Model AS spray paint
Model AS spray paints: specially developed for aircraft models, offer realistic colour tones and a high-quality, even paint finish for authentic replicas!
AS spray colours
AS-33 Camouflage Gray, paint spray, 100 ml
300086533€12.99
AS-33 Camouflage Gray is a 100 ml paint spray made for model finishing where an even, consistent coat matters across larger surfaces. The spray application helps lay down colour smoothly on broad panels and shaped parts, giving camouflage gray coverage that reads cleanly across the whole build. The 100 ml can size provides a practical amount for workshop use when several parts need the same tone. Spray paint is especially useful on shells, body sections and other exterior components where brush marks would interrupt the final look. Camouflage Gray fits military-inspired colour layouts and other subdued paint schemes that call for a restrained gray tone rather than a bright accent. The aerosol format also supports steady passes over curved contours, corners and recessed areas, which helps keep the finish visually consistent from one section to the next. On the bench, AS-33 Camouflage Gray suits fresh builds, repaint work and replacement parts that need to match an existing scheme. It can be used when a model calls for a single gray base coat or when several painted sections need the same colour family to tie the finished appearance together. Warning! Not suitable for children under 14 years.
AS spray colours
AS-18 Flat Light Grey, spray paint, 100 ml
300086518€12.291 l = €122.90
AS-18 Flat Light Grey (IJA) is a 100 ml spray paint designed for model finishing where an even, subdued grey tone is needed across larger painted areas. The flat finish keeps surfaces non-glossy, which suits subjects that call for a restrained, service-style appearance rather than a reflective coat. The spray format helps distribute paint in a fine, consistent layer over broad sections and shaped parts that are harder to cover cleanly with a brush alone. On aircraft bodies, panels or similar model components, that can help maintain a more uniform colour impression from edge to edge. The AS-18 code also gives builders a clear reference point when following paint guides, planning a specific scheme or returning later for matching work on the same build. The shade name Flat Light Grey (IJA) identifies the intended colour directly, which helps keep finishing steps organised during multi-colour projects. Used during the painting stage of a scale build, this spray suits base coating, full-surface coverage or targeted recolouring of selected sections. In a workshop setup with masking, primed parts and drying space prepared, the 100 ml can supports controlled application across multiple model components in one painting session. Warning! Not suitable for children under 14 years.
AS spray colours
AS-20 Flat Insignia White, spray paint, 100 ml
300086520€12.291 l = €122.90
AS-20 Flat Insignia White is a spray paint for aircraft models, supplied in a 100 ml aerosol can for broad, even colour application. The flat white tone suits schemes that call for a matt surface, giving model aircraft a clean, uniform finish across wings, fuselage sections and other larger panels. The aerosol format changes how the paint reaches the surface: instead of brush contact, the nozzle releases a fine mist that settles across the model in a thin layer. That makes it useful for covering larger areas where visible brush marks would interrupt the look of the build. The can is part of the Tamiya Color range for aircraft, so the paint sits clearly within aircraft-focused finishing work rather than general craft use. The shade name Flat Insignia White (USN) gives a specific reference point for colour planning on naval aircraft subjects and related markings. On the bench, the 100 ml volume supports more than a single pass, whether the task is laying down a main coat, refreshing a section after masking, or matching white areas across several aircraft builds. The compact can stores easily with other finishing supplies and is ready for use whenever a model calls for a smooth matt white application.
AS spray colours
AS-26 Flat Light Ghost Grey, spray paint, 100 ml
300086526€12.291 l = €122.90
AS-26 Flat Light Ghost Grey is a spray paint for model finishing, supplied in a 100 ml can and formulated for quick, even colour application across exterior surfaces. The flat finish gives painted parts a muted look, making it suited to builds that call for a low-sheen grey rather than a reflective coat. The spray format helps cover broad sections such as fuselage panels, body shells or other outer parts with a more uniform layer than hand brushing can usually achieve on large areas. Flat Light Ghost Grey works well where a cool, restrained tone is needed for military, aircraft or technical styling, and the matte surface keeps visual emphasis on panel lines, contours and added detail rather than gloss. The can format also makes it practical to apply several light passes during the painting process, which supports controlled coverage on shaped model surfaces. During a build or repaint session, the 100 ml volume gives useful capacity for base coating, follow-up passes and small correction work on separate components. It fits naturally into finishing stages where colour consistency across multiple parts matters, whether the goal is a fresh overall coat or matching previously painted sections on a scale model.
