Other accessories
Discover our versatile range of other modelling accessories! Here you'll find everything you need to fine-tune your projects: from special tools to practical aids. Perfect for taking your modelling experience to the next level!
Other accessories
Anaerobic Gel Thread Lock, model adhesive, red 1g
300054032€8.29
Anaerobic Gel Thread Lock is a model adhesive designed to help keep threaded metal parts from working loose during R/C use. The red gel format supports controlled placement on screw threads, so the compound stays where it is needed on small fasteners in vehicles, chassis sections and engine-related assemblies. The 1 g container is sized for precise hobby maintenance rather than broad surface bonding. Its anaerobic formula is intended for threaded connections, where it works within the joint instead of acting like a general-purpose glue across exposed surfaces. That makes it useful for screws and other metal fittings that face repeated vibration, regular handling and ongoing setup changes. The compact jar format also keeps the compound close at hand on a workbench for quick application during servicing. In practical use, a small amount can be placed on the thread before fastening a metal part into position on an R/C chassis or engine assembly. It suits routine maintenance sessions, rebuilds after running, and fresh installations where a more secure threaded hold is needed on metal hardware.
Other accessories
Anti-Slip Sticker, model supply, 75 x 150 mm
300087227€4.19
This anti-slip sticker sheet adds controlled grip exactly where small parts, tools and work surfaces tend to shift. The 75 x 150 mm size gives enough area for display bases, rulers, mats or custom cut sections, while the synthetic rubber face creates traction and the acrylic adhesive underside holds the sheet securely after placement. At about 0.4 mm thick excluding the backing film, the material stays slim enough for close contact on precision tools and flat working areas. The polyester cloth base supports the sheet structure while keeping it flexible enough to adapt to different applications. On metal rulers and cutting mats, the added grip helps keep the contact area steadier during cutting work. Applied to tweezer tips, the surface helps hold small parts more securely. Two sheets can also be combined to create a double-sided anti-slip layer for custom workshop setups. The sheet also suits bench and display use where movement needs to be reduced without adding bulky pads. It can be placed under finishing abrasives so the abrasive stays put while a part is moved back and forth across the surface, supporting cleaner, more controlled filing and sanding work. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab round extra small, hobby applicators
300087103€5.69
These round extra small cotton swabs are made for scale model work where control matters more than bulk coverage. Tightly spun cotton tips keep a cleaner shape during painting, decal application and panel lining, so small corrections and fine placement feel more deliberate at the workbench. Each swab uses an extra small head with an 8.5 mm tip length and a 2.2 mm diameter, which helps reach confined sections and narrow surface details without flooding the surrounding area. The industrial strength build is designed for hobby use rather than general household tasks, so the cotton resists fraying more effectively when wet or dipped in solvents. That makes them useful for subtle weathering, careful cleanup around markings and controlled application of finishing media on compact parts. The round tip shape also suits gentle blending and small circular motions where a pointed edge is not required. A pack of 50 supports repeated use across long build sessions, whether the task is settling decals onto body panels, refining panel lines or adding weathering to small areas such as Waterline series models. They also work well with Weathering Master Set colours when rust stains and other surface effects need a measured, local application. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab round small, hobby applicator, 50 pcs
300087104€5.69
This pack of 50 small round cotton swabs is made for scale model work where clean application and control matter. The tightly spun cotton tips keep their form more reliably than common supermarket swabs, which helps when placing decals, refining panel lines or working paint into small sections. With a 3 mm tip width and a 12 mm tip length, the swab reaches confined areas while keeping contact focused. The industrial strength design is intended for hobby use, including work with wet media and solvents. Because the cotton frays less easily, the swab leaves less loose fibre behind during detail work and reduces wasted material. The round tip shape suits dabbing, blending and controlled transfer on model surfaces, especially where a brush may carry too much material at once. It also supports weathering effects in small zones, such as rust staining and subtle surface variation. On ship subjects, aircraft details or other compact assemblies, the slim double-ended format helps move from one section to the next without changing tools immediately. The swabs can also be used with Weathering Master Set colours when building up fine effects on corners, seams and other narrow points of the model. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab round, hobby applicator, 50 pieces
300087141€6.59
These round craft cotton swabs are made for scale model work where control at the tip matters. Each swab uses tightly spun cotton that keeps its shape more reliably during painting, decal application and surface detailing than loosely wound household alternatives. The pack contains 50 swabs, giving a practical bench supply for repeated finishing sessions. The round tip measures 12.5 mm in length and 3.5 mm in width, a format suited to broader contact on small model sections while still staying manageable around edges and recessed detail. When the tip is wet or dipped in solvents, the industrial strength construction helps it resist fraying, so the cotton stays more consistent during cleanup, blending and correction work. This makes the swabs useful not only for placing decals and working panel lines, but also for refining weathering effects and applying color from weathering sets to focused areas. On the workbench, the swabs fit naturally into the finishing stages of a build: smoothing decal edges, adjusting panel line application, lifting excess material or adding subtle rust and dirt effects. The round head shape also suits repeated passes over compact surfaces where a pointed tip would cover less area with each stroke. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab Tria.extra small, hobby applicators
300087105€6.69
These extra small Tria. cotton swabs are made for model finishing where a standard household swab can feel too soft or lose its form too quickly. The tightly spun triangular cotton tips create a more defined contact area for careful work on decals, panel lining and other small surface details, especially where edges and corners need a narrower touch. Each pack contains 50 swabs, and the double-ended format puts a working tip on both sides for repeated use across painting and weathering steps. The tip section measures 8 mm, with a slim 2.3 mm profile that suits compact parts and fine surface sections. Compared with loosely spun supermarket swabs, these industrial strength swabs are designed to fray less easily when wet or dipped in solvents, which helps keep the cotton shape more consistent during detailed bench work. They fit naturally into scale model routines, from pressing decals into recessed lines to applying weathering colors in small zones. On compact subjects such as Waterline series models, the triangular tip shape helps target tight areas where broader applicators can leave excess color or disturb nearby detail. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab Tria.medium 50-Piece Cleaning Set
300087107€5.69
