RC motors
The motor: a central component of your RC vehicle. Find brushless motors, electric motors and much more! For more information about our RC motors, you can read on here.
RC motors
540 Sport Tuned, electric motor, RS540 drive unit
300053068€38.49
The RS540 Sport Tuned electric motor brings a clear step up in drive response for hobby builds that use a 540-size brushed unit. Its tuned setup is designed to outperform standard silver can motors, translating motor input into quicker launches and a higher top end when installed in a compatible RC or model vehicle drivetrain. The cylindrical metal housing carries the RS-540 designation on the can, with an exposed output shaft on one side and attached red and black leads on the other. Bullet-style connectors are fitted to the wires, which helps streamline connection to compatible electronics during a motor swap or fresh build. A printed rotation direction marking on the housing gives a direct visual guide for correct installation, especially where gear mesh and shaft direction need to match the layout of the chassis. The brushed motor format also makes this unit relevant for hobbyists searching specifically for a classic serviceable drive style rather than a brushless system. In use, the motor suits upgrade projects where a stock setup leaves room for more punch on acceleration or more speed on longer runs. It also fits bench builds and replacement work where a 540-class motor with pre-attached leads and a marked rotation direction keeps the drivetrain setup straightforward and focused on running performance.
RC motors
CR-01 Crawler Motor CR-Tuned 35T, RC motor
300054114€59.49
The CR-01 Crawler Motor CR-Tuned 35T is an RC motor built for slow-moving crawler and truck models that need measured throttle input and strong pulling force. Its 35-turn layout shifts the focus away from outright speed and toward torque, so technical climbs, careful descents and tight obstacle sections feel more controlled at the trigger. In size 540 format, this motor suits a broad range of RC installations and is specified for 7.2 V operation. At that voltage it reaches 12,000 rpm and 36.7 mN/m torque, a combination aimed at low-speed driving rather than high-rev running. The sintered design is paired with smooth power transfer and long endurance, while the black motor body uses an end bell that acts as a heat sink. A 0 lead angle supports consistent performance, and replaceable standard type brushes allow maintenance when the motor sees regular trail use. The scope of delivery contains 1 electric motor. In a crawler chassis, the output suits rock sections, uneven ground and slow line corrections where wheel placement matters. In RC truck builds, the same torque-focused character supports controlled starts and steady progress under load on scale driving routes. Warning! Not suitable for children under 14 years.
RC motors
Electric Motor Dirt-Tuned 27T RC Motor
300053929€59.99
The Dirt-Tuned 27T electric motor brings a focused performance upgrade to Tamiya electric off-road vehicles, pairing a 27 turn brushed layout with 17,000 rpm at no load on 7.2V and 37.24 mN-m torque at best efficiency. The silver can design uses ventilation slots and a protruding output shaft for standard motor installation in compatible R/C chassis, giving off-road builds a motor tuned for loose-grip running and race-day use. Its operating voltage range of 6.6 to 8.4V DC gives the motor flexibility across common battery setups, while the rated voltage is 7.2V DC. A heatsink-type end bell helps move heat away from the rear section during repeated laps, and the detachable chip-type condenser is integrated into the motor for noise reduction. The sponge cover protects the motor from debris in off-road conditions, and standard-type worn brushes can be replaced when maintenance is needed. Compatibility notes in the data name XV-01, XV-01T and XV-01 PRO chassis, where the motor cable may need extending if it is not long enough. TT-02, TT-02RR, TT-02B, WR-02, WR-02G, WR-02C, WR-02CB, GF-01, GF-01TR, GF-01CB, G6-01, G6-01TR, CC-01 and CC-02 chassis are also listed, with full bearings required. This makes the motor a useful option for builders refining an existing off-road machine or preparing a chassis for official Tamiya race use. Warning! Not suitable for children under 14 years.
