Brands

On-road RC cars (2WD/4WD)

1:10 Motul Autech GT-R, RC assembly kit, TT-02

€159.99

The 1:10 RC Motul Autech GT-R assembly kit brings the shape of the 2014-spec NISMO GT-R to the workbench in a form built for running as well as display between sessions. Its polycarbonate bodyshell captures the low, sleek lines of the Super GT GT500 machine, linking a championship-winning race car to a chassis made for regular RC use. At the centre of the kit is the TT-02 touring car chassis, the successor to the TT-01 and an entry-level platform developed to make assembly more approachable for new RC builders. The shaft-driven layout gives the car a clear mechanical base, while the included TBLE-02S electronic speed controller works with brushed and brushless setups. A 540 electric motor is supplied for the standard drive package, so the core drivetrain is already matched to the chassis concept. Tamiya also positions the TT-02 as a platform with room to grow, with compatible Hop-Up Options available for later tuning and setup changes. Once assembled, the model suits open runs on parking lots and laps on prepared circuits, where the touring car format and race body styling feel most at home. Radio gear, a battery pack, a charger and paints are required separately.

Model car kits 1:24

1:24 Nissan Skyline GT-R R34 V-Spec II model kit

€24.99

This 1:24 scale assembly kit recreates the Nissan Skyline GT-R R34 V-Spec II with the compact, muscular proportions that define the late-generation GT-R shape. The body combines the low front bumper, hood vent, side mirrors and prominent rear wing into a build that reads clearly even before paint and markings are applied. The kit is designed to depict 2 versions, V-Spec II and V-Spec II Nur, with the choice made before assembly. Optional parts in the kit include an extra GT wing stay, drilled brake discs and an exhaust pipe, allowing the finished car to follow the selected specification. The instructions also call out interior, chassis, under panel and rear wing stages separately, giving the build a clear structure across the rolling chassis, cabin and exterior sections. Clear parts are used for the windows and lights, with the taillights called out in transparent orange and red detail areas. Assembly takes 600 minutes. Paints, cement and tools are required separately. During the build, the chassis receives the interior tub, underbody panels and body shell in distinct stages, making the model well suited to a steady bench session or a longer weekend project. The painting guide lists 5 body colour finishes for the Skyline GT-R V-Spec II, including solid white and 4 metallic colours, while the decal steps cover placement and smoothing for the final exterior details.

Model car kits 1:24

1:24 Porsche 911 GT3 RS (992), plastic model kit

€45.99

This 1:24 scale plastic model kit recreates the Porsche 911 GT3 RS (992) as a static display build with a length of 190 mm, width of 85 mm and height of 56 mm. The body shape brings out the car's dramatic air vents, fins and wide performance stance, creating a display piece with strong road and circuit presence. The build focuses on details that give the finished car its distinctive European-spec character. It can be assembled in left hand drive form, and the Weissach package styling is reflected in the wheel shape plus carbon fiber sections on the hood, roof, rear wing and side mirrors. Inside, the shaped interior is joined by a roll cage, door straps and shift paddles, while decals add dashboard graphics, mesh seat surfaces, door linings and headrest logos. Metal transfers are supplied for the rear-view mirror, side mirrors and rear lights, and solid synthetic rubber tires complete the stance with a realistic road-car finish. Movable brake calipers and discs add another layer of realism when the model is viewed from low front or side angles. Masking stickers are included for painting the windows and headlight covers, helping keep these clear areas neat during finishing. Cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda CB1000F, plastic model kit

€44.99

This 1:12 plastic model kit captures the Honda CB1000F with the long, continuous lines that run from the fuel tank through the side panels to the tail. At 178 mm in length, 73 mm in height and 109 mm in width, the finished motorcycle has enough scale presence to show the roadster proportions clearly on a shelf or workbench. The bodywork uses a one-piece fuel tank and fender construction, while the optional headlight cowl allows different finishing directions based on the chosen marking version. Four marking versions are provided: Wolf Silver Metallic with a blue stripe, Wolf Silver Metallic with a grey stripe, Graphite Black, and the Japanese-market SE Wolf Silver Metallic version. Variant D adds dedicated radiator grille and quickshifter parts as well as its own decals. Small visual elements are handled with equal care, from the chrome-rimmed headlight area to the clear red taillight parts and masking stickers for the speedometer and fuel cap. The build suits careful painting and finishing sessions, with separate inner and outer brake disc parts that support more precise paint application. Vinyl tubing recreates clutch, brake and other lines, and the leather-texture seat surface adds another distinct finish contrast beside the synthetic rubber tyres. Tools, paints and modeling glue are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:12

1:12 HONDA RA273, plastic model kit, PE parts

€104.99

The 1:12 HONDA RA273 plastic model kit captures Honda's 1966 Formula 1 machine in a large-format build with PE parts and finely reproduced race-car engineering. At 333 mm long, 143 mm wide and 70 mm high, the assembled car gives the monocoque proportions, exposed mechanical sections and low body shape enough space to read clearly on the bench and in a display setting. The build centers on the historic 3-liter V12, with fuel pipes, ignition cables and 12 aluminum air funnels forming a dense engine bay that rewards close work. A removable nose cowling opens the front section for a view of inner mechanics such as the radiator, adding another layer of structural detail beyond the outer bodywork. Hollow rubber tires carry accurate tread patterns, and the kit also includes a driver figure plus markings for No.18 Richie Ginther and No.11 John Surtees. Paints and glue are required separately. The moving steering linkage and sprung suspension give the finished model extra realism while handling and positioning. During assembly, the mix of molded parts, photo-etched components and metal transfers creates a build that shifts between body shape, cockpit detail and race hardware, echoing the technical character of a mid-1960s Formula 1 car.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Ford Zakspeed Capri Turbo, plastic model kit

€30.99

The 1:24 Ford Zakspeed Capri Turbo plastic model kit brings a standout DRM racer to the workbench with a sharply rendered body, a low nose and a wide competition silhouette. At 210 mm long, 86 mm wide and 51 mm high, the finished model has the stretched proportions that made this car so distinctive on late-1970s grids. The body shape is paired with a realistically depicted cockpit, where the roll cage gives the interior a clear racing character beyond the outer shell. Wheels with aero discs and solid synthetic rubber slick tires continue that track-focused specification and help the completed model carry the right period look from every angle. High-quality Cartograf decals supply the livery markings with crisp printed detail, while the included driver figure adds another authentic element to the cabin scene. This kit suits focused bench sessions where body assembly, decal placement and interior detailing each have room to stand out. Paints and glue are required separately, and the finished model lends itself to shelf display, motorsport collections or a line-up of classic touring and DRM race cars.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche Turbo 1988, assembly kit, static model

€35.99

This 1:24 assembly kit captures the 1988 Porsche 911 Turbo in static display form, bringing the car's unmistakable silhouette into a build centered on shape, proportion and surface detail. Front and rear overfenders, the large rear wing and the broad road stance give the finished replica the visual weight that made the Turbo such a standout within the 911 line. The body design is newly created to suit the extra wide tires, so the model reflects the fuller arches and planted look of the road car rather than a standard narrow-body layout. Under the chassis, realistic engine detailing and a separately molded exhaust pipe add mechanical definition that remains visible when the model is handled or displayed from a lower angle. Synthetic rubber tires add tread texture that contrasts with the hard body surfaces, and metal transfers refine the mirrors and logo with a crisp finish that printed markings cannot match. Assembly time is stated as 600 minutes. Instructions and decor are included. Paint and cement are required separately. On the workbench, the kit supports a measured build with trimming, painting and decal placement shaping the final appearance step by step. Once completed, the model suits shelf display, cabinet presentation or placement alongside other 1:24 sports car subjects, where the widened bodywork and rear wing immediately mark out the Turbo identity.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Mazda RX-7 R1, plastic model kit

€25.99

The 1:24 Mazda RX-7 R1 captures the compact proportions, curved bodywork and prominent rear wing of Mazda's rotary sports coupe in a static display model kit. During the build, the body, chassis and interior come together as separate assemblies, creating a finished car with visible structure from the engine bay to the cabin. The kit goes beyond an outer shell by guiding the assembly of a multi-part engine that is installed into the front bay, followed by a support strut across the compartment. Front suspension, rear suspension, uprights and wheel installation are handled in dedicated stages, which gives the underside and running gear their own defined detail. Inside, the dashboard, steering area, center console and seats are assembled before the interior tub is fitted into the body. Clear window parts are installed from the inside, and rear body sections add the taillight panel, spoiler and trim pieces that shape the final silhouette. This layout suits builders who enjoy painting and finishing as part of the project, with callouts for body color, interior variations, trim details and metallic effects across the assembly sequence. Assembly time is stated as 600 minutes. Paints, cement and tools are required separately.

Model car kits 1:24

1:24 Mercedes-Benz 300SL, plastic model kit

€60.99

This 1:24 plastic model kit captures the Mercedes-Benz 300SL with the long hood, compact cabin and unmistakable gullwing door layout that made the original road car a lasting reference point in sports car design. The finished model measures 188 mm in length and 75 mm in width, giving the coupe a compact display footprint while leaving room for visible body contours, chrome-style trim and interior detail. A recreated tubular space frame brings one of the 300SL's most distinctive engineering features into the build, and the engine sits beneath an opening hood with a faithful depiction of the power unit. The gullwing doors also open, and small support struts allow the doors to be shown in the raised position. Nylon mesh is included for the front air intake, while metal-plated parts reproduce side bars, bumpers and other exterior trim. Metal transfers add emblem and mirror details, and masking stickers help define painted window areas during finishing. With an assembly time of 600 minutes, the kit suits a slower, detail-focused build where bodywork, trim and mechanical features can be finished step by step. On a shelf, desk or display cabinet, the opening panels and visible frame structure give the model different viewing angles, from the engine bay to the roof-hinged doors that define the 300SL silhouette. Paints are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota Supra, plastic model kit

€28.49

This 1:24 Toyota Supra plastic model kit recreates the 1993 sports coupe as a static display build with the strong proportions that defined the full-size car. The wide body, oversized rear wing and distinctive coupe profile give the finished model a planted look that stands out on a shelf, while the steerable front wheels add a mechanical touch during final positioning. Construction focuses on the areas that give the car its character. The kit reproduces the engine bay and interior, so the build moves through chassis work, cockpit detail and front-engine installation rather than only closing up a body shell. Wheel assembly follows the original staggered layout with narrow front tyres and wide rear tyres, and the instructions also show left- and right-side specific parts for the front upright setup. Builders can finish the body in 1 of 6 documented colour schemes for the 1993 Supra, including Metallic Silver, Super Red, Super White, Black, Deep Blue and Dark Brownish Gray Mica, with black or two-tone interior treatments. Assembly time is stated as 600 minutes. Cement and paints are required separately. Once completed, the model suits display in a cabinet, on a desk or alongside other 1:24 road car builds, where the detailed bodywork, cockpit and engine area reward viewing from several angles.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi R8 LMS 2008, RC assembly kit, TT-02

€169.99

The Audi R8 LMS 2008 arrives here as a 1:10 R/C assembly kit that combines GT3 race car presence with the proven TT-02 platform. Its 1.0 mm polycarbonate body recreates the shape of the 2008 LMS with a low roofline, pronounced side sections and a large rear wing, giving the finished car a sharp circuit look whether it is lining up on the floor or resting on a shelf between runs. The TT-02 chassis uses a shaft-driven 4WD layout, and the kit also includes an ESC and a Type 540 Torque-Tuned motor for a complete core drive package. With overall dimensions of 434 mm x 194 mm x 120 mm and a 257 mm wheelbase, the chassis sits in classic touring car territory and gives the body its long, planted proportions. Black 16-spoke wheels and racing slick tires complete the competition style, while stickers and masking stickers support the paint process and help bring the race livery to life with cleaner window lines and graphic placement. This assembly kit suits bench sessions focused on body finishing, decal work and chassis building, then moves naturally into on-road driving once the separately required equipment is added. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Citroen 2CV Charleston, RC assembly kit

€144.99

This 1:10 RC assembly kit captures the Citroen 2CV Charleston in the distinctive 1982 model year form, pairing its rounded bodywork with the compact M-05 front-wheel-drive chassis. The lightweight polycarbonate shell gives the classic silhouette a clean, crisp presence on the track, while separate molded parts recreate details such as the front bumper support, headlights and side mirrors. The M-05 chassis uses a monocoque structure and a 239 mm wheelbase, with the motor, battery pack, receiver, servo and ESC arranged for balanced weight distribution and a low center of gravity. A 3-piece steering linkage works with 4-wheel independent double wishbone suspension to support stable cornering, and tread-patterned radial tires with inserts sit on 11-spoke wheels in gun metal color. The included ESC is compatible with brushed and sensor-based brushless motors, and the set also comes with a 540-type motor for the drive system. Hop-Up Option parts are available for the M-05 platform for further chassis tuning. On a smooth indoor surface or a paved outdoor run, the compact front-wheel-drive layout gives the model a direct, lively character that suits repeated laps and careful line placement through tighter sections. Radio gear, a battery pack, a charger and paints are required separately.

Model car kits 1:24

1:24 Subaru Impreza WRC 98, plastic model kit

€26.99

The 1:24 Subaru Impreza WRC 98 plastic model kit brings late-1990s rally character to the workbench with a compact competition body, bold WRC styling and the visual punch of the Monte-Carlo specification. In the finished build, the blue bodywork, yellow graphics, gold wheels and clustered front auxiliary lamps create the unmistakable look of a stage car prepared for low-visibility rally sections. This assembly kit is supplied as an unbuilt model and calls for a full build process over 600 minutes. The source material highlights exterior details such as the hood scoop, side mirrors, roof antennas, rear wing and racing interior, all of which help define the car's competition identity at 1:24 scale. Markings visible on the car include Subaru branding, competition number 3, McRae and Grist name graphics, plus period sponsor logos that sharpen the replica finish. Paints and cement are required separately. On the bench, the model suits careful trimming, bonding, painting and decal work, with each step adding definition to the body lines and rally equipment. Once completed, the car fits naturally into a motorsport display, especially alongside other 1:24 competition machines, where the Monte-Carlo light pod and WRC aero parts stand out immediately.

On-road RC cars (2WD/4WD)

1:10 Audi quattro A2, RC assembly kit, TT-02

€154.99

The 1:10 Audi quattro A2 RC assembly kit pairs a classic rally silhouette with the TT-02 platform, creating a build that looks purposeful on the bench and tracks cleanly on paved surfaces. At 458 mm long and 187 mm wide, the finished car carries the wide-arched proportions, rear wing and period body lines of the quattro A2 in a clear polycarbonate bodyshell. Separate ABS parts add definition to the front and rear light cases, fog lamps, side mirrors and wing details, while silver 5-spoke wheels match the competition look. The main headlight buckets can be fitted with separately sold LEDs, adding another layer of scale realism to evening display or running sessions. Under the shell, 4-bevel differential gears and double wishbone suspension help the chassis deliver smooth cornering response. The TT-02 layout is known for its adaptable design, and the 257 mm wheelbase suits the body proportions closely. This kit suits builders who want the hands-on process of trimming, painting and finishing a rally car body before taking it onto smooth ground for RC driving. Radio gear, a battery pack, a charger and paints are required separately. Optional TT-02 tuning parts are also available for those who want to refine the setup further after the first runs.

On-road RC cars (2WD/4WD)

1:10 Nissan R91CP 1992, RC assembly kit

€179.99

The 1:10 Nissan R91CP 1992 RC assembly kit brings the long, low stance of a Group C racer into a detailed build with a polycarbonate bodyshell, separate black body accessories and a cockpit set with styrene driver figure. At 480 mm long, 204 mm wide and 109 mm high with a 280 mm wheelbase, the finished model carries the stretched proportions that define this endurance machine. The body is supplied unpainted, with included decals and pre-drilled body post holes that streamline shell preparation while leaving the final finish open to the chosen livery. Separate side mirrors, spoiler mounts, air intake and windshield wipers add layered exterior detail, and the light cases are moulded into the shell with no provision for LEDs. Underneath, the proven Group C Vintage platform pairs front and rear space frames with FRP plates in an ABS bathtub layout. The rear section uses a rigid axle, while the front end keeps its own independent movement for a layout that reflects classic RC circuit design. On a smooth track or a large indoor running area, the high-grip sponge tires and 5-spoke gunmetal wheels suit fast, flowing laps and stable corner entry. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Opel Kadett GT/E Rally, RC assembly kit

€179.99

The 1:10 Opel Kadett GT/E Rally RC assembly kit combines classic rally bodywork with the adaptable MB-01 chassis, creating a build that balances scale character and chassis tuning. The painted bodyshell, number 16 markings and 4 auxiliary front spotlights give the coupe a clear period competition presence while the compact platform keeps the mechanical layout visible and accessible during assembly. The MB-01 platform allows 3 wheelbase choices of 210 mm, 225 mm and 239 mm by changing the joint section between the lower deck and sub deck. Steering linkage length changes with the selected wheelbase, with the manual showing 84 mm settings for MR S and MR M plus an 87 mm setting for MR L. The chassis also allows a change between FF and MR layouts by reversing the differential unit direction, and that conversion calls for corresponding rebound screw settings of 1.0 mm at the front and 2.5 mm at the rear. In MR form, a high motor position can also be selected, and the electronics positions change accordingly. This assembly kit suits builders who enjoy adjusting layout as well as body style, whether the focus is shelf display between runs or testing different chassis configurations on a low-grip surface. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 GT3 (992), RC assembly kit, TT-02

€159.99

The Porsche 911 GT3 (992) arrives here as a 1:10 R/C model assembly kit with the low, wide stance and track-focused shape of the road car translated into a detailed polycarbonate shell. At 467 mm long, 188 mm wide and 131 mm high, the body gives the chassis a planted on-road profile, while the separate polycarbonate rear wing and light cases add extra depth to the finished exterior. Under the shell, the model uses the TT-02 platform with shaft-driven 4WD and a 251 mm S-size wheelbase. That layout keeps the driveline direct and leaves room for the adaptable chassis design that has made the TT-02 a long-running choice for touring car builds. A Type 540 Torque-Tuned motor and included ESC complete the drive package named in the kit contents. The body set also uses separate black molded parts for the side mirrors and wing stays, plus a Urethane Bumper L compatible with TT-01 and TGS applications. This assembly kit suits bench building, body finishing and on-road driving as distinct parts of the hobby. Stickers and masking stickers support the paint process and exterior markings, while radio gear, a battery pack, a charger and paints are required separately before the chassis can run.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 GT3 R (992), RC assembly kit

€169.99

The Porsche 911 GT3 R (992) arrives here as a 1:10 RC assembly kit with the low, wide stance and track-focused shape of the full-size race car translated into a detailed polycarbonate bodyshell. At about 479 mm long, 188 mm wide and 127 mm high, the model carries strong visual presence on the bench and on the circuit, with a separate polycarbonate rear wing and separate light cases sharpening the finished outline. Under the body, the shaft-driven 4WD TT-02 chassis uses a short 251 mm wheelbase and a layout known for straightforward adaptability. Black molded parts depict the side mirrors and wing stays, adding crisp contrast against the painted shell. Black 10-spoke wheels and slick tires complete the GT race look with a setup suited to smooth surfaces. The kit also includes stickers and masking stickers for the paint job, plus a urethane bumper to help keep the body in good condition during use. The result suits measured assembly sessions as much as running time, with each stage adding visible race-car detail before the chassis takes to the floor. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 The Hornet by Jun Watanabe, RC buggy

€144.99

The Hornet by Jun Watanabe takes the familiar 1:10 RC buggy format and gives it a striking fashion-led finish. The white bodyshell carries oversized black polka dots, while pink front wheels, purple chassis parts and pink to purple side graphics create a look that reads clearly even at speed across open ground. The studio details show a buggy built around classic off-road cues rather than a closed touring shape. An enclosed cockpit with driver figure, a front bumper bar and a large rear wing define the silhouette, while the black windshield frame and round white front lights sharpen the contrast across the body. Rear paddle tyres indicate a setup aimed at loose terrain such as sand, where the tread can dig in and help the driven axle find traction. Visible coil-over shocks and exposed suspension arms underline the mechanical layout and keep the chassis character on show instead of hiding it under bodywork. This version suits shelf display as strongly as running sessions, because the graphic treatment stays readable from a distance and the color blocking picks out the buggy lines from every angle. Radio gear, a battery pack and a charger are required separately.

On-road RC cars (2WD/4WD)

1:10 Toyota Supra (JZA80), RC assembly kit, 2WD

The 1:10 Toyota Supra (JZA80) RC assembly kit combines the long, low shape of Toyota's 1993 flagship sports car with the configurable BT-01 platform for hands-on on-road running. At 457 x 185 x 135 mm, the finished model carries the Supra profile with a wide stance, a defined nose and the visual presence of a full-size coupe scaled for the bench and track. The BT-01 center frame is designed so the battery pack, motor and RC equipment setup can stay in place while the final gears and steering linkage are repositioned to change the drivetrain layout. That structure allows front-wheel drive, front-motor rear-wheel drive and midship rear-motor rear-wheel drive choices, with 6 setups available in total. Unitized sections for the motor mount, final gears and suspension keep the chassis layout organized during the build and during later maintenance. A Type 540 Torque-Tuned motor and ESC are included, and many Hop-Up Option parts for TT-chassis cars can be used for further setup tuning. The 4-wheel double wishbone suspension mirrors left to right and works with friction dampers for a clear, mechanical on-road setup. The 1.0 mm polycarbonate body gives the shell its light form over the chassis, making the Supra lines stand out during painted display and radio-controlled driving sessions alike. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda CB 750F Custom Tuned, model kit

€27.49

The 1:12 Honda CB 750F Custom Tuned model kit turns a classic motorcycle shape into a focused scale build with a long, detailed assembly process. Over 600 minutes, the assembly kit develops from individual parts into a road-bike replica with a compact display footprint and the visual balance that makes 1:12 motorcycle subjects so appealing on a shelf or desk. The subject matter brings together several standout details from the full-size machine: a round front headlight, a black seat, alloy-style wheels, dual rear shocks, mirrors, handlebars and an exposed multi-cylinder engine layout. Blue striping across the white and silver bodywork adds contrast to the tuned street-bike look, while the black exhaust system gives the lower section a darker visual line. Paints are required separately for the finish, and the colour guidance in the data covers flat, gloss and metallic tones as well as clear orange and clear red for small lighting details. This model suits hobby sessions that focus on careful trimming, painting and final display rather than quick assembly. Once completed, the Honda CB 750F Custom Tuned works well as a standalone motorcycle model or as part of a broader 1:12 collection with other road and racing machines.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda CB750F, motorcycle model kit

€24.99

This 1:12 motorcycle model kit recreates the Honda CB750F with the low handlebar stance, rear-set footrest layout and smooth line from fuel tank to tail that defined the road bike's early-1980s character. The finished display combines classic naked-bike proportions with visible mechanical structure, so the machine reads clearly from every angle on a shelf or workbench. The build centers on a detailed inline 4 engine made up of cylinder, carburettor and crankcase assemblies, with vinyl tubing sections cut to 1.5 cm, 2 cm, 2.5 cm, 4 cm, 4.5 cm, 5 cm, 8.5 cm and 9.5 cm for realistic routing across the frame and engine area. Front and rear tyres, 1.6 mm x 20 screws, 1.6 mm x 5 screws and a 50 cm vinyl tubing length are included in the kit contents. The bodywork can be finished in silver, red or black, and the decal sheet provides the matching striping sets for each body colour. Paints are required separately. Assembly unfolds across the engine, swing arm, mufflers, front fork, rear fender and fuel tank, giving each stage its own visual milestone as the motorcycle takes shape. On a display shelf, the chrome-look exhausts, disc brake layout, cast wheels and compact four-cylinder form create a strong period road-bike presence that suits classic motorcycle collections.

Model motorcycle kits 1:12

1:12 Honda NSR 500 Factory-Color, motorcycle model kit

€21.99

The 1:12 Honda NSR 500 Factory-Color motorcycle model kit brings Grand Prix racing character to the workbench through a full-fairing race bike finished in Honda factory livery. Red, white and blue panels, the number 3 race markings and period sponsor graphics shape a machine that looks ready for the paddock stand between sessions. The assembly kit format focuses attention on the motorcycle's racing structure rather than on a simplified silhouette. A tinted windscreen sits above the front fairing, while the front disc brake, chain drive and dual rear exhausts add the mechanical detail that gives this model its competition identity. White wheels contrast with the black seat and help the bodywork stand out once the decals are in place. Visible frame and suspension areas add depth around the fairing and tail section, so the finished build reads convincingly from more than one angle. With a stated assembly time of 600 minutes, this kit suits longer bench sessions where subassemblies, paintwork and markings can be handled with care. The finished motorcycle works well as a display piece on a shelf, in a motorsport collection or alongside other scale racing machines with a similar era and theme.

