Powertrain
Looking for a powertrain? You've come to the right place, discover gears, motor pinions and everything you need to get your RC model moving.
Powertrain
Looking for a powertrain? You've come to the right place, discover gears, motor pinions and everything you need to get your RC model moving.
More
Axes & drive shafts
12 mm Wheel Hub Hexagon Set, RC chassis accessory
300053056€10.59
This 12 mm wheel hub hexagon set brings a clean aluminium upgrade to the wheel mounting area on a wide range of RC chassis. The pin-type design pairs each hex hub with a matching pin, creating the interface that transfers drive from the axle to the wheel while keeping the fit consistent during assembly, maintenance and parts replacement. The scope of delivery includes 4 wheel hub hexagons and 4 pins. The aluminium construction gives these small drivetrain parts a crisp machined look, and the 12 mm hex format matches the standard wheel mounting size used across many compatible on-road and off-road platforms. Fitment listed in the data covers CR-01, DF-03, DF-02, DT-03, DT-03T, DT-02, F103GT, M-06, M-06 PRO, M-05, M-05 PRO, M-05 ver.II PRO, MF-01X, TT-02B, TT-02FT, TT-02RR, TT-02D, TT-02 TYPE-SR, TT-02 TYPE-S, TT-02, TT-01D TYPE-E and TT-01 TYPE-E chassis. For workshop stock, rebuilds or replacing worn wheel mounting parts, this set covers one full chassis with 4 matching hubs and pins. It suits bench work where exact chassis compatibility matters and keeps the wheel mounting hardware aligned with the specified 12 mm standard used by the listed platforms. Warning! Not suitable for children under 14 years.
Gears & motor pinions
19T Pinion Gear, model accessory, M0.6
303505049€5.69
This 19T pinion gear is a compact drivetrain part for model applications that use module M0.6 gearing. Its 19 straight teeth mesh with the matching gear stage to pass motor rotation into the transmission, making it a functional choice when a specific tooth count is needed in the drive layout. The dark metal gear body is shaped for shaft mounting, with a central round bore and a side set-screw hole visible on the part. The top surface is marked with 19, which helps distinguish this version from other tooth counts during maintenance or parts sorting. As a small mechanical component, the pinion sits at the point where motor output meets the rest of the drivetrain, so the tooth count directly relates to the gearing combination used in the model. It fits naturally into workshop tasks such as replacing a worn pinion, restoring a compatible drivetrain, or keeping a matching spare ready for service intervals. On the bench, the compact form and visible marking make it straightforward to identify alongside other transmission parts and gearing options. Warning! Not suitable for children under 14 years.
Gears & motor pinions
20/21T Pinion Gear Set, RC motor accessory, aluminum
300050356€9.99
This 20/21T Pinion Gear Set is a compact drivetrain upgrade for compatible RC chassis, pairing 2 aluminum pinions with 2 grub screws for secure mounting on the motor shaft. The 20-tooth and 21-tooth options give a clear gearing choice when replacing worn parts or adjusting the drive layout for a specific chassis setup. The machined aluminum construction keeps the focus on precise tooth engagement and clean fitment in model drivetrains that use module 0.6 gearing. One pinion is marked 20 for quick identification during setup, which helps separate the two ratios at the workbench. The set is intended for a wide spread of Tamiya platforms including M-05, M-05 PRO, M-05 ver.II PRO, M-06, M-06 PRO, WR-02, WR-02G, WR-02CB, GF-01, GF-01TR, GF-01CB, G6-01, G6-01TR and TB-05 PRO. It also supports CC-01 with 20T only, plus TA06, TA06 PRO, TA06 MS and TC-01 with 21T only. Additional chassis-specific notes are defined for several applications: DF-02 is used with 53703, F104PRO II is used with 51609, and TA07 MS is used with 51356, 51423 and 51548. That makes the set a practical spare or tuning part for keeping compatible RC cars running with the correct motor pinion combination. Warning! Not suitable for children under 14 years.
Axes & drive shafts
37mm SwingShafts, RC spare part for XV-02
300051700€16.19
These 37 mm SwingShafts are a focused RC spare part for keeping compatible chassis setups running cleanly and consistently. Designed for the XV-02 chassis, they replace worn swing shafts in the assembly universal area, where accurate fit and free movement matter to drivetrain response and stable operation during repeated running sessions. Each shaft is marked A • 37 and the set supplies 2 matching parts for the same specified length. The black rod form with metal inserts at both ends reflects the compact mechanical role these parts play inside the chassis assembly. On TT-02 based cars, the shafts can also be used alongside Item 54623 and 51444 for defined compatibility. Combined with Item 54874, they also allow a wider camber angle adjustment range on the TT-02 chassis, opening more setup latitude for fine tuning suspension geometry. This kind of replacement suits regular workshop maintenance, rebuilds after heavy use, or planned setup changes between chassis configurations. In a tuning session, fresh shafts can restore precise movement in the relevant assembly area, while in a parts box they serve as a chassis-specific option for XV-02 and selected TT-02 builds.
Axes & drive shafts
39mm Drive Shaft Set, RC spare part for TT-01E
300050883€12.99
This RC spare part set provides 2 drive shafts in a 39 mm format for selected Tamiya chassis. Designed for TA-01, TA-04, TA-05 and TT-01E platforms, the shafts sit in the drivetrain where rotating assemblies need a compact link that can keep transmitting power while suspension parts move through their travel. Each shaft uses a straight center section with rounded ends and cross pins, a dogbone-style layout commonly used to connect outdrives and wheel-side drive components. That shape allows the shaft to articulate inside the drivetrain rather than acting as a fixed rod, which matters when a chassis is cornering, accelerating or running over uneven surfaces. The 39 mm dimension is the key fit point here, so matching the stated length is essential when replacing worn or missing drivetrain parts. Supplied as a 2-piece set, the pack suits paired servicing work without forcing a mixed left and right setup. In workshop use, these shafts fit naturally into rebuilds, maintenance sessions and parts-box planning for compatible touring car chassis. They also make sense as a trackside spare when a running session calls for a quick drivetrain refresh on TA-01, TA-04, TA-05 or TT-01E based models. Warning! Not suitable for children under 14 years.
Axes & drive shafts
3x23mm Turn-Buckle Shaft, RC spare part, 4 pcs
309805780€4.69
This set of 4 turn-buckle shafts in 3x23 mm format adds a precise replacement option for RC model maintenance and setup work. The metal shafts are threaded on both ends and use a compact central section that supports handling during installation, removal and adjustment inside a linkage assembly. Used in steering or similar connection points where exact length matters, turn-buckle shafts allow the assembly to be tuned by changing the effective linkage position rather than replacing the whole mechanism. The 3x23 mm specification is the key fit detail for matching an existing compatible build, and the pack of 4 provides a practical quantity for servicing paired linkage points or keeping matching spares on hand. The dark metallic finish and cleanly cut threads reflect the functional, workshop-focused character of the part. These shafts fit naturally into bench work such as replacing worn connectors, refreshing a running chassis or preparing a model for its next setup session. In a parts box, pit case or hobby drawer, a matched set of 4 helps keep compatible RC assemblies ready when a linkage needs a fast, like-for-like swap. Warning! Not suitable for children under 14 years.
Axes & drive shafts
44 mm TRF Half Cardan Shafts, RC spare part
300022104€23.49
These 44 mm TRF half cardan shafts are a focused RC spare part for double jointed shaft drivetrains, supplied as a 2-piece set for compatible on-road chassis. Paired with ball bearings, they help cut friction through the driveline and reduce speed loss when the car is cornering, supporting smoother power transfer during fast direction changes. The shafts are intended for builders maintaining or refining established racing platforms rather than changing the basic layout of a chassis. Compatibility is stated for the TRF420, TA08PRO, TRF420X and TA08R, giving a direct fit option across several Tamiya on-road designs. When fitted to the TRF421 chassis, the setup calls for item 51762 ball bearing set for universal shafts, item 51763 TRF421X front direct cups and item 51764 TRF421X differential joints. That combination defines the matching driveline parts needed for correct use on the TRF421 platform. In workshop use, a replacement set like this supports routine driveline service after wear or impact damage. It also suits chassis builds where low-loss cornering performance matters, especially in sessions that place repeated load on the front or rear transmission during technical laps.
Axes & drive shafts
44mm TRF L.F. Drive Shafts, RC spare part
300042362€22.49
These 44 mm TRF L.F. drive shafts are built for double cardan joint drivetrains that use swing shaft caps from Item 54921. The steel construction and fluorine surface coating focus on two key demands in RC driveline tuning: controlled movement at the joint and reduced friction where the shaft is working under load. Supplied as 2 matching shafts, the set supports a balanced left and right installation in compatible chassis layouts. A key update is the 10.8 mm needle pin section, which is 1 mm longer than on previous shafts. That extra length is specified to get more from swing shaft cap option parts, making these shafts a targeted upgrade for builders refining a double cardan setup rather than changing unrelated areas of the car. The LF44 marking shown on the shafts helps identify the part during maintenance or when several driveline options are kept in a pit box. In workshop use, these shafts suit rebuilds after wear, planned driveline updates, or a fresh parts selection for a compatible competition chassis. They are best matched with the stated cap system, where the longer pin section and low-friction coating can be used as intended in the assembled transmission layout.
Axes & drive shafts
45mm Drive Shafts, TRF421 spare part set
300042387€18.99
These 45 mm drive shafts for TRF421 are a focused drivetrain spare for model car maintenance, supplied as 2 matching parts for Low Friction Double Cardan Joint Shafts. The dark metal shafts are marked LF45 and use a straight shaft form with joint ends shaped for the matching assembly. At the shaft end, each part uses a 10.8 mm needle pin. This detail is specified to work together with Item 54921 Reinforced Swing Shaft Caps, with 2 pieces each for front and rear fitment. The compatibility note is narrow by design: these shafts are only for cars that use Item 54921, which keeps the replacement choice tied to the correct drivetrain layout instead of a broad universal fit claim. As a spare part set, the pair supports maintenance after wear in the transmission area and restores the intended shaft length of 45 mm on both sides. The 2-piece format suits workshop stock, scheduled rebuilds and targeted repairs on a TRF421 setup. In a bench session, the matched pair helps keep the drivetrain specification consistent when replacing both corresponding shafts in the same assembly. Warning! Not suitable for children under 14 years.
Axes & drive shafts
46 mm TRF Swing Shafts, RC accessory, aluminium
300051760€18.99
These TRF 46 mm aluminium half cardan shafts add a focused drivetrain upgrade for compatible RC chassis, combining low weight with a ball bearing mounted layout that helps the axle rotate with less friction. In running, that reduced drag supports steadier power delivery through direction changes, where speed loss at the shaft can affect how cleanly a car carries momentum. The set contains 2 lightweight 46 mm swing axles and is intended as a chassis-specific accessory rather than a universal fit part. The half cardan design suits drivetrain maintenance, replacement work and targeted tuning where the shaft assembly is a key wear point. For TRF421X use, the specification names compatibility with ball bearing set 51762 and differential joints 51764 when the shafts are installed on the TRF421 chassis 42384. That combination gives a clear reference for planning a matching drivetrain setup instead of mixing unspecified parts. On the bench, the defined 46 mm length helps identify the correct shaft format before installation. During track use, the ball bearing mounted construction supports smoother axle movement in repeated corner entries and exits, where friction control matters most in a responsive RC drivetrain. Warning! Not suitable for children under 14 years.
Axes & drive shafts
A-Parts Axlehousing CC-01, spare parts set
300005519€22.79
A-Parts Axlehousing CC-01 is a spare parts set for the CC-01 platform and is listed as parts for 58132. The black injection-molded runner carries several unused structural components in one frame, including axle housing style sections and mounting pieces that support a clean replacement job when original parts need to be swapped. The molded layout keeps each piece attached until removal, which helps with identification before assembly and reduces mix-ups between similar shapes. The visible parts include long housing sections, bracketed elements and a larger case-like component, all formed with mounting holes and connection points that suit chassis or drivetrain installation. Because the pieces come as a matched set on one sprue, builders can replace damaged sections with components produced together rather than mixing unrelated leftovers from a parts box. This kind of spare set fits naturally into bench maintenance, rebuild work and parts sorting between running sessions. When a CC-01 chassis needs fresh housing components after wear or breakage, the set provides the specific molded forms needed to return the assembly to working order.
Gears & motor pinions
BB-01 48 Pitch Spur Gear 86T, RC spare part
300051714€4.59
The BB-01 48 Pitch Spur Gear 86T is a dedicated RC spare part for drivetrain setups that use a 48 pitch gear standard. Its circular toothed form and 86-tooth count define how it meshes with the matching pinion, making it a precise choice when a worn transmission part needs replacement or a specific gearing ratio is required for a build. This pack contains 1 spur gear. The part is intended for use with a 48 pitch pinion gear, so the tooth profile stays within the same pitch system across the gear mesh. That matters during maintenance and rebuild work, because matching pitch standards help the teeth engage correctly during rotation. The gear is shown as a molded component with a central mounting hole and reinforced face structure, details that support its role as a fitted mechanical part rather than a general workshop accessory. In practical use, the gear suits bench repairs, scheduled part changes and drivetrain refreshes on various R/C cars that accept this specification. When an RC chassis calls for an 86T spur gear in 48 pitch format, this part provides a direct, clearly defined replacement to keep the transmission setup on the intended gearing standard.
Axes & drive shafts
BB-01 D-Parts Suspension Arms, chassis spare set
300051713€12.79
The BB-01 D-Parts suspension arm set supplies the core chassis pieces that guide wheel movement at both the front and rear of a BB-01 build. With 2 front arms and 2 rear arms in the pack, the set supports a matched replacement across both ends, keeping the suspension layout consistent when worn or damaged parts need changing. Each arm is molded in glass fiber-reinforced nylon, a material choice suited to detailed chassis parts with hinge-pin mounts and outer pivot points. The shared right and left component shape reduces sorting during maintenance, since the same form is used on both sides. The included D-Parts for the BB-01 chassis focus on the mechanical areas that control suspension travel and the connection points around the wheel assemblies. This set fits workshop use, routine upkeep, or a rebuild after hard off-road sessions with a BB-01 machine. It also works as a practical spare to keep alongside other chassis parts, ready for quick replacement when the front or rear arm assemblies need attention.
Axes & drive shafts
BB-01 Dogbone Shafts, RC spare part, steel
300022068€18.99
These BB-01 Dogbone Shafts are a dedicated steel spare part for the BB-01 chassis and supply a matched pair for drivetrain service. The 2 shafts use the classic dogbone layout, with a pinned ball end on one side and a cup-style joint end on the other, so rotational force can pass between connected drivetrain parts while suspension movement changes the working angle. Crafted in carbon tool steel, the shafts focus on the part of the drivetrain that sees repeated motion under load. The black metal finish and the identical left and right pieces shown in the set make them suited to a like-for-like replacement when an existing pair needs renewal. As a chassis-specific component, the fitment stays tied to the BB-01 platform rather than a broad universal range, which helps keep maintenance accurate and parts selection straightforward. On a bench build, repair session or routine drivetrain refresh, this 2-piece set covers the shaft pair in one pack. It suits keeping a running chassis in service, replacing worn transmission links, or preparing spares for future maintenance on BB-01 based RC vehicles.