AS spray colours
AS-27 Flat Gunship Grey 2, spray paint, 100 ml
300086527€12.291 l = €122.90
AS-27 Flat Gunship Grey 2 brings aircraft-focused spray application and a muted flat grey tone into one 100 ml aerosol can, giving model builders a direct way to cover larger airframe sections with an even painted surface. The can format is designed for spray use rather than brush loading, which suits broad areas such as wings, fuselage panels and tail sections. The label identifies this paint as part of the AS range for aircraft, placing it in a finishing category aimed at scale aviation subjects. The Flat Gunship Grey 2 shade suits schemes that call for a restrained grey rather than a glossy surface, and the flat character changes how light sits on the painted model once the coat has dried. The pressurised can dispenses paint through a nozzle mounted at the top, so colour is applied in a fine sprayed layer across the target surface. Hazard pictograms shown on the pack indicate that the contents are flammable and require careful handling during use and storage. On the workbench, this format fits painting sessions where a single colour needs to cover multiple connected parts with a consistent tone. It also suits finishing stages that call for a dedicated aircraft shade in spray form, whether the goal is a full exterior coat or matching adjacent sections on the same build.
AS spray colours
AS-28 Flat Medium Grey, paint spray, 100 ml
300086528€12.291 l = €122.90
AS-28 Flat Medium Grey brings a subdued, non-gloss colour tone to model finishing, with a spray format that helps lay down an even coat across larger surfaces and shaped sections. The 100 ml can suits bench work where a consistent grey is needed for body panels, structural parts or coordinated repainting. The flat finish keeps reflections low, so panel lines, edges and added surface detail remain visually clear after painting. Medium grey fits naturally into military, mechanical and industrial schemes, and it also serves as a useful neutral base for layered weathering, accent colours or further detailing. The aerosol format supports steady application over curved shells, broad side panels and other model parts that benefit from continuous coverage rather than brush strokes. AS-28 also helps keep colour matching consistent when several sections of the same build need the same tone. On the workbench, this shade suits full-colour coats, selective refinishing and touch-up tasks where a clean matte grey is the target. It also fits projects that combine painted assemblies with decals, panel accents or weathered finishes, giving model surfaces a restrained and technical character.
AS spray colours
AS-16 Flat Light Grey, spray paint, 100 ml
300086516€12.291 l = €122.90
AS-16 Flat Light Grey brings a matt light grey aircraft colour into a 100 ml aerosol can, giving model builders a ready spray format for broad, even coverage on scale surfaces. The spray action applies paint through the nozzle rather than by brush, which suits wings, fuselage panels and other larger sections where a uniform coat matters. The shade is identified as Flat Light Grey USAF, making it a specific colour choice within aircraft finishing rather than a general workshop paint. The can is labelled as an aerosol paint and the safety data identifies the contents as light grey in colour. This format supports model work that calls for consistent surface tone across multiple adjoining parts. On aircraft builds, that can mean laying down a base colour, refining panel areas or matching surrounding sections during finishing work. Used at the painting stage of a scale build, the aerosol format fits sessions where separate parts are coated before final fitting or where assembled airframes need an overall colour pass. The 100 ml volume gives a practical amount for repeated hobby use across more than one painting session. Warning! Not suitable for children under 14 years.
AS spray colours
AS-5 Flat Light Blue, paint spray, 100 ml
300086505€12.291 l = €122.90
AS-5 Flat Light Blue is a paint spray for model finishing, supplied in a 100 ml can and matched to a Luftwaffe colour tone. The flat finish gives aircraft builds a muted surface appearance that suits military subjects and helps avoid unwanted gloss on completed exterior panels. The spray format is suited to covering larger model sections where brush application can leave visible overlap, especially on wings, fuselage halves and tail surfaces. Used in light passes, the paint can build an even coat while keeping panel lines and surface moulding visually clear. The clearly named AS-5 designation also makes colour selection straightforward when a build calls for a specific military shade rather than a general blue. On the workbench, this paint fits naturally into aircraft assembly, restoration and repainting tasks where a consistent exterior tone matters across several parts. It can be used when finishing a new scale model, refreshing an older display piece or matching replacement sections to an existing Luftwaffe scheme.
