Chassis rear end 56371 set supplies molded replacement components for the rear chassis and hitch area of a compatible Tamiya model. The 2 sprues carry black and dark gray parts with structural shapes, mounting holes, bracket forms and smaller mechanical sections that support an accurate rebuild where the rear end needs fresh components. Larger plates and frame-like sections handle the main structure, while smaller rings, housings, lever-style pieces and cover elements fill out the detailed rear assembly. Keeping the parts attached to the runners helps with identification during sorting and test fitting before installation. The molded forms and mirrored pieces also support clean alignment when replacing matching left and right sections. As a dedicated spare-parts pack, this set focuses on restoring the original layout of the rear chassis zone rather than mixing unrelated universal hardware. On the workbench, the set suits repair jobs after wear, damage or incomplete earlier builds. It also supports careful restoration of an existing truck model when the hitch mount or rear structural area needs the correct shaped components to bring the assembly back into working order.
Basic accessories
Interior Parts Set, model accessory for MB Arocs
319115455€15.79
This interior parts set is made for MB Arocs model work and brings key cab details together on one white molded sprue. Dashboard elements, 2 front seats, a steering wheel, side panels and smaller control parts give the cabin area a defined structure that stands out once assembled and finished. The rectangular runner frame keeps the components organized before removal, which helps during planning, trimming and paint preparation. Larger pieces such as the dashboard and seating establish the main cockpit layout, while narrower trim sections and lever details fill in the smaller visual zones that make a truck interior look more convincing at scale. Molded identifiers on the sprue support part recognition during the build, and the unassembled format leaves room for careful surface preparation and precise placement. On the bench, this set suits builders refining a truck cab with added interior definition rather than leaving the inside sparse. During painting and final assembly, the separate parts allow the cabin to be approached section by section, from the seating area to the controls and side trim, for a cleaner and more deliberate finish. Warning! Not suitable for children under 14 years.
Basic accessories
K Parts Fender M-B Arocs, model spare parts
319115454€17.49
K Parts Fender M-B Arocs / 56352 supplies shaped body components for a scale truck build, centring on the fender area and adjoining exterior sections. The set is presented as a white moulded sprue with multiple unassembled parts, giving builders the exact pieces needed for replacement work, restoration, or a fresh body assembly tied to this designation. The sprue layout groups several distinct panel forms, including 2 large curved fender or wheel-arch sections, 2 matching side or bumper elements, smaller rectangular panels, larger mirrored structural pieces, a long narrow strip with raised rivet or bolt detail, and small mounting parts. That mix supports careful cutting, cleanup and test fitting before paint is applied. The white styrene surface also makes edge preparation and seam checking easier during the finishing stage, especially when matching adjoining body lines across both sides of the truck. On the bench, these parts suit repair of worn or damaged bodywork as well as completion of an unfinished M-B Arocs project. The mirrored layout helps keep left and right body sections visually consistent, while the separate trim-style pieces allow more precise work around wheel arches and outer panel transitions. Warning! Not suitable for children under 14 years.
Basic accessories
K Parts Fr.Fender Cab M-B Actros, spare parts set
319115368€22.99
This spare parts set for the M-B Actros 56335 focuses on front fender and cab sections, giving model builders a direct route to restore damaged exterior areas or replace missing body components. The off-white molded frame holds multiple shaped pieces together in one organized layout, so the main cab structure and matching detail sections can be prepared from a single sprue. The parts layout shown on the frame includes large curved panels, 2 bucket-style seats, and several smaller interior or trim elements that support a more complete rebuild than a single replacement panel alone. Molded identifiers such as A1, A2, A3 and onward are placed beside the attachment points, helping with part recognition during cutting, sorting and test fitting. This kind of numbered sprue format suits careful repair work, where matching the correct section before assembly matters as much as the final fit. On the bench, the set supports body restoration, replacement after wear, or preparation for a fresh cab build on the M-B Actros 56335. It also suits hobby setups where original panels need to be swapped before painting, detailing, or reassembly with existing compatible model components. Warning! Not suitable for children under 14 years.
Basic accessories
K-Parts Aeromax Dashboard, model accessory
300115231€20.99
The K-Parts Aeromax dashboard set is a model accessory for 56309 that concentrates on the visible interior of the cab. Moulded cabin pieces such as seats, a steering wheel, dashboard sections and console-style parts give the Aeromax build a defined cockpit structure that stands out through the windows and windscreen. The white sprue presents the parts unassembled, which supports careful trimming, surface preparation and paint planning before final fitting. Separate interior pieces make it easier to work across distinct zones of the cab instead of treating the whole area as one moulded block. That layout suits builders who want to add colour contrast, pick out instrument areas and bring more depth to the seating and control section. Thin lever-style parts and smaller trim elements extend the detailing beyond the main dashboard shape and help complete the cabin scene with more specific fittings. On the bench, the set supports a focused interior stage within a larger 56309 build. Once fitted, the added cabin structure gives the Aeromax model a more finished look in display settings and rewards close-up viewing of the driver area. Warning! Not suitable for children under 14 years.