Axes & drive shafts
BB-01 Front Upright Set, RC spare parts, 2 pcs
300051712€7.19
The BB-01 C-Parts front upright set supplies 2 replacement components for the front end of a BB-01 chassis, giving RC model maintenance a direct way to renew a key mounting area. Each upright is molded in glass fiber-reinforced nylon, a material choice that suits parts handling steering pivot loads, wheel support points and repeated workshop fitting. The set uses the same component shape for right and left, which simplifies parts identification when a front corner is being rebuilt. The large circular opening in each upright forms the bearing seat area, while the molded mounting points connect with the surrounding chassis hardware. As C-Parts for the BB-01 platform, these pieces belong to the chassis structure itself rather than to bodywork or trim, making them relevant for repair, upkeep and keeping an existing build in running condition. On a bench setup, the pair can replace worn, damaged or missing originals during a front-end refresh on a BB-01 model. The 2-piece format also suits keeping matching spares on hand for routine service, especially when steering and wheel support components need to be exchanged as a pair.
Axes & drive shafts
BB-01 T Parts, rear suspension mount set
319225237€14.29
The BB-01 T Parts rear suspension mount set is a focused replacement and maintenance set for the specified suspension area, giving builders the exact molded shapes needed for work on the rear mounting section. The sprue format keeps the components together in one organized frame until removal, which helps with part identification before fitting begins. The visible layout includes multiple molded pieces in black and dark gray, with each shape formed for a technical role within the assembly rather than as a generic mixed parts pack. Numbered positions on the runner support orientation during workshop handling, and the molded frame format helps keep smaller connectors and bracket-style pieces grouped before installation. This makes the set useful when a damaged mount section needs renewal or when a build calls for the named BB-01 rear suspension area to be rebuilt with matching parts. On the bench, the set suits careful repair sessions, planned maintenance, or keeping key replacement parts ready alongside an existing BB-01 build. It also works well as workshop stock for model owners who prefer to keep the specified suspension mount section serviceable with the correct dedicated parts.
Gears & motor pinions
Bevel Gear Differential Set, RC spare part kit
300050602€5.99
This bevel gear differential set is a drivetrain spare part kit for selected RC chassis, built around the internal mechanism that distributes drive through a differential assembly. Supplied as a kit version, it provides 8 pieces for differential service on compatible platforms and suits repair work that focuses on the gear internals rather than the complete chassis. The set is specified for CR-01 and DT-02 chassis, making it a targeted choice when those platforms need matching replacement parts in the differential area. The included contents are 1 bevel gear differential set with 8 pieces. Studio imagery shows the internal layout clearly, with larger bevel gears, smaller mating gears, a 3-armed carrier and 2 flat washers or shims, all centered on the gear action inside the assembly. That component mix supports rebuilds where worn or damaged internal differential parts affect drivetrain function. In workshop use, this kind of set suits routine maintenance, repair after heavy running, or a planned refresh of the axle internals on a compatible chassis. It is not available for XB models, so the fit remains tied to the listed chassis platforms and their matching differential setup. Warning! Not suitable for children under 14 years.
Axes & drive shafts
Bevel Pinion Gear, spare part for model drivetrain
305455040€3.59
This bevel pinion gear is a dedicated spare part for model drivetrain service, built to pass rotational force through an angled gear interface inside a transmission assembly. The compact metal component combines a toothed upper edge with a conical body, making it suitable for mechanical layouts where direction changes within the drive line are required. Reinforced rib-like shaping along the gear body adds structural definition to the part itself, while the central mounting opening is formed for installation on a shaft or axle. That layout supports correct positioning within the surrounding mechanism and helps restore clean meshing when an original gear shows wear or damage. Supplied as 1 individual gear, it suits selective replacement work where only the affected transmission element needs to be exchanged. The plain silver-gray finish keeps the mechanical form easy to identify during maintenance and parts sorting. In workshop use, this spare gear fits repair jobs on model assemblies that rely on compact internal power transfer between connected drivetrain parts. It also serves as a practical replacement to keep an existing build in running condition after wear in a heavily used transmission section. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Bevelgear Set, model spare parts for drivetrain
319440510€5.19
This bevelgear set brings the key transmission parts needed for focused drivetrain maintenance on compatible model assemblies. The set contains 5 metal gears: 2 larger bevel gears with central bore openings and 3 smaller pinion-style bevel gears with short shafts. Their angled teeth are made to mesh at intersecting shaft positions, a layout commonly used to redirect rotary motion through a compact gearbox section. The combination of larger hub gears and smaller pinions supports replacement work where worn or damaged gear teeth can affect smooth running. Because bevel gears transfer motion across a change in shaft direction, they are suited to mechanical areas where drive needs to turn through an angle rather than continue in a straight line. The silver-gray metal construction gives each gear a clearly defined tooth profile and a technical finish that matches the functional role of these parts. Compatibility is stated for BB18, BB19 and BB20, with reference to 58618 Mt.Bee. On the workbench, this set suits planned servicing, targeted repair, or keeping essential transmission parts ready for a compatible model. The clearly differentiated gear sizes also help when matching the correct meshing pair during maintenance and reassembly. Warning! Not suitable for children under 14 years.
Axes & drive shafts
BT-01 C Parts, wheel axle spare parts set
300051732€6.99
The BT-01 C Parts set supplies original replacement components for the BT-01 chassis, centering on wheel axle and centre shaft parts used in the drivetrain. Differential cup joints, axle shafts, dogbone shafts and propeller shaft joints are grouped on one sprue, giving a direct source for matching parts when a running chassis needs repair or a rebuild calls for fresh hardware. These components handle connection and rotation transfer inside the BT-01 layout. Dogbone shafts link moving drivetrain sections, while cup joints and shaft ends sit at key handoff points between connected assemblies. Using original parts helps maintain the intended fit of the chassis design and keeps replacement work aligned with the existing BT-01 structure. The set is described as C Parts wheel axles and centre shaft, which makes its role within the chassis system clear for maintenance planning. This spare parts set fits workshop use, routine upkeep and targeted replacement after wear or damage in regular RC running. It also supports keeping a BT-01 chassis ready for the next rebuild session by covering several related drivetrain components in one pack. Compatible with the BT-01 chassis. Warning! Not suitable for children under 14 years.
Axes & drive shafts
BT-01 T Parts, RC spare parts, suspension arms
300051736€6.79
The BT-01 T Parts set is an original spare parts sprue for the BT-01 chassis, bringing together key structural pieces used around the suspension and body mounting areas. Molded in black and supplied as a single T runner, the set gives a direct source for replacing worn, damaged or missing chassis parts while keeping the fit aligned with the BT-01 platform. Alongside suspension arms, the sprue carries body mounts, bumpers and damper shafts, plus further related pieces formed as part of the same runner. The image layout shows mirrored left and right components, support posts, mounting sections and smaller braces, which helps identify each part before installation. This kind of grouped spare set is useful when several connected areas need attention at once, rather than replacing only one isolated piece. As an original spare part from Tamiya, it is intended to match the chassis design named in the data rather than serve as a universal RC car part. On the bench, the set suits routine maintenance after repeated running sessions, impact damage or a rebuild of a BT-01 chassis. It also helps keep a parts box stocked with core replacement pieces that are often needed around suspension and body support points. Warning! Not suitable for children under 14 years.
Gears & motor pinions
C-Parts Gearboxguard, model spare parts for CC-01
300005521€15.79
C-Parts Gearboxguard for CC-01 supplies replacement molded components for drivetrain and chassis-area service on a compatible model build. The black sprue format keeps the individual sections together until trimming, making it easier to identify the required shapes during a repair session at the workbench. The set is presented as model spare parts rather than a complete kit, with molded guard, housing and fastening-area forms visible on the frame. Ribbed detailing, screw holes and cylindrical mounting posts support the mechanical role of the parts once fitted into the existing assembly. Several circular pieces and hexagonal cap-like forms add further replacement coverage for the same component group, which helps when an older build needs targeted maintenance instead of a full parts change. This format suits rebuilds after wear, damage or disassembly, and it also helps keep a CC-01 chassis in running condition with matching replacement sections on hand. AreBatteriesIncluded is stated as false in the data, and no battery is included with these spare parts.
Axes & drive shafts
CC-01 B-Parts, steering servo saver spare set
300005520€15.79
CC-01 B-Parts brings the steering and servo saver section together in one spare parts sprue, giving compatible builds a direct route back to clean mechanical function. The black injection-molded runner presents the parts in an organized layout, with larger mirrored pieces, smaller linkage forms and circular clips arranged for clear identification at the bench. This set is intended as replacement hardware for the CC-01 rather than as a complete vehicle kit, so the focus stays on the steering assembly where accurate fit matters most. Visible molded part numbers such as 8, 9, 10, 11 and 13 help distinguish the individual shapes during preparation. The runner format keeps each component attached until needed, which supports tidier handling while checking the required section against an existing build. Glossy black molded surfaces and crisp edges reflect the technical character expected from RC maintenance parts. On a repair bench, the sprue suits worn steering sections, missing servo saver pieces or a planned refresh of an older chassis. It also fits neatly into a spares collection for hobby work, where keeping the correct CC-01 steering parts close at hand can shorten downtime between rebuild sessions.
Gears & motor pinions
CC-01 G-Parts, spare parts set for 58132
309005422€17.29
CC-01 G-Parts for 58132 provide a focused spare-parts set for drivetrain service, centered on molded mechanical components used in rotational power transfer. The set brings together black injection-molded gear elements and related mounting parts that suit repair work on an existing compatible model. Visible components include multiple spur gears, bevel gears, a larger gear with an integrated vertical pinion, a round plate with screw holes, and additional small parts carried on a sprue frame. That combination points to gearbox or differential-related functions where meshing teeth, axle positions and cover placement all need to match the original layout. The larger geared part with integrated pinion supports a compact transfer step within the mechanism, while the bevel gear forms indicate angled drive movement inside the assembly. The round plate adds a fitted structural piece rather than loose hardware, helping restore the intended arrangement of the surrounding mechanism. On the bench, this set suits planned maintenance, wear-related replacement, or the completion of a drivetrain rebuild when original molded parts are no longer usable. It also works well as workshop stock for model owners who keep compatible mechanical spares ready for future service on 58132-based running gear. Warning! Not suitable for children under 14 years.
Axes & drive shafts
CC-01 Universal Joint, model accessory for Pajero
304135042€15.99
The CC-01 Universal Joint is a dedicated model accessory for Pajero 58132 and serves as a replacement drivetrain part where a precise rotating connection is needed. Its universal-joint design allows torque to pass between connected parts even when the angle changes, which is important on a chassis layout that moves through steering and suspension travel. Used during maintenance or repair, this component helps bring a worn drivetrain area back to a defined mechanical fit. The clear CC-01 designation keeps the application focused on the matching platform, while the Pajero 58132 reference identifies the intended model directly. That makes part selection more straightforward when servicing an existing build rather than replacing larger assemblies unnecessarily. As a single-purpose spare part, it suits bench work that focuses on keeping the drivetrain operating cleanly and consistently. In a workshop setting, the joint can be fitted during routine overhaul after extended running or when a damaged coupling starts to affect smooth rotation. It also works as a practical stock spare for model owners who maintain a CC-01 Pajero 58132 and want the correct replacement ready for the next service interval. Warning! Not suitable for children under 14 years.
Axes & drive shafts
CC-02 SS Adjust Tie-Rod Set, chassis accessory
300054929€23.99
The CC-02 SS Adjust Tie-Rod Set adds a more tunable steering linkage to compatible CC-02 chassis cars by replacing the standard rigid molded link with stainless steel turnbuckle shafts. That change brings toe angle adjustment into the setup, allowing the chassis to be dialed in with greater precision for different running conditions and handling preferences. The set includes 1 x 104 mm stainless steel tie-rod, 1 x 53 mm stainless steel tie-rod, adjusters, and small attachment parts. The turnbuckle shafts feature hex adjustment sections, so length can be changed with a wrench as shown in the set documentation. This mechanism makes it possible to alter the linkage length directly through the shaft rather than removing and replacing a fixed rod. Stainless steel construction gives the main rods a durable metal format suited to repeated setup changes on the chassis. Installed in place of the standard kit linkage, the set supports fine setup work when steering response needs a more exact toe setting than the stock molded part allows. It suits bench tuning, rebuilds, and upgrade work on CC-02 based builds where adjustable linkage geometry is part of the chassis setup. Warning! Not suitable for children under 14 years.
Axes & drive shafts
Cup Joint Universal Shaft for TT-01 DF-02
300053790€21.29
This Cup Joint Universal Shaft is a drivetrain spare part for TT-01 and DF-02 chassis setups, built to work at the gearbox in combination with an assembly cardan shaft. The pot joint design is intended to suppress drive losses, supporting smoother running when the drivetrain is under power. The set contains a left and a right part, giving the specified pair needed for the matching drivetrain layout. Its application is clearly defined for use with the DF-02 Assembly Universal Shaft 53791 or the Assembly Universal Shaft for TT-01 and TA04 53792. That makes it a focused choice for maintenance, replacement, or a driveline setup built around those universal shaft systems. The compact metal parts are shaped for precise fit within the transmission area, where clean engagement matters for consistent rotation. On the bench, this kind of component belongs in rebuilds, wear-part replacement, or a planned drivetrain update on compatible chassis. In running use, the gearbox connection and universal shaft pairing support a more fluid transfer of drive through the system, especially where a correctly matched left and right set is required. Warning! Not suitable for children under 14 years.
Axes & drive shafts
D-Parts F/R Upright, model spare part, 1 pc.
300005296€14.49
D-Parts F/R Upright is a model spare part for selected Tamiya vehicle builds and is supplied as 1 piece. The molded black component is shaped for front and rear upright use, making it a practical choice when an original part from a compatible chassis setup needs replacement during maintenance or repair. The part is specified for compatibility with 58321, 58232 and 58256. Its form combines mirrored upright sections with circular housings, angled support arms, fastening holes and molded connection points in a single unit. That layout matters during repair work because the geometry of an upright part affects how surrounding running gear components line up and mount. Replacing a worn or damaged section with the correct designated part helps restore the intended fit within the assembly area. This spare part suits workshop stock for ongoing model upkeep, rebuilds after heavy running, or the completion of an older chassis that needs the original designated component. Kept alongside other maintenance parts, it supports faster repairs when a compatible model returns to the bench for service or parts replacement.
Axes & drive shafts
DB-01 Fluorine Coated Suspension Balls, RC parts
300053709€16.79
DB-01 Fluorine Coated Suspens. Balls(8) is a suspension hardware set for RC chassis tuning and maintenance. The fluorine coating reduces friction between each suspension ball and its mount, which supports more fluid suspension movement when the chassis changes direction, settles into corners or reacts to surface input. The scope of delivery contains 8 balls for wishbone shafts, making this set suitable for replacing worn contact points with matching hardware across the suspension assembly. Compatibility reaches across several Tamiya chassis families: TA06, TA06 PRO, TA06 MS, TB-03 VDS and TA05 ver.II use these balls with 54064-54074 and 54171-54175. FF-03, FF-03 PRO, TB-03, TB-04 and TB-04 PRO use them with 54064 to 54074. M-07 CONCEPT and M-08 CONCEPT use them with 54760, while TC-01 uses them with 54760 and 54787. This suspension set suits regular workshop servicing, chassis refreshes and targeted setup work where smooth ball-to-mount movement matters. It also fits neatly into a spares box for track days or bench maintenance, with 8 matching pieces ready for the specified chassis applications. Warning! Not suitable for children under 14 years.