Model motorcycle kits 1:12

1:12 Honda RS1000, scale model kit

€33.99

The Honda RS1000 Endurance Racer arrives as a 1:12 scale model kit that brings a classic racing motorcycle into a focused build with clear display appeal. The long fairing, low riding position and endurance-racing silhouette give the finished machine a purposeful look that stands out on a shelf, desk or in a collection cabinet. This kit centers on the motorcycle itself rather than on extra accessories, keeping attention on the RS1000 form and the proportions that define this racing machine. The 1:12 scale offers enough presence to make the body shape and overall stance easy to appreciate once assembled. As a model kit, the hands-on process is the core of the experience, with each stage contributing to a finished replica that reflects the character of the original Honda racer. The racing theme also makes this a strong fit alongside other scale motorcycles and motorsport subjects. On a worktable, the build suits steady, detail-focused sessions where the shape of the fairing and the stretched race layout gradually take form. Once completed, the model works equally well as a standalone display motorcycle or as part of a broader two-wheel racing lineup.

RC trucks

1:14 Scania R470 Highline, RC truck kit

€399.99

The Scania R470 Highline brings modern European tractor-truck styling into Tamiya's 1:14 RC series with a tall cab, long wheelbase proportions and a substantial 452 mm overall length. At 187 mm wide and 293 mm high, the model has the stance of a full-size long-haul machine, whether it is parked on display or moving through a scale transport scene. A 272 mm wheelbase sets the chassis layout, while front and rear tread measurements of 156 mm and 138 mm shape the truck's planted look on the road. The tyres measure 22 mm in width at both ends, with an 83 mm diameter front and rear, matching the heavy commercial character of the subject. The 3-speed transmission adds a mechanical layer to the build, with gear ratios of 32.49:1 in 1st, 17.76:1 in 2nd and 10.66:1 in 3rd. Fully equipped weight is about 3.1 kg without multi function unit. As a kit, this model suits builders who enjoy working through a detailed truck platform and then using the finished machine with compatible trailers in a scale haulage setting. The Highline cab shape, realistic dimensions and multi-gear drivetrain give the finished truck a convincing presence during coupling, manoeuvring and road running.  Warning! Not suitable for children under 14 years.

Model car kits 1:20

1:20 Toyota Celica LB Turbo Gr.5, plastic model kit

€46.99

This 1:20 plastic model assembly kit captures the Toyota Celica LB Turbo Gr.5 in the dramatic proportions of a late-1970s silhouette racer. At 240 mm long, 105 mm wide and 61 mm high, the finished car brings the low nose, boxed arches and large rear wing into a display size that shows the shape clearly from every angle. The build goes beyond the outer bodywork with an authentic cockpit, roll cage and inline-4 engine layout. Removing the front cowl reveals the engine detail after assembly, so the finished model can be shown with mechanical features on view as well as with the body closed. The kit also includes a full body driver figure for the cockpit, adding a human scale reference inside the racing interior. Solid synthetic rubber slick tires complete the competition look with the broad, smooth tread style associated with circuit cars of the period. For finishing, the kit provides high quality Cartograf decals and 2 marking options to depict car no.68 or no.56. That choice lets the build lean toward 2 distinct race identities while keeping the same body and mechanical layout. Assembly time is stated as 600 minutes. Paint and cement are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Honda Prelude XX, plastic model kit

This 1:24 plastic model assembly kit brings the Honda Prelude XX into a compact 180 x 82 x 53 mm format, translating the coupe's low, aerodynamic profile into a build with crisp proportions and a strong road-car character. The finished shape reflects the distinctive lines of the second-generation Prelude, from the nose to the cabin and rear deck. The bodywork is supported by shaped interior, suspension and chassis components, giving the build substance beyond the outer shell. Updated decals add model-specific detail to front and rear emblems, the head cover logo, speakers and wheel center emblems, so the finished car carries finer period-correct markings across multiple areas. A transparent windshield part replaces the earlier transparent brown version, changing the look of the glazing and sharpening the visual balance of the front section. The instructions show 2 paint approaches: red, or a two-tone scheme in navy blue and light gun metallic. The instruction manual uses Japanese and English text. On the bench, the separate chassis and interior sections support a measured, step-by-step build, while the decal placement and paint choices give the model a distinctly early-1980s road-car finish. Once completed, the 1:24 scale size sits neatly on a shelf or in a display case without demanding much space.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan Skyline GT-R V-Spec, plastic model kit

€25.49

This 1:24 plastic model kit recreates the Nissan Skyline GT-R V-Spec R33 with the long, low coupe shape, blistered front and rear fenders, and the large rear wing that defines the car's road-going performance look. The body can be finished in 1 of 7 color schemes named in the instructions, including Midnight Purple, Deep Marine Blue, White, Spark Silver, Dark Grey Pearl, Black and Super Clear Red. The build is structured through distinct subassemblies, including the rear axle, front axle, exhaust system, interior and exterior trim. The underside is not treated as a flat base alone: the instructions show separate rear suspension elements, axle shafts, exhaust routing and a front underguard, which gives the finished model more depth when viewed from low angles. Inside the cabin, the tub, seats, dashboard, steering wheel and center console are assembled as individual parts, and the dashboard receives a dedicated instrument decal. Left and right tyres use directional tread patterns, so wheel installation follows the marked rotation layout shown in the guide. Assembly is required, with a stated build time of 600 minutes. The box contains the assembly kit. Paints, cement and tools are required separately. On the bench, the sequence moves from chassis and cabin work to body fitment, then to mirrors, lamps, spoiler and markings, creating a focused car-model project with mechanical detail, trim definition and a recognisable GT-R silhouette at display scale.

Model car kits 1:24

1:24 Toyota Celica GT-Four, plastic model kit

€24.99

The 1:24 Toyota Celica GT-Four captures the compact, muscular shape of the rally-bred coupe in a static display model that puts body form, surface detail and careful finishing at the center of the build. The large rear spoiler, hood intake, quad headlight layout and coupe profile give the finished car a strong road-going stance that stands out in a cabinet or on a desk. This kit is part of the 1/24 Sports Car Series No. 133 and is supplied as an assembly kit for a full build that extends well beyond the outer shell. The body is joined by a reproduced engine bay, a separate interior with dashboard, center console and seats, and clear window parts that define the glazing cleanly once fitted. The instructions also show left-hand and right-hand steering configurations, adding another layer of model-specific detail during construction. Paint guidance is extensive, with body colours and smaller trim areas called out across the build, and decals are used to complete exterior markings and finishing touches. With an assembly time of 600 minutes, the project suits measured work sessions where trimming, test fitting, painting and decal placement can each get proper attention. Plastic cement and paints are required separately. Once completed, the Celica GT-Four works equally well as a focused weekend build spread across stages or as a longer bench project built up section by section.

Model car kits 1:24

1:24 Volkswagen Beetle 1300 1966, model kit

€27.99

This 1:24 Volkswagen Beetle 1300 1966 model kit brings one of the most recognisable compact cars into a static scale build with the unmistakable rounded roofline, curved fenders and period detailing of the classic Beetle. The finished model captures the character of the 1966 version, a form widely regarded as one of the clearest expressions of the original design. The assembly kit is built around reproduced exterior and interior sections, so the shape of the cabin, body and trim develops step by step during construction. Openable front hood and rear engine lid add another layer of detail to the completed car, allowing the model to be viewed as more than a sealed silhouette on a shelf. The source vehicle was known for its platform chassis, air-cooled flat-four engine and four-wheel independent suspension, details that help define the Beetle's place in automotive history. Cement, paints and tools are required separately. On a desk, in a display cabinet or alongside other classic road car builds, the compact 1:24 format gives the Beetle a strong presence without demanding much space. The 600 minute assembly time suits a longer, steady build rhythm, with painting, fitting and finishing shaping the final look of this 1966 Volkswagen icon.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Citroen Traction Staff Car, assembly kit

€31.49

This 1:35 Citroen Traction 11CV assembly kit recreates a staff car known for its low, elegant silhouette and distinctive fenders, bringing a classic French sedan into military and civilian WWII displays. At 125 mm long and 48 mm wide, the finished model has a compact footprint that fits naturally into dioramas while still leaving room for body contours, grille detail and cabin features to stand out. The original vehicle was notable for monocoque construction, front-wheel drive and torsion bar suspension, and the kit reflects that character in its detailed underbody and suspension areas. The suspension layout is designed with assembly in mind by keeping the parts count controlled in that section. Open-door construction reveals the interior more fully, while the closed-door option keeps the body lines uninterrupted. The included driver figure adds a seated crew presence that suits command, transport or roadside scenes. Marking choices cover 4 finishes: 2 German Army versions, 1 French Army version and 1 civilian vehicle, so the same build can be placed in very different historical settings. On its own, the Citroen works as a compact display model; alongside other 1:35 subjects, it helps build a fuller street, depot or field headquarters scene. Cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:6

1:6 Honda CB750F 1979, plastic assembly kit

€104.99

The 1:6 Honda CB750F 1979 plastic assembly kit recreates one of Honda's best-known late-1970s road bikes with a strong focus on shape and mechanical realism. The finished model brings out the machine's curved tank and body lines, while metal plated parts on the forks and exhausts give the motorcycle its period-correct contrast of painted surfaces and bright metal accents. At the center of the build is an air-cooled inline 4-cylinder engine with 4 carburetors, detailed cooling fins and spark plug cables depicted with vinyl tubing. This combination gives the engine area real depth instead of a simplified block appearance. The front fork assembly uses metal parts and coil springs, so the suspension can move after assembly. With side covers designed to be removable, the internal mechanisms remain visible whenever a closer look at the bike's construction is wanted. An assembly time of 600 minutes supports a slower, detail-focused build with room for careful painting and finishing. Paints are required separately. On a shelf, in a hobby room or alongside other large-scale motorcycle models, the CB750F stands out through its exposed engine layout, plated exhaust finish and the unmistakable silhouette of a 1979 superbike.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:6

1:6 Honda CRF 1000L Africa Twin, motorcycle kit

€254.99

The 1:6 Honda CRF 1000L Africa Twin assembly kit brings Honda's modern adventure touring motorcycle into a large display scale that gives the bodywork, engine area and chassis layout real visual presence on the bench and on the shelf. Inspired by the CRF1000L released in 2015, the subject draws on the look of Honda's Paris-Dakar-winning off-road heritage while presenting the proportions of a contemporary long-distance machine. At this size, the stepped seat, tall windscreen, handguards, mirrors, rear rack and exposed header pipes read as distinct parts rather than small impressions, which gives the finished motorcycle a more convincing mechanical character. The full-size CRF1000L is defined in the source material by a 998cc parallel-twin engine, 92 hp, dual clutch transmission, selectable torque control and ABS brakes, and that technical identity shapes the model's detailed appearance. The assembly time is stated as 600 minutes. Assembly kit contents are included; tools, cement and paints are required separately. On a worktable, the large-format parts layout suits careful painting and staged sub-assembly. Once completed, the motorcycle's red, white and blue graphics, gold wheel finish and upright enduro stance create a display piece that stands out in a collection of road, rally or motorcycle subjects.  Warning! Not suitable for children under 14 years.

RC trucks

Tamiya RC Volvo Bundle

Product bundle consisting of: 1:14 RC EU Truck Volvo FH12 Globe.420 Ki / 1/14 Tractor Truck Driver Fig. / TS-47 Chrome Yellow Gloss 100ml Article number: 300056312 Product: 1:14 RC EU Truck Volvo FH12 Globe.420 Ki Tamiya is delighted to announce that this classic is once again to be produced, returning another big name to the 1/14 Scale Tractor Truck Series. The R/C model was first released back in 2000 and recreates the Volvo FH12, a huge-selling vehicle with 12-liter turbocharged "Euro 2" engine that won the Truck of the Year in 1994. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Article number: 300056536 Product: 1/14 Tractor Truck Driver Fig. Add a whole new level of realism to your 1/14 scale tractor truck with this assembly figure, which was originally included in the Grand Hauler (Item 56344). It is now available as a separately-sold Option Part. Figure Parts x1 Can be attached with double-sided tape, or cement. Note that some models may require modification of figure for attachment.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Alfa Romeo Giulia Sprint GTA RC assembly kit

€174.99

This 1:10 RC assembly kit brings the Alfa Romeo Giulia Sprint GTA Club Racer into a compact on-road format with a prepainted polycarbonate bodyshell, classic racing proportions and a 385 x 167 x 132 mm overall size. The 225 mm middle wheelbase and MR layout named in the data place the focus on a nimble, planted chassis setup for detailed scale driving. At the center is the MB-01 chassis, a compact 2WD platform designed around configurable drivetrain choices. Final gears and steering linkage can be reattached to change between front- and rear-wheel drive without removing the battery pack, motor or RC equipment from the center frame. For rear-wheel drive cars, the motor position can be set low or high, adding another tuning option within the same chassis architecture. The kit also uses symmetrical 4-wheel double wishbone suspension with friction dampers, plus unitized motor mount, final gear and suspension sections that simplify access during setup and maintenance. An electronic speed controller and 540 motor are included. On the bench, the prepainted body and included stickers support a club-racer inspired finish with less body preparation before assembly. On the road, the 60 mm front and rear tires suit the compact touring-car stance, and the data specifies 60D tires for tire changes. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Alfa Romeo Giulia Sprint GTA, RC assembly kit

€164.99

This 1:10 R/C assembly kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer on the MB-01 chassis, pairing classic touring car lines with a compact 2WD platform. The lightweight polycarbonate bodyshell captures the shape of the 1965 coupe in a format sized at 385 mm long, 167 mm wide and 132 mm high, creating a focused build that carries period racing character onto the track. A 225 mm middle wheelbase defines this version of the MB-01, with the motor mounted in a midship rear position for rear-wheel drive. The chassis design allows 3 wheelbase choices, and the drivetrain layout can be changed between front- and rear-wheel drive by altering the attachment directions of the final gears and steering linkage while the battery pack, motor and R/C equipment remain on the center frame. Rear-wheel drive setups can also use a low or high motor position. The kit runs on 60 mm front and rear tires and uses 60D tires when replacements are needed. Stickers are included to create a club racer design inspired by amateur-driven competition cars. The 4-wheel double wishbone suspension and friction dampers suit smooth circuit running, while the unitized motor mount, final gears and suspension sections keep the mechanical layout easy to follow during assembly and maintenance. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi 90 quattro Racing, RC assembly kit

€179.99

The Audi 90 quattro Racing arrives here as a 1:10 R/C assembly kit on the TT-02 platform, pairing classic 1989 touring car lines with a chassis layout built for controlled on-road running. At 446 mm long, 192 mm wide and 127 mm high, the finished model carries the broad fenders, deep front treatment and tall rear wing that defined the race machine's silhouette. The bodyshell is formed in polycarbonate and comes pre-painted in White PS-1 with Smoke PS-31 windows, so the main body finish is already in place before final detailing begins. Wheel arches are pre-cut and body mount holes are pre-made, which streamlines shell preparation while leaving the final finishing work to the builder. A 540 torque-tuned motor and electronic speed controller are included as part of the drive package. The 251 mm wheelbase gives the chassis the proportions used by many 1:10 on-road builds, and the included urethane bumper helps protect the bodyshell during close running. Radio gear, a battery pack and a charger are required separately. On a smooth indoor track or open asphalt space, the low touring car stance, slick tyre setup and 4WD drivetrain suit repeated laps, measured steering inputs and clean acceleration out of bends. The finished model also carries the visual character of the original Audi racer, making it equally satisfying between driving sessions on a shelf or workbench.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Ford Escort MkII Rally, RC model kit

€199.99

The 1:10 Ford Escort MkII Rally RC model kit pairs a classic rally shape with the MF-01X chassis, creating a machine that looks at home kicking up dust on flat dirt or tracking cleanly across asphalt. Its clear polycarbonate body recreates the Escort MkII form with a lightweight shell, while molded ABS parts for the bumpers, side mirrors and fog lights bring extra definition to the exterior. Under the shell, the MF-01X layout uses a rear-mounted 540 Torque Tuned motor, a propeller shaft and gear differentials to drive all 4 wheels. The chassis frame combines a 3-segment structure with a 2-piece frame and gearbox housing, giving the running gear a compact, purpose-built layout. At 414 mm in length with a 239 mm L wheelbase, the model carries the long-wheelbase rally setup specified for this body. The chassis can also be converted to other wheelbase formats with separately sold parts, and it remains compatible with previous M-chassis bodies. An electronic speed controller is included. The decal sheet finishes the shell with sponsor logos and period rally graphics, while the front and rear light cases are compatible with separately sold 5 mm LEDs for an illuminated display or night-stage look. Radio gear, a battery pack, a charger and paints are required separately. On a shelf, the Escort body and rally markings deliver strong historic motorsport character; on the ground, the 4WD layout and suspension setup support running across mixed surfaces.

Off-road RC cars

1:10 Ford F-150 Ranger XLT, RC model kit

€374.99

This 1:10 RC model kit brings back the Ford F-150 Ranger XLT as a reissue of the 1981 release, capturing the angular lines and pickup stance of the seventh-generation F-series in a 430 x 215 x 185 mm format. The ABS body is shaped with triangular side windows on the cab, and the stealth front body mount removes visible mounting holes at the nose for a cleaner scale appearance. Freshly moulded exterior parts add detail across the shell, including side mirrors, windscreen wipers, headlights, a front grille section and bumper protection. An updated decal sheet supports the period finish, and the body also carries a driver figure for a fuller cockpit presentation. Ford emblems are reproduced at the front and rear, reinforcing the character of the full-size truck. The complete model weighs 1880 g, giving the chassis and body combination a planted feel in motion. Under the shell, a 540 electric motor and electronic speed controller form the drive package, with electronics and the 7.2 V battery area covered by a transparent housing. Radio gear, a battery pack, a charger and paints are required separately. On a shelf, the pickup reads as a detailed vintage reissue; on the ground, the long body, rear sand tyres and 2WD layout suit loose-surface running with a classic off-road stance.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mercedes-AMG GT3, RC assembly kit, TT-02

€159.99

The 1:10 Mercedes-AMG GT3 RC assembly kit pairs the dramatic shape of the GT3 race car with the TT-02 chassis, creating a build that stands out with a long hood, low roofline and prominent rear wing. Its transparent polycarbonate body captures the full-size car's competition form in a lightweight shell that takes paint and markings for a finished race-ready look. At 453 mm long with a 257 mm wheelbase, the model has the proportions of a modern GT racer, and separately molded side mirrors and rear wing parts sharpen that outline further. The body is designed for PS-63 Bright Gun Metal, with PS-55 Flat Clear applied on the outside to achieve the matte finish described in the kit data. Stickers and masking stickers are supplied for the car's markings and paint layout, supporting a cleaner, more defined result across windows, lights and body graphics. The TT-02 platform is built as an entry-level chassis with scope for tuning, and the available option parts line gives room to refine the setup over time. This kit suits workbench sessions focused on body finishing, decal placement and chassis assembly, then moves naturally into on-road running once the build is complete. Radio gear and a battery pack are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mercedes-Benz 190 E EVO II, RC assembly kit

€174.99

The Mercedes-Benz 190 E 2.5-16 EVO II 1991 arrives here as a 1:10 RC assembly kit on the TT-02 chassis, pairing a classic DTM silhouette with a shaft-driven 4WD layout built for controlled on-road running. At 445 mm long, 184 mm wide and 137 mm high, the model carries the compact proportions and extended aero surfaces of the race car into a size that reads clearly on the track. The bodyshell uses 1.0 mm polycarbonate to form the over fenders, front spoiler, rear spoiler and large rear wing, while separate black ABS parts reproduce the side mirrors, front grille and emblems as distinct components. A 257 mm wheelbase gives the chassis a widely used touring car format, and the TT-02 layout is known for its straightforward shaft drive arrangement and stable footprint. Silver dish wheels and racing slick tires suit smooth surfaces, and the included stickers plus masking stickers support an accurate paint finish with the 1991 race livery. This setup suits bench assembly, body finishing and regular circuit sessions in equal measure, with the visual character of the DTM machine carrying through once the shell is painted and mounted. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 Carrera RSR, RC assembly kit

€164.99

The 1:10 Porsche 911 Carrera RSR RC assembly kit brings classic racing shape to the TT-02 platform, pairing a detailed polycarbonate body with shaft-driven 4WD for controlled running on a proven chassis. At 457 mm long, 204 mm wide and 136 mm high, the model carries the low, wide stance of the original car while the integrated rear wing keeps the silhouette true to the RSR form. The TT-02 tub frame layout uses a central drive shaft to link front and rear drivetrains, and the front and rear cone differentials each use 4 bevel gears to distribute power across the axle. Toe adjustment at the front allows setup changes, while the battery compartment is designed to accept different battery types. Wheel width and diameter are 27/67 mm at the front and 32/67 mm at the rear, matching the slick tyre setup and the 251 mm wheelbase. The kit also contains a decal sheet, window masking film, an electronic speed controller and a 540 electric motor. Assembly and finishing shape the final look, with the unpainted body ready for the chosen livery and separate mirrors adding another exterior detail once fitted. On a smooth track or open paved space, the combination of adjustable gearing, independent suspension and all-wheel drive supports steady test runs, tuning sessions and repeat laps with the same chassis.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Front Fork Set CBR1000RR-R Fireb., model kit

€30.49

This 1:12 Front Fork Set CBR1000RR-R Fireb. is a Detail-Up model kit created to give a motorcycle build a more intricate front end. Gold color anodized aluminum outer tubes and reservoirs combine with gold color plated brass inner tubes to bring a crisp metal contrast to the fork area, while the yellow coil spring adds a visible accent within the assembly. The set is intended for 300014138 and focuses on the fork structure rather than broad body changes, making it a targeted upgrade for builders who want more definition in a key mechanical area. Plastic fork bottoms are included alongside mounting material, so the parts work together as a dedicated front fork assembly. The mix of aluminum, brass and molded components creates variation in finish and texture across the completed section. Assembly is required, and the stated assembly time is 600 minutes. On the workbench, the separate tubes, spring and small hardware support careful, step-by-step fitting and finishing. Once installed on the matching 1:12 motorcycle model, the fork assembly gives the front profile a more technical look that suits close-up display and detailed scale presentation.

Model motorcycle kits 1:12

1:12 Honda CBR 1000-RR-R Fireblade SP model kit

€52.99

This 1:12 Honda CBR 1000-RR-R Fireblade SP plastic model assembly kit turns Honda's circuit-focused superbike into a detailed display build with crisp bodywork, visible mechanical structure and race-inspired presence. At 176 mm long, 68 mm wide and 96 mm high, the finished motorcycle carries the low, aggressive stance of the full-size machine while fitting neatly into a shelf or cabinet display. The model recreates the bike's aerodynamic form with special attention to the side cowl area, where the internal winglets are rendered as part of the fairing design. A detailed liquid-cooled 4-cylinder engine sits at the center of the build, supported by the frame, front fork, swing arm and muffler layout highlighted in the kit design. The headlight is screw-attached, and the side and under cowl sections can be removed after assembly to change how the motorcycle is presented. Metal-plated parts are used for the mirror surfaces, adding a bright contrast against the painted bodywork and darker chassis areas. Textured semi-slick tires, tread patterns and 2 marking options give the finished motorcycle a purposeful road-and-track character. Masking stickers support cleaner paint separation on shaped surfaces, while the included racing stand lifts the completed bike into a paddock-style display setting. Cement and paints are required separately.

Model motorcycle kits 1:12

1:12 Honda Dax125 Tamiya Edition, model kit

€27.99

This 1:12 Honda Dax125 Tamiya Edition model kit captures the compact minibike stance of the full-size machine in a display scale that keeps the T-bone frame, long seat proportions and upright street-bike layout clearly visible. At 147 mm long, with a stated height of 67 mm and 103 mm in the source data, the finished build presents the Dax125 as a small-format motorcycle with distinct mechanical presence. The assembly breaks the bike into recognizable structures, with the engine, swing arm, front fork and muffler fixed to the frame by screws. Metal-plated parts are used for sections such as the muffler guard and side covers, giving those areas a separate finish from the surrounding components. A dedicated metal spring is supplied for the rear damper spring, and vinyl pipes reproduce accel wiring, the brake hose and the plug cord with finer line detail than rigid molded pieces. The kit also recreates the special helmet associated with the Tamiya Limited Edition styling. During the build, the molded blue, silver, black and clear parts help define the bike's layout before painting and detailing. Dedicated markings allow a choice between the normal version in pearl nebula red or pearl cadet gray and the Tamiya Limited Edition appearance. Paints and cement are required separately. On a shelf, desk or model display, the finished motorcycle brings together compact proportions, visible engine detail and road-bike character in a format suited to careful assembly and close-up viewing.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda Monkey 125, motorcycle model kit

€36.49

The 1:12 Honda Monkey 125 motorcycle model kit brings the compact look of Honda's modern minibike into a scale build with crisp proportions and a finished size of 142 mm x 63 mm x 86 mm. Its small footprint and rounded styling cues give the completed motorcycle a lively display presence, from the headlight and speedometer area to the short wheelbase silhouette that made the Monkey line widely recognized. This assembly kit recreates the 2018-era Monkey 125 with a detailed 124 cc engine appearance, chunky tires and bright plated exterior trim. The fenders and light cases use metal-plated parts to capture the gleam of the full-size machine, while clear parts handle lens details with sharper definition. Damper springs and vinyl tubing add mechanical depth to visible lines and suspension areas, and decals supply the markings that complete the finish. Engine, swing arm, front fork and rear fender sections are secured to the frame with screws, giving these structural areas a firm connection during assembly. On the bench, the varied materials and small mechanical details create a focused motorcycle build with painting and finishing work across body, engine and trim sections. Once completed, the model suits shelf display, diorama placement or close-up viewing where the Monkey 125's cheerful shape, chrome accents and thick tire profile stand out from every angle.