Basic accessories
K-Parts Bag Fitting Parts, model accessory set
319115488€43.99
K-Parts Bag Fitting Parts (K) is a model accessory set focused on the small molded sections that give a vehicle build its finished look. The silver sprue holds multiple unassembled components in one frame, making it easier to identify, remove and prepare each section during a careful build or replacement job. The visible parts include grille-style pieces, bumper and trim sections, mirror arms, mirror heads, handles and larger panel elements. This mix supports work on the exterior areas that define the outline and surface character of a scale vehicle. Because the components remain attached to the sprue before use, each section stays organized through inspection, cutting and test placement. The metallic silver finish suits details intended to represent chrome or polished metal areas on the completed model. This set fits naturally into a workshop setup where an existing build needs specific fitting parts replaced, or where a project is being completed with the correct molded sections. It also helps when a builder wants to keep spare detail parts on hand for later repair work, touch-ups or a second pass on visible trim areas.
Basic accessories
K-Parts Bag K, fitting parts set for model kits
319115514€33.49
K-Parts Bag K is a fitting parts set for model kits, centered on a chrome-finished sprue that brings a bright metallic surface to visible exterior details. The frame holds multiple unassembled components in one runner, so the parts stay organized until they are cut free and placed during the build. The assortment on the sprue covers several distinct shapes, including perforated step plates, front sections with window openings, rectangular grille-like elements, curved bar-style pieces, a long ribbed panel and a long smooth strip. That mix supports detailed work across several vehicle zones rather than repeating one single shape. Smaller mirror- or bracket-like pieces add further fine detail where the build calls for compact exterior fittings. The chrome-plated finish gives these molded parts a clean reflective look that stands out against painted body sections and other construction materials. On the bench, the single runner format helps with part identification before trimming, cleanup and placement. During assembly, the varied shapes suit careful detailing on cab, side and front areas, where trim lines, steps and fitted accents help the finished model read with more scale character.
Basic accessories
K-Parts Fender Wheel Housing, model accessory
309115180€22.49
The K-Parts Fender Wheel Housing set is a model accessory created for the 56318 platform and focuses on one specific body area: the fender and wheel housing section. As a dedicated replacement part, it supports tidy repairs when the original section shows wear, damage or loss, and it helps return the model to its intended body outline around the wheels. Because this set is tied to 56318, it suits maintenance work that calls for a matching part instead of an improvised substitute. The fender area shapes the visual transition between body and wheel opening, so replacing it with the correct K-Parts section helps preserve the model's original look. This also makes the set useful for ongoing upkeep of a working display or a long-term build that needs selected body sections renewed rather than fully replaced. On the bench, the set fits naturally into repair, restoration and parts-management routines for the 56318 model. It can be kept as a workshop spare for future maintenance or used to complete a body refresh when the wheel housing area needs attention after regular handling. Warning! Not suitable for children under 14 years.
Basic accessories
K-Parts Headlight Glasses, model accessory set
300115192€8.29
K-Parts headlight glasses M-B 56305 add transparent light detail to a scale vehicle build with molded clear parts that bring sharper definition to the front end. The sprue carries multiple lens pieces with rectangular forms and fine surface patterning, giving each light area a more realistic optical look once separated and installed. The clear molded parts show ribbed lines, grid textures and reflector-style internal detailing that suit precise finishing work on a model based on 56305. Larger and smaller lens elements on the same runner support matched placement across the body, while the numbered tabs on the frame help distinguish individual parts during the build. The transparent material allows light housings and exterior trim sections to read as separate components rather than painted shapes. This makes the finished model look more layered and mechanically defined at close range. On the workbench, the sprue format supports an orderly sequence of trimming, test fitting and placement with the rest of the build. During final detailing, the clear inserts can be combined with careful paintwork around the housings to emphasize panel lines, lamp shapes and the character of the vehicle front. For restorations, replacements or fresh builds of the matching model, these K-Parts lenses focus on the small visual elements that complete the overall scale impression. Warning! Not suitable for children under 14 years.
