RC truck accessories
Small parts for big vehicles: discover high-quality tyres, rims, electronics and a wide range of accessories for your RC trucks: for optimum performance and customisation.
RC truck accessories
Small parts for big vehicles: discover high-quality tyres, rims, electronics and a wide range of accessories for your RC trucks: for optimum performance and customisation.
More
Basic accessories
1:14 Drivercabine for 56314, body shell
309335393€47.99
This 1:14 driver cab body shell is made for model 56314 and gives truck builders a dedicated replacement or build component for the upper exterior section. Formed as a single white cab piece, it presents the main outer surfaces in one unified shape, making it suitable for restoration work, parts replacement or a fresh custom finish. The shell arrives unpainted, which keeps the surface ready for sanding, priming and paint application according to the chosen livery. Moulded contours define the hood, side sections and roof panel, while the cutout areas for the windshield, side windows, door opening and roof opening establish the cab layout before further detailing begins. As a standalone exterior component, it is suited to projects where the original cab needs replacement or where a separate body section is required for a specific build stage. On the bench, the formed openings and panel structure help guide alignment with the matching model during test fitting and finishing. In a workshop setup focused on scale trucks, this cab shell can serve as the basis for repainting, repair work or a second body prepared in a different scheme. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Drivercabine Parts Bag, cab component
319335808€68.99
This 1:14 Drivercabine Parts Bag supplies a replacement cab shell for model truck work where the upper body section needs to be renewed, repaired or prepared for a fresh build stage. The white moulded cab brings the exterior form back into place with shaped front contours, side walls and a roof section that establishes the vehicle's visible structure. The shell is presented unpainted, which leaves the surface open for custom colour application and project-specific finishing. Moulded recesses and panel detailing give the part a defined appearance before further components are added. Multiple holes and fixing points are built into the cab section to support attachment during assembly, while the roof opening with its cross-shaped support shows the part's prepared construction. As a dedicated cab component, it suits workshop use where an existing model needs a fresh body section rather than a complete new kit. On the bench, the part fits naturally into repair, restoration and parts-replacement tasks for 1:14 scale truck modelling. It can also serve as a spare kept ready for ongoing maintenance projects, repaint work or the staged completion of a matching vehicle build.
Basic accessories
1:14 Ford Aeromax driver cab body, model part
300335157€50.99
This 1:14 Ford Aeromax driver cab body brings the distinctive long-hood truck silhouette into a model build with a molded shell that is ready for fitting, finishing and individual detailing. The white body part shows the full cab form clearly, from the front hood line to the roof and side sections, creating a strong visual base for a scale truck project. The shell is shaped with window apertures, roof cutouts and mounting holes already formed into the molding, so the main structure is defined before paint and trim work begin. Side panel lines add surface detail that helps the cab read convincingly once assembled on a matching chassis. The molded construction also leaves room for different finishing approaches, whether the goal is a clean road truck look, a working fleet style or a more custom presentation. As a dedicated body component, it suits restoration of an existing build as well as replacement during a rebuild. On the bench, the shell supports careful test fitting, painting and detail work around the cab openings and body lines. In a completed 1:14 truck model, the Ford Aeromax form gives the vehicle a recognisable road-going character that stands out in display settings and scale transport scenes. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Globe Liner driver cab, model body shell
309335165€54.99
This 1:14 Globe Liner driver cab body shell is a dedicated replacement body part for the 56304 truck platform. The cab section restores the distinctive upper structure of the Globe Liner and gives repair, refurbishment or continuation builds the correct visual base for a matching road truck model. As a separate body component, the shell is suited to projects where the original cab has been damaged, worn or set aside for a new finish. The 1:14 scale keeps the proportions aligned with the corresponding truck format, while the cab-focused design concentrates on the part that defines the model's road-going character. For workshop use, this kind of replacement part helps maintain continuity across long-running builds and supports careful upkeep of an established truck collection. On the bench, the body shell can be prepared for fitting and finishing as part of a restoration or spare-parts plan. It also suits modelers who keep key exterior components ready for future repairs, so an existing 56304 truck can return to a complete Globe Liner appearance with the correct cab section in place. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 King Hauler Drivercabine, body shell
300335129€53.99
The 1:14 King Hauler Drivercabine body shell brings the unmistakable outline of a classic truck cab into a scale build, with a boxy front section, shaped front fenders and a large rear box compartment formed in one exterior piece. The unpainted white shell gives custom projects a clean starting point for color, trim and surface detailing. Openings for the 2 front windshields, side windows, roof section and light or accessory fitment are already defined in the molding, which helps guide finishing and installation work. The surface carries molded door lines, panel breaks and rivet-style details that stand out once paint, lining or weathering is applied. The rear section adds utility box door contours and rounded upper edges, giving the body more visual depth than a plain smooth shell. As a replacement body for 56301, it suits rebuilds where the exterior needs a fresh cab structure rather than a full new truck. On the bench, the shell supports careful masking, painting and detail picking with a clear set of molded reference lines. In a completed 1:14 display or RC truck project, the defined cab shape and rear body contours give the model a purposeful road-going presence. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 M-B Actros Drivercabine, model cab shell
319335685€53.99
This 1:14 Drivercabine M-B Actros is a replacement cab shell for scale truck builds that need the correct outer front structure again. The white molded body captures the main cab form with a large windshield opening, side window apertures and defined exterior lines that give repainting or restoration work a clean starting point. The shell is shown as an unassembled body component rather than a complete truck, so the focus stays on fit, shape and finishing potential. A large roof opening with cross braces is molded into the upper section, adding another distinct structural area for builders working on a faithful rebuild. Small mounting holes and formed attachment points are already present in the shell, which helps when matching the part to an existing compatible assembly. The side wall cutouts and front lower section continue the cab geometry and keep the overall silhouette consistent with the stated Actros designation. On the bench, the cab shell suits repair projects, replacement of worn bodywork or a fresh paint scheme on a scale lorry. In a display build, the crisp molded surfaces provide a clear base for glazing, trim details and exterior colour work that brings the truck cab back into a complete road-going look.
Basic accessories
1:14 M-B Arocs 3363 Drivercabine, model part
319335774€45.99
This 1:14 Drivercabine M-B Arocs 3363 is a dedicated model part for the Tamiya truck platform referenced as 56352. It focuses on the cab section that defines the front profile of the M-B Arocs 3363, making it a useful choice when an existing build needs the correct upper body section restored or replaced. The designation links this part directly to the matching truck version, which helps keep repair and rebuild work aligned with the intended model rather than relying on generic body components. In workshop use, a cab-specific replacement can help return a display truck or running build to a more complete appearance after wear, damage or a body refresh. The 1:14 scale keeps it consistent with the corresponding truck format, and the Drivercabine naming makes its role within the overall vehicle structure clear. It fits naturally into spare-parts storage, planned rebuilds and detail-focused maintenance sessions where the cab area is the section being renewed. For collectors and truck model builders working on the 56352 platform, this part supports accurate continuation of the original Arocs configuration.
Basic accessories
1:14 MAN TGX XLX, driver cab, for 56325
319335565€44.99
This 1:14 driver cab is made for the MAN TGX XLX 56325 truck model and supplies the key upper body section in a single dedicated part. The included contents are 1 cab, giving the build the correct front and roof structure for repair, replacement or restoration work on the specified model. Used on the designated 56325 platform, the cab restores the truck's recognizable MAN TGX XLX silhouette and brings the bodywork back into line after damage, wear or incomplete storage. The scale format keeps the part aligned with a 1:14 truck build, which matters when matching exterior proportions across the chassis and body sections. Because this is a model-specific cab rather than a universal body component, the fit and visual result stay tied to the named reference instead of relying on adaptation. On the workbench, this cab suits rebuilds of a previously run truck, completion of an unfinished project, or replacement during a visual overhaul. It also serves display-focused maintenance where the upper body shape defines the finished look of the assembled MAN TGX XLX model. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Mercedes-Benz Actros 3363 Sticker Set
319495885€26.99
This sticker set is made for the 1:14 Mercedes-Benz Actros 3363 6x4 Gigaspace RC truck and brings the finishing layer that turns painted bodywork into a recognisable scale replica. Long black stripe decals, grey trim sections and a large panel marking give the cab and body sections the printed accents seen on the full-size vehicle, creating a cleaner and more complete final appearance. The sheet also reaches into smaller areas that shape the overall realism of the build. Dashboard graphics, instrument clusters, switch panels, vent details and console markings add printed definition inside the cab, where plain moulded surfaces gain a more technical look. Multiple licence plate decals marked S-MB3363 are included alongside country identifiers and alphanumeric markings, allowing the model to carry road-style details across front and rear positions. Brand and model graphics such as Actros, Mercedes-Benz, Truck of the Year and BLUETEC markings support accurate badging across the exterior. Reflective warning panels, red triangular reflectors, ON and OFF labels, and caution markings for motor heat and rotating parts extend the sheet to functional-looking zones around the truck. Applied during the finishing stage, these printed elements help tie together cab, trim and mechanical areas so the completed model reads with more scale-specific character on the shelf or on the road. Warning! Not suitable for children under 14 years.
Rims
1:14 Metal Plated Rear Wheels, option wheel set
300056518€13.49
These 1:14 Metal Plated Rear Wheels bring the restrained, natural-metal look of full-size logistics trucks to an R/C tractor truck build. The matte metal-plated finish changes the visual tone compared with kit-standard gloss wheels, giving the rear axle area a more understated commercial-truck character when the model is parked, displayed or running. The set is intended as an option wheel set for 1:14 scale R/C tractor trucks and is designed around tires with 22 mm width. That measurement matters at the planning stage, because it keeps the wheel choice tied to a specific tire format rather than a general truck theme. The flat fin design and the detailed wheel face help capture the look of steel or aluminum wheels often seen on working trucks in logistics networks. As a replacement set, these wheels focus on appearance rather than altering the truck's basic mechanical concept. They suit refresh projects, repair work and visual reconfiguration of an existing tractor truck, especially when a build calls for a less reflective finish than the standard plated parts. On a highway tractor, fleet-style hauler or workshop rebuild, the matte surface and commercial wheel styling can shift the whole stance of the model with a single component change. Warning! Not suitable for children under 14 years.
Rims
1:14 OR RaceTruck Whl FR, wheel set, white ABS
300054964€11.29
This 1:14 OR RaceTruck Whl FR wheel set brings a clean white finish and dedicated racing truck styling to compatible RC builds. The set contains 4 wheels in a 2 front plus 2 rear layout, with molded ABS construction and rim faces that show bolt detailing and vent openings for a purposeful competition look. The white surface works in 2 ways: it can stay unpainted for a bright, crisp appearance, or it can be painted to match a custom body scheme and livery. Front and rear wheels share the same 25 mm width and 42 mm diameter, which keeps the rim format consistent across the truck. The deep barrel shape and central hub opening are designed for use on on road racing truck applications, and the set is intended for pairing with On Road Racing Truck Tires, Item 51589. Compatibility is stated for TT-01, TT-01 Type-E and TT-02 chassis models. On a bench build, the set gives a straightforward route to replacing darker or plated rims with a white alternative that changes the visual character of the truck. In a race-inspired display or a finished running model, the crisp color and molded face details stand out clearly against bold body graphics and sponsor-style paintwork.
Tyres
1:14 Race-Truck Wheel-Set, model wheels, 26 mm
300099646€31.99
This 1:14 Race-Truck Wheel-Set brings the focused look of a competition truck build into a dedicated replacement and upgrade set. The pack contains 2 front wheels and 2 rear wheels, creating a complete 4-wheel layout for model truck projects that need matching fitment across both axles. With a 26 mm wheel size, the set adds a clear dimensional reference for builders planning a consistent stance and proportion on a 1:14 race-truck chassis. As a wheel set rather than a full vehicle kit, the emphasis stays on precise fit and coordinated appearance. The front and rear allocation helps maintain the intended layout of a race-truck build, while the 4-piece configuration suits restoration work, parts replacement and custom workshop planning. The 1:14 scale makes the set relevant for truck modelling projects where visual accuracy and component compatibility matter more than generic spare parts. On the bench, the set fits naturally into rebuilds that call for a fresh wheel group after wear, or into custom projects that need a dedicated race-truck look. It also works well for keeping a matching spare set ready for future maintenance on 1:14 truck models. Warning! Not suitable for children under 14 years.
Rims
1:14 RaceTruck Whl FR, wheel set, black
300054741€11.19
The 1:14 RaceTruck Whl FR wheel set brings black racing truck rims to compatible Tamiya semi-truck builds, with 2 front wheels and 2 rear wheels shaped for the dedicated RaceTruck format. The black molding changes the visual character of the truck immediately, giving the wheel area a darker, more competition-focused finish when the model is on the track or on display. Each rim shows circular ventilation-style cutouts around the outer face and a multi-bolt hub pattern at the center, details that echo full-size racing truck wheel design. The deeper barrel profile adds visual depth once tires are mounted, and the front and rear wheel pairing keeps the setup aligned with the intended truck layout. This set is described as a black variant of the stock wheels used on the Team Hahn Racing MAN TGS semi-truck kit, making it a direct styling alternative within the same format. Compatibility is stated for TT-01E and TT-02 chassis machines. On-road racing truck tires Item 51589 are used to complete the running setup. Mounted on a race truck body, the black rims sharpen the contrast around the wheel arches and suit repaint, restoration, or replacement work on an existing chassis. The set also fits neatly into parts planning for a fresh semi-truck build where wheel color and scale-style detailing matter as much as chassis compatibility.
Basic accessories
1:14 Scania Drivercabine, model body for 56318
309335474€47.99
This 1:14 Scania drivercabine body is a dedicated replacement cab for the 56318 truck model, bringing the correct upper structure back to a build that needs a fresh shell. The focused format makes it useful for restoration benches, repaint work and repairs where the original cab has been damaged or worn through regular handling. As a separate body component, the drivercabine can be kept in reserve for maintenance cycles or used as the starting point for a new exterior finish on an existing 1:14 truck platform. The Scania form gives the model its recognizable road-going presence, while the spare-body role keeps the work centered on the visible cab section rather than a full rebuild. For collectors and builders maintaining a fleet, a dedicated replacement shell helps preserve the intended appearance of the 56318 configuration. On the workbench, this cab body fits naturally into repair, repaint and refurbishment tasks where the upper truck section needs to be renewed. It also suits long-term parts storage for larger scale truck models, ready for the moment a running or display build calls for a correct Scania cab replacement. Warning! Not suitable for children under 14 years.
Rims
1:14 Trailer Wheels 30mm BB, RC truck accessory
300056520€10.99
These 1:14 Trailer Wheels 30mm BB are option accessories for R/C tractor trucks and semi-trailers, created to shift the look away from the kit-standard gloss finish and toward a flatter natural-metal wheel style. The matte metal-plated surface gives the wheel area a more restrained, work-truck character that suits steel or aluminum wheel references on full-size tractor trailers. The set contains 2 wheels and is sized at 30 mm BB for use on compatible 1:14 scale truck builds. Rather than changing the vehicle layout, this accessory focuses on visual customization through a direct wheel swap. The deep wheel form and circular hole pattern shown in the parts design add mechanical detail around the hub area, while the flatter chrome effect keeps the finish closer to a plain metal appearance than a bright polished look. As an option part, it supports builders who want a different finish treatment on a truck or trailer already in service. Compatibility is stated for the rearmost axle on a 3-axle Tamiya Tractor Trailer and for the front wheels on Mercedes-Benz Actros #56335. That makes the set useful when matching wheel style across selected axle positions or when refining one section of a larger 1:14 road truck build with a more understated metal-plated look. Warning! Not suitable for children under 14 years.
Rims
1:14 Trailer Wheels, accessory set, 30mm hex
300056519€10.49
This 1:14 trailer wheel accessory set gives R/C tractor trucks and semi-trailers a different visual character through a matte metal-plated finish and a flat chromed look. The 30 mm hex mounting format is tailored to trailer applications, and the plain natural-metal style mirrors the steel or aluminum wheels often seen on full-size tractor truck combinations. The set contains 2 wheel units and matching hardware parts shown for the wheel assembly. Around the center hub, the wheel faces use bolt-detail styling and evenly spaced circular openings that reinforce the commercial vehicle look at 1:14 scale. Used in place of kit-standard gloss finish metal-plated wheels, these parts shift the appearance toward a more understated, work-truck presentation. The fitment note is specific: use is limited to 3-axle trailers equipped with single axle 30 mm wheels. Mounted on a compatible semi-trailer, the wheels suit display builds that aim for a plain fleet-style finish as well as running models that need a coordinated trailer update. The flatter surface treatment changes the visual balance of the undercarriage and helps a tractor-trailer combination read closer to a full-size road setup. Warning! Not suitable for children under 14 years.
Rims
1:14 V-Parts Truck Twin-Wheels, model accessory
300445258€14.49
The 1:14 V-Parts Truck Twin-Wheels add a distinct heavy-truck look to compatible model builds with a chrome-coloured finish, deep-dish rim form and a paired wheel layout in 1 assembled wheel unit. The reflective surface and drilled wheel-face pattern give the running gear a more scale-focused appearance when the truck is viewed from the side or rear. The outer face shows evenly spaced circular openings and a raised centre section, while the inner side uses a bowl-shaped rim profile with a central hub opening for mounting. A connecting centre ring joins the 2 wheel halves into the twin-wheel format, creating the visual width associated with truck rear axles in 1:14 scale. As a dedicated accessory part, this wheel unit suits repair work, replacement of worn components or detail-focused custom projects where matching axle hardware matters. Mounted on a compatible 1:14 truck model, the twin-wheel design helps complete the look of a working road tractor, display build or workshop conversion. It also fits neatly into parts-led projects where a single wheel assembly is needed to restore symmetry or refresh the finish on an existing chassis. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Warning-Sticker Set Tractor/Trailer, decal set
300056534€20.99
The 1:14 Warning-Sticker Set Tractor/Trailer brings full-size freight detail to scale truck builds with a broad sheet of markings for cab and trailer surfaces. European truck-style graphics, service labels and route identifiers give a model the visual language of commercial transport, whether the goal is a clean road hauler, a tanker-style layout or a more heavily marked working rig. Alongside warning panels and speed limit signs, the sheet provides national identification marks plus separate letters and numbers for custom numbering and vehicle-specific combinations. This opens up more than one fixed look: trailer sides, rear panels, fuel areas and service points can be arranged with different label groupings to match the chosen theme. The mix of operational notices and identification graphics helps smaller scale details read clearly once applied, especially on larger 1:14 truck bodies where open panel space benefits from realistic markings. The set is usable with any 1:14 scale tractor truck body, making it a practical choice for new assemblies and for updating an existing cab or trailer with fresh graphics. On the bench, the sheet supports careful finishing work; on a completed display or running model, the added signs, codes and warnings give the truck a more convincing long-haul presence. Warning! Not suitable for children under 14 years.
Electronic
2-Way Connector, Y-Cable for MF-Units
307255032€7.59
This 2-Way Connector is a Y-cable for MF-Units, built to create a clean split from one lead into 2 connection paths within model electronics. The red and black wire pairs make polarity easy to follow at a glance, which helps when arranging power or signal leads in compact RC installations. The cable uses flexible insulated wiring that can be guided around nearby components instead of demanding a straight run. That matters in enclosed hulls, chassis compartments, or other tight model spaces where cable routing affects both fit and access. The simple branch format also suits replacement work, maintenance, or custom wiring changes when an MF-Unit setup needs an additional linked connection. The visible wire marking shows 80°C AWM on the insulation. As a model electronics accessory, this connector fits naturally into workshop tasks such as repairing an existing wiring layout, extending a compatible branch, or preparing a neater internal cable arrangement before final assembly. It is a focused choice for RC builders working with MF-Units and related electrical installations. Warning! Not suitable for children under 14 years.
Basic accessories
3-Axle Frame L/R, model spare part for trucks
304005128€48.99
The 3-Axle Frame L/R is a dedicated spare part set for Scania R620 and MAN TGX model trucks, supplying 2 matching black metal side rails for the chassis structure. Each rail has a long, straight profile with bent side flanges and a series of round mounting holes, giving the frame section the correct base for replacement or repair work. The left and right rails are shaped as a mirrored pair, which suits their role as side members in a truck chassis layout. The hole pattern runs along the length of each piece in several sizes, allowing attachment points for adjoining components where the original frame section needs to be restored. The metal construction adds the rigid, hardware-like character expected from a structural chassis part, while the narrow channel form helps the rails sit as defined frame elements rather than flat strips. The image data shows a clean black finish that matches the technical look of scale truck running gear. This set fits projects centered on Scania R620 or MAN TGX model truck maintenance, rebuilds, or parts replacement. It suits workshop tasks where a worn, missing, or damaged frame section needs the correct left and right rail format to bring the chassis back into working order. Warning! Not suitable for children under 14 years.
Electronic
3mm MFC LED-Set, model lighting accessory
300056521€18.79
This 3 mm MFC LED-Set adds light amber illumination to compatible model truck builds, giving lamp positions a yellowish-white tone modeled on halogen lighting. The clear LED format keeps the visual focus on the installed light effect, making it suited to scale applications where the lamp housing itself should remain unobtrusive. Developed for the Tractor Truck Option Parts Series, the set is part of the latest additions to the Tamiya LED light range. The wired layout shown in the set supports integration with a multi-function lighting setup rather than a standalone loose diode fitment. The included connection format is intended for use with the Pick-Up Truck Multi-Function Control Unit MFC-02 53957 as well as the Tractor Truck Multi-Function Control Units MFC-01 and MFC-03 56511 and 56523. This makes the set a focused choice for builders matching lighting tone and control compatibility within the MFC system. In use, the 3 mm size suits model lamp positions that call for a compact light source, whether updating a truck front end, refining a scale lighting layout, or replacing an existing compatible LED. The amber output works especially well where a warmer road-going lamp appearance is preferred over the cooler bluish-white look associated with HID-style lighting. Warning! Not suitable for children under 14 years.
Basic accessories
A-Parts A1-A33 Tools, model parts for 56014
300005837€9.79
This spare parts frame is made for the M4 Sherman 56014 kit and provides the A-Parts A1 to A33 set in 1 molded runner with 40 pieces. The layout follows the named A-section structure from the original kit, which helps keep a rebuild, repair or parts replacement consistent with the intended assembly sequence. The connected sprue format keeps the individual components organized until removal, which supports careful trimming, checking and placement at the workbench. Visible elements on the frame include exterior fittings and tool-shaped components that suit military vehicle detailing, along with larger structural sections and smaller attachment points. Because the set is specified as A-Parts for 56014, it serves as a direct match when original pieces are missing, damaged or needed again during a restoration project. On the bench, the frame suits methodical sorting before assembly and gives model builders a clear reference for locating each numbered section. It also fits repair work on an already started M4 Sherman build, where a single replacement runner can restore continuity without replacing the full kit. Warning! Not suitable for children under 14 years.
Basic accessories
AA-Parts Bag 56360, model parts set, 1:24
319004976€12.49
AA-Parts Bag 56360 provides a focused source of 1:24 replacement components for model work that needs matching molded sections rather than improvised substitutes. The silver gray sprue presents the parts in a clear rectangular layout, making it easy to identify each section before cutting and fitting them into place. Visible on the runner are 2 large curved body shell panels, several long narrow side or trim pieces, 2 seat-like parts, 4 round disc elements and a range of smaller rectangular detail sections. This mix supports repair and restoration jobs across exterior and interior areas while keeping the molded finish consistent from part to part. Because the components remain attached to the frame before use, sorting and checking the needed sections can happen before any piece is removed. The molded 1:24 marking on the sprue gives a direct scale reference for matching work. On the bench, this set fits projects where an original section is missing, damaged or incomplete and a like-for-like molded replacement is needed. It also suits careful stock replenishment for ongoing model maintenance, where having the right shell, trim or detail section ready can keep a build moving without compromise.
Rims
AB Parts Widewheel Front, model wheel parts set
319335674€18.49
AB Parts Widewheel Front is a model wheel parts set for the MB Actros 56335, supplied as 2 chrome-plated components on a sprue with a separate ring detail. The deep-dish rim form, oval ventilation openings and molded lug pattern give the assembled truck a distinctly heavy-duty wheel face with a bright plated finish. The parts are shown unassembled, which keeps cleanup and fitting aligned with the build process of the base model. The additional circular insert with evenly spaced holes introduces another visible layer around the hub area, adding definition that stands out under display lighting. Because this set is specified for the front widewheel position on the MB Actros 56335, it supports an accurate visual match where the truck's steering axle needs the correct rim style rather than a generic commercial wheel. The plated surface also suits restoration of an older build where original front wheel parts are no longer in clean condition. On the bench, these parts fit naturally into a rebuild, parts replacement or detail-focused refresh of the truck model. Once installed, the reflective finish and crisp rim contours give the front end a more complete road-going look in parked display scenes, workshop dioramas or cab-focused shelf presentation. Warning! Not suitable for children under 14 years.
Basic accessories
Aeromax Grille P-Parts, model accessory, chrome
300115234€28.49
This Aeromax grille P-Parts set is a model accessory made for 56309 and focuses on the bright front-end details that shape the finished truck's character. The chrome-plated frame holds multiple molded pieces, including large curved grille elements and smaller matching trim components, so the reflective finish stays visually consistent across the fitted sections. The parts arrive attached to a single sprue, which helps keep the individual components organised during the build or during replacement work on an existing model. Patterned panels, narrow bars and smaller mounting-style pieces add further surface definition where the Aeromax design calls for crisp metallic accents. The molded contours and plated finish bring out edges, openings and decorative shapes that can otherwise look flatter in uncoated form. This set suits repair work on 56309, completion of an unfinished build, or the replacement of worn grille sections after handling and display. On the bench, the grouped layout makes it easier to identify each section before cutting and fitting. Once installed, the chrome details give the front area of the Aeromax model a sharper, more finished presence that matches the style of a highway truck build. Warning! Not suitable for children under 14 years.
Basic accessories
Air Intake M-B Arocs, model parts set, black
319225180€19.99
This air intake parts set for the M-B Arocs supports repair, replacement and detail work on an existing model build. The black injection-moulded runner carries multiple shaped components in one matched frame, giving rebuild projects a consistent finish across visible exterior sections. The sprue layout shows vented grille-style panels, curved housing pieces, bracket and mount elements, circular collar parts and 2 larger tubular intake sections with ribbed shaping. That mix helps cover both prominent body details and the smaller connection points that support a tidy installation. Keeping the parts attached to the runner until use also helps with identification during workshop preparation and staged assembly. The moulded black finish suits applications where matching colour and surface appearance matter during restoration work. On the bench, the set fits naturally into maintenance tasks such as replacing damaged intake details, refreshing a used truck body or completing a project that is missing original components. It also serves as a practical reserve for long-term model upkeep, where having the correct shaped parts ready can keep a build visually complete and mechanically tidy. Warning! Not suitable for children under 14 years.
Electronic
Back Lamp J18, model accessory, LED cable set
307175099€10.99
The MFC LED Back Lamp J18 is a model accessory built around a pre-assembled rear light lead, combining an LED back lamp connection with bundled wiring for a neat electronics fit. Twisted grey and white wires run into a compact transparent connector, creating a clear, organised layout that suits detailed model installations where space is limited and cable routing matters. The lead is gathered at the centre with black tape, which helps keep the wire run together while the lamp connection is positioned in the model. This kind of ready-made harness is useful when an existing lighting setup needs a matching replacement rather than loose wire and connector work from scratch. The transparent plug end gives a direct visual reference during connection, and the slim wire format suits enclosed body sections, chassis areas or scale vehicle interiors that carry lighting functions. On a workbench, the J18 can serve as a replacement part during maintenance or as a dedicated rear light lead in a compatible build. In an installed model, it supports the visual finish of a vehicle with functioning back lamp electronics while keeping the wiring run compact and orderly. Warning! Not suitable for children under 14 years.
Basic accessories
Battery Mount Scania 56371, model spare part
319115568€29.99
This battery mount is an SS Parts replacement for Scania 56371 and serves one clear task within the model: holding the battery in its intended position. As a dedicated spare part, it supports accurate maintenance work when the original mount is missing, worn or damaged. The part is identified in the source data as Battery Mount Scania 56371, which makes it a direct match for servicing that specific model reference rather than a general-purpose accessory. Using the correct replacement part helps keep repair work focused on the affected area and avoids changing larger assemblies when only one mounting component needs attention. That makes it useful for routine upkeep, restoration projects and workshop stock where exact model-specific parts matter. In practical use, this spare part fits naturally into repair sessions, rebuilds after wear, or planned maintenance on Scania 56371. It also suits collectors and builders who keep selected replacement components on hand for future servicing of the same model.
Basic accessories
BB Parts Clear Side skirt S770, model parts set
319007361€8.19
BB Parts Clear Side skirt S770 is a model parts set built around clear molded body-detail components for a matching S770 assembly. The translucent sprue format keeps the parts connected and visible at a glance, so the layout can be checked before any section is removed for fitting. The frame carries numbered groups from 1 to 5, including 4 smaller rectangular inserts on the left and 4 longer curved side elements on the right. This arrangement helps separate the different shapes by function during the build and supports more accurate placement when the body details are added. The molded runner structure keeps each section organized until use, which is especially useful when several similar pieces need to be handled in sequence. The clear material also suits builds where body trim, side detailing or transparent styling parts need a defined finish rather than an opaque look. On the bench, the set works as a focused source for replacement parts, repair work or a fresh body-detail stage within an ongoing model project. The compact sprue layout also makes it practical to inspect, trim and prepare each section in order before the final body assembly continues. Warning! Not suitable for children under 14 years.
