Model kit masking tape
For sharp edges and perfect paintwork: our model kit masking tapes and adhesive tapes are the ideal helpers for precise masking work. Whether fine lines or large surfaces, with these products, you will succeed in every step of your work cleanly and professionally. Indispensable for precise modelling projects!
Model-making masking tapes
1mm Masking Tape, model masking tape, 18m roll
300087206€5.791 m = €0.32
This 1 mm masking tape is made for modelling work that calls for narrow, accurate paint separation. The thin tape format follows fine contours and small sections closely, helping create sharp lines on painted and unpainted scale models. Its strong adhesive backing holds well even on uneven surfaces, which is useful around raised details, edges and shaped body sections where wider masking material can be harder to place cleanly. The tape is designed not to absorb paint colour and not to leave unsightly marks, so the masked edge stays defined and the finished surface keeps a cleaner look after removal. With a roll length of 18 m, there is enough material on hand for repeated striping, trim work and detail masking across longer build and finishing projects. The narrow 1 mm width suits fine borders, accent lines and small-area coverage on scale plastic models and radio control models. It fits naturally into paint preparation, body finishing and detail work, whether the task is isolating a slim section before spraying or protecting an adjacent painted area during careful touch-up work.
Model-making masking tapes
2mm Masking Tape, model supply, 18m adhesive roll
300087207€5.791 m = €0.32
This 2 mm masking tape brings fine control to model painting where narrow lines and tidy colour separation matter. The thin tape format follows edges closely and helps create sharp, crisp borders on painted surfaces, whether the task is outlining trim, isolating small sections or protecting adjacent areas during finishing work. Its adhesive layer is designed for modelling use and holds well even on uneven surfaces, which is useful around contours, panel shapes and small raised details. The tape also resists absorbing paint colour, helping maintain a clean barrier while work is in progress. That combination supports accurate masking on both unpainted parts and already finished sections where neat transitions are needed. The translucent amber roll format also makes it easier to place short lengths with visual control during detailed work. With 18 m on the roll, the tape suits repeated use across multiple sessions at the bench, from body detailing on radio control models to careful paint separation on scale plastic builds. It can be applied for narrow stripes, edge definition and small-area masking wherever a broader tape would cover too much surface.
Model-making masking tapes
Masking Sticker (5), model masking sheets 240x180mm
300087130€11.491 m² = €51.07
This pack of 5 Tamiya Masking Sticker sheets gives model and craft work a clean starting point for controlled paint application. Each sheet measures 240 x 180 mm, providing enough area to cut broad covers, narrow strips or shaped sections for specific zones on a surface. The flat sheet format suits jobs where ready-cut tape widths do not match the outline that needs to be covered. The masking sheets are intended for painting tasks on R/C models, static models and craft creations. Sections can be cut to follow body contours, panel shapes or small detail areas before paint is applied, helping keep neighbouring sections separate during multi-colour work. The plain yellow sheet form also makes it easy to plan cuts visually before lifting the chosen shape from the backing. For repeated layouts, several matching pieces can be prepared from the same 240 x 180 mm sheet. On model bodies, scale parts or general hobby surfaces, the sheets support custom masking where standard rolls may be less practical. They fit neatly into painting setups that call for sharp edges, blocked sections or individually shaped covers, whether the task is a single accent area or a more complex layered finish. Warning! Not suitable for children under 14 years.
Model-making masking tapes
Masking Sticker, 240x180 mm, model craft sheets
300087129€11.991 m² = €53.29
These masking sticker sheets bring clean coverage and measured cutting to painting work on R/C models, static models and craft creations. Each pack contains 5 sheets, and every sheet measures 240 x 180 mm, giving enough surface for broad masked sections as well as narrow strips cut to size. A printed grid runs across the sheet surface, making it easier to mark out straight lines, repeated widths and consistent shapes before the material is trimmed. That layout is useful when paint schemes call for parallel edges, evenly spaced sections or matched pieces across more than one part. The adhesive sheet format also supports selective coverage on curved or flat areas where only certain sections need to stay clear during painting. On a workbench, the sheets can be cut into long bands for body lines, smaller blocks for detail zones or custom shapes for one-off graphics on model parts and craft builds. The 240 x 180 mm size leaves room to plan several pieces from one sheet, while the 5-sheet pack keeps extra material ready for later colour stages, corrections or a second project. Warning! Not suitable for children under 14 years.