Gears & motor pinions
DB-01/TRF501X Pinion Gear 24/25T 48DP Set
300054218€16.79
The DB-01/TRF501X Pinion Gear 24/25T 48DP set adds a focused drivetrain tuning option to compatible RC chassis with 2 metal pinion gears in 24T and 25T sizes. The 48 pitch format and newly designed tooth profile are intended to reduce noise and friction loss, supporting a cleaner mesh and a smoother running feel during track sessions, maintenance work or ratio changes. Each gear uses 2 grub screw attachment holes, so the fastening position can be selected during installation on the motor shaft. The set also comes with 3 grub screws and an L-shaped hex key for fitting and adjustment. This makes the set useful both as a replacement for worn drivetrain parts and as a practical gearing option when refining acceleration, response or running characteristics on a supported chassis. Compatibility covers DB01-Chassis, DB02-Chassis, DN-01-Chassis, TD2-Chassis, TD4-Chassis, TRF201-Chassis, TRF201XMW-Chassis, TRF211XM-Chassis and TRF502X-Chassis. For TD2-Chassis and TD4-Chassis, use with 22031 is required. On the bench, the 24T and 25T choice allows quick comparison between 2 gearing steps while keeping the same 48DP standard across the setup. Warning! Not suitable for children under 14 years.
Gears & motor pinions
DB-01/TRF501X Spur Gear, RC spare part, 91T 48DP
300051314€6.99
The DB-01/TRF501X Spur Gear 91T 48DP is a dedicated RC spare part for compatible drivetrain setups, combining a 91-tooth count with a 48 pitch tooth profile for precise transmission matching during maintenance or repair. Built for use with the DB01 and TF503 chassis named in the data, it gives the drivetrain a clearly specified replacement component rather than a generic gear. The 91T layout determines the driven gear size within the transmission, while the 48DP format identifies the fine tooth pitch used for correct meshing with the matching pinion. That makes this gear relevant when restoring the original gearing arrangement on a compatible chassis after wear, damage or routine workshop service. As a model supply in the Models & Accessories range, it suits bench work focused on drivetrain upkeep rather than cosmetic changes. The listed designation DB-01/TRF501X also helps place the gear within specific RC platform families. In practical use, this spare part belongs in the workshop alongside other transmission service components for compatible off-road chassis builds. During maintenance sessions, it supports a straightforward parts swap that keeps the drivetrain specification aligned with the stated 91T 48DP format for continued running on the correct platform. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DF-02 B-Parts Upright/Steering Arm Spare Set
300051076€14.29
DF-02 B-Parts Upright/Steering Arm is a chassis spare set for the DF-02 and TT-02B platform, built to restore key steering and wheel support points with matching replacement components. The black molded parts are arranged as 4 sprues with 20 pieces, making this set a practical choice when worn or damaged suspension and steering sections need to be renewed. The upright and steering arm shapes handle pivot and linkage mounting duties within the front end layout, while the mirrored forms support correct left and right installation. Multiple mounting holes are formed into the parts for chassis attachment and linkage connection. The set also includes 4 wheel nuts and 8 washers, adding the fastening hardware needed for the relevant assemblies. As a dedicated spare set, it suits routine maintenance, repair work after running sessions, or keeping workshop stock ready for future rebuilds. On the bench, the parts help bring a DF-02 or TT-02B chassis back into running condition with matching replacement geometry instead of mixed substitutes. For hobby maintenance, rebuild projects, or replacing damaged steering components after track use, this set keeps the fit focused on the specified chassis types. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DF-02 Drive Shaft Set, RC spare part, 64 mm
300051081€13.29
This DF-02 Drive Shaft set provides a direct spare part solution for the DF-02 chassis and includes 2 drive shafts with a stated length of 64 mm. The matching pair format suits maintenance work where both sides of the drivetrain need the same part specification, keeping the assembly consistent across the axle setup. Each shaft follows a straight cylindrical form with ball-shaped ends and cross pins for connection at the mounting points. That layout is designed for mechanical transfer within the drivetrain while matching the geometry required by the DF-02 platform. The black finish and compact rod profile make the parts easy to identify during a rebuild or parts check. As replacement components rather than a general accessory, these shafts are intended for the named chassis application instead of broad multi-model use. The set fits routine workshop tasks such as replacing worn transmission links during servicing, refreshing a stored chassis before running, or keeping matching spare parts ready for a future repair. In a bench setup focused on DF-02 maintenance, the 2 included shafts cover a complete paired change with the specified 64 mm dimension. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DF-02 E-Parts, spare parts set, wheel axle
309005756€9.79
The DF-02 E-Parts set provides replacement components for the wheel axle and differential joint area, giving compatible model maintenance a direct route to restoring key drivetrain connections. Black moulded parts are supplied on sprues, with the axle-related and joint-related sections grouped for clear identification before removal and fitting. This spare parts set is designated as E Parts for 58328 and is intended for focused servicing rather than broad replacement across unrelated assemblies. The visible component mix includes cylindrical axle-linked pieces, connector forms and longer structural elements that belong to the same parts tree. Keeping these pieces together on one runner helps confirm part shape and orientation during workshop preparation. The set format also suits repair benches where damaged drivetrain sections need matching replacement geometry from the original parts family. Used during maintenance, rebuilds or parts replacement after wear, the DF-02 E-Parts set supports continued running with the correct component group kept on hand. It fits naturally into a spares collection for model upkeep, especially when the axle and differential connection points need renewed parts to return a chassis to working order. Warning! Not suitable for children under 14 years.
Gears & motor pinions
DF-02 Metal Parts Bag A, model spare parts
309400152€30.49
DF-02 Metal Parts Bag A is a model spare parts set identified in the source data for 58328. The designation points to a defined replacement pack rather than a general accessory, making it a practical choice when an existing build needs the matching hardware group restored or completed. The stated metal construction gives this set a clear material identity, while the DF-02 naming keeps the part reference specific for workshop organisation. As a parts bag, it suits maintenance, repair and replacement tasks on a compatible build already in use. The source data places it in model supplies, which fits its role as a support component for an established model rather than a standalone vehicle or assembly kit. This also helps when sorting spares by platform and bag reference during bench work. On the work surface, a clearly named replacement pack saves time during upkeep because the part group is already narrowed to DF-02 Metal Parts Bag A for 58328. It works well as a stock spare for routine servicing, for completing an older build, or for replacing missing original metal components with the specified bag reference. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DF-02 Universal Shaft Assembly, RC drivetrain set
300053791€56.99
The DF-02 Universal Shaft Assembly is an RC drivetrain upgrade set built to cut friction where the axle moves through the steering angle. In place of a standard dog bone drive shaft, the universal joint layout keeps power delivery more direct while the front end changes direction, which helps the chassis carry drive more cleanly through bends and technical sections. The set contains 1 ball cardan shaft set with 13 pieces and is built around 2 universal shafts. Visible components include wheel axle parts, cross joints, pins, grubscrews, AW grease and a hex wrench for assembly. The shafts are marked 70, and the document notes grease application at multiple moving contact points in the joint and cup areas. The assembly is designed to be taken apart again, which allows consumable parts to be replaced when wear appears instead of discarding the full shaft unit. Fitment is specified for DF-02, DT-02, DT-03, DT-03T and TT-02B chassis with the matching cup joints listed in the data. On a buggy set up for repeated steering input, jumps and direction changes, this drivetrain layout supports a more consistent feel at the driven axle and gives maintenance-focused builders a clear upgrade path within compatible Tamiya chassis. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DF-03 D-Parts Rear Upright Hub Carrier Set
300051251€9.59
The DF-03 D-Parts Rear Upright Hub Carrier set is a chassis-specific replacement set for the DF-03 platform, supplying the molded parts used in the rear upright and hub carrier area. With 1 D parts tree and 6 parts in the box, it gives the build a direct source for the designated components when maintenance, rebuild work or part replacement is due. The set is focused on one defined chassis section rather than a mixed hardware assortment, which keeps part selection clear during workshop use. The molded layout on the runner helps identify each piece before removal and fitting, especially when comparing worn parts against fresh replacements. Because the set is tied to the DF-03 chassis, it suits repairs that need the matching geometry and mounting form for that platform. The rear upright and hub carrier area plays a key role in how the corresponding rear assembly is put together, so using the intended parts helps restore the specified structure of that section. On the bench, this set fits naturally into routine servicing, rebuilds after heavy running, or a planned stock of spare chassis parts. It also works well as a replacement pack to keep alongside a DF-03 model, so the required rear section components are on hand when a damaged part needs to be exchanged. Warning! Not suitable for children under 14 years.
Gears & motor pinions
DF-03 Gear Parts Bag, RC spare parts set
309400411€39.99
The DF-03 Gear Parts Bag for 58370 focuses on one of the most important working areas in an RC drivetrain: the differential. This spare parts set brings together the core service components needed when the original assembly shows wear, so the drive system can return to clean, controlled power delivery under load. The set is presented as a dedicated bag for the DF-03 and, based on the included contents, covers the internal differential hardware rather than general chassis maintenance. Visible parts include a large metal gear with shaft, a smaller metal gear, 2 black outdrives, 2 black differential housings or cams, 4 large shim washers, additional small shims and washers, 2 metal pins, 2 groups of ball bearings, 6 white bushings or spacers, 4 coil springs, and a tube marked Ball Diff Grease. That combination supports rebuild work, replacement of worn running parts, and fine adjustment of the differential stack. On the bench, the mix of gears, bearings, shims and grease gives a clear route for servicing a used transmission assembly or refreshing a stored chassis before the next run. As a model-specific spare parts bag for 58370, it also helps keep maintenance organised when a DF-03 build needs the correct drivetrain components close at hand. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DF-03Ra Assembly Universal Shaft RC Parts Set
300053792€35.49
The DF-03Ra Assembly Universal Shaft brings a serviceable drivetrain upgrade to compatible RC chassis, combining a ball cardan shaft layout with high-precision machining that reduces the stalling feel during steering and supports smoother cornering. In the workshop or at the track, the metal shaft parts, pins and couplers form a focused tuning set for driveline maintenance and response. The scope of delivery contains 1 ball cardan shaft set with 13 pieces. Visible set contents include 2 long shafts marked 39, joint hardware, pins, set screws, an L-shaped hex key and AW anti-wear grease for the moving contact points. The PTO shaft can be assembled and disassembled, which allows worn consumable parts to be exchanged instead of replacing the whole assembly. That serviceable layout helps keep the driveline working with the same intended action over repeated running sessions. Compatibility is specified for TT-02 chassis, TT-02D chassis, TT-02FT chassis, TT-01 TYPE-E chassis and TT-01D TYPE-E chassis when combined with the listed companion parts. This makes the set suited to targeted repair work, drivetrain upkeep and handling-focused tuning where steering load and cornering smoothness matter most. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Diff. Gear Bag Grasshopper Hornet Spare Parts
319115010€6.49
This spare parts set is made for differential service on compatible Grasshopper and Hornet RC models. Supplied as a 6-piece gear bag, it focuses on one specific drivetrain area and gives repair or rebuild work the matching gears needed for a direct replacement task. The set belongs to the model supplies range and is intended for maintenance rather than first-time vehicle assembly. By concentrating on the differential section, it helps address wear in a part of the drivetrain that affects power transfer during running. The bag format keeps the relevant gears grouped together for workshop use, whether the job involves replacing worn parts or refreshing an older compatible chassis. Compatibility is stated for Grasshopper and Hornet, so the set can be selected for those named models without adding unrelated universal-fit claims. On the bench, this kind of replacement set fits routine upkeep, targeted repairs and parts storage for future service work. It is a focused choice for RC model maintenance where the differential needs the correct matching gear components rather than a general mixed spares assortment.
Axes & drive shafts
DN-01/M-Ch. 1-piece Steel Front Axle & Hub
300022106€12.29
This 1-piece steel front axle and hub set brings a specific DN-01SR front-end layout to compatible chassis builds and parts replacement work. Taken from the DN-01SR Chassis Kit, Item 58761, it combines the axle and hub in one steel component group for builders working on matching front suspension assemblies. Compatibility covers the DN-01SR chassis as well as M-08 and M-07 platforms, making the set relevant for several established on-road chassis lines. The part can also be used in place of Item 54996, the M-Chassis Lightweight One-Piece Aluminum Axle & Hub Set, when a build calls for this steel version instead. Separately sold spacers and screws are required for installation. The designation DN-01/M-Ch. 1-piece Steel Front Axle & Hub keeps the application clear for workshop sorting and parts planning. In a maintenance setup, the set supports worn front-end parts replacement with a chassis-matched component. During a fresh build or a parts change, the stated compatibility with DN-01SR, M-08 and M-07 helps narrow fitment quickly and keeps the front axle area aligned with the intended layout.
Axes & drive shafts
Drive Shaft, RC spare part, steel, 45 mm
309805551€12.99
This RC spare part supplies 2 steel drive shafts at 45 mm length for model vehicle drivetrains that use ball differential drives. The shaft format matches Manta Ray and Fire Dragon applications named in the data, giving a direct way to replace worn drivetrain links while keeping the intended mechanical layout in place. Each shaft uses a long steel rod with formed ends that sit into the drivetrain connection points, where rotation is passed through the linked assemblies. The 45 mm measurement matters in this role because shaft length determines how the connected parts line up during running. With 2 identical pieces in the pack, both sides can be fitted with the same specification instead of mixing different lengths or constructions. The part is listed for bowling and ball differential drives, so the stated drivetrain type stays clear when selecting the replacement. This kind of spare part suits repair work, routine maintenance and the refresh of an older chassis that needs the original shaft format restored. It can also be paired with the matching ball cardan shafts named in the data when a compatible drivetrain setup is being completed with related components.
Axes & drive shafts
Drive Shaft, spare part set for 58087 model
309805370€13.99
This spare part set provides 2 drive shafts for model 58087 and focuses on one clear job: replacing the matching drivetrain components with the correct designated parts. The shafts shown combine a long metal rod with white end connectors and protruding metal pins, giving the assembly the connection points needed for the intended mounting position. As a dedicated replacement set, the value lies in fit and function for the specified model rather than in generic compatibility. The 2-piece format suits repairs where both corresponding shafts are changed together, and it also supports planned maintenance when worn drivetrain parts need renewal. The metal rod section forms the main shaft body, while the molded end pieces create the shaped interfaces required by the assembly. This keeps the repair focused on the exact component group named in the set. On the workbench, these drive shafts suit routine servicing, rebuilds after wear, or the completion of an unfinished model that is missing original running parts. For collectors and builders maintaining model 58087, the set supplies the exact replacement category needed for a clean, model-specific repair. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DT-02/03 Upright L/R, RC spare part set
300555059€10.19
The DT-02/03 Upright L/R is a dedicated RC spare part set for restoring the front end of compatible chassis builds. Supplied as left and right uprights, the set replaces the side-specific mounting pieces that support wheel assembly and connected steering or suspension movement during running. Its value lies in precise fitment for the DT-02 and DT-03 platform family, where a damaged upright can affect alignment and interrupt smooth operation. Replacing the affected parts with the correct upright pair helps bring the chassis back to its intended layout without changing unrelated assemblies. The compact parts format also suits the usual maintenance cycle of hobby-grade RC vehicles, where individual wear points are renewed as needed rather than swapping complete sections. For bench work, the set is easy to sort, store and match to the relevant repair task because the application is clearly defined in the designation. This spare part set fits naturally into routine buggy upkeep after repeated use, contact with track barriers or general wear in the front corner area. It also serves as a practical stock part in a workshop drawer, ready for scheduled maintenance or a direct replacement when a DT-02 or DT-03 chassis needs the correct upright on each side. Warning! Not suitable for children under 14 years.
Axes & drive shafts
DT-04 B Parts Uprights, chassis spare parts
300051755€8.99
The DT-04 B Parts Uprights set brings together molded replacement components for the new DT-04 chassis, making it easier to restore worn mounting points or replace damaged running gear with matching parts. Black resin pieces for the front and rear sections keep the fit aligned with the original chassis layout, whether the workbench task is a targeted repair or a broader rebuild. Beyond the uprights, the set covers several key connection areas of the chassis. C-hubs support the front end structure, while damper stays provide the shock mounting sections used in the suspension setup. The steering linkage transfers servo movement through the steering assembly, and the servo horn forms the connection point between servo output and linkage movement. Hex hubs complete the wheel mounting area, so the set reaches across several mechanical zones instead of covering only one isolated part. This parts group suits maintenance sessions after heavy running, rebuilds of a used chassis, or keeping workshop stock ready for future repairs. It also helps when a fresh DT-04 build needs replacement pieces on hand for the steering, suspension and hub areas most likely to see regular service. Warning! Not suitable for children under 14 years.
