RC attachment parts
Pimp your ride with the RC attachment parts from Tamiya: from rear spoilers and bumpers to many other details for a customised look!
RC attachment parts
Pimp your ride with the RC attachment parts from Tamiya: from rear spoilers and bumpers to many other details for a customised look!
More
Attachment parts
1:10 Porsche 911 GT3 R (992), RC assembly kit
300051756€8.99
This 1:10 RC assembly kit brings the Porsche 911 GT3 R (992) into a build centered on scale form and track-ready layout. The polycarbonate bodyshell measures about 479 mm long, 188 mm wide and 127 mm high, and it recreates the car's aerodynamic shape with separate polycarbonate rear wing and light cases for added depth across the finished shell. Black molded parts depict the side mirrors and wing stays, adding crisp contrast against the painted body. The TT-02 chassis uses a shaft-driven 4WD layout, and its widely used design gives the build a clear mechanical structure with room to explore setup changes over time. A short 251 mm wheelbase defines the stance, while black 10-spoke wheels and slick tires complete the touring car look. Item 51226 Urethane Bumper L is included to support body protection during running. ESC and a Type 540 Torque-Tuned motor are part of the kit, and stickers plus masking stickers help with livery work and paint lines. On a workbench, the separate body parts and finishing materials turn painting into a focused stage of the build. Once assembled, the chassis layout, wheel package and detailed shell suit practice runs, shelf display, and repeat sessions spent refining setup and finish. Radio gear, a battery pack, a charger and paints are required separately. Warning! Not suitable for children under 14 years.
Attachment parts
1:10 Racing Wing Alpha, RC body accessory
300054729€12.49
This 1:10 Racing Wing Alpha adds a focused touring car finish with a stepped wing element and a pre-printed carbon fiber pattern on the polycarbonate surface. Mounted at the rear of a compatible body shell, it changes both the styling line and the down force effect in a way that suits race-oriented body setups. The set contains 1 Racing Wing A, 1 J Parts set for the wing stays, plus snap pins and O-rings for attachment. Installation requires a body shell with space to make attachment holes, and the fitting guide specifies a flat mounting area of 70 x 12 mm with 4 mm holes. The wing angle can be changed by reversing the direction of part J1, which alters the mounting position and gives a straightforward adjustment point during setup. The wing part arrives with the carbon pattern already printed, so the surface detail is built into the part itself rather than added later. On a touring car shell, the rear wing sits as a visible finishing element above the back deck and supports a more competition-led look. It suits body customisation, replacement builds and race-day setup changes where shell fit, wing angle and rear styling all need to work together. Warning! Not suitable for children under 14 years.
Attachment parts
1:10 Racing Wing Set 3, RC body accessory
300022015€18.39
Racing Wing Set 3 brings a competition-style rear aero update to 1:10 R/C touring car bodies that already have attachment holes for optional wings. The set combines 2 wing designs with 2 end-plate styles, creating multiple visual and setup options while keeping the fit focused on touring car shells in this scale. The wing parts come with a pre-printed carbon pattern, which gives the surface a technical finish before any extra detailing begins. One set of J parts serves as the wing stays, and the included snap pins, O-rings and screws handle attachment duties for the assembled rear wing section. The larger end-plates are not fixed to a single format: a marked cutline allows them to be adjusted between large and medium size. That added trimming option helps tailor the outline more closely to the body shape being used. Mounted on a touring car shell, the wing changes the rear profile with a clear racing look that suits track-focused builds, display bodies and refresh projects alike. It also works well when an existing shell already has wing holes and needs a replacement assembly with more than one styling route in the same pack.
Attachment parts
1:10 Rallye-Cockpit-Set Left-Hand-Drive, cockpit set
300054491€24.79
The 1:10 Rallye-Cockpit-Set Left-Hand-Drive adds a defined interior layer to compatible Tamiya rally car body sets, bringing a visible cockpit and helmet into the cabin area for a more convincing scale look. As an updated version of Item 50463, this set is designed for builders who want to move beyond an empty shell and give a rally body more presence when viewed through the windows. The set contents focus on interior conversion rather than bodywork replacement. A vacuum-formed cockpit section creates the main cabin structure, while the separate helmet piece adds a driver detail that suits left-hand-drive rally layouts. The newly included urethane sponge broadens compatibility by accommodating a wide range of chassis widths, which helps when matching the interior to different 1:10 rally platforms. Newly designed stickers provide instrument and trim graphics that can sharpen the dashboard area once applied. Plastic model paints are required separately for custom finishing. This cockpit set suits rally body projects where the shell remains the visual centrepiece but the cabin still matters at close range. It works well for fresh builds, body refreshes and reworked display cars, especially when clear windows leave the interior easy to see during shelf display or trackside preparation.
Attachment parts
1:10 Touring Car Cockpit Set Left-Hand, RC accessory
300054298€23.79
This 1:10 Touring Car Cockpit Set Left-Hand brings a more lifelike cabin view to 190 mm touring car bodies, turning a clear shell into a model with visible interior depth, driver detail and dashboard presence. The vacuum-formed cockpit insert sits inside the body shell and gives left-hand-drive touring car builds a more realistic look when viewed through the windows. The set is designed as a customizable interior insert rather than a fixed one-shape part. The cockpit can be trimmed to match different body shells, and holes can be opened to suit body mount posts and antenna tube positions. Included parts support extra detailing, with a driver helmet that can be assembled in 2 versions, with visor or without visor, plus dashboard and helmet stickers for instrument and trim graphics. Velcro tape is used to attach the insert inside the shell, while 5 urethane spacers help fill wider gaps between the body and cockpit. Two tapping screws are included for assembly. Plastic cement and paints are required separately. On the bench, the set suits careful fitting, painting and finishing work for touring car shells that need a more complete interior view. Once installed, the cockpit adds visible structure behind the windscreen and side windows, making display runs, shelf presentation and scale photography look more convincing. Warning! Not suitable for children under 14 years.
Attachment parts
1:14 Mirror/Steps 56375, scale model parts
319115577€24.99
This 1:14 Mirror/Steps 56375 parts set adds exterior detail to a scale vehicle build with chrome-finish components arranged on a single sprue. Mirror pieces, step sections and trim elements give the bodywork sharper definition, while the reflective surface helps these fittings stand out against painted cab and chassis sections. The frame shown for this set carries multiple accessory shapes, including narrow side-step style parts, perforated plates, curved guard pieces, bracket forms and a larger box-like panel with molded circular detail. That mix supports restoration work on an older build as well as fresh detailing during a new assembly. Because the parts arrive unassembled on the runner, placement follows the needs of the specific model section being completed or refreshed. The metallic finish also suits display builds where smaller exterior fittings need the same visual presence as the main body panels. On the bench, this set fits naturally into body detailing, replacement work and finishing stages where mirrors or steps define the look of a working vehicle. In a display setting, the added fittings help a 1:14 truck or utility-style model read with more depth from side and front viewing angles. Warning! Not suitable for children under 14 years.
Attachment parts
1:14 Y Parts Fenders 56375, model spare parts
319225246€19.79
This 1:14 Y Parts Fenders 56375 set supplies moulded body components for scale model assembly, centring on curved fender sections and related support pieces that shape the outer wheel-area bodywork. The black parts arrive attached to sprues, which keeps the individual sections organised for identification, trimming and fitting during the build or repair process. Alongside the main fender pieces, the set shows rectangular panels with circular mounting holes, a larger frame-style section and smaller connector-like parts, giving the builder the specific body elements needed for this spare-parts group. The moulded format suits precise cleanup before installation and helps maintain consistent part geometry across matching left and right sections where the design requires it. As a replacement set, it is useful when an existing build needs fresh outer panels after wear, damage or a missing section. The 1:14 scale makes it relevant for large-format truck modelling where body proportions and wheel coverage need to stay true to the original layout. On the workbench, the sprue arrangement makes it easier to sort the different shapes before cutting them free and test-fitting them to the model. In a restoration or continuation build, these fender parts help return the bodywork to a complete, coherent look with the correct shaped sections in place. Warning! Not suitable for children under 14 years.
Attachment parts
Adjustable Wing Stay Set, RC body accessory
300054773€45.79
This aluminum wing stay set adds a wider range of rear wing adjustment to touring car body setups, with angle positions in 8° increments from 8° to 32°. The layout supports clear, repeatable changes when the rear wing needs a lower or steeper mounting angle for a different body configuration. The stay design also moves the wing farther back than the previous aluminum wing mount, with 10 mm or 20 mm rearward positioning depending on the attachment holes used. The set contains 2 wing stay mounts and 2 adjustable parts, and the document image shows matching hardware such as screws, washers, spacers and O-rings for installation. It is intended for touring car bodies with enough room to create attachment holes, so the shell itself determines the final fit. Wing parts are sold separately. Compatible wing sets named in the data include 54729 RC Racing Wing Carbon Pattern, 54688 RC Racing Wing Set 2 Carbon Pattern, 54494 RC Racing Wing Set 2, 54458 RC Racing Wing B, 54457 RC Racing Wing A, 53604 RC Racing Wing Set and 53470 RC Lightweight Wing Carbon. On a prepared touring car shell, the adjustable stays support fine rear aero positioning for track-focused body tuning.
Attachment parts
Alfa Romeo Giulia H Parts, model car trim sprue
309005512€14.49
This H parts sprue for an Alfa Romeo Giulia model concentrates on the brightwork and small fittings that define the car's character. The chrome-plated runner presents front-end trim pieces in a clean layout, including the grille section, round headlight components, side mirrors and a steering wheel, so the build gains the crisp visual accents associated with a classic Italian saloon. Each component remains attached to the molded frame until the chosen stage of assembly, which keeps the smaller parts grouped and easier to sort during the build. The reflective plated finish gives exterior details a distinct contrast against painted body panels, while the steering wheel adds a matching focal point inside the cabin. Because the sprue gathers several visible trim elements on one runner, it supports a more coherent look across the front fascia and interior touchpoints. On the workbench, this parts set suits careful trimming, test fitting and finishing alongside the main body sections of the model. Once installed, the grille, lamps and mirrors help the Alfa Romeo Giulia shape read clearly from front and side angles, while the steering wheel completes the dashboard area with a period-style detail. Warning! Not suitable for children under 14 years.
Attachment parts
BBX Driver Figure Z Parts, model accessory set
319225151€6.29
BBX Driver Figure Z Parts add molded detail components to a figure-focused model build, with white unassembled pieces arranged on a sprue for clean removal, preparation and fitting. The set brings a distinct ornamental look through a rectangular panel with a sculpted bird motif, creating a strong visual accent when worked into a compatible BBX layout. Alongside the main panel, the sprue carries 2 rounded cap-like parts with central holes, 1 small rectangular piece with a hole, 1 circular ring piece and 1 curved half-ring piece. One rounded component features an embossed face-like detail, introducing another shaped surface that can change the finished look of the assembly. The visible connection points indicate a peg-and-hole joining method, so placement and orientation can be checked before final fixing. The molded format also keeps the individual sections grouped together until the build reaches the fitting stage. On the workbench, these parts suit builders refining a driver figure area or adding themed trim to a BBX project. The separate components support careful cutting, dry fitting and positioning, making the set a focused choice for detail work within a larger model assembly. Warning! Not suitable for children under 14 years.
Attachment parts
Blackfoot 3 G-Parts Glasses Smoke Spare Set
319005372€8.89
The Blackfoot 3 G-Parts Glasses Smoke spare set supplies the tinted glazing needed to refresh the body appearance of an existing Blackfoot 3 build. Transparent brown injection-molded pieces on a single sprue provide the shaped window sections shown for this replacement set, giving the body its smoked screen look again once fitted. The formed parts include a large curved windshield section and an additional wide curved panel, along with molded attachment points that stay connected to the frame until removal. That layout helps keep the clear pieces together during storage and preparation, instead of leaving loose glazing parts to pick through one by one. The transparent material keeps the window areas visually open, while the smoke tint changes the overall body character compared with fully clear glazing. As a model spare, this set is aimed at repair, restoration or parts replacement rather than a complete vehicle build. It suits workshop use when an original screen has been scratched, lost or damaged, and it also fits rebuild projects where an older body needs fresh glazing to complete the shell again. For shelf display, the tinted panels restore the darker window finish that helps the Blackfoot 3 body look complete and consistent. Warning! Not suitable for children under 14 years.
Attachment parts
Body and Driver Figure Parts Set for 58618 Model
319115431€8.99
This parts set brings the body shell and driver figure elements for the 58618 Mt.Bee. build together on one red moulded sprue, giving the model its distinctive outer form and a seated cockpit character. The unassembled frame groups the major pieces clearly, so each section can be identified before cutting, fitting and final placement on the vehicle. The visible moulded components include a rounded shell with wheel openings, a separate rectangular panel, additional flat cover sections, a torso with arms in a driving pose, a driver head, a helmet shell, a steering wheel, 2 pedal-shaped parts and several small connectors. That mix supports both the visual identity of the model and the interior driving position rather than covering only one area of the build. The driver parts are supplied as separate pieces, which allows the figure and helmet to be assembled in sequence before installation. The steering wheel and smaller fittings add the control details that complete the cockpit scene. On the bench, the sprue layout helps keep the body and figure parts together during preparation for the 58618 Mt.Bee. model. Once assembled, the shell panels and driver components work together to give the vehicle a finished appearance with a clear seated driving setup. Warning! Not suitable for children under 14 years.