Basic accessories
Bevel Gear Shaft, spare part for model 56313
309804180€6.69
This spare part set provides 2 bevel gear shafts for model 56313 and focuses on a precise mechanical role inside a driven assembly. Each piece combines a silver conical gear head with multiple teeth, a circular flange and a short dark shaft with a square drive end, forming a compact component for angled gear engagement. The bevel gear shape indicates use where rotational force changes direction through meshing gear faces rather than a straight spur gear path. The flange supports defined positioning of the part within the surrounding mechanism, while the square shaft end points to a positive drive connection with the matching receiving component. The metal construction shown in the part image suits a technical replacement task where tooth form and shaft geometry matter for correct operation. As a 2-piece set, the pack supplies a matched pair for maintenance or repair on the specified 56313 model. This kind of replacement part fits workshop sessions centered on restoring a drivetrain, gearbox or axle section after wear or damage. It also suits planned servicing when a model is being inspected, rebuilt or returned to running condition with the correct dedicated hardware for the named application. Warning! Not suitable for children under 14 years.
Basic accessories
C Parts Chassis Parts, RC spare parts set
319008208€11.79
C Parts Chassis Parts brings together a focused selection of molded chassis components for Tamiya model vehicle maintenance and rebuild work. The set is supplied as black injection-molded parts on a sprue, a format that keeps small sections connected and easy to sort before they are clipped free for installation. The visible component mix covers several mechanical shapes used around a chassis assembly, including bracket forms, rounded housings, linkage-style pieces and mounting sections. That variety matters when a repair calls for matching geometry rather than a generic substitute, especially where moving assemblies and fixed mounting points meet. The black molded finish gives the set a consistent look alongside existing chassis sections. Because the parts remain grouped on the runner, each piece can be checked against the build step or repair task before removal, which helps keep workshop handling tidy. This spare parts set suits bench repairs, partial rebuilds and the replacement of worn or damaged chassis sections after regular RC use. It also works as a practical stock piece for hobby setups that keep key maintenance parts ready between running sessions and workshop servicing. Warning! Not suitable for children under 14 years.
Basic accessories
C-Parts Crossmember 56323, model spare part
309005933€13.49
C-Parts Crossmember 56323 is a model spare part shaped for structural use within a vehicle assembly. The black molded piece shows a defined crossmember form with multiple circular mounting holes, recessed screw seats and raised posts that help place matching hardware and adjoining sections in the intended positions. The part is presented in front and rear view, making the geometry easy to identify against an existing build before installation. Triangular side bracing and the central bridge layout indicate a load-bearing role within the assembly, where stable connection points matter for chassis-related fit. The visible numbering and molded marking on the sprue section support part recognition when comparing replacement components during workshop sorting or rebuild planning. As a dedicated spare part, it suits repair work, restoration of an older model, or replacement of a worn or missing frame section. Used during maintenance or reassembly, the crossmember helps return a model vehicle to its intended structure by restoring key screw locations and connection geometry. It also serves as a practical reference piece when checking orientation, hole spacing and mounting position against the surrounding assembly. Warning! Not suitable for children under 14 years.
Basic accessories
C-Parts Steering Mounting Set, model spare parts
300005564€27.49
This C-Parts steering and mounting set brings together molded replacement pieces for 2 axle truck assemblies in one clearly organized sprue. The black and metallic silver components are arranged on the runner for straightforward visual reference, making it easier to identify the needed section before removal and installation. The set is described as C-Parts for steering and mounting points, with multiple numbered references visible on the sprue from 4 to 19. Larger frame-like sections sit alongside smaller brackets, linkage-style parts, bushings, spacers, clamps and ring washers, giving the set a technical layout that supports instruction matching and targeted replacement work. The molded runner also carries the C identifier and TAMIYA marking, which helps confirm the correct parts group during workshop sorting. As a spare-parts supply in the Models & Accessories range, it fits practical bench use where worn, missing or damaged molded sections need to be replaced with matching components. On the workbench, the organized sprue format helps keep small pieces together until the required section is selected for the repair. For ongoing truck maintenance, this set supports clean parts identification, orderly storage and accurate preparation before assembly steps begin.
Basic accessories
Cabin Interior L Parts, model accessory for Actros
319115369€20.49
This cabin interior L parts set is a model accessory for the M-B Actros 56335 and focuses on the details that define the inside of the cab. The white molded sprue carries a dashboard, 2 front seats, a steering wheel, long trim elements and smaller control parts that support a more complete interior during assembly. The runner layout keeps each component attached and easy to identify before cutting and fitting. A rear interior panel and narrow side pieces with round mounting holes add further structure to the cabin area, while the smaller lever-like parts extend the control detail beyond the main dashboard and seating. Because the set concentrates on the cab rather than the body shell, it suits builds where internal features remain visible through the windows or open access points. On the workbench, the parts support a focused detailing stage that can change how the finished truck cab reads at close range. Painted and installed to match the chosen build, the interior pieces help create a more convincing driving environment for display, photography or a restoration of the original M-B Actros 56335 configuration. Warning! Not suitable for children under 14 years.
Basic accessories
Cabin Sidepanel S770, model spare part set
319115548€16.79
This spare part set centers on the cabin bodywork for the S770 and provides shaped replacement sections for model repair, restoration or continued assembly. Large side walls with window openings and curved contours define the cabin form, while separate narrow strips and mirrored sections support a clean fit across the body shell. The white molded pieces are supplied on sprues, so each section stays clearly separated until trimming begins. Visible numbering on the frame, including positions such as 2, 3, 4 and 6, helps identify the correct parts before fitting. Wheel-arch cutouts and long side elements point to use on a truck-style or van-style cabin structure, where panel shape matters for matching the original body lines. The unpainted finish also leaves room for sanding, priming and colour matching when replacing worn or damaged exterior sections. On the bench, this set suits careful rebuilds where a cabin side has been marked, broken or lost. It also supports ongoing projects that need fresh body panels before final paint and detail work, keeping the exterior layout consistent across the assembled model. Warning! Not suitable for children under 14 years.
Electronic
Cable Bag for 56313, model accessory, MFC-01/03
309400042€134.99
The Cable Bag for 56313 is a model accessory created for MFC-01/03 LED and cable organization, giving wiring inside the model a more controlled layout. Used with the 56511 application named in the data, it provides a dedicated place to gather leads that would otherwise sit loose around the electronics area. This accessory is centered on cable handling rather than decoration. Grouping LED leads and related wiring in one bag can help keep the installation area clearer when multiple connections run through the chassis or body section. That makes it easier to distinguish routed cables from neighboring components during fitting or later checks. The bag format also suits models that use the MFC-01/03 system, where lighting cables and control leads benefit from being kept together instead of spreading across the interior. During workshop setup, refitting, or electronics maintenance, the cable bag supports a neater internal arrangement and a more orderly view of the installed wiring. It fits naturally into model builds that use lighting functions and cable-based control layouts, especially where several leads need to stay grouped in a defined position. Warning! Not suitable for children under 14 years.
Basic accessories
CC Parts Clear Taillights S770, model accessory
319007362€7.39
CC Parts Clear Taillights S770 focuses on one of the small details that gives a scale build a more finished rear view. The set provides molded taillight components for the S770, making it useful for replacement work, restoration projects or a fresh body finish where the rear light area needs clean, defined parts. The parts arrive on a red sprue frame, which keeps each section organized before removal and helps identify the molded shapes during assembly. The visible material marking indicates PSPS, giving a concrete reference for the composition of the frame and parts. This kind of accessory suits builders who refine body details step by step rather than leaving rear sections plain or incomplete. It can support a tidier result on a rebuild, a repair, or a body shell that is being finished with renewed exterior trim. On the bench, the set fits naturally into careful model preparation, whether replacing missing light pieces or completing a body with sharper rear detailing. In a display setting, the taillight area gains clearer visual definition that helps the finished model read more convincingly from the back. Warning! Not suitable for children under 14 years.
Basic accessories
CC-Parts Bag CC, model parts set, chrome finish
319004946€14.49
CC-Parts Bag CC brings a single chrome-colored sprue into model work where matching plated details matter. The rectangular frame holds multiple small mirrored components together in one set, giving builders a clear starting point for replacing missing sections or completing a specified assembly stage with the correct finish. The molded parts are presented as CC-Parts Bag CC x1 and correspond to reference 56360 in the supplied data. The chrome-colored surface creates a reflective metallic appearance that suits trim and accent areas where a plain molded finish would look different from the surrounding section. Because the pieces remain attached to the sprue before removal, each component can be checked in place and separated only when the build reaches that step. This format also helps keep small parts grouped during bench work and parts sorting. The set fits naturally into repair tasks, restoration of an earlier build, or a fresh assembly that calls for this exact frame. On the work surface, the mirrored finish stands out clearly against tools and cutting mats, helping visual checks before fitting and placement. This is a focused replacement and supply component for model building rather than a complete kit.
Basic accessories
Chassis LR Set, model spare part, shrink packed
314305672€63.99
The Chassis LR Set is a model spare part shaped as a long, slim black metal rail with a straight profile and a series of pre-drilled holes. That layout supports accurate positioning inside a compatible chassis assembly, where a replacement strip needs defined fixing points and a rigid linear form. Its narrow rectangular shape suits structural use rather than decoration, making it relevant for repair, maintenance, or restoring an existing build to working order. The dark metallic finish and perforated construction indicate a part designed to be fastened into place with matching hardware from the compatible model system. Because the holes are distributed along the length of the rail, the strip can align with established mounting positions in the chassis area instead of relying on improvised drilling or reshaping. Shrink-packed supply keeps the part contained in storage among workshop spares until it is needed for a rebuild or replacement job. This kind of chassis component fits naturally into bench work where worn, bent, or missing structural parts need to be exchanged with a matching replacement. It also suits planned maintenance on a model that is being stripped down, checked, and reassembled with fresh chassis hardware.
Basic accessories
Chrome Parts Set, model accessory sprue, black
310115874€19.49
This chrome-plated parts sprue adds bright exterior detailing to a scale truck build, with a reflective finish that gives the front section and side accents a more defined, realistic look once the pieces are fitted in place. The runner layout keeps the plated components grouped together, making it easier to identify each section before removal and assembly. The visible set centers on a large front grille with a diagonal bar and emblem area, supported by 2 large headlight assemblies, smaller lamp units and further trim pieces. Mirror or marker-style parts and side grille or trim panels broaden the plated treatment across more than one area of the body, so the finish does not stop at the nose. Because the parts are supplied unassembled on a single rectangular sprue, the layout also helps with part checking during a careful hobby build. The black base specification in the source data distinguishes this version from other finish variants. On the bench, the plated runner suits builders replacing worn trim, completing a detailed truck body or refining the visual contrast of a custom project. Once installed, the bright accents work especially well on display builds where grille depth, lamp framing and small exterior highlights are meant to stand out at close range. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Glass Panes S Parts for Model Assembly
319115552€13.79
S Parts Clear glass panes 770S adds a dedicated transparent pane set to compatible model assembly work, with molded glazing sections supplied together on a sprue for organized handling at the bench. The set is shown as 6 numbered parts, which helps separate each insert by position before removal and fitting into the body structure. The visible pane shapes include 2 matching curved sections, 1 rounded rectangular insert, 2 angled rectangular panels with cutouts, and 1 taller rectangular panel. This mix supports model areas that need different window outlines rather than a single repeated shape. The transparent molding keeps the focus on visible glazing detail once the compatible build is assembled. Numbering on the sprue also helps track each section during trimming, test fitting, and placement, especially when several openings sit close together on the same body shell. On the workbench, this kind of parts set suits repair of a used build as well as completion of a fresh assembly where the correct clear sections are needed for the body. The sprue format keeps the panes grouped until use, so each section stays easier to sort, compare, and fit during the build process. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Headlight Parts Set for Model Vehicle Bodies
319007360€10.29
This clear parts set adds transparent light and glazing details to a model vehicle body, bringing sharper definition to the finished shell through molded lenses, window-style panels and small exterior inserts. The AA sprue holds multiple numbered components in clear material, while the matching sheet shows numbered sections and placement guidance that help keep each stage of body finishing easy to follow. Small lens-shaped pieces can be fitted where headlight or indicator details are needed, and the larger curved panels suit window or glazing areas that benefit from a separate transparent part instead of painted imitation. The runner includes markings such as AA, 1, 2, 3, 4, 7, 8, 9, 11 and 12, making it easier to match parts to the guide during assembly. The printed sheet also shows orientation examples for a larger rectangular panel section, supporting accurate placement when left and right positions or front and back alignment matter. Together, the clear sprue and guide sheet support a more precise exterior finish on compatible model bodies. This set suits body detailing sessions where light covers, windows and trim elements are added after painting. It also works well when replacing worn clear pieces or refining a shell with more distinct transparent accents and cleaner separation between painted and glazed areas. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Light Bar S770, model spare part insert
319007363€9.29
Clear Light Bar S770 is an EE Parts replacement frame with transparent molded sections for model maintenance, restoration, or parts replacement. The attached clear pieces sit on a single sprue, giving a tidy overview of each shape before trimming and fitting begins at the workbench. The frame image shows several small rounded transparent parts and larger elongated inserts, while the molded marking E2 and the material marking >PS appear directly on the sprue. A separate technical diagram identifies the EE part layout with grouped positions marked 1 and 2, adding a concrete reference for matching the correct section during repair or rebuild work. This kind of spare part suits projects where worn, missing, or damaged clear sections need to be replaced with parts that follow the original molded form. Used during a careful rebuild, the transparent inserts can restore defined light details and clean surface openings on a compatible model. The single-frame format also helps keep all sections together until the required piece is selected for trimming, test fitting, and final installation. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Parts Light Bar Model Accessory Sprue
319000848€12.99
This clear parts sprue is made for Light Bar 56348 model work and provides a set of transparent molded components for replacement, repair or completion tasks. The frame layout keeps each piece attached at defined gate points, so the parts stay organized until trimming and fitting begins at the workbench. The sprue carries several distinct clear shapes, including circular lens-style pieces, narrow rectangular inserts and rounded rectangular panels. That mix supports detail work on a matching model assembly where light covers or other transparent sections need to be restored with parts that match the original molded form. The transparent finish helps preserve the crisp appearance expected in scale builds, especially where visible lighting or panel details sit on the exterior. As a dedicated accessory part set, it suits careful maintenance of an existing build as well as completion of an unfinished project. On the bench, the frame can be clipped section by section to keep handling controlled while each insert is prepared for placement. It fits naturally into repair sessions, spare-parts storage and planned restoration work where a specific clear component is needed instead of replacing a larger assembly. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Parts M-B Actros 56335, model accessory
319000498€11.99
This clear parts set is made for the M-B Actros 56335 and provides the transparent molded sections used where glazing and light details define the finished model's look. The sprue includes a large curved windshield-style section, broad side window pieces and several smaller clear inserts that suit lamp or marker positions, giving a rebuild or replacement job the exact type of parts this area requires. The transparent runner format keeps each piece formed to its intended shape, which matters when cab contours, window openings and lens recesses need a clean visual match. Larger panes handle the main glazed areas, while the smaller round and rectangular sections cover the finer details that complete the front and side appearance. The molded markings on the frame identify it as the AA parts set and show the clear material type used for these components. This accessory fits naturally into repair work, restoration of an older build or completion of a model that needs fresh clear sections after wear or loss. On the bench, the grouped layout helps with sorting before cutting, test fitting and final installation on the M-B Actros 56335. Warning! Not suitable for children under 14 years.
Basic accessories
Clear Parts Sprue for MB Arocs Model Kit
319000957€10.99
This clear AA parts sprue is made for the MB Arocs / 56352 and provides the transparent molded sections that give a scale truck build its finished glazing and light detail. Larger clear pieces on the runner form the main screen or window areas, while smaller round and rectangular sections add the crisp transparent accents that solid body panels cannot reproduce. The parts remain attached to a single molded frame for identification before removal, with visible numbering on the sprue to support part matching during assembly. The material marking >PSPS indicates polystyrene, a common choice for sharply molded clear components with defined edges and consistent fit in model construction. The layout groups multiple shapes on one runner, including curved sections, narrow inserts and plate-like transparent pieces that serve different exterior detail positions on the model. This set works as a practical replacement when original clear sections are missing, scratched or incomplete, and it also supports restoration of an unfinished MB Arocs build. On the bench, the transparent parts help restore the visual contrast between painted bodywork and clear glazing, while the smaller lens pieces sharpen the look of lamps and signal details once fitted in place. Warning! Not suitable for children under 14 years.
Basic accessories
D-Parts Batterybox, model truck spare parts
300005565€23.99
D-Parts Batterybox is a spare-parts set for 2-axle and 3-axle truck models, supplying the batterybox-related components needed when a build calls for replacement or completion of this specific section. The molded parts are arranged on sprues, making each shape easy to identify before cutting and fitting them into place. The set includes multiple glossy molded pieces with distinct structural forms, including bracket-style elements, cover-like sections and a longer central support piece with cylindrical mounting posts, elongated slots and raised platforms. Visible molded numbering such as 2, 3, 4, 6 and 8 helps separate the individual components during workshop preparation. This layout supports careful repair work on existing truck models and also helps keep parts grouped when rebuilding a batterybox assembly from scratch. On the bench, the sprued format makes it easier to compare shapes, check orientation and prepare each section in sequence before installation. For truck model projects with missing or damaged batterybox components, this set restores the correct hardware area with parts made for the stated 2-axle and 3-axle applications.
Basic accessories
DD Parts Bag 56366, model spare parts set
319006949€11.79
DD Parts Bag 56366 is a model spare parts set centered on clear molded components for repair, replacement and careful restoration work. The transparent sprue carries multiple small parts in one organized frame, making it easier to identify matching shapes before trimming and fitting them into the intended assembly. The set includes several circular dome-like pieces in different sizes as well as rectangular plate-like sections with raised central details and small holes. This mix supports targeted replacement where a build needs the correct transparent insert or a shaped panel section rather than a generic substitute. Because the parts remain connected to the molding frame, each piece stays separated and visible until use, which helps during planning, comparison and step-by-step removal with a side cutter or hobby knife. The clear finish also suits applications where light covers, windows or similar visible details need to retain their original look. On the workbench, this set fits naturally into repair sessions, part sorting and ongoing maintenance of an existing model. It also supports rebuild projects where a damaged assembly needs specific molded pieces to restore the intended appearance and fit without replacing larger sections unnecessarily.
Basic accessories
Decal Bag for 56020, model accessory, Leopard 2 A6
309400123€11.69
This decal bag is a model accessory for the 56020 Leopard 2 A6 Main Battle Tank and focuses on the markings that give the finished vehicle its specific identity. The waterslide sheet carries Bundeswehr-style registration plates, tactical numbers, insignia and unit graphics that turn large body panels, turret sides and smaller exterior sections into a more convincing scale replica. Alongside the exterior markings, the set also includes warning decals for the track area and printed reference labels for internal connector points. The warning graphics reproduce the caution markings placed near the rotating tracks and drive sprocket on the full-size vehicle. The connector sheet labels positions such as J5, J12, J13, J14, J16, J17, J18, J19, J20, J22 and J24, with functions including output gun, convoy marker, GFS harness, speaker, machine gun, turret motor, throttle motor, recoil motor, steering motor and flash unit. This gives the accessory value beyond surface finishing by supporting organized identification inside the model. During a fresh build, restoration or replacement job, the sheets help return worn markings and reference labels to the tank with clean, model-specific detail. They also suit careful refurbishment work when a Leopard 2 A6 body, turret or internal layout needs the original printed information restored after use or repair. Warning! Not suitable for children under 14 years.
Basic accessories
Diff. Gear Bag, RC spare parts for 56314
309400028€56.99
This differential gear bag is a dedicated RC spare parts set for model 56314 and centers on the mechanical parts that keep drivetrain power moving through the axle assembly. The assortment shown includes metal bevel gears, differential housings or covers, cross shafts, outdrives and long splined shafts, giving a focused replacement set for service work on the differential section. The bevel gear layout supports the transfer of torque between connected drivetrain parts, while the cross shafts and smaller pinion gears form the internal differential action inside the housing. Cup-style outdrives with cross-pin holes connect the assembly to the next driven parts in the system, and the threaded shaft ends support secure installation where the original hardware layout requires it. The machined metal finish visible across the set points to precise tooth profiles and clean mating surfaces, both important when replacing worn internal transmission parts. On the workbench, this set suits rebuilds after heavy running, routine maintenance, or the replacement of damaged gears inside the axle or gearbox area. It also helps keep a compatible model ready for continued use when a full differential refresh is needed rather than changing single parts one by one. Warning! Not suitable for children under 14 years.
Basic accessories
Diff. Shaft A & B, model spare part for 56301
309805458€13.49
Diff. Shaft A & B is a dedicated spare part for model 56301 and is intended for targeted replacement within the matching assembly. The set contains 2 metal shaft components with distinct end profiles, making it suited to a specific mechanical position rather than general-purpose use. The shafts are shown with threaded ends and machined sections that support accurate seating with the corresponding hardware in the designated model. One component features a rounded end section, while the other uses a narrower pin-style end, indicating 2 different roles within the same mechanism. This defined geometry matters when restoring a worn, bent or missing original part, because the replacement needs to match the existing layout and connection points already built into model 56301. As a model spare part, this set fits maintenance work, repair jobs and parts replacement during a rebuild of the specified vehicle. The compact metal components are easy to store with workshop spares and useful to keep on hand when a drivetrain or linked mechanical section needs the correct shaft pair for continued operation. Warning! Not suitable for children under 14 years.
Basic accessories
Drive Sprocket (2), model spare part for 56019
309805943€35.99
This Drive Sprocket set supplies 2 matching replacement parts for 56019 and focuses on one of the key mechanical contact points in a tracked model assembly. The silver-coloured pieces use a circular toothed rim and a spoke-style inner structure, creating the distinctive technical form expected from drive components that engage with a track system. The hub-shaped centre section adds further definition to the part geometry, with a hollow interior that reflects its role as a fitted mechanical component rather than a decorative add-on. The pair format is useful where both sides of a running system need matching parts or where one spare is kept ready for later maintenance. The studio presentation shows the parts from upright and angled views, making the toothed profile, drum-like centre and open inner detailing clearly visible. As a model spare part, the set is intended for accurate replacement on 56019 rather than general cross-range use. In workshop use, the sprockets suit repair jobs where worn or missing drive parts need to be exchanged with matching components. They also fit restoration work on an existing tracked model, where keeping the original mechanical layout matters as much as the finished appearance. Warning! Not suitable for children under 14 years.
Basic accessories
E-Parts Coupler Plate Servo Saver Truck Parts
300005471€23.99
This E parts set supplies coupler plate and servo saver components for compatible truck model assemblies, giving worn or missing mechanical pieces a direct replacement path. The black molded parts arrive on a single sprue, where each shape remains easy to identify before removal and fitting. Visible numbering on the runner helps separate the individual components during workshop preparation, especially when several small mechanical pieces are handled at once. The sprue format keeps the parts organized until assembly begins, which supports cleaner sorting on the bench and reduces mix-ups between similar shapes. The set is aimed at maintenance and repair rather than decoration, with the focus placed on functional hardware used in steering and coupling-related areas. The molded layout also makes it easier to inspect each piece for shape and fit before installation. On a repair bench, this set supports the replacement of damaged truck parts after regular running or long storage. It also suits planned rebuilds where original steering-related pieces need to be refreshed so the model can return to service with the intended mechanical layout.
Electronic
Electric TR Torque-Tuned Motor 33T RC Motor
300056526€58.99
The Electric TR Torque-Tuned Motor 33T is a brushed upgrade motor developed for 1/14 scale R/C tractor truck models, where strong pulling power and controlled running matter more than outright speed. Its low-turn, high-torque setup helps the drivetrain hold pace in top gear with less speed drop, giving tractor truck runs a heavier, more realistic character when the model is moving under load. The motor is equipped with ball bearings, which support smoother rotation and reduce wear at the shaft supports during repeated use. At 7.2 V, it reaches 12,500 rpm without load and delivers a maximum torque of 39.2 mN-m, with an operating range of 6.6-7.2 V. The tuned response also supports more precise control at lower velocities, which is especially useful when lining up a trailer, easing away from a standstill, or managing steady throttle inputs over longer sessions. Lower power consumption helps extend driving time between charges compared with a more power-hungry setup. Installed in a 1/14 scale tractor truck, this motor suits runs that focus on towing, top-gear cruising and measured acceleration rather than high-speed bursts. It also fits maintenance-minded hobby use, as the brush design can be serviced and the bearing-equipped layout is built for regular running and periodic upkeep. Warning! Not suitable for children under 14 years.
Basic accessories
F Parts Highroof M-B Actros 56335 model parts
319000500€36.99
This F Parts set is identified for the Highroof M-B Actros 56335 and serves as a dedicated model supplies component for that truck project. The naming points to the high-roof cab section, which helps keep a rebuild aligned with the intended form of the original design rather than relying on generic substitute pieces. Within a workshop setup, a clearly designated parts set like this supports more accurate maintenance planning for an existing build. The F Parts label distinguishes this group from other component sections in a larger model structure, while the 56335 reference ties it to a specific Actros variant named in the data. That makes the set useful for replacing worn or missing cab-area elements, preparing a stored kit for completion, or keeping a matching spare on hand for future repair work. On the bench, this kind of dedicated replacement part helps keep truck model projects moving when one section needs attention. It fits naturally into restoration, rebuild, and long-term upkeep tasks centered on the Highroof M-B Actros 56335. Warning! Not suitable for children under 14 years.
Basic accessories
F-Parts Axle 56319, model spare parts set
309005896€33.99
F-Parts Axle 56319 provides a focused spare parts set for model vehicle maintenance, with black injection-molded components supplied on sprues for clean identification before installation. The layout supports precise replacement work when a build needs matching structural sections instead of a complete new assembly. Visible in the set are several distinct molded forms, including 2 long rail-style pieces, 2 curved arm-like sections, smaller linkage or mount-style parts, a bracket pair, 1 upright cylindrical piece and 1 larger rectangular housing. Number markings such as 5 and 6 appear on the sprue, adding a practical reference point while sorting and preparing the parts. The molded format keeps edges and connection points intact until each section is removed, which helps maintain order during bench work. The set is suited to repairs where the original geometry of a specific section matters for alignment and placement. On a workshop table, the sprue format makes it easier to compare shapes before cutting, test the intended position of each section and replace worn or missing components with matching forms. For ongoing upkeep of an existing model, this set supports selective repair work without replacing unrelated assemblies. Warning! Not suitable for children under 14 years.
Basic accessories
F-Parts Bag(Fx2), model spare parts set
319008213€10.49
F-Parts Bag(Fx2) is a dedicated spare parts set for compatible Tamiya model or RC applications, supplied as 2 identical black sprue frames with F marking. The layout keeps each molded component attached to the runner until removal, which helps separate small pieces and makes bench work easier to track. Across the 2 frames, the set provides a repeated group of numbered parts visible on the sprues, including curved arm-like pieces, a long narrow bar with circular holes at both ends, 3 small cylindrical bushings or spacers, 2 rectangular mounting blocks and a larger central bracket or holder piece on each frame. The molded numbering beside the parts supports identification during assembly or replacement, especially when a manual or existing build refers to individual part numbers. The duplicated frame format also helps when both sides of a mechanism use matching components or when worn pieces need like-for-like replacement. This set fits naturally into repair, restoration and ongoing maintenance work on a compatible Tamiya build. It also serves as a practical source of original-style replacement pieces when an existing assembly needs the F frame rather than a mixed assortment of generic hardware.
Basic accessories
F-Parts Suspension Brace, Truck model spare parts
300005472€22.49
F-Parts Suspension Brace is a replacement parts set for truck model maintenance, supplied as 1 molded sprue with multiple structural components on a single runner. The black injection-molded frame groups the parts in one place, making it easier to identify and separate the required pieces during a repair or rebuild session. The set covers suspension and brace functions, with shapes intended for mounting, linking and supporting sections within a compatible chassis assembly. Larger bracket-style pieces, curved arm forms and smaller fittings provide the kind of hard parts typically needed when an existing build needs fresh structural hardware rather than cosmetic changes. Because the parts stay attached to the runner before use, sorting and preparation remain clear at the workbench. This format also helps confirm that the full molded set is present before installation begins. F-Parts suits rebuild work, accident repair and routine replacement of worn chassis sections in truck model projects. On a bench beside the main assembly, the sprue gives a focused source for the specific suspension and brace elements needed to return a compatible model to running or display condition.
Basic accessories
FF Parts Side Panel Heavy Rack Model Parts Set
319007444€31.59
FF Parts Side Panel Heavy Rack is a model parts set for builders who need specific body and rack components for a compatible project. The sprue-mounted layout keeps the white moulded sections together before removal, making it easier to inspect the shapes, plan the build sequence and prepare each section for trimming, test fitting and finishing at the bench. The visible parts include 2 large curved rectangular side panels, 2 cylindrical ribbed sections and smaller connecting pieces formed as one unassembled set. That combination suits repair work on an existing model, replacement of worn or missing sections, or conversion work that calls for this exact panel and rack arrangement. The white surface is well suited to primer and paint, while the separate moulded sections allow clean preparation before final installation. Because the parts are supplied on sprues, builders can remove only the needed sections and keep the remaining pieces together until the next stage of assembly. On the workbench, this set supports careful dry fitting, surface preparation and colour finishing before the parts are added to the main build. It also works well as a spare parts source for restoring a compatible model with matching shaped panels and drum-like components.
Electronic
Flash Unit 56010/56020, model accessory cable
307255018€75.99
The Flash Unit for 56010 and 56020 is a model accessory cable designed for matching Tamiya applications that use this specific electrical part. Its layout combines a long black lead, a white multi-pin connector, a rectangular end section and additional red, white and black wires near the connection point, creating a compact harness for the intended internal link. The visible connector format helps distinguish this unit from generic wiring, while the bundled lead keeps the assembly together for handling and installation. Orange-insulated contact points mark the active connection area, and the attached warning tag indicates the high-voltage character of the component. That makes this part especially relevant when restoring the original electrical function of a compatible model or replacing a worn or missing harness with the correct designated unit. In workshop use, the Flash Unit suits repair, maintenance or parts replacement on 56010 and 56020 model builds that require this exact cable format. It fits naturally into a spares box for ongoing upkeep, and its defined connector-and-lead arrangement supports accurate matching when an existing electrical line needs to be exchanged. Warning! Not suitable for children under 14 years.