RC motors
GT-Tuned II 25T BB Motor, RC motor
300022096€39.99
The GT-Tuned II 25T BB motor is an electric RC motor built for model driving setups that need a defined 25-turn specification and ball bearing support. Its compact tuning-focused format makes it a practical choice for replacing a worn unit or refining the drive character of a compatible chassis during a rebuild. The 25T configuration gives this motor a clear technical identity within RC maintenance and tuning work, while the BB construction points to ball bearings at both ends of the shaft. That bearing layout supports smoother rotation than a plain bushing setup and adds a concrete mechanical detail for hobby workbench planning. The supplied data identifies this version as a motor in the Models & Accessories and Models Supplies range, which places it squarely in the parts and upgrade category rather than as a complete vehicle. Batteries are not included. On the bench, this motor suits routine service jobs, drivetrain refreshes and planned tuning changes where a known turn count matters. It also works well as a spare kept alongside other RC maintenance parts, ready for the next compatible build or repair session. Warning! Not suitable for children under 14 years.
RC motors
Lightly-Tuned II 28T BB, motor for RC models
300022097€39.99
The Lightly-Tuned II 28T BB motor brings a focused performance step to RC model builds with a 28-turn layout and ball bearing support. As a separate drive component, it suits builders who want a defined replacement motor or a measured tuning change rather than a full electronics package. The can-style format makes it relevant for RC chassis designed for this class of electric motor, while the BB specification points to ball bearings at the rotating assembly. That bearing setup supports smoother running and helps the motor maintain a more even feel through repeated use. The Lightly-Tuned II designation places it in the tuning space between a basic stock motor and more aggressive race-oriented options, which makes it useful when a build calls for a balanced step in response and running character. Because the data identifies this as a motor only, the copy stays focused on the drive unit itself rather than implying extra electronics or accessories. In workshop use, this motor fits naturally into maintenance, replacement, and upgrade planning for RC model projects. It works well when an existing chassis needs a fresh drive unit or when a builder wants to refine the running feel with a clearly specified 28T motor and ball bearing construction. Warning! Not suitable for children under 14 years.
RC motors
Lightly-Tuned Motor 28T, RC motor, 7.2V
300053983€45.79
Lightly-Tuned Motor 28T brings a measured performance increase to compatible electric R/C cars, combining higher torque than a standard RS-540 type motor with control that still suits practice driving and club-level running. The black motor can with blue endbell, output shaft and pre-attached wires gives the drivetrain a direct, competition-focused upgrade for chassis that accept this format. At 7.2V, the motor reaches 16,300 r/min at no load and delivers 55.4 mN-m torque at best efficiency. That balance makes it suitable for M chassis cars used in official Tamiya races, while also giving touring car setups a stronger response than a stock unit. Standard-type brushes can be replaced when worn, and cleaning brushes can be used for upkeep. The easily detachable chip-type condenser simplifies service work around the endbell and terminals. Scope of delivery: 1 x motor. Compatibility covers M-03, M-04 and touring car chassis, plus WR-02, WR-02G, WR-02C, WR-02CB, GF-01TR, GF-01CB, G6-01 and G6-01TR chassis where full bearings are required. On a practice track, the added torque helps a chassis pull cleanly out of slower corners; in race preparation, the controlled step beyond a standard 540 motor leaves room to adapt driving inputs gradually. Warning! Not suitable for children under 14 years.
RC motors
Racing Motor Brush Standard, motor spare parts
300053581€7.79
The Racing Motor Brush Standard set provides a focused maintenance part for compatible brushed motor setups, with 2 replacement brushes supplied for direct service work. Each piece uses a rectangular brush block, a braided silver-coloured lead and a metal ring terminal, a layout that supports electrical connection at the motor's brush mount while keeping the part compact and easy to position during repair. This spare set is intended for components found in various Tamiya brushed motors, making it a practical addition to routine workshop stock for RC running gear and motor upkeep. Brush wear affects how the commutator receives current, so replacing the brushes before heavy wear builds up helps preserve the motor's running behaviour and output consistency. The plain standard specification keeps the set aligned with original service needs rather than upgrade tuning, which is useful when restoring an existing motor to proper operating condition. On the bench, the set suits regular inspection cycles, rebuild sessions and pre-run maintenance checks where small electrical wear parts matter. It also fits neatly into a parts box for ongoing support of brushed motor fleets, especially when a quick replacement is needed to return a compatible motor to service.