Attachment parts
Body/Rear Wing Mount, model spare parts set
319005328€7.39
This spare parts set provides molded E parts for body and rear wing mounting, centered on the P956/C11 designation shown in the product data. The black runner holds multiple matching components together, including side frame panels, bracket forms, rod-like elements, ring-shaped parts and a narrow oval plate with 3 holes, all arranged as one coordinated replacement set. The two larger side pieces show triangular cutout bracing and 3 circular openings each, giving this set a clearly defined structural layout for mounting work. A central circular ring-like part connects to angled supports, while smaller connector elements and a block-style bracket add further attachment points within the same sprue. Because the parts remain molded on the runner, each shape is easy to identify before separation and assembly. The molded markings TAMIYA and JAPAN are visible on the sprue in the image. This set suits repair, restoration or parts replacement on a compatible model where the original body or rear wing mount needs renewal. It also helps keep an existing build consistent when matching left and right structural pieces are required in the same section. Batteries are not included. Warning! Not suitable for children under 14 years.
Attachment parts
Bruiser 4x4 Driver Figure, model accessory
300054416€10.19
The Bruiser 4x4 Driver Figure is a model accessory created to bring a more convincing cockpit scene to the 2012 release of the Toyota Bruiser RN36. Built as a seated driver, the figure is shaped for placement inside the cabin, where the driving position gives the vehicle interior a more complete scale appearance. The set contains 10 parts for assembling 1 figure and focuses on the details that define a driver at the wheel. Separate arms, a torso with legs in a seated pose, and a steering wheel are included as individual components, allowing the build to follow the layout of a driving scene rather than a standing display figure. The parts also include 2 head options and a separate helmet shell, which adds flexibility to the final look while staying within the off-road vehicle theme shown by the Bruiser name. As an accessory rather than a full vehicle kit, this set concentrates on one specific area of the model: the cabin and its visible occupant. Placed behind the wheel, the assembled figure changes how the interior reads through the windows and open cabin area. It suits builders refining a Bruiser restoration, a shelf display, or a finished truck prepared for closer scale detailing. Warning! Not suitable for children under 14 years.
Attachment parts
Buggy Driver Figure Set, model accessory parts
300054626€5.19
The Buggy Driver Figure Set adds a helmeted cockpit figure and matching headlight details to buggy models, bringing a stronger sense of scale to off-road builds. The seated driver shape gives the cockpit area a clear focal point, while the extra front-end parts help the body shell read more like a complete machine on the bench or on display. The set includes figure parts with helmet, headlight parts, screws and washers for assembly. Instructions show 3 x 10 mm, 3 x 12 mm and 3 x 8 mm tapping screws used across the mounting steps, plus 2 washers. The driver can be fixed to the chassis or to the body, depending on the model, which gives added flexibility when working with different buggy layouts. If body mounting is used and no opening is present, a 3 mm hole may need to be made. Double-sided tape is sold separately for chassis mounting. Paint can be applied to the figure and headlights to match the chosen buggy style, from race-inspired color schemes to weathered off-road finishes. Once fitted, the seated driver and front lights sharpen the character of a buggy shell, whether the model is being prepared for a shelf, a photo setup or a detailed restoration project.
Attachment parts
C-Parts bumper chrome, model spare parts for 58347
309005229€15.49
This C-Parts bumper chrome set is a model spare parts sprue for 58347, supplied as chrome-plated components for exterior replacement or restoration work. The metallic finish gives bumper and trim areas the bright plated look shown on the original design, while the sprue format keeps each piece arranged and easy to identify before removal. The set shows a mix of shaped detail parts, including long pipe sections, grille-style forms, narrow rod-like pieces, conical elements, a ring connector and several small cylindrical connectors. Molded part numbers are visible beside multiple pieces, supporting careful matching during assembly and helping separate similar shapes when a rebuild calls for exact placement. The chrome-plated surface highlights contours and edges clearly, which is useful when preparing visible body details that need a uniform finish. At the workbench, this sprue suits repair jobs, incomplete builds or refresh projects where original brightwork needs to be replaced with matching parts. It also supports stock-correct restoration of model 58347 when exterior details such as bumper sections or plated accents are no longer complete. Warning! Not suitable for children under 14 years.
Attachment parts
CC-01 E-Parts Front Bumper, model spare parts
300005523€20.99
The CC-01 E-Parts Front Bumper set provides the molded front-end sections needed when a compatible model needs fresh exterior hardware. Attached to a single runner frame, the parts can be removed, cleaned up and prepared for installation as part of a careful repair or replacement job. Visible components include a tubular bumper assembly, a silver-gray grille piece, brackets, posts, connector sections and small round caps or spacers. The injection-molded layout keeps these matching pieces together in one set, which helps when restoring the front area with the correct shapes and attachment points. Multiple screw holes and molded openings are built into the larger mounting sections, supporting accurate positioning during assembly. The unused sprue format also makes it easy to identify each section before cutting and fitting begins. This spare-parts set suits bench work focused on maintenance, rebuilds or replacing damaged front trim on a CC-01 vehicle. It can be used when refreshing a shelf model after wear or when returning a regularly driven chassis to a tidier front-end appearance with the proper molded components.
Attachment parts
D-Parts Bumper Chrome, model parts for 56301/56304
300005470€33.99
D-Parts Bumper Chrome is a chrome-plated parts set for 56301 and 56304, intended for model builds that need matching exterior sections with a bright metallic finish. The molded pieces come attached to a sprue, so each section remains clearly arranged before removal and fitting during assembly. The set contains several differently shaped components visible in the parts frame, including curved cylindrical pieces, elongated side sections, narrow covers and bracket-style elements. A diamond-plate textured panel adds another distinct detail for areas where a tread-pattern surface suits the vehicle layout. The reflective chrome plating gives these parts a uniform appearance across the visible exterior sections. Because the parts are supplied for 56301 and 56304, the fit and visual style stay aligned with those specific model references rather than a generic vehicle body. On the workbench, the sprue layout helps with checking each molded section before cutting, trimming and placement. During a restoration, replacement or fresh build, the plated finish supports a clean match across bumper and trim areas that stand out once the model is assembled.
Attachment parts
DF-03 Body with Wing, RC bodyshell set
300555108€30.49
The DF-03 Body with Wing is a replacement bodyshell set for chassis 58370, bringing back the sharp off-road buggy profile with one matched shell and rear wing. Formed as exterior parts rather than a complete vehicle, this set suits rebuilds after race wear, workshop damage or a fresh visual reset before the next run. The bodyshell covers the central chassis layout and defines the buggy's low, aerodynamic lines, while the separate wing completes the rear section with the same competition-focused shape used on the original model. As an unpainted set, it leaves room for custom liveries, replica graphics or a clean single-colour finish that fits an existing fleet. The shell format also makes it useful as a spare kept ready between running sessions, so a damaged exterior can be swapped without interrupting the setup of the chassis underneath. On the bench, the set supports restoration work on a DF-03 build that has seen repeated dirt-track use. It also fits display refreshes, repaint projects and second-shell preparation for different looks across club running, shelf presentation or event weekends. Warning! Not suitable for children under 14 years.
Attachment parts
Driver Figure A-Parts, model accessory for Sand Rover
310005141€13.79
This A-Parts driver figure set is a dedicated model accessory for the Sand Rover 58500, created for builders who need the specific cockpit figure section rather than a complete vehicle kit. The designation points directly to the matching application, which helps keep restoration, replacement and parts planning tied to the correct model. Used during repair work or a fresh build based on original spares, the figure section restores a key visual element in the driver area. The A-Parts format identifies this as one defined sprue group, which is useful when sorting components on the bench or checking compatibility against an existing Sand Rover 58500. Because the data names the driver figure specifically, the set suits projects where the cockpit appearance needs the correct matching part instead of a generic substitute. On a workshop table, in a spare-parts drawer or beside an in-progress Sand Rover chassis, this accessory fits naturally into careful model maintenance. It supports clean replacement work when an original figure section is missing, damaged or set aside for repainting. Warning! Not suitable for children under 14 years.
Attachment parts
DT-02 Holiday Buggy A-Parts Roof, spare part
319005086€13.99
The DT-02 Holiday Buggy A-parts roof is a dedicated spare part for kit 58470 and serves as the matching roof section for this specific model. Its model-linked designation helps keep repairs aligned with the original parts layout, which matters when a body shell needs a clean replacement rather than an improvised fit. Within the DT-02 Holiday Buggy parts structure, the A-parts reference identifies where this section belongs in the overall body assembly. That makes it useful for maintenance benches, rebuild projects and planned body restoration after wear from transport, storage or regular running. The focused fit also helps avoid mixing unrelated components across similar buggy ranges when a precise replacement is needed. This spare part suits repair work that aims to return the model to its intended appearance and parts configuration. It also fits hobby setups that keep key replacement sections on hand for ongoing upkeep of kit 58470 between running sessions, rebuilds and body refresh work.
Attachment parts
DT-04 F Parts Frame, chassis parts set
300051757€16.99
The DT-04 F Parts Frame provides a focused replacement set for the new DT-04 chassis, bringing together moulded structural sections used around the outer frame and body mounting areas. The frame format keeps each section connected on the sprue until needed, which helps when checking shapes and selecting the right piece for a repair or rebuild. Among the included parts are the roll cage, bumper, body mounts and wing mounts, along with further matching sections from the F-parts group. This makes the set useful when worn, damaged or missing chassis pieces need to be restored with parts intended for the same DT-04 platform. The grey moulded layout shown in the set gives a clear overview of each section before removal. Because the parts come as one coordinated frame, workshop organisation stays straightforward while individual pieces are trimmed and fitted where required. The set suits bench repairs, partial chassis refreshes and planned spare stocking for DT-04 running gear projects. It also supports rebuild work after heavy use, where mounting points and exposed frame sections often need direct replacement rather than improvised fixes. Warning! Not suitable for children under 14 years.
Attachment parts
EVOII Mirror Rear Wing Parts, model accessory
319004524€8.79
This accessory set supplies the H-/J-Parts for the EVOII, covering mirror and rear wing components in white for body finishing, replacement or restoration work. The defined part grouping keeps key exterior details together, helping the model retain the intended outline once fitted. The white moulding gives a neutral base that can be used as supplied where the colour match fits the build, or prepared further for a more specific finish. Because the set is limited to mirror and rear wing elements, it addresses a precise area of the body rather than spreading across unrelated sections. That makes it useful when a project needs the rear aero detail renewed, a damaged mirror replaced, or an incomplete shell brought closer to its intended appearance. On a workshop table, these parts support careful rebuilds and body refresh tasks where small exterior elements make a visible difference. They also suit long-stored models that need the correct finishing pieces added back before display or running sessions. Warning! Not suitable for children under 14 years.
Attachment parts
F-Parts Roof w/spoiler, model parts for 56318
309005842€22.49
F-Parts Roof w/spoiler provides the roof and upper body section for 56318 as white molded components on sprues. The set centers on 2 exterior pieces: a larger rectangular roof panel with rounded corners and a matching curved section with spoiler-style shaping, giving restoration or replacement work the exact area needed for the body shell. The main roof piece carries recessed panel lines, several mounting holes and a central rectangular cutout that defines the opening in the upper surface. Those molded details matter during a rebuild because they guide alignment with the surrounding shell and preserve the intended body layout instead of forcing a generic substitute into place. The second piece adds the raised contour of the upper rear section, so the roofline keeps its original profile when an older shell is repaired or refreshed. The white finish also leaves the parts ready for the usual preparation steps before final assembly and paint. Used in a repair project, the set helps return a worn or damaged cab section to its intended shape. It also suits a clean rebuild where the roof area, cutout and spoiler contour need to match 56318 rather than being adapted from another shell. Warning! Not suitable for children under 14 years.
Attachment parts
F104 2017 Wing Set Black, RC spare wing set
300051604€22.79
The F104 2017 Wing Set Black is an RC spare wing set shaped for the original 2017 Formula One body design from Tamiya. Molded front and rear aero parts follow 2017 Formula One regulations and dimensions, giving an F104-based race car the correct visual profile after damage, wear or a rebuild. The package contains H Parts for the rear wing and J Parts for the front wing, both supplied as molded components that can be prepared to match an existing body finish. Alongside the main wing sections, the set also includes mounting hardware such as screws, nuts and clips shown in the contents image, so the replacement work can focus on the wing area rather than sourcing separate fasteners. Compatibility extends across F104 PRO, Pro II, TRF101, 102 and Pro Version II chassis cars, and the set also matches body parts set 51602. This spare set suits workshop use after track contact, curb strikes or general wear on exposed aero sections. It also supports restoration of an older Formula chassis where the original front or rear wing shape needs to be brought back to the 2017 specification look for display, maintenance or the next running session.
Attachment parts
Ford Escort Customs H Parts, model spare parts
319005564€9.99
H Parts Ford Escort Customs 58691 is a model spare parts set created for the Ford Escort Customs 58691 reference. The designation points to a dedicated replacement group rather than a general-purpose accessory, which makes it useful when a specific section of the original model needs to be restored with matching components. In workshop use, a model-specific spare parts set helps keep repair work aligned with the original build instead of relying on approximate substitutes. That matters when the shape, mounting points or visual detailing of a replacement part need to correspond to the base model. The H Parts designation also helps identify the correct section within a larger build or maintenance plan, which can simplify reordering and parts organisation when several assemblies are handled at once. This set fits naturally into repair benches, long-term model upkeep and careful restoration of an existing Ford Escort Customs 58691 build. It also works as a practical reserve for hobby storage, where keeping the correct replacement group on hand can shorten interruptions during maintenance.
