RC tyres
Strong grip on all surfaces: discover our wide range of RC tyres for your RC cars and find exactly the right grip for every terrain! If you would like to find out more, you can read more here.
RC tyres
1:10 24mm 5-Sp.Wheel w/Tire, model wheel set
300053955€25.49
This 1:10 wheel set combines a 24 mm width, a 5-spoke design and pre-mounted tires in a compact replacement pack for compatible model car builds. The matched format keeps visual consistency across the axle pair and gives on-road projects a clean, finished rolling setup straight after fitting. The pack contains 2 wheel and tire units, making it useful for targeted replacement work, front or rear axle updates, or keeping spare running gear ready between sessions. The 5-spoke pattern brings a classic competition look that suits a wide range of bodyshell styles without overpowering the lines of the car. Because the tires are already fitted to the wheels, workshop time can stay focused on installation and chassis setup rather than separate mounting steps. The 24 mm specification also gives builders a clear reference point when matching width to an existing touring car configuration. In regular bench use, this set fits naturally into maintenance routines, rebuilds and visual refreshes for 1:10 on-road models. It also works well as a shelf spare for quick swaps when a running car needs a matching pair back on the track. Warning! Not suitable for children under 14 years.
RC tyres
1:10 Chrome Mesh Wheel, drift wheel set, 24mm
300054021€25.99
This 1:10 drift wheel set combines chrome-plated mesh rims with Super Driftech tires in a format built for smooth, controlled sliding on touring car chassis. The tires are pre-mounted, so the wheel and tire pair arrives as a ready-to-fit assembly, and the 24 mm width follows a common touring car standard for straightforward use on compatible platforms. Super Driftech tires use a low-friction resin compound that changes how the car breaks traction, making drift inputs easier to hold and helping reduce tire wear during repeated runs. The mesh wheel design adds a bright metallic finish and a dense multi-spoke look that suits drift and on-road body styles. Compatibility data names a broad range of Tamiya chassis, including TA08 PRO, TA07 MS, TA07 PRO, TA06, TA05 ver.II, TB-05 PRO, TB-04, TB-03, TT-02D, TT-02 TYPE-SR, TT-02 TYPE-S, TT-01D TYPE-E and TT-01 TYPE-E. Used as a replacement pair or as part of a drift setup, the 2 included wheels support quick changes between running styles on 1:10 touring cars. They suit bench setup, tuning sessions and trackside swaps where a pre-mounted wheel and tire combination saves time and keeps the focus on chassis balance and slide control. Warning! Not suitable for children under 14 years.
RC tyres
1:10 Drift Wheels/Tires Type D, RC wheel set
300051219€25.49
This 1:10 wheel set combines Type D drift tires with gold 10-spoke wheels in a ready-to-fit pair built for sideways R/C driving. The mounted construction puts the tire and rim together from the start, and the 26 mm format suits the proportions used by many touring car based drift setups. The tire structure uses a rubber base mixed with a special resin compound. That material combination is designed to produce realistic drift slide action instead of high-grip running, so the car can break traction and hold a controlled line through corners. The smooth, low-profile shape supports the drift look shown by full-size street and circuit builds, while the gold multi-spoke wheel design adds a strong visual contrast against darker bodyshell colours. The set contains 2 drift wheels. Compatibility is stated for TT-02RR, TT-02D, TT-02, TT-01D TYPE-E and TT-01 TYPE-E chassis, and it is also intended for most 1:10 touring car chassis. On a drift conversion, as a replacement pair, or as a visual update for an existing chassis, these mounted wheels change both handling character and stance in one step. Warning! Not suitable for children under 14 years.
RC tyres
1:10 M-Chassis Inner Sponge Kit, tire inserts
300053204€5.09
This 1:10 M-Chassis Inner Sponge Kit supplies 4 grey tire inserts sized for M-Chassis tires. Fitted inside the tire, each open-cell foam insert supports the carcass from within and helps the tread surface meet the ground more evenly during running. The insert shape is intended to be formed into a circular profile and matched to the hoop, creating a more uniform internal support around the tire. That even grounding across the tread surface helps limit irregular contact and can reduce uneven wear over time. The set is intended for builders tuning the feel and consistency of an M-Chassis setup rather than changing the outer tire itself. The scope of delivery contains 4 tire inserts. On a complete 4-wheel build, the matched set allows the same insert specification to be used at each corner. This suits maintenance, replacement, or setup work on 1:10 M-Chassis models where tire support and tread contact are part of the handling balance. The inserts cannot be used for 60D tires. Warning! Not suitable for children under 14 years.
RC tyres
1:10 Medium-Narrow Soft Inner Foam, tire inserts
300053434€8.99
These 1:10 tire inserts are designed for 24 mm wheels and medium-narrow tires, using soft inner foam to tune how the tire supports the car on the track. The blue color identifies the firmness immediately, which helps when several setup options are being compared during a session. The internal shape is matched to medium-narrow tire formats, so the insert sits correctly inside the tire rather than acting as a generic ring. In low road temperatures, the softer foam allows the tire to generate more traction, which can help the chassis find grip earlier in a run. On technical routes with frequent direction changes, that softer support can make the car feel more settled as it loads and unloads through linked corners. The set contains 2 inserts for use in combination with suitable tires and wheels. The firmness choice also affects wear and balance: a tighter insert reduces traction, while a softer insert increases traction and can lead to faster tire wear. That makes this pair a useful tuning option for racers adjusting a 1:10 setup to changing track conditions, especially when grip, temperature and corner density all influence the final handling feel. Warning! Not suitable for children under 14 years.
RC tyres
1:10 MN/24mm Hard Inner Sponge, tire inserts
300053435€8.99
These 1:10 MN/24mm Hard Inner Sponge inserts are made for 24 mm wheels and medium narrow tire formats, giving on-road RC setups a firmer internal support. Each pack contains 2 black inserts that sit inside the tire and shape how the tire deforms under acceleration, braking and steering inputs. The hard compound creates a tighter feel than softer inserts by limiting how much the tire compresses. That setup can be useful when a more direct response is needed through linked corners and technical sections. The internal shape is matched to medium narrow tires, so the insert supports the tire carcass across its width instead of leaving the tread unevenly backed. Tuning with inserts changes the balance between grip, wear and steering feel, and this pair offers a clear hard option within that setup process. Compatibility covers a broad group of 1:10 touring and chassis platforms including TA07 PRO, TA08 PRO, TA07 MS, TA07 MSX, TA06, FF-04 EVO, FF-03, TB-03, TB-04 PRO, TB-05 PRO, TB-Evo.6, TB-Evo.7, TC-01, TRF419, TRF420, TT-02 TYPE-S, TT-02 TYPE-SR and F103GT. Used with matching tires and wheels, the inserts help refine handling for track sessions where small setup changes are easy to feel. Warning! Not suitable for children under 14 years.
RC tyres
1:10 Off-Road Tires High Lift, RC tire set
309400462€42.49
This 1:10 Off-Road Tires High Lift set brings a purposeful off-road look to compatible RC models with 4 loose tires in a 26 mm size and a pronounced tread pattern cut for uneven ground. The black rubber form and white sidewall lettering create a scale-style finish that reads clearly once the tires are mounted on a matching wheel setup. Each tire is supplied unmounted, so the set suits replacement work on an existing chassis as well as custom builds that need this specific tire format. The tread blocks are spaced and raised to give the contact patch more edges across dirt, gravel and rougher terrain, while the matching set of 4 keeps the running gear visually consistent across the whole vehicle. Sidewall markings reading ROCK CRUISER M/T and TAMIYA add another layer of model detail without changing the tire's core function. Mounted on a trail truck, crawler-style build or another compatible 1:10 off-road chassis, the set changes both stance and surface character through its taller, more rugged tire profile. For workshop use, shelf spares or a fresh wheel conversion, this tire pack focuses on one clear job: renewing the look and ground contact of a compatible RC vehicle. Warning! Not suitable for children under 14 years.
RC tyres
1:10 Racing Inner Sponge 26 mm, tire inserts
300053113€5.09
These 1:10 Racing Inner Sponge 26 mm tire inserts are designed for 26 mm wide touring car tires and give the tire a defined internal support shape. The soft sponge construction is formed into a circular ring before fitting inside the tire, where it helps the tread surface sit evenly across the road contact area. That even support is the key working principle here: the insert fills the tire interior so the tread can meet the surface more uniformly during running. The set includes 4 grey narrow inserts, making it suitable for a complete vehicle refresh or a fresh tire build. Compatibility covers F103GT, MF-01X, TT-02RR, TT-02, TT-01 TYPE-E, XV-02PRO, XV-01 and XV-01 PRO chassis. For XV-01 chassis and XV-01 PRO chassis, the inserts also match tire references 50419, 50454, 50476, 50810, 53214, 53220, 53224, 53227, 53293 and 53294. In workshop use, these inserts suit routine tire preparation before club running, setup changes between surfaces, or replacing worn internal foam during maintenance. The 26 mm format and narrow profile make them a focused choice for drivers building a consistent tire package around supported chassis and tire combinations. Warning! Not suitable for children under 14 years.