Basic accessories
Ford Aeromax Sticker Bag, decal set for RC truck
309495289€11.99
The Ford Aeromax Sticker Bag is a decal set for finishing the 1/14 RC Tractor Truck Ford Aeromax with model-specific graphics across the cab exterior and interior. Large blue Ford oval logos, Aeromax name decals, grey trim pieces and orange marker-style panels give the bodywork the markings shown for this truck, while the flat printed sheet keeps each graphic ready for precise application during the final detailing stage. Beyond the outer panels, the sheet also carries dashboard strips, instrument cluster graphics, vent details and console decals that bring more definition to the cab interior. Small permit-style labels, white regulatory lettering and route-style markings add the kind of transport details that make a scale truck scene look more convincing at close range. California and Nevada license plate decals are both included on the sheet, giving 2 regional plate options for the finished model. Numbered positions on the sheet help align each marking with the intended area of the body or interior. This decal sheet suits replacement work on an existing Ford Aeromax build as well as a fresh finishing pass on a newly painted cab. Applied to body panels, dashboard sections and trim areas, the graphics help the truck read clearly as a Ford Aeromax from shelf display distance and in close-up hobby photography. Warning! Not suitable for children under 14 years.
Basic accessories
Frame L&R for 56301, model spare part
309805455€53.99
Frame L&R for 56301 provides 2 matching frame rails for the specified model, with a black metal construction and a long U-shaped channel form that supports the structural layout of the assembly. The evenly spaced round holes and elongated slots create clear fastening points, so the rails can be positioned where alignment and secure mounting are required. The left and right configuration matters because mirrored frame sections handle the geometry of a larger build differently than a single straight bracket. Here, the hole pattern runs across the rail length, while the raised tabs at one end add further mounting points for connected sections. That combination makes these parts suited to repair work, replacement of damaged sections, or restoration of an existing 56301 build where the original frame geometry needs to be maintained. The metal format also gives the rails the rigid profile expected from structural chassis components. In workshop use, these rails fit naturally into rebuilds that focus on bringing a model back to its intended structure after wear or damage. They also suit planned maintenance where a bent or missing frame section would affect how adjoining parts line up during reassembly. Warning! Not suitable for children under 14 years.
Basic accessories
Fuel Tank Sun Visor, model parts set for S770
319225229€24.29
This molded parts set supplies a fuel tank, a sun visor and additional exterior components for the S770, all formed in black material on a single sprue. The frame keeps each section organized before removal, so the build starts with a clear overview of the shapes, mounting points and numbered references needed for placement on the model. Alongside the main tank and visor pieces, the sprue carries smaller caps, brackets, connectors and rod-like elements that support a more complete restoration or replacement job. The numbered layout helps match each section to the intended position during assembly, especially when several similar small fittings appear on one frame. Because the parts arrive unassembled, trimming, cleanup and surface finishing can be handled to suit the condition and style of the existing build. The black molded finish also suits projects where matching darker trim sections matters. On the bench, this set fits naturally into repair work, parts replacement or a paused build waiting on missing exterior pieces. It also works well as a reference frame for checking shapes and part locations before separating components for final installation on an S770 model. Warning! Not suitable for children under 14 years.
Basic accessories
G Parts Bag 56366, model parts set, black sprues
319006952€39.99
G Parts Bag 56366 supplies a grouped set of black molded components for scale model assembly, with the parts arranged on sprue frames for clear handling at the workbench. The visible selection includes a large box-like shell section, a broad base panel and smaller fitted pieces that suggest a structured mechanical module with layered outer and inner surfaces. The base section shows molded reinforcement detail and round mounting points, giving builders clear reference locations when test-fitting adjoining sections. A square hatch-style panel with a recessed handle adds another defined surface element, while the long narrow frame pieces introduce linear structure that can read as rails, supports or ladder-like sections depending on the build. Smaller rectangular components remain attached to the runners until removal, which helps keep matching parts together during trimming, cleanup and paint preparation. The black material also makes panel edges, recesses and attachment points easy to distinguish while planning the next assembly step. On the bench, this parts set suits careful dry-fitting, surface finishing and staged sub-assembly work. It also supports replacement or restoration tasks where the correct molded section is needed to complete a specific build area with matching form and detail.
Basic accessories
G-Parts Bag G, model parts set for 56360
319004978€29.49
G-Parts Bag G is a moulded parts set for 56360, arranged on a single sprue with several structural sections that support repair, replacement or continued assembly work. The layout centres on a large chassis-style base plate, joined by a second flat panel and a group of smaller technical pieces that can be separated as needed for the matching model. The main sections show multiple cutouts, slots, screw holes and raised mounting points, indicating defined connection areas for further mechanical or body-related assemblies. Alongside the larger plates, the sprue also carries round disc-shaped parts, a rectangular cover-style section, a curved support-like piece and a narrow central structural element. This combination makes the set useful when a build needs specific frame-related parts from the original moulded runner rather than a single loose replacement piece. On the bench, the one-piece sprue format keeps all sections together until trimming begins, which helps with part identification and organised handling during a rebuild. The black moulded finish gives the set the technical look expected of vehicle understructure components, while the varied shapes and mounting features make each section easy to match to its intended position within model 56360. Warning! Not suitable for children under 14 years.
Basic accessories
G-Parts Coupler-Main-Plate Trucks Parts Set
300005473€23.99
This G-Parts set provides the Coupler-Main-Plate truck components as a single molded sprue, giving model builders a direct source for replacement or repair work on an existing Tamiya truck build. The black runner keeps each piece in its original molded position, making the shapes easy to inspect before cutting, trimming and fitting. The frame carries a large rectangular plate together with smaller matching sections, including square mounting pieces, ring-shaped parts and elongated molded elements. That layout helps separate major structural pieces from smaller connection parts while keeping the full group organized on one runner. Because the parts remain attached until removal, each section can be checked against the build step or worn component before installation. The molded arrangement also supports careful bench work, where clean part removal and dry fitting matter as much as the final placement. On the workbench, this set suits rebuilds, parts replacement and restoration of an older truck chassis assembly. It also helps when a damaged section needs to be swapped without replacing a larger assembly, keeping repair work focused on the exact molded components required.
Basic accessories
GG Parts Bag 56366, model parts set, chrome finish
319006953€27.49
GG Parts Bag 56366 adds bright exterior detailing to a scale model build with chrome-colored injection-molded parts arranged on a single sprue. The set centers on a wide tubular guard frame and 4 round lamp housings, creating the plated look often used for classic custom trim, utility bars or auxiliary lighting. The connected runner layout keeps each section together until trimming starts, which helps when planning the order of assembly and test fitting. Alongside the main frame and lamps, the sprue also carries cross-shaped supports and smaller paired bracket pieces that can be used as mounting hardware within the intended build. The chrome-look finish gives each contour a crisp edge, so curved bars, round lamp faces and compact attachment points remain visually distinct after installation. Visible sprue markings include GG, 5 and 2. On the bench, these parts suit builders refining a vehicle model with added front or rear bar detail and extra lighting accents. Once fitted, the plated surfaces catch the eye around the body shell and help smaller exterior components read clearly in close-up photos or shelf display scenes.
Basic accessories
GG-Parts Bag, model parts set, translucent orange
319006849€11.49
GG-Parts Bag is a model parts set with translucent orange injection-molded components that add visible detail to a compatible build. The runner carries several small lens-style pieces and 1 larger curved cover piece, giving the set a clear focus on replacement or finishing work where color, shape and molded texture need to match the original assembly. The translucent material suits parts that are meant to remain visually distinct on the finished model, and the attached sprue layout keeps each piece organized until the required section is removed. Molded surface texture on the smaller components supports a defined light-like appearance, while the larger curved section provides a broader shaped panel from the same runner. This makes the set useful when a build needs specific orange detail parts rather than a general assortment of hardware. Batteries are not included. On the workbench, the set fits naturally into repair jobs, restoration projects and careful parts replacement on an existing model. It also supports builders who want to complete a stored kit with matching molded components instead of substituting a different color or shape from another source.
Basic accessories
Globe Liner P-Parts Dashboard Spare Parts Set
300115178€24.99
The Globe Liner P-Parts dashboard set is a dedicated spare parts frame for the Tamiya 56304 truck model, focused on restoring interior sections with matching molded components. The sprue format keeps each piece organized before removal, which helps when planning a repair, replacing damaged cabin sections or completing an unfinished build. Visible parts on the frame include 4 ribbed seats, a steering wheel, a dashboard or console section, a floor panel with molded openings, a rectangular mounting panel and a long box-shaped interior or body component. This combination supports work on the cabin layout rather than exterior decoration alone. The molded pieces arrive unassembled and can be prepared with the usual model-building steps such as trimming, test fitting and paint finishing where required. As a dedicated parts set rather than a full kit, it suits targeted restoration work on an existing Globe Liner build. On the workbench, the frame gives model builders a practical way to replace worn interior details without sourcing each cabin section separately. It also fits rebuild projects where an older 56304 model needs fresh cockpit parts to bring the truck back into a more complete display condition. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler Chassis Frame L/R, spare part set
314305649€60.99
The Grand Hauler Chassis Frame L/R set provides the two side members that define the main structure of the truck chassis. Each rail is a long black metal strip with folded edges, creating the shaped profile needed for a frame section that sits straight and connects cleanly with surrounding parts in the assembly. A series of pre-drilled holes and elongated slots runs along both rails, giving multiple fastening points where the chassis layout requires them. That hole pattern matters during repair work, because the frame section has to match the original mounting positions rather than relying on improvised drilling or reshaping. The left and right format also keeps the replacement specific to the Grand Hauler designation in the data, instead of treating the frame as a generic strip. For model maintenance, this kind of matched structural pair is useful when a rebuild calls for fresh side members with the correct length, profile and opening layout. On the workbench, the rails suit careful restoration of the truck's central understructure before the larger build is reassembled around them. They also fit parts sorting and planned repair sessions where the frame geometry needs to be brought back to the intended layout with dedicated replacement members. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler D-Parts, model parts, chrome bumper
319000760€27.99
Grand Hauler D-Parts focus on the front bumper area and bring chrome-colored styling to a truck model build. The runner holds several shaped components in a reflective metallic-look finish, giving the front end a brighter, more defined appearance once fitted in place. The set centers on exterior detailing rather than mechanical changes, making it a useful choice when a build calls for fresh trim pieces in the bumper section. Curved grille-like forms, bracket-style elements and panel sections on the sprue show the variety of shapes used around the front of the model. Because the parts arrive attached to the runner, each piece stays organized until removal and assembly. The chrome-colored surface emphasizes molded lines and contours, which helps the finished truck present a more finished scale character at the nose. On the bench, these parts suit replacement work, detail restoration or a visual refresh of an existing Grand Hauler build. In a display setting, the reflective finish draws attention to the front fascia and pairs naturally with other bright exterior accents on a truck model. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler H-Parts Rear Fender Set, model parts
319000761€25.99
The Grand Hauler H-Parts Rear Fender set adds a clean replacement route for a truck build that needs fresh rear body panels. The pack provides 2 injection-molded fender components, shown on sprues in an unused state, with smooth curved outer surfaces and molded mounting details that suit careful finishing work. The white parts arrive unpainted, which leaves colour choice open for matching an existing cab and chassis scheme or for a full visual update during a rebuild. Small circular and rectangular molded sections with holes are attached on the frame alongside the main pieces, indicating connection points and supporting detail around the final fit. Because the set is identified specifically for the Grand Hauler, it suits targeted restoration, replacement or parts-based workshop planning rather than broad universal use. On the bench, the sprue format helps keep both main fenders and the smaller attached sections together until trimming begins. During a repair or refresh of a display truck, the paired layout supports a consistent rear view across both sides and gives the bodywork a complete, balanced finish once painted and installed. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler K-Parts, clear parts set
319115421€10.79
The Grand Hauler K-Parts clear parts set adds the transparent finishing elements that give a scale truck build its crisp visual definition. Supplied as a molded clear runner, it provides small formed components for the Grand Hauler and supports accurate replacement work when original clear sections are no longer available or no longer presentable. The runner groups several parts in one frame, which helps keep matching pieces organized before trimming and test fitting. Clear molded components are especially useful on visible exterior areas where light lenses, covers or similar detail sections need transparency rather than an opaque finish. The image shows round textured inserts, small cylindrical forms and rectangular molded sections, giving builders multiple detail shapes from one dedicated sprue. Because the set is tied to the Grand Hauler designation, it suits model-specific maintenance as well as careful restoration work on an existing build. On the bench, this kind of replacement sprue helps refresh a display truck with cleaner transparent details or complete a project that needs missing clear sections. It also fits neatly into a spare-parts setup for long-term upkeep of a Grand Hauler model. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler L-Parts, model parts in clear orange
319115423€10.79
Grand Hauler L-Parts in clear orange add the exact translucent colour and designated section needed for a focused model build or replacement task. The frame shown in the product data carries multiple small formed pieces together with larger rounded dome-like elements, all supplied on a single injection-moulded runner for organised handling before removal. The L marking on the sprue identifies this specific parts group within the Grand Hauler range, which matters when a build calls for one defined section rather than a broad assortment of unrelated components. The clear orange finish changes how light passes through the moulded shapes, giving these parts a distinct visual role wherever the model design uses transparent coloured details. Because the components remain attached by thin connectors, the layout stays easy to inspect before trimming and fitting. Visible moulded identifiers on the frame support part recognition during build preparation. This parts frame suits repair work on an existing Grand Hauler model as well as planned replacement during a fresh assembly. On the bench, the grouped runner format helps keep the required pieces together while the build moves from checking the sprue to cutting, finishing and fitting each part into place. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler muffler covers, model spare part
313585115€32.49
These Grand Hauler muffler covers are a dedicated spare part for restoring or completing the exhaust area on the truck model. The set provides 1 cover with an elongated, slightly curved form that matches the line of the mounted muffler section, helping the finished build keep its intended silhouette and trim detail. The chrome-colored surface brings a bright metallic note to the side of the vehicle and suits builds where polished truck hardware is part of the visual character. The open channel profile supports mounting as a formed cover rather than a flat decorative strip, which matters when replacing a missing original part on a detailed model. As a model supply within the Tamiya range, this part is suited to maintenance work, careful rebuilds and projects that need the correct Grand Hauler-specific exhaust trim rather than a generic substitute. On a workshop table, the cover fits naturally into repair sessions focused on bringing a used truck back to complete condition. It also suits fresh assembly work when a replacement is needed to keep the muffler area aligned with the rest of the model's exterior detailing. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler Propeller Shaft Long Spare Part
313485215€14.49
The Grand Hauler Propeller Shaft Long is a dedicated spare part for model maintenance, built to restore a specific mechanical link within a matching Grand Hauler assembly. Its long, straight shaft format and metal construction suit drivetrain transfer duties where a clean connection between two mounted points is required. Each end is formed as a polished connector with a ball-shaped tip and short cross pin, giving the part a defined coupling layout rather than a plain rod profile. That end geometry matters during service work because it determines how the shaft seats into the surrounding mechanism and how movement is passed through the connected sections. Supplied as 1 piece, it fits focused replacement jobs where only the worn or damaged shaft needs to be changed instead of replacing a larger assembly. On a workbench, this kind of spare part helps bring an existing truck model back into running condition with the correct long shaft format named for the Grand Hauler. The clean silver finish and uniform cylindrical body also make visual inspection straightforward when comparing the old part against the replacement before installation. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler Q-Parts Accessory Set, Chrome Details
319115424€42.99
The Grand Hauler Q-Parts accessory set brings chrome-plated detail to a truck model with fuel tank and roof lamp components arranged on a single sprue. The reflective finish gives exterior sections a bright metallic look that stands out on the cab and side areas once the parts are trimmed, prepared and fitted into place. Alongside the cylindrical tank halves, the runner also carries round covers, small caps, bracket-like pieces and compact trim elements that support a coordinated appearance across multiple visible points of the build. Because the parts are supplied as separate molded components, placement can follow the layout of the model rather than forcing a single preassembled unit. The plated surface suits display-focused finishing, where contrast between painted body panels and bright metal-look accents helps define the truck's shape. The set is intended for model use and centers on exterior detailing rather than mechanical function. On the workbench, these parts fit naturally into a custom truck project, a restoration of an existing Grand Hauler build or a visual refresh of selected sections. Once installed, the roof lamp and tank details help frame the upper cab line and side profile with a more elaborate road-truck character. Warning! Not suitable for children under 14 years.
Basic accessories
Grand Hauler radiator grille, model parts set
319225174€43.99
The Q-Parts Radiator grill Grand Hauler adds bright plated detail to a scale truck build with a large perforated grille and a coordinated selection of exterior trim pieces on one chrome-finished sprue. The reflective finish gives front-end sections, tanks and pipe elements a crisp metallic look that stands out clearly during detailing work at the bench. Beyond the grille itself, the runner layout shows curved pipe sections, cylindrical tank forms, wheel-related trim parts, brackets, steps and smaller body details that support a visually consistent finish across several visible areas of the model. Keeping these pieces on a single sprue helps builders sort, prepare and fit matching plated components during a repair, refresh or custom detailing session. The perforated grille pattern adds depth to the truck face, while the plated surfaces catch light across edges and contours that would read flatter in an uncoated finish. This set fits naturally into restoration work on a Grand Hauler build, where worn exterior accents need replacement, and it also suits custom projects that call for brighter highway-truck styling. On a display shelf or during close-up photography, the chrome-toned parts help define the grille, tanks and pipework with stronger visual separation between body sections and trim. Warning! Not suitable for children under 14 years.
Electronic
Gun Elevation Unit Tiger 56010, model accessory
304205021€34.49
The Gun Elevation Unit Tiger 56010 adds motorized movement to a compatible Tiger model through a compact gearbox assembly built around a silver electric motor, a metal mounting bracket and a stepped gear train. A large black gear works with 2 white gears to transfer the motor's rotation into controlled elevation movement, giving the gun mechanism a clear mechanical function rather than a static display position. The assembly combines the drive section and mounting hardware in one format, with a plate, screws and axle shaft already arranged as part of the unit. Exposed gears make the mechanism easy to understand during installation, while the rectangular motor housing keeps the drive section compact inside the model structure. Yellow and gray twisted wires extend from the motor for connection into the electrical layout of the build. This is a dedicated model accessory rather than a general-purpose motor, so its value lies in adding a specific moving function to the Tiger setup named in the data. In a finished compatible build, the unit supports scenes where the gun angle changes to match terrain, target position or display setup. During a detailed retrofit or repair, the geared assembly also helps restore the intended powered elevation action with the correct type of mechanism for this application. Warning! Not suitable for children under 14 years.
Basic accessories
H Parts Front Bumper, model spare part sprue
319000849€21.99
H Parts Front Bumper is a model spare part set for hobby building and repair work, supplied as a white molded sprue sheet with the parts still attached to the frame. The layout keeps each section visible before removal, which helps with part matching and planning during a careful rebuild or replacement job. The visible contents show a large body-related shell section with window openings, 2 matching mechanical-looking halves, a rectangular plate with 4 holes, 2 curved bumper-style pieces, 2 small round cap-like parts and several narrow connector pieces. This combination points to a body and detail parts group rather than a complete vehicle, making it useful when a matching build needs specific replacement sections instead of a full new kit. The molded markers visible on the frame include D, B, 8, 9 and 10, adding another reference point during identification and fitting. On the workbench, the sprue format supports a measured workflow: compare the frame to the required section, remove only the needed piece, then continue with trimming and installation on the matching model. For restoration projects, incomplete kits or damaged body assemblies, this spare part set keeps the repair focused on the exact area that needs attention. Warning! Not suitable for children under 14 years.
Basic accessories
H-Parts Bag(H), model parts set for vehicle body
319004950€21.99
H-Parts Bag(H) is a model parts set centred on vehicle body construction, with white styrene pieces supplied on a rectangular sprue frame. The layout keeps the larger cab or main shell section, side panels and smaller insert parts grouped together, which helps when identifying each section before cutting and fitting. The moulded shapes show pronounced wheel arch lines and body panel contours, giving the shell its character before paint and final assembly. Because the parts arrive unassembled on the frame, each section can be trimmed, cleaned and prepared in sequence rather than handled as one finished shell. Smaller central inserts add further structure and detail to the body area, supporting a more complete build where damaged or missing original parts need replacement. As a dedicated parts bag, this set is suited to repair work, restoration tasks or the completion of an existing model that requires the correct body-related sections. On the workbench, the sprue format supports an orderly building routine: identify the needed section, remove it from the frame, then sand, test fit and finish it alongside the matching panels. It also suits parts storage between sessions, since the unused sections remain connected until needed.
Basic accessories
H-Parts Fuel Tanks, model parts for 56301/56304
300005474€22.49
H-Parts Fuel Tanks 56301/56304 adds chrome-plated exterior components for compatible truck model builds, bringing bright metallic surfaces and recognisable hardware shapes into the finished look. The set is intended for 56301 and 56304, making it a focused choice when a build needs matching tank sections and related trim rather than a generic assortment of accessories. The sprues shown for this set carry 2 large cylindrical tanks with dark centre sections and chrome end bands, along with curved and straight pipe pieces, pointed cone-style parts, textured plates with a diamond-plate pattern, a curved guard or frame piece, and a box-like panel component. That mix supports the visual structure often seen along the sides of scale trucks, where tanks, piping and plated surfaces break up large body areas with more mechanical detail. The chrome-plated finish gives these parts a reflective appearance that stands out against painted cab and chassis sections. This set suits repair work, restoration of older builds, or detail-focused custom projects based on 56301 and 56304. During assembly and finishing, the separate parts can be prepared, painted where needed, and fitted to rebuild missing exterior sections or refresh the overall presentation of a truck model with matching hardware elements.
Basic accessories
H-PartsFront Bumper/Side Guard, model parts set
319005974€23.49
H-PartsFront Bumper/Side Guard 56325 provides model-specific exterior sections for repair, replacement or ongoing assembly work. The set is supplied as white injection-moulded parts on a sprue and centers on a front bumper and side guard layout, giving a clear starting point for restoring the outer structure of the matching vehicle area. The runner format keeps the individual sections together until preparation begins, which helps when checking shapes, cutouts and mounting points before removal. Visible panel lines, formed openings and screw-hole positions support accurate alignment with the surrounding bodywork. Alongside the larger sections, the set also carries smaller matching pieces that complete the relevant exterior area and help maintain a consistent look across the rebuilt section. This kind of parts set suits workshop use when an existing build needs fresh exterior pieces after wear, damage or a rebuild. It also fits ongoing assembly projects where the correct moulded sections are needed to continue with body preparation, surface finishing and final installation on the intended model. Warning! Not suitable for children under 14 years.
Electronic
HeadLight FogLamp Bulbs, LED light set
307175096€42.99
This LED light set is built for compatible model lighting layouts that use separate headlight and fog lamp positions. Multiple clear lamp housings are prewired to a compact harness, and the white plug connector provides a defined connection point for matching electronics. The bundled lead arrangement in black, white and orange keeps the wiring grouped together, which helps when routing the set through narrow body cavities or around existing chassis components. The layout shown here centres on functional lighting parts rather than body trim or cosmetic add-ons. Clear lamp ends, a tied cable section and the extended orange lead indicate a harness prepared for installation as a single assembly instead of loose individual bulbs. That makes the set useful for replacement work on an existing build or for restoring light functions on a compatible vehicle. The small format also suits projects where space around the front body section is limited and cable control matters during fitting. On the bench, this kind of wired module supports careful, component-led work: connector placement, lead routing and lamp positioning can be matched to the intended light locations. In a finished compatible model, the set serves the specific task named in the designation, bringing headlight and fog lamp points back into operation with dedicated LED parts. Warning! Not suitable for children under 14 years.
Basic accessories
Hitch/Chassis Rear End, model parts set 56371
319225235€25.99
This XX Parts Hitch/Chassis rear end 56371 set supplies molded replacement components for the rear chassis and hitch area of a compatible Tamiya model. The 2 sprues carry black and dark gray parts with structural shapes, mounting holes, bracket forms and smaller mechanical sections that support an accurate rebuild where the rear end needs fresh components. Larger plates and frame-like sections handle the main structure, while smaller rings, housings, lever-style pieces and cover elements fill out the detailed rear assembly. Keeping the parts attached to the runners helps with identification during sorting and test fitting before installation. The molded forms and mirrored pieces also support clean alignment when replacing matching left and right sections. As a dedicated spare-parts pack, this set focuses on restoring the original layout of the rear chassis zone rather than mixing unrelated universal hardware. On the workbench, the set suits repair jobs after wear, damage or incomplete earlier builds. It also supports careful restoration of an existing truck model when the hitch mount or rear structural area needs the correct shaped components to bring the assembly back into working order.
Basic accessories
Interior Parts Set, model accessory for MB Arocs
319115455€15.79
This interior parts set is made for MB Arocs model work and brings key cab details together on one white molded sprue. Dashboard elements, 2 front seats, a steering wheel, side panels and smaller control parts give the cabin area a defined structure that stands out once assembled and finished. The rectangular runner frame keeps the components organized before removal, which helps during planning, trimming and paint preparation. Larger pieces such as the dashboard and seating establish the main cockpit layout, while narrower trim sections and lever details fill in the smaller visual zones that make a truck interior look more convincing at scale. Molded identifiers on the sprue support part recognition during the build, and the unassembled format leaves room for careful surface preparation and precise placement. On the bench, this set suits builders refining a truck cab with added interior definition rather than leaving the inside sparse. During painting and final assembly, the separate parts allow the cabin to be approached section by section, from the seating area to the controls and side trim, for a cleaner and more deliberate finish. Warning! Not suitable for children under 14 years.
Basic accessories
K Parts Fender M-B Arocs, model spare parts
319115454€17.49
K Parts Fender M-B Arocs / 56352 supplies shaped body components for a scale truck build, centring on the fender area and adjoining exterior sections. The set is presented as a white moulded sprue with multiple unassembled parts, giving builders the exact pieces needed for replacement work, restoration, or a fresh body assembly tied to this designation. The sprue layout groups several distinct panel forms, including 2 large curved fender or wheel-arch sections, 2 matching side or bumper elements, smaller rectangular panels, larger mirrored structural pieces, a long narrow strip with raised rivet or bolt detail, and small mounting parts. That mix supports careful cutting, cleanup and test fitting before paint is applied. The white styrene surface also makes edge preparation and seam checking easier during the finishing stage, especially when matching adjoining body lines across both sides of the truck. On the bench, these parts suit repair of worn or damaged bodywork as well as completion of an unfinished M-B Arocs project. The mirrored layout helps keep left and right body sections visually consistent, while the separate trim-style pieces allow more precise work around wheel arches and outer panel transitions. Warning! Not suitable for children under 14 years.
Basic accessories
K Parts Fr.Fender Cab M-B Actros, spare parts set
319115368€22.99
This spare parts set for the M-B Actros 56335 focuses on front fender and cab sections, giving model builders a direct route to restore damaged exterior areas or replace missing body components. The off-white molded frame holds multiple shaped pieces together in one organized layout, so the main cab structure and matching detail sections can be prepared from a single sprue. The parts layout shown on the frame includes large curved panels, 2 bucket-style seats, and several smaller interior or trim elements that support a more complete rebuild than a single replacement panel alone. Molded identifiers such as A1, A2, A3 and onward are placed beside the attachment points, helping with part recognition during cutting, sorting and test fitting. This kind of numbered sprue format suits careful repair work, where matching the correct section before assembly matters as much as the final fit. On the bench, the set supports body restoration, replacement after wear, or preparation for a fresh cab build on the M-B Actros 56335. It also suits hobby setups where original panels need to be swapped before painting, detailing, or reassembly with existing compatible model components. Warning! Not suitable for children under 14 years.
Basic accessories
K-Parts Aeromax Dashboard, model accessory
300115231€20.99
The K-Parts Aeromax dashboard set is a model accessory for 56309 that concentrates on the visible interior of the cab. Moulded cabin pieces such as seats, a steering wheel, dashboard sections and console-style parts give the Aeromax build a defined cockpit structure that stands out through the windows and windscreen. The white sprue presents the parts unassembled, which supports careful trimming, surface preparation and paint planning before final fitting. Separate interior pieces make it easier to work across distinct zones of the cab instead of treating the whole area as one moulded block. That layout suits builders who want to add colour contrast, pick out instrument areas and bring more depth to the seating and control section. Thin lever-style parts and smaller trim elements extend the detailing beyond the main dashboard shape and help complete the cabin scene with more specific fittings. On the bench, the set supports a focused interior stage within a larger 56309 build. Once fitted, the added cabin structure gives the Aeromax model a more finished look in display settings and rewards close-up viewing of the driver area. Warning! Not suitable for children under 14 years.
Basic accessories
K-Parts Bag Fitting Parts, model accessory set
319115488€43.99
K-Parts Bag Fitting Parts (K) is a model accessory set focused on the small molded sections that give a vehicle build its finished look. The silver sprue holds multiple unassembled components in one frame, making it easier to identify, remove and prepare each section during a careful build or replacement job. The visible parts include grille-style pieces, bumper and trim sections, mirror arms, mirror heads, handles and larger panel elements. This mix supports work on the exterior areas that define the outline and surface character of a scale vehicle. Because the components remain attached to the sprue before use, each section stays organized through inspection, cutting and test placement. The metallic silver finish suits details intended to represent chrome or polished metal areas on the completed model. This set fits naturally into a workshop setup where an existing build needs specific fitting parts replaced, or where a project is being completed with the correct molded sections. It also helps when a builder wants to keep spare detail parts on hand for later repair work, touch-ups or a second pass on visible trim areas.