AS spray colours
AS-21 Flat Dark Green 2, aircraft spray paint
300086521€12.291 l = €122.90
AS-21 Flat Dark Green 2 is an aircraft spray paint designed for model finishing, combining a ready-to-spray aerosol format with a flat military shade that settles into an even coat across larger surfaces. The 100 ml can supports quick coverage on wings, fuselage sections and tailplanes, where brush marks can interrupt a clean scale finish. The colour designation Flat Dark Green 2 with the IJN reference gives this spray a clear role in aircraft painting projects that call for a specific dark green tone. The aerosol nozzle releases paint in a fine mist, which helps when laying down base coats, building camouflage areas or refreshing painted sections on assembled models. The flat finish also creates a suitable surface for later weathering steps and for adding markings over a non-gloss layer. As part of the Tamiya Color For Aircraft range, the can is aimed at hobby work where colour accuracy and controlled application matter. On the bench, the spray format suits builders preparing multiple airframe sections in sequence as well as single-part repainting jobs. It fits naturally into aircraft model projects that move from primed surfaces to colour coats and then on to detail finishing, with the 100 ml volume offering useful capacity for repeated workshop use.
AS spray colours
AS-22 Flat Dark Earth, spray paint, 100 ml
300086522€12.291 l = €122.90
AS-22 Flat Dark Earth brings a matte brown tone to scale model finishing in a 100 ml spray can, giving larger surfaces a consistent coat and a clean, even appearance during paint work. The spray format suits broad body panels and shaped exterior sections where brush marks would interrupt the final look. The AS paint designation identifies this shade clearly within a colour plan, which helps when a build calls for a specific earth-toned finish or later matching work on the same model. Flat Dark Earth reads as a muted, non-gloss colour, making it suitable for military subjects, field equipment themes, and other schemes that rely on a restrained surface effect. The aerosol application supports steady coverage across contours, edges, and recessed areas when used as part of a model painting routine. On the workbench, this 100 ml can fits projects that need a dedicated base colour as well as follow-up correction on individual sections. It suits builders who prepare, paint, and refine scale models in stages, keeping the chosen AS-22 tone available for continued finishing work across the same project.
AS spray colours
AS-29 Flat Grey Green, spray paint, 100 ml
300086529€12.291 l = €122.90
AS-29 Flat Grey Green is a 100 ml spray paint created for model finishing where a muted, flat colour is needed across larger exterior surfaces. The spray format supports fast, even application on shells, panels and shaped parts, helping builders lay down a consistent coat with the subdued look that suits scale subjects. The Flat Grey Green tone fits especially well where military, aircraft or utility vehicle colour schemes call for a restrained, non-gloss finish. In model work, that flatter surface appearance can reduce the visual harshness that a shiny coat brings to scale details, so panel lines, contours and overall proportions read more naturally. The aerosol format also helps carry colour into edges, curves and recessed areas that are harder to cover evenly with a brush. On the bench, this paint suits new colour work, touch-ups and repainting of individual sections that need to stay visually consistent with the rest of the build. The 100 ml can size gives enough material for repeated finishing sessions across different model projects or for keeping a specific reference shade close at hand.
AS spray colours
AS-6 Flat Olive Drab, paint spray, 100 ml
300086506€12.291 l = €122.90
AS-6 Flat Olive Drab (USAAF) is a 100 ml paint spray for scale modelling work that calls for a muted military colour and a flat surface finish. The spray format suits broad exterior sections where an even coat and steady colour application matter, whether the focus is an aircraft fuselage, wing panels or other large model areas. The designation Flat Olive Drab (USAAF) gives this colour a specific place within military finishing rather than a generic green tone. In practical use, the flat finish reduces shine on the painted surface, which helps preserve the subdued appearance associated with service aircraft schemes. The 100 ml can size provides a clear reference for planning paint use across single builds or touch-up work on larger assemblies. Within a modelling bench setup, a dedicated spray colour like AS-6 also keeps the finishing stage streamlined when a brush-painted texture is not desired. This paint spray fits naturally into build sessions that move from surface preparation to colour coating and final detailing. It can be used when a model needs a uniform base colour before markings are added, or when a military subject calls for a consistent olive drab finish across multiple exterior sections.
