RC truck accessories
Small parts for big vehicles: discover high-quality tyres, rims, electronics and a wide range of accessories for your RC trucks: for optimum performance and customisation.
RC truck accessories
Small parts for big vehicles: discover high-quality tyres, rims, electronics and a wide range of accessories for your RC trucks: for optimum performance and customisation.
More
Basic accessories
1:14 Drivercabine for 56314, body shell
309335393€47.99
This 1:14 driver cab body shell is made for model 56314 and gives truck builders a dedicated replacement or build component for the upper exterior section. Formed as a single white cab piece, it presents the main outer surfaces in one unified shape, making it suitable for restoration work, parts replacement or a fresh custom finish. The shell arrives unpainted, which keeps the surface ready for sanding, priming and paint application according to the chosen livery. Moulded contours define the hood, side sections and roof panel, while the cutout areas for the windshield, side windows, door opening and roof opening establish the cab layout before further detailing begins. As a standalone exterior component, it is suited to projects where the original cab needs replacement or where a separate body section is required for a specific build stage. On the bench, the formed openings and panel structure help guide alignment with the matching model during test fitting and finishing. In a workshop setup focused on scale trucks, this cab shell can serve as the basis for repainting, repair work or a second body prepared in a different scheme. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Drivercabine Parts Bag, cab component
319335808€68.99
This 1:14 Drivercabine Parts Bag supplies a replacement cab shell for model truck work where the upper body section needs to be renewed, repaired or prepared for a fresh build stage. The white moulded cab brings the exterior form back into place with shaped front contours, side walls and a roof section that establishes the vehicle's visible structure. The shell is presented unpainted, which leaves the surface open for custom colour application and project-specific finishing. Moulded recesses and panel detailing give the part a defined appearance before further components are added. Multiple holes and fixing points are built into the cab section to support attachment during assembly, while the roof opening with its cross-shaped support shows the part's prepared construction. As a dedicated cab component, it suits workshop use where an existing model needs a fresh body section rather than a complete new kit. On the bench, the part fits naturally into repair, restoration and parts-replacement tasks for 1:14 scale truck modelling. It can also serve as a spare kept ready for ongoing maintenance projects, repaint work or the staged completion of a matching vehicle build.
Basic accessories
1:14 Ford Aeromax driver cab body, model part
300335157€50.99
This 1:14 Ford Aeromax driver cab body brings the distinctive long-hood truck silhouette into a model build with a molded shell that is ready for fitting, finishing and individual detailing. The white body part shows the full cab form clearly, from the front hood line to the roof and side sections, creating a strong visual base for a scale truck project. The shell is shaped with window apertures, roof cutouts and mounting holes already formed into the molding, so the main structure is defined before paint and trim work begin. Side panel lines add surface detail that helps the cab read convincingly once assembled on a matching chassis. The molded construction also leaves room for different finishing approaches, whether the goal is a clean road truck look, a working fleet style or a more custom presentation. As a dedicated body component, it suits restoration of an existing build as well as replacement during a rebuild. On the bench, the shell supports careful test fitting, painting and detail work around the cab openings and body lines. In a completed 1:14 truck model, the Ford Aeromax form gives the vehicle a recognisable road-going character that stands out in display settings and scale transport scenes. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Globe Liner driver cab, model body shell
309335165€54.99
This 1:14 Globe Liner driver cab body shell is a dedicated replacement body part for the 56304 truck platform. The cab section restores the distinctive upper structure of the Globe Liner and gives repair, refurbishment or continuation builds the correct visual base for a matching road truck model. As a separate body component, the shell is suited to projects where the original cab has been damaged, worn or set aside for a new finish. The 1:14 scale keeps the proportions aligned with the corresponding truck format, while the cab-focused design concentrates on the part that defines the model's road-going character. For workshop use, this kind of replacement part helps maintain continuity across long-running builds and supports careful upkeep of an established truck collection. On the bench, the body shell can be prepared for fitting and finishing as part of a restoration or spare-parts plan. It also suits modelers who keep key exterior components ready for future repairs, so an existing 56304 truck can return to a complete Globe Liner appearance with the correct cab section in place. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 King Hauler Drivercabine, body shell
300335129€53.99
The 1:14 King Hauler Drivercabine body shell brings the unmistakable outline of a classic truck cab into a scale build, with a boxy front section, shaped front fenders and a large rear box compartment formed in one exterior piece. The unpainted white shell gives custom projects a clean starting point for color, trim and surface detailing. Openings for the 2 front windshields, side windows, roof section and light or accessory fitment are already defined in the molding, which helps guide finishing and installation work. The surface carries molded door lines, panel breaks and rivet-style details that stand out once paint, lining or weathering is applied. The rear section adds utility box door contours and rounded upper edges, giving the body more visual depth than a plain smooth shell. As a replacement body for 56301, it suits rebuilds where the exterior needs a fresh cab structure rather than a full new truck. On the bench, the shell supports careful masking, painting and detail picking with a clear set of molded reference lines. In a completed 1:14 display or RC truck project, the defined cab shape and rear body contours give the model a purposeful road-going presence. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 M-B Actros Drivercabine, model cab shell
319335685€53.99
This 1:14 Drivercabine M-B Actros is a replacement cab shell for scale truck builds that need the correct outer front structure again. The white molded body captures the main cab form with a large windshield opening, side window apertures and defined exterior lines that give repainting or restoration work a clean starting point. The shell is shown as an unassembled body component rather than a complete truck, so the focus stays on fit, shape and finishing potential. A large roof opening with cross braces is molded into the upper section, adding another distinct structural area for builders working on a faithful rebuild. Small mounting holes and formed attachment points are already present in the shell, which helps when matching the part to an existing compatible assembly. The side wall cutouts and front lower section continue the cab geometry and keep the overall silhouette consistent with the stated Actros designation. On the bench, the cab shell suits repair projects, replacement of worn bodywork or a fresh paint scheme on a scale lorry. In a display build, the crisp molded surfaces provide a clear base for glazing, trim details and exterior colour work that brings the truck cab back into a complete road-going look.
Basic accessories
1:14 M-B Arocs 3363 Drivercabine, model part
319335774€45.99
This 1:14 Drivercabine M-B Arocs 3363 is a dedicated model part for the Tamiya truck platform referenced as 56352. It focuses on the cab section that defines the front profile of the M-B Arocs 3363, making it a useful choice when an existing build needs the correct upper body section restored or replaced. The designation links this part directly to the matching truck version, which helps keep repair and rebuild work aligned with the intended model rather than relying on generic body components. In workshop use, a cab-specific replacement can help return a display truck or running build to a more complete appearance after wear, damage or a body refresh. The 1:14 scale keeps it consistent with the corresponding truck format, and the Drivercabine naming makes its role within the overall vehicle structure clear. It fits naturally into spare-parts storage, planned rebuilds and detail-focused maintenance sessions where the cab area is the section being renewed. For collectors and truck model builders working on the 56352 platform, this part supports accurate continuation of the original Arocs configuration.
Basic accessories
1:14 Mercedes-Benz Actros 3363 Sticker Set
319495885€26.99
This sticker set is made for the 1:14 Mercedes-Benz Actros 3363 6x4 Gigaspace RC truck and brings the finishing layer that turns painted bodywork into a recognisable scale replica. Long black stripe decals, grey trim sections and a large panel marking give the cab and body sections the printed accents seen on the full-size vehicle, creating a cleaner and more complete final appearance. The sheet also reaches into smaller areas that shape the overall realism of the build. Dashboard graphics, instrument clusters, switch panels, vent details and console markings add printed definition inside the cab, where plain moulded surfaces gain a more technical look. Multiple licence plate decals marked S-MB3363 are included alongside country identifiers and alphanumeric markings, allowing the model to carry road-style details across front and rear positions. Brand and model graphics such as Actros, Mercedes-Benz, Truck of the Year and BLUETEC markings support accurate badging across the exterior. Reflective warning panels, red triangular reflectors, ON and OFF labels, and caution markings for motor heat and rotating parts extend the sheet to functional-looking zones around the truck. Applied during the finishing stage, these printed elements help tie together cab, trim and mechanical areas so the completed model reads with more scale-specific character on the shelf or on the road. Warning! Not suitable for children under 14 years.