RC motors
RS-540 Torque-Tuned, electric motor for RC cars
300054358€14.49
The RS-540 Torque-Tuned electric motor is a focused upgrade for RC car builds that need a stronger balance of speed and response than a standard Type 540 motor. With a 25T specification, 16,000 rpm idle speed, 30 mNm torque and 10 A current draw, it is tuned to sharpen acceleration while keeping the setup below the output level of a Sport-Tuned motor. The silver can motor uses a metal output shaft, attached wires and marked rotation direction for clear installation orientation in compatible drivetrains. Its rated voltage is 7.2 V DC, with an operating range of 6.6-8.4 V DC, which gives a defined window for matching battery and drivetrain combinations. Tamiya positions this motor between the standard 27T Type 540 and the 23T Sport-Tuned option, making it a useful step when a stock setup feels too mild and a hotter tune is not the target. In comparative testing on a TT-01 chassis with kit-standard gear ratio, the standard 540 reached 24.3 km/h, this Torque-Tuned motor reached 26 km/h, and the Sport-Tuned motor reached 29.1 km/h. That spread makes the motor well suited to on-road RC car tuning where smoother launches and a modest speed increase matter more than an extreme jump in output. It also works as a replacement when a worn stock motor no longer delivers the same response, letting the drivetrain pick up pace with a clearly defined specification.
RC motors
Snap Connector Set, RC wiring accessory, 10 pairs
300050245€7.29
This snap connector set brings order to RC wiring with 10 male connectors, 10 female connectors and 20 matching caps for repeated cable work across repairs, replacements and fresh installations. The metal terminals and clear sleeves create a clean, compact connection format that suits hobby electronics where cable routing and contact points need to stay easy to identify. The assembly method is straightforward and mechanical. Cable insulation is stripped back by about 5 mm, the cap is threaded onto the cable first, and the exposed copper wire is inserted into the connector before crimping. The instruction sheet shows the wire position inside the barrel and the crimping pressure from both sides, which helps keep the connector shape intact while securing the conductor. Once crimped, the cap slides over the terminal to cover the contact area. Pliers with a connector clamp are required separately. This set fits naturally into bench work for RC cars, hobby electronics and small wiring updates where matching male and female terminals are needed in multiples. It also works well as a stock of replacement connectors for workshop drawers, keeping the same connection style ready for the next cable repair or custom lead.
RC motors
Super Stock BZ Off-Road Motor, RC motor, 23T
300053930€67.49
The Super Stock BZ Off-Road 23T is an electric R/C motor built to give off-road cars a torque-focused drive feel at 7.2 V. With 26,500 rpm at no load and 49 mN-m torque at best efficiency, it suits layouts that need pull through dirt sections, uneven grip and repeated acceleration out of tighter corners. Inside the motor, the brush damper is designed to maintain firm contact with the commutator, and the terminal heat sink works with a chip type condenser to support consistent electrical performance. The gun metal motor can uses side and front slits to release heat, while the blue anodized aluminum end bell adds a distinct finish and houses standard-type brushes that can be replaced after disassembly. A sponge cover is included to help keep dust and debris away from the motor during running. The recommended gear ratio range is 9:1 to 11:1. The scope of delivery contains 1 electric motor. Ball bearings are required for installation. For XV-01, XV-01T and XV-01 PRO chassis, motor extension cables may be required if the existing cable does not reach, while TT-02, TT-01 TYPE-E, TT-02RR and TT-02B chassis require full bearings for use with this motor. Warning! Not suitable for children under 14 years.