Attachment parts
Golf II GTI J Parts, clear lightcase set
319115555€8.29
This J Parts lightcase set supplies clear molded components for the Golf II GTI and brings back the sharp lamp detailing that gives a scale car body its finished look. The transparent parts arrive on a sprue, making each section easy to identify before removal and fitting during a careful model build or restoration task. The set focuses on the light areas of the body and is suited to replacing worn, missing or damaged clear sections on a compatible Golf II GTI model. The molded runner shown in the set keeps the individual pieces organized until they are trimmed free, which supports precise preparation at the bench. Clear material is especially useful on lamp sections because it preserves the intended lens appearance instead of covering those areas with opaque parts. The compact parts layout also makes this set a practical addition to a spares box for ongoing maintenance of an existing build. On a restoration project, the fresh clear sections help return definition to the body shell once the main paint and trim work are complete. For a new compatible build, the set supports accurate finishing of the lighting details and gives the model a cleaner, more complete appearance when viewed up close.
Attachment parts
GR Supra H Parts, model accessory sprue
319007358€9.49
This H parts sprue for the GR Supra centers on exterior detail pieces that change the finished look of a model car with crisp, race-inspired body hardware. The black molded runner carries a large rear wing assembly, mirror parts and smaller mounting components, giving builders the exact shapes needed for restoration work, replacement or a fresh body finish. The rear wing is formed as a multi-part assembly with a wide main plane, separate endplates and support elements, so the completed section can add the distinct raised spoiler profile associated with tuned road cars and circuit styling. Keeping every piece attached to the sprue before trimming helps with part control during painting and test fitting, especially when several small components need to stay matched to one body project. The black material also provides a practical starting point for trim areas that remain dark after assembly. On the bench, this set supports body refreshes after wear, missing parts or custom repaint sessions where original exterior details need to be replaced. It also suits careful finishing work, where mirrors, supports and aero parts are prepared in sequence, then fitted to bring a GR Supra shell back to a complete and cohesive appearance.
Attachment parts
H Parts Bag, model spare parts for M-B CLK-GTR
319006833€14.99
This H Parts Bag is a model spare parts pack for the M-B CLK-GTR and is identified in the source data with reference 47437. It supports repair, replacement, or restoration work where the original H parts group is needed to keep a compatible build aligned with its intended specification. The designation H PARTS BAG(H)(FOR CARRY) : 58214 provides the clearest guide to the exact spare set. Rather than mixing general-purpose replacements into a detailed model, this pack gives builders the named parts grouping assigned to that application. That makes it useful when an existing build needs a like-for-like replacement during maintenance, rebuild work, or parts sorting at the bench. The pack format also helps keep the grouped components together while planning a repair. In practical use, this spare set fits best into workshop stock for ongoing model care, especially when a compatible M-B CLK-GTR build is already in service or being refreshed. It can also support rebuild projects where the original designated H parts need to be matched by name before installation. Warning! Not suitable for children under 14 years.
Attachment parts
H-Parts Chrome S.Clod Buster, model spare parts
300004894€17.29
H-Parts Chrome S.Clod Buster 58321/58423 supplies chrome-plated replacement parts for compatible S.Clod Buster model builds. The bright plated finish gives visible sections a metallic look that stands out on completed bodywork and helps restore the intended appearance on older builds. The parts come as a molded sprue, so each section stays organized before removal and fitting. This format helps during rebuilds, maintenance and careful parts selection, especially when only specific exterior sections need replacing. The set is intended as model spare parts rather than a full vehicle kit, making it a practical choice for ongoing workshop use, restoration projects or keeping a build consistent with its original detailing. The product image shows multiple shaped components, including trim-style sections, bracket forms and round lamp-style housings, all presented in chrome effect. On the bench, these parts fit naturally into repair sessions, detail upgrades or the refresh of a shelf model that has lost finish quality over time. They also suit hobby stock for builders who maintain compatible S.Clod Buster vehicles and want matching replacement pieces ready when exterior parts need attention.
Attachment parts
J-Parts Chrome Clod Buster Bumpers, model parts
309115021€14.49
J-Parts Chrome Clod Buster Bumpers are replacement model parts for the 58065 version and focus on one of the most visible exterior areas of the truck. The chrome finish restores the plated look associated with this designation, giving rebuilds and repairs a cleaner, more complete appearance once fitted. These parts are suited to maintenance work where original bumper pieces are worn, missing or ready for a visual refresh. Because the set is tied to the 58065 reference, it gives builders a concrete fitment point when matching parts to an existing chassis. The emphasis here is not on a generic trim piece but on a model-specific bumper set intended to preserve the established Clod Buster look. That makes it useful for careful refurbishment, partial repairs or a more faithful visual reset during a longer rebuild. On the bench, these bumpers fit naturally into restoration projects where exterior details matter as much as running condition. They also suit shelf-display rebuilds, replacement after damage, or keeping a 58065-based truck visually consistent with its original chrome-accented finish. Warning! Not suitable for children under 14 years.
Attachment parts
L-Parts L1-4 Window, model spare part set
319115269€10.99
L-Parts L1-4 Window is a model spare part set identified for reference 58452. The designation points to a defined window section, making it a practical choice when a matching replacement is needed during repair, restoration or careful parts sorting for an existing build. The L1-4 grouping helps distinguish this set from other body-related components and keeps the replacement focused on the correct section rather than a general mixed assortment. That clear designation is useful on the workbench when a build is being maintained over time, when damaged sections are being exchanged, or when original parts need to be refreshed with the correct matching piece set. The reference to 58452 ties the set to a specific model entry, which supports accurate part selection and reduces guesswork during maintenance. This spare part set fits naturally into workshop routines such as replacing worn body glazing sections, preparing parts before final body assembly, or organizing a restoration project around model-specific components. For collectors and builders maintaining an existing model, a clearly identified replacement set helps keep the work precise and orderly. Warning! Not suitable for children under 14 years.
Attachment parts
Lunch Box E Parts Spare Set for Model Kit
309005231€8.89
This E Parts spare set for the Lunch Box based on 58063 supplies the shaped transparent components used on the model, making it a practical choice when original fitted sections are missing, marked or due for replacement. The smoky-tinted finish and injection-moulded polystyrene construction give each piece the defined curves and clear contours needed for accurate placement on the body. The set is shown with 2 main moulded sections and smaller round clear details still attached to the sprue, so each part can be identified before removal and fitting. Visible locator points and formed mounting areas support precise positioning during assembly or restoration work, while the dedicated E Parts designation helps match the set to the correct build reference for 58063. The transparent pieces are shaped for model-specific use rather than generic trimming, which matters when replacing body glazing or other clear fitted elements. On a restoration project, the set can return a worn Lunch Box shell to a more complete appearance; on a repair, it provides the exact replacement category needed instead of adapting universal sheet material. It also serves as a useful stock part for long-term maintenance of an existing 58063 build. Warning! Not suitable for children under 14 years.
Attachment parts
M-Parts Bumper Chrome Parts Set for Model Car
309115169€23.29
M-Parts Bumper Chrome Parts for 58372 add bright exterior detailing to a compatible model vehicle build. The set is centered on chrome-colored trim pieces and bumper elements, giving the body shell a more defined front section and a sharper finished appearance once fitted. The included molded parts appear to cover several visible exterior zones, including front-end trim and side detailing elements. That makes the set useful when an older build needs replacement dress parts or when a fresh body finish calls for matching brightwork across multiple sections. Because these are styling and body-detail components rather than drivetrain parts, the visual change is immediate and easy to spot on the completed model. The separate pieces also support more precise placement during assembly and finishing work. On the bench, the set fits naturally into restoration, repair or customization projects for the 58372 platform. It can be used to replace missing trim, refresh worn-looking bright parts, or complete a body with the crisp contrast that chrome-colored accents bring to grilles, bumpers and side sections. Warning! Not suitable for children under 14 years.
Attachment parts
Mercedes-AMG GT3 EVO Spoiler Lightcase Set
311835807€15.39
This accessory set supplies polycarbonate spoiler and lightcase parts for the Mercedes-AMG GT3 EVO bodyshell, giving RC builders the shaped components needed to complete or refresh key exterior details. The parts follow the visual character of the GT3 race car, with the rear wing section and lamp housings defining areas that stand out strongly once the shell is finished. Used during a replacement, repair or body refresh, the set focuses on 2 exterior zones that often matter most to the final look: the rear aero element and the front and rear light surrounds. Polycarbonate keeps the parts aligned with common RC body material choices and supports a consistent fit and finish on the shell. This makes the set useful when an existing bodyshell has damaged trim parts or when a fresh body requires the correct shaped add-ons for the Mercedes-AMG GT3 EVO design. On the workbench, the parts suit careful body preparation, painting and final detailing of a race-inspired touring car shell. Once fitted, the spoiler and lightcase sections help the bodyshell present the sharper silhouette and lamp definition associated with the full-size Mercedes-AMG GT3 EVO. Warning! Not suitable for children under 14 years.
Attachment parts
Midnight Pumpkin E Parts, model spare parts
309005796€14.79
The E Parts set for Midnight Pumpkin 58365 is a dedicated spare parts pack for restoring or maintaining this specific model with matching replacement components. Chrome-finished molded pieces recreate the metallic exterior look shown on the original build, making the set useful when worn, damaged or missing parts need to be exchanged with the correct shapes. The sprue includes larger trim sections together with smaller mounting components, all formed as model spare parts rather than as a complete vehicle kit. The molded layout keeps the pieces attached until removal, which helps with identification during repair work and supports a controlled fitting process at the workbench. This set is intended for Midnight Pumpkin 58365, so the mounting geometry and part selection follow that model designation rather than serving as a universal assortment. On a shelf display model or an RC build that has seen regular running, replacement parts like these help return the original appearance without changing the character of the vehicle. For refurbishment projects, rebuilds or keeping a long-owned model in running order, the set adds the exact E sprue components needed for the next repair stage. Warning! Not suitable for children under 14 years.
Attachment parts
N-Parts mirror H58372, model spare part set
309115170€8.79
N-Parts mirror H58372 provides a dedicated spare part set for model building work where the correct exterior components matter. The set arrives as white injection-molded parts on a sprue, a format that keeps the pieces together before trimming, test fitting and final installation on the intended compatible build. The visible part group includes a large curved panel as well as 2 smaller rounded components, each linked to its own curved support piece. Mounting pegs and screw holes are molded into the larger section, giving the builder defined connection points instead of relying on improvised placement. That structure helps when replacing lost parts, correcting damage, or preparing a restoration with matching shapes from the original part family. The unpainted white finish also leaves the surface ready for the usual model preparation steps according to the needs of the build. On the workbench, this kind of spare sprue supports careful repair sessions, parts replacement, or completion of an older kit that needs the correct mirror-related components again. It also suits organized stock keeping for model workshops where specific replacement trees are kept ready for future maintenance. Warning! Not suitable for children under 14 years.
Attachment parts
P-Parts Blitzer Beetle 58122, model parts set
309115051€12.99
P-Parts Blitzer Beetle 58122 is a model parts set focused on the driver and cockpit area, bringing together the moulded sections that define the vehicle's interior character and front detail. The black sprue presents the components in one organised frame, ready for trimming, preparation and installation during a repair or rebuild. The visible moulding includes a seated driver torso with arms extended toward the steering position, 2 alternate helmeted head pieces, a separate helmet shell or back piece, 2 oval mirror parts, a steering wheel, rectangular panel sections and a larger body-related panel. This combination supports work on the cabin scene as well as selected exterior details that sit close to the windshield area. Because the parts are still fixed to the frame, each section stays easy to sort before cutting and test fitting. The moulded number markers on the sprue also help distinguish individual sections during the build process. This set suits bench work that focuses on replacing missing pieces, refreshing a previously used model or completing a period-correct Blitzer Beetle body layout. On a display build, the driver figure and cockpit parts give the finished vehicle a more complete look when viewed through the front section. Warning! Not suitable for children under 14 years.
Attachment parts
P-Parts P1-16 Figure Exhaust Model Parts Set
319115270€11.29
P-Parts P1-16 Figure Exhaust is a dedicated replacement parts set for 58452, intended for model repair, restoration or completion work where the original figure or exhaust section is missing. The sprue layout keeps the components grouped and clearly molded, which supports accurate identification during bench work and helps maintain the intended configuration of the build. The set is supplied as unassembled white styrene parts, a practical material for trimming, test fitting and surface preparation before paint. Visible molded numbering on the frame marks individual positions, which helps track each piece through the assembly sequence and reduces guesswork when matching parts to the target section. The combination of figure elements and exhaust-related pieces makes this set useful for replacing damaged sections or refreshing an older build with cleaner detail where wear has affected smaller components. On the workbench, the parts suit careful hobby tasks such as cleanup, dry fitting and finishing alongside an existing 58452 model. For collectors and builders maintaining a specific vehicle, a dedicated replacement set like this keeps repair work focused on the correct section and supports a neater final result than mixed spare parts. Warning! Not suitable for children under 14 years.