Gears & motor pinions
F Diff. Joint L & R, model spare parts for 58370
309808059€20.99
F Diff. Joint L & R for 58370 supplies 2 dedicated spare parts for the front differential area, with one left and one right version matched to the named model reference. The black molded pieces show a technical, component-led form with flanged heads and split forked ends that suit connection points in a mechanical assembly. As model spare parts, these joints are intended for targeted maintenance rather than general upgrading. The paired L and R layout matters where the front drivetrain uses side-specific geometry, allowing the correct part to sit in the correct position instead of forcing a universal substitute. The visible shape of each piece supports that role: the cylindrical body forms the main connection section, while the forked end is made to interface with adjoining moving parts in the assembly. This keeps the focus on fit, alignment and restoring the original mechanical layout of 58370. On the workbench, the set suits planned servicing, replacement of worn front differential components, or completion of an existing build that needs the specified joints. The 2-part format keeps both sides of the front assembly covered in one pack, making it easier to match left and right positions during installation. Warning! Not suitable for children under 14 years.
Gears & motor pinions
F101-F104 G-Parts Spur Gear Set, RC spare parts
300050506€10.29
The F101-F104 G-Parts Spur Gear M0.6/63Z set is a drivetrain spare-parts pack for selected RC chassis, centered on a 63-tooth main gear with module 0.6 gearing. It gives a direct replacement route for wear parts in the transmission area and keeps compatible running gear ready for service sessions, rebuilds and routine maintenance. The set is specified for F104PRO II, F104W, F104 and F103GT chassis. For the F104PRO II chassis, the data states that only the 63T06 spur gear is used. Scope of delivery contains 1x G-Parts tree with 7 pieces, grouping the gear and related molded components in one pack for organized parts handling at the bench. The black molded parts shown in the set include the large spur gear and smaller matching pieces shaped for mounting and spacing within the assembly. This spare-parts set suits drivetrain refresh work after regular use, replacement during a rebuild, or keeping key transmission components on hand between running sessions. In a workshop setup, the defined chassis compatibility and exact 63-tooth specification make it easier to match the correct gear set before installation. Warning! Not suitable for children under 14 years.
Axes & drive shafts
F103 Turnbuckle Tie Rod Set, RC spare parts
300053150€14.99
The F103 Turnbuckle Tie Rod Set brings adjustable linkage hardware to the F103GT chassis in a compact 20-piece spare parts pack. At the center are 2 turnbuckle shafts in 3 x 42 mm size, built to create a tunable connection within the steering or rod linkage layout. A reverse screw on 1 side of each shaft allows the rod length to be changed by turning the shaft itself, which helps when alignment needs fine correction during maintenance or reassembly. Alongside the shafts, the set provides 6 adjusters and 4 cushion balls in 5 mm size, plus the related small hardware for mounting and connection. This combination supports the pivoting and threaded joints used in RC chassis linkages, where clean fit and measured adjustment matter more than fixed-length parts. The included parts are suited to replacing worn linkage components or restoring a chassis with matching hardware dimensions already specified in the set. On the bench, the set fits naturally into steering service, linkage renewal or a parts refresh for an F103GT build. The compact format also makes it useful to keep with workshop spares, so the required rods, adjusters and joint hardware are ready when a setup change or replacement is needed. Warning! Not suitable for children under 14 years.
Axes & drive shafts
F104/F103 Special King Pin, model spare part
300053119€4.49
The F104/F103 Special King Pin is a dedicated spare part for compatible F104 and F103 chassis, intended for maintenance, repair and ongoing setup work. As a king pin, it belongs to the front suspension area where precise alignment between steering and suspension components matters during rebuilds and replacement work. This part is supplied for the F104/F103 platform rather than as a generic hardware piece, which helps keep servicing focused on the correct chassis family. It suits replacing a worn or damaged king pin during routine maintenance, or keeping a matching spare ready in workshop storage for future repairs. The compact format also fits neatly into parts boxes and bench organisers used for model upkeep, making it easier to separate chassis-specific hardware from general screws and fittings. On the workbench, the part supports clean, direct replacement when a front-end rebuild is needed after running sessions or inspection. It also fits tuning and restoration tasks where the original suspension layout of an F104 or F103 chassis needs the correct replacement component rather than an improvised substitute. Warning! Not suitable for children under 14 years.
Gears & motor pinions
FF-03 Spur Gear 68T M0.6, RC spare part
300051423€4.59
This spur gear brings a defined 68T tooth count and M0.6 pitch to compatible RC chassis, giving the drivetrain a concrete replacement part for service, repair and setup work. As a single main gear, it suits bench maintenance where a worn transmission component needs to be swapped for the correct specification. The part is listed for FF-03 chassis and FF-04 EVO chassis, and it also covers a broad compatibility range across TD4, TD2, TA06, TA06 MS, TA06 PRO, TA07 PRO, TA08 PRO, TT-02, TT-02 TYPE-S, TT-02 TYPE-SR, TT-02D, TT-02RR, XV-02PRO, XV-01, XV-01 PRO and XV-01T chassis. That spread makes it relevant for racers and builders managing several platforms within one workshop. On TT-02 based cars, use can also apply to vehicles equipped with 54500. For TT-02RR chassis, the gear is listed as kit standard equipment. In practical use, this is the kind of transmission part kept on hand for routine rebuilds, drivetrain refreshes and chassis-specific parts planning. The single-piece scope of delivery keeps the replacement straightforward when preparing a compatible touring, front-wheel-drive or rally platform for the next maintenance session. Warning! Not suitable for children under 14 years.
Axes & drive shafts
Front Upright Set, model spare parts, MB10/11
319808262€18.49
This front upright set supplies 2 matching metal parts for MB10/11, with left and right versions shaped as a mirrored pair for front-end replacement work. The silver finish and compact machined form give each piece a clean mechanical look, while the curved arm and pivot section point to a defined mounting role within the assembly. Each upright shows a circular attachment hole at one end and a rounded housing at the other, creating the connection points needed for a controlled mechanical fit. A vertical cylindrical shaft extends from each part and ends in a threaded screw tip, adding a fastening detail that supports installation into the intended front assembly position. One housing appears to carry internal threading, indicating that the two sides are not interchangeable and are made for their specific left or right placement. This set suits repair, maintenance or parts replacement on a compatible MB10/11 model where worn or missing front hardware needs a like-for-like component shape. Kept as workshop spares or fitted during a rebuild, the pair provides the dedicated geometry needed for accurate front-end restoration. Warning! Not suitable for children under 14 years.
Axes & drive shafts
Front Upright Set, RC spare part for Tamiya chassis
300051352€6.19
This front upright set supplies 2 steering knuckles for the front axle of compatible RC chassis, giving the steering assembly the exact mirrored left and right parts needed for repair or routine maintenance. The shape with circular axle openings and multiple mounting points supports correct integration into the front suspension area, where precise alignment matters for wheel guidance and steering movement. The set is listed for a wide range of chassis platforms: FF-04 EVO, FF-03, FF-03 PRO, TA07 MS, TA07 PRO, TA06 MS, TA06, TA06 PRO, TA05 Ver. II, TB-Evo.6 MS, TB-Evo.6, TB-05 PRO, TB-04, TB-04 PRO, TB-03, TB-03 VDS and TT-02 TYPE-S. That broad compatibility makes this pair useful for keeping several touring car and front-wheel-drive builds in running condition with one clearly matched spare. The scope of delivery contains 2 front steering knuckles from C-Parts TB-03. In workshop use, this pair suits worn, damaged or missing front uprights on supported chassis and helps return the front end to its intended mounting layout. It also serves as a practical stock spare for regular service between driving sessions, especially on platforms that share steering and suspension hardware. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Gear Bag for 58340, model spare gear set
309335432€7.19
This gear bag for 58340 brings the drivetrain back into service with 4 replacement parts shaped for geared power transfer. The set contains white injection-moulded components shown as 2 large gears, 1 smaller double pinion gear and 1 circular cover plate with 3 mounting holes, giving the gearbox area the core parts needed for a targeted repair. The larger gear with a raised cylindrical hub works alongside the second large toothed gear, while the smaller double pinion links motion between stages of the transmission. That layout points to reduction and transfer inside the gearbox rather than cosmetic trim, so the set is suited to maintenance where worn teeth, missing internals or damaged drive parts interrupt movement. The separate cover plate closes the assembly at the matching mounting points and helps return the parts to their intended position inside the housing. Used during a rebuild, service interval or parts replacement, this set supports focused work on the transmission section of 58340 without replacing unrelated assemblies. It also fits neatly into a spares collection for model maintenance, where keeping the correct gears on hand can shorten downtime between bench work and the next run. Warning! Not suitable for children under 14 years.
Axes & drive shafts
Gear Box Joint, replacement part for 43520
309804237€8.99
The Gear Box Joint set for 43520 supplies 2 matching replacement parts for a drivetrain connection point where accurate fit matters. The machined metal finish and compact cylindrical form suit technical model maintenance, helping restore a clean mechanical link in the gearbox area when an original joint is worn, damaged or missing. Each joint is shaped as a dedicated spare for use with model number 43520 rather than as a generic workshop component. The 2-piece format provides a matched pair for repair planning and parts storage, which is useful when both sides of a mechanism need the same connection standard. The metal construction supports a precise seating surface at the contact point, which matters in assemblies where connected parts need to meet cleanly. As a small drivetrain component, this set fits naturally into regular service work on running models and mechanical rebuilds. On the workbench, the pair can be kept ready for scheduled maintenance or used to replace a failed connection during a repair session. For model builders who maintain existing vehicles over time, dedicated spare parts like these help keep compatible assemblies operating with the intended hardware. Warning! Not suitable for children under 14 years.
Axes & drive shafts
GF-01 Full Ball Bearing Set, chassis accessory
300054924€39.99
The GF-01 Full Ball Bearing Set is a chassis accessory made to give GF-01 models a complete bearing upgrade with the exact quantities needed in one pack. The set contains 24 x 1150 ball bearings and 2 x 850 ball bearings, replacing the standard bearing arrangement at the rotating points across the chassis. By swapping in ball bearings for the kit standard plastic and metal bearings, the running gear can turn with less drag and a more consistent mechanical feel. The different bearing sizes cover the positions required by the GF-01 layout, so the set is built around the chassis rather than a generic assortment of parts. The compact metal components suit maintenance work, rebuilds and planned performance upgrades where efficient rotation matters. On the bench, the set supports a straightforward refresh of a used GF-01 runner or a more refined specification for a fresh chassis build. Once fitted, the smoother movement through the rotating assemblies helps the model make cleaner use of its available power during regular driving sessions.
Gears & motor pinions
Hard Joint Cup-Set Gear Differential Spare Part
300053218€14.99
This spare part set combines a differential output with a hardened cone differential for gear differential service on compatible model vehicles. The pairing suits focused drivetrain maintenance where the differential assembly needs renewal with the two named components supplied together. The hardened cone differential is the key technical element in the set, adding a wear-oriented replacement part for rebuilds and repair work. In a gear differential, this component supports the transfer of drive through the transmission while the differential output forms the matching connection point within the assembly. The scope of delivery is clearly defined as 1 differential output and 1 hardened cone differential, which helps when planning a direct replacement around the existing drivetrain layout. The set is intended as an accessory and replacement component rather than a complete model. On the workbench, this combination fits routine servicing, repair after drivetrain wear, or preparation of a compatible chassis for further running. It also suits parts storage for model maintenance, where a clearly specified differential set can be kept ready for the next rebuild. Warning! Not suitable for children under 14 years.
Axes & drive shafts
Left Upright Front, RC spare part with ball stud
300445169€6.99
This front left upright is a dedicated spare part for the Stadium Blitzer and is intended to restore a specific suspension or steering connection point in the front corner assembly. The molded piece combines a compact arm shape with a central round mounting hole, creating the defined pivot location needed for the surrounding mechanism to sit correctly. A brass-colored ball stud at one end adds the articulated connection point for the linked assembly. The upright also carries a silver metal shaft with a threaded tip, which provides the fastening point for installation into the matching front section. Reinforced ribs in the molded body support the shape of the part around the mounting area, while the white finish makes the component easy to identify during maintenance or parts sorting. Supplied as 1 piece, it is specified as the front left version rather than a universal side-to-side replacement. This kind of spare part suits focused repairs after wear, damage or a missing original component in the Stadium Blitzer. Kept in a workshop drawer or parts box, it supports routine maintenance and helps return the front assembly to its intended mechanical layout with the correct left-side geometry. Warning! Not suitable for children under 14 years.
Gears & motor pinions
M-05 Ball Bearing Set, chassis accessory, 18 pcs
300054179€41.49
The M-05 Ball Bearing Set is a chassis accessory made for M-05 machines and brings the full bearing count needed for a focused running gear update into one pack. With 18 metal ball bearings in 2 specified sizes, it supports smoother mechanical movement at the points where rotating parts meet, helping the chassis run with less drag during regular use. The set contains 6 x 850 ball bearings and 12 x 1150 ball bearings, matching the size combination stated for M-05 chassis compatibility. That size split makes the set useful for planned maintenance as well as for replacing worn bearings during a rebuild. In an RC chassis, ball bearings sit at key rotating points and reduce friction compared with basic bushings, which can help the drivetrain turn more freely and keep the response of the running gear more consistent. The silver-coloured metal finish reflects the precision-part character of the set and fits the technical look of workshop spares and tuning parts. On the bench, this bearing set suits routine chassis servicing, parts replacement after extended running, or preparation for a cleaner rolling setup before the next session. It also works as a practical stock part for M-05 owners who prefer to keep the specified 850 and 1150 bearing sizes ready for future maintenance.
Axes & drive shafts
M-05 C-Parts, suspension spare parts set
300051391€17.49
The M-05 C-Parts suspension spare parts set supplies the designated C section for several compact Tamiya chassis, making it a practical choice when suspension-related components need replacement during maintenance or repair. With 46 pieces on 1 parts tree, the set groups matching molded sections together for rebuild work on compatible RC car platforms. Compatibility covers M-06, M-06 PRO, M-05 ver.Ⅱ PRO, M-05, M-05 PRO and MF-01X chassis. That broad fit makes this set useful for workshops, spare parts storage and ongoing running repairs across more than one chassis type. The molded parts format also helps identify and separate the required sections before installation, which keeps rebuild work organized when replacing worn or damaged areas. Scope of delivery: 1x C parts, 46 pieces. This spare parts set suits routine servicing after track use, collision damage or part loss during disassembly. It also fits planned refresh work on an existing chassis, where keeping the correct designated section on hand can shorten downtime between maintenance sessions. Warning! Not suitable for children under 14 years.
Axes & drive shafts
M-05 F-Teile, spare parts set, wheel hub
300051393€9.39
The M-05 F-Teile set is a dedicated spare parts pack for compatible Tamiya chassis, supplying 12 replacement components for maintenance on running gear assemblies. The set is intended for M-06, M-06 PRO, M-05 ver.II PRO, M-05 and M-05 PRO chassis, making it a practical match when original parts need replacement after regular use. The included F parts are shown as black moulded resin components with multiple mounting holes, pivot points and axle or bearing openings shaped for their specific positions in the assembly. Left and right mirrored forms support correct placement during rebuilds, while the mix of upright, hub and small insert style pieces helps address wear in connected front-end areas. This kind of chassis-specific parts pack is useful when keeping an existing RC car in running condition rather than replacing a full assembly. On the bench, the set suits routine servicing, repair after contact damage, or preparation of a second chassis for use with the same platform family. It also helps maintain parts support across several related M chassis versions, which is useful for hobby setups that rotate between M-05 and M-06 based builds. Warning! Not suitable for children under 14 years.