The Cotton Swab Tria.medium pack brings a precise, workshop-ready format to detailed cleaning and careful surface work. With 50 swabs in the pack and a double-ended layout, each piece offers two usable cotton tips on a slim white stem, making it easy to keep work moving during maintenance, touch-up preparation or dust removal around small parts. Each cotton head measures 10.5 mm in length and 4.5 mm in width, giving this Tria.medium format a balanced size for controlled contact on narrow sections, edges and recessed areas. The cotton surface supports gentle handling on finished components where a firmer tool would be less suitable. The medium tip size also suits jobs that need more coverage than a very fine point while still staying focused on small zones rather than broad wiping. On a hobby bench, these swabs fit naturally into routine care for models, tools and display pieces. They can be kept close at hand for cleaning sessions, detail work between build stages or careful upkeep of visible surfaces where neat, measured application matters. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab Tria.small, hobby tool, 50 pieces
300087106€5.69
The Cotton Swab Tria.small is a compact hobby tool for precise cleanup and controlled application work. Each swab uses a narrow cotton tip measuring 10.5 mm in length and 3 mm in width, a format that helps reach confined sections where a broader tip would cover too much area. The slim white stick carries cotton on both ends, giving 2 working tips per swab and 100 usable ends across the 50-piece pack. This layout supports short, exact motions when handling small amounts of material, lifting residue from edges or working around recessed details. The tria.small designation points to a compact tip profile, making the swabs especially suited to fine-scale maintenance and finishing tasks where contact needs to stay localized. On a workbench, the narrow tip can be used for careful touch-up preparation, gentle surface cleaning or controlled work around corners and small openings. In model building and finishing routines, the 50-count pack provides a practical supply for repeated detail sessions without taking much space in the tool area. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab Triangular 50pc Hobby Applicators
300087142€6.59
These triangular cotton swabs are made for model work where a standard household swab quickly loses its edge. The tightly spun cotton tips keep their form during painting, decal application and panel lining, giving steadier contact on small surfaces and more control around raised details. The pointed profile helps guide pigment, lining fluid or decal pressure into corners and along narrow sections that are awkward with a rounded tip. Industrial strength construction means the cotton is less likely to fray when wet or when dipped in solvents, so the working edge stays cleaner through repeated passes. The pack contains 50 swabs, ready for regular bench use across touch-ups, weathering and cleanup steps. Tip dimensions shown in the product data are 10.5 mm in length, with widths of 3.4 mm and 2.3 mm for the two illustrated pointed profiles. On a painted bodyshell, the swabs can press decals down over panel lines and contours with a lighter, more exact touch. During weathering, they help place rust stains, blend effects in confined spots and carry Weathering Master Set colours onto selected areas without flooding the surrounding surface. Warning! Not suitable for children under 14 years.
Other accessories
Display Case C, model display case, 1:20 and 1:24
300073008€21.99
Display Case C gives finished scale models a clean, defined setting with clear walls and a mirrored base insert that brings underside detail into view. Sized for 1:20 racing cars and 1:24 sports cars, it turns a completed build into a focused display piece rather than leaving it exposed on an open shelf. The case has inner dimensions of 247 x 133 x 92 mm, giving compact vehicle models a measured fit that suits low, wide body shapes often seen in racing and sports car subjects. Outer dimensions of 260 x 144 x 105 mm keep the overall footprint manageable for cabinets, desks or hobby rooms. The mirror sheet applied to the base adds a second viewing angle, so chassis parts, floor shaping and lower body contours remain visible without lifting the model. Placed in a collection cabinet, on a workbench or in a study, the case helps present a finished model with a more deliberate layout. It also suits display after painting, decaling and final assembly, when surface finish and stance deserve a clear, unobstructed view.
Other accessories
Display Case P, display case for 1:20 and 1:700
300073020€25.99
Display Case P gives finished scale builds a defined presentation with a clear acrylic cover and a black molded base. Sized for selected 1:20 car models and 1:700 Water Line Series subjects, it turns a completed build into a clean display piece while keeping the shape and finish fully visible. The acrylic upper section offers high transparency, so body lines, paintwork, deck structures and small markings remain easy to see through the cover. Inner dimensions of 287 x 132 x 93 mm provide the enclosed display space, while the outer dimensions of 299 x 145 x 106 mm help when planning shelf or cabinet placement. The product data also lists dimensions of 260 x 144 x 105 mm, but this measurement conflicts with the stated inner and outer sizes and is therefore not used here. On a desk, in a hobby room or inside a display cabinet, the case gives a finished model a clear boundary and a tidier presentation. It suits builders who want to keep a completed car or Water Line subject together in one covered space while leaving the details visible from the outside.
Other accessories
HG II Rounded Flat Brush, medium paintbrush
300087230€9.99
The HG II Rounded Flat Brush Medium PBT is a dedicated hobby paintbrush built for controlled coverage and clean handling during model painting. Its rounded flat brush shape combines the broader contact of a flat profile with a softer edge, helping paint settle across surfaces with more control than a sharply squared tip. PBT bristles give the brush its working character, supporting steady paint pickup and a consistent stroke across repeated passes. The medium size suits a wide range of bench tasks, from laying down base colour on larger sections to guiding paint along edges, raised details and shaped panels. Within the HG II tool range, this brush is positioned as a practical choice for careful finishing work where brush shape and bristle response matter as much as colour choice. The format also fits hobby routines that move between coverage and refinement without changing tools for every step. At the workbench, the brush suits model parts, figures and other detailed painted surfaces that call for measured, even application. It works well in sessions that alternate between broader areas and tighter sections, keeping the painting process focused and precise. Warning! Not suitable for children under 14 years.
Other accessories
Masking Fluid 20g, model supply, precision bottle
300087229€7.89
Masking Fluid 20g adds a controlled way to cover small sections before paint is applied, especially on uneven or curved surfaces where straight masking tape can be awkward to place. The bottle uses a soft body and a pointed dispensing nozzle, making it easier to guide the fluid onto shaped details, edges and narrow areas with a steady hand. The 20 g format gives a practical amount for repeated use on model painting tasks without taking much space on the workbench. The liquid form suits sections that need a flexible masking layer rather than a cut strip, and the nozzle layout helps place the material exactly where coverage is needed. This makes it useful for painted borders, small clear parts, trim lines and other detailed zones that benefit from careful separation during finishing work. On aircraft, cars, figures or other scale subjects, the bottle can be kept close at hand for touch-up masking and detail preparation between paint stages. It fits naturally into hobby bench routines where shaped surfaces, fine contours and controlled application matter as much as the colour coat itself. Warning! Not suitable for children under 14 years.