Attachment parts
Porsche 956 H Parts Mirror Wing Model Components
319007689€12.39
This H parts set for the Porsche 956 focuses on body details that shape the finished look of the model, with mirror and wing components supplied on a molded runner for clear identification and controlled preparation before assembly. The sprue format keeps the pieces grouped in one frame, so the layout can be checked at a glance before cutting, test fitting and final placement. The frame shown carries multiple molded parts in black and gray, with small index numbers beside the components and TAMIYA lettering molded into the runner. The visible shapes include curved cap-like pieces, bracket-style forms, hexagonal parts and lever-like elements with rounded ends, all presented unassembled on the sprue. This format helps separate delicate detail parts from loose storage and supports careful handling while trimming and fitting each piece to the build. Used during a replacement, restoration or ongoing assembly project, the set suits workbench sessions where missing or damaged exterior details need to be matched back to the Porsche 956 body. The organized runner layout also helps when checking part identity before paint or installation, especially on builds where small finishing components define the final silhouette. Warning! Not suitable for children under 14 years.
Attachment parts
Q Parts Blitzer Beetle model kit body parts
309115052€14.49
Q Parts Blitzer Beetle 58122 brings together key body and trim components for repair, restoration, or completion work on a matching model vehicle build. The set combines a large orange-red body shell section with smaller molded sprues and a separate chrome sprue, creating the visual foundation for the Beetle's rounded front end and bright exterior detailing. The chrome runner carries several reflective parts, including 2 large round lamp housings, 2 smaller circular pieces, a round emblem-style detail and angular mirror-style components with mounting stems. Alongside these, the orange-red runners add thinner bar-like and upright elements that suit mounted exterior details and body finishing. This mix of larger shell parts and smaller trim pieces supports careful replacement of worn sections or completion of an incomplete build while keeping the look of the Blitzer Beetle 58122 consistent across major visible areas. Laid out at the workbench, the parts set gives model builders a clear group of matching components for body restoration or visual refresh work. It also suits projects where original exterior pieces are missing, damaged, or need a cleaner finish before the model returns to shelf display or trackside use. Warning! Not suitable for children under 14 years.
Attachment parts
Q Parts Mirror Chrome Parts Set for Mt.Beetle
319115432€9.49
Q Parts Mirror for the 58618 Mt.Beetle is a model parts set focused on exterior detailing, with chrome-plated molded pieces supplied on a single sprue. The bright plated finish suits visible trim areas where a metallic look matters, and the grouped layout keeps the matching components together while the build or repair is underway. Alongside the chrome sections, the frame also carries dark-tinted transparent inserts, adding a second material and finish to the set. The molded layout shows several distinct part shapes, including round dome-like pieces, circular ring details and tapered components attached to rod-like sections. Numbered markers such as 2, 4, 5 and 6 are molded into the frame to distinguish the individual sections and support part identification during selection. This makes the set useful for replacing missing pieces, refreshing worn exterior details or completing a model with the correct visual elements for this version. On the workbench, the combined chrome and tinted parts help restore the small finishing touches that define the look of the Mt.Beetle. For maintenance, rebuilds or model-specific spares, the set keeps the required exterior detail pieces in one dedicated frame. Warning! Not suitable for children under 14 years.
Attachment parts
Racing Wing Set 2, RC car accessory, carbon pattern
300054688€19.99
The Racing Wing Set 2 adds a carbon pattern rear aero detail to RC car bodies and brings a more focused competition look to the tail section. Two wing designs are supplied, so the rear profile can be matched to the chosen body shape or running setup instead of relying on a single fixed form. Installation is intended for bodies with a flat mounting area measuring 70 mm x 12 mm. The fitting process uses 4 mm mounting holes, and Wing B can be trimmed where required by the marked cut line shown in the fitting guide. The support structure uses parts J1 and J2, with O-rings and snap pins holding the assembly in place under the body shell. Reversing the direction of J1 changes the wing angle, giving a direct way to alter the mounted position through the bracket layout itself. This accessory suits RC car builds that need a more defined rear deck finish or a different wing shape for body tuning. On a painted shell with race markings, the carbon pattern surface adds contrast at the back of the car, while the adjustable mount layout leaves room to test different wing positions during setup.
Attachment parts
Racing Wing Set, RC body accessory, polycarbonate
300053604€18.99
The Racing Wing Set adds adjustable rear aero detail to compatible touring and sports car body shells with 2 straight wing designs in 0.7 mm polycarbonate. One version uses a larger vertical element for high downforce, while the other uses a smaller vertical element for regular downforce, creating a clear choice between 2 rear wing characteristics on the same body. The set also uses ABS wing mounts that can be positioned in 2 ways to change the angle of the horizontal plane. Increasing that angle raises the downforce generated at the rear, which gives a concrete tuning option for circuits that demand more planted handling through faster sections. Scope of delivery: 1x Racing Wing Set with 19 pieces. The included J-Parts wing stay, snap pins and O-rings provide the mounting hardware for installation. Compatibility covers a wide range of chassis including TA05, TA07 PRO, TA08 PRO, TA06, FF-03, TB-05 PRO, TC-01, TRF420, TT-02, TT-02D, TT-02 TYPE-S, TT-02 TYPE-SR, TT-01 TYPE-E and TT-02RR. The wing shapes suit body shells with space available for wing attachment holes, whether the goal is a sharper competition look or a rear setup with more downforce on demanding tracks. Warning! Not suitable for children under 14 years.
Attachment parts
Rally Cockpit 58278, model accessory insert
301825096€9.29
This cockpit insert brings the Rally Cockpit 58278 interior back into view with a single moulded piece that combines 2 seated figures, control areas and cabin structure in one clearly defined layout. The white finish leaves the relief easy to read during test fitting, painting and detail work, while the paired seating arrangement gives the interior a recognisable competition-style character. Raised forms across the part create distinct zones for the seats, side sections and central controls, so the cabin does not rely on a flat floor or empty shell once installed. A large circular steering detail, block-like control elements and support bars are already worked into the moulding, which helps keep the interior consistent across restoration or replacement work. The one-piece format also simplifies alignment inside a compatible model because the main cabin details stay fixed in their intended positions relative to each other. Used in a rebuild, this insert helps return visual substance to a worn or incomplete interior. In a detail-focused project, the moulded surfaces provide a practical base for careful paint application, panel picking and figure finishing, especially when the cabin remains visible through windows or an open body section. Warning! Not suitable for children under 14 years.
Attachment parts
Rubber Bushing, body-fitting spare part, 2-piece
319805385€1.79
This 2-piece rubber bushing set is made for body-fitting parts and gives a direct replacement for a small but important mounting detail. The black rubber shape uses a central opening and a compact ring profile to sit at the fixing point, where a cushioned interface is needed between connected parts. Its simple form makes the function clear: the bushing is placed at the mounting area to support the fit of the body-fitting section while separating hard contact surfaces. That can be useful when an original insert is worn, missing or compressed through repeated use. The tapered inner opening and rounded outer edge shown in the part design suit applications where the fixing point needs a neat seated insert rather than a loose spacer. In regular model maintenance, small replacement parts like this help keep existing assemblies in working order without changing larger sections around them. The 2 matching bushings can be kept in a parts box for repair work or fitted during a refresh of mounting hardware on compatible body-fitting points.
Attachment parts
Scania 56379 Animal Guard, model parts sprue
319115596€35.29
The Scania 56379 Animal Guard parts sprue adds the distinctive protective-bar styling of the full-size truck to a scale model build through black injection-molded components shaped for this specific detail area. Rounded rectangular loops, narrow crosspieces and longer bar sections create the visual structure seen at the front of the vehicle, where these elements frame the bodywork and sharpen the finished look. The sprue format keeps every component connected to the runner until the build reaches this stage, so the individual sections stay grouped and easier to sort before cutting. Molded identification marks such as KK and B2 are present on the frame and help distinguish this parts tree from other sections in a larger build. The mix of curved surrounds, straight lengths and bracket-like pieces points to a detail set that is focused on trim and guard geometry rather than mechanical assemblies. This set suits replacement work on an existing build, completion of an unfinished kit or careful restoration of worn exterior details. On the workbench, the black finish gives a clear view of each contour while trimming, test fitting and aligning the guard structure with the surrounding body sections. Warning! Not suitable for children under 14 years.
Attachment parts
Scania 56379 F Parts, model kit spare parts
319007737€33.49
This spare-parts sprue for Scania 56379 focuses on F Parts, including the sun visor and side skirt sections named in the data. The white injection-moulded frame keeps the individual pieces organised until separation, making it easier to identify each section before trimming and placement on the build. The layout shown on the runner combines curved outer pieces, long narrow structural elements and box-shaped components with moulded openings, all formed as matching parts for this specific designation. That matters during repair work as much as during an interrupted build, because a dedicated parts tree avoids substituting shapes that do not belong to the same version. The moulded format also supports common model-making steps such as dry fitting, surface preparation and paint planning once the parts are removed from the sprue. On the bench, this set suits replacement work on a partly finished truck model or completion of a build that is missing its original F runner. It also gives collectors and builders a direct route to the named Scania 56379 exterior sections without opening a full new kit. Warning! Not suitable for children under 14 years.
Attachment parts
Scania 56379 H Parts, model spare parts set
319007739€19.89
Scania 56379 H Parts are model spare parts for repair, restoration and replacement work on the matching build. The set is supplied as a white molded sprue with multiple unassembled components attached to one frame, including bumper sections, wheel arch pieces and smaller support elements that can be prepared as needed for the relevant assembly stage. The parts frame shown in the data groups larger curved sections with longer side pieces and additional smaller elements, which helps keep related exterior components together before removal from the sprue. This format supports controlled preparation when replacing worn or missing sections on an existing model. The molded layout also makes it easier to compare shapes, mounting points and part positions while planning a repair step or completing an unfinished build. As spare parts rather than a full kit, these components focus on specific body-area replacement work. On the workbench, the set suits careful restoration of a Scania model with attention on the bumper and wheel arch area. It also fits projects where an existing build needs matching replacement pieces kept together on one molded frame until the required parts are selected and prepared. Warning! Not suitable for children under 14 years.
Attachment parts
Scania 56379, mesh animal guard, model parts
319115597€14.49
These mesh animal guard parts for Scania 56379 bring a purposeful commercial-truck look to a model build through multiple lattice-pattern panels on a single black sprue. The diamond mesh texture and the mix of rectangular and curved shapes give the builder several matching elements to place around the front and side areas of the bodywork. The set is presented as unassembled model parts, with each section attached to the runner frame for clean identification before clipping and fitting. Several panel sizes are visible, including broader guard sections and smaller matching pieces that extend the same visual theme across more than one mounting point. The black moulding provides a neutral base for finishing work and helps the mesh pattern stand out clearly during test fitting, painting and final placement. As an accessory set, the focus stays on exterior detail and scale appearance rather than mechanical changes. In a truck model project, these parts suit builders who want to sharpen the look of a Scania 56379 with protective grille styling and extra body detail. The mesh structure reads clearly at close range, making it useful for display builds where surface texture and added trim help define the finished vehicle. Warning! Not suitable for children under 14 years.
Attachment parts
Scania 56379, model parts set, Lightbox
310110009€27.49
This Lightbox parts set for Scania 56379 concentrates on one clearly defined component group and keeps the build focused on the exact section that needs replacement or completion. The grey injection-moulded frame presents the pieces unassembled on a single sprue, so each part stays organised and easy to identify before trimming and fitting. The visible layout includes 2 long rectangular panel pieces, 2 small circular connector-like parts carried on short bars, and 2 small rectangular plates with an oval slot and round holes. That combination makes this set useful when an existing Scania 56379 build needs the matching Lightbox section rather than a full new kit. As a model supplies entry, it suits repair work, restoration of an older build, or a planned parts swap using the exact designation named in the data. The moulded format also allows careful preparation of edges and attachment points before the pieces are installed. On the workbench, the grouped sprue layout helps keep the individual sections together during sorting and test fitting. In an ongoing truck model project, the set supports precise replacement of the relevant assembly area while leaving the rest of the build unchanged. Warning! Not suitable for children under 14 years.
Attachment parts
Scania Air Horn Parts, model accessory sprue
319007740€25.49
HH Parts Truck Air Horn Scania 56379 adds a distinct exterior detail set to a scale truck build with chrome-colored molded parts arranged on a single sprue. The frame layout keeps the individual components clearly separated, so the horn shapes and smaller fittings can be identified before removal and placement on the model. The sprue shows multiple part forms, including 2 cone-shaped horn pieces, small block elements, elongated rod-like parts and a cross-shaped connector piece. Number markings on the runner help distinguish positions on the frame during preparation. The chrome finish gives these parts a bright metallic look suited to visible trim areas on a truck model, where small add-on details change the overall appearance of the cab and roofline. As a dedicated accessory set rather than a full vehicle kit, it focuses on finishing detail and visual accuracy for a Scania-themed build. On the workbench, the compact sprue format keeps the parts together until the fitting stage and supports an orderly painting and assembly sequence where required by the build. Once installed, the air horn components create a more defined upper-body truck silhouette and add a clear custom-detail accent to display-focused model projects. Warning! Not suitable for children under 14 years.
Attachment parts
Scania Clear Lamp Bracket Parts, Model Kit Spares
319007741€10.19
These clear lamp bracket parts for Scania model builds focus on one of the details that gives a truck model its finished look. The set comes as transparent gray injection-molded pieces attached to a sprue, so each section stays organized until trimming and fitting begin at the workbench. The runner carries multiple small structural parts, including long narrow bars, perforated sections and connector elements that support careful replacement or completion of lamp bracket areas on a compatible build. Keeping the parts on the frame before use helps with part handling and visual checking during a repair or ongoing assembly. The transparent gray material is especially suited to light-related details, where clean edges and consistent molding matter once the parts are installed. This makes the set useful both for restoring a previously built truck and for finishing a model that needs the correct bracket components. On a Scania project with missing or damaged details, the set supports a neater rebuild of the lighting area without changing the character of the original model. It also fits naturally into a spare-parts drawer for future maintenance, touch-ups or planned detail work on compatible truck assemblies. Warning! Not suitable for children under 14 years.