AS spray colours
AS-7 Flat Natural Grey, paint spray, 100 ml
300086507€12.291 l = €122.90
AS-7 Flat Natural Grey (USAAF) is a 100 ml paint spray for model finishing, combining a military grey tone with the speed and reach of aerosol application. The flat finish keeps the painted surface free from shine, which suits aircraft subjects and other builds that call for a subdued colour impression. The AS-7 designation gives builders a specific reference when matching paint steps across a project or returning later for additional coats. Aerosol delivery helps lay colour across wider sections more quickly than hand brushing, especially on wings, fuselage panels and other broad model surfaces. The 100 ml can size offers a practical amount for planned paint sessions, whether covering a main exterior colour or handling smaller correction work after assembly. The colour name Flat Natural Grey (USAAF) points to a defined shade within the range rather than a generic grey, which helps when a build calls for a precise paint selection. On the bench, the spray format suits primed parts that need an even outer coat before decals or further finishing stages. It also fits repainting individual sections where a uniform flat grey surface is needed to keep the overall model appearance consistent.
AS spray colours
AS-9 Flat Dark Green RAF, paint spray, 100 ml
300086509€12.291 l = €122.90
AS-9 Flat Dark Green RAF brings a military aircraft colour tone into a 100 ml spray can that suits broad, even coverage on scale model surfaces. The flat finish keeps reflections low, so panel shapes and camouflage areas read cleanly once the paint has dried. The spray format helps cover larger sections faster than hand brushing and supports a more uniform layer across wings, fuselage parts and other exterior components. As part of the AS paint range, this shade is positioned for aircraft modelling and colour-specific finishing work. The can is labelled AS-9, which makes it easy to identify the exact tone during workshop storage or when matching later touch-up work. Hazard pictograms on the pack indicate that careful handling is required during use and storage. Paints are required separately only as needed for other colours in a build. On the bench, AS-9 Flat Dark Green RAF fits naturally into camouflage layouts, repainting tasks and correction work after sanding or surface preparation. It also serves as a dedicated colour option for builders who keep several aircraft shades ready for staged painting across different model projects.
AS spray colours
AS-10 Flat Ocean Grey, paint spray, 100 ml
300086510€12.291 l = €122.90
AS-10 Flat Ocean Grey brings a muted RAF colour tone to scale model finishing in a 100 ml spray can that suits broad, even coverage across larger exterior sections. The flat finish keeps reflections low, so panel lines, contours and surface shaping remain visually clear once the colour is applied. The spray format is useful where a brush would leave a more broken surface across wings, fuselages, hulls or body sections. A 100 ml fill gives a practical amount for repeated passes on multiple parts within the same scheme. The designation AS-10 makes this shade easy to identify within a paint collection when a specific military grey is needed for matching or touch-up work. The can is marked with hazard pictograms for flammable, irritant and corrosive properties, so handling belongs in a controlled model-making setup with appropriate storage and care. On the bench, this paint suits builders working through aircraft camouflage, vehicle refinishing or other projects that call for a restrained grey with a flat look. It also fits organised workshop use, where clearly labelled colour cans help keep finishing steps consistent across separate assemblies and later detail work.
AS spray colours
AS-12 Flat Bare Metal Silver, paint spray, 100 ml
300086512€12.291 l = €122.90
AS-12 Flat Bare Metal Silver is a 100 ml paint spray for model finishing, combining a flat metallic tone with the speed of aerosol application. The colour gives parts a bare metal silver appearance without a glossy sheen, which suits builds that call for a restrained technical look on larger sections. The spray format helps cover broad panels, shells and shaped components in a continuous coat, especially where brush painting can leave visible strokes along edges and recesses. The flat finish changes how light sits on the painted surface, keeping reflections softer and letting panel shapes, moulded lines and structural details stay readable. Within a model workshop setup, this makes AS-12 useful for projects that need a silver tone with a more subdued character than bright chrome-style colours. It fits naturally into painting stages for scale vehicles, mechanical subjects and other hobby builds where separate parts are prepared, coated and left to cure before final assembly. Used on body sections, covers or exterior details, the 100 ml can supports repeated passes across multiple components while keeping the colour consistent through the same project. Warning! Not suitable for children under 14 years.
AS spray colours
AS-14 Flat Olive Green, paint spray, 100 ml
300086514€12.291 l = €122.90
AS-14 Flat Olive Green (USAF) is a paint spray for model finishing, supplied in a 100 ml can for direct colour application. The flat olive tone gives painted surfaces a subdued military look that suits scale subjects where a low-sheen finish is part of the visual character. The aerosol format helps lay down colour across wider sections with a more even coat than hand brushing, especially on fuselage panels, body shells, or other broad exterior areas. The AS-14 designation gives the shade a clear reference point within a paint lineup, which helps when a build calls for the same colour again or when several stages of painting need a consistent match. As a modelling supply, this spray is intended for the finishing stage, where colour choice and surface coverage shape the final appearance of the build. On the bench, the 100 ml volume suits planned paint sessions where multiple passes may be needed to build coverage gradually. It fits naturally into aircraft, military vehicle, and other scale painting projects that call for a flat olive shade with a restrained, service-style appearance. Warning! Not suitable for children under 14 years.