Other accessories
Non-Scratch Grips LNP II, model accessory, 2set
300074167€3.19
Non-Scratch Grips LNP II is a model accessory set built around a clear functional detail: a non-scratch contact surface paired in a 2set format. That combination supports handling, replacement and setup tasks where grip is needed but finished parts should stay free from unwanted marks. The LNP II designation identifies this specific version rather than a generic grip, which matters when matching accessories to an existing model setup. With 2 matching pieces in the pack, the set suits applications that need a left and right pair or a direct spare kept ready for later maintenance. The accessory format also makes it easy to store alongside other workshop supplies for regular adjustment sessions. No battery-powered function is involved in the set itself, so the focus stays on the contact surface and the paired quantity. On a model bench, these grips fit naturally into routine replacement work, setup changes or careful handling of finished assemblies. They also suit parts boxes kept for ongoing maintenance, where an exact named version and a matched pair save time during future repairs or refresh work. Warning! Not suitable for children under 14 years.
Other accessories
Plastic Beam 3x3mm SquareTube, model supplies
300070261€7.49
Plastic Beam 3x3mm SquareTube brings clean geometry to scratch-building and model modification, with a square 3 x 3 mm profile that supports straight runs, measured cuts and neatly aligned joins. The 5-piece pack gives builders matching stock for repeated structural work, detail fabrication or replacement sections where consistent dimensions matter. The square tube format is useful wherever a build needs crisp edges and a stable profile rather than a rounded rod. It can be cut to length, combined into frames, used as internal bracing or adapted for custom details on scale models and workshop projects. Because each beam shares the same section, layouts stay uniform across multiple contact points and parallel structures. The compact profile also suits confined spaces where larger stock would crowd surrounding parts. On a bench, these beams fit naturally into measured fabrication work, from reinforcing a body support to creating small structural inserts and straight-edged custom features. They also serve well in repair jobs where a damaged section needs replacement with matching square stock. Since batteries are not included, no battery-related function applies to this model supply.
Other accessories
Plastic Beam 5x5mm SquareTube, model supply
300070262€7.49
Plastic Beam 5x5mm SquareTube brings a clean square profile to model building, with 5 x 5 mm dimensions that suit structural additions, fabricated frames and custom detailing. The pack contains 4 matching beams, giving consistent stock for repeated cuts and balanced left-right sections in scratch-built work. The square tube format offers straight edges and an even cross section that help when planning measured joins, supports and boxed shapes. In contrast to narrower strip material, this profile can define corners and framed sections with more visual presence. The identical beam size across all 4 pieces supports tidy geometry when a build calls for parallel members, repeated lengths or matching braces. The compact format also makes the material easy to combine with other model supplies in conversions, diorama structures or workshop modifications. On the bench, these beams suit careful trimming, test fitting and placement in areas where a hollow square section gives the right look or structure. They work well for custom projects that need clean lines, repeatable dimensions and a straightforward base for fabricated details in scale scenes or model assemblies.
Other accessories
Plastic Beam 8x8mm SquareTube, model supply
300070263€7.49
This set of Plastic Beam SquareTube parts brings a clean 8 x 8 mm profile to scratch-building, structural detailing and custom model work. With 3 matching beams in the pack, it supports measured cuts, repeated sections and tidy alignment across frames, supports or fabricated add-ons where a square cross section is needed. The tube format opens up more than one use within a build. It can serve as a visible framework element, a hidden spacer, or a base for adapting other parts around a consistent shape. The plastic material is easy to integrate into many modelmaking workflows where straight edges, even dimensions and repeatable lengths matter. The 8 x 8 mm section also gives a clear reference when planning fit around body panels, scenery elements or workshop-style structures. On the bench, these beams suit custom projects, repairs and one-off conversions that call for simple geometry and clean lines. They also work well as stock material for keeping matching sections ready for later adjustments, replacement pieces or parallel fabrication tasks within the same modelmaking setup. Warning! Not suitable for children under 14 years.
Other accessories
Ultra Thin Aluminum Sticker, foil sheets, 0.01 mm
300087226€9.99
Ultra Thin Aluminum Sticker brings real metal surface material into model finishing with 2 foil sheets at 0.01 mm thickness. The format suits builders who need a very fine layer for selected panels, trim sections or localized detailing where molded lines and body contours should remain visible. The metallic surface gives scale projects a crisp, technical look that works especially well on aircraft skins, car body accents and other hard-surface subjects. Each sheet can be cut to shape for the exact section being covered, which supports careful work around openings, edges and narrow framed areas. The thin foil format is useful when a painted effect is not the goal and an actual metal layer is preferred for visual contrast. On curved bodywork or tapered sections, the material can be adapted more closely than thicker sheet stock, making it suitable for detail-focused finishing rather than broad structural covering. The 2-sheet pack also leaves room to test placement on smaller sections before committing to a larger area. In a workshop setup, the sheets fit naturally into body detailing, aircraft panel work and custom trim application. They can be used during a fresh build or added later to refine a completed model with extra surface variation and sharper metallic definition. Warning! Not suitable for children under 14 years.
Other accessories
Epoxy Putty Smooth Surface, 2-part modeling putty
300087145€23.991 kg = €239.90
Epoxy Putty Smooth Surface is a 2-part modeling putty made for shaping, filling and refining model work with a cleaner finish. The 100 g pack combines 2 separately wrapped components, with 35 g in one part and 65 g in the other, ready to be kneaded together when fabrication or repair work begins. The Smooth Surface formulation suits projects where the final contour matters as much as the build itself. It can be used for RC-modeling detail fabrication, sculpting, kit modifications and repairs, giving model makers a material that can bridge gaps, build up forms or refine custom sections. The 2-compound format helps control when the curing process starts, because the components stay separate until mixing. That makes it practical for staged work on body alterations, added details or scratch-built shapes that need careful placement before finishing. The larger 100 g quantity also supports broader jobs that go beyond small touch-ups. On the bench, the putty fits naturally into custom model workflows, whether the task is reshaping a panel line area, building a new contour, or correcting a damaged section before sanding and paint. It also suits full-scratch fabrication where a smooth outer surface helps define the final form with less follow-up correction. Warning! Not suitable for children under 14 years.