Model motorcycle kits 1:12

1:12 Honda NSR500 '84, plastic assembly kit

€67.99

This 1:12 plastic assembly kit captures the early Honda NSR500 '84 in the form that won the 1984 Italian GP, bringing one of Grand Prix racing's most unusual motorcycle layouts to the workbench. At 166 mm long and 52 mm wide, the finished machine has a compact display footprint while still leaving room for the distinctive bodywork, exposed mechanical areas and race-focused stance to read clearly. Honda developed the NSR500 around a more powerful V4 engine, and that engineering shift shapes the whole model. The kit reproduces the radical arrangement with expansion chambers mounted high and the fuel tank placed below the engine, creating the silhouette that set this machine apart in the 1984 season. The frame, swing arm and tank are rendered in aluminum tones, while the period racing livery combines white, blue and red body panels with a red front fender and black wheels. Small screws are used to attach fairings and the chamber cover, and the fuel tank is detachable. A metal spring is used in the rear suspension, and racing stand parts are included for display. During assembly, vinyl tubing is cut to measured lengths to represent fuel lines and wiring, adding another layer of mechanical realism around the engine and front section. The completed motorcycle suits shelf display, close-up inspection and careful finishing with paint and markings, especially for builders drawn to 1980s Grand Prix machines and technically distinctive race bikes.

Model motorcycle kits 1:12

1:12 Honda RC166 GP Racer 1960, motorcycle kit

€89.99

The 1:12 Honda RC166 GP Racer 1960 recreates a landmark Grand Prix motorcycle as a detailed assembly kit, centring the build on the distinctive air-cooled 6-cylinder engine and the long, lean proportions of a classic racing machine. Red and silver FRP cowling, large-diameter drum brakes and silver spoke wheels give the finished model the visual character associated with the original bike. Fine construction details carry the model beyond a simple outline. The wheel design uses super-thin 0.4 mm metal-plated ABS resin spokes, while solid rubber tires with a triangular tread pattern add texture at ground level. The engine area is shaped with crankcase and cylinder fin detail, and the full layout is supported by the 1:12 scale, which gives small mechanical parts room to read clearly once assembled. Assembly is required, and the stated build time is 600 minutes. Paints, cement and tools are required separately. On the bench, the kit suits a measured build pace with time for painting, detail work and careful alignment of the spoke wheels and body sections. Once completed, the Honda RC166 stands out in a display setting with its multi-pipe engine layout, racing fairing and compact 1960s GP silhouette.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Repsol Honda RC213V '14, motorcycle model kit

€57.99

The 1:12 Repsol Honda RC213V '14 captures the factory-works MotoGP machine from the 2014 season in a build focused on race-bike form, layered detail and authentic markings. Fairing lines, the merged front air intake duct and the compact tail section give the finished motorcycle the sharp stance of Honda's RC213V on the paddock stand. This assembly kit depicts a machine from the 1,000 cc MotoGP era, with the RC213V's aluminum double-tube frame and Honda 4-stroke V4 background reflected in the model's technical character. Separate parts shape smaller features with more definition, including the tail cowl-mounted camera, while the clear windshield section avoids cementing during that stage of the build. Parts to construct a racing stand are included, giving the completed motorcycle a display setup that matches pit-lane presentation. Assembly time is stated as 600 minutes. Paints and tools are required separately. During the build, masking stickers help with the multi-color finish, and the decal sheet brings the No.93 championship livery onto the fairing, tail and sponsor areas. Once completed, the model suits shelf display, motorsport collections and focused bench sessions centered on painting, decaling and final detailing.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Scania 770 S 6x4, RC assembly kit

€559.99

The 1:14 Scania 770 S 6x4 brings modern long-haul truck presence into an RC assembly kit with a tall cab, detailed exterior bars and a full tractor unit stance that stands out on the bench and in motion. At 532 mm long, 193 mm wide and 307 mm high, the model has the size to show off the proportions of the S Series shape, from the high-roof cab to the rear coupling area behind the cab. Inside the chassis, the drivetrain follows the real vehicle layout with the motor and transmission positioned at the front and drive sent to the double rear axles. The ladder frame combines aluminum side channels with resin cross members, while the suspension uses metal leaf springs and friction dampers for a truck-style mechanical setup. Interior parts such as the dashboard and seats are included, adding visible cab detail through the glazing. The gearbox uses a constant mesh 3-speed design with gear ratios of 1:32.49, 1:17.66 and 1:10.66, and LEDs can be attached separately to extend the lighting detail. A coupler at the rear allows linkage with separately available semi-trailers, so the tractor unit can be used in articulated truck layouts as well as on its own. Radio gear, a battery pack, a charger and paints are required separately. A separately available Multi-Function Control Unit MFC-03 adds light, sound and vibration functions for an even more involved driving setup.

RC trucks

1:14 Scania 770 S 8x4/4, RC assembly kit

€949.99

This 1:14 RC assembly kit recreates the Scania 770 S 8x4/4 as a large-scale tractor truck with a commanding road presence and detailed heavy-haulage character. At 610 mm long, 196 mm wide and 320 mm high, the model has the size to show off the cab contours, multi-axle layout and the metallic TS-38 Gun-Metal finish across the pre-painted body parts. The cab is formed by precise injection molding and backed up by detailed rear equipment areas, including the auxiliary machinery tower, fuel tank and air tank. Numerous metal parts in the chassis reinforce the technical look, while the front-mounted motor and transmission sit within the ladder frame layout used for this truck platform. Interior parts such as the dashboard and seats are included, and a 1:14 scale driver figure adds another layer of scale detail inside the cab. Stickers and metal transfers are also included to complete the exterior finish. The model suits builders who want both mechanical interest and display presence in one truck. A separately sold Multi-Function Control Unit can be installed to add light, sound and vibration operation, and radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Scania R620 6x4 Highline, RC kit

€494.99

The 1:14 Scania R620 6x4 Highline RC kit brings the presence of a modern road tractor into a large-format build, with a 520 mm body length, a high-roof cab and a painted blue finish that stands out on the bench and on the driving surface. This special edition uses pre-painted body components in TS-51 Racing Blue, finished with a urethane clear topcoat for an even, glossy exterior across the cab panels. Under the body, the ladder type frame gives the chassis the long, straight structure associated with full-size commercial trucks, while the 237+103 mm wheelbase sets the spacing for the 3-axle layout. The front and rear tread measure 156 mm and 138 mm, and the tyres use a 22 mm width with an 83 mm diameter at both ends, creating consistent rolling proportions across the truck. Drive comes from an Electric 540 motor paired with a 3-speed gearbox that uses 32.49:1, 17.76:1 and 10.66:1 ratios, so the running character can change between slower manoeuvres and more flowing sections. At 293 mm high and 187 mm wide, the cab and chassis fill out a display shelf with the same long-wheelbase stance they bring to indoor driving sessions. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Audi quattro, plastic model kit, 2-door coupe

€31.49

This 1:24 scale plastic model kit recreates the Audi quattro with the compact proportions and muscular lines that defined the original 2-door coupe. At 185 mm long, 79 mm wide and 57 mm high, the finished model has a substantial presence, while the flared fenders and spoilers give the body its unmistakable performance-focused shape. Beyond the outer shell, the kit brings key mechanical and cabin details into the build. The inline-5 turbo engine is depicted alongside the suspension and 4WD drive system, giving the model substance beneath the bodywork. Inside, the shaped interior includes seats, dashboard and shift lever, so the cockpit reads as a complete space rather than a simplified insert. Decals reproduce the stripe patterns on the seats, adding a period-correct finishing touch that stands out through the glazing. The tires are molded in synthetic rubber and carry tread patterns that suit the road-going character of the car. A driver figure is included for builders who want to add an extra human element to the finished scene. The instructions show 4 body color options for painting: silver, red, white and blue. Tools, cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Castrol Toyota Tom's Supra GT, model car kit

€26.99

This 1:24 scale model car kit recreates the Castrol Toyota Tom's Supra GT from the 1995 Japanese GT Car Championship with the low, wide silhouette and competition livery that made the race machine stand out on the grid. The static display format keeps attention on the car's aerodynamic bodywork, from the enlarged fenders to the prominent rear wing and the additional intake and outlet shaping worked into the shell. The kit is designed as an assembly build and includes the parts needed for the model itself. A detailed cockpit, accurately reproduced chassis undersurface and suspension components give the finished car substance beyond the outer body, so the model reads convincingly from above, through the windows and from lower viewing angles. Solid synthetic rubber slick tires reinforce the race-spec appearance, while the 1:24 scale suits shelf display alongside other sports car subjects in the same size class. Assembly time is stated as 600 minutes. Cement and paint are required separately. On a worktable, the body, chassis and interior sections invite a measured build with trimming, painting and decal placement. Once completed, the Castrol Toyota Tom's Supra GT brings 1990s Japanese GT racing character to a desk, display cabinet or collection focused on touring cars and competition machines.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Ford GT, plastic model kit, static display

€53.99

This 1:24 Ford GT plastic model kit turns the modern supercar's low, honed shape into a detailed static display build. The finished model measures 200 mm long, 94 mm wide and 46 mm high, giving the aerodynamic form enough size to show the buttresses, door-side air tunnels and tightly drawn roofline with real presence on a shelf or workbench. The body uses a rear section breakdown that follows the structure of the actual car, and separate shoulder sections plus a separate passenger-side dashboard add more definition during assembly. A multi-splitter rear diffuser and realistic tire tread pattern sharpen the view from low angles, while decals, metal transfers and masking stickers support the paint finish and exterior markings. Assembly time is stated as 600 minutes. Cement and paints are required separately. The rear hatch leaves the top of the 3.5-liter V6 on display, so the plated oil tank and engine detail remain part of the finished view instead of disappearing under the bodywork. On a desk, in a display cabinet or alongside other 1:24 sports car builds, the Ford GT combines modern race-bred surfacing with detailed underbody and engine features that reward close inspection from every angle.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Ford Mustang GT4, plastic model assembly kit

€48.99

This 1:24 Ford Mustang GT4 plastic model assembly kit brings the 2019 spec race car onto the workbench with a sharply defined body, compact 203 x 81 x 60 mm dimensions and the unmistakable long-hood, wide-track silhouette seen in GT4 competition. The form was developed with extensive study of the real car, which shows in the balance of the front spoiler, rear wing and diffuser across the finished display model. The body surface carries the vented engine hood treatment, and the kit adds metal-plated mirror surfaces for the side and rear view mirrors to sharpen small exterior accents. Two marking options are provided with decals for car no.17 in gun metal or car no.18 in white, and masking stickers are included to support crisp separation during finishing. The interior and underside give the build more depth than the outer shell alone, with race-cockpit fittings and mechanical detail that keep the model engaging during assembly as well as on display. Assembly is required, with a stated build time of 600 minutes. Paints and cement are required separately. On a shelf, desk or display case, the completed Mustang GT4 carries the visual tension of a modern circuit car, while the detailed surfaces, cockpit features and race markings invite a slower look from front splitter to rear wing.

Model car kits 1:24

1:24 Honda NSX, plastic model kit, assembly set

€32.49

The 1:24 Honda NSX brings the lines of a well-known sports car into a static plastic model kit that rewards careful, hands-on assembly. At 1:24 scale, the finished car has enough presence for display while still keeping the build compact enough for a worktable session. The set comes as an assembly kit and is listed as a non-powered car model, so the focus stays on shaping, fitting and finishing the vehicle rather than on drive functions or electronics. The stated assembly time of 600 minutes points to a build with room for steady progress across multiple sessions, whether the work starts with body preparation, continues through detail painting and ends with final display. Paints and tools shown in the reference material are not listed as included components. Minimum age in the data is 14 years. On a desk, in a display cabinet or alongside other 1:24 scale vehicles, the Honda NSX fits naturally into a collection built around road cars and modelmaking detail. The project also suits hobby sessions that break the work into stages, with each session moving the body, trim and finish closer to the completed car.

Model car kits 1:24

1:24 Honda S2000, plastic model kit, hard-top

€31.49

This 1:24 scale Honda S2000 plastic model kit captures the reborn front-engine, rear-wheel-drive roadster in a format that puts body shape, cabin detail and chassis structure at the centre of the build. The finished replica brings together the S2000's long nose, short deck proportions and wrapped headlight styling, creating a display model with the crisp stance of Honda's open 2 seater sports car. The body can be assembled in open form or with the hard-top installed, giving 2 distinct presentation options from the same kit. Inside the cabin, bucket seats, digital-style instruments and the red engine-start button recreate key details from the full-size car. The steering layout can be chosen as right-hand or left-hand drive, which adds a market-specific touch to the interior build. Underneath, the chassis undersurface and suspension are reproduced to extend the model beyond the body shell alone. Synthetic rubber tyres complete the road car look with a more realistic finish than hard moulded wheels alone. Assembly is required, with a stated build time of 600 minutes. Cement and paints are required separately. Once completed, the model suits shelf display, desk display or a place in a 1:24 sports car collection, where the white body, red cabin and bronze-style wheel finish shown on the reference build create a sharp contrast from every angle.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Mazda MX-5 RF, plastic model assembly kit

€41.99

This 1:24 plastic model assembly kit recreates the 2017 Mazda MX-5 RF with the sleek Retractable Fastback shape that sets the RF apart within the MX-5 line. At 164 mm long and 80 mm wide, the finished car carries the low stance, short overhangs and tight proportions of the original into a display scale that still leaves room for fine exterior and interior detail. The kit depicts top grade Japan-market equipment such as Recaro seats and BBS wheels, adding trim details that suit the RF's more refined hard-top character. New roof parts and rear and side window parts support 2 distinct display configurations, with the hard top raised or lowered to change the whole silhouette of the car. Metal-plated components are used for light reflectors and other small trim areas, giving bright accents where painted parts would be harder to define. Decals cover instrumentation and further details, while metal transfers finish emblems and side mirror surfaces with a sharper look than printed markings alone. Assembly takes about 600 minutes and suits a measured bench session with painting and detailing stages spaced across several sittings. Cement and paints are required separately. Once completed, the model sits naturally in a display case, on a shelf beside other 1:24 road cars, or as a focused single-car build that highlights Mazda's RF roof concept.

Model car kits 1:24

1:24 Mercedes-AMG GT3 #1, scale model kit

€64.99

This 1:24 scale model kit captures the 2016 Mercedes-AMG GT3 #1 as a static display build, translating the road-car-based GT3 racer into a detailed hobby project with the long bonnet, wide track stance and competition-focused body shape of the original. The finished model brings the visual drama of a customer sports car onto the workbench and into the display cabinet through sharply defined racing surfaces and a purposeful silhouette. The full-size Mercedes-AMG GT3 used a 6.3-liter naturally aspirated V8 with 558 hp, and this kit reflects that competition brief through bodywork shaped around airflow and track use rather than road trim. The carbon fiber body of the real car is represented here with carefully recreated exterior forms, including the prominent grille concept inspired by the classic 300 SL. Assembly is required, with a stated build time of 600 minutes. Cement and paints are required separately. The kit is supplied as an assembly kit for model building rather than as a prebuilt car. On the bench, the subject offers a focused build centered on race-car form, surface preparation and finishing work. Once completed, the Mercedes-AMG GT3 #1 suits shelf display, desk display or placement alongside other 1:24 sports car subjects, where the wing, grille treatment and competition aero parts give it a clear circuit-racing presence.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan 300ZX Turbo, plastic model kit

€26.99

The 1:24 Nissan 300ZX Turbo brings one of Nissan's late-1980s sports car shapes into a full display model format, with a low-slung coupe body, rear spoiler and the distinctive roof treatment visible in the finished build. At 1:24 scale, the model suits shelf display while still leaving room for painted trim, interior work and careful exterior finishing. This assembly kit is built as a non-powered car, so the focus stays on shape, proportion and surface detail rather than running gear. The source material behind the model is the Nissan 300ZX Turbo, known for its aerodynamic body and performance-led design, and that character comes through in the long bonnet, wide stance and clean side profile. Assembly is required, with a stated build time of 600 minutes. Paints and tools shown in the reference material are not part of the kit. The included component is the assembly kit itself. On the bench, the model lends itself to a steady build rhythm of part preparation, body painting and final detail work. Once completed, the finished car works well as a display piece in a collection of Japanese sports cars, 1:24 scale road cars or late-1980s automotive subjects.

Model car kits 1:24

1:24 Nissan GT-R Streetversion, model kit

€70.99

This 1:24 Nissan GT-R Streetversion model kit brings the shape of the 2007 road car into a static scale build with a finished size of 197 mm in length and 82 mm in width. The body proportions, low stance and detailed exterior surfaces give the completed model a strong shelf presence, while the opening hood adds a second display option that changes the whole character of the car. Beneath that hood, the kit focuses attention on the GT-R's twin-turbo V6 layout with a highly detailed engine area and separately molded induction box parts. Those separate components create clearer edges between adjoining sections during painting and finishing, which helps mechanical details read more distinctly once assembled. Metal-plated treatment on the wheels, muffler and induction box parts introduces a brighter finish on selected components, so the completed build gains contrast between body panels and hardware. Assembly is required, and the stated assembly time is 600 minutes. On a worktable, the kit suits a measured build pace with time for trimming, painting and detail work across the engine bay and exterior parts. Once completed, the model fits naturally into a display lineup of modern sports cars, where the opening hood and plated components give different angles of the Nissan GT-R Streetversion their own focal points.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche 911GT3 '99 Streetversion model kit

€35.99

This 1:24 scale model kit captures the Porsche 911GT3 '99 Streetversion with the low, purposeful stance and fixed rear wing that define the road-going GT3. The body shape stays true to the full-size car, while the finished build presents the coupe's clean lines, sporty rear treatment and 18-inch wheel style in compact display form. The kit focuses strongly on visible detail. A 2-seater cockpit interior is authentically recreated, including floor carpet and a GT3 emblem rendered as a metal transfer for a sharper finish than a printed marking alone. On the outside, plated parts are used for the wheels, headlight reflectors, door mirrors and muffler, creating distinct contrast across the body. The underside of the chassis is also richly detailed, so the model remains interesting when viewed from below rather than only from shelf height. Solid rubber Pirelli P-Zero replica tires complete the road-car character with realistic sidewall definition and tread presence. Assembly is required, with a stated build time of 600 minutes. The completed model suits display on a desk, in a cabinet or alongside other 1:24 sports car builds, and it also offers a focused painting and finishing project for builders who enjoy careful interior, wheel and body detailing.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche 934 Jagermeister, assembly kit

€52.99

This 1:24 assembly kit captures the Porsche Turbo RSR 934 in its Jagermeister racing livery, bringing the shape of the 1976 Group 4 GT car into a build that combines bold bodywork with competition detail. Wide fenders, a large rear wing and the low silhouette give the finished model the unmistakable presence of a classic turbocharged race car. The full-size Porsche Turbo RSR 934 was derived from the Porsche 911 Turbo and used a rear-mounted 2,994 cc turbocharged flat-6 engine with 260 hp. That racing background gives the model a strong historical anchor, and the kit reflects it through carefully rendered exterior lines and mechanical areas. The cockpit shows a bucket seat, steering wheel, dashboard instruments and a visible roll cage through the windows. Around the body, the front intake, hood vents, mirrors, number panels and sponsor markings build up the period competition look with crisp visual contrast. Assembly time is stated as 600 minutes, making this a substantial bench project rather than a quick snap build. The scope of delivery includes the kit, instructions and decor. Paints, tools and cement are required separately. Once completed, the model suits shelf display, close-up viewing of the underside and interior, or a place alongside other classic motorsport subjects in 1:24 scale.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche 934 Vaillant Kremer Racing, model car

€46.99

This 1:24 scale model car captures the Porsche 934 in Vaillant Kremer Racing trim with a format that suits both hands-on assembly and finished display. The combination of the low competition silhouette and the period team livery gives the build a strong motorsport presence from the first fitted body section to the completed racer. The subject centers on the Porsche 934, a competition machine whose widened bodywork, pronounced arches and racing proportions define the look of the finished model. In this version, the Vaillant Kremer Racing decoration shapes the visual identity, bringing the car's track-era character into clear focus. As a non-powered car, the model concentrates attention on exterior form, painted surfaces and the placement of the racing graphics. That makes it well suited to builders who enjoy careful body preparation, crisp finishing work and the satisfaction of seeing a historic race car take shape at 1:24 scale. On a shelf, in a display cabinet or alongside other motorsport subjects, the completed car brings a distinct racing profile and team-specific appearance. The compact scale also makes it easy to place within a broader collection while still leaving room for the Porsche 934 lines and Vaillant Kremer Racing colors to read clearly.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Subaru BRZ, scale model kit, steerable wheels

€56.99

This 1:24 Subaru BRZ scale model kit recreates the compact rear-wheel-drive sports coupe with crisp body lines, a low-slung stance and a finished size of 177 mm long by 84 mm wide. The assembly format turns the car's proportions and mechanical layout into a hands-on build, with the boxer-style Flat-4 engine and cabin details giving the model substance beyond the exterior shape. The full-size BRZ released in March 2012, and this kit reflects that modern coupe character with realistic detail across the engine bay, suspension and interior. Steerable front wheels make it possible to set the finished model at different display angles, which changes the look of the nose, wheel position and side profile without altering the bodywork. Parts for an optional rear spoiler add a second visual configuration to the tail section. Metal transfers are provided for mirror surfaces and manufacturer emblems, adding a sharper finish than molded detail alone. Window masking stickers support clean paint separation around the glazing. Paints, cement and tools are required separately. On a shelf, desk or in a display cabinet, the Subaru BRZ reads clearly as a modern front-engine sports coupe, with the underbody, cockpit and engine areas rewarding a closer look. The compact 1:24 format also suits focused bench sessions where body finishing, detail painting and final presentation matter as much as the completed car itself.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Subaru Impreza WRC 2001, plastic model kit

€34.49

The 1:24 Subaru Impreza WRC 2001 plastic model kit brings a World Rally Championship sedan into a compact display scale with bodywork shaped around the car's distinctive 2001 appearance. Small compound headlights, blister-style fenders, the extreme rear spoiler and the 4-door sedan form give the finished model a clear Monte Carlo Rally-era character. At 183.5 mm long and 75 mm wide, the completed car has enough presence for shelf display while still leaving room to focus on paint, markings and trim work. The shell is supported by interior detail that recreates the roll-cage and cockpit, so the build carries competition character beyond the outer body panels. Transparent red parts for the brake lights and clear orange parts for the turn signals separate these lighting elements from the painted body and sharpen the final finish. A mesh piece for the air inlet grill adds another material contrast during assembly, while the pre-painted gold wheels establish one of the defining visual cues of this Subaru rally machine. Markings are included for 3 drivers: Richard Burns, Petter Solberg and Markko Martin. Assembly is required, with a stated assembly time of 600 minutes. On the bench, the kit suits careful trimming, painting and decal placement; once completed, the 1:24 scale format and competition detailing make it a strong choice for motorsport displays centered on rally cars and early 2000s race subjects.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota Celica LB Turbo Gr.5, model kit

€30.99

This 1:24 scale plastic model assembly kit recreates the Toyota Celica LB Turbo Gr.5 with the stretched proportions and aerodynamic add-ons that made the racing car so distinctive. Wide fenders and a large rear wing shape the silhouette, while the finished dimensions of 192 mm x 87 mm x 52 mm give the model a strong shelf presence. The build focuses on visible race-car structure as much as outer form. Inside, the cockpit is rendered with a roll cage, and the underside carries separate chassis detail that stays interesting even after assembly. Suspension features are also reproduced, giving the model more to study than the body alone. Mesh wheels and solid synthetic rubber slick tires complete the competition look with the right contrast between spoke pattern and tire surface. Cartograf decals provide crisp markings, and the set also contains 1 driver figure plus 2 car numbers for a more defined finishing scheme. On the worktable, the kit suits careful painting, decal placement and detail picking across body, cabin and underside. Once completed, the Celica works equally well as a display model that rewards close viewing from the front, side and low rear angle. Paints and glue are required separately, and a manual is included.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota G.R. TS050 HYBRID, plastic model kit

€58.99

The 1:24 Toyota G.R. TS050 HYBRID brings the 2018 endurance racer to the workbench as a plastic model kit with the low, sculpted form of the original car. At 194 mm long, 79 mm wide and 44 mm high, the finished model gives the TS050 HYBRID a compact display footprint while preserving the long front overhangs, enclosed cockpit and tightly packaged rear bodywork that define this prototype. The body reflects the 2018 specification with reworked aerodynamic parts inside and out, plus the longer front fenders and diffuser changes used on that version of the car. The interior is not left empty: the cockpit area shows the driver seat and the lithium-ion battery, so the hybrid race car layout remains visible beyond the outer shell. A metal-plated part recreates the silver roof section, and separate metal transfers are supplied for the side mirrors and headlight sections to give those small surfaces a cleaner finish than paint alone. Assembly is required, with a stated build time of 600 minutes. On the bench, the combination of body shaping, plated trim and race markings supports a focused paint and finishing session with clear visual progress at each stage. Cement and paints are required separately, and the included decals for the number 7 and 8 cars allow the completed model to be finished in either of the two 2018 race configurations.