Basic accessories
K-Parts Wheel House MAN TGX model spare parts
319115273€13.99
This K-Parts Wheel House set is a dedicated spare-parts frame for the MAN TGX 56325, supplying the moulded sections needed where a build calls for replacement wheel house components. The white runner layout keeps each piece attached and visible, so the shapes and part positions can be checked before removal and fitting. The frame shown carries multiple moulded parts, including 2 large curved wheel house sections with circular mounting holes, 2 rectangular flat panels, 2 box-like components and 1 narrow central piece. That arrangement makes this set useful for restoring a damaged build, replacing lost sections or preparing a clean rebuild with matching shapes from the original tooling. The unpainted finish leaves the parts ready for the same surface preparation and colour matching as the rest of the model. On the bench, this set supports careful repair work on a MAN TGX 56325 where the wheel arch area or adjacent fitted sections need fresh parts from the correct K sprue. It also helps keep an ongoing truck project moving when a single damaged section would otherwise interrupt assembly or finishing. Warning! Not suitable for children under 14 years.
Basic accessories
King Hauler K-Parts, clear spare parts set
300115104€9.29
King Hauler K-Parts is a clear spare parts set for the King Hauler, supplying transparent molded components for restoration, repair or completion work on the model. The sprue format keeps the parts together before removal, making it easier to identify each section during bench work and to prepare replacements for the correct mounting points. The frame carries 4 main clear pieces, including 2 rectangular sections and 2 round sections. Surface treatment differs across the parts: the rectangular pieces show etched line detailing, while the round pieces use a vertical ribbed texture. That combination matters on a scale truck build because clear lenses and covers rely on molded patterning, not only shape, to reproduce the look of fitted light units and trim elements. Visible molded markings on the frame also help distinguish the set during parts storage and workshop organisation. This set suits rebuilds after wear, replacement of missing clear sections, or careful refresh work on an existing King Hauler. It also fits ongoing workshop stock for model maintenance, where dedicated clear spares help keep repair jobs focused on the exact section that needs changing. Warning! Not suitable for children under 14 years.
Basic accessories
King Hauler L-Parts, model spare parts set
300115105€9.29
King Hauler L-Parts are a dedicated spare parts set for kit 56301, supplied as a translucent orange molded frame with multiple replacement components for restoration and maintenance work. The set supports accurate repair where the original build needs matching pieces rather than improvised substitutes, helping preserve the intended look and fit of the model. The frame carries several small molded sections in one organized layout, including round and rectangular forms that can be separated and installed where needed on the existing build. This format makes it easier to identify, sort, and compare each piece against the corresponding location on the model before fitting. The translucent orange finish is a defined visual characteristic of this set and helps match sections that depend on that specific color tone. As a spare parts release rather than a full kit, the focus stays on targeted replacement for the named King Hauler version. On the workbench, the set suits careful rebuilds after wear, loss, or damage to original components. It also fits partial restorations where only selected sections of the 56301 model need renewal, allowing the existing build to return to a more complete and consistent appearance. Warning! Not suitable for children under 14 years.
Basic accessories
King Hauler P-Parts Dashboard, spare parts set
300115108€23.49
King Hauler P-Parts Dashboard is a molded spare parts set for the 56301 model, centered on interior-style and control-area components used during a repair, restoration, or completion build. The white parts come attached to a single sprue, which keeps the individual shapes grouped together until trimming and fitting begin at the bench. Visible pieces on the frame include a steering wheel, a dashboard panel with circular instrument-style openings, seat-shaped sections, support elements, rods, and larger molded panels. This layout helps identify matching parts before removal and gives a clear view of how each section relates to the original assembly. As a dedicated replacement set rather than a full vehicle kit, it focuses on the molded section named in the designation and supports accurate substitution when original parts are lost, damaged, or incomplete. The set is intended for the King Hauler 56301 reference named in the data. It fits naturally into workshop tasks such as restoring an older build, replacing a damaged dashboard area, or completing a model that is missing interior sprue parts. On the bench, the grouped frame format supports step-by-step trimming, sorting, and test fitting before final installation. Warning! Not suitable for children under 14 years.
Basic accessories
King Hauler R-Parts 1, model parts set
300115110€19.29
R-Parts 1 for the King Hauler 56301 supplies model-specific plated components for a truck build that depends on bright exterior accents and crisp molded detail. The chrome-plated finish gives the visible parts a reflective metallic look, while the attached sprue layout keeps each piece organised before cutting and fitting at the bench. The frame shown here carries several distinct shapes, including 2 large rounded domes, a rectangular panel with 2 circular openings, a ring-shaped part, smaller round pieces and 2 textured box-like components with diamond-plate surface detail. That mix points to exterior fittings and trim elements used to complete the visual character of the King Hauler rather than structural chassis hardware. As a dedicated R-Parts set, it suits repair work, restoration of an older build or replacement of worn plated pieces on model 56301. On the bench, the plated surfaces help the finished truck stand out around cab and accessory areas where metallic contrast matters most. For builders revisiting a King Hauler or completing a detailed assembly, this parts frame provides the specific shapes needed to restore missing trim and keep the model's look consistent. Warning! Not suitable for children under 14 years.