Rims
1:14 Metal Plated Rear Wheels, option wheel set
300056518€13.49
These 1:14 Metal Plated Rear Wheels bring the restrained, natural-metal look of full-size logistics trucks to an R/C tractor truck build. The matte metal-plated finish changes the visual tone compared with kit-standard gloss wheels, giving the rear axle area a more understated commercial-truck character when the model is parked, displayed or running. The set is intended as an option wheel set for 1:14 scale R/C tractor trucks and is designed around tires with 22 mm width. That measurement matters at the planning stage, because it keeps the wheel choice tied to a specific tire format rather than a general truck theme. The flat fin design and the detailed wheel face help capture the look of steel or aluminum wheels often seen on working trucks in logistics networks. As a replacement set, these wheels focus on appearance rather than altering the truck's basic mechanical concept. They suit refresh projects, repair work and visual reconfiguration of an existing tractor truck, especially when a build calls for a less reflective finish than the standard plated parts. On a highway tractor, fleet-style hauler or workshop rebuild, the matte surface and commercial wheel styling can shift the whole stance of the model with a single component change. Warning! Not suitable for children under 14 years.
Rims
1:14 OR RaceTruck Whl FR, wheel set, white ABS
300054964€11.29
This 1:14 OR RaceTruck Whl FR wheel set brings a clean white finish and dedicated racing truck styling to compatible RC builds. The set contains 4 wheels in a 2 front plus 2 rear layout, with molded ABS construction and rim faces that show bolt detailing and vent openings for a purposeful competition look. The white surface works in 2 ways: it can stay unpainted for a bright, crisp appearance, or it can be painted to match a custom body scheme and livery. Front and rear wheels share the same 25 mm width and 42 mm diameter, which keeps the rim format consistent across the truck. The deep barrel shape and central hub opening are designed for use on on road racing truck applications, and the set is intended for pairing with On Road Racing Truck Tires, Item 51589. Compatibility is stated for TT-01, TT-01 Type-E and TT-02 chassis models. On a bench build, the set gives a straightforward route to replacing darker or plated rims with a white alternative that changes the visual character of the truck. In a race-inspired display or a finished running model, the crisp color and molded face details stand out clearly against bold body graphics and sponsor-style paintwork.
Tyres
1:14 Race-Truck Wheel-Set, model wheels, 26 mm
300099646€31.99
This 1:14 Race-Truck Wheel-Set brings the focused look of a competition truck build into a dedicated replacement and upgrade set. The pack contains 2 front wheels and 2 rear wheels, creating a complete 4-wheel layout for model truck projects that need matching fitment across both axles. With a 26 mm wheel size, the set adds a clear dimensional reference for builders planning a consistent stance and proportion on a 1:14 race-truck chassis. As a wheel set rather than a full vehicle kit, the emphasis stays on precise fit and coordinated appearance. The front and rear allocation helps maintain the intended layout of a race-truck build, while the 4-piece configuration suits restoration work, parts replacement and custom workshop planning. The 1:14 scale makes the set relevant for truck modelling projects where visual accuracy and component compatibility matter more than generic spare parts. On the bench, the set fits naturally into rebuilds that call for a fresh wheel group after wear, or into custom projects that need a dedicated race-truck look. It also works well for keeping a matching spare set ready for future maintenance on 1:14 truck models. Warning! Not suitable for children under 14 years.
Rims
1:14 RaceTruck Whl FR, wheel set, black
300054741€11.19
The 1:14 RaceTruck Whl FR wheel set brings black racing truck rims to compatible Tamiya semi-truck builds, with 2 front wheels and 2 rear wheels shaped for the dedicated RaceTruck format. The black molding changes the visual character of the truck immediately, giving the wheel area a darker, more competition-focused finish when the model is on the track or on display. Each rim shows circular ventilation-style cutouts around the outer face and a multi-bolt hub pattern at the center, details that echo full-size racing truck wheel design. The deeper barrel profile adds visual depth once tires are mounted, and the front and rear wheel pairing keeps the setup aligned with the intended truck layout. This set is described as a black variant of the stock wheels used on the Team Hahn Racing MAN TGS semi-truck kit, making it a direct styling alternative within the same format. Compatibility is stated for TT-01E and TT-02 chassis machines. On-road racing truck tires Item 51589 are used to complete the running setup. Mounted on a race truck body, the black rims sharpen the contrast around the wheel arches and suit repaint, restoration, or replacement work on an existing chassis. The set also fits neatly into parts planning for a fresh semi-truck build where wheel color and scale-style detailing matter as much as chassis compatibility.
Basic accessories
1:14 Scania Drivercabine, model body for 56318
309335474€47.99
This 1:14 Scania drivercabine body is a dedicated replacement cab for the 56318 truck model, bringing the correct upper structure back to a build that needs a fresh shell. The focused format makes it useful for restoration benches, repaint work and repairs where the original cab has been damaged or worn through regular handling. As a separate body component, the drivercabine can be kept in reserve for maintenance cycles or used as the starting point for a new exterior finish on an existing 1:14 truck platform. The Scania form gives the model its recognizable road-going presence, while the spare-body role keeps the work centered on the visible cab section rather than a full rebuild. For collectors and builders maintaining a fleet, a dedicated replacement shell helps preserve the intended appearance of the 56318 configuration. On the workbench, this cab body fits naturally into repair, repaint and refurbishment tasks where the upper truck section needs to be renewed. It also suits long-term parts storage for larger scale truck models, ready for the moment a running or display build calls for a correct Scania cab replacement. Warning! Not suitable for children under 14 years.
Rims
1:14 Trailer Wheels 30mm BB, RC truck accessory
300056520€10.99
These 1:14 Trailer Wheels 30mm BB are option accessories for R/C tractor trucks and semi-trailers, created to shift the look away from the kit-standard gloss finish and toward a flatter natural-metal wheel style. The matte metal-plated surface gives the wheel area a more restrained, work-truck character that suits steel or aluminum wheel references on full-size tractor trailers. The set contains 2 wheels and is sized at 30 mm BB for use on compatible 1:14 scale truck builds. Rather than changing the vehicle layout, this accessory focuses on visual customization through a direct wheel swap. The deep wheel form and circular hole pattern shown in the parts design add mechanical detail around the hub area, while the flatter chrome effect keeps the finish closer to a plain metal appearance than a bright polished look. As an option part, it supports builders who want a different finish treatment on a truck or trailer already in service. Compatibility is stated for the rearmost axle on a 3-axle Tamiya Tractor Trailer and for the front wheels on Mercedes-Benz Actros #56335. That makes the set useful when matching wheel style across selected axle positions or when refining one section of a larger 1:14 road truck build with a more understated metal-plated look. Warning! Not suitable for children under 14 years.