RC tyres
1:10 Racing Medium Tire Inserts, RC accessory
300053156€5.09
These 1:10 Racing Medium tire inserts are built for 26 mm wide narrow touring car tires and add a defined foam structure between wheel and tire. The dark grey inner sponge is shaped to be formed into a circle and placed inside the tire hoop, where it supports a more consistent tread profile across the running surface. The set contains 4 inserts and uses a stiffer setting than OP113. That firmer density changes how the tire sits under load, helping the tread contact the surface more evenly instead of concentrating pressure on a smaller area. Tamiya specifies these inserts for F103GT, MF-01X, TT-02RR, TT-02, TT-01 TYPE-E, XV-02PRO, XV-01 and XV-01 PRO chassis. For XV-01 chassis and XV-01 PRO chassis, compatible tires listed in the data are 50419, 50454, 50476, 50810, 53214, 53220, 53224, 53227, 53293 and 53294. On a fresh build, a maintenance bench or a setup change before the next run, the inserts give 1:10 tire tuning a clear mechanical step. Swapping foam density can help adapt the tire shape to track conditions, while the 26 mm narrow format keeps the fit aligned with the intended touring car tire size. Warning! Not suitable for children under 14 years.
RC tyres
1:10 Racing Radial Tires, RC tyre set, 24mm
300051023€14.29
This 1:10 tire set brings a racing radial tread and 24 mm width to on-road RC setups, giving touring cars a street-style profile suited to paved running. The pack contains 2 tread tires, making it a straightforward replacement choice when an existing pair is worn or when a chassis needs a different rubber setup for circuit use. The fitment list covers a broad span of Tamiya platforms, including TA07 PRO, TA08 PRO, TA06, FF-04 EVO, FF-03, TB-03, TB-04, TB-05 PRO, TB-Evo.6, TB-Evo.7, TC-01, TRF419, TRF419X, TRF419XR, TRF420, TRF420X, TT-02 TYPE-S, TT-02 TYPE-SR, TT-02RR and F103GT chassis. The stated wheel references include 50892, 50894, 51022, 51046, 51072, 51299, 53453, 53468, 53471, 53473, 53475, 53859, 53860 and 53434. That range makes the set useful both as a fresh running pair and as a workshop spare matched to supported wheel options. Mounted on a compatible touring chassis, the radial tread and 24 mm format suit practice laps, setup sessions and replacement work between runs. The 2-tire pack also fits neatly into a pit box for keeping a prepared spare pair close at hand on race day or club evenings. Warning! Not suitable for children under 14 years.
RC tyres
1:10 Racing Radial Tires, RC tyre set, 26mm
300050419€13.79
These 1:10 Racing Radial Tires bring a low-profile road look and a 26 mm width to compatible RC car setups. Supplied as 2 tyres, the set suits replacement work on worn running gear or a fresh build stage where the wheel and tyre combination needs the correct width for the chassis in use. The tread pattern uses a road-style radial layout, and the sidewalls carry moulded detail that gives the set a scale appearance even off the car. Compatibility is stated for F103GT, MF-01X, TT-02RR, TT-02, TT-01 TYPE-E, XV-01 and XV-01 PRO chassis, covering several established on-road and rally-based platforms in the Tamiya range. As an accessory set, the focus stays on fitment and tyre format rather than on a complete running package. In workshop use, the pair can be kept ready for routine maintenance, chassis-specific setup changes or replacing worn rubber before the next session. On a finished model, the low-profile form and realistic sidewall markings support a clean touring-car stance that matches modern road and racing body styles. Warning! Not suitable for children under 14 years.
RC tyres
1:10 Racing Slick Tires, RC tire set, 30 mm wide
300050547€16.49
Built for 1:10 model use, this RC tire set combines a 30 mm wide racing slick format with matching inner inserts for track-oriented wheel setups. The smooth tread surface and wide profile give on-road builds a focused, competition-style look while the paired insert construction supports the tire shape once fitted to a compatible wheel. The set contains 2 tires and 2 tire inserts, making it suitable for one axle rather than a full 4-wheel change. The inserts are fitted inside the tires before mounting, where they form the internal support ring that fills the carcass. The instruction data specifies gluing the insert ends together with synthetic rubber cement and then fixing the mounted tire to the wheel with instant cement. Wheels are not included. A compatibility note in the data names 2-piece wide mesh wheels as a usable wheel type. This format suits maintenance, replacement and setup changes on 1:10 RC cars where a wide slick pattern is required. It can be used to refresh worn running gear, prepare a second wheel set, or tune a model for smooth on-road sessions with the correct compatible rims and adhesives. Warning! Not suitable for children under 14 years.
RC tyres
1:10 Racing Slickreifen Med.24,5mm, RC tyres
300051049€12.29
These 1:10 racing slick tyres are built for on-road RC setups that need a clean, treadless contact patch and a measured medium compound. The 24.5 mm format targets narrow touring car applications, giving builders a clear option when matching tyre width to wheel choice for circuit use. The set contains 2 tyres and is listed for a broad range of chassis, including TA07 PRO, TA08 PRO, TA07 MS, TA07 MSX, TA06, TA06 PRO, TA06 MS, FF-04 EVO, FF-03, FF-03 PRO, TB-03, TB-04, TB-04 PRO, TB-05 PRO, TB-Evo.6, TB-Evo.6 MS, TB-Evo.7, TA05 Ver.II, TC-01, TRF419, TRF419X, TRF419XR, TRF420, TRF420X, TT-02 TYPE-S, TT-02 TYPE-SR, TT-02RR and F103GT. Compatible wheel references named in the data include 50892, 50894, 51022, 51046, 51072, 51299, 53453, 53468, 53471, 53473, 53475, 53859 and 53860. For workshop stock, club racing preparation or a fresh tyre change before the next on-road session, this pair supports quick replacement on compatible touring car builds. The medium compound and narrow 24.5 mm profile make it easier to tune a chassis around track conditions, wheel selection and the handling balance needed for repeated laps. Warning! Not suitable for children under 14 years.
RC tyres
1:10 Radial Tires M2, RC tire set, 26 mm medium
300053227€16.29
These 1:10 Radial Tires M2 bring a road-style tread pattern and a medium compound to compatible RC chassis, combining a direct fit with added surface texture for running on rougher ground. The 26 mm slim format suits on-road wheel setups where a narrower tire width is required, and the radial pattern gives the contact patch a different character than a plain slick. The tire compound matches the OP224M2 slick tire, while the tread pattern is tuned for surfaces such as quicksand roads and coarse parking lots. Compatibility covers F103GT, MF-01X, TT-02RR, TT-02, TT-01 TYPE-E, XV-02PRO, XV-01 and XV-01 PRO chassis, so the set can slot into several established 1:10 platforms. The scope of delivery contains 2 tires, supplying a matched pair for one axle. The black rubber construction and directional street-style tread also give scale builds a purposeful, realistic look when mounted. In a workshop setup, this pair works well as a replacement when a compatible chassis needs fresh rubber for mixed paved surfaces. On a running session across uneven asphalt or dusty parking areas, the patterned tread and medium compound support a controlled, planted feel compared with a worn tire set. Warning! Not suitable for children under 14 years.
RC tyres
1:10 Rally Block Tire Soft, RC tire set, 26mm
300054861€11.79
This 1:10 Rally Block Tire Soft set brings a dedicated rally tread and a softer compound to touring car based RC builds that need more grip in cooler running conditions. With a 26mm width, the tires suit wheel formats such as 53232 and 53914, while the included inserts support the tire shape from the inside during running. The block pattern uses clearly defined tread sections instead of a slick surface, which changes how the car puts power down on loose or mixed terrain. Each pack contains 2 tires and 2 inserts, and the inserts are the same type supplied with 53133. That makes this set a straightforward replacement or setup change when a chassis is being tuned for different surfaces or temperatures. The tires are supplied in a re-openable zippered bag for storage between runs and workshop sessions. Mounted on a rally or touring car conversion, the softer compound can help the chassis settle into cooler track conditions where a harder tire may struggle to generate the same hold. The set also works as a practical spare for maintenance benches, setup boxes and race-day parts kits where matching tread and insert combinations matter.