AS spray colours
AS-19 Flat Intermediate Blue, paint spray, 100 ml
300086519€12.291 l = €122.90
AS-19 Flat Intermediate Blue is a paint spray for aircraft models that combines a flat finish with direct aerosol application, making it suited to broad outer surfaces where an even coat matters. The 100 ml can format keeps the colour ready for workshop use, whether the task is covering a wing section, refining a fuselage area or matching separate painted parts. The AS series is intended for aircraft finishing, and this shade is identified as Intermediate Blue for USN schemes. The aerosol nozzle releases the paint as a spray rather than a brush coat, which helps lay colour across larger panels with fewer visible transitions between passes. The can carries the Tamiya Color for Aircraft marking, placing it clearly within a model finishing range focused on aviation subjects. The flat surface effect keeps the colour subdued rather than glossy, which suits military aircraft subjects where a muted appearance is part of the final look. On the bench, the can fits naturally into painting stages such as base coating exterior panels, correcting assembled sections or bringing separate components into the same colour match. It also works well when a build calls for one consistent blue tone across wings, tail surfaces and fuselage areas in a USN aircraft scheme. Warning! Not suitable for children under 14 years.
AS spray colours
AS-2 Flat Light Grey, spray paint, 100 ml
300086502€12.291 l = €122.90
AS-2 Flat Light Grey (IJN) is a spray paint for model finishing, supplied in a 100 ml can for direct application during painting work. The flat light grey tone gives scale projects a non-gloss surface appearance, which suits subjects that call for a muted military-style colour treatment. The AS designation identifies this paint within Tamiya's spray range, and the IJN colour reference gives the shade a specific modelling context rather than a generic grey label. Spray delivery helps lay down colour across broad panels, curved sections and shaped parts with a more even pass than hand brushing alone. The flat finish keeps reflections low, which helps surface detail remain visually clear after painting. For builders planning a multi-step finish, the 100 ml volume provides enough paint for larger sections while leaving reserve for later corrections or additional coats. On the workbench, this paint fits naturally into aircraft, vehicle and other scale-model painting routines where a defined grey tone is needed. It can be used when establishing a base colour, refreshing a previously painted section or matching separate components so the finished model reads as one consistent build.
AS spray colours
AS-23 Flat Light Green, aircraft spray paint
300086523€12.291 l = €122.90
AS-23 Flat Light Green brings a flat aircraft finish to model painting with a pressurised aerosol format and a colour reference aimed at German Air schemes. The 100 ml can lays down paint in a broad, continuous spray, which helps cover larger aircraft sections with a more consistent surface than hand brushing alone. The can is part of the AS paint range for aircraft models, so its use is focused on scale aviation subjects rather than general craft work. The flat finish keeps reflections low on completed surfaces, which suits military liveries and scale display builds. The spray nozzle releases paint directly from the can, allowing quick coverage on wings, fuselage sections and tail assemblies with fewer interruptions between passes. The labelled AS-23 colour code also makes it easier to match the same shade across separate painting stages or later touch-up work on the same build. On the bench, the aerosol format suits primed subassemblies, complete airframes and repaint work on selected sections that need the same light green tone. The can works well when a build calls for broad colour coverage before masking lines, insignia or weathering layers are added. Paint application should follow the handling and warning information printed on the container.
AS spray colours
AS-25 Flat Dark Ghost Grey, spray paint, 100 ml
300086525€12.291 l = €122.90
AS-25 Flat Dark Ghost Grey brings a flat aircraft colour into a 100 ml spray can, giving model finishing work a fast way to cover larger exterior sections with a consistent grey tone. The aerosol format suits broad passes across fuselage panels and wing surfaces where an even visual finish matters. The Tamiya Color For Aircraft line is presented specifically for aircraft models, making this shade a focused choice for aviation subjects rather than a generic craft paint. The flat finish keeps reflections low, which helps preserve the restrained look often associated with military and service aircraft schemes. The spray nozzle and pressurised can are built around direct application, so colour is laid down by sweeping passes instead of brush strokes. That handling method can reduce visible streaking on larger panels and helps keep the surface appearance uniform across connected sections. The can is labelled with a net volume of 100 ml, giving a clear reference for workshop planning and repeat use across multiple painting sessions. On the bench, AS-25 fits into priming and colour-coat workflows for aircraft builds, especially when wings, tailplanes or fuselage halves need the same tone across wide areas. It also suits touch-up or repaint work on previously assembled display models where a flat grey finish is required.