RC motors
T3-01 370 Sport-Tuned Motor, RC motor
300054860€22.79
The T3-01 370 Sport-Tuned Motor is an upgrade motor for the T3-01 chassis, built to give compatible R/C models a more dynamic drive feel. With an input range of 6.6-7.2V and a rated speed of 22,200 rpm at 7.2V, it shifts the character of the drivetrain toward quicker response and a livelier running style. The motor delivers a maximum torque of 4.91 mN-m and a maximum usage of 2.85 A, giving clear electrical and performance figures for matched setups. The housing carries a marked rotation direction, which helps align installation correctly on the chassis. Attached red and black lead wires are fitted for connection, and the set shown includes a brass pinion gear plus an L-shaped hex key for fitting. For operation, a 6.6V LF1100 Racing Pack is required as a power source. The manufacturer also specifies use with a fluorine coated 06 module pinion gear in 26T or 27T, a T3-01 full ball bearing set, a one-piece rear axle shaft set, and a reinforced differential joint and pinion set. Installed in a Dancing Rider setup, this motor supports a more eager launch and a brisker feel through turns and short straights. It also suits T3-01 builders refining a chassis around matched drivetrain parts and a defined 6.6-7.2V power range. Warning! Not suitable for children under 14 years.
RC motors
TBLM-02S 10.5T Motor, RC motor, brushless
300054611€103.99
The TBLM-02S 10.5T Motor brings sensored brushless control to RC running, combining efficient communication with a compatible electronic speed controller and smooth operation at both low and high speeds. That direct sensor-based link helps the motor deliver consistent response when throttle input changes quickly on the track. The 10.5T specification places this motor in a performance-focused range for hobby setups that need crisp acceleration and controlled delivery. Adjustable motor timing adds another layer of setup tuning, allowing the response to be matched more closely to driving conditions and chassis preferences. Brushless construction also cuts down on maintenance work associated with brush wear, making regular use easier to manage over time. The motor is especially suited to use with the Tamiya Brushless ESC 03 Sensored, and it is also compatible with TBLE-01S and TBLE-02S. When paired with TBLE-02S, a cooling fan unit for the ESC is highly recommended because the ESC's overheat protection may activate under excessive load. This motor fits naturally into upgrade builds, replacement plans and fresh RC electronics setups where sensored control is the priority. On technical sections, low-speed smoothness supports measured inputs, while higher-speed running benefits from the same stable communication between motor and ESC. Warning! Not suitable for children under 14 years.
RC motors
TBLM-02S 15.5T Motor, brushless RC motor
300054612€103.99
The TBLM-02S 15.5T Motor brings sensored brushless control to RC model setups that need clean response across a wide speed range. Sensor technology allows the motor to exchange signals with a compatible electronic speed controller, helping the drive system deliver smooth low-speed operation and consistent performance when revs rise. The 15.5T specification suits drivers looking for a balanced brushless option, while adjustable motor timing adds another layer of setup control for tuning response to gearing and track conditions. Brushless construction also cuts down on regular maintenance work associated with brushed motor wear, making repeated running sessions easier to keep on schedule. The motor is suited to use with the Tamiya Brushless ESC 03 Sensored and is also compatible with the TBLE-01S and TBLE-02S speed controllers. In workshop use, the sensored layout supports more predictable throttle feel when setting a model up for technical sections, tighter corners or steady acceleration out of bends. For racers refining an existing chassis or building a fresh electronics package, this motor adds a focused upgrade path built around ESC communication, timing adjustment and reduced upkeep. Warning! Not suitable for children under 14 years.