Model car kits 1:24

1:24 Toyota GT-One TS-020 LeMans '99 model kit

€38.99

This 1:24 plastic assembly model kit recreates the Toyota GT-One TS-020 from LeMans '99 with the long, low body shape that defined Toyota's endurance racer. At 202 mm long and 84 mm wide, the finished model gives the car's stretched cockpit, deep front overhang and broad rear deck enough room to read clearly on a shelf or in a display case. The body focuses on the GT-One's aerodynamic development, with the nose and diffuser reproduced as distinct forms rather than simplified surfaces. A removable rear cowl reveals the detailed V8 twin turbo engine after completion, adding a second viewing angle that suits static display. The kit is based on the 1999 race car and includes markings for car no. 1 and 3, allowing the finished build to follow two entries from that Le Mans field. Masking seals are also included to support cleaner paint separation on the complex body curves and canopy area. Assembly time is stated as 600 minutes. On the workbench, the model suits a measured build with painting, decaling and final display all playing a clear role in the result. Once completed, the low-slung silhouette, exposed engine view and endurance-racing livery give the car a strong presence whether shown from the nose, the rear deck or with the cowl removed.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M151A2 Ford MUTT, plastic model kit

€13.49

This 1:35 plastic model kit captures the US M151A2 Ford MUTT in a TOW missile carrier configuration, pairing the compact military vehicle with the M220 tracking system for a display subject with clear mechanical presence. The open body, raised launcher layout and field equipment details give the finished build a purposeful silhouette that stands out in a military collection. The kit contains parts for 1 vehicle and supports more than one configuration drawn from service use. Army Version and Marine Corps Version builds are provided, with the Marine Corps type using different front-end and pipework details. A tripod is also included, allowing the TOW system to be presented in a dismounted setup beside the vehicle. Missile markings such as FOR TRAINING USE ONLY add another layer of finishing accuracy, while the painting guide covers multiple military schemes and unit markings. With an assembly time listed at 600 minutes, this subject suits model builders who enjoy a longer bench session shaped by fitting, painting and final display choices. Cement and paints are required separately. The completed scene can be arranged as a mobile launcher, a parked support vehicle, or a field position with the TOW system deployed off the MUTT.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 WWII Citroen CV11 Staff Car model kit

€18.99

The 1:48 WWII Citroen CV11 Staff Car model kit brings a well-known French sedan into historic scale scenes with a shape that stands apart from typical military vehicles. Its elegant Traction Avant body, reproduced at 1:48 scale and measuring 91.5 mm in overall length, gives dioramas, airfield layouts and static displays a civilian-based car that was also seen in wartime service. The full-size Citroen 11CV was produced from 1934 to 1957 and became known for front-wheel drive, an advanced layout for its era. That background gives the subject a distinct place in automotive history as well as military modelling. The kit is designed as a static display model and focuses on exterior form, interior presence and chassis detail rather than motorised functions. The underside structure is rendered with attention to the original layout, which adds realism when the model is viewed from a low angle or placed in a maintenance or roadside scene. Decals support multiple finishing directions by depicting French and German military versions. On a shelf, the car sits comfortably as a standalone historic vehicle with rounded fenders, tall grille lines and a recognisable pre-war silhouette. In a 1:48 scene, it can be positioned beside tanks, support equipment or aircraft to suggest staff movement, airfield transport or occupied-city street settings. Cement, tools and paints are required separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:6

1:6 Honda Monkey 40th Anniversary, model kit

€79.99

The 1:6 Honda Monkey 40th Anniversary model kit brings the compact proportions and retro styling of Honda's minibike into a large display scale with crisp visual detail. The black fuel tank with Honda marking, black frame, round headlight, 2 round rear-view mirrors and orange turn signals combine into a road-bike layout that reads clearly from every angle. The anniversary finish adds several standout touches beyond the basic silhouette. Red wheel rims and red rear suspension springs create a sharp contrast against the darker body sections, while the black seat with its red check pattern gives the build a distinctive period look. Chrome-finished sections on the handlebars, engine area and rear luggage rack add reflective highlights that break up the frame and bodywork. The side stand supports the completed motorcycle in a natural parked position, making the finished build easy to place in a cabinet, on a shelf or on a desk. During painting and finishing, the visible tank logo and side cover 40 marking help define the celebratory edition theme. The large 1:6 scale leaves room for careful work on the lighting, mirrors and engine surfaces, turning the motorcycle into a focused modelling project with strong display presence after assembly.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 1978 Ford Zakspeed Capri Turbo, RC assembly kit

€174.99

The 1:10 1978 Ford Zakspeed Capri Turbo RC assembly kit brings one of the standout DRM racing cars of the late 1970s onto the TT-02 chassis, pairing a low, wide touring car stance with shaft-driven 4WD. At 488 mm long, 205 mm wide and 124 mm high, the model carries the dramatic proportions of the original car into a build that suits detailed bench work and fast on-road sessions alike. The bodyshell is formed in 1.0 mm polycarbonate and arrives unpainted, leaving the paint finish and final race look open to the builder. ABS add-on parts supply the side mirrors and rear wing, and the kit also comes with stickers plus masking stickers for the paint job. A Type 540 Torque-Tuned motor and an electronic speed controller are included, so the drive package is already matched to the TT-02 platform. The standard 251 mm wheelbase sets the chassis geometry, while the enclosed drivetrain keeps the central layout tidy during assembly and maintenance. On the road, the front 26 mm slick tyres and wider 30 mm rear slick tyres give the model the visual balance of the 1978 racer, and the independent suspension at both ends supports smooth response through bends. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 1991 Audi V8 Touring, RC model kit, TT-02

€154.99

The 1:10 1991 Audi V8 Touring brings a landmark DTM racing car into RC form with the TT-02 platform underneath and a clear polycarbonate bodyshell above. Its wide sedan proportions, rear wing, side mirrors and No.45 Frank Biela markings give the finished build the stance of the 1991 championship car whether it is lining up on asphalt or resting between runs. The assembly kit pairs a shaft-driven 4WD layout with a Type 540 Torque-Tuned motor and an electronic speed controller, creating a direct, planted driving character on on-road surfaces. Two-piece mesh wheels carry racing slick tyres, matching the touring car look while supporting smooth rolling grip on paved ground. The TT-02 layout uses identical left and right suspension arms and uprights, which simplifies parts identification during the build. A 257 mm wheelbase is specified for the bodyshell, and ABS side mirrors add another scale detail to the finished car. Radio gear, a battery pack, a charger and paints are required separately. On a workbench, the clear body invites careful trimming, painting and decal placement to recreate the 1991 race livery with crisp panel lines and sponsor graphics. Once assembled, the chassis suits car park sessions, club practice laps and shelf display alike, with the historic Audi shape giving the model a strong presence even when standing still.

On-road RC cars (2WD/4WD)

1:10 Audi 90 quattro Racing, RC assembly kit

€169.99

The 1:10 Audi 90 quattro Racing RC assembly kit brings late-1980s touring race style to the TT-02 platform, with a 446 mm long polycarbonate bodyshell, a 192 mm width and a 127 mm height that give the car its broad, low competition look. Separate red ABS parts shape the mirrors, rear wing and air ducts, so the finished shell carries more depth than a one-piece body alone. A 251 mm wheelbase places the body on the short TT-02 layout, while the shaft-driven 4WD design keeps the drivetrain direct and neatly packaged through the chassis. The kit also includes a Type 540 Torque-Tuned motor and ESC, giving the running gear a matched starting point for paved-surface driving. Newly designed white dish wheels use a +4 mm offset, and the included urethane bumper helps protect the bodyshell during running and body mounting. Radio gear, a battery pack, a charger and paints are required separately. On a smooth car park, club track or other paved layout, the slick-tire setup and 4WD chassis suit clean, fast laps and precise line changes. During the build, the separate aero details, wheel design and racing proportions give the shell a focused finish that stands out on the stand as clearly as it does in motion.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi R8 LMS 2008, RC model car, TT-02

€185.99

The 1:10 RC Audi R8 LMS 2008 pairs a modern GT racing silhouette with the TT-02 platform, creating a model car that carries both visual presence and a clear mechanical layout. The polycarbonate body captures the low nose, stretched cabin and broad fenders of the full-size racer, giving the finished car a track-bred look whether it is parked on a shelf or moving through a smooth corner. As an RC assembly kit, this version leaves the build itself as part of the appeal. The TT-02 chassis is known for its shaft-driven 4WD design and straightforward structure, which makes the placement of major components easy to follow during construction and later maintenance. The separate body format also opens space for a custom painted finish that can lean toward period race styling or a cleaner single-colour scheme. Radio gear, a battery pack, a charger and paints are required separately. On the floor or on tarmac, the low GT shape and 1:10 format create a convincing racing impression with each pass. The combination of scale detail, chassis engineering and hands-on assembly suits hobby sessions that continue beyond the first build into setup changes, body finishing and repeat driving runs.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi V8 1992 Touring, RC assembly kit, TT-02

€159.99

The 1:10 Audi V8 1992 Touring RC assembly kit brings classic touring-car presence to the TT-02 platform, pairing a 463 mm long body with a 257 mm wheelbase for a planted on-road layout. Its clear polycarbonate bodyshell recreates the imposing lines of the 1992 race car, and separate side mirror parts add another layer of scale detail once fitted. The body measures 188 mm in width and 138 mm in height, giving the finished model the broad, low proportions associated with this era of circuit racing. Included stickers reproduce the 1992 Audi V8 Touring markings, while masking stickers help guide the paint work on the clear shell. The TT-02 chassis uses a shaft-driven 4WD configuration, and its symmetrical layout keeps major components arranged for balanced weight distribution. Coil-spring damped double wishbone suspension at the front and rear works with 4-bevel differential gears to support smooth cornering and composed running on tarmac. On a home workbench, the kit offers a focused build centred on chassis assembly, body finishing and wheel fitment. Once completed, the silver mesh-style wheels, slick tyres and detailed sedan silhouette give the model a strong track-day look during on-road driving. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:10 Blitzer Beetle, RC buggy, 2WD assembly kit

€209.99

The 1:10 Blitzer Beetle brings classic Beetle styling into an RC buggy format with a 2WD layout and a body shell shaped around the familiar rounded roofline, front fenders and compact rear. Bright orange body sections, a black rear and roof area, and large flame graphics give the model a bold custom-race look that stands out clearly once the buggy is on the move over dirt or gravel. Visible front suspension springs, a front bumper, side mirrors and window detailing add extra scale character beyond the main shell shape. The oversized knobby tyres suit the off-road buggy format, giving the model the visual stance associated with rough-surface running and vintage sand-race inspired machines. As an assembly kit, this version leaves the build as part of the hobby, with the chassis and body coming together before the first outing. Batteries are not included. The finished buggy suits track sessions, packed-dirt running areas and display between drives, where the Beetle silhouette and vivid livery remain a strong part of its appeal. It also fits hobby collections that focus on classic body styles, 1:10 RC machines or Tamiya buggy designs with a distinct retro character.

On-road RC cars (2WD/4WD)

1:10 Citroen DS, RC assembly kit, MB-01 chassis

This 1:10 RC assembly kit recreates the Citroen DS with the long, flowing lines that made the original 1955 car instantly recognizable. The lightweight polycarbonate body captures the early-period version with 2 rounded headlights, while the long-wheelbase MB-01 L layout gives the model a 239 mm wheelbase within overall dimensions of 419 x 198 x 137 mm for a planted on-road stance. The compact MB-01 chassis is built as a 2WD platform and uses a center frame that keeps the battery pack, motor and R/C equipment in place while drivetrain configuration changes are made. By changing the attachment directions of the final gears and steering linkage, the chassis can be set up for front-wheel drive or rear-wheel drive. For rear-wheel drive cars, a low or high motor position can be selected. The chassis also uses 4-wheel double wishbone suspension with friction dampers, and the motor mount, final gears and suspension are arranged in unitized sections for straightforward maintenance work. A 540 motor and electronic speed controller are included. On smooth on-road surfaces, the 60 mm front and rear tires suit the DS body shape and wheelbase with a composed, scale look. Radio gear, a battery pack and a charger are required separately, and the export body is supplied clear rather than pre-painted, leaving the finish open to a custom build.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Citroen DS, RC assembly kit, MB-01 chassis

€174.99

This 1:10 RC assembly kit recreates the Citroen DS with the long, flowing proportions that made the original car stand out, pairing a pre-painted blue polycarbonate body with smoke-tinted windows and the early-style front end with 2 rounded headlights. At 419 mm long, 198 mm wide and 137 mm high, the model carries the DS shape with a clear road-car presence on the chassis. Under the body, the MB-01 platform uses a compact 2WD design built around a center frame. The layout allows 3 wheelbase options, and the drive system can be changed between front-wheel drive and rear-wheel drive by altering the attachment directions of the final gears and steering linkage. For rear-wheel drive cars, a low or high motor position can be selected. The chassis also uses 60 mm front and rear tires, with 60D tires specified for tire changes. An electronic speed controller and 540 motor are included. The 4-wheel double wishbone suspension uses friction dampers and a symmetrical structure, giving the running gear a tidy, technical layout during assembly and maintenance. Unitized sections for the motor mount, final gears and suspension help keep service work organized. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Fiat 131 Abarth Olio Fiat, RC assembly kit

€184.99

This 1:10 RC assembly kit captures the Fiat 131 Abarth Rally Olio Fiat in a compact rally format built around the MF-01X chassis. The polycarbonate body measures 400 mm long, 180 mm wide and 132 mm high, and the 239 mm L-size wheelbase gives the shell the proportions of the original competition car as it sits over the chassis. The body uses separately molded components for the side mirrors and rear wing, which helps preserve the distinct shape of these details instead of flattening them into the shell. Polycarbonate light cases are designed for separately sold 5 mm LEDs, opening the door to a more complete front and rear light setup. The kit also includes stickers for body details and logos, allowing the Olio Fiat livery to be built up across the shell with the correct visual character. A Type 540 Torque-Tuned motor and ESC are included. Radio gear, a battery pack, a charger and paints are required separately. On the ground, the MF-01X layout combines shaft-driven 4WD with 4-wheel double wishbone suspension, a combination suited to paved running and flat dirt stages. The 239 mm wheelbase and higher rally-style stance give the chassis the look and clearance associated with classic rally machines. It suits bench sessions focused on body finishing just as well as outdoor runs where the suspension can work over loose, dusty surfaces.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Ford Escort Custom, RC assembly kit, TT-02

€154.99

The 1:10 Ford Escort Custom brings classic 1998 touring car style to the TT-02 platform in an RC assembly kit with a 425 mm length, 189 mm width, 145 mm height and 257 mm wheelbase. Its low roofline, wide body shape and race-inspired proportions give the finished model a strong track presence whether it is being built on the bench or lined up for a run. The bodyshell is formed in 1.0 mm polycarbonate and comes with separate parts for the side mirrors and rear wing, so the exterior gains extra depth beyond a one-piece shell. White ABS dish wheels pair with treaded tires for the period-correct look shown by the Escort Custom body. Stickers and masking stickers are included for the paint job, supporting cleaner window lines and sharper placement of the livery details. The kit is based on the TT-02 chassis, a shaft-driven 4WD design with a bathtub frame layout that keeps the main components arranged in a straightforward format. Radio gear, a battery pack, a charger and paints are required separately. On a shelf, the Ford Escort Custom body, wing and mirror parts create a focused motorsport silhouette with clear 1:10 scale character. During running sessions, the 4WD TT-02 layout and independent suspension support controlled handling while the detailed shell keeps the model visually tied to the full-size car.

On-road RC cars (2WD/4WD)

1:10 Ford Focus RS Custom, RC assembly kit, TT-02

€154.99

This 1:10 RC assembly kit recreates the Ford Focus RS Custom on the TT-02 platform, pairing a compact 427 mm length with shaft-driven 4WD for a layout built around controlled on-road running. The pre-painted 1.0 mm polycarbonate bodyshell gives the model its white custom finish straight away, while the 185 mm width and 145 mm height keep the proportions close to the full-size car's assertive stance. Separate parts depict the side mirrors and rear wing, adding sharper body definition than a single-piece shell alone. The 257 mm wheelbase works with the TT-02 layout to place the main components in a balanced arrangement across the chassis. Stickers and masking stickers are included for the finishing work, and the body arrives with pre-cut wheel arches and pre-made body mount holes. Smoke-tinted windows add contrast to the white shell, and the custom street version is presented without sponsor logos for a cleaner look. On a workbench, the kit offers a focused build centered on fitting the bodyshell, chassis parts and running hardware into a complete 4WD touring car. Once assembled, the combination of racing radial tires, 16-spoke wheels and the Focus body shape gives the model a crisp on-road presence suited to driving sessions and shelf display alike. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Ford GT Mk.II 2020, RC assembly kit, TT-02

€159.99

This 1:10 RC assembly kit recreates the Ford GT Mk.II 2020 as a low, track-focused machine with a 479 mm length, 188 mm width and 112 mm height. The 257 mm wheelbase gives the model the stretched proportions of the full-size car, while the lightweight polycarbonate shell brings the body lines into a form suited to painting, trimming and final detailing. Separate parts are used for the flying buttresses, rear wing and side mirrors, so the finished car carries more depth than a one-piece shell alone. Twin 5-spoke wheels match the race-bred look, and the included markings add the visual finish shown by the GT Mk.II design. The TT-02 platform is built around a shaft-driven 4WD layout, and its 4-wheel independent double wishbone suspension uses matching arm and upright parts side to side. That shared parts layout keeps maintenance more straightforward when the chassis is opened for adjustment or replacement work. On the bench, the body invites a careful paint process with masking for windows and light areas before the graphics go on. Once assembled, the long wheelbase, low roofline and prominent aero parts give the model a planted circuit stance that stands out in running sessions as clearly as it does at rest. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Ford Mustang GT4, RC assembly kit, TT-02

€154.99

The 1:10 Ford Mustang GT4 RC assembly kit brings GT4 race car presence to the TT-02 platform with a sharply formed polycarbonate body, a 459 mm overall length and styling based on the full-size car's CAD data. Front and rear light cases are also molded in polycarbonate, giving the shell extra depth around the lamps once the body is finished and mounted. The TT-02 chassis places this model in Tamiya's shaft-driven 4WD touring car range, with a layout designed to keep upkeep straightforward while leaving room to explore the broad TT-02 option parts line. Stickers are included to create the original livery, and masking stickers support the paint process on windows and detail areas. The shell also uses separately molded parts for the rear wing and side mirrors, which helps preserve the distinct GT4 silhouette. A 257 mm wheelbase is specified for the body, and the shell is prepared with pre-cut wheel arches to reduce trimming during assembly. On a smooth indoor surface or a paved outdoor run, the low racing body, slick tires and touring car chassis combine into a focused on-road driving setup with a clear motorsport look. Radio gear, a battery pack, a charger and paints are required separately.

RC buggys (2WD/4WD)

1:10 Holiday Buggy 2010, RC assembly kit, 2WD

€144.99

The 1:10 Holiday Buggy 2010 RC assembly kit brings back a classic Tamiya buggy from the 1970s with the familiar body shape mounted on the DT-02 chassis. That combination pairs retro styling with a current hobby platform, creating a buggy that looks at home on dirt, gravel and uneven ground while keeping the mechanical layout easy to follow during the build. The DT-02 uses a bathtub frame with the battery pack loaded in the center, a chassis arrangement that helps distribute weight evenly through direction changes and rough sections. At the rear, the motor drives a 2WD transmission that keeps the drivetrain layout straightforward and accessible. Double wishbone suspension at all 4 wheels manages wheel travel through bumps, while the buggy format gives the model the ground-ready stance associated with classic off-road RC cars. The re-release format also preserves the identity of the original Holiday Buggy while placing it on a chassis designed for dependable running. On a compact track, a gravel path or a rough open patch, the chassis layout supports smooth steering corrections and stable corner entry as the surface changes. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Honda NSX 1998 Racing, RC assembly kit

€159.99

This 1:10 RC assembly kit brings the 1998 Honda NSX Racing onto the TT-02 platform in a form that combines scale presence with focused on-road running. At 435 mm long, 194 mm wide and 121 mm high, with a 257 mm wheelbase, the finished car carries the low, stretched proportions of the race machine across tarmac and smooth indoor surfaces. The bodyshell uses 1.0 mm polycarbonate, a material chosen for low weight and crisp shaping around the NSX lines. Gun metal 6-spoke wheels are paired with racing slick tires, giving the model the visual character of a circuit car and the contact patch suited to paved running. The TT-02 chassis uses a shaft-driven 4WD layout, a format that distributes drive front and rear through a central shaft for stable acceleration and composed handling. A Type 540 Torque-Tuned motor and ESC are included as part of the running package. Stickers and masking stickers support the paint process with defined window lines and race graphics. On a smooth car park, club floor or home workshop bench, the model suits builders who want both body finishing and driving in one project. Radio gear, a battery pack, a charger and paints are required separately, allowing the final setup and colour scheme to be chosen to match the intended running style.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Honda NSX Racing, RC assembly kit, TT-02

€174.99

This 1:10 RC assembly kit brings the 1998 Honda NSX Racing into a compact on-road format with a 435 mm long body, a 257 mm wheelbase and the low, wide proportions that define the full-size race car. The pre-painted polycarbonate bodyshell arrives in PS-1 White with PS-31 Smoke windows, so the main color layout is already in place before the final exterior details are added. The bodyshell uses 1.0 mm polycarbonate and is shaped to capture the lines of the 1998 Honda NSX Racing, from the low nose to the extended rear wing profile. The TT-02 chassis uses a shaft-driven 4WD layout, a format known for its straightforward drivetrain path and composed handling on paved surfaces. An ESC and Type 540 Torque-Tuned motor are included, giving the chassis its electric drive package straight from the kit. Gun metal 6-spoke wheels and racing slick tires match the car's circuit-focused character, while stickers and masking stickers help complete the livery and window detailing. On a smooth floor or paved running area, the long wheelbase and 4WD layout support clean tracking through bends and steady power delivery out of corners. The pre-painted body also suits builders who want to focus more time on assembly, decal placement and final setup than on the first paint stage. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Hornet EVO, RC assembly kit, 2WD buggy

€209.99

Hornet EVO brings the classic Hornet buggy shape back in a 1:10 RC assembly kit that ties anniversary styling to hobby-grade mechanical detail. The 0.7 mm polycarbonate body keeps the familiar silhouette from Item 58336, while the updated sticker design refreshes the black, yellow and orange racing look across the nose, sides and rear wing. Under the shell, the 2WD chassis uses the bathtub frame layout from Item 58336 and combines it with a Type 540 motor and an included ESC for electric rear-wheel drive. The suspension differs from Item 58336 with 4-wheel independent double wishbone suspension, CVA oil dampers, a revised rear gearbox and full ball bearings. Front ribbed tires and rear high-grip spike tires split steering and traction duties, giving each axle a distinct role on dirt and other loose surfaces. The clear body shell also leaves room for a custom painted finish that follows the supplied markings. On a compact off-road course, the exposed suspension, rear motor layout and large rear tires create the classic stance of a racing buggy as it accelerates out of turns and tracks across uneven ground. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Hotshot II (2024), RC assembly kit, 4WD

€229.99

The 1:10 Hotshot II (2024) is an RC assembly kit that brings back a classic 4WD buggy with a compact 390 mm length, 235 mm width and 160 mm height. Its shaft-driven layout sends power to all 4 wheels for confident running on loose ground, while the black body with orange line graphics and a large rear wing gives the model the sharp stance of a period off-road racer. The lightweight body and wing are formed in 0.7 mm polycarbonate, and the shell comes pre-cut and pre-painted in black, leaving the final livery to the updated sticker set. Underneath, the ABS monocoque frame and suspension arms use reinforced resin sections. The front and rear suspension work through a 4-wheel independent double wishbone layout, with CVA oil dampers II and a front stabilizer managing chassis movement as the buggy changes direction or crosses uneven terrain. Semi-pneumatic hybrid tires combine oval block and pin spike tread, and they are mounted on large-diameter one-piece nylon wheels. A Type 540 motor and ESC are included. Radio gear, a battery pack, a charger and paints are required separately. On a dirt track, packed gravel or a backyard course, the Hotshot II (2024) suits builders who want both assembly detail and active driving. The re-released 1987 design also gives the finished buggy strong shelf presence between running sessions.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Lancia 037 Rally, RC assembly kit, TA02-S

€234.99

The 1:10 Lancia 037 Rally RC assembly kit brings a classic Group B silhouette to the TA02-S platform, pairing the short-wheelbase chassis with a body shape known from the 1983 works rally car. At 422 mm long, 186 mm wide and 132 mm high, the model carries the compact stance, wide arches and rear wing that define the 037 on the stage. The body is injection molded and fitted with newly produced front bumper and sticker sheet parts created for this release. Metal-plated light cases frame the headlights, taillights and fog lamps, while separate side mirrors and windshield wipers add extra surface detail beyond the main shell. Inside, the cockpit insert depicts both driver and co-driver alongside the dashboard, giving the cabin a more complete rally layout when viewed through the glazing. The TA02-S chassis uses a bathtub frame and is compatible with standard Type 540 motors. An electronic forward and reverse speed controller is included. Radio gear, a battery pack, a charger and paints are required separately. On a paved course, the shaft-driven 4WD system and short wheelbase combine into a lively rally-style driving character, while the double-wishbone suspension and oil dampers help the chassis work through repeated corner entries. The detailed shell, competition markings and cockpit scene also give the finished car strong presence between running sessions.

