Volvo model car

RC trucks

1:14 FH16 Timber Truck, RC assembly kit, 3-speed

€679.99

The 1:14 FH16 Timber Truck is an RC assembly kit built around the long-bed timber hauler layout, with a detailed ABS cab, upright stakes and a full-size truck stance across 733 mm length, 194 mm width and 306 mm height. The Volvo FH16 Globetrotter form is recreated with a photo-etched grille, interior cab details and a rear section shaped for log transport styling. Its chassis follows a ladder-frame construction with aluminum side channels and resin cross members, while a front-mounted motor sends drive through a metal propeller shaft to the rear axles. Each rear axle uses its own metal differential, and the suspension combines metal leaf springs with friction dampers for a mechanical layout that closely reflects the full-scale vehicle. The rear bed uses reinforced resin and metal parts for the stakes and tailgate, and new rear tyres with off-road tread add a more purposeful forestry-truck look. The cab is screwed in place and removable, and space behind the seats allows installation of the separately available MFC-03 multifunction unit. On the bench, the model offers a build centered on truck engineering details rather than a simplified shell-over-chassis format. Once assembled, the 3-speed transmission brings a more involved driving rhythm, especially on longer runs where shifting changes the truck's pace and character. A 4-channel radio system, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

Tamiya RC Volvo Bundle

Product bundle consisting of: 1:14 RC EU Truck Volvo FH12 Globe.420 Ki / 1/14 Tractor Truck Driver Fig. / TS-47 Chrome Yellow Gloss 100ml Article number: 300056312 Product: 1:14 RC EU Truck Volvo FH12 Globe.420 Ki Tamiya is delighted to announce that this classic is once again to be produced, returning another big name to the 1/14 Scale Tractor Truck Series. The R/C model was first released back in 2000 and recreates the Volvo FH12, a huge-selling vehicle with 12-liter turbocharged "Euro 2" engine that won the Truck of the Year in 1994. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Article number: 300056536 Product: 1/14 Tractor Truck Driver Fig. Add a whole new level of realism to your 1/14 scale tractor truck with this assembly figure, which was originally included in the Grand Hauler (Item 56344). It is now available as a separately-sold Option Part. Figure Parts x1 Can be attached with double-sided tape, or cement. Note that some models may require modification of figure for attachment.   Warning! Not suitable for children under 14 years.

RC trucks

1:14 Volvo FH12 Globetrotter 420, RC truck kit

€389.99

The Volvo FH12 Globetrotter 420 arrives here as a 1:14 R/C model assembly kit with the tall long-haul cab shape captured in full scale-model form. At 440 mm long, 188 mm wide and 295 mm high, the truck has the stance of a European tractor unit, with the high-roof Globetrotter profile giving the build a clear visual identity on the bench and in motion. Its 272 mm wheelbase sets the proportions for a chassis built around a ladder frame with aluminum side channels, a layout that reflects the structure of a working truck. The front-mounted motor sends power to the rear axle, and the mechanical arrangement gives the underside real substance during assembly as the drivetrain takes shape. A 3-speed transmission brings another layer of control once the model is running, with gear changes handled through a 4-channel R/C setup. The included coupler opens the truck to trailer operation and allows connection with currently available 1:14 Tamiya trailers. Radio gear, a battery pack and a charger are required separately. During a slow pass across smooth ground, the metal leaf springs and friction dampers make the suspension detail easy to appreciate, especially when the chassis settles under direction changes. The finished truck suits display just as naturally, where the FH12 cab lines, wheelbase and tractor layout give the model the look of a classic long-distance hauler.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Volvo FH16 Tow Truck 8x4, RC assembly kit

€1,094.99

The 1:14 Volvo FH16 Tow Truck 8x4 brings heavy recovery hardware into Tamiya's R/C truck range with a long 750 mm chassis, a 195 mm width and a 300 mm height that give the model a commanding road presence. Its detailed cab captures the FH16 shape with molded resin parts, interior features and a photo-etched grille, while the 8x4 layout and recovery body create the look of a full-size heavy tow vehicle built for disabled tractor trucks. Under the body, the ladder frame combines aluminum side channels with resin cross members, and the front-mounted motor drives the 2 rear axles through a propeller shaft. Metal leaf springs, friction dampers, a float-mounted die-cast front axle and reinforced resin rear axles shape the running character, while differential gears in each rear axle help the truck track smoothly through bends. The rear towing section is designed around boom and underlift mechanisms, and it can be operated by radio control when the separately sold Actuator Set 56553 is installed. Headlights and taillights can also be illuminated with separately sold LEDs, and the chassis is compatible with the separately sold MFC-03 multi-function control unit. As an assembly kit, this model suits bench sessions focused on scale detail as much as driving time on the floor or a paved layout. The long wheelbase, multi-axle stance and working transmission give the truck a distinct presence in convoy driving, display scenes and recovery-themed setups. Radio gear, a battery pack, a charger and LEDs are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Volvo FH16 Tow Truck, RC model kit, 8x4