Other accessories
Plastic Beams 1mm Round (10), model supplies
300070174€6.49
Plastic Beams 1mm Round (10) brings a clean, uniform rod format to model building, with 10 round beams at 1 mm diameter ready for precise custom work on miniature projects. The narrow profile suits fine additions where a consistent circular section matters, whether shaping small supports, adding linear detail or preparing replacement parts for a careful rebuild. Each beam can be cut to length and adapted to the layout of the build, giving model makers raw material for scratch-built sections that need repeatable dimensions across several matching pieces. The round cross-section lends itself to pins, rods, braces and other slim structural elements where flat strip or sheet stock would not match the intended form. With 10 pieces in the pack, there is enough stock to plan test pieces, mirrored parts or several small assemblies within the same project. On the workbench, these beams fit naturally into detail-focused tasks such as refining body features, adding framework touches or replacing missing small parts with a closer visual match. The 1 mm size also supports careful integration into compact spaces where larger rod stock would overpower the scale of the build.
Other accessories
2mm Round Plastic Beams, model building rods
300070132€4.59
These 2 mm round plastic beams add a straightforward building material to model work that calls for clean lines, repeatable dimensions and small-scale fabrication. The round profile suits custom supports, braces and shaped details, while the white material makes marking and trimming easy to follow at the bench. With 10 beams in the pack, there is enough matching stock for test pieces, mirrored parts or several stages of the same build. The slim diameter works where flat sheet or thicker stock would be too bulky, and the uniform round section helps keep scratch-built elements visually consistent across a chassis detail, body modification or workshop-made accessory. The beams can be cut to length, combined with other hobby materials and adapted to many kinds of model construction where a narrow rod is the right starting point. They fit naturally into spare-parts drawers, tool caddies and ongoing project boxes, ready for quick use when a build needs a brace, pin, spacer-style detail or a simple custom addition. On the workbench, the pack serves as practical raw material for measured fabrication rather than a single one-use component.
Other accessories
2mm Square Beams, Model Building Material Set
300070129€4.59
This set of 2 mm square beams gives model builders a clean, uniform building stock for scratch construction, structural detailing and custom modifications. The straight profile helps when creating framed sections, narrow supports or crisp edges, whether the workbench holds a scale structure, a diorama element or a one-off conversion. The pack contains 10 beams, providing matching lengths for repeated sections and measured layouts. The white finish makes cut lines and fit checks easy to read during planning and assembly. In small-scale work, a square section like this can be used where flat strip would not give the same defined corner or boxed-in look. The consistent 2 mm format also helps when combining several pieces into grids, braces or layered framework. On a hobby bench, these beams suit jobs such as reinforcing openings, building internal frames, outlining panels or adding architectural detail to scenery pieces. They can be trimmed to length and arranged to match the exact geometry of the build, making them a practical material choice for careful, parts-led model construction.
Other accessories
1 mm Square Masking Stickers, model masking strips
300070173€6.49
These 1 mm Square Masking Stickers bring fine control to paintwork where broad masking tape is too wide. The narrow pre-cut format helps define straight separations, slim borders and geometric accents on detailed hobby surfaces, keeping the focus on clean lines and careful finishing. The pack contains 10 masking strips, giving room for repeated layouts or multi-stage colour work across several sections. Their square profile suits edges, corners and panel-style divisions that call for a consistent width from start to finish. On plastic models, RC bodyshell details, miniatures or other painted parts, the thin format helps isolate narrow areas that would be difficult to cut evenly by hand. This makes them useful for stripe work, framed sections and precise paint boundaries where symmetry matters. On the workbench, the strips fit naturally into detail painting sessions that involve layered colours, touch-ups or sharply defined trim lines. They also support careful planning before spraying or brush painting, especially when a build calls for repeated narrow markings across multiple surfaces.
Other accessories
3 mm Round Beams, modeling rods, pack of 10
300070133€6.49
These 3 mm round beams bring clean, uniform rod stock to scratch building, detailing and structural model work. The pack contains 10 matching rods, giving builders a ready supply for repeated cuts, shaped inserts and custom additions where a consistent round section matters across the whole build. The white beam material suits a wide range of workshop tasks, from internal bracing and spacers to visible framework and fine surface additions. The 3 mm diameter is substantial enough for structural accents yet still manageable for careful trimming, fitting and placement on scale scenes or custom assemblies. Straight rod stock also helps when a project needs repeated lengths with the same profile, keeping fabricated parts visually consistent. In mixed-material builds, round beams can support mock mechanical parts, railings, supports or stand-off elements without forcing a change in section shape. On the bench, these rods fit naturally into custom model projects, diorama structures and one-off modifications that call for measured, repeatable material. They also suit hobby work where standard beam stock is easier to adapt than searching for a preformed part in the exact size needed.
Other accessories
5 mm Square Beams, model building strips
300070131€6.99
These 5 mm square beams give scratch-built models and custom scenes a crisp, regular profile that is easy to plan around on the workbench. The white styrene material suits measured cutting, shaping and joining, whether the goal is a simple frame, a structural brace or a clean-edged detail added to a larger build. The square section helps keep corners consistent when building supports, borders or fabricated components that need a uniform look across repeated parts. With 2 matching beams in the pack, the same profile can be carried through paired rails, parallel members or mirrored details without changing stock midway through the job. The long strip format also leaves flexibility for either full-length applications or several shorter sections, depending on the layout of the model. In architectural scenes, workshop builds or vehicle conversions, the material can be adapted to visible trim as well as hidden reinforcement. On a hobby bench, these beams fit naturally into scratch-building tasks where raw material matters as much as the finished shape. They suit diorama structures, custom body details, internal framing and other model-making work that starts with accurate stock and careful hand finishing.
Other accessories
Pla-Plate 0.3mm B4 Size, model sheet pack
300070122€10.49
Pla-Plate 0.3mm B4 Size is a thin sheet material for model making that brings clean, uniform stock to scratch building, custom detailing and structural additions. The 0.3 mm profile suits work where a lighter layer, a surface skin or a finely trimmed insert needs to sit neatly against surrounding parts, while the B4 format opens up room for larger templates and repeated shapes. The pack contains 5 white sheets, giving a steady supply for multi-stage fabrication or for keeping matching material across one project. Flat sheet stock like this supports measured marking, straight cuts and controlled shaping for panels, covers, liners and other custom-made sections. In model workshops, a thin plate can be used to create overlays, refine contours or add new surfaces where molded parts do not provide the required form. The white finish also makes pencil lines, cut marks and layout planning easier to read during preparation. On the bench, the larger B4 size helps when drafting several parts from one sheet or when testing a full pattern before trimming it down. It fits naturally into scratch-built projects, conversions and repair work where consistent thickness matters across every added section.