Model-making masking tapes
Masking Tape Sheets, paint masking film 2-pack
300053416€5.891 m² = €61.35
These masking tape sheets bring precise paint control to model finishing with 2 large 200 x 240 mm film sheets that can be marked, cut and applied exactly where a paint boundary needs to sit. The flat sheet format suits custom templates, from long straight separations to curved sections and angled shapes across body panels and other detailed surfaces. The film is intended for masking work in model making and supports sharp, clear paint lines even when a heavier paint application is used. A printed 1 mm grid version is mentioned for the sheet range, making measured cuts possible where that variant applies. For multi-colour paintwork such as camouflage patterns, the film can also be placed on surfaces that have already been painted, allowing layered colour planning without disturbing the coat underneath. After painting, the film lifts away without leaving residue on the masked area. In practical use, the sheets suit custom paint jobs, edge definition and one-off masking shapes that standard roll widths cannot match. Scope of delivery: 2x masking film. Warning! Not suitable for children under 14 years.
Model-making masking tapes
Masking Tape with Plastic Sheeting, 550 mm
300087164€12.99
This masking tape with pre-attached plastic sheeting combines edge definition and broad surface coverage in one roll. When unfolded, the clear sheeting reaches 550 mm width, making it suited to paint work that needs more than a narrow tape line, such as covering larger sections of R/C car bodies during spraying. The tape attaches securely to the surface being covered, helping protect adjacent areas from unwanted paint while keeping the masked line clean and sharply defined. The transparent sheeting extends that protection across a wider area without needing separate film and tape, which streamlines preparation before colour coats or detail work. With a total roll length of 10 m, the material supports repeated use across multiple painting sessions or longer continuous sections. In practical use, the roll can be unspooled along rooflines, side panels or other broad sections where overspray needs to stay contained. It also suits general model finishing tasks that call for a crisp paint boundary and quick coverage of nearby surfaces, then lifts away easily once the painted area is complete. Warning! Not suitable for children under 14 years.
Model-making masking tapes
6mm Masking Tape Refill, model supply, 18m roll
300087033€2.891 m = €0.16
This 6 mm masking tape refill is made for model finishing where narrow coverage and crisp paint separation matter. The thin tape follows edges closely and adheres well even on uneven surfaces, making it useful for curves, raised details and tight sections on scale builds. Its strong adhesive layer holds the tape in place while paint is applied, yet the material is designed not to absorb colour or leave unsightly marks behind. That combination supports cleaner transitions between painted areas and helps preserve the surface appearance on both painted and unpainted parts. With a roll length of 18 m, the refill suits repeated use across multiple sessions, whether masking body lines, window frames, trim sections or small detail zones that need a precise boundary. The narrow format fits hobby benches where careful control matters more than broad coverage. It can be used on scale plastic models and radio control models when sharp lines are needed for multi-colour finishes, touch-up work or staged painting steps. The refill format also makes it a practical choice when an existing tape dispenser or holder is already part of the modelling setup.
Model-making masking tapes
Masking Tape 10mm/18m Refill for Model Painting
300087034€4.091 m = €0.23
This masking tape refill combines a thin tape profile with strong adhesion for model painting work that calls for control at the edge. With a width of 10 mm and a roll length of 18 m, it covers repeated masking tasks on scale builds while staying easy to position along trim, panel breaks and other painted sections. The adhesive layer conforms well to uneven surfaces, which helps when the masking line needs to follow raised detail or subtle contours instead of only flat areas. The tape is made for modeling use and suits both painted and unpainted scale models, including radio control models. Its material resists paint absorption, so color stays on the surface rather than soaking through the tape edge. After painting, the tape can be lifted away without leaving unsightly marks, keeping the finish cleaner around the masked area. On the bench, this refill works for separating body colors, protecting adjacent sections during touch-ups, or defining narrow painted accents with a steady 10 mm strip. The 18 m roll also gives enough length for repeated use across several projects, whether the task is a single body shell or a series of smaller detail sections.