Basic accessories
King Hauler Sticker Set, RC truck decal sheet
309495161€15.29
The King Hauler sticker set is the finishing sheet for the 56301 truck version, bringing the cab and sleeper panels to life with long mirrored striping, number plates and route-style markings. Printed on a light blue backing sheet, the graphics are arranged for body sections, accessory areas and dashboard placement, so the completed model can carry the layered look of a classic American-style tractor truck. Beyond the large side graphics, the sheet includes KING HAULER name markings, permit-style labels, fuel markings and instrument panel graphics with dials and switch details. Two yellow Nevada-style plates marked 928627 and two blue California-style plates marked 1H55793 are shown on the sheet, alongside smaller transport and registration markings such as HF 15389, MC 39311 and ICC MC 56301. These smaller printed elements help break up large body surfaces and add scale character to close-range viewing. During a restoration, replacement or fresh body finish, the sheet supports accurate re-creation of the original 56301 appearance. It also suits a careful display build, where the dashboard graphic, cab-side striping and owner-operator style markings give the truck a more complete finished presence. Warning! Not suitable for children under 14 years.
Basic accessories
KK Parts Storage Box Doors Ladder Model Parts
319115559€24.39
This KK Parts Storage Box Doors Ladder set provides the molded components shown for 56371 in a dark gray sprue layout that keeps each section clearly arranged before removal. The frame carries large rectangular panels, long narrow strips, ladder-like sections and small bracket-style parts, giving the assembly a defined mix of broad surfaces and smaller connection points. Three main panel pieces feature circular openings near one edge, a detail that shapes the look and fit of the Storage Box Doors Ladder section for this specification. Molded identifiers such as K1, 2, 3, 4, 5, 8 and 9 are visible on the frame, helping distinguish the individual parts during preparation and assembly. The lower area of the sprue holds 2 ladder-like frame pieces, while the upper area includes 6 ring-shaped connector or bracket parts with side tabs or mounting points. The long strip elements on the right side add further structural sections to the same assembly group. As a parts-focused model component set, this sprue suits repair work, replacement needs or a build that requires the exact Storage Box Doors Ladder pieces for 56371. The organized frame layout supports careful cutting, sorting and test fitting at the workbench, especially when matching specific molded sections to an existing model project.
Basic accessories
Knight Hauler H-Parts, model accessory set
300005941€9.49
This H-Parts set is made for the Knight Hauler 56314 and focuses on the cab spoiler area, supplying the shaped replacement sections needed when that specific truck build calls for fresh exterior parts. The set contains 1 H-parts sprue with 5 molded pieces, presented unassembled for fitting into the matching model. The molded sections are arranged on a sprue frame, which keeps the individual pieces together until the build reaches the spoiler stage. The visible parts include curved and flat forms with mounting points that suit exterior body assembly, making the set useful for repair work, restoration, or a clean rebuild of the upper cab section. Because the set is tied to 56314, the part selection stays specific to the Knight Hauler rather than serving as a generic truck assortment. On the workbench, this accessory set supports careful replacement of worn, missing, or unfinished spoiler sections while keeping the truck's appearance aligned with the intended body layout. It also fits neatly into a spare-parts stock for model builders maintaining an existing Knight Hauler over time. Warning! Not suitable for children under 14 years.
Basic accessories
Knight Hauler T-Parts Windows Model Accessory
309225074€15.79
This accessory set provides clear T-Parts windows for the Knight Hauler and focuses on one of the most visible stages of a truck model finish: the cab glazing. The molded transparent sections are supplied on a single sprue, so the different shapes stay grouped together until fitting begins and each section can be matched to its position during the build. The set contains several distinct window forms, including a large curved screen, angular side panels, rounded rectangular sections and a larger rectangular panel. That mix of shapes points to coverage across multiple visible cab openings rather than a single insert. The clear material keeps painted bodywork and interior details visible once installed, which matters on a display model where the cab area draws attention from several angles. Because the parts are molded as dedicated window pieces, they support a neater finish than improvised sheet material and keep the outlines consistent with the intended body shape. On the bench, this kind of parts set suits a fresh build, a careful rebuild or the replacement of marked glazing on an existing Knight Hauler model. It also helps when a project calls for clean, uniform transparent sections before final body assembly and detailing. Warning! Not suitable for children under 14 years.