RC tyres
1:10 Rally Block-Type Tires, RC spare tires
300050476€16.49
These 1:10 Rally Block-Type tires bring the look and running feel of a rally setup back to RC cars that need fresh rubber. The pair uses a cross block tread pattern that is shaped for grip on loose and uneven ground, while the black rubber construction gives the contact patch the flexibility needed for changing surfaces. Each pack contains 2 tires and is intended as a stock replacement for many Tamiya Rally kit R/C cars. The tire size fits standard Tamiya touring car wheels with 26 mm width, which makes this set a direct choice when an existing build needs matching replacements rather than a change of wheel format. Compatibility is stated for the MF-01X, TT-02RR, TT-02, TT-01 TYPE-E, XV-02PRO, XV-01 and XV-01 PRO chassis, covering several popular rally and touring based platforms. The block tread suits running sessions on dusty paths, compacted gravel and other mixed outdoor surfaces where a smoother pattern can struggle to hold a line. Kept as a spare set in the workshop, the 2-tire pack also helps restore a worn front or rear axle with the same tread style used on many Tamiya rally builds. Warning! Not suitable for children under 14 years.
RC tyres
1:10 Slick Tires M2, RC tyres, 26 mm medium
300053224€17.29
These 1:10 Slick Tires M2 tyres bring a medium grip level to on-road RC tuning, positioned between super slick and racing slick compounds. The 26 mm slim format suits narrower wheel setups and gives a clear starting point for drivers adjusting traction on paved surfaces. The medium compound is described for controllability during sliding and on oiled road surfaces, so the tyre choice supports smoother correction when grip changes across the track. As slick tyres, the tread surface stays uninterrupted, which keeps the contact area focused on sealed, prepared ground rather than loose terrain. Compatibility spans F103GT, MF-01X, TT-02RR, TT-02, TT-01 TYPE-E, XV-02PRO, XV-01 and XV-01 PRO chassis, covering touring, rally and GT-based platforms that use this tyre size. The set contains 2 tyres for a matched axle setup. They suit bench-stock spares, chassis refreshes and compound changes before club running sessions, especially when a setup calls for a step between very low and higher grip slick options. On a practice day or a prepared circuit, this pair gives a straightforward way to tune response with a size and fit aimed at established 1:10 Tamiya platforms. Warning! Not suitable for children under 14 years.
RC tyres
1:10 Tire Bag 58154, RC tyre set, 4 tyres
309445529€26.29
This 1:10 tyre set brings fresh running gear to compatible RC vehicle builds with 4 black rubber tyres in 26 mm width. The deep off-road tread gives each tyre a pronounced block pattern, creating a clear mechanical contact surface for loose terrain, rough tracks and uneven ground where worn tread can reduce control. The hollow construction shown by the open inner profile identifies these as dedicated replacement tyres rather than decorative display parts. Tire Bag 58154 is suited to maintenance, rebuilds and parts-box planning when a full matching set is needed across all 4 corners. The rubber material and chunky groove layout focus the set on grip-oriented running, while the uniform shape across the pack supports consistent handling compared with mixing different tread patterns on one chassis. In workshop use, the set can be kept ready for routine tyre changes after repeated outdoor sessions. On a compatible 1:10 RC model, the 26 mm format and off-road pattern suit builds that return to dirt, gravel and similarly uneven surfaces where clear tread definition matters during running. Warning! Not suitable for children under 14 years.
RC tyres
1:10 Tire Set, model accessory, 26 mm pair
309805481€21.49
This 1:10 tyre set brings rugged tread and recognisable sidewall styling to a model vehicle setup in one focused replacement pair. Each tyre measures 26 mm, and the 2-piece pack suits builds or repairs that need matching rolling parts with an off-road character. The tread uses pronounced knobby blocks, a pattern associated with loose-surface driving and scale truck styling. White printed sidewall markings read BFGoodrich and Radial Mud-Terrain T/A, adding a licensed full-size look to the wheel area without extra finishing work. The set is specified for 58132, which makes it a clear match when restoring that model or replacing worn original tyres. As a model accessory rather than a complete vehicle, the set concentrates on one visible area that changes both stance and terrain impression at a glance. Mounted on the intended wheels, the pair suits workshop-style maintenance, shelf refreshes and rebuilds where the original tyre style matters. The black rubber look, raised tread depth and printed sidewalls give an RC chassis or scale truck a more purposeful off-road presence while keeping the fit brief and specific.
RC tyres
1:10 Tires Slick Kit-Type, RC tire set, 2-pack
300050454€14.29
This 1:10 Tires Slick Kit-Type set brings a straightforward way to refresh a touring sedan setup with 2 vinyl slick tires made for 26 mm wheels. The smooth tread-free surface creates lower grip than higher performance Tamiya tires, which makes the pair especially useful when a chassis is being set up for controlled drifting on asphalt or concrete. As stock replacement tires used on many Tamiya touring sedans, this set fits naturally into regular maintenance as well as handling experiments. The vinyl construction and rounded sidewall shape keep the focus on consistent contact and predictable breakaway rather than maximum bite. On hard outdoor surfaces, that lower-grip character can help the rear end step out more progressively, which suits practice sessions where slide control matters more than outright traction. The 2-pack format also covers one axle at a time, useful when balancing front and rear grip with different tire combinations. In use, the pair suits spare-box planning for touring chassis that already run 26 mm wheels, and it also works as a simple route into drift-oriented setups on paved ground. Whether replacing worn originals or changing the handling balance for concrete car park runs, these slick tires add a clear, surface-specific option to a 1:10 wheel setup.
RC tyres
1:10 Wheel-Set 24mm, model wheels, Hard Yellow
300099645€33.99
This 1:10 Wheel-Set in 24 mm Hard Yellow format brings a clear tuning component to model car setup, with 4 matching wheels sized for consistent fitment across a compatible chassis. The yellow finish makes the set easy to identify at a glance when several compounds or spare sets are kept together on the bench. The designation Hard Yellow signals a specific wheel characteristic rather than a general-use replacement, which helps when a build is being adjusted around surface conditions or a preferred handling balance. The 24 mm width gives a concrete reference point for fit, so the set can be matched to the wheel requirements of the model instead of guessed by appearance alone. As a 4-piece wheel set, it suits complete vehicle preparation in one pack rather than piecing together separate singles. Batteries are not included. On a workbench, in a pit box or during routine maintenance, this set supports quick wheel changes and organised parts storage. It also works well as a spare set kept aside for testing different setups on 1:10 model cars, where clear sizing and compound identification save time between runs. Warning! Not suitable for children under 14 years.
RC tyres
1:14 Racing Truck Tires, spare tyre set, 28mm
300051589€13.89
This 1:14 racing truck tyre set brings the proportions and road-focused profile used on the Team Hahn Racing MAN TGS semi-truck into a practical spare set for RC maintenance. The pack contains 2 tyres, each made for on-road racing truck applications and sized at 28 mm wide, with a 70 mm outer diameter and 40 mm inner diameter for the intended wheel fit. The tread pattern and tall sidewall give the tyres a full racing truck stance, while the sidewall height also softens handling reactions compared with lower-profile alternatives. That makes this set a useful choice when replacing worn running gear or preparing a chassis with a calmer steering feel. The tyres are specified for use with Item 51588 wheels only, which defines the intended wheel pairing for correct installation. Compatibility covers several Tamiya chassis platforms: SW-01, TT-02RR, TT-02 and TT-01 TYPE-E. The set suits on-road racing truck builds, workshop spares and chassis refreshes where the correct 1:14 truck tyre format matters. When an on-road track body is installed, 51588 or 54741 can be used in combination on the stated chassis applications. Warning! Not suitable for children under 14 years.
RC tyres
24mm Shaped Inner Sponge, Tire Insert Pair
300053582€9.29
These 24 mm shaped inner sponges are designed for use inside rubber tires on 24 mm wheels, adding a tuning element that changes how the tire supports itself on the track. Supplied as 2 inserts, the set is built for medium narrow tires and uses a green color code to identify the medium firmness setting quickly during setup. The internal shaping matches the tire cavity more closely than a plain ring, so the insert supports the tire from within as load shifts through acceleration, braking and corner entry. Medium firmness sits between soft and hard options sold separately, giving a balanced starting point when the goal is to adjust grip without moving to either extreme. The data also notes a direct handling trade-off: a tighter insert delivers less traction, while a softer insert increases traction and also increases tire wear. Compatibility covers a wide range of on-road chassis including TA07 PRO, TA08 PRO, TA06, FF-04 EVO, FF-03, TB-03, TB-04 PRO, TB-Evo.6, TB-Evo.7, TC-01, TRF419, TRF419X, TRF420, TT-02 TYPE-S, TT-02 TYPE-SR and F103GT. The inserts are used in combination with medium narrow tires and wheels, including available tires 51023, 51049, 53433, 53705 and 54256. Warning! Not suitable for children under 14 years.