Other accessories
Pla-Plate 0.5mm B4 Size, styrene sheet pack
300070123€11.49
Pla-Plate 0.5mm B4 Size is a styrene sheet set for model making and custom fabrication, combining a thin 0.5 mm profile with a large B4 format that suits clean, measured work on flat parts and added detail. The white sheets present a plain surface that can be marked out clearly before cutting, helping planned shapes stand out during layout and trimming. With 4 sheets in the pack, the set supports repeated parts, spare sections and larger scratch-built elements without mixing formats. The thin stock is suited to overlays, panels, facings and other shaped components where a full block material would be too heavy or too thick. In workshop use, the broad sheet area leaves room to arrange several templates on one board, while the consistent thickness helps matching parts sit evenly across a build. The flat form also makes it practical for testing fit before committing to a final shaped section. On scale models, dioramas and custom hobby projects, the sheets can be cut into body panels, interior sections, structural inserts or visual detailing where plain stock is needed. The format also suits craft benches that need a uniform material for prototyping, pattern work or small-batch part making across several stages of a project.
Other accessories
Pla-Plate 1.0mm B4 Size, styrene sheet set
300070124€11.29
Pla-Plate 1.0mm B4 Size is a sheet material for model making, scratch-building and custom fabrication, giving builders a clean white styrene surface that can be marked, cut and shaped for tailored parts. The 1.0 mm thickness adds substance for structural sections and larger panels, while the B4 format leaves room to plan several pieces on one sheet before trimming. This pack contains 2 matching sheets, which helps when a build needs mirrored parts, repeat sections or spare material for test fitting. The plain sheet format suits body modifications, interior panels, scenery elements and workshop-made details where standard kit parts do not cover the required shape. White styrene also makes pencil lines, templates and edge work easy to see during measuring and cutting. Because the material arrives as flat stock, it can be adapted to many model-making tasks that depend on exact dimensions rather than pre-formed shapes. On the bench, the larger B4 area supports careful layout work before the first cut, whether the goal is a single broad panel or several smaller components from one sheet. In diorama and conversion projects, the 2-sheet pack keeps the same thickness available across connected sections and follow-up adjustments.
Other accessories
Plastic Beams 3mm H, model supplies, white
300070201€7.29
Plastic Beams 3mm H is a white model supplies set built around a simple, exact format: 5 matching beams with a 3 mm H profile. That defined section makes the pack useful wherever a build calls for repeatable structural pieces, whether for replacement work, extensions or custom fabrication. The straight beam shape supports clean alignment across adjoining sections, and the white colour keeps visible additions consistent with lighter layouts and finishes. Because all 5 pieces share the same profile, the pack suits measured planning where several supports, rails or spacers need to match one another closely. The format also lends itself to cut-to-length work in scratch-building and conversions, where a uniform section is more useful than mixed offcuts. As model supplies, these beams fit naturally into workshop stock for ongoing projects that need spare structural material on hand. On the bench, the set works well for refining a single build or keeping matching material ready for later repairs. The compact pack of 5 beams also suits hobby drawers and parts organisers, where clearly defined white sections are easy to sort and retrieve for the next modelling task.
Other accessories
1:14 Highroof 56375, model parts, cab section
319115579€28.99
Highroof 56375 brings a 1:14 cab section into truck model work with unpainted molded parts that show the main front body shape, a rectangular window opening and defined exterior panel lines. The sprue layout keeps the individual sections organised during preparation and helps separate the main shell from the smaller trim elements before fitting and finishing. The set centres on the upper cab area and front face rather than a complete vehicle, making it suited to replacement work, restoration projects or a custom body configuration built around a high-roof truck look. Separate curved front pieces add another construction stage at the nose of the cab, where alignment and surface preparation shape the final appearance. Molded attachment points support placement of the parts during assembly, while the plain white finish leaves the surfaces ready for primer, paint and detailing matched to the chosen model scheme. On the bench, the parts support measured trimming, dry fitting and paint planning before final installation on a compatible build. In a workshop setup focused on truck models, the 1:14 scale and cab-specific form make this set a practical basis for replacing worn body sections or developing a different front-end style. Warning! Not suitable for children under 14 years.
Other accessories
3 mm Round Beam, modelling material, clear rods
300070159€6.49
These clear round beams bring a precise 3 mm profile to model making, scratch-building and custom craft work. The transparent finish keeps the structure visible without adding colour, which suits frames, supports, guides and detail parts that need a clean technical look. The pack contains 5 beams, giving consistent material for repeated components or several separate modifications within one build. The soft material supports cutting and adapting to the required shape, which helps when a project calls for custom lengths or fitted internal structure. In small-scale scenes, transparent rod stock can be used where spacing, alignment or light transmission matters. The round section also suits mechanical mock-ups, educational constructions and hobby experiments that rely on a uniform diameter. On the workbench, these beams fit naturally into projects that move beyond standard kit parts. They can support one-off details, replacement sections or original structures built from raw material, whether the goal is a cleaner finish, a visible framework or a custom display element.
Other accessories
3mm Pipe Beams, model building tubes, white
300070219€8.39
These 3 mm pipe beams bring a clean, technical building element to model making, with a white finish and a hollow tube profile that suits structural additions, custom fabrication and replacement work. The 6 matching pieces give a consistent starting point for projects that need repeated lengths, aligned detailing or uniform tubing across a build. The cylindrical form makes these beams useful wherever a round section is needed instead of a flat strip, and the open ends support applications where the tube shape itself is part of the look or function. In scratch-built assemblies, they can serve as spacers, framework sections or visible technical accents. The white material also works well as a neutral base for further finishing, while the simple beam format keeps cutting, fitting and combining straightforward within a wider model workshop setup. On the bench, these tubes suit careful modification work, small repairs and custom detailing on scale scenes or vehicle projects. They also fit neatly into parts storage for repeat use when a build calls for matching round beams rather than mixed offcuts.