RC motors
TBLM-02S 17.5T Sensored Brushless RC Motor
300054894€103.99
The TBLM-02S 17.5T sensored brushless motor is a focused upgrade for 1/10 RC chassis that need controlled power delivery across both slow sections and faster runs. Its internal sensor works with ESC RPM data to support smooth operation, so throttle inputs stay more consistent when a car is easing through technical corners or building speed on a straight. The brushless layout reduces maintenance and supports long motor life, while adjustable timing gives a direct mechanical tuning option through the end bell screws. This motor measures 58 mm in length, 36 mm in diameter and weighs 185 g including wires, with an input voltage range of 6.6V to 7.2V. The housing carries clearly marked A, B and C terminals plus a sensor port, and the wiring layout follows color-matched blue, yellow and orange motor and ESC leads. Reference KV is 2200KV at timing position 2. Compatibility covers 1/10 Tamiya touring cars, M-Chassis, buggy cars, F103 chassis and F104 chassis, excluding some re-issued kits. Use is intended with sensored brushless ESC units from the TBLE series. In workshop tuning or race-day setup, the motor gives a clear base for matching gearing, chassis layout and timing to the demands of the track.
RC motors
TBLM-02S Brushless Motor, RC motor, 21.5T sensored
300054895€103.99
The TBLM-02S Brushless Motor brings sensored brushless control to 1/10 RC cars with a 21.5T specification tuned for smooth response across low and high speeds. An internal sensor feeds positional information to the ESC alongside RPM data, helping the drivetrain react with greater precision when pulling away, holding a line through technical sections, or managing speed changes on mixed layouts. This motor is designed for use with Tamiya sensored ESC systems such as the TBLE series. Its brushless construction reduces maintenance compared with brushed layouts while supporting long motor life in regular RC use. The adjustable timing adds a direct setup variable for fine-tuning response, and the stated reference value of 1800KV at timing position 2 gives a clear baseline for planning a compatible build. The housing carries a sensor port plus A, B and C wire terminals, and the complete unit weighs 185 g including wires. Input voltage is specified at 6.6 V to 7.2 V. Compatibility covers 1/10 Tamiya touring cars, M-Chassis and buggy cars, plus F103 and F104 chassis, excluding some re-issued kits. That makes the TBLM-02S a focused upgrade choice for drivers refining an existing chassis or assembling a class-based on-road setup around a defined 21.5T motor format.
RC motors
Torque-Tuned 35T Motor, RC motor upgrade
300022099€39.99
The LT Torque-Tuned 35T motor brings a focused upgrade path to RC model running, combining a 35T specification with BB timing for a controlled, usable power character. In practice, that means measured acceleration, cleaner response to throttle inputs and a setup that stays approachable when a chassis needs more tuning range than a basic stock motor can offer. The 35-turn layout points this motor toward balanced performance rather than an all-out top-speed focus, which makes it relevant for technical driving, repeatable lap work and general setup comparisons. BB timing further defines how the motor delivers its output, helping the running feel consistent when testing gearing, tyres or surface changes. As a dedicated motor unit, it also gives model builders a straightforward way to swap one key drivetrain component and judge the effect of a single hardware change instead of altering several variables at once. On the bench, the LT Torque-Tuned 35T motor fits naturally into maintenance, refresh and tuning routines for RC model collections. At the track or in club use, it supports sessions where controllable delivery, repeatable behaviour and clear setup feedback matter more than chasing raw figures alone. Warning! Not suitable for children under 14 years.