Rims
1:14 Trailer Wheels, accessory set, 30mm hex
300056519€10.49
This 1:14 trailer wheel accessory set gives R/C tractor trucks and semi-trailers a different visual character through a matte metal-plated finish and a flat chromed look. The 30 mm hex mounting format is tailored to trailer applications, and the plain natural-metal style mirrors the steel or aluminum wheels often seen on full-size tractor truck combinations. The set contains 2 wheel units and matching hardware parts shown for the wheel assembly. Around the center hub, the wheel faces use bolt-detail styling and evenly spaced circular openings that reinforce the commercial vehicle look at 1:14 scale. Used in place of kit-standard gloss finish metal-plated wheels, these parts shift the appearance toward a more understated, work-truck presentation. The fitment note is specific: use is limited to 3-axle trailers equipped with single axle 30 mm wheels. Mounted on a compatible semi-trailer, the wheels suit display builds that aim for a plain fleet-style finish as well as running models that need a coordinated trailer update. The flatter surface treatment changes the visual balance of the undercarriage and helps a tractor-trailer combination read closer to a full-size road setup. Warning! Not suitable for children under 14 years.
Rims
1:14 V-Parts Truck Twin-Wheels, model accessory
300445258€14.49
The 1:14 V-Parts Truck Twin-Wheels add a distinct heavy-truck look to compatible model builds with a chrome-coloured finish, deep-dish rim form and a paired wheel layout in 1 assembled wheel unit. The reflective surface and drilled wheel-face pattern give the running gear a more scale-focused appearance when the truck is viewed from the side or rear. The outer face shows evenly spaced circular openings and a raised centre section, while the inner side uses a bowl-shaped rim profile with a central hub opening for mounting. A connecting centre ring joins the 2 wheel halves into the twin-wheel format, creating the visual width associated with truck rear axles in 1:14 scale. As a dedicated accessory part, this wheel unit suits repair work, replacement of worn components or detail-focused custom projects where matching axle hardware matters. Mounted on a compatible 1:14 truck model, the twin-wheel design helps complete the look of a working road tractor, display build or workshop conversion. It also fits neatly into parts-led projects where a single wheel assembly is needed to restore symmetry or refresh the finish on an existing chassis. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Warning-Sticker Set Tractor/Trailer, decal set
300056534€20.99
The 1:14 Warning-Sticker Set Tractor/Trailer brings full-size freight detail to scale truck builds with a broad sheet of markings for cab and trailer surfaces. European truck-style graphics, service labels and route identifiers give a model the visual language of commercial transport, whether the goal is a clean road hauler, a tanker-style layout or a more heavily marked working rig. Alongside warning panels and speed limit signs, the sheet provides national identification marks plus separate letters and numbers for custom numbering and vehicle-specific combinations. This opens up more than one fixed look: trailer sides, rear panels, fuel areas and service points can be arranged with different label groupings to match the chosen theme. The mix of operational notices and identification graphics helps smaller scale details read clearly once applied, especially on larger 1:14 truck bodies where open panel space benefits from realistic markings. The set is usable with any 1:14 scale tractor truck body, making it a practical choice for new assemblies and for updating an existing cab or trailer with fresh graphics. On the bench, the sheet supports careful finishing work; on a completed display or running model, the added signs, codes and warnings give the truck a more convincing long-haul presence. Warning! Not suitable for children under 14 years.
Electronic
2-Way Connector, Y-Cable for MF-Units
307255032€7.59
This 2-Way Connector is a Y-cable for MF-Units, built to create a clean split from one lead into 2 connection paths within model electronics. The red and black wire pairs make polarity easy to follow at a glance, which helps when arranging power or signal leads in compact RC installations. The cable uses flexible insulated wiring that can be guided around nearby components instead of demanding a straight run. That matters in enclosed hulls, chassis compartments, or other tight model spaces where cable routing affects both fit and access. The simple branch format also suits replacement work, maintenance, or custom wiring changes when an MF-Unit setup needs an additional linked connection. The visible wire marking shows 80°C AWM on the insulation. As a model electronics accessory, this connector fits naturally into workshop tasks such as repairing an existing wiring layout, extending a compatible branch, or preparing a neater internal cable arrangement before final assembly. It is a focused choice for RC builders working with MF-Units and related electrical installations. Warning! Not suitable for children under 14 years.
Basic accessories
3-Axle Frame L/R, model spare part for trucks
304005128€48.99
The 3-Axle Frame L/R is a dedicated spare part set for Scania R620 and MAN TGX model trucks, supplying 2 matching black metal side rails for the chassis structure. Each rail has a long, straight profile with bent side flanges and a series of round mounting holes, giving the frame section the correct base for replacement or repair work. The left and right rails are shaped as a mirrored pair, which suits their role as side members in a truck chassis layout. The hole pattern runs along the length of each piece in several sizes, allowing attachment points for adjoining components where the original frame section needs to be restored. The metal construction adds the rigid, hardware-like character expected from a structural chassis part, while the narrow channel form helps the rails sit as defined frame elements rather than flat strips. The image data shows a clean black finish that matches the technical look of scale truck running gear. This set fits projects centered on Scania R620 or MAN TGX model truck maintenance, rebuilds, or parts replacement. It suits workshop tasks where a worn, missing, or damaged frame section needs the correct left and right rail format to bring the chassis back into working order. Warning! Not suitable for children under 14 years.
Electronic
3mm MFC LED-Set, model lighting accessory
300056521€18.79
This 3 mm MFC LED-Set adds light amber illumination to compatible model truck builds, giving lamp positions a yellowish-white tone modeled on halogen lighting. The clear LED format keeps the visual focus on the installed light effect, making it suited to scale applications where the lamp housing itself should remain unobtrusive. Developed for the Tractor Truck Option Parts Series, the set is part of the latest additions to the Tamiya LED light range. The wired layout shown in the set supports integration with a multi-function lighting setup rather than a standalone loose diode fitment. The included connection format is intended for use with the Pick-Up Truck Multi-Function Control Unit MFC-02 53957 as well as the Tractor Truck Multi-Function Control Units MFC-01 and MFC-03 56511 and 56523. This makes the set a focused choice for builders matching lighting tone and control compatibility within the MFC system. In use, the 3 mm size suits model lamp positions that call for a compact light source, whether updating a truck front end, refining a scale lighting layout, or replacing an existing compatible LED. The amber output works especially well where a warmer road-going lamp appearance is preferred over the cooler bluish-white look associated with HID-style lighting. Warning! Not suitable for children under 14 years.
Basic accessories
A-Parts A1-A33 Tools, model parts for 56014
300005837€9.79
This spare parts frame is made for the M4 Sherman 56014 kit and provides the A-Parts A1 to A33 set in 1 molded runner with 40 pieces. The layout follows the named A-section structure from the original kit, which helps keep a rebuild, repair or parts replacement consistent with the intended assembly sequence. The connected sprue format keeps the individual components organized until removal, which supports careful trimming, checking and placement at the workbench. Visible elements on the frame include exterior fittings and tool-shaped components that suit military vehicle detailing, along with larger structural sections and smaller attachment points. Because the set is specified as A-Parts for 56014, it serves as a direct match when original pieces are missing, damaged or needed again during a restoration project. On the bench, the frame suits methodical sorting before assembly and gives model builders a clear reference for locating each numbered section. It also fits repair work on an already started M4 Sherman build, where a single replacement runner can restore continuity without replacing the full kit. Warning! Not suitable for children under 14 years.
Basic accessories
AA-Parts Bag 56360, model parts set, 1:24
319004976€12.49
AA-Parts Bag 56360 provides a focused source of 1:24 replacement components for model work that needs matching molded sections rather than improvised substitutes. The silver gray sprue presents the parts in a clear rectangular layout, making it easy to identify each section before cutting and fitting them into place. Visible on the runner are 2 large curved body shell panels, several long narrow side or trim pieces, 2 seat-like parts, 4 round disc elements and a range of smaller rectangular detail sections. This mix supports repair and restoration jobs across exterior and interior areas while keeping the molded finish consistent from part to part. Because the components remain attached to the frame before use, sorting and checking the needed sections can happen before any piece is removed. The molded 1:24 marking on the sprue gives a direct scale reference for matching work. On the bench, this set fits projects where an original section is missing, damaged or incomplete and a like-for-like molded replacement is needed. It also suits careful stock replenishment for ongoing model maintenance, where having the right shell, trim or detail section ready can keep a build moving without compromise.