Other accessories
3mm Square Beams, plastic model supply, 10-pack
300070130€6.99
These 3 mm square beams provide a clean, consistent starting point for scratch-building, structural detailing and custom model work. The pack contains 10 white styrene strips, giving a ready supply of matching sections for measured cuts, repeated lengths and neat framed shapes on the workbench. The square profile makes these beams useful wherever straight edges and even corners matter. Styrene can be adapted for supports, braces, spacers and small fabricated sections, whether the task involves extending a structure, refining an interior layout or adding custom reinforcement. Because all 10 strips share the same 3 mm format, planning mirrored parts and keeping dimensions consistent becomes easier across a series of cuts. The white finish also helps pencil marks and cut lines stay visible during measuring and trimming. On a hobby bench, the beams fit naturally into projects that call for custom geometry rather than pre-formed parts. They can be prepared in short sections for compact details or kept longer for rails and frame runs, making them a practical material choice for ongoing model modification and scratch-built construction.
Other accessories
3mm U Plastic Beams, Model Building Supply, 5-Pack
300070202€7.29
These 3 mm U-shaped plastic beams bring clean geometry and repeatable structure to model building work that calls for narrow channel sections. The pack contains 5 matching white beams, making it easier to plan parallel runs, mirrored layouts or multiple support points within the same build. The U-profile gives each beam an open groove that can be used where parts need to sit in line, slide into position or follow a defined edge. That shape suits scratch-building tasks such as framing, guides, rails and custom supports, while the white finish provides a neutral base for visible sections or later painting. The slim format also helps when space is limited and a full solid strip would take up too much room. Used as trim, reinforcement or a construction connector, each beam adds a crisp, technical look to detailed assemblies. On workshop tables, diorama projects and custom model modifications, these beams support accurate, repeatable placement across small-scale structures. The 5-piece set also leaves room for test fitting, matched left and right sections or extending the same profile through several areas of a build.
Other accessories
5 mm Pipe, Plastic Beams accessory, white
300070220€8.39
These Plastic Beams 5 mm Pipe parts add a clean tubular element to custom model work, with a white finish and hollow form that suit structural accents, spacing tasks and lightweight scratch-built details. The set contains 5 matching pieces, making it useful where the same diameter needs to repeat across a build. The 5 mm format gives a clear reference point for planning fit and proportion in technical scenes, vehicle interiors or workshop-style assemblies. The open circular ends allow the tube shape to read clearly in exposed layouts, and the smooth surface supports neat trimming and placement. White colouring stands out well during measuring, test fitting and marking, which helps when several small components are being arranged at once. As a model supply rather than a finished display piece, these beam pipes can be cut, positioned or combined according to the needs of the build. On the bench, the set suits restocking a parts box, refining a conversion or adding simple pipework to a diorama section. It also works for replacing worn sections in an existing project where matching diameter and a tidy tubular profile matter.
Other accessories
5 mm Plastic Beams, model building accessory
300070200€7.29
These white plastic beams provide straightforward building stock for model making, custom fabrication and scratch-built details. The pack contains 5 pieces, giving matching material for repeated sections, parallel supports or small structural additions where a consistent profile matters on the bench. The 5 mm beam format supports measured cutting and planning when a build calls for clean lengths instead of improvised offcuts. Straight stock like this can be used to form internal bracing, visible framework, edging or custom add-ons in hand-built scenes and conversions. The white material also offers a neutral base for sanding, trimming and finishing to match the surrounding assembly. Because all 5 pieces share the same format, it is easier to prepare mirrored parts or repeated elements that need the same visual rhythm. On a worktable, these beams fit naturally into ongoing model projects, whether the task is replacing a missing section, extending a structure or adding fresh detail to a custom build. They also make practical workshop stock for keeping core shapes ready between larger fabrication steps.
Other accessories
5 mm Round Beams, model building rods, white
300070134€6.49
These 5 mm round beams bring clean geometry to model building, scratch construction and custom detailing. The white finish keeps layout lines visible during marking and trimming, while the uniform round profile supports repeatable sections for braces, spacers and shaped additions. Each pack provides 6 beams for builds that need matching diameters across several points, whether the task is extending a structure, adding internal supports or preparing duplicate parts. The rod format suits measured cutting, sanding and fitting, making it useful for workshop prototypes as well as fine visual detailing. In scale projects, round stock like this can be worked into frames, mounts or cylindrical features where a square strip would not match the intended form. On the bench, these beams fit naturally into careful planning and test fitting before final placement. They suit custom model work, conversions and one-off fabrication where consistent 5 mm material helps keep proportions even from one section to the next.
Other accessories
Foam Board 2mm B4, craft sheets, 4 pieces
300070197€14.69
This pack of foam board sheets brings a clean, practical base material to model making, layout work and craft builds. Each set contains 4 white sheets in B4 format, with a 2 mm thickness and a sheet size of 257 x 364 mm, giving a broad surface for measured cuts, layered shapes and lightweight panels on the workbench. The slim foam board structure suits tasks where a flat board is needed without the bulk of thicker stock. It can be marked out for templates, trimmed into custom forms, or used as a backing layer for presentation pieces and scenery sections. The plain white finish keeps the surface neutral for sketching, covering, painting or combining with printed references and other hobby materials. Straight-cut edges also make it easier to align repeated sections and keep corners tidy during layout work. On a model bench, the sheets can serve as a base for mock-ups, architectural studies, display backings or terrain elements that need a light core. In craft use, the B4 format gives enough area for larger shapes while still fitting neatly into organised storage and regular cutting spaces. Radio gear, a battery pack, a charger and paints are not required for use with this foam board. Warning! Not suitable for children under 14 years.
Other accessories
Foam Board 5 mm, craft board sheets, B4 size
300070139€12.49
This foam board set brings clean edges, low weight and useful thickness to model making and craft work. The pack contains 2 white sheets in B4 size, each measuring 364 x 257 mm, with a 5 mm profile that gives flat layouts more structure and presence. Whether used for backing panels, mock-up walls or simple display surfaces, the format is easy to integrate into bench projects where straight cuts and consistent sizing matter. The lightweight construction, listed at 60 g per sheet, keeps handling straightforward when sections need to be moved, checked or combined. The 5 mm depth supports layered builds, raised details and simple stand-up forms without relying on heavy board stock. The white surface also works well for drawn guide lines, trimmed shapes and clean visual contrast around painted parts, printed graphics or small scenic elements. In workshop use, the pair of matching sheets gives enough material for mirrored sections, test pieces or a main panel with spare stock kept aside. On a hobby table, the boards suit diorama bases, presentation backdrops and quick structural mock-ups. They also fit craft tasks that call for a light panel with a larger working area than small card pieces, while the B4 format remains easy to store between sessions.