AS spray colours
AS-4 Flat Grey Violet, paint spray, 100 ml
300086504€12.291 l = €122.90
AS-4 Flat Grey Violet is a 100 ml paint spray for model finishing, supplied in a ready-to-use aerosol can and specified for Luftwaffe colour applications. The flat tone gives aircraft surfaces a subdued appearance that suits military subjects, especially where a matt painted finish is part of the final look. The spray format is useful when larger sections need an even coat, such as wings, fuselage panels or tail assemblies. A broad mist reaches recessed and open areas more quickly than brush application, which helps maintain a consistent colour layer across the model. The 100 ml content gives enough material for repeated finishing work on compatible builds or for returning to the same shade during later workshop sessions. The AS-4 designation also makes the colour easy to identify within a paint collection when a specific scheme is being planned. On the bench, this shade fits projects that recreate Luftwaffe aircraft markings and exterior tones, whether the task is a full repaint or selected surface coverage. It also works well when a build calls for a restrained, non-gloss visual finish that keeps panel shapes and added weathering in clear view.
AS spray colours
AS-8 Flat Navy Blue, paint spray, 100 ml
300086508€12.291 l = €122.90
AS-8 Flat Navy Blue brings a military-style colour match into model finishing with a flat surface effect and a 100 ml spray can that suits broad, even application. The US Navy shade gives aircraft and other scale subjects a restrained, non-gloss look that fits painted panels, outer surfaces and larger body sections. The aerosol format is geared to coating wider areas more quickly than brush application, which helps maintain a consistent tone across connected surfaces. Flat Navy Blue works where a subdued finish is needed rather than a reflective one, keeping the painted result visually aligned with military schemes. The 100 ml content gives enough paint for repeated use across separate stages of a build, from first colour coats to later touch-up work on matching sections. As part of the AS paint spray range, this colour sits clearly within a model-making workflow focused on surface preparation, colour accuracy and clean coverage. On the bench, the can suits painting sessions where wings, fuselage parts or hull sections need one continuous shade across multiple components. It also fits detail-led projects that call for a specific navy tone in a flat finish, whether the goal is a fresh painted look or a base for further weathering work.
AS spray colours
AS-1 Flat Dark Green, paint spray, 100 ml
300086501€12.291 l = €122.90
AS-1 Flat Dark Green is a paint spray for model finishing, supplied in a 100 ml can and specified as IJN for subjects that require this exact colour reference. The aerosol format helps cover larger exterior sections with a steady coat, giving builds a flat surface appearance that suits military aircraft and other scale projects. Within the AS paint spray range, this shade serves builders who want a dedicated dark green rather than mixing tones by hand. The flat finish reduces unwanted sheen on completed surfaces, which helps panel lines, contours and markings remain visually clear after painting. A spray can also reaches broad body sections quickly, making it useful when the goal is an even outer coat across wings, hulls or similar model parts. The 100 ml content keeps the quantity clearly defined for planning a single build or reserving paint for later corrections. On the workbench, AS-1 Flat Dark Green fits naturally into preparation, base coating and final colour application for scale modelling sessions. It can be kept alongside masking materials, primers and finishing supplies as a dedicated IJN dark green option when a project calls for a precise, ready-named shade.
AS spray colours
AS-11 Flat Medium Sea Grey, spray paint, 100 ml
300086511€12.291 l = €122.90
AS-11 Flat Medium Sea Grey brings a classic RAF-inspired matt grey tone to model finishing in a 100 ml aerosol can. The spray format lays colour across broad panels, curved sections and recessed areas with a more even coat than brush application can usually achieve on larger surfaces. This paint is identified as spray paint for colour work on polycarbonate bodies, making it a practical choice when a uniform grey finish is needed on model shells and similar parts. The matt character keeps reflections low, which helps the colour read with the subdued look associated with military schemes. The can contains 100 ml, giving enough material for repeated passes across larger sections rather than only detail touch-ups. In the safety data, the contents are classified as an aerosol and the colour is stated as grey. On a workbench, AS-11 suits repainting a body shell, covering a single panel tone, or matching an RAF-style scheme across a full model surface. Use belongs in well ventilated areas, with the pressurised aerosol kept away from heat and open flames during spraying and drying. Warning! Not suitable for children under 14 years.