Rims
AB Parts Widewheel Front, model wheel parts set
319335674€18.49
AB Parts Widewheel Front is a model wheel parts set for the MB Actros 56335, supplied as 2 chrome-plated components on a sprue with a separate ring detail. The deep-dish rim form, oval ventilation openings and molded lug pattern give the assembled truck a distinctly heavy-duty wheel face with a bright plated finish. The parts are shown unassembled, which keeps cleanup and fitting aligned with the build process of the base model. The additional circular insert with evenly spaced holes introduces another visible layer around the hub area, adding definition that stands out under display lighting. Because this set is specified for the front widewheel position on the MB Actros 56335, it supports an accurate visual match where the truck's steering axle needs the correct rim style rather than a generic commercial wheel. The plated surface also suits restoration of an older build where original front wheel parts are no longer in clean condition. On the bench, these parts fit naturally into a rebuild, parts replacement or detail-focused refresh of the truck model. Once installed, the reflective finish and crisp rim contours give the front end a more complete road-going look in parked display scenes, workshop dioramas or cab-focused shelf presentation. Warning! Not suitable for children under 14 years.
Basic accessories
Aeromax Grille P-Parts, model accessory, chrome
300115234€28.49
This Aeromax grille P-Parts set is a model accessory made for 56309 and focuses on the bright front-end details that shape the finished truck's character. The chrome-plated frame holds multiple molded pieces, including large curved grille elements and smaller matching trim components, so the reflective finish stays visually consistent across the fitted sections. The parts arrive attached to a single sprue, which helps keep the individual components organised during the build or during replacement work on an existing model. Patterned panels, narrow bars and smaller mounting-style pieces add further surface definition where the Aeromax design calls for crisp metallic accents. The molded contours and plated finish bring out edges, openings and decorative shapes that can otherwise look flatter in uncoated form. This set suits repair work on 56309, completion of an unfinished build, or the replacement of worn grille sections after handling and display. On the bench, the grouped layout makes it easier to identify each section before cutting and fitting. Once installed, the chrome details give the front area of the Aeromax model a sharper, more finished presence that matches the style of a highway truck build. Warning! Not suitable for children under 14 years.
Basic accessories
Air Intake M-B Arocs, model parts set, black
319225180€19.99
This air intake parts set for the M-B Arocs supports repair, replacement and detail work on an existing model build. The black injection-moulded runner carries multiple shaped components in one matched frame, giving rebuild projects a consistent finish across visible exterior sections. The sprue layout shows vented grille-style panels, curved housing pieces, bracket and mount elements, circular collar parts and 2 larger tubular intake sections with ribbed shaping. That mix helps cover both prominent body details and the smaller connection points that support a tidy installation. Keeping the parts attached to the runner until use also helps with identification during workshop preparation and staged assembly. The moulded black finish suits applications where matching colour and surface appearance matter during restoration work. On the bench, the set fits naturally into maintenance tasks such as replacing damaged intake details, refreshing a used truck body or completing a project that is missing original components. It also serves as a practical reserve for long-term model upkeep, where having the correct shaped parts ready can keep a build visually complete and mechanically tidy. Warning! Not suitable for children under 14 years.
Electronic
Back Lamp J18, model accessory, LED cable set
307175099€10.99
The MFC LED Back Lamp J18 is a model accessory built around a pre-assembled rear light lead, combining an LED back lamp connection with bundled wiring for a neat electronics fit. Twisted grey and white wires run into a compact transparent connector, creating a clear, organised layout that suits detailed model installations where space is limited and cable routing matters. The lead is gathered at the centre with black tape, which helps keep the wire run together while the lamp connection is positioned in the model. This kind of ready-made harness is useful when an existing lighting setup needs a matching replacement rather than loose wire and connector work from scratch. The transparent plug end gives a direct visual reference during connection, and the slim wire format suits enclosed body sections, chassis areas or scale vehicle interiors that carry lighting functions. On a workbench, the J18 can serve as a replacement part during maintenance or as a dedicated rear light lead in a compatible build. In an installed model, it supports the visual finish of a vehicle with functioning back lamp electronics while keeping the wiring run compact and orderly. Warning! Not suitable for children under 14 years.
Basic accessories
Battery Mount Scania 56371, model spare part
319115568€29.99
This battery mount is an SS Parts replacement for Scania 56371 and serves one clear task within the model: holding the battery in its intended position. As a dedicated spare part, it supports accurate maintenance work when the original mount is missing, worn or damaged. The part is identified in the source data as Battery Mount Scania 56371, which makes it a direct match for servicing that specific model reference rather than a general-purpose accessory. Using the correct replacement part helps keep repair work focused on the affected area and avoids changing larger assemblies when only one mounting component needs attention. That makes it useful for routine upkeep, restoration projects and workshop stock where exact model-specific parts matter. In practical use, this spare part fits naturally into repair sessions, rebuilds after wear, or planned maintenance on Scania 56371. It also suits collectors and builders who keep selected replacement components on hand for future servicing of the same model.
Basic accessories
BB Parts Clear Side skirt S770, model parts set
319007361€8.19
BB Parts Clear Side skirt S770 is a model parts set built around clear molded body-detail components for a matching S770 assembly. The translucent sprue format keeps the parts connected and visible at a glance, so the layout can be checked before any section is removed for fitting. The frame carries numbered groups from 1 to 5, including 4 smaller rectangular inserts on the left and 4 longer curved side elements on the right. This arrangement helps separate the different shapes by function during the build and supports more accurate placement when the body details are added. The molded runner structure keeps each section organized until use, which is especially useful when several similar pieces need to be handled in sequence. The clear material also suits builds where body trim, side detailing or transparent styling parts need a defined finish rather than an opaque look. On the bench, the set works as a focused source for replacement parts, repair work or a fresh body-detail stage within an ongoing model project. The compact sprue layout also makes it practical to inspect, trim and prepare each section in order before the final body assembly continues. Warning! Not suitable for children under 14 years.
Basic accessories
Bevel Gear Shaft, spare part for model 56313
309804180€6.69
This spare part set provides 2 bevel gear shafts for model 56313 and focuses on a precise mechanical role inside a driven assembly. Each piece combines a silver conical gear head with multiple teeth, a circular flange and a short dark shaft with a square drive end, forming a compact component for angled gear engagement. The bevel gear shape indicates use where rotational force changes direction through meshing gear faces rather than a straight spur gear path. The flange supports defined positioning of the part within the surrounding mechanism, while the square shaft end points to a positive drive connection with the matching receiving component. The metal construction shown in the part image suits a technical replacement task where tooth form and shaft geometry matter for correct operation. As a 2-piece set, the pack supplies a matched pair for maintenance or repair on the specified 56313 model. This kind of replacement part fits workshop sessions centered on restoring a drivetrain, gearbox or axle section after wear or damage. It also suits planned servicing when a model is being inspected, rebuilt or returned to running condition with the correct dedicated hardware for the named application. Warning! Not suitable for children under 14 years.