Basic accessories
K-Parts Bag K, fitting parts set for model kits
319115514€33.49
K-Parts Bag K is a fitting parts set for model kits, centered on a chrome-finished sprue that brings a bright metallic surface to visible exterior details. The frame holds multiple unassembled components in one runner, so the parts stay organized until they are cut free and placed during the build. The assortment on the sprue covers several distinct shapes, including perforated step plates, front sections with window openings, rectangular grille-like elements, curved bar-style pieces, a long ribbed panel and a long smooth strip. That mix supports detailed work across several vehicle zones rather than repeating one single shape. Smaller mirror- or bracket-like pieces add further fine detail where the build calls for compact exterior fittings. The chrome-plated finish gives these molded parts a clean reflective look that stands out against painted body sections and other construction materials. On the bench, the single runner format helps with part identification before trimming, cleanup and placement. During assembly, the varied shapes suit careful detailing on cab, side and front areas, where trim lines, steps and fitted accents help the finished model read with more scale character.
Basic accessories
K-Parts Fender Wheel Housing, model accessory
309115180€22.49
The K-Parts Fender Wheel Housing set is a model accessory created for the 56318 platform and focuses on one specific body area: the fender and wheel housing section. As a dedicated replacement part, it supports tidy repairs when the original section shows wear, damage or loss, and it helps return the model to its intended body outline around the wheels. Because this set is tied to 56318, it suits maintenance work that calls for a matching part instead of an improvised substitute. The fender area shapes the visual transition between body and wheel opening, so replacing it with the correct K-Parts section helps preserve the model's original look. This also makes the set useful for ongoing upkeep of a working display or a long-term build that needs selected body sections renewed rather than fully replaced. On the bench, the set fits naturally into repair, restoration and parts-management routines for the 56318 model. It can be kept as a workshop spare for future maintenance or used to complete a body refresh when the wheel housing area needs attention after regular handling. Warning! Not suitable for children under 14 years.
Basic accessories
K-Parts Headlight Glasses, model accessory set
300115192€8.29
K-Parts headlight glasses M-B 56305 add transparent light detail to a scale vehicle build with molded clear parts that bring sharper definition to the front end. The sprue carries multiple lens pieces with rectangular forms and fine surface patterning, giving each light area a more realistic optical look once separated and installed. The clear molded parts show ribbed lines, grid textures and reflector-style internal detailing that suit precise finishing work on a model based on 56305. Larger and smaller lens elements on the same runner support matched placement across the body, while the numbered tabs on the frame help distinguish individual parts during the build. The transparent material allows light housings and exterior trim sections to read as separate components rather than painted shapes. This makes the finished model look more layered and mechanically defined at close range. On the workbench, the sprue format supports an orderly sequence of trimming, test fitting and placement with the rest of the build. During final detailing, the clear inserts can be combined with careful paintwork around the housings to emphasize panel lines, lamp shapes and the character of the vehicle front. For restorations, replacements or fresh builds of the matching model, these K-Parts lenses focus on the small visual elements that complete the overall scale impression. Warning! Not suitable for children under 14 years.
Basic accessories
K-Parts Wheel House MAN TGX model spare parts
319115273€13.99
This K-Parts Wheel House set is a dedicated spare-parts frame for the MAN TGX 56325, supplying the moulded sections needed where a build calls for replacement wheel house components. The white runner layout keeps each piece attached and visible, so the shapes and part positions can be checked before removal and fitting. The frame shown carries multiple moulded parts, including 2 large curved wheel house sections with circular mounting holes, 2 rectangular flat panels, 2 box-like components and 1 narrow central piece. That arrangement makes this set useful for restoring a damaged build, replacing lost sections or preparing a clean rebuild with matching shapes from the original tooling. The unpainted finish leaves the parts ready for the same surface preparation and colour matching as the rest of the model. On the bench, this set supports careful repair work on a MAN TGX 56325 where the wheel arch area or adjacent fitted sections need fresh parts from the correct K sprue. It also helps keep an ongoing truck project moving when a single damaged section would otherwise interrupt assembly or finishing. Warning! Not suitable for children under 14 years.
Basic accessories
King Hauler K-Parts, clear spare parts set
300115104€9.29
King Hauler K-Parts is a clear spare parts set for the King Hauler, supplying transparent molded components for restoration, repair or completion work on the model. The sprue format keeps the parts together before removal, making it easier to identify each section during bench work and to prepare replacements for the correct mounting points. The frame carries 4 main clear pieces, including 2 rectangular sections and 2 round sections. Surface treatment differs across the parts: the rectangular pieces show etched line detailing, while the round pieces use a vertical ribbed texture. That combination matters on a scale truck build because clear lenses and covers rely on molded patterning, not only shape, to reproduce the look of fitted light units and trim elements. Visible molded markings on the frame also help distinguish the set during parts storage and workshop organisation. This set suits rebuilds after wear, replacement of missing clear sections, or careful refresh work on an existing King Hauler. It also fits ongoing workshop stock for model maintenance, where dedicated clear spares help keep repair jobs focused on the exact section that needs changing. Warning! Not suitable for children under 14 years.
Basic accessories
King Hauler L-Parts, model spare parts set
300115105€9.29
King Hauler L-Parts are a dedicated spare parts set for kit 56301, supplied as a translucent orange molded frame with multiple replacement components for restoration and maintenance work. The set supports accurate repair where the original build needs matching pieces rather than improvised substitutes, helping preserve the intended look and fit of the model. The frame carries several small molded sections in one organized layout, including round and rectangular forms that can be separated and installed where needed on the existing build. This format makes it easier to identify, sort, and compare each piece against the corresponding location on the model before fitting. The translucent orange finish is a defined visual characteristic of this set and helps match sections that depend on that specific color tone. As a spare parts release rather than a full kit, the focus stays on targeted replacement for the named King Hauler version. On the workbench, the set suits careful rebuilds after wear, loss, or damage to original components. It also fits partial restorations where only selected sections of the 56301 model need renewal, allowing the existing build to return to a more complete and consistent appearance. Warning! Not suitable for children under 14 years.
Basic accessories
King Hauler P-Parts Dashboard, spare parts set
300115108€23.49
King Hauler P-Parts Dashboard is a molded spare parts set for the 56301 model, centered on interior-style and control-area components used during a repair, restoration, or completion build. The white parts come attached to a single sprue, which keeps the individual shapes grouped together until trimming and fitting begin at the bench. Visible pieces on the frame include a steering wheel, a dashboard panel with circular instrument-style openings, seat-shaped sections, support elements, rods, and larger molded panels. This layout helps identify matching parts before removal and gives a clear view of how each section relates to the original assembly. As a dedicated replacement set rather than a full vehicle kit, it focuses on the molded section named in the designation and supports accurate substitution when original parts are lost, damaged, or incomplete. The set is intended for the King Hauler 56301 reference named in the data. It fits naturally into workshop tasks such as restoring an older build, replacing a damaged dashboard area, or completing a model that is missing interior sprue parts. On the bench, the grouped frame format supports step-by-step trimming, sorting, and test fitting before final installation. Warning! Not suitable for children under 14 years.
Basic accessories
King Hauler R-Parts 1, model parts set
300115110€19.29
R-Parts 1 for the King Hauler 56301 supplies model-specific plated components for a truck build that depends on bright exterior accents and crisp molded detail. The chrome-plated finish gives the visible parts a reflective metallic look, while the attached sprue layout keeps each piece organised before cutting and fitting at the bench. The frame shown here carries several distinct shapes, including 2 large rounded domes, a rectangular panel with 2 circular openings, a ring-shaped part, smaller round pieces and 2 textured box-like components with diamond-plate surface detail. That mix points to exterior fittings and trim elements used to complete the visual character of the King Hauler rather than structural chassis hardware. As a dedicated R-Parts set, it suits repair work, restoration of an older build or replacement of worn plated pieces on model 56301. On the bench, the plated surfaces help the finished truck stand out around cab and accessory areas where metallic contrast matters most. For builders revisiting a King Hauler or completing a detailed assembly, this parts frame provides the specific shapes needed to restore missing trim and keep the model's look consistent. Warning! Not suitable for children under 14 years.
Basic accessories
King Hauler Sticker Set, RC truck decal sheet
309495161€15.29
The King Hauler sticker set is the finishing sheet for the 56301 truck version, bringing the cab and sleeper panels to life with long mirrored striping, number plates and route-style markings. Printed on a light blue backing sheet, the graphics are arranged for body sections, accessory areas and dashboard placement, so the completed model can carry the layered look of a classic American-style tractor truck. Beyond the large side graphics, the sheet includes KING HAULER name markings, permit-style labels, fuel markings and instrument panel graphics with dials and switch details. Two yellow Nevada-style plates marked 928627 and two blue California-style plates marked 1H55793 are shown on the sheet, alongside smaller transport and registration markings such as HF 15389, MC 39311 and ICC MC 56301. These smaller printed elements help break up large body surfaces and add scale character to close-range viewing. During a restoration, replacement or fresh body finish, the sheet supports accurate re-creation of the original 56301 appearance. It also suits a careful display build, where the dashboard graphic, cab-side striping and owner-operator style markings give the truck a more complete finished presence. Warning! Not suitable for children under 14 years.
Basic accessories
KK Parts Storage Box Doors Ladder Model Parts
319115559€24.39
This KK Parts Storage Box Doors Ladder set provides the molded components shown for 56371 in a dark gray sprue layout that keeps each section clearly arranged before removal. The frame carries large rectangular panels, long narrow strips, ladder-like sections and small bracket-style parts, giving the assembly a defined mix of broad surfaces and smaller connection points. Three main panel pieces feature circular openings near one edge, a detail that shapes the look and fit of the Storage Box Doors Ladder section for this specification. Molded identifiers such as K1, 2, 3, 4, 5, 8 and 9 are visible on the frame, helping distinguish the individual parts during preparation and assembly. The lower area of the sprue holds 2 ladder-like frame pieces, while the upper area includes 6 ring-shaped connector or bracket parts with side tabs or mounting points. The long strip elements on the right side add further structural sections to the same assembly group. As a parts-focused model component set, this sprue suits repair work, replacement needs or a build that requires the exact Storage Box Doors Ladder pieces for 56371. The organized frame layout supports careful cutting, sorting and test fitting at the workbench, especially when matching specific molded sections to an existing model project.
Basic accessories
Knight Hauler H-Parts, model accessory set
300005941€9.49
This H-Parts set is made for the Knight Hauler 56314 and focuses on the cab spoiler area, supplying the shaped replacement sections needed when that specific truck build calls for fresh exterior parts. The set contains 1 H-parts sprue with 5 molded pieces, presented unassembled for fitting into the matching model. The molded sections are arranged on a sprue frame, which keeps the individual pieces together until the build reaches the spoiler stage. The visible parts include curved and flat forms with mounting points that suit exterior body assembly, making the set useful for repair work, restoration, or a clean rebuild of the upper cab section. Because the set is tied to 56314, the part selection stays specific to the Knight Hauler rather than serving as a generic truck assortment. On the workbench, this accessory set supports careful replacement of worn, missing, or unfinished spoiler sections while keeping the truck's appearance aligned with the intended body layout. It also fits neatly into a spare-parts stock for model builders maintaining an existing Knight Hauler over time. Warning! Not suitable for children under 14 years.
Basic accessories
Knight Hauler T-Parts Windows Model Accessory
309225074€15.79
This accessory set provides clear T-Parts windows for the Knight Hauler and focuses on one of the most visible stages of a truck model finish: the cab glazing. The molded transparent sections are supplied on a single sprue, so the different shapes stay grouped together until fitting begins and each section can be matched to its position during the build. The set contains several distinct window forms, including a large curved screen, angular side panels, rounded rectangular sections and a larger rectangular panel. That mix of shapes points to coverage across multiple visible cab openings rather than a single insert. The clear material keeps painted bodywork and interior details visible once installed, which matters on a display model where the cab area draws attention from several angles. Because the parts are molded as dedicated window pieces, they support a neater finish than improvised sheet material and keep the outlines consistent with the intended body shape. On the bench, this kind of parts set suits a fresh build, a careful rebuild or the replacement of marked glazing on an existing Knight Hauler model. It also helps when a project calls for clean, uniform transparent sections before final body assembly and detailing. Warning! Not suitable for children under 14 years.
Basic accessories
L-Parts Dashboard/Seat, model parts for 56318
309115181€22.49
L-Parts Dashboard/Seat for 56318 supplies a dedicated interior parts frame for a compatible model build. The white injection-moulded sprue groups the main cabin pieces in one place, including seat forms, a dashboard section, a steering wheel and several smaller structural elements visible on the frame. This makes the set useful when an original interior section is missing, damaged or still unfinished within the matching 56318 assembly. The parts remain attached to the frame for clear handling before removal, which helps keep the individual shapes easy to sort and identify during the build process. The focus here is the vehicle interior rather than exterior bodywork, so the set supports the cabin area with components shaped for seating and control detail. The moulded surfaces and defined edges suit trimming, test fitting and finishing as part of a precise replacement or continuation build. Because this is a parts set for 56318, the emphasis stays on compatibility with that specific model reference. On the workbench, the sprue can be used to replace worn interior pieces or to complete a paused project that needs the correct dashboard and seat section. It also suits careful stock keeping for model maintenance, where dedicated replacement frames help keep a long-term build accurate to its intended configuration. Warning! Not suitable for children under 14 years.
Basic accessories
L-Parts Interior MAN TGX 56325, model parts set
319115278€16.79
This L-Parts Interior set for MAN TGX 56325 brings key cabin details into the build with a single injection-moulded sprue carrying white interior components. Seat-shaped parts, a circular steering wheel, curved trim pieces and smaller support elements give the cabin area the defined shapes that stand out through windows and open viewing angles. The frame layout keeps the parts connected and easy to identify before removal, which helps maintain order during trimming, test fitting and finishing. The white moulding provides a neutral base for primer and paint, making it suitable for custom colour work that matches the rest of the truck model. Smaller connector and support pieces contribute to the interior structure rather than acting as loose decorative extras, so the set supports both fit and appearance within the cabin section. On the bench, this parts set suits careful assembly sessions focused on interior detailing and paint preparation. Once fitted into the MAN TGX 56325, the shaped cabin elements help the model read more convincingly in close-up views, especially where seating, steering and inner trim are part of the finished presentation. Warning! Not suitable for children under 14 years.
Basic accessories
Leaf Spring, model spare part, 2-piece set
309805460€16.49
This leaf spring set supplies 2 replacement parts for model 56301 and focuses on one clearly defined maintenance task: restoring the specified spring components with the correct designated spare set. The pair format matches the naming in the set, so both corresponding parts are available together for repair or parts replacement. Each piece is formed as a curved leaf spring with curled ends and a central fastening point. The black finish makes the parts easy to distinguish from surrounding hardware during workshop handling, while the matching shape of both pieces supports consistent placement where the model calls for this spring type. As a model spare part, the set is suited to keeping an existing build complete with the named replacement components rather than substituting a different part type. The set fits maintenance work on model 56301, whether worn parts are being exchanged or a stored build is being returned to running condition with the correct spring pieces. Kept alongside other workshop spares, the 2 matching leaf springs provide a direct reference to the designation printed for this replacement set. Warning! Not suitable for children under 14 years.
Basic accessories
Leaf Spring, spare part for 56305, 2-piece set
309805522€25.99
This leaf spring set for 56305 supplies 2 matching replacement parts for a model assembly that uses a paired spring layout. The curved strip shape, central metal insert and mounting holes point to a component made to sit in a defined fixing position, where alignment and matching geometry matter for the surrounding structure. Each piece is formed as a long black arc with the same profile across the pair, making the set suitable where both sides of the relevant assembly need the same part. The central insert creates a reinforced fastening point, while the adjacent holes provide the connection positions required by the 56305 configuration. As a spare part, the set is focused on keeping an existing build complete rather than changing its specification. That makes it useful for repair after wear, for replacing a missing component, or for returning a stored model to running or display condition with the correct paired hardware. The 2-piece format suits workshop drawers, parts boxes and ongoing maintenance setups where model-specific components need to stay ready for later service. For collectors and builders maintaining 56305, this set adds the exact component type named in the designation, with no need to adapt a generic strip or bracket to fit the original mounting points. Warning! Not suitable for children under 14 years.
Basic accessories
LED Mount Set for MAN TGX RC Truck Model
319225121€13.99
The T-Parts LED-Mounts MAN TGX 56325 add model-specific lighting support to a truck build with a set of black molded parts arranged on a sprue. Designed for the MAN TGX 56325, these components create defined mounting points for LED installation and help keep the lighting layout aligned with the structure of the model. The set consists of unassembled accessory parts rather than electronic lighting units, so the focus stays on fit and placement within the build. Visible components include clip-shaped connectors, bracket-like pieces, a ring part, a flat plate with 2 round holes, cylindrical parts with side openings and a larger curved housing-style section. This mix gives the builder several dedicated forms for positioning and securing lighting elements where the truck body needs them. The black finish blends naturally into technical areas of the model and keeps the attention on the vehicle lines once assembled. Used during a MAN TGX build or upgrade, these parts support a tidier custom lighting installation than improvised mounting solutions. They suit builders refining a display truck, updating an existing chassis project or preparing a more detailed road-going RC lorry with added light positions. Warning! Not suitable for children under 14 years.
Basic accessories
LEO2A6 B Parts Set, model accessory for 56020
300005977€23.79
This B parts set is made for the Tamiya LEO2A6 56020 and concentrates on the running gear area, with suspension arm and track roller components arranged on a single molded runner. The 43-piece layout gives builders the exact sprue group needed when a specific section of the model calls for replacement rather than a full new kit. The set is supplied as 1x B parts and matches the designation used for the original build, which helps when checking assembly steps and locating the correct section for repair work. The dark olive green molded frame shown in the product image keeps the parts together until removal, with numbered attachment points that support clear identification during preparation. Circular wheel-related pieces, arm-shaped elements and smaller mechanical connectors are grouped within the runner structure for organized handling at the workbench. This accessory suits restoration of an existing LEO2A6 56020 build, replacement of damaged running gear pieces, or storage as a dedicated spare sprue for later maintenance. It also fits hobby setups where a single suspension section needs attention and the rest of the model remains in service, avoiding the need to source a complete duplicate kit for one component area. Warning! Not suitable for children under 14 years.
Basic accessories
Leopard H-Parts Clear Parts Set for Model Kit
309115143€21.29
The Leopard H-Parts clear set supplies transparent molded components for a model build that depends on crisp see-through detail. The main sprue carries multiple individually formed clear pieces, and the separate cylindrical part adds another dedicated element for restoring or completing the intended exterior finish. The clear runner shows numbered positions that help keep each section identifiable before removal, which matters when several small parts with different shapes are used across one vehicle build. Round discs, angled panels, curved sections and textured inserts point to a mix of detail functions within the same set, all molded in transparent material to preserve light-passing surfaces and visible contours. This format also keeps the parts together until the relevant assembly step, reducing mix-ups while handling fine components at the workbench. Used as a replacement set, these H-Parts can help bring a Leopard model back to its specified appearance after loss, damage or wear to the original clear sections. They also suit careful rebuilds where clean glazing and lens detail make a visible difference across the finished model. The set is aimed at hobby assembly work and fits naturally into repair, restoration and completion tasks for the matching Leopard build. Warning! Not suitable for children under 14 years.
Basic accessories
Leopard P-Parts Fitting Parts, model spare parts
309115144€40.49
Leopard P-Parts Fitting Parts is a spare parts set for Leopard 56020, created for model maintenance, repair and rebuild work. The dark olive-green runner carries multiple molded components still attached to the sprue, so the required sections can be identified before removal and fitted where replacement is needed. Visible shapes include long rods, curved frame elements, rectangular panels, bracket pieces, hook-shaped parts and cross-braced supports, all formed to match the intended assembly area. Molded part numbers appear beside the individual pieces on the frame, adding a practical reference during sorting and installation. The set is not a complete model kit; it is a dedicated source of replacement sections for an existing Leopard 56020 build. The range of shapes on the sprue supports work on structural areas, fitted details and panel sections, which is useful when restoring an older build or replacing damaged components. The molded finish and attached layout also help keep small parts organized until the exact piece is needed. On the workbench, this spare sprue suits careful rebuilds, part swaps and repair sessions where a matching component matters more than improvisation. It also supports collectors maintaining a finished Leopard 56020 model with original-style replacement parts rather than mixed substitutes. Warning! Not suitable for children under 14 years.
Basic accessories
Light Bar Roof/Bumper Parts, Model Accessory Set
319000847€32.99
This model accessory set supplies EE/CC roof and bumper parts for detail-focused vehicle builds, with chrome-plated components that bring a bright metallic finish to visible exterior sections. The sprue layout keeps each piece organised during preparation and helps identify the required part before cutting, test fitting and final installation. The set is centred on shaped trim elements for the upper body and bumper area rather than a complete vehicle, making it useful when a build needs replacement exterior pieces or a more defined finished appearance. The visible runner carries a mix of long curved bars, ring-shaped parts, narrow strips and smaller formed details, giving the builder several distinct components to place across the bodywork. The chrome surface suits display-oriented finishing where reflective accents matter, and the separate parts format supports careful painting, fitting and alignment around surrounding body sections. As a dedicated model supply, it fits naturally into workshop stock for ongoing maintenance or customisation work. On the bench, the parts can be sorted directly from the marked sprue and matched to the relevant mounting points during a repair or fresh build. In a completed display model, the fitted bars and trim pieces help define the roofline and bumper zones with sharper visual contrast against the main body colour. Warning! Not suitable for children under 14 years.
Basic accessories
Lightcases Mirror S770, model parts set
319115540€16.79
Lightcases Mirror S770 brings together small exterior detail parts for vehicle model building, with chrome-plated pieces that give lamp surrounds, mirror sections and trim areas a bright metallic finish on the completed build. The sprue layout shows numbered components arranged for assembly work, including matched left and right shapes that support accurate placement on both sides of the body. Among the visible parts are curved trim sections, lamp housings, larger light cluster elements, thin vertical reflector-style strips and several panel-like inserts in different shapes. Small round inserts add another layer of detail where light assemblies need separate internal pieces rather than a single molded surface. Keeping the components on the runner until use helps sort each numbered section before removal and fitting. The reflective coating also sets these pieces apart visually from painted body panels and other non-plated areas. This set suits builders working on a vehicle model that uses the S770 detail layout and who want defined exterior finishing around lights, mirrors and trim. During assembly, the mirrored pairs and numbered identification points make it easier to match each piece to its position and keep the body detailing balanced across the finished model. Warning! Not suitable for children under 14 years.
Basic accessories
M Parts Highroof w/ Spoiler S770, model parts
319115550€26.49
M Parts Highroof w/ Spoiler S770 focuses on the upper body area of a scale vehicle shell, supplying molded replacement sections that restore the high roof profile and spoiler form with clean, defined contours. The set is shown as white model parts on a sprue, a format that keeps the pieces grouped and easy to sort before cutting, trimming and surface preparation. A technical parts diagram identifies 3 separate sections and shows how they relate to the main body shell, which helps when checking orientation and placement during a repair or rebuild. The main cab shell carries molded door and roof detail, while the additional panels extend the body shape with matching lines across the upper structure. This makes the set useful not only for replacing worn sections, but also for rebuilding a shell that needs the correct roof height and rear profile. The unpainted finish leaves the surface ready for sanding, priming and colour work to match the rest of the model. On the bench, these parts fit naturally into restoration, spare-parts replacement or a fresh body project where accurate panel shapes matter. During test fitting and final finishing, the grouped sprue layout and numbered diagram help keep each section organised and ready for the next build step. Warning! Not suitable for children under 14 years.
Basic accessories
M Parts Radiator Grille, model spare part set
319115370€19.79
This M Parts Radiator Grille set is a dedicated model spare part for the M-B Actros 56335, focused on the front body area where grille and trim sections define the truck's character. The white moulded pieces are supplied on a single sprue, so the matching components stay grouped together before removal and fitting. The runner carries multiple shaped sections, including tall side panels, curved trim pieces and perforated grille-style parts that build up the front fascia in layers. A large circular opening in the upper grille section forms a clear central mounting point within the front assembly. Because the parts are unassembled, each piece can be prepared, trimmed and aligned to the surrounding bodywork during the build or while replacing worn sections on an existing model. This makes the set useful both for planned assembly stages and for restoring a model that needs the correct front-end parts again. On the bench, the sprue format helps keep the individual sections organised until the moment they are needed. During fitting, the shaped contours and grille openings contribute to the defined look expected from a scale truck front, whether the goal is completing the original bodywork or refreshing a used build with the proper M Parts section. Warning! Not suitable for children under 14 years.
Basic accessories
M Parts Roof MB Arocs, model body parts set
319115456€23.49
M Parts Roof MB Arocs brings the key upper-cab shapes for a truck model build into one focused parts set, with a molded roof section, a large cab shell and matching grille elements that define the front view. The white components show recessed panel lines and a clear window opening, giving a solid base for careful preparation, painting and final body finishing. The parts layout shown for 56352 centers on exterior cab details rather than mechanical assemblies, so the work stays focused on fit, surface treatment and visible body contours. Separate grille sections include the central star-marked insert and curved trim pieces that build up the fascia in layers. That arrangement helps builders handle each section individually during cleanup and alignment. The molded shell format also makes this set useful when an existing truck model needs a fresh upper cab section instead of a complete rebuild. On the bench, these pieces suit repair work, restoration of a used build or the next stage of a detailed truck project with MB Arocs bodywork. Once trimmed and finished, the roof, front opening and grille shapes give the cab its recognizable road-going character in display or scale transport scenes. Warning! Not suitable for children under 14 years.
Basic accessories
M-B Actros window parts set, model accessory
319115372€20.49
This accessory set supplies the clear window and sun shield sections for the M-B Actros 56335, making it a practical choice when a model cab needs replacement glazing or fresh transparent trim. The transparent mouldings are presented as injection-formed parts on sprues, with each section kept in place until cutting and fitting begin. The layout shown for this set includes multiple clear panels in different sizes, with larger screen pieces alongside smaller window sections shaped for the cab. That format helps identify each part before removal and supports a more orderly build process when several transparent elements need to be prepared at once. Because these are dedicated S Parts, the set concentrates on the glazing-specific sections rather than general body hardware, which keeps the scope focused on visible cab details. During assembly, clear parts like these are used where the model needs defined window openings, screen areas and a sun shield section that matches the vehicle form. The set suits repair work on an existing build, completion of an unfinished project, or replacement of worn transparent sections where the cab finish needs a cleaner look again. Warning! Not suitable for children under 14 years.
Basic accessories
M-Parts Radiator Grille Deflector Model Parts
319115279€18.99
M-Parts Radiator Grille Deflector 56325 brings body detailing and replacement potential to a compatible scale model build. The set consists of white injection-molded parts supplied on a sprue, with grille-style and deflector-shaped sections that support a clean, defined exterior finish once trimmed and fitted into place. The runner layout keeps the individual sections connected until preparation begins, which helps with part identification and handling at the workbench. Larger body-related pieces and smaller detail elements are molded together, allowing the builder to check placement, compare shapes and plan the fitting sequence before assembly. As a parts set rather than a complete vehicle kit, this reference is suited to repair tasks, restoration work or replacing worn or missing exterior sections on an existing model. The molded surfaces and openings also make it useful where a build calls for more accurate front-end or airflow-related body detail. On the bench, the set fits naturally into projects that involve body refurbishment, parts replacement or careful finishing of a compatible model. It also suits stored spare-part collections where keeping a dedicated grille and deflector reference on hand can simplify later maintenance or rebuild work. Warning! Not suitable for children under 14 years.
Basic accessories
Machine Gun with Mount, plastic model parts
319225067€11.29
This plastic parts set adds a machine gun and mount assembly to selected military model builds, with V/W parts shaped for use with references 56014, 56016 and 56032. The olive-drab sprue presents the components in an organized runner layout, so the weapon station can be prepared as a focused subassembly within a larger vehicle project. The frame holds multiple molded pieces for the gun, bracketry and support structure, allowing careful removal, cleanup and test fitting before final placement. Because the set is supplied as detail parts rather than a complete vehicle kit, it suits restoration work on an unfinished build as well as added surface detail on a compatible model. The molded colour provides a practical starting point for military paint schemes, while the separate parts support precise brush painting across smaller mechanical sections and edges. On the workbench, the compact sprue format keeps the assembly stage clear and easy to manage. In a display scene, the finished gun mount can sharpen the look of an open vehicle interior, a service position or a maintenance setup where visible equipment adds scale character without overwhelming the main build. Warning! Not suitable for children under 14 years.
Basic accessories
Main Plate P Parts for MB Arocs Model Kit
319115458€12.79
This P Parts Main Plate set for the MB Arocs 56352 model kit provides the core plate sections needed when an original build needs replacement structural pieces. The black injection-molded sprue carries multiple unassembled components in one frame, with broad panel shapes, molded openings and raised mounting forms that reflect their role inside the larger assembly. Alongside the two larger plate sections, the runner also holds a long narrow panel and a textured rectangular section that appears suited to a floor, platform or internal support area. The molded connection bars keep the parts organized until removal, while the visible hole pattern and cylindrical posts indicate fixed attachment and alignment positions during assembly. This makes the set useful when restoring a previously built model, replacing damaged sections, or completing a kit that is missing specific structural parts. In a hobby workspace, the sprue format allows each component to be checked against the build stage before cutting and fitting. The matched part geometry helps maintain the intended layout of the MB Arocs 56352 assembly, whether the task is a careful repair or a clean rebuild of the main plate area. Warning! Not suitable for children under 14 years.