Basic accessories
L-Parts Dashboard/Seat, model parts for 56318
309115181€22.49
L-Parts Dashboard/Seat for 56318 supplies a dedicated interior parts frame for a compatible model build. The white injection-moulded sprue groups the main cabin pieces in one place, including seat forms, a dashboard section, a steering wheel and several smaller structural elements visible on the frame. This makes the set useful when an original interior section is missing, damaged or still unfinished within the matching 56318 assembly. The parts remain attached to the frame for clear handling before removal, which helps keep the individual shapes easy to sort and identify during the build process. The focus here is the vehicle interior rather than exterior bodywork, so the set supports the cabin area with components shaped for seating and control detail. The moulded surfaces and defined edges suit trimming, test fitting and finishing as part of a precise replacement or continuation build. Because this is a parts set for 56318, the emphasis stays on compatibility with that specific model reference. On the workbench, the sprue can be used to replace worn interior pieces or to complete a paused project that needs the correct dashboard and seat section. It also suits careful stock keeping for model maintenance, where dedicated replacement frames help keep a long-term build accurate to its intended configuration. Warning! Not suitable for children under 14 years.
Basic accessories
L-Parts Interior MAN TGX 56325, model parts set
319115278€16.79
This L-Parts Interior set for MAN TGX 56325 brings key cabin details into the build with a single injection-moulded sprue carrying white interior components. Seat-shaped parts, a circular steering wheel, curved trim pieces and smaller support elements give the cabin area the defined shapes that stand out through windows and open viewing angles. The frame layout keeps the parts connected and easy to identify before removal, which helps maintain order during trimming, test fitting and finishing. The white moulding provides a neutral base for primer and paint, making it suitable for custom colour work that matches the rest of the truck model. Smaller connector and support pieces contribute to the interior structure rather than acting as loose decorative extras, so the set supports both fit and appearance within the cabin section. On the bench, this parts set suits careful assembly sessions focused on interior detailing and paint preparation. Once fitted into the MAN TGX 56325, the shaped cabin elements help the model read more convincingly in close-up views, especially where seating, steering and inner trim are part of the finished presentation. Warning! Not suitable for children under 14 years.
Basic accessories
Leaf Spring, model spare part, 2-piece set
309805460€16.49
This leaf spring set supplies 2 replacement parts for model 56301 and focuses on one clearly defined maintenance task: restoring the specified spring components with the correct designated spare set. The pair format matches the naming in the set, so both corresponding parts are available together for repair or parts replacement. Each piece is formed as a curved leaf spring with curled ends and a central fastening point. The black finish makes the parts easy to distinguish from surrounding hardware during workshop handling, while the matching shape of both pieces supports consistent placement where the model calls for this spring type. As a model spare part, the set is suited to keeping an existing build complete with the named replacement components rather than substituting a different part type. The set fits maintenance work on model 56301, whether worn parts are being exchanged or a stored build is being returned to running condition with the correct spring pieces. Kept alongside other workshop spares, the 2 matching leaf springs provide a direct reference to the designation printed for this replacement set. Warning! Not suitable for children under 14 years.
Basic accessories
Leaf Spring, spare part for 56305, 2-piece set
309805522€25.99
This leaf spring set for 56305 supplies 2 matching replacement parts for a model assembly that uses a paired spring layout. The curved strip shape, central metal insert and mounting holes point to a component made to sit in a defined fixing position, where alignment and matching geometry matter for the surrounding structure. Each piece is formed as a long black arc with the same profile across the pair, making the set suitable where both sides of the relevant assembly need the same part. The central insert creates a reinforced fastening point, while the adjacent holes provide the connection positions required by the 56305 configuration. As a spare part, the set is focused on keeping an existing build complete rather than changing its specification. That makes it useful for repair after wear, for replacing a missing component, or for returning a stored model to running or display condition with the correct paired hardware. The 2-piece format suits workshop drawers, parts boxes and ongoing maintenance setups where model-specific components need to stay ready for later service. For collectors and builders maintaining 56305, this set adds the exact component type named in the designation, with no need to adapt a generic strip or bracket to fit the original mounting points. Warning! Not suitable for children under 14 years.
Basic accessories
LED Mount Set for MAN TGX RC Truck Model
319225121€13.99
The T-Parts LED-Mounts MAN TGX 56325 add model-specific lighting support to a truck build with a set of black molded parts arranged on a sprue. Designed for the MAN TGX 56325, these components create defined mounting points for LED installation and help keep the lighting layout aligned with the structure of the model. The set consists of unassembled accessory parts rather than electronic lighting units, so the focus stays on fit and placement within the build. Visible components include clip-shaped connectors, bracket-like pieces, a ring part, a flat plate with 2 round holes, cylindrical parts with side openings and a larger curved housing-style section. This mix gives the builder several dedicated forms for positioning and securing lighting elements where the truck body needs them. The black finish blends naturally into technical areas of the model and keeps the attention on the vehicle lines once assembled. Used during a MAN TGX build or upgrade, these parts support a tidier custom lighting installation than improvised mounting solutions. They suit builders refining a display truck, updating an existing chassis project or preparing a more detailed road-going RC lorry with added light positions. Warning! Not suitable for children under 14 years.