Axes & drive shafts
M-05Ra F-Parts, RC chassis parts set
300051425€9.99
The M-05Ra F-Parts set is a dedicated RC chassis parts set for the M-05 RA chassis, centered on the upright front and rear area. With 21 pieces in 1 F-parts frame, it provides the specific molded shapes needed when a suspension or steering section has to be rebuilt with matching left and right components. The set contains black molded parts with multiple mounting holes, cylindrical pivot sections and forked connection points. These details matter during assembly because they define how links, axles and adjacent hardware sit in the chassis. The layout shown for the parts also includes small spacers, washers and connector plates, which support alignment and spacing in the assembled upright section. Rather than replacing unrelated sections, this set addresses one clearly defined area of the M-05 RA platform. That focused fitment suits maintenance after heavy running, accident damage or a full chassis refresh. It also helps when keeping a build consistent with the original M-05 RA configuration, using parts intended for that exact platform. The scope of delivery contains 1x F parts set with 21 pieces. Warning! Not suitable for children under 14 years.
Gears & motor pinions
M-07 Concept Spur/Counter Gear RC Spare Set
300051601€4.59
The M-07 Concept Spur/Counter Gear set is a model-specific transmission spare for M-07 Concept chassis cars, supplying the 2 molded gearbox gears needed for a full internal replacement. The set contains 1 main spur gear and 1 counter gear, each formed as a compound gear so the paired tooth counts work together inside the gearbox. The spur gear is specified as 37T/21T and the counter gear as 29T/23T. Those tooth combinations are the key mechanical detail of the set, because they determine how the gears mesh across the transmission stages in the M-07 Concept gearbox. As replacement parts, these gears are intended to renew the internal drive path where wear or damage affects smooth running. The studio image shows white molded gears with fine, evenly spaced teeth, hollow center openings and integrated stepped sections shaped for their gearbox positions. This set suits routine drivetrain maintenance on an M-07 Concept chassis car or a targeted gearbox rebuild after heavy use. Kept in a pit box, workshop drawer or spares case, the matched pair gives a direct way to restore the complete gearbox with the specified gear combination for this chassis platform. Warning! Not suitable for children under 14 years.
Gears & motor pinions
M-08/M-07/TA06 Gear Diff. Gasket (2), spare part
300051464€2.69
This spare part set provides gear differential gaskets for compatible Tamiya chassis and supports clean, precise maintenance of the cone differential area. The pack contains 4 flat gaskets, each formed as a circular seal with a shaped center opening, 4 inward tabs and 4 outer holes for the matching mounting pattern. Compatibility covers M-08 CONCEPT, M-07 CONCEPT, TA06, TA06 PRO, TA06 MS, TA05 Ver.II, TD2, TD4, DB01, FF-04 EVO, TRF503, TRF211XM, TRF201XMW, XV-01, XV-01 PRO and XV-01T chassis. For specific setups, TA05 Ver.II uses the gasket with 54312, DB01 uses it with 54329, and TD4 and TD2 use it with 54471. The thin gasket format suits replacement during differential service when worn or compressed seals need to be exchanged for matching new parts. In workshop use, the 4-piece pack supports repeated maintenance sessions or more than one compatible chassis in the collection. The clearly defined cut shape helps align the gasket with the cone differential section during installation, keeping service work focused on fit and correct parts matching. Warning! Not suitable for children under 14 years.
Gears & motor pinions
MB-01 29T Pinion Module 0.6, RC pinion gear
300051726€5.39
The MB-01 29T Pinion Module 0.6 is a drivetrain spare part made for the Tamiya MB-01 chassis. With 29 teeth and module 0.6 gearing, it gives the transmission a clearly specified replacement component for maintenance work, rebuilds and planned parts stocking around an existing MB-01 setup. The compact gear uses a toothed outer profile and a central mounting hole to sit in the drive system as intended for this chassis platform. The engraved 29 marking provides a quick visual check during bench work, which helps when matching the installed ratio to workshop notes or separating parts between different builds. As a single-piece replacement, it suits targeted servicing where one worn pinion needs to be exchanged rather than a full drivetrain refresh. The metal construction also makes it a natural fit for a mechanical assembly that depends on accurate tooth engagement. In workshop use, this pinion gear supports routine transmission maintenance, parts sorting and chassis-specific repairs. It also works well as a spare kept alongside other MB-01 running gear, ready for rebuild sessions or for replacing a used gear after repeated track time. Warning! Not suitable for children under 14 years.
Axes & drive shafts
MB-01 C-Parts Transmission Spare Parts Set
300051721€7.19
The MB-01 C-Parts Transmission set supplies replacement drivetrain parts for the MB-01 chassis, centering on the transmission area where matched fit matters most. Black molded components and metal shaft sections form a compact service set for restoring the original mechanical layout with the specified C-parts. Included are differential cup joints, axle shafts, dogbone shafts and propeller shafts, grouped for transmission-related maintenance on the MB-01 platform. The forked cup pieces and connecting shafts handle the mechanical link between rotating drivetrain sections, while the smaller spacers and retaining hardware shown in the set support correct assembly of the replacement parts. This makes the set useful when worn or damaged transmission components need to be exchanged with the designated matching parts rather than improvised substitutes. On the workbench, the set supports targeted repair of an MB-01 drivetrain without changing to a different chassis standard. It suits routine maintenance, rebuilds after heavy running, or keeping spare transmission components ready for the next service interval on an MB-01 model.
Gears & motor pinions
MB-01 D-Parts Gearbox, chassis spare parts
300051722€9.49
The MB-01 D-Parts Gearbox brings together key chassis components for repair, maintenance and parts replacement on the MB-01 platform. This sprue covers several of the mechanical sections that shape the layout of the chassis, with moulded parts for the drivetrain area, deck structure and steering system arranged as one matched set. Alongside the motor mount, gearbox and upper deck, the set also provides an R/C equipment deck and wheelbase adjustment parts for the MB-01 chassis. The black moulded pieces show reinforced ribbing, axle openings, hinge points and screw locations that suit structural mounting and gearbox housing tasks within the chassis build. Because these parts are supplied together on the D-Parts sprue, matching sections can be replaced with the correct group intended for the same platform. This set suits workshop use when an MB-01 chassis needs worn or damaged sections exchanged, or when a stored build is being returned to running condition with the proper chassis hardware. It also fits ongoing bench maintenance where drivetrain housings, steering mounts or deck sections need the original replacement parts for the model. Warning! Not suitable for children under 14 years.
Gears & motor pinions
MB-01 G-Parts Gears, chassis parts set
300051723€4.79
The MB-01 G-Parts Gears set supplies drivetrain-related replacement parts for the MB-01 chassis, centered on a G-Parts sprue with a 65T spur gear and differential components. This layout gives the chassis a direct source for key internal gear parts when wear, damage or a full teardown calls for fresh hardware. Within the sprue, the 65T spur gear serves as a defined transmission component rather than a generic gear, while the differential parts address another separate section of the drivetrain. Keeping these parts grouped under the G-Parts designation helps match them to the MB-01 platform during workshop sorting and chassis maintenance. The set is aimed at repair, servicing and parts replacement for an existing model, not at a complete vehicle build. No scale is stated in the data, and the pack is identified specifically for the MB-01 chassis. On the bench, this set fits naturally into routine gearbox service, differential refresh work or a rebuild after heavy use. It also suits keeping a dedicated replacement sprue on hand for the MB-01, so the correct gear and matching internal parts are ready when the chassis is opened for maintenance.
Axes & drive shafts
MB-01 M-Parts, chassis spare parts sprue
300051724€5.39
The MB-01 M-Parts sprue brings together several of the chassis pieces that matter most when an MB-01 build needs replacement hardware rather than a full new kit. This set is centered on the MB-01 platform and groups key black molded parts on one sprue, making it a practical match for repair work, routine maintenance, or keeping workshop stock ready for the next rebuild. Alongside suspension arms, the sprue also carries body mounts, a bumper and damper shafts, covering parts that sit across the running gear and upper mounting structure. That mix is useful when wear or impact affects more than one area at once, because the set addresses several connected mounting points in a single purchase. The molded layout also helps identify each piece before removal from the sprue, which keeps preparation straightforward at the bench. As a chassis parts set rather than a complete vehicle, it focuses on restoring original MB-01 component positions and connections. On the workbench, this sprue suits planned servicing as well as targeted replacement after track contact or repeated running sessions. It can be kept as a ready spare for an existing MB-01 chassis or used when a rebuild calls for fresh molded components in the suspension and body support areas.
Gears & motor pinions
Pinion Gear-Set 16/17T Alu M0.6 for RC Chassis
300050354€8.99
This aluminum pinion gear set brings 2 tooth-count options to compatible RC chassis, with one 16T gear and one 17T gear in M0.6 pitch for drivetrain replacement or gearing changes. The silver-finish parts have a compact machined form, and each pinion is secured with a grub screw for firm mounting on the motor shaft. The set is intended for clearly defined chassis combinations rather than general use. TT-02FT, M-05, M-05 PRO, M-05 ver.II PRO, M-06 and M-06 PRO chassis use only the 16T gear. XV-02PRO, TA07 PRO, TA08 PRO and M-08 CONCEPT chassis use only the 17T gear. For F104PRO II chassis, the set is used with 51609. For TA07 MS chassis, only the 17T gear is usable and it is used with 51356, 51423 and 51548. Scope of delivery: 2 pinions and 2 grub screws. That makes the set a practical choice for workshop stock, scheduled maintenance or a direct replacement when a specific chassis calls for one of these tooth counts. In a bench setup, the stamped 16 and 17 markings help identify the correct gear quickly before installation, keeping chassis-specific drivetrain work clear and organized. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Pinion Gear-Set 18/19T Alu M0.6, RC gear set
300050355€9.99
The Pinion Gear-Set 18/19T Alu M0.6 brings 2 aluminum motor pinions into one compact drivetrain set, with 18T and 19T tooth counts for compatible Tamiya chassis. Each gear mounts with a grub screw, creating a firm connection on the motor shaft for controlled power transfer through the drivetrain. This set is intended for tuning, replacement and maintenance work across several chassis families. It fits M-05, M-05 PRO, M-05 ver.II PRO, M-06, M-06 PRO, WR-02, WR-02G, WR-02C and WR-02CB chassis. Use on some platforms follows specific tooth-count rules: GF-01CB uses only the 18T pinion, while TT-01 TYPE-E and TT-01D TYPE-E use only the 19T pinion. F104PRO II uses the set with 51609, TA07 MS Chassis uses it with 51356, 51423 and 51548, and F103GT uses only the 18T pinion with 50506. In workshop use, the 2 included pinions give a straightforward way to compare gearing options during a rebuild or drivetrain refresh. The M0.6 specification keeps the set aligned with matching gear applications, whether the goal is restoring a worn drive part or preparing a chassis for a different running setup. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Pinion Gear-Set 22/23T Alu M0.6, RC gear set
300050357€9.99
This pinion gear set brings 2 aluminum motor pinions into one compact drivetrain upgrade for compatible RC chassis. With 22T and 23T tooth counts and an M0.6 specification, it supports clear gearing choices when adjusting acceleration response or matching a replacement part during maintenance. Each pinion is machined with a central bore and a side threaded hole for the grub screw, so the gear mounts directly to the motor shaft in a straightforward mechanical layout. The included contents are 2 pinions and 2 grub screws. The 22T and 23T markings on the gears make identification quick during setup, storage or parts sorting. Aluminum construction keeps the set focused on a precise drivetrain component rather than a general hardware mix. For TT-01 TYPE-E chassis, the set offers both tooth-count options, while TT-01D TYPE-E chassis can use only the 22T gear. On the bench, this set suits routine replacement work, ratio comparison between 22T and 23T, or keeping a second pinion ready in the parts box for compatible RC running sessions. It also fits neatly into a workshop stock of drivetrain spares where exact tooth count and pitch matter. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Pinion Gear-Set 24/25T Alu M0.6, motor pinion set
300050477€10.79
This motor pinion set brings a focused drivetrain upgrade to compatible RC chassis with 2 aluminum pinions in 24T and 25T plus 2 grub screws for mounting. The M0.6 gear specification makes it a targeted choice for model builders who need the correct tooth pitch for matching transmission parts and a clean fit on the motor shaft. The set is intended for several established chassis platforms in the Tamiya range. It fits M-07 CONCEPT and M-08 CONCEPT chassis, with the note that only the 24T pinion can be used on M-08 CONCEPT. It also fits TT-01 TYPE-E and TT-01D TYPE-E chassis, where it is used with 53665. That compatibility detail matters during drivetrain setup, because the pinion must match both the chassis layout and the related gear components already in use. The aluminum construction adds a crisp machined finish and a precise look that suits technical RC assemblies. On the bench, this set supports replacement work after wear or a gearing change during a fresh build. In workshop use, the 2 included pinions give a direct choice between 24T and 25T, while the grub screws complete the mounting hardware needed for installation. Warning! Not suitable for children under 14 years.
Axes & drive shafts
Shaft 2 x 9.8 mm, model spare part, 10 pcs
309805776€3.99
This spare shaft set brings exact replacement dimensions to model maintenance with 10 steel shafts measuring 2 x 9.8 mm. The compact format suits small mechanical assemblies where a worn, bent or missing shaft can affect how connected parts sit and move. The 2 mm diameter and 9.8 mm length give a clear reference for matching an existing part before installation. As a workshop consumable, the set supports repeated servicing across compatible hobby models instead of relying on a single replacement piece. The short shaft format is suited to detail areas where space is limited and clean alignment matters. Keeping identical spares on hand can simplify routine upkeep when several connection points use the same measurement. In a home workshop, club pit area or model bench, this shaft pack fits neatly into regular maintenance supplies for ongoing repair work. It also serves as a practical stock addition when checking assemblies, replacing lost hardware or preparing compatible builds for the next running session. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TA-01 DF-01 G Parts Gear Set for RC Models
309005322€14.99
The TA-01/DF-01 G-Parts gear set focuses on the mechanical core of compatible RC model assemblies, with injection-moulded components shaped for drivetrain and gearbox-related service work. Visible in the set are a large spur gear with an integrated central bevel gear, 2 medium cylindrical gears with fine outer teeth, smaller gear-form parts on a sprue, and 2 round disc-shaped pieces with raised pegs and centre holes. These parts support repair and replacement tasks where worn, missing or damaged transmission elements affect the running condition of a TA-01 or DF-01 based build. The different tooth forms, mounting holes and moulded connection points indicate use in geared drive sections rather than body or decorative areas. As unassembled service parts, the set gives builders the correct component shapes needed for maintenance without requiring improvised substitutions. On the workbench, the clearly separated moulded pieces help with checking fit before installation and with comparing old and new parts during a rebuild. This makes the set useful for planned servicing as well as for bringing an older chassis back into operating condition after drivetrain wear or gear damage. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TA-01/02/DF-01 Ball Diff. Unit, RC spare part
300053070€43.99
The TA-01/02/DF-01 Ball Diff. Unit is a dedicated RC spare part for compatible TA-01, TA-02 and DF-01 chassis, bringing the differential section back into working order with a matching replacement assembly. As a ball differential, it is intended for the drivetrain, where controlled internal movement helps manage how drive is transferred through the gearbox during running. The set is supplied as 1 ball differential with 8 pieces, giving the core parts needed for this specific maintenance job rather than a mixed assortment of unrelated hardware. The accompanying assembly information refers to ball differential grease during installation, showing that this unit is built as a serviceable mechanical component rather than a sealed module. Documented elements such as the differential spur gear, gearbox joint, hexwrench steps and placement notes point to a structured assembly sequence with attention to part orientation. That makes the unit relevant for repair benches, rebuild projects and routine drivetrain upkeep on older compatible chassis. In workshop use, the unit fits naturally into a maintenance cycle that includes inspection, replacement of worn drivetrain parts and reassembly of the gearbox area. For existing TA-01, TA-02 or DF-01 models, it provides a direct route to keeping a compatible chassis in running condition with the correct differential format. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TA-01/02/FF-01 C-Parts, rear upright spare set
310005377€12.79
The TA-01/02/FF-01 C-Parts rear upright set is a chassis-specific spare for compatible Tamiya models, supplying the moulded parts needed in the rear upright area on a single black sprue. For repair, maintenance or a careful rebuild, the matched layout keeps related pieces together and ready for selection at the bench. The injection-moulded frame holds several components in their original positions until removal, which helps preserve part identification during preparation and fitting. Mirrored shapes for left and right assembly can be checked before cutting from the runner, reducing mix-ups when replacing worn or damaged suspension-side parts. The sprue format also supports clean storage between repair sessions, since unused pieces remain attached and easier to track than loose small parts. Visible moulded markings on the runner further reflect its role as a functional service part for model maintenance. This spare set fits situations where a compatible chassis needs renewed rear upright components after use, damage or a missing part in a long-running build. It also suits keeping a dedicated replacement sprue on hand for workshop stock, so servicing can stay focused on the exact chassis section rather than replacing unrelated assemblies.