RC tyres
24mm/MN Slick-Tires Hard, RC tyre set, reinforced
300022001€26.99
This 24 mm/MN slick tyre set brings a reinforced construction and a hard compound to RC running on warmer surfaces. The 2 tyres are designed for track and road temperatures of about 30 to 50 °C, where the compound suits heated asphalt and other warm driving areas with a smooth, treadless contact surface. Inside each tyre, an inserted fabric belt helps control shape under load. That internal layer is there to suppress deformation rather than change the outer profile, which matters when repeated acceleration, braking and cornering put stress into the carcass. The sidewall carries a molded number 3, so the pair can be identified quickly when several compounds are kept together in a workshop or race bag. Depending on the condition of the road surface, wear can progress faster or slower. The tyre surface can also turn white in use, but the stated performance is not affected. Mounted on suitable RC wheels, this pair fits naturally into setup changes for warm-weather sessions, club racing practice or replacement after track wear. The format suits drivers who sort tyres by compound and surface temperature, then swap sets to match changing conditions during the day.
RC tyres
2WD Rib-Spike F Tires, buggy front tire set
300054896€10.59
The 2WD Rib-Spike F Tires bring a classic Tamiya front-tire pattern back into circulation with a re-issued version of the 60/60 design. Each tire uses a hybrid tread made up of 2 rows of round spikes plus a rib, a layout developed to give 2WD buggies strong front-end bite and a more defined response when the steering is loaded into a corner. This set contains 2 front tires and matches the specification previously sold as Item 53083. The same tire was also used in Item 47381 Super Astute (2018), which makes this release useful for maintenance, replacement, or period-faithful setup work on compatible buggy builds. The rubber construction focuses the contact area at the front axle, where steering accuracy and directional stability matter most on loose or changing track surfaces. Mounted on compatible front wheels from Item 54680, the tires suit 2WD buggy platforms including DT02 and DT-03. They fit naturally into workshop routines that involve replacing worn tread, tuning front grip, or bringing an older chassis back to running condition with the correct front tire pattern for the era.
RC tyres
2x10mm Shaft Wheelhub, spare part, 10-piece set
300050594€3.99
This spare part set supplies 10 wheel carrier shafts in a 2x10 mm size for model maintenance and parts replacement. The metal shafts use a smooth cylindrical shape with flat ends, a format suited to compact mechanical assemblies where a clean, exact fit is essential for the intended wheelhub position. The pack focuses on one clearly specified component rather than a mixed hardware assortment, which makes parts planning simpler during repairs or when preparing spares for future work. With 10 matching shafts in the set, the same size is available across multiple service jobs or rebuild stages. The defined 2x10 mm format also gives a direct reference when checking compatibility against an existing assembly. In workshop storage, identical small parts are easier to sort, group and retrieve than loose mixed fixings. This set fits naturally into routine model bench work, whether a missing shaft needs replacing before the next rebuild or matching hardware is being kept on hand for later maintenance. For hobby rooms, tool drawers and spare-parts boxes, the compact pack adds a precise wheel carrier component that is ready when a compatible assembly calls for it. Warning! Not suitable for children under 14 years.
RC tyres
30mm Egress Front Stud-Spike Tires, RC tire set
319804545€13.99
The 30 mm Front Stud-Spike Tires for Egress bring a focused tread option to the front axle, combining a dense field of raised knobs with a rubber carcass shaped for RC buggy wheel fitment. That studded pattern gives the leading wheels a clear mechanical role on loose and uneven ground, where the front end needs to respond cleanly as steering angle builds. Each tire is formed for front-wheel use on the Egress and arrives as a 2-piece replacement set, making it straightforward to refresh both sides with the same pattern. The rounded spike layout spreads across the full tread surface rather than concentrating grip in a narrow center band, which helps the contact patch stay active as the buggy changes direction. Raised sidewall lettering and the deep black finish give the pair the purposeful look associated with classic off-road RC setups, while the hollow tire body leaves room for wheel mounting in the usual way. On a running chassis, front tires shape how the model enters a corner, follows ruts and settles after quick steering corrections. This set suits maintenance of an existing Egress build as well as setup changes for dirt running, where a matched front pair can make the steering response feel more consistent across repeated laps.
RC tyres
30mm VQS Front Pin-Spike Tires, model tyre set
319804557€14.49
The 30 mm VQS Front Pin-Spike Tires set refreshes the front end with a tread pattern built for loose surfaces and a look that matches classic off-road racing style. Supplied as 2 black rubber tyres, this set is intended for the front wheels and gives worn running gear a straightforward way back to sharper steering feel and cleaner tracking on dirt. The pin-spike layout places evenly spaced traction blocks across the tread, so the tyre can key into dusty ground and broken terrain instead of skimming across the top. Rubber construction lets the carcass flex as the wheel rolls over small ruts and surface changes, which helps the front axle maintain contact where a hardened or worn tyre can start to slide earlier. The 30 mm size is a concrete fit detail for VQS front use, and the 2-tyre pack covers a full front axle change in one set. On a prepared dirt track, a backyard running area or a loose gravel section, fresh front tyres can restore the crisp initial response that makes line placement easier to judge. The pronounced spike pattern also gives a period-correct buggy stance, so the chassis looks as purposeful at rest as it does when carving through dusty corners.
RC tyres
38 mm Egress, rear stud-spike tires, RC accessory
319805536€14.49
These 38 mm rear stud-spike tires for Egress bring a focused off-road tread pattern to the driven end of an RC setup. The black rubber construction and closely spaced round studs create a surface built for loose ground, where repeated contact points can help the model hold its line across dirt, gravel and broken terrain. Each pack contains 2 tires, sized for the rear position and shaped for use where drive traction matters most. The tread wraps across the running surface and continues onto the sidewalls, adding extra biting edges when the chassis rolls through uneven sections or loads up in a turn. The hollow inner opening leaves the tires ready for fitting to compatible rear wheels, making them a practical choice for replacing worn rubber or preparing a fresh running set. On a buggy with an off-road layout, this kind of studded pattern suits tracks with loose top layers, dusty sections and rough patches that ask more from the rear axle. The 38 mm size and rear-specific format make the set easy to place within a maintenance routine, whether the goal is restoring consistent grip after heavy running or keeping spare tires ready for the next session.
RC tyres
BB-01 Rough Ride Buggy Front Tires, 2-Pack
300051716€16.79
The BB-01 Rough Ride buggy front tires are a dedicated replacement set for the BB-01 chassis, supplied as 2 front tires for restoring the correct running setup on an R/C off-road car. Their rib-pattern tread gives the front axle a defined surface layout suited to buggy use, while the molded ROUGH RIDE sidewall logos add the exact visual detail named in the source data. The tire format is focused on the front position rather than a mixed vehicle set, which helps keep parts selection clear when servicing a BB-01 build. The source data also names suitable rims 300051715, giving a direct reference for matching the tires to the intended wheel option. Studio imagery shows 2 black tires with 2 white foam inserts, highlighting the complete tire components used to support shape and contact during running. This makes the set a practical choice for replacing worn front rubber or preparing a fresh wheel and tire combination around the specified chassis platform. On the bench, the pair fits naturally into routine maintenance, rebuilds, or a parts refresh before the next dirt run. Once mounted on the specified front rims, the ribbed tread and Rough Ride styling suit buggy setups that need the correct front tire format for BB-01-based running.
RC tyres
BB-01 Rough Ride buggy rear tires, RC spare set
300051717€22.49
Built for the BB-01 chassis, this rear tire set brings a classic buggy look and a terrain-focused tread to off-road RC running. The package contains 2 rear tires, each made in a large-diameter format with molded ROUGH RIDE sidewall logos that give the wheel setup a distinct period style when the car is viewed from the rear or side. The block pin tread pattern is the key working feature here. Its raised tread blocks create many contact edges across loose ground, helping the rear end put power down on dirt, gravel and uneven tracks. The tires are specified for the rear position, which matters on buggy setups where front and rear tire roles can differ. Suitable rims are listed as 300051715, giving a clear reference for wheel matching when replacing worn parts or preparing a fresh build. Loose tires and foam inserts can be fitted as part of routine maintenance, a tread change before outdoor running, or a visual refresh for a BB-01 chassis already in use. On compact backyard courses, dusty hardpack or rougher open ground, the large-diameter profile and pin-block layout support the kind of planted rear traction that off-road buggy sessions rely on.