€1,199.99

The 1:14 Volvo FH16 Tow Truck model kit brings a heavy recovery truck format to the workbench with an 8x4 chassis, 4 axles and a steerable double front axle. At 750 mm long, 195 mm wide and 300 mm high, the finished truck has the long, purposeful stance of a full-size tow vehicle, with silver pre-painted cab parts that give the bodywork a clean, uniform finish early in the build. The construction combines an ABS body with an aluminium ladder frame and detailed running gear. Power comes from a front-mounted 540 electric motor and reaches the 2 rear drive axles through a metal cardan shaft, while 2 differentials support smoother cornering. Detailed metal leaf springs and friction dampers shape the suspension layout, and the 3-speed manual transmission can be controlled through suitable radio equipment. The rear crane structure is built with many metal parts, and turnbuckles with chains are supplied for load securing detail. Radio gear, a battery pack, a charger and a servo are required separately. An optional ACU unit is required separately for crane movement. Photo-etched radiator grille parts, chrome rims and the visible cab interior add scale character across display and running sessions. The permanently bolted driver's cab leaves space behind the seats for installation of a multifunction unit, keeping the interior visible while supporting an expanded electronics layout. The tow truck can pick up and tow 1:14 scale model trucks, opening up recovery scenes, depot setups and convoy support runs.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Volvo FH16 XL 750 4x2, RC assembly kit

€484.99

This 1:14 RC assembly kit recreates the Volvo FH16 Globetrotter XL 750 4x2 Tractor as a large-scale road truck with a commanding cab shape and full-bodied presence. At 462 mm long, 193 mm wide and 309 mm high, the model brings the FH series flagship proportions onto the bench and onto the road, with the Globetrotter XL roof profile giving the silhouette its unmistakable long-haul look. The cab uses precise injection-molded parts, and the front grille is rendered with photo-etched detail for a sharper finish at the nose. Interior parts such as the dashboard and seats are included, and a 1:14 scale driver figure adds another layer of realism inside the cab. Customized sections for the exterior are also supplied, including the roof bar, low bar and side bars, so the build can lean into the high-spec tractor-truck style shown by the full-size vehicle. The model is also compatible with Tractor Truck Option Parts for further tuning. On the move, the rear-axle-drive 4x2 layout and front-mounted drivetrain echo the construction of the actual truck. The assembly can be paired with the separately available Multi-Function Control Unit MFC-03 for light, sound and vibration functions. Radio gear, a battery pack, a charger, 2 servos and the Multi-Function Control Unit are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Volvo FH16XL Set, RC truck kit

This 1:14 Volvo FH16XL set brings RC truck building into a large-format scale model with a clearly named FH16XL cab and the MFC03/KO MC-8 version listed in the supplied data. The scale gives the truck presence on the bench and on the floor, while the kit format turns the model into a focused assembly project rather than a ready-made vehicle. The supplied designation points to a specific set configuration, which helps separate this release from other RC truck variants in the range. Assembly time is stated in minutes in the source data, but no exact figure is provided, so the build is best understood as a staged project built around the included set identity rather than a quick setup. Batteries are not included. Radio gear, a battery pack and a charger are required separately. The source data also identifies this as a powered vehicle within the radio or remote control ground category, placing it firmly in the RC truck field. On a workbench, the 1:14 scale and FH16XL naming support a model that suits careful assembly, finishing and setup. Once completed with the separately required running equipment, the truck fits controlled indoor driving sessions, shelf display between runs, and collection alongside other scale transport models.  Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Aero-parts 56375, model parts set