Basic accessories
LEO2A6 B Parts Set, model accessory for 56020
300005977€23.79
This B parts set is made for the Tamiya LEO2A6 56020 and concentrates on the running gear area, with suspension arm and track roller components arranged on a single molded runner. The 43-piece layout gives builders the exact sprue group needed when a specific section of the model calls for replacement rather than a full new kit. The set is supplied as 1x B parts and matches the designation used for the original build, which helps when checking assembly steps and locating the correct section for repair work. The dark olive green molded frame shown in the product image keeps the parts together until removal, with numbered attachment points that support clear identification during preparation. Circular wheel-related pieces, arm-shaped elements and smaller mechanical connectors are grouped within the runner structure for organized handling at the workbench. This accessory suits restoration of an existing LEO2A6 56020 build, replacement of damaged running gear pieces, or storage as a dedicated spare sprue for later maintenance. It also fits hobby setups where a single suspension section needs attention and the rest of the model remains in service, avoiding the need to source a complete duplicate kit for one component area. Warning! Not suitable for children under 14 years.
Basic accessories
Leopard H-Parts Clear Parts Set for Model Kit
309115143€21.29
The Leopard H-Parts clear set supplies transparent molded components for a model build that depends on crisp see-through detail. The main sprue carries multiple individually formed clear pieces, and the separate cylindrical part adds another dedicated element for restoring or completing the intended exterior finish. The clear runner shows numbered positions that help keep each section identifiable before removal, which matters when several small parts with different shapes are used across one vehicle build. Round discs, angled panels, curved sections and textured inserts point to a mix of detail functions within the same set, all molded in transparent material to preserve light-passing surfaces and visible contours. This format also keeps the parts together until the relevant assembly step, reducing mix-ups while handling fine components at the workbench. Used as a replacement set, these H-Parts can help bring a Leopard model back to its specified appearance after loss, damage or wear to the original clear sections. They also suit careful rebuilds where clean glazing and lens detail make a visible difference across the finished model. The set is aimed at hobby assembly work and fits naturally into repair, restoration and completion tasks for the matching Leopard build. Warning! Not suitable for children under 14 years.
Basic accessories
Leopard P-Parts Fitting Parts, model spare parts
309115144€40.49
Leopard P-Parts Fitting Parts is a spare parts set for Leopard 56020, created for model maintenance, repair and rebuild work. The dark olive-green runner carries multiple molded components still attached to the sprue, so the required sections can be identified before removal and fitted where replacement is needed. Visible shapes include long rods, curved frame elements, rectangular panels, bracket pieces, hook-shaped parts and cross-braced supports, all formed to match the intended assembly area. Molded part numbers appear beside the individual pieces on the frame, adding a practical reference during sorting and installation. The set is not a complete model kit; it is a dedicated source of replacement sections for an existing Leopard 56020 build. The range of shapes on the sprue supports work on structural areas, fitted details and panel sections, which is useful when restoring an older build or replacing damaged components. The molded finish and attached layout also help keep small parts organized until the exact piece is needed. On the workbench, this spare sprue suits careful rebuilds, part swaps and repair sessions where a matching component matters more than improvisation. It also supports collectors maintaining a finished Leopard 56020 model with original-style replacement parts rather than mixed substitutes. Warning! Not suitable for children under 14 years.
Basic accessories
Light Bar Roof/Bumper Parts, Model Accessory Set
319000847€32.99
This model accessory set supplies EE/CC roof and bumper parts for detail-focused vehicle builds, with chrome-plated components that bring a bright metallic finish to visible exterior sections. The sprue layout keeps each piece organised during preparation and helps identify the required part before cutting, test fitting and final installation. The set is centred on shaped trim elements for the upper body and bumper area rather than a complete vehicle, making it useful when a build needs replacement exterior pieces or a more defined finished appearance. The visible runner carries a mix of long curved bars, ring-shaped parts, narrow strips and smaller formed details, giving the builder several distinct components to place across the bodywork. The chrome surface suits display-oriented finishing where reflective accents matter, and the separate parts format supports careful painting, fitting and alignment around surrounding body sections. As a dedicated model supply, it fits naturally into workshop stock for ongoing maintenance or customisation work. On the bench, the parts can be sorted directly from the marked sprue and matched to the relevant mounting points during a repair or fresh build. In a completed display model, the fitted bars and trim pieces help define the roofline and bumper zones with sharper visual contrast against the main body colour. Warning! Not suitable for children under 14 years.