Basic accessories
C Parts Chassis Parts, RC spare parts set
319008208€11.79
C Parts Chassis Parts brings together a focused selection of molded chassis components for Tamiya model vehicle maintenance and rebuild work. The set is supplied as black injection-molded parts on a sprue, a format that keeps small sections connected and easy to sort before they are clipped free for installation. The visible component mix covers several mechanical shapes used around a chassis assembly, including bracket forms, rounded housings, linkage-style pieces and mounting sections. That variety matters when a repair calls for matching geometry rather than a generic substitute, especially where moving assemblies and fixed mounting points meet. The black molded finish gives the set a consistent look alongside existing chassis sections. Because the parts remain grouped on the runner, each piece can be checked against the build step or repair task before removal, which helps keep workshop handling tidy. This spare parts set suits bench repairs, partial rebuilds and the replacement of worn or damaged chassis sections after regular RC use. It also works as a practical stock piece for hobby setups that keep key maintenance parts ready between running sessions and workshop servicing. Warning! Not suitable for children under 14 years.
Basic accessories
C-Parts Crossmember 56323, model spare part
309005933€13.49
C-Parts Crossmember 56323 is a model spare part shaped for structural use within a vehicle assembly. The black molded piece shows a defined crossmember form with multiple circular mounting holes, recessed screw seats and raised posts that help place matching hardware and adjoining sections in the intended positions. The part is presented in front and rear view, making the geometry easy to identify against an existing build before installation. Triangular side bracing and the central bridge layout indicate a load-bearing role within the assembly, where stable connection points matter for chassis-related fit. The visible numbering and molded marking on the sprue section support part recognition when comparing replacement components during workshop sorting or rebuild planning. As a dedicated spare part, it suits repair work, restoration of an older model, or replacement of a worn or missing frame section. Used during maintenance or reassembly, the crossmember helps return a model vehicle to its intended structure by restoring key screw locations and connection geometry. It also serves as a practical reference piece when checking orientation, hole spacing and mounting position against the surrounding assembly. Warning! Not suitable for children under 14 years.
Basic accessories
C-Parts Steering Mounting Set, model spare parts
300005564€27.49
This C-Parts steering and mounting set brings together molded replacement pieces for 2 axle truck assemblies in one clearly organized sprue. The black and metallic silver components are arranged on the runner for straightforward visual reference, making it easier to identify the needed section before removal and installation. The set is described as C-Parts for steering and mounting points, with multiple numbered references visible on the sprue from 4 to 19. Larger frame-like sections sit alongside smaller brackets, linkage-style parts, bushings, spacers, clamps and ring washers, giving the set a technical layout that supports instruction matching and targeted replacement work. The molded runner also carries the C identifier and TAMIYA marking, which helps confirm the correct parts group during workshop sorting. As a spare-parts supply in the Models & Accessories range, it fits practical bench use where worn, missing or damaged molded sections need to be replaced with matching components. On the workbench, the organized sprue format helps keep small pieces together until the required section is selected for the repair. For ongoing truck maintenance, this set supports clean parts identification, orderly storage and accurate preparation before assembly steps begin.
Basic accessories
Cabin Interior L Parts, model accessory for Actros
319115369€20.49
This cabin interior L parts set is a model accessory for the M-B Actros 56335 and focuses on the details that define the inside of the cab. The white molded sprue carries a dashboard, 2 front seats, a steering wheel, long trim elements and smaller control parts that support a more complete interior during assembly. The runner layout keeps each component attached and easy to identify before cutting and fitting. A rear interior panel and narrow side pieces with round mounting holes add further structure to the cabin area, while the smaller lever-like parts extend the control detail beyond the main dashboard and seating. Because the set concentrates on the cab rather than the body shell, it suits builds where internal features remain visible through the windows or open access points. On the workbench, the parts support a focused detailing stage that can change how the finished truck cab reads at close range. Painted and installed to match the chosen build, the interior pieces help create a more convincing driving environment for display, photography or a restoration of the original M-B Actros 56335 configuration. Warning! Not suitable for children under 14 years.
Basic accessories
Cabin Sidepanel S770, model spare part set
319115548€16.79
This spare part set centers on the cabin bodywork for the S770 and provides shaped replacement sections for model repair, restoration or continued assembly. Large side walls with window openings and curved contours define the cabin form, while separate narrow strips and mirrored sections support a clean fit across the body shell. The white molded pieces are supplied on sprues, so each section stays clearly separated until trimming begins. Visible numbering on the frame, including positions such as 2, 3, 4 and 6, helps identify the correct parts before fitting. Wheel-arch cutouts and long side elements point to use on a truck-style or van-style cabin structure, where panel shape matters for matching the original body lines. The unpainted finish also leaves room for sanding, priming and colour matching when replacing worn or damaged exterior sections. On the bench, this set suits careful rebuilds where a cabin side has been marked, broken or lost. It also supports ongoing projects that need fresh body panels before final paint and detail work, keeping the exterior layout consistent across the assembled model. Warning! Not suitable for children under 14 years.
Electronic
Cable Bag for 56313, model accessory, MFC-01/03
309400042€134.99
The Cable Bag for 56313 is a model accessory created for MFC-01/03 LED and cable organization, giving wiring inside the model a more controlled layout. Used with the 56511 application named in the data, it provides a dedicated place to gather leads that would otherwise sit loose around the electronics area. This accessory is centered on cable handling rather than decoration. Grouping LED leads and related wiring in one bag can help keep the installation area clearer when multiple connections run through the chassis or body section. That makes it easier to distinguish routed cables from neighboring components during fitting or later checks. The bag format also suits models that use the MFC-01/03 system, where lighting cables and control leads benefit from being kept together instead of spreading across the interior. During workshop setup, refitting, or electronics maintenance, the cable bag supports a neater internal arrangement and a more orderly view of the installed wiring. It fits naturally into model builds that use lighting functions and cable-based control layouts, especially where several leads need to stay grouped in a defined position. Warning! Not suitable for children under 14 years.
Basic accessories
CC Parts Clear Taillights S770, model accessory
319007362€7.39
CC Parts Clear Taillights S770 focuses on one of the small details that gives a scale build a more finished rear view. The set provides molded taillight components for the S770, making it useful for replacement work, restoration projects or a fresh body finish where the rear light area needs clean, defined parts. The parts arrive on a red sprue frame, which keeps each section organized before removal and helps identify the molded shapes during assembly. The visible material marking indicates PSPS, giving a concrete reference for the composition of the frame and parts. This kind of accessory suits builders who refine body details step by step rather than leaving rear sections plain or incomplete. It can support a tidier result on a rebuild, a repair, or a body shell that is being finished with renewed exterior trim. On the bench, the set fits naturally into careful model preparation, whether replacing missing light pieces or completing a body with sharper rear detailing. In a display setting, the taillight area gains clearer visual definition that helps the finished model read more convincingly from the back. Warning! Not suitable for children under 14 years.
Basic accessories
CC-Parts Bag CC, model parts set, chrome finish
319004946€14.49
CC-Parts Bag CC brings a single chrome-colored sprue into model work where matching plated details matter. The rectangular frame holds multiple small mirrored components together in one set, giving builders a clear starting point for replacing missing sections or completing a specified assembly stage with the correct finish. The molded parts are presented as CC-Parts Bag CC x1 and correspond to reference 56360 in the supplied data. The chrome-colored surface creates a reflective metallic appearance that suits trim and accent areas where a plain molded finish would look different from the surrounding section. Because the pieces remain attached to the sprue before removal, each component can be checked in place and separated only when the build reaches that step. This format also helps keep small parts grouped during bench work and parts sorting. The set fits naturally into repair tasks, restoration of an earlier build, or a fresh assembly that calls for this exact frame. On the work surface, the mirrored finish stands out clearly against tools and cutting mats, helping visual checks before fitting and placement. This is a focused replacement and supply component for model building rather than a complete kit.