On-road RC cars (2WD/4WD)

1:10 Lancia Delta HF Integrale, RC assembly kit

€169.99

The 1:10 Lancia Delta HF Integrale RC assembly kit pairs classic rally car shape with the TT-02 chassis, a shaft-driven 4WD platform built around a tub frame layout. At 407 mm long, 186 mm wide and 159 mm high, the model carries the compact, upright proportions of the original car while the 257 mm wheelbase sets the stance on the chassis. The unpainted polycarbonate body arrives with separate mirrors and a rear spoiler, ready for finishing work that brings out the car's period rally character. Under the shell, the TT-02 layout combines a central driveshaft with front and rear cone differentials using 4 bevel gears. The front end is toe adjustable, and the motor mount also accepts type 380 motors in addition to the included type 540 motor with air cooling. A battery compartment designed for different battery types broadens setup choice, while the included electronic speed controller completes the core drive package. Rally block tread tyres and white wheels match the car's competition look and suit loose-surface style running. The kit format gives the build real substance, from body preparation to chassis assembly and final setup. Decals and window masking film are included for the finishing stage, supporting accurate placement of markings and clean window lines. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 McLaren Senna, RC assembly kit, TT-02

€159.99

This 1:10 RC assembly kit brings the McLaren Senna into an on-road format with a low polycarbonate body, black ABS side mirrors and a separate rear wing that sharpen the supercar silhouette. At 466 mm long, 194.6 mm wide and 118 mm high, the model has a broad, flat stance, while the 257 mm wheelbase gives the proportions a stretched, purposeful look. The TT-02 chassis uses a shaft-driven 4WD layout, a format known for straightforward construction and broad setup flexibility across different running preferences. A Urethane Bumper L sits at the front to take the edge off minor contact during use and handling. The body shell requires painting, cutting out, attachment of parts and sticker application, so the finished car carries the builder's own finish rather than a pre-decorated shell. Radio gear, a battery pack, a charger and paints are required separately. On smooth ground, the racing radial tires and 10-spoke wheels suit the car's road-going character and visually match the sharp lines of the McLaren body. The kit fits hobby sessions that combine body finishing, chassis assembly and later driving time, with the completed model equally at home in running sessions or parked where the body shape can be appreciated up close.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mercedes-AMG GT3 EVO, RC assembly kit, TT-02

€179.99

The Mercedes-AMG GT3 EVO arrives here as a 1:10 RC assembly kit on the TT-02 chassis, combining modern GT3 bodywork with a shaft-driven 4WD layout built for controlled on-road running. At 454 mm long, 189 mm wide and 120 mm high, the model carries the low, stretched proportions of the race car, while the 251 mm short wheelbase shapes a compact touring car footprint on the bench and on the circuit. The body is formed in lightweight polycarbonate and uses separate polycarbonate front light cases, plus individual rear wing and canard parts to define the front and rear aero surfaces with more depth. Separate black ABS parts depict the side mirrors and rear wing stays, adding contrast and sharper edge definition to the shell. The kit also includes Item 53415 Touring Car Urethane Bumper Sponge. LED lights are not attachable on the front light cases. A Type 540 Torque-Tuned Motor is specified in the kit data, and the included ESC completes the main electronics package supplied in the box. This combination suits measured assembly sessions, painted body finishing and repeated runs on smooth tarmac or indoor on-road surfaces. Radio gear, a battery pack, a charger and paints are required separately, so the build can be completed with the preferred running equipment and body finish.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mercedes-Benz CLK-GTR, RC assembly kit

€274.99

This 1:10 RC assembly kit pairs the 1997 Mercedes-Benz CLK-GTR with the TC-01 chassis, combining low GT racing proportions with a shaft-driven 4WD layout built for active on-road running. The polycarbonate body recreates the streamlined coupe form in a 470 mm length and 194 mm width, giving the finished car a long, planted stance that stands out on a circuit or display shelf. A 257 mm wheelbase sets the proportions, while silver mesh wheels and racing slick tires underline the competition look. The rear wheels use a wide tread, adding visual weight at the back of the car. Under the shell, the composite monocoque frame places the motor centrally and sends drive through front and rear propeller shafts with oil filled gear differentials. The suspension mirrors full-race thinking with A-shaped long arms and inboard front and rear setups, where push rods and rocker arms actuate the oil dampers. A rear transverse battery position also accepts 139 x 47 x 25 mm square-shaped battery packs. Adjustment options make the chassis rewarding to tune for repeated track sessions, with spacers and shims used to alter camber, skid and toe angle settings. Identical left, right, front and rear suspension arms and uprights help keep maintenance more straightforward when setup changes are part of the routine. A 540 motor and assembly guide are included. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Nissan Skyline GT-R R33, RC kit, TT-02D

€194.99

The 1:10 Nissan Skyline GT-R R33 RC assembly kit pairs the unmistakable shape of the fourth-generation Skyline with the TT-02D platform, a drift-focused version of the TT-02 chassis. With its 257 mm wheelbase, detailed polycarbonate body and large rear spoiler, the model brings the long, low stance of the R33 into a format built for controlled slides and precise line changes. The body shell is supplied with masking film for the windows, making paint preparation more straightforward while keeping the glazing areas crisp. An aluminum radiator detail adds another visual accent to the finished shell, and included stickers complete the exterior markings. Under the body, the shaft-driven 4WD layout channels power through a protected drivetrain, a useful setup when repeated drift runs put constant load through the transmission. CVA oil pressure shock absorbers support stable chassis movement, and full ball bearings help the running gear move with less friction. The included electronic speed controller and 540 electric motor complete the core drive system. Radio gear, a battery pack, a charger and paints are required separately. On a smooth indoor surface or a clean stretch of asphalt, the TT-02D layout supports long arcs, quick transitions and repeated practice laps. The finished chassis also leaves room to explore numerous TT-02 option parts available separately for further tuning and setup changes.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Opel Calibra V6 Cliff, RC assembly kit

€149.99

The 1:10 Opel Calibra V6 Cliff RC assembly kit brings 1990s touring car presence to the bench and the circuit with a low, wide body shape and a shaft-driven 4WD layout underneath. At 448 mm long, 185 mm wide and 128 mm high, with a 257 mm wheelbase, the model carries the proportions of the full-size race car into a format built for on-road running. The clear polycarbonate bodyshell is supplied with separate side mirrors and a rear wing, so the finished shell gains extra depth once painted and detailed. Stickers and masking stickers support the paint job and help place the Cliff race livery with crisp separation lines. The TT-01 Type-E platform places the drivetrain in a balanced bathtub frame, a layout widely used for approachable electric touring car builds. Silver ABS dish wheels complete the period race look and sit neatly under the broad fenders of the Calibra V6 body. This assembly kit suits focused build sessions as much as driving time, with each stage moving from body finishing to chassis setup in a clear sequence. On smooth tarmac and similar on-road surfaces, the long wheelbase, 4WD system and touring car proportions combine into a planted, circuit-style driving feel. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 Carrera RSR 2.8, RC assembly kit

€194.99

This 1:10 RC assembly kit pairs the unmistakable shape of the Porsche 911 Carrera RSR 2.8 with the adaptable BT-01 chassis, creating an on-road model that combines classic racing style and configurable mechanical layout. The lightweight polycarbonate body captures the low roofline, wide rear arches and purposeful silhouette in a form that suits both careful building sessions and finished shelf presence. At 457 mm long, 204 mm wide and 138 mm high, the model uses a 251 mm short wheelbase that matches the compact proportions of the full-size racer. The 2WD BT-01 platform is designed around changeable drivetrain architecture: attachment directions for the final gears and steering linkage can be altered to switch between front- and rear-wheel drive, while rear-wheel-drive builds can use either FR or MR motor position. Symmetrical 4-wheel double wishbone suspension and friction dampers give the chassis a clean, technical layout, and unitized sections for the motor mount, final gears and suspension keep the structure organized during the build and later maintenance. Silver wheels with a narrow front and wide rear arrangement reinforce the period racing look, and the separate red wheel caps add another layer of visual detail. A separate molded side mirror finishes the body shell with a distinct scale touch. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 Carrera RSR 2.8, RC assembly kit

€199.99

This 1:10 R/C assembly kit captures the compact racing shape of the Porsche 911 Carrera RSR 2.8 on the BT-01 chassis, pairing classic motorsport lines with a configurable 2WD layout. At 457 mm long, 204 mm wide and 138 mm high, the model has a planted on-road presence, while the lightweight polycarbonate bodyshell keeps the form crisp and detailed. The BT-01 center frame is designed so the battery pack, motor and R/C equipment can stay in place while the attachment directions of the final gears and steering linkage are changed to switch drive layout. Rear-wheel drive cars can also use front motor or midship rear motor positions, which gives the chassis a broader tuning range within one platform. Symmetrical 4-wheel double wishbone suspension and unitized sections for the motor mount, final gears and suspension keep the structure organized for assembly and maintenance. The body arrives pre-painted in PS-1 White, with PS-31 Smoke on the windows. Silver wheels with a narrow front and wide rear format reinforce the period racing look, and the slick tire setup suits smooth-surface running. Separate red wheel caps and a separate molded side mirror add finishing detail that stands out when the car is lined up on a shelf or set down for a session on asphalt. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Porsche 911 GT3 (992), RC body set

€39.99

This 1:10 RC body set brings the shape of the Porsche 911 GT3 (992) to compatible touring car chassis with a lightweight polycarbonate shell that is ready for cutting, painting and detailing. The separate rear wing and front light cases give the finished body more depth, whether it is being prepared for track use or built as a display-focused shell between running sessions. The set contains a clear polycarbonate body part set, marking stickers and masking stickers for painting. Black molded parts recreate the side mirrors and wing stays as separate exterior details, while metal attachment parts are supplied for mounting. The shell is compatible with TT-02, TT-01 and TT-01 Type-E chassis, excluding TT-02B and TT-02T. Fitment is limited to short 251 mm wheelbase chassis, and wide rear tread layouts need to be changed to a narrow rear tread setup. Chassis and cockpit parts are not included. On the bench, the clear shell leaves room for custom paint schemes, window masking and careful decal placement. Once mounted, the low, wide 911 silhouette, rear wing profile and detailed light areas give touring car builds a focused road-going race look.

Off-road RC cars

1:10 Porsche 911 GT3 992, RC assembly kit, TT-02

€184.99

This 1:10 R/C model assembly kit brings the Porsche 911 GT3 992 into a hobby format with a sharply formed polycarbonate body, separate rear wing and separate light cases. At 467 mm long, 188 mm wide and 131 mm high, the finished car has the low, stretched proportions that make the full-size GT3 instantly recognizable on the bench and in motion. The TT-02 chassis gives the model a 251 mm S-size wheelbase and a shaft-driven 4WD layout, pairing straightforward construction with a platform known for adaptable setup options. Separate black molded parts depict the side mirrors and wing stays, adding extra definition where painted body shells often flatten smaller details. Dark gun metal dish wheels sit under the body with a purposeful fit, and the included Urethane Bumper L supports the front end during running. The kit also comes with stickers and masking stickers, helping the paint scheme and exterior markings land with cleaner edges. During assembly, the separate wing, light cases and mirror parts create a more layered finish than a one-piece shell alone. Once built, the 4WD layout, radial tire setup and 251 mm wheelbase suit repeated laps on paved sections, car park courses and mixed club surfaces. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 GT3 R (992), RC assembly kit

€194.99

The Porsche 911 GT3 R (992) arrives here as a 1:10 R/C model assembly kit built on the TT-02 platform, combining a recognisable GT racing silhouette with a chassis layout made for accessible setup and consistent on-road driving. At about 479 mm long, 188 mm wide and 127 mm high, the finished car has the low, stretched stance that suits circuit-style running and shelf presence alike. Its polycarbonate bodyshell is pre-painted in Black and Gun Metal, with Smoke windows, a black rear wing and black light cases already finished for a clean race-ready look. Separate black parts depict the side mirrors and wing stays, adding extra definition to the body shape without turning the build into a paint-heavy project. The set also includes Item 51226 Urethane Bumper L for the TT-01 and TGS, fitted to help protect the body during regular running. Stickers and masking stickers are supplied for added detail in the finishing stage. Under the shell, the shaft-driven 4WD layout works with the short 251 mm wheelbase to keep the car composed through bends and direction changes. Black 10-spoke wheels and slick tires suit paved surfaces and complete the GT race character. The included instructions support the assembly process, while radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC 1000 TCR Berlina Corse, RC assembly kit

€164.99

This 1:10 RC assembly kit pairs the compact Fiat Abarth 1000 TCR Berlina Corse with the MB-01 chassis, creating a model that combines classic touring-car character with a highly adjustable 2WD layout. The clear polycarbonate bodyshell captures the widened fenders, compact proportions and racing stance in a lightweight form suited to hobby assembly. At the core is the multi-purpose MB-01 platform, which can be built with 209 mm, 224 mm or 239 mm wheelbase settings and configured for either front- or rear-wheel drive, giving 6 total setup patterns. Rear-wheel drive layouts also allow a choice of low or high motor position, adding another layer of chassis tuning. Unitized sections such as the motor mount and final gears simplify maintenance access and keep setup changes straightforward. A 540 motor and electronic speed controller are included, and the standard 29T pinion gear gives a 5.83:1 gear ratio. The symmetrical 4-wheel double wishbone suspension uses friction dampers, and the chassis is also compatible with many Hop-Up Option parts for M-chassis and TT-chassis cars. On the finished car, the front 55 mm tires and rear 60D tires echo the staggered tire sizing of the original racer and give the model a distinct stance on the track. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Renault Alpine A110 Jaeger RC assembly kit

€164.99

This 1:10 RC assembly kit recreates the Renault Alpine A110 Jaeger in its 1973 racing livery on the M-06 platform, combining a compact coupe silhouette with rear-wheel drive proportions. At 395 mm long, 168 mm wide and 121 mm high, the finished model has a low, planted stance, while the 210 mm wheelbase keeps the classic short-wheelbase layout true to the subject. The bodyshell uses 1.0 mm polycarbonate, and the separate detail parts let the front and rear sections stand out with more definition after painting and final assembly. Stickers are included for sponsor logos, race numbers and other markings, and masking stickers support clean window and light areas during the paint process. The orange Jaeger livery links the model to the Alpine A110 that raced in period circuit competition, while the coupe form reflects the lightweight original introduced in 1963. Radio gear, a battery pack, a charger and paints are required separately. On the bench, the shell offers a focused finishing sequence with trimming, painting and decal placement before mounting to the chassis. Once assembled, the RR layout, short wheelbase and axle-specific tire combination give the model a distinct driving character for home tracks, club sessions or display between runs.

On-road RC cars (2WD/4WD)

1:10 Skyline GT-R (R32), RC assembly kit, TT-02D

€234.99

The 1:10 Skyline GT-R (R32) RC assembly kit pairs the unmistakable shape of Nissan's 1989 performance icon with the TT-02D drift chassis for on-road driving that favors angle, control and scale presence. At 452 mm long with a 257 mm wheelbase, the finished car carries the long, low proportions of the R32 clearly across the body shell. The body is formed in lightweight polycarbonate and uses separate molded parts for the side mirrors and rear wing, so the shell keeps crisp exterior definition beyond the main molding. Marking stickers add the final exterior graphics, and export versions of the kit include LEDs. Under the shell, the TT-02D is the drift-spec version of the shaft-driven 4WD TT-02 entry chassis and is compatible with TT-02 option parts. The setup combines 24 mm drift tires, mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and an aluminum motor heat sink to support repeated on-road drift runs with stable response. This assembly kit suits bench building as much as driving time, with body trimming, painting and decal placement shaping the final finish before the chassis takes to smooth tarmac. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Subaru WRX STI, RC assembly kit, TT-02

€159.99

This 1:10 RC assembly kit recreates the Subaru WRX STI that won the SP3T class at the Nurburgring 24 Hours in May 2016, combining endurance-race character with the accessible layout of the TT-02 chassis. The lightweight polycarbonate bodyshell captures the aerodynamically optimized race form, and the see-through finish leaves room for a clean, detailed paint job. Separately molded side mirrors and rear wing add sharper definition to the shell, while the included stickers and masking stickers support an accurate recreation of the car's race markings. Gun metal mesh-style wheels give the model its competition look, and the slick tyres suit smooth running surfaces. The TT-02 platform is designed for straightforward maintenance and broad adaptability, which makes it a strong base for setup changes over time. An extensive line-up of optional TT-02 tuning parts is available for builders who want to refine the chassis further. On a paved circuit, the encapsulated 4WD system, independent suspension and 540 Torque-Tuned motor come together in a layout that suits repeated laps and steady control inputs. The kit contains the model, a detailed illustrated assembly manual, an electronic speed controller, a 540 electric motor and the polycarbonate body. Radio gear and a battery pack are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Super Avante, RC assembly kit, 4WD

€349.99

The 1:10 Super Avante RC assembly kit pairs the TD4 chassis with a low, futuristic buggy form built for fast off-road running. Shaft-driven 4WD and a midship transverse motor layout give the chassis a balanced power path, while the blue and yellow body, rear wing and yellow wheels create a sharp racing presence on dirt and gravel. At the front, the inboard suspension works through push rods and rocker arms that actuate laid-down oil dampers, a layout more often seen in competition-focused designs. The rear end uses 4 CVA oil dampers, and both front and rear suspension systems are independent double wishbones. Sealed front and rear gearboxes with built-in ball differentials support consistent drivetrain action when the surface turns loose or uneven. The polycarbonate body shell is joined by separate front and rear fenders and a rear wing, giving the buggy its distinctive Super Avante silhouette. Radio gear, a battery pack, a charger and paints are required separately. On a compact dirt track, the knobby tyres and 4WD layout support repeated launches, braking points and quick line changes. Open gravel sections and uneven ground let the suspension travel, oil dampers and sealed driveline show their strengths in sustained running sessions.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 T/GR Yaris Rally1 Hybrid, RC assembly kit

€159.99

This 1:10 RC assembly kit brings the T/GR Yaris Rally1 Hybrid onto the TT-02 platform with a polycarbonate bodyshell that captures the compact, aggressive rally silhouette in 416 mm length, 190 mm width and 146 mm height. Separate polycarbonate front light cases add layered detail to the nose, while the 257 mm wheelbase gives the chassis the proportions required for this body style. Black molded parts reproduce the side mirrors, side ducts, caps and the 2-piece large rear wing, adding the distinct aero elements seen on the full-size rally machine. Under the shell, the shaft-driven 4WD TT-02 chassis uses a straightforward longitudinal layout that keeps the drivetrain centered and supports stable running characteristics. Dark gun metal multi-spoke wheels and racing radial tires complete the stance, while the included urethane bumper supports body fitment at the front. The box also provides stickers and masking stickers for the paint job, helping the livery and window areas come out with cleaner separation. On the bench, the kit offers a focused build with body finishing, chassis assembly and detail fitting all tied to one clearly defined rally subject. Once assembled, the combination of the Torque-Tuned motor and ESC supports brisk running sessions on paved ground, while radio gear, a battery pack, a charger and paints are required separately.

RC buggys (2WD/4WD)

1:10 The Grasshopper Black Edition, RC buggy

€114.99

The Grasshopper Black Edition brings the classic Tamiya off-road silhouette into 1:10 scale with a darker visual treatment that gives the buggy a crisp, purposeful presence in motion and at rest. As a radio-controlled ground vehicle, it combines the recognisable single-seat racer shape with hands-on driving input, creating a model that stands out both as a build and as a running machine. The Black Edition designation shifts the look away from the standard finish and places more emphasis on the body form itself, so the buggy reads clearly from nose to rear wing. The 1:10 format gives the model a substantial footprint for steering, throttle control and line choice across smooth outdoor surfaces. Battery-powered operation is part of the driving concept, while batteries are not included. The data identifies this version as part of Tamiya's powered vehicle range, placing it firmly in the RC hobby space rather than static display alone. On a paved path, patio or similar open area, the buggy format lends itself to repeated starts, direction changes and short runs that keep the radio-control experience active. Between driving sessions, the dark finish and familiar Grasshopper profile also give the model a strong shelf presence for collectors who appreciate long-running RC names.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 The Grasshopper i 2005, RC buggy kit, 2WD

€119.99

The Grasshopper i 2005 brings classic 1:10 RC buggy style into a build centered on rear-wheel-drive action, a lightweight 830 g layout and the unmistakable stance of an 80s-inspired off-road racer. Its polycarbonate body, detailed illustrated assembly instructions, electronic speed controller and 380 electric motor come in the kit, creating a clear starting point for hands-on assembly and outdoor running. The chassis measures 389 mm long, 223 mm wide and 135 mm high, giving the buggy a low, planted profile with enough width for stable tracking on loose ground. At the front, independent swing axle suspension handles steering inputs with visible mechanical movement, while the rolling rigid rear axle preserves the original Grasshopper character. A sealed rear gearbox helps protect the differential gear when the buggy is driven on dirt and other rough surfaces. The chassis is also compatible with a 540 type motor sold separately, which opens the door to a later power change without changing the model identity. On compact off-road courses, packed gravel or smooth tarmac, the 2WD layout creates a direct connection between throttle input and rear traction. The illustrated build process suits hobby sessions at the workbench, and the finished buggy carries that same mechanical clarity into running sessions where suspension travel, tyre stance and classic racing lines stay fully visible. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 The Grasshopper II, RC buggy assembly kit

€119.99

The Grasshopper II returns in this 2017 1:10 R/C buggy assembly kit with the lean proportions, exposed suspension and rear-drive layout that made the original late-1980s machine so distinctive. At 400 mm long, 221 mm wide and 139 mm high, the model carries a compact off-road stance that looks right at home carving across packed dirt and loose gravel. An ABS resin bathtub chassis forms the core structure, keeping the running gear organized in a simple, accessible layout. The kit uses a 2WD drivetrain and a fully enclosed rear gearbox, so the differential works inside a protected housing while the rear axle delivers power to the ground. One-piece 8-spoke wheels pair with ribbed front tyres and spike rear tyres, a classic buggy combination that separates directional control from traction. A 380 size motor and electronic speed controller are included, and the platform is also compatible with selected tune-up parts such as standard Type 540 motors and CVA mini oil dampers. The white polystyrene resin body gives painting and decal work a crisp base, and the included driver figure adds cockpit detail once attached to the shell. Radio gear, TS spray paint, a 7.2 V battery and a compatible charger are required separately. On a garden path, hard-packed track or dusty open ground, the suspension movement, rear-drive balance and period buggy styling come together in a model that suits both display between runs and regular outdoor driving sessions.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Toyota 4x4 Pick Up Bruiser 2012 RC kit

€819.99

This 1:10 RC assembly kit recreates the Toyota Hilux Pick-Up RN36 with the tall, high-lift stance that made the 1980s truck so distinctive. At 525 mm long, 278 mm wide and 275 mm high, the model carries real visual presence, while the ladder frame layout brings the structure of the full-size vehicle into the build itself. The chassis uses a longitudinally mounted Type 540 motor, a shaft-driven 4WD system and front and rear 6-pinion differential gears. Gear ratios of 54.63:1 in 1st, 40.49:1 in 2nd and 27.92:1 in 3rd define how the 3-speed transmission changes the driving feel across terrain. Front tread measures 200 mm, rear tread 218 mm, and the complete model weighs 3.2 kg. Metal parts are used throughout for a strong mechanical look, and the live axle setup reflects the full-size truck with metal axle housings, leaf springs and oil dampers. The detailed body, flared fenders and large tyres suit shelf display just as naturally as outdoor running on loose ground. Radio gear, a battery pack, a charger, transmitter batteries and an electronic speed controller are required separately.