Basic accessories
MAN TGX 18.540 Ver.II sticker set, model decals
319495822€20.49
The MAN TGX 18.540 Ver.II sticker set brings finishing detail to a scale truck build with printed markings for the cab exterior, interior and equipment areas. MAN branding, TGX 18.540 model badges, large logo graphics and trim elements help the completed body capture the look of a working road tractor with sharper visual definition across multiple sections. Beyond the main body graphics, the sheet adds smaller details that change how close-up views read. Dashboard and console prints give the cab a more developed cockpit appearance, while letter and number sets allow custom registration combinations. Country code markings extend the range of regional styling options, and caution labels such as HOT! MOTOR, ROTATING PARTS and ON/OFF labels add workshop-style and operating detail where the build calls for it. Reflective boards, warning triangles and textured strip graphics support realistic finishing on rear and step areas. Applied during the final detailing stage, the sheet suits builders who want cleaner visual transitions between painted surfaces and printed markings. It works especially well when the truck is viewed at cab level, parked in a scale yard scene or photographed from close range, where dashboard graphics, badges and safety markings become part of the overall realism. Warning! Not suitable for children under 14 years.
Basic accessories
MAN TGX 2-Axle Frame L/R, model spare part
314005101€48.99
This spare part is the 2-Axle Frame L/R for the MAN TGX 56329 and is intended for restoring the chassis structure of that specific truck model. The set provides the left and right frame sections, giving a direct replacement for the main longitudinal rails that carry the layout of a 2-axle configuration. Each rail is formed as a long black metal section with a series of evenly spaced round holes and additional countersunk screw points. That hole pattern supports accurate positioning of attached components and helps maintain the mounting geometry required by the original build. As a structural chassis element, the frame section is suited to repair work after wear, damage or part loss, where keeping the correct fit across the truck platform matters. In workshop use, this type of replacement part helps return a MAN TGX 56329 model to running or display condition with the intended frame arrangement in place. It fits naturally into maintenance, rebuild and parts replacement tasks where the existing chassis rails need to be exchanged for the matching left and right sections. Warning! Not suitable for children under 14 years.
Basic accessories
MAN TGX H-Parts, model spare parts set
319000246€17.49
This H-Parts set for the MAN TGX provides replacement body sections for a scale truck build, centred on the side skirt and bumper area shown on a single white sprue. The moulded pieces are intended to be removed from the frame, prepared and fitted where lower exterior cab parts need renewal or completion. The sprue carries long side sections, a front body piece with large window openings, curved trim elements and smaller rectangular mounting parts. That layout keeps related exterior components grouped in one set and supports a clean match across the lower cab lines. The parts arrive unpainted, so the finish can be aligned with an existing build, a repair project or a fresh body shell treatment. As model supplies, these components serve the visual structure of the truck body rather than the drivetrain or chassis hardware. On the bench, the set suits restoration work on a used MAN TGX shell, replacement of damaged trim pieces, or completion of a build that needs the correct H-Parts group. The white moulding also makes surface preparation, test placement and paint planning easier before the final fit on the cab. Warning! Not suitable for children under 14 years.
Basic accessories
MAN TGX Headlamp Glasses, model spare parts
319005967€10.99
This AA-Parts set provides clear replacement parts for the MAN TGX 56325 and focuses on the glazing elements that define the front-end finish of the truck model. The transparent molded pieces are suited to repair work, completion of an unfinished build, or the refresh of worn light covers where clarity and fit matter to the final appearance. The parts come on a single clear sprue, with multiple molded sections arranged for identification before removal. Visible numbering on the runner marks individual pieces from 1 to 9, and molded identifiers including Y8-2 and A1 appear on the frame. Alongside the headlamp glasses, the sprue also carries additional transparent sections that support accurate restoration of the model's clear exterior details. The molded format keeps each piece protected and easy to inspect before cutting and fitting. On the bench, this set suits careful replacement of damaged glazing or completion of a MAN TGX body that is missing its clear sections. It also works for builders who want to keep a finished truck model visually consistent after wear, handling, or part loss during long-term use. Warning! Not suitable for children under 14 years.
Basic accessories
MAN TGX mirror and taillight parts, model accessory
319115280€19.99
This R-Parts set for the MAN TGX 56325 focuses on two visible truck details: mirrors and taillights. As separate model accessory components, these parts help restore crisp exterior definition on a build where small fittings shape the overall impression of the cab and rear bodywork. The set is supplied as black injection-moulded components on a sprue, with the individual pieces held in place until removal and finishing. That format supports careful cutting, test fitting and paint preparation during workshop sessions. The image shows multiple attached parts within a rectangular frame, including paired detail pieces and shaped sections that match the technical character of a truck model build. For ongoing projects, replacement work or a refresh of used assemblies, this kind of parts set keeps the focus on exact fit and consistent appearance. On the bench, the mirror and taillight elements can be prepared alongside body finishing and other exterior detailing steps, then integrated where the build needs renewed definition. The set suits model work that values accurate small-scale fittings rather than broad cosmetic changes, especially on a MAN TGX 56325 build where these visible components complete the final look. Warning! Not suitable for children under 14 years.
Basic accessories
MAN TGX rear fender parts, model spare sprue
319225122€26.99
These Y-parts provide a dedicated rear fender replacement for the MAN TGX model and focus on restoring a specific section of the bodywork rather than replacing a full assembly. The black injection-molded sprue presents the parts in a single frame, with curved and flat sections arranged for identification before removal. Visible molded numbers such as 12, 16 and 18 mark individual positions on the runner and help distinguish the separate components during the build process. The glossy black finish suits exterior areas where a consistent surface matters, while the molded shapes indicate wheel-arch style covers, panel sections and mounting areas with round holes. This makes the sprue useful when an existing rear section is damaged, incomplete or missing and a matching replacement is needed for the MAN TGX model. On the workbench, the frame gives a clear overview of the included shapes before cutting and fitting begins. It suits repair work, parts replacement and ongoing maintenance of a MAN TGX build where the rear fender area needs the correct molded section rather than a generic panel. Warning! Not suitable for children under 14 years.
Basic accessories
MAN TGX Roof Spoiler Side, model parts set
319005966€12.29
This CC-Parts set supplies the roof spoiler side sections for the MAN TGX and focuses on one specific exterior area of the truck body. The white moulded parts are arranged on a sprue, with left and right pieces laid out as a matched pair for a consistent fit and finish across both sides of the cab. The curved panel shapes support accurate restoration when original spoiler sections are damaged, missing or no longer match the rest of the build. As separate body components rather than a full cab assembly, these parts let builders target one repair zone without replacing larger surrounding sections. The sprue format keeps the pieces together before removal and makes each section easy to identify during preparation. The smooth moulded surfaces also provide a clean base for trimming, test fitting and finishing work within a scale truck project. On a workshop table, the set fits naturally into maintenance, rebuild and detailing sessions for the MAN TGX. It also suits shelf models that need the roofline completed with the correct side elements after wear, breakage or a long-term restoration project. Warning! Not suitable for children under 14 years.
Basic accessories
MAN TGX Roof w/Spoiler, model parts
319005973€20.99
This set supplies roof and spoiler body parts for the MAN TGX 56325, giving a truck model the upper cab section that defines its finished outline. The unpainted white components are injection-moulded and remain attached to sprues, making them suitable for replacement work, restoration, or a fresh build that needs the correct cab top pieces. The larger section shows a curved panel shape with moulded contour lines, several mounting holes, and a square opening formed directly into the part. A second angular section adds the spoiler form, with a large rectangular opening that supports accurate placement on the matching model. Because the surfaces are supplied unpainted, the parts can be prepared and finished to suit an existing colour scheme or a new livery. The moulded detailing gives a clear base for careful trimming, test fitting, and paint preparation. On the bench, these parts help complete a damaged truck shell or return a display model to its intended appearance. In a new project, the roof profile and spoiler shape bring the MAN TGX bodywork closer to the full cab look expected from a scale truck build. Warning! Not suitable for children under 14 years.
Basic accessories
MAN TGX Ver.II parts set, model accessory trim
319115390€14.29
This MAN TGX Ver.II parts set brings chrome-plated finishing detail to a scale truck build with a runner of molded exterior pieces that stand out through a bright reflective surface. Rectangular trim sections, ring-shaped parts and narrow strip elements give the model more defined visual separation around selected body areas, helping the finished vehicle read with sharper contrast under light. The runner format keeps each component attached until the build reaches the detailing stage, which supports controlled removal and placement of small parts. The visible assortment of larger frame-like pieces, paired inserts and slim linear sections suits decorative zones such as lamp surrounds, grille accents, mirror-area trim or other exterior highlights where plated surfaces are part of the look. Because the set is focused on brightwork rather than structural parts, it adds finishing character without changing the underlying form of the model. On the bench, these plated pieces fit naturally into the later paint and detailing steps of a MAN TGX Ver.II project, when body colour, trim contrast and surface definition come together. Under display lighting, the reflective finish helps edges, openings and framed sections stand out more clearly across the truck's exterior. Warning! Not suitable for children under 14 years.
Basic accessories
MAN TGX Ver.II S Parts, model parts set
319115391€13.79
This S Parts set for MAN TGX Ver.II supplies a dedicated group of clear molded components for model work that depends on crisp transparent sections and a clean, accurate fit. The sprue layout shows several panel shapes, including large rectangular pieces, matching curved window-style sections, smaller rectangular inserts and long narrow side pieces, all formed in transparent material for glazing and visible body areas. Because the parts remain attached to the runner before removal, each section stays organized during preparation and part identification. That structure helps when comparing shapes, planning the build sequence and checking placement against the corresponding openings on the model. The different panel sizes support several positions across the vehicle body, rather than repeating one single shape, which is useful when restoring a worn build or replacing a missing clear section. On the bench, this set fits naturally into careful trimming, dry fitting and final installation with the rest of a MAN TGX Ver.II project. It also works well as a spare clear-parts source kept alongside an ongoing truck model build, ready for repairs after handling, transport or repainting. Warning! Not suitable for children under 14 years.
Basic accessories
MAN TGX Windows Set, model spare glazing parts
319115281€16.79
The MAN TGX Windows Set supplies the clear glazing parts needed for cab detailing, repair work or replacement on the named model. Transparent molded sections on sprues provide the distinct window shapes that define the truck's front and side openings, helping restore a clean, complete look where original parts are missing, marked or damaged. Visible in the set are several separate clear components, including a large front screen section, larger side window panels, smaller rectangular inserts and long curved pieces for additional transparent exterior sections. As S-Parts, these pieces are suited to targeted replacement rather than a full rebuild, making them useful when a finished truck needs fresh glazing or when a build requires the original clear sections again. The injection-molded format keeps each part grouped on runners until use, which helps identify the different shapes before removal and fitting. On the workbench, the set supports careful restoration of a MAN TGX cab with the transparent elements that give the model its defined window layout. It also fits stash planning for future maintenance, where spare glazing can be kept ready for later repair or completion of an unfinished truck model. Warning! Not suitable for children under 14 years.
Basic accessories
MB Actros 56335, clear red parts, model accessory
319000499€10.99
This accessory set for the MB Actros 56335 supplies clear red moulded parts on a single sprue, giving restoration work and replacement jobs the exact colour tone needed for visible trim, lens-style sections or other translucent details. The glossy finish and unused runner layout make the parts easy to inspect before clipping, so each section can be matched to the intended position during assembly. The frame holds several separate shapes, including longer curved sections with rounded openings and additional rectangular pieces connected by small gates. That layout helps keep the parts stable and clearly arranged until preparation begins. Because the parts arrive uncut, builders can plan trimming, test placement and surface finishing in a controlled sequence rather than sorting loose pieces. The clear red material also interacts with light differently from opaque mouldings, which matters on display models where colour depth and transparency are part of the finished appearance. This set suits repair work on an existing MB Actros 56335 as well as careful completion of a build that needs the correct red detail parts. On the bench, the organised sprue format supports clean handling during cutting and fitting. In a display cabinet, the translucent red accents help restore the intended visual contrast across the completed model. Warning! Not suitable for children under 14 years.
Basic accessories
MB Actros air intake T parts, model accessory
319225143€21.99
This T parts set for the MB Actros 56335 focuses on the air intake and engine area, supplying a clearly defined group of molded components for truck model assembly. The black runner presents the parts in one organized frame, with curved duct sections, vent-style elements and smaller mounting pieces that shape the mechanical character of this section. Several forms stand out in the layout: a long curved intake duct, a shorter curved tube section, a grille-like piece, rectangular panel elements and cylindrical socket-style parts. The sprue also shows molded position numbers including 2, 3, 4, 5, 6, 9, 16, 17, 18 and 19, which helps distinguish the individual pieces during the build. A central block-like part with 4 circular openings adds another distinct engine-bay detail, while smaller clamp-like connectors extend the range of attachment points and finishing touches. Used in a truck model project, these parts help define the intake path and surrounding engine-area structure with more specific shapes than a generic component mix. The grouped layout suits replacement work, careful restoration of an existing build, or completion of a matching MB Actros assembly where the correct T parts are needed. Warning! Not suitable for children under 14 years.
Basic accessories
MB Actros body parts, model accessory set
319000501€33.99
This H Parts set for the MB Actros 56335 supplies the exterior body sections that shape the truck's visible profile, including bumper and side skirt components in white injection-molded material. The molded surfaces show panel detailing, openings and mounting areas that support a clean fit during body assembly and later finishing work. Because the parts arrive on sprues, each section stays organized until trimming begins, which helps when planning paint steps, checking orientation and test-fitting the larger shell pieces against the matching model. The set centers on bodywork rather than mechanical assemblies, so it suits repair jobs, replacement of worn exterior sections or continuation of a build that needs fresh visible panels. Smaller connector pieces are also present for joining and positioning the main sections. On the bench, the set supports careful preparation with cutting, cleanup and surface finishing before installation. Once fitted to the matching MB Actros 56335, the bumper and side sections restore the truck's outer lines and give the model a complete, defined road-going appearance. Warning! Not suitable for children under 14 years.
Basic accessories
MB Actros rear fender Y parts, model spare set
319225145€26.99
This spare parts set supplies the Y parts rear fender group for the MB Actros 56335, giving model builders the exact component family needed when a truck build calls for replacement body sections. The set contains 1 sprue with 11 pieces, all formed as matching black injection-molded parts for this specific model reference. The connected runner layout keeps the individual shapes organised before removal, which helps when checking each section against the build stage or replacing a damaged area. Visible in the set are curved fender elements and related mounting shapes from the same parts tree, so the repair stays focused on the correct section instead of drawing from a general-purpose box. As a model spare set rather than a full kit, this pack is aimed at maintenance, restoration and part-for-part exchange on the MB Actros 56335. On the workbench, the set supports clean replacement of worn or missing rear body sections while keeping the original build moving with matching components. It also suits stored builds that need a fresh fender assembly after handling damage or lost sprue parts during an earlier construction stage. Warning! Not suitable for children under 14 years.
Basic accessories
MB Arocs bumper parts, model spare set
319000958€15.99
This spare parts set supplies H parts for the bumper section of the MB Arocs / 56352, making it a focused replacement option for an existing model build. The white injection-molded pieces arrive on sprues and present the shapes as formed parts ready for trimming, test fitting and installation into the correct assembly position. Visible molded components include long curved bumper-like sections, a large cab-front body section with window openings, mirrored structural pieces, a flat rectangular panel with 4 holes and several small brackets and round cap-like parts. That mix supports precise restoration work when a front-end section needs replacement rather than a full rebuild. The sprue format also helps keep the smaller pieces organized until they are needed at the workbench. As a model supplies entry, this set is intended to replace designated components, not to serve as a complete vehicle kit. On the bench, the parts can be compared directly with the existing assembly to identify the correct mounting points and restore the front profile of the MB Arocs. For ongoing workshop stock, a dedicated bumper parts set also helps keep repairs targeted when only one area of the model needs attention. Warning! Not suitable for children under 14 years.
Basic accessories
Mercedes-Benz Actros Decal Sheet, Model Stickers
319495770€27.99
This decal sheet is made for the Mercedes-Benz Actros 1851 Gigaspace model and brings the finishing stage into sharp focus with printed markings for bodywork, cab details and functional labels. Large and small graphics work across exterior panels and interior surfaces, helping the truck take on the layered look of a road-going tractor unit rather than a plain shell. The sheet carries alphabet rows, number sets and regional plate identifiers for custom registration combinations, along with Mercedes-Benz and Actros markings, BLUETEC 5, BLUETEC 6 and BLUE EFFICIENCY POWER graphics. Instrument panel decals add gauge faces, control markings, speaker and vent textures, plus console details that give the cab more definition when viewed through the windows. Additional printed elements include TRUCK OF THE YEAR emblems, reflective-style rear panels, triangular warning reflectors and ON OFF labels for switch areas. Applied during the final detailing stage, these markings support a more complete scale finish on display shelves, workshop benches or during running sessions with the truck model. The mix of exterior branding, interior graphics and caution labels helps different areas of the build read clearly at both distance and close range. Warning! Not suitable for children under 14 years.
Basic accessories
Mercedes-Benz Arocs light cases, model parts
319115457€18.99
This N/W parts set for the Mercedes-Benz Arocs / 56352 focuses on light cases and plated detailing, with chrome-plated components supplied on sprues for clean integration into the truck model. The reflective silver finish suits visible exterior areas where lamp surrounds, trim elements and front-end accents shape the finished look. The runner layout shown for parts numbered 11, 12, 17, 18, 22, 23, 24, 25, 26 and 27 supports targeted replacement when specific sections are needed rather than a full rework of the model. Visible moulded elements include a Mercedes-Benz star emblem and several shaped detail pieces that match the visual language of the Arocs cab and front section. As model supplies rather than a complete truck kit, these components are suited to repair work, restoration of used builds, or completion of an unfinished project with matching plated parts. On the bench, the set supports careful fitting, painting plans around adjacent sections, and accurate finishing of display-focused truck builds. In a workshop setup or during a rebuild of the 56352 model, the plated surfaces help key visual points stand out once the vehicle is fully assembled. Warning! Not suitable for children under 14 years.
Basic accessories
Metal Parts Bag B, model accessory for 56310
309415579€41.99
Metal Parts Bag B is a model accessory specified for 56310 and gives a direct route to replacing matching metal components on that model. The clear Bag B designation helps identify the correct set within a structured parts system, which matters when a repair calls for the exact matching hardware rather than a general substitute. The focus here is straightforward compatibility with 56310. As a metal parts set, it suits maintenance tasks where original pieces are missing, worn or need to be exchanged with the correct matching components. The naming format keeps the reference precise, which is useful when sorting workshop supplies, planning repairs or restoring a model to its intended configuration. Because the data identifies this as Metal Parts Bag B, the copy stays with that exact designation and the stated model reference. On the bench, this accessory fits practical service scenarios such as replacing lost hardware during upkeep or preparing matching spare parts for later repair work on 56310. It also suits collectors and builders who keep designated replacement sets on hand for model maintenance and orderly parts management. Warning! Not suitable for children under 14 years.
Basic accessories
Metal Parts Bag C Scania 56323, model spare part
309400897€99.99
Metal Parts Bag C Scania 56323 is a dedicated model spare part for the Scania 56323 reference and gives restorations or repairs a clearly matched replacement option. The designation identifies the set as Bag C, which helps place it within the original parts structure when a specific section of the build needs attention. The stated metal construction matches the material named for this spare part and supports replacement work where the original assembly uses metal components. Rather than relying on general-purpose substitutes, the Scania 56323 reference keeps the selection tied to the intended model. That makes this spare part useful for correcting wear, replacing missing pieces or continuing an interrupted build with the proper reference in hand. On the workbench, a clearly named spare part shortens the search for the right replacement and keeps maintenance focused on the relevant model. For existing Scania 56323 builds, Metal Parts Bag C serves as a practical source for repair, upkeep or project completion when the matching original reference is required. Warning! Not suitable for children under 14 years.
Basic accessories
MetalPartsBag B, model accessory for 56306
309415259€21.49
MetalPartsBag B for 56306 is a dedicated model accessory for replacing matching metal components on an existing build. The clear designation links this set directly to 56306, which helps keep repair work focused on the correct parts group instead of mixing in general-purpose spares. The metal construction makes this set relevant where a build needs the specified replacement components rather than a broad assortment. As a named parts bag, it suits maintenance, restoration and the careful renewal of worn or missing pieces on a compatible model. This kind of dedicated supply is especially useful when an existing build is being kept in running condition or returned to a complete state with matching hardware. The concise format also keeps the scope clear: this is a targeted accessory set, not a general mixed spare box. On the workbench, MetalPartsBag B fits routine upkeep, planned repairs and the replacement of specific components on 56306. It also suits collectors and builders who maintain an existing model over time and need the correctly designated metal parts set for that purpose. Warning! Not suitable for children under 14 years.
Basic accessories
MetalPartsBag C, model accessory for 56306
309415260€66.99
MetalPartsBag C for 56306 is a model accessory set identified by a precise designation, making it a focused choice for builders who need the named metal parts pack rather than a general replacement assortment. The reference to 56306 keeps the application specific and helps align the pack with the intended model context. The data places this set in Models & Accessories and Models Supplies, which frames it as workshop stock for maintenance, restoration or completion work on an existing build. The metal construction named in the title points to a hardware-based component group rather than decals, body parts or electronics. Because the source data identifies the pack only as MetalPartsBag C for 56306, the copy stays with that verified scope and does not infer unlisted contents, dimensions or compatibility beyond the stated reference. This kind of clearly coded accessory pack suits bench organisation, planned repairs and replacing missing or worn parts during a rebuild. In a parts drawer, service box or ongoing model project, the exact MetalPartsBag C designation makes it easier to match the required pack to the correct 56306 reference. Warning! Not suitable for children under 14 years.
Electronic
MFC LED Red 1100mm, lighting accessory, 3mm
300056549€16.99
This MFC LED set adds red brake lamp lighting to longer truck models with a 1,100 mm lead and 2 fitted 3 mm LEDs. The extended cable length gives more room to route the harness through a truck frame, cab and rear section, where standard short leads may not reach cleanly. The set is designed for use with the MFC-01 and MFC-03 Multi-Function Control units, making it a focused lighting accessory for Tamiya truck builds that need extra cable reach. The 2 red LEDs sit on a single harness for paired rear lamp placement, and the ready-to-use connector keeps the electrical connection straightforward. Tag stickers are included to mark cable runs, which helps keep multiple light connections organised during installation. This LED cannot be used with the TLU-01 LED Light Unit. In a detailed truck build, the longer lead supports cleaner routing from the control unit to rear brake lamp positions, especially where the wiring passes through several sections of the chassis. The red 3 mm lamps suit rear lighting layouts that call for a compact bulb size and a clear brake lamp function.
Electronic
MFC LED White Cable Set 1100 mm for Truck Models
300056550€16.99
This LED cable set brings reverse lighting to longer truck models with a 1,100 mm lead and 2 white 3 mm LEDs. The extended cable run gives more freedom when routing lights through larger chassis layouts, making it easier to place the LEDs where rear lighting is needed while keeping the connection path practical. The set is designed for use with the MFC-01 and MFC-03 Multi-Function Control units and comes with ready-to-use connectors for direct installation. Tag stickers are included so each cable can be marked during setup, a useful detail when several connectors and wire runs need to stay clearly identified. The white LEDs are specified for reverse light use, which suits scale truck builds that aim for more complete lighting functions. These LEDs cannot be used with the TLU-01 LED Light Unit. In a workshop build, the long lead helps when the lighting path needs to pass through a cab, frame and rear section before reaching the control unit. Once installed, the white LEDs add a crisp rear light effect that fits display setups as well as powered truck operation with compatible MFC electronics.
Electronic
MFC LED Winker Front J21/22, model accessory
307175113€12.49
MFC LED Winker Front J21/22 is a dedicated model accessory for front indicator functions in compatible Tamiya electronics setups. The part combines a wired lead with a small connector assembly, making it suited to repair work or replacement when a matching front winker connection is needed on an existing model. The visible harness uses twisted yellow and green wiring and ends in a white multi-pin plug with metal contacts. A small transparent component sits near the connector, adding another defined electrical element to the assembly. This format helps keep the connection point clear during installation and supports accurate matching with the intended socket in a compatible system. As a spare part rather than a general-purpose cable, it is shaped around a specific role within model electronics. In workshop use, this kind of replacement part helps return a model to its intended light layout after wear, damage or loss of the original component. It fits naturally into maintenance tasks, parts sorting and electronics repairs where the correct front indicator lead matters for a clean, functional rebuild. Warning! Not suitable for children under 14 years.
Electronic
MFC LED Yellow Cable Set, 2 x 1100 mm, 3 mm
300056551€16.99
This LED cable set extends lighting reach for longer truck model installations with 2 pre-wired 1100 mm leads, each carrying a 3 mm yellow LED intended for turn-signal use. The longer cable length helps place lights farther from the control unit while keeping the wiring path more practical inside large-scale truck layouts. The set is designed for use with the MFC-01 and MFC-03 Multi-Function Control units and is supplied ready to use with fitted connectors. That direct connector format supports faster integration into an existing lighting system than loose LED components that need separate preparation. Yellow and purple cable colouring helps distinguish the lead type during setup, and the included tag stickers can be marked for connector identification to reduce wiring errors when several light circuits are installed together. These LEDs cannot be used with the TLU-01 LED Light Unit. In a detailed truck build, the longer leads suit front or rear indicator positions that sit well away from the control unit. During maintenance or later upgrades, the cable tags help keep the lighting layout readable when the body, chassis and light functions need to be checked again.
Electronic
MFC-01/03 Coupler Switch, model accessory for 56313
307325031€11.19
The MFC-01/03 Coupler Switch is a dedicated model accessory for 56313 and is supplied as 1 switch for a specific electrical task within a matching truck setup. Its compact harness and 2-pin connector point to a direct connection role where a coupler-based signal or power link is needed. The visible cable layout combines black and light green wires in a bundled lead, which helps distinguish the part during maintenance, comparison, or replacement work. The small white plug gives the connection end a clearly defined format for matching against the existing socket in the compatible installation. Because the provided data identifies this part specifically for MFC-01/03 and for 56313, the fit context stays precise rather than generic. The included contents are limited to 1 switch, keeping the scope clear for targeted servicing. This accessory suits repair, replacement, or parts preparation when an existing coupler switch on model 56313 needs to be exchanged. It also works well as a spare kept alongside other workshop components for planned maintenance on a compatible MFC-01/03-equipped build. Warning! Not suitable for children under 14 years.
Basic accessories
Mirror and Steps Parts Set for Model Truck
319115437€21.99
This parts set brings mirror and step details back into a truck model build with moulded black components arranged on a single sprue for clear handling at the workbench. The frame carries multiple exterior sections that support a tidy, consistent finish across the cab area, while the shaped pieces make it easier to match small fitted details during assembly or replacement work. Visible components include mirror housings, step sections, rails, plates and additional body-related parts, all presented unassembled for cutting, preparation and fitting. The moulded surfaces show vents, contours and mounting points that help identify orientation and placement before glue-up. Markings visible on the parts include Mercedes Benz and an R in a circle, adding model-specific detail to the set. The format suits both ongoing builds and targeted repairs where individual exterior sections need to be replaced rather than improvised. At the bench, the sprue layout helps keep small parts grouped until each section is needed, which supports orderly progress during trimming and test fitting. For restoration work, the set provides a direct way to refresh worn or missing cab details and return the model to a more complete appearance. Warning! Not suitable for children under 14 years.
Basic accessories
Mirror Step Parts Set for MB Arocs Model Truck
319115459€16.99
This parts set supplies mirror and step components for the MB Arocs and adds the exterior details that give a model truck cab its finished character. The black injection-molded frame presents the pieces in a clear overview, making it easy to identify the different shapes before they are removed and fitted into place. Alongside the mirror and step elements, the set also carries shaped trim sections, rectangular panel pieces and long narrow rail parts that expand the visible detailing around the cab area. Textured step surfaces and molded openings on the larger sections bring extra definition to areas that stand close to the viewer on a completed build. Because the components arrive on a single sprue, matching parts stay grouped together during preparation and painting. This set suits repair work on an existing MB Arocs build as well as the completion of a fresh assembly where small exterior fittings make the difference between a basic shell and a more resolved truck model. On the bench, the organized layout supports precise part selection; on the finished vehicle, the added fittings sharpen the look of the front and side sections. Warning! Not suitable for children under 14 years.
Basic accessories
N Parts for 56301, model spare part assembly
300115107€20.49
N Parts for 56301 is a model spare part assembly listed for the King Hauler 56301. The black moulded unit combines 2 rectangular panels with a central crossed support linkage, forming a connected structure that appears designed to mount, support or position adjoining sections within the model. The larger plate shows rounded corners, an X-rib underside and several cylindrical standoffs, all of which point to a part shaped for stable placement and defined spacing. Multiple mounting holes create clear fastening positions, while the smaller upper plate adds 2 screw holes, side tabs and raised mounting sections for alignment within the assembly. The linked centre section suggests controlled movement between the 2 panels rather than a fixed one-piece form, which can matter when replacing worn or damaged original parts on a detailed truck build. As a designated spare part for King Hauler 56301, this assembly suits repair work, restoration projects or the completion of an existing model that needs the correct matching component. The geometry shown in the moulding makes it suitable for builders who need the specified part form rather than a generic replacement. Warning! Not suitable for children under 14 years.
Basic accessories
N-Parts Lights for 56312, model kit spare parts
300115274€9.79
N-Parts Lights for 56312 adds small-scale exterior detailing with chrome-plated molded parts arranged on a single runner frame. The reflective finish suits lamp surrounds, trim sections and similar visual accents, giving 56312 a sharper, more complete appearance once the parts are cut free and fitted in place. The set is presented as spare or replacement parts rather than a full vehicle kit, making it useful when an existing build needs specific exterior pieces refreshed. The molded layout keeps each component attached to the frame until use, which helps with handling during storage and preparation. The polished surface brings a metallic look that would be difficult to match with plain untreated parts alone. As N-Parts for 56312, the set is tied to that specific model reference and is intended to support accurate restoration of its light-related detailing. On the workbench, the sprue format keeps the small components grouped together while planning the next assembly step. During a repair, rebuild or detail update, these parts can restore missing visual elements and return the model's front or rear lighting areas to a cleaner finished state. Warning! Not suitable for children under 14 years.