Basic accessories
Lightcases Mirror S770, model parts set
319115540€16.79
Lightcases Mirror S770 brings together small exterior detail parts for vehicle model building, with chrome-plated pieces that give lamp surrounds, mirror sections and trim areas a bright metallic finish on the completed build. The sprue layout shows numbered components arranged for assembly work, including matched left and right shapes that support accurate placement on both sides of the body. Among the visible parts are curved trim sections, lamp housings, larger light cluster elements, thin vertical reflector-style strips and several panel-like inserts in different shapes. Small round inserts add another layer of detail where light assemblies need separate internal pieces rather than a single molded surface. Keeping the components on the runner until use helps sort each numbered section before removal and fitting. The reflective coating also sets these pieces apart visually from painted body panels and other non-plated areas. This set suits builders working on a vehicle model that uses the S770 detail layout and who want defined exterior finishing around lights, mirrors and trim. During assembly, the mirrored pairs and numbered identification points make it easier to match each piece to its position and keep the body detailing balanced across the finished model. Warning! Not suitable for children under 14 years.
Basic accessories
M Parts Highroof w/ Spoiler S770, model parts
319115550€26.49
M Parts Highroof w/ Spoiler S770 focuses on the upper body area of a scale vehicle shell, supplying molded replacement sections that restore the high roof profile and spoiler form with clean, defined contours. The set is shown as white model parts on a sprue, a format that keeps the pieces grouped and easy to sort before cutting, trimming and surface preparation. A technical parts diagram identifies 3 separate sections and shows how they relate to the main body shell, which helps when checking orientation and placement during a repair or rebuild. The main cab shell carries molded door and roof detail, while the additional panels extend the body shape with matching lines across the upper structure. This makes the set useful not only for replacing worn sections, but also for rebuilding a shell that needs the correct roof height and rear profile. The unpainted finish leaves the surface ready for sanding, priming and colour work to match the rest of the model. On the bench, these parts fit naturally into restoration, spare-parts replacement or a fresh body project where accurate panel shapes matter. During test fitting and final finishing, the grouped sprue layout and numbered diagram help keep each section organised and ready for the next build step. Warning! Not suitable for children under 14 years.
Basic accessories
M Parts Radiator Grille, model spare part set
319115370€19.79
This M Parts Radiator Grille set is a dedicated model spare part for the M-B Actros 56335, focused on the front body area where grille and trim sections define the truck's character. The white moulded pieces are supplied on a single sprue, so the matching components stay grouped together before removal and fitting. The runner carries multiple shaped sections, including tall side panels, curved trim pieces and perforated grille-style parts that build up the front fascia in layers. A large circular opening in the upper grille section forms a clear central mounting point within the front assembly. Because the parts are unassembled, each piece can be prepared, trimmed and aligned to the surrounding bodywork during the build or while replacing worn sections on an existing model. This makes the set useful both for planned assembly stages and for restoring a model that needs the correct front-end parts again. On the bench, the sprue format helps keep the individual sections organised until the moment they are needed. During fitting, the shaped contours and grille openings contribute to the defined look expected from a scale truck front, whether the goal is completing the original bodywork or refreshing a used build with the proper M Parts section. Warning! Not suitable for children under 14 years.
Basic accessories
M Parts Roof MB Arocs, model body parts set
319115456€23.49
M Parts Roof MB Arocs brings the key upper-cab shapes for a truck model build into one focused parts set, with a molded roof section, a large cab shell and matching grille elements that define the front view. The white components show recessed panel lines and a clear window opening, giving a solid base for careful preparation, painting and final body finishing. The parts layout shown for 56352 centers on exterior cab details rather than mechanical assemblies, so the work stays focused on fit, surface treatment and visible body contours. Separate grille sections include the central star-marked insert and curved trim pieces that build up the fascia in layers. That arrangement helps builders handle each section individually during cleanup and alignment. The molded shell format also makes this set useful when an existing truck model needs a fresh upper cab section instead of a complete rebuild. On the bench, these pieces suit repair work, restoration of a used build or the next stage of a detailed truck project with MB Arocs bodywork. Once trimmed and finished, the roof, front opening and grille shapes give the cab its recognizable road-going character in display or scale transport scenes. Warning! Not suitable for children under 14 years.
Basic accessories
M-B Actros window parts set, model accessory
319115372€20.49
This accessory set supplies the clear window and sun shield sections for the M-B Actros 56335, making it a practical choice when a model cab needs replacement glazing or fresh transparent trim. The transparent mouldings are presented as injection-formed parts on sprues, with each section kept in place until cutting and fitting begin. The layout shown for this set includes multiple clear panels in different sizes, with larger screen pieces alongside smaller window sections shaped for the cab. That format helps identify each part before removal and supports a more orderly build process when several transparent elements need to be prepared at once. Because these are dedicated S Parts, the set concentrates on the glazing-specific sections rather than general body hardware, which keeps the scope focused on visible cab details. During assembly, clear parts like these are used where the model needs defined window openings, screen areas and a sun shield section that matches the vehicle form. The set suits repair work on an existing build, completion of an unfinished project, or replacement of worn transparent sections where the cab finish needs a cleaner look again. Warning! Not suitable for children under 14 years.