Basic accessories
Chassis LR Set, model spare part, shrink packed
314305672€63.99
The Chassis LR Set is a model spare part shaped as a long, slim black metal rail with a straight profile and a series of pre-drilled holes. That layout supports accurate positioning inside a compatible chassis assembly, where a replacement strip needs defined fixing points and a rigid linear form. Its narrow rectangular shape suits structural use rather than decoration, making it relevant for repair, maintenance, or restoring an existing build to working order. The dark metallic finish and perforated construction indicate a part designed to be fastened into place with matching hardware from the compatible model system. Because the holes are distributed along the length of the rail, the strip can align with established mounting positions in the chassis area instead of relying on improvised drilling or reshaping. Shrink-packed supply keeps the part contained in storage among workshop spares until it is needed for a rebuild or replacement job. This kind of chassis component fits naturally into bench work where worn, bent, or missing structural parts need to be exchanged with a matching replacement. It also suits planned maintenance on a model that is being stripped down, checked, and reassembled with fresh chassis hardware.
Basic accessories
Chrome Parts Set, model accessory sprue, black
310115874€19.49
This chrome-plated parts sprue adds bright exterior detailing to a scale truck build, with a reflective finish that gives the front section and side accents a more defined, realistic look once the pieces are fitted in place. The runner layout keeps the plated components grouped together, making it easier to identify each section before removal and assembly. The visible set centers on a large front grille with a diagonal bar and emblem area, supported by 2 large headlight assemblies, smaller lamp units and further trim pieces. Mirror or marker-style parts and side grille or trim panels broaden the plated treatment across more than one area of the body, so the finish does not stop at the nose. Because the parts are supplied unassembled on a single rectangular sprue, the layout also helps with part checking during a careful hobby build. The black base specification in the source data distinguishes this version from other finish variants. On the bench, the plated runner suits builders replacing worn trim, completing a detailed truck body or refining the visual contrast of a custom project. Once installed, the bright accents work especially well on display builds where grille depth, lamp framing and small exterior highlights are meant to stand out at close range. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Glass Panes S Parts for Model Assembly
319115552€13.79
S Parts Clear glass panes 770S adds a dedicated transparent pane set to compatible model assembly work, with molded glazing sections supplied together on a sprue for organized handling at the bench. The set is shown as 6 numbered parts, which helps separate each insert by position before removal and fitting into the body structure. The visible pane shapes include 2 matching curved sections, 1 rounded rectangular insert, 2 angled rectangular panels with cutouts, and 1 taller rectangular panel. This mix supports model areas that need different window outlines rather than a single repeated shape. The transparent molding keeps the focus on visible glazing detail once the compatible build is assembled. Numbering on the sprue also helps track each section during trimming, test fitting, and placement, especially when several openings sit close together on the same body shell. On the workbench, this kind of parts set suits repair of a used build as well as completion of a fresh assembly where the correct clear sections are needed for the body. The sprue format keeps the panes grouped until use, so each section stays easier to sort, compare, and fit during the build process. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Headlight Parts Set for Model Vehicle Bodies
319007360€10.29
This clear parts set adds transparent light and glazing details to a model vehicle body, bringing sharper definition to the finished shell through molded lenses, window-style panels and small exterior inserts. The AA sprue holds multiple numbered components in clear material, while the matching sheet shows numbered sections and placement guidance that help keep each stage of body finishing easy to follow. Small lens-shaped pieces can be fitted where headlight or indicator details are needed, and the larger curved panels suit window or glazing areas that benefit from a separate transparent part instead of painted imitation. The runner includes markings such as AA, 1, 2, 3, 4, 7, 8, 9, 11 and 12, making it easier to match parts to the guide during assembly. The printed sheet also shows orientation examples for a larger rectangular panel section, supporting accurate placement when left and right positions or front and back alignment matter. Together, the clear sprue and guide sheet support a more precise exterior finish on compatible model bodies. This set suits body detailing sessions where light covers, windows and trim elements are added after painting. It also works well when replacing worn clear pieces or refining a shell with more distinct transparent accents and cleaner separation between painted and glazed areas. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Light Bar S770, model spare part insert
319007363€9.29
Clear Light Bar S770 is an EE Parts replacement frame with transparent molded sections for model maintenance, restoration, or parts replacement. The attached clear pieces sit on a single sprue, giving a tidy overview of each shape before trimming and fitting begins at the workbench. The frame image shows several small rounded transparent parts and larger elongated inserts, while the molded marking E2 and the material marking >PS appear directly on the sprue. A separate technical diagram identifies the EE part layout with grouped positions marked 1 and 2, adding a concrete reference for matching the correct section during repair or rebuild work. This kind of spare part suits projects where worn, missing, or damaged clear sections need to be replaced with parts that follow the original molded form. Used during a careful rebuild, the transparent inserts can restore defined light details and clean surface openings on a compatible model. The single-frame format also helps keep all sections together until the required piece is selected for trimming, test fitting, and final installation. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Parts Light Bar Model Accessory Sprue
319000848€12.99
This clear parts sprue is made for Light Bar 56348 model work and provides a set of transparent molded components for replacement, repair or completion tasks. The frame layout keeps each piece attached at defined gate points, so the parts stay organized until trimming and fitting begins at the workbench. The sprue carries several distinct clear shapes, including circular lens-style pieces, narrow rectangular inserts and rounded rectangular panels. That mix supports detail work on a matching model assembly where light covers or other transparent sections need to be restored with parts that match the original molded form. The transparent finish helps preserve the crisp appearance expected in scale builds, especially where visible lighting or panel details sit on the exterior. As a dedicated accessory part set, it suits careful maintenance of an existing build as well as completion of an unfinished project. On the bench, the frame can be clipped section by section to keep handling controlled while each insert is prepared for placement. It fits naturally into repair sessions, spare-parts storage and planned restoration work where a specific clear component is needed instead of replacing a larger assembly. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Parts M-B Actros 56335, model accessory
319000498€11.99
This clear parts set is made for the M-B Actros 56335 and provides the transparent molded sections used where glazing and light details define the finished model's look. The sprue includes a large curved windshield-style section, broad side window pieces and several smaller clear inserts that suit lamp or marker positions, giving a rebuild or replacement job the exact type of parts this area requires. The transparent runner format keeps each piece formed to its intended shape, which matters when cab contours, window openings and lens recesses need a clean visual match. Larger panes handle the main glazed areas, while the smaller round and rectangular sections cover the finer details that complete the front and side appearance. The molded markings on the frame identify it as the AA parts set and show the clear material type used for these components. This accessory fits naturally into repair work, restoration of an older build or completion of a model that needs fresh clear sections after wear or loss. On the bench, the grouped layout helps with sorting before cutting, test fitting and final installation on the M-B Actros 56335. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Parts Sprue for MB Arocs Model Kit
319000957€10.99
This clear AA parts sprue is made for the MB Arocs / 56352 and provides the transparent molded sections that give a scale truck build its finished glazing and light detail. Larger clear pieces on the runner form the main screen or window areas, while smaller round and rectangular sections add the crisp transparent accents that solid body panels cannot reproduce. The parts remain attached to a single molded frame for identification before removal, with visible numbering on the sprue to support part matching during assembly. The material marking >PSPS indicates polystyrene, a common choice for sharply molded clear components with defined edges and consistent fit in model construction. The layout groups multiple shapes on one runner, including curved sections, narrow inserts and plate-like transparent pieces that serve different exterior detail positions on the model. This set works as a practical replacement when original clear sections are missing, scratched or incomplete, and it also supports restoration of an unfinished MB Arocs build. On the bench, the transparent parts help restore the visual contrast between painted bodywork and clear glazing, while the smaller lens pieces sharpen the look of lamps and signal details once fitted in place. Warning! Not suitable for children under 14 years.
