RC spare parts & RC tuning
RC spare parts & RC tuning
MoreRC spare parts & tuning parts
Body Mount Extension Set 5,5mm (4)
300054604€7.69
Article number: 300054604 Product: Body Mount Extension Set 5,5mm (4) This newly-designed body mount extension piece and snap pin set allows you to extend body mounts on your RC model car. They are intended to be used on those body posts which have been shortened for use with other bodies. They are compatible with a wide range of major Tamiya touring car and M-Chassis models. Contains 5.5mm Body Mount Extension x4, 6mm and 7mm Snap Pins x4 Usable with 5.5-6mm diameter body mounts. Compatible with TT-01, TT-02, TA05, TA06, TB-03, TB-04, XV-01, FF-03, M-05 and M-06 chassis body mounts.
RC spare parts & tuning parts
Bruiser 4x4 Driver figure
300054416€10.19
Article number: 300054416 Product: Bruiser 4x4 Driver figure Adding a driver figure on a vehicle model adds to its realism. The driver figure of the original Toyota Bruiser is available separately, which can be fitted into the 2012 release of the Toyota Bruiser (RN36). Scope of delivery: 1x Driver Figure (10 pcs) Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
Buggy Champ Ball Diff Set Ⅱ
300054897€50.99
Article number: 300054897 Product: Buggy Champ Ball Diff Set Ⅱ This is a re-issue of a previously limited edition product (Item 84113), this time in our regular Hop-Up Option parts series! This versatile ball differential is compatible with a number of our buggy re-issues, and gives efficient and controllable power. Item Contents/Information • Compatible with Item 58441 Buggy Champ (2009), Item 58452 Sand Scorcher (2010) and Item 47304 Fighting Buggy (2014). • Also includes a 1150 ball bearing, 3mm differential balls (x8), plus 4mm and 5mm screws. • Differential adjustment can be performed with the differential installed in the gearbox. Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
Buggy Light Pod Set for LEDs
300054972€12.49
Article number: 300054972 Product: Buggy Light Pod Set for LEDs Add even more realism to your Tamiya R/C buggy with a light show facilitated by these handy pods! Two different styles are featured, and they are compatible with a range of buggies and separately sold 5mm LEDs. Item Contents/Information • R Parts (Pod) x2 (four each of round and square) • Polycarbonate Lenses (Round/Square) x4 each • Separately sold 5mm LEDs can be fitted and lit up via units such as Item 53909 Tamiya LED Light Unit (TLU-01). • Lenses are supplied on a polycarbonate sheet and require cutting out. • Compatible with WR-02 and GF-01 series chassis using the P Parts (bumper) from the GF-01CB chassis.
RC spare parts & tuning parts
CC-01 Alum. Oil Damper Set (4)
300054541€64.99
Article number: 300054541 Product: CC-01 Alum. Oil Damper Set (4) These aluminum oil dampers are for use with the Tamiya cross-country CC-01 chassis, providing superior cushioning on difficult surfaces. The set features parts to make 4 dampers, with silver color anodized cylinders and dark titanium anodized caps. • Damper Cylinder x4 • Upper & Lower Cylinder Caps x4 each • V Parts x4 • Small parts included for attachment to the chassis. Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
CC-01 Aluminum Motor Mount
300054665€28.99
Article number: 300054665 Product: CC-01 Aluminum Motor Mount Use in place of kit C2 parts, this metal motor mount gives a rigid attachment and has a cooling effect. For use with 16T-20T pinion gears. Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
CC-01 Assembly Univ. Shaft (2) front
300054608€38.99
Article number: 300054608 Product: CC-01 Assembly Univ. Shaft (2) front This is a universal drive shaft that is designed to be used with the Tamiya CC-01 chassis platform. By replacing the standard steel dog bone and joint cup that are used in the base kit the drivetrain of the vehicle becomes more efficient and there is less power loss to the drive wheels. Specs and Features: Contains 2x CC-01 Universal Shafts. Reduce power loss in the drivetrain, giving smoothness and better efficiency. Reduces risk of shafts coming loose. Parts are finished in a color reminiscent of actual road cars, enhancing your model's realism. Compatible with CC-01 Chassis cars.
RC spare parts & tuning parts
CC-01 Barrel Spring Set (3x2) s/m/h
300054666€18.99
Article number: 300054666 Product: CC-01 Barrel Spring Set (3x2) s/m/h This set includes 3 stiffness’s of barrel spring which give your chassis progressive damping, i.e. more resistance the further they are compressed. This gives a smoother off-road ride and better handling of roll. Colored bands show spring hardness. Soft Barrel Spring x2 Medium Barrel Spring x2 Hard Barrel Spring x2 Compatible with CC-01 chassis cars.