AS spray colours
AS-13 Flat Green (USAF), spray paint, 100 ml
300086513€12.291 l = €122.90
AS-13 Flat Green (USAF) is a 100 ml spray paint for scale model finishing, combining a military aircraft colour reference with the speed and reach of aerosol application. The flat finish suits subjects that call for a muted surface rather than a reflective sheen, and the spray format helps lay colour across larger sections with a consistent visual result. The USAF shade designation gives the colour a clear modelling context for aircraft builds and related military schemes. Broad areas such as wings, fuselage panels or exterior shell sections can be coated more quickly than with brush painting, which is especially useful when an even colour field matters to the final appearance. The 100 ml can size also makes the paint easy to place alongside other finishing supplies on the workbench without taking much room. As part of the AS paint spray line, this colour fits naturally into projects that rely on named reference shades instead of mixed custom tones. On the bench, AS-13 Flat Green (USAF) suits fresh builds, repaints and touch-up work on compatible model surfaces. It also works well when a project needs a uniform base colour before further weathering, masking or detail painting steps are added. Warning! Not suitable for children under 14 years.
AS spray colours
AS-15 Flat Tan USAF, aircraft spray paint, 100 ml
300086515€12.291 l = €122.90
AS-15 Flat Tan USAF is a 100 ml spray paint for aircraft models, built for broad, even colour application with the speed and reach of an aerosol can. The flat tan shade suits military aviation subjects where a muted surface finish supports the look of service paint rather than a glossy display coat. The can is part of the AS paint range for aircraft work, making it a focused choice for model builders finishing fuselage sections, wings and other larger parts. Pressurised delivery lays colour down in a fine mist, which helps cover shaped surfaces more quickly than hand brushing on wide panels. The flat finish also provides a subdued base for further detailing, weathering or decal work where a low-sheen surface fits the subject. With 100 ml in the can, there is useful capacity for complete exterior colour passes on many scale aircraft builds. On the bench, AS-15 Flat Tan USAF fits naturally into painting sessions that move from primed parts to final exterior colour. It suits builders working on military aircraft schemes who want a dedicated spray shade for broad coverage, consistent tone and a clean, uniform finish across the model. Warning! Not suitable for children under 14 years.
AS spray colours
AS-17 Flat Dark Green, spray paint, 100 ml
300086517€12.291 l = €122.90
AS-17 Flat Dark Green brings an even spray pattern and a military-style flat finish to aircraft model painting, with a 100 ml aerosol can that suits broad surface coverage on wings, fuselage panels and tail sections. The pressurised format applies paint through the nozzle as a fine mist, which helps lay down colour across larger areas more quickly than brush application. The can is labelled Tamiya Color For Aircraft, placing it within a paint range developed for aircraft model finishing rather than general craft use. The Flat Dark Green shade is identified as IJA, giving builders a specific reference within military aircraft colour work. The dark green cap provides a direct visual cue for the colour inside, while the AS-17 code helps keep paint racks and bench storage organised during longer build and finishing sessions. As an aerosol paint, it is supplied in a sealed metal can with 100 ml net volume. This spray paint fits the stage where assembled parts are ready for surface colour, whether covering a full airframe, refining camouflage sections or revisiting selected panels after masking. On the bench, the can format supports steady passes across larger model surfaces and helps maintain a uniform look across separate components painted in the same shade. Warning! Not suitable for children under 14 years.
AS spray colours
AS-3 Flat Grey Green, paint spray, 100 ml
300086503€12.291 l = €122.90
AS-3 Flat Grey Green is a 100 ml paint spray for model finishing, supplied in a ready-to-use aerosol format that lays colour down quickly across broad surfaces. The Flat Grey Green tone is identified in the data as Luftwaffe, giving aircraft projects a specific military shade rather than a generic green and helping keep the visual character of the scheme consistent from panel to panel. The spray format suits work on larger sections such as wings, fuselage parts and other shaped components where an even coat matters. A matt colour like AS-3 Flat Grey Green can support the look of scale aircraft subjects by reducing shine and keeping surface detail visually clear once the coat is applied. Within the AS range, this can is positioned as a dedicated finishing colour rather than a mixed set, so the full 100 ml content is focused on one shade for repeat use across matching builds or touch-up work on the same scheme. On the bench, the aerosol format keeps application direct and compact, whether covering a main airframe colour or refining separate sections before final assembly. It also fits neatly into paint planning for military aviation subjects where a named shade helps align different parts of the build under one consistent finish.