RC tyres
Buggy Stud Spike Rear Tires, 87 mm Off Road Pair
300053059€18.79
These rear buggy tires bring a focused setup change for dry off-road running, combining a wide 40 mm profile with an 87 mm diameter and a Stud Spike tread pattern shaped for grip where loose dirt and hard-packed sections demand bite. The short spikes are formed in soft rubber, so the tread can key into the surface and help the rear end drive forward with more authority. Designed for use on Tamiya DT-03, DT-03T, DT-02 and TT-02B chassis, the tires give a clear route to replacing worn tread or tuning a buggy for specific ground conditions. They are intended for wheels 51206, 51262 and 53086, which keeps wheel choice precise when planning a rebuild or preparing spare sets. The package contains 2 tires, making this set suitable for the rear axle named in the designation. On dusty tracks, compacted earth and other dry off-road layouts, the soft rubber compound and short-stud pattern support controlled launches, cleaner drive through loose patches and a more settled feel when the buggy loads up the rear tires under power. For racers and bashers refining chassis response, this pair adds a direct, surface-led tuning option without changing the rest of the drivetrain. Warning! Not suitable for children under 14 years.
RC tyres
CC-01 Mud Block Tires, RC tire set, 1:10
300054735€13.59
The CC-01 Mud Block Tires set brings a focused traction upgrade to 1:10 Cross Country running, with 2 soft compound rubber tires shaped to grip mud and dirt more effectively than a road-oriented tread. The chunky block pattern gives the contact patch more edges to work with when a chassis meets loose ground, helping a model keep moving with cleaner drive on rough outdoor lines. This pair is made for the Tamiya CC-01 chassis and uses a wheel requirement of 26 mm width and 52 mm diameter. The white bead markings identify the compound quickly, which helps when several tire sets are stored together for different terrain conditions. Compatibility covers CC-01 chassis cars except Item 58579 LandFreeder and 58616 Amarok, so the fit stays tied to the stated applications. As a replacement or terrain-specific setup, the pair shifts the running character toward softer surfaces where tread depth and compound choice matter most. On muddy tracks, dirt paths and uneven ground, the tread blocks can dig in where a flatter pattern would skate across the surface. Kept as a second wheel-and-tire setup or fitted for dedicated off-road sessions, this pair supports more confident running when the route turns loose and messy.
RC tyres
CC-01 Rock Block Tire Soft (2), RC tire set
300054598€15.19
The CC-01 Rock Block Tire Soft set brings a larger 94 mm tire diameter and a soft rubber compound to cross-country runs with the CC-01 chassis. That combination gives the vehicle more ground-covering reach over ruts, stones and broken surfaces, while the pronounced block pattern adds the kind of tread bite that suits slower technical sections as well as loose outdoor tracks. Each pack contains 2 Soft Rock Block tires designed as a focused running upgrade rather than a cosmetic change. The larger diameter alters how the chassis meets obstacles, letting the tire contact higher edges sooner and roll across them with less hesitation. The soft compound works with the tread blocks to increase the contact area on uneven ground, which helps the vehicle hold traction when the surface shifts under load. The black finish keeps the look in line with scale off-road builds and trail-focused setups. Compatibility covers CC-01 chassis cars except Item 49490, and the set also fits Items 58372, 58397 and 58415. On dirt paths, gravel sections and rough garden terrain, the tread pattern and 94 mm size support more capable cross-country driving with a clear focus on grip and obstacle handling.
RC tyres
Champ Front Tires, model spare tires, 2-pack
319805108€24.99
Champ Front Tires are a dedicated spare tyre set for compatible model vehicle front wheels, supplied as 2 matching tyres in black rubber. The moulded tread combines rectangular block sections around the running surface with ribbed detailing on the sidewall, giving the pair a purposeful scale look while restoring a clean, even appearance at the front axle. The rubber material allows the tyres to flex onto the wheel and sit with a defined profile once fitted. Embossed TAMIYA lettering is visible on the sidewall, adding an authentic workshop-style detail that suits maintenance, restoration and period-correct replacement on a compatible Champ setup. Because this is a front-tyre pair rather than a mixed wheel set, both sides can be refreshed together for balanced visual matching. The tread pattern is also clearly differentiated from a plain slick surface, which helps preserve the intended character of the model after use or storage. This spare set fits naturally into regular bench maintenance, whether replacing worn originals, completing a rebuild, or keeping a fresh pair ready in the parts box. On a finished model, the matched front tyres help return the stance and detailing of the front end without changing the rest of the wheel hardware. Warning! Not suitable for children under 14 years.
RC tyres
Cross-Spike Rear Tires, RC spare tires, 2-piece
300050450€20.79
Cross-Spike rear tires for the Stad.Blitzer bring a focused spare-parts upgrade to the part of the chassis that works hardest under power. The set contains 2 rear tires, shaped with a wide profile and a pronounced off-road pattern that suits rougher running surfaces and repeated laps where rear grip starts to fade. Each tire uses a studded layout with repeated X-shaped tread blocks across the outer surface. That pattern gives the rubber multiple biting edges as the model accelerates, changes direction, or crosses loose sections. The black rubber construction lets the tread settle into small irregularities in the ground instead of skimming over them, which helps the rear end track more consistently. The sidewall marking SUPER GRIPPER is visible on the tire, adding a clear identifying detail for matching replacement parts. This 2-piece rear set suits maintenance sessions where the original running gear has worn down after regular use on dirt or mixed track surfaces. Fitted to the rear axle of a Stad.Blitzer, the tires support cleaner drive out of bends and a more planted feel when the surface changes from packed sections to looser patches. Warning! Not suitable for children under 14 years.
RC tyres
DB/DF/DT Buggy Inner Sponge Set Rear 62/35
300084201€6.79
This rear inner sponge set is made for 1:10 buggy tyres in 62/35 size and provides the foam support that sits inside the tyre carcass. The 2 porous inserts are shaped for rear wheel use and give the tyre a defined internal form before the wheel is mounted and run. As replacement parts for DB, DF and DT buggy platforms, these inserts match the format used in Tamiya rear tyre sets including 54186 Dual Block Tire K and 54188 Dual Block Tires C. The foam structure compresses inside the tyre as the buggy loads the rear end through acceleration, braking and corner entry, helping the tread stay supported instead of folding unevenly. That makes them a practical choice when rebuilding worn rear tyres, preparing a fresh wheel set or restoring the original feel of an established buggy setup. On track or on loose dirt, the inserts work as the hidden layer between wheel and tyre, where small changes in internal support can affect how the rear end responds. Kept as spares in a pit box or fitted during routine maintenance, this 2-piece set gives a direct way to refresh rear tyre support on compatible 1:10 buggy wheels. Warning! Not suitable for children under 14 years.
RC tyres
DT-03T Aqroshot Truggy Tires, RC spare wheels
319804577€14.29
The DT-03T Truggy Tires 2 Aqroshot set supplies a focused replacement part for the running gear of the Aqroshot. With 2 matching tires in one pack, it addresses one of the most frequently changed wear components on an RC truggy and helps return the model to its intended setup after heavy use. As a dedicated spare for the DT-03T platform, this set is shaped for the Aqroshot rather than as a generic tire option. That matters during maintenance, because a model-specific tire keeps the fit and look aligned with the original truggy configuration. The pair format also suits planned servicing, whether replacing a worn axle set or keeping matching rubber ready in the workshop. For RC owners who maintain a chassis over time, a direct spare like this keeps upkeep straightforward and parts selection clear. The set fits naturally into regular bench maintenance after repeated outdoor runs, when tread wear or surface damage starts to affect the feel of the model. It also works as a practical stock spare to keep on hand before the next driving session, especially when the Aqroshot stays in frequent rotation. Warning! Not suitable for children under 14 years.
RC tyres
Dual-Block Tires 62/25, RC buggy tire set
300054185€19.99
Dual-Block Tires 62/25 bring a fresh tread layout to the front end of compatible RC buggies, combining a dense block pattern with a wide rounded profile for controlled running across changing track surfaces. The set contains 2 front tires and foam inserts, giving the front axle the key contact parts needed for replacement or setup work. The tread is designed for high-traction on-road and off-road tracks, where the closely arranged blocks support a steady contact patch as the buggy turns, accelerates and settles into the surface. The 62/25 size suits front-wheel fitment on a broad range of Tamiya buggy chassis, including TD4, TD2, DB02, DB01, DF-03, DF-02, DN-01, TRF503, TRF502X, TRF211XM, TRF201XMW, TRF201 and TT-02B. The K marking denotes kit standard. For DF-02 chassis and TT-02B chassis, use is specified with 53880. These tires fit naturally into workshop tasks such as replacing worn front rubber before a race day, refreshing a stored buggy for track use, or preparing a second wheel setup for different surfaces. On mixed layouts with compacted dirt, loose top layers or grippy paved sections, the block pattern gives the front end a clear, readable feel through each lap. Warning! Not suitable for children under 14 years.