Basic accessories
N-Parts Reflector/Ra.Grille chrome, model spare parts
319115274€14.49
N-Parts Reflector/Ra.Grille chrome 56325 is a model spare parts set centered on plated exterior details for an automotive scale build. The sprue carries chrome-finished components that resemble reflector housings, radiator grille sections, trim surrounds and small round detail pieces, giving replacement work the same bright metallic look across the visible front-end areas. The frame also holds dark translucent inserts alongside the plated parts, useful where lens-like or window-like sections need a contrasting finish next to chrome trim. Visible part numbers on the sprue support part identification during assembly and help separate the individual sections before fitting. The image shows several shapes, including a large rectangular surround, long narrow trim pieces and paired lamp-area components, all molded as dedicated scale parts rather than generic craft pieces. This set suits repair, restoration or completion of a compatible model where original plated details are missing, damaged or being refreshed. On the bench, the grouped layout makes it easier to sort sections before cutting them from the frame and placing them into the bodywork with a consistent finish across the assembled vehicle. Warning! Not suitable for children under 14 years.
Basic accessories
P-Parts 58397, model parts set, clear yellow
309115196€14.79
P-Parts 58397 adds finely moulded clear and yellow components to a scale build, bringing sharper light detailing to the body with transparent and amber-tinted pieces. The set is arranged on sprues, making each part easy to identify before removal and placement during the build or repair process. The assortment of shapes supports several lamp positions on compatible vehicle models, with round pieces, rectangular sections and smaller auxiliary forms visible across the frames. Ribbed lens textures and smooth domed surfaces create different visual effects once fitted, helping headlamps, indicators or marker lights read more distinctly on the finished shell. The clear mouldings suit bright lens areas, while the yellow pieces support period-style or utility-vehicle lighting accents. As a replacement set, these parts can also refresh worn, missing or damaged exterior details on an earlier build. On the bench, the sprues give a clear overview of each moulded section before trimming and test fitting. During finishing work, the varied lens forms support careful matching to the intended vehicle look, whether the goal is a clean restoration or a more individual lighting layout on a compatible model. Warning! Not suitable for children under 14 years.
Basic accessories
P-Parts Dashboard, model accessory for M-B 56305
300115195€16.99
This P-Parts dashboard is a dedicated model accessory for M-B 56305, intended for cockpit-area replacement or restoration work. It gives existing builds a direct way to renew a worn, missing or incomplete dashboard section while keeping the focus on the specific interior area named in the part designation. As a spare component, it suits repair benches, rebuild projects and careful maintenance where the original dashboard detail needs to be replaced rather than improvised. The designation P-Parts identifies it as a defined replacement part rather than a general craft material, which helps keep restoration work aligned with the intended configuration of M-B 56305. That makes it useful for correcting damage, finishing an incomplete build or refreshing a model that has seen repeated handling. On the workbench, the dashboard part supports targeted interior work without shifting attention to unrelated sections of the model. It can be used when sorting replacement parts before a rebuild, during a cockpit refresh, or when bringing an older M-B 56305 back to a more complete presentation with the correct dashboard area in place. Warning! Not suitable for children under 14 years.
Basic accessories
P-Parts Fender Scania for 56318, spare parts
309115183€19.99
P-Parts Fender Scania for 56318 is a dedicated spare-parts set for a matching Tamiya truck model, centered on the fender area and related body sections. The black injection-molded pieces come attached to a sprue, making the individual shapes easy to identify before cutting, test fitting and installation on the intended build. The set shows several distinct component types, including large curved sections with ribbed shaping, flat rectangular panels, bracket-style connectors and round mounting posts. That mix supports repair work on both visible outer areas and the underlying attachment points that hold the parts in place. For an older build, missing or damaged fender sections can be replaced with matching molded parts instead of leaving gaps around the bodywork. For an unfinished project, the sprue provides the specific forms needed to continue work on the Scania body configuration used for 56318. On the bench, these parts fit naturally into restoration, maintenance and completion tasks where accurate replacement shapes matter. The molded surfaces and pre-formed contours help keep the truck build visually consistent, whether the goal is to return a used model to running condition or to finish a stored project with the correct fender components. Warning! Not suitable for children under 14 years.
Basic accessories
P.Shaft Long, model spare part for Hauler Aeromax
303555094€10.49
P.Shaft Long is a drivetrain spare part for Hauler and Aeromax model vehicles, built to reconnect rotating assemblies with a long shaft format and jointed end sections. The metal center section and fitted end pieces give this replacement part the defined shape needed where power has to pass through a moving mechanical link. Its layout is focused on function rather than decoration. Each end uses a ball-joint style connection with a cross pin, a format that supports fitment at the intended mounting points while allowing the shaft to work within the movement of the drivetrain. As a single replacement component, it suits repair work when an original shaft is bent, worn, or no longer transmitting rotation cleanly. The elongated form also makes it suitable for applications in the Hauler and Aeromax range where a longer drivetrain link is required than a standard short shaft. On the workbench, this spare part fits naturally into routine maintenance, rebuilds, or targeted drivetrain replacement. It can be kept on hand for service intervals, used to restore a non-running chassis, or installed during a parts refresh on a compatible truck build. Warning! Not suitable for children under 14 years.
Basic accessories
P.Shaft Short King Hauler model spare part
303555093€6.99
P.Shaft Short King Hauler for 56301 is a dedicated spare part for model maintenance and repair. The component shown in the data uses a black shaft with a slightly tapered centre section and rounded ball ends, creating a compact linkage form suited to mechanical connection points inside a compatible assembly. Each end carries a short metal pin set crosswise through the ball, forming a T-shaped peg arrangement that indicates how the part interfaces with adjoining pieces. This kind of geometry matters during service work because the fit, length and end shape need to match the original layout rather than relying on a near substitute. The short format named in the designation helps distinguish it from longer variants in the same functional family. For King Hauler 56301, that makes the part useful when a worn, missing or damaged connector needs to be replaced with the specified version. The part suits workshop tasks such as restoring linkage movement, re-establishing a mechanical connection or keeping an existing model ready for further assembly and running use. Its focused single-part format also makes it practical to keep on hand with other service components for planned maintenance on compatible truck builds. Warning! Not suitable for children under 14 years.
Basic accessories
Pinion Gear for 56301 Tractor Trucks, gear part
303505039€7.09
This pinion gear is a dedicated transmission spare for 56301 Tractor Trucks and for Tamiya trucks equipped with a 3-speed gearbox. The 3.17 mm bore and module 0.8 specification define the mechanical interface, so the gear matches the shaft diameter and tooth standard required in the drivetrain. The compact metal gear is built around a toothed outer profile and a central opening that matter directly in gearbox service work. In a truck transmission, the bore sits on the shaft while the teeth engage with the mating gear, making correct meshing and alignment essential for smooth rotation. That makes this part useful when a worn or damaged gear needs replacement with the same stated dimensions rather than a near match. The format is focused on function, with the gear geometry carrying the working role inside the transmission assembly. In workshop use, this spare suits planned maintenance, gearbox rebuilding and targeted repair on compatible truck models. It fits naturally into parts storage alongside other drivetrain components and gives model builders a clearly specified replacement when servicing a 3-speed truck transmission. Warning! Not suitable for children under 14 years.
Basic accessories
Plated fitting parts sprue, model accessory set
319225225€16.29
This plated fitting parts sprue brings reflective exterior detail to a scale model build through chrome-finished components arranged on a single rectangular frame. Curved and straight sections sit alongside a smaller angular piece, creating a set of trim-style elements that can change how the finished vehicle catches light across the front, sides or upper body areas. The sprue layout keeps each component attached until preparation begins, and the moulded numbering from 1 to 10 gives a direct reference for identifying individual pieces during the build. The visible SCANIA LA marking on the frame links the set to that subject designation in the source data. Because the parts are supplied unused on the runner, builders can inspect alignment, surface finish and placement before removal and fitting. The chrome-style plating adds a metallic appearance that suits grille surrounds, bumper bars, visor details or other exterior accents where a painted silver finish would create a different effect. On the workbench, this kind of parts frame supports careful planning before assembly and finishing. During a restoration, replacement or detail-focused build, the numbered plated sections help maintain order while separate body areas are prepared for installation.
Electronic
Position Light/R Rear LED Harness for Models
307175098€16.79
The Position Light/R is an electronic spare part for model lighting systems, built as the MFC LED Position Light/Rear J16 harness. Bundled leads, clear plug connectors and a compact loom layout support a tidy connection path inside a compatible model where rear lighting needs a dedicated cable run. Several blue and white twisted wire pairs are combined with 2 orange leads, creating a structured harness that keeps related connections together instead of leaving individual wires loose. A short black sleeve covers part of the bundle, giving one section added protection where the loom passes through tighter installation points. The connector ends are already fitted, so the harness is prepared for matching plug-in terminals rather than requiring separate connector assembly. This makes it suitable as a replacement lead when restoring an existing lighting circuit or completing a repair on a model with MFC electronics. The compact cable arrangement suits workshop tasks such as replacing a worn rear light connection, restoring plug continuity or routing a fresh loom through a body shell or chassis section. In a finished model, the harness supports the rear position light connection while keeping the wiring grouped and easier to trace during maintenance. Warning! Not suitable for children under 14 years.
Basic accessories
Press Parts Bag A 56304/56301, model spare parts
309405917€18.99
Press Parts Bag A 56304/56301 is a model spare parts set built around small metal construction elements for compatible assemblies. The assortment shown includes brackets, connector plates, fork-shaped pieces and round components, giving a direct source for replacing specific hardware rather than improvising with mismatched parts. The metal forms suit structural and mechanical connection points within a build. Flat oval links can bridge sections, triangular plates can support mounted areas, and hinge-like parts can restore pivoting joints where movement is part of the mechanism. Larger rectangular side plates add another format for frame or body attachment zones, while the round pieces with centre holes suit positions that need a mounted rotating element or hub-style part. This mix of stamped and cast shapes helps preserve the intended geometry of the original assembly. As a workshop addition, the set supports maintenance, repair and ongoing model care when original press parts are worn, bent or missing. It also helps keep a compatible build visually consistent by matching the hardware style used in the assembly instead of substituting unrelated fittings. Warning! Not suitable for children under 14 years.
Basic accessories
Q-Parts Front Grille, model parts for 56304
309115061€31.99
Q-Parts Front Grille for 56304 focuses on a specific body area and gives model builders the exact components needed for front-end restoration, repair or detail replacement. The set is supplied as black moulded parts on a single runner, with the grille section arranged alongside additional small pieces for an organised workshop start. The moulded layout helps keep each piece identifiable before removal from the frame, which is useful when a build calls for one damaged section to be replaced instead of a full body rebuild. The glossy finish gives clear edges for trimming and test fitting. Image-supported details show a large grille section with integrated rectangular light areas, plus further shaped inserts and small structural parts that support accurate placement within the 56304 build context. This makes the set relevant for maintenance work, spare-part storage or a long-paused project that needs original-style exterior parts. On the bench, the runner format keeps the components together until the required stage of assembly, helping the work stay structured during sorting, cutting and fitting. For restorations, the set can refresh the front appearance of 56304; for parts support, it provides a practical source of matching replacement pieces when individual exterior elements are no longer usable. Warning! Not suitable for children under 14 years.
Basic accessories
Q-Parts Grille Chrome, model accessory for 56301
300115109€27.99
Q-Parts Grille Chrome for King Hauler 56301 adds a bright plated finish to a truck model build with a dedicated grille section and a range of matching detail parts. The chrome-plated components arrive on sprues and are intended for assembly into the 56301 project, where reflective surfaces change the look of the front end and extend the metallic theme across the vehicle. Beyond the grille, the set includes long pipe-like pieces, cylindrical tank-style parts, brackets and smaller mechanical forms that broaden the detailing options around the chassis and body. Separate plated elements make it easier to plan paint boundaries and place contrasting finishes exactly where the build needs them. The mix of shapes suits exterior equipment areas, trim lines and add-on sections that benefit from a metallic look rather than a painted imitation. As model supplies for an existing truck kit, these parts focus on appearance and customization rather than replacing the main structure. On the workbench, the sprues support a measured, step-by-step detailing process with each plated section cut, prepared and fitted where the 56301 layout allows. Once installed, the added grille, tanks and pipework give the truck a more elaborate road-going character that stands out in close-up viewing, shelf presentation and photographed builds. Warning! Not suitable for children under 14 years.
Basic accessories
R Parts Fr.intakegrille M-B Actros model parts
319115371€20.49
This replacement parts set is made for the Fr.intakegrille area of the M-B Actros model reference 56335 and supplies a grouped selection of injection-molded components on one black sprue. The frame layout keeps each section organized before removal, making it easier to identify the shaped pieces needed for repair, restoration or completion work on the matching truck model. The molded set shows a mix of front-end and cab-related details, with grille-style inserts, trim sections, narrow bar elements, mirror-like parts and larger panel pieces. Dashboard-like components with circular instrument openings add another layer of scale detail where the cab interior needs matching replacement sections. Because the parts are supplied unassembled on the runner, the set suits careful model work that calls for clean separation, preparation and fitting of individual components. On the bench, this kind of parts frame is useful when an existing build needs specific front sections replaced rather than a full rebuild. It also supports ongoing maintenance of a finished M-B Actros model by keeping key visual areas such as the grille, trim and cab details consistent with the original reference 56335. Warning! Not suitable for children under 14 years.
Basic accessories
R-Parts Grille for 56312, model spare parts
300115277€35.99
R-Parts Grille for 56312 brings replacement body detail back into a model build with molded black components arranged on a single sprue. The set is intended as spare parts for 56312, making it a practical choice when a grille section or related exterior piece needs to be replaced during repair or restoration work. The visible parts layout shows several shaped sections with ribbed surfaces, curved panels, mounting plates with circular holes and smaller trim-like elements. Because the components remain attached to the runner, each piece stays organized until trimming and fitting begin at the workbench. The molded finish supports a consistent look across replacement sections, while the grouped layout helps identify matching parts before installation. This kind of spare-parts set suits careful rebuilds where damaged exterior details can interrupt the overall appearance of a completed truck model. On a long-term project, the set can be kept with workshop supplies for later maintenance or used immediately to refresh worn body areas on 56312. It also fits restoration tasks where original molded detail needs to be brought back into line after handling, transport or previous assembly damage. Warning! Not suitable for children under 14 years.
Basic accessories
Rear Fender Parts Set, RC model accessory
319225185€39.99
This rear fender parts set supplies the body panel pieces needed for RC model maintenance, with 2 large curved black fenders formed on a single molded frame alongside smaller fitting parts. The layout shown in the set centers on the rear body area, making it a focused replacement option when that section needs fresh components. Beyond the main fender shells, the frame carries brackets, connector arms, hinge-like pieces and a larger rectangular mounting base component. Light gray bushings or washer-like parts are also present on the sprue, supporting the attachment points around the rear section. The molded format keeps the parts grouped together before removal, which helps identify each piece during preparation. The black finish suits visible exterior placement, while the smaller structural parts support the fit of the larger curved panels. This accessory suits workshop use for restoring an RC vehicle body section or preparing spare parts for future maintenance. On the bench, the set gives builders a dedicated source for rear fender components and related fittings instead of replacing unrelated sections.
Basic accessories
Rear Fender Y Parts, model spare part on sprue
310225269€20.49
Y Parts Rear Fender 56348 is a model spare part set supplied as black moulded components on a sprue, intended for replacing specific body sections on a compatible build. The attached runners keep the individual pieces together before removal, while the moulded mounting holes and connector points show where the parts integrate into the larger assembly. The visible layout includes large curved shell sections, flat rectangular panels, side wall elements, hinge-like connectors and long curved outer pieces. This combination points to structural bodywork rather than decorative trim, making the set useful when an existing model needs a clean replacement for damaged or missing fender-related parts. The black finish gives a uniform base straight from the sprue and suits builds where matching the original moulded component matters during repair or restoration. This spare part set fits naturally into workshop tasks such as replacing worn sections, completing an interrupted build or keeping a frequently used model in running order. For hobby benches that handle maintenance as well as assembly, the organised sprue format makes it easier to identify, trim and prepare each section before final fitting. Warning! Not suitable for children under 14 years.
Basic accessories
Rear Fender Y Parts, model spare part, white
310225330€22.49
This Y Parts rear fender in white is a dedicated spare part for model maintenance and restoration work. It replaces a specific body section, making it useful when an original rear fender is missing, damaged or needs to be refreshed to bring a build back into working order and visual consistency. The part is identified in the data as Y Parts rear Fender white 770S and as rear Fender white 56368, pointing to a defined replacement component rather than a general-purpose accessory. The supplied reference image shows a numbered parts sheet on sprues, which supports parts identification during repair and rebuild tasks. That layout helps when matching the correct section to an existing assembly and separating the needed component from other numbered pieces in the set. In practical use, this rear fender fits naturally into workshop-style model care, whether a build is being repaired after wear, completed with a missing section, or prepared for a cleaner finished appearance. The white finish also provides a straightforward starting point for colour matching where the existing model requires further paintwork or detailing.
Basic accessories
Roof Beacon Lens Parts, Model Accessory Set
319115558€15.99
This accessory set supplies orange translucent roof beacon lens parts for model work where small light details need a clean replacement or a matching finishing touch. The sprue layout shows numbered injection-moulded pieces, including 2 round dome-shaped lenses, a long narrow bar, several small bracket-like parts with circular holes, and a larger rectangular frame section that keeps the parts together before removal. The clear orange material gives the beacon pieces the coloured lens look used on service and utility vehicle models. Number markings such as 1, 2 and 3 support part identification during assembly or repair, especially when a build calls for exact placement of small components. Because the pieces remain attached to the runner, handling stays orderly until each section is clipped free for fitting. This makes the set useful for replacing missing beacon glazing, refreshing older builds, or preparing a model with more complete roof-mounted light detail. On the workbench, the parts suit careful trimming, test fitting and finishing alongside other scale components. In a restoration setting, the set can return a vehicle model to a more complete appearance by replacing worn or absent beacon lenses with matching translucent pieces.
Electronic
Roof Lamp J20, model accessory, MFC LED unit
307175101€10.79
The MFC LED Roof Lamp J20 is a dedicated model accessory for adding a roof light point to a compatible vehicle setup. A preassembled lead set, compact plug connector and clear lamp element keep the electrical side focused on the actual lighting function, while the long cable run supports placement higher on the body where a roof-mounted lamp is needed. The harness shown for this J20 version combines multiple wire lengths in one assembly, including twisted brown and yellow leads and a separate orange cable loop. That layout helps guide the connection path between the lamp position and the matching electronics in a model build. Because the lamp holder and wiring arrive as one assembled unit, the part also works well as a direct replacement when an existing roof light circuit needs the correct component rather than a universal workaround. On workshop benches, scale trucks and other detailed vehicle projects, a dedicated roof lamp assembly keeps the lighting layout specific and neat. It suits repair jobs, restoration of existing functions and planned upgrades where a compatible MFC-equipped model calls for the J20 roof light part. Warning! Not suitable for children under 14 years.
Basic accessories
Roof Parts Volvo, model parts set, M-Parts Bag
319115494€30.99
This parts set centers on Volvo roof components and gives model builders a direct way to replace or complete a specific body section during assembly, repair or restoration work. The M-Parts Bag designation identifies it as a dedicated group of components for one defined area rather than a mixed assortment of unrelated spares. Used during a rebuild, the roof parts help restore the upper body line when an original section is missing, worn or damaged. The focused contents also make workshop organization easier, because the required pieces for this area stay together in one set. That can simplify planning for body completion, especially when a project needs a clean replacement stage instead of improvised part matching. The Volvo reference keeps the application tied to the named subject in the data. On the bench, this set fits naturally into repair sessions, long-term restoration work or the completion of an unfinished model. It also works well as reserve stock for future maintenance, where having the correct roof section ready can keep a build moving without delays caused by missing body components.
Basic accessories
S-Parts 56302, model accessory, orange parts
300115171€5.59
S-Parts for 56302 add a clearly matched accessory set for model maintenance, replacement work and careful rebuild tasks. The orange molded sections stand out immediately on the bench, making the parts easier to sort visually while preparing a repair or checking fit against the host model. The set is presented as connected molded parts, so each section stays grouped until removal and fitting. That layout supports a more orderly workflow when comparing shapes, planning the next installation step or setting aside unused sections during a repair. The bright orange finish also helps distinguish these parts from darker hardware and surrounding components on a busy work surface. As a model accessory, the set is aimed at keeping 56302 in working order rather than changing its function, which makes it useful for restoration, replacement of worn sections or storing matching spare parts for later service. On the workbench, the parts can be prepared alongside the main model during a scheduled rebuild or used to replace a damaged section when needed. The clearly visible color and grouped molded format support careful handling during workshop sessions focused on upkeep, fitting and continued use. Warning! Not suitable for children under 14 years.
Basic accessories
S-Parts Bag Clear Parts, model accessory sprue
319115495€24.99
S-Parts Bag Clear Parts is a model accessory sprue with transparent molded sections for vehicle glazing and body window areas. The frame holds several unused clear components in one organized layout, supporting precise selection during replacement work or while completing a compatible build. Visible shapes include a large curved front window, a tall rectangular panel, angled side windows and smaller insert pieces, giving the set a focused role wherever matching transparent body sections are needed. The molded layout keeps each section separated until removal, which helps maintain edge definition before fitting. The clear material is suited to windscreen, side window or panel applications where the underlying body shape needs visible glazing rather than opaque coverage. Different panel sizes and angles broaden the range of window positions covered by the set, while the single sprue format keeps the parts grouped together during bench work. This makes the set useful for restoring a worn model, replacing marked glazing or finishing a build that requires the original transparent sections. On the workbench, the sprue format supports a measured build rhythm, with each section easy to inspect before trimming and test fitting. For restoration projects, the grouped clear pieces provide a direct way to refresh the visual finish of a compatible vehicle model without changing its intended appearance.
Basic accessories
S-Parts Brakelight Clear Red 56301 Spare Parts
300115106€5.59
This S-Parts set provides 2 clear red brakelight lenses for the 56301 designation in the product data, giving a scale truck build the specific rear light detail needed when original parts are missing, worn or being replaced. The translucent finish and rectangular lens form suit visible light positions where color and surface definition matter. Each lens is supplied on a sprue frame as shown in the included contents, so the pair stays organized before fitting. The image-backed part details show textured lens faces and a compact molded format that supports precise placement on the intended model area. As a dedicated spare-parts set rather than a universal accessory, the focus stays on restoring the correct look of the named 56301 application with matching red light covers. This kind of replacement part fits naturally into workshop tasks such as repair, refurbishment or completion of an older build that needs its rear light sections brought back into shape. In a display model, the red lenses help complete the visual break between bodywork and lighting zones; in an active hobby build, they provide the small finishing detail that keeps the model's exterior consistent. Warning! Not suitable for children under 14 years.
Basic accessories
Scania 56318 R-Parts, model parts set, steps
309115184€16.99
This R-Parts set for Scania 56318 focuses on the step and fitting area of the truck model, supplying molded replacement sections that help restore exterior detail with the correct shapes and layout. The black parts are attached to a rectangular sprue, making each section easy to identify before removal and assembly. Within the frame are textured footplate-style pieces, long rail-like elements, flat panels and smaller bracket components that work together around the access and mounting zones of the model. The diamond-pattern surfaces give the steps the look of anti-slip metal plating seen on full-size trucks, while the matching supports and connectors help maintain a consistent appearance across repaired or completed sections. This kind of dedicated parts set is especially useful when a build needs specific exterior pieces rather than a full reissue of larger assemblies. On the workbench, the sprue layout helps with part sorting and planning before cutting and fitting begin. During restoration or completion of a Scania 56318 build, the set supports careful replacement of worn, missing or incomplete step-area details so the finished truck keeps its intended scale character. Warning! Not suitable for children under 14 years.
Basic accessories
Scania 56323 Metal Parts Bag B Model Spare Set
309400896€55.99
Metal Parts Bag B for Scania 56323 is a model spare set focused on the hardware and fittings used around the chassis and suspension area. The pack gathers matching replacement components in one reference, making it easier to service a build that needs the correct model-specific metal parts rather than generic workshop hardware. The contents shown for this set include curved spring elements, black mounting pieces, metal plates, U-bolts, coil springs, pins, screws, retaining clips, ball studs and pivot posts. This mix supports work on fixed connections, moving joints and clamped assemblies where the original layout depends on the right shapes and fastening points. The pink anodized aluminium cylinders add another distinct component group for the corresponding assembly and help keep the replacement work aligned with the intended specification of Scania 56323. Used during repair, rebuild or parts replacement, this set suits model benches where individual fittings have been lost, worn or damaged through repeated running or disassembly. It also helps when a matching stock of small mechanical parts is needed before maintenance begins, so the relevant hardware is ready for the correct section of the model. Warning! Not suitable for children under 14 years.
Basic accessories
Scania 56323, metal parts bag, model accessory
309400895€37.49
This metal parts bag for Scania 56323 brings together the small hardware needed for detailed mechanical work on the matching model. Black mounting plates, triangular brackets and oval linkage plates create a solid basis for fitted assemblies, while rods, posts and connector pieces support accurate alignment across moving sections. The set contains several bent metal linkage arms with 2-hole tabs, plus threaded rods that allow connection points to be positioned with care during repair or replacement work. Brass-coloured spacers or bushings help manage distance between mounted parts, and the mix of silver and gold-toned studs and fittings gives each joint a clearly defined role within the assembly. Small clevis-style parts on sprues and a long metal rod extend the range of usable connections for workshop tasks that call for pivots, hinges or adjustable mechanical transfer. On the bench, this assortment suits rebuilds, worn-part replacement and careful restoration of the intended Scania model. It also supports hobby work where original mounting hardware, linkage pieces or fastening elements need to be matched with the correct metal components for a clean mechanical fit. Warning! Not suitable for children under 14 years.
Basic accessories
Scania 56371 D Parts, model spare parts sprue
319007442€29.99
This D Parts sprue for Scania 56371 provides a grouped set of molded replacement components for model vehicle work where matching fit matters. The black frame holds several preformed pieces with mounting holes, curved sections, brackets and smaller fittings, so the required shapes stay together on one clearly organized runner during storage and selection. The layout shown on the sprue supports repair or continued assembly with parts that are formed for the Scania 56371 designation rather than generic workshop stock. Visible elements include plate-like sections, arm-shaped components, circular bushing-style pieces and elongated link forms, each molded as separate breakaway parts on the frame. This format helps identify the needed section before removal and keeps unused pieces attached until required. The molded structure also preserves hole placement and contour consistency across matching components. On the bench, this kind of replacement frame suits planned maintenance, restoration of a partly completed build or the swap of damaged sections after use. It can be kept with workshop supplies as a model-specific reserve for later repairs, or used immediately when the build calls for the D Parts set named for Scania 56371. Batteries are not included.
Basic accessories
Scania 770 S 6x4 Sticker Set, model decals
311421810€15.99
This sticker set is made for the Scania 770 S 6x4 model and brings the build closer to a finished road-going truck with model-specific graphics, technical markings and cockpit detail. Large black griffin head decals, gold Scania Vabis emblems and white Scania Super and Scania V8 logos give the cab and body a strong full-size truck character once applied. Beyond the main exterior graphics, the sheet carries dashboard cluster decals, control panel markings, ON and OFF labels, caution notices and reflective bars that extend the finish into the interior and mechanical areas. Number and letter sets allow registration-style details, while smaller labels help define switches, panels and service points across the model. The mix of branding, warning graphics and trim markings supports a more layered result than body graphics alone. Applied during the finishing stage, the decals help turn painted surfaces and cab sections into a more convincing Scania display or running model. The sheet suits builders who want the exterior, cockpit and utility markings to work together visually across the 6x4 truck layout. Warning! Not suitable for children under 14 years.
Basic accessories
Scania 770 S Driver Cab Part, model spare cab
319335871€42.99
This driver cab part for the Scania 770 S brings the main exterior structure back into a truck build with the roof shape, front cab section and side contours already formed in one piece. The shell is designed as a model spare cab, making it useful when an existing build needs a replacement body section or when a repair calls for the original cab geometry. The moulded piece shows recessed panel lines across the exterior, along with cutouts, roof holes and side fixing points that indicate where adjoining components are positioned during assembly. The large front windshield opening leaves space for the matching clear section and helps define the cab's forward profile, while the side window apertures set the frame lines for the finished look. Because this is a dedicated cab component rather than a complete vehicle, the focus stays on fit, structure and compatibility with the intended Scania 770 S build. The white moulding also provides a clear base for surface preparation and paint application where a rebuild or refinishing job is planned. On the workbench, this cab section suits restoration of a used truck model, replacement after damage, or completion of an incomplete project with the correct upper body form. It also serves as a practical spare for model collections that are maintained through part-by-part repair rather than full replacement. Warning! Not suitable for children under 14 years.
Basic accessories
Scania 770 S Exhaust Parts, model accessory set
319225234€23.99
This accessory set supplies moulded exhaust parts for the Scania 770 S 56371 and supports accurate restoration or completion of a matching truck model. The black parts arrive on a single sprue, making the individual shapes easy to identify before removal and helping keep related components grouped during the build process. Visible pieces include larger box-shaped sections, curved pipe forms, long ribbed side elements, bracket-like connectors and smaller attachment details. That mix allows the exhaust area and surrounding exterior sections to be rebuilt with matching forms rather than improvised substitutes. The runner layout also keeps slim rod-like pieces and smaller forked details organised until they are needed, which is useful when replacing lost parts or finishing a paused project. On the workbench, this set fits naturally into repair, upgrade or completion tasks for the Scania 770 S 56371. It can be used when an existing build needs fresh exterior detail, when a stored kit is being finished, or when specific exhaust-area components need to be replaced with matching moulded parts.