On-road RC cars (2WD/4WD)

1:10 Toyota Celica GT-Four RC, RC assembly kit

€154.99

This 1:10 RC assembly kit brings the Toyota Celica GT-Four RC (ST185) onto the TT-02 platform with a bodyshell that carries the coupe's curved profile, rear wing, side mirrors and distinctive rally-era character. At 450 mm long, 187 mm wide and 136 mm high, with a 257 mm wheelbase, the finished car has the proportions to fill the chassis cleanly and present the Celica shape with convincing scale presence. The bodyshell uses 1.0 mm polycarbonate, keeping weight low while allowing the painted finish and sticker set to define the model's exterior details. Masking stickers are supplied for the window areas, helping the paint job stay crisp around the glazing lines. Under the shell, the shaft-driven 4WD TT-02 chassis uses a straightforward drivetrain layout that suits regular on-road running and setup work alike. An included Type 540 Torque-Tuned motor and ESC complete the core drive package for electric RC use. 5-spoke wheels and tread pattern racing radial tires reinforce the road-going look and match the Celica's classic performance style. On a smooth car park, club track or driveway, the combination of 4WD traction and the TT-02 layout supports controlled cornering and clean acceleration. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Celica GT-Four RC, RC assembly kit

€154.99

The 1:10 Toyota Celica GT-Four RC assembly kit brings the shape of the ST185 to the TT-02 platform with a pre-painted 1.0 mm polycarbonate bodyshell, white finish, smoke-tinted windows and a full-size stance set by the 257 mm wheelbase. At 450 mm long, 187 mm wide and 136 mm high, the model carries the proportions of the homologation road car into an on-road R/C format with clear visual presence. The TT-02 chassis uses a shaft-driven 4WD layout and front and rear double wishbone suspension with coil spring dampers, giving the running gear a straightforward, widely used base for tuning and maintenance. Pre-cut wheel arches and pre-made body mount holes reduce body preparation work, while stickers and masking stickers support the final exterior finish. The bodyshell still requires cutting out, attachment work and detail painting on selected parts. Cockpit parts and driver are not included. On-road sessions highlight the long, curved body lines, rear spoiler and 5-spoke wheel design as the car tracks through sweepers and tighter sections. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Toyota Celica GT-Four ST205, body set

€40.99

This 1:10 body set brings the shape of the Toyota Celica GT-Four ST205 to compatible touring car chassis with a clear polycarbonate shell that is ready for trimming, painting and detailing. The 1.0 mm body captures the coupe profile with defined lamp recesses, grille lines, hood scoop contours and a prominent rear wing, giving the finished car the sharp road-going stance of the original model. The set is supplied as a clear body part package for builders who want to create a custom finish rather than start with a prepainted shell. Marking stickers add model names, light graphics and trim details, while masking stickers help keep window sections and paint lines clean during the spray process. Metal parts for attachment are also included, supporting the mounting work needed before the shell goes onto the chassis. The body is made for 257 mm wheelbase cars and is compatible with TT-01 Type-E and TT-02 platforms, excluding TT-02B, TT-02T and TT-02FT. On the bench, the clear shell allows each stage of the finish to be planned around the molded panel lines and cut points. Once mounted, the low coupe shape, rear spoiler and Celica-specific detailing give touring car runs a distinct late-1990s performance look with a body style that stands out on tarmac layouts and display shelves alike.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota GR 86, RC assembly kit, TT-02

€154.99

The 1:10 Toyota GR 86 brings modern coupe styling to a radio control build centered on the TT-02 chassis, a shaft-driven 4WD platform made for on-road running. Its 257 mm wheelbase gives the body its correct stance over the chassis, and the low, wide shape reads clearly whether the car is lining up for a first shakedown run or sitting on the bench between build stages. The body is formed in polycarbonate and arrives as an assembly kit, so the shell is trimmed, painted and finished with markings during the build. Separate sidemirrors, light cases, masking stickers and body fittings add definition to the final look, while the body mounts are adjusted so the shell clears the tyres and track surface correctly. Front and rear suspension geometry is handled by double wishbones with coil spring damping, a layout that supports predictable handling on paved surfaces. The package also includes an electronic forward and reverse speed controller. Radio gear, a battery pack, a charger and paints are required separately. On the workbench, the GR 86 body gives the build a clear sequence of cutting, masking and finishing steps that show off the model's detailed lines. Once assembled, the TT-02 platform suits car park sessions, smooth tarmac circuits and other paved spaces where a 4WD touring chassis can stretch out cleanly.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Toyota Land Cruiser 40, RC assembly kit, CC-02

€264.99

This 1:10 RC assembly kit recreates the Toyota Land Cruiser 40 with the upright proportions and expedition character that made the original 4WD so distinctive. At 390 mm long, 198 mm wide and 237 mm high, the model has a substantial trail-ready presence, and the polycarbonate body keeps the shell light while preserving the crisp, boxy silhouette of the 1972 FJ40V. Under the body sits the CC-02 cross country chassis, developed for off-road driving and built around a ladder frame layout inspired by full-size vehicles. The 252 mm M-size wheelbase sets the proportions, and short 76 mm propeller shafts are included as part of the drivetrain package. Separately molded roof rack and light pod parts extend the scale look above the body line, while the detailed shell is joined by grille, mirror and indicator components that sharpen the finished appearance. A Type 540 motor and included ESC complete the core running hardware. The clear body is supplied unpainted, leaving room for a custom finish on domestic or export style builds. Radio gear, a battery pack, a charger and paints are required separately. Once assembled, the combination of block tread tires, scale bodywork and cross-country chassis layout suits rocky paths, compacted dirt and shelf display between running sessions.

Off-road RC cars

1:10 Toyota Land Cruiser 40, RC assembly kit, CC-02

€274.99

The 1:10 Toyota Land Cruiser 40 assembly kit brings classic 4WD character to the CC-02 platform with a yellow pre-painted body and the upright proportions of the 1972 FJ40V. At 390 mm long, 198 mm wide and 237 mm high, the model has the tall, square stance that makes the Land Cruiser 40 instantly recognizable on a trail course or shelf. The polycarbonate bodyshell keeps weight down, while separate molded parts add definition to the grille, mirrors, turn signals and roof rack with light pods. A 252 mm M-size wheelbase sets the proportions on the chassis, and the included 76 mm short propeller shafts match the layout. Oil-filled dampers support the chassis over uneven ground, and the ladder frame construction follows the full-size vehicle theme with a structure suited to cross-country driving. Silver 12-spoke wheels and block pattern tires complete the period look, and the sticker set combines window and window frame sections to reduce extra paint work during finishing. Cockpit parts and a driver figure add another layer of scale detail once the body is completed. The finished model suits slow trail sessions, obstacle lines and display between runs, with the roof rack, raised ride height and classic Land Cruiser shape giving it a strong presence in each setting. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Supra (JZA80), RC assembly kit, BT-01

€184.99

The 1:10 Toyota Supra (JZA80) RC assembly kit combines the long, low shape of Toyota's 1993 flagship sports car with the adaptable BT-01 platform for a build that stays engaging well beyond the first setup. At 457 mm long, 185 mm wide and 135 mm high, the finished car carries a strong on-road stance, while the 257 mm wheelbase gives the Supra body its stretched, planted proportions on the chassis. The BT-01 center frame is designed so battery pack, motor and R/C equipment can stay in place while drivetrain layout changes are made around them. By changing the attachment directions of the final gears and steering linkage, the chassis can be reconfigured between front-wheel drive and rear-wheel drive layouts. For rear-wheel drive, both front motor and midship rear motor positions are available, giving 6 total setup patterns across the platform. A Type 540 Torque-Tuned motor and ESC are included, and many Hop-Up Option parts for TT-chassis cars can be used for further tuning. That combination suits builders who enjoy comparing chassis behavior on the same body shell instead of moving to a completely different car. On-road sessions, setup testing and workshop adjustments all gain extra depth from a platform that can be rebuilt around different drive and motor positions while keeping the Toyota Supra (JZA80) identity at the center of the project.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Supra, RC assembly kit, TT-02D

€194.99

The 1:10 Toyota Supra on the TT-02D platform brings a well-known sports car shape into a drift-focused RC assembly kit with a 257 mm wheelbase and a detailed polycarbonate bodyshell. The body traces the aggressive lines of the original release from kit 58392, and carbon pattern decals for the engine hood and rear wing add a tuned street-racing look once the shell is finished. This version uses the TT-02D drift spec, a specially tuned form of the TT-02 chassis built around shaft-driven 4WD. Separately molded side mirrors and rear wing parts add extra scale definition, while an aluminum motor heat sink supports the included 540 SPORT TUNED motor during running. An electronic speed controller is included in the kit, so the core drive package is already matched to the chassis layout. The 24 mm Drifttech tires sit on metal-plated mesh wheels, giving the model the right contact patch and visual style for drift sessions. On a smooth indoor surface or a prepared hobby track, the combination of drift tires, oil dampers and the TT-02D layout supports long slides, quick direction changes and steady transitions. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Toyota Tundra HighLift, RC assembly kit

€559.99

The 1:10 Toyota Tundra HighLift brings the shape of the second-generation double cab pickup into an RC assembly kit with a tall stance, large-diameter tyres and a chassis layout that follows the full-size truck closely. At 500 mm long, 216 mm wide and 238 mm high, the model has a broad road presence, and the combination of an injection-moulded bodyshell and exposed underframe gives it a convincing scale look whether it is parked on a shelf or moving over rough ground. Much of the character comes from the construction itself. Metal parts are used for the ladder frame, leaf springs and friction dampers, so the running gear has the same visual weight as the body above it. An RS540 motor and ESC handle the drive, while the 3.1 kg chassis gives the truck a planted feel. The set also contains custom parts including a roll bar, grille guard and roof carrier with 2 snowboards, allowing different finished looks without changing the core truck design. The 3-speed gearbox and shaft-driven 4WD suit slow trail sections, uneven surfaces and more open stretches where the taller ratio can be used. On a workbench, the detailed mechanical layout keeps the build engaging; on the ground, the long frame, rigid axles and pickup proportions create the unmistakable presence of a lifted truck. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Volkswagen Golf II GTI 16V, RC assembly kit

€164.99

This 1:10 R/C model assembly kit captures the Volkswagen Golf II GTI 16V in a compact hatchback form with a lightweight polycarbonate bodyshell and a long 239 mm wheelbase. At 383 mm long, 170 mm wide and 138 mm high, the model combines classic road-car proportions with a chassis layout built for hands-on assembly and tuning. Under the shell sits the MB-01 chassis in a front-motor, front-wheel-drive configuration. Its center frame allows changes between front- and rear-wheel drive by altering the attachment directions of the final gears and steering linkage, and rear-wheel-drive setups can also use a low or high motor position. The chassis also offers 3 wheelbase choices, giving broad scope for layout changes within the same platform. A 4-wheel double wishbone suspension with symmetrical structure and friction dampers manages movement at each corner, while unitized sections for the motor mount, final gears and suspension support straightforward maintenance. Separate black molded parts depict the side mirrors and bumpers, and transparent parts form the headlights and taillights for a more complete exterior finish. Porous dish wheels are paired with radial tires to match the road-car character of the subject. The bodyshell is not pre-painted. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 VW Beetle Rally, RC assembly kit, 4WD

€174.99

The 1:10 VW Beetle Rally pairs a classic rally silhouette with the MF-01X chassis, creating an RC assembly kit that looks distinctive on the bench and carries that character onto road and flat dirt. At 397 mm long and 163 mm wide, the model uses a 239 mm L wheelbase that gives the Beetle body its correct stance while leaving room for the shaft-driven drivetrain layout underneath. The clear polycarbonate shell recreates the Beetle's rounded form, and separate metal-plated parts are used for the bumpers and side mirrors. Front light pods and rally-style stickers shape the competition-inspired finish without changing the unmistakable Beetle profile. Under the shell, power from the Type 540 Torque Tuned electric motor is transmitted through gear differentials, with drive routed to the rear wheels and forward by propeller shaft to the front axle. The chassis can also be assembled into S and M wheelbases with separately sold propeller shafts. An electronic speed controller is included. Radio gear, a battery pack, a charger and paints are required separately. On smooth tarmac, the 4-wheel double wishbone layout helps the chassis stay composed through direction changes, while on flat dirt the rally block tires and independent suspension work with the shock absorbers to keep the model moving with control. The result is a build that combines detailed body finishing, mechanical layout and mixed-surface running in one focused RC project.

Stickers

1:10 VW Golf II GTI 16V Sticker Bag, decal set

€14.29

This 1:10 sticker bag is made for the VW Golf II GTI 16V Street body and brings the shell closer to its full road-car look with model-specific graphics and masking pieces. The decal sheet carries body-side stripes, grille elements, headlight graphics, rear light details, wipers and Volkswagen Golf markings, while the separate masking sheet prepares the clear body for paint work on the window areas. The masking stickers are cut for front, rear, left front, right front, left rear and right rear window sections, so the paint stage can follow the body lines more closely. Larger masks use a center strip in the lining to help keep placement aligned while the backing is removed. Smaller round and side pieces support detail work around secondary areas of the shell. A separate label section adds ON, OFF and caution markings that suit switch locations and finishing touches on the completed model. On the bench, this set supports the paint and detailing stage rather than the mechanical build, giving the shell the trim contrast and printed markings that define the Golf II GTI 16V shape. It suits replacement work on a used body as well as a fresh finish on a new shell where crisp window borders and accurate exterior graphics matter.

On-road RC cars (2WD/4WD)

1:10 VW Golf II GTI 16V, RC assembly kit, MB-01

€185.99

This 1:10 R/C assembly kit captures the Volkswagen Golf II GTI 16V in rally form on the MB-01 chassis, pairing a compact hatchback shape with a front motor, front-wheel drive layout. The lightweight polycarbonate bodyshell arrives pre-painted in PS-34 Red with PS-31 Smoke, so the body lines, window tint effect and overall stance come together quickly once mounted on the chassis. The model measures 383 mm in length, 170 mm in width and 138 mm in height, with a long 239 mm wheelbase that suits the MB-01 configuration used here. Separate black molded parts recreate the side mirrors and bumpers, while transparent components depict the headlights and taillights with added depth. A 540 torque-tuned electric motor and an electronic speed controller are included. The MB-01 platform also uses unitized sections for the motor mount, final gears and suspension, a layout that keeps the structure organized during assembly and later maintenance. On the bench, the combination of 4-wheel double wishbone suspension, friction dampers, porous dish wheels and radial tires gives the chassis a clear mechanical character. Once built, the compact proportions and FF drivetrain make it well suited to tight driving lines and flowing runs on smooth ground. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 VW Karmann Ghia, RC assembly kit, M-06

€174.99

The 1:10 VW Karmann Ghia RC assembly kit brings a classic coupe silhouette to the M-06 platform, combining vintage road-car character with a rear-wheel-drive chassis layout. Its lightweight polycarbonate body reproduces the flowing roofline and compact proportions of the original, while separate plated parts for the side mirror, bumpers and light cases sharpen the finished look. This version uses the 239 mm wheelbase M-06L chassis. The rear-mounted motor works with a longitudinal battery pack, and the R/C units sit on either side to keep the layout low and evenly balanced. That arrangement gives the chassis a low center of gravity and a composed feel through direction changes. Marking stickers and masking stickers are included for the paint job, allowing the exterior trim and lighting details to be finished with clean separation. Metal-plated wheels complete the period look and work with the tyre setup to support stable cornering. With overall dimensions of 410 x 182 x 125 mm, the model has enough size to show off the Karmann Ghia shape both on the bench and in motion. It suits builders who enjoy body finishing as much as chassis setup, and it leaves room for later tuning with Hop-Up Option parts available for the M-06 platform.

On-road RC cars (2WD/4WD)

1:10 XV-01 Lancia Delta HF Integrale, RC assembly kit

€284.99

The 1:10 XV-01 Lancia Delta HF Integrale brings classic rally form to a front-motor 4WD platform built for active driving. Its 407 mm length, 186 mm width and 155 mm height give the bodyshell a planted stance, while the 257 mm wheelbase supports stable tracking through sweeping turns and quick direction changes on mixed surfaces. This RC assembly kit pairs the XV-01 layout with an electric Type 540 motor and rally-focused running gear. Block tread tyres on white wheels suit the car's off-road character, and the electronics box groups the receiver and controller inside the chassis. Metal-plated side mirrors and grille parts add crisp finishing detail beyond the main shell. The decal sheet and painting aid support accurate body finishing, and the illustrated assembly instructions guide the build. Radio gear, a battery pack, a charger and paints are required separately. On a compact dirt course, gravel path or smooth tarmac with dust and debris, the enclosed drivetrain layout and adjustable geometry give the chassis room to be tuned for the surface in use. The result is a rally model that combines scale presence, hands-on building and chassis setup in one focused machine.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda CBR1000RR-R FIREBLADE SP, model kit

€49.99

This 1:12 plastic model assembly kit recreates the Honda CBR1000RR-R FIREBLADE SP 30th Anniversary as a detailed display motorcycle with a compact 176 mm length, 68 mm width and 96 mm height. The finished model stretches to 191 mm long and 97 mm high when placed on the included racing stand, giving the superbike silhouette a lifted paddock look that suits shelf or desk display. The build centers on major motorcycle structures such as the engine, swing arm, front fork and muffler, which attach to the frame with screws. That construction method gives the model a clear mechanical layout while supporting precise placement of the main assemblies. A choice of pillion seat or optional single seat cowl changes the rear profile to match different display preferences. The side cowl, under cowl and fuel tank cover can be removed after completion, opening up views of the inner structure and making the finished motorcycle more interesting to examine from multiple angles. Masking stickers support the paint job on smaller sections and color separations, while paints and cement are required separately. On a workbench, the combination of removable panels, screw-attached main units and detailed exterior surfaces creates a focused motorcycle build with plenty to study during each stage. Once completed, the tricolor graphics, treaded tires and racing stand give the model a strong showroom and pit-lane presence.

Model motorcycle kits 1:12

1:12 Honda CBR110XX Super Blackbird, model kit

€38.49

This 1:12 Honda CBR110XX Super Blackbird model kit recreates the 1996 supersport motorcycle with its long, aerodynamic fairing and tightly packaged mechanical layout. As the body panels, frame and liquid-cooled inline 4-cylinder engine come together, the finished machine takes on the low, fast profile that made the original road bike so distinctive. The kit is designed as a plastic assembly model, with separate sections for the suspension, front fork, exhaust, radiator and rear lighting. Small screws are used to mount the engine and cowling to the frame, which helps show how the major assemblies connect on the full-size motorcycle. Metal-plated parts are used for the dual headlight case, exhaust and front forks, adding a different surface finish from the painted body panels. The build also uses vinyl tubing in multiple cut lengths to represent hoses and lines around the engine and front end, while mesh inserts and decals add cockpit and fairing detail. Assembly takes about 600 minutes. On the bench, the model supports a measured, step-by-step build with visible progress across the chassis, engine and bodywork. Once completed, the motorcycle sits as a detailed display piece that suits a shelf, desk or cabinet with the unmistakable shape of the Super Blackbird.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda VFR 750R 1987, plastic model kit

€30.99

This 1:12 plastic model kit recreates the Honda VFR 750R from 1987, a road-legal machine developed from the RVF750 endurance racer and known for its tightly packaged, competition-focused design. The finished motorcycle brings that character into scale with a full fairing, clear windscreen, twin round front headlights, mirrors, white wheels and a large exhaust that define the bike's unmistakable silhouette. The original 748cc liquid-cooled V4 with 16 valves was engineered to stay compact, and that compact layout shapes the model's proportions as well. Structural features from the real machine are part of the subject itself, including the twin-spar aluminum box frame, the single-sided Pro-Arm rear swing arm and the center-lock rear wheel hub. Honda's 1987 machine stood out for its use of advanced materials such as titanium, carbon-fiber, kevlar and magnesium, and the model reflects that high-spec concept through its sharply defined race-bred bodywork and mechanical layout. Assembly is required, and the stated assembly time is 600 minutes. On the bench, the build suits careful trimming, painting and decal work; once completed, the bike sits naturally as a display piece in a motorcycle collection. Radio gear is not part of this kit, and the included contents are the assembly kit itself.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:12 Lunch Box EVO, RC model kit, CW-01E

€214.99

The 1:12 Lunch Box EVO brings the tall van shape and wheelie-ready character of a Tamiya classic to the updated CW-01E chassis. With a length of 390 mm, width of 295 mm and height of 220 mm, the model keeps its unmistakable proportions while the revised layout gives it a more settled feel on the move. A tub frame chassis forms the base of the kit, and the EVO revision adds detail that changes how the model behaves on the ground. The front strut brace increases chassis rigidity and also serves as a transponder mount. The body used here matches the version from item 58347, while the longer wheelbase and wider track compared with that earlier release sharpen traction and drivability. A new decal sheet supports the finishing stage with fresh markings for the ABS shell. Running sessions on tarmac, packed dirt or open paved areas make the most of the 2WD layout and the model's lively stance. Radio gear, a battery pack and a charger are required separately. The combination of classic Lunch Box styling, updated geometry and detailed kit construction gives the EVO version a strong presence both on the bench and in motion.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:12 Lunch Box Re-Release, RC assembly kit

€164.99

The Lunch Box Re-Release brings back a classic Tamiya van with a 1:12 scale body, oversized 115 mm tyres and a lifted monster truck stance that turns every run into a rolling centrepiece. First released in 1987, this RC assembly kit combines the boxy shape of a custom panel van with the tall proportions and visual punch of big-wheel off-road styling. The white ABS body and yellow ABS wheels give the model a strong period look straight from the workbench, while the side panels offer broad surfaces for custom paint and graphics. Drive comes from an included 540 brushed motor, and reverse speed control with low voltage protection is equipped for brushed running. The chassis layout stays true to the original concept with a box type frame, 2WD drive, front swing axle and rear rolling rigid suspension. That combination creates the tall ride height and lively character that made the Lunch Box such a memorable name in RC history. On tarmac, packed dirt or open paved space, the van's high stance and large tyres create an unmistakable presence as it bounces, turns and charges ahead. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Arocs 4151 Tipper 8x4, RC assembly kit

€769.99

This 1:14 RC assembly kit brings the Mercedes Benz Arocs 4151 to the workbench as an 8x4 tipper with a long 667 mm chassis, a forward-tilting cab and the purposeful stance of a heavy construction truck. The cab, body parts and vessel are pre-painted in TS-52 Candy Lime Green and TS-29 Semi-Gloss Black with a clear top coat, so the distinctive excavator-tooth grille and protective lamp grilles stand out straight away. Under the cab, an aluminum ladder frame carries proven Tamiya truck technology in a layout shaped for heavy-duty road and site driving. The 2 rear axles are powered, while the 2 front axles are steered separately and use different steering angles to match the behavior of the original truck. Green exterior parts and black interior parts define the finish, and the completed model weighs about 4 kg, adding substance to the build. The tipping body is designed for use with the optional ACU-01 spindle drive unit, and an optional multifunction unit can simulate light and sound functions from the full-size vehicle. On the bench, the model offers a detailed truck build with visible frame structure, drivetrain layout and body mounting points. Once equipped for radio control, it suits slow, deliberate maneuvering, trailer work with an added tow bar, and realistic tipping scenes that echo construction-site operation. Radio gear, a battery pack, a charger, servos, a speed controller and the ACU-01 unit are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 FH16 Timber Truck, RC assembly kit, 3-speed

€679.99

The 1:14 FH16 Timber Truck is an RC assembly kit built around the long-bed timber hauler layout, with a detailed ABS cab, upright stakes and a full-size truck stance across 733 mm length, 194 mm width and 306 mm height. The Volvo FH16 Globetrotter form is recreated with a photo-etched grille, interior cab details and a rear section shaped for log transport styling. Its chassis follows a ladder-frame construction with aluminum side channels and resin cross members, while a front-mounted motor sends drive through a metal propeller shaft to the rear axles. Each rear axle uses its own metal differential, and the suspension combines metal leaf springs with friction dampers for a mechanical layout that closely reflects the full-scale vehicle. The rear bed uses reinforced resin and metal parts for the stakes and tailgate, and new rear tyres with off-road tread add a more purposeful forestry-truck look. The cab is screwed in place and removable, and space behind the seats allows installation of the separately available MFC-03 multifunction unit. On the bench, the model offers a build centered on truck engineering details rather than a simplified shell-over-chassis format. Once assembled, the 3-speed transmission brings a more involved driving rhythm, especially on longer runs where shifting changes the truck's pace and character. A 4-channel radio system, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Ford Aeromax, RC truck kit, 3-speed gearbox

€454.99

The 1:14 Ford Aeromax RC truck kit brings long-haul tractor styling into a large-format build with a 614 mm length, a 190 mm width and a stretched 447 mm wheelbase that gives the model the presence of an American highway rig. A servo-shifted 3-speed transmission mounted at the front of the aluminum ladder frame adds a mechanical driving function that goes beyond simple forward motion, with 32.49:1, 17.76:1 and 10.66:1 gear ratios to change how the truck responds on the move. The chassis layout uses tandem rear axles and a fifth-wheel coupling plate, matching the structure of a real tractor unit rather than a generic road vehicle. At 2900 g, the model has the mass to suit measured, realistic running, and the chrome wheels with radial tires reinforce the full-size truck character. Front and rear tread measurements of 156 mm and 138 mm, plus 22 mm tire width at both ends, define the stance and track width with concrete scale detail. The kit includes a 540 electric motor. Radio gear, a battery pack and a charger are required separately. On a paved course or in a truck model setting, the long wheelbase, sleeper-cab body and exposed rear chassis create the look of a working road tractor preparing to couple to a trailer. The build suits hobby sessions focused on mechanical detail, and the finished truck rewards careful driving with visible gear changes and authentic big-rig proportions.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:14 M-B Race Truck Actros MP4, RC assembly kit

€179.99

The 1:14 M-B Race Truck Actros MP4 RC assembly kit brings European truck racing onto the workbench with the shape of the 2019 ETRC machine and the proven TT-01 Type-E platform underneath. Its 441 mm length, 188 mm width and 257 mm wheelbase give the finished truck the long, planted proportions that make a race hauler stand out on smooth on-road runs. The shaft-driven 4WD layout of the TT-01 Type-E chassis gives this model its drive system and easy handling character, while the racing truck body introduces a very different silhouette from a standard touring car. The polycarbonate shell is built as a new 3-part body, separating cab, body and coupler sections for a more defined scale appearance. Height is 194 mm, adding the tall cab profile that makes the Actros MP4 instantly recognizable in motion and at rest. Parts for installing headlight and taillight LEDs are included, with LEDs and light unit required separately. A battery pack, a charger and paints are required separately. On a clean indoor track or a smooth paved surface, the silver molded wheels and truck-specific radial tires suit steady laps and detailed body presentation alike. The sponsor markings, grille emblem and mirror parts give the finished build a race-day look that carries through whether the truck is being assembled, painted or lined up for display between runs.