RC tyres
Dual-Block Tires fr. 62/25 C-Typ, model tyres
300054187€27.49
Dual-Block Tires fr. 62/25 C-Typ are replacement model tyres built around a defined 62/25 size and a block-pattern tread. That combination gives a clear reference for matching an existing running setup while bringing a more structured contact patch to the surface under the wheels. The Dual-Block layout uses separated tread blocks rather than a smooth profile, a detail that suits running conditions where the tyre needs edges and voids across the contact area. The C-Typ designation adds another concrete fit point when checking compatibility against an existing wheel and chassis combination. With 2 tyres in the pack, the set covers one axle as a matched pair, which helps keep left and right tread consistent during maintenance or rebuild work. As wear parts, tyres influence how a model puts power down, rolls through uneven sections and responds once older tread has lost definition. This set fits naturally into routine workshop tasks such as replacing worn rubber before the next run, refreshing a stored chassis, or keeping spare running parts ready between sessions. For model builders who tune by component, the stated size and tread pattern make selection more direct than relying on a generic tyre swap. Warning! Not suitable for children under 14 years.
RC tyres
Dual-Block Tires re. 62/35 C-Typ, model tyres
300054188€26.99
This tyre set brings a clear replacement option for model maintenance with Dual-Block tread and a stated 62/35 C-Typ size. The defined block layout gives the running surface a distinct profile, while the 2-piece pack covers one axle for straightforward rear tyre changes. The ShortDescription identifies these as rear tyres, making the set relevant where an existing model calls for that position-specific specification. The 62/35 measurement provides a concrete reference for matching diameter and width during rebuilds, parts sorting or setup planning. C-Typ format adds another exact identifier when comparing existing running gear with replacement parts. Because the pack contains 2 tyres, it suits routine wear replacement without implying a full vehicle set. No batteries are included. On the bench, this pair fits naturally into regular maintenance work, whether worn tyres are being swapped out before the next run or spare parts are being organised by size and tread type. The marked dimensions and tread pattern also help when checking compatibility against an existing rear wheel setup. Warning! Not suitable for children under 14 years.
RC tyres
Dual-Block Tires rear 62/35, RC tire set, rear
300054186€21.99
This rear tire set brings the Dual-Block tread pattern to 62/35 buggy wheels, giving off road running a planted contact patch on high-traction surfaces. The package contains 2 rear tires, making it a focused replacement choice for restoring the rear end of a compatible chassis after regular track use. The tread uses alternating block shapes across the tire surface, a layout intended to support control on both on-road and off-road tracks where grip levels stay high. The rear-specific format suits buggy platforms such as DB-01 and DF-03, and the compatibility list also covers TD4, TD2, DB02, DF-02, DN-01, DT-03, DT-03T, DT-02, TRF503, TRF502X, TRF211XM, TRF201XMW, TRF201 and TT-02B chassis. The note "K" denotes kit standard, which helps identify this version when matching replacement parts to an original chassis specification. Use with 53881 is stated in the source data. Mounted on a compatible buggy, the 62/35 rear format supports consistent running for practice laps, club racing and general off road sessions. A fresh pair can help bring back the intended feel at the rear axle when the original tread has worn down after repeated use on grippy track layouts. Warning! Not suitable for children under 14 years.
RC tyres
F104 Foamtires rear 44/35, RC rear tyre set
300051385€31.49
The F104 Foamtires rear 44/35 brings a focused rear tyre option to Formula RC chassis that use foam running gear. With 2 sponge tyres in the set, a 44 mm inner diameter and 35 mm width, this pair is shaped for the rear axle and gives a clear replacement path when a chassis needs fresh tyres for the next setup. The stated fit covers F104PRO II, F104 Ver.II PRO, F104, TRF103, TRF102 and TRF101 chassis, making the set relevant across several Formula platforms in the Tamiya range. The listed wheel compatibility with 51378, 54400, 54525 and 54526 helps match the tyres to the correct rear wheel parts before installation. Compared with Option Parts 54168 F104 Sponge Tires B 4435 Rear, this version uses a softer composition, adding another tuning choice for drivers working on rear-end grip and chassis balance. On a prepared circuit, foam rear tyres like these are used where precise setup changes matter, whether replacing worn parts between runs or adjusting the car for different track conditions. The pair format keeps both sides of the rear axle matched, which supports consistent handling during repeated laps and setup testing. Warning! Not suitable for children under 14 years.
RC tyres
F104 Rubber Tires Front Hard, RC tire set
300054198€17.99
F104 Rubber Tires Front Hard brings a focused setup change to Formula RC running, using a harder front compound and belted construction to keep the front axle working on cold winter tracks, indoor carpet and asphalt. The 30 mm wide, 64 mm diameter format is made for F104 rubber tire wheel applications, so the change targets handling rather than the overall layout of the car. The set contains 2 hollow chamber front tires. The harder compound is specified for low-temperature conditions, where extra front grip can be difficult to maintain as track surfaces cool down. Belting helps the tire hold its shape as speed builds, which supports a more even contact patch through long corners and quick direction changes. When paired with F104 Rubber Tires Rear Soft, the setup is intended to produce slight understeer, giving racers a clear way to tune steering balance through tire choice. Compatible wheel sets listed for this tire are 51398, 54201, 54527 and 54528. These tires suit track-day setup work where surface temperature changes the car's balance from session to session. On a cold indoor carpet layout or a winter asphalt circuit, the front axle can be tuned with a direct compound change instead of altering the whole chassis package. Warning! Not suitable for children under 14 years.
RC tyres
F104 Rubber Tires Front, RC spare tyres, 2-pack
300051399€16.99
The F104 Rubber Tires Front set supplies 2 front replacement tires for Formula chassis maintenance, keeping the running setup aligned with the kit-supplied specification. Each tire uses rubber construction with a belted layout, and the set is intended for front-wheel use on compatible on-road racing models. These tires are supplied as hollow chamber tires and are designed for the F104 chassis family as well as TRF Formula platforms. Compatibility is stated for F104PRO II chassis, F104 Ver.II PRO chassis, F104 chassis, TRF103 chassis, TRF102 chassis and TRF101 chassis. Matching wheel references are 51398, 54201, 54527 and 54528, which helps when planning a direct replacement or preparing spare running sets. The product data also states that these tires work best in track temperatures exceeding 95 degrees, while grip levels drop as track temperatures move below 95 degrees. On a prepared circuit, that temperature note makes this set especially relevant for tuning around warmer track conditions and keeping a known front tire specification ready between runs. As a spare part for established F104 and TRF Formula platforms, the 2-tire pack fits naturally into routine chassis upkeep, wheel preparation and replacement planning before the next session. Warning! Not suitable for children under 14 years.
RC tyres
F104 Rubber Tires Rear Soft, RC rear tire set
300054199€19.99
The F104 Rubber Tires Rear Soft set brings a colder-track tuning option to Formula RC running, using a softer rear compound to raise grip when surface temperatures drop. In the pit area or on a winter circuit, that change helps the chassis settle earlier through corners and carry speed with a more planted rear end. The set contains 2 hollow chamber tires for the rear axle. Each tire measures 35 mm in width and 64 mm in diameter, matching the proportions needed for F104 rubber-tire setups. The tire structure is designed to mount to compatible wheel types including 51398, 54201, 54527 and 54528, and the fit also covers TRF103, TRF102, F104Ver.II PRO and TRF101 chassis. When paired with stock front tires item 51399, the balance moves toward stronger steering with oversteer characteristics, giving experienced drivers a clear setup route for low-temperature sessions. This tire set suits track days where ambient conditions change the car's response from one run to the next. A quick rear tire swap can help adapt an existing Formula chassis for cooler practice laps, club racing, or winter indoor running where grip levels differ from warmer conditions. Warning! Not suitable for children under 14 years.