RC spare parts & tuning parts
CC-01 Stroke extension Link
300054519€59.99
Article number: 300054519 Product: CC-01 Stroke extension Link Attach this option part to your cross-country CC-01 chassis model for improved suspension performance on rough terrain. It is fitted to the top damper attachment point to provide a much longer stroke from the damper. Set contents • Aluminum Pivot Link Mount x2 • Aluminum Pivot Link x2 • 630 Ball Bearing x2 • 5mm Ball Connector x2 • 3x10mm Screw x2 • 2x5mm Screw x2
RC spare parts & tuning parts
CC-02 Alum. Spur Gear Mount
300054970€16.79
Article number: 300054970 Product: CC-02 Alum. Spur Gear Mount This aluminum component can be used in place of the CC-02 chassis’ standard plastic part, promising boosts to overall rigidity and acceleration. Item Contents/Information • Aluminum Spur Gear Mount x1 • For use in place of the kit-standard plastic A5 component, this mount both improves chassis rigidity and increases drivetrain efficiency, the latter leading to even better drive. • This component is attached using three screws (kit-standard part uses two), for a more secure setup. • Lightweight aluminum part features a stylish gun metal color anodized finish. • Shims are included to fine-tune attachment. • Compatible with CC-02 chassis cars.
RC spare parts & tuning parts
CC-02 Fr. Assy Univ. Shafts (1x A&B)
300054984€36.99
Article number: 300054984 Product: CC-02 Fr. Assy Univ. Shafts (1x A&B) Power up your cross-country capable CC-02 chassis car with these universal shafts, which promise efficient drive and superior durability. Item Contents/Information • Front Universal Shafts A & B x1 each • Universal Axles x2 • Cross Joints x2 • Shafts are crafted in carbon tool steel for superior rigidity, and thus provide efficient rotation and drive. A matte black plated finish gives great realism. • Compatible with CC-02 chassis cars.
RC spare parts & tuning parts
CC-02 Full Ball Bearing Set
300054910€34.99
Article number: 300054910 Product: CC-02 Full Ball Bearing Set Ball bearings are a great first step in tuning your chassis, giving smoother, more efficient power and longer running times in addition to reducing wear and tear on your machine. This handy set includes the right number to fully complete your CC-02 chassis. • 850 Ball Bearings x2 • 1150 Ball Bearings x16 • 1260 Ball Bearings x2 • 1510 Ball Bearings x2 • Compatible with CC-02 chassis models Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
CC-02 Motor Mt. Bridge Spacer
300054971€26.49
Article number: 300054971 Product: CC-02 Motor Mt. Bridge Spacer Make sure your CC-02 chassis motor is fixed securely in place with this new spacer, which sits in between the gearbox and the cap screws which affix the motor, promising an efficient drive. Item Contents/Information • Motor Mount Bridge Spacer x1 • This spacer provides greater rigidity in the gearbox, which translates into more efficient drive. • It also helps brace the gearbox against warping. • Aluminum component features a cool gun metal anodized finish. • Screws and other small parts for attachment are included. • Compatible with CC-02 chassis cars.
RC spare parts & tuning parts
CC-02 SS Adjust Tie-Rod Set
300054929€22.99
Article number: 300054929 Product: CC-02 SS Adjust Tie-Rod Set This set is for use with our brand new CC-02 chassis kit. When fitted in place of the rigid molded plastic link in the kit as standard, the durable stainless steel turnbuckle shafts allow adjustment of toe angle on the chassis to fine-tune performance. Set Contents/Information • 104mm Stainless Steel Tie-Rod x1 • 53mm Stainless Steel Tie-Rod x1 • Adjusters and small parts for attachment are also included. • Compatible with CC-02 chassis cars. Warning! Not suitable for children under 14 years.
RC spare parts & tuning parts
Chassis Protective Sticker Hard 0,3mm(2)
300054499€15.79
Article number: 300054499 Product: Chassis Protective Sticker Hard 0,3mm(2) This is a protective film designed to be used under the main chassis of your favorite R/C vehicle. It's highly adhesive and when stuck to the chassis it provides long-lasting protection against scratches by contacting track surface, and thanks to its transparency will not detract from the model’s appearance. • Thickness: 0.3mm • Contains 180x330mm sheets x2
RC spare parts & tuning parts
Clamp Alu Wheel Hub (4) 5mm blue
300053823€36.29
Article number: 300053823 Product: Clamp Alu Wheel Hub (4) 5mm blue Aluminum wheel hubs fastened with cap screws ensure a very secure attachment. The design ensures that 2 x 10mm stainless steel shafts remain secure when removed. Scope of delivery: 1x Wheel Driver Set (15 pieces) Warning! Not suitable for children under 14 years.