Basic accessories
D-Parts Batterybox, model truck spare parts
300005565€23.99
D-Parts Batterybox is a spare-parts set for 2-axle and 3-axle truck models, supplying the batterybox-related components needed when a build calls for replacement or completion of this specific section. The molded parts are arranged on sprues, making each shape easy to identify before cutting and fitting them into place. The set includes multiple glossy molded pieces with distinct structural forms, including bracket-style elements, cover-like sections and a longer central support piece with cylindrical mounting posts, elongated slots and raised platforms. Visible molded numbering such as 2, 3, 4, 6 and 8 helps separate the individual components during workshop preparation. This layout supports careful repair work on existing truck models and also helps keep parts grouped when rebuilding a batterybox assembly from scratch. On the bench, the sprued format makes it easier to compare shapes, check orientation and prepare each section in sequence before installation. For truck model projects with missing or damaged batterybox components, this set restores the correct hardware area with parts made for the stated 2-axle and 3-axle applications.
Basic accessories
DD Parts Bag 56366, model spare parts set
319006949€11.79
DD Parts Bag 56366 is a model spare parts set centered on clear molded components for repair, replacement and careful restoration work. The transparent sprue carries multiple small parts in one organized frame, making it easier to identify matching shapes before trimming and fitting them into the intended assembly. The set includes several circular dome-like pieces in different sizes as well as rectangular plate-like sections with raised central details and small holes. This mix supports targeted replacement where a build needs the correct transparent insert or a shaped panel section rather than a generic substitute. Because the parts remain connected to the molding frame, each piece stays separated and visible until use, which helps during planning, comparison and step-by-step removal with a side cutter or hobby knife. The clear finish also suits applications where light covers, windows or similar visible details need to retain their original look. On the workbench, this set fits naturally into repair sessions, part sorting and ongoing maintenance of an existing model. It also supports rebuild projects where a damaged assembly needs specific molded pieces to restore the intended appearance and fit without replacing larger sections unnecessarily.
Basic accessories
Decal Bag for 56020, model accessory, Leopard 2 A6
309400123€11.69
This decal bag is a model accessory for the 56020 Leopard 2 A6 Main Battle Tank and focuses on the markings that give the finished vehicle its specific identity. The waterslide sheet carries Bundeswehr-style registration plates, tactical numbers, insignia and unit graphics that turn large body panels, turret sides and smaller exterior sections into a more convincing scale replica. Alongside the exterior markings, the set also includes warning decals for the track area and printed reference labels for internal connector points. The warning graphics reproduce the caution markings placed near the rotating tracks and drive sprocket on the full-size vehicle. The connector sheet labels positions such as J5, J12, J13, J14, J16, J17, J18, J19, J20, J22 and J24, with functions including output gun, convoy marker, GFS harness, speaker, machine gun, turret motor, throttle motor, recoil motor, steering motor and flash unit. This gives the accessory value beyond surface finishing by supporting organized identification inside the model. During a fresh build, restoration or replacement job, the sheets help return worn markings and reference labels to the tank with clean, model-specific detail. They also suit careful refurbishment work when a Leopard 2 A6 body, turret or internal layout needs the original printed information restored after use or repair. Warning! Not suitable for children under 14 years.
Basic accessories
Diff. Gear Bag, RC spare parts for 56314
309400028€56.99
This differential gear bag is a dedicated RC spare parts set for model 56314 and centers on the mechanical parts that keep drivetrain power moving through the axle assembly. The assortment shown includes metal bevel gears, differential housings or covers, cross shafts, outdrives and long splined shafts, giving a focused replacement set for service work on the differential section. The bevel gear layout supports the transfer of torque between connected drivetrain parts, while the cross shafts and smaller pinion gears form the internal differential action inside the housing. Cup-style outdrives with cross-pin holes connect the assembly to the next driven parts in the system, and the threaded shaft ends support secure installation where the original hardware layout requires it. The machined metal finish visible across the set points to precise tooth profiles and clean mating surfaces, both important when replacing worn internal transmission parts. On the workbench, this set suits rebuilds after heavy running, routine maintenance, or the replacement of damaged gears inside the axle or gearbox area. It also helps keep a compatible model ready for continued use when a full differential refresh is needed rather than changing single parts one by one. Warning! Not suitable for children under 14 years.
Basic accessories
Diff. Shaft A & B, model spare part for 56301
309805458€13.49
Diff. Shaft A & B is a dedicated spare part for model 56301 and is intended for targeted replacement within the matching assembly. The set contains 2 metal shaft components with distinct end profiles, making it suited to a specific mechanical position rather than general-purpose use. The shafts are shown with threaded ends and machined sections that support accurate seating with the corresponding hardware in the designated model. One component features a rounded end section, while the other uses a narrower pin-style end, indicating 2 different roles within the same mechanism. This defined geometry matters when restoring a worn, bent or missing original part, because the replacement needs to match the existing layout and connection points already built into model 56301. As a model spare part, this set fits maintenance work, repair jobs and parts replacement during a rebuild of the specified vehicle. The compact metal components are easy to store with workshop spares and useful to keep on hand when a drivetrain or linked mechanical section needs the correct shaft pair for continued operation. Warning! Not suitable for children under 14 years.
Basic accessories
Drive Sprocket (2), model spare part for 56019
309805943€35.99
This Drive Sprocket set supplies 2 matching replacement parts for 56019 and focuses on one of the key mechanical contact points in a tracked model assembly. The silver-coloured pieces use a circular toothed rim and a spoke-style inner structure, creating the distinctive technical form expected from drive components that engage with a track system. The hub-shaped centre section adds further definition to the part geometry, with a hollow interior that reflects its role as a fitted mechanical component rather than a decorative add-on. The pair format is useful where both sides of a running system need matching parts or where one spare is kept ready for later maintenance. The studio presentation shows the parts from upright and angled views, making the toothed profile, drum-like centre and open inner detailing clearly visible. As a model spare part, the set is intended for accurate replacement on 56019 rather than general cross-range use. In workshop use, the sprockets suit repair jobs where worn or missing drive parts need to be exchanged with matching components. They also fit restoration work on an existing tracked model, where keeping the original mechanical layout matters as much as the finished appearance. Warning! Not suitable for children under 14 years.
Basic accessories
E-Parts Coupler Plate Servo Saver Truck Parts
300005471€23.99
This E parts set supplies coupler plate and servo saver components for compatible truck model assemblies, giving worn or missing mechanical pieces a direct replacement path. The black molded parts arrive on a single sprue, where each shape remains easy to identify before removal and fitting. Visible numbering on the runner helps separate the individual components during workshop preparation, especially when several small mechanical pieces are handled at once. The sprue format keeps the parts organized until assembly begins, which supports cleaner sorting on the bench and reduces mix-ups between similar shapes. The set is aimed at maintenance and repair rather than decoration, with the focus placed on functional hardware used in steering and coupling-related areas. The molded layout also makes it easier to inspect each piece for shape and fit before installation. On a repair bench, this set supports the replacement of damaged truck parts after regular running or long storage. It also suits planned rebuilds where original steering-related pieces need to be refreshed so the model can return to service with the intended mechanical layout.