RC tyres
F104 Rubber Tires rear, RC spare tires, belted
300051400€18.99
F104 Rubber Tires rear is a rear-axle replacement set for Formula chassis running, built around 2 belted rubber tires with a hollow chamber design. The tread surface is slick, and the belted structure supports the tire shape under speed, making this set suited to smooth track use where a stable rear contact patch matters through long corners and acceleration zones. The set matches the kit-supplied rear tire format for the F104 chassis family and also fits F104PRO II, F104 Ver.II PRO, TRF103, TRF102 and TRF101 chassis. Scope of delivery includes 2 rear hollow chamber tires. Matching wheel references listed for supported setups are 51398, 54201, 54527 and 54528. The temperature note is specific: these tires work best when track temperatures exceed 95 degrees, while grip drops as temperatures move below that point. That makes this pair a focused choice for maintaining an existing Formula chassis setup for track sessions in warmer conditions. In practice, the rear-specific format supports quick replacement between runs, whether refreshing a race-day car or preparing a spare wheel set for the next session. Warning! Not suitable for children under 14 years.
RC tyres
Front Grooved-Sand Tires, model accessory
319805155€15.99
Front Grooved-Sand Tires is a model accessory set for replacing front running gear with the exact tread style named in the designation. The set contains 2 tires, giving a matching pair for the front axle when an existing build needs fresh rubber or a like-for-like spare. The ShortDescription identifies this set as Front Grooved-Sand Tires and ties it to the reference numbers 58050/58525. That reference pairing helps sort workshop stock, match older instructions or confirm the correct spare during maintenance. Because the data names the tires specifically as front tires, the set is suited to axle-specific replacement rather than a general mixed tire assortment. The grooved-sand pattern is part of the stated designation and preserves the original specification where that exact front tire type is required. This 2-piece tire set fits naturally into routine model upkeep, rebuilds and parts organisation. It can be kept as a spare pair for future servicing or used to replace front tires on a model already in use, with the reference numbers providing a clear check against existing parts records.
RC tyres
Front Tire & Wheel(2), model accessory for 58242
309805618€28.99
This Front Tire & Wheel(2) set is a dedicated model accessory for 58242 and provides 2 matching front wheel units in one pack. Each wheel combines a tyre with a chrome-look rim, giving the front end a clean replacement solution that restores the intended appearance and keeps the model ready for the next run. The tyre sidewall carries the M-TRACTION UTILITY marking, and the tread uses a deep, spiral off-road pattern with large blocks across the contact surface. That layout gives the front axle a more defined bite on loose terrain than a worn tyre, which helps the model hold its line with clearer steering response on dirt and uneven ground. The bright rim finish also changes the stance of the vehicle immediately, making this pair useful when an older set has picked up visible wear. Because the wheels are supplied as front units for 58242, fit and visual match stay focused on that specific model rather than a generic replacement. At the workbench, the pair can be kept as running spares or fitted to refresh a used front end before the next outdoor session. On gravel, packed soil or rough yard surfaces, the pronounced tread pattern and matching rim finish give model 58242 a purposeful utility look while returning the front axle to a complete, coordinated setup. Warning! Not suitable for children under 14 years.
RC tyres
Front Tires Block-Spike, model tyre set, 2 pcs
319805110€15.89
Front Tires Block-Spike is a 2-piece model tyre set shaped for front axle use and defined by a bold knob pattern across the tread. The black rubber surface and moulded sidewall lettering create a purposeful, full-size utility look that suits restoration work, replacement jobs and detail-focused custom builds. Each tyre carries raised markings including Pacing 4, 9.50-20, 4-M/S and Super Gripper, adding visual depth that reads clearly at close range. The block-spike layout gives the tread a rugged profile that fits off-road, agricultural or work-vehicle styling where a plain road pattern would look out of place. As a dedicated front tyre set, these 2 tyres help maintain a matched appearance on the steering axle when worn parts need replacing. The rubber material also allows the tyre shape to sit naturally on compatible wheels while keeping the tread definition visible. This set suits workshop shelves, ongoing rebuilds and older model maintenance where original-style tyre details matter as much as fit. It also works well for custom projects that call for a heavier utility stance and more pronounced wheel detail at the front end.
RC tyres
Gr.C Double-Sided Tape Bag, model accessory
319808234€5.89
The Gr.C Double-Sided Tape Bag is a model accessory for clean, controlled adhesive placement during assembly, repair and detailing work. Its 8-piece contents are arranged in a 6+2 format, giving several separate strips that can be picked up individually instead of being cut from a roll at the bench. The white strip format makes each piece easy to see while aligning small components or preparing mounting points. Separate pre-cut lengths help keep adhesive use measured, especially when a build calls for repeated placement across more than one section. The bagged pack keeps the tape together between sessions and stores neatly with other workshop supplies, so replacement strips remain easy to find when a later adjustment or refit is needed. This format also suits builders who prefer to keep matching adhesive pieces ready for parallel tasks rather than trimming each one from a continuous length. On a workbench, the set supports tidy preparation before parts are fixed into place. During maintenance, the extra strips can be kept aside for follow-up fitting jobs, making the pack useful both for fresh builds and for returning to an existing model later on. Warning! Not suitable for children under 14 years.
RC tyres
Grasshopper II Grooved Front Tires, RC spare tires
319805182€7.19
Grasshopper II Grooved Front Tires are replacement tires made for the front end of the Grasshopper II and supplied as a 2-piece set. The black rubber parts carry a grooved outer profile and a smooth inner opening, matching the form needed for front wheel fitment on the model. This makes them a practical choice when the original front tires show wear, cracking or loss of shape after regular running. The molded groove pattern gives the front axle the correct visual character for the Grasshopper II while restoring the tire shape that the steering end of the buggy is designed around. As dedicated front tires, they are intended for the axle that guides direction changes and sets the model's stance at the nose. The rubber material can flex over the wheel during fitting, and the pair format allows both front sides to be renewed together instead of mixing an older tire with a fresh one. These spare tires suit routine workshop maintenance, a careful rebuild of a used chassis, or a cosmetic refresh of a shelf-kept buggy before the next run. On dirt-themed displays or active RC sessions, the grooved profile helps return the Grasshopper II to its familiar period look with the correct front-end setup. Warning! Not suitable for children under 14 years.
RC tyres
Grasshopper II Spike rear tires, RC spare part
319805183€17.49
Grasshopper II Spike rear tires bring a dedicated off-road tread pattern to the driven end of a compatible RC buggy. The black rubber pair combines small round knobs across the main surface with larger pointed side knobs, creating a clear contact layout for loose ground, dusty paths and uneven terrain where the rear axle needs bite under acceleration. As a 2-piece rear set, these tires suit maintenance, replacement and setup changes on compatible Grasshopper II builds. The rubber construction allows the carcass to flex as it mounts to the wheel, while the tread blocks present multiple edges to the ground as the buggy loads up through starts, climbs and direction changes. The sidewall carries embossed Continental lettering visible on the tire itself. Because these are rear tires, the tread focus stays on the end of the chassis that transfers drive to the surface. On dirt sections, gravelly patches or rough backyard tracks, the spike pattern helps the rear end dig in where a worn tire can start to lose consistency. The matched pair also keeps both rear corners on the same tread style, which matters when refreshing an older runner or preparing a compatible buggy for another session outdoors. Warning! Not suitable for children under 14 years.
RC tyres
Grooved Front Tires 60/21, RC buggy spare pair
309805552€15.99
This spare tire pair brings a clear, grooved front-end setup to RC buggy maintenance, with 2 matching tyres in 60/21 format ready for replacement use. The rubber build and front-specific design focus the change where steering feel, rolling consistency and contact at the front axle matter most during running sessions. The grooved tread gives the tire face a defined pattern rather than a slick surface, which can support a more deliberate front-wheel response on changing ground. As a dedicated spare part rather than a full wheel assembly, the set is suited to planned servicing, worn-tire replacement and keeping a buggy setup consistent across both front corners. The pair format also avoids mixing a fresh tire with a heavily used one on the same axle. The compact size makes the set easy to keep in a parts drawer, field box or workshop shelf alongside other running gear. On a home track, at a club session or during routine bench maintenance, this tire pair fits naturally into the regular cycle of checking wear and refreshing front-end components. It also works well as a backup set kept ready for quick changes between runs when the buggy needs a fresh contact surface at the front. Warning! Not suitable for children under 14 years.