Basic accessories
M-Parts Radiator Grille Deflector Model Parts
319115279€18.99
M-Parts Radiator Grille Deflector 56325 brings body detailing and replacement potential to a compatible scale model build. The set consists of white injection-molded parts supplied on a sprue, with grille-style and deflector-shaped sections that support a clean, defined exterior finish once trimmed and fitted into place. The runner layout keeps the individual sections connected until preparation begins, which helps with part identification and handling at the workbench. Larger body-related pieces and smaller detail elements are molded together, allowing the builder to check placement, compare shapes and plan the fitting sequence before assembly. As a parts set rather than a complete vehicle kit, this reference is suited to repair tasks, restoration work or replacing worn or missing exterior sections on an existing model. The molded surfaces and openings also make it useful where a build calls for more accurate front-end or airflow-related body detail. On the bench, the set fits naturally into projects that involve body refurbishment, parts replacement or careful finishing of a compatible model. It also suits stored spare-part collections where keeping a dedicated grille and deflector reference on hand can simplify later maintenance or rebuild work. Warning! Not suitable for children under 14 years.
Basic accessories
Machine Gun with Mount, plastic model parts
319225067€11.29
This plastic parts set adds a machine gun and mount assembly to selected military model builds, with V/W parts shaped for use with references 56014, 56016 and 56032. The olive-drab sprue presents the components in an organized runner layout, so the weapon station can be prepared as a focused subassembly within a larger vehicle project. The frame holds multiple molded pieces for the gun, bracketry and support structure, allowing careful removal, cleanup and test fitting before final placement. Because the set is supplied as detail parts rather than a complete vehicle kit, it suits restoration work on an unfinished build as well as added surface detail on a compatible model. The molded colour provides a practical starting point for military paint schemes, while the separate parts support precise brush painting across smaller mechanical sections and edges. On the workbench, the compact sprue format keeps the assembly stage clear and easy to manage. In a display scene, the finished gun mount can sharpen the look of an open vehicle interior, a service position or a maintenance setup where visible equipment adds scale character without overwhelming the main build. Warning! Not suitable for children under 14 years.
Basic accessories
Main Plate P Parts for MB Arocs Model Kit
319115458€12.79
This P Parts Main Plate set for the MB Arocs 56352 model kit provides the core plate sections needed when an original build needs replacement structural pieces. The black injection-molded sprue carries multiple unassembled components in one frame, with broad panel shapes, molded openings and raised mounting forms that reflect their role inside the larger assembly. Alongside the two larger plate sections, the runner also holds a long narrow panel and a textured rectangular section that appears suited to a floor, platform or internal support area. The molded connection bars keep the parts organized until removal, while the visible hole pattern and cylindrical posts indicate fixed attachment and alignment positions during assembly. This makes the set useful when restoring a previously built model, replacing damaged sections, or completing a kit that is missing specific structural parts. In a hobby workspace, the sprue format allows each component to be checked against the build stage before cutting and fitting. The matched part geometry helps maintain the intended layout of the MB Arocs 56352 assembly, whether the task is a careful repair or a clean rebuild of the main plate area. Warning! Not suitable for children under 14 years.
Basic accessories
MAN TGX 18.540 Ver.II sticker set, model decals
319495822€20.49
The MAN TGX 18.540 Ver.II sticker set brings finishing detail to a scale truck build with printed markings for the cab exterior, interior and equipment areas. MAN branding, TGX 18.540 model badges, large logo graphics and trim elements help the completed body capture the look of a working road tractor with sharper visual definition across multiple sections. Beyond the main body graphics, the sheet adds smaller details that change how close-up views read. Dashboard and console prints give the cab a more developed cockpit appearance, while letter and number sets allow custom registration combinations. Country code markings extend the range of regional styling options, and caution labels such as HOT! MOTOR, ROTATING PARTS and ON/OFF labels add workshop-style and operating detail where the build calls for it. Reflective boards, warning triangles and textured strip graphics support realistic finishing on rear and step areas. Applied during the final detailing stage, the sheet suits builders who want cleaner visual transitions between painted surfaces and printed markings. It works especially well when the truck is viewed at cab level, parked in a scale yard scene or photographed from close range, where dashboard graphics, badges and safety markings become part of the overall realism. Warning! Not suitable for children under 14 years.