Model-making masking tapes
3mm Masking Tape, model masking tape, 18 m
300087208€5.791 m = €0.32
This 3 mm masking tape is made for model finishing where narrow coverage and clean paint separation matter. The thin tape format follows fine contours and small sections more easily than wider strips, making it useful around trim lines, body details and other tight masking zones on scale plastic and radio control models. The adhesive layer is designed to hold firmly, even on uneven surfaces, so the tape can be pressed down across shaped parts and raised details before paint is applied. Because the tape does not absorb paint color, it supports crisp edges and helps keep the masked line clear when different colours meet. It can be used on painted or unpainted surfaces, which makes it suitable for both fresh builds and later detailing work. With a roll length of 18 m, the tape suits repeated workshop use across body shells, small components and staged paint jobs that need several masking passes. The 3 mm width is part of a wider size range that also includes 1 mm and 2 mm versions, allowing narrow line work to stay consistent when a finer masking width is needed.
Model-making masking tapes
Masking Tape 10mm, modelling tape with dispenser
300087031€6.691 m = €0.37
This modelling tape combines a thin tape body with strong adhesion, giving masking work a controlled feel on painted parts, bare surfaces and shaped model sections. The 10 mm width suits trim lines, panel areas and repeated strip placement, while the 18 m roll provides enough length for extended painting sessions at the bench. Its adhesive layer is described for uneven surfaces, which matters when tape has to follow contours, edges or small changes in level on scale plastic and radio control models. The thin construction helps the tape sit close to the surface during spraying or brush painting, supporting clean paint breaks instead of soft, wandering edges. A dispenser is part of the format, keeping the roll together between sessions and making it easier to pull and cut manageable lengths during detail work. The tape is intended for moments when colour separation has to stay precise, whether masking a body shell, protecting adjacent painted sections or defining narrow bands before the next coat goes on. It also suits unpainted parts that need temporary coverage during preparation and finishing. On the workbench, the combination of controlled width, long roll length and clean removal supports steady progress across single details and larger multi-step paint jobs.
Model-making masking tapes
Masking Tape Refill 18 mm, model tape roll
300087035€5.191 m = €0.29
This masking tape refill is built for model making where clean edges and dependable adhesion matter. With a 18 mm width and 18 m length, the roll covers broad sections, long stripes and repeated masking tasks on scale builds while keeping the working area neat and easy to define. The thin tape construction helps it sit close to the surface, which is especially useful on contours, panel transitions and other uneven areas that can challenge ordinary tape. Its strong adhesive grip is intended for modelling use and holds firmly during painting, while the material is designed not to absorb paint colour. That combination supports clearer colour separation and a tidier finish on painted parts. The tape can also be used on unpainted scale plastic or radio control models when precise coverage is needed before the next step in finishing. As a refill roll, it suits regular bench use where masking lines, borders and protected sections need to be laid down quickly and removed cleanly after spraying or brush work. On body shells, aircraft parts, car panels or detail sections, the 18 mm format gives enough coverage for wider areas while still allowing accurate placement by hand.
Model-making masking tapes
Masking Tape 6mm, modeling tape with dispenser
300087030€6.091 m = €0.34
This 6 mm masking tape is made for modeling work that depends on crisp paint boundaries and controlled placement. The thin tape conforms neatly as it is applied, which helps when following narrow trim lines, small edge sections and detailed body contours on scale plastic and radio control models. Its strong adhesive holds reliably even on uneven surfaces, so masking stays where it is placed while paint is applied around raised details and shaped sections. The 18 m length gives the roll useful reach for repeated paint sessions, from small corrections to larger multi-step masking jobs. The integrated dispenser keeps the roll contained and ready to pull, making it easier to handle short lengths for precise placement at the bench. The housing also helps keep the tape clean between sessions. The tape is suited to both painted and unpainted model surfaces where clear separation lines are needed. Because it does not absorb paint color and does not leave unsightly marks, it supports tidy results on body shells, trim areas and other detailed sections that benefit from careful masking before spraying or brush painting.