€16.99

Aero-parts 56375 brings extra exterior shaping to a 1:14 model build with molded white parts arranged on a sprue, ready for clipping, cleanup and fitting during assembly. The set centers on curved body panels and formed outer sections that give a project more defined surface contours while keeping the work focused on precise placement and finishing. The visible parts layout includes 2 larger curved rectangular panels, several smaller shaped sections and a slim rod-like piece, offering multiple elements for bodywork detailing within one frame. Because the components remain attached to the sprue at the start, sorting and checking each section against the build stays straightforward before any trimming begins. The white finish also makes panel edges, cut points and surface preparation easier to see during sanding, test fitting and paint planning. As a model parts set rather than a complete vehicle kit, the emphasis stays on exterior add-on work and accurate integration with an existing scale project. On the bench, these pieces suit careful body customization, replacement work or detail upgrades where shaped outer panels change the look of the finished model. In a truck or trailer display build, the added sections help create a more complete body profile once assembled and finished.  Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Antenna/Fitting Parts, model spare parts

€22.69

This 1:14 spare parts set provides antenna and fitting components for compatible model builds and keeps replacement work focused on the exact part group named in the set designation. The moulded black sprue format holds multiple pieces in a single frame, making it easier to identify, separate and prepare the required components during a repair or rebuild. The visible layout includes rod-like elements, ring-shaped parts, bracket forms and flat mounting pieces, all produced as injection-moulded components for model use. That arrangement supports careful parts selection when a build needs matching fittings rather than a full new kit. The set is described as R Parts Antenna/Fitting parts 56375, which places it clearly in the spare-parts and maintenance side of the hobby. Because the parts remain attached to the runner before use, each shape stays easy to compare against the needed replacement during workshop preparation. On the bench, this kind of set suits planned restoration, damage replacement or completion of an unfinished compatible model where small external or mounting details are missing. It also fits organised spare-parts storage, since the grouped frame keeps the component family together until the required pieces are removed for assembly.  Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Clear Parts 56375, model parts set

€10.99

Clear Parts 56375 is a 1:14 model parts set for builders who need transparent components for a compatible scale project. The injection-molded runner holds several shaped sections in one organized layout, making it easier to separate, prepare and position each piece during detailed assembly work. The set is suited to replacement, restoration or finishing tasks where clear sections matter to the final look of the build. Smaller rounded details sit alongside longer narrow elements and larger panel-style pieces, giving the sprue a mix of forms for careful cutting and fitting. The transparent material supports paint masking, edge finishing and neat placement where visible surfaces need a clean result. Because the parts remain attached to the frame before use, each section stays easier to sort and handle at the workbench. On a repair project, the set can help return a model to a complete appearance after wear or damage. During a fresh build, it supports a more exact finish when the transparent sections are fitted after test placement, trimming and surface preparation. The 1:14 scale keeps the set aligned with matching model applications where accurate part fit is essential.  Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Fuel Tanks Q Parts, model parts set

€29.79

This 1:14 scale Q Parts set supplies fuel tank components for model truck building, repair and restoration work. The black injection-molded runner groups the parts in one frame, making it easy to identify matching sections before cutting, fitting and finishing them into a compatible build. Visible on the sprue are several curved cylindrical shell sections, a large rectangular side panel with circular detailing, 2 short tube-like connector pieces, a flat bracket-style centre piece, a rectangular cover panel, 2 round cap-like discs and smaller detail parts. That mix supports more than a single surface change: it gives the tank area its main volume, closure points and mounting-related details. The molded format also helps keep small pieces organised during bench work, especially when replacing worn parts or completing an unfinished truck project. On a workshop table, the set suits careful rebuilds, parts replacement and scale detailing where matching tank shapes matter to the finished look. It also fits stash planning for hobby builders who keep specific replacement runners ready for future maintenance on 1:14 truck models.  Warning! Not suitable for children under 14 years.

Other accessories

1:14 Highroof 56375, model parts, cab section

€28.99

Highroof 56375 brings a 1:14 cab section into truck model work with unpainted molded parts that show the main front body shape, a rectangular window opening and defined exterior panel lines. The sprue layout keeps the individual sections organised during preparation and helps separate the main shell from the smaller trim elements before fitting and finishing. The set centres on the upper cab area and front face rather than a complete vehicle, making it suited to replacement work, restoration projects or a custom body configuration built around a high-roof truck look. Separate curved front pieces add another construction stage at the nose of the cab, where alignment and surface preparation shape the final appearance. Molded attachment points support placement of the parts during assembly, while the plain white finish leaves the surfaces ready for primer, paint and detailing matched to the chosen model scheme. On the bench, the parts support measured trimming, dry fitting and paint planning before final installation on a compatible build. In a workshop setup focused on truck models, the 1:14 scale and cab-specific form make this set a practical basis for replacing worn body sections or developing a different front-end style.  Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Lightbar 56375, model accessory parts