Other accessories
Pla-Board 2mm B4, modeling sheet, 2 pcs
300070146€13.49
Pla-Board 2mm B4 is a white modeling sheet set for scratch building, fabrication and custom hobby work. Each pack contains 2 sheets, and each sheet measures 257 x 364 mm in B4 format, giving a large, consistent surface for planning parts, cutting shapes and building clean structural sections for models or craft projects. The 2 mm board thickness supports work that calls for more substance than a thin facing layer, such as internal supports, formed panels, dividers or custom-built housings. The white surface is easy to mark during layout work and keeps edges, cut lines and fitted shapes clearly visible while parts are being prepared. Across diorama construction, model modification and general hobby fabrication, the sheet format leaves room for larger patterns as well as several smaller components taken from one board. On the workbench, the pair of matching sheets helps keep material consistent across repeated parts or mirrored sections. The broad B4 size also suits template transfer, mock-up building and one-off custom pieces where standard kit parts do not cover the required shape or dimension.
Other accessories
Pla-Board 3mm B4, model building sheet, white
300070147€9.49
Pla-Board 3mm B4 is a white model-building sheet made for scratch construction, custom fabrication and clean structural work in hobby projects. The 3 mm thickness gives the board substance for parts that need more presence than thin sheet material, whether used for bases, spacers, panels or shaped inserts. The B4 size measures 257 x 364 mm, leaving enough surface for larger cut sections, repeated templates or several smaller components from one board. The flat format supports careful measuring before cutting, and the plain white surface keeps pencil marks, layout lines and edge checks easy to read during fabrication. Supplied as 1 board, it fits focused modification work where a single panel is the right starting point. On the bench, the sheet can be trimmed into straight strips, shaped into custom sections or used as a backing layer for diorama structures and model details. It also suits repair and conversion tasks that call for a clean, uniform board with consistent 3 mm thickness across the full panel.
Other accessories
Pla-Paper 0.2mm B4, model sheet, 3 white sheets
300070209€12.49
Pla-Paper 0.2 mm B4 is a thin sheet material for model making, scratch-building and custom detailing. The 0.2 mm profile supports light surface work where a full plastic block would be too heavy or too thick, while the B4 format of 257 x 364 mm leaves room for larger patterns, long trim sections and multiple smaller cutouts on the same sheet. The pack contains 3 white sheets, which helps when a build calls for mirrored parts, repeat pieces or a second attempt after a test fit. The white surface makes pencil marks, traced outlines and template lines easy to read during measuring and cutting. In workshop use, the material suits panel overlays, interior details, backing pieces and other flat components that need a clean, uniform look. The thin format also makes it practical for layering where extra surface definition is needed without adding much bulk. On the bench, one sheet can be kept for templates while the remaining 2 are reserved for final parts, helping maintain consistency across a conversion or repair. For hobby projects that rely on hand-cut shapes and careful fitting, this sheet stock adds a straightforward material option for precise custom work.
Other accessories
Pla-Plate 1.2mm B4 Size, plastic sheet
300070125€13.49
Pla-Plate 1.2mm B4 Size is a flat sheet material for model making, scratch building and custom hobby fabrication. The 1.2 mm thickness gives the sheet enough substance for structural layers, shaped inserts and clean-edged cut parts, while the B4 format leaves room for larger layouts, repeated templates and broad surface sections on a single sheet. Each pack contains 2 sheets, which supports paired parts, mirrored shapes and spare material for test fitting before final assembly. The flat format suits measured marking with rulers, pattern transfer from paper templates and trimming into panels, strips or backing pieces for conversions and diorama details. In workshop use, the larger sheet area helps reduce seams on wide sections and leaves more freedom when planning multiple components from one board. On the bench, the sheets can serve as base stock for custom body details, interior panels, display elements or structural additions where a consistent 1.2 mm profile matters. For hobby projects that call for clean geometry and repeatable cuts, the 2-sheet pack provides practical material for both planning and final execution.
Other accessories
Plastic Beams 3mm L, model building spare parts
300070199€6.69
Plastic Beams 3mm L brings clean white structural stock into model building work where straight lines, repeatable cuts and a consistent profile matter. The set contains 6 separate beams, each made for trimming, fitting and integrating into custom assemblies, repairs or added framework on hobby builds. The 3 mm beam format suits jobs that need narrow stock rather than broad sheet material. It can be cut to length, aligned as a brace, or used to form small supports and structural sections inside a build. The white finish keeps the material easy to see during measuring and placement, which helps when matching lengths across repeated parts. Because the beams are supplied as individual lengths, the set also works well as workshop stock for ongoing conversions and detail work. On the bench, these beams support careful scratch-building, reinforcement of existing structures and the addition of clean linear details to model scenes or custom assemblies. They are equally useful when replacing worn sections, testing a new layout or keeping matching material ready for the next stage of a build.
Other accessories
Display Case C, model display case for 1:20, 1:24
300073004soon available again
Display Case C gives finished scale models a dedicated presentation space with clear panels, a black molded base and proportions matched to 1:20 racing cars and 1:24 sports cars. The transparent cover keeps the focus on paint, markings and body shape while the dark base creates a clean visual frame around the model. The inner dimensions measure 247 x 133 x 92 mm, giving compatible builds a defined enclosure that suits shelf display, cabinet placement or a workbench setup. Outer dimensions of 260 x 144 x 105 mm make the overall footprint easy to plan when arranging several finished models side by side. The molded base can be modified to suit individual display requirements, which helps when a build calls for a particular mounting position or presentation layout. On a desk, in a hobby room or inside a display cabinet, the case turns a completed build into a focused centerpiece instead of leaving it exposed on an open surface. It suits builders who want a clear, measured way to present a finished racing car or sports car model after painting and final detailing.
Other accessories
Display Case D, display case for 1:12 motorcycles
300073005soon available again
Display Case D gives finished scale models a clean presentation with transparent panels and a black base that frames the silhouette clearly on a shelf, desk or in a cabinet. Sized for 1:12 motorcycles and also suitable for 1:24 small cars, it creates a defined space that keeps the focus on the model itself rather than the surroundings. The case measures 260 x 144 x 145 mm on the outside, with inner dimensions of 247 x 133 x 132 mm for the displayed build. That sizing supports compact vehicle subjects without wasting space around them, which helps smaller models sit neatly within the enclosure. The transparent construction keeps paintwork, markings and overall proportions visible from several sides, while the dark base gives bright liveries, chrome parts and wheel details a stronger outline. Placed in a hobby room, office or display cabinet, the case suits finished motorcycle builds that deserve a dedicated setting after assembly and painting. It also works for smaller 1:24 cars when a single model needs a tidy standalone presentation with clear visibility and a measured footprint. Warning! Not suitable for children under 14 years.