AS spray colours
AS-30 Flat Dark Green 2, aircraft spray paint
300086530€12.991 l = €129.90
AS-30 Flat Dark Green 2 brings an RAF-focused aircraft colour into a ready-to-spray 100 ml aerosol can, giving model builders a direct way to cover fuselage panels, wings and other exterior sections with a flat finish. The spray format helps paint reach curved shapes and recessed areas that are slower to cover with a brush alone. The can is part of the Tamiya Color for Aircraft range and is presented specifically for aircraft model finishing rather than general craft use. Its pressurised nozzle releases the paint as an aerosol, which supports broad, even passes across larger surfaces and steady colour application on panelled airframes. The Flat Dark Green 2 shade suits camouflage work, repainting individual sections and refining colour separation on military aircraft subjects where a muted green tone is required. The 100 ml volume also gives practical capacity for more than a single small touch-up task. On the workbench, AS-30 fits naturally into priming and finishing routines for scale aircraft builds, whether the goal is a full exterior coat or targeted repainting of selected areas. The can works best where smooth coverage, consistent tone and efficient application matter across shaped model parts.
AS spray colours
AS-31 Flat Ocean Grey 2, spray paint, 100 ml
300086531€12.991 l = €129.90
AS-31 Flat Ocean Grey 2 brings a dedicated aircraft colour into a 100 ml aerosol format that lays paint down by spray rather than brush, helping model surfaces take on an even matt finish across wings, fuselage sections and other larger areas. The Flat Ocean Grey 2 (RAF) shade suits military aircraft schemes where a muted surface tone matters as much as the colour itself. The can is part of the AS paint range for aircraft models and is designed for spray application through a pressurised nozzle. Light passes help build coverage gradually on prepared parts, which is useful around panel lines, curved sections and broad exterior surfaces that can show brush marks more easily. The visible can marking identifies it as Tamiya Color for Aircraft, and the 100 ml fill gives practical volume for repeated finishing work across a build. Model materials named in the product data include metal and glass. On the bench, the spray format fits base coating before detail work, repainting selected sections, or matching separate assemblies before final display. The flat grey-blue tone works especially well where a restrained RAF-style surface is needed and where a gloss effect would look out of place on the finished aircraft.
AS spray colours
AS-32 Flat Medium Sea Grey 2, aircraft spray paint
300086532€12.991 l = €129.90
AS-32 Flat Medium Sea Grey 2 brings an aircraft-focused colour into model finishing with a flat RAF shade and a pressurised aerosol format. The spray can applies paint as a fine mist, which helps cover wings, fuselage panels and other broad sections with a more uniform surface than hand brushing alone. The 100 ml content gives useful capacity for repeated passes across larger assemblies and for keeping colour continuity between separate parts. The flat finish suits military aircraft subjects where a low-sheen surface is part of the visual effect. The nozzle format supports quick, controlled application on primed model surfaces, while the can design keeps the paint ready for direct spray use rather than decanting before each session. As an AS series colour for aircraft, this shade fits naturally into camouflage layouts, panel work and repainting tasks where a specific grey reference matters. On the bench, AS-32 works well when a build reaches the painting stage and broad exterior areas need consistent colour coverage. It also suits restoration or correction work on existing aircraft models, where matching an RAF grey tone can help bring separate sections back into a coherent finish.
AS spray colours
AS-24 Flat Dark Green, paint spray, 100 ml
300086524soon available again
AS-24 Flat Dark Green brings a muted military-style finish to model painting work, with a spray format that lays colour across larger sections in a smooth, continuous pass. The 100 ml can suits bench setups where even coverage and a consistent tone matter on aircraft surfaces and other scale parts. The shade is identified as German Air, making it a clear match for historically styled aviation schemes where a flat surface is needed instead of a reflective sheen. As part of the AS paint spray range, it is shaped around model finishing rather than general household use, which keeps the focus on scale colour application and clean visual results. The aerosol format helps reach broad panels, wings, fuselage sections and similar shapes with fewer visible stroke lines than hand brushing. A single can also keeps the same colour reference available for follow-up coats, corrections and later detail work on matching sections. On the workbench, AS-24 fits naturally into painting sessions that move from primed parts to final colour coats. It also works well for restoring worn areas on an existing build, where the same flat dark green tone is needed to keep the overall finish visually consistent.