RC tyres
HBR Sponge Tires Rear 3645, rear tire set
300053129€27.99
HBR Sponge Tires Rear 3645 is a rear tire set with 2 foam rubber tires built for F1 circuit use. The sponge compound is specified for permanent rough-eyed, high-grip circuit racing, giving the rear axle a track-focused contact surface when a worn set needs replacement or a fresh pair is prepared for race use. Each tire measures 45 mm in width, with a 64 mm outer diameter and a 36 mm inner diameter. Those dimensions make the set easy to match against an existing wheel and chassis setup before installation. The pair is described for the F103 chassis and can also be used on any vehicle except F103LM, which provides a clear boundary for compatibility instead of a vague fit claim. As a 2-piece rear set, the contents stay focused on the axle that carries drive and corner-exit load in F1-style running. On the bench, the stated measurements help with quick comparison against current race tires and stored spares. At the track, a fresh rear pair supports setup changes for high-grip surfaces where sponge tires are the intended choice. Warning! Not suitable for children under 14 years.
RC tyres
Lunch Box Tire Set, RC spare tyres for 58063
309805213€34.49
The Lunch Box Tire Set is a dedicated RC spare for model 58063 and supplies 4 replacement tyres to bring the vehicle back to its intended stance and running character. Each tyre is shown in black rubber with a wide profile and a pronounced chevron tread, a pattern that suits the tall monster truck look associated with the Lunch Box name while giving the contact surface clear edges to bite into loose ground. Because the set is supplied as tyres only, existing rims from 58063 can be reused during maintenance or a rebuild. That makes the set useful when the original tread has worn down, when an older chassis is being returned to running condition, or when a spare set is kept ready between sessions. The rubber construction adds the flex needed at the tyre surface, and the tread depth gives the wheel assembly a more defined off-road footprint than a road pattern would. On gravel, packed dirt or similar rough terrain, the tyre shape and tread pattern support the visual character and handling style expected from a classic RC monster truck. Kept in the workshop, pit box or parts drawer, this 4-tyre set is a straightforward match for routine upkeep of model 58063. Warning! Not suitable for children under 14 years.
RC tyres
M-05Ra Rally-Block Tires, RC tire set, 2-pack
300051427€11.99
The M-05Ra Rally-Block Tires bring a coarse tread pattern to compact RC chassis that run beyond smooth asphalt. Each black rubber tire uses pronounced tread blocks that bite into loose ground, giving rally-style setups a contact surface shaped for dirt tracks, gravel sections and mixed terrain. This set contains 2 tires and is intended for a broad group of Tamiya chassis: M-08 CONCEPT, M-07 CONCEPT, M-06, M-06 PRO, M-05 ver.II PRO, M-05, M-05 PRO, MF-01X and T3-01. The tire format also works with listed wheel references 50569, 50676, 50972, 51237, 51334, 51394 and 51405. On the MF-01X chassis, the body can be modified when using 60D tires and wheels together, with S combinations 54654 plus 50795 or 51420, M combinations 51236, 51363, 51387, 51467 or 51545, and L combinations 54655 plus 51404, 51451, 51489 or 51496. That makes this tire set a practical choice for restoring worn running gear or preparing a chassis for rougher surfaces. Fitted to a compatible RC car, the block pattern supports steady forward drive where a smoother tread would struggle to find grip. Warning! Not suitable for children under 14 years.
RC tyres
M-Ch. 60 Super Radial Tires, RC tire set, hard
300054999€23.79
The M-Ch. 60 Super Radial Tires Hard set brings a track-focused rubber option to M-Chassis running, with a hard compound developed for warmer road surfaces at 25 to 50°C. In this temperature window, the tire choice is aimed at maintaining usable grip while the radial tread profile keeps the road-going look of an on-road RC setup. Each tire is sized at 60 mm diameter and 25 mm width, giving a clear reference for matching existing wheels and chassis geometry. The sidewall features a molded number 2, so this compound can be identified quickly when several tire types are kept together for setup changes. The data also notes that the tire surface can turn white; this does not affect performance. Wear rate can vary with the condition of the road surface, which makes surface choice an important part of tuning and maintenance. Used as a replacement pair or as a temperature-specific setup option, these 2 tires suit warm-weather sessions on paved running areas where compound choice matters. They fit naturally into a spares box for regular M-Chassis upkeep, test days, and back-to-back comparisons between different tire compounds.
RC tyres
M-Ch. 60D Super Radials Soft, RC tyres 2-pack
300054995€23.79
The M-Ch. 60D Super Radials Soft tyre set brings a road-focused rubber compound to M-Chassis RC cars, with 2 tyres sized at 60 mm diameter and 25 mm width. The soft compound is intended for low to medium road surface temperatures from 8 to 25 °C, where it can help the car settle into paved sections with a more planted feel than a harder tyre in the same conditions. The Super Radial design combines a rounded tyre shape with tread grooves that suit on-road driving, whether the car is being prepared for club running, practice laps or a fresh maintenance cycle. Wear can progress faster or slower depending on roadway condition and temperature, so the compound choice can be matched to the day rather than left fixed across every session. The tyre format is also particularly effective when paired with inner sponge for 60D tyres, which can further support the contact patch and running behaviour. This 2-piece set works well as a replacement when an existing pair has worn down, or as a setup option kept ready for cooler track days. On a clean tarmac circuit, a car fitted with the soft 60D tyres can be tuned around surface temperature and road condition with a more deliberate compound choice.
RC tyres
M-Chassis Inner Sponge 60D Hard, tire inserts
300053255€2.99
These hard 60D inner sponge inserts are designed for M-Chassis 60D tires and give compact Tamiya setups a firmer tire support. Once formed into a circular shape and fitted inside the tire, the sponge helps the tread surface contact the ground more evenly. That more consistent footprint can reduce uneven wear and suits builders looking for a stiffer setting than SP686. Compatibility covers a wide spread of chassis: M-08 CONCEPT, M-07 CONCEPT, M-06, M-06 PRO, M-05 ver.II PRO, M-05, M-05 PRO, MF-01X and T3-01. The set includes 2 hard tire inserts with 4 grey inner sponge pieces. On MF-01X chassis, the inserts can also be paired with 60D tires and specific wheel combinations, with body modification where required. This makes the set useful not only for routine replacement, but also for targeted chassis tuning. On the bench, these inserts support fine adjustments to tire behavior before the next run. They suit rebuilds of worn M-Chassis wheels, setup changes for different grip levels, or preparation of an MF-01X configuration using 60D tire and wheel combinations. Warning! Not suitable for children under 14 years.
The right RC tyres for every model and terrain
When choosing the proper RC tyres, many factors come into play: the terrain, weather conditions, and of course, the type of vehicle. At Tamiya, you’ll find a wide selection of RC tyres for different purposes – from drift tyres to off-road tyres and specialised racing tyres. With the appropriate tyres, you can push your RC model to peak performance and get the most out of every drive.
On-road vs. off-road: which RC tyres are best for your model?
The requirements for RC tyres vary greatly depending on the environment. There are tyres suited for smooth tracks and those designed for rough terrain. Here, you’ll discover which types of tyres are best suited for your RC driving experience.
On-road tyres for smooth surfaces
For use on smooth roads and racetracks, slick tyres and low-profile tyres are particularly effective. These RC car tyres provide excellent grip on asphalt and smooth surfaces, enabling precise control and high speeds. For those who enjoy a more spectacular driving style, there are special drift tyres for RC cars. These tyres offer low grip, allowing the vehicle to slide across the track in controlled drifts.
Off-road tyres for rough terrain
If you prefer driving off-road, you’ll need tyres designed for rough terrain. RC buggy tyres and RC monster truck tyres, like the Wild Dagger tyres, are perfect for maintaining full control on grass, sand, and rocky trails. Off-road tyres with a coarse tread offer better grip, ensuring your RC model doesn’t get stuck on loose ground. Block-spike tyres are specially developed for tough off-road conditions, providing your vehicle with firm traction even on slippery surfaces.
Special tyres for unique requirements
In addition to classic on-road and off-road tyres, there are also specialised tyres for unique applications. For example, M-chassis tyres, such as the M-Grip 60 D, are ideal for smaller RC models, while sand tyres are specifically designed for use on loose, sandy surfaces. These tyres allow you to drive your model car in dunes or on the beach without losing traction.
Tyre accessories and maintenance for optimal performance
To get the best performance from your RC tyres, it’s essential not to overlook the appropriate accessories. Tyre inserts are a vital component for stabilising the tyres and improving handling on different surfaces. They provide extra support and enhance power transmission. Additionally, regular tyre maintenance is important. With the right tyre care products from Tamiya, you can extend the lifespan of your RC tyres and maintain the grip needed for challenging manoeuvres.
RC tyres for every need
Whether you’re racing on a track or tackling rough terrain, the choice of the right RC tyres is key to the success and enjoyment of your model. At Tamiya, you’ll find a large selection of 1:10 RC tyres, RC car tyres, and many other models tailored to your needs. Browse our range and find the ideal tyres to optimise your RC adventure!