Axes & drive shafts
TA-01/02/TB-01/02/TG Wheel Axle Set, RC spare part
300050808€12.79
This RC spare part set supplies 2 metal wheel axles for compatible TA-01/02, TB-01/02 and TG chassis, giving a direct replacement option where a 39 mm axle is specified. The machined shape combines a threaded end, a cross-hole and a slotted coupling section, so the part matches the connection points used in these model vehicle platforms. The 39 mm format is the key reference for installation planning and parts matching. The pair layout supports side-to-side replacement with matching hardware rather than mixing old and new axle parts. The metal construction shown in the data suits a mechanical role where rotation, fastening and drivetrain connection meet in one compact component. Because the set is defined for TA-01/02, TB-01/02 and TG chassis, the copy stays focused on those stated applications only. In workshop use, this axle set suits routine maintenance, repair after wear, or restoring a compatible chassis to running condition with the specified part format. The 2-piece scope of delivery keeps the contents clear for parts drawers, bench stock and planned service work on supported RC models. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TA-01/DF-01 Upright (2), RC spare part, black
300445572€8.69
TA-01/DF-01 Upright (2) is a black RC spare part set for compatible TA-01 and DF-01 chassis builds, supplying 2 mirrored uprights on a single molded sprue for direct replacement work. The paired form supports left and right side installation, making it easier to restore the original mounting layout when an existing part is worn, cracked or missing. Each upright is injection-molded and shaped with cylindrical mounting sections, angled arms and reinforcing ribs that support the part where screws or pins pass through the fixing points. The molded geometry is designed for chassis assemblies that rely on precise alignment between connected components, so replacement with the correct upright helps maintain clean mechanical fit. The central sprue keeps both matching pieces together until installation and helps identify the set as one complete replacement pair. This spare part suits workshop use during routine maintenance, rebuilds after running wear, or parts-box preparation for TA-01 and DF-01 platforms. Kept on hand with other service components, the 2-piece set supports faster repairs when suspension or wheel-mount areas need attention. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TA-02 Gear Set, RC spare part, 15-piece drivetrain
300050529€12.99
The TA-02 Gear Set is a dedicated RC spare part set for transmission repair, built around the updated gear layout shown for this drivetrain. Its 15 included pieces support service work on compatible TA-02 based models, with the main revision centered on a one-piece molded spur and drive gear that replaces the earlier separate parts arrangement. This change brings the large spur gear and the smaller drive gear together in a single repair component, so the transmission uses the revised integrated format specified for this set. The package also uses an idler gear in resin instead of the earlier metal version, and the ball retainer specification is G4. These details matter when replacing worn internal drivetrain parts, because the set is designed around that exact update rather than a generic mix of gears. The scope of delivery is 1 gear set with 15 pieces. On the workbench, the set suits planned transmission overhauls as well as targeted replacement of worn gear components after regular RC running. It is intended for compatible TA-02 applications and is not compatible with 1/10 R/C off-road buggies, making the fit context clear before installation begins. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TA-02/CC-01/FF-01 Front Upright Pair, RC Spare Part
300050705€7.29
This spare part set is made for TA-02, CC-01 and FF-01 chassis and supplies 2 black front uprights for the steering end of the front axle. The mirrored left and right layout supports a matched fit during repair work and helps restore the intended geometry at the front wheel mounting points. Each upright is moulded with a circular hub opening, fastening holes and a reinforced arm section that connects into the surrounding steering hardware. The ribbed structure adds material where the shape changes direction, while the drilled connection points support accurate screw-based installation with the corresponding chassis parts. As a dedicated replacement part, the set focuses on the front upright area rather than a universal fit across unrelated platforms. The pair suits routine maintenance, rebuilds after wear, or the completion of an older TA-02, CC-01 or FF-01 chassis project. In workshop use, the 2-piece set makes it possible to replace both front sides together and keep the steering assembly consistent across the axle. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TA-02/FF-01 Front Upright, spare part, blue
300445246€8.69
The TA-02/FF-01 Front Upright blue set supplies 2 replacement uprights for compatible front-end assemblies. Each part is formed as a mirrored counterpart, so the left and right sides can be positioned correctly when restoring the steering or suspension layout on a TA-02 or FF-01 chassis. The shape combines a large cylindrical hub section with a smaller upper mounting point and a flat arm with a fastening hole. Reinforcing ribs add structure to the moulded form, and the visible metal insert at the upper mount provides a ready fixing point within the assembly. The blue colour helps separate this pair from other small chassis parts during sorting, servicing and rebuild work. As a dedicated spare part, this set is intended for precise replacement rather than general-purpose adaptation. The 2-piece format suits routine maintenance, repair of worn front components or keeping matching replacements on hand for workshop use. In a build area or pit box, the mirrored pair can be checked against the existing front assembly before fitting, helping keep the chassis layout consistent on both sides. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TA-05/TB-03 Drive Shaft, metal spare part, 45 mm
300051216€11.99
The TA-05/TB-03 Drive Shaft 45 mm is a metal spare part for compatible Tamiya chassis setups, with 2 matching shafts supplied for drivetrain service on FF-03 chassis, FF-03 PRO chassis, TA05 Ver.II and TA05. The 45 mm length gives a clear fit reference when a build or repair calls for this exact shaft size. Each shaft uses a straight rod form with ball ends and cross pins, a layout designed to connect with the surrounding drivetrain hardware in the intended mounting points. The metal construction and polished finish give the part a clean technical look while keeping the focus on mechanical function inside the chassis. As a dedicated replacement component, it suits maintenance work, parts refreshes and like-for-like swaps where the named platforms require this specific format. In workshop use, the 2-piece set supports planned servicing or the replacement of worn drivetrain hardware on one of the listed chassis types. Kept alongside other RC spares, the clearly stated compatibility and 45 mm dimension make this part easy to identify before installation. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TA-05IFS D-Parts, RC chassis suspension arms
300051297€10.99
TA-05IFS D-Parts is an RC chassis spare parts set with 4 molded suspension arms arranged as 2 front and 2 rear pieces. The wishbone-style shape, mounting holes and central attachment points support correct installation on compatible touring car platforms and restore the intended suspension layout after wear or impact damage. The scope of delivery contains 1x D parts tree with 4 parts. These black molded components are intended for replacement and maintenance work rather than universal use, so the value lies in exact fit across the listed chassis families. Compatibility covers FF-03, FF-03 PRO, TA06 MS, TA06, TA06 PRO, TA05 ver.II, TB-Evo.7, TB-Evo.6 MS, TB-Evo.6, TB-05 PRO, TB-04, TB-04 PRO, TB-03, TB-03 VDS, TRF419XR, TRF419X, TRF419, TT-02 TYPE-SR and TT-02 TYPE-S. That broad fit list makes the set useful in a spares box for racers and builders maintaining more than one platform. During workshop servicing, replacement arms like these help return free suspension travel and proper linkage alignment on the compatible chassis. They also suit planned rebuilds where fresh running gear parts are fitted before the next track session. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TA-06 Rear Gear Diff. Case Set 52T Spare Part
300051462€4.79
The TA-06 Rear Gear Diff. Case Set 52T is a dedicated spare part for compatible Tamiya chassis, built around a rear bevel gear differential housing layout that supports accurate servicing of the drivetrain. With 7 pieces in the set, it provides the core parts needed for replacing the rear diff case assembly when wear, damage or a rebuild calls for fresh components. This set is specified for TA06, TA06 PRO, TA06 MS, XV-01, XV-01 PRO, XV-01T, M-07 CONCEPT, M-08 CONCEPT and FF-04 EVO chassis. It also fits TD4 and TD2 chassis when used with 54471, which makes the compatibility scope especially useful for hobby benches handling several platforms. The black moulded parts shown for the assembly use multiple fastening points and a separate cover section, supporting a clean mechanical fit around the differential area. On a maintenance bench, the set helps restore a worn rear transmission section with chassis-specific parts instead of improvised substitutes. During a rebuild, the 52T case format and rear mounting design support a focused replacement job for the differential housing section while keeping the chassis setup aligned with the listed applications. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TA02 D-Parts Suspension Arms, RC spare parts
310555091€18.79
TA02 D-Parts Suspension Arms bring core running gear pieces together in one replacement set for RC chassis maintenance. The black molded sprues show mirrored suspension components, linkage-style parts and smaller inserts, giving a clear starting point when worn or broken originals need to be swapped out. The sprue layout keeps related shapes organised before removal, which helps when matching left and right side parts during a repair. Large A-arm style pieces sit alongside long narrow bars with multiple mounting points, plus smaller lever-like forms and circular bush-style elements. This mix supports detailed work on suspension-related areas rather than general cosmetic changes. The molded numbering on the runners also helps identify individual sections during parts preparation and fitment. On the bench, this set suits routine chassis upkeep, restoration of older TA02-based builds and replacement after hard running sessions. It also works as a practical spare to keep in a workshop drawer, ready for rebuilds that call for original-style suspension hardware and linked structural pieces.
Gears & motor pinions
TA05 IFS Ver.II Spur Gear, RC spare part, 70T M0.6
300051215€6.29
The TA05 IFS Ver.II Spur Gear is a dedicated RC spare part for drivetrain service on selected Tamiya chassis. With 70 teeth and module 0.6, this main gear is built for transmission use where the gear ratio and tooth format must match the existing layout, making it a focused choice for repair or planned parts replacement. The component is supplied as 1 main gear 70T and is shown as a black molded gear with a fine outer tooth ring, a large center hole and multiple evenly spaced inner holes. That geometry matters during maintenance because the mounting pattern and hub area have to align with the drivetrain hardware already in the chassis. Compatibility is stated for TD4 chassis, TD2 chassis, TA08 PRO chassis, TA05 Ver.II chassis and TA05, which keeps selection tied to named platforms rather than broad guesswork. On the bench, this gear suits routine transmission refreshes, rebuilds after wear, or a direct swap when a matching 70T M0.6 part is needed for one of the listed chassis. The single-part scope also keeps the replacement straightforward when an existing drivetrain setup is being restored with the same specification rather than changed to a different ratio. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TA08 06 Module Spur Gear 71T, RC spare gear
300051667€3.69
The TA08 06 Module Spur Gear 71T is a drivetrain spare part for TA08 chassis cars, built to replace a worn gear with the same 06 module format and 71T tooth count. In the transmission, the spur gear works directly with the pinion gear to pass motor power into the driveline, so a fresh gear can restore clean meshing where wear has built up over time. The part shown has a black moulded finish, a large centre hole and multiple circular cut-outs around the hub. Those openings are part of the gear design and sit around the central mounting area while the fine outer teeth carry the load of the gear mesh. Used as routine maintenance, this replacement helps keep the chassis in running condition when the original gear shows visible wear on the teeth. The pack contains 1 TA08 06 Module Spur Gear 71T. It suits workshop upkeep between running sessions, whether the transmission is being refreshed after repeated use or a worn gear is being swapped before the next outing. For TA08 owners who keep spares on hand, this gear covers a core wear point in the drivetrain with the exact compatibility stated for TA08 chassis cars.
Axes & drive shafts
TA08 A Parts Steering Arm Pully RC Spare Set
310015144€14.49
TA08 A Parts Steering Arm Pully 58693 is a replacement parts sprue for RC model maintenance, centred on steering arm and pulley components that restore key chassis functions on the intended TA08 build. The black moulded frame presents the parts in a clearly organised layout, with each piece held in place until needed at the workbench. The runner carries a mix of larger structural shapes and smaller fitting pieces, including arm forms, ring elements and compact mounting details that belong together within the same assembly area. Moulded reference marks with the letter A and numbers 1 through 14 are visible on the sprue, giving a direct visual guide when matching each section to the required build step or service task. This format helps separate similar-looking pieces before cutting and supports a tidier repair process when a worn section needs replacement rather than a full rebuild. On a maintenance bench, the grouped layout makes it easier to prepare the required sections before installation and keep unused pieces together until later service work. For ongoing chassis care, a dedicated replacement frame like this helps return the matching model to proper mechanical condition with the correct part shapes kept in one set.
Axes & drive shafts
TA08 D Parts Suspension Arms for TA08 Chassis
300051669€13.49
TA08 D Parts suspension arms are replacement chassis components for TA08 cars, supplied as 2 parts for maintenance when existing arms are worn. The set focuses on a key suspension area, making it useful for restoring the chassis with matching parts intended for the named platform. The molded parts shown in the set use a mirrored left and right layout, with multiple pivot points and mounting positions formed into each arm. This geometry matters in an RC chassis because the suspension arms connect the wheel assembly to the main structure and guide movement through compression and rebound. Metal-lined pivot holes are visible in the image, adding defined contact points where the parts mount into the suspension system. The black finish keeps the look consistent with typical chassis hardware and makes the parts easy to integrate into an existing TA08 build. These parts suit routine workshop maintenance, rebuilds after heavy running, or a fresh chassis refresh before the next session. In a repair setup, the 2-piece format supports replacing worn arm sections as a matched pair so the suspension layout stays even across the car.
Gears & motor pinions
TA08 Front Belt 132T, RC spare part for chassis
300051670€12.19
The TA08 Front Belt 132T is a dedicated replacement part for compatible TA08 chassis cars, built to restore the front drivetrain with the specified tooth count and matching belt format. Its black toothed loop is shaped to run around the front transmission pulleys, where it transfers motion through the drivetrain and helps return a worn setup to its intended mechanical operation. As a service part, this belt is focused on fit and function rather than cosmetic change. The 132-tooth layout is the defining specification for this component, making it relevant when an existing belt shows wear through repeated running or maintenance inspection. The thin, flexible construction allows the belt to sit correctly within the chassis transmission path, while the toothed inner profile is made to mesh with the matching pulley system used in the TA08 platform. This replacement suits regular workshop upkeep, planned drivetrain refreshes and repair after belt wear has affected running consistency. Kept as a spare for a TA08 chassis car, it supports faster maintenance decisions when the front drive system needs the correct belt specification rather than a universal substitute.