Model-making masking tapes
Masking Tape 18mm, model supply, with dispenser
300087032€8.791 m = €0.49
This 18 mm masking tape brings precise paint control to model finishing, with a thin tape body that follows surfaces closely and a 18 m roll length that supports longer masking passes across shells, panels and other broad sections. The included dispenser keeps the roll compact and ready at the bench, so the tape can be pulled, positioned and cut with steady handling during painting work. Its strong adhesive is designed for modeling use and adheres well even on uneven surfaces, which helps when masking around molded contours, panel transitions or raised details. The tape is intended for sharp and crisp lines, making it useful wherever two paint areas need a clearly defined boundary. Because the material does not absorb paint color, it helps maintain a cleaner edge during spraying or brush application. It is also suited to painted and unpainted scale plastic models as well as radio control models, giving the same roll a clear place in both finishing and repaint work. On a workbench, the 18 mm width suits larger coverage zones such as body sections, roof areas or side panels where narrow tape would take longer to place. It also works as a quick masking layer before adding narrower strips for tighter curves or smaller graphic details. For touch-ups, full repaint jobs or separating color blocks on RC bodies, the roll supports controlled, repeatable masking with less cleanup after removal.
Model-making masking tapes
Modeling Wax with Applicator for Scale Models
300087036€16.791 l = €559.67
Modeling Wax with Applicator adds a finishing step to painted scale models, combining polishing wax and a dedicated cloth in one set for controlled surface care at the workbench. The wax is intended for model building use and suits smooth exterior areas where a clean, even sheen helps completed bodywork look more refined under light. The bottle contains 40 ml and uses a pointed cap that supports measured dispensing onto the cloth instead of flooding the surface. According to the provided safety data, the wax is a liquid O/W emulsion with additives, with a pale blue to green colour and a pH value of 7 at 25 °C. That composition makes it a specialised finishing supply rather than a paint or adhesive, giving model builders a separate step for polishing cured surfaces. The included applicator cloth is shown folded for hand use, allowing the wax to be spread, worked in and buffed with direct control across panels, cowls or other finished sections. On a completed car body, aircraft fuselage or other painted shell, the wax can be applied after the main finishing stages to refine the look of the surface before display. It also fits routine bench use when a finished build needs a fresh polish after handling, transport or time in a display cabinet. Warning! Not suitable for children under 14 years.
Model-making masking tapes
150mm Masking Tape w/Sheet, masking film roll
300087203€11.291 m = €1.13
This masking tape with attached polyethylene sheeting combines edge definition and surface cover in a single 150 mm format, making paint preparation faster and more controlled around model parts and nearby sections. The clear film unrolls from the tape edge in one motion, so larger areas can be covered without building up multiple separate layers by hand. The roll measures 10 m in length, which supports repeated use across priming, colour coats and detail work. Polyethylene sheeting is resistant to paint, helping reduce the chance of seep-through while the taped edge marks a clean boundary for the area being worked on. The sheeting is made as a double layer, and the layers can be cut apart when a wider piece is required for broader coverage. This gives the roll added flexibility for narrow sections, larger panels and changing masking layouts during a project. On a model bench, the roll suits jobs where overspray needs to be kept off surrounding surfaces while a defined edge stays in place. It can be used to cover adjacent body sections, protect nearby parts during airbrushing, or prepare larger areas before multi-stage paint application.
Model-making masking tapes
40mm Masking Tape, model paint masking roll
300087063available in stores
This 40 mm masking tape is made for model painting where broad coverage and a clean edge matter at the same time. The thin tape lays down closely across the surface, making it useful for separating colour areas on scale plastic builds and radio control bodies while keeping the masking line controlled and consistent. Its adhesive holds well even on uneven surfaces, which helps when working around shaped panels, curved sections or raised details that can challenge wider tape. The 40 mm format suits larger sections that would otherwise need several narrower strips, and the 18 m roll gives enough length for repeated workshop use. The tape can also be cut into narrower sections when a layout calls for smaller masked areas inside a wider paint scheme. Because the material does not absorb paint colour or leave marks, it supports a tidier result on both painted and unpainted model surfaces. It fits naturally into airbrush sessions, spray can work and detail painting where a sharp division between colours is needed across fuselages, bodyshells, panels or other model parts.