Attachment parts
Scania Fender Antenna Parts, model accessory set
319225257€16.19
This Scania parts set focuses on exterior detailing with molded fender and antenna components arranged on a black sprue for clean identification before removal. The layout brings together larger curved sections, a long narrow bar-shaped piece and several smaller fittings that suit scale truck bodywork where wheel coverage, trim and mounted details shape the finished look. The sprue format keeps each piece connected until the build reaches the fitting stage, which helps when comparing mirrored parts and planning placement across the model. Two large curved sections appear alongside bracketed elements, cover-like housings, a rectangular plate and several compact connector-style parts, giving the set a broad mix of shapes for visible exterior areas. Because the parts arrive unassembled, builders can trim, prepare and position each section to match the needs of the project. The black finish also suits body and chassis areas where darker mounted details blend naturally into the overall truck appearance. This accessory set fits naturally into repair work, replacement tasks and detail-focused upgrades on a Scania model project. It can be used when refreshing worn exterior sections, completing a truck build that needs matching fender hardware, or adding antenna detail that sharpens the final presentation on shelf or trackside scenes. Warning! Not suitable for children under 14 years.
Attachment parts
Scania Fuel Tank Q Parts, model accessory set
319115599€29.49
This Q Parts set provides left and right fuel tank components for a Scania model build and adds the side-mounted equipment that gives a truck chassis its finished working look. The black molded sprue groups the main cylindrical tank sections, smaller round connection points and bracket-style pieces in one clearly arranged frame for preparation at the bench. Beyond the tank bodies themselves, the runner also shows matching support parts that help carry the visual structure of a heavy vehicle's side equipment. The cylindrical forms, end caps and mounting elements create a more complete silhouette along the lower sides of the model. Because the parts are supplied unassembled on the sprue, each section can be removed, cleaned and fitted as the build requires. This makes the set useful when replacing missing pieces, restoring a previous build or adding detail to a truck project that needs the Scania tank layout. On the work surface, the grouped arrangement helps keep small fittings together while the larger tank sections remain easy to identify. Once fitted to the model, the assembled parts strengthen the mechanical character of the vehicle with the distinct look of side tanks and attached hardware. Warning! Not suitable for children under 14 years.
Attachment parts
Scania Light Bar Mount, Model Parts Set
319115598€13.59
This model parts set is made for the light bar mount area of the Scania 56379 and brings focused detail to a specific section of a scale truck build. The black sprue frame holds multiple molded components in one organized layout, giving each piece a clear place before removal and assembly at the bench. Visible on the runner are long ribbed sections, curved mounting forms, linked cylindrical connectors, drilled bracket pieces and block-shaped support parts. Molded part numbers such as 10, 8, 4 and 2 are integrated into the frame, helping builders identify the correct components during each assembly step. The arrangement on the sprue supports careful preparation, since the parts remain grouped until they are cut free and cleaned for fitting. As a dedicated accessory set, the focus stays on the structure that supports the light bar rather than on a full vehicle assembly. On the work surface, these components suit builders refining a Scania truck model with more specific exterior hardware. The set also fits finishing sessions where accurate placement, clean alignment and consistent scale detail matter across the mounted light bar area. Warning! Not suitable for children under 14 years.
Attachment parts
Scania Marker Lights, model accessory parts
319007736€21.39
These DD Parts marker lights for Scania model builds add a focused exterior detail that sharpens the look of a compatible truck project. The set is supplied as separate black molded components on a sprue, giving builders clearly defined parts to remove, prepare and fit during the finishing stage of an assembly. The molded layout keeps the small light elements grouped in one frame before use, which helps when planning paint and placement across the bodywork. As a detail-oriented accessory set rather than a full structural conversion, these parts concentrate on visible trim areas that can change the character of a truck model with relatively little space required. The black finish provides a neutral base for further treatment where the build calls for painted or customized lighting details. This kind of parts set fits naturally into restoration work, replacement of missing pieces, or a visual refresh on an existing Scania model. It also suits builders who want to refine a display vehicle with extra exterior accents after the main chassis and body sections are complete. Batteries are not included. Warning! Not suitable for children under 14 years.
Attachment parts
Scania R470 H-Parts, model spare parts sprue
300004519€23.99
Scania R470 H-Parts bring the correct exterior sections back into a truck model build with a dedicated spare parts sprue for set 56318. The set centers on front bumper and side panel components, giving model work a direct route to replace worn, damaged or missing molded sections with matching shapes. The scope of supply contains 1 sprue with the H parts grouped together for organized handling at the workbench. The parts are injection molded in white and remain attached to the runners until removal, which helps keep each section identifiable during trimming and dry fitting. Recessed lines, mounting openings and the molded contours visible on the sprue support accurate placement within the intended assembly. As a spare parts set rather than a full kit, this pack focuses on the specific body areas named in the data. This format suits repair work, restoration of an earlier build, or completion of a model that needs the original bumper and side panel sections for a consistent finish. On the bench, the single sprue layout keeps the relevant pieces together while planning the next assembly steps and checking fit against the existing build. Warning! Not suitable for children under 14 years.
Attachment parts
Scania R620 H-Parts Bumper, model spare parts
300004893€26.99
This H-Parts bumper set for the Scania R620 focuses on replacement body sections that restore the front-end look and structural detailing of the truck model. The white molded components arrive attached to sprue frames, with visible panel lines, mounting holes and shaped openings that define each section before trimming and fitting begin. The set presents several distinct body elements rather than loose offcuts, which helps keep the parts organized during preparation. A large grille-style section, rectangular side panels and a curved main body piece create a clear basis for repair or rebuild work on an existing Scania R620 model. The molded cutouts and attachment points give each section a specific role in the assembly, which supports accurate placement during fitting. The white finish also provides a neutral base for surface preparation and later painting to match the rest of the build. On the workbench, this set suits modelers replacing damaged bumper parts, refreshing an older truck build or preparing a cleaner body shell for a new finish. It also fits projects where original sections are missing and the front bodywork needs matching shapes and mounting geometry to bring the model back into complete form.
Attachment parts
Scania Rear Fender Y Parts, model spare parts
319225258€18.49
These Y Parts Rear Fender Scania 56379 components support detailed repair and replacement work on a Scania model build. The set appears as a single white molded sprue with multiple unassembled pieces attached to runners, keeping the parts grouped and easy to identify before cutting and cleanup. Large curved panels, ribbed curved sections, flat mounting plates with round holes, a frame-like base section and smaller bracket-style pieces provide the substance needed for rear fender area work. The molded layout suits careful hobby bench preparation, where each section can be removed, trimmed and test fitted in sequence. The white finish gives a neutral base for surface preparation and later paint matching. Because the set centers on body and attachment parts rather than decorative extras, it fits practical restoration tasks as well as detail corrections on an existing build. The visible mix of curved covers and support-style elements helps maintain the intended shape around the rear fender section. On the workbench, these parts suit replacing worn sections, correcting damage or refreshing a build that needs cleaner exterior panels. They also support ongoing custom projects where matching fender pieces and mounting elements need to be kept together during assembly and finishing. Warning! Not suitable for children under 14 years.
Attachment parts
Scania Running Board Chrome Parts, model accessory
319007738€17.79
These chrome-finish running board parts are made for the Scania 56379 build and focus on the step, platform and trim areas that shape the truck's side detail. The silver sprue presents the components as injection-molded pieces with numbered attachment points, making it easier to identify each section before cutting and fitting it into place. Several parts show molded tread and diamond-plate textures, including rectangular grip panels and larger platform sections that give the assembled model a more technical surface finish. Curved pieces and narrow trim-like elements expand the detailing options around the board area instead of limiting the build to flat panels alone. Because the parts remain on the frame before use, sorting and preparation stay clear during the assembly stage. This format also suits careful replacement work when an existing Scania 56379 build needs a fresh exterior section. On the workbench, the set supports focused detailing sessions around steps, side platforms and visible trim zones. It also fits restoration tasks where worn or missing board sections need to be matched with the correct molded shapes for the Scania 56379 model. Warning! Not suitable for children under 14 years.
Attachment parts
Surf Board Toyota Hilux 58397 model accessory
309335489€9.69
This Surf Board for Toyota Hilux 58397 adds a clear scale cue to the finished model with a long, streamlined board shape that suits beach, coastal and leisure-themed vehicle scenes. The white surface and subtle woodgrain-style pattern give the accessory a cleaner, more finished appearance than a plain untextured insert, while the pointed nose and rounded tail keep the silhouette close to a classic longboard profile. The underside shows small mounting pegs that indicate dedicated placement on the matching Toyota Hilux 58397 setup. That makes the board more than a loose decoration: it is a model accessory shaped to sit as part of the vehicle presentation. The slim form keeps the visual focus on the pickup while adding a strong lifestyle detail that changes how the completed build reads on a shelf or in a diorama. The smooth finish also works well with custom paint and weathering approaches where a builder wants to tune the final look to the rest of the body. Mounted on the matching Hilux model, the board helps create a more specific scene, whether the vehicle is shown as a beach cruiser, a weekend transport setup or part of a larger display with terrain and figures. It also gives the finished build an extra focal point in side views and roofline shots. Warning! Not suitable for children under 14 years.
Attachment parts
T3-01/WR-02 Multipurpose Driver Figure Kit
300054864€9.99
The T3-01/WR-02 Multipurpose Driver Figure adds a configurable cockpit or rider presence to compatible chassis builds with a figure that can be assembled in more than one style. Visor and chin guard parts change the helmet from a standard type to a motocross-style version, creating a different look for car or bike layouts on the same basic figure. The build is designed around model-specific posing details rather than a fixed display stance. Hand parts rotate to match either the included steering wheel or the included handlebar, so the arm position can follow the control setup used on the chassis. The sticker sheet expands the finishing options with 4 eye designs and a pair of sunglasses for the face area. It also provides analog instrumentation for motorbike models, digital displays for car and bike models, and additional generic graphics for extra detailing. Screws and small attachment parts are included for fitting the assembled figure to the model. This figure suits builders working on T3-01, WR-02 and GF-01 chassis machines who want the driver area to match the character of the vehicle. Paints are required separately for finishing, and compatibility excludes WR-02G and Heavy Dump Truck models.
Attachment parts
TA-05V2/TB Evo. B-Parts Body Mount Spare Set
300051253€15.99
The TA-05V2/TB Evo. B-Parts Body Mount spare set supplies the designated body mount section for a wide range of Tamiya on-road chassis. With 14 pieces in the pack, it supports targeted replacement work when the original mounting area needs fresh parts to restore the intended chassis setup. This set is listed for FF-04 EVO Chassis, TA07 PRO Chassis, TA06 MS Chassis, TA06 Chassis, TA06 PRO Chassis, TA05 ver.II Chassis, TB-Evo.7 Chassis, TB-Evo.6 MS Chassis, TB-Evo.6 Chassis, TB-05 PRO-Chassis, TB-04-Chassis, TB-04 PRO-Chassis, TB-03-Chassis, TB-03 VDS-Chassis, TRF419XR-Chassis, TRF419X-Chassis and TRF419. The grouped B parts format helps keep ordering precise, because the required section is identified by the same letter designation used for the chassis parts tree. Black moulded pieces and included fasteners suit workshop stock, routine servicing and rebuilds after wear or damage. On a bench setup, the set supports planned maintenance before the next run and helps return a compatible chassis to its intended body mounting arrangement. It also fits neatly into a spares collection for racers and builders who keep specific chassis families in regular rotation. Warning! Not suitable for children under 14 years.
Attachment parts
Touring Car Body Acc. Parts, RC fittings set
300054139€27.99
This 1:10 touring car accessory set brings extra scale character to an RC body shell with mirrors, front and rear windshield wipers, mockup exhaust parts, an intercooler and brake rotor details. The 54-piece contents are designed to sharpen the visual finish of a touring car body, giving the shell more of the cues seen on full-size road and race machines. The set supports several mounting and fitment situations shown in the instructions. Mirror parts are installed through 4 mm holes, while the wipers use 2 mm holes and allow the appropriate pair to be chosen for the curvature of the window surface. The intercooler detail mounts at the front and is intended to sit visibly behind a cut-out or unpainted bumper opening. For the rear section, the muffler uses one of 3 attachment parts to suit the body angle. The assembly also includes screws, washers, lock nuts, snap pins, O-rings and black double-sided tape for installation. Brake rotor hub parts are specified for Medium Narrow Wheels with 24 mm width, which keeps the disc detail aligned with the wheel format named for the set. The instructions also note compatibility examples for TT-01 and TB-03 chassis layouts when fitting the intercooler detail. A separately available 5 mm LED can be installed in the muffler section on suitable builds, adding another scale accent to the finished car. Warning! Not suitable for children under 14 years.
Attachment parts
Touring Car Cockpit-Set RHD 1/10 Accessory
300054157€26.49
This 1:10 Touring Car Cockpit-Set RHD adds a right-hand drive interior to compatible touring car bodies and gives the finished model a more authentic full-cabin look. The main cockpit insert is paired with a driver figure and separate helmet, creating visible structure beneath the windows instead of an empty shell. The set is designed for many 1:10 Tamiya models and uses a urethane foam adapter to help the insert sit inside numerous body shapes. A sticker sheet supplies dashboard and panel graphics that bring extra definition to the interior surfaces, while the mounting material supports installation of the 6-piece set. The right-hand drive layout makes it especially suitable where the body style calls for that configuration, and the added cabin detail changes how the model reads both on the bench and on the track. Used in a touring car build, the cockpit insert gives painted body shells more depth when viewed from the side windows and windscreen. It also suits refresh projects where an existing 1:10 shell needs a more complete interior finish without changing the outer body style. Warning! Not suitable for children under 14 years.