Gears & motor pinions
TA08 Rear Belt 101T, chassis spare part
300051671€9.19
The TA08 Rear Belt 101T is a dedicated spare part for TA08 chassis cars, built to replace the rear transmission belt when wear starts to affect the drive system. Its toothed inner surface is designed to engage with matching pulleys, creating the mechanical link that carries rotational force through the rear section of the chassis. Used as part of routine maintenance, this replacement belt helps preserve the intended drivetrain function of a TA08 setup. The circular flexible belt format allows it to sit correctly around the pulley path, while the 101T specification identifies the exact rear belt version supplied here. The pack contains 1 rear belt, making it a direct service part rather than a multi-piece upgrade set. Because this is a chassis-specific component, compatibility is stated for TA08 chassis cars. In workshop use, a fresh rear belt is fitted when an existing belt has become worn through repeated running. That makes this part a practical choice for keeping a TA08 car ready for further track sessions, tuning work, and regular upkeep of the transmission system.
Gears & motor pinions
TB-03/TT-02SG Spur Gear, RC spare part, 64T
300051356€5.69
The TB-03/TT-02SG Spur Gear 64T M0.6 is an RC spare part built for drivetrain service, replacement and gearing maintenance on compatible chassis. With 64 teeth and module 0.6, it forms the main gear interface that transfers drive through the transmission, making it a concrete choice when an existing setup needs the same specification again. This gear is supplied as 1 main gear and is intended for use with TT-02 chassis, TT-02D chassis, TT-02 TYPE-S chassis and TT-02 TYPE-SR chassis. It can also be used on vehicles equipped with 54500. For TT-02RR chassis, the 64T gear is standard kit equipment, which helps when matching the original drivetrain specification during routine parts replacement. The visible central mounting hole and surrounding fixing points suit its role as a mounted transmission component rather than a general workshop accessory. In workshop use, a like-for-like 64T replacement keeps a compatible chassis aligned with its intended gearing layout after wear or damage. It also suits RC model maintenance benches where specific tooth counts and module sizes matter for keeping transmission parts consistent across different compatible builds. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TB-04 One-way/Gear Dif. Ring Gear Set 40T
300051547€7.39
The TB-04 One-way/Gear Dif. Ring Gear Set 40T is a drivetrain spare part for selected RC chassis, built around a 40-tooth ring gear and matching bevel components for freewheel or gear differential use. Its dedicated fitment keeps maintenance work focused on the transmission systems named for this set. The set contains 1 bevel gear set with 3 parts. The large ring gear uses a circular form with evenly cut teeth around the outer edge, while the smaller matching gears complete the assembly for the stated drivetrain function. This makes the set suitable for replacing worn internal transmission parts or preparing a compatible chassis for differential or one-way service work. Compatibility is stated for TB-Evo.7 chassis, TB-Evo.6 MS chassis, TB-Evo.6 chassis, TB-05 PRO chassis, TB-04 chassis, TB-04 PRO chassis and TC-01 chassis. In workshop use, the set supports targeted repairs on the named platforms rather than broad universal fitment. The 40T specification gives a clear reference point when matching replacement drivetrain parts during servicing, rebuilds or planned maintenance on compatible RC car chassis. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TB-05 06 Module Spur Gear 63T, spare gear
300051609€3.89
The TB-05 06 Module Spur Gear 63T is the direct spare gear for the TB-05 chassis, built to return the drivetrain to the original kit specification with a 63-tooth layout and 06 module tooth form. As an OEM replacement, it is intended for the same transmission position as the stock part, so the gear train can be restored with the correct meshing profile and ratio. The moulded gear uses fine outer teeth around the full circumference to transfer rotational force through the drivetrain, while the large centre bore locates the part on its mounting point. The inner web includes multiple moulded support sections and cutouts that shape the gear body around the hub area. This is a single replacement component rather than a conversion part, making it suitable when the original spur gear is worn or when the stock specification is needed again. The tooth pitch is optimised for use with common gear ratios, as stated in the product data. In workshop use, this spare gear suits routine drivetrain maintenance on a TB-05 chassis or a rebuild that returns the transmission to the original kit setup. It can also serve as a like-for-like replacement to keep a running chassis aligned with the factory gear specification. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TC-01 C/D-Parts Suspension, chassis spare parts
300051663€12.79
The TC-01 C/D-Parts Suspension set is a dedicated spare parts pack for TC-01 chassis cars, built around 2 C/D parts trees that support accurate maintenance of the suspension system. With molded replacement pieces for key chassis assemblies, it helps restore clean fit and consistent movement where the running gear works hardest. Within the set are suspension arm, knuckle and rocker arm components, grouped as useful service spares for the TC-01 platform. These parts sit in areas that guide wheel movement, support steering articulation and connect suspension elements across the chassis layout. Using model-specific replacement parts keeps mounting points, pivot locations and part geometry aligned with the original TC-01 design. The black molded finish also matches the technical look commonly used across RC chassis assemblies. This set suits workshop maintenance, rebuilds after heavy running sessions, or keeping a spare pack ready for future repairs on a TC-01 car. It can be used when refreshing worn assemblies, replacing damaged pieces after contact, or rebuilding one side with matching counterpart parts from the same set.
Axes & drive shafts
TD4 Universal Shaft Set, RC drivetrain parts
300022028€33.99
The TD4 Universal Shaft Set brings a focused drivetrain upgrade or replacement to RC model maintenance, centered on 2 assembled universal shafts and the matching wheel-end hardware. Black-coated metal construction and the articulated joint layout support power transfer where rotating parts need to keep working through steering input and suspension travel. Each shaft is marked 73 and uses a looped eye at one end with a ball end at the other, a mechanical arrangement suited to angled driveline connections rather than a fixed straight link. Alongside the shafts, the set provides 2 axle or outdrive-style components with threaded sections and cross-holes, plus retaining rings, straight pins and 2 short cylindrical couplers. That combination gives the assembly the small locking and joining parts required for a complete drivetrain fitment around the shaft connection points. On the bench, this set suits repair work after wear in the driveline or a planned parts refresh during a chassis rebuild. The compact hardware selection also helps keep RC maintenance organised, with the matching metal pieces grouped for one shaft-related installation rather than drawn from mixed spare parts.
Gears & motor pinions
TL-01 G-Parts Gear Set, chassis spare parts
300050738€12.29
The TL-01 G-Parts Gear Set is a dedicated spare parts pack for the TL-01 chassis, built around the transmission components used in this platform. With 10 pieces in the set, it provides a focused way to replace worn gearbox parts, refresh a running chassis, or support a rebuild with matching molded elements. The scope of delivery includes 1x G-Parts set with 10 pieces. The visible component group covers several gear forms used in drivetrain layouts, including larger spur-style gears, smaller geared parts and round cover-like elements shaped for gearbox assembly. These molded parts are intended for power transfer inside the chassis transmission, where the gear train routes motor output through meshing teeth and mounted shafts. Using a chassis-specific set helps keep fit and function aligned with the TL-01 layout instead of relying on mixed generic parts. On the bench, this set fits routine service, fault tracing after drivetrain wear, or a planned refresh of an older TL-01 build. It also works well as a workshop spare kept alongside other chassis-specific parts, ready when gearbox maintenance calls for the correct G-Parts group. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TL-01 Upright C-Holder Set, chassis spare parts
300050736€10.79
This TL-01 B-Teile Achsschenkel/C-Halter set is a dedicated spare parts pack for the TL-01 chassis, supplying the molded components needed when key mounting points on the running gear need replacement. The scope of delivery includes 1x B parts group with 21 pieces, arranged as a matched set for chassis service and rebuild work. The molded black components include upright and C-holder forms together with related small fittings from the same parts section, so the replacement pieces come from one coordinated runner group. Image details show mirrored left and right parts, circular bearing housings, pivot points, hex-shaped hub-style pieces and marked small levers, all indicating precise placement within the chassis assembly. This makes the set useful for restoring worn or damaged areas while keeping the fit consistent with the original TL-01 layout. On the workbench, the set supports routine maintenance, targeted repairs after running sessions or the refresh of an older chassis build. Kept as workshop stock, these chassis-specific parts help avoid mixing incompatible components and make it easier to return a TL-01 model to proper mechanical condition. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TL01 Stainless Steel Suspension Shaft Set
300053301€9.59
The TL01 Stainless Steel Suspension Shaft Set is a hop-up hardware set for TL01 chassis models, built around 8 grooved stainless steel shafts and 16 matching 2 mm E-rings. The shaft layout follows the replacement guide shown for the chassis, with 4 shafts at 3 x 48.5 mm and 4 at 3 x 37 mm, giving the suspension mounting points the specified metal parts for service or upgrade work. The grooved shaft ends are designed to accept the included E-rings, which snap into place to retain each shaft after installation through the relevant suspension points. The guide identifies these shafts as replacements for 3 x 46 mm and 3 x 32 mm screw pins, changing the fixing method from threaded pins to retained shafts with clips. That layout is useful when refreshing a used chassis, replacing missing hardware or preparing a TL01 build with the correct hop-up parts. The set focuses on the pivot hardware itself rather than cosmetic changes, making it a functional addition for maintenance benches and parts boxes. During assembly or repair, the two shaft lengths help match the correct front or rear mounting positions shown in the fitting diagram. The compact metal parts format also makes the set easy to store alongside other chassis spares for routine rebuilds and running upkeep.
Axes & drive shafts
TRF 44 mm Swing Shafts, RC spare part, 2-piece
300022103€18.99
This 2-piece set of TRF 44 mm lightweight half cardan shafts is built for on-road RC chassis that use a compact, efficient driveline layout. The 44 mm length gives a defined fit for supported platforms, while the lightweight shaft design supports responsive rotation through the transmission under racing loads. Each shaft is intended for use with ball bearings, where the reduced friction helps limit speed loss in corners and keeps the driveline running with less drag. The set is suited to maintenance as well as targeted tuning, especially when a chassis needs fresh driveline parts after repeated track sessions. Supported compatibility includes the TRF420, TA08PRO, TRF420X and TA08R chassis. For the TRF421 chassis, use with ball bearing set 51762 and differential joints 51764 is specified when fitted to chassis 42384. In workshop use, this set fits naturally into a rebuild focused on transmission efficiency and consistent corner exit response. It also serves as a practical spare for race-day parts boxes, where exact length, defined chassis fit and low-friction operation matter more than generic universal hardware.
Axes & drive shafts
TRF 46 mm Drive Shafts, RC accessory, double cardan
300051761€23.49
The TRF 46 mm aluminium drive shafts are a dedicated RC accessory for double cardan shaft systems on the TRF421 and TRF421X chassis. Supplied as 2 shafts, they support a driveline layout that works with ball bearings to keep rotation efficient through fast direction changes and technical corner sections. Their role sits at the centre of the transmission path, where reduced friction can help preserve drive feel when the chassis is loaded in turns. The 46 mm length matches the stated application, and the aluminium construction gives this set a focused mechanical specification for competition-oriented maintenance. When fitted on the TRF421 chassis, the setup is used with item 51762 for universal shaft ball bearings, item 51763 for TRF421X front direct joint bearings, and item 51764 for differential joints. This set suits bench servicing, race-day spares planning, and targeted drivetrain refreshes on compatible chassis. In a workshop setup or between heats, the shafts slot into a parts selection built around TRF421 and TRF421X running gear, keeping the transmission system aligned with the intended double cardan configuration.
Axes & drive shafts
TRF Drive Shaft 42mm W Cardan, RC spare part
300042239€20.99
The TRF Drive Shaft 42mm W Cardan is a drivetrain upgrade part shaped for front-end use on Tamiya touring cars, where the Double Cardan layout helps cut rotational vibration and gives the steering a cleaner, more settled feel through direction changes. Each shaft uses 2 joint sections, a configuration aimed at smoother power transfer in a part of the chassis where precision is easy to notice. This set contains 2 shafts and is based on the 44 mm Double Cardan Joint Shaft from Item 42216, but with each shaft shortened by 2 mm. That change brings the overall length in line with a standard 42 mm universal drive shaft while leaving more room for suspension setup changes. The result is a tuning part that supports finer adjustment of front suspension geometry without moving away from the familiar 42 mm fit. The dark mechanical finish and compact joint housings match the technical look of competition-focused RC running gear. Installed on the front end of a touring car chassis, these shafts suit builds where steering response, corner entry feel and setup flexibility matter during track tuning. They also work well as replacement drivetrain parts when a front assembly is being refreshed with matching left and right components.
Gears & motor pinions
TRF420 Alu. F Direct Cups, spare parts, aluminum
300051647€19.29
The TRF420 Alu. F Direct Cups set is a focused spare parts release for the front drivetrain of the TRF420 chassis. With 2 aluminum front direct cups and 1 swing shaft cap parts set in the pack, it provides the named replacement parts needed when wear begins to affect the front drive section and running efficiency starts to drop. The direct cups are made from lightweight aluminum and finished with a hard coating. That combination gives the parts a low-mass construction at a point in the drivetrain where repeated contact matters, while the coated surface is specified to support durability during regular use. The shape is designed for the TRF420 chassis, so the set suits planned maintenance as well as like-for-like replacement during a rebuild of the front end. Compatibility also extends to cars using the TRF420 Front Direct Pulley 37T, which broadens fitment within TRF420-based setups. On the bench, this set fits naturally into routine drivetrain servicing, especially when worn cups begin to influence how cleanly the front section transfers drive. It also makes sense as a workshop spare for race-day maintenance, where having the correct front-end hardware ready can shorten downtime between running sessions.
Axes & drive shafts
TRF420 C-Parts Front Uprights, chassis spare part
300051638€6.39
TRF420 C Parts Front Uprights bring the specified spare steering components back to the front end of a compatible touring car chassis. The set is intended as a replacement for the TRF420 race car chassis and uses a 2-part upright layout that divides the arm and bearing housing into separate pieces, giving the assembly the structure required by this design. That 2-piece construction is the key technical detail here: the arm and bearing housing are molded as distinct components rather than a single combined part. This layout matches the newer TRF420 front upright design and can also be used on existing touring car racing platforms named in the compatibility data. The parts are molded in carbon fiber-reinforced material, a specification chosen here for higher rigidity in this steering area. The set contains 1 TRF420 C Parts pack. Compatibility covers TRF420, TRF419, TA07 and TB-05 PRO chassis cars, which makes this spare set useful both for direct replacement and for updating supported front-end configurations on other listed platforms. In a workshop setup, these uprights fit naturally into maintenance, rebuild or race-prep routines where worn steering hardware needs to be exchanged for the correct designated parts.
Axes & drive shafts
TRF420 E-Parts Rear Uprights, RC spare parts
300051640€7.59
TRF420 E-Parts Rear Uprights are replacement suspension components for the TRF420 racing car chassis, made to return the rear end to its intended mounting layout. The carbon fiber-reinforced resin construction focuses on rigidity, so the upright keeps its shape where the shaft and bearing seats need stable support during running. Each set contains 1 TRF420 E Parts sprue, supplying the rear upright pieces shown for this chassis family. The bearing positions are precisely aligned, a detail that matters at the rear hub area where smooth rotation and efficient transfer depend on accurate seating. These parts are designed for use with 3 mm diameter shafts, and they work with cars using Item 51639 TRF420 D Parts suspension arms. That combination makes them a direct maintenance choice when worn or damaged rear suspension hardware needs to be replaced with the correct matching parts. On a workshop bench, these uprights fit into a focused chassis refresh where the rear suspension is being rebuilt around the original TRF420 geometry. They also suit race-day spares storage, where keeping the right molded parts on hand helps return the car to running condition with the intended component match.