Basic accessories
Scania 770 S Metal Parts Bag model spare set
319406279€32.99
Metal Parts Bag F for the Scania 770 S brings together the metal hardware assigned to assembly steps 52 to 76, making it a focused spare or replacement set for this stage of the build. The assortment shown on the parts sheet combines fastening pieces with support brackets, so the front section can be assembled with the specified hardware types and sizes. Alongside the screws and nuts, the set includes 1 front bumper stay and 8 L-shaped stays. The front bumper stay is a shaped metal bracket with multiple mounting holes, intended for the front bumper area, while the L-shaped stays support right-angle connections between parts. The hardware mix covers several fastening formats, including 3 x 10 mm screws, 2 x 6 mm screws, 3 x 18 mm cap screws, 3 x 30 mm tapping screws and a 3 x 4 mm grub screw. Matching nuts and washers are also listed, including 2 mm nuts, 3 mm lock nuts, 3 mm flange nuts, 3 mm washers and 2 mm washers. This set suits repairs, replacement of missing hardware or a clean restart on the later assembly stages of the Scania 770 S. The clearly defined contents help keep the build aligned with the required fastener lengths, head types and bracket parts for the front-end structure.
Basic accessories
Scania 770 S Metal Transfer Sticker Decal
311421811€7.39
The Scania 770 S Metal Transfer Sticker sheet adds sharp finishing detail to a truck model with black graphics, stylised emblems and model-specific 770 S markings. Applied to selected exterior sections, these transfer elements bring cleaner visual separation to trim lines, cab panels and badge areas while keeping the look closely tied to the Scania 770 S designation. The sheet shows multiple coordinated graphics rather than a single logo, including 3 large V-shaped emblems with the number 8, 2 long black strip elements and a rounded black emblem shape. That layout supports placement across different body zones so the detailing can stay consistent from one section to another. The metal transfer format suits builders who want finer decorative accents on a completed model surface, especially where printed markings and narrow trim lines define the vehicle's character. The black colour scheme keeps the graphics focused and easy to combine with a wide range of paint finishes. On the bench, the sheet serves as a finishing stage for a Scania truck build, adding the final visual cues after body painting and assembly. In a display setting, the 770 S script, emblem shapes and trim strips help the model read more clearly as a specific road truck rather than a generic cab design. Warning! Not suitable for children under 14 years.
Basic accessories
Scania 770 S Sticker Bag, model decal set
311421856€20.59
This sticker bag is made for the Scania 770 S 8x4 model and brings the heavy haulage theme into the visible details that define the finished truck. Large silver-grey striping, Scania and SUPER markings, and BV Ventures Heavy Haulage graphics give the cab a purposeful transport look, while reflective strips and rear chevrons extend that finish into the working vehicle style seen on oversize road carriers. The sheet also covers smaller areas that change how the model reads at close range. Dashboard graphics, switch labels and center-console details fill the cab interior with printed instruments instead of blank surfaces. License plate markings, warning reflectors, caution labels and alphanumeric characters support custom registration and service markings across different sections of the build. The mix of branding, signage and technical labels helps the model carry the look of a truck prepared for specialist haulage work rather than a plain display shell. Applied during finishing, the decals support careful placement on cab panels, bumper areas and interior sections, turning paintwork and body parts into a more complete scale presentation. The sheet suits builders who want the Scania 770 S 8x4 to show transport-company identity, road-warning equipment and cockpit detail in one coordinated marking set.
Basic accessories
Scania 770S Interior Parts, model accessory sprue
319115549€16.79
The Scania 770S interior parts sprue brings defined cabin detail to a truck model build with molded seating, steering and console elements arranged on a single L parts frame. Unpainted injection-molded pieces give the builder a clean base for fitting, finishing and integrating the cockpit into the larger vehicle structure. The layout shown on the sprue includes 11 numbered components for the cabin area, with 2 individual front seats, a full rear bench seat, a steering wheel section, dashboard-style panels and side trim elements. Small mounting blocks and connector-style pieces support placement inside the cab and help separate the interior into recognisable sections rather than a single molded insert. The numbered diagram format also helps with part recognition before removal from the runner, especially when checking orientation and matching each section during the build. On the workbench, this accessory sprue suits builders replacing missing interior sections or completing a Scania 770S truck model with the correct cabin fittings. Once assembled and finished, the seat shapes, control area and trim pieces give the cab a more convincing look through the windows and across close-up display angles. Warning! Not suitable for children under 14 years.
Basic accessories
Scania 770S Light Bar, model parts set
319007342€28.49
The Scania 770S Light Bar parts set adds a crisp chrome-plated accent to a truck model build, with molded components supplied on a single sprue frame for clear preparation at the bench. Long bar sections and smaller fittings create a focused exterior detail upgrade that changes the look of the cab with a brighter, more technical finish. The frame groups several shaped pieces in one place, so the parts stay organized until removal and matching. Numbered sections support identification during the build, especially when working through individual mounting points and trim positions. The chrome effect surface gives the assembled light bar a reflective appearance that stands out against painted bodywork and other truck details. The set is presented as DD Parts for the Scania 770S and concentrates on visible add-on elements rather than structural chassis pieces. On the workbench, the sprue format supports careful cutting, sorting and test fitting before final placement. Once installed, the light bar components suit display-focused truck builds that benefit from extra cab detail and a more defined upper profile. Warning! Not suitable for children under 14 years.
Basic accessories
Scania 770S radiator grille, model truck spare part
319115551€15.29
This spare parts set focuses on the front face of the Scania 770S with molded grille and trim components that restore the truck's distinctive road-going look. The black sprue carries multiple exterior pieces in one layout, including a main radiator grille, vented panels and narrow trim elements that shape the nose section with the correct visual structure. The molded surfaces show mesh textures, louvered details and embossed SCANIA lettering, giving the finished build crisp definition across the front bodywork. The parts layout also supports practical workshop use, because each component sits in a numbered position on the runner for easier identification before removal and fitting. Larger fascia sections and smaller inserts appear together on the same tree, which helps keep related front-end pieces grouped during repair, replacement or rebuild work. On the bench, this set suits careful restoration of worn or incomplete truck assemblies as well as fresh body finishing on a matching Scania 770S project. It also works well when a build calls for clean replacement grille parts after paint preparation, test fitting or detail refinement around the front panel area. Warning! Not suitable for children under 14 years.
Basic accessories
Scania Battery Holder, RC spare parts set
319115567€29.79
This RR spare parts set provides the battery holder components for the Scania 56371 model and supports accurate repair work where the original battery mount needs replacement. The black molded parts are supplied on a numbered sprue, so each section can be identified before removal and prepared for the matching position during maintenance. The runner format keeps the individual pieces together until fitting begins, which helps when sorting replacement sections for a rebuild or restoration task. Visible molded numbering on the frame includes RR and multiple part numbers, giving a clear reference point while checking the required section against the damaged area. The set is intended for model maintenance rather than a complete build, making it a practical choice when one specific mounting area needs attention. As a dedicated spare parts release, it focuses on the battery holder zone and related structural pieces instead of replacing unrelated assemblies. On the workbench, the sprue layout supports a methodical repair process, from identifying the correct numbered section to clipping out the needed piece for installation. It also suits stored replacement stock for Scania 56371 owners who maintain an existing model and want the correct RR parts ready for future service.
Basic accessories
Scania Clear Parts, model accessory sprue
309115185€16.49
This Scania clear parts set provides the transparent sections needed for detailed model work on reference 56318. The moulded pieces come as S Parts on a single sprue, keeping each section connected and easy to handle before cutting, trimming and fitting into place. Large clear panels and smaller window-style elements support a clean finish wherever the build calls for transparent body sections. The image shows several distinct transparent components, including broad screen-like pieces, rectangular window panels and narrow frame-linked sections. That layout helps separate the parts during preparation and gives a clear view of each moulded edge before assembly. As a model accessory set rather than a full kit, this pack concentrates on the specific clear sections used to restore worn parts, replace damaged pieces or complete a matching Scania build with the correct transparent elements. On the bench, the sprue format supports careful step-by-step work with cutting, dry fitting and final placement. It suits repair projects, part replacement and planned rebuilds where the original glazing or clear exterior sections need fresh components matched to 56318. Warning! Not suitable for children under 14 years.
Basic accessories
Scania Clear Parts, model accessory sprue
309225094€10.79
T-Parts Clear Parts Scania 56318 supplies the transparent sections used to complete key visual areas of the model, with clear polystyrene pieces arranged on a single injection-moulded sprue. Curved sections, small round elements and rectangular inserts give the build the distinct transparent surfaces that painted parts cannot reproduce, from cab glazing to lamp and marker details. The unused parts remain attached to the runner for clean storage and clear part separation before assembly. Visible moulded identifiers such as T and numbered tabs including 1, 2, 3, 4 and 44 help distinguish individual sections during the build process. The transparent finish allows light-related details and window openings to retain their defined shape, while the moulded layout keeps each section easy to inspect before cutting and fitting. This accessory suits repair work on an existing Scania 56318 model as well as completion of a build that needs the original clear sections restored. On the bench, the sprue format keeps the parts together until each piece is prepared for installation, helping maintain order while glazing and lens areas are assembled into the finished model. Warning! Not suitable for children under 14 years.
Basic accessories
Scania Grille M-Parts, model accessory for 56318
309115182€14.29
The M-Parts grille set for Scania 56318 is a dedicated model accessory for restoring or replacing the front grille section on the specified build. With 3 included M parts, the set focuses on one clearly defined area, making it useful when an existing grille section is missing, worn or needs to be renewed during maintenance work. Because the set is assigned specifically to 56318, parts selection stays straightforward and the grille area can be matched to the intended model without relying on generic alternatives. The compact contents keep the scope precise: 1x M parts set with 3 parts for the grille section. That makes the set suitable for planned refurbishment, careful repair work or keeping matching replacement parts on hand for later service. On the workbench, the set fits naturally into rebuilds, body restoration and replacement jobs centered on the front end of Scania 56318. It also works well as a spare set for model collections that are maintained over time and need the correct designated parts ready when wear or loss appears. Warning! Not suitable for children under 14 years.
Basic accessories
Scania H Parts, model parts set, bumper fenders
319007447€19.69
Scania H Parts brings front bumper and fender components together in one molded set for truck model work. The white parts are supplied on a sprue, making the individual sections easy to identify before cutting, cleaning and fitting them into place on the build. The visible layout includes 2 large curved fender-style pieces, a wide bumper panel with cutouts and circular mounting details, smaller bracket-like sections and an additional curved panel. That mix supports body restoration, replacement of worn sections or a fresh exterior finish on a matching Scania project. The injection-molded construction gives each piece defined edges and consistent contours that help during test fitting, surface preparation and paint planning. Because the parts are still attached to the runner frame, handling stays organized while each section is prepared in sequence. On the workbench, this set fits naturally into repair sessions, custom detailing or the completion of an unfinished truck build. It also works well when an existing model needs fresh front-end body sections to bring the exterior back into shape with matching molded components.
Basic accessories
Scania Heavy Rack Frame 1 model parts sprue
319115562€32.29
MM Parts Frame 1 Heavy Rack Scania 56371 supplies a dedicated sprue for model work that calls for the correct structural section instead of a complete new kit. The dark gray runner holds 4 large molded components with a mirrored layout, making the set useful for repair, restoration or continued assembly on a Scania build. Each piece remains attached to the surrounding frame by small gates until removal, so the parts stay organized and easy to inspect before cutting. The molded geometry shows rectangular outlines, angled reinforcement areas, tabs and screw-hole style mounting points that indicate a structural role within the model. Because the 4 sections share a matched left and right arrangement, the sprue supports consistent placement where symmetry matters. The unused injection-molded finish also makes it easier to check edges, attachment points and part orientation before fitting. On the bench, this kind of replacement frame helps keep an interrupted build moving when one section needs to be renewed or matched again. It also suits careful stock planning for larger truck model projects where exact spare sections save time during maintenance, rebuilds or detail-focused workshop sessions.
Basic accessories
Scania High Roof with Spoiler M Parts Set
319115563€23.39
This M Parts set focuses on the upper cab area of the Scania 56371 and provides the high roof with spoiler as dedicated replacement components for the matching truck model. The parts view highlights the roof section as a separate assembly area, which helps when a build needs the correct upper profile rather than a generic substitute. The set is centered on bodywork detail instead of drivetrain hardware, making it relevant for repair, restoration or completion work on the specified Scania version. The high roof changes the cab outline, while the spoiler section completes the top edge with the shape intended for this designation. That makes the set useful when an existing build has damaged upper cab parts, when a stored model is being brought back into running or display condition, or when a project needs the correct body section before painting and final fitting. On the bench, these components support careful model maintenance with parts matched to the named Scania 56371 reference. The separate roof and spoiler elements also help keep replacement work focused on the upper cab area instead of changing larger assemblies that do not need attention.
Basic accessories
Scania R470/620 Cab Hinge, model spare part
309805661€5.99
This spare hinge set is made for the Scania R470/620 cab and restores a key moving connection where two panels need to open and close on the model. Supplied as 2 pieces, the set provides the matching hardware needed for a clean replacement on the specified truck cab. The metal construction and central pivot barrel form the working joint, allowing the mounted section to swing on a fixed axis once installed. Each hinge has 4 round screw holes, giving clear mounting points for attachment to the cab structure. The compact format suits scale-model repair where the fit of the hardware matters as much as the movement itself. As a dedicated spare part, this set is useful when an original hinge is damaged, missing or no longer holds the cab section as intended. In workshop use, the pair can be fitted during maintenance, part replacement or a careful rebuild of the Scania R470/620 body section. The simple hinge form also makes it easy to identify orientation and placement when matching the new parts to the existing mounting points on the model. Warning! Not suitable for children under 14 years.
Basic accessories
Scania R620 6x4 Highline, sticker set, 1:14
309495581€31.49
This 1:14 sticker set is made for the Scania R620 6x4 Highline and brings the finishing stage of a tractor truck build into sharper focus with model-specific graphics, lettering and trim details. SCANIA scripts, HIGHLINE and TOPLINE markings, warning labels and grille graphics give the cab and bodywork the exact visual cues that turn painted surfaces into a recognisable road-going truck. The sheets also include alphanumeric decals with repeated letters, accented characters and number sets for custom plate and fleet-style marking layouts. Small detail graphics cover dashboard controls, lamp elements, reflectors and technical labels, so exterior panels and interior areas can be finished with finer printed detail instead of plain colour blocks. A separate mesh-style sheet expands the detailing options further and can be used where a textured insert suits the chosen build. During the final stages of a display build or RC tractor truck restoration, these parts help refresh worn markings or complete a body shell that needs the correct Scania identifiers. The mix of large branding graphics and small technical decals supports careful placement across cab front, sides and detail zones, giving the finished model a more complete scale appearance. Warning! Not suitable for children under 14 years.
Basic accessories
Scania R620 HL Main Plate, model spare part
309115247€17.29
This Scania R620 HL main plate spare part set supplies injection-molded black components arranged on a single parts tree for model repair, replacement or ongoing assembly work. The frame holds several flat plates, cylindrical posts, brackets and connector sections, giving the build a clear source for structural elements that need exact fit and consistent shape. Within the sprue, the larger plate sections appear suited to base or support duties, while the molded posts act as mounting pillars or spacers where internal sections need separation and fastening. Smaller bracket pieces add further connection points, and the rectangular textured panel with its raised dot pattern and molded holes introduces a distinct surface section that stands apart from the smoother structural parts. Visible markings on the frame include P, 3, 4, 5 and 7, which help identify the individual molded sections during part selection. This kind of replacement frame suits workshop shelves, repair benches and ongoing truck model projects where a specific original section is needed rather than a full new kit. It also supports careful stock-up for builders maintaining a Scania R620 HL model over multiple assembly or restoration sessions. Warning! Not suitable for children under 14 years.
Basic accessories
Scania Roof Beacon Socket, model spare part
319007446€15.99
This spare part set supplies the roof beacon socket for the Scania 56371 model and gives restoration or repair work the exact component group needed for the upper body section. The parts are molded on a single sprue, so each piece stays clearly arranged before removal and fitting. The frame shown in translucent gray carries several small molded elements for the beacon mounting area, including ring-shaped parts, square plates with corner holes, connector tabs and longer panel-like sections with circular and rectangular cutouts. That layout helps identify each section before assembly and supports a controlled replacement process when an existing build needs fresh roof details. As a dedicated HH part, the set is aimed at maintaining the original look and fit of the Scania model rather than adapting it with unrelated components. On the workbench, the sprue format helps keep the parts together until the required section is selected and trimmed free. It suits repair tasks, parts replacement and careful rebuilds where the roof area needs matching components for a clean, consistent finish.
Basic accessories
Scania S770 Front Bumper, model spare parts
319007359€26.79
These spare parts are made for the Scania S770 and focus on the front bumper area, giving model builders a direct route to replace a worn, damaged or unfinished front section on the truck body. The moulded pieces come as unpainted components on sprue frames, so each section can be removed, prepared and integrated into the existing build with the finish matched to the rest of the cab. The set is centered on body assembly rather than electronics or chassis hardware, which keeps the scope clear when a front-end repair is needed. The parts layout shows multiple numbered components, supporting part recognition during trimming and placement. As moulded replacement pieces, they suit restoration work on an already owned model as well as completion of a body that needs its front bumper section before painting. The unpainted surface also leaves room for primer, colour coats and detail finishing that match the chosen Scania S770 look. On the workbench, these parts fit naturally into repair, rebuild or completion tasks where the front body line needs to be brought back into shape. They also serve builders who keep spare body sections ready for future maintenance between display periods or running sessions. Warning! Not suitable for children under 14 years.
Basic accessories
Scania S770 Steps, model parts set, silver sprue
319007341€15.29
This Scania S770 parts set brings extra surface definition to a truck model build with moulded silver components, textured inserts and clearly numbered attachment points on a single sprue. The layout shows 11 separate pieces, including curved trim sections, rectangular inserts, a large diamond-plate style panel, a broad textured cover section and a narrow strip part for smaller finishing areas. The different textures give each section a distinct role in the finished assembly. Mesh-style inserts and circular raised details help break up larger surfaces, while the metallic silver moulding makes the parts easy to distinguish before painting or fitting. Because the components remain attached to the runner, each piece stays organised until removal, which helps with identification during staged assembly and detail work. The larger panels also provide broad visible areas where embossed patterns can stand out once installed on the model. At the bench, this set suits replacement work, restoration of worn sections or a more exact finish on a Scania S770 truck project. It also supports custom builds where step areas, trim sections and textured panels need fresh parts that match the scale look of the original assembly. Warning! Not suitable for children under 14 years.
Basic accessories
Scania Side Panels, model spare parts sprue
319115560€18.99
This spare parts sprue supplies side panels for the driver cab of the Scania 56371 and gives repair or restoration work a direct starting point with matching exterior components in white moulded material. The runner holds several shaped pieces together in one frame, so the parts stay organised until removal and the cab bodywork can be rebuilt with components intended for that section. The moulded forms shown on the sprue include long trim-like sections and curved body pieces that suit exterior cab work rather than chassis or drivetrain tasks. That makes the set useful when a build needs replacement bodywork after handling damage, paint stripping or a detail update. Because the parts are still attached to the frame, each section can be checked against the cab area before cutting free. The white finish also gives a clear base for surface preparation and paint planning during a rebuild. On the workbench, this sprue fits naturally into a repair session focused on restoring the Scania cab to a complete outer shape. It also supports planned custom work where original body sections are replaced before painting and final assembly continue on the model.
Basic accessories
Screw Bag A 56323, model hardware set
309465765€18.99
Screw Bag A 56323 brings together a broad assortment of metal fasteners for model assembly, repair and parts replacement. The set shown includes machine screws in different lengths along with hex nuts, flange nuts and lock nuts, creating a practical hardware supply for builds that rely on secure mechanical connections. The variety of fastening types supports more than one stage of workshop use. Machine screws handle joined sections and mounted parts, while lock nuts with blue nylon inserts help hold threaded connections in place where a firmer fit is needed. Flange nuts add a wider contact surface at the fixing point, and the mix of black and silver finishes helps separate hardware types during sorting. This makes it easier to prepare parts before assembly, replace missing fittings, or refresh older builds with matching hardware rather than mixed leftovers. On the workbench, a hardware pack like this fits naturally beside chassis parts, body mounts and other model components that need reliable threaded fixing. It also serves as a useful reserve for rebuilds, maintenance sessions and general hobby storage, where having the right screw or nut close at hand keeps assembly work moving cleanly.
Electronic
Speaker Unit for 56511, model accessory
307295012€32.49
The Speaker Unit for 56511 is a dedicated model accessory for compatible Tamiya setups that require a matching audio component. Its clearly stated designation keeps the intended application focused, making it easier to identify the correct speaker part for a sound-based configuration rather than a general-purpose electronics add-on. This accessory is described specifically as a speaker unit, which places its function in the audio side of a model build. That clear role matters when a setup calls for a defined sound output component instead of a broader replacement part. The reference to 56511 narrows the fit context further and helps separate this unit from unrelated electronics in a workshop or parts collection. With batteries not included, any power arrangement depends on the compatible system it is used with rather than on a separate battery supplied here. On the bench, the unit suits builders who are completing, maintaining or refining a compatible sound-equipped model configuration. It also fits neatly into a spares and upgrade collection where exact accessory matching matters as much as the main build itself. Warning! Not suitable for children under 14 years.
Electronic
Speed Indicator, model accessory, LED set of 3
307175112€14.99
This Speed Indicator set adds a dedicated LED signaling function to a compatible model electronics layout, using 3 connected light elements on a single harness for a tidy installation. The wiring assembly combines twisted yellow and black leads with white plug connectors, giving the set a clear, workshop-ready format for replacement or accessory use. The 3 indicators are identified in the data as MFC LED Speed Indicators under references J25, J26 and J27, which helps match the harness to the correct positions in an existing compatible setup. The compact light elements sit at the end of the lead, while the grouped cable format reduces loose separate wiring during fitting. This makes the set useful when restoring a model's original lighting functions or adding the specified indicator points to an MFC-based configuration. Batteries are not included. On the bench, the harness can be routed through a body or chassis area and connected through the fitted plugs as the electronics layout requires. In a completed model, the 3 LED points add a defined visual signal effect that suits detailed truck or vehicle presentations as well as replacement work on an established build.
Basic accessories
Step Screw 3x18mm BA6, model screw set
319808291€2.19
The Step Screw 3x18mm BA6 is a model screw set for repair, replacement and routine workshop use on compatible assemblies. Its stepped screw format combines a 3 x 18 mm size with a defined shaft profile, giving builders a precise hardware option when an existing fastener needs to be exchanged or matched during maintenance. The pack contains 10 screws, which helps keep identical hardware on hand for repeated fastening points instead of mixing different sizes or thread types. The metal finish shown in the set suits technical builds where clean, consistent hardware matters during reassembly. As a spare-part format rather than a general mixed assortment, this screw set supports more exact parts management on model projects and service work. The compact specification also makes it easier to sort alongside other workshop fasteners by size and type. On the bench, these screws fit naturally into repair sessions, rebuilds and parts replacement after wear or loss. They also work well as reserve hardware kept with a model kit, so matching screws are ready when a compatible mounting point needs the same BA6 specification again. Warning! Not suitable for children under 14 years.
Basic accessories
Sticker Bag 56366, decal set for RC truck models
319490025€29.49
Sticker Bag 56366 is a decal set for the Mercedes-Benz Arocs 4151 8x4 Tipper Truck in 1/14 scale, bringing the finishing layer that gives the RC truck its working-road character. Hazard chevrons, reflective bar markings, long striping and Mercedes-Benz graphics shape the cab and body with the visual language of a full-size tipper in service. The sheet also carries silver diamond-plate pattern decals for areas such as steps, fenders or body sections where a metal tread look sharpens the scale impression. Smaller markings add another level of detail, including dashboard graphics, instrument-style decals, warning labels and ON/OFF labels for functional areas. Letter and number sets open up custom fleet-style identification, while company graphics such as OSHIKA TIPPER CO., LTD. support a more individual finish. Because the decals are model-specific, they suit both a first body completion and the replacement of worn or damaged markings on an existing build. On the bench, the set supports careful body finishing with crisp visual references for exterior panels and interior accents. Once applied, the graphics help the 1/14 truck read more convincingly in static display, workshop photos and running scenes on a scale construction layout.
Basic accessories
Sticker Bag M-B Arcos 56357, decal set
319495932€26.49
This decal set brings the finishing layer to a 1/14 RC Mercedes-Benz Arocs 3348 6x4 tipper truck with printed markings that sharpen the look of the cab, body and tipper. Hazard stripes, reflective-style panels, trim graphics and dashboard decals give flat painted surfaces more visual structure once applied to the intended sections. The sheet also carries warning labels such as HOT! MOTOR and ROTATING PARTS, along with logo graphics, licence-style identifiers and operator markings including OSHIKA TIPPER CO., LTD. Multiple rows of letters and numbers support detailed labelling work across the model, while the smaller separate silver decal piece adds metallic-look branding and trim accents for selected exterior zones. The mix of large panels and small instrument graphics allows the finish to move from broad body markings to close-up cab detail without changing style. Applied during the final detailing stage, the decals help turn a built truck into a more complete scale replica for shelf presentation, club display or careful running sessions. The range of markings suits builders who want the bodywork, tipper sections and interior details to carry the same model-specific identity across the whole vehicle.
Basic accessories
Sticker Bag M-B C11 RC Decal and Masking Set
319494248€19.29
This sticker bag is tailored to the 1:10 RC 1990 Mercedes-Benz C 11 body and brings two finishing stages together in one set: paint masking and race livery application. The sheet combines pre-cut masking stickers for the clear window areas with a waterslide-style decal layout carrying the markings shown for the C 11 race car, so the body can move from clear shell to track-style presentation with model-specific graphics. The masking stickers are labeled by section and are applied from the inside of the body before painting, where they cover the transparent window zones during overspray. A printed guide shows removal from the center slit of the lining for larger pieces, which helps when lifting and positioning broad mask sections. The decal sheet adds Mercedes-Benz branding, sponsor logos such as Castrol, Bilstein, AEG and Goodyear, driver names, race numbers, and smaller body-detail markings. Trim graphics for lamp areas, grille shapes, vents, marker lights and panel outlines extend the finish beyond the main livery blocks. On the bench, the set supports a cleaner paint sequence before the final graphics go on. During body finishing, the labeled masks help organize each section, while the detailed markings give the C 11 shell the visual character of a period endurance racer once painting is complete. Warning! Not suitable for children under 14 years.
Basic accessories
Sticker Bag MAN TGX 18.540, decal set, 1:14
319495693€26.99
This decal set is made for the 1:14 MAN TGX 18.540 4x2 XLX truck model and adds the printed details that give the build its road-going identity. MAN logos, TGX 18.540 designation markings and matching graphic elements bring the cab, grille and body sections together with the look shown on the full-size vehicle. The sheet also opens up custom finishing work through repeated alphabet letters, extra character groups and multiple number sets for individual plate combinations and fleet-style markings. European-style license plate graphics and country code decals support region-specific finishing choices, while interior instrument, console and screen graphics fill the cab with printed detail that would be difficult to recreate by hand. Additional caution labels, heat warnings and rotating-parts markings place technical notices where they belong on the model. Reflective panels, red warning triangles and grey tread-pattern strips add further scale touches for rear sections, steps and walkway areas. Used during the finishing stage, the sheet supports anything from a clean factory-style layout to a more personalised truck presentation. It suits builders who want sharper cab detail, more complete chassis markings and custom plate options while keeping the MAN TGX 18.540 theme consistent across exterior and interior areas. Warning! Not suitable for children under 14 years.
Basic accessories
Sticker for 56313 Decal Sheet Model Accessory
309495409€19.49
This decal sheet for 56313 brings the KNIGHT HAULER body design into focus with bold lettering, long striping and emblem graphics sized for a scale truck finish. The waterslide format supports close application on body panels, where the red and black multi-line graphics and silver pinstripes build the custom road-truck character shown in the set. Beyond the large side graphics, the sheet carries smaller printed details that sharpen the model's overall appearance. Gauge faces, control labels, registration markings and equipment graphics give extra definition to dashboard, panel and trim areas that benefit from finer printed decoration. Mirrored graphics help keep the left and right body sides visually aligned, while the mix of broad decals and compact markings supports both headline styling and close-up detail work. The horse-and-knight crest graphics add another distinct visual element to the finished truck body. Used during the finishing stage of a truck build or body refresh, the sheet suits projects that need replacement markings for 56313 or a clean rework of the original KNIGHT HAULER livery. It fits naturally into paint and detailing sessions where cab sides, sleeper sections and smaller trim zones are completed step by step. Warning! Not suitable for children under 14 years.
Basic accessories
Sticker MAN TGX 26.540 Ver.II, decal sheet
319495825€26.49
The Sticker MAN TGX 26.540 Ver.II decal sheet adds the finishing layer that gives a scale truck build its specific identity. Designed for the MAN TGX 26.540, it combines exterior branding, trim graphics and interior markings on one sheet, so the cab, body sections and detail areas can be matched with consistent printed graphics. Beyond the main MAN logos and TGX 26.540 markings, the sheet carries dashboard and control panel graphics that bring the cab interior into sharper focus during close viewing. Rows of letters and numbers support custom registration plates and fleet-style combinations, while country identifiers expand the range of European-style finishing options. Additional printed elements such as ON and OFF switch labels help define control areas on the model with clear visual cues. Caution markings for hot motor and rotating parts add workshop-style realism to mechanical zones, and reflective rear panels extend that detailed look to the truck's back end. During a careful finishing session, the different graphic groups can be placed step by step across cab exterior, interior and rear detail points to build a more complete road-going appearance. On a shelf, in a display case or alongside other scale trucks, the combined effect of logos, plates, dashboard graphics and warning markings gives the model a more convincing full-vehicle presentation. Warning! Not suitable for children under 14 years.