RC motors
Type 370 Torque-Tuned Motor RC Chassis Upgrade
300054919€22.79
The Type 370 Torque-Tuned Motor is a focused upgrade for compatible T3-01 and SW-01 chassis builds, replacing the standard kit motor with a brushed unit tuned for stronger acceleration and higher speed. Its 18,000 rpm rating and 7.2 V input give compact chassis a sharper, more eager response when the drivetrain loads up under throttle. The set contains the motor and a pinion adapter, and the installation layout uses the adapter on the motor shaft rather than the kit-standard pinion gear. The instruction data specifies a 1.5 mm hex wrench for tightening the adapter on the shaft flat, which helps create the correct connection before the matching pinion gear is fitted. For T3-01, the motor is used with a 26T pinion gear and additional hop-up parts listed for that chassis. For SW-01, the setup uses separately sold AV pinion gear sets in 16T or 18T configurations, depending on the selected parts. Full ball bearings are also specified when employing this motor. This upgrade suits builders refining a compact wheelie or offbeat chassis layout with a more purposeful drive feel. In workshop use, it fits naturally into a planned drivetrain conversion where the correct pinion, bearings and related parts are selected alongside the motor. As a replacement unit, it also serves existing T3-01 or SW-01 builds that are ready to move beyond the standard kit motor. Warning! Not suitable for children under 14 years.
RC motors
Type 380 Sport-Tuned Motor, RC motor for RM-01
300054393€12.99
The Type 380 Sport-Tuned Motor is a compact brushed upgrade motor for RM-01 and TA05 M-Four chassis machines, built to raise pace and response in small RC car layouts. Pre-wired cables with standard connectors simplify installation, while the cylindrical metal housing, front ventilation openings and 2.3 mm output shaft suit direct integration into the stated drivetrain format. At 7.2V with 6 cells, the motor reaches 24,900 rpm at no load and 20,000 rpm under load, with torque rated at 129 gf/cm. Continuous current is 2.0A and no-load current is 1.28A, giving a clear technical picture for matching the motor to an existing electrical setup. When used with the model's standard gear ratio, it delivers higher top speed and improved acceleration than the Type 380-S motor. The set contains 1 motor and 2 pinion adapters. This motor suits rebuilds, replacement work and performance-focused updates on the compatible chassis named in the data. It is not compatible with Holiday Buggy 2010 or Sand Rover 2011, so the fit stays specific to RM-01 and TA05 M-Four applications where compact size and tuned output matter most. Warning! Not suitable for children under 14 years.
RC motors
Type 540-N electric motor, hobby drive unit
300051673€17.99
The Type 540-N electric motor brings a classic brushed drive format to model and RC applications with a standard 540 size and a direct output shaft for gear-driven setups. Its no-load speed of 13,800 rpm gives drivetrains a lively operating range, while the silver metal housing with ventilation openings supports heat dissipation during running sessions. The motor is specified for an input voltage range of 7.2V to 8.4V, which places it within common hobby power systems used in many assembled vehicles and mechanical projects. At 7.2V, it produces a maximum torque of 283 gf/cm and draws 8.1 A of current, giving clear reference points when matching the drive to gearing and electronic components. The use of kit-included pinion gears is recommended. The attached green and yellow wires end in metal connectors for straightforward integration into an existing electrical layout. As a replacement motor or standard drive choice, this unit suits builds that need a known 540-format specification rather than an undefined upgrade path. It fits naturally into workshop setups where gearing, voltage and current figures guide the selection of compatible drivetrain parts and control hardware.
RC motors
Super Stock Motor RZ 23T RC Brushed Motor
300053697soon available again
The Super Stock Motor RZ 23T brings high-rev brushed power to RC vehicle setups built for sprint racing and fast circuits. Rated for 7.2V, it reaches 23,000 rpm at maximum efficiency and 27,500 rpm at no load, giving lightweight touring and track-focused builds a motor that favors speed on longer straights and quick run-up out of corners. Its lay-down brush layout is designed for firm contact with the commutator, while brush dampers support stable operation as the motor spins up. Torque at maximum efficiency is 500 g/cm, and the stated efficiency is 76%, combining useful pull with a strong rev range for stock-class style running. The silver motor can is paired with a red anodized end bell, and the heat-dissipating motor shield and terminal heat sink help manage temperature during repeated battery runs. The motor can be disassembled for maintenance, with a detachable chip capacitor and accessible brush hardware that suit regular inspection and service. Scope of delivery: 1 x engine. In an RC chassis tuned for quick gearing and smooth drivetrain movement, this motor fits the kind of setup where clean throttle response, sustained revs and routine maintenance all matter. Warning! Not suitable for children under 14 years.
