RC Gears & RC motor pinions
Always keep moving: discover our range of RC gears and motor pinions for your RC vehicles: for optimum power transmission and maximum performance on any surface.
RC Gears & RC motor pinions
Always keep moving: discover our range of RC gears and motor pinions for your RC vehicles: for optimum power transmission and maximum performance on any surface.
More
Gears & motor pinions
19T Pinion Gear, model accessory, M0.6
303505049€5.69
This 19T pinion gear is a compact drivetrain part for model applications that use module M0.6 gearing. Its 19 straight teeth mesh with the matching gear stage to pass motor rotation into the transmission, making it a functional choice when a specific tooth count is needed in the drive layout. The dark metal gear body is shaped for shaft mounting, with a central round bore and a side set-screw hole visible on the part. The top surface is marked with 19, which helps distinguish this version from other tooth counts during maintenance or parts sorting. As a small mechanical component, the pinion sits at the point where motor output meets the rest of the drivetrain, so the tooth count directly relates to the gearing combination used in the model. It fits naturally into workshop tasks such as replacing a worn pinion, restoring a compatible drivetrain, or keeping a matching spare ready for service intervals. On the bench, the compact form and visible marking make it straightforward to identify alongside other transmission parts and gearing options. Warning! Not suitable for children under 14 years.
Gears & motor pinions
20/21T Pinion Gear Set, RC motor accessory, aluminum
300050356€9.99
This 20/21T Pinion Gear Set is a compact drivetrain upgrade for compatible RC chassis, pairing 2 aluminum pinions with 2 grub screws for secure mounting on the motor shaft. The 20-tooth and 21-tooth options give a clear gearing choice when replacing worn parts or adjusting the drive layout for a specific chassis setup. The machined aluminum construction keeps the focus on precise tooth engagement and clean fitment in model drivetrains that use module 0.6 gearing. One pinion is marked 20 for quick identification during setup, which helps separate the two ratios at the workbench. The set is intended for a wide spread of Tamiya platforms including M-05, M-05 PRO, M-05 ver.II PRO, M-06, M-06 PRO, WR-02, WR-02G, WR-02CB, GF-01, GF-01TR, GF-01CB, G6-01, G6-01TR and TB-05 PRO. It also supports CC-01 with 20T only, plus TA06, TA06 PRO, TA06 MS and TC-01 with 21T only. Additional chassis-specific notes are defined for several applications: DF-02 is used with 53703, F104PRO II is used with 51609, and TA07 MS is used with 51356, 51423 and 51548. That makes the set a practical spare or tuning part for keeping compatible RC cars running with the correct motor pinion combination. Warning! Not suitable for children under 14 years.
Gears & motor pinions
39T Ring Gear XV-02/TT-02 GD, RC spare parts
300051695€6.39
This RC spare parts set centers on a 39T ball differential ring gear and a 15T bevel pinion gear for XV-02 and TT-02 chassis cars. The matched gear pairing supports the differential drive path where torque changes direction through the bevel teeth, making it a focused replacement choice for drivetrain maintenance on compatible models. Alongside the 2 gears, the set also provides a differential case and a gasket. That combination covers the main housing and sealing elements around the gear area, so service work can address more than a single worn tooth or damaged gear face. The square center opening on the bevel pinion and the mounting pattern on the ring gear are shaped for their intended assembly points, while the gasket sits between housing parts where a clean fit matters. As a dedicated spare parts pack, the set is aimed at repair, rebuild, or routine drivetrain upkeep rather than general customization. On the bench, these parts suit planned maintenance after repeated running sessions or a targeted differential rebuild on an XV-02 or TT-02 chassis car. The separate components also make it easier to replace the affected drivetrain section with matching parts from one set instead of sourcing each piece individually.
Gears & motor pinions
BB-01 48 Pitch Spur Gear 86T, RC spare part
300051714€4.59
The BB-01 48 Pitch Spur Gear 86T is a dedicated RC spare part for drivetrain setups that use a 48 pitch gear standard. Its circular toothed form and 86-tooth count define how it meshes with the matching pinion, making it a precise choice when a worn transmission part needs replacement or a specific gearing ratio is required for a build. This pack contains 1 spur gear. The part is intended for use with a 48 pitch pinion gear, so the tooth profile stays within the same pitch system across the gear mesh. That matters during maintenance and rebuild work, because matching pitch standards help the teeth engage correctly during rotation. The gear is shown as a molded component with a central mounting hole and reinforced face structure, details that support its role as a fitted mechanical part rather than a general workshop accessory. In practical use, the gear suits bench repairs, scheduled part changes and drivetrain refreshes on various R/C cars that accept this specification. When an RC chassis calls for an 86T spur gear in 48 pitch format, this part provides a direct, clearly defined replacement to keep the transmission setup on the intended gearing standard.
Gears & motor pinions
Bevel Gear Differential Set, RC spare part kit
300050602€5.99
This bevel gear differential set is a drivetrain spare part kit for selected RC chassis, built around the internal mechanism that distributes drive through a differential assembly. Supplied as a kit version, it provides 8 pieces for differential service on compatible platforms and suits repair work that focuses on the gear internals rather than the complete chassis. The set is specified for CR-01 and DT-02 chassis, making it a targeted choice when those platforms need matching replacement parts in the differential area. The included contents are 1 bevel gear differential set with 8 pieces. Studio imagery shows the internal layout clearly, with larger bevel gears, smaller mating gears, a 3-armed carrier and 2 flat washers or shims, all centered on the gear action inside the assembly. That component mix supports rebuilds where worn or damaged internal differential parts affect drivetrain function. In workshop use, this kind of set suits routine maintenance, repair after heavy running, or a planned refresh of the axle internals on a compatible chassis. It is not available for XB models, so the fit remains tied to the listed chassis platforms and their matching differential setup. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Bevelgear Set, model spare parts for drivetrain
319440510€5.19
This bevelgear set brings the key transmission parts needed for focused drivetrain maintenance on compatible model assemblies. The set contains 5 metal gears: 2 larger bevel gears with central bore openings and 3 smaller pinion-style bevel gears with short shafts. Their angled teeth are made to mesh at intersecting shaft positions, a layout commonly used to redirect rotary motion through a compact gearbox section. The combination of larger hub gears and smaller pinions supports replacement work where worn or damaged gear teeth can affect smooth running. Because bevel gears transfer motion across a change in shaft direction, they are suited to mechanical areas where drive needs to turn through an angle rather than continue in a straight line. The silver-gray metal construction gives each gear a clearly defined tooth profile and a technical finish that matches the functional role of these parts. Compatibility is stated for BB18, BB19 and BB20, with reference to 58618 Mt.Bee. On the workbench, this set suits planned servicing, targeted repair, or keeping essential transmission parts ready for a compatible model. The clearly differentiated gear sizes also help when matching the correct meshing pair during maintenance and reassembly. Warning! Not suitable for children under 14 years.
Gears & motor pinions
C-Parts Gearboxguard, model spare parts for CC-01
300005521€15.79
C-Parts Gearboxguard for CC-01 supplies replacement molded components for drivetrain and chassis-area service on a compatible model build. The black sprue format keeps the individual sections together until trimming, making it easier to identify the required shapes during a repair session at the workbench. The set is presented as model spare parts rather than a complete kit, with molded guard, housing and fastening-area forms visible on the frame. Ribbed detailing, screw holes and cylindrical mounting posts support the mechanical role of the parts once fitted into the existing assembly. Several circular pieces and hexagonal cap-like forms add further replacement coverage for the same component group, which helps when an older build needs targeted maintenance instead of a full parts change. This format suits rebuilds after wear, damage or disassembly, and it also helps keep a CC-01 chassis in running condition with matching replacement sections on hand. AreBatteriesIncluded is stated as false in the data, and no battery is included with these spare parts.
Gears & motor pinions
CC-01 G-Parts, spare parts set for 58132
309005422€17.29
CC-01 G-Parts for 58132 provide a focused spare-parts set for drivetrain service, centered on molded mechanical components used in rotational power transfer. The set brings together black injection-molded gear elements and related mounting parts that suit repair work on an existing compatible model. Visible components include multiple spur gears, bevel gears, a larger gear with an integrated vertical pinion, a round plate with screw holes, and additional small parts carried on a sprue frame. That combination points to gearbox or differential-related functions where meshing teeth, axle positions and cover placement all need to match the original layout. The larger geared part with integrated pinion supports a compact transfer step within the mechanism, while the bevel gear forms indicate angled drive movement inside the assembly. The round plate adds a fitted structural piece rather than loose hardware, helping restore the intended arrangement of the surrounding mechanism. On the bench, this set suits planned maintenance, wear-related replacement, or the completion of a drivetrain rebuild when original molded parts are no longer usable. It also works well as workshop stock for model owners who keep compatible mechanical spares ready for future service on 58132-based running gear. Warning! Not suitable for children under 14 years.
Gears & motor pinions
DB-01/TRF501X Spur Gear, RC spare part, 91T 48DP
300051314€6.99
The DB-01/TRF501X Spur Gear 91T 48DP is a dedicated RC spare part for compatible drivetrain setups, combining a 91-tooth count with a 48 pitch tooth profile for precise transmission matching during maintenance or repair. Built for use with the DB01 and TF503 chassis named in the data, it gives the drivetrain a clearly specified replacement component rather than a generic gear. The 91T layout determines the driven gear size within the transmission, while the 48DP format identifies the fine tooth pitch used for correct meshing with the matching pinion. That makes this gear relevant when restoring the original gearing arrangement on a compatible chassis after wear, damage or routine workshop service. As a model supply in the Models & Accessories range, it suits bench work focused on drivetrain upkeep rather than cosmetic changes. The listed designation DB-01/TRF501X also helps place the gear within specific RC platform families. In practical use, this spare part belongs in the workshop alongside other transmission service components for compatible off-road chassis builds. During maintenance sessions, it supports a straightforward parts swap that keeps the drivetrain specification aligned with the stated 91T 48DP format for continued running on the correct platform. Warning! Not suitable for children under 14 years.
Gears & motor pinions
DF-02 Metal Parts Bag A, model spare parts
309400152€30.49
DF-02 Metal Parts Bag A is a model spare parts set identified in the source data for 58328. The designation points to a defined replacement pack rather than a general accessory, making it a practical choice when an existing build needs the matching hardware group restored or completed. The stated metal construction gives this set a clear material identity, while the DF-02 naming keeps the part reference specific for workshop organisation. As a parts bag, it suits maintenance, repair and replacement tasks on a compatible build already in use. The source data places it in model supplies, which fits its role as a support component for an established model rather than a standalone vehicle or assembly kit. This also helps when sorting spares by platform and bag reference during bench work. On the work surface, a clearly named replacement pack saves time during upkeep because the part group is already narrowed to DF-02 Metal Parts Bag A for 58328. It works well as a stock spare for routine servicing, for completing an older build, or for replacing missing original metal components with the specified bag reference. Warning! Not suitable for children under 14 years.
Gears & motor pinions
DF-03 Gear Parts Bag, RC spare parts set
309400411€39.99
The DF-03 Gear Parts Bag for 58370 focuses on one of the most important working areas in an RC drivetrain: the differential. This spare parts set brings together the core service components needed when the original assembly shows wear, so the drive system can return to clean, controlled power delivery under load. The set is presented as a dedicated bag for the DF-03 and, based on the included contents, covers the internal differential hardware rather than general chassis maintenance. Visible parts include a large metal gear with shaft, a smaller metal gear, 2 black outdrives, 2 black differential housings or cams, 4 large shim washers, additional small shims and washers, 2 metal pins, 2 groups of ball bearings, 6 white bushings or spacers, 4 coil springs, and a tube marked Ball Diff Grease. That combination supports rebuild work, replacement of worn running parts, and fine adjustment of the differential stack. On the bench, the mix of gears, bearings, shims and grease gives a clear route for servicing a used transmission assembly or refreshing a stored chassis before the next run. As a model-specific spare parts bag for 58370, it also helps keep maintenance organised when a DF-03 build needs the correct drivetrain components close at hand. Warning! Not suitable for children under 14 years.
Gears & motor pinions
F Diff. Joint L & R, model spare parts for 58370
309808059€20.99
F Diff. Joint L & R for 58370 supplies 2 dedicated spare parts for the front differential area, with one left and one right version matched to the named model reference. The black molded pieces show a technical, component-led form with flanged heads and split forked ends that suit connection points in a mechanical assembly. As model spare parts, these joints are intended for targeted maintenance rather than general upgrading. The paired L and R layout matters where the front drivetrain uses side-specific geometry, allowing the correct part to sit in the correct position instead of forcing a universal substitute. The visible shape of each piece supports that role: the cylindrical body forms the main connection section, while the forked end is made to interface with adjoining moving parts in the assembly. This keeps the focus on fit, alignment and restoring the original mechanical layout of 58370. On the workbench, the set suits planned servicing, replacement of worn front differential components, or completion of an existing build that needs the specified joints. The 2-part format keeps both sides of the front assembly covered in one pack, making it easier to match left and right positions during installation. Warning! Not suitable for children under 14 years.
Gears & motor pinions
F101-F104 G-Parts Spur Gear Set, RC spare parts
300050506€10.29
The F101-F104 G-Parts Spur Gear M0.6/63Z set is a drivetrain spare-parts pack for selected RC chassis, centered on a 63-tooth main gear with module 0.6 gearing. It gives a direct replacement route for wear parts in the transmission area and keeps compatible running gear ready for service sessions, rebuilds and routine maintenance. The set is specified for F104PRO II, F104W, F104 and F103GT chassis. For the F104PRO II chassis, the data states that only the 63T06 spur gear is used. Scope of delivery contains 1x G-Parts tree with 7 pieces, grouping the gear and related molded components in one pack for organized parts handling at the bench. The black molded parts shown in the set include the large spur gear and smaller matching pieces shaped for mounting and spacing within the assembly. This spare-parts set suits drivetrain refresh work after regular use, replacement during a rebuild, or keeping key transmission components on hand between running sessions. In a workshop setup, the defined chassis compatibility and exact 63-tooth specification make it easier to match the correct gear set before installation. Warning! Not suitable for children under 14 years.
Gears & motor pinions
FF-03 Spur Gear 68T M0.6, RC spare part
300051423€4.59
This spur gear brings a defined 68T tooth count and M0.6 pitch to compatible RC chassis, giving the drivetrain a concrete replacement part for service, repair and setup work. As a single main gear, it suits bench maintenance where a worn transmission component needs to be swapped for the correct specification. The part is listed for FF-03 chassis and FF-04 EVO chassis, and it also covers a broad compatibility range across TD4, TD2, TA06, TA06 MS, TA06 PRO, TA07 PRO, TA08 PRO, TT-02, TT-02 TYPE-S, TT-02 TYPE-SR, TT-02D, TT-02RR, XV-02PRO, XV-01, XV-01 PRO and XV-01T chassis. That spread makes it relevant for racers and builders managing several platforms within one workshop. On TT-02 based cars, use can also apply to vehicles equipped with 54500. For TT-02RR chassis, the gear is listed as kit standard equipment. In practical use, this is the kind of transmission part kept on hand for routine rebuilds, drivetrain refreshes and chassis-specific parts planning. The single-piece scope of delivery keeps the replacement straightforward when preparing a compatible touring, front-wheel-drive or rally platform for the next maintenance session. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Gear Bag for 58106, RC spare gear set
309335111€10.19
This gear bag for the 58106 Stadium Blitzer brings the key transmission elements together in one replacement set, with a large spur gear, a compound gear and a round mounting plate shaped for drivetrain service. The geared parts transfer rotation through meshing teeth, while the central shaft openings support correct placement on the relevant axle points during repair or rebuild work. The large gear uses a broad toothed outer ring for the main driven stage, while the compound gear combines 2 gear diameters in one part to pass motion onward at a different ratio inside the transmission. The round plate adds 3 upright locating pins and 3 smaller peripheral holes, giving the assembly defined reference points for positioning and fastening. The white moulded finish makes the separate shapes easy to distinguish on the bench when comparing worn parts against the replacements. As a model spare part, this set suits maintenance tasks that focus on restoring clean gear engagement and consistent rotational flow. On a workshop table, the 3 parts can be checked against the existing gearbox assembly before installation. During servicing of a 58106 Stadium Blitzer, the set supports targeted replacement of worn internal transmission components rather than changing unrelated parts. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Gear Bag for 58340, model spare gear set
309335432€7.19
This gear bag for 58340 brings the drivetrain back into service with 4 replacement parts shaped for geared power transfer. The set contains white injection-moulded components shown as 2 large gears, 1 smaller double pinion gear and 1 circular cover plate with 3 mounting holes, giving the gearbox area the core parts needed for a targeted repair. The larger gear with a raised cylindrical hub works alongside the second large toothed gear, while the smaller double pinion links motion between stages of the transmission. That layout points to reduction and transfer inside the gearbox rather than cosmetic trim, so the set is suited to maintenance where worn teeth, missing internals or damaged drive parts interrupt movement. The separate cover plate closes the assembly at the matching mounting points and helps return the parts to their intended position inside the housing. Used during a rebuild, service interval or parts replacement, this set supports focused work on the transmission section of 58340 without replacing unrelated assemblies. It also fits neatly into a spares collection for model maintenance, where keeping the correct gears on hand can shorten downtime between bench work and the next run. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Hard Joint Cup-Set Gear Differential Spare Part
300053218€14.99
This spare part set combines a differential output with a hardened cone differential for gear differential service on compatible model vehicles. The pairing suits focused drivetrain maintenance where the differential assembly needs renewal with the two named components supplied together. The hardened cone differential is the key technical element in the set, adding a wear-oriented replacement part for rebuilds and repair work. In a gear differential, this component supports the transfer of drive through the transmission while the differential output forms the matching connection point within the assembly. The scope of delivery is clearly defined as 1 differential output and 1 hardened cone differential, which helps when planning a direct replacement around the existing drivetrain layout. The set is intended as an accessory and replacement component rather than a complete model. On the workbench, this combination fits routine servicing, repair after drivetrain wear, or preparation of a compatible chassis for further running. It also suits parts storage for model maintenance, where a clearly specified differential set can be kept ready for the next rebuild. Warning! Not suitable for children under 14 years.
Gears & motor pinions
M-05 Ball Bearing Set, chassis accessory, 18 pcs
300054179€41.49
The M-05 Ball Bearing Set is a chassis accessory made for M-05 machines and brings the full bearing count needed for a focused running gear update into one pack. With 18 metal ball bearings in 2 specified sizes, it supports smoother mechanical movement at the points where rotating parts meet, helping the chassis run with less drag during regular use. The set contains 6 x 850 ball bearings and 12 x 1150 ball bearings, matching the size combination stated for M-05 chassis compatibility. That size split makes the set useful for planned maintenance as well as for replacing worn bearings during a rebuild. In an RC chassis, ball bearings sit at key rotating points and reduce friction compared with basic bushings, which can help the drivetrain turn more freely and keep the response of the running gear more consistent. The silver-coloured metal finish reflects the precision-part character of the set and fits the technical look of workshop spares and tuning parts. On the bench, this bearing set suits routine chassis servicing, parts replacement after extended running, or preparation for a cleaner rolling setup before the next session. It also works as a practical stock part for M-05 owners who prefer to keep the specified 850 and 1150 bearing sizes ready for future maintenance.
Gears & motor pinions
M-07 Concept Spur/Counter Gear RC Spare Set
300051601€4.59
The M-07 Concept Spur/Counter Gear set is a model-specific transmission spare for M-07 Concept chassis cars, supplying the 2 molded gearbox gears needed for a full internal replacement. The set contains 1 main spur gear and 1 counter gear, each formed as a compound gear so the paired tooth counts work together inside the gearbox. The spur gear is specified as 37T/21T and the counter gear as 29T/23T. Those tooth combinations are the key mechanical detail of the set, because they determine how the gears mesh across the transmission stages in the M-07 Concept gearbox. As replacement parts, these gears are intended to renew the internal drive path where wear or damage affects smooth running. The studio image shows white molded gears with fine, evenly spaced teeth, hollow center openings and integrated stepped sections shaped for their gearbox positions. This set suits routine drivetrain maintenance on an M-07 Concept chassis car or a targeted gearbox rebuild after heavy use. Kept in a pit box, workshop drawer or spares case, the matched pair gives a direct way to restore the complete gearbox with the specified gear combination for this chassis platform. Warning! Not suitable for children under 14 years.
Gears & motor pinions
M-08/M-07/TA06 Gear Diff. Cup Joint (2), RC spare part
300051466€12.79
This spare part set supplies 2 cup joints for the gear differential on selected Tamiya chassis platforms, giving a precise replacement option when the original drivetrain connection parts need renewal. The set is listed as M-08/M-07/TA06 Gear Diff. Cup Joint (2) and is intended for compatible RC model maintenance rather than a universal fit. Compatibility in the data covers M-08 CONCEPT, M-07 CONCEPT, TA06, TA06 PRO, TA06 MS, FF-04 EVO, TD4, TD2, XV-01, XV-01 PRO and XV-01T chassis. That range helps keep one small service part relevant across several builds in the workshop, especially where the gear differential uses this cup joint format. The scope of delivery contains 2 driver cone diff. parts. For TD4 and TD2 chassis, the data also states use with 54471. In practice, this kind of replacement part suits routine drivetrain servicing, rebuilds after wear, or keeping compatible spares ready between running sessions. The 2-piece pack also supports paired replacement when both matching connection points are being refreshed on the same differential setup. Warning! Not suitable for children under 14 years.
Gears & motor pinions
M-08/M-07/TA06 Gear Diff. Gasket (2), spare part
300051464€2.69
This spare part set provides gear differential gaskets for compatible Tamiya chassis and supports clean, precise maintenance of the cone differential area. The pack contains 4 flat gaskets, each formed as a circular seal with a shaped center opening, 4 inward tabs and 4 outer holes for the matching mounting pattern. Compatibility covers M-08 CONCEPT, M-07 CONCEPT, TA06, TA06 PRO, TA06 MS, TA05 Ver.II, TD2, TD4, DB01, FF-04 EVO, TRF503, TRF211XM, TRF201XMW, XV-01, XV-01 PRO and XV-01T chassis. For specific setups, TA05 Ver.II uses the gasket with 54312, DB01 uses it with 54329, and TD4 and TD2 use it with 54471. The thin gasket format suits replacement during differential service when worn or compressed seals need to be exchanged for matching new parts. In workshop use, the 4-piece pack supports repeated maintenance sessions or more than one compatible chassis in the collection. The clearly defined cut shape helps align the gasket with the cone differential section during installation, keeping service work focused on fit and correct parts matching. Warning! Not suitable for children under 14 years.
Gears & motor pinions
MB-01 29T Pinion Module 0.6, RC pinion gear
300051726€5.39
The MB-01 29T Pinion Module 0.6 is a drivetrain spare part made for the Tamiya MB-01 chassis. With 29 teeth and module 0.6 gearing, it gives the transmission a clearly specified replacement component for maintenance work, rebuilds and planned parts stocking around an existing MB-01 setup. The compact gear uses a toothed outer profile and a central mounting hole to sit in the drive system as intended for this chassis platform. The engraved 29 marking provides a quick visual check during bench work, which helps when matching the installed ratio to workshop notes or separating parts between different builds. As a single-piece replacement, it suits targeted servicing where one worn pinion needs to be exchanged rather than a full drivetrain refresh. The metal construction also makes it a natural fit for a mechanical assembly that depends on accurate tooth engagement. In workshop use, this pinion gear supports routine transmission maintenance, parts sorting and chassis-specific repairs. It also works well as a spare kept alongside other MB-01 running gear, ready for rebuild sessions or for replacing a used gear after repeated track time. Warning! Not suitable for children under 14 years.
Gears & motor pinions
MB-01 D-Parts Gearbox, chassis spare parts
300051722€9.49
The MB-01 D-Parts Gearbox brings together key chassis components for repair, maintenance and parts replacement on the MB-01 platform. This sprue covers several of the mechanical sections that shape the layout of the chassis, with moulded parts for the drivetrain area, deck structure and steering system arranged as one matched set. Alongside the motor mount, gearbox and upper deck, the set also provides an R/C equipment deck and wheelbase adjustment parts for the MB-01 chassis. The black moulded pieces show reinforced ribbing, axle openings, hinge points and screw locations that suit structural mounting and gearbox housing tasks within the chassis build. Because these parts are supplied together on the D-Parts sprue, matching sections can be replaced with the correct group intended for the same platform. This set suits workshop use when an MB-01 chassis needs worn or damaged sections exchanged, or when a stored build is being returned to running condition with the proper chassis hardware. It also fits ongoing bench maintenance where drivetrain housings, steering mounts or deck sections need the original replacement parts for the model. Warning! Not suitable for children under 14 years.
Gears & motor pinions
MB-01 G-Parts Gears, chassis parts set
300051723€4.79
The MB-01 G-Parts Gears set supplies drivetrain-related replacement parts for the MB-01 chassis, centered on a G-Parts sprue with a 65T spur gear and differential components. This layout gives the chassis a direct source for key internal gear parts when wear, damage or a full teardown calls for fresh hardware. Within the sprue, the 65T spur gear serves as a defined transmission component rather than a generic gear, while the differential parts address another separate section of the drivetrain. Keeping these parts grouped under the G-Parts designation helps match them to the MB-01 platform during workshop sorting and chassis maintenance. The set is aimed at repair, servicing and parts replacement for an existing model, not at a complete vehicle build. No scale is stated in the data, and the pack is identified specifically for the MB-01 chassis. On the bench, this set fits naturally into routine gearbox service, differential refresh work or a rebuild after heavy use. It also suits keeping a dedicated replacement sprue on hand for the MB-01, so the correct gear and matching internal parts are ready when the chassis is opened for maintenance.
Gears & motor pinions
Pinion Gear-Set 16/17T Alu M0.6 for RC Chassis
300050354€8.99
This aluminum pinion gear set brings 2 tooth-count options to compatible RC chassis, with one 16T gear and one 17T gear in M0.6 pitch for drivetrain replacement or gearing changes. The silver-finish parts have a compact machined form, and each pinion is secured with a grub screw for firm mounting on the motor shaft. The set is intended for clearly defined chassis combinations rather than general use. TT-02FT, M-05, M-05 PRO, M-05 ver.II PRO, M-06 and M-06 PRO chassis use only the 16T gear. XV-02PRO, TA07 PRO, TA08 PRO and M-08 CONCEPT chassis use only the 17T gear. For F104PRO II chassis, the set is used with 51609. For TA07 MS chassis, only the 17T gear is usable and it is used with 51356, 51423 and 51548. Scope of delivery: 2 pinions and 2 grub screws. That makes the set a practical choice for workshop stock, scheduled maintenance or a direct replacement when a specific chassis calls for one of these tooth counts. In a bench setup, the stamped 16 and 17 markings help identify the correct gear quickly before installation, keeping chassis-specific drivetrain work clear and organized. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Pinion Gear-Set 18/19T Alu M0.6, RC gear set
300050355€9.99
The Pinion Gear-Set 18/19T Alu M0.6 brings 2 aluminum motor pinions into one compact drivetrain set, with 18T and 19T tooth counts for compatible Tamiya chassis. Each gear mounts with a grub screw, creating a firm connection on the motor shaft for controlled power transfer through the drivetrain. This set is intended for tuning, replacement and maintenance work across several chassis families. It fits M-05, M-05 PRO, M-05 ver.II PRO, M-06, M-06 PRO, WR-02, WR-02G, WR-02C and WR-02CB chassis. Use on some platforms follows specific tooth-count rules: GF-01CB uses only the 18T pinion, while TT-01 TYPE-E and TT-01D TYPE-E use only the 19T pinion. F104PRO II uses the set with 51609, TA07 MS Chassis uses it with 51356, 51423 and 51548, and F103GT uses only the 18T pinion with 50506. In workshop use, the 2 included pinions give a straightforward way to compare gearing options during a rebuild or drivetrain refresh. The M0.6 specification keeps the set aligned with matching gear applications, whether the goal is restoring a worn drive part or preparing a chassis for a different running setup. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Pinion Gear-Set 22/23T Alu M0.6, RC gear set
300050357€9.99
This pinion gear set brings 2 aluminum motor pinions into one compact drivetrain upgrade for compatible RC chassis. With 22T and 23T tooth counts and an M0.6 specification, it supports clear gearing choices when adjusting acceleration response or matching a replacement part during maintenance. Each pinion is machined with a central bore and a side threaded hole for the grub screw, so the gear mounts directly to the motor shaft in a straightforward mechanical layout. The included contents are 2 pinions and 2 grub screws. The 22T and 23T markings on the gears make identification quick during setup, storage or parts sorting. Aluminum construction keeps the set focused on a precise drivetrain component rather than a general hardware mix. For TT-01 TYPE-E chassis, the set offers both tooth-count options, while TT-01D TYPE-E chassis can use only the 22T gear. On the bench, this set suits routine replacement work, ratio comparison between 22T and 23T, or keeping a second pinion ready in the parts box for compatible RC running sessions. It also fits neatly into a workshop stock of drivetrain spares where exact tooth count and pitch matter. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Pinion Gear-Set 24/25T Alu M0.6, motor pinion set
300050477€10.79
This motor pinion set brings a focused drivetrain upgrade to compatible RC chassis with 2 aluminum pinions in 24T and 25T plus 2 grub screws for mounting. The M0.6 gear specification makes it a targeted choice for model builders who need the correct tooth pitch for matching transmission parts and a clean fit on the motor shaft. The set is intended for several established chassis platforms in the Tamiya range. It fits M-07 CONCEPT and M-08 CONCEPT chassis, with the note that only the 24T pinion can be used on M-08 CONCEPT. It also fits TT-01 TYPE-E and TT-01D TYPE-E chassis, where it is used with 53665. That compatibility detail matters during drivetrain setup, because the pinion must match both the chassis layout and the related gear components already in use. The aluminum construction adds a crisp machined finish and a precise look that suits technical RC assemblies. On the bench, this set supports replacement work after wear or a gearing change during a fresh build. In workshop use, the 2 included pinions give a direct choice between 24T and 25T, while the grub screws complete the mounting hardware needed for installation. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TA-01 DF-01 G Parts Gear Set for RC Models
309005322€14.99
The TA-01/DF-01 G-Parts gear set focuses on the mechanical core of compatible RC model assemblies, with injection-moulded components shaped for drivetrain and gearbox-related service work. Visible in the set are a large spur gear with an integrated central bevel gear, 2 medium cylindrical gears with fine outer teeth, smaller gear-form parts on a sprue, and 2 round disc-shaped pieces with raised pegs and centre holes. These parts support repair and replacement tasks where worn, missing or damaged transmission elements affect the running condition of a TA-01 or DF-01 based build. The different tooth forms, mounting holes and moulded connection points indicate use in geared drive sections rather than body or decorative areas. As unassembled service parts, the set gives builders the correct component shapes needed for maintenance without requiring improvised substitutions. On the workbench, the clearly separated moulded pieces help with checking fit before installation and with comparing old and new parts during a rebuild. This makes the set useful for planned servicing as well as for bringing an older chassis back into operating condition after drivetrain wear or gear damage. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TA-01/02/DF-01 Ball Diff. Unit, RC spare part
300053070€43.99
The TA-01/02/DF-01 Ball Diff. Unit is a dedicated RC spare part for compatible TA-01, TA-02 and DF-01 chassis, bringing the differential section back into working order with a matching replacement assembly. As a ball differential, it is intended for the drivetrain, where controlled internal movement helps manage how drive is transferred through the gearbox during running. The set is supplied as 1 ball differential with 8 pieces, giving the core parts needed for this specific maintenance job rather than a mixed assortment of unrelated hardware. The accompanying assembly information refers to ball differential grease during installation, showing that this unit is built as a serviceable mechanical component rather than a sealed module. Documented elements such as the differential spur gear, gearbox joint, hexwrench steps and placement notes point to a structured assembly sequence with attention to part orientation. That makes the unit relevant for repair benches, rebuild projects and routine drivetrain upkeep on older compatible chassis. In workshop use, the unit fits naturally into a maintenance cycle that includes inspection, replacement of worn drivetrain parts and reassembly of the gearbox area. For existing TA-01, TA-02 or DF-01 models, it provides a direct route to keeping a compatible chassis in running condition with the correct differential format. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TA-02 Gear Set, RC spare part, 15-piece drivetrain
300050529€12.99
The TA-02 Gear Set is a dedicated RC spare part set for transmission repair, built around the updated gear layout shown for this drivetrain. Its 15 included pieces support service work on compatible TA-02 based models, with the main revision centered on a one-piece molded spur and drive gear that replaces the earlier separate parts arrangement. This change brings the large spur gear and the smaller drive gear together in a single repair component, so the transmission uses the revised integrated format specified for this set. The package also uses an idler gear in resin instead of the earlier metal version, and the ball retainer specification is G4. These details matter when replacing worn internal drivetrain parts, because the set is designed around that exact update rather than a generic mix of gears. The scope of delivery is 1 gear set with 15 pieces. On the workbench, the set suits planned transmission overhauls as well as targeted replacement of worn gear components after regular RC running. It is intended for compatible TA-02 applications and is not compatible with 1/10 R/C off-road buggies, making the fit context clear before installation begins. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TA-06 Rear Gear Diff. Case Set 52T Spare Part
300051462€4.79
The TA-06 Rear Gear Diff. Case Set 52T is a dedicated spare part for compatible Tamiya chassis, built around a rear bevel gear differential housing layout that supports accurate servicing of the drivetrain. With 7 pieces in the set, it provides the core parts needed for replacing the rear diff case assembly when wear, damage or a rebuild calls for fresh components. This set is specified for TA06, TA06 PRO, TA06 MS, XV-01, XV-01 PRO, XV-01T, M-07 CONCEPT, M-08 CONCEPT and FF-04 EVO chassis. It also fits TD4 and TD2 chassis when used with 54471, which makes the compatibility scope especially useful for hobby benches handling several platforms. The black moulded parts shown for the assembly use multiple fastening points and a separate cover section, supporting a clean mechanical fit around the differential area. On a maintenance bench, the set helps restore a worn rear transmission section with chassis-specific parts instead of improvised substitutes. During a rebuild, the 52T case format and rear mounting design support a focused replacement job for the differential housing section while keeping the chassis setup aligned with the listed applications. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TA05 IFS Ver.II Spur Gear, RC spare part, 70T M0.6
300051215€6.29
The TA05 IFS Ver.II Spur Gear is a dedicated RC spare part for drivetrain service on selected Tamiya chassis. With 70 teeth and module 0.6, this main gear is built for transmission use where the gear ratio and tooth format must match the existing layout, making it a focused choice for repair or planned parts replacement. The component is supplied as 1 main gear 70T and is shown as a black molded gear with a fine outer tooth ring, a large center hole and multiple evenly spaced inner holes. That geometry matters during maintenance because the mounting pattern and hub area have to align with the drivetrain hardware already in the chassis. Compatibility is stated for TD4 chassis, TD2 chassis, TA08 PRO chassis, TA05 Ver.II chassis and TA05, which keeps selection tied to named platforms rather than broad guesswork. On the bench, this gear suits routine transmission refreshes, rebuilds after wear, or a direct swap when a matching 70T M0.6 part is needed for one of the listed chassis. The single-part scope also keeps the replacement straightforward when an existing drivetrain setup is being restored with the same specification rather than changed to a different ratio. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TA08 06 Module Spur Gear 71T, RC spare gear
300051667€3.69
The TA08 06 Module Spur Gear 71T is a drivetrain spare part for TA08 chassis cars, built to replace a worn gear with the same 06 module format and 71T tooth count. In the transmission, the spur gear works directly with the pinion gear to pass motor power into the driveline, so a fresh gear can restore clean meshing where wear has built up over time. The part shown has a black moulded finish, a large centre hole and multiple circular cut-outs around the hub. Those openings are part of the gear design and sit around the central mounting area while the fine outer teeth carry the load of the gear mesh. Used as routine maintenance, this replacement helps keep the chassis in running condition when the original gear shows visible wear on the teeth. The pack contains 1 TA08 06 Module Spur Gear 71T. It suits workshop upkeep between running sessions, whether the transmission is being refreshed after repeated use or a worn gear is being swapped before the next outing. For TA08 owners who keep spares on hand, this gear covers a core wear point in the drivetrain with the exact compatibility stated for TA08 chassis cars.
Gears & motor pinions
TA08 Front Belt 132T, RC spare part for chassis
300051670€12.19
The TA08 Front Belt 132T is a dedicated replacement part for compatible TA08 chassis cars, built to restore the front drivetrain with the specified tooth count and matching belt format. Its black toothed loop is shaped to run around the front transmission pulleys, where it transfers motion through the drivetrain and helps return a worn setup to its intended mechanical operation. As a service part, this belt is focused on fit and function rather than cosmetic change. The 132-tooth layout is the defining specification for this component, making it relevant when an existing belt shows wear through repeated running or maintenance inspection. The thin, flexible construction allows the belt to sit correctly within the chassis transmission path, while the toothed inner profile is made to mesh with the matching pulley system used in the TA08 platform. This replacement suits regular workshop upkeep, planned drivetrain refreshes and repair after belt wear has affected running consistency. Kept as a spare for a TA08 chassis car, it supports faster maintenance decisions when the front drive system needs the correct belt specification rather than a universal substitute.
Gears & motor pinions
TA08 Rear Belt 101T, chassis spare part
300051671€9.19
The TA08 Rear Belt 101T is a dedicated spare part for TA08 chassis cars, built to replace the rear transmission belt when wear starts to affect the drive system. Its toothed inner surface is designed to engage with matching pulleys, creating the mechanical link that carries rotational force through the rear section of the chassis. Used as part of routine maintenance, this replacement belt helps preserve the intended drivetrain function of a TA08 setup. The circular flexible belt format allows it to sit correctly around the pulley path, while the 101T specification identifies the exact rear belt version supplied here. The pack contains 1 rear belt, making it a direct service part rather than a multi-piece upgrade set. Because this is a chassis-specific component, compatibility is stated for TA08 chassis cars. In workshop use, a fresh rear belt is fitted when an existing belt has become worn through repeated running. That makes this part a practical choice for keeping a TA08 car ready for further track sessions, tuning work, and regular upkeep of the transmission system.
Gears & motor pinions
TB-03 Module Spur Gear 96T RC Drivetrain Part
300054055€5.69
The TB-03 Module Spur Gear 96T is a dedicated RC drivetrain part for standard spur gear applications across a wide group of Tamiya chassis. Its 96-tooth layout supports gear ratio setup in combination with a pinion gear, making it a practical choice when a build calls for a specific transmission balance and clean meshing. The gear is specified for high efficiency, low drive losses and low noise, so power can move through the drivetrain with less wasted motion at the spur stage. The moulded design uses a large centre opening and multiple lightening holes around the gear face, reducing unnecessary mass while keeping the toothed outer ring ready for transmission duty. As a single main gear, it suits maintenance work, replacement of worn parts and gearing changes within an existing chassis setup. Compatibility is stated for F104PRO II, F104Ver.II PRO, F104W, F104, TB-03, TB-03 VDS, TB-04, TB-05, TRF103, TRF102 and TRF101 chassis. In workshop use, the gear fits naturally into rebuilds, race-day spares boxes and planned ratio changes where a 96T spur is the required specification. The scope of delivery contains 1 main gear. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TB-03/TT-02SG Spur Gear, RC spare part, 64T
300051356€5.69
The TB-03/TT-02SG Spur Gear 64T M0.6 is an RC spare part built for drivetrain service, replacement and gearing maintenance on compatible chassis. With 64 teeth and module 0.6, it forms the main gear interface that transfers drive through the transmission, making it a concrete choice when an existing setup needs the same specification again. This gear is supplied as 1 main gear and is intended for use with TT-02 chassis, TT-02D chassis, TT-02 TYPE-S chassis and TT-02 TYPE-SR chassis. It can also be used on vehicles equipped with 54500. For TT-02RR chassis, the 64T gear is standard kit equipment, which helps when matching the original drivetrain specification during routine parts replacement. The visible central mounting hole and surrounding fixing points suit its role as a mounted transmission component rather than a general workshop accessory. In workshop use, a like-for-like 64T replacement keeps a compatible chassis aligned with its intended gearing layout after wear or damage. It also suits RC model maintenance benches where specific tooth counts and module sizes matter for keeping transmission parts consistent across different compatible builds. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TB-04 One-way/Gear Dif. Ring Gear Set 40T
300051547€7.39
The TB-04 One-way/Gear Dif. Ring Gear Set 40T is a drivetrain spare part for selected RC chassis, built around a 40-tooth ring gear and matching bevel components for freewheel or gear differential use. Its dedicated fitment keeps maintenance work focused on the transmission systems named for this set. The set contains 1 bevel gear set with 3 parts. The large ring gear uses a circular form with evenly cut teeth around the outer edge, while the smaller matching gears complete the assembly for the stated drivetrain function. This makes the set suitable for replacing worn internal transmission parts or preparing a compatible chassis for differential or one-way service work. Compatibility is stated for TB-Evo.7 chassis, TB-Evo.6 MS chassis, TB-Evo.6 chassis, TB-05 PRO chassis, TB-04 chassis, TB-04 PRO chassis and TC-01 chassis. In workshop use, the set supports targeted repairs on the named platforms rather than broad universal fitment. The 40T specification gives a clear reference point when matching replacement drivetrain parts during servicing, rebuilds or planned maintenance on compatible RC car chassis. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TB-05 06 Module Spur Gear 63T, spare gear
300051609€3.89
The TB-05 06 Module Spur Gear 63T is the direct spare gear for the TB-05 chassis, built to return the drivetrain to the original kit specification with a 63-tooth layout and 06 module tooth form. As an OEM replacement, it is intended for the same transmission position as the stock part, so the gear train can be restored with the correct meshing profile and ratio. The moulded gear uses fine outer teeth around the full circumference to transfer rotational force through the drivetrain, while the large centre bore locates the part on its mounting point. The inner web includes multiple moulded support sections and cutouts that shape the gear body around the hub area. This is a single replacement component rather than a conversion part, making it suitable when the original spur gear is worn or when the stock specification is needed again. The tooth pitch is optimised for use with common gear ratios, as stated in the product data. In workshop use, this spare gear suits routine drivetrain maintenance on a TB-05 chassis or a rebuild that returns the transmission to the original kit setup. It can also serve as a like-for-like replacement to keep a running chassis aligned with the factory gear specification. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TL-01 G-Parts Gear Set, chassis spare parts
300050738€12.29
The TL-01 G-Parts Gear Set is a dedicated spare parts pack for the TL-01 chassis, built around the transmission components used in this platform. With 10 pieces in the set, it provides a focused way to replace worn gearbox parts, refresh a running chassis, or support a rebuild with matching molded elements. The scope of delivery includes 1x G-Parts set with 10 pieces. The visible component group covers several gear forms used in drivetrain layouts, including larger spur-style gears, smaller geared parts and round cover-like elements shaped for gearbox assembly. These molded parts are intended for power transfer inside the chassis transmission, where the gear train routes motor output through meshing teeth and mounted shafts. Using a chassis-specific set helps keep fit and function aligned with the TL-01 layout instead of relying on mixed generic parts. On the bench, this set fits routine service, fault tracing after drivetrain wear, or a planned refresh of an older TL-01 build. It also works well as a workshop spare kept alongside other chassis-specific parts, ready when gearbox maintenance calls for the correct G-Parts group. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TL01 Speed-Tuned Gear Set, RC gearbox upgrade
300053342€14.99
The TL01 Speed-Tuned Gear Set changes the character of a TL-01 drivetrain with a replacement 47T spur gear and 29T counter gear. Installed in place of the normal transmission gears, this hop-up option shifts the final drive toward higher speed and gives the chassis a sharper, faster-running setup on the track. The ratio change is clearly defined across 3 pinion choices. With a 19T pinion, the ratio moves from 7.96 to 5.95; with 21T, from 7.20 to 5.39; and with 23T, from 6.57 to 4.92. The technical guide also shows grease application points during assembly, helping the gear teeth mesh correctly inside the gearbox case. Bearings and a hollow carbon gear shaft are shown as available separately, and their use is noted for reducing burden on the motor during running. Scope of delivery: 1x Speed Gear. This upgrade suits TL-01 builds that are being tuned beyond the standard transmission layout. In workshop use, the gear swap gives builders a direct mechanical change to experiment with, while on-road running highlights the effect through a more speed-oriented drive setup. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TRF 1050 Bearing Thick 3mm, ball bearings
300042220€4.89
The TRF 1050 Bearing Thick 3mm is a focused tuning and replacement part for touring car chassis that use a reversible suspension system with Double-Cardan drive shafts. Each bearing measures 5 x 10 mm with a 3 mm width, and the set contains 2 ball bearings for the positions that need this narrower format. Its key difference is the reduced width compared with the usual 5 x 10 x 4 mm bearing used in these layouts. That 1 mm change gives the Double-Cardan swing shaft more running clearance at the inside of the hub carrier, which is the exact area named for installation. This makes the bearing useful when a chassis setup calls for extra space around the shaft rather than the standard bearing thickness. The pair is intended only for the front or rear inside portion of the hub carrier, keeping the application specific and technically clear. Compatibility information covers numerous chassis families, including TA07 MS, TA06 MS, FF-04 EVO, TB-Evo.6, TB-Evo.7, TC-01, TRF419, TRF419X, TRF419XR, TT-02 TYPE-SR, TA07 PRO, TA08 PRO, FF-03, TB-03, TB-04, MF-01X, M-05, M-06, M-07 CONCEPT, M-08 CONCEPT, TT-02 TYPE-S and TRF420X, with some applications requiring specified companion parts.
Gears & motor pinions
TRF420 Alu. F Direct Cups, spare parts, aluminum
300051647€19.29
The TRF420 Alu. F Direct Cups set is a focused spare parts release for the front drivetrain of the TRF420 chassis. With 2 aluminum front direct cups and 1 swing shaft cap parts set in the pack, it provides the named replacement parts needed when wear begins to affect the front drive section and running efficiency starts to drop. The direct cups are made from lightweight aluminum and finished with a hard coating. That combination gives the parts a low-mass construction at a point in the drivetrain where repeated contact matters, while the coated surface is specified to support durability during regular use. The shape is designed for the TRF420 chassis, so the set suits planned maintenance as well as like-for-like replacement during a rebuild of the front end. Compatibility also extends to cars using the TRF420 Front Direct Pulley 37T, which broadens fitment within TRF420-based setups. On the bench, this set fits naturally into routine drivetrain servicing, especially when worn cups begin to influence how cleanly the front section transfers drive. It also makes sense as a workshop spare for race-day maintenance, where having the correct front-end hardware ready can shorten downtime between running sessions.
Gears & motor pinions
TRF420/419/TA-07 Gasket (4), spare part set
300051648€5.59
The TRF420/419/TA-07 Gasket set brings the shared gear differential seal used in the TRF420, TRF419 and TA07 into the Tamiya spare parts range as a dedicated 4-piece replacement pack. Each gasket is a flat ring with a profiled center cutout and 4 mounting holes, shaped to sit within the differential assembly where accurate positioning matters during service work. Replacing worn gaskets at the right time helps keep the differential unit properly sealed and ready for continued use. The 4 included pieces provide matching replacements for maintenance sessions, rebuilds or parts-box stock, especially on chassis that use the common gear differential design named in the compatibility list. The brown fibre-style gasket material shown in the set is suited to its role as a sealing layer between mechanical parts, while the identical cut pattern across all 4 pieces supports consistent fitment. In workshop use, these gaskets suit routine diff overhauls on compatible touring chassis, whether the goal is refreshing a frequently run car or preparing spare seals before the next rebuild. Kept alongside other service parts, the set gives TRF420, TRF419 and TA07 owners the exact gasket type specified for these gear differential units.
Gears & motor pinions
TRF421 Drive Belt, replacement part, 116T
300051746€10.19
The TRF421 Drive Belt 116T is a dedicated replacement part for the drivetrain of the matching TRF421 chassis. Its closed-loop form and evenly spaced inner teeth are made to run around the corresponding pulley path, creating the mechanical link that carries rotation through the transmission during RC use. The 116T specification identifies the belt size for the intended setup and helps maintain the original drive ratio and belt path of the chassis. The black belt material is flexible enough to route through the drivetrain layout while the toothed inner surface is shaped for positive engagement with matching gears or pulleys. This makes the part relevant during routine maintenance, a full rebuild, or the replacement of a worn belt after repeated running sessions. As a single drivetrain component, it is best chosen by the exact designation rather than by appearance alone. In workshop use, the belt fits naturally into service tasks where the transmission is being refreshed or restored to its stated specification. On a race chassis, a correctly matched drive belt helps keep the power system operating through the intended pulley sequence, so the rest of the drivetrain can work as designed. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TRF421 Fr. Direct Pulley 37T, RC spare part
300051744€11.19
The TRF421 Fr. Direct Pulley 37T is a dedicated RC spare part for drivetrain service on compatible model setups. Its circular pulley form, central hub and evenly spaced outer teeth are built for direct engagement with a toothed belt, so rotational motion can be transferred through the front drive section with the specified 37T configuration. The black component uses a perforated inner disc with multiple round cutouts, a detail that removes material from the rotating section while keeping the outer toothed ring and hub structure intact. The raised hub section provides the mounting point, and the toothed circumference guides the belt along a defined path instead of relying on friction contact. This makes the part relevant wherever a worn pulley, damaged teeth or drivetrain refresh calls for a like-for-like replacement. The studio image also shows a ring-shaped companion part with an inner groove, indicating a matching hardware element within the spare-part set. In workshop use, the pulley suits routine maintenance, rebuilds and parts replacement after extended running sessions. It fits naturally into a spares box for racers and tuners who keep belt-drive assemblies working with the correct front transmission hardware. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TRF421 Gear Diff Set, RC differential parts set
300051745€39.99
The TRF421 Gear Diff Set brings the core parts of a gear differential into one RC maintenance and assembly pack, with a 37T differential case, bevel gears, cross pieces and metal outdrive cups arranged for a focused driveline rebuild. The included oil, gasket plate and sealing parts support the internal mechanism where the gears rotate inside the closed housing. Inside the set are 2 black housing halves, 2 large silver bevel gears, 4 smaller bevel gears, 2 white cross-shaped internal parts, 2 metal shafts or pins, 2 small straight pins, 2 ring bearings, blue O-rings, washers, shims, spacer discs, clips and screws. These parts work together through a clear mechanical sequence: the bevel gears sit inside the case on the cross pieces, the outdrive cups connect at each side, and the housing closes around the assembly with the gasket and screws. The bearings support the rotating sections, while shims and spacers help position the moving parts within the differential body. This set suits workshop use, scheduled maintenance and replacement of worn differential internals on a TRF421 build. On the bench, the laid-out parts make it easy to sort the assembly stages, check each sealing and spacing component, and rebuild the differential with the required hardware close at hand. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TRF421/420/419 Spur Gear 116T M0.4, spare part
300051557€4.49
The TRF421/420/419 Spur Gear 116T M0.4 is a dedicated spare part for compatible Tamiya racing chassis, built around a 116-tooth layout and module 0.4 specification. That combination makes it a direct drivetrain replacement when the original gear shows wear, helping restore the intended transmission setup for continued running and regular workshop service. Its role sits at the center of the drivetrain, where tooth count and module need to match the chassis design exactly. The pack contains 1 spur gear, so maintenance can stay focused on the specific part that needs replacement rather than a larger mixed set. The source data also names compatibility with the TRF418 chassis in the long text, while the short designation states TRF421/420/419; this copy therefore follows the current product designation without extending fitment beyond the provided naming. As a model accessory in the Models Supplies category, it suits bench stock for rebuilds, wear replacement and planned servicing. During routine maintenance, a fresh spur gear can be fitted when drivetrain wear becomes visible or when a rebuild calls for the stated 116T M0.4 specification. Kept in a parts case or workshop drawer, it gives compatible chassis a like-for-like replacement ready for the next service interval. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TRF421/X Diff. Case Parts Bag (37T), spare part
319007664€7.79
TRF421/X Diff. Case Parts Bag (37T) is a model supplies spare part created for differential-related service work. The designation identifies the component group directly, making it easier to match a replacement to the correct area of a compatible build when worn or missing parts need to be exchanged. The 37T marking provides a concrete specification within the part name, which helps separate this bag from other drivetrain or case components in a workshop stock. As a dedicated replacement rather than a general accessory, it suits planned maintenance, rebuilds and the careful upkeep of running gear assemblies. The bag format also keeps the included parts grouped together instead of loose in a parts box, which supports clearer storage and faster identification during repair sessions. On the bench, this spare part fits naturally into routine model servicing, whether a differential is being refreshed after use or a stored chassis is being brought back into running condition. It also works as a practical reserve component for builders who keep key drivetrain spares ready between race-day checks and workshop maintenance. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TRF421/X Spur Gear Nut Blue, model accessory
313451527€7.29
The TRF421/X Spur Gear Nut Blue is a dedicated model accessory for the drivetrain area, supplying a specific replacement part for compatible RC builds and maintenance work. Its blue finish gives this small fastening component a clear visual identity on the bench, where quick part recognition matters during rebuilds and servicing. Used at the spur gear mounting point, the nut supports accurate replacement when an original part is worn, misplaced or being swapped during routine upkeep. The compact format makes it easy to sort into organiser trays, hardware boxes or spare-parts drawers alongside other workshop essentials. Because the data identifies this part by its exact TRF421/X designation, it also helps keep parts selection focused on the intended application instead of relying on generic hardware. On a home workbench, in a club pit area or during pre-run checks, a dedicated spare like this keeps drivetrain maintenance moving with less interruption. It fits naturally into regular service routines where small fastening parts are checked, replaced and kept ready for the next rebuild. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TT-01/DF-02 Ball Differential Set, RC drivetrain part
300053663€64.49
The TT-01/DF-02 Ball Differential Set is an RC drivetrain upgrade designed to add a limited slip differential effect to compatible chassis. When 1 driven wheel loses contact with the surface, the ball differential helps maintain drive instead of letting power fade away, which supports steadier acceleration on mixed grip sections and uneven ground. This is an assembly-type differential set, and the included gearbox joints form part of the build. The mechanism is adjusted by tightening the 2x10 mm cap screw until the ring gear does not slip, then backing off within an adjustment range of up to 1 turn from the fully tightened position. During adjustment, the 2x5 mm cap screw is removed and then tightened again to prevent loosening. The instruction material also identifies parts such as disk springs, a ball thrust bearing, an 850 metal bearing, a screw bushing and a pressure plate cap, showing the internal layout of the unit and how the rotating parts are aligned. Fitment covers TT-02, TT-02 Type-S, TT-02D, TT-01 Type-E, TT-01 Type-ES, TT-01D Type-E, DF-02 and TT-02B chassis. For TT-02 Type-S, use with Item 53806 TT-01 Ball Differential Cup Joint for Universal Shaft. For TT-02B, MB16 6 mm O-rings are used in different positions depending on front or rear installation.
Gears & motor pinions
TT-01/E/R G-Parts Gear Set, drivetrain spare parts
300051004€10.29
The TT-01/E/R G-Parts Gear Set is a drivetrain spare-parts set for the TT-01D TYPE-E and TT-01 TYPE-E chassis. With 8 included E/R/G parts, it provides a direct replacement option for gearbox-related components when wear, damage or a rebuild calls for matching parts inside the transmission area. The set is shown with molded black drivetrain pieces such as gear elements, housing-style parts and a ring-shaped spacer component. Toothed gears transfer motion by meshing with one another, while the shaped case parts support correct placement of the internal mechanism during repair or reassembly. This makes the set useful when a compatible chassis needs specific transmission parts rather than a full overhaul with unrelated components. The 8-piece format also keeps the scope focused on the relevant section of the build. On the bench, the set supports planned maintenance as well as targeted replacement after heavy running sessions. It also fits neatly into a spare-parts collection for TT-01D TYPE-E and TT-01 TYPE-E chassis, where matching drivetrain components help keep future repair work straightforward. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TT-01/TNS/M-05 Bevel Gear Set, RC spare part
300051008€6.39
The TT-01/TNS/M-05 Bevel Gear Set is an RC spare part for differential maintenance on selected chassis from the Tamiya range. Metal bevel gears with conical, angled teeth are designed to mesh within the differential assembly, where they help keep drivetrain movement consistent as the transmission changes load through corners and acceleration. This set is specified for M-06, M-06 PRO, M-05 ver.II PRO, M-05, M-05 PRO, TT-01D TYPE-E and TT-01 TYPE-E chassis. The scope of delivery contains 1 bevel gear set diff., making it a focused replacement choice when the differential internals need renewal rather than a full gearbox rebuild. The visible parts layout includes larger gears with square centre openings, smaller matching gears with round centre holes and a 3-arm metal piece shaped for the assembly. That combination points to the internal differential gear train rather than external transmission parts. In workshop use, this kind of spare part suits planned servicing after extended running sessions or a targeted repair when a compatible chassis shows drivetrain wear. Kept alongside other maintenance parts, it also helps support faster rebuilds between track sessions and regular bench work on M-05, M-06 and TT-01 TYPE-E based models. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TT-02 G Parts Gear Set, RC drivetrain spare parts
300051531€7.19
TT-02 G Parts (Gear) brings the core internal pieces of a differential and gearbox service set into one focused spare-parts pack for compatible RC chassis. The layout shown includes differential housing cups, cross-shaped spider gear shafts, multiple bevel gears, a large spur gear and a small bushing or sleeve, giving a clear base for drivetrain maintenance where worn transmission parts need replacement. Inside the differential, the bevel gears and cross shafts form the mechanism that lets drive pass through the axle while allowing the left and right sides to rotate at different speeds in a turn. The housing cups hold these internal gears in position, while the larger toothed gears connect the differential assembly to the rest of the transmission. This makes the set useful for restoring gear mesh, replacing damaged internal parts or rebuilding a gearbox after heavy running. The black molded finish also makes the individual shapes easy to identify on the bench during sorting and fitting. In workshop use, the set suits routine servicing, targeted repairs and full differential rebuilds on a compatible TT-02 platform. It also works as a practical stock spare for RC owners who keep drivetrain wear parts ready between maintenance sessions.
Gears & motor pinions
XV-01 G Parts Gears, spare part set for chassis
300051506€4.79
XV-01 G Parts Gears is a spare part set for the gearbox section of selected RC chassis and supplies 4 dedicated components for transmission maintenance. The set is suited to builders who need the named G Parts area rather than a full rebuild pack, making it easier to replace the exact pieces used inside the drivetrain. Compatibility is stated for XV-01, XV-01 PRO, XV-01T, TD4, TD2 and FF-04 EVO chassis. That cross-platform fit makes the set useful for keeping several running models in service with one reference pack. The included parts are shown as dark mechanical components with toothed gear forms and mounting points, indicating their role in transferring drive through the gearbox assembly. As a chassis-specific spare set, it supports repair work after wear, damage or routine inspection of internal transmission parts. On the workbench, the set fits naturally into a maintenance routine built around checking drivetrain function, replacing worn gears and restoring smooth mechanical engagement in compatible chassis. It also works well as a backup spare kept with an RC parts collection for faster turnaround when a gearbox service is due. Warning! Not suitable for children under 14 years.
Gears & motor pinions
XV-02 06 Module Spur Gear 70T, RC spare part
300051694€3.69
The XV-02 06 Module Spur Gear 70T is a drivetrain spare part for XV-02 chassis cars, built around a 70-tooth gear profile in 0.6 module sizing. As a direct replacement component, it supports maintenance work when a worn transmission gear needs to be exchanged or when the drivetrain specification is being restored to the stated setup. The set contains 1 spur gear and 2 matching ring parts. The gear face shows a molded 70 marking for clear identification, along with a large central hole, smaller circular openings and recessed cutouts across the wheel. These visible details help distinguish the part during bench work and parts sorting, especially when several drivetrain components are stored together. The toothed outer edge is shaped for meshing within the transmission system used on the compatible chassis. In workshop use, this spare part suits routine servicing, repair after wear, or keeping a correct replacement ready in the pit box. Compatibility is stated for XV-02 chassis cars, so the part can be selected specifically for that platform instead of as a generic gear. The compact format also makes it practical as backup stock for regular running sessions and scheduled drivetrain upkeep.
Gears & motor pinions
39/40T RingGear, spare gear set for XV-02 TT-02
300051704soon available again
This spare gear set brings the key drivetrain parts for direct coupling service into one focused pack. The set contains 2 direct coupling ring gears, one with 39 teeth and one with 40 teeth, plus 2 bevel pinion gears matched to those tooth counts. That layout gives a clear replacement route when the front direct coupling assembly needs the specified parts for continued use. The parts are named for Item 22047, the XV-02/TT-02 Front Direct Coupling Set with 39T, which places this set squarely in the drivetrain area rather than as a general hardware assortment. The 39T ring gear works with its dedicated bevel pinion gear, and the 40T ring gear works with its own matching pinion, so each pairing stays tied to the correct tooth count. The image-supported layout also makes the difference between the 2 ring gear options easy to identify during bench work, with each larger ring gear shown alongside its smaller mating pinion. Compatibility is stated for XV-02 and TT-02 chassis cars, making the set a practical choice for maintenance, repair, or keeping the correct replacement gears on hand between running sessions. On a workbench, the paired parts support straightforward selection when servicing the front direct coupling area of those chassis platforms.
Gears & motor pinions
Counter Gear 58043/58336 Hornet spare gear
310004839soon available again
Counter Gear 58043/58336 Hornet is a dedicated replacement gear for compatible Tamiya model vehicle assemblies, built to restore the transmission function with the correct compound layout. The part combines 2 gear stages on one central hollow shaft, with a larger lower spur gear and a smaller upper gear formed as one piece for accurate placement in the drivetrain. The moulded white gear body is shaped for mechanical fit rather than decoration, and the 4 round holes in the larger gear face provide a clear visual identifier during servicing. As a spare part in the Models Supplies range, it is suited to maintenance work when a worn or damaged transmission gear needs to be replaced with the matching component. The integrated double-gear format supports the transfer of drive between meshing stages inside the compatible gearbox, where alignment and tooth engagement matter for consistent running. This gear belongs in the workshop, parts box or rebuild bench for compatible Hornet-related maintenance tasks. It can be fitted during transmission repair, routine overhaul or when bringing an older chassis back into running condition with the correct replacement component.
Gears & motor pinions
DF-03 Bevel Gear Set, spare part for chassis
300051247soon available again
The DF-03 Bevel Gear Set is a dedicated spare part pack for maintenance on the DF-03 chassis. With 5 included components in one set, it supports drivetrain service work where worn or damaged bevel gears need to be replaced with parts matched to the original platform. The pack contains 1 gear bevel gear set with 5 pieces, supplied as replacement components rather than as a universal transmission assortment. The moulded parts show the gear forms, centre holes and contact surfaces needed for installation in a compatible DF-03 layout. This makes the set useful for routine workshop stock, planned rebuilds or targeted repairs after heavy running. Because the parts are specified for the DF-03 chassis, compatibility stays clear during maintenance and parts selection. On the bench, the set fits naturally into gearbox servicing, drivetrain refreshes and rebuild work on an existing model. It can be kept alongside other running spares for the DF-03 platform, ready for the next transmission check or replacement job. Warning! Not suitable for children under 14 years.
Gears & motor pinions
DF-03 Spur Gear Set, RC spare part for chassis
300051248soon available again
The DF-03 Spur Gear Set is a dedicated RC spare part for the DF-03 chassis and supplies 4 replacement gears for transmission service. With 2 large gears, 1 medium gear and 1 small gear in the set, it covers several gear positions used in the drivetrain and gives rebuilds a direct parts match for this chassis platform. The gear shapes shown in the set use a classic spur gear layout, where straight-cut teeth mesh with neighbouring gears to pass motor drive through the transmission. That makes the set useful when worn teeth, damaged gear faces or general drivetrain use call for fresh components. The loose parts format also helps with selective replacement, since only the affected gear position needs to be changed rather than replacing unrelated transmission parts at the same time. Scope of delivery: 1x main gear set with 4 pieces. On the workbench, the set fits naturally into routine DF-03 servicing, rebuilds after heavy use, or parts storage for future repairs. Kept alongside other chassis spares, these gears support faster maintenance planning whenever a compatible DF-03 transmission needs attention. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Diff. Gear Bag Grasshopper Hornet Spare Parts
319115010soon available again
This spare parts set is made for differential service on compatible Grasshopper and Hornet RC models. Supplied as a 6-piece gear bag, it focuses on one specific drivetrain area and gives repair or rebuild work the matching gears needed for a direct replacement task. The set belongs to the model supplies range and is intended for maintenance rather than first-time vehicle assembly. By concentrating on the differential section, it helps address wear in a part of the drivetrain that affects power transfer during running. The bag format keeps the relevant gears grouped together for workshop use, whether the job involves replacing worn parts or refreshing an older compatible chassis. Compatibility is stated for Grasshopper and Hornet, so the set can be selected for those named models without adding unrelated universal-fit claims. On the bench, this kind of replacement set fits routine upkeep, targeted repairs and parts storage for future service work. It is a focused choice for RC model maintenance where the differential needs the correct matching gear components rather than a general mixed spares assortment.
Gears & motor pinions
DT-03/02 A-Parts, spare parts set for RC models
309005783soon available again
DT-03/02 A-Parts 58344 supplies a dedicated replacement sprue for RC model maintenance, with black molded sections shaped for mechanical housing duties. The visible parts include cover and case pieces with circular openings, raised cylindrical forms and multiple mounting holes, giving repair work a direct match to the original layout. Ribbed structural detailing adds definition to the molded sections and helps distinguish each area during sorting and fitting. Because the parts remain attached to the runner, each section stays organized until removal, which supports careful preparation at the workbench. The set is identified as A Parts for 58344, making it a targeted choice when a rebuild calls for the correct molded frame sections rather than a generic hardware assortment. The glossy black finish matches the look typically used for enclosed chassis and gearbox areas. On a repair bench, the sprue format helps with checking shapes and positions before cutting each section free. It also suits keeping a dedicated replacement set on hand for future service work on a compatible build, especially when a damaged cover or casing section interrupts running sessions. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Gear Bag 58618 Mt.Beetle, RC spare gear set
319335026soon available again
Gear Bag 58618 Mt.Beetle is a dedicated RC spare parts set for drivetrain maintenance on the specified Tamiya model. The set contains 2 moulded gears: a large spur gear with a central mounting hole and 3 triangular spoke cutouts, plus a compound gear that combines a large outer gear with a smaller integrated pinion. This layout supports a like-for-like replacement where the original geared transmission needs fresh parts. The visible tooth form and centre bores make the parts easy to identify during servicing, while the compound construction keeps the paired gear stages in one piece. That matters when a repair calls for the original gearing arrangement rather than a mixed substitute. The cream-coloured finish also helps distinguish these gears from other workshop parts during sorting and installation. As replacement components rather than a general accessory, they are aimed at keeping an existing RC vehicle in running order with the correct matching shapes. On the bench, the set fits naturally into routine maintenance, rebuilds after wear, or a parts box kept for model support. It also suits a targeted repair when inspection shows damaged teeth or a worn transmission gear in the Mt.Beetle assembly. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Gear Bag for Gr. C Chassis, model spare parts
319335089soon available again
This gear bag supplies drivetrain parts for Gr. C Chassis 70T/0.6 applications, centering the set around a large spur gear and matching support pieces for mechanical replacement work. The cream-white molded parts shown are arranged as individual components, making the set easy to identify when a chassis needs the correct transmission pieces returned to service. The visible contents consist of 1 large toothed gear, 2 flanged ribbed hub-like parts with hexagonal inner openings, and 3 small ring spacers. That combination points to power transfer, axle mounting and spacing functions within the matching chassis layout. The large gear uses a central round hole and 5 smaller mounting holes, while the ribbed parts add structure around the hex openings for placement on the intended mechanical interfaces. The 3 ring pieces support spacing and alignment where rotating parts need controlled positioning. Used during maintenance, rebuilds or parts replacement, this set suits bench work focused on restoring the original gear train arrangement of a compatible Gr. C Chassis model. It also serves as a practical reference set when comparing worn drivetrain pieces against fresh replacement components before installation. Warning! Not suitable for children under 14 years.
Gears & motor pinions
M-08/M-07/TA06 Bevel Gear Diff. Set, RC spare part
300051460soon available again
The M-08/M-07/TA06 Bevel Gear Diff. Set is an RC spare part for restoring the internal gear train of a compatible bevel gear differential. The set contains 2 bevel gear differential sets, with 2 larger bevel gears, 4 smaller bevel gears and 2 cross shafts shown in the included parts layout, giving the drivetrain the internal meshing parts needed to transfer rotation through the diff assembly. Inside the gearbox, the larger bevel gears and smaller pinion gears work together around the cross shafts to distribute drive across the axle while allowing differential action in corners. That mechanism matters when a worn or damaged gear train starts to affect smooth running, because the differential depends on accurate gear engagement at each contact point. Compatibility covers a wide range of chassis: TD4, TD2, DB01, FF-04 EVO, M-08 CONCEPT, M-07 CONCEPT, TA06 MS, TA06, TA06 PRO, TA05 Ver.II, TRF503, TRF211XM, TRF201XMW, XV-01, XV-01 PRO and XV-01T. For chassis-specific installation, TA05 Ver.II uses this set with 54312, DB01 uses it with 54329, and TD4 and TD2 use it with 54471. That makes the set a practical choice for maintenance, rebuilds and drivetrain refresh work on compatible touring, rally and buggy platforms where the differential internals need replacement. Warning! Not suitable for children under 14 years.
Gears & motor pinions
Pinion Gear 10T M0.8, model spare part, 23 mm
303505014soon available again
This 10-tooth pinion gear with module 0.8 is a compact drivetrain spare part for model applications where the gearing specification needs to match the installed setup. The 23 mm format and metal construction give the part a precise mechanical presence suited to motor and transmission assemblies. The gear body shows a toothed drive section, a central mounting opening and a fastening screw for fixing the part onto a shaft. That combination points to direct use in a powered drivetrain, where the pinion transfers motor output into the next stage of the transmission. For maintenance work, the stated 10T and M0.8 specification matters as much as the physical size, because both values determine how the replacement part meshes with the existing gear train. The metallic finish and machined form also make the component easy to identify during workshop sorting and parts checks. In practical use, this spare part fits the moments when a model needs a like-for-like drivetrain replacement or a rebuild based on the same gear standard. It also suits the parts box for ongoing service work, where clearly specified gears help keep repair and setup tasks organised. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TA-05/TB-03 Drive Shaft, metal spare part, 45 mm
300051216soon available again
The TA-05/TB-03 Drive Shaft 45 mm is a metal spare part for compatible Tamiya chassis setups, with 2 matching shafts supplied for drivetrain service on FF-03 chassis, FF-03 PRO chassis, TA05 Ver.II and TA05. The 45 mm length gives a clear fit reference when a build or repair calls for this exact shaft size. Each shaft uses a straight rod form with ball ends and cross pins, a layout designed to connect with the surrounding drivetrain hardware in the intended mounting points. The metal construction and polished finish give the part a clean technical look while keeping the focus on mechanical function inside the chassis. As a dedicated replacement component, it suits maintenance work, parts refreshes and like-for-like swaps where the named platforms require this specific format. In workshop use, the 2-piece set supports planned servicing or the replacement of worn drivetrain hardware on one of the listed chassis types. Kept alongside other RC spares, the clearly stated compatibility and 45 mm dimension make this part easy to identify before installation. Warning! Not suitable for children under 14 years.
Gears & motor pinions
TRF420/419 Gear Diff Bevel Set, model spare parts
300051567soon available again
The TRF420/419 Gear Diff Bevel Set is a drivetrain spare-parts set for selected Tamiya chassis, built around redesigned bevel gears for the newer TRF419 gear differential unit. As replacement internal parts, these gears support accurate restoration of the differential mechanism when the original bevel gears show wear through repeated running and maintenance cycles. The set is described for the TRF419 gear differential unit and also appears in the designation for TRF421X, TRF420 and TA08, making it relevant for several closely related platforms. The redesigned gear shape is specified for the newer differential unit with large oil capacity, a detail that matters when matching internal parts to the correct generation of assembly. The pack contains 2 Gear Differential Unit Bevel Sets in the GV parts category, providing a clear service quantity for workshop stock or scheduled rebuilds. This kind of spare part fits naturally into bench maintenance between race meetings, setup revisions or routine transmission overhauls. Kept alongside other drivetrain consumables, the bevel sets help return a compatible gear differential to its intended internal configuration with the correct replacement parts on hand. Warning! Not suitable for children under 14 years.