Basic accessories
Suspension Stay Bag, model accessory for 56313
309400030€23.99
The Suspension Stay Bag for 56313 gathers a range of stamped metal parts for maintenance, replacement and mechanical assembly work on the matching model. Black and silver finishes separate several component types at a glance, while the mix of flat plates, bent brackets and link pieces gives a practical stock of shaped hardware for restoring fitted connections. Within the bag are trapezoid plates with round mounting holes and a central rectangular cutout, formed caps with 3 holes, folded double-ear brackets, forked connectors, rounded rectangular links, and triangular fixing pieces in more than one shape. These parts are built around specific hole layouts, tabs and bends rather than generic sheet metal, which matters when a repair depends on the original mounting geometry. The assortment shown also includes pieces with riveted or studded details, supporting joined sections that need the same attachment style as the existing assembly. As a dedicated accessory for 56313, the set suits bench work where worn, bent or missing suspension-related hardware needs to be brought back into service. Used during routine upkeep or a more focused rebuild, the bag helps keep matching metal stays and connectors close at hand. It also fits parts storage for longer-term model care, where having the correct bracket and plate shapes ready can shorten workshop interruptions. Warning! Not suitable for children under 14 years.
Basic accessories
T Parts for 56301, model parts set on sprue
309225047€14.79
T Parts for 56301 supplies a dedicated set of moulded components for the specified model, with translucent smoked pieces presented on sprues for trimming, test fitting and installation during the build. The set centers on shaped exterior-style sections with curved surfaces, attachment tabs and round mounting posts that indicate a defined position within the matching assembly. The largest section has a broad curved form that suits a screen, canopy or window-style area, while the surrounding sprue carries additional inserts in several sizes for adjoining sections. Two larger rounded-rectangle panels and 2 smaller angled pieces expand the usable set for detailed fitting work across the same designated build. The moulded ring detail and connecting bars visible on the sprue show the parts in their factory-formed layout before separation. The translucent finish allows underlying structure lines and mounting points to remain visible during positioning, which can help when aligning each section before final attachment. This set suits repair work, restoration of an incomplete build or progress on a model that needs the correct designated parts for 56301. On the bench, the separate shapes support careful cutting, cleanup and dry fitting before the components move into their final mounted positions on the matching assembly. Warning! Not suitable for children under 14 years.
Basic accessories
T Parts for 56312, model spare parts set
300225087€10.29
T Parts for 56312 is a model spare parts set identified by the matching reference 56312. The designation points to replacement components intended for an existing model rather than a complete kit, making this set useful when worn or missing parts need to be exchanged. The available data confirms the spare-parts function and the linked reference, so the focus stays on maintenance and repair use. Kept with workshop supplies, the set supports planned upkeep as well as later replacement work when a matching model needs attention. The reference-based naming helps separate this set from general hobby accessories and directs it toward a specific application in the range. On the bench, the set fits naturally into routine model care, whether the goal is to replace damaged pieces, refresh an older build or prepare for future repairs. Stored with other maintenance supplies, it provides a straightforward source for parts matched to the 56312 designation. Warning! Not suitable for children under 14 years.
Basic accessories
T-Parts Bag(T), model parts set, exhaust antenna
319225193€27.49
T-Parts Bag(T) is a model parts set centered on 2 exterior details: an exhaust and an antenna. Supplied as black injection-molded components on a sprue, the set gives model builders a direct way to replace missing pieces or complete a body with the small fittings that shape its final appearance. The rectangular runner holds the separate molded sections in place until trimming, which helps keep each part easy to sort and prepare at the workbench. The black finish suits projects that call for dark detail parts, while the molded format supports the usual sequence of cutting, cleaning attachment points and test fitting before final installation. Because the set focuses on exterior fittings rather than structural sections, it works best where a model needs specific visible details restored or added. On a repair project, the exhaust can refresh a worn body detail and the antenna can complete the upper profile that many vehicle builds rely on for an accurate silhouette. On a fresh build, the set fits naturally into the later detailing stage, when smaller add-on parts bring the shell closer to its intended finished look.
Basic accessories
T-Parts Gear Tower for Leopard 56020 Model
309225077€18.29
This T-Parts gear tower set for Leopard 56020 focuses on a key transmission area, pairing a large metal gear wheel with matching molded components for the gearbox assembly. The combination supports accurate replacement work where worn, missing or damaged tower parts interrupt the mechanical flow of the model. The visible parts include a fine-toothed gray gear, a raised black hub mounted on the gear face, and several black molded pieces on a sprue. Among them are a large circular cam or hub section with a splined center opening, a ring-shaped part with an attached arm and mounting hole, a split collar piece and a small washer-like ring. These shapes point to positioning, spacing and driven movement within the tower layout, so the set is suited to targeted drivetrain repair rather than general cosmetic replacement. The dedicated Leopard 56020 designation keeps the fit tied to the intended assembly. For workshop maintenance, rebuilds or selective parts replacement, this set gives the gear tower area the specific mechanical pieces needed to bring the transmission section back into service. It fits naturally into repair jobs where the gearbox must mesh, locate and rotate correctly under running load. Warning! Not suitable for children under 14 years.
Basic accessories
T-Parts Windows for 56304, model spare part
309225049€19.99
T-Parts Windows for 56304 is a dedicated spare part for model maintenance and repair. The set is intended for the 56304 model and focuses on the window section, making it a direct choice when the original glazing part needs replacement during a rebuild or refresh. The clear window area plays a visible role in the finished appearance of a scale model, especially around the cab or body opening where edges and fit remain in view. Using a part specified for 56304 keeps the selection tied to the named model instead of relying on a generic substitute. That matters during refurbishment work, parts sorting and workshop preparation, where the exact designation helps separate body hardware from tyres, chassis parts and running gear. As a spare component rather than a full kit, this set fits naturally into repair stock for ongoing model care. It can be used when replacing scratched glazing after use, when completing an unfinished build, or when preparing a stored model for display. In a hobby workspace, a model-specific window part also helps keep repair planning straightforward when the goal is to restore the correct transparent section for 56304. Warning! Not suitable for children under 14 years.
Electronic
Tail Lamp J19, LED light set for model vehicles
307175100€10.99
The Tail Lamp J19 is a compact LED light set for compatible model vehicles, combining 2 wired lamps with a ready-routed cable layout for rear lighting detail. The paired red and black leads and the bundled harness give the assembly a clean structure that suits installation in confined body sections, where neat cable routing matters as much as the light itself. This lighting part is built as a dedicated tail lamp component rather than a general electronics accessory, making it useful for replacement work, restoration or a fresh build that needs the correct rear lamp function. The small lamp heads take up little space, while the longer wire loop and separated leads support connection planning inside the chassis or body shell. The visible harness layout also helps identify each run during fitting, especially when several light cables sit close together in the same build. Mounted at the rear of a compatible model, the set adds the focused light signature expected from a tail lamp arrangement and completes the look of a detailed vehicle body. It also suits workshop stock for maintaining existing builds, where a matching wired lamp assembly can return a lighting system to working order with the correct component type. Warning! Not suitable for children under 14 years.
Basic accessories
Taillight Glasses, model spare parts, red pair
319005968€10.79
These BB-Parts taillight glasses bring a clear finishing detail to scale vehicle bodywork with 2 translucent red molded pieces shaped as a mirrored pair. The curved forms are designed for rear light positions, where the colored material gives painted shells or body sections a more realistic lens appearance. Each piece is supplied on a parts runner, with molded sprue markings visible for identification during preparation and fitting. That layout helps keep the left and right components together before clipping, which is useful when replacing missing parts or refreshing an older build. The transparent red finish works as a visual light element rather than a painted surface, so the rear section keeps the depth and color contrast associated with model taillights. On the workbench, these parts fit naturally into repair jobs, restoration projects or detail updates on an existing model. They also suit builders who want to replace worn light covers after handling or transport, keeping the rear end visually complete with matching red lenses on both sides. Warning! Not suitable for children under 14 years.
Basic accessories
Turret Ring Bag, model accessory for 56019
309335411€33.49
Turret Ring Bag for 56019 is a dedicated model accessory for the specified 56019 application. The clearly named part focus makes it suited to repair, replacement and maintenance tasks where the correct ring component is required for the matching model. As a bagged spare part, it serves a precise role within an existing build rather than acting as a general-purpose accessory. That direct compatibility with 56019 helps avoid guesswork when a worn, missing or damaged ring component needs to be exchanged. The designation centers on the turret ring itself, which makes this accessory especially relevant for keeping the intended model configuration in working order with the correct part reference. It fits naturally into workshop routines such as planned upkeep, careful restoration or the replacement of a single affected component during a rebuild. For collectors and model builders maintaining a specific 56019 vehicle, a dedicated spare like this keeps the process focused on the exact part needed for the job. Warning! Not suitable for children under 14 years.
Basic accessories
U Parts Mirror Whiper S770, model parts sprue
319225228€13.29
U Parts Mirror Whiper S770 is a molded parts sprue for vehicle model building, bringing mirrors, wiper-style elements and trim details together in one clearly arranged frame. The black injection-molded runner keeps each component attached and visible until the moment of removal, which helps with part handling and visual checking at the workbench. The sprue layout shows multiple numbered positions and a mix of shapes that support exterior detailing and small assembly steps. Paired mirror-style parts, long narrow bars, rectangular inserts, compact brackets and fine rod-like pieces create a concentrated set of fittings rather than a broad mixed assortment. This kind of grouped runner is useful when a build calls for matching left and right details, because the mirrored parts remain easy to compare before cutting. The black finish also suits trim areas that often need a dark base tone on scale road vehicle subjects. On the bench, the organized runner format helps sort the next steps before glue or paint work begins. It fits naturally into model preparation, detail replacement or careful restoration of a compatible build where small exterior fittings define the final look. Warning! Not suitable for children under 14 years.
Basic accessories
Volvo Cockpit L-Parts Bag, model accessory sprue
319115493€27.49
This Volvo cockpit L-Parts Bag supplies a focused set of interior components on one white molded runner, giving a model build the cabin structure that shapes the look through the windows and across the dashboard line. The sprue format keeps each piece attached until preparation begins, which helps with part handling before trimming, painting and final placement. The visible parts include 2 front seats, 2 rear or lower seat sections, a steering wheel, a steering column or dashboard control unit, small trim or switch pieces, mirror-like details and a larger interior panel section. That mix supports work on the seating area, driving position and instrument zone rather than only one isolated section of the cabin. The unpainted finish suits custom paint application, panel detailing and careful matching to the rest of the vehicle interior. For restoration work, the grouped layout also helps compare shapes and placement before assembly starts. On the bench, this parts bag fits naturally into detail-focused model work where interior definition matters as much as the outer body. It suits replacement use on an existing build, completion of a missing cockpit section or a fresh project that calls for clearly molded cabin parts with a Volvo designation.
Basic accessories
Volvo FH12 Globetrotter sticker set for RC truck
309495346€8.99
This sticker sheet is made for the Volvo FH12 Globetrotter 420 and gives a 1/14 RC tractor truck the printed details that turn painted body panels into a recognisable road-going cab. Large Globetrotter lettering, FH12 badging, 420 marks and VOLVO emblems define the truck's identity across the exterior, while smaller graphics fill in the trim that would otherwise remain plain. Inside the cab, the sheet adds dashboard instruments, switch markings, vent graphics and wood-tone console details. These printed elements help the interior read as a working truck cockpit rather than a simple shell, especially through the windows and at close viewing distance. The sheet also carries grille textures, warning and marker light decals, reflector-style graphics, ON and OFF labels and registration markings such as PED 627, giving multiple areas of the model their own visual function. Used during the finishing stage, the decals support careful placement on bodywork and interior surfaces to sharpen the scale impression of the completed truck. They suit replacement work on an existing build or detail restoration on the Volvo FH12 Globetrotter 420 where original markings are missing, worn or incomplete. Warning! Not suitable for children under 14 years.
Basic accessories
Volvo sticker bag, model decal set for RC truck
319495998€38.99
This decal set brings the Volvo FH16 750 heavy rescue look to an RC truck body with bold HALL'S TRUCK RESCUE graphics, 24h SERVICE markings and large red and white hazard stripes. The printed sheet also carries VOLVO name decals, FH16750 identifiers and a wide mix of warning labels that sharpen the workshop and roadside assistance theme across the finished shell. Beyond the main livery panels, the sheet includes black trim pieces, grey accent stripes and smaller utility markings that help define body lines, panel edges and equipment areas. Alphabet rows and number rows support custom registration-style details or matching fleet markings. Labels such as DO NOT LIFT! and warning graphics add the kind of operational text often seen on full-size recovery vehicles, giving the model a more technical and believable appearance. The mix of large side graphics and small service labels allows broad visual changes without repainting every detail. Applied to a rescue truck build, the decals help turn plain body panels into a service vehicle with a clear working identity. They also suit a refresh of an existing shell where worn markings need replacement or where a new livery direction is planned around a Volvo heavy recovery theme.
Basic accessories
Volvo Sticker Bag, model decal set for scale kits
319495961€24.99
This Volvo sticker bag supports the finishing stage of a scale model with printed markings designed for visual detail rather than structural assembly. Applied after paintwork or onto a prepared surface, the decals help bring body sections, panels and graphic areas into a cleaner, more defined final look. As a dedicated marking set, it concentrates on the details that often complete a build's identity: lettering, logos and surface graphics. That makes it useful for replacing missing decals, refreshing an older model, or completing a project that needs Volvo-specific graphics. The compact format also keeps the focus on precise placement work, where alignment and spacing shape the finished appearance of the shell or matching model section. For restoration tasks, a separate decal set can save an otherwise finished build from mismatched or incomplete markings. On the workbench, this set fits naturally into paint and finishing sessions where visual accuracy matters as much as the main construction. It also serves as a practical spare for later touch-ups, rebuilds or second-body projects that need the same graphic theme carried through consistently.
Basic accessories
W-Parts Wheel Housing 56318 Model Accessory
309225095€10.79
W-Parts Wheel Housing 56318 is a dedicated model accessory for compatible Tamiya applications, centered on a defined replacement part rather than a general-purpose add-on. The black molded piece presents a structured housing form with visible fixing points, supporting a clear mechanical role within the matching assembly. The component layout shows a shaped body with integrated mounting areas and connection points that guide placement on the intended model. This kind of spare part is useful when a worn, damaged, or missing section needs to be exchanged while keeping the rest of the build in service. The formed structure helps maintain the original layout of the compatible assembly, and the compact single-part design keeps handling direct during fitting. Its purpose is specific: restore the matching section with the correct designated part instead of adapting an unrelated piece. In workshop use, W-Parts Wheel Housing 56318 fits naturally into repair, upkeep, or restoration sessions for an existing model. It also works as a practical reserve part to keep on hand for later maintenance when a compatible build needs the correct housing replaced. Warning! Not suitable for children under 14 years.
Basic accessories
Wheel Hub, spare part for 58080, 2-piece set
309805337€6.19
This 2-piece wheel hub set is made for 58080 and provides the exact component group needed at the wheel mounting point. The hex outer profile and splined inner opening show the mechanical interface clearly, helping the hub seat on the matching axle while giving the wheel a defined drive connection. The 2 identical parts suit replacement on both sides of the same axle area or as spares kept ready for maintenance. The silver-toned top faces and darker metallic sides visible on the parts reflect a compact, functional design shaped for model hardware rather than decorative trim. As small drivetrain fittings, wheel hubs matter where rotational force passes from axle to wheel, so a cleanly matched pair helps keep repair work consistent on the specified chassis. These hubs fit naturally into routine bench work such as rebuilding a used model, replacing worn running gear parts or preparing 58080 for its next session. In a parts box or on the work surface, the pair gives a straightforward way to complete a repair with components intended for the named model. Warning! Not suitable for children under 14 years.
Basic accessories
Windshield Parts for M-B Arocs Model Truck
319115460€14.99
This S Parts windshield set for the M-B Arocs / 56352 adds the distinct cab glazing needed to complete or refresh a scale truck build. The transparent dark-smoke finish gives the window areas a deeper, more realistic appearance, while the molded shapes follow the contours of the cab for a clean fit within the intended body layout. The sprues carry several separate glazing sections rather than a single panel, including a broad front screen, side window pieces and a long curved upper section. That layout supports careful trimming from the frame and makes the parts easy to sort before installation. As replacement-style model components, these pieces are useful when restoring a previously built truck, correcting damaged glazing or preparing a custom finish with matching tinted windows across the cab. On the bench, the dark-smoke parts stand out clearly against painted body panels and help define the front profile of the M-B Arocs. They also suit rebuild projects where original clear sections are missing or marked, keeping the truck's window areas visually consistent during repair or rework. Warning! Not suitable for children under 14 years.
Electronic
Winker/R J23/24, LED spare part for model trucks
307175114€12.49
Winker/R J23/24 is an LED spare part for model applications that use a matching lighting setup, combining 2 clear lamp ends with twisted blue and yellow wires in one compact replacement assembly. The flexible lead format helps when routing the wiring through confined sections of a body shell or existing light mount, where loose placement and clean cable guidance both matter. The part is described as MFC LED Winker/R J23/24, indicating use within a defined lighting configuration rather than as a general universal lamp. The bundled wire section keeps the 2 leads together along most of the run, while the separated lamp ends allow placement at 2 individual light points. This makes the part suitable for repair, maintenance or restoration work on a compatible scale vehicle with existing indicator positions. Batteries are not included. In workshop use, the assembly can replace a worn or missing lighting lead while preserving the visual function of fitted lamp locations on a model truck. It also suits parts storage for ongoing maintenance of vehicles that already run the corresponding J23/24 lighting arrangement. Warning! Not suitable for children under 14 years.
Basic accessories
X-Parts Couplerplate 56314, model parts set
300225105€12.29
X-Parts Couplerplate 56314 is a molded parts set for model repair, replacement and assembly work. The black injection-molded frame holds several technical components in one connected sprue, making it easier to identify each shape before separation and installation when a matching couplerplate section is needed. Visible on the frame are multiple numbered parts, a larger circular housing-style piece with screw holes, a square box-like casing with corner holes, and several smaller lever, bracket, latch or mount-style forms. This layout supports careful handling during workshop use because each component remains attached until the required step in the build or repair process. The molded numbering helps distinguish individual pieces, while the varied shapes indicate use in a mechanical or structural area rather than as decorative trim. The set suits model benches, spare-parts storage and restoration projects where a damaged or missing section calls for the correct molded geometry. It can also serve ongoing maintenance work by keeping replacement parts ready in one organized frame until trimming and fitting begin. Warning! Not suitable for children under 14 years.
Basic accessories
Y-Parts Bag Rear Fender, model spare parts set
319225196€27.49
This spare parts set centers on rear fender components for a compatible Tamiya model build and supplies 2 matching pieces for the rear body area. The molded parts are arranged on sprues, which keeps each section organized before trimming and fitting during a repair, rebuild or parts replacement task. The visible layout combines large curved fender sections with smaller mounting and connector parts, indicating that the set supports more than a single outer panel alone. Box-shaped panels and bracket-like elements in the same molded frame help maintain the intended fit and structure around the rear section where adjoining body parts meet. The black finish makes edges, contours and part separation lines easy to read at the workbench when checking orientation against the existing build. This kind of replacement set suits projects where original body sections are damaged, incomplete or missing and the rear area needs the correct shaped components again. Used as a refresh for an older model or as a practical stock part for future maintenance, the set supports tidy restoration work on compatible vehicle builds. It also fits organized hobby benches where spare molded sections are kept ready for body repairs and ongoing assembly work.
Basic accessories
Y-Parts Bag, model parts set with 2 sprues
319225186€37.49
The Y-Parts Bag supplies 2 matching sprues of black injection-molded components for model vehicle assembly, replacement and maintenance. The layout shown on each frame makes it easy to identify corresponding left and right pieces before removal, which helps keep rebuild work orderly when a chassis needs fresh hardware sections. Across the sprues, the molded selection includes curved bumper-like sections, rod-shaped connectors, bracket pieces, mounting plates and hub or steering-knuckle style forms. This mix supports targeted replacement rather than broad guesswork, especially when a build needs one specific frame area restored with the correct matching geometry. Because the parts remain attached to the sprue until use, each shape stays clearly separated during preparation and sorting. The duplicated Y frames also help when the same component is needed on both sides of a vehicle. On the workbench, this set suits planned rebuilds as well as quick repairs after wear or breakage. The organized frame format supports careful cutting, checking and fitting, whether the goal is restoring a running model or preparing spare sections for later workshop use.
Basic accessories
Y-Parts Rear Fender, model parts set, black sprue
300225182€31.49
Y-Parts Rear Fender 56323 supplies a focused set of body components for model vehicle assembly, centered on rear fender elements and matching exterior sections. The black molded sprue keeps the parts grouped in a single frame, making it easier to identify each section before removal and test fitting. Ribbed curved guards, flat side pieces and smaller joining elements create a technical look that suits utility-style bodywork and adds visible structure to the finished build. Beyond the main fender sections, the frame also carries box-shaped housings, support pieces, hinge-like details and a curved bar component. The preformed shapes and mounting holes give each section a clear placement role during assembly, helping the body layout come together with cleaner alignment than scratch-built parts. Because the parts are molded in black, the set already matches darker body sections and can also serve as a solid base for further finishing where the build calls for paint. The arrangement on the sprue keeps small components together until needed, which helps maintain order across longer bench sessions. This set suits repair work, replacement of worn body sections, or a fresh build that needs the specified rear fender group. On the workbench, the different panel shapes and brackets support careful trimming, dry fitting and final mounting as the exterior takes on a more complete truck-style form. Warning! Not suitable for children under 14 years.
Electronic
1:14 RC Light Unit Trailer, trailer light set
300056502€56.49
The 1:14 RC Light Unit Trailer expands a semi-trailer model with working rear lighting that responds through functional blinkers and brake lights. Combined with the Tractor Truck Electrical Unit Set or a Multi-Function unit, the set gives a truck and trailer combination a more convincing operating look while drawing power from the truck's running battery. The set is built around a semi-trailer connector cable, light bulbs and an internal circuitry board connector cable. This layout is designed for installation on the semi-trailer without complicated wire connecting chores, keeping the wiring path more straightforward inside the model. The included harness routes the lights to the rear positions for taillights, left blinker, right blinker and brake lights. Mounting hardware shown in the set supports the connector installation on the trailer body, and the lighting system is intended specifically for 1:14 scale RC truck use. Once fitted, the trailer lighting adds a more active visual presence during driving sessions, especially when the truck is braking or indicating through turns. The set is not compatible with Carson trailers. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Tractor Truck Driver Figure, assembly figure
300056536€13.49
This 1:14 Tractor Truck Driver Figure brings a seated driver into the cab of a scale tractor truck, adding a clear sense of occupancy and proportion to the finished display. As an assembly figure, it is designed for model builders who want the interior to read as a working vehicle rather than an empty shell. The figure was originally included with the Grand Hauler and is now offered as a separately sold option part for compatible 1:14 tractor truck builds. The set contains 1 figure parts set with separate head, arms, body and lower leg sections that are assembled before installation. The head angle can be set as desired, and the instructions indicate that arm position, leg fit and some body areas may need adjustment depending on the cab interior. Double-sided tape or cement is used for attachment, and fit should be checked so the figure does not obstruct cab or body removal. Inside a finished truck cab, the seated pose works naturally with dashboard, seat and steering wheel layouts to strengthen the scale impression in display scenes. It also suits custom projects where builders want to tune the driving posture and placement to the interior space of a specific tractor truck model. Warning! Not suitable for children under 14 years.
Electronic
1:14 Motorized Support Legs, trailer RC accessory
300056505€114.99
The 1:14 Motorized Support Legs add powered trailer support to a compatible RC truck setup, turning a static parking function into a working mechanical feature. Through a 4-channel radio system, the legs can be lowered to support the trailer and raised again for travel, giving coupling and uncoupling scenes a more technical, hands-on character. The mechanism uses retractable leg motors mounted under the trailer, with power supplied by 4 AA batteries that are required separately. A servo is also required separately. Alongside radio operation, the assembly includes a manual lever function that raises or lowers the supports directly on the trailer. The instruction set shows the support system working with both tanker trailer and semitrailer layouts, and the operating sequence also covers unhitching by extending the legs, releasing the coupling, and moving the truck forward in a straight line. This accessory suits builders who want more function in a 1:14 truck scene, whether the trailer is parked for display, prepared for loading, or separated from the tractor unit during operation. The powered movement of the landing legs adds visible mechanical action to workshop setups, depot scenes, and road transport layouts while keeping the focus on authentic model-truck handling. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Hub Nuts for Single Wheels, RC truck accessory
300056556€22.99
These 1:14 Hub Nuts for Single Wheels bring a more authentic truck finish to visible wheel hardware on Tamiya R/C truck builds. The black parts are shaped to echo the look of full-size vehicle hub nuts, so the axle ends gain a more realistic scale appearance once fitted to compatible wheels. The set provides 2 Hub Nut A parts and 2 Hub Nut B parts, plus small attachment parts for installation. They are intended to replace the kit-standard 4 mm flanged nuts on compatible assemblies rather than changing the wheel system itself. The instruction sheet shows different wheel mounting layouts, including wheels that do not require a hub collar, wheels that do require a hub collar, and hex hub wheel setups. On some wheels, fit depends on the wheel center diameter, with guidance shown for about 13 mm openings and for 16 mm and above. Grease and synthetic rubber cement are referenced in the instructions as sold separately where required by the wheel type. This accessory suits detail-focused finishing on 1:14 R/C truck front wheels and single rear wheels, especially where exposed fasteners are part of the visible scale look. It works well during a wheel refresh, a custom build, or a visual upgrade that focuses on the small mechanical details around the hub area. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 Tractor Truck Oil Shock, damper set, blue
300056503€35.99
This 1:14 Tractor Truck Oil Shock set adds 2 blue oil dampers to compatible Tractor Trucks and Trailers, bringing a more technical suspension layout and a crisp visual accent to the chassis. The oil-filled construction works through internal shafts and seals, so movement is guided by fluid damping rather than by a simple dry mechanism alone. The set is supplied as a 2-piece damper kit and is shown with damper oil plus small suspension hardware such as O-rings, clips and rod-end style parts for assembly. The blue aluminum cylinders give the shock units a machined look that stands out against darker chassis parts, while the compact format suits detailed 1:14 scale truck builds where visible running gear matters. As an accessory for model suspension tuning, this set focuses on the damping unit itself rather than on cosmetic add-ons. Mounted on a truck or trailer chassis, the pair can complement scale-focused builds that place the suspension in clear view around the axles and frame. The set also fits workshop-style upgrade projects where builders refine a 1:14 rig with dedicated damper components and matching blue hardware. Warning! Not suitable for children under 14 years.
Tyres
1:14 Tractor Truck Tire, spare tire set, 22mm
300056527€12.19
This 1:14 Tractor Truck Tire set brings a focused handling change to Tamiya tractor trailer trucks through a simple but specific component choice. The 2 hard compound rubber tires measure 22 mm and are intended for 1:14 scale applications, where the firmer material changes how the trailer responds as the combination enters and exits a corner. On the front of a trailer, the hard compound helps counter over-steer and rear sliding, giving the articulated setup a more composed line through bends. On trailer axles, the same lower-traction characteristic supports smoother cornering, which can be useful when tuning a truck for different surfaces or driving styles. The molded sidewall and tread detailing also match the scale look expected on working truck models, so the tires contribute visually as well as mechanically. The set can also be used with double-tire trailers, adding another fitting option for multi-axle layouts. In workshop use, these tires suit routine replacement as well as setup changes before a driving session. They fit naturally into fleet maintenance for 1:14 tractor trailer models, especially when a trailer needs a more stable response in sweeping turns or tighter corner sections. Warning! Not suitable for children under 14 years.
Basic accessories
1:14 TT Matte Plated Gearbox, truck model part
300056539€15.79
The TT Matte Plated Gearbox brings a more authentic finish to 1:14 R/C tractor truck builds by replacing the standard gearbox housing look with matte plated B parts. The subdued metallic surface changes the visual character of the transmission area, giving the chassis a more scale-driven appearance when viewed from the side or underneath during display. This set is intended for Tamiya 1:14 scale R/C tractor truck models and focuses on the gearbox section rather than the full body. The paired housing pieces are shaped as matching left and right halves, with moulded structural lines, curved end sections and screw mounting points that suit precise placement during assembly. The plated treatment highlights the contours of the casing and helps the gearbox area stand out alongside other truck detailing parts. As an accessory part for an existing model, it is aimed at builders refining finish and realism on a compatible truck platform. On a workshop bench, during a rebuild, or as part of a visual upgrade before shelf display, these parts give the drivetrain zone a more finished look. Combined with other scale detailing on a 1:14 tractor truck, the matte plated housing helps the mechanical section read more like a full-size truck component.
Basic accessories
1:14 6x4 Truck Ball Bearing Set, model accessory
300056560€44.99
This 1:14 ball bearing set is matched to all Tamiya 3-axle tractor trucks in 6x4 configuration and brings the full bearing count for one coordinated service pack into a single model accessory. With 30 pieces in 3 sizes, it supports precise installation at the truck's rotating points where clean, low-friction movement matters most. The size mix is stated clearly in the set itself: 27 bearings measure 5 x 11 mm, 2 bearings measure 6 x 12 mm, and 1 bearing measures 5 x 8 mm. That distribution reflects the different mounting positions used across a 3-axle truck layout and avoids piecing together separate size packs. Each bearing is a sealed ball bearing with 2 seals, giving every unit the same construction standard across the set. The metallic bearing format suits maintenance, replacement, or a planned rebuild where matching dimensions are required. On the bench, the pack supports systematic work on a 1:14 truck by keeping the required bearing sizes together and ready for the next assembly or service step. It also suits keeping a dedicated spare set for a regularly used 6x4 tractor truck, where exact fit and a complete count matter more than improvising with mixed loose parts.