Other accessories
Display Case F, display case for 1:35 military
300073007soon available again
Display Case F gives larger 1:35 military models a clean, enclosed setting that keeps the focus on the finished build. The clear cover and black molded base create a strong contrast around paintwork and surface detail, while the overall outer size of 360 x 168 x 145 mm suits shelves, desks and display cabinets. Inside, the usable space measures 350 x 158 x 131 mm, which fits substantial 1:35 subjects rather than only compact vehicles. The format is intended for military builds and is sized for models such as a Challenger 2 or a Type 90 tank with mine roller, as stated in the product data. The base is molded in plastic and can be modified to suit a chosen layout, which helps when positioning a finished model or adapting the presentation to a specific scene. The transparent cover keeps the silhouette visible from side to side instead of closing it off with a solid surround. Placed in a hobby room, office or cabinet, the case gives a completed armored vehicle a dedicated space instead of leaving it exposed on an open shelf. It also suits builders who want a neater way to present a finished 1:35 military subject after painting, detailing and final placement on the base.
Other accessories
Clear Pla-Plate 0.2mm B4, model sheet, 5 pack
300070126soon available again
Clear Pla-Plate 0.2mm B4 is a thin model-building sheet material for custom fabrication, detail work and clean transparent overlays. The 0.2 mm thickness suits jobs where a lighter profile matters, such as window inserts, covers, layered surfaces or fine scratch-built sections that need to sit close to the base structure. Each sheet comes in B4 size, giving ample area for laying out templates, tracing repeated shapes and cutting several parts from the same piece. The clear finish helps when guide lines, printed patterns or underlying edges need to stay visible while marking and trimming. With 5 sheets in the pack, matching material is available for test cuts, alternate versions and repeat parts across the same project. This makes the set useful for scale model modification, diorama detailing and general hobby fabrication where consistent thickness is important. On the workbench, the sheets can be measured, scored and cut into custom panels, inserts or protective covers for model scenes and vehicle builds. The transparent material also suits projects that call for neat alignment over drawn plans or existing components, keeping layout work easy to follow while shaping each section.
Other accessories
Clear Pla-Plate 0.4mm B4, styrene sheet pack
300070127soon available again
Clear Pla-Plate 0.4mm B4 is a transparent styrene sheet set for model making, scratch building and custom detailing. With 4 sheets in B4 size and a 0.4 mm thickness, it gives builders a clean base for parts that need both accurate cutting and a clear finish, whether the goal is glazing, overlays or shaped panel work. The transparent material opens up uses that opaque sheet cannot cover, such as windows, lenses, shields and visible surface layers. The 0.4 mm gauge is light enough for scoring and trimming by hand, while still offering enough substance for neat edges and controlled fitting. B4 format leaves room for full-size templates, longer strips and several smaller components on one sheet, which helps when matching repeated shapes across a build. In scratch-built projects, the sheets can also be laminated, bent or cut into inserts depending on the design. On the workbench, this sheet stock suits custom vehicle interiors, aircraft canopies, architectural details and display additions that call for a transparent surface. It also works well as spare material kept alongside other modelling supplies, ready for repairs, modifications and one-off fabricated parts when a standard kit piece is not enough.
Other accessories
Clear Pla-Plate, sheet set, 0.3 mm B4 size
300070191soon available again
Clear Pla-Plate 0.3 mm B4 is a sheet material for model making, scratch building and detailed craft work, combining a large 257 x 364 mm format with transparent stock that stays easy to mark, align and trim. The clear surface lets outlines, reference drawings and underlying shapes remain visible while parts are planned, which supports accurate transfers and cleaner fitting during custom work. With 4 sheets in one pack, the set gives room for repeated attempts, mirrored parts and spare sections without cutting immediately into the last piece. The 0.3 mm gauge is suited to thin panels, glazing-style inserts, overlays and other light-detail applications where a heavier board would be less practical. The broad B4 format also leaves space for longer strips, wider panels or several smaller components laid out on one sheet. For hobby benches that move between repair work, conversions and original builds, that larger working area helps keep cuts organised. The sheets suit tasks such as replacing worn clear sections, creating custom templates or preparing neat surface details for scale scenes and hand-built assemblies. On a cutting mat beside rulers, scribers and reference sketches, the transparent stock supports careful measuring before the first cut and tidy finishing once the shape is set.
Other accessories
Foam Board 3 mm, craft board sheets, 257 x 364 mm
300070138soon available again
This foam board set brings clean sheet material and practical dimensions together for model making, display builds and general craft work. The pack contains 3 white sheets in B4 size, each measuring 257 x 364 mm, with a 3 mm thickness that gives flat panels and shaped sections a defined, easy-to-handle format on the workbench. The styrene foam core keeps the sheets light while still giving enough body for cutting, scoring and layering. Straight edges, backing panels, raised details and simple structural forms can be planned from a consistent sheet size, which helps when several matching parts are needed in one project. The white surface also works well as a neutral base for drawn guide lines, coverings, printed graphics or painted finishes, depending on the build. On architectural mock-ups, diorama sections, signs or presentation boards, the format supports quick layout work and tidy assembly. The 3-sheet pack also leaves material ready for test cuts, repeated shapes or separate stages of a larger hobby project, whether the goal is a clean display panel or a lightweight scenic element.
Other accessories
Pla-Paper 0.1mm B4, styrene sheet for model making
300070208soon available again
Pla-Paper 0.1 mm B4 is a thin white sheet material for model making, scratch-building and detail work, with a large 257 x 364 mm format that leaves room for full templates, long strips and broad surface sections in one piece. The 0.1 mm thickness suits jobs where a light overlay or finely cut addition is needed rather than a heavier panel. The B4 size gives more continuous working area than small offcuts, which helps when laying out repeated shapes or trimming larger covers. With 3 sheets in the pack, the same material can be kept on hand for matching parts, trial pieces and follow-up adjustments during a build. The white finish also makes pencil lines and cut marks easy to place when preparing patterns or fitting custom sections. On a workbench, the sheets can be used for body details, interior panels, templates or surface skins on scale projects. They also fit general hobby tasks that call for thin, even sheet stock, whether the goal is refining an existing model or creating new parts to match a planned design.