Attachment parts
Touring Car Racing Wing Set, RC body accessory
300054494€13.89
The Touring Car Racing Wing Set brings 2 rear wing styles into one RC body upgrade, with a curved wing and a straight wing molded in 0.7 mm polycarbonate. Mounted on the rear of a touring or sports car bodyshell, the wing changes the visual profile and adds a tuning option for circuits that call for more rear downforce. The set includes J Parts for the wing stay, and the mounting layout is designed for bodies with a flat rear area measuring 70 mm x 12 mm. Installation uses 4 mm holes in the wing and 4 mm holes in the body, with the wing secured using snap pins and O-rings. By reversing the direction of the J1 stay, the wing angle can be changed, giving a simple way to alter the rear aero setting. The wings are supplied clear, with protective film to remove before masking and painting from the underside. This accessory suits shell preparation sessions where body details are being finished before track use, and it also supports setup changes between different racing surfaces or layouts. Snap pins and O-rings are necessary for attachment.
Attachment parts
Touring Car Rear Spoiler Carbon Design Set
300053470€18.99
This touring car rear spoiler set adds a focused racing detail to compatible RC body builds with a carbon design finish and a clean, curved wing shape. The set contains 1 rear spoiler and 1 J-parts tree, giving bodywork projects the main aero piece and matching mounting components in one pack. The spoiler is intended for use with a broad range of chassis platforms named in the data, including TA07 PRO, TA08 PRO, TA06, FF-03, TB-04, TB-05 PRO, TRF419, TRF420, TT-02, TT-02D, TT-02RR and TT-01 TYPE-E. The listed body references include 51245, 51246, 51257, 51258, 51306, 51322, 51340, 51359, 51372, 51373, 51375, 51376, 51407, 51428, 51494, 51517, 51519, 51526, 51534, 51561, 51563, 51575, 51584, 51585, 51590 and 51592. The image also shows separate fasteners alongside the main wing and parts tree, matching the set's role as a body accessory for fitting or replacement work. On a finished shell, the carbon design wing sharpens the touring car silhouette and pairs well with track-focused body styling. It suits workshop sessions that involve replacing worn body parts, updating a shell with fresh details or preparing a compatible chassis build with a more defined rear body section. Warning! Not suitable for children under 14 years.
Attachment parts
VW Beetle H & J Parts, model spare parts set
309005486€19.99
This H & J parts set is made for the VW Beetle 58383 and focuses on the detail sections that shape the finished look of the model. Chrome-colored molded pieces give the body bright trim accents, with visible components that appear to cover exterior fittings such as grille-style sections, round light surrounds and other small finishing parts. As a dedicated spare parts set, it serves a different role from a full assembly kit. The parts are intended for replacement, repair or restoration work on an existing VW Beetle 58383, which helps when a build needs the correct section rather than a substitute. The image shows several pieces still attached to sprues, a practical format for identifying individual sections before removal and fitting. Smaller formed details can be handled in sequence, which supports careful placement on visible areas of the model. On the bench, this set fits neatly into repair work, partial rebuilds or the completion of an older project. It also suits builders who keep specific replacement sections on hand for future maintenance of the VW Beetle 58383. Batteries are not included. Warning! Not suitable for children under 14 years.
Attachment parts
VW Golf II GTI/Rally, model parts, H bumper
319007434€9.19
This H parts set for the VW Golf II GTI/Rally focuses on exterior detailing with black bumper components that help restore the correct look of the body shell or complete a fresh build with matching trim. The sprue layout keeps each section connected before cutting, making it easier to identify the required pieces at the workbench and prepare them for fitting. Alongside the bumper elements, the frame also carries smaller exterior parts that support a more complete finish. Mirror-style pieces, round lamp-style housings and compact mounting arms add further body details drawn from the same moulded set. The black material suits builds that need dark trim straight from the frame, while the attached layout helps with part handling before cleanup and installation. For repair projects, the set can replace missing or damaged exterior sections without changing the rest of the body configuration. On the bench, these parts fit naturally into body restoration, detail correction or a careful rework of an existing shell. They also suit a stored kit that needs fresh trim parts before painting, final assembly or display in completed form.
Attachment parts
Windshield Parts, clear model accessory sprue
319115330€9.99
This accessory sprue centres on clear windshield parts for a scale model build and brings the transparent body section together with matching small exterior details in one moulded set. The smoke-tinted clear material gives the screen area a defined look, while the curved shapes follow the flowing lines visible in the formed parts. The runner holds a large main panel alongside smaller round, oval and connector-style pieces that appear intended for finishing work around the outer body. Because the parts are supplied unassembled on the sprue, each section stays separated and easy to identify before cutting, test fitting and final installation. The moulded contours help maintain consistent shaping across the transparent sections, which matters when a build relies on clean alignment around canopy, fairing or windshield areas. This makes the set useful when replacing worn glazing parts or completing a body that needs its clear sections and related trim. On the workbench, the sprue format supports a measured build sequence: trim the required section, clean the attachment points and fit each piece where the body shell calls for it. The combination of a main clear panel and smaller matching details suits hobby sessions focused on finishing, restoration or careful visual customisation of a model vehicle. Warning! Not suitable for children under 14 years.
Attachment parts
WR-02 Driver Full Body Kit, plastic assembly figure
300054496€9.69
The WR-02 Driver Full Body Kit adds a complete seated driver figure to WR-02 based vehicle builds, bringing helmeted character detail into the cockpit instead of leaving the interior empty. Supplied as a plastic assembly figure, the set focuses on the driver itself, with full body parts that build into 1 figure sized for this chassis family. The parts layout supports a straightforward figure build with separate body sections and mounting pieces for installation. Helmet components are included, allowing the finished figure to carry the covered racing look shown in the kit design. The set also contains the parts necessary for attachment, so the assembled driver can be fixed into place rather than adapted from unrelated figure parts. Because the figure is supplied unassembled, builders can paint and finish the surfaces before final installation to match the chosen vehicle scheme. The molded form is based on the popular driver figure from the Wild Willy 2 R/C car kit. Mounted in a WR-02 chassis, the figure gives the cockpit a more complete scale appearance during shelf display or running sessions. The same parts can also be modified for custom creations when a project calls for a seated driver figure with helmet and vehicle-focused styling.
Attachment parts
WR-02 Driver Torso, RC figure accessory
300054531€7.69
The WR-02 Driver Torso brings a driver presence to compatible RC builds and adds a clear cockpit focal point to WR-02 chassis machines. White moulded parts on a sprue, a separate steering wheel and small metal fasteners create a compact accessory set that supports a detailed, hands-on installation. This accessory is intended for builders who want to personalise a vehicle beyond the body shell alone. The supplied torso figure can be adapted with a little fitting ingenuity, and the data states that only minor modification is needed for attachment to WR-02 chassis machines. The included hardware consists of screws, nuts and a washer, which supports secure mounting during assembly. The steering wheel expands the driving theme and helps the finished interior read as an active driving position rather than a simple empty seat area. The WR-02 Driver Torso suits custom garage sessions, body-off detailing work and refresh projects on existing WR-02 models. It can be used to add character to compatible machines such as the Volkswagen Type 2 and the Suzuki Jimny Wheelie where a visible driver detail strengthens the finished scale impression.
Attachment parts
WT-01 E-Parts Body Support, spare parts set
300005714€12.79
WT-01 E-Parts Body Support is a replacement spare parts set for selected Tamiya RC models, covering references 58231, 57825 and 58514. The pack contains 1x E-Parts with 11 pieces, supplied on a molded sprue so the individual sections stay grouped until the required part is removed for fitting. This set is intended for the body support area, making it useful when worn, damaged or missing original parts need to be exchanged on a compatible chassis. The molded components are formed as E-Parts, a common format for keeping related small sections together in one frame before installation. That layout helps with part identification during repair work and reduces the chance of mixing separate small pieces before assembly. In a workshop setting, the set supports routine maintenance, restoration of an older build, or preparation of a used model for running again. It also suits keeping a matching replacement frame on hand for compatible WT-01 based vehicles, especially when the body mounting section needs the correct original-style parts rather than a universal substitute. Warning! Not suitable for children under 14 years.
Attachment parts
Z-Parts Z1-Z3, model spare parts sprue
300225055€4.49
Z-Parts Z1-Z3 is a model spare parts sprue for replacement, repair and ongoing build work. The set is supplied as white molded components attached to a runner, giving a clear overview of each section before removal and helping keep small pieces together on the workbench during preparation. Rounded shell pieces, a circular ring part and smaller connector-style elements provide the core shapes shown for this set. The attached sprue format supports careful planning before cutting, sanding and fitting begin. Each molded section can be checked for position and orientation while still on the runner, which helps when a build needs one specific replacement area rather than a full set of new parts. The white finish also makes edges, openings and seam lines easier to read during test fitting and cleanup. This makes the set useful for restoring worn sections, replacing damaged pieces or completing an unfinished model with matching parts from the designated Z1-Z3 group. On the bench, this spare parts sprue fits naturally into repair sessions, parts sorting and staged assembly work. It gives model builders a direct way to replace selected molded sections while keeping the rest of a project unchanged, whether the goal is a clean rebuild or a precise parts swap. Warning! Not suitable for children under 14 years.
Attachment parts
Aluminum Wing Washers Blue, RC accessory
300054849€13.99
These 14 mm aluminum wing washers are made to support polycarbonate racing wings on R/C cars with a broader contact area at the mounting point. Compared with the standard attachment method stated in the data, the washers help the wing work more effectively while adding a neat blue anodized finish to the rear aero hardware. The set contains 2 aluminum wing washers and 2 titanium screws in 3 x 8 mm size. That combination gives the mounting point a light metal hardware setup, with titanium screws matched to the washers for compact fastening. The washers are also described as adding protection during crashes and rolls, where the wider aluminum pieces help back up the wing around the fixing holes. Use is specified with aluminum adjustable wing stays, with compatibility named for Item 54510 and 54773. On an R/C car prepared for track running, the pair suits rear wing tuning where stable mounting and clean hardware matter. They also fit rebuilds after race wear, when fresh washers and screws can restore the wing fixing points on a compatible setup.
Attachment parts
K-/H-Parts Fitting.M-B G-ClassG500, model parts
319803213€14.19
K-/H-Parts Fitting.M-B G-ClassG500 is listed as a model parts set in the Models & Accessories range and is linked in the data to 58675. That combination gives a concrete reference for matching parts to a specific build rather than searching across unrelated components. The short designation points to fitting parts for the M-B G-ClassG500, making this set relevant where an existing model needs the correct associated components. Within a workshop setup, model parts like these support replacement work, completion of unfinished assemblies, or restoration of a used build with the intended matching set. The category placement under Models Supplies identifies it as an accessory or spare-parts purchase rather than a full vehicle kit. No battery, runtime, speed, voltage or dimension details are stated for this set, so the focus stays on the named fitment reference and its role in model maintenance. On the bench, this kind of parts set helps keep a referenced model project moving when original components are missing, worn or due for replacement. It also suits stock planning for hobby spaces that keep specific fitting parts ready for service work on the 58675-linked build. Warning! Not suitable for children under 14 years.
Attachment parts
K Parts for 58064, clear model parts set
300115059soon available again
K Parts for 58064 provides a focused replacement set for restoring clear details on the matching model, with 4 transparent moulded pieces supplied on one sprue. The layout shown in the set combines 2 rectangular inserts and 2 round inserts, making it suited to builds that need the original clear shapes back in place. The parts are formed in transparent polystyrene, and the moulded lines and internal detailing remain visible through the clear finish. That matters when a model relies on crisp transparent sections to complete its look, because the shaped surfaces and tabs are already built into each piece. The set is identified in the supplied data as K Parts for 58064, so the fit and form are tied to that specific designation rather than to a general-purpose assortment. Included: 1x K-Parts with 4 parts. This kind of replacement set fits naturally into restoration work, rebuilds of older models, or repairs after wear to the original clear sections. It can also support a cleaner final result when a build calls for fresh transparent components with the correct moulded geometry instead of reused parts with scratches or clouding. Warning! Not suitable for children under 14 years.
Attachment parts
K-Parts Roll Bar, model accessory for 58372
309115167soon available again
This K-Parts roll bar set is made for 58372 and provides the matching model accessory for repairs, replacement work or a faithful rebuild. The set contains 1 K-parts frame with 9 parts, giving the build a dedicated group of shaped components rather than a generic hardware mix. Chrome-plated surfaces create a metallic look that suits exposed exterior details and helps the finished model read clearly at a glance. The parts frame groups the components in one connected sprue, which helps keep small pieces organised until they are removed for fitting. The visible layout includes long bent bar sections, smaller brackets and compact detail elements, all formed as model-specific pieces for 58372. This makes the set useful when an original section needs replacing or when a stored build is being brought back to complete condition. The plated finish also supports visual continuity where bright trim or exposed barwork is part of the model's appearance. On the bench, the set fits naturally into restoration work, spare-parts storage or a careful rebuild of 58372. It also suits builders who want the correct K-Parts frame on hand before starting maintenance or detail replacement on the model. Warning! Not suitable for children under 14 years.