Gears & motor pinions
TRF420/419 Gear Diff Bevel Set, model spare parts
300051567€5.89
The TRF420/419 Gear Diff Bevel Set is a drivetrain spare-parts set for selected Tamiya chassis, built around redesigned bevel gears for the newer TRF419 gear differential unit. As replacement internal parts, these gears support accurate restoration of the differential mechanism when the original bevel gears show wear through repeated running and maintenance cycles. The set is described for the TRF419 gear differential unit and also appears in the designation for TRF421X, TRF420 and TA08, making it relevant for several closely related platforms. The redesigned gear shape is specified for the newer differential unit with large oil capacity, a detail that matters when matching internal parts to the correct generation of assembly. The pack contains 2 Gear Differential Unit Bevel Sets in the GV parts category, providing a clear service quantity for workshop stock or scheduled rebuilds. This kind of spare part fits naturally into bench maintenance between race meetings, setup revisions or routine transmission overhauls. Kept alongside other drivetrain consumables, the bevel sets help return a compatible gear differential to its intended internal configuration with the correct replacement parts on hand. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TRF420/419/418 Cross Joint, spare parts set
300051444€4.19
The TRF420/419/418 Cross Joint is a spare parts set for a broad range of Tamiya chassis platforms, bringing together the small connector hardware needed for targeted maintenance and replacement work. In the set are 6 pieces, shown as black cylindrical connector parts, silver metal pins and split rings, giving a clear mechanical match for compact linkage or joint assemblies within the stated fitment range. Compatibility extends across TD4 chassis, TD2 chassis, M-08 CONCEPT chassis, M-07 CONCEPT chassis, TA08 PRO chassis, TA07 MSX chassis, TA07 MS chassis, TA07 PRO chassis, TA06 PRO chassis, TB-Evo.7 chassis, TB-Evo.6 MS chassis, TB-Evo.6 chassis, TB-05 PRO chassis, TRF420X chassis, TRF420 chassis, TRF419XR chassis, TRF419X chassis, TRF419 chassis, XV-02PRO chassis and XV-01 PRO chassis. For TD4 chassis and TD2 chassis, the set is used with 22028. That specific pairing helps when checking fit before a rebuild or when keeping matching service parts ready for repeated chassis upkeep. The small-format parts suit bench work where worn connectors, pins or retaining pieces need a direct replacement instead of a full assembly change. Laid out as separate hardware components, the set supports precise servicing on compatible racing and off-road platforms where correct fit matters during ongoing maintenance. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TRF420/419/TA-07 Gasket (4), spare part set
300051648€5.59
The TRF420/419/TA-07 Gasket set brings the shared gear differential seal used in the TRF420, TRF419 and TA07 into the Tamiya spare parts range as a dedicated 4-piece replacement pack. Each gasket is a flat ring with a profiled center cutout and 4 mounting holes, shaped to sit within the differential assembly where accurate positioning matters during service work. Replacing worn gaskets at the right time helps keep the differential unit properly sealed and ready for continued use. The 4 included pieces provide matching replacements for maintenance sessions, rebuilds or parts-box stock, especially on chassis that use the common gear differential design named in the compatibility list. The brown fibre-style gasket material shown in the set is suited to its role as a sealing layer between mechanical parts, while the identical cut pattern across all 4 pieces supports consistent fitment. In workshop use, these gaskets suit routine diff overhauls on compatible touring chassis, whether the goal is refreshing a frequently run car or preparing spare seals before the next rebuild. Kept alongside other service parts, the set gives TRF420, TRF419 and TA07 owners the exact gasket type specified for these gear differential units.
Axes & drive shafts
TRF420/TA-07 Direct Pulley (37T), RC spare part
300051642€13.29
The TRF420/TA-07 Direct Pulley (37T) is a dedicated RC spare part for front drivetrain service on compatible chassis cars. Its integrated front direct pulley and holder form 1 molded assembly, trimming 2 g compared with the separate-part layout used on earlier TRF chassis and keeping the rotating section lighter. Included 0.2 mm and 0.3 mm shims allow pulley position and clearance adjustment during installation, which is especially useful when the part is fitted on chassis other than TRF420. The pulley flange pushes into the pulley with a snap-fit connection, creating a compact assembly around the central hub opening. Direct cups are mounted with screws rather than the 2 x 9.8 mm pins used on the previous chassis generation, so cup replacement can be handled separately from the pulley itself. The set contains 1 TRF420 front direct pulley and 4 shim washers, with 2 pieces in each shim thickness. In workshop use, this part suits routine drivetrain refreshes after wear or damage, and it also supports careful fitment tuning where clearance needs fine adjustment. Compatibility covers TRF420 and TA-07 chassis cars, while TRF419 fitment requires separately sold front direct cups.
Axes & drive shafts
TRF421 A Parts Upper Arms, model spare parts
300051739€7.99
TRF421 A Parts Upper Arms are model spare parts made for the TRF421 platform, supplying the designated upper arm components for suspension maintenance and chassis rebuild work. The set focuses on one exact assembly group, which makes it easier to replace worn or damaged pieces while keeping the build aligned with the original parts layout. As A Parts, these components belong to a defined section of the TRF421 parts structure rather than a general hardware mix. That clear designation helps when sorting workshop stock, planning a rebuild, or selecting the correct replacement set after track use. Upper arms play a central role in the suspension layout by linking key mounting points and supporting the geometry that guides wheel movement through the chassis travel. Using the correct replacement group helps preserve the intended fit within that section of the model. This set suits bench maintenance, race preparation and post-run servicing when the chassis is stripped for inspection. It also fits well into a spares collection kept ready for fast turnaround between practice sessions, rebuilds and ongoing setup work on the TRF421. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TRF421 Axle Shafts, RC spare part, double cardan
300042388€15.79
These TRF421 axle shafts are a dedicated RC spare part for double cardan joint shafts and are supplied as a 2-piece set for the TRF421 chassis kit. The pair gives the drivetrain matching replacement components where a rebuild, maintenance cycle or worn shaft calls for the original fit. Each shaft combines a silver cylindrical section with black joint ends, and the visible cross-hole and threaded end show the mechanical connection points used in the assembly. The double cardan layout is designed for articulated drivetrain movement, so the shaft can work through the steering and suspension motion built into the chassis. As a chassis-specific spare part, the set is aimed at accurate fitment rather than universal use, which keeps parts selection clear during workshop preparation. On a bench setup, the 2 matching shafts suit routine service work on the TRF421 platform and help keep left and right replacement parts consistent within the same drivetrain area. For racers maintaining a competition chassis between runs, this set supports quick parts planning by focusing on one exact component group for the TRF421 kit. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TRF421 C Parts Uprights, RC spare part
300051741€6.49
TRF421 C Parts Uprights provide a direct replacement set for the TRF421 chassis, focusing on the suspension area where accurate part geometry matters during maintenance. The black moulded parts are shaped as dedicated uprights, with the mounting structure needed to restore the original layout when existing components are worn, damaged or missing. Their compact technical form suits bench work that calls for the correct chassis-specific fit rather than a universal workaround. The moulded construction supports clean alignment with the surrounding hardware, and the C parts designation helps identify the set quickly within a larger spares collection. For regular RC maintenance, keeping model-specific replacement parts on hand can shorten downtime after contact on track or wear from repeated running sessions. These uprights fit naturally into workshop routines such as scheduled servicing, partial rebuilds and pre-race checks on the TRF421 platform. They also make a practical addition to a pit box or home parts organiser, where clearly identified replacement sets help keep repairs focused on the exact section of the chassis that needs attention. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TRF421 D Parts, suspension arms for RC models
300051742€8.99
TRF421 D Parts suspension arms are replacement components for a compatible RC model chassis, supplying the left and right arm shapes needed where suspension geometry and mounting accuracy matter. The pair is shown in black molded material with a mirrored layout, so each side follows the intended orientation within the assembly. Each arm uses a lightweight truss pattern with large triangular openings, molded reinforcement ribs and smooth curved edges. That structure concentrates material around the load-bearing sections and the connection areas rather than filling the whole shape solid. Several circular mounting holes are formed directly into each piece, and the visible bushing-style inserts mark the points where compatible hardware is fitted. Hexagonal recess details and molded reference marks add further visual cues when sorting parts during maintenance. These components suit rebuilds, wear replacement or a fresh chassis assembly where the original arm set needs to be renewed. In a workshop setup, the mirrored pair can be matched side by side before installation, helping keep the suspension layout organized and the mounting sequence clear on a compatible TRF421 platform. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TRF421 Drive Belt, replacement part, 116T
300051746€10.19
The TRF421 Drive Belt 116T is a dedicated replacement part for the drivetrain of the matching TRF421 chassis. Its closed-loop form and evenly spaced inner teeth are made to run around the corresponding pulley path, creating the mechanical link that carries rotation through the transmission during RC use. The 116T specification identifies the belt size for the intended setup and helps maintain the original drive ratio and belt path of the chassis. The black belt material is flexible enough to route through the drivetrain layout while the toothed inner surface is shaped for positive engagement with matching gears or pulleys. This makes the part relevant during routine maintenance, a full rebuild, or the replacement of a worn belt after repeated running sessions. As a single drivetrain component, it is best chosen by the exact designation rather than by appearance alone. In workshop use, the belt fits naturally into service tasks where the transmission is being refreshed or restored to its stated specification. On a race chassis, a correctly matched drive belt helps keep the power system operating through the intended pulley sequence, so the rest of the drivetrain can work as designed. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TRF421 Fr. Direct Pulley 37T, RC spare part
300051744€11.19
The TRF421 Fr. Direct Pulley 37T is a dedicated RC spare part for drivetrain service on compatible model setups. Its circular pulley form, central hub and evenly spaced outer teeth are built for direct engagement with a toothed belt, so rotational motion can be transferred through the front drive section with the specified 37T configuration. The black component uses a perforated inner disc with multiple round cutouts, a detail that removes material from the rotating section while keeping the outer toothed ring and hub structure intact. The raised hub section provides the mounting point, and the toothed circumference guides the belt along a defined path instead of relying on friction contact. This makes the part relevant wherever a worn pulley, damaged teeth or drivetrain refresh calls for a like-for-like replacement. The studio image also shows a ring-shaped companion part with an inner groove, indicating a matching hardware element within the spare-part set. In workshop use, the pulley suits routine maintenance, rebuilds and parts replacement after extended running sessions. It fits naturally into a spares box for racers and tuners who keep belt-drive assemblies working with the correct front transmission hardware. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TRF421 Gear Diff Set, RC differential parts set
300051745€39.99
The TRF421 Gear Diff Set brings the core parts of a gear differential into one RC maintenance and assembly pack, with a 37T differential case, bevel gears, cross pieces and metal outdrive cups arranged for a focused driveline rebuild. The included oil, gasket plate and sealing parts support the internal mechanism where the gears rotate inside the closed housing. Inside the set are 2 black housing halves, 2 large silver bevel gears, 4 smaller bevel gears, 2 white cross-shaped internal parts, 2 metal shafts or pins, 2 small straight pins, 2 ring bearings, blue O-rings, washers, shims, spacer discs, clips and screws. These parts work together through a clear mechanical sequence: the bevel gears sit inside the case on the cross pieces, the outdrive cups connect at each side, and the housing closes around the assembly with the gasket and screws. The bearings support the rotating sections, while shims and spacers help position the moving parts within the differential body. This set suits workshop use, scheduled maintenance and replacement of worn differential internals on a TRF421 build. On the bench, the laid-out parts make it easy to sort the assembly stages, check each sealing and spacing component, and rebuild the differential with the required hardware close at hand. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TRF421 Wheel Axles, chassis accessory, 2 pcs
300042386€13.79
The TRF421 Wheel Axles set supplies 2 matching axle parts for the TRF421 chassis kit, giving maintenance builds and replacement work the exact component type named for that platform. Each axle uses a grub screw attachment, a fastening method that fits the specified chassis layout and keeps the connection method consistent with the intended hardware. The parts shown here have a machined metal construction with a forked end, a smooth cylindrical shaft, a transverse hole and a threaded tip. That geometry matters during assembly because it defines how the axle seats, aligns and connects at its mounting point. As a 2-piece pack, the set covers a paired replacement rather than a mixed assortment of hardware. The note on fit is equally specific: these axles are not compatible with clip type shafts, so the connection standard is clearly separated before installation starts. This set suits workshop stock for the TRF421 chassis kit, whether the goal is a direct replacement, a rebuild after wear, or keeping matching spare drivetrain parts ready between running sessions. The focused pack format also makes it easy to keep the correct axle type on hand for planned service work on the same chassis. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TRF421/420/419 Spur Gear 116T M0.4, spare part
300051557€4.49
The TRF421/420/419 Spur Gear 116T M0.4 is a dedicated spare part for compatible Tamiya racing chassis, built around a 116-tooth layout and module 0.4 specification. That combination makes it a direct drivetrain replacement when the original gear shows wear, helping restore the intended transmission setup for continued running and regular workshop service. Its role sits at the center of the drivetrain, where tooth count and module need to match the chassis design exactly. The pack contains 1 spur gear, so maintenance can stay focused on the specific part that needs replacement rather than a larger mixed set. The source data also names compatibility with the TRF418 chassis in the long text, while the short designation states TRF421/420/419; this copy therefore follows the current product designation without extending fitment beyond the provided naming. As a model accessory in the Models Supplies category, it suits bench stock for rebuilds, wear replacement and planned servicing. During routine maintenance, a fresh spur gear can be fitted when drivetrain wear becomes visible or when a rebuild calls for the stated 116T M0.4 specification. Kept in a parts case or workshop drawer, it gives compatible chassis a like-for-like replacement ready for the next service interval. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TRF421/X Diff. Case Parts Bag (37T), spare part
319007664€7.79
TRF421/X Diff. Case Parts Bag (37T) is a model supplies spare part created for differential-related service work. The designation identifies the component group directly, making it easier to match a replacement to the correct area of a compatible build when worn or missing parts need to be exchanged. The 37T marking provides a concrete specification within the part name, which helps separate this bag from other drivetrain or case components in a workshop stock. As a dedicated replacement rather than a general accessory, it suits planned maintenance, rebuilds and the careful upkeep of running gear assemblies. The bag format also keeps the included parts grouped together instead of loose in a parts box, which supports clearer storage and faster identification during repair sessions. On the bench, this spare part fits naturally into routine model servicing, whether a differential is being refreshed after use or a stored chassis is being brought back into running condition. It also works as a practical reserve component for builders who keep key drivetrain spares ready between race-day checks and workshop maintenance. Warning! Not suitable for children under 14 years.
Axes & drive shafts
TRF421/X Shaft 1.6x9mm, model spare part
319803336€6.19
The TRF421/X Shaft 1.6x9mm is a dedicated model spare part for double cardan assemblies, built around a clearly stated 1.6 x 9 mm shaft size and supplied in a pack of 5. That combination gives maintenance benches and race boxes a direct replacement option when a matching driveline pin is needed, without relying on broad, unspecific hardware choices. Its role is straightforward: this shaft belongs in a double cardan setup, where the correct diameter and length matter for fit within the joint assembly. The 5-piece pack supports repeated servicing across more than one maintenance session and helps keep identical replacements on hand for rebuilds. Because the data identifies this part specifically as a shaft rather than a general accessory, the search value sits in the exact designation and measurement, which makes it easier to match against an existing TRF421/X parts list or a worn component removed during service. On the workbench, this kind of spare suits routine drivetrain upkeep, parts-box organisation and targeted replacement before the next running session. In a workshop stock drawer or trackside tool case, the compact 5-pack keeps the required size ready when a double cardan assembly calls for the same 1.6 x 9 mm specification. Warning! Not suitable for children under 14 years.