RC trucks

1:14 MAN TGX 26.540 6x4 RC assembly kit

€519.99

This 1:14 RC assembly kit recreates the MAN TGX 26.540 6x4 XLX as a detailed tractor truck with a strong road presence and a finished cab in Light Metallic Blue. At 526 mm long, 193 mm wide and 301 mm high, the model has the size and stance to make the ladder frame, roofline and fifth-wheel area read clearly during building and driving. The chassis uses aluminum channels and a front-mounted Type 540 motor that drives the rear wheels through a sealed gearcase and propeller shaft joint. Gear ratios of 1:32.49 in low, 1:17.66 in 2nd and 1:10.66 in top gear give each shift a distinct change in running character. Both rear axles are equipped with differentials, and the coupler unit allows connection to a separately available semi-trailer. Large curved mirrors with twin reflective surfaces, MAN EURO 5 plated details and TGX 26.540 door markings add model-specific finish points across the cab. During bench assembly, the painted body sections and metal detail parts create a build with less finishing work on the main cab surfaces. On the floor or on a display shelf, the long wheelbase, dual rear axles and tractor-truck proportions give the model the look of a working highway hauler. Radio gear, a battery pack, a charger and paints are required separately.

RC trucks

1:14 Scania 770 S 4x2, RC assembly kit

€489.99

The 1:14 scale Scania 770 S 4x2 brings modern tractor truck styling into an RC assembly kit with a tall cab, detailed exterior equipment and a realistic 4x2 drivetrain layout. At 469 mm long, 193 mm wide and 315 mm high, with a 272 mm wheelbase, it has the road presence of a European long-haul trailer head when parked on display or coupled for running. The chassis places the motor and transmission at the front, matching the layout of the actual vehicle and giving the model its distinctive tractor truck structure. An aluminium frame supports the build, while new parts recreate the side skirts and auxiliary machinery for this version. The transmission offers 3 forward gear ratios of 1:32.49, 1:17.66 and 1:10.66, adding a mechanical shifting element that suits slow manoeuvres as well as higher-speed cruising. The cab can also be fitted with separately sold LEDs, and it is compatible with the Multi-Function Control Unit MFC-03 for light, sound and vibration functions. A coupler allows connection to separately available semi-trailers, opening up hauling scenes, reversing practice and scale truck line-ups. Radio gear, a battery pack, a charger and paints are required separately. The detailed cab, plated wheels and driver figure give the finished truck a convincing presence whether it is staged as a customised show tractor or driven through yard-style manoeuvres.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Scania 770 S 8x4/4, RC assembly kit

€849.99

The 1:14 Scania 770 S 8x4/4 RC assembly kit brings heavyweight road-truck presence into a large-scale build with a 610 mm length, 196 mm width and 320 mm height. Its unpainted body captures the shape of the Scania 770 S with an injection-molded cab and detailed rear equipment such as the auxiliary machinery tower, fuel tank and air tank for a convincing heavy-haul look. Numerous metal parts are used throughout the chassis, and the suspension uses metal leaf springs to reflect the structure of the full-size vehicle. The 3-speed transmission is built into the model and uses gear ratios of 1:32.49, 1:17.66 and 1:10.66. A coupler unit is fitted for connection to a separately available semi-trailer. Interior parts including a modern-style dashboard and seats are included, and a 1:14 scale driver figure adds another layer of cab detail. Stickers and metal transfers are supplied for body decoration. On the bench, the large dimensions and detailed mechanical layout give the build a strong workshop presence. Once assembled, the model suits realistic truck scenes with a separately available semi-trailer attached, or display settings that show off the cab interior, multi-axle chassis and decorated body. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:14 Team Hahn MAN TGS, RC kit, TT-01E 4WD

€179.99

The 1:14 Team Hahn MAN TGS brings European truck racing into RC form with a detailed cab, racing livery and the TT-01E chassis underneath. Its 3-piece polycarbonate body recreates the broad front, roofline and side sections of the full-size race truck, giving the finished build a strong track presence even before the first run. The subject is based on the Team Hahn Racing MAN TGS, the truck driven by Joachim Hahn to 3rd place in the 2015 European Truck Racing Championship. Crash protection is attached to the bottom of the chassis, adding a dedicated lower guard where the model meets the track surface. The kit also uses special truck rims and profiled truck tires to match the proportions of a racing truck rather than a touring car. Numerous tuning parts are available for the platform, opening the door to later setup changes around the same chassis layout. On the bench, the illustrated assembly manual guides the build of the chassis and body shell, while the painted and decaled cab develops its full race-truck character step by step. On the track, the long, tall truck silhouette and 4WD layout create a very different visual rhythm from a standard RC car, with the MAN TGS shape leaning into every braking zone and corner entry. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Volvo FH12 Globetrotter 420, RC truck kit

€389.99

The Volvo FH12 Globetrotter 420 arrives here as a 1:14 R/C model assembly kit with the tall long-haul cab shape captured in full scale-model form. At 440 mm long, 188 mm wide and 295 mm high, the truck has the stance of a European tractor unit, with the high-roof Globetrotter profile giving the build a clear visual identity on the bench and in motion. Its 272 mm wheelbase sets the proportions for a chassis built around a ladder frame with aluminum side channels, a layout that reflects the structure of a working truck. The front-mounted motor sends power to the rear axle, and the mechanical arrangement gives the underside real substance during assembly as the drivetrain takes shape. A 3-speed transmission brings another layer of control once the model is running, with gear changes handled through a 4-channel R/C setup. The included coupler opens the truck to trailer operation and allows connection with currently available 1:14 Tamiya trailers. Radio gear, a battery pack and a charger are required separately. During a slow pass across smooth ground, the metal leaf springs and friction dampers make the suspension detail easy to appreciate, especially when the chassis settles under direction changes. The finished truck suits display just as naturally, where the FH12 cab lines, wheelbase and tractor layout give the model the look of a classic long-distance hauler.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Volvo FH16 Tow Truck 8x4, RC assembly kit

€1,094.99

The 1:14 Volvo FH16 Tow Truck 8x4 brings heavy recovery hardware into Tamiya's R/C truck range with a long 750 mm chassis, a 195 mm width and a 300 mm height that give the model a commanding road presence. Its detailed cab captures the FH16 shape with molded resin parts, interior features and a photo-etched grille, while the 8x4 layout and recovery body create the look of a full-size heavy tow vehicle built for disabled tractor trucks. Under the body, the ladder frame combines aluminum side channels with resin cross members, and the front-mounted motor drives the 2 rear axles through a propeller shaft. Metal leaf springs, friction dampers, a float-mounted die-cast front axle and reinforced resin rear axles shape the running character, while differential gears in each rear axle help the truck track smoothly through bends. The rear towing section is designed around boom and underlift mechanisms, and it can be operated by radio control when the separately sold Actuator Set 56553 is installed. Headlights and taillights can also be illuminated with separately sold LEDs, and the chassis is compatible with the separately sold MFC-03 multi-function control unit. As an assembly kit, this model suits bench sessions focused on scale detail as much as driving time on the floor or a paved layout. The long wheelbase, multi-axle stance and working transmission give the truck a distinct presence in convoy driving, display scenes and recovery-themed setups. Radio gear, a battery pack, a charger and LEDs are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Volvo FH16 Tow Truck, RC model kit, 8x4

€1,199.99

The 1:14 Volvo FH16 Tow Truck model kit brings a heavy recovery truck format to the workbench with an 8x4 chassis, 4 axles and a steerable double front axle. At 750 mm long, 195 mm wide and 300 mm high, the finished truck has the long, purposeful stance of a full-size tow vehicle, with silver pre-painted cab parts that give the bodywork a clean, uniform finish early in the build. The construction combines an ABS body with an aluminium ladder frame and detailed running gear. Power comes from a front-mounted 540 electric motor and reaches the 2 rear drive axles through a metal cardan shaft, while 2 differentials support smoother cornering. Detailed metal leaf springs and friction dampers shape the suspension layout, and the 3-speed manual transmission can be controlled through suitable radio equipment. The rear crane structure is built with many metal parts, and turnbuckles with chains are supplied for load securing detail. Radio gear, a battery pack, a charger and a servo are required separately. An optional ACU unit is required separately for crane movement. Photo-etched radiator grille parts, chrome rims and the visible cab interior add scale character across display and running sessions. The permanently bolted driver's cab leaves space behind the seats for installation of a multifunction unit, keeping the interior visible while supporting an expanded electronics layout. The tow truck can pick up and tow 1:14 scale model trucks, opening up recovery scenes, depot setups and convoy support runs.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Volvo FH16 XL 750 4x2, RC assembly kit

€484.99

This 1:14 RC assembly kit recreates the Volvo FH16 Globetrotter XL 750 4x2 Tractor as a large-scale road truck with a commanding cab shape and full-bodied presence. At 462 mm long, 193 mm wide and 309 mm high, the model brings the FH series flagship proportions onto the bench and onto the road, with the Globetrotter XL roof profile giving the silhouette its unmistakable long-haul look. The cab uses precise injection-molded parts, and the front grille is rendered with photo-etched detail for a sharper finish at the nose. Interior parts such as the dashboard and seats are included, and a 1:14 scale driver figure adds another layer of realism inside the cab. Customized sections for the exterior are also supplied, including the roof bar, low bar and side bars, so the build can lean into the high-spec tractor-truck style shown by the full-size vehicle. The model is also compatible with Tractor Truck Option Parts for further tuning. On the move, the rear-axle-drive 4x2 layout and front-mounted drivetrain echo the construction of the actual truck. The assembly can be paired with the separately available Multi-Function Control Unit MFC-03 for light, sound and vibration functions. Radio gear, a battery pack, a charger, 2 servos and the Multi-Function Control Unit are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Volvo FH16XL Set, RC truck kit

€1,029.99

This 1:14 Volvo FH16XL set brings RC truck building into a large-format scale model with a clearly named FH16XL cab and the MFC03/KO MC-8 version listed in the supplied data. The scale gives the truck presence on the bench and on the floor, while the kit format turns the model into a focused assembly project rather than a ready-made vehicle. The supplied designation points to a specific set configuration, which helps separate this release from other RC truck variants in the range. Assembly time is stated in minutes in the source data, but no exact figure is provided, so the build is best understood as a staged project built around the included set identity rather than a quick setup. Batteries are not included. Radio gear, a battery pack and a charger are required separately. The source data also identifies this as a powered vehicle within the radio or remote control ground category, placing it firmly in the RC truck field. On a workbench, the 1:14 scale and FH16XL naming support a model that suits careful assembly, finishing and setup. Once completed with the separately required running equipment, the truck fits controlled indoor driving sessions, shelf display between runs, and collection alongside other scale transport models.  Warning! Not suitable for children under 14 years.

Model car kits 1:20

1:20 Honda RA272, plastic model kit

€40.99

The 1:20 Honda RA272 plastic model kit brings a landmark Formula racing car to the workbench in a compact scale that still leaves room for the defining details. The finished model recreates the slim single-seater shape with its open cockpit, exposed wheel layout and the clean, purposeful lines of a mid-1960s Grand Prix machine. The bodywork is paired with visible suspension elements, side mirrors, rear exhaust pipes and the distinctive nose treatment shown on the race car, giving the build a strong period presence once painted and assembled. Car number 11 and Honda markings complete the livery and help place the model firmly in its historic racing setting. Assembly is required, and the stated build time of 600 minutes points to a project with enough stages for careful preparation, finishing and decal work rather than a quick snap-together session. On a desk, shelf or in a display cabinet, the low stance and open-wheel format stand out clearly beside closed-body road and touring cars. The model also suits focused hobby sessions where trimming parts, refining painted surfaces and applying the final race markings are part of the appeal of a classic scale build.

Model car kits 1:20

1:20 Porsche 935 Vaillant-Kremer, plastic model kit

€47.99

This 1:20 plastic assembly model recreates the Porsche 935 Vaillant-Kremer in a compact display size of 235 mm long, 104 mm wide and 95 mm high. The wide bodywork, over fenders and tall rear wing give the finished car the unmistakable silhouette of a late-1970s endurance racer, with the cockpit and exterior lines shaped for a strong shelf presence. The build goes beyond the outer body. Inside, the interior is authentically rendered, and the horizontally opposed 6-cylinder DOHC engine remains part of the display thanks to the removable engine hood. That opening section allows the engine components to stay in view after assembly instead of disappearing beneath the bodywork. New Cartograf decals supply the race livery, and the markings set covers car number 51 and number 4. Solid synthetic rubber slick tires are fitted front and rear, matching the competition look with a realistic surface finish. On a desk, in a display cabinet or alongside other motorsport subjects, the completed model brings race-car detail into a clearly defined 1:20 format. Paints and cement are required separately, and the included stainless steel antenna plus 1 driver figure help complete the final presentation.

Model car kits 1:24

1:24 Honda NSX : Acura NSX, plastic model kit

€51.99

This 1:24 plastic model assembly kit captures the second-generation Honda NSX : Acura NSX in a compact scale that keeps the car's low, technical shape intact. The body measures 187 mm in length, 92 mm in width and 51 mm in height, giving the finished build the same tightly drawn proportions that define the 2015 production car first shown at the Detroit Auto Show. The real NSX was developed under Acura leadership and paired a 3.5-liter V6 with the SH-AWD hybrid system, using 3 electric motors and a 9-speed dual clutch transmission. That engineering background informs the model's character, while the kit focuses the build on the car's aerodynamic form, cooling-led surfacing and lightweight space-frame concept in aluminum and high-strength steel. The body lines, cabin layout and structural theme are translated into a static scale build with clear attention to the original car's technical identity. During assembly, the cockpit interior, door panels, engine area and chassis details create a build with visual depth from multiple angles. The kit contains parts for left-hand and right-hand drive versions, as well as Honda and Acura specifications, which opens different display directions from the same box. Decals, stickers, window masking stickers and metal transfers complete the finishing stage with markings, emblems and reflective trim. Cement, paints and tools are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Honda Prelude (BF1), model car kit

€44.99

The 1:24 Honda Prelude (BF1) model car kit brings a sleek 2-door coupe shape to the workbench with crisp body lines, a fastback-style profile and a detailed cabin that stays visible through the side glass. The finished model reflects the modern Prelude design language with its low silhouette, rear spoiler and carefully shaped front and rear sections. Inside, the right-hand-drive layout adds another layer of realism with a defined dashboard, steering wheel, seats and center console. The rear hatch can be shown open, which gives the build a different display character and draws attention to the cargo area behind the seats. Luggage parts shown in the set support that open-hatch presentation and help create a more lived-in road-car scene. Black wheel styling, low-profile tyre appearance and contrasting trim areas strengthen the sporty look without pushing the model away from its road-going identity. During painting and finishing, the mix of exterior surfaces, window areas and interior components offers a satisfying sequence of detail work across the body and cabin. On a shelf, desk or in a 1:24 vehicle collection, the Prelude stands out through its compact proportions, coupe roofline and hatchback layout, whether displayed closed up or with the rear section opened to show the interior theme  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Honda S600 Cabrio/Hardtop, plastic model kit

€45.99

This 1:24 plastic model kit captures the Honda S600 in the compact proportions that made the original 1964 sports car stand out on road and track. The low body, short overhangs and open-top silhouette give the finished car a crisp period look, whether placed in a display case or set among other classic Japanese vehicles. The subject itself carries unusual engineering detail. Honda fitted the real S600 with a 606 cc 4-cylinder DOHC engine and a motorcycle-style chain-driven rear wheel drive, and that distinctive layout is reflected in the model's suspension treatment. The kit builds on the accurate S800 tooling and adds newly designed parts to depict S600-specific exterior features. Decals and metal transfers have also been newly designed for this release, helping the trim, markings and small brightwork read cleanly at 1:24 scale. Assembly is required, with an indicated build time of 600 minutes. During the build, the alternate body configuration gives a clear choice between open-top character and the closed hardtop profile. That makes the finished car fit equally well into a 1960s road car collection, a motorsport-themed shelf or a focused Honda lineup. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Lancia Stratos Turbo, plastic model kit

€34.99

This 1:24 scale plastic model assembly kit captures the compact, aggressive shape of the Lancia Stratos Turbo in a format that gives the bodywork real presence on the bench and in a display case. With dimensions of 178 mm long, 89 mm wide and 50 mm high, the finished car carries the low, wide proportions of the original, while the chin spoiler, over fenders, roof spoiler and rear wing define its competition-focused silhouette. The cockpit adds another layer of scale realism through the detailed bucket seat and dashboard, and the included full body driver figure gives the interior a clear focal point once seated inside. Steerable front wheels introduce a mechanical feature that changes how the finished car can be posed, especially when the body lines and wheel angle are viewed together. Decals supply the red and green color scheme plus sponsor logos, so the exterior can be finished with the period racing identity shown in the kit design. Assembly is required, and the stated assembly time is 600 minutes. On a workbench, the model supports a focused build centered on body fit, cockpit detail and decal placement. Once completed, the 1:24 scale format suits shelf display, desk display or placement alongside other motorsport subjects in the same scale.

Model car kits 1:24

1:24 Mazda Savanna RX-7, plastic model kit

€28.49

This 1:24 scale plastic model kit recreates the Mazda Savanna RX-7 with the sleek wedge-shaped body, low-profile nose and retractable headlights that defined the 1978 sports coupe. At 183 mm long, 76 mm wide and 55 mm high, the finished model gives the compact proportions of the original car a clear presence on the bench and in a display case. The body is paired with realistic detail across the chassis underside, suspension and interior, so the build carries visual interest well beyond the outer shell. Opening sunroof and headlights add extra interaction during finishing and display, while solid synthetic rubber tires give the completed car a planted look. This updated re-issue also features changed C Parts molding color, revised decals for logos and emblems, and newly included masking stickers to support neater paint separation on clear parts and trim. A driver figure is included for the cockpit, adding another focal point inside the cabin. Paints and glue are required separately. The model suits careful brushwork, detail painting and decal placement, whether the build stays close to the road car's original appearance or becomes a clean showcase of classic rotary-era styling.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 McLaren Senna, plastic model assembly kit

€64.99

The 1:24 McLaren Senna captures the supercar's low, sculpted profile in a plastic model assembly kit that brings its aerodynamic form into sharp display focus. At 198 mm long, 91 mm wide and 60 mm high, the finished model has enough presence to show the deep air channels, stretched tail and compact cockpit in a clear desktop or shelf setting. Its structure follows an unusual approach for this scale, using a single monocoque core with separate body panels added around it, which helps reproduce the layered construction of the original car. The V8 twin turbo engine is depicted with visible surrounding engineering, so the mechanical layout carries as much interest as the exterior lines. The dashboard can be built in either the standard roadgoing position or the streamlined racing position, and the kit can also be finished as European, U.S. or Japanese spec. Metal transfers recreate McLaren logos and other fine markings with a crisp finish. Parts are designed in same-color blocks, which keeps painting stages easier to plan across the build. Assembly takes 600 minutes. Cement and paints are required separately. On the bench, the model suits focused evening sessions; once complete, the rotating wheel and brake disc detail adds extra realism when the car is viewed from low front or rear angles.

Model car kits 1:24

1:24 Mercedes Benz SLR722 McLaren 2006, model kit

€73.99

This 1:24 scale assembly kit captures the Mercedes Benz SLR722 McLaren 2006 with the long hood, compact rear deck and focused supercar proportions that defined the full-size car. The finished model brings those lines into a display format that invites a closer look, especially with opening panels that expose the mechanical and interior detail built into the kit. The SLR722 was introduced in 2006 and took its name from the 7:22am start time of the Moss and Jenkinson car at the 1955 Mille Miglia. Under the opening hood, the model recreates the 5.4L SOHC V8 supercharged engine that powered the original car. The full-size 722 delivered 640 hp and accelerated from 0 to 100 km/h in 3.6 seconds, giving useful context for the aggressive vents, body surfaces and performance-focused shape reproduced here. Synthetic rubber tires add a convincing finish at the road contact points, and metal transfers provide sharp manufacturer emblems for the final build. Assembly is required, with a stated assembly time of 600 minutes. On the bench, the kit suits careful painting, fitting and detailing; once completed, the opening hood and doors make it easy to present the engine bay and cabin in a cabinet, on a desk or alongside other 1:24 road-car models.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Mercedes-Benz 300SL Full-View, model kit

€47.49

The 1:24 Mercedes-Benz 300SL Full-View model kit turns one of the most recognisable sports car shapes into a detailed assembly project with a transparent outer skin. At 188 mm long, 75 mm wide and 53 mm high, the finished car presents the long hood, compact cabin and flowing roofline of the 300 SL while keeping the mechanical structure in sight. This plastic model assembly kit focuses on the relationship between body and engineering. The clear exterior parts frame red interior details, bright trim and the internal layout in a way that a painted shell cannot. The low hood line is supported by a 3-liter inline-6 mounted at a 45-degree angle, a layout taken from the original car. Metal transfers add crisp finishing accents to selected details. Assembly is required, with a stated build time of 600 minutes. On a shelf, desk or display case, the finished model shows different details depending on the viewing angle, from the cabin and door openings to the engine area and chassis structure. The opening panels and transparent body make it suited to close inspection during the build and after completion. Cement and paint are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Mercedes-Benz 500 SEC, model kit

€33.49

This 1:24 scale model kit recreates the Mercedes-Benz 500 SEC with the sleek proportions of the 2-door hardtop and a finished length of 209 mm. The streamlined body gives the car its distinctive grand touring silhouette, while the removable engine hood adds an extra layer of visual depth once the build is complete. Beneath the body, the chassis underside is faithfully depicted with propeller shafts and 4-wheel independent suspension, so the mechanical layout remains part of the model's appeal instead of disappearing from view. The 5-liter V8 is rendered as a visible engine detail, and the shaped interior carries that same attention into the cabin with defined seats and an instrument panel. Updated decals support finer finishing work by recreating dashboard markings, logos, wood panel patterns and seat-surface details. Solid synthetic rubber tires with tread patterns complete the stance and give the wheels a more realistic road-car look. On the bench, the kit suits careful painting and detail work, with the instructions depicting 3 body color options: silver, white and gold. Once assembled, the model brings together body shape, cabin detail and underbody engineering in a format that reads clearly from close range on a shelf or in a display case. Manual included.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan 370Z Heritage Edition, plastic model kit

€49.99

This 1:24 plastic model kit recreates the Nissan 370Z Heritage Edition with the long hood, short rear deck and stripe treatment that define this special version. At 175 mm long and 77 mm wide when finished, the model has a compact display footprint while still leaving room for crisp exterior proportions and clearly separated trim details. The kit can be assembled as either right-hand drive or left-hand drive, which opens the build to different market specifications of the same car. Metal transfers are provided for the Z emblems and side mirror surfaces, adding finer finish detail than molded parts alone. Decals cover more than the exterior stripes, with markings for seat fabric and instrumentation that bring extra definition to the cabin once painted. Masking stickers support cleaner paint separation on the body and clear sections, especially around the light units and window areas. On the bench, the separate interior parts, plated trim pieces and clear lenses create a build with distinct stages of fitting, painting and final detailing. Once completed, the Heritage Edition graphics, boomerang lamp shapes and cockpit treatment give the finished car a strong presence in a sports car lineup or a modern Japanese road car display.