Attachment parts
M-AMG GT3 EVO H Parts, model accessory set
319007772soon available again
The M-AMG GT3 EVO H Parts set supplies spoiler and mirror components for model work that calls for the correct exterior finishing pieces. These parts support repair, restoration and detail completion on a matching body shell, helping the finished build retain the intended GT3 silhouette. The spoiler and mirror pieces concentrate on visible body details rather than mechanical assemblies, which makes this set especially useful when small exterior components need replacement after handling, transport or rebuild work. As a dedicated accessory set, it fits naturally into ongoing bench tasks where a body shell is being refreshed or completed with the proper trim elements. The designation H Parts identifies this pack as a specific grouped parts section within the model range, giving builders a direct route to the needed exterior components. On the workbench, the set suits careful rebuilds, body restoration and finishing passes where missing mirrors or a damaged rear wing would leave the shell incomplete. It also supports spare-parts storage for future maintenance on an M-AMG GT3 EVO model, keeping key exterior details ready for later replacement. Warning! Not suitable for children under 14 years.
Attachment parts
Mirror/Rear Wing EVOII, model parts, green
319005378soon available again
Mirror/Rear Wing EVOII in green is a set of molded model parts for detailed vehicle assembly, repair or restoration work. The green finish provides a ready color base for builders matching existing body sections, while the shaped exterior pieces support a consistent look across the completed model. The parts are supplied on a sprue, which keeps each section connected and easy to identify before trimming and fitting. Visible component types include mirror elements, rear wing sections and additional exterior pieces that work as body-mounted details rather than as a complete standalone kit. The molded format suits careful preparation with cutting, cleanup and test placement before final attachment. For custom builds, the green molded color can also serve as a starting point for further painting and surface finishing where the project calls for added detailing. On the workbench, these parts fit naturally into restoration tasks, replacement of damaged exterior sections or selective upgrades to an existing build. The set also supports spare-parts storage for hobby benches where matching trim and body details are kept ready for future maintenance.
Attachment parts
TRF201/511/DB-01 Rear Wing-Set, RC spare part
300054211soon available again
The TRF201/511/DB-01 Rear Wing-Set brings 2 rear aero options into one pack, with 1 Rounded/Wide wing and 1 Straight/Narrow wing for chassis tuning on compatible RC buggies. Each wing uses an adjustable downforce cut line, so the aero surface can be trimmed to alter how the rear end responds on different layouts. This set is supplied as a 2-piece rear spoiler set and is intended for use as a spare or setup part rather than a decorative add-on. The Rounded/Wide shape offers one rear wing profile, while the Straight/Narrow shape provides a second profile with a different outline for comparative setup work. Compatibility in the data covers TRF201 chassis, TD4 chassis, TD2 chassis, DB02 chassis, DN-01 chassis, TRF503 chassis, TRF502X chassis, TRF211XM chassis, TRF201XMW chassis, plus use with TRF201, DB01 and TRF511 machines. On a practice day or between race heats, the 2 wing forms support direct back-to-back testing on the same buggy. The built-in cut lines also make it easier to prepare a wing for track-specific tuning when surface grip or corner balance calls for a change at the rear. Warning! Not suitable for children under 14 years.
Attachment parts
Window Clod Buster 58065, spare body window
309335040soon available again
This spare window for the Clod Buster 58065 restores a distinctive body detail with its translucent smoky-brown finish and moulded shape. The curved front face, angled side walls and formed top section give the part the contour needed for the matching body area, so a repair or restoration can keep the model's original character intact. The moulding is formed as a dedicated replacement component rather than a generic sheet insert. A large circular cutout sits in the top section, alongside a recessed rectangular area and 2 raised cylindrical mounting posts with holes. Those built-in features matter during installation because the part already carries the openings and fixing points required by its design, instead of needing a flat panel to be cut to shape. The glossy tinted surface also matches the visual style shown for this Clod Buster window part. Used as a replacement during maintenance, rebuilds or body refurbishment, this component suits projects where the original glazing has been lost, cracked or heavily marked. It also works as a practical spare for parts storage when keeping an older Clod Buster 58065 ready for future repairs. Warning! Not suitable for children under 14 years.
Attachment parts
Window Net 100x120mm, model accessory, BB-01
314615002soon available again
This Window Net sheet brings a crisp grid texture to scale detailing with a 100 x 120 mm format that can be adapted to a range of body openings and interior layouts. The dark mesh appearance and evenly spaced square pattern create the look of a fitted screen, making it useful wherever a build calls for visible structure rather than a solid panel. The sheet is supplied as 1 piece and is identified for BB-01 reference use. Its flat form gives a clear base for marking, trimming and test fitting before final placement. The regular opening pattern helps keep cut lines visually consistent across left and right sections, and the mesh texture can be used to suggest cockpit netting, side screening or other scale barrier details where the underlying body shape remains visible. The square grid also works well in areas that benefit from a technical, motorsport-inspired finish. On the bench, the 100 x 120 mm size supports careful measuring against body contours, apertures and panel edges. In a completed model, the fitted mesh adds depth and contrast to openings that would otherwise read as plain cutouts, giving custom bodywork a more defined scale character. Warning! Not suitable for children under 14 years.
Attachment parts
5x26mm Alum. Tube Body Mount, model accessory
319804569available in stores
This black aluminum tube body mount brings a precise 5 x 26 mm format to model building and maintenance tasks where fit matters. The defined diameter and length make it a focused choice for builders who need a clearly specified mounting part rather than a generic workshop substitute. The aluminum construction gives the part a clean, technical finish suited to visible mounting areas, while the black color blends neatly into many body setups. Its compact format helps when sorting spares, planning a rebuild, or replacing a worn mounting component with the same stated dimensions. Because the data identifies this as a tube body mount, the part can be matched by function as well as by size during workshop preparation. The stated measurements also make it easier to compare against existing hardware before installation. On the bench, this kind of small, exact-fit component matters most during repair sessions, body refits, and detail-focused setup work. Kept alongside other model spares, the 5 x 26 mm tube is easy to pick out when a build calls for the same size and black aluminum finish.
Attachment parts
BMW 318i STW H Parts, model accessory set
319004291available in stores
This H Parts set for the BMW 318i STW focuses on 2 exterior component groups: the spoiler and the mirror parts. The designation keeps the purpose specific, making it easier to match the accessory to a build that needs these named body details rather than a broad mix of general spares. Within a model project, spoiler and mirror components do different visual jobs. The spoiler shapes the rear profile of the body, while the mirrors add the small side details that complete the vehicle outline. Because the ShortDescription identifies both elements directly, the set suits repair, replacement, or completion work where those exact parts are required. The H Parts naming also signals a defined section of components instead of a full body or a general hardware pack. On the workbench, this kind of accessory set fits naturally into repainting, restoring, or finishing a BMW 318i STW model. It can be used when original parts are missing, when a body shell is being refreshed, or when a build needs the correct exterior details to reach its intended appearance.
Attachment parts
BMW M3 GT2 H Parts Spoiler, model spare part
319005961available in stores
The H Parts Spoiler for the BMW M3 GT2 is a dedicated model spare part for restoring the rear bodywork of the named car body. It gives rebuilds and repairs a direct route back to the intended shape, with a component made specifically for this BMW M3 GT2 configuration rather than a universal substitute. Used during maintenance, refurbishment or a partial rebuild, the spoiler supports a cleaner finish where the original part has been lost, bent or worn. The H Parts designation identifies the exact component group, which helps when replacing a single section instead of sourcing a full body set. That makes it useful for keeping an existing model in running or display condition while preserving the car's defined rear profile. The part can also support workshop stock for repeat repairs on the same vehicle design. On the bench, this spare part fits naturally into repair sessions focused on body restoration and detail correction. It also suits long-term model care, where individual replacement parts help return a favourite BMW M3 GT2 build to a complete and consistent appearance.
Attachment parts
BMW M3 GT2 Light Cases, model accessory parts
319115265available in stores
J Parts Light cases BMW M3 GT2 is a model accessory set created for body detailing on the BMW M3 GT2 shell. The set focuses on the lamp housing areas, giving front and rear light positions the defined case shapes needed for a more faithful finished look during body preparation, restoration or replacement work. Because these are dedicated J Parts rather than a universal assortment, the parts align with the named BMW M3 GT2 application and support a more exact finish on that specific body style. This makes the set useful when refreshing a used shell, replacing missing light case pieces, or completing a new body with the correct accessory parts. The compact format also makes it practical to keep in workshop storage alongside other RC body supplies for future maintenance. On the bench, the parts fit naturally into trimming, mounting and detailing stages where lamp areas need their intended housings before the shell is considered complete. They also suit rebuild sessions in which worn or lost components are being replaced so the BMW M3 GT2 body regains its intended visual definition.
Attachment parts
BMW M4 GT3 EVO H Parts Model Accessories
319007823available in stores
This H Parts set is specified for the BMW M4 GT3 EVO 58751 and focuses on 2 exterior body areas: the spoiler and the mirrors. That clear designation helps when a build needs exact replacement sections instead of a general assortment of hardware. Because the set is tied to the BMW M4 GT3 EVO 58751 by name, it supports accurate parts matching during a repair, restoration or body refresh. The spoiler section restores a key rear body detail, while the mirror parts address small side elements that strongly affect the finished silhouette. Used as intended, the set helps return the model's outer form to its intended configuration after wear, handling damage or an incomplete body assembly. The H Parts designation also separates these components from unrelated sections, which simplifies parts selection within a larger model workshop. On the bench, this set fits the moments when a body shell needs specific exterior pieces rather than a full replacement. It also suits planned rebuilds in which visible details such as the rear wing and side mirrors are being renewed to bring the BMW M4 GT3 EVO 58751 back to a complete display-ready appearance.
Attachment parts
BMW M4 GT3 Wing Mount, model accessory
311835814available in stores
This BMW M4 GT3 wing mount is a dedicated model accessory for the LIGHT BMW M4 GT3 body version named in the data. It covers the specific rear mounting function needed to position the wing on the shell and supports a tidy, model-correct replacement when that part is missing or worn. The scope stays precise: the data identifies a wing mount, not a complete bodyshell or a full hardware set. That makes this part useful for repair work, rebuilds and parts completion where the correct mount for the stated BMW M4 GT3 version is needed. The wording w/o Ho.58751 appears in the designation and helps distinguish this accessory from other related versions or body references in the range. For model workbenches, that direct naming reduces guesswork when sorting spares or matching a replacement to an existing shell. Used during restoration or ongoing maintenance, the component fits naturally into projects that bring a display or running model back to complete visual form. It also suits spare-parts storage where clearly named, vehicle-specific accessories make later identification faster and more reliable.
Attachment parts
Clear Parts, model accessory for assembly kits
319115606available in stores
This clear parts set is a focused model accessory for assembly kit work, supplying the L Parts Clear Parts 58759 section as a dedicated transparent component for compatible builds. It suits repair, restoration and replacement tasks where a fresh clear section is needed to continue a bodywork project with the correct type of part. Within model making, transparent sections often shape the finished look of glazing, lamp covers or other see-through details, and a separate clear moulding helps keep those areas crisp during a rebuild. The L Parts designation identifies this set as a specific replacement group rather than a general craft material, which makes it useful when an existing build needs the matching transparent section again. The part can support repaint preparation, careful restoration after damage, or a second body project that calls for the same clear component type. On the workbench, this kind of accessory fits naturally into repair sessions, parts sorting and planned rebuilds of compatible kits. It also serves as a practical spare for modellers who keep key transparent sections ready for future maintenance or finishing work.
Attachment parts
Cockpit Interior Gr.C 47531, model accessory
319334145available in stores
Cockpit Interior Gr.C 47531 is a dedicated model accessory for scale modelling work that calls for a specific cockpit interior component. The naming points directly to the cockpit area, making this part relevant where an interior section is needed to complete, replace or refine a compatible build. Within a modelling project, cockpit parts shape the visible interior zone and help define the look of the finished subject through a more developed cabin section. The Gr.C designation identifies the variant exactly as listed, while the number 47531 helps distinguish this accessory within the wider range when matching parts to an existing build, a restoration task or a planned detailing step. Because the available data identifies this as an accessory rather than a full kit, the copy stays focused on its stated role as a separate cockpit interior component. This kind of part fits naturally into bench work where a model is being refreshed, completed or adapted with more specific interior detail. It also suits spare-parts planning for ongoing projects that need the correct cockpit section kept on hand before final assembly and finishing begin.
Attachment parts
Driver Helmet Cockpit Set, model accessory
319225037available in stores
This accessory set brings a driver helmet and cockpit parts together for Group C model builds, adding a more complete racing interior where the driver area remains visible through the body opening. The combination suits projects that need a defined cockpit section rather than a generic insert. The set is described as fitting Gr.C, so its purpose is tied to that racing class and to compatible scale model applications. A driver helmet gives the cockpit a clear focal point, while the accompanying interior parts help shape the seating and surrounding area into a more convincing competition layout. That makes the set useful both for fresh builds and for older models that need replacement interior details after wear, loss, or repainting. Because the data identifies these as fitting parts, the main value lies in compatibility with the intended Group C format and in the added visual depth inside the body shell. On the bench, the parts support careful finishing work where cockpit openings, window lines, and interior visibility all influence the final look. In a display setting, the added driver area helps a Group C racer read more clearly as a complete endurance machine rather than a shell alone.