€21.49

Lightbar 56375 brings extra scale detail to a 1:14 model build through a dedicated accessory set of black moulded parts supplied on sprues. The format suits builders who want to add a defined exterior element during construction and integrate it cleanly into the overall look of a truck project. The set is presented as model accessory parts rather than a finished assembled unit, so the build process includes cutting the components from the sprue and fitting them in place on the chosen model. The visible part shapes point to a lightbar-style assembly with mounting elements and structural pieces that support a technical, workshop-inspired appearance. The black finish keeps the parts visually neutral, making them easy to combine with different paint schemes and body styles within a 1:14 scale setup. This kind of accessory set fits naturally into custom builds, restoration-style projects or detail-focused display models where added exterior equipment changes the character of the vehicle. Used during assembly, the parts help create a more equipped silhouette and give the finished model another layer of scale presence without changing the core function of the base build.  Warning! Not suitable for children under 14 years.

Basic accessories

1:14 Lightbar Insert Clear 56375, model part

€11.29

This 1:14 lightbar insert clear 56375 is a model part for detailed scale vehicle work, supplied as a transparent molded piece on a sprue. The clear finish supports the intended lens appearance on compatible builds, while the compact runner layout keeps the part protected and easy to identify at the workbench. The image data shows multiple small transparent sections attached to a rectangular frame, indicating a precision-molded replacement or finishing component rather than a complete vehicle kit. The marked sprue format helps keep the part stable before removal, which suits careful trimming and staged installation during a repair, refresh, or ongoing custom build. Its role is focused and specific: restoring a missing insert, replacing a worn section, or completing a scale lighting detail where the original clear element is required. On a hobby bench, this kind of clear insert fits naturally into maintenance sessions, rebuilds, and detail upgrades for compatible 1:14 assemblies. It can be prepared alongside other body components, then fitted when the lightbar area is ready for final finishing and visual alignment.  Warning! Not suitable for children under 14 years.

Basic accessories

1:14 T Parts Exhaust/Antenna, model parts set

€17.79

This 1:14 T Parts Exhaust/Antenna set supplies a dedicated group of molded components for scale truck model assembly, with black and gray pieces arranged on sprue frames for clear identification and controlled removal at the workbench. The layout keeps related shapes together, which helps when matching each part to its position during a repair or a fresh build. Visible forms in the set include larger curved sections, a long ribbed piece, a wedge-shaped panel, a rectangular housing-like part, and smaller clips, brackets and washer-like details. That mix supports both structural placement and finishing work in the same assembly area, so the set can serve as a direct replacement source or as a way to restore missing details on an existing model. Because the parts remain attached to the runner before use, sorting stays orderly until each piece is needed. On the bench, the set suits careful trimming, test fitting and step-by-step installation into the designated Exhaust/Antenna section of a 1:14 truck model. It also fits stash planning for ongoing workshop projects, where having the correct molded part group ready can shorten interruptions and keep detail work consistent across the build.  Warning! Not suitable for children under 14 years.

Basic accessories

1:14 U Parts Side skirts 56375, model parts

€29.49

U Parts Side skirts 56375 brings dedicated 1:14 scale body components into model building work where clean replacement sections or planned custom detailing matter. The white molded parts are supplied as unassembled model parts on a sprue, making the set easy to sort, cut and prepare at the bench before final fitting on the intended vehicle build. The layout shown on the frame groups several larger panel sections with smaller matching pieces, which helps keep preparation orderly during trimming and test fitting. The side skirt format focuses attention on the lower body area, where aligned panels can sharpen the finished outline of a truck or vehicle model. Because the parts arrive unpainted and unattached, the set leaves room for project-specific finishing choices and integration into an existing build plan. This makes the set useful both for replacing damaged sections and for continuing a detailed scale project with matching body elements. On the workbench, the sprue format supports a steady build rhythm, with each section remaining in place until the moment it is needed. During restoration, customization or staged assembly of a 1:14 model, these molded components add the specific body sections required for a cleaner and more complete result.  Warning! Not suitable for children under 14 years.