Electronic
Electric TR Torque-Tuned Motor 33T RC Motor
300056526€58.99
The Electric TR Torque-Tuned Motor 33T is a brushed upgrade motor developed for 1/14 scale R/C tractor truck models, where strong pulling power and controlled running matter more than outright speed. Its low-turn, high-torque setup helps the drivetrain hold pace in top gear with less speed drop, giving tractor truck runs a heavier, more realistic character when the model is moving under load. The motor is equipped with ball bearings, which support smoother rotation and reduce wear at the shaft supports during repeated use. At 7.2 V, it reaches 12,500 rpm without load and delivers a maximum torque of 39.2 mN-m, with an operating range of 6.6-7.2 V. The tuned response also supports more precise control at lower velocities, which is especially useful when lining up a trailer, easing away from a standstill, or managing steady throttle inputs over longer sessions. Lower power consumption helps extend driving time between charges compared with a more power-hungry setup. Installed in a 1/14 scale tractor truck, this motor suits runs that focus on towing, top-gear cruising and measured acceleration rather than high-speed bursts. It also fits maintenance-minded hobby use, as the brush design can be serviced and the bearing-equipped layout is built for regular running and periodic upkeep. Warning! Not suitable for children under 14 years.
Basic accessories
Exhaust Cover, model accessory, perforated metal
304305294€8.59
This exhaust cover adds a crisp mechanical accent to a scale vehicle build through its curved metal form and evenly perforated surface. The half-round shape reads as a fitted outer sleeve rather than a flat trim piece, so the exhaust area gains more depth and a more purposeful finished look once the cover is in place. The part is supplied as 1 exhaust cover and is shown in a silver metallic finish with multiple rows of round openings across the surface. That hole pattern gives the component a recognisable vented appearance often seen on full-size machinery and transport equipment, which helps small-scale detailing look more convincing in static display views. The open-sided channel form also makes the piece visually distinct from a plain tube or solid shield, adding contour to the side profile of the model. Used during a repair, a restoration or a detail-focused refresh, this component helps bring an older build back to its intended appearance or completes a project that needs the correct exhaust-area trim. It also suits builders who want a clean replacement part ready for workshop stock when maintaining a long-running model. Warning! Not suitable for children under 14 years.
Basic accessories
F Parts Highroof M-B Actros 56335 model parts
319000500€36.99
This F Parts set is identified for the Highroof M-B Actros 56335 and serves as a dedicated model supplies component for that truck project. The naming points to the high-roof cab section, which helps keep a rebuild aligned with the intended form of the original design rather than relying on generic substitute pieces. Within a workshop setup, a clearly designated parts set like this supports more accurate maintenance planning for an existing build. The F Parts label distinguishes this group from other component sections in a larger model structure, while the 56335 reference ties it to a specific Actros variant named in the data. That makes the set useful for replacing worn or missing cab-area elements, preparing a stored kit for completion, or keeping a matching spare on hand for future repair work. On the bench, this kind of dedicated replacement part helps keep truck model projects moving when one section needs attention. It fits naturally into restoration, rebuild, and long-term upkeep tasks centered on the Highroof M-B Actros 56335. Warning! Not suitable for children under 14 years.
Basic accessories
F-Parts Axle 56319, model spare parts set
309005896€33.99
F-Parts Axle 56319 provides a focused spare parts set for model vehicle maintenance, with black injection-molded components supplied on sprues for clean identification before installation. The layout supports precise replacement work when a build needs matching structural sections instead of a complete new assembly. Visible in the set are several distinct molded forms, including 2 long rail-style pieces, 2 curved arm-like sections, smaller linkage or mount-style parts, a bracket pair, 1 upright cylindrical piece and 1 larger rectangular housing. Number markings such as 5 and 6 appear on the sprue, adding a practical reference point while sorting and preparing the parts. The molded format keeps edges and connection points intact until each section is removed, which helps maintain order during bench work. The set is suited to repairs where the original geometry of a specific section matters for alignment and placement. On a workshop table, the sprue format makes it easier to compare shapes before cutting, test the intended position of each section and replace worn or missing components with matching forms. For ongoing upkeep of an existing model, this set supports selective repair work without replacing unrelated assemblies. Warning! Not suitable for children under 14 years.
Basic accessories
F-Parts Bag(Fx2), model spare parts set
319008213€10.49
F-Parts Bag(Fx2) is a dedicated spare parts set for compatible Tamiya model or RC applications, supplied as 2 identical black sprue frames with F marking. The layout keeps each molded component attached to the runner until removal, which helps separate small pieces and makes bench work easier to track. Across the 2 frames, the set provides a repeated group of numbered parts visible on the sprues, including curved arm-like pieces, a long narrow bar with circular holes at both ends, 3 small cylindrical bushings or spacers, 2 rectangular mounting blocks and a larger central bracket or holder piece on each frame. The molded numbering beside the parts supports identification during assembly or replacement, especially when a manual or existing build refers to individual part numbers. The duplicated frame format also helps when both sides of a mechanism use matching components or when worn pieces need like-for-like replacement. This set fits naturally into repair, restoration and ongoing maintenance work on a compatible Tamiya build. It also serves as a practical source of original-style replacement pieces when an existing assembly needs the F frame rather than a mixed assortment of generic hardware.
Basic accessories
F-Parts Suspension Brace, Truck model spare parts
300005472€22.49
F-Parts Suspension Brace is a replacement parts set for truck model maintenance, supplied as 1 molded sprue with multiple structural components on a single runner. The black injection-molded frame groups the parts in one place, making it easier to identify and separate the required pieces during a repair or rebuild session. The set covers suspension and brace functions, with shapes intended for mounting, linking and supporting sections within a compatible chassis assembly. Larger bracket-style pieces, curved arm forms and smaller fittings provide the kind of hard parts typically needed when an existing build needs fresh structural hardware rather than cosmetic changes. Because the parts stay attached to the runner before use, sorting and preparation remain clear at the workbench. This format also helps confirm that the full molded set is present before installation begins. F-Parts suits rebuild work, accident repair and routine replacement of worn chassis sections in truck model projects. On a bench beside the main assembly, the sprue gives a focused source for the specific suspension and brace elements needed to return a compatible model to running or display condition.
Basic accessories
FF Parts Side Panel Heavy Rack Model Parts Set
319007444€31.59
FF Parts Side Panel Heavy Rack is a model parts set for builders who need specific body and rack components for a compatible project. The sprue-mounted layout keeps the white moulded sections together before removal, making it easier to inspect the shapes, plan the build sequence and prepare each section for trimming, test fitting and finishing at the bench. The visible parts include 2 large curved rectangular side panels, 2 cylindrical ribbed sections and smaller connecting pieces formed as one unassembled set. That combination suits repair work on an existing model, replacement of worn or missing sections, or conversion work that calls for this exact panel and rack arrangement. The white surface is well suited to primer and paint, while the separate moulded sections allow clean preparation before final installation. Because the parts are supplied on sprues, builders can remove only the needed sections and keep the remaining pieces together until the next stage of assembly. On the workbench, this set supports careful dry fitting, surface preparation and colour finishing before the parts are added to the main build. It also works well as a spare parts source for restoring a compatible model with matching shaped panels and drum-like components.
Electronic
Flash Unit 56010/56020, model accessory cable
307255018€75.99
The Flash Unit for 56010 and 56020 is a model accessory cable designed for matching Tamiya applications that use this specific electrical part. Its layout combines a long black lead, a white multi-pin connector, a rectangular end section and additional red, white and black wires near the connection point, creating a compact harness for the intended internal link. The visible connector format helps distinguish this unit from generic wiring, while the bundled lead keeps the assembly together for handling and installation. Orange-insulated contact points mark the active connection area, and the attached warning tag indicates the high-voltage character of the component. That makes this part especially relevant when restoring the original electrical function of a compatible model or replacing a worn or missing harness with the correct designated unit. In workshop use, the Flash Unit suits repair, maintenance or parts replacement on 56010 and 56020 model builds that require this exact cable format. It fits naturally into a spares box for ongoing upkeep, and its defined connector-and-lead arrangement supports accurate matching when an existing electrical line needs to be exchanged. Warning! Not suitable for children under 14 years.