Attachment parts
Ford Ranger body mount, model accessory, aluminium
314035069available in stores
This aluminium rollbar and body mount set is made for the Ford Ranger 58759 and concentrates on one of the most visible areas of the body shell. The metal construction gives the upper body section a crisp, technical look while providing the specific parts needed for replacement or restoration work on that model. Used as a model accessory, the set supports accurate work around the body mounting area rather than broad, generic modification. The rollbar element and body mount components belong to the same section of the vehicle, which helps maintain a consistent appearance across the rear body area. Aluminium is a strong visual choice for exposed scale hardware, and its finish suits builds where the mounting structure remains part of the overall look. The designation in the data identifies this set directly with Ford Ranger 58759, keeping the fit and purpose tied to that specific model reference. On the bench, this set suits rebuilds after wear, replacement of missing parts, or a planned visual refresh during a new body installation. It also fits display-focused builds where the body section benefits from more defined metal detailing around the rollbar and mount position.
Attachment parts
Ford Ranger Front Body Stay, model spare part
314305048available in stores
The Ford Ranger Front Body Stay is a dedicated spare part for compatible Tamiya model applications and focuses on one clear task: supporting the front body mounting area during repair or replacement work. Its designation points directly to the Ford Ranger fit, making it a targeted choice when an existing body support needs to be exchanged rather than improvised. Within a model build, a front body stay forms part of the mounting structure that positions the bodyshell correctly on the chassis. Replacing a missing or damaged stay can help return the shell to its intended attachment point and preserve the original layout of the build. The part is suited to routine workshop stock, rebuild projects and maintenance sessions where a model is being refreshed with matching replacement components. On the bench, this kind of spare part is useful when restoring a used vehicle, completing a repair after damage, or keeping service parts ready between running sessions. The named Ford Ranger reference keeps the application specific, which matters when a build depends on the correct body mounting hardware rather than a generic substitute. Warning! Not suitable for children under 14 years.
Attachment parts
Ford Ranger rear body mount set, aluminium pair
319804402available in stores
This rear body mount set is made for the Ford Ranger and supplies 2 matching rear mounts in aluminium for the body mounting area. The metal construction gives this replacement set a precise, technical character while keeping the focus on one clearly defined function at the back of the shell. As a dedicated rear mounting set, it suits repairs, refreshes and like-for-like parts replacement where the original mounting points need to be renewed as a pair. The 2-piece format keeps both sides aligned within the same set, which helps maintain an even look across the rear mounting area. Because the designation names the Ford Ranger directly, the fit is centered on that specific application rather than a generic universal use. The aluminium material also makes this set easy to identify among workshop spares when sorting parts for a build or maintenance session. On the bench, the pair works as a focused replacement for the rear body mounting position instead of a mixed hardware assortment. In a parts collection for Ford Ranger model maintenance, the set adds a clearly named rear-mount option ready for the next repair or rebuild.
Attachment parts
Front Body Mount, model spare part, M Parts
319115609available in stores
M Parts Front Body mount 58759 is a model spare part focused on one specific repair task: renewing the front body mounting point on a matching model. The naming in the data identifies the component directly, which helps keep maintenance work precise when a worn or damaged mount needs replacement. Because the data names this as a front body mount rather than a general hardware set, the copy can stay exact about its role. It belongs to the body fixing area at the front of the model and is intended to restore that connection point as a dedicated replacement component. The M Parts designation also helps separate this part from unrelated chassis, drivetrain or electronics spares when organising workshop stock. No battery is included. This kind of spare part fits routine upkeep, repair sessions and planned rebuild work where the existing front mount is no longer the part to keep in service. For model benches with sorted replacement stock, the 58759 reference gives a direct identifier for locating the correct component again later.
Attachment parts
Front End Bumper J Parts, model spare component
319115608available in stores
This J Parts front end bumper is a dedicated spare component for model maintenance and replacement work. It provides a direct way to renew the front section when the original bumper from the matching assembly is worn, damaged or missing, helping bring the model back to its intended configuration. The part is identified as J Parts Front end/Bumper 58759, which gives a clear reference point during servicing, parts sorting and repair planning. That designation is especially useful when an existing build needs one exact front section component rather than a broader assortment of hardware. As a front end piece, it belongs to the area of the model that shapes the nose assembly and completes the fitted look of the chassis layout. This spare component suits workshop use, replacement during ongoing maintenance and restoring a model that has seen regular running or storage wear. It also fits neatly into a parts stock for future repair jobs, where a clearly named front bumper section can save time during rebuilds and routine upkeep.
Attachment parts
G-Parts Hatchback, model parts for Clod Buster
300005970available in stores
This G-Parts Hatchback set is made for Clod Buster 58321 and 58423 and provides the specific rear hatch components needed for repair, restoration or model upkeep. The set contains 1x G-Parts with 9 pieces, supplied together on a moulded sprue so the matching sections stay grouped until preparation and fitting begin. The off-white moulded parts show a mix of panel, bracket and round component shapes, each formed with mounting holes or connection points that support accurate placement during assembly. As a dedicated spare and supply set within the Models & Accessories range, it suits work that calls for the correct hatchback section rather than improvised replacement pieces. The grouped layout on the frame also helps keep small parts together while trimming, sorting and checking fit against the intended model. Used for restoring an older build or replacing damaged rear body sections on a current Clod Buster, this set gives a direct route to bringing the model back into proper form. It also fits workshop stock for ongoing maintenance of 58321 and 58423 builds where model-specific body parts are worth keeping on hand. Warning! Not suitable for children under 14 years.
Attachment parts
Mini Cooper H-Parts, model spare part set
310005553available in stores
The Mini Cooper H-Parts set is a dedicated spare part set for model maintenance, rebuilds and restoration work on the Mini Cooper 58149. Its focus is clear: chrome bumper components that restore missing or damaged exterior trim with the correct designated part group rather than a generic substitute. Because the data identifies this set specifically as H-Parts for the Mini Cooper 58149, it suits targeted replacement work where the matching part reference matters. The chrome finish is the defining visual feature here, giving the bumper area the bright trim appearance intended for this version. That makes the set useful not only when a model has broken parts, but also when an older build is being refreshed and the exterior needs the correct bumper section again. As a named spare part set, it also helps keep workshop storage organised around the exact reference needed for future maintenance. On the bench, this kind of replacement set fits naturally into careful repair sessions, partial rebuilds and long-term model upkeep. When a Mini Cooper 58149 returns to display or running condition, the correct H-Parts bumper pieces help bring back the intended exterior look with a part match tied to the stated model reference.
Attachment parts
Mini Cooper J Parts Mounts Model Accessory
310115187available in stores
This Mini Cooper J Parts Mounts accessory brings a clearly named component set into model work where accurate replacement and project-specific selection matter. The source data identifies the set as J Parts Mounts for Mini Cooper, which makes it suited to builds, repairs or parts sorting that call for this exact designation rather than a general hardware choice. Within a workshop setup, a dedicated mount set helps keep body-related or structure-related fitting tasks tied to the intended application in the data. That can be useful during restoration of an older build, when separating sprues and spare sections, or when preparing a model for a clean rebuild with the correct named parts at hand. The concise designation also helps distinguish this set from broader accessory assortments, so storage, planning and replacement work stay organised around one specific parts group. On the bench, this kind of accessory fits naturally into careful model maintenance, selective replacement and ongoing project organisation. It suits hobby sessions where the focus is not a full new kit, but the exact J Parts Mounts needed to continue work on a Mini Cooper model with the right reference in view.
Attachment parts
Mini Cooper Radiator Grill, model spare part
319115069available in stores
This K Parts radiator grill for a Mini Cooper model is a focused replacement component for restoring front-end detail on a compatible scale build. The grille section shapes the look of the nose area and helps bring back the defined appearance of the body when an original part is missing, damaged or no longer usable. As a dedicated spare part, it supports precise repair work rather than broad modification. The part is intended for model maintenance, refurbishment or completion of an existing Mini Cooper project where the front grille detail matters to the finished appearance. Its role is visual and structural within the body detailing, giving builders a direct way to address one specific area instead of changing larger sections. It fits naturally into workshop tasks such as replacing a lost piece during a rebuild, refreshing a previously used body shell, or completing a stored project that still needs its front grille element. For collectors and builders who maintain scale vehicles over time, a model-specific replacement part like this keeps restoration work clear, targeted and true to the original design language.
Attachment parts
NISSAN R91 Wing Mount, model parts set
319115042available in stores
This parts set is made for the NISSAN R91 and focuses on the rear wing mounting area with J Parts wing mount and fitment pieces. The model-specific designation helps keep repair work and replacement tasks tied to the intended body layout, which matters when a build needs the correct attachment points rather than a close substitute. As a dedicated spares set, it suits careful rebuilds, unfinished projects, and maintenance on an existing model where small mounting components are missing or worn. The J Parts designation identifies the set within the original parts structure, which helps when matching replacement pieces to the correct section of the car body. No scale, material, or pack count is stated in the data, so the emphasis stays on the confirmed function: wing mounting and fitment for the NISSAN R91. On the bench, these parts support straightforward repair planning by narrowing the job to the correct area of the model. They fit naturally into restoration work, parts sorting, and body reassembly where a direct NISSAN R91 match is the key requirement.
Attachment parts
NISSAN R91CP Wing Endplate Set, model spare part
319405762available in stores
This wing endplate set is made for the NISSAN R91CP Gr.C and supplies 2 matching pieces for the rear wing assembly. As a dedicated model spare part, it focuses on one visible body detail that shapes the race car's aerodynamic look and completes the wing outline with the correct side plates. Used during repair or restoration, the set allows worn, missing or damaged rear wing plates to be exchanged while leaving the rest of the bodywork unchanged. The pair format matches the left and right sides of the wing, which keeps replacement work straightforward when both side plates need attention at the same time. For existing builds, this kind of targeted spare part helps maintain the intended appearance of the NISSAN R91CP Gr.C without replacing larger sections. In a hobby workspace, small body spares like these are useful for ongoing maintenance, rebuilds and careful shelf presentation after running or handling. The set suits model collections, workshop drawers and restoration projects where the rear wing detail needs to be brought back into shape with the correct matching components.
Attachment parts
Plastic Washer Gr.C, model accessory, 4-piece
319405643available in stores
Plastic Washer Gr.C is a small but essential model accessory for detailed assembly, repair and parts management. The set contains 4 washers, giving a defined quantity for bench stock or for replacing the exact component named in the specification. The Gr.C designation is the key reference here, because it identifies the washer type rather than leaving the part as a generic hardware substitute. That makes the set useful when a build calls for this specific washer group or when an existing assembly needs the same part again during maintenance. The compact format also fits neatly into a spares system, where clearly identified small parts help keep model work organised and reduce interruptions during a session at the workbench. Whether the task is a fresh build, a careful repair or a routine hardware check, this washer set adds a straightforward supply of matching small parts. It suits model benches that rely on labelled replacement components and supports steady progress when the correct washer is needed at the right moment.
Attachment parts
Radiator Mirror Parts, model accessory set
319115610available in stores
This accessory set centers on radiator and mirror parts for model detailing, giving exterior finishing work two small but visually important component groups. Used on an existing build, these pieces help restore front-end definition and side-view detail where missing or worn parts would leave the body incomplete. The data identifies the set as N Parts Radiator/Mirror 58759, placing it in model supplies rather than a full kit or ready-to-run vehicle. That makes it suited to replacement work, careful restoration, or the final stages of a scale project where trim pieces shape the overall appearance. Radiator parts can sharpen the look of the front section, while mirror parts add the equipment detail that often distinguishes a finished shell from an unfinished one. Because the set is focused on exterior components, it fits neatly into paint-stage corrections, rebuilds, and parts swaps without shifting attention away from the main body. On the workbench, these parts support precise touch-ups after wear, transport damage, or incomplete older builds. They also suit planned customisation, where a model needs the correct exterior fittings to bring the intended look together.
Attachment parts
Tailgate Figure Parts, model accessory set
319007826available in stores
This H Parts Tailgate Figure 58759 set is a model accessory for a clearly named application, giving builders a direct route to the specified component group instead of searching through general spare parts. The 58759 reference keeps the match tied to one defined build context, which is especially useful when a model needs a replacement section or a missing piece completed. Because the available data identifies this set as H Parts rather than a full kit, the copy stays with what is verifiable: a dedicated parts set linked to Tailgate Figure 58759. That makes it relevant for repair work, restoration of an earlier build, or finishing a model that needs the correct section in place. The designation also helps separate this set from universal accessories, since the naming points to a specific figure and tailgate area rather than a broad category of mixed components. On the workbench, a clearly identified parts set saves time during sorting and comparison, especially when an existing model already has most sections assembled. For collectors maintaining a display piece or builders returning a project to complete condition, the named 58759 reference provides the key detail needed for confident selection.
Attachment parts
Windshield G Parts Bag, model accessory set
319007825available in stores
G Parts Bag Windshield 58759 is a model accessory set centered on a designated windshield component for compatible builds. The naming in the source data points to a specific spare or replacement part rather than a full vehicle kit, making it relevant for repair work, restoration tasks, or completing a model that requires this exact reference. Within a model workshop, a clearly identified parts bag helps keep maintenance and assembly work precise. The G Parts Bag designation separates this set from general-purpose supplies and indicates a defined fit within a broader build system. That matters when an existing windshield is missing, damaged, or being replaced during a rebuild. The 58759 reference adds another concrete identification point for matching the correct accessory to the intended model. This kind of accessory suits bench work where a build is being finished, refreshed, or returned to running and display condition. It also fits parts storage for hobby setups that keep designated replacement components on hand for future service and careful model upkeep.