RC motors
Super Stock Motor TZ, RC motor, 23T 7.2V
300053696soon available again
Super Stock Motor TZ is a 23T brushed RC motor built for electric radio control car use, with a setup aimed at balancing torque and revs for endurance racing and low speed track layouts. At 7.2V, the motor reaches 26,500 rpm at no load and delivers 500 g-cm torque at best efficiency, giving drivetrains a strong pull out of slower sections while keeping the response lively through repeated laps. The motor uses standard brushes, a blue anodized end bell and brush dampers that support contact with the commutator during running. A terminal heat sink and detachable chip capacitor are fitted at the rear connection area, where they support the electrical layout without complicating access. The housing can be opened for maintenance, so internal parts such as the brushes and rotor area can be inspected and serviced when wear builds up over multiple battery packs. JRM certification is stated for this motor. Installed in an electric touring car or similar RC chassis, this motor suits track sessions that reward controlled acceleration, repeatable corner exits and dependable running over longer stints. It also fits maintenance-focused hobby setups where rebuildable construction matters as much as outright output.
RC motors: the power source for your model building adventure
RC motors are the heart of every remote-controlled model. Whether you're driving a fast RC car, a powerful RC truck, or an impressive RC tank – the right motor determines how much fun you'll have with your model building projects. At Tamiya, you'll find a wide selection of high-quality RC motors, perfectly suited to different needs and models.
Electric motors in RC model building: brushed and brushless
Brushed RC motors: ideal for beginners
Brushed RC motors are often the first choice for beginners in model building. These motors have carbon brushes inside that are responsible for transferring electricity. The technology is simple, easy to understand, and allows for straightforward maintenance. Brushed motors are affordable and are perfect for models where top speed is not the priority, such as RC crawlers or RC drift cars. They are ideal for those who want to gain their first experience in RC model building.
Brushless RC motors: powerful and durable
For ambitious model builders looking to get the most out of their vehicles, brushless RC motors are the perfect choice. These motors are brushless, meaning they have no moving parts for electrical transfer. As a result, they are almost maintenance-free, more durable, and offer significantly better performance. Brushless motors for RC cars are known for their high RPM and instant torque, enabling your models to accelerate faster and reach higher speeds. These motors are ideal for racing vehicles and models designed for performance.
Electric motors vs. combustion engines
In RC model building, there are generally two types of motors: electric motors and combustion engines. At Tamiya, we focus entirely on RC electric motors, as they offer many advantages, especially for model builders who value easy handling and low maintenance.
Easy handling and environmentally friendly
Electric motors are easy to operate. Unlike combustion engines, they don’t require fuel and are ready to use as soon as the battery is charged. They produce no emissions, making them more environmentally friendly and suitable for use indoors or in the garden without restrictions. This makes them the ideal choice for those who want to use their models flexibly.
Low maintenance and quiet operation
One of the major advantages of RC electric motors is that they are low maintenance compared to combustion engines. You won’t need to adjust carburettors or deal with leftover oil and dirt. Additionally, electric motors are quiet, which is especially beneficial if you're operating them in residential areas or indoors.
Using and maintaining RC motors correctly
Even though brushless RC motors require minimal maintenance, there are a few things you should keep in mind to maximise their lifespan. Ensure that the motor is well ventilated, especially when operating at high speeds and under heavy loads. For brushed motors, it's a good idea to regularly check the brushes for wear and replace them if necessary to maintain consistent performance.
RC motors for every model and requirement
Whether you're just starting out in model building or are already an experienced hobbyist – Tamiya’s RC motors offer the right solution for every need. With brushed motors, you get a solid, affordable option for your first models, while brushless motors provide maximum performance and efficiency. Discover our wide range of RC electric motors and make sure your model always runs with optimal power.