Model car kits 1:24

1:24 Nissan Fairlady 240Z, plastic model kit

€47.49

This 1:24 plastic model kit recreates the Nissan Fairlady 240Z Street-Custom as a classic fastback coupe with a long nose, lowered stance and the tuned details that defined many road-going Z cars of the era. At 172 mm long, 71 mm wide and 52 mm high, the finished model has a compact display footprint while still leaving room for distinct body lines, overfenders and period wheel styling to read clearly. The build goes beyond the outer shape with a realistically rendered 2,393cc inline-6 SOHC engine and triple carburetors, visible under the opening hood. New decals and metal transfers support the finishing stage with model-specific scripts, badges and trim details. The kit also allows a choice between 2 regional specifications: a Japanese version with right-hand drive or a North American Datsun version with left-hand drive. That choice changes the character of the finished car and gives the cockpit and exterior markings a different identity. On the bench, the 2-part RS Watanabe 8-spoke wheels help keep rim painting cleaner and more controlled. Once assembled, the model suits display in a cabinet, on a desk or alongside other 1:24 sports car builds, with the open hood adding an extra viewing angle for the engine bay. Cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan Fairlady 240ZG, plastic model kit

€56.99

The 1:24 Nissan Fairlady 240ZG plastic model kit brings the long-nose coupe form of this classic sports car into a compact 180 x 71 x 53 mm display size, with proportions shaped from intensive research of the real vehicle. Freshly designed parts for this release give the body a focused, model-specific foundation, so the finished silhouette carries the extended front end, flared arches and low roofline with convincing scale presence. Beyond the outer shape, the kit reaches into the car's mechanical and cabin details. The engine is realistically depicted, and the hood opens on a hinge so the front section can be shown closed for a clean profile or raised to reveal the engine bay. Inside, the spartan interior is rendered with the same direct character as the original car, while the chassis underside and suspension are broken down to support accurate assembly of the lower structure. Separate metal-plated parts are provided for window frame sections, headlight cover frames and wheel cover trim, giving the bright exterior details a crisp finish. On the bench, the model suits careful painting, trim work and static display rather than powered running. The finished coupe sits naturally in a cabinet, on a desk or alongside other 1:24 road car builds, where the opening hood, plated trim and detailed underside reward viewing from more than one angle. Cement and paints are required separately.

Model car kits 1:24

1:24 Nissan R390 GT1, plastic model kit

€36.49

The 1:24 Nissan R390 GT1 plastic model kit brings one of Nissan's best-known endurance racers into a detailed static display format. Its low body, enclosed cockpit, front vents and tall rear wing give the finished car the unmistakable shape of a 1997 Le Mans GT1 machine, with the No. 23 Calsonic Xanavi race livery adding the visual character seen on the track. This assembly kit is based on the Nissan R390 GT1 developed by Nissan and TWR for the Le Mans 24 Hour Endurance Race. The original car used a 3.5 liter V8 with 600 horsepower, a transversely mounted 6 speed transmission and rear-wheel drive, all built around a carbon composite monocoque. Its 4 wheel double wishbone suspension linked to horizontally mounted shock absorbers through pushrods and bell cranks, details that help explain the compact, purposeful proportions recreated in the model. The kit is presented as a highly detailed static display model with realistically reproduced interior sections, clear parts and race markings that build up the car's distinctive competition finish. On a shelf, desk or in a motorsport collection, the completed R390 GT1 stands out through its long tail, wide stance and endurance-racing graphics. Assembly is required, and the stated build time is 600 minutes. Paints are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan Silvia K's, static display model

€18.99

This 1:24 static display model recreates the Nissan Silvia K's with the sleek proportions, long coupe roofline and rear-wheel-drive character that defined the 5th generation road car. The finished build brings together the low body, rear spoiler, side mirrors and multi-part glazing for a compact sports coupe that stands out on a shelf or workbench. The assembly kit includes a detailed chassis, interior tub and body shell, with separate steps for cockpit, glazing and exterior trim. The cockpit can be built in either right-hand steering or left-hand steering form, using version-specific dashboard and wiper parts to match the chosen layout. Bucket seats, rear interior sections and clear window parts add depth once the cabin is enclosed. Exterior finishing extends to mirrors, light lenses, trim sections and SILVIA markings, with paint references for single-tone and two-tone body schemes. Assembly is required, and the stated build time is 600 minutes. On the bench, the model suits careful painting, decal work and detail-focused fitting across body, cabin and underbody sections. Once complete, the 1:24 Silvia K's works equally well as a display car in a collection of Japanese sports coupes or as a focused build that highlights period styling and scale realism.

Model car kits 1:24

1:24 Nissan Skyline 2000 GT-R H. T., model car kit

€27.99

The 1:24 Nissan Skyline 2000 GT-R H. T. brings a landmark Japanese performance coupe into model form with a long hood, hardtop roofline and the unmistakable GT-R front end. In the finished build, the quad round headlights, fender-mounted mirrors and rear spoiler give the silhouette a crisp late-1960s to early-1970s presence on a shelf or in a display case. This assembly kit is built around careful body preparation and detail painting rather than motorized functions. The 600-minute assembly time points to a project with room for steady progress across bodywork, trim and small exterior parts. Visual details drawn from the full-size car include chrome-style bumper treatment, grille badging and the SKYLINE 2000GT-R identity at the front. Black wheels and tinted windows add contrast to the silver body presentation shown in the source material, while the 1:24 scale keeps the proportions compact enough for display alongside other sports car subjects in the same scale. On the workbench, the model suits sessions centered on trimming parts cleanly, aligning exterior pieces and refining painted accents around lights, trim and badging. Once completed, the classic 2-door hardtop shape and race-bred GT-R identity give the car a strong display presence that fits collector shelves, desk displays and model car lineups. Tools, cement and paints are required separately.

Model car kits 1:24

1:24 Nissan Skyline 2000GT-R Str. Custom, model kit

€51.99

This 1:24 Nissan Skyline 2000GT-R Str. Custom model kit captures a road-going GT-R shaped by the tuning culture of the 1970s. The hard-top body is paired with period custom parts such as RS Watanabe 8-spoke wheels, a separate front spoiler and a separate oil cooler, giving the finished car the look of a personalized street machine rather than a standard factory specification. The build goes beyond exterior shape with a detailed S20 power unit under the hood. The DOHC 6-cylinder engine is depicted with a strut tower brace and metal air funnels, bringing the engine bay into focus as a display area in its own right. Inside, the cockpit gains extra definition from photo-etched parts for seatbelt hardware, brake discs, pedals and the license plate, while body-side emblems are rendered with metal transfers. Seatbelt stickers complete the interior detailing with a sharper competition-inspired finish. Assembly time is stated as 600 minutes. Cement and paints are required separately. A realistic driver figure adds character to the completed Skyline, and the separate glove and helmet parts allow an additional display accent beside the car. On a shelf, in a display case or as the centrepiece of a classic Japanese car lineup, this kit brings together iconic GT-R lines, street-custom cues and fine finishing work in a format that invites careful painting and detailing.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan Skyline GT-R R32, model car kit

€38.99

This 1:24 scale model car kit captures the 1989 Nissan Skyline GT-R R32 in a version equipped with Nismo customization parts, combining the sharp lines of the classic coupe with tuning details that stand out during assembly and finishing. The body shape, front aero treatment, side skirts and rear wing give the finished car a purposeful road-going stance, while the scale format leaves room for careful paintwork and crisp trim separation. Inside the cabin, the right-hand-drive layout adds another layer of authenticity. The dashboard features a detailed instrument cluster, a center console with auxiliary gauges, and a sport-style steering wheel that reflects the Nismo theme shown across the build. This release differs from previous versions through newly tooled parts created to depict accessories designed by Nissan's tuning division, making it a distinct take on the R32 rather than a simple reissue. As an assembly kit, it also supports a slower, more deliberate build rhythm across body preparation, interior painting and final detail work. On the bench, the model suits focused evening sessions where the cockpit, exterior trim and aero parts can be finished in stages. Once completed, the Skyline GT-R R32 reads clearly as a late-1980s performance icon, with the Nismo-specific details giving the display piece a more specialized look than a standard road car version.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan Skyline GT-R R32, plastic model kit

€19.99

This 1:24 plastic model kit recreates the Nissan Skyline GT-R R32 as a full display car with the sharp coupe silhouette, prominent rear wing and distinctive GT-R identity that made the original such a standout on the road. The finished model brings those proportions into a compact scale format that suits shelf display, close-up viewing and careful finishing work. Construction is divided into clear subassemblies, including the engine, chassis, interior and body, so each stage adds visible structure before the final car comes together. The instruction material shows mechanical areas such as the front axle, steering section and wheel mounting points, giving the build more depth than a simple exterior shell. A clear window insert, exterior mirror parts, wipers and front-end details help define the final look, while decals add the Skyline GT-R markings and trim accents. The kit also provides painting guidance for 5 body colour options, with the interior finished in black across each version. With an assembly time of 600 minutes, the build suits unhurried bench sessions where painting, drying and detail work can be handled step by step. Assembly kit is included. Paints, plastic cement and tools are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan Skyline Sedan 2000 Turbo GT-E S, model kit

€28.49

This 1:24 scale plastic model assembly kit brings back the Nissan Skyline Sedan 2000 Turbo GT-E S with the crisp proportions of the sixth-generation Skyline and a body shape defined by its wedge-like nose and clean sedan lines. At 192 mm long, 73 mm wide and 62 mm high, the finished model has a compact, balanced footprint that reads clearly on a desk, shelf or in a display case. The re-issue updates the model name and adds refreshed decals for logos and emblems, while the body and cabin details stay focused on the character of the 1981 road car. Bucket type seats give the interior a distinctly sporty tone, and the suspension layout is represented with front MacPherson struts and a rear semitrailing arm setup. A driver figure is included for builders who want a more active cockpit look. Solid synthetic rubber tires add texture and visual weight at each corner, helping the finished car sit with the grounded stance associated with this Skyline grade. Painting opens up several period body color directions shown in the instructions, including red, black metallic, gun gray metallic, white, yellow, bright red metallic and silver. The completed model suits a motorsport and road-car collection alike, whether placed alongside other Japanese sedans from the early 1980s or built as a single display piece that highlights Nissan turbo styling from the era.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan Z 2022, plastic model assembly kit

€48.99

This 1:24 plastic model assembly kit captures the sharp coupe shape of the Nissan Z 2022 in a display-friendly format that brings modern sports car styling onto the workbench. At 183 mm long, 84 mm wide and 55 mm high, the finished model has a compact footprint while still giving the body lines, roof profile and proportions enough space to read clearly from every angle. The build offers a choice between Japanese specification with right hand drive and North America specification with left hand drive, so the interior layout can be matched to the preferred version. A separately molded roof is designed to be painted black for Nissan Z livery, which makes the color separation easier to handle during painting. Decals and metal transfers add fine exterior markings, while masking stickers help define the paint demarcation on transparent components with cleaner edges. Assembly kit included. Cement and paints are required separately. On the bench, the model suits careful painting, trim work and detail finishing; once completed, the tread-patterned tires and styled wheels give the coupe a convincing road-going presence. The finished car also sits naturally in a 1:24 display lineup, whether placed as a standalone modern sports coupe or alongside other scale road cars.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Renault Alpine A110 '71, scale model car kit

€47.99

This 1:24 scale model car kit recreates the Renault Alpine A110 in its 1971 Monte Carlo Rally form, pairing the coupe's low body shape with competition details that give the finished build a clear motorsport character. At 161 mm in overall length, the model has a compact footprint that still leaves room for crisp exterior lines, chrome-look trim, rally lamps and period markings. The Alpine A110 was based on the Renault 8 and became known for its lightweight FRP bodyshell, rear-mounted 956 cc 4-cylinder engine and rear-wheel-drive layout. That engineering story carries into the kit through visible mechanical detail, including the engine, front suspension, rear suspension, exhaust routing, undertray sections and interior fittings. The rally version also adds details specific to the event car, such as the dash-mounted odometer and competition lighting. Assembly is required, and the stated assembly time is 600 minutes. On the bench, the kit supports a build that moves between body finishing, chassis work and cockpit detail, with decals for both car No.28, the 1971 Monte Carlo winner, and car No.22, the 3rd-place car. Once completed, the model suits shelf display just as well as close-up viewing, where the special wheels, lamp arrangement and race livery can be appreciated from every angle.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Subaru BRZ (TD8), plastic model assembly kit

€41.99

This 1:24 scale plastic model assembly kit recreates the Subaru BRZ (TD8) as a detailed static display car with compact sports coupe proportions and a finished size of 178 mm long, 74 mm wide and 55 mm high. The body shape carries the low, clean lines of the full-size car, and the aerodynamic detailing gives the model a sharp, technical presence on the shelf. The chassis underside is rendered with propeller shafts, suspension and mufflers, adding substance below the body as well as above it. Front strut and rear double wishbone suspension layouts are succinctly captured, bringing the real car's structure into the build. The model also distinguishes the BRZ from the Toyota GR 86 with specific differences in the front bumper and lights, rear stabilizer direction and other details. Window frames are molded with the window parts, while the right and left roof-top frames are separate parts to simplify masking and painting work. Metal transfers add reflective detail to the door mirrors and rear-view mirror. During assembly and finishing, the masking stickers help define the window and taillight cover areas with cleaner paint separation. The completed model suits display in a workshop, office or collection space, where the open hood, detailed cockpit and plated trim reward close viewing from multiple angles. Cement and paints are required separately.

Model car kits 1:24

1:24 Subaru Impreza WRC Monte Carlo 2005, model kit

€39.99

The 1:24 Subaru Impreza WRC Monte Carlo 2005 model kit brings a well-known rally machine into a compact scale build with competition-focused bodywork and race-day detail. The finished car combines the sharp stance of the Impreza WRC with signature elements such as the hood scoop, roof scoop and large rear wing, creating a model that stands out on a shelf as clearly as it does on the workbench. The kit is supplied as an assembly kit and is supported by a broad set of moulded parts identified across A, B, C, D, E, J, N, P, Q, R, S and T runners. Tyres, 2 x 3 mm poly caps, masking seals and multiple marking elements are part of the build, giving the project the small components needed for wheel fitment, paint masking and livery finishing. The document set also lists separate decal sheets and a tyre decal sheet, which helps reproduce the layered graphics seen on the full-size rally car. Metal transfers add another finishing step for finer exterior details. With a stated assembly time of 600 minutes, this model suits a paced build spread across several sessions, whether the focus is careful body painting, applying the Monte Carlo markings or refining the final display finish. The 1:24 scale also makes the completed car easy to place in a cabinet, on a desk or alongside other motorsport builds without demanding much space.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Subaru Impreza WRX STi, plastic model kit

€25.99

This 1:24 Subaru Impreza WRX STi plastic model kit turns a well-known performance sedan into a detailed display build with a pronounced hood scoop, large rear wing, 4-door body and multi-spoke wheel design. The finished shape carries the compact proportions and purposeful lines that made the WRX STi such a distinctive road and rally-inspired car. The kit develops its detail through separate assemblies rather than a single shell. The underside painting guide marks different chassis areas for body color, XF-16 and X-18, while the brake disc stage adds dedicated wheel-hub parts and decal placements at all 4 corners. Inside the cabin, the dashboard, steering wheel, pedals, side panels and seats are built as their own section before fitting into the body. Clear window parts are masked and painted from the inside, and the lamp units use silver stickers behind the lenses to sharpen the headlight and taillight finish. Assembly kit is included. Paints, cement and tools are required separately. On the bench, the sequence moves from small painted details to a complete sports sedan with visible cabin trim, glazing and exterior accents. Once finished, the model suits shelf display just as well as a close look at the body lines, spoiler, mirrors and trim work that define the Subaru Impreza WRX STi.

Model car kits 1:24

1:24 Taisan Starcard Porsche 911GT2 '95, model kit

€32.49

The 1:24 Taisan Starcard Porsche 911GT2 '95 model kit brings a landmark GT race car to the workbench with the wide, low stance and competition-focused bodywork of the 911 GT2. Riveted overfenders, the distinctive front spoiler with up-turned ends and the large 2-tier rear wing give the finished car the sharp silhouette seen on the 1995 Team Taisan machine. Behind that shape sits a subject with deep racing context. The real car used the rear-engine 911 layout, a 3.6 liter horizontally opposed 6-cylinder engine, twin turbochargers and rear-wheel drive, all wrapped in bodywork refined for GT competition. Tamiya translates that identity into a scale build that focuses on the car's defining visual features and race markings. The included decor helps recreate the Taisan Starcard livery, while the cockpit and exterior details add depth once the model is painted and finished. Assembly time is stated as 600 minutes. Paints are required separately. On the bench, the kit suits careful trimming, painting and decal work; once completed, it fits naturally into a display of 1990s GT racers and Porsche competition machines. The 1995 Japanese GT Car Championship background gives the finished car extra context, with Team Taisan taking the title after victories from each of its 3 entries.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota GR 86, plastic model kit

€41.99

The 1:24 Toyota GR 86 plastic model kit brings the shape of Toyota's modern sports coupe into a focused scale build with crisp body contours, a compact 2-door profile and the GR 86's distinctive front grille. In red finish, the completed car presents slim headlights, black mirror caps, dark window areas and a subtle rear spoiler that give the model a clean, road-ready stance on the shelf. Separate chassis detailing adds substance beyond the outer body. The underside shows molded suspension forms, aerodynamic floor sections, a silver exhaust run and a large rear muffler, so the model carries visual interest even when viewed from below. Black multi-spoke wheels and low-profile tyres reinforce the current sports coupe look, while visible touches such as the shark-fin antenna, rear light treatment and dual round exhaust outlets sharpen the scale impression. Assembly is required, and the stated assembly time is 600 minutes. The build suits slow, careful bench sessions where body preparation, paint selection and detail finishing shape the final result step by step. Once completed, the GR 86 works equally well as a display car in a collection of modern road vehicles or as a standalone build that highlights Toyota coupe styling in 1:24 scale.

Model car kits 1:24

1:24 Toyota GR Supra Custom, plastic model kit

This 1:24 scale plastic model assembly kit recreates the Toyota GR Supra Custom as a detailed static display model with a finished size of 183 mm long, 85 mm wide and 54 mm high. The low, athletic proportions and the tuned exterior give the coupe a strong shelf presence, whether shown in a single-car display or alongside other modern road car builds. The body styling focuses on the custom specification, with spoilers, side skirts and side door garnishes worked into the shape of the car rather than treated as separate visual extras. New F Parts supply the aerodynamic components together with parts for the trunk spoiler and wheels, which helps the build reflect the intended TRD-inspired look in a consistent way. The shaped interior and chassis add further structure to the model, while the suspension detail supports a convincing stance beneath the body. TRD 19-inch aluminum wheels are reproduced in scale, and the new decals carry realistic TRD logo renderings for the center hubs. Metal transfers and masking stickers are included. Cement and paint are required separately. The build also offers a choice of Japan, U.S. and Europe versions, allowing the finished car to be tailored to a preferred regional specification. On the workbench, that mix of body detailing, wheel design and version choice gives the assembly process a clear visual payoff at each stage. Once completed, the model suits display in a cabinet, on a desk or as part of a 1:24 sports car lineup.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 TOYOTA GR Supra, plastic model assembly kit

€44.99

The 1:24 TOYOTA GR Supra plastic model assembly kit brings the latest generation coupe into Tamiya's long-running Sports Car Series with a compact display size of 183 mm long, 85 mm wide and 54 mm high. Its sculpted bodywork carries the GR Supra's long nose, short deck proportions and double-bubble roof into a format that rewards careful assembly and finishing. Separate molding for the bumper, A pillar and front grille helps define the exterior surfaces with cleaner part separation, while the cabin adds a console, dashboard and seats with individual headrest components. The kit can be assembled as Japan, U.S. or Europe specification, using dedicated left- and right-hand drive part positions rather than a single generic layout. The underside is not treated as a flat base: a detailed exhaust system runs beneath the car, and the front and rear suspension are built from multiple parts for added realism. Top-grade Japan-market RZ 19-inch wheels are recreated with 2-piece construction that combines metal-plated and black components, and the tyres carry realistic tread. Metal transfers sharpen small finishing details, and masking stickers help define the window areas during painting. Cement and paints are required separately. With around 600 minutes of assembly time, the kit suits a measured bench session and finishes as a detailed static model for shelf, cabinet or desk display.

Model car kits 1:24

1:24 Toyota GT86, plastic model kit, opening hood

€49.99

The 1:24 Toyota GT86 plastic model kit brings the compact sports coupe into a display scale with a body length of 177 mm and width of 84 mm. Its low roofline, short deck and crisp surfacing are reproduced to reflect the character of the original car, while the opening hood adds a second viewing angle that shifts attention from the exterior to the engine bay. Inside that engine compartment, the boxer engine layout gives the build a clear mechanical centerpiece rather than a closed body shell alone. The underside continues that technical approach with molded suspension and drivetrain detail, so the model carries interest above and below the beltline. In the cabin, the front wheels are linked to the steering wheel, creating a direct relationship between wheel position and cockpit detail when the finished car is posed. Metal transfers are used for manufacturer emblems and mirror surfaces, and metal-plated headlight and taillight fixtures add a distinct finish to the lighting areas. With an assembly time stated as 600 minutes, the kit suits a slower bench session built around painting, detailing and final presentation. On a shelf, desk or display case, the GT86 works equally well with the hood raised to show the engine compartment or closed to emphasize the coupe's clean profile and balanced proportions.

Model car kits 1:24

1:24 Toyota Soarer 2000VR-Turbo, plastic model kit

€21.49

This 1:24 scale plastic model kit recreates the Toyota Soarer 2000VR-Turbo in a compact display size of 192 mm long, 75 mm wide and 56 mm high. The body shape focuses on the coupe's sharp aerodynamic lines, giving the finished car a low, crisp stance that stands out on a shelf, desk or display case. The build goes beyond the outer shell with detailed treatment of the cabin and the chassis underside, so the model rewards close viewing from more than one angle. A sliding sun roof adds a mechanical touch to the finished car, with a choice of steel type or glass type during assembly and an opening and closing function once built. One driver figure is included to complete the cockpit scene. Decals supply the seat patterns and body stripes, helping the interior trim and exterior graphics match the character of the full-size car. On a worktable, the kit offers a focused car-model project with clear visual progress as the body, cabin and running surfaces come together. Once completed, the Soarer suits static display where the roof position, tire texture and stripe details can be appreciated at close range. Cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M151A2 Ford MUTT Truck, plastic model kit

€13.99

The 1:35 US M151A2 Ford MUTT Truck assembly kit recreates the compact military utility vehicle with the distinctive proportions of the M151A2 and the technical character that set it apart from earlier jeep designs. The scale build draws on features named in the vehicle history, including the OHV engine layout, semimonocoque body and 4-wheel independent suspension, giving the finished model a convincing stance for display. The kit can be assembled as an Army version with machine gun or as a Marine Corps version, with version-specific drilling and cutting notes integrated into the build. A driver figure is included, along with parts for seats, spare wheel, jerry can, radio, rear seat and antenna details. The front window can be positioned upright or folded down, and the instructions also show optional accessory fitting choices for different service configurations. Marking and paint guides cover several military schemes, including Arizona National Guard, 3rd Armoured Division, 82nd Airborne, 2nd Infantry Division and U.S. Marine Corps in Japan Camp Fuji. Kit, instructions and decor are included. Assembly time is 600 minutes. On the bench, the model offers a focused build with body work, wheel assembly, detail painting and decal placement spread across clear stages. Once finished, the M151A2 suits military vehicle collections, diorama scenes and shelf displays where the open cabin, spare wheel and service-specific markings can be seen from multiple angles.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII US Ford GPA, plastic model kit

€36.49

This 1:35 plastic model kit recreates the WWII US Ford GPA, the amphibious vehicle often known as the 'seep' for its seagoing jeep layout. The boat-shaped hull, front-engine 4WD configuration and military finish give the completed build a distinctive silhouette that stands apart from standard wheeled transport in a display case or diorama. The Ford GPA shared much of its design with the Ford GPW, including the engine basis, and around 12,800 units were produced by 1943. That historical background gives the model a clear place in wartime vehicle collections while the updated parts bring fresh detail to this release. The open-top structure leaves the cockpit easy to view, so the steering wheel, instrument panel, levers and seating remain visible after assembly. Folded windshield positioning, rear-mounted spare wheel and ribbed body surfaces add further period-specific character. Opening deck hatches expose interior mechanical areas, creating another focal point beyond the outer body lines. The 3 included soldier figures support scene building on a shoreline base, in a convoy setting or in a military display with other 1:35 vehicles and equipment. Assembly time